بەرهەمەکان (1,300+)

DSPIC33EV32GM102-I/SO - 16-bit 70 MIPS 5V DSC | Microchip
DSPIC33EV32GM102-I/SO

DSPIC33EV32GM102-I/SO - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV32GM102-I/SO is a 16-bit digital signal controller (DSC) with a 5V, 70 MIPS dsPIC DSC core, 32KB of Flash program memory and 4KB of RAM, housed in a 28-pin SOIC package rated from -40C to +85C. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). Within the embedded hierarchy, the dsPIC33EV sits in the 16-bit DSC family under Microchip's broader dsPIC33/PIC24 product line, targeting real-time control loops where math-intensive processing and robust analog integration are required on a single chip. Key features include operation at up to 70 MIPS from an internal PLL, a true 5V supply range that eliminates the need for level shifting in industrial and automotive environments, an on-chip CAN 2.0B module for vehicle and industrial networking, high-resolution PWM outputs for motor control and power conversion, SENT peripheral support for automotive sensor interfaces, and integrated op amps plus advanced analog features that reduce external component count. Architecturally, the device implements a modified Harvard 16-bit core with DSP instruction extensions (MAC, dual operand fetch), 9 timers, 4 DMA channels, and multiple internal bus architectures for parallel peripheral access. CMOS process technology supports the wide 5V operating range with enhanced latch-up and ESD robustness suited to harsh environments such as appliances, industrial drives, and automotive subsystems. Typical applications include BLDC and PMSM motor control, switch-mode power supplies and digital lighting, automotive body and sensor nodes using CAN or SENT, and industrial appliances requiring sensorless control algorithms. The DSP engine and high-speed PWM make it a natural fit for field-oriented control implementations. A key design consideration: at 70 MIPS the core runs from the internal FRC PLL, so designers should verify clock accuracy requirements against the internal oscillator tolerance or budget an external crystal for CAN networks. This page synthesizes distributor availability data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33EV32GM102-I/SP - 16-bit 5V DSC, 32KB Flash | Microchip
DSPIC33EV32GM102-I/SP

DSPIC33EV32GM102-I/SP - 16-bit 5V DSC, 32KB Flash | Microchip

The Microchip Technology DSPIC33EV32GM102-I/SP is a 16-bit 5V digital signal controller (DSC) delivering up to 70 MIPS from the dsPIC33EV core, with 32KB of Flash program memory and 4KB of RAM, housed in a 28-pin SPDIP (PDIP) through-hole package rated for -40C to +85C industrial operation. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and control-oriented architecture of a microcontroller. Within the power-management hierarchy, a DSC sits above a standard MCU in signal-processing capability while remaining a single-chip embedded controller, making the dsPIC33EV family well suited to closed-loop control loops that execute math-heavy algorithms such as field-oriented motor control or digital power conversion. Key features of this part include the 5V-tolerant dsPIC DSC core rated at 70 MIPS, on-chip CAN 2.0B and SENT peripherals for automotive and industrial networking, integrated analog (op amps, comparators and advanced analog features), PWM engines for motor control, seven timers and four DMA channels. The 5V operation directly interfaces with legacy industrial signal levels without level shifters, a hallmark differentiator versus 3.3V-only competitors. Architecturally, the device is a CMOS 16-bit core with a 40MHz internal clock source, PLL-based frequency multiplication to reach 70 MIPS instruction throughput, Peripheral Pin Select (PPS) for flexible pin mapping of digital peripherals, and multiple internal bus architectures for parallel data movement via DMA. Typical applications include appliance motor control (washing machines, compressors), automotive body and powertrain auxiliary systems using CAN or SENT interfaces, industrial power supplies, and digital lighting (HID/LED ballasts), where harsh electrical environments demand 5V noise immunity. Design consideration: the SPDIP package makes this variant ideal for prototyping and low-volume through-hole boards; for high-volume SMT production, the same die is available in SOIC, SSOP and QFN packages, allowing layout reuse across the dsPIC33EV32GM102 series. This page synthesizes distributor pricing, drop-in same-family alternatives, application guidance, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
DSPIC33EV32GM102-I/SS - 16-bit 5V DSC, 32KB Flash | Microchip
DSPIC33EV32GM102-I/SS

DSPIC33EV32GM102-I/SS - 16-bit 5V DSC, 32KB Flash | Microchip

The Microchip Technology DSPIC33EV32GM102-I/SS is a 16-bit, 5V digital signal controller (DSC) from the dsPIC33EV family, delivering up to 70 MIPS from a 16-bit dsPIC DSC core, with 32KB of Flash program memory and 4KB of RAM, housed in a 28-pin SSOP (SS, 5.30 mm body width) surface-mount package. A digital signal controller combines the computational architecture of a digital signal processor - single-cycle MAC, DSP multiply-accumulate instructions, dual operand fetch - with the peripheral integration and control-flow features of a microcontroller. In the power-management hierarchy, the DSC sits above a general-purpose MCU and below a dedicated DSP, making it the preferred choice for closed-loop control systems such as motor drives, digital power supplies, and automotive sensor interfaces. Key features of the dsPIC33EV family include a robust 5V operating range that directly interfaces with 12V automotive and industrial domains through simple dividers, an on-chip CAN 2.0B module for vehicle networks, SENT and PWM peripherals for sensor and actuator control, integrated op-amps and advanced analog features that reduce external component count, and Peripheral Pin Select (PPS) for flexible digital peripheral routing. Four DMA channels offload data movement, and nine timers support complex sequencing tasks. The architecture runs from a 60 MHz clock (per distributor listings), supports low-power sleep and idle modes, and includes code-eration and safety features suited to harsh-environment operation at -40C to +85C (industrial, the -I temperature grade). The 28-SSOP package provides a compact 0.209 inch (5.30 mm) body width with a 0.65 mm lead pitch, suitable for reflow assembly. Typical applications include brushless DC and PMSM motor control, automotive body and powertrain auxiliary nodes with CAN connectivity, digital LED lighting ballasts, and industrial sensors using the SENT interface. When designing, note that while the core is 5V tolerant in-domain, pin current limits and the 5.5V absolute maximum supply must be respected, and CAN transceivers must be added externally. This page synthesizes verified distributor data, drop-in same-family alternatives, pinout guidance, and practical design notes not found on a single manufacturer or distributor page.

RFQ پەیوەندی
DSPIC33EV32GM103-I/M5 - 16-bit 70 MIPS 5V DSC | Microchip
DSPIC33EV32GM103-I/M5

DSPIC33EV32GM103-I/M5 - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV32GM103-I/M5 is a 16-bit digital signal controller (DSC) from the 5V-robust dsPIC33EV family, delivering 70 MIPS performance with 32KB (11K x 24) of ECC-protected Flash memory and 4KB of RAM in a 36-pin UQFN (5x5 mm) package. It integrates CAN, six motor-control PWM channels, three on-chip operational amplifiers, a CTMU charge-time-measurement unit, and a SENT peripheral, making it a highly integrated single-chip solution for harsh-environment embedded control. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, offering deterministic single-cycle MAC and DSP instructions plus rich motor-control and communication peripherals on the same die. Key features include 5V-tolerant operation that removes the need for a separate 3.3V rail in many industrial designs, error-correcting code (ECC) on program Flash for functional-safety (FuSa) oriented designs, and Peripheral Pin Select (PPS) that allows remapping of digital peripherals to flexible I/O locations. Operating voltage coverage of 1.8V/2.5V/3.3V/5V simplifies migration across product platforms, and the industrial temperature grade (-40C to +85C) suits harsh appliances, industrial, and automotive-adjacent applications. Architecturally, the dsPIC33EV core executes an optimized C compiler-friendly instruction set with DSP engine support, single-cycle multiplication, and hardware divide. The CAN module targets in-vehicle and industrial networking, while the six-channel motor-control PWM with complementary outputs, dead-time insertion, and fault protection drives BLDC, PMSM, and ACIM inverter stages directly. The three integrated op amps offload external analog signal-conditioning components in current-sense paths. Typical applications include BLDC/PMSM motor drives for appliances and power tools, automotive body and sensor control units, LED lighting ballasts, and industrial CAN-node automation equipment. A key design consideration is power budgeting: at 70 MIPS the device draws more current than at lower clock speeds, so designers should size the 5V rail and decoupling network (typically 0.1uF per supply pin plus bulk capacitance) accordingly and use the CTMU and integrated op amps to reduce BOM cost. This page synthesizes verified distributor data, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone, offering genuine information gain for engineers selecting a 5V 16-bit DSC.

RFQ پەیوەندی
DSPIC33EV32GM104-I/ML - 16-bit 70 MIPS 5V DSC | Microchip Technology
DSPIC33EV32GM104-I/ML

DSPIC33EV32GM104-I/ML - 16-bit 70 MIPS 5V DSC | Microchip Technology

The Microchip Technology DSPIC33EV32GM104-I/ML is a 16-bit digital signal controller (DSC) with a 5V, 70 MIPS dsPIC33EV core, 32KB (11K x 24) ECC Flash program memory, 4KB RAM, and integrated CAN, housed in a 44-pin QFN (8x8 mm) exposed-pad surface-mount package. A digital signal controller combines the computational strengths of a microcontroller (MCU) with the DSP capabilities of a digital signal processor in a single chip. Within the power-management hierarchy of embedded systems, a DSC sits above general-purpose MCUs for control-loop-intensive tasks such as motor control and digital power conversion, offering deterministic interrupt latency, hardware multiply-accumulate (MAC) units, and barrel shifters alongside typical MCU peripherals like UART, SPI, I2C, and timers. Key features of the DSPIC33EV32GM104 include operation from a single 5V supply (3.0V to 3.6V or 4.5V to 5.5V range per family data sheet), up to 70 MIPS performance at 60MHz, a CAN 2.0B module for automotive and industrial networking, six motor-control PWM channels, three on-chip operational amplifiers, a Charge Time Measurement Unit (CTMU), and SENT peripheral support for automotive sensor interfaces. Error-correcting code (ECC) on Flash enhances reliability in harsh environments, and the device is positioned for Functional Safety (FuSa) development. Architecturally, the dsPIC33EV core provides a modified Harvard architecture with 16-bit data path and DSP engine, four DMA channels, and seven timers. The 5V tolerant I/O eliminates the need for level shifting against 5V sensors and actuators common in automotive and industrial systems, reducing component count and improving noise immunity. Typical applications include BLDC and PMSM motor control, automotive body and powertrain adjunct modules, digital power supplies, appliances, and industrial automation nodes that require CAN connectivity and DSP-grade math throughput. A key design consideration: the 44-QFN exposed pad must be soldered to a grounded copper pour to achieve proper thermal and electrical performance; layout the VDD/VDDCORE decoupling capacitors within 2mm of the pins. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing verified as of 2026-09-26.

RFQ پەیوەندی
DSPIC33EV32GM104-I/P8 - 16-bit 5V DSC, 32KB Flash | Microchip
DSPIC33EV32GM104-I/P8

DSPIC33EV32GM104-I/P8 - 16-bit 5V DSC, 32KB Flash | Microchip

The Microchip Technology DSPIC33EV32GM104-I/P8 is a 16-bit 5V digital signal controller (DSC) with 32KB (11K x 24) ECC Flash, 4KB RAM, a dsPIC DSC core running at up to 70 MIPS, CAN, 6 motor-control PWM channels, 3 on-chip op amps, CTMU, and SENT peripherals, housed in a 48-pin TQFP (7x7 mm) package. According to Microchip product data, the dsPIC33EV family targets harsh-environment designs such as appliances, industrial, and automotive applications. A digital signal controller combines the computational capability of a digital signal processor with the control peripherals and deterministic behavior of a microcontroller. Within the power-management hierarchy, a DSC sits at the top of a chain running from basic MCU to MCU with DSP extensions to full DSC, enabling real-time control loops for motors and power conversion while retaining flash program memory, interrupt-driven peripherals, and in-circuit serial programming (ICSP). Key differentiators include the native 5V operation (4.5V to 5.5V supply), which improves noise immunity in electrically harsh industrial environments versus 3.3V MCUs; ECC Flash for functional-safety (FuSa) designs; and up to 70 MIPS core performance. Mouser listing data highlights CAN, 6 motor-control PWM, 3 op amps, CTMU, and SENT support as headline features, making the device well suited to sensor interfacing and motor control without external analog front-ends. The dsPIC33EV architecture pairs the 16-bit dsPIC CPU with a barrel shifter, DSP multiply-accumulate instructions, and multiple interrupt priorities. The integrated op amps can be used to amplify current-shunt signals for FOC or field-oriented motor control loops, while the CTMU supports capacitive touch or precise time measurement, and SENT simplifies interfacing to automotive sensors. The extended-temperature family member (suffix E) supports higher junction temperatures per AEC-Q100-class requirements, and the family is noted by Microchip for automotive-relevant designs. Typical applications include BLDC and PMSM motor control for appliances and power tools, industrial power supplies and inverters, automotive body and sensor subsystems, and safety-relevant control nodes leveraging ECC Flash. The on-chip CAN peripheral enables networked nodes in vehicles and factory automation. For design, all VDD and VSS pairs must be connected and decoupled with 0.1uF ceramics placed close to the pins, and ICSP programming requires a matched PGECx/PGEDx pair - any pair works, but ICSPCLK and ICSPDAT must use the same pair index. This page synthesizes distributor pricing data, drop-in same-family alternatives, and practical design notes beyond what the manufacturer datasheet alone provides.

RFQ پەیوەندی
DSPIC33EV32GM104T-I/P8 - 16-bit 5V DSC 32KB Flash 70MIPS | Microchip
DSPIC33EV32GM104T-I/P8

DSPIC33EV32GM104T-I/P8 - 16-bit 5V DSC 32KB Flash 70MIPS | Microchip

The Microchip DSPIC33EV32GM104T-I/P8 is a 16-bit 5V digital signal controller (DSC) delivering up to 70 MIPS performance with 32KB (11K x 24) ECC Flash and 4KB RAM, housed in a 48-pin TQFP (7x7 mm) surface-mount package. A digital signal controller combines the compute capability of a digital signal processor with the peripheral integration and control logic of a microcontroller, sitting within the broader hierarchy of DSC -> microcontroller -> embedded processor -> semiconductor. The dsPIC33EV family targets harsh-environment embedded control where a 5V I/O rail directly interfaces with sensors, actuators, and automotive/industrial networks without level shifting. Key features include a 5V-tolerant operating range of 4.5V to 5.5V, an on-chip CAN 2.0B module for industrial and automotive networking, six motor-control PWM channels for inverter and BLDC control, and three integrated operational amplifiers that reduce external BOM in current-sense chains. The CTMU (Charge Time Measurement Unit) supports capacitive touch and precise time measurement, and a SENT peripheral targets automotive sensor interfaces. Technically, the dsPIC33E core uses a modified Harvard architecture with a barrel shifter, DSP multiply-accumulate instructions, and ECC Flash protection that improves functional safety coverage. Dual internal bus architectures allow simultaneous instruction fetch and data access, sustaining deterministic execution for control loops at full 70 MIPS throughput. Operating temperature for the -I suffix spans -40C to +85C. Typical applications include automotive sensor nodes, touch and control units, appliance motor drives, industrial CNC control, and 5V CAN-based field devices. Integrated op amps plus the 12-bit ADC make the part especially well matched to motor-control feedback loops. Design consideration: the controller must be clocked with attention to the 60 MHz internal bus speed versus the 70 MIPS core figure; always decouple all VDD/VDDCORE pins with 0.1 uF ceramics placed within 2 mm of the package. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33EV64GM002-E/SP - 16-bit 5V 70 MIPS DSC | Microchip
DSPIC33EV64GM002-E/SP

DSPIC33EV64GM002-E/SP - 16-bit 5V 70 MIPS DSC | Microchip

The Microchip Technology DSPIC33EV64GM002-E/SP is a 16-bit digital signal controller (DSC) with a 5V-rated dsPIC33E core running at up to 70 MIPS, 64 KB of Flash program memory, 8 KB of SRAM, and an extended temperature range of -40C to +125C, housed in a 28-pin SPDIP (SP) package for through-hole mounting. A digital signal controller combines the computational architecture of a digital signal processor with the peripherals and ease of use of a microcontroller. Within the power-management hierarchy of embedded control, the dsPIC33EV family sits between general-purpose MCUs and dedicated DSPs, offering a DSP engine (17-bit x 17-bit multiplier, 40-bit accumulator, dual operand fetch) alongside robust 5V I/O that survives the electrical noise of industrial and automotive environments. Key features include the 5V operating range that eliminates level-shifting to sensors and power stages, motor-control PWM peripherals with dead-time insertion, SENT and LIN interfaces compliant with automotive networking requirements, on-chip op amps and comparators for current sensing, and watchdog/low-voltage-detect safety features. The -E extended temperature grade supports -40C to +125C operation. Architecturally, the dsPIC33EV64GM002 pairs a 16-bit modified Harvard core with a dedicated DSP multiply-accumulate unit, hardware division, and a flexible clock system supporting internal FRC and external crystal sources. Programming and debugging use the standard ICSP interface via PGEC/PGED pins, compatible with Microchip MPLAB X IDE and ICD/PICkit tooling. Typical applications include appliance motor control (BLDC, PMSM, ACIM), automotive sensor and actuator modules, industrial power supplies and battery chargers, and digital power conversion where 5V noise immunity and DSP-class math are required. Design consideration: the SPDIP package eases prototyping and low-volume assembly, but decouple VDD pins (10 and 19) with 0.1uF ceramics close to the pins, and route PGEC/PGED pairs away from PWM lines to preserve debug reliability. This page synthesizes datasheet-derived specifications, same-family drop-in alternatives, and practical design guidance not consolidated on the manufacturer product page.

RFQ پەیوەندی
DSPIC33EV64GM002-I/SP - 16-bit 70 MIPS 5V DSC | Microchip
DSPIC33EV64GM002-I/SP

DSPIC33EV64GM002-I/SP - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV64GM002-I/SP is a 16-bit digital signal controller (DSC) built on a 5V-rated 70 MIPS dsPIC33EV core, with 64KB (22K x 24) of ECC Flash program memory and 8KB of RAM, housed in a 28-pin SPDIP (PDIP-28) through-hole package. A digital signal controller combines the computational architecture of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, DSCs sit above generic MCUs for math-intensive real-time control loops, and the dsPIC33EV family extends this with a 5V-tolerant operating range that many competing 3.3V controllers cannot match directly. Key features include the 16-bit DSP engine executing up to 70 MIPS, ECC-protected Flash for functional-safety (FuSa) oriented designs, and 5V I/O that simplifies interfacing with industrial sensors and automotive signal levels. The -I temperature suffix specifies industrial-grade operation from -40C to +85C. The part is supported by Microchip MPLAB X IDE and XC16 compiler toolchain plus MPLAB ICD/REAL ICE debug hardware. Technically, the dsPIC33EV64GM002 pairs its modified Harvard 16-bit core with a barrel shifter and DSP multiply-accumulate hardware, supporting deterministic motor-control and power-conversion loops. The integrated ECC Flash reduces soft-error risk, a benefit in noisy 5V environments where the family is specifically positioned for harsh-environment reliability. Typical applications include safety motor control, automotive and appliance control boards, and industrial power supplies and converters, where the combination of 70 MIPS DSP throughput, PWM peripherals, and 5V robustness directly addresses noise, vibration, and voltage-surge stress. For design, note that the 2.54mm-pitch SPDIP package occupies substantial board area versus SMD variants; prototyping on SPDIP then transitioning to an SOIC or SSOP footprint sibling is a common workflow. Remember that ICSP programming requires using PGECx/PGEDx pairs as matched pairs. This page synthesizes distributor availability data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33EV64GM003-E/M5 - 16-bit 5V 60MIPS DSC | Microchip
DSPIC33EV64GM003-E/M5

DSPIC33EV64GM003-E/M5 - 16-bit 5V 60MIPS DSC | Microchip

The Microchip Technology DSPIC33EV64GM003-E/M5 is a 16-bit 5V digital signal controller (DSC) delivering 60 MIPS performance with 64KB ECC Flash (22K x 24) and 8KB RAM, housed in a 36-pin UQFN (5x5 mm) package with exposed pad. It belongs to the automotive-grade, Functional Safety (FuSa) capable dsPIC33EV family from Microchip. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC such as the dsPIC33EV sits at the heart of real-time closed-loop control: it executes mathematical control loops (PI, PID, field-oriented control) while simultaneously managing communication, sensing, and power conversion peripherals on a single chip. Key features of the DSPIC33EV64GM003-E/M5 include a 5V-tolerant operating range suited to harsh electrical environments, six motor-control PWM channels for three-phase inverter drive, three integrated operational amplifiers that reduce external component count in current-sense chains, and a Charge Time Measurement Unit (CTMU) for capacitive touch and precise timing measurements. The 64KB ECC Flash provides single-bit error correction for functional-safety-relevant code storage. Architecturally, the dsPIC DSC core pairs a 16-bit CPU with DSP instructions and a wide 24-bit instruction word, allowing single-cycle MAC operations that accelerate motor control and digital power algorithms. The extended-temperature (-E) variant is qualified for -40C to +125C ambient operation and the family carries AEC-Q100 qualification for automotive deployments. Typical applications include electric power steering and automotive sensor nodes, industrial motor drives and inverters, digital power supplies (PFC, LLC), and appliance control in electrically noisy environments. The integrated op amps directly interface shunt resistors to ADC inputs for phase-current measurement. Design consideration: the 5V rail simplifies gate-drive interfacing to power stages, but designers should confirm ADC reference and analog supply decoupling on the exposed-pad UQFN footprint for noise-sensitive current sampling. This page synthesizes verified distributor data, drop-in alternatives within the dsPIC33EV family, and practical design guidance not found in the manufacturer datasheet alone.

RFQ پەیوەندی
DSPIC33EV64GM003-I/M5 - 16-bit 70 MIPS 5V DSC | Microchip
DSPIC33EV64GM003-I/M5

DSPIC33EV64GM003-I/M5 - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV64GM003-I/M5 is a 16-bit 5V digital signal controller (DSC) delivering 70 MIPS performance from 64KB (22K x 24) ECC Flash and 8KB SRAM, housed in a 36-pin UQFN (5x5 mm) surface-mount package. It operates from a 4.5V to 5.5V supply and integrates motor-control peripherals including 6 motor-control PWM channels, 3 on-chip op amps, and a CTMU (Charge Time Measurement Unit). A digital signal controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs, making the dsPIC33EV family ideal for real-time closed-loop control where fast multiply-accumulate operations and deterministic interrupts are required. Key features include 5V robustness for harsh electrical environments, ECC (error-correcting code) Flash for functional safety (FuSa) designs, and a rich analog integration: 3 op amps that offload external signal-conditioning stages, plus CTMU for capacitive touch and time measurement. Up to 25 general-purpose I/O pins are available in the 36-UQFN footprint. Architecturally, the dsPIC DSC core executes an optimized C compiler-friendly instruction set with DSP engine support (single-cycle MAC, dual operands, modulo and bit-reversed addressing), enabling sensorless FOC motor algorithms, digital power loops, and filtering at high sample rates. Typical applications include safety motor control (BLDC, PMSM, ACIM), appliances, automotive subsystems, and industrial control where 5V noise immunity outperforms 3.3V parts. Design consideration: confirm the -I temperature variant (-40C to +85C) suits your environment; the -E variant extends to +125C in the same footprint. This page synthesizes distributor data, drop-in family alternatives, and design guidance not found in a single manufacturer datasheet.

RFQ پەیوەندی
DSPIC33EV64GM003T-I/M5 - 16-bit 5V DSC 64KB Flash | Microchip
DSPIC33EV64GM003T-I/M5

DSPIC33EV64GM003T-I/M5 - 16-bit 5V DSC 64KB Flash | Microchip

The Microchip DSPIC33EV64GM003T-I/M5 is a 16-bit 5V digital signal controller (DSC) with 64KB ECC Flash, 8KB RAM, a dsPIC33E core running at 60 MHz (70 MIPS class per Microchip family data), 6 motor-control PWM channels, 3 on-chip operational amplifiers, and a CTMU charge-time measurement unit, housed in a 36-pin UQFN (5x5 mm) package with exposed pad. A digital signal controller combines the compute architecture of a microcontroller with DSP-oriented math capability in a single chip. Within the power-management hierarchy of embedded systems, a DSC sits between general-purpose MCUs and dedicated DSPs: it executes C code and real-time control loops while also performing multiply-accumulate operations needed for field-oriented motor control, digital power conversion, and sensor signal processing. The dsPIC33EV family extends this with 5V tolerant operation for harsh industrial and automotive environments. Key differentiating features include ECC-protected Flash for functional-safety oriented designs, three integrated op-amps that offload external analog signal-conditioning circuitry, the CTMU for capacitive touch and time-of-flight measurements, and multiple motor-control PWM modules with complementary outputs and dead-time control. Architecturally, the device uses the dsPIC 16-bit core with DSP instruction extensions, single-cycle MAC, and hardware divide support. The extended-temperature -40C to +125C 'I' grade makes it suitable for under-hood and industrial-floor conditions. Typical applications include brushless DC and PMSM motor drives, digital power supplies (LLC, totem-pole PFC), automotive auxiliary systems, and industrial sensing nodes leveraging the on-chip op-amps and CTMU. Design consideration: take advantage of the internal op-amps to reduce BOM cost, but verify gain-bandwidth against your control-loop requirements; supply decoupling on all VDD/VDDCORE pins is essential for the 60-70 MHz core clock. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
DSPIC33EV64GM004-E/P8 - 16-Bit 5V DSC 60MHz 64KB Flash | Microchip
DSPIC33EV64GM004-E/P8

DSPIC33EV64GM004-E/P8 - 16-Bit 5V DSC 60MHz 64KB Flash | Microchip

The Microchip Technology DSPIC33EV64GM004-E/P8 is a 16-bit 5V digital signal controller (DSC) from the dsPIC33EV family, featuring a 60 MHz core, 64KB (22K x 24) ECC Flash program memory, and 4KB of RAM, housed in a 48-pin TQFP (7x7 mm) package with extended temperature range (-40C to +125C). A digital signal controller combines the computational architecture of a digital signal processor with the peripheral integration and control-oriented design of a microcontroller. In the broader system hierarchy, the dsPIC33EV sits within the power-management and motor-control device class: DSC -> 16-bit microcontroller -> embedded processor -> semiconductor. Microchip positions the dsPIC33EV family specifically for harsh electrical environments where a native 5V supply eliminates external level shifting. Key features of this device include 64KB of self-programmable ECC Flash, which detects and corrects single-bit memory errors for functional-safety (FuSa) designs; six motor-control PWM channels for three-phase inverter drive; three integrated operational amplifiers that reduce external analog component count; a Charge Time Measurement Unit (CTMU) for capacitive touch and time-based measurements; and hardware support for the SENT (SAE J2716) automotive sensor interface. DigiKey lists this part as a dsPIC 33EV Functional Safety (FuSa) Microcontroller IC. Architecturally, the dsPIC33E core executes an enhanced 16-bit instruction set with DSP multiply-accumulate instructions at up to 60 MIPS equivalent throughput, supported by DMA for peripheral-to-memory data transfer without CPU intervention. The extended-temperature (E) suffix confirms operation across -40C to +125C, and the 4.5V to 5.5V operating range suits industrial 5V logic and automotive 5V regulated rails. Typical applications include BLDC and PMSM motor control in appliances and industrial drives, automotive sensor and actuator nodes using SENT, switched-mode power supplies, and capacitive-touch control panels. The on-chip op amps pair directly with the motor-control PWM and ADC peripherals for current-sense feedback loops. When designing with this device, provide adequate decoupling on the 5V rail and use the ECC Flash feature combined with clock monitoring for any safety-critical control loop. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design guidance not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33EV64GM004-I/P8 - 16-bit 5V DSC, 64KB Flash | Microchip
DSPIC33EV64GM004-I/P8

DSPIC33EV64GM004-I/P8 - 16-bit 5V DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33EV64GM004-I/P8 is a 16-bit 5V digital signal controller (DSC) with 64KB of ECC Flash memory, 4KB of RAM, and a dsPIC33EV core running at up to 70 MIPS, housed in a 48-pin TQFP (7x7 mm) package. A digital signal controller combines the compute characteristics of a digital signal processor (DSP) with the peripheral integration and control-oriented architecture of a microcontroller (MCU). In the system hierarchy, the dsPIC33EV sits within the broader 16-bit MCU and DSC category of embedded processors, targeting real-time control loops where math-intensive algorithms (PID, transforms, filtering) must execute deterministically. The 5V-native core distinguishes it from most 3.3V MCUs, allowing direct interfacing with automotive and industrial sensors and actuators without level shifting. Key features include 64KB (22K x 24) of ECC-protected Flash program memory for functional-safety designs, a 16-bit pipeline core at up to 70 MIPS, six motor-control PWM channels for three-phase inverter drives, and three on-chip operational amplifiers that condition current-shunt signals without external op-amps. The CTMU (Charge Time Measurement Unit) supports capacitive touch and precise time measurement, while a SENT peripheral complies with the automotive SAE J2716 sensor interface. Architecturally, the dsPIC33EV GM family implements a modified Harvard bus with DSP multiply-accumulate (MAC) instructions, two 40-bit accumulators, and hardware division support. ECC Flash mitigates single-bit faults from noise and radiation in harsh 5V electrical environments, which is why the family is positioned by Microchip for functional-safety (FuSa) motor-control and automotive sensing units. Typical applications include automotive sensors and touch-control units, appliance motor drives (fans, pumps, compressors), and industrial control operating in noisy, high-vibration environments where 5V noise immunity is decisive. A key design consideration: all VDD and VSS pins must be connected, and ICSP programming must use a matched PGECx/PGEDx pin pair (for example, PGEC2 with PGED2); mismatched pairs are a common bring-up failure. At 5V operation, derate the maximum clock speed per the datasheet voltage-frequency curve. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33EV64GM004T-I/P8 - 16-bit 70MIPS 64KB DSC | Microchip
DSPIC33EV64GM004T-I/P8

DSPIC33EV64GM004T-I/P8 - 16-bit 70MIPS 64KB DSC | Microchip

The Microchip Technology DSPIC33EV64GM004T-I/P8 is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, built on a 5V-tolerant dsPIC33E core delivering up to 70 MIPS, with 64KB of ECC-protected Flash (22K x 24) and 4KB of RAM, housed in a 48-pin TQFP (7x7 mm, P8) package. A digital signal controller combines the compute architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). In the power-management hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes deterministic control loops (PID, field-oriented control) while handling communication and housekeeping tasks on one chip, making it the standard choice for digitally controlled power conversion and motor drive. Key features include a 16-bit modified Harvard architecture with DSP engine, six motor-control PWM channels, three on-chip operational amplifiers, a charge time measurement unit (CTMU) for capacitive touch and time-domain measurements, and SENT peripheral support for automotive sensor interfaces. ECC Flash protects program memory against single-bit faults, supporting functional-safety (FuSa) oriented designs. The 5V operating range is a decisive technical advantage: it eliminates level shifting against 5V sensors and automotive transistor-transistor logic, and improves noise margins in electrically harsh environments with vibration, load-dump transients, and conducted interference. Operating temperature spans -40C to +85C for the I-grade suffix. Typical applications include BLDC/PMSM and ACIM motor control in appliances, switch-mode power supplies and power-factor-correction stages, automotive body and sensor modules using SENT, and industrial control panels. Design consideration: budget the 4KB RAM carefully - DMA buffers, PWM trap states, and DSP accumulations consume it quickly; the 128KB and 256KB pin-compatible family members offer RAM headroom without a footprint change. This page synthesizes distributor data, pin-compatible drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33EV64GM006-I/MR - 16-Bit 70 MIPS 5V DSC | Microchip
DSPIC33EV64GM006-I/MR

DSPIC33EV64GM006-I/MR - 16-Bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV64GM006-I/MR is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering 70 MIPS performance from a 5V-tolerant dsPIC DSC core with 64KB (22K x 24) of ECC Flash program memory and 8KB of RAM, housed in a 64-pin VQFN (9x9 mm) package. A digital signal controller combines the computational horsepower of a DSP with the peripheral integration and control peripherals of a microcontroller. Within the power-management hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs, making it the preferred choice for closed-loop motor control, digital power conversion, and safety-oriented sensing systems that need both math throughput and rugged I/O. Key features of this part include the 70 MIPS modified Harvard architecture core with DSP multiply-accumulate instructions, ECC-protected Flash for functional-safety (FuSa) designs, advanced motor-control PWM peripherals, a SENT peripheral for automotive sensor interfaces, and integrated analog features including on-chip op amps. These capabilities reduce external component count while improving noise immunity in electrically harsh environments. Technically, the dsPIC33EV family operates from a single 5V supply, which is a major advantage over 3.3V-only controllers in automotive and industrial systems where sensors and actuators still run on 5V rails. The ECC Flash detects and corrects single-bit memory errors, supporting safety-critical applications, and the extended peripheral set (PWM, SENT, comparators, op amps) targets SIL-rated and ISO-oriented designs. Typical applications include BLDC and PMSM motor control in appliances, automotive sensor and touch control units, industrial power supplies, and harsh-environment embedded control where vibration, noise, and wide temperature ranges are present. A key design consideration: the 5V core simplifies level shifting but requires careful decoupling and PCB layout of the VQFN exposed pad for thermal and ground integrity. This page synthesizes verified distributor pricing, drop-in same-family alternatives, and practical design guidance not found in the manufacturer datasheet alone.

RFQ پەیوەندی
DSPIC33EV64GM006T-I/MR - 16-bit 70 MIPS 5V DSC 64KB Flash | Microchip
DSPIC33EV64GM006T-I/MR

DSPIC33EV64GM006T-I/MR - 16-bit 70 MIPS 5V DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EV64GM006T-I/MR is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering up to 70 MIPS from a 5V-tolerant dsPIC DSC core, with 64KB (22K x 24) of ECC Flash program memory, 8KB of RAM, and a 64-pin VQFN (9x9 mm) package with exposed pad. A digital signal controller combines the compute architecture of a microcontroller with DSP-style math acceleration in a single chip. In the product hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes real-time control loops (PI, FOC, digital filters) with single-cycle MAC instructions while retaining peripherals, interrupts, and I/O familiar to embedded firmware teams. The dsPIC33EV family extends this concept to 5V operation, directly interfacing with industrial and automotive sensors without level shifting. Key features include a 16-bit modified Harvard core running at up to 70 MIPS, 64KB of ECC-protected Flash for functional-safety designs, and an operating voltage range centered on 5V for harsh, noisy environments. The ECC Flash protects program memory against single-bit faults, which supports reliability targets in motor control and power conversion products. Technically, the device integrates DMA channels, multiple timers, and a 10-bit ADC with many input channels for simultaneous sampling of phase currents and bus voltages in motor drives. DSP engine features (barrel shifter, single-cycle MAC, modulo and bit-reversed addressing) enable efficient filter and transform execution without an external DSP. Typical applications include brushless DC and PMSM motor control, switch-mode power supplies and digital power conversion, and automotive/industrial sensor interfaces operating in high-vibration, high-noise conditions. Design consideration: exploit the exposed thermal pad of the VQFN-64 for ground plane heat spreading, and use the ECC Flash plus watchdog features early in your safety analysis rather than retrofitting them. This page synthesizes distributor pricing, drop-in same-family alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33EV64GM102-E/SO - 16-bit 60 MIPS 5V DSC | Microchip
DSPIC33EV64GM102-E/SO

DSPIC33EV64GM102-E/SO - 16-bit 60 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV64GM102-E/SO is a 16-bit 5V digital signal controller (DSC) delivering up to 60 MIPS (70 MIPS class core) from 64KB (22K x 24) ECC Flash and 8KB RAM, housed in a 28-pin SOIC (7.50mm width) surface-mount package rated for -40C to +125C operation. A digital signal controller combines the computational architecture of a digital signal processor - hardware multiply-accumulate, barrel shifter, DSP instruction set - with the peripheral integration and deterministic control flow of a microcontroller. Within the power-management hierarchy, the dsPIC33EV family sits in the 16-bit MCU/DSC segment of the broader microcontroller and semiconductor taxonomy, targeting real-time embedded control rather than general-purpose computing. Key features include a 16-bit dsPIC33E core with DSP engine, 64KB of ECC-protected Flash for functional-safety (FuSa) oriented designs, on-chip CAN 2.0B for automotive and industrial networks, six motor-control PWM channels for three-phase inverter drive, three integrated operational amplifiers that offload external analog front-end stages, a Charge Time Measurement Unit (CTMU) for capacitive touch and time-of-flight measurement, and a SENT peripheral for automotive sensor interfaces. The 5V supply rating eliminates level shifting in noisy 12V/24V industrial and automotive environments. The enhanced architecture provides multiple internal buses for simultaneous instruction fetch and data access, supporting single-cycle MAC operations critical for digital filtering, sensor fusion, and field-oriented motor control. Deep sleep and low-power modes support battery-backed nodes. Typical applications include brushless DC and PMSM motor drives, automotive body and powertrain adjunct modules using CAN and SENT, and harsh-environment appliance control where 5V noise immunity and extended temperature range are required. When designing, remember the 64KB Flash limit versus 128KB/256KB family members, and confirm op-amp configuration registers are initialized before enabling analog peripherals. This page synthesizes verified distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33EV64GM102-I/MM - 16-Bit 70 MIPS 5V DSC | Microchip
DSPIC33EV64GM102-I/MM

DSPIC33EV64GM102-I/MM - 16-Bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV64GM102-I/MM is a 16-bit 5V digital signal controller (DSC) delivering up to 70 MIPS performance, 64KB of ECC Flash program memory (22K x 24), and 8KB of RAM, housed in a 28-pin QFN-S (6x6 mm) surface-mount package. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC sits between general-purpose MCUs and dedicated DSP chips: it executes digital control loops, power-conversion algorithms, and motor-control mathematics while simultaneously managing communication, sensing, and supervisory tasks on a single chip. The dsPIC33EV family is Microchip's 5V-tolerant entry in this category, designed for harsh electrical environments. Key features of the DSPIC33EV64GM102 include error-correcting code (ECC) on Flash for functional-safety designs, a 16-bit DSP core with barrel shifter, on-chip operational amplifiers, high-resolution PWM modules, and a SENT peripheral compliant with automotive sensor networking. The 5V operating range eliminates level shifting when interfacing with automotive sensors and industrial 5V logic, improving noise immunity in electrically noisy environments. Architecturally, the device belongs to the dsPIC33EV family (part of the dsPIC33 line within Microchip's 16-bit portfolio). The core executes DSP instructions such as multiply-accumulate (MAC) at 70 MIPS, supporting field-oriented control (FOC) of motors, power-factor correction, and digital power conversion. On-chip features include multiple UART, SPI, and I2C ports, a 12-bit ADC pipeline for current and voltage sampling, and comparators for fast over-current protection. Typical applications include brushless DC and PMSM motor control in appliances, automotive body and powertrain subsystems using SENT, switched-mode power supplies, and industrial automation nodes where 5V noise immunity matters. A key design consideration is the VCAP pin: a low-ESR capacitor must be connected to stabilize the internal 2.5V core regulator, and proper decoupling on every VDD/VSS pair is essential for EMC compliance in automotive designs. This page synthesizes distributor availability, drop-in same-package alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33EV64GM102-I/SO - 16-bit 70 MIPS 5V DSC | Microchip
DSPIC33EV64GM102-I/SO

DSPIC33EV64GM102-I/SO - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV64GM102-I/SO is a 16-bit 5V digital signal controller (DSC) delivering up to 70 MIPS from its dsPIC33E core, with 64KB (22K x 24) of ECC Flash program memory and 8KB of RAM, packaged in a 28-pin wide SOIC for industrial temperature operation (-40C to +85C). A digital signal controller combines the peripheral set and ease of use of a microcontroller with the computational throughput of a DSP. Within the power-management hierarchy of embedded control, a DSC sits between general-purpose MCUs and dedicated DSPs, offering hardware multiply-accumulate, barrel shifting, and DSP instruction support while retaining Flash self-programming, interrupts, and rich serial peripherals. The dsPIC33EV family from Microchip extends this concept to a native 5V operating range, simplifying designs that must interface directly with automotive sensors and industrial 5V logic. Key features of the DSPIC33EV64GM102 include 70 MIPS execution at 5V, error-correcting code (ECC) Flash for functional-safety (FuSa) oriented designs, a hardware barrel shifter and DSP engine for control-loop mathematics, and low-power management modes for power-sensitive systems. The wide 5V supply tolerance makes it tolerant of harsh electrical environments such as load dump conditions in vehicles and noisy industrial power rails. Architecturally, the device uses an enhanced 16-bit modified Harvard core with multiple internal bus architectures for efficient data handling, single-cycle MAC, and hardware divide support. The ECC Flash continuously detects and corrects single-bit memory errors, an important feature for IEC functional-safety development paths. Typical applications include appliance motor control (BLDC/PMSM and ACIM), industrial power supplies and digital power conversion, automotive body and convenience modules, battery charging, and sensor signal conditioning where direct 5V interfacing removes level-shifting circuitry. A key design consideration: at 70 MIPS the core frequency is up to 70 MHz (via internal PLL from an external source), so decouple VDD/VDDCORE per the family datasheet and verify Flash wait-state settings for your supply voltage. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33EV64GM103-I/M5 - 70MIPS 5V DSC, CAN | Microchip
DSPIC33EV64GM103-I/M5

DSPIC33EV64GM103-I/M5 - 70MIPS 5V DSC, CAN | Microchip

The Microchip Technology DSPIC33EV64GM103-I/M5 is a 16-bit digital signal controller (DSC) with a 5V-tolerant dsPIC33E core running at 70 MIPS (60 MHz instruction cycle clock), 64 KB (22K x 24) of ECC Flash program memory, 8 KB of SRAM, an integrated CAN module, 6-channel motor-control PWM, 3 on-chip operational amplifiers, a CTMU charge-time measurement unit, and SENT peripheral support, housed in a 36-pin UQFN (5x5 mm) exposed-pad package. A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and ease of use of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the dsPIC33EV family sits between general-purpose 16-bit MCUs and full DSPs, targeting deterministic real-time control loops such as field-oriented motor control and switch-mode power conversion. Key features include native 5V operation (4.5V to 5.5V supply), which removes external level-shifting in harsh industrial and automotive electrical environments, single-cycle MAC and DSP instructions for fast control mathematics, ECC-protected Flash for functional safety (FuSa) designs, and Peripheral Pin Select (PPS) for flexible pin mapping. The dsPIC33E architecture implements a modified Harvard pipeline with 24-bit instruction words, hardware divide support, and a DMA controller that offloads CAN, ADC, and UART data movement from the CPU core. The three integrated op-amps can be cascaded with the internal 10/12-bit ADC to build current-sense amplification directly on-chip, reducing bill-of-material cost in motor drives. Typical applications include BLDC and PMSM motor control, CAN-based automotive body and powertrain nodes, sensor conditioning using CTMU, and SENT-interface automotive sensors. Design consideration: the -I (industrial) temperature suffix covers -40C to +85C; the -E suffix extends to +125C if higher ambient is required. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33EV64GM103T-I/M5 - 16-bit 70 MIPS 5V DSC | Microchip
DSPIC33EV64GM103T-I/M5

DSPIC33EV64GM103T-I/M5 - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV64GM103T-I/M5 is a 16-bit dsPIC33EV digital signal controller (DSC) delivering up to 70 MIPS at 5V operation, with 64KB (22K x 24) of ECC-protected Flash program memory and 8KB of RAM, housed in a 36-pin UQFN (5x5 mm) exposed-pad package. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and deterministic control of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, making the dsPIC33E family a common choice for motor control, digital power conversion, and sensing applications that require multiply-accumulate performance together with hard real-time peripherals. Key differentiating features of this part include 5V-tolerant operation across a 4.5V to 5.5V supply range, which suits harsh industrial and automotive electrical environments, an on-chip CAN module for vehicle and factory networks, six motor-control PWM channels for inverter and motor drive topologies, and an integrated CTMU (Charge Time Measurement Unit) for capacitive touch and time-based sensing. The 64KB Flash includes ECC (error correction code) protection, supporting functional-safety (FuSa) oriented designs. On the analog side, the device integrates three operational amplifiers that can buffer current-shunt signals ahead of the ADC, reducing external component count in motor-control and power-supply feedback loops. The SENT peripheral supports the single-edge nibble transmission protocol widely used in automotive sensor interfaces. The 70 MIPS core executes the DSP-class instruction set with hardware MAC, enabling filtering and control-loop mathematics at fixed deterministic rates. Typical applications include BLDC and PMSM motor control in appliances, automotive body and powertrain ancillary modules, digital power supplies, industrial sensing nodes, and CAN-networked actuators. The 5V rail tolerance eliminates a level-shifting supply stage that 3.3V MCUs would otherwise require. A key design consideration is thermal management: the exposed pad of the UQFN-36 package must be soldered to a ground pour with adequate via stitching to dissipate heat at full 70 MIPS operation. Flash ECC and the 4.5V to 5.5V operating window should both be verified against the end application's functional-safety targets. This page synthesizes distributor inventory signals, drop-in family alternatives, and practical design notes that are not consolidated in the manufacturer datasheet. Pricing is not published in the verified data as of 2026-09-26; request a quote for current volume pricing.

RFQ پەیوەندی
DSPIC33EV64GM104-I/ML - 5V 70 MIPS 16-bit DSC 64KB Flash | Microchip
DSPIC33EV64GM104-I/ML

DSPIC33EV64GM104-I/ML - 5V 70 MIPS 16-bit DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EV64GM104-I/ML is a 16-bit 5V digital signal controller (DSC) delivering up to 70 MIPS performance with 64 KB of ECC Flash program memory and 8 KB of RAM, housed in a 44-pin QFN (8x8 mm) package with exposed pad. A digital signal controller combines the computational capability of a microcontroller with DSP-oriented features such as hardware multiply-accumulate, making the dsPIC33EV family a bridge between general-purpose MCUs and dedicated DSPs. Within the power-management hierarchy of embedded control, a DSC sits above basic MCUs and is optimized for closed-loop control loops, digital power conversion, and motor control in electrically harsh environments. Key features include a 5V-tolerant operating supply that eliminates level-shifting in industrial and automotive 5V systems, up to 24 channels of 10-bit ADC, four DMA channels, CAN 2.0B and SENT interfaces for automotive networking, and on-chip op amps plus high-resolution PWM outputs targeted at motor control. The integrated ECC Flash provides single-bit error correction for improved functional safety in noisy environments. Architecturally, the dsPIC33EV core runs a modified Harvard pipeline at up to 70 MIPS, with DSP instruction extensions (MAC, modulo addressing, bit-reversed addressing) that accelerate digital filtering and control algorithms. The wide 3.0V to 5.5V supply range and industrial-grade design target harsh conditions with noise and vibration. Typical applications include BLDC and PMSM motor control, automotive sensors and touch/control units, appliance control boards, industrial power supplies, and CAN-networked body modules. When designing with this device, plan the VDD decoupling with low-ESR ceramics and account for the exposed thermal pad on the QFN bottom when creating the PCB land pattern. This page synthesizes distributor pricing, drop-in same-family alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33EV64GM104T-I/PT - 16-bit 70 MIPS 5V DSC 64KB | Microchip
DSPIC33EV64GM104T-I/PT

DSPIC33EV64GM104T-I/PT - 16-bit 70 MIPS 5V DSC 64KB | Microchip

The Microchip Technology DSPIC33EV64GM104T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering up to 70 MIPS performance from a 5V-tolerant dsPIC33 core, with 64KB (22K x 24) ECC Flash program memory, 8KB RAM, and a 44-pin TQFP (10x10 mm) surface-mount package. A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, making the dsPIC33EV family well suited to closed-loop control loops, motor control, and power conversion where both math throughput and rugged I/O are required. Key features of this part include an operating voltage range of 4.5V to 5.5V (5V-class operation in harsh environments), a CAN 2.0B bus interface with up to 8 Mbit/s operation, six motor-control PWM channels with fault protection, three on-chip op amps, a charge time measurement unit (CTMU), and SENT peripheral support for automotive sensor interfaces. The ECC Flash provides functional safety (FuSa) capability by detecting and correcting single-bit memory errors. Architecturally, the dsPIC33EV64GM104 integrates a 16-bit modified Harvard core with DSP engine, barrel shifter, four DMA channels, and multiple interrupt vectors, allowing deterministic real-time response. Peripheral Pin Select (PPS) lets engineers remap digital peripherals onto RPn pins, easing PCB layout and reducing board rework during development. Typical applications include brushless DC and PMSM motor drives, industrial power supplies, automotive body and powertrain subsystems using CAN and SENT, appliances requiring robust 5V I/O, and digital lighting or HVAC control. A key design consideration is thermal management: the 44-TQFP exposed-lead package on a standard 4-layer board typically supports the full industrial temperature range of -40C to +85C, but high-frequency operation with heavily loaded I/O banks should be verified with junction temperature estimation. This page synthesizes distributor availability data, drop-in alternatives, pin-compatibility guidance, and practical design notes not found in a single manufacturer datasheet, giving engineers and buyers one consolidated reference.

RFQ پەیوەندی