بەرهەمەکان (1,300+)

DSPIC33FJ64GP710-I/PT - 16-bit DSC 40 MIPS 64KB Flash | Microchip
DSPIC33FJ64GP710-I/PT

DSPIC33FJ64GP710-I/PT - 16-bit DSC 40 MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GP710-I/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPS at 40 MHz with 64KB of Flash program memory, housed in a 100-pin TQFP (12x12 mm) package. A digital signal controller combines the compute architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC sits above general-purpose MCUs for math-intensive tasks: its 16-bit modified Harvard architecture, DSP engine, and rich analog/timer peripherals make it the bridge between a PIC-class MCU and a dedicated DSP. The dsPIC33F family shares seamless migration options to and from PIC24 MCUs and dsPIC30F DSCs in similar packages. Key features of this device include the 64KB (64K x 8) self-programmable Flash, 40 MIPS maximum throughput, an industrial-grade operating range implied by the -I temperature suffix, and a 100-terminal TQFP footprint with 0.5 mm pitch that suits high-pin-count motor-control and signal-processing boards. The GP (general purpose) variant carries a broad peripheral portfolio including UART, SPI, I2C, and ADC resources typical of the dsPIC33F General Purpose family. Architecturally, the dsPIC33F core executes most instructions in a single cycle and includes hardware DSP multiply-accumulate support, enabling real-time control loops and filtering that would overload a conventional 8-bit or basic 16-bit MCU. Operation from a nominal 3.3 V supply (3.0 V to 3.6 V) simplifies integration with modern logic rails. Typical applications include digital power supplies, motor control (BLDC/PMSM/ACIM), industrial automation, sensor signal conditioning, and audio or communications processing where the GP peripherals and DSP instructions are both required. For design, allow brown-out and power-supply sequencing margin at 3.3 V operation, and verify Flash endurance and temperature derating against the official Microchip datasheet before final qualification. This page synthesizes distributor pricing context, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
DSPIC33FJ64GP802-E/MM - 16-bit 40MIPS DSC 64KB Flash | Microchip
DSPIC33FJ64GP802-E/MM

DSPIC33FJ64GP802-E/MM - 16-bit 40MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GP802-E/MM is a 16-bit digital signal controller (DSC) delivering up to 40 MIPS of performance with 64 KB of Flash program memory and 16 KB of SRAM, housed in a 28-pin QFN (6x6 mm, exposed pad) package with extended temperature operation (-40C to +125C). A digital signal controller combines the deterministic control flow of a 16-bit microcontroller with the DSP engine of a digital signal processor in a single silicon device. In the embedded systems hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs, making it the natural choice for closed-loop control applications that need both C-friendly code density and single-cycle multiply-accumulate throughput. Key features include 16384 words of Flash program memory, 8 DMA channels that move data without CPU intervention, 7 timers, 3 serial I/O interfaces (UART, SPI, I2C), and software-remappable pin functions that simplify PCB routing. The extended-temperature E suffix and AEC-Q100 qualification make this specific ordering code suitable for automotive and harsh industrial environments. Architecturally, the dsPIC33FJ core uses CMOS process technology with a 16-bit modified Harvard bus, a hardware 17-bit x 17-bit multiplier, a barrel shifter, and DSP accumulate instructions executing in a single cycle at 40 MIPS from a 3.0V to 3.6V supply. An integrated 10-bit ADC with hardware conversion triggering feeds the DMA controller for low-jitter sensor sampling, while 5V-tolerant digital pins with per-pin overvoltage clamp current of 5 mA ease interfacing with legacy 5V systems. Typical applications include BLDC/PMSM motor control where fast ADC-to-PWM latency matters, digital power supplies and PFC stages, automotive sensor nodes, and audio signal processing. The 28-pin footprint with 21 I/O ports gives enough peripheral density for compact control boards. A key design consideration is supply integrity: the 3.3V rail must stay within 3.0V to 3.6V, and the internal regulator requires proper decoupling per the Microchip datasheet (DS70292G); the exposed pad should be soldered to a ground pour for thermal and EMI performance. This page synthesizes distributor inventory data, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33FJ64GP802-E/SO - 16-bit DSC, 64KB Flash, 40 MIPS | Microchip
DSPIC33FJ64GP802-E/SO

DSPIC33FJ64GP802-E/SO - 16-bit DSC, 64KB Flash, 40 MIPS | Microchip

The Microchip Technology DSPIC33FJ64GP802-E/SO is a 16-bit digital signal controller (DSC) combining a dsPIC33F RISC core running at up to 40 MIPS with 64 KB of Flash program memory, 16 KB of SRAM, and an extended-temperature -40C to +125C rating in a 28-pin SOIC package. A digital signal controller is a hybrid class of semiconductor that merges the peripheral set and ease-of-use of a microcontroller (MCU) with the computational hardware of a digital signal processor (DSP). Within the power-management and embedded-processing hierarchy, the dsPIC33FJ family sits under the 16-bit MCU/DSC taxonomy, sitting above 8-bit PIC MCUs in math throughput while remaining simpler than 32-bit application processors. DSCs are the workhorses of high-speed precision digital control loops. Key features include hardware multiply, divide, and barrel shifter units for single-cycle DSP operations, 8-channel direct memory access (DMA) for moving ADC and serial data without CPU intervention, a CAN 2.0B controller for industrial and automotive networking, and multiple serial ports (UART, SPI, I2C) managed through Microchip's Peripheral Pin Select (PPS) scheme. The core executes two instructions per clock cycle, delivering the 40 MIPS rating from an internal PLL. Architecturally, the dsPIC33F uses a modified Harvard bus structure with separate program and data paths, a 16-bit ALU plus 40-bit accumulator support for DSP multiply-accumulate (MAC) instructions, and a vectored interrupt controller with deterministic latency. Flash program memory is self-programmable for field firmware updates, and the device operates from a single 3.3V supply with an internal oscillator and fail-safe clock monitoring. Typical applications include motor control (BLDC, PMSM, stepper), digital power supplies and power factor correction, industrial automation and CAN networking nodes, and signal-conditioning or digital-filter front ends in measurement equipment. The E-grade temperature rating and AEC-Q100 qualification make it suitable for automotive under-hood and harsh industrial environments. Design consideration: the dsPIC33FJ family requires careful power-up sequencing and proper decoupling (0.1uF on every VDD/VSS pair); the Peripheral Pin Select must be locked after configuration to prevent runtime remapping of critical pins. This page synthesizes distributor pricing, drop-in alternatives, compliance data, and practical design notes not consolidated in the manufacturer datasheet (436-page family datasheet, 6 MB).

RFQ پەیوەندی
DSPIC33FJ64GP802-I/SO - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip
DSPIC33FJ64GP802-I/SO

DSPIC33FJ64GP802-I/SO - 16-bit DSC, 40 MIPS, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GP802-I/SO is a 16-bit digital signal controller (DSC) delivering up to 40 MIPS from its 40 MHz CMOS core, with 64 KB of Flash program memory and 16 KB of SRAM, housed in a 28-pin SOIC (SO) package rated for -40C to +85C operation. A digital signal controller combines the computational architecture of a digital signal processor - including a hardware multiplier, barrel shifter, and DSP instruction set - with the peripheral integration and ease of use of a microcontroller. Within the power management hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP, making the dsPIC33FJ family a common choice for closed-loop digital power, motor control, and sensor signal processing where both fast math and rich peripherals are needed. Key features of the DSPIC33FJ64GP802 include 8 DMA channels that offload data movement from the CPU, 7 timers for capture/compare and PWM generation, and 3 serial I/O ports (UART, SPI, and I2C) for communication. The device integrates advanced analog, including a high-speed 10-bit ADC, enabling direct sensor interfacing for control loops. Technically, the dsPIC33FJ core executes most instructions in a single cycle with a modified Harvard bus architecture and supports fractional and saturated DSP arithmetic. Peripherals such as the Output Compare modules and Input Capture channels are remappable across RP pins, giving PCB layout flexibility in the 28-pin footprint. The operating supply range is 3.0 V to 3.6 V, compatible with standard 3.3 V logic systems. Typical applications include digital power supplies (SMPS and power factor correction), brushless DC and PMSM motor control, and audio or sensor signal conditioning, where the 40 MIPS throughput and hardware DSP multiply-accumulate operations maintain loop bandwidth under load. Design consideration: the 28-SOIC package requires careful decoupling (100 nF ceramic at VDD/AVDD) and, because VDD and core supply share the 3.3 V rail in this family, verify Brown-out and POR settings for reliable startup. This page synthesizes distributor pricing, drop-in same-family alternatives, pinout data, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33FJ64GP802T-I/MM - 16-bit DSC 40MIPS 64KB Flash | Microchip
DSPIC33FJ64GP802T-I/MM

DSPIC33FJ64GP802T-I/MM - 16-bit DSC 40MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GP802T-I/MM is a 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS execution speed with 64 KB (64K x 8) of FLASH program memory, 16 KB (16K x 8) of SRAM, and 21 general-purpose I/O lines, housed in a 28-pin QFN-S surface-mount package measuring 6 mm x 6 mm. A Digital Signal Controller combines the computational architecture of a digital signal processor (DSP) - including a hardware barrel shifter, DSP multiply-accumulate instructions, and fast interrupt handling - with the peripheral integration and ease of use of a general-purpose microcontroller (MCU). Within Microchip's hierarchy, the dsPIC33F family sits between the PIC24 16-bit MCU family and the dsPIC33E high-performance DSC family, making it a popular choice for mixed control-and-signal-processing workloads. Key features of this device include a 16-bit modified Harvard architecture core operating at up to 40 MIPS from a 3.0 V to 3.6 V supply, 64 KB of self-programmable FLASH for field upgrades, and an advanced analog subsystem intended for precision sensing. The GP (General Purpose) peripheral variant adds audio-grade connectivity, making it suitable for signal-chain applications that standard MCUs struggle to serve in a single chip. Technically, the dsPIC33FJ64GP802 executes two-instruction-fetch pipelined code efficiently, includes a hardware DSP engine supporting MAC-class operations for digital filter algorithms and high-speed precision digital control loops, and supports low-power modes plus boundary scan capabilities as described in distributor device summaries. According to Microchip's family documentation, these dsPIC33F devices are designed to execute digital filter algorithms and high-speed control loops under pressure - the defining use case for the family. Typical applications include digital power supplies and lighting control, motor control, audio signal processing, and industrial sensors where the combination of DSP math, general-purpose I/O, and on-chip analog reduces system BOM count. The 6x6 mm QFN-S package supports compact surface-mount designs in industrial and portable equipment. A key design consideration: the device operates only from a 3.0 V to 3.6 V supply, so 5 V systems require level shifting or a local 3.3 V regulator; plan decoupling on both VDD pins and reference the analog front end carefully to preserve signal integrity. This page synthesizes verified distributor pricing, drop-in family alternatives, and practical design guidance not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33FJ64GP804-E/PT - 16-bit DSC 64KB Flash 40MIPS | Microchip
DSPIC33FJ64GP804-E/PT

DSPIC33FJ64GP804-E/PT - 16-bit DSC 64KB Flash 40MIPS | Microchip

The Microchip DSPIC33FJ64GP804-E/PT is a 16-bit digital signal controller (DSC) combining a dsPIC33F RISC core running up to 40 MIPS with 64KB of Flash program memory and 16KB of SRAM, housed in a 44-pin TQFP (10x10 mm) package with an extended -40C to +125C operating temperature range. A digital signal controller is a hybrid device class that merges the deterministic interrupt latency and peripheral set of a microcontroller (MCU) with the multiply-accumulate (MAC) DSP engine of a digital signal processor. Within the power-management hierarchy of embedded systems, the DSC sits above a general-purpose MCU and below a dedicated DSP, making the dsPIC33F family a common choice for embedded control loops that also need math-heavy signal processing. Key features include 8 DMA channels that offload data movement from the CPU, 3 external interrupt sources, and 3 serial communication ports supporting UART, SPI, and I2C peripherals. The device operates from a single 3.0V to 3.6V supply with a nominal 3.3V rail, and integrated audio/general-purpose peripherals make it suited to mixed analog-digital nodes. Architecturally, the dsPIC33F core uses a modified Harvard pipeline with DSP instruction support (MAC, DSP multiply, barrel shifter) executed in a single cycle at 40 MIPS. Flash program memory is 24-bit instruction-word wide, and the 16KB SRAM supports both data and DSP X/Y memory partitioning. CMOS process technology keeps active current low for industrial duty cycles. Typical applications include industrial motor control (BLDC/ACIM with sensor feedback), digital power supplies and power-factor-correction stages, and audio/sensor signal processing where a 16-bit DSC with an on-chip ADC is preferred over a discrete MCU-plus-DSP pairing. The extended temperature variant also fits automotive auxiliary and outdoor industrial nodes. When designing with this device, budget the 3.3V rail decoupling per Microchip layout guidance and confirm the ADC module variant (10-bit vs 12-bit) for your part number before finalizing analog channel counts. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33FJ64GP804-I/PT - 16-bit DSC, 64KB Flash, 40 MIPS | Microchip
DSPIC33FJ64GP804-I/PT

DSPIC33FJ64GP804-I/PT - 16-bit DSC, 64KB Flash, 40 MIPS | Microchip

The Microchip Technology DSPIC33FJ64GP804-I/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance with 64 KB of Flash program memory and 16 KB of SRAM, housed in a 44-pin TQFP (10x10 mm, 0.8 mm pitch) surface-mount package. It combines MCU control with DSP capability in a single core. A digital signal controller is a hybrid of a microcontroller and a digital signal processor: it retains the peripherals, interrupt structure and ease of use of an MCU while adding DSP-style multiply-accumulate (MAC) instructions and addressing modes. In the power-management hierarchy, the dsPIC33FJ family sits between general-purpose 16-bit MCUs (PIC24) and dedicated DSPs, making it the default choice for embedded control loops that also need real-time math. Key features include 8-channel DMA for moving data without CPU intervention, 7 timers, and 3 serial communication ports (UART, SPI, I2C). The GP (General Purpose) variant integrates advanced analog peripherals, making it suited to mixed signal-control designs. The industrial temperature grade (-I) covers -40C to +85C operation. Architecturally, the dsPIC33FJ core executes an optimized C compiler-friendly instruction set with DSP engine support, single-cycle MAC, and two address generation units, achieving up to 40 MIPS from a 3.0 V to 3.6 V supply. In-circuit serial programming (ICSP) via MPLAB SNAP or similar tools enables field updates. Typical applications include digital power supplies, motor control (BLDC/PMSM), and sensor signal processing where fast control loops meet mathematical intensity. Design consideration: keep VDD within 3.0-3.6 V and place 0.1 uF decoupling caps at every VDD/VSS pair; use the 10x10 mm TQFP thermal pad-free layout with solid ground plane for analog performance. This page synthesizes distributor pricing, pin-compatible family alternatives, and practical design notes not found in the manufacturer datasheet, as of 2026-09-27.

RFQ پەیوەندی
DSPIC33FJ64GP804T-I/PT - 16-bit DSC 40 MIPS 64KB Flash | Microchip
DSPIC33FJ64GP804T-I/PT

DSPIC33FJ64GP804T-I/PT - 16-bit DSC 40 MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GP804T-I/PT is a 16-bit Digital Signal Controller (DSC) delivering 40 MIPS performance with 64 KB of Flash program memory, DMA controller, and a 3.0V to 3.6V supply range, housed in a 44-pin TQFP (PT, 10x10 mm) surface-mount package rated for -40C to +85C industrial operation. A Digital Signal Controller combines the peripheral set and ease of use of a microcontroller with the computational throughput of a digital signal processor. In the power-management IC hierarchy, the DSC sits above a plain MCU because it adds DSP-class multiply-accumulate instructions, hardware fractional arithmetic, and high-speed ADC sampling, while retaining Flash self-programming, interrupts, and familiar development tools such as MPLAB X and the Explorer 16/32 Development Board. Key features of this device include the 40 MIPS dsPIC33F core executing an enhanced 16-bit instruction set with DSP extensions, 64 KB of self-programmable Flash, integrated DMA for data movement without CPU intervention, and multiple serial communications engines suited to motor control, digital power, and audio signal chains. The 21 I/O ports provide flexible peripheral mapping across the 44-pin footprint. From an architecture standpoint, the dsPIC33FJ64GP804 belongs to Microchip's GP (general purpose) family of dsPIC33FJ devices, which pairs the 16-bit CPU with advanced analog peripherals and supports the PIC24F, dsPIC, and PIC32 tool ecosystem. Software libraries, code examples, and Plug-In Modules (PIMs) are shared across the family, reducing development risk when scaling Flash density within the same pinout. Typical applications include digital power supplies and power factor correction, sensorless motor control drives, industrial automation nodes, and embedded audio or communications processing where 40 MIPS of DSP throughput at 3.3V is sufficient. When designing with this DSC, budget the 3.0V-3.6V rail carefully and place 0.1uF decoupling capacitors at every VDD/VSS pair; the tape-and-reel (1200 units) packing suits automated SMT assembly lines. This page synthesizes distributor pricing, same-brand drop-in alternatives within the dsPIC33FJ 44-pin TQFP family, and practical design notes not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33FJ64GS406-I/MR - 16-bit DSC, 64KB Flash, 50MIPS | Microchip
DSPIC33FJ64GS406-I/MR

DSPIC33FJ64GS406-I/MR - 16-bit DSC, 64KB Flash, 50MIPS | Microchip

The Microchip Technology DSPIC33FJ64GS406-I/MR is a 16-bit digital signal controller (DSC) combining MCU and DSP engine cores, delivering 64KB of on-chip flash memory and 50 MIPS performance in a 64-pin VQFN (9x9 mm) package. It belongs to the GS series optimized for digital power conversion, integrating a high-speed PWM module, high-speed ADC, and analog comparators on a single die. A digital signal controller is a hybrid device that merges the control-flow convenience of a microcontroller (MCU) with the multiply-accumulate (MAC) throughput of a digital signal processor (DSP). Within the power-management semiconductor hierarchy, a DSC sits between a general-purpose MCU and a dedicated power-management IC, executing closed-loop control algorithms for switch-mode power supplies in real time. Key features include the high-speed PWM peripheral engineered for SMPS topologies, a high-speed analog-to-digital converter that can synchronize conversions to the PWM cycle, and multiple analog comparators for cycle-by-cycle current limiting. The device is currently listed by Microchip as In Production, and the industrial temperature suffix (-I) covers -40C to +85C operation. Architecturally, the dsPIC33FJ64GS406 pairs a modified Harvard 16-bit CPU with DSP instructions (MAC, DSP multiply) so that proportional-integral compensators and current-mode control loops execute with deterministic timing. The flash program memory is 64KB, sufficient for complex multi-loop control firmware including PFC stages, resonant converters, and digital ballast algorithms. According to the Microchip family data sheet (document 70000591f), the GS family devices specifically target common multi-loop digital switch-mode power supplies and digital power-conversion applications such as AC-to-DC converters, DC-to-DC converters, power factor correction, and uninterruptible power supplies. Typical applications include interleaved power factor correction (PFC) front ends - Microchip ships a reference design using this controller that accepts universal AC input and produces a single high-voltage DC output up to 350W - plus LLC and full-bridge DC-DC converters, solar micro-inverters, and server power supplies. A key design consideration: keep ICSP (PGECx/PGEDx) programming trace lengths short, and always use a matched PGECx/PGEDx pair - if PGEC2 carries ICSPCLK, ICSPDAT must connect to PGED2. All VDD/VSS pins must be connected and decoupled. This page synthesizes distributor pricing tiers, drop-in family alternatives, and practical digital-power design notes not found in the manufacturer data sheet.

RFQ پەیوەندی
DSPIC33FJ64GS406-I/PT - 16-bit DSC, 40MIPS, 64KB Flash | Microchip
DSPIC33FJ64GS406-I/PT

DSPIC33FJ64GS406-I/PT - 16-bit DSC, 40MIPS, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS406-I/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance with 64KB of flash program memory, operating from a 3V to 3.6V supply and housed in a 64-pin TQFP (PT) package rated for -40C to +125C industrial temperatures. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits between general-purpose MCUs and full DSPs: it offers Harvard-architecture dual-bus fetching, DSP multiply-accumulate instructions, and, in the GS family, purpose-built switch-mode power supply (SMPS) peripherals. This makes the dsPIC33FJ GS family the de-facto standard for fully digital power conversion, where control loops execute at switching frequencies of 100 kHz to 1 MHz. Key features of this part center on digital power conversion: a high-speed PWM module with complementary outputs, dead-time insertion, and fault protection; a high-speed 10-bit ADC capable of sampling multiple channels simultaneously with the PWM for tightly coupled control loops; and on-chip comparators. Peripherals supporting common multi-loop digital SMPS topologies include AC-DC converters, DC-DC converters, power factor correction (PFC), and uninterruptible power supplies, per the Microchip product page. The 16-bit dsPIC33F CPU core executes modified Harvard instructions with hardware multiply-accumulate, division assist, and 40 MIPS maximum operation at 3.3V. DMA channels move ADC results and PWM data without CPU intervention, freeing cycles for the control-law computation. Flash self-programming supports field firmware updates in deployed power supplies. Typical applications include interleaved power factor correction stages (Microchip's Interleaved PFC reference design produces 350W from universal AC input), server and telecom DC-DC bricks, solar micro-inverters, battery chargers, and uninterruptible power supply (UPS) control boards. The industrial temperature grade and 64 I/O-capable pin count suit multi-rail power systems. Design consideration: all VDD/VSS pairs must be decoupled, and ICSP programming requires using a matched PGECx/PGEDx pair - ICSPCLK and ICSPDAT must come from the same pair number. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33FJ64GS606-50I/PT - 16-bit DSC 50MIPS 64KB Flash | Microchip
DSPIC33FJ64GS606-50I/PT

DSPIC33FJ64GS606-50I/PT - 16-bit DSC 50MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS606-50I/PT is a 16-bit Digital Signal Controller (DSC) delivering 50 MIPS performance with 64 KB of Flash program memory and 9 KB of RAM, housed in a 64-pin TQFP (10x10 mm) surface-mount package rated for industrial temperatures from -40C to +85C. A Digital Signal Controller combines the computational architecture of a digital signal processor (DSP) - including a barrel shifter, multiply-accumulate (MAC) hardware, and multiple internal buses - with the peripheral integration and control flexibility of a microcontroller (MCU). The dsPIC33F family from Microchip sits within the broader 16-bit microcontroller hierarchy and is purpose-built for embedded control tasks that also require fast mathematical processing, such as digital power conversion and motor control. Key differentiating features of the DSPIC33FJ64GS606 include a high-speed PWM module purpose-designed for switch-mode power supplies (SMPS), a high-speed on-chip ADC for simultaneous sampling of multiple channels, and integrated analog comparators - a combination that allows a single chip to close digital control loops for power converters. The device also integrates 4 DMA channels and 7 timers, offloading data movement from the CPU core. Architecturally, the dsPIC33F core supports boundary scan (JTAG) for board-level test, multiple low-power modes, and In-Circuit Serial Programming (ICSP) via the PGECx/PGEDx pins, simplifying field upgrades and debugging with tools such as the MPLAB ecosystem. Typical applications include digital power supplies, interleaved power factor correction (PFC) stages - for which Microchip provides a dedicated reference design - uninterruptible power supplies (UPS), battery chargers, and embedded motor control. When designing with this device, keep ICSP programming trace lengths short and budget the 3.0 V to 3.6 V supply rail carefully for the analog peripherals. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design guidance not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33FJ64GS606-E/MR - 16-bit DSC 40MIPS 64KB | Microchip
DSPIC33FJ64GS606-E/MR

DSPIC33FJ64GS606-E/MR - 16-bit DSC 40MIPS 64KB | Microchip

The Microchip Technology DSPIC33FJ64GS606-E/MR is a 16-bit digital signal controller (DSC) delivering 40 MIPS from 64KB (64K x 8) of Flash program memory and 9.216KB of RAM, housed in a 64-pin VQFN (9x9 mm, MR) package with exposed pad and an extended -40C to +125C temperature rating (E suffix). A digital signal controller combines the compute power of a DSP engine with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, a DSC sits between general-purpose MCUs and dedicated digital power ICs: it executes closed-loop control algorithms for switch-mode power conversion while integrating the analog and timing peripherals those loops require. The dsPIC33F family is Microchip's 16-bit DSC line purpose-built for digital power. Key features include a high-speed 16-bit PWM module with complementary outputs and dead-time control, a high-speed 10-bit ADC, analog comparators, four DMA channels, a barrel shifter DSP engine, and boundary-scan (JTAG-capable) debug support. The supply range is 3V to 3.6V (single 3.3V rail), and the operating frequency reaches 40 MIPS, sufficient for multi-loop digital power control at practical switching frequencies. Architecturally, the device pairs a 16-bit RISC CPU with a DSP multiply-accumulate engine and multiple internal buses, allowing control-law computation (PI/PID compensation) to run in parallel with PWM update and ADC sampling. AEC-Q100 and TS 16949 alignment per Microchip USA reporting makes it suitable for automotive-adjacent and industrial power designs. Typical applications are AC-to-DC converters, DC-to-DC converters, power factor correction (PFC), uninterruptible power supplies (UPS), and solar inverters, where multi-loop SMPS control benefits from the integrated high-speed PWM and fast ADC sampling. Design consideration: budget the 3.3V supply decoupling carefully and verify ADC sampling-to-PWM-update latency against your switching frequency; extended-temperature designs should also account for Flash endurance and retention derating above 105C. This page adds value beyond the datasheet with drop-in alternative cross-references, distributor pricing tiers as of 2026-09-27, and practical digital-power design notes compiled for engineers and buyers.

RFQ پەیوەندی
DSPIC33FJ64GS606-I/MR - 16-bit DSC 40MIPS 64KB Flash | Microchip
DSPIC33FJ64GS606-I/MR

DSPIC33FJ64GS606-I/MR - 16-bit DSC 40MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS606-I/MR is a 16-bit digital signal controller (DSC) delivering up to 40 MIPS at 40 MHz with 64 KB of flash program memory and 9216 words of RAM, housed in a lead-free plastic QFN-44 package measuring 8 x 8 mm. A digital signal controller combines the compute throughput of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). Within the power-management hierarchy, the dsPIC33FJ GS family sits at the top: microcontroller -> digital signal controller -> digital power controller. The GS subfamily is purpose-built for switch-mode power supply (SMPS) control, where deterministic interrupt latency and specialized analog peripherals matter more than general-purpose I/O volume. Key features include a high-speed PWM module purpose-designed for multi-loop power conversion, a high-speed ADC for current- and voltage-loop sampling, and integrated analog comparators that offload cycle-by-cycle current limiting from software. The device provides 8 timers, 4 DMA channels, and 2 serial I/O ports, with in-circuit (ICSP) and in-application programming plus IEEE 1149.2-compatible JTAG boundary scan for production programming and board-level test. Architecturally, the CMOS 16-bit core executes DSP-class multiply-accumulate instructions for control-law computation (PID, 3P3Z compensators), supporting multiple internal bus architectures that keep instruction fetch, data access, and DMA transfers from contending. Supply voltage is 3 V to 3.6 V, and the -I temperature grade covers -40C to +85C for industrial environments. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies (UPS), and multi-loop digital SMPS designs. Microchip provides an interleaved PFC reference design specifically for this SMPS dsPIC family. Design consideration: the QFN package exposes its ground pad beneath the die; a solid VSS grid and thermal via array under the package are essential for signal integrity in high dv/dt power environments. This page synthesizes verified distributor pricing, drop-in family alternatives, and practical design guidance not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33FJ64GS606T-50I/PT - 16-bit 50MIPS DSC 64KB Flash | Microchip
DSPIC33FJ64GS606T-50I/PT

DSPIC33FJ64GS606T-50I/PT - 16-bit 50MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS606T-50I/PT is a 16-bit digital signal controller (DSC) delivering 50 MIPS performance with 64KB of flash memory and 9KB of RAM, housed in a 64-pin TQFP (10x10 mm) surface-mount package rated for -40C to +85C industrial operation at 3.3V. A digital signal controller combines the computational throughput of a DSP core with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP, making it the preferred device class for closed-loop digital switch-mode power supplies (SMPS) where fast control loops, high-resolution PWM and on-chip analog are all mandatory. Key differentiating features of the GS606 include dedicated SMPS PWM modules with high resolution for precise duty-cycle control, two quadrature encoder interface (QEI) inputs for motor feedback, an on-chip CAN module for system communication, a DAC for reference generation, and four analog comparators for fast overcurrent and cycle-by-cycle protection. Per Microchip product data, the device enumerates as a 16-bit DSC with 64KB Flash, 9KB RAM, 50 MHz operation, SMPS PWM, 2 QEI, CAN, DAC and 4 comparators. Architecturally, the dsPIC33F core pairs a modified Harvard 16-bit pipeline with DSP multiply-accumulate instructions, allowing single-cycle MAC operations in control-loop interrupt service routines. The deep analog integration lets the GS606 close voltage and current loops entirely on-chip, reducing external component count and board area. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies, and digitally controlled lighting or motor-drive power stages, as cited on the Microchip dsPIC33FJ64GS606 product page. Design consideration: budget the PWM resolution against the instruction clock and verify comparator response times for your overcurrent trip threshold; the TQFP thermal pad-free package requires solid ground pours for high-frequency switching layouts. This page synthesizes distributor availability data, same-family drop-in options, and digital-power design notes not consolidated on the manufacturer product page.

RFQ پەیوەندی
DSPIC33FJ64GS606T-I/MR - 16-bit 40MIPS DSC 64KB | Microchip
DSPIC33FJ64GS606T-I/MR

DSPIC33FJ64GS606T-I/MR - 16-bit 40MIPS DSC 64KB | Microchip

The Microchip Technology DSPIC33FJ64GS606T-I/MR is a 16-bit digital signal controller (DSC) from the dsPIC33F GS family, delivering 40 MIPS performance with 64 KB (64K x 8) of program flash memory and 9216 words of RAM, housed in a 64-pin VQFN (MR) package with exposed thermal pad operating at 3.3V. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and control flexibility of a microcontroller. Within the power-management hierarchy, a DSC sits above a standard MCU for closed-loop control tasks: it executes control loops fast enough for switch-mode power conversion while integrating specialized analog and timing peripherals on one die. Key features include a high-speed PWM module purpose-built for digital switch-mode power supplies (SMPS), a high-speed 10-bit ADC with multiple sample-and-hold circuits for simultaneous multi-rail sampling, analog comparators, and four DMA channels. The device supports In-Circuit Serial Programming (ICSP) and debugging via PGECx/PGEDx pins, plus boundary-scan capability and low-power modes. Technically, the dsPIC33FJ64GS606 core pairs a 16-bit modified Harvard architecture with DSP engine instructions (fixed-point format, barrel shifter), letting a single device run a PFC loop and downstream DC-DC loops concurrently. Peripheral pin-select and rich timer resources reduce external glue logic in compact power supplies. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies, and digital lighting ballasts. The GS family was explicitly designed by Microchip for these multi-loop digital power-conversion applications. Design consideration: keep the ICSP connector trace lengths to PGECx/PGEDx as short as possible for reliable in-circuit debugging, and verify that the 40 MIPS grade (-I, industrial temperature) matches your switching-frequency headroom; a 50 MIPS variant exists if more loop bandwidth is required. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
DSPIC33FJ64GS606T-I/PT - 16-bit DSC 40MIPS 64KB Flash | Microchip
DSPIC33FJ64GS606T-I/PT

DSPIC33FJ64GS606T-I/PT - 16-bit DSC 40MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS606T-I/PT is a 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS from 64KB of Flash program memory with 9KB of RAM, housed in a 64-lead TQFP (10x10 mm) surface-mount package operating from a 3.3V supply. A Digital Signal Controller combines the computational power of a digital signal processor with the peripheral integration and control architecture of a microcontroller, sitting between an MCU and a DSP in the embedded hierarchy. In the digital power domain, DSCs replace analog control loops with firmware-executed PID compensators, enabling programmable, adaptive switch-mode power supplies. The GS606 variant is purpose-built for digital power conversion: it integrates a high-speed PWM module with multiple output pairs, complementary outputs, dead-time control, and fault inputs, alongside a high-speed 10-bit ADC with simultaneous multi-channel sampling and analog comparators. These peripherals allow a single device to close both the fast inner current loop and the slower outer voltage loop in SMPS topologies. The device also provides 8 timers, 4 DMA channels, and serial communication interfaces (UART, SPI, I2C) per the distributor-listed feature set. Architecturally, the dsPIC33F core uses a 16-bit modified Harvard pipeline with DSP instructions (MAC, multiply) and two 40-bit accumulators, sustaining 40 MIPS operation. In-Circuit Serial Programming (ICSP) via PGECx/PGEDx pins supports field updates, and Microchip recommends short ICSP traces on the PCB. Typical applications include AC-DC converters, DC-DC converters, Power Factor Correction (PFC) stages, uninterruptible power supplies (UPS), solar inverters, LED drivers, and high-performance motor control, where high-speed analog acquisition and flexible PWM are mandatory. For design, budget the 3.3V rail carefully and route PWM outputs with controlled edge rates to limit switching-node ringing; dead-time settings must be validated against MOSFET gate-charge specifications to prevent shoot-through. This page synthesizes verified distributor listings, datasheet-family cross references, and digital-power design guidance not consolidated on typical catalog pages.

RFQ پەیوەندی
DSPIC33FJ64GS608-50I/PT - 16-bit 50MIPS DSC | Microchip
DSPIC33FJ64GS608-50I/PT

DSPIC33FJ64GS608-50I/PT - 16-bit 50MIPS DSC | Microchip

The Microchip Technology DSPIC33FJ64GS608-50I/PT is a 16-bit digital signal controller (DSC) combining MCU ease of use with DSP performance, delivering 50 MIPS from a dsPIC33F core with 64KB (64K x 8) Flash program memory and 9KB RAM, housed in an 80-pin TQFP (12x12 mm) package. A digital signal controller is a hybrid semiconductor that merges the control peripherals of a microcontroller with the computational throughput of a digital signal processor. Within the power-management semiconductor hierarchy, the DSC sits above general-purpose MCUs and below dedicated DSPs, making it the preferred controller class for closed-loop digital power conversion where fast, deterministic control loops are required. Key differentiating features include the high-speed PWM module with special SMPS operating modes, a high-speed 10-bit ADC with multiple sample-and-hold circuits, and on-chip analog comparators - a peripheral set purpose-built for multi-loop digital switch-mode power supplies (SMPS). The device also provides 2 QEI modules, a CAN controller, DAC outputs, and 4 DMA channels for efficient data movement. Architecturally, the dsPIC33F core executes DSP instructions (MAC, barrel shifter) with dual operands fetched in a single cycle, enabling digital filter algorithms and high-precision control-loop computations at 50 MIPS. Extended-temperature variants such as the /50E grade and industrial (-40C to +85C) /50I grade share the same die and peripheral map. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies (UPS), and digital lighting or battery-charging power stages. Design consideration: connect every VDD/VSS pair and pair PGECx/PGEDx consistently for ICSP programming - the device has multiple ICSP pin pairs that must be used as matched pairs. This page synthesizes distributor pricing, drop-in same-footprint alternatives, and practical design notes not found in the manufacturer datasheet, with pricing referenced as of 2026-09-27.

RFQ پەیوەندی
DSPIC33FJ64GS608-I/PT - 16-bit DSC 40MIPS 64KB Flash | Microchip
DSPIC33FJ64GS608-I/PT

DSPIC33FJ64GS608-I/PT - 16-bit DSC 40MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS608-I/PT is a 16-bit Digital Signal Controller (DSC) delivering 40 MIPS performance with 64KB (64K x 8) of Flash program memory, operating from a 3V to 3.6V supply in an 80-pin TQFP (12x12 mm) surface-mount package rated from -40C to +85C. A Digital Signal Controller combines the compute throughput of a Digital Signal Processor (DSP) with the peripherals, ease of use, and interrupt structure of a microcontroller (MCU). Within the power-management hierarchy, the dsPIC33F GS family sits at the controller layer of a digital switch-mode power supply (SMPS), executing the control loop that a dedicated analog controller would otherwise implement in hardware. The GS series is purpose-built for digital power conversion: it integrates high-speed PWM peripherals, high-speed ADC and analog comparators, the core building blocks for multi-loop SMPS control. According to Microchip product documentation, these devices support AC-to-DC converters, DC-to-DC converters, Power Factor Correction (PFC), and uninterruptible power supplies (UPS). The 40 MIPS dsPIC33F core is designed to execute digital filter algorithms, high-speed precision digital control loops, and digital audio and speech processing. Its DSP engine supports MAC-class instructions that enable the tight, deterministic loop timing required by peak-current-mode and voltage-mode converters switching at hundreds of kilohertz. In-Circuit Serial Programming (ICSP) via PGECx/PGEDx pin pairs allows field firmware updates without removing the device from the board. Typical applications include interleaved PFC front ends (Microchip publishes a 350W interleaved PFC reference design for this family), telecom and server DC-DC bricks, solar micro-inverters, UPS inverter control, and battery chargers. Design consideration: all VDD/VSS pairs must be decoupled and connected, and the ICSP PGECx/PGEDx pair must be routed as a matched pair with short traces to the programming connector; using PGEC2 for ICSPCLK requires PGED2 for ICSPDAT. This page adds value beyond the datasheet by synthesizing distributor pricing, drop-in family alternatives, cross-reference guidance, and practical design notes in one place.

RFQ پەیوەندی
DSPIC33FJ64GS608T-50I/PT - 16-bit DSC 50MIPS 64KB | Microchip
DSPIC33FJ64GS608T-50I/PT

DSPIC33FJ64GS608T-50I/PT - 16-bit DSC 50MIPS 64KB | Microchip

The Microchip Technology DSPIC33FJ64GS608T-50I/PT is a 16-bit digital signal controller (DSC) delivering 50 MIPS performance with 64KB of Flash memory and 9KB of RAM, housed in an 80-pin TQFP surface-mount package rated for -40C to +85C operation from a 3V to 3.6V supply. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and control-friendly architecture of a microcontroller. Within the power-management hierarchy, the dsPIC33FJ GS family sits above generic MCUs for digital power tasks: its instruction set supports fast PID and compensator loops, while dedicated high-speed PWM hardware closes control loops without CPU intervention. This makes DSCs the de-facto standard for digitally controlled switch-mode power supplies and power factor correction stages. Key features include dedicated high-speed PWM peripherals with complementary outputs, dead-time control and fault protection tailored for SMPS topologies; on-chip high-speed ADC modules synchronized to the PWM for cycle-by-cycle sampling; multiple analog comparators for overcurrent and overvoltage protection; CAN for industrial communication; DAC channels and QEI inputs for motion-oriented power conversion. The 50 MIPS core executes one instruction per cycle, allowing multi-loop control schemes in a single device. Architecturally, the device uses a modified Harvard 16-bit core with DSP multiply-accumulate instructions, separate program and data buses, and hardware looping. The Flash-based program memory supports in-circuit self-programming, and the supply range of 3.0V to 3.6V matches standard 3.3V rails. According to Microchip product documentation, the family explicitly targets AC to DC converters, DC to DC converters, power factor correction, and uninterruptible power supplies. Typical applications include digitally controlled AC-DC power supplies, interleaved PFC front ends, DC-DC converters, UPS systems, solar inverters, battery chargers, and LED drivers, where the PWM-ADC-comparator pipeline handles fast current-mode control while the CPU executes slower voltage and system loops. Design consideration: keep the 3.3V supply within the 3.0V to 3.6V window, decouple all VDD/VDDCORE pins with low-ESR ceramics close to the TQFP, and route PWM outputs away from analog ADC inputs to preserve conversion accuracy. This page synthesizes distributor pricing, drop-in alternatives, design notes, and comparison data not found on the manufacturer product page alone.

RFQ پەیوەندی
DSPIC33FJ64GS610-I/P - 16-bit DSC 40MIPS 64KB Flash | Microchip
DSPIC33FJ64GS610-I/P

DSPIC33FJ64GS610-I/P - 16-bit DSC 40MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS610-I/P is a high-performance 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS from a 64 KB Flash program memory and 9216 words of RAM, supplied at 3.0V to 3.6V and housed in a 100-pin TQFP (14x14 mm, 0.4 mm pitch) surface-mount package. A Digital Signal Controller combines the compute throughput of a DSP engine with the peripheral integration and deterministic control of a microcontroller. Within the power-management semiconductor hierarchy, a DSC sits above a general-purpose MCU for closed-loop control tasks and below a full application processor, occupying the sweet spot for real-time switch-mode power supply (SMPS) control loops that require fast, cycle-accurate PWM and ADC interaction. Key features include a dedicated high-speed PWM module with complementary outputs and dead-time control, a high-speed 10/12-bit ADC, and integrated analog comparators - the exact peripheral trio required for voltage-mode, current-mode, and multi-loop digital power conversion. The device also provides In-Circuit Serial Programming (ICSP), in-application programming, two program and two complex data breakpoints, and IEEE 1149.2-compatible (JTAG) boundary scan for production test. Architecturally, the dsPIC33FJ GS family couples a 16-bit modified Harvard core with DSP multiply-accumulate instructions, allowing single-cycle MAC operations for filter and control-law computation. Industrial operating temperature (-40C to +85C) and a CMOS process support demanding embedded environments. Typical applications include AC-DC converters, DC-DC converters, power factor correction (PFC) stages, uninterruptible power supplies (UPS), and solar/LED power systems where deterministic multi-loop control is mandatory. For design, place the ICSP connector traces (PGECx/PGEDx) as short as possible, per the Microchip datasheet, and pair any PWM/ADC pin usage with proper analog grounding around the comparators. This page adds value beyond the manufacturer datasheet by synthesizing distributor availability data, same-package drop-in alternatives, practical design notes, and pricing context in one citable reference.

RFQ پەیوەندی
DSPIC33FJ64GS610-I/PF - 16-bit DSC 40 MIPS 64KB Flash | Microchip
DSPIC33FJ64GS610-I/PF

DSPIC33FJ64GS610-I/PF - 16-bit DSC 40 MIPS 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64GS610-I/PF is a high-performance 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS from a CMOS core with 64KB (64K x 8) of FLASH program memory and 9216 words of RAM, housed in a 100-pin TQFP (14x14 mm, 0.4 mm terminal pitch) surface-mount package. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and deterministic control of a microcontroller. Within the power-management IC hierarchy, a DSC sits above a general-purpose MCU for closed-loop control tasks: it samples feedback with fast analog-to-digital converters, executes control-loop mathematics, and drives power stages through dedicated PWM hardware. The dsPIC33F family is Microchip's 16-bit DSC platform, and the GS series is its switch-mode power supply (SMPS) optimized subset. Key features of the DSPIC33FJ64GS610 include the 40 MIPS 16-bit core, 64KB self-programming FLASH, 3.0V to 3.6V single-supply operation, industrial temperature rating (-40C to +85C), and peripheral sets purpose-built for digital power: high-resolution PWM modules, fast analog comparators and ADCs for current-mode control, plus multiple UART, SPI and I2C ports for supervisory communication. In-Circuit Serial Programming (ICSP) via PGECx/PGEDx pin pairs enables field firmware updates. Architecturally, the device pairs a 16-bit modified Harvard core with DSP instructions (MAC, DSP multiply) so that proportional-integral and predictive control loops execute in single-microsecond budgets, a decisive advantage over software-timed 8-bit MCUs in converters switching at 100 kHz and above. Typical applications include AC-DC converters, DC-DC converters, power factor correction (PFC) stages - including interleaved PFC reference designs up to 350W - and uninterruptible power supplies (UPS), where the SMPS-focused peripherals directly implement voltage-mode, current-mode and multi-loop control. Design consideration: use a PGECx/PGEDx pair consistently (for example PGEC2 with PGED2) for ICSP and debugging, and keep ICSP traces short per the Microchip datasheet layout guidance. This page synthesizes distributor pricing, pin-compatible family alternatives, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-27.

RFQ پەیوەندی
DSPIC33FJ64MC202-E/MM - 16-bit DSC 40MIPS 64KB Flash QFN-28 | Microchip
DSPIC33FJ64MC202-E/MM

DSPIC33FJ64MC202-E/MM - 16-bit DSC 40MIPS 64KB Flash QFN-28 | Microchip

The Microchip Technology DSPIC33FJ64MC202-E/MM is a 16-bit digital signal controller (DSC) delivering up to 40 MIPS with 64 KB of Flash program memory and 8 KB of SRAM, housed in a 28-pin VQFN (MM) package measuring 6 x 6 x 0.9 mm with an exposed pad. It operates from a 3.3 V supply across the extended industrial temperature range of -40C to +125C and carries AEC-Q100 automotive qualification. A digital signal controller combines the peripheral set and ease of use of a microcontroller with the computational throughput of a DSP engine. In the power-management hierarchy, a DSC sits between general-purpose MCUs and dedicated DSPs: it executes deterministic control loops (PID, field-oriented control) while simultaneously handling communication, sequencing, and housekeeping tasks. This makes DSCs the de-facto controller class for digitally controlled power conversion and motion systems. Key features of the DSPIC33FJ64MC202-E/MM include its 40 MIPS 16-bit modified Harvard architecture core with DSP multiply-accumulate instructions, dedicated motor-control PWM peripherals designed for three-phase inverter drives, up to 8 DMA channels that move data without CPU intervention, and 5 timers for multi-rate control loops. According to Microchip, the dsPIC33F family is pin compatible with the PIC24HJ family and shares a very high degree of compatibility with dsPIC30F devices, enabling seamless migration between families. Technically, the device integrates an on-chip high-speed analog front end (the MC variant targets the advanced-analog motor control market), barrel shifter, modulo and bit-reversed addressing for FFT algorithms, and dual inline Flash/SRAM buses that allow instruction fetch and data access in the same cycle. The extended-temperature E suffix supports thermally demanding automotive and industrial environments, while the QFN exposed-pad package improves heat transfer to the PCB. Typical applications include brushless DC and permanent-magnet synchronous motor drives, digital power supplies ( LLC, totem-pole PFC), solar micro-inverters, and embedded control in automotive auxiliary systems. The motor-control PWM with complementary outputs and dead-time insertion directly maps onto half-bridge topologies. Design-wise, plan the 3.3 V rail with adequate decoupling on both VDD pins and solder the exposed thermal pad to a ground pour for lowest junction-to-ambient impedance. Note that achieving the 40 MIPS ceiling requires the internal PLL from the oscillator source. This page synthesizes distributor pricing from Mouser, DigiKey, LCSC and Newark, same-package drop-in alternatives, and practical design notes that go beyond the raw datasheet listing.

RFQ پەیوەندی
DSPIC33FJ64MC202-E/SP - 16-bit DSC 64KB Flash 40MIPS | Microchip
DSPIC33FJ64MC202-E/SP

DSPIC33FJ64MC202-E/SP - 16-bit DSC 64KB Flash 40MIPS | Microchip

The Microchip Technology DSPIC33FJ64MC202-E/SP is a 16-bit digital signal controller (DSC) delivering 40 MIPS from 64KB (64K x 8) of Flash memory, housed in a 28-pin SPDIP through-hole package and rated for -40C to +125C operation at 3V to 3.6V supply. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. In the product hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP: it executes high-speed, repetitive multiply-accumulate loops for control mathematics while integrating motor-control PWM, high-speed ADC, and DMA peripherals on one chip. The dsPIC33F family from Microchip Technology is pin compatible with the PIC24HJ family, giving designers a migration path between general-purpose and DSP-centric pinouts. Key features of the DSPIC33FJ64MC202-E/SP include the 16-bit modified Harvard dsPIC core clocked at up to 40 MIPS, 64KB Flash program memory with self-programming capability, motor-control PWM modules targeted at three-phase and BLDC drives, a direct memory access (DMA) controller that offloads ADC and UART data transfers from the CPU, and advanced analog peripherals for current and voltage sensing. The -E extended temperature grade (-40C to +125C) supports industrial and automotive-adjacent environments. Technically, the 16-bit RISC architecture uses two 40-bit accumulators and hardware DSP multiply-accumulate instructions, enabling single-cycle MAC operations for FOC (field-oriented control), PID loops, and digital filtering. The wide 28-pin SPDIP package suits breadboarding, prototyping, education, and legacy through-hole production where hand soldering and socketing matter. Typical applications include brushless DC and permanent-magnet motor control, digital power supplies and PFC stages, sensor signal conditioning with on-chip filtering, and industrial instrumentation requiring deterministic 40 MIPS control loops. Design consideration: the dsPIC33F core requires a VCAP/VDDCORE capacitor on the internal regulator output pin, and the supply must remain within 3.0V-3.6V; the on-board regulator simplifies 3.3V rail design but this capacitor must never be omitted. This page synthesizes distributor pricing, drop-in family alternatives, pinout detail, and practical design notes not consolidated in the manufacturer datasheet. Pricing references LCSC data as of 2026-09-27 (from $5.8868, in stock).

RFQ پەیوەندی
DSPIC33FJ64MC202-I/MM - 16-bit DSC 40MIPS 64KB Flash QFN-28 | Microchip
DSPIC33FJ64MC202-I/MM

DSPIC33FJ64MC202-I/MM - 16-bit DSC 40MIPS 64KB Flash QFN-28 | Microchip

The Microchip Technology DSPIC33FJ64MC202-I/MM is a 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS from a 64 KB Flash program memory and 8 KB SRAM, housed in a 28-pin QFN-S (MM) 6x6 mm surface-mount package with exposed pad, rated for -40C to +85C industrial operation at 3.3V. A Digital Signal Controller combines the compute architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller unit (MCU). DSCs sit within the broader embedded processor hierarchy between general-purpose MCUs and dedicated DSPs, and are optimized for control loops that rely on high-speed, repetitive computations such as motor control, digital power conversion, and sensor signal processing. Key features include the dsPIC33F 16-bit core with DSP engine (17-bit x 17-bit multiplier, 40-bit accumulator, dual operand fetch), Motor Control PWM, 8 DMA channels, 5 timers, 2 serial I/O ports supporting UART, SPI and I2C, and an advanced analog block with a 10-bit ADC. According to the Microchip product page, the dsPIC33F family is pin compatible with the PIC24HJ family and shares a high degree of compatibility with dsPIC30F devices, enabling seamless migration. Technical depth: the modified Harvard architecture with multiple internal buses allows concurrent instruction fetch and data access, while hardware looping and bit-reversed addressing accelerate FFT and filter kernels. CMOS process operation at 3.3V keeps power manageable, and ICSP/ICD programming via PGECx/PGEDx pairs supports in-circuit debugging with Microchip tools such as MPLAB and PICkit/ICD programmers. Typical applications include brushless DC and PMSM motor control, digital power supplies and PFC stages, audio processing, and industrial sensor interfaces - all domains where deterministic 40 MIPS DSP throughput and dedicated PWM peripherals are decisive. Design consideration: pin-compatible migration within the family lets you scale Flash (16-64 KB) without PCB changes, but verify VCAP/VDDCORE capacitor requirements on all layouts. This page synthesizes distributor pricing, drop-in alternatives, pinout detail, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی