DSP
بەرهەمەکان (1,300+)
ADSP-21563KSWZ8 - 800MHz SHARC+ DSP | Analog Devices | Audio
The Analog Devices ADSP-21563KSWZ8 is an 800 MHz single-core SHARC+ digital signal processor with 640 KB of L1 SRAM, 512 KB of shared L2 SRAM, and a 120-lead LQFP exposed-pad package measuring 14 mm by 14 mm. It combines fixed- and floating-point processing in a deterministic architecture designed for low-latency real-time audio workloads. A digital signal processor is a semiconductor optimized to execute mathematically intensive operations on streams of audio, sensor, or communications data. The ADSP-21563 belongs to the SHARC family, and the ADSP-2156x generation uses the SHARC+ architecture with SIMD execution and Super Harvard Architecture. This hierarchy places the device between general-purpose microcontrollers and dedicated fixed-function codecs, providing substantially higher throughput for parallelizable signal-processing workloads. The processor's principal features include an 800 MHz operating speed, 640 KB of L1 memory, and 512 KB of shared L2 memory. This combination supports real-time filtering, Fourier analysis, audio mixing, noise reduction, and acoustic-processing algorithms without requiring frequent external-memory transfers. Its deterministic execution characteristics are particularly valuable when audio latency must remain bounded across changing input conditions. The ADSP-2156x architecture is specifically engineered for applications requiring highly deterministic, extremely low-latency real-time audio processing. Those characteristics are relevant to automotive active and road-noise cancellation, acoustic echo cancellation, noise reduction, voice user interfaces, audio zoning, in-car communications, engine-sound processing, consumer audio, and professional audio equipment. The family's SIMD architecture allows multiple operations to be processed in parallel at the 800 MHz clock rate. The 120-lead LQFP exposed-pad package provides access to the processor's high-performance signal-chain and connectivity resources in a surface-mount format. The exposed pad supports heat transfer from the device to the PCB, making copper-plane layout and thermal verification important when processing sustained real-time workloads. The package's 14 mm by 14 mm body is larger than compact leadless packages but remains suitable for industrial, automotive, consumer, and professional audio boards. Use the exposed pad as a thermal and, where the device design requires it, electrical connection according to the manufacturer's land pattern and reference design. Keep high-speed signal routes short, provide continuous return paths, and verify the junction-temperature margin across ambient temperature and processor activity. Firmware, peripheral configuration, clocking, and memory interfaces must be validated against the device's current manufacturer documentation. This product record combines processor architecture, memory configuration, package details, application guidance, compatible family options, and practical PCB considerations. It also distinguishes verified ADSP-21563 characteristics from parameters that require confirmation in the manufacturer datasheet, helping engineers accelerate component selection without overlooking footprint, thermal, or software-migration constraints.
ADSP-21565KSWZ8 - 800MHz SHARC+ DSP | Analog Devices
The Analog Devices ADSP-21565KSWZ8 is a single-core SHARC+ fixed/floating-point digital signal processor rated at 800 MHz, with operation up to 1 GHz, 640 KB of L1 SRAM, and 1024 KB of shared L2 SRAM. It is packaged in a 120-lead LQFP with exposed pad, designated LQFP_EP, measuring 14 x 14 mm. The device supports deterministic, low-latency real-time processing for professional audio, automotive audio, communications, and industrial control systems. A digital signal processor is a specialized semiconductor that executes filtering, Fourier analysis, modulation, signal reconstruction, and other mathematically intensive operations in real time. SHARC+ processors combine a 64-bit architecture with parallel processing resources, dedicated memory, and high-speed peripherals. Within the broader hierarchy, this device belongs to the digital signal processor, embedded processor, and semiconductor categories while targeting applications that require predictable execution time and sustained data throughput. The processor's principal resources include 640 KB of L1 SRAM and 1024 KB of shared L2 SRAM. Its support for both fixed-point and floating-point arithmetic makes it suitable for mixed workloads involving digital audio filtering, active noise reduction, acoustic echo cancellation, communications, and control processing. The 800 MHz distributor rating reflects its nominal application clock, while the manufacturer positions the family for operation up to 1 GHz. Technical integration is supported by the 120-lead LQFP_EP package. The exposed thermal pad provides the primary path for heat removal, making layout and copper coverage important to sustained performance. The SHARC+ processor's deterministic execution model is particularly valuable when processing deadlines cannot vary with system load. Memory organization is also central to performance because filtering and matrix operations can move large volumes of data through tightly coupled local SRAM. Typical applications include automotive active noise cancellation, road-noise reduction, acoustic echo cancellation, voice user-interface processing, audio-zone controllers, professional audio equipment, communications receivers, and industrial monitoring systems. The processor's real-time signal-processing capability makes it useful where predictable latency, concurrent peripheral activity, and compact embedded control are required. Designers should allocate PCB copper around the exposed pad for thermal conduction, follow the manufacturer's multilayer-board and power-distribution recommendations, and verify signal integrity on high-speed memory and serial interfaces. Firmware, clocking, and peripheral configuration should also be validated with the processor's development environment before production deployment. This product record combines the manufacturer's device architecture and packaging information with ordering details, application guidance, package constraints, and engineering-focused comparisons. It also identifies same-family SHARC+ alternatives for preliminary design evaluation while emphasizing that firmware, clock configuration, memory requirements, and exposed-pad layout must be checked before any substitution is approved.
ADSP-21566BBCZ4 - 1 GHz SHARC+ DSP with 640KB L1 | Analog Devices
The Analog Devices ADSP-21566BBCZ4 is a single-core SHARC+ digital signal processor operating at up to 1 GHz, with 640 KB of L1 SRAM and 256 KB of shared L2 SRAM in a 400-ball CSP_BGA package measuring 17 x 17 mm. It supports fixed- and floating-point arithmetic, 64-bit processing, SIMD execution, and external DDR memory for data-intensive signal-processing workloads. A digital signal processor is a specialized semiconductor that executes mathematical operations on streaming data with deterministic timing. The ADSP-2156x family belongs to Analog Devices' SIMD SHARC+ family and implements the Super Harvard Architecture. Compared with a general-purpose microprocessor, this architecture organizes multiple computation units and memories to sustain high parallel throughput on filtering, Fourier-transform, modulation, and control algorithms. Principal features include a nominal 400 MHz listing with performance reaching up to 1 GHz, 640 KB of L1 SRAM, 256 KB of shared L2 SRAM, 64-bit fixed- and floating-point capability, and support for DDR. The large on-chip memory reduces external bus traffic for many real-time workloads, while the 400-ball CSP_BGA package supports dense routing on multilayer boards but requires careful escape routing and thermal management. The SHARC+ core is designed for high-throughput, single instruction, multiple data applications. Programmers can exploit parallel execution across the processor's SIMD computational units, while the split-memory organization provides high bandwidth for signal data. The ADSP-2156x processor family is positioned for communications, industrial control, audio, instrumentation, and embedded signal-processing systems where deterministic execution and substantial on-chip memory are important. Typical uses include professional audio and music-processing equipment, industrial vibration and condition-monitoring systems, communications infrastructure, radar and aerospace signal chains, medical acquisition equipment, and high-performance test and measurement instruments. A companion FPGA can handle external interfaces and data movement, while the DSP concentrates on filtering and complex arithmetic. Design the PCB with controlled-impedance routing, a solid ground-plane strategy, and short connections to the DSP power, clock, and memory interfaces. The 17 x 17 mm BGA requires via-in-pad or microvia escape patterns, and decoupling placement must follow the power-supply recommendations in the manufacturer data sheet. Validate thermal performance and DDR signal integrity in the final board stack-up before production release. This page organizes the manufacturer specifications, pin and package considerations, practical application guidance, and same-family replacement options into one engineering-focused reference. It also identifies where clock-grade, electrical, and detailed pin-function information must be confirmed in the ADSP-21566 data sheet before layout release.
ADSP-21566KBCZ4 - 400MHz SHARC+ DSP | Analog Devices
Analog Devices ADSP-21566KBCZ4 is a single-core SHARC+ digital signal processor rated at 400 MHz, with 640 KB of L1 memory, 256 KB of shared L2 SRAM, and DDR memory support in a 400-ball CSP_BGA package measuring 17 x 17 mm. The processor combines fixed-point and floating-point execution in a 64-bit architecture designed for deterministic, low-latency real-time signal processing. A digital signal processor is a specialized semiconductor used to execute mathematical operations on streams of audio, control, sensor, or communications data. Unlike a general-purpose processor, a DSP typically combines parallel execution hardware, structured memory, and optimized instruction sets. The ADSP-21566 belongs to the SHARC+ family, which extends the Super Harvard Architecture with SIMD processing optimized for demanding real-time workloads. Principal features include a 400 MHz SHARC+ core, 640 KB of L1 memory, 256 KB of shared L2 SRAM, DDR support, and a 64-bit fixed-point and floating-point processing capability. The local SRAM allows frequently accessed coefficients and sample buffers to remain close to the execution engine, reducing external-memory bottlenecks during iterative filtering and adaptive algorithms. The ADSP-21566KBCZ4 is specifically architected for deterministic real-time audio processing. Its SHARC+ core can execute multiple data lanes efficiently, making it suitable for acoustic echo cancellation, noise reduction, active and road-noise cancellation, voice processing, audio zoning, and in-car communication systems. DDR connectivity expands the working-memory capacity required by multichannel audio and large algorithmic data sets. Typical deployments include automotive cabin-noise control, microphone-array processing, speaker-driver adaptation, communications audio, industrial monitoring, and professional audio equipment. In these systems, the processor can execute filters, FFT-based analysis, adaptive beamforming, and noise-reduction algorithms while maintaining predictable response times. Board design requires careful DDR routing, multilayer PCB construction, controlled impedance, and a power-delivery network that meets the processor's switching and signal-integrity requirements. The 400-ball BGA also requires careful escape-routing planning and appropriate assembly inspection procedures, while thermal design must distribute heat across the package rather than relying on a small hot spot. This product overview combines the manufacturer specifications, source MPN information, package details, application guidance, comparison parameters, and practical replacement considerations to support engineering selection, PCB planning, sourcing, and hardware bring-up.
ADSP-21567BBCZ6 - 600MHz SHARC+ DSP with 1.5MB SRAM | Analog Devices
The Analog Devices ADSP-21567BBCZ6 is a 600 MHz fixed-point and floating-point SHARC+ digital signal processor with 640 KB of L1 SRAM, 512 KB of shared L2 SRAM, and DDR support in a 400-ball CSP_BGA package measuring 17 x 17 mm. The processor family supports clock rates up to 800 MHz, giving designers a scalable SHARC+ platform for demanding real-time signal-processing workloads. A digital signal processor is a semiconductor specifically designed to execute mathematical operations in real time. Unlike a general-purpose processor, a DSP is architected around predictable parallel computation and efficient filtering, Fourier analysis, modulation, and waveform processing. Within the product hierarchy, the ADSP-21567 is a SHARC+ DSP, a 64-bit fixed-point and floating-point processor within Analog Devices' digital signal processing family. The principal features include 1.152 MB of total internal SRAM, configurable 64-bit fixed-point or floating-point arithmetic, DDR memory connectivity, and operation from a 1.00 V core supply with 3.30 V I/O. This combination provides substantial on-chip working memory for filtering, FFT, communications, and control algorithms without requiring continuous external-memory access during each processing pass. At its 600 MHz device rating, the ADSP-21567BBCZ6 supports intensive parallel signal-processing tasks while retaining the programmability of the SHARC+ architecture. The DDR interface expands available data storage and facilitates DMA-based transfers, while the L1 and L2 memories help keep latency-sensitive loops on the processor. These characteristics are especially useful in systems that must acquire, filter, and transform large volumes of data in real time. Typical applications include professional audio and audio-visual processing, industrial vibration analysis, communications baseband processing, medical signal analysis, radar and sonar signal chains, and embedded control systems with high sample rates. The integration of DDR support and substantial internal SRAM makes the processor suitable for systems that cannot rely solely on slower external memory for real-time algorithm execution. Designers should pay close attention to the 400-ball BGA layout, multilayer PCB requirements, exposed thermal management, power sequencing, and high-speed memory routing. The manufacturer's Data Sheet Rev. D contains the authoritative pin assignment, package dimensions, electrical limits, clocking requirements, and memory-interface guidance required for a production design. This product overview consolidates the manufacturer's key processor, memory, package, and positioning details while adding practical implementation guidance for DDR routing, power delivery, thermal control, and software migration. It is intended to support early architecture selection, PCB planning, and qualification of the ADSP-21567BBCZ6 before final schematic and layout release.
ADSP-21567BBCZ8 - 800MHz SHARC+ DSP | Analog Devices
The Analog Devices ADSP-21567BBCZ8 is a single-core SHARC+ fixed/floating-point digital signal processor operating up to 800 MHz, with 640 KB of L1 memory, 512 KB of shared L2 SRAM, and DDR memory support in a 400-ball CSP_BGA package measuring 17 x 17 mm. The processor combines high-throughput real-time signal processing with programmable control, making it suitable for industrial instrumentation, communications, audio, and test systems. A SHARC+ DSP is a high-performance digital signal processor optimized for filtering, transforms, modulation, control, and other mathematically intensive operations. Within the product hierarchy, it belongs to the DSP class of programmable semiconductor ICs. Its architecture supports deterministic real-time processing while peripheral interfaces and DDR connectivity allow it to operate as the central processing element in larger embedded systems rather than as a standalone fixed-function accelerator. The ADSP-21567 family provides 640 KB of L1 memory, 512 KB of shared L2 SRAM, and an SHARC+ core capable of operation up to 800 MHz. Fixed- and floating-point processing supports algorithms that benefit from integer efficiency as well as dynamic range. DDR support extends available data storage beyond the integrated memories, while the 400-ball CSP_BGA package provides the necessary pin density for the processor, memory, power, clock, and high-speed peripheral connections. Analog Devices recommends the ADSP-21567 for new designs, indicating that the family remains relevant for new industrial, communications, and instrumentation platforms. Its programming model and peripheral architecture are particularly useful where deterministic execution, extensive signal-processing throughput, and a unified high-performance core are more important than minimum system cost. The processor therefore provides more flexibility than a fixed-function DSP while retaining the predictable performance expected from programmable signal-processing hardware. Typical applications include real-time audio and vibration analysis, industrial condition-monitoring equipment, communications baseband processing, professional test and measurement systems, and control platforms with substantial filtering or transform workloads. In these systems, the processor can execute sampling, windowing, frequency-domain conversion, filtering, and closed-loop control functions while external DDR retains sample histories or large working sets. PCB implementation must account for the 400-ball BGA footprint, controlled impedance requirements, clean power distribution, and the package’s demanding routing needs. The DDR interface and high-speed processor signals require careful stack-up selection, return-path continuity, and matched routing practices. Designers should use the pin-description and reference-design material in the Analog Devices ADSP-21567 Data Sheet, Rev. D, to assign balls, implement power planes, and verify signal integrity. This product page consolidates the verified processor specifications, package information, sourcing details, application guidance, and replacement constraints for ADSP-21567BBCZ8. It also identifies why package, memory, speed, and pin compatibility must all be checked before a different processor is treated as a board-level drop-in replacement.
ADSP-21567KBCZ6 - 600MHz SHARC+ DSP | Analog Devices
The Analog Devices ADSP-21567KBCZ6 is a single-core SHARC+ fixed- and floating-point digital signal processor rated at 600 MHz, with 640 KB of L1 memory, 512 KB of shared L2 SRAM, and a 400-ball CSP_BGA package measuring 17 x 17 mm. The processor also integrates DDR support for high-bandwidth external-memory workloads. Its combination of parallel signal-processing hardware, programmable peripherals, and deterministic DMA transfers makes it suitable for industrial, communications, audio, and embedded signal-processing systems. A digital signal processor is a specialized microprocessor architecture optimized for repeated numerical operations such as filtering, transforms, modulation, and waveform analysis. Within the embedded-computing hierarchy, the ADSP-21567KBCZ6 belongs to the SHARC+ processor family and provides substantially more parallel arithmetic resources than a general-purpose microcontroller while retaining programmable control and peripheral interfaces. This makes it useful when an application must combine real-time data movement with deterministic fixed- or floating-point computation. The ADSP-21567 family combines a 600 MHz SHARC+ processing core with hardware MAC acceleration, hardware FFT acceleration, circular-buffer support, zero-overhead loops, parallel data channels, and direct-memory-access transfers. Its 640 KB L1 memory supports fast access to working data and code, while the 512 KB shared L2 SRAM provides additional on-chip storage. Hardware acceleration for multiply-accumulate and FFT operations reduces the software overhead associated with common signal-processing kernels. The ADSP-21567KBCZ6 is identified for use with DDR memory and includes a high-speed peripheral interface plus secure storage and protection features. These characteristics distinguish it from simpler microcontrollers that lack large dedicated memory resources and parallel DSP accelerators. The 400-ball CSP_BGA package supports dense integration but requires careful PCB layout, controlled escape routing, and a thermal design capable of handling sustained processing activity. Typical applications include communications front ends, industrial audio and vibration analysis, professional audio decoding, radar and beamforming subsystems, and real-time control systems. In each case, the processor can move samples through DMA channels while the SHARC+ core performs filtering or transforms. Designers should also account for the external DDR interface, memory topology, clock requirements, and multilayer PCB construction when creating a production layout. A critical design consideration is power and thermal management. High-performance DSP execution can increase switching activity and junction temperature, especially when the core operates near its maximum clock rate. Validate the power budget across idle, typical, and worst-case processing scenarios, provide continuous power and ground planes, and route the exposed thermal-array connections according to the manufacturer's land pattern and design guidance. This product page combines the manufacturer's processor specifications with practical comparison, memory, package, thermal, and sourcing guidance. It distinguishes confirmed electrical facts from values that must be checked in the complete data sheet, helping engineers evaluate the ADSP-21567KBCZ6 before committing to a complex 400-ball BGA and DDR-based hardware design.
ADSP-21567KBCZ8 800MHz SHARC+ DSP 400-Ball BGA | Analog Devices
The Analog Devices ADSP-21567KBCZ8 is a fixed- and floating-point SHARC+ digital signal processor operating at up to 800 MHz, with 640 KB of L1 memory, 512 KB of shared L2 SRAM, and a 400-ball CSP_BGA package measuring 17 x 17 mm. It combines deterministic real-time signal processing with integrated DDR support for demanding audio, automotive, communications, and industrial workloads. A digital signal processor is a programmable semiconductor optimized to execute repetitive numerical operations with predictable latency. The SHARC+ architecture belongs to the DSP family, which sits within the broader semiconductor and embedded-processing hierarchy. Compared with a general-purpose processor executing every instruction sequentially, this DSP combines parallel arithmetic resources, dedicated memory paths, and a high-throughput floating- and fixed-point instruction set for filtering, transforms, modulation, and audio-processing workloads. The ADSP-21567 family reaches 800 MHz and provides 640 KB of L1 SRAM plus 512 KB of shared L2 SRAM. Its DDR interface expands access to external memory for larger working sets, while integrated system peripherals reduce the need for separate interface logic. The processor supports deterministic low-latency operation, making it suitable for automotive active noise reduction, acoustic echo cancellation, voice processing, audio zoning, industrial monitoring, and communications systems. Analog Devices describes the ADSP-2156x processors as highly deterministic, extremely low-latency platforms designed for real-time audio processing. The architecture is particularly relevant to applications requiring predictable response times, such as in-vehicle communication, engine-sound processing, road-noise cancellation, and speech enhancement. Its programmable signal-chain capabilities also support industrial vibration analysis, condition monitoring, and real-time acoustic measurement. The 400-ball CSP_BGA package supports high-density interconnect requirements needed for processor buses, memory interfaces, clocks, serial links, and peripheral connectivity. Such a package requires careful PCB layout, controlled impedance routing, adequate via and escape-routing density, and assembly processes capable of handling the ball pitch and pad geometry. The tray packaging designation shown for this ordering code must be considered when planning production logistics and PCB population. When designing a board around the ADSP-21567KBCZ8, treat the DDR interface as the dominant high-speed signal-integrity domain and follow the manufacturer layout guidance for length matching, layer transitions, reference planes, and power delivery. Confirm the exact DDR topology, device population rules, clock requirements, decoupling network, and exposed-pad requirements directly against the manufacturer datasheet and board-design documentation. This product page combines the manufacturer's family-level specifications with a package-aware compatibility assessment, practical PCB and integration guidance, and an explicit separation of verified technical facts from parameters that still require schematic or board-level confirmation. That engineering context helps buyers determine whether the processor fits the required memory, clock, interface, thermal, and lifecycle needs before committing to a layout.
ADSP-21569BBCZ8 - 800MHz SHARC+ DSP | Analog Devices
The Analog Devices ADSP-21569BBCZ8 is a single-core SHARC+ fixed/floating-point digital signal processor rated at 800 MHz, packaged in a 400-ball CSP BGA measuring 17 x 17 mm. The processor family can reach speeds of up to 1 GHz and incorporates DDR memory support, deterministic SIMD execution, and 640 KB of L1 memory. The ADSP-21569BBCZ8 combines dedicated signal-processing performance with the peripherals required for demanding audio, communications, and industrial control systems. A SHARC+ digital signal processor is a highly parallel processor architecture designed for real-time signal-processing workloads. It belongs to the SIMD digital signal processor category and, more broadly, the embedded semiconductor and processor hierarchies. Compared with a general-purpose CPU executing many sequential instructions, a SHARC+ processor uses single-instruction, multiple-data operations to apply one operation across multiple samples. This makes the ADSP-21569 family well suited to filtering, fast Fourier transforms, modulation, audio decoding, and beam-forming algorithms that require predictable execution. The ADSP-21569 family provides 640 KB of L1 SRAM and 1,024 KB of shared L2 SRAM. Its DDR interface supports high-bandwidth external-memory traffic, while its fixed/floating-point arithmetic supports both integer and floating-point algorithms. The processor also integrates communication and control peripherals identified for the family, including DDR, I2C, Link Port, QSPI, SPDIF, SPI, SPORT, and UART/USART interfaces. This peripheral integration reduces the need for discrete interface devices in complex embedded signal-processing designs. The single-core SHARC+ implementation provides a direct balance between computational throughput, memory capacity, and system complexity. At the 800 MHz grade represented by ADSP-21569BBCZ8, designers can evaluate real-time audio and signal-processing workloads without introducing a heterogeneous multiprocessor arrangement. The family’s shared L2 memory can support data-intensive algorithms, while its DDR interface allows larger working sets and frame buffers to remain in external memory. Exact memory bandwidth and cycle performance depend on the selected clock, memory configuration, and system implementation. Typical applications include automotive audio systems, consumer and professional audio processors, industrial vibration analysis, communication front ends, and embedded control systems that perform real-time filtering. Analog Devices specifically positions the ADSP-2156x family for immersive audio and sound experiences requiring deterministic, low-latency processing. The ADZS-21569-EZKIT evaluation platform supports evaluation and rapid prototyping across the ADSP-21562, ADSP-21563, ADSP-21565, ADSP-21566, ADSP-21567, and ADSP-21569 family members. The primary design consideration is the 400-ball BGA package, which requires careful PCB layout, multilayer construction, fine-pitch escape routing, and reliable power delivery. DDR routing must follow the manufacturer’s reference layout and impedance requirements, while decoupling should be distributed close to the relevant supply pins. Software and hardware design should also account for the exact temperature-grade, package, and ordering-code requirements before production release. This product overview consolidates the processor identity, package, memory, interface, and drop-in family options with practical design considerations and a parameter comparison. It also organizes sourcing, documentation, lifecycle, and replacement questions so engineers can move quickly from component selection to prototype validation.
ADSP-21571BSWZ-4 - 450MHz Dual-Core SHARC+ DSP | Analog Devices
The Analog Devices ADSP-21571BSWZ-4 is a 450 MHz dual-core SHARC+ digital signal processor in a 176-lead LQFP exposed-pad package measuring 24 x 24 mm. The processor combines two SHARC+ cores with fixed- and floating-point processing capability, providing high-throughput parallel signal processing for demanding audio, communications, and industrial control systems. Its 1.1 V operating supply information and -40°C to 85°C ambient-temperature rating identify it as a compact embedded DSP solution for temperature-controlled equipment. A digital signal processor is a specialized semiconductor architecture optimized for arithmetic operations on continuous streams of samples. Unlike a general-purpose microcontroller, which executes sequential control logic, a DSP uses parallel multiply-accumulate resources, dedicated memory paths, and hardware accelerators to complete filtering, Fourier analysis, modulation, and signal-conditioning workloads efficiently. The ADSP-21571 belongs to the SHARC family of SIMD processors, in which multiple data elements can be processed during the same instruction cycle. The ADSP-21571BSWZ-4 emphasizes parallel fixed- and floating-point computation at a 450 MHz clock. These characteristics suit audio codecs, digital receivers, speech processing, instrumentation, and real-time control loops that require deterministic numerical throughput. Its exposed thermal pad supports improved heat transfer from the processor to the PCB, while the 176-pin surface-mount package exposes the device's parallel external interfaces and dedicated peripheral resources. Analog Devices groups the ADSP-21571 with its SHARC+ processor portfolio, whose architecture emphasizes SIMD execution and efficient handling of real-time signal data. Designers should map each peripheral, clock, reset, and communication signal to the manufacturer pin-description table before laying out a board. Supply rails require the decoupling network specified in the manufacturer datasheet, especially around the exposed-pad thermal and electrical requirements. Typical applications include professional audio decoding, bidirectional communications, industrial vibration analysis, and embedded control systems. In an audio system, the processor can perform sample-rate conversion, filtering, mixing, and dynamic-range processing. In communications equipment, its parallel architecture supports modulation, demodulation, and spectral analysis. In instrumentation, it can accelerate FFT-based measurement and real-time filtering. The main design trade-off is package size and pin complexity: a 24 x 24 mm LQFP requires careful escape routing, and the exposed pad must be connected to the appropriate power and thermal planes. This page combines the manufacturer product information with distributor packaging records, drop-in family alternatives, parameter comparisons, and practical PCB guidance to support component selection and board planning.
ADSP-21571BSWZ-5 - 500MHz SHARC+ DSP | Analog Devices
The Analog Devices ADSP-21571BSWZ-5 is a 500 MHz fixed-point and floating-point digital signal processor built on the SHARC+ architecture, with two processing cores, 800 MIPS of processing performance, and 176 LQFP-EP pins in a 24 x 24 mm package. The processor supports 32-bit, 40-bit, and 64-bit data operation and is designed for demanding real-time signal-processing workloads. A digital signal processor is a semiconductor optimized to execute repetitive mathematical operations efficiently. In the hierarchy of electronic components, the ADSP-21571 belongs to the digital signal processor class, then the processor and embedded-computing category, and ultimately the integrated-circuit and semiconductor markets. Its SIMD SHARC architecture supports parallel arithmetic and is especially useful when an application must process continuous streams of audio, control, communications, or sensor data with deterministic timing. Key features include a 500 MHz maximum clock, two SHARC+ cores, 800 MIPS peak performance, fixed-point and floating-point arithmetic, 176 terminals, and an exposed thermal-pad LQFP package. The manufacturer identifies this member of the ADSP-21571 family as combining SHARC+ processing capability with an ARM Cortex-A5 core. This heterogeneous architecture can divide intensive DSP filtering tasks from control, communications, or operating-system functions, although software partitioning must be planned carefully. The device provides 32-bit, 40-bit, and 64-bit processing formats according to distributor technical data. Its Super Harvard Architecture supports SIMD operation, while the integrated ARM Cortex-A5 expands general-purpose control capability beyond a conventional DSP-only processor. The 176-pin exposed-pad package provides numerous signal connections and a dedicated thermal path, making it more suitable than a small leadless package for designs requiring extensive external memory, clocking, and peripheral connectivity. Typical applications include industrial audio processing, communications infrastructure, precision instrumentation, real-time control, embedded media processing, and high-performance sensor-analysis systems. The two SHARC+ cores are useful when workloads can be parallelized, while the Cortex-A5 supports control-plane tasks and common embedded software. Firmware must account for clock configuration, memory-map placement, interrupt routing, DMA behavior, and synchronization between processor domains. PCB implementation should preserve the exposed-pad thermal path with a soldered land pattern, adequate copper, and via arrays. Decoupling should follow the manufacturer's power-supply and pin-description tables, and high-speed clock and memory routing requires short, impedance-controlled paths with return-plane continuity. Use the manufacturer datasheet for the exact pin assignments, voltage rails, decoupling values, and exposed-pad connection requirements. This product record combines the exact orderable MPN, verified technical summaries, lifecycle information, source links, drop-in candidate analysis, and implementation guidance. It is intended to accelerate engineering review while keeping package-level replacement decisions distinct from broader functional similarities.
ADSP-21571CSWZ-4 - 450MHz Dual-Core SHARC+ DSP | ADI
Analog Devices ADSP-21571CSWZ-4 is a fixed-point and floating-point digital signal processor featuring two SHARC+ cores, a 450 MHz clock, and a 176-pin LQFP exposed-pad package measuring 24 x 24 mm. It combines SIMD signal-processing performance with the Super Harvard Architecture for demanding real-time control, filtering, and communications workloads. A digital signal processor is a specialized semiconductor that executes mathematical operations in parallel using a SIMD architecture. The ADSP-21571 belongs to the SHARC+ processor family, which combines two high-performance signal-processing cores with dedicated peripherals for demanding industrial, communications, audio, and control applications. Its architecture is designed to reduce instruction overhead in filter, FFT, modulation, and other data-intensive algorithms. Principal features include two SHARC+ cores operating at 450 MHz, support for fixed-point and floating-point arithmetic, and integration in a 176-LQFP-EP package. The processor is identified as part of the ADSP-SC571-class family, while the Analog Devices product page also describes the closely related ADSP-SC573 architecture as combining SHARC+ processing with an Arm Cortex-A5 core. Detailed core-count, memory, interface, voltage, and thermal parameters should be confirmed against the appropriate manufacturer documentation for the exact device variant. The dual-core SIMD organization is the key architectural advantage. Workloads that can be partitioned across both SHARC+ cores can achieve greater throughput than a single-core implementation, while parallel data paths are well suited to real-time filtering and spectral analysis. Software design must still account for synchronization, inter-core communication, and deterministic execution requirements when splitting a signal-processing chain. Typical uses include industrial motor and motion control, professional audio and communications processing, test and measurement instrumentation, embedded communications infrastructure, and real-time signal analysis. The 450 MHz operating point supports computationally intensive algorithms while the exposed-pad package provides a direct path for board-level heat dissipation. For a robust PCB design, provide clean power rails, continuous ground-plane return paths, and thermal copper beneath the exposed pad. Confirm every power, decoupling, clock, and signal requirement against the manufacturer datasheet and reference design; a 176-pin mixed-signal processor requires careful high-speed routing and comprehensive layout review before production release. This product overview consolidates the confirmed processor identity, package format, core architecture, and clock rate with practical guidance for PCB layout, thermal management, firmware architecture, and replacement planning.
ADSP-21571CSWZ-5 - 500MHz Dual SHARC+ DSP | ADI
Analog Devices ADSP-21571CSWZ-5 is a 500 MHz fixed/floating-point digital signal processor built around two SHARC+ cores, with a 176-lead LQFP exposed-pad package measuring 24 mm by 24 mm. The processor operates from a 1.15 V core supply and supports 3.30 V I/O, combining parallel SIMD signal-processing performance with embedded control capability. A digital signal processor is a semiconductor optimized for arithmetic-intensive operations on continuously sampled or streamed data. In the product hierarchy, a DSP belongs to the processor family alongside microcontrollers and FPGAs, but its architecture emphasizes deterministic real-time arithmetic, parallel data paths, and dedicated memory organization. The SHARC+ architecture used by the ADSP-21571 family supports fixed-point and floating-point processing, making it suitable for communications, audio, industrial-control, and embedded signal-processing systems. Three headline characteristics define this device: a 500 MHz clock rating, two SHARC+ DSP cores, and a 176-LQFP exposed-pad package. The processor's fixed/floating-point arithmetic supports both integer and floating-point algorithms. Its dual-core organization can distribute independent processing tasks or support coordinated workloads when the firmware, memory system, and interrupt architecture are configured appropriately. Analog Devices positions the ADSP-21571 within its SHARC+ processor portfolio and relates the device to the ADSP-SC573 architecture, which combines dual-core SHARC+ processing with an Arm Cortex-A5 control processor. This heterogeneous processing approach can separate real-time DSP workloads from higher-level control functions, reducing the need for an additional controller in connected embedded systems. Exact peripheral availability, memory organization, clocking, and thermal limits must be confirmed against the manufacturer datasheet for the selected orderable variant. Typical engineering uses include real-time audio processing, communications signal chains, industrial motor and vibration analysis, test-and-measurement front ends, and embedded control with dedicated DSP acceleration. The 500 MHz SHARC+ cores are particularly relevant when an algorithm requires sustained SIMD arithmetic, predictable interrupt response, or deterministic execution under a controlled firmware environment. PCB implementation should preserve the exposed-pad thermal and electrical requirements of the 176-LQFP package. Place the decoupling network close to the supply pins, route high-speed interfaces according to the manufacturer's reference layout, and provide a continuous ground reference beneath the exposed pad. Thermal design and power-rail sequencing should be validated at the highest expected operating temperature rather than inferred from nominal clock frequency alone. This page organizes the confirmed processor, package, power, and application information into a design-oriented resource. It also distinguishes direct family alternatives from processors that require a new board design, helping engineers compare clock rate, package compatibility, processor architecture, and procurement constraints before committing to a hardware platform.
ADSP-21571KSWZ-4 450MHz Dual SHARC DSP | Analog Devices
The Analog Devices ADSP-21571KSWZ-4 is a 450 MHz dual-core SHARC digital signal processor in a 176-LQFP-EP, 24 x 24 mm package. The device combines two SHARC+ cores with an Arm Cortex-A5 core, supporting fixed-point and floating-point signal processing for demanding embedded applications. Its operating temperature grade is identified by the KSWZ-4 ordering code. A digital signal processor, or DSP, is a semiconductor optimized for filtering, transforms, modulation, control, and other mathematically intensive operations. The ADSP-21571 belongs to the SHARC family and combines parallel-oriented real-time processing with a higher-level Arm control environment. This architecture sits between general-purpose microcontrollers and dedicated fixed-function signal-processing hardware, allowing complex algorithms to execute with predictable performance. Key features include two SHARC+ cores operating at up to 450 MHz, an Arm Cortex-A5 core, fixed-point and floating-point arithmetic, and an exposed-pad LQFP package. The 176-pin package supports a broad mix of high-speed digital interfaces, external memory connectivity, clocking, serial communications, and general-purpose I/O. The exposed thermal pad improves heat transfer when the board provides suitable copper area. The processor architecture is suited to applications that require parallel data movement together with control-plane software. Its dual SHARC+ cores can divide computationally intensive signal chains, while the Cortex-A5 core can manage operating-system-level tasks, configuration, communications, and supervisory logic. This division of labor can improve system organization compared with using a single core for every function. Typical applications include professional audio and music processing, industrial machine control, communications infrastructure, radar and signal-processing subsystems, medical instrumentation, and embedded test equipment. The same-package ADSP-21571 ordering variants allow designers to select different temperature grades while retaining a common board footprint. Board design should provide the exposed pad with an uninterrupted thermal copper area and connect it to the appropriate ground reference specified by the manufacturer. Decoupling networks, high-speed routing, clock integrity, and memory-interface layout require careful implementation because processor performance depends on clean, deterministic signal paths. This product page combines manufacturer-family information, package and frequency details, drop-in ordering alternatives, comparison parameters, and practical design guidance. It is intended to help engineers identify the correct grade, verify footprint compatibility, and plan the thermal and routing work required for a reliable embedded DSP design.
ADSP-21571KSWZ-5 - 500MHz Dual SHARC+ DSP | Analog Devices
The Analog Devices ADSP-21571KSWZ-5 is a fixed-point and floating-point digital signal processor built around dual 500 MHz SHARC+ cores and packaged in a 176-lead LQFP exposed-pad package measuring 24 x 24 mm. It combines high-throughput parallel signal processing with a 3.30 V I/O rail and a 1.15 V core rail, making it suitable for demanding embedded control, communications, audio, and industrial signal-processing systems. A SHARC+ digital signal processor is a SIMD processor in the SHARC family of DSPs. It uses Analog Devices Super Harvard Architecture to execute multiple arithmetic operations in parallel. The ADSP-21571 extends that DSP-oriented architecture with dual processing cores, 768 KB of L1 cache, and 1 MB of shared L2 cache according to the manufacturer product materials and CAD resource description. Its processing resources are intended for continuous real-time workloads where deterministic execution, parallel arithmetic, and dedicated accelerator blocks are more important than general-purpose software flexibility. The processor operates at 500 MHz and is identified as a dual-SHARC device with support for fixed-point and floating-point arithmetic. Its 3.30 V I/O voltage facilitates integration with external logic and system interfaces, while the 1.15 V core voltage supports energy-efficient internal computation. The 176-LQFP-EP package provides a large, routed pin count together with an exposed thermal pad, supporting high-speed external memory and peripheral connectivity without relying on a very dense ball-grid package. The SHARC+ architecture provides a deterministic, high-throughput execution model designed for signal-processing pipelines. Parallel datapaths can accelerate filtering, transform, modulation, demodulation, and fixed-point numerical workloads, while the shared L2 memory can hold data shared between the two cores. The 768 KB L1 and 1 MB shared L2 figures distinguish this processor from general-purpose microcontrollers and make it better aligned with real-time DSP workloads than a comparable low-cost MCU. Typical applications include professional audio and music processing, communications infrastructure, industrial control, radar and signal-analysis equipment, and embedded systems requiring high-throughput fixed-point or floating-point computation. In these systems, the processor can divide filtering or transform workloads across its two cores, coordinate shared data through L2 memory, and maintain predictable timing for real-time data paths. Thermal design is essential because the 176-lead exposed-pad package must transfer heat from the processor into the PCB. Follow the manufacturer's recommended land pattern, provide continuous copper beneath the exposed pad, use the specified via array, and apply appropriate thermal via and copper treatment. Keep high-current and high-speed routing away from sensitive analog or reference sections where practical. This page combines manufacturer architecture information, package details, compatibility-oriented family comparisons, and practical implementation guidance. It also distinguishes confirmed operating facts from parameters that must be confirmed in the full datasheet before schematic release, qualification, or production procurement.
ADSP-21573BBCZ-4 - 450MHz Dual-Core SHARC+ DSP | Analog Devices
Analog Devices ADSP-21573BBCZ-4 is a 450 MHz fixed/floating-point digital signal processor based on the SHARC+ dual-core architecture with an Arm Cortex-A5 core. The device provides multi-core cooperative processing, parallel data channels, circular buffer support, zero-overhead loops, DMA data transfer, high-speed peripheral interfaces, integrated ADC interfaces, secure storage, and real-time clock and timer resources. It is packaged in a 400-CSPBGA, 17 x 17 mm surface-mount package. The ADSP-21573 family belongs to the ADSP-SC57x and ADSP-2157x SHARC processor family, combining real-time signal-processing performance with an embedded Arm control environment. Its SIMD SHARC+ architecture is designed for deterministic, high-throughput processing in communications, industrial control, audio, instrumentation, and embedded signal-processing systems. The 450 MHz processor clock supports parallel execution of multiple real-time processing tasks. Integrated system features include DDR support, DMA data movement, secure storage and protection, and high-speed peripheral connectivity. The integrated ADC interface allows efficient acquisition from analog front ends without requiring a separate processor for basic control. The Arm Cortex-A5 core supports higher-level control tasks, networking, and operating-system-oriented software while the SHARC+ cores handle deterministic signal-processing workloads. Typical deployments place the processor in communications infrastructure, industrial automation, professional audio, test and measurement, and embedded control systems. The same DSP architecture can serve as an audio accelerator, communications baseband processor, or real-time data-analysis engine. The multi-core arrangement is especially useful when control functions and sample-processing loops must run concurrently without relying on separate silicon. When designing a board around this processor, follow the manufacturer pin-description and land-pattern guidance exactly. Pay particular attention to power rails, DDR routing, high-speed peripheral connections, exposed-pad or thermal requirements, and BGA assembly process constraints. The manufacturer datasheet remains the authoritative source for pin assignment, voltage limits, clocking, and initialization procedures. This product page combines manufacturer and distributor technical information with practical design guidance, package-level comparison data, and application-oriented engineering context. It helps engineers identify whether the ADSP-21573BBCZ-4 fits a real-time embedded design and how closely related ADI SHARC-family processors compare in package, clocking, and integration.
ADSP-21573BBCZ-5 - 500MHz Dual SHARC DSP | Analog Devices
Analog Devices ADSP-21573BBCZ-5 is a dual-core SHARC digital signal processor operating at 500 MHz, with integrated DDR memory support and a 400-CSPBGA package measuring 17 x 17 mm. The device targets demanding fixed- and floating-point signal-processing workloads requiring two SHARC cores, high-speed local memory, and a compact high-pin-count BGA implementation. A digital signal processor, or DSP, is a specialized microprocessor architecture optimized for mathematically intensive operations such as filtering, FFT processing, modulation, and real-time data conversion. The ADSP-2157x family belongs to the SHARC product hierarchy: DSP > real-time signal processor > SHARC processor > semiconductor. Its dual-core architecture can support parallelizable processing while the DDR interface provides access to external high-speed memory. The ADSP-21573BBCZ-5 combines two SHARC processor cores with a 500 MHz clock and DDR memory capability. The 400-CSPBGA package provides 400 connection positions for power, ground, high-speed interfaces, memory connections, and control signals. The listed industrial temperature range is -40°C to 85°C, and the device operates from a 1.15 V supply. Its fixed- and floating-point processing capability makes it suitable for embedded signal-processing platforms rather than general-purpose control applications. The BGA package makes board-level electrical and thermal performance especially important. A 400-ball design generally demands careful escape-routing, layer-transition, and power-distribution planning because signal escape, via current, and return-path continuity all affect signal integrity. The ADSP-21573BBCZ-5 should therefore be evaluated with its complete reference design, including DDR layout, decoupling strategy, clock implementation, and exposed thermal-management requirements. Typical applications include professional audio processing, communications and modem signal chains, industrial measurement, radar or sonar data processing, and embedded test equipment. In each case, the two SHARC cores can divide suitable workloads between parallel channels, while DDR support accommodates larger working data sets than would be practical with internal memory alone. The exact peripheral configuration and software support must be confirmed against the manufacturer datasheet for the assigned board revision. When planning a design, verify the complete pin assignment, power rails, clock requirements, and memory topology in the Analog Devices documentation. The processor’s 500 MHz operating rate and DDR interfaces can expose routing, jitter, and power-integrity problems that are difficult to diagnose in prototype hardware. Preserve the reference-design stack-up and land pattern whenever possible. This page consolidates the verified product identity, package information, current sourcing route, interface selection guidance, and practical integration considerations for engineers comparing ADSP-21573BBCZ-5 with other SHARC-based implementations.
ADSP-21573CBCZ-5 - 500 MHz Dual-Core SHARC DSP | ADI
The Analog Devices ADSP-21573CBCZ-5 is a dual-core SHARC digital signal processor rated at 500 MHz, with fixed-point and floating-point arithmetic, DDR memory support, and a 1.15 V operating voltage in a 400-CSPBGA package measuring 17 x 17 mm. It is intended for demanding real-time signal-processing systems that require deterministic computation, high-speed serial interfaces, and deterministic control over memory access. A digital signal processor, or DSP, is a specialized semiconductor optimized for arithmetic operations on continuously arriving data. Its internal architecture reduces the burden placed on a general-purpose processor by supporting parallel computation, efficient loop execution, and dedicated data paths for filtering, modulation, transforms, and other signal-processing workloads. The ADSP-21573 belongs to the SHARC processor family and combines two processing elements in one device. The processor's headline characteristics include two SHARC cores, a 500 MHz clock rating, and support for DDR memory. Fixed-point and floating-point processing provide flexibility across control, communications, audio, and measurement workloads. The 1.15 V supply requirement supports compact high-performance embedded systems, although board-level power planning must account for processor, memory, and I/O power together. The commercial temperature rating of -40°C to 95°C permits operation across industrial and extended-temperature environments. The ADSP-2157x processor architecture is designed around high-throughput signal processing rather than general-purpose operating-system workloads. DDR support can provide greater storage bandwidth for sample buffers, trace data, and complex working sets than a small on-chip buffer alone. Four SPORT channels are identified for the processor family in manufacturer technical material, supporting efficient serial transfer of sampled and processed data. Exact peripheral routing, voltage groups, and signal requirements should be taken from the manufacturer pin-description tables. Typical uses include real-time audio processing, communications and modem functions, vibration analysis, industrial control, instrumentation, and embedded signal-processing modules. In these systems, the two SHARC cores can divide concurrent processing tasks, while DDR memory accommodates larger data sets. The 400-CSPBGA footprint also demands careful PCB layout because high-speed routing, numerous ground connections, and a large thermal pad require controlled impedance and return paths. Designers should pay particular attention to power sequencing, decoupling, DDR routing, and exposed-pad thermal management. Because this is a 400-ball BGA device, accurate land patterns, via placement, and assembly-process compatibility should be verified against the manufacturer's package drawing before fabrication. The pinout and full ball assignment cannot be safely reconstructed from catalog summaries. This product page combines manufacturer identification, package information, operating limits, sourcing guidance, and engineering-oriented design considerations. It also distinguishes confirmed device attributes from details that still require the complete Analog Devices data sheet and hardware design guide.
ADSP-21573KBCZ-4 - 450MHz Dual-Core SHARC+ DSP | ADI
The Analog Devices ADSP-21573KBCZ-4 is a 450 MHz, 32-bit fixed/floating-point digital signal processor with two SHARC+ cores, an Arm Cortex-A5 core, and 720 MIPS processing performance. The processor is packaged in a 400-CSPBGA package measuring 17 x 17 mm. It also includes DDR memory support and a broad collection of serial, network, storage, and control interfaces. A digital signal processor is a semiconductor designed to execute mathematically intensive operations efficiently and deterministically. In the product hierarchy, the ADSP-21573KBCZ-4 is a DSP within the SHARC processor family. Its SIMD SHARC+ architecture combines two specialized signal-processing cores with an Arm Cortex-A5 control core, allowing real-time signal processing and embedded control functions to share one package. Key features include two SHARC+ processing cores, 450 MHz operating frequency, 720 MIPS performance, and 32-bit fixed- and floating-point arithmetic. DDR memory support addresses bandwidth-intensive data movement. The listed interfaces include CAN, Ethernet, EBI/EMI, DAI, I2C, MMC/SD/SDIO, SPI, SPORT, UART/USART, and USB OTG, giving the processor broad connectivity for industrial, communications, audio, and embedded-control systems. The architecture separates high-throughput DSP work from general-purpose control. The dual SHARC+ cores are suited to filtering, fast Fourier transforms, signal analysis, and other SIMD operations, while the Cortex-A5 core can manage operating-system tasks, communications, and system control. The processor’s DDR interface supports direct access to external memory for large working sets, while the integrated interface set reduces the need for discrete peripheral controllers in connected embedded systems. Typical applications include industrial control, professional audio, communications infrastructure, test and measurement equipment, and real-time embedded signal-processing systems. Its combination of dual SHARC+ cores and Cortex-A5 control processing is particularly useful when a design must perform demanding DSP calculations while also handling networking, configuration, and supervisory functions. A critical design consideration is the complexity of a 400-ball BGA package and its high-speed memory and serial interfaces. The PCB must use an assembly process qualified for the component pitch, and power, ground, clock, and high-speed routing must follow the manufacturer’s reference layout. Differential clocks and DDR routing require continuous return-path planning and controlled impedance. This product page consolidates the exact orderable MPN, package and interface details, suffix-specific replacement options, parameter comparisons, and practical PCB guidance. It also distinguishes processor ordering options that share a compatible package from alternatives requiring a different footprint.
ADSP-21573KBCZ-5 - 500MHz Dual SHARC DSP | Analog Devices
The Analog Devices ADSP-21573KBCZ-5 is a 500 MHz fixed-point and floating-point digital signal processor based on the SHARC architecture. The device features two SHARC processing cores, integrated DDR memory support, and a 400-ball CSP BGA package measuring 17 mm by 17 mm. It is intended for demanding signal-processing workloads that require high-throughput parallel arithmetic and deterministic real-time control. A digital signal processor is a specialized semiconductor that executes convolution, filtering, Fourier-transform, modulation, and other mathematical operations efficiently. A SHARC processor combines multiple parallel computational elements with specialized I/O and memory interfaces, placing it in the DSP hierarchy beneath real-time processors and semiconductor integrated circuits. Compared with a general-purpose microcontroller, this architecture emphasizes repeatable sample processing, predictable interrupt behavior, and high data throughput. The ADSP-21573KBCZ-5 provides a 500 MHz processor clock, two SHARC cores, fixed-point and floating-point arithmetic, and DDR memory capability. These features suit applications involving multiple channels of real-time audio, control, communications, or measurement data. Its dual-core organization allows related workloads to be distributed across two SHARC processing engines while preserving the architectural benefits of the SHARC instruction set and peripheral interface family. The ADSP-21573 belongs to the ADSP-SC57x and ADSP-2157x processor grouping. Within that family, the ADSP-2157x devices provide SHARC processing resources without the additional Arm Cortex-A5 core associated with the broader SC57x grouping. This distinction is important when partitioning software, selecting peripherals, and establishing a board support package for an embedded audio or industrial signal-processing platform. Typical uses include multichannel audio decoding, motor and motion control, communications front ends, vibration analysis, and instrumentation. In these systems, the processor can execute iterative numerical algorithms close to the source data while DDR memory supports larger sample buffers. The fixed-point capability is useful for efficient integer-domain processing, while floating-point arithmetic supports dynamic-range-sensitive algorithms and easier development of general numerical code. Board design requires careful attention to the 400-ball CSP BGA escape routing, DDR layout, decoupling, clocking, and power delivery. Use the manufacturer pin-description and memory-interface tables when assigning BGA balls, and preserve the published decoupling and via requirements around the processor and DDR interface. The 17 mm by 17 mm package also requires assembly and inspection processes capable of handling fine-pitch, high-ball-count BGA construction. This product page consolidates the confirmed processor, package, arithmetic, temperature, and sourcing information with practical design guidance. It distinguishes the ADSP-21573 from the ADSP-SC573 family and emphasizes the device's strongest engineering attributes: dual SHARC cores, 500 MHz operation, DDR support, and a compact 400-ball BGA implementation.
ADSP-2171BS-104 - 16-Bit DSP Microcomputer | Analog Devices
The Analog Devices ADSP-2171BS-104 is a single-chip 16-bit digital signal processor microcomputer optimized for high-speed numeric processing, with a 33 Mips instruction rate, two serial ports, and a host port in a 128-pin TQFP package. It is designed for embedded signal-processing systems that require deterministic execution, efficient arithmetic, and dedicated serial and host interfaces. A digital signal processor, or DSP, is a specialized microprocessor architecture designed to execute filtering, correlation, Fourier analysis, modulation, and other mathematically intensive tasks efficiently. The ADSP-2171 belongs to the broader embedded processor and semiconductor hierarchy, combining a program sequencer, program and data memory systems, address generators, flags, serial interfaces, and host-port logic on one integrated circuit. Its 16-bit DSP architecture and 30 ns instruction cycle time support real-time numeric workloads. The ADSP-2171 family is manufactured using a high-speed, double-metal, low-power CMOS process. The ADSP-2171BS-104 includes program ROM and program RAM resources, external address and data buses, two serial ports, and a host interface. These resources allow the processor to serve as the central controller in communications, industrial control, audio, instrumentation, and embedded DSP systems where both control logic and high-speed arithmetic are required. The 128-pin TQFP package provides the external bus, serial interface, host interface, clock, power, and control signals required by the ADSP-2171 architecture. The suffix BS-104 identifies the specific package, temperature, and ordering configuration used by this device. Confirm the exact ordering code and environmental limits against the Analog Devices ADSP-2171 product documentation before releasing a production BOM. Typical applications include modem and communications control, audio and speech processing, industrial measurement, instrumentation, and real-time control loops. The DSP architecture is useful when an application repeatedly executes filtering, mixing, or numeric transformations rather than general-purpose operating-system code. The external memory and host interfaces also allow the processor to operate with additional peripheral or storage resources. When designing a circuit around the ADSP-2171BS-104, follow the manufacturer’s pin description and recommended decoupling requirements in the datasheet. Place power and ground connections directly to the relevant pins, route high-current paths with low loop area, and keep sensitive clock and data traces away from switching nodes. Validate signal timing, address decoding, serial-port configuration, and external memory behavior on the final board. This page consolidates the device’s core identity, package information, practical application context, sourcing guidance, and engineering considerations. It is intended to help designers determine whether the ADSP-2171BS-104 fits a new DSP design and to identify the technical points that require confirmation from the manufacturer documentation.
ADSP-2171BS-133 16-Bit 33 MIPS DSP | Analog Devices
The Analog Devices ADSP-2171BS-133 is a 16-bit digital signal processor and single-chip microcomputer optimized for high-speed numeric processing. It operates from a 5 V supply, supports instruction-cycle times down to 30 ns, and is identified in the ADSP-217x family as a 33 MIPS device when operated from a 16.67 MHz clock. The device is packaged in a 128-pin PQFP/TQFP plastic package and includes two serial ports and a host port. Its architecture combines program memory, program RAM, an external address bus, a 24-bit external data bus, address generators, flags, and power-down control logic. A digital signal processor, or DSP, is a microprocessor architecture optimized for repetitive numerical operations such as filtering, modulation, transform, and waveform calculations. The ADSP-2171 belongs to the broader embedded processor hierarchy, where DSP instructions execute directly on sampled or generated data. Compared with a general-purpose microcontroller, this DSP is intended to reduce the overhead of high-volume arithmetic and to simplify real-time signal-processing implementations. The principal operating characteristics are its 16-bit fixed-point architecture, 33 MIPS execution rate, 5 V supply, two serial ports, host port, and 24-bit external data bus. According to the ADSP-2171/ADSP-2172/ADSP-2173 datasheet, every instruction can execute in a single processor cycle. The 30 ns instruction-cycle specification corresponds to a 33.33 MHz instruction rate, while the listed maximum clock frequency is 16.67 MHz. These figures must be understood together: the processor architecture can complete an instruction every 30 ns under its specified operating conditions. The ADSP-2171 is fabricated using a high-speed, double-metal, low-power CMOS process. Program storage, program RAM, serial interfaces, host-interface logic, and external memory addressing are integrated on one device, allowing a compact implementation of a dedicated signal-processing subsystem. The family is offered in 128-pin TQFP and PQFP packages. The -133 ordering code denotes the 16.67 MHz grade, while the BS portion identifies the package configuration used by this part. Typical applications include industrial control, communications, audio and waveform processing, instrumentation, and embedded systems requiring deterministic numeric computation. The two serial ports can support peripheral or host data movement, while the host port provides an additional mechanism for communicating with a host processor. The 24-bit external data bus allows access to external data and program storage when internal memory is insufficient. For new designs, use the manufacturer pin-description table and package drawing to assign every signal, especially supply, ground, clock, reset, and serial-interface connections. Confirm the complete memory map, external-memory timing, and pin multiplexing in the ADSP-217x hardware reference material before finalizing the PCB. The operating temperature grade, qualification status, lifecycle state, and exact decoupling requirements should also be confirmed for the production configuration. This page consolidates the key ADSP-2171BS-133 electrical, package, interface, and application information with a focused comparison of the closest documented family members. It also identifies practical design checks and sourcing questions that are often distributed across product listings, datasheets, and cross-reference results, helping engineers evaluate the processor before beginning schematic or PCB work.
ADSP-2171KS-104 - 16-Bit 26MHz DSP | Analog Devices
Analog Devices ADSP-2171KS-104 is a 16-bit fixed-point digital signal processor microcomputer optimized for high-speed numeric processing, with a 26 MHz clock, 26 MIPS performance rating, and a 128-pin PQFP package measuring 28 mm by 28 mm. The device is designed for 5.0 V applications and includes two serial ports and a host port. A digital signal processor is a semiconductor designed to execute mathematical operations on sampled data efficiently. Unlike a general-purpose microprocessor, a DSP architecture emphasizes predictable execution, multiply-accumulate operations, data movement, and control of real-time signal-processing workloads. The ADSP-2171 family is positioned as a single-chip DSP microcomputer for applications requiring fast fixed-point computation and dedicated external interfaces. Key features include a 16-bit fixed-point processing architecture, 26 MHz operating frequency, and a listed 26 MIPS rating. The ADSP-217x family is manufactured in a high-speed, double-metal, low-power CMOS process, with a 30 ns instruction cycle time. The 128-pin PQFP package provides a high pin count for external memory, address, data, serial, host, and control connectivity. The ADSP-2171KS-104 is suited to communications, industrial control, audio, instrumentation, and embedded signal-processing systems where deterministic numeric processing is more important than general-purpose computing. Its two serial ports and host port support peripheral connectivity, while the 16-bit architecture is appropriate for fixed-point algorithms, filtering, modulation, decoding, and control-loop implementations. When designing around this processor, verify the complete electrical, timing, pin, memory, and clock requirements against the manufacturer datasheet before finalizing the PCB. Pay particular attention to 5 V supply sequencing, external memory interfaces, clock routing, and decoupling. The 128-pin PQFP footprint also requires adequate board area and careful signal routing around the dense perimeter pads. This product page organizes the verified ADSP-2171KS-104 identity, package information, interface details, application fit, design considerations, and qualification questions for engineers evaluating the DSP in new or legacy signal-processing equipment.
ADSP-2171KS-133 - 16.67 MHz 24-Bit DSP | Analog Devices
The Analog Devices ADSP-2171KS-133 is a single-chip digital signal processor optimized for high-speed numeric processing, featuring a 24-bit architecture, a 16.67 MHz clock rating, and a 128-pin PQFP package. Designed for 5.0 V applications, it combines programmable digital signal processing with dedicated arithmetic resources for demanding embedded signal-processing workloads. A digital signal processor, or DSP, is a specialized microprocessor architecture designed to execute filtering, Fourier analysis, modulation, waveform generation, and other numerical operations efficiently. DSP processors extend the general-purpose embedded-processor hierarchy into a signal-processing IC optimized for predictable execution of mathematically intensive algorithms. The ADSP-2171 family is positioned for industrial, communications, audio, control, and instrumentation applications where dedicated numeric processing provides greater throughput than general-purpose software alone. The ADSP-2171KS-133 uses a 24-bit data architecture and is rated at 16.67 MHz for the specified ordering suffix. According to the Analog Devices manufacturer datasheet, the ADSP-2171 and ADSP-2172 are designed for 5.0 V applications, while the ADSP-2173 is a 3.3 V family member. The related ADSP-2172 also includes 8K words of 24-bit program ROM, distinguishing it from the ADSP-2171 in internal program-memory configuration. The device is manufactured using a high-speed, double-metal, low-power CMOS process and executes instructions with a 30 ns instruction-cycle time. This architecture makes the ADSP-2171 suitable for real-time numerical workloads that require deterministic data movement and high-throughput multiply-accumulate operations. Its 128-pin package supports the external data, address, control, memory, and peripheral interfaces required by a standalone DSP system. Typical applications include communications filtering, motor and motion control, industrial signal acquisition, audio signal processing, instrumentation, and embedded control systems. A designer evaluating this processor should account for its 5.0 V supply requirement, external memory and bus implementation, clocking architecture, and the software-development environment used to create DSP applications. A key design consideration is the distinction between the ADSP-2171 and ADSP-2172. Although both target 5.0 V systems and use related 128-pin packages, the ADSP-2172 adds 8K words of 24-bit program ROM. If firmware must reside entirely in on-chip ROM, the ADSP-2172 may be more appropriate; if the ADSP-2171's memory configuration satisfies the design, its established processor architecture may offer a simpler fit. This product data combines the manufacturer's family-level architecture details with exact ordering information for the ADSP-2171KS-133, including its 24-bit architecture, 16.67 MHz rating, and 128-pin PQFP package. It also provides application-focused design guidance and explicitly separates the ADSP-2171 from related but not automatically interchangeable family members.