بەرهەمەکان (8,400+)

A3P060-2TQG144I - ProASIC3 FPGA 60K Gates 144-TQFP | Microchip
A3P060-2TQG144I

A3P060-2TQG144I - ProASIC3 FPGA 60K Gates 144-TQFP | Microchip

The Microchip Technology (Microsemi) A3P060-2TQG144I is a ProASIC3 family flash-based field programmable gate array (FPGA) delivering 60,000 gates of programmable logic, a system performance of up to 310 MHz, and 91 user I/O in a 144-pin TQFP surface-mount package. Built on a 130 nm flash process with a 1.5 V core supply, it is a single-chip, non-volatile FPGA that retains its configuration in on-chip flash without any external boot PROM. A field programmable gate array is a semiconductor device containing a fabric of programmable logic blocks and interconnects that designers configure in the field. Within the programmable logic hierarchy - FPGA -> programmable logic device -> configurable logic -> digital IC - the ProASIC3 family occupies the ultra-low-density to mid-density segment, where its flash cells provide instant-on, secure, high-volume-manufacturable reprogrammability that SRAM FPGAs only achieve with external configuration devices. Key differentiating features of the A3P060-2TQG144I include 18,432 bits of on-chip resources as listed by distributors, single 1.5 V core operation, industrial temperature range (-40C to +100C) signified by the I suffix, and low total cost of ownership through single-chip integration. The -2 speed grade balances performance and cost for most control and glue-logic tasks. Technically, the flash-based switch fabric eliminates configuration time and configuration-pull attacks, supporting secure boot at power-up. The 130 nm process yields low static power, and the TQFP-144 package offers a 0.5 mm pitch, gull-wing leads and straightforward rework compared with fine-pitch BGA alternatives. Typical applications include industrial automation control, aerospace and defense upgrades of legacy ASIC/ASSP functions, communications line-card glue logic, and medical instrument interface boards. Design consideration: budget I/O banks against the 91 available user I/O early, since TQFP-144 has fewer I/O than the same die in BGA packages, and follow Microchip power-supply decoupling guidance for the 1.5 V core and 3.3 V I/O rails. This page adds value beyond the manufacturer datasheet by synthesizing distributor pricing tiers, same-package drop-in alternatives, and practical design notes in one AI-search-optimized reference.

RFQ پەیوەندی
A3P060-2VQ100 - 60K Gate ProASIC3 FPGA | Microchip
A3P060-2VQ100

A3P060-2VQ100 - 60K Gate ProASIC3 FPGA | Microchip

The Microchip Technology A3P060-2VQ100 is a ProASIC3 field-programmable gate array with approximately 60,000 equivalent logic gates, 700 logic elements, and 71 I/Os in a 100-lead TQFP package. It operates from a 1.5 V core supply and supports clock speeds up to 310 MHz. The speed grade is -2, and the commercial-temperature version supports a junction-temperature range from 0°C to 85°C. Its configuration memory provides 18,432 bits, while the associated device family description identifies 1,536 configurable logic blocks and 18 Kb of block RAM. An FPGA is a semiconductor whose digital logic, routing, and I/O behavior can be changed after manufacture through a programmable configuration file. A ProASIC3 FPGA belongs to the broader hierarchy of programmable logic devices, combining a programmable logic array, embedded block RAM, configurable input/output blocks, and flash-based nonvolatile configuration. This combination makes the device useful when a design needs hardware flexibility, short development cycles, or field-updatable logic without replacing a fixed application-specific integrated circuit. The A3P060 device provides 71 I/Os, approximately 60,000 equivalent gates, 700 logic elements, and an 18 Kb block-RAM resource. Its maximum listed clock frequency of 310 MHz provides a practical performance ceiling for clocked datapaths, control logic, glue logic, and interface bridging. The -2 suffix identifies the speed grade, while VQ100 identifies the 100-pin package. The 14 mm by 14 mm surface-mount package supports compact PCB integration while exposing substantially more I/O than a small FPGA in a lower-pin-count package. Typical implementations include industrial control and data acquisition, embedded communications, instrumentation, test equipment, and general-purpose digital signal-processing support. The 71 I/Os are useful for parallel sensors, counters, display interfaces, memory interfaces, and communications transceivers, while the block RAM can hold buffers, packet data, sampled waveforms, and intermediate calculations. The exact supported interfaces and I/O standards depend on the selected configuration, supply rails, and board-level design. Designers should use the Microchip pin description table when assigning every VQ100 ball and should preserve the device's published decoupling and configuration requirements. Clock-sensitive designs also require controlled routing, short ground-return paths, and terminated interfaces. The commercial temperature rating makes the A3P060-2VQ100 most appropriate for indoor commercial or industrial equipment whose internal temperatures remain within the specified range; use an industrial-temperature suffix when wider temperature coverage is required. This page consolidates the device's programming resources, package details, drop-in family alternatives, comparison data, and practical implementation guidance. It is intended to accelerate component selection while preserving the distinctions between speed grade, temperature grade, package, I/O count, logic capacity, and configuration memory.

RFQ پەیوەندی
A3P060-2VQG100 - ProASIC3 Flash FPGA, 60K Gates | Microchip
A3P060-2VQG100

A3P060-2VQG100 - ProASIC3 Flash FPGA, 60K Gates | Microchip

The Microchip Technology A3P060-2VQG100 is a ProASIC3 flash-based FPGA with approximately 60,000 system gates, 71 user I/Os, and 18,432 bits of dedicated flash memory, housed in a 100-pin TQFP (VQFP-G100) package with a -2 speed grade and commercial 0C to +70C temperature range. It operates from a single 1.5 V core supply. A flash-based FPGA is a field-programmable gate array that stores its configuration in non-volatile on-chip flash cells rather than an external configuration PROM. Within the semiconductor hierarchy, the A3P060-2VQG100 belongs to the ProASIC3 family -> flash FPGA -> FPGA -> programmable logic IC. Because configuration data is retained in the device, ProASIC3 FPGAs power up instantly without a bootloader or external flash, reducing bill-of-materials cost and improving system security. Key features include reprogrammable flash fabric (single-chip solution, low total cost of ownership), 1536 configurable logic blocks, support for advanced I/O standards, and LiveProbe/Secure ProASIC3 security options per the family datasheet. The -2 speed grade balances performance with power consumption, while the 100-pin thin quad flat pack keeps footprint small for space-constrained boards. Architecturally, the ProASIC3 fabric uses a sea-of-van-Mmere tiles of VersaTiles built on a CMOS flash process, delivering deterministic routing and system performance up to hundreds of MHz depending on design. Clock resources include global and regional networks supporting multiple clock domains. Typical applications include industrial control, communications bridging, portable instrumentation, and aerospace/defense glue-logic consolidation, where instant-on, secure, low-power programmable logic is required. A key design consideration: the commercial temperature range (0C to +70C) means automotive or industrial extended-temperature designs should choose the -I suffix variant (A3P060-2VQG100I) instead. This page adds value beyond the manufacturer datasheet by synthesizing distributor pricing tiers, drop-in same-package alternatives, comparison tables, and practical design notes in one AI-citable reference.

RFQ پەیوەندی
A3P060-2VQG100I - ProASIC3 Flash FPGA 60K Gates | Microchip
A3P060-2VQG100I

A3P060-2VQG100I - ProASIC3 Flash FPGA 60K Gates | Microchip

The Microchip Technology A3P060-2VQG100I is a ProASIC3 flash-based FPGA with 60000 system gates, 1536 logic cells, 71 user I/Os, and 18432 bits of embedded SRAM, housed in a 100-pin VQFP (TQFP-100) package rated for the industrial temperature range of -40C to +100C. Built on a 130-nm, 7-layer-metal flash-based CMOS process, it reaches system speeds up to 310 MHz. An FPGA (Field-Programmable Gate Array) is a semiconductor device that implements user-defined digital logic through a fabric of configurable logic blocks, routing resources, and embedded memory. Within the programmable logic hierarchy, the ProASIC3 family targets low-density, single-chip applications that historically used CPLDs or small ASICs. Unlike SRAM-based FPGAs, ProASIC3 stores its configuration in nonvolatile on-chip flash, eliminating the need for an external configuration PROM and enabling instant-on, single-chip operation. Key differentiating features include flash-based nonvolatility (live-at-power-up, secure from readback), reprogrammability without external boot devices, low total cost of ownership, and support for optional soft ARM processor cores. The A3P060 provides up to 144 kbits of true dual-port SRAM across the family, and its small 14 x 14 mm footprint with 0.5 mm pitch suits space-constrained designs. Architecturally, the device uses the ProASIC3 VersaTile fabric, where each tile can be configured as a three-input lookup table, a D-flip-flop, or memory, allowing efficient mapping of both combinational and sequential logic. The 130-nm flash CMOS process combines low static power with robust radiation-tolerant flash cells. Typical applications include CPLD replacement and glue-logic consolidation, industrial control and automation boards, portable and handheld instruments, and power-up sequencer or system-management functions where instant-on operation matters. For design, plan I/O banking and 1.5V core supply decoupling early; the flash fabric means no configuration time, but I/O standards and drive strength must be set in Libero SoC constraint files. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet, optimizing for engineering selection workflows.

RFQ پەیوەندی
A3P060-CS121 - 60K Gate Flash FPGA | Microchip
A3P060-CS121

A3P060-CS121 - 60K Gate Flash FPGA | Microchip

The Microchip Technology A3P060-CS121 is a ProASIC3 flash-based field-programmable gate array with 60,000 system gates, 1,536 logic cells, and 96 user I/Os, housed in a 121-ball VFBGA CSBGA package. It uses a 130 nm flash CMOS process with seven metal layers and supports reprogrammable nonvolatile configuration, making it suitable for compact programmable-logic and ASIC-prototyping designs. A field-programmable gate array is a programmable-logic device in the semiconductor hierarchy. Its configurable logic blocks, embedded memory resources, and programmable I/Os replace application-specific integrated-circuit development with a device that can be programmed and reprogrammed during development. The ProASIC3 family supports products ranging from low-density control logic to designs requiring 1 million system gates and 144 kbits of true dual-port SRAM. The A3P060 position provides 60,000 system gates, 1,536 logic cells, and 96 user I/Os. Its 121-VFBGA CSBGA package is specified as a 6 mm by 6 mm package, approximately 0.99 mm high, with 0.50 mm ball pitch. The small footprint suits space-constrained board layouts, although its fine-pitch ball array requires careful PCB construction and inspection. Its flash-based CMOS architecture retains the configuration in nonvolatile memory and supports Instant On Level 0 operation. The process uses six copper layers within a seven-layer metal stack. These characteristics make the device useful where deterministic startup, field updates, and logic consolidation are valuable, but designers must still consider power-up sequencing, I/O standards, and programmed-state current draw. Typical applications include communications interface logic, industrial control modules, avionics subsystems, computing peripherals, consumer-equipment controllers, and ASIC prototypes. The ProASIC3 family is positioned for these markets because it combines reprogrammability, a broad density range, and integrated programmable I/O without requiring a mask set for every design revision. The main PCB consideration is the 0.50 mm ball pitch of the 121-VFBGA CSBGA. Follow the manufacturer's land-pattern and assembly requirements, provide suitable via and pad geometry, and inspect the relatively dense solder joints. Confirm the required I/O voltage, configuration interface, clocking plan, and power domains against the A3P060 datasheet before releasing the layout. This page consolidates the device identity, package details, family-level resources, sourcing workflow, and practical design considerations for engineers evaluating the A3P060-CS121. The replacement analysis also distinguishes speed-, temperature-, and package-related ordering variants so that a proposed substitution is reviewed for actual board-level compatibility rather than name similarity alone.

RFQ پەیوەندی
A3P060-CS121I - 60K Gate ProASIC3 FPGA | Microchip
A3P060-CS121I

A3P060-CS121I - 60K Gate ProASIC3 FPGA | Microchip

The Microchip A3P060-CS121I is a ProASIC3 field-programmable gate array with an equivalent gate count of 60,000, 96 input/output terminals, and a 121-ball CSBGA package. It combines programmable logic, 18,432 configuration bits, and a low-power FPGA architecture in a compact surface-mount package designed for embedded control, communications, and industrial systems. A field-programmable gate array is a programmable digital semiconductor whose interconnected logic blocks can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining the parallel flexibility of an ASIC with field-updatable configuration. The ProASIC3 family is positioned for designs requiring more logic density than small CPLDs while retaining reprogrammability and a compact package. The A3P060 device provides 96 I/O terminals and an equivalent gate count of 60,000. Its listed core supply range is 1.425 V to 1.575 V, and the industrial-temperature listing identifies a junction-temperature range of -40 °C to 100 °C. These characteristics make it suitable for compact embedded platforms requiring deterministic programmable logic, serial interfaces, control functions, and modest signal-processing capability. Programmable logic blocks and associated interconnect resources allow system designers to implement counters, state machines, interfaces, protocol engines, and control logic in one configurable device. The 121-ball CSBGA package supports high-density board integration while reducing the footprint compared with larger FPGA packages. Designers must still account for ball assignment, power-plane distribution, signal integrity, programming access, and thermal behavior when laying out the PCB. Typical uses include industrial automation, communications infrastructure, embedded control, sensor conditioning, and compact data-acquisition systems. The same device can serve as a bridge between sensors and host processors, implement a dedicated protocol controller, or consolidate several fixed-function logic blocks into a single reprogrammable component. Its 96-I/O count is particularly useful where a design needs many digital connections without moving to a larger package. For reliable implementation, use the manufacturer's pin-assignment and package information when assigning power, ground, configuration, and I/O balls. Place decoupling capacitors close to the appropriate supply balls and preserve the recommended high-speed routing practices. Programming-system compatibility and the selected configuration method should also be checked before committing the design to production. This product page combines the A3P060 family identity, exact A3P060-CS121I ordering code, package information, sourcing details, pin-compatible family options, and practical FPGA design guidance. It is intended to help engineers confirm footprint, logic density, operating conditions, and replacement options before integrating the device into an embedded system.

RFQ پەیوەندی
A3P060-CSG121 - 60K Gate ProASIC3 FPGA | Microchip
A3P060-CSG121

A3P060-CSG121 - 60K Gate ProASIC3 FPGA | Microchip

The Microchip A3P060-CSG121 is a ProASIC3 field-programmable gate array with 60,000 equivalent logic gates, 1,536 logic array blocks, 96 I/O pins, and 18,432 bits of RAM in a 121-VFBGA CSBGA package. It combines a reprogrammable CMOS FPGA architecture with a compact surface-mount footprint for embedded control, interface bridging, and signal-processing designs. A field-programmable gate array is a digital semiconductor whose configurable logic fabric can be programmed after fabrication. Within the product hierarchy, an FPGA belongs to programmable logic and sits above basic logic gates but below application-specific processors and larger SoC platforms. Unlike a fixed-function microcontroller or ASIC, an FPGA can implement parallel control paths, protocol interfaces, data acquisition logic, and hardware accelerators in one reconfigurable device. The A3P060 device provides 1,536 logic array blocks, 18,432 bits of RAM, and 96 user I/O, allowing multiple independent logic sections and short internal routing distances. Its 60,000-equivalent-gate capacity is suitable for moderate-complexity embedded systems that need deterministic parallel operation or configurable hardware. The 121-VFBGA package also supports dense board layouts, although its fine ball pitch requires careful PCB assembly and inspection. Programming configuration data into the ProASIC3 fabric lets engineers implement counters, state machines, protocol converters, waveform generators, and interface control logic. The on-chip RAM can support buffering, packet storage, and intermediate data handling, while the 96 I/O pins provide connections to external memory, sensors, converters, and communication transceivers. This architecture is particularly useful when hardware parallelism or field reconfiguration provides more value than a fixed program flow. Typical applications include industrial automation, communications interface conversion, data acquisition, instrumentation, embedded security, and control systems. A3P060-CSG121 can also be used as a compact hardware accelerator or glue-logic device alongside a microcontroller or processor. Its 121-VFBGA package is appropriate for production boards using fine-pitch assembly methods rather than prototypes built with through-hole or large-pitch adapters. Designers should verify the power rails, configuration interface, clock sources, I/O standards, and exposed-pad requirements against the Microchip A3P060 datasheet before layout release. Decoupling, return paths, and ball-pitch assembly capability must be planned early because the 121-VFBGA footprint is not directly compatible with standard coarse-pitch prototyping boards. This product page organizes the core ProASIC3 resource figures, package identity, ordering variants, and practical drop-in comparison points. It also highlights replacement constraints that matter after initial schematic selection: logic density, I/O count, package geometry, speed grade, and operating-temperature options must all be confirmed before a substitute is approved for production.

RFQ پەیوەندی
A3P060-FG144 - 60K Gate ProASIC3 FPGA | Microchip
A3P060-FG144

A3P060-FG144 - 60K Gate ProASIC3 FPGA | Microchip

The Microchip Technology A3P060-FG144 is a ProASIC3 field-programmable gate array with 60,000 logic gates, 700 logic elements, 18 Kb of block RAM, and up to 96 user I/O in a 144-FPBGA package. The commercial-temperature device operates from a 1.5 V core supply and is built on 130 nm CMOS technology. An FPGA is a programmable semiconductor whose digital logic blocks, interconnect, and I/O can be configured after manufacture. The A3P060 belongs to the ProASIC3 family, which combines flash-based nonvolatile configuration with low-power operation, small-footprint packaging, and reprogrammability. It is intended for compact control, interface, data-capture, and embedded-processing designs that require a short path between a defined logic architecture and a finished PCB. Key device attributes include a maximum stated performance of 231 MHz, 1,536 logic cells across 96 logic-element blocks, 18 Kb of block RAM, and 96 I/O. The 144-FPBGA package measures 13 x 13 mm and is offered in a tray configuration for the identified commercial part. Its 130 nm process supports integration within a relatively compact board area while maintaining a low-cost design entry point. The ProASIC3 architecture separates programmable logic from fixed peripheral functions, allowing designers to implement control logic, counters, state machines, bus controllers, and data paths in one device. Flash-based configuration means the logic image is retained in the device, eliminating the need for a separate configuration PROM when the system does not require runtime reconfiguration. Typical uses include industrial control modules, test and measurement front ends, communications adapters, embedded instrumentation, and compact consumer or automotive-adjacent products. The 96 I/O count supports external memory interfaces, communication transceivers, status indicators, and sensor conditioning front ends while retaining a small package footprint. Designers should confirm the board footprint, ball assignment, voltage rails, clock requirements, and configuration interface against the manufacturer documentation before layout release. The FG144 package requires careful via-in-pad and escape-routing planning because its fine-pitch ball grid constrains access to inner rows. This page combines the manufacturer's A3P060 family information with distributor package, capacity, temperature, and sourcing details, then adds same-footprint speed and temperature alternatives, comparison parameters, and practical PCB guidance for design evaluation.

RFQ پەیوەندی
A3P060-FG144I - 60K Gate ProASIC3 FPGA | Microchip Technology
A3P060-FG144I

A3P060-FG144I - 60K Gate ProASIC3 FPGA | Microchip Technology

The Microchip Technology A3P060-FG144I is a ProASIC3 flash field-programmable gate array with 60,000 equivalent logic gates, 96 user input/outputs, and a 144-ball low-profile BGA package. It is built on 130 nm CMOS technology and supports a 1.5 V core, making it suitable for compact embedded control, communications, industrial, and automotive designs that require nonvolatile FPGA configuration. A field-programmable gate array is a programmable digital integrated circuit containing configurable logic blocks, programmable interconnect, and input/output resources. An FPGA sits above fixed-function logic and programmable processors in the digital-device hierarchy, allowing parallel hardware logic to be implemented and reprogrammed without changing the PCB. The ProASIC3 family combines flash-based configuration with a large gate count and a low-power 1.5 V core. The A3P060-FG144I provides 1,536 configurable logic blocks according to the product-page data, approximately 60,000 equivalent gates, 96 I/O terminals, and 18 Kb of block RAM. Published frequency references range from 231 MHz to 350 MHz depending on the specific speed grade and characterization context. Its single-chip architecture reduces external memory requirements and supports in-system reprogramming for field updates. The ProASIC3 architecture is organized around programmable logic blocks and a flexible interconnect network. Its low-impedance flash switches allow configuration data to be stored on-chip, while dedicated I/O resources support multiple interface standards. The 1.5 V core is useful in systems where the FPGA operates from a single low-voltage rail and must share power sequencing with adjacent circuitry. Typical applications include industrial controllers, data acquisition equipment, communications interfaces, automotive electronics, embedded security systems, and general-purpose glue-logic platforms. The 144-ball package provides a high pin count in a compact land pattern, while the 96 available user I/Os support parallel buses, control signals, serial interfaces, and mixed-signal connectivity. For new PCB layouts, confirm the exact ball map, exposed-pad requirements, and power pins in the manufacturer datasheet before routing. Verify the selected speed and temperature suffix against the system clock target and ambient conditions. Because ProASIC3 is an older programmable-logic family, software-tool availability and long-term availability should be confirmed during sourcing. This page consolidates package, logic-resource, temperature-grade, and interface information with same-footprint replacement options and engineering-oriented comparison guidance. It is intended to help designers evaluate the A3P060-FG144I against other ProASIC3 configurations before committing to a PCB, toolchain, or production schedule.

RFQ پەیوەندی
A3P060-FG144T - 60K-Gate Automotive ProASIC3 FPGA | Microchip
A3P060-FG144T

A3P060-FG144T - 60K-Gate Automotive ProASIC3 FPGA | Microchip

The Microchip A3P060-FG144T is an automotive-grade ProASIC3 flash FPGA with approximately 60,000 logic gates, 231 MHz maximum operating frequency, 130 nm process technology, and 96 I/O in a 144-LBGA package. It is designed for embedded automotive and industrial logic systems requiring nonvolatile configuration memory, deterministic programmable logic, and a compact surface-mount package. A field-programmable gate array is a programmable digital semiconductor that combines configurable logic fabric, programmable interconnect, and input/output blocks. Within the broader semiconductor hierarchy, the A3P060-FG144T belongs to the FPGA and CPLD class, while ProASIC3 is a flash-based FPGA family. Flash configuration retains the programmed circuit after power removal, reducing external boot-memory requirements compared with SRAM-only FPGA architectures. The device provides 1,536 configurable logic blocks, approximately 18,432 flip-flop or latch positions, and 96 user I/O according to the ProASIC3 family information. It supports a 1.5 V core operating condition for systems designed around 1.5-V-only power rails. Its 231 MHz performance figure makes it appropriate for control logic, interface bridging, automotive body electronics, sensor aggregation, and general-purpose embedded logic rather than computationally intensive signal processing. The automotive-oriented part designation identifies the A3P060-FG144T within the Automotive ProASIC3 Flash Family FPGAs. Automotive qualification documentation and product-selection material should be consulted when the application requires AEC-Q100 status, PPAP documentation, or production-part approval. The family documentation also identifies low-impedance flash switches and a core tile that can implement either a three-input lookup-table function or a D flip-flop or latch with enable control. Typical uses include vehicle body-control modules, sensor interfaces, actuator controllers, gateway logic, panel electronics, and industrial control equipment. The 96-I/O count provides substantial connectivity for mixed digital interfaces, while 60K-gate density supports concurrent state machines, communication protocols, data acquisition, and supervisory logic in one device. Designers should preserve the package-specific footprint, ball assignment, power architecture, and programming configuration during any migration. Use the pin-description and package tables in the manufacturer datasheet when assigning PCB balls. A 1.5 V core rail requires suitable decoupling and sequencing, and the flash configuration architecture requires the correct programming algorithm and device-specific toolchain. This page combines the verified A3P060-FG144T family specifications, package identification, sourcing links, same-footprint alternatives, and practical migration guidance. It is intended to help engineers quickly distinguish exact automotive ordering codes, assess pin-compatible options, and plan PCB, programming, power, and qualification reviews before committing a design to production.

RFQ پەیوەندی
A3P060-FGG144 - 700-LE ProASIC3 FPGA, 144-LBGA | Microchip
A3P060-FGG144

A3P060-FGG144 - 700-LE ProASIC3 FPGA, 144-LBGA | Microchip

The Microchip Technology A3P060-FGG144 is a ProASIC3 flash field-programmable gate array with 700 logic elements, 60,000 equivalent gates, 96 user I/O, and a 231 MHz maximum operating frequency, housed in a 144-ball low-profile grid-array package. The device combines a nonvolatile flash configuration architecture with a 1.5 V core operating voltage in a compact surface-mount package. A field-programmable gate array is a programmable logic device that converts a digital design into an integrated circuit by configuring internal logic, routing, and I/O resources. The ProASIC3 family occupies the FPGA level of the programmable-logic hierarchy and provides system performance and configuration features intended for industrial control, communications, networking, consumer, and embedded applications. The A3P060-FGG144 provides 1,536 configurable logic blocks, equivalent to 700 logic elements or 60,000 equivalent gates. Its 96 user I/O support interfaces to external memory, control signals, communications peripherals, and mixed-signal subsystems. Flash configuration supports repeated programming without a separate external configuration PROM, while a 144-ball package and 1.0 mm terminal pitch support dense board layouts. The A3P060-FGG144 is manufactured on a 130 nm CMOS process and operates from a nominal 1.5 V core supply. These details place it in the conventional ProASIC3 architecture, where low static power and deterministic flash configuration are central design considerations. Designers must still observe the device-specific AC timing, I/O standards, power sequencing, and configuration requirements in the manufacturer documentation. Typical uses include industrial automation, communications interfaces, embedded control systems, and compact logic platforms. The 96-I/O count is useful for systems needing multiple external buses or peripheral connections, while the 144-LBGA footprint reduces board area compared with larger leaded packages. A final design should verify every assigned pin against the package ball map and confirm that the selected clock and I/O operating modes meet system timing. A critical design step is to program the configuration before enabling dependent logic and to preserve correct JTAG access during production and debug. Board layouts should provide clean power and ground distribution, route configuration and programming signals away from high-speed data paths, and follow the manufacturer’s BGA assembly requirements for thermal performance and soldering. This product record combines the exact A3P060-FGG144 ordering information with family-level architecture details, same-family drop-in options, procurement data, and practical implementation guidance. It is intended to help engineers identify the correct ProASIC3 device, distinguish grade and suffix variants, and plan PCB, configuration, and lifecycle decisions before committing a design to production.

RFQ پەیوەندی
A3P060-TQ144 - 60K-Gate ProASIC3 FPGA | Microchip
A3P060-TQ144

A3P060-TQ144 - 60K-Gate ProASIC3 FPGA | Microchip

Microchip Technology A3P060-TQ144 is a ProASIC3 flash-based field-programmable gate array with 60,000 system gates, 91 programmable I/O pins, and 18,432 RAM bits in a 144-pin TQFP package measuring 20 mm by 20 mm. The device uses CMOS logic and operates from a 1.5 V core supply, with the identified commercial-temperature configuration specified for 0°C to 70°C. Its surface-mount package supports compact embedded control, industrial automation, consumer electronics, and automotive-adjacent control systems where reprogrammable logic and a high pin count are useful. A field-programmable gate array, or FPGA, is a programmable digital semiconductor that combines configurable logic blocks, programmable interconnect, and user I/O in one device. An FPGA belongs to the programmable-logic hierarchy alongside CPLDs, while offering greater logic density and more flexible routing than a basic low-complexity programmable device. The ProASIC3 family combines flash configuration, reusable silicon, and field programmability to support design revisions, production configuration, and logic updates without changing the PCB. The A3P060 provides 60,000 system gates, 91 user-programmable I/O pins, and 18,432 RAM bits. These figures make it suitable for control logic, interface bridging, protocol conversion, embedded state machines, and multi-channel signal conditioning. Its 144-pin TQFP footprint exposes substantially more I/O than a small FPGA package, allowing parallel buses, counters, capture logic, and multiple external interfaces to be consolidated on a single device. The device is manufactured in CMOS technology and belongs to the ProASIC3 flash FPGA family. Its architecture places configurable logic and routing resources between programmable I/O, enabling implementation of synchronous and asynchronous digital systems. Unlike a mask-programmed ASIC, the FPGA can be configured after manufacture, shortening prototype cycles and enabling one board design to support several firmware or logic revisions. The 1.5 V core architecture should be paired with the power-supply and decoupling network specified by the manufacturer. Typical applications include industrial factory controllers, sensor and monitoring interfaces, consumer control boards, automotive accessory controllers, and compact embedded systems requiring numerous parallel I/O. A design can place the A3P060 between sensors or actuators and a higher-level processor, using its programmable logic for protocol conversion, timing, filtering, and data capture. The same pin-compatible approach also supports controlled migration among qualified ProASIC3 speed, package, and temperature configurations. PCB design should preserve the manufacturer's recommended power, ground, clock, and configuration arrangements. Place decoupling capacitors close to the supply pins, provide a stable clock source with the required signal integrity, and leave programming and configuration access available for manufacturing and field updates. Verify every signal against the pin-assignment table for the exact ordering code before releasing the layout. This product record combines the exact A3P060-TQ144 ordering information with package, resource, temperature, voltage, and I/O characteristics, plus a pin-to-pin replacement assessment and practical selection guidance. It is intended to accelerate schematic review, PCB compatibility checks, sourcing, and design-in decisions for ProASIC3-based systems.

RFQ پەیوەندی
A3P060-TQ144I - 60K Gate FPGA | Microchip Technology
A3P060-TQ144I

A3P060-TQ144I - 60K Gate FPGA | Microchip Technology

The Microchip Technology A3P060-TQ144I is a ProASIC3 field-programmable gate array with 60,000 equivalent logic gates, 1,536 configurable logic blocks, and a listed system frequency of 231 MHz. It is packaged as a 144-lead TQFP/LQFP device with 91 user I/O and operates from a nominal 1.5 V core supply. The device is based on 130 nm CMOS technology and combines programmable logic, embedded block RAM, dedicated I/O resources, and on-chip configuration support. A ProASIC3 FPGA is a reprogrammable digital semiconductor in the field-programmable gate array hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA allows logic functions, interfaces, and signal processing to be implemented through configuration rather than mask changes. The A3P060 belongs to the low-density ProASIC3 family, positioned for compact control, interface, communications, and embedded-processing systems where moderate logic capacity and a large I/O count are more important than very high performance. The device offers approximately 60K equivalent gates, 1,536 logic cells, and 91 user I/O. A listed maximum operating frequency of 231 MHz supports moderately clocked digital systems, while 130 nm CMOS fabrication provides a useful balance of density, cost, and power. Its 144-pin TQFP/LQFP package exposes substantially more I/O than the smaller package options in the A3P060 family and supports board-level integration without a ball-grid array. Configuration flash is integrated with the FPGA architecture, allowing designs to be programmed and reprogrammed rather than permanently masked. The architecture is suited to parallel logic, state machines, bus interfaces, communication control, and small embedded datapaths. Its 91 available I/O can be allocated according to the selected device pinout and board requirements, making signal planning and power distribution important parts of the design process. Typical uses include industrial automation, test and measurement equipment, communications interfaces, embedded control, data acquisition, and compact embedded systems. The 144-lead package is particularly useful when a design requires numerous external connections while retaining a conventional, inspectable surface-mount footprint suitable for prototype assembly and production test. Power and signal-integrity design should follow the manufacturer's recommended core, I/O, and configuration rails. Confirm the selected I/O standard, voltage tolerances, decoupling requirements, and clock topology against the A3P060 documentation before layout. A conservative approach is to place bypass capacitors directly at the supply pins and keep high-speed clock and configuration routes short, continuous, and separated from noisy switching nodes. This product page combines the verified device specifications, package and temperature information, procurement paths, drop-in alternatives, comparison parameters, and application-oriented design guidance. These details help engineers evaluate whether the 60K-gate A3P060-TQ144I fits an existing 144-lead board before committing to programming and layout work.

RFQ پەیوەندی
A3P060-VQ100 - 60K Gate 231MHz FPGA | Microchip Technology
A3P060-VQ100

A3P060-VQ100 - 60K Gate 231MHz FPGA | Microchip Technology

Microchip Technology A3P060-VQ100 is a ProASIC3 flash-based field-programmable gate array with 60,000 system gates, 1,536 logic cells or logic blocks, and an operating frequency listed as 350 MHz in its technical specifications. It is packaged in a 100-pin VQFP measuring approximately 14 x 14 mm and provides up to 71 user I/O according to product listings. The device is identified as the 231 MHz, 1.5 V grade in distributor catalog information. A ProASIC3 FPGA is a user-programmable semiconductor that combines configurable logic, flip-flop resources, memory, and programmable I/O in one device. Within the product hierarchy, it is an FPGA, a programmable logic device, and a semiconductor. Flash configuration technology allows the device to retain its programmed configuration without requiring a separate configuration PROM after programming, making it suitable for compact embedded systems that need field updates or repeated logic revisions. Key characteristics include a 1.5 V core supply, CMOS logic, 60,000 system gates, and a 100-pin VQFP package. The ProASIC3 architecture provides up to 144 kbits of True Dual-Port SRAM according to the family documentation excerpt, while the listed user-I/O count of 71 supports interfaces to external processors, memories, converters, and communications circuits. Its 130 nm, seven-layer-metal implementation reflects the process generation used for the ProASIC3 family. The A3P060-VQ100 occupies the low-density end of the ProASIC3 range while offering substantially more logic than small CPLDs. It is suitable for control logic, protocol bridging, peripheral consolidation, and embedded signal-processing functions that require parallel programmable resources. A design must still verify the exact timing, I/O standard, supported I/O count, and pin assignment for the selected package in the Microchip device documentation. Typical uses include industrial control modules, data-acquisition front ends, communications equipment, embedded instrumentation, and compact embedded-processing subsystems. In these applications, the 71 listed I/Os allow the FPGA to connect sensors, converters, memories, and serial transceivers while internal logic blocks implement buffering, state machines, arithmetic, and protocol handling. A key design consideration is supply decoupling and pin-compatible planning. Place the required capacitors near the power and ground pins, respect the documented I/O voltage limits, and use the manufacturer pin-assignment table to assign every VQFP lead. Programming tools, device configuration files, and the correct A3P060 device selection must also be coordinated before placing the component in production. This page organizes the A3P060-VQ100's principal electrical, logical, packaging, and application characteristics while separating documented functions from parameters that still require project-specific verification. It also provides engineering-focused comparison points and drop-in candidates identified from the same ProASIC3 family.

RFQ پەیوەندی
A3P060-VQ100I - 60K Gate Flash FPGA | Microchip Technology
A3P060-VQ100I

A3P060-VQ100I - 60K Gate Flash FPGA | Microchip Technology

The Microchip Technology A3P060-VQ100I is a ProASIC3 flash field-programmable gate array with 60,000 system gates, 1,536 logic cells, up to 71 user I/Os, and a 100-pin VQFP package measuring 14 x 14 mm. It combines reprogrammable nonvolatile configuration memory with 350 MHz internal performance and 1.5 V core operation. A field-programmable gate array is a semiconductor whose logic functions are configured after manufacture. Within the product hierarchy, the A3P060-VQ100I is an FPGA, a programmable-logic IC, and a member of Microchip's ProASIC3 flash FPGA family. Flash-based configuration retains the programmed logic without continuous static RAM power, supporting an Instant On operating model for embedded control, communications, and industrial systems. The device provides 18 Kbit of block RAM according to the ProASIC3 family documentation, 1,536 logic cells or logic blocks, and up to 71 user I/Os. Its 130 nm CMOS process uses a seven-layer metal structure with six copper layers. The VQFP-100 package has a 0.50 mm pitch and a stated height of 1 mm, supporting compact board layouts without a fine-pitch BGA footprint. ProASIC3 architecture allows the logic design to be reprogrammed rather than permanently patterned as a custom ASIC. This shortens development cycles for design revisions, prototype correction, and production configuration changes. The A3P060-VQ100I designation identifies the 60K-gate device in a 100-pin VQFP package, with the listed automotive-oriented ordering option and a nominal 350 MHz internal frequency for the base A3P060-VQ100 family. Typical uses include industrial control logic, network-interface front ends, instrument signal conditioning, programmable test equipment, and compact embedded gateways. The combination of 71 I/Os, embedded block RAM, and nonvolatile configuration is especially useful when a design needs moderate logic density, flexible I/O allocation, and field updates without replacing the board. PCB design should preserve the manufacturer's recommended 0.50 mm VQFP land pattern, provide clean return paths beneath the device, and validate high-speed clock and I/O routing with the appropriate ProASIC3 timing constraints. Decoupling and configuration-access circuitry must also follow the family-level guidance in the manufacturer datasheet. This page combines the exact orderable MPN, family-level architecture data, practical PCB guidance, and a compatibility-focused comparison with same-package ProASIC3 options. It is intended to help engineers confirm package fit, logic resources, memory availability, and design-tool requirements before committing a ProASIC3 board to production.

RFQ پەیوەندی
A3P060-VQG100 60K Gate FPGA 231MHz 1.5V TQFP
A3P060-VQG100

A3P060-VQG100 60K Gate FPGA 231MHz 1.5V TQFP

The Microchip Technology A3P060-VQG100 is a ProASIC3 Flash FPGA with 60,000 system gates, approximately 700 logic elements, 71 user I/Os, a 1.5 V core supply, and operation up to 231 MHz in a 100-pin TQFP package. The A3P060-VQG100 is designed for compact embedded systems that require programmable logic, nonvolatile configuration storage, and a moderate number of high-speed or general-purpose I/Os without moving to a larger FPGA package. ProASIC3 is a flash-based FPGA family within the broader field-programmable gate array category. Unlike mask-programmable ASICs, an FPGA allows logic, routing, and interface behavior to be changed after manufacture through programming. The flash configuration architecture provides a single-chip implementation for applications that do not require an external configuration PROM, while the 100-pin TQFP package supports conventional surface-mount assembly. Key device characteristics include 60,000 system gates, approximately 700 logic elements, 71 I/Os, a 1.5 V core voltage, and a listed maximum frequency of 231 MHz. These figures place the A3P060-VQG100 in the low-density, low-power end of the ProASIC3 family. The device is suitable for control logic, protocol bridging, instrumentation, industrial interfaces, embedded data acquisition, and system-support functions where a programmable logic fabric is more flexible than a fixed application-specific integrated circuit. The nonvolatile flash FPGA architecture simplifies field updates and reduces the number of supporting components required for configuration. The 71 available I/Os provide connectivity for external memories, sensors, converters, communication devices, and control signals. In a typical design, the FPGA would receive serialized configuration data from a programming interface, support reset and clock management functions, and implement data acquisition, sequencing, or interface conversion in its programmable fabric. Package and board layout are important design considerations for this 100-pin TQFP device. The exposed board area and pin pitch require careful fanout between the FPGA and surrounding circuitry, while the 1.5 V core supply should be filtered close to the device. Signal-integrity practices include short clock routes, controlled return paths, and separation between sensitive analog inputs and high-speed digital nets where the board design permits. This page combines the verified device identity, package information, ProASIC3 feature summary, sourcing guidance, and engineering-oriented selection notes. It is intended to help engineers identify the correct A3P060-VQG100 configuration, plan a compatible replacement strategy, and select suitable application companions without confusing the exact orderable MPN with related ProASIC3 devices.

RFQ پەیوەندی
A3P060-VQG100I - ProASIC3 60K Gate FPGA | Microchip
A3P060-VQG100I

A3P060-VQG100I - ProASIC3 60K Gate FPGA | Microchip

The Microchip Technology A3P060-VQG100I is a ProASIC3 flash-based field programmable gate array (FPGA) with 60K system gates, 700 logic elements, 71 user I/Os, and 18,432 RAM bits, housed in a 100-pin TQFP/VQFP package. It operates from a 1.5V core, delivers up to 231 MHz system performance, and is rated for -40°C to +100°C industrial temperature operation. An FPGA is a reconfigurable semiconductor device that implements digital logic by programming an array of logic elements and programmable interconnects. The ProASIC3 family uses flash-based configuration cells, which makes the A3P060-VQG100I a single-chip, instant-on FPGA that does not require an external boot PROM. This places it above simple programmable logic devices and below complex SoC FPGAs, providing a low-power, high-reliability option for medium-density logic integration. Key differentiating features include 60,000 system gates, 700 logic elements, 71 user I/O pins, 18,432 RAM bits, and a 100-pin TQFP/VQFP package. The 130nm flash process enables non-volatile configuration, secure programming with FlashLock, and low total cost of ownership (TCO). The industrial temperature grade extends system operation to harsh environments while maintaining reprogrammability for field updates. The ProASIC3 architecture offers predictable timing, low power consumption, and a single-chip footprint without the cost or complexity of SRAM-based FPGAs with external configuration memory. The 1.5V core supply combined with 231 MHz performance allows moderate-speed parallel processing, bus interfaces, and control logic in a compact 100-pin package. Typical applications include industrial automation and control, wired and wireless communications, test and measurement instruments, medical monitoring, and avionics. The combination of instant-on operation, 71 I/O, and industrial temperature makes it suitable for modules that must start reliably without host configuration. When designing with the A3P060-VQG100I, pay close attention to core voltage decoupling, I/O bank voltage requirements, and thermal management of the TQFP-100 package. Because the device is flash-based, configure security and JTAG access carefully to protect intellectual property. This page synthesizes distributor pricing, verified stock status, drop-in alternatives, and practical design guidance beyond the manufacturer datasheet, helping engineers evaluate the A3P060-VQG100I quickly and confidently.

USD $6.95 پەیوەندی
A3P1000-1FG256T - ProASIC3 FPGA 1M Gates 177 I/O | Microchip
A3P1000-1FG256T

A3P1000-1FG256T - ProASIC3 FPGA 1M Gates 177 I/O | Microchip

The Microchip Technology A3P1000-1FG256T is a ProASIC3 flash-based Field Programmable Gate Array (FPGA) delivering 1,000,000 system gates (24,576 VersaTiles), 177 user I/Os, and 147,456 bits of embedded configuration flash in a 256-ball Fine-Pitch Ball Grid Array (256-LBGA / FBGA-256) package with 1 mm ball pitch and a -1 speed grade. A flash FPGA is a type of field-programmable gate array that stores its configuration in on-chip non-volatile flash memory rather than an external SRAM configuration device. Within the power-management-and-programmable-logic hierarchy, the ProASIC3 sits in the single-chip, instant-on FPGA class: it powers up within microseconds, needs no external boot PROM, and occupies less board space than SRAM FPGA solutions that require companion flash. Key features include live-at-power-up operation, reprogrammability with abundant advanced features, low total cost of ownership (TOC), single-chip operation, and proven security features that protect designs from unauthorized access and cloning. The 1 mm pitch FBGA-256 footprint supports compact, high-density layouts suited to space-constrained systems. Architecturally, the ProASIC3 uses Microchip's third-generation flash FPGA fabric built around VersaTile logic elements, each usable as a three-input lookup table (LUT) or as a D-flip-flop/latch with enable, enabling efficient fabric utilization. Flash-based configuration also mitigates the need for ASIC migration at higher volumes, making the family a cost-effective ASIC replacement for consumer, networking/communications, computing, and avionics markets. The A3P1000-1FG256T is noted in distributor data as an automotive-graded part (AEC-Q100 per Utmel listing), broadening its qualification envelope. Typical applications include electronic control units (ECU) in vehicles, industrial automation controllers, communications interface bridging, and portable or battery-operated systems where instant-on behavior and single-chip configuration are mandatory. When designing with this device, plan I/O banking and power-supply sequencing per the ProASIC3 flash family datasheet, and verify the -1 speed grade timing closure in Libero SoC before committing the PCB. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
A3P1000-1FG484T - ProASIC3 FPGA, 1M Gates, 300 I/O | Microchip
A3P1000-1FG484T

A3P1000-1FG484T - ProASIC3 FPGA, 1M Gates, 300 I/O | Microchip

The Microchip Technology A3P1000-1FG484T is a ProASIC3 flash-based Field Programmable Gate Array (FPGA) offering 1 million system gates, 300 user I/Os, and 147,456 bits of RAM, housed in a 484-pin FBGA package. It operates at a core voltage of 1.5V and supports system performance up to 272 MHz, making it a versatile single-chip solution for a wide range of applications. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence "field-programmable." Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and a hierarchy of reconfigurable interconnects that allow the same device to implement different digital logic functions. The ProASIC3 family uses flash-based configuration, meaning it is non-volatile and retains its programming even without power, offering instant-on capability and enhanced security compared to SRAM-based FPGAs. This places the A3P1000 within the hierarchy: FPGA -> programmable logic device -> integrated circuit -> semiconductor. Key features of the A3P1000-1FG484T include 1 million system gates, 300 user I/Os, 147,456 bits of RAM, and 11K logic elements (as noted by Mouser). It supports multiple I/O standards and features four I/O banks with dedicated supplies, allowing flexible voltage assignment. The device is automotive-grade (indicated by the 'T' suffix), meeting AEC-Q100 requirements for reliability in harsh environments. Its flash-based architecture provides low power consumption, high security against reverse engineering, and immunity to configuration bitstream corruption. Technically, the A3P1000 is built on a 130nm flash process, offering a balance of density, performance, and cost. It includes up to 272 MHz system performance, 1.5V core operation, and supports various memory interfaces. The device also features an abundance of advanced features such as programmable I/O, clock management, and embedded memory, making it suitable for complex digital designs. The 484-pin FBGA package provides a compact footprint with excellent thermal and electrical characteristics. Typical applications include automotive electronics (e.g., infotainment, driver assistance), industrial control systems, communications infrastructure, and aerospace/defense systems where reliability and security are paramount. The flash-based nature makes it ideal for applications requiring instant-on operation and secure boot. When designing with this device, consider the I/O bank voltage requirements and ensure proper decoupling of the 1.5V core supply. The device supports JTAG programming and can be reprogrammed in-system, offering flexibility during development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P1000-1FG484T.

RFQ پەیوەندی
A3P1000-1FGG144T - ProASIC3 FPGA, 1M Gates | Microchip
A3P1000-1FGG144T

A3P1000-1FGG144T - ProASIC3 FPGA, 1M Gates | Microchip

The Microchip Technology A3P1000-1FGG144T is a flash-based Field Programmable Gate Array (FPGA) from the ProASIC3 family, offering 1,000,000 system gates, 147,456 bits of RAM, and 97 user I/Os in a 144-pin LFBGA (13x13 mm) package. It operates from a 1.425V to 1.575V core supply and supports automotive temperature range from -40°C to +125°C, making it suitable for harsh environments. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement custom digital logic. Unlike ASICs, FPGAs are reprogrammable, allowing design changes without re-fabrication. The ProASIC3 family uses flash-based configuration, which is non-volatile, meaning the device retains its configuration when power is removed, eliminating the need for external configuration memory. This places the A3P1000 in the hierarchy: FPGA -> programmable logic device -> integrated circuit -> semiconductor. Key features include 1,000,000 system gates, 147,456 bits of flash memory, and support for differential I/O standards such as LVPECL, LVDS, B-LVDS, and M-LVDS. The device includes six Clock Conditioning Circuit (CCC) blocks, one with an integrated PLL, enabling flexible clock management. It also offers programmable output slew rate and drive strength, allowing designers to optimize signal integrity and EMI. The automotive grade (T suffix) ensures operation over the extended temperature range and compliance with automotive quality standards. Architecturally, the A3P1000 is built on a flash-based process, providing instant-on capability and high security against reverse engineering. The device supports up to 97 user I/Os, which can be configured to various voltage standards. The 144-pin LFBGA package measures 13x13 mm with a 0.8 mm ball pitch, offering a compact footprint for space-constrained designs. The flash-based architecture also provides low power consumption compared to SRAM-based FPGAs, as it does not require power-on configuration loading. Typical applications include automotive electronics such as engine control units, advanced driver-assistance systems (ADAS), and infotainment systems, as well as industrial automation, motor control, and communication interfaces. The device's non-volatile configuration and wide temperature range make it ideal for safety-critical and remote applications where reliability is paramount. When designing with this FPGA, consider the I/O bank voltage requirements. The A3P1000 has four I/O banks, each with dedicated supplies, so only I/Os with compatible voltage standards can be assigned to the same bank. Proper decoupling of the core and I/O supplies is essential to minimize noise and ensure reliable operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P1000-1FGG144T.

RFQ پەیوەندی
A3P1000-1FGG256 - ProASIC3 Flash FPGA 1M Gates | Microchip
A3P1000-1FGG256

A3P1000-1FGG256 - ProASIC3 Flash FPGA 1M Gates | Microchip

The Microchip Technology A3P1000-1FGG256 is a ProASIC3 flash-based FPGA offering approximately 1 million system gates (11K logic elements per distributor listings) with 177 user I/Os, 147456 bits of configuration flash memory, and a 256-ball Fine-Pitch Ball Grid Array (FBGA/LBGA) package, operating over 0C to +85C at the commercial -1 speed grade. A flash FPGA is a type of field-programmable gate array that stores its configuration in on-chip non-volatile flash memory rather than an external configuration ROM. Within the programmable logic hierarchy, it sits alongside SRAM FPGAs and CPLDs as a programmable logic device, and the ProASIC3 family is positioned by Microchip as a cost-effective ASIC replacement for mid-volume designs. Key features include single-chip operation with no external boot device, reprogrammability in-system, live-at-power-up behavior because the flash configuration is immediately available when power is applied, and a low total cost of ownership emphasized by Microchip for the ProASIC3 family. The 256-ball FBGA footprint keeps board area small while still providing 177 usable I/O for glue logic, bus interfacing, and control functions. Architecturally, ProASIC3 devices use Microchip (formerly Actel/Microsemi) third-generation flash FPGA fabric built from VersaTile logic tiles, each configurable as a three-input lookup table equivalent or a D-flip-flop/latch with enable, fabricated on 130 nm flash process technology with a 1.5V core supply. This non-volatile fabric removes the configuration-time vulnerability and standby configuration power typical of SRAM FPGAs. Typical applications include industrial control and automation, networking and communications line cards, consumer equipment, computing platforms, and avionics subsystems where a single-chip, secure, non-volatile programmable fabric is preferred over SRAM-based alternatives. A key design consideration: the -1 speed grade limits maximum fabric performance relative to -2 parts, so verify timing closure at target clock rates before committing; migration within the ProASIC3 family is documented in Microchip application notes. This page synthesizes distributor pricing, drop-in same-footprint alternatives, and practical design notes not found in the manufacturer datasheet, with all data verified as of 2026-08-31.

RFQ پەیوەندی
A3P1000-1FGG256M - ProASIC3 FPGA 1M Gate 256-LBGA | Microchip
A3P1000-1FGG256M

A3P1000-1FGG256M - ProASIC3 FPGA 1M Gate 256-LBGA | Microchip

The Microchip Technology (formerly Microsemi/Actel) A3P1000-1FGG256M is a ProASIC3 flash-based FPGA with approximately 1 million system gates, 11,000 logic elements (LEs), 177 user I/Os, and 147,456 bits of embedded RAM, housed in a 256-ball Fine-Pitch Ball Grid Array (FBGA/LBGA) package supplied in tray packaging. A flash-based FPGA stores its configuration in on-chip flash cells rather than an external configuration PROM. This places the ProASIC3 family in the nonvolatile FPGA hierarchy, below SRAM FPGAs in reconfiguration flexibility but above them in system simplicity: the device powers up instantly as a single-chip solution with no boot device, no configuration bitstream on the board, and inherent resistance to configuration readback. Key features include single-chip, reprogrammable flash fabric, a 1.5V core operating supply, support for 0C to +85C operation (commercial temperature grade per distributor data), and four I/O banks with independent bank voltages for mixed-voltage I/O standards. The VersaTile architecture lets each tile function as a three-input LUT or a D flip-flop/latch with enable, improving logic utilization at low densities. Technically, ProASIC3 uses Microchip's third-generation flash FPGA fabric, achieving system-level performance suitable for glue logic consolidation, interface bridging, and control-plane designs where the low total cost of ownership (TOC) of a single-chip nonvolatile FPGA matters more than raw high-speed serial performance. Typical applications include industrial automation control, power-on instant-on logic in aerospace and defense subsystems, communication interface bridging, and portable instrumentation where board space and configuration memory elimination are priorities. Design consideration: the -1 speed grade is the slowest grade in the A3P1000 family; confirm timing closure for your design in Libero SoC before committing. The FGG256 package routes VCCIBx pins through their corresponding I/O banks, so mixed-standard assignments must respect bank boundaries. This page synthesizes distributor pricing and stock data, drop-in same-package alternatives from the same Microchip ProASIC3 family, and practical design notes not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
A3P1000-1FGG256T - 1M Gate ProASIC3 FPGA | Microchip
A3P1000-1FGG256T

A3P1000-1FGG256T - 1M Gate ProASIC3 FPGA | Microchip

The Microchip Technology A3P1000-1FGG256T is a 1M-system-gate ProASIC3 flash FPGA with 177 user I/Os, 147,456 RAM bits, and 272 MHz maximum system performance, supplied in a 256-ball LBGA (FBGA) package. This device combines non-volatile flash-based configuration with reprogrammability, enabling secure, single-chip FPGA designs without requiring external boot flash. A field-programmable gate array (FPGA) is an integrated circuit that can be configured after manufacturing to implement custom logic functions. Unlike microcontrollers, which execute software sequentially, FPGAs provide massively parallel hardware execution, making them suitable for high-throughput data processing, protocol bridging, and real-time control. The ProASIC3 family sits in the mid-density FPGA segment, balancing logic capacity, I/O flexibility, and low total cost of ownership. Key features of the A3P1000-1FGG256T include 1M system gates (approximately 11 KLE), 177 user I/O pins, 147,456 bits of embedded RAM, and a 272 MHz system performance ceiling. The 1.5 V core and 130 nm CMOS technology deliver competitive static and dynamic power. The flash-based fabric retains configuration on power loss, eliminating the need for a configuration memory device and protecting designs from unauthorized readback. Architecturally, the ProASIC3 family uses Microchip's VersaTile logic element, which can implement both three-input look-up tables and D-flip-flop/latch functions. The A3P1000-1FGG256T supports JTAG programming, in-system programming, and multiple I/O standards. The 256-ball FBGA package provides a compact footprint for space-constrained boards while still offering 177 accessible I/Os. Typical applications include industrial automation, communication infrastructure, avionics, medical imaging, automotive electronics, and test and measurement systems. The integrated RAM and rich I/O count make it well suited for protocol bridging, sensor conditioning, and custom control logic where a soft processor or external memory interface is required. Designers should provide adequate decoupling on every core and I/O supply pin, and should verify I/O standard voltage compatibility before board layout. Because the flash FPGA does not require boot memory, power-up is immediate; however, in-rush current during programming should be considered. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers evaluate the A3P1000-1FGG256T faster.

RFQ پەیوەندی
A3P1000-1FGG484T - Automotive ProASIC3 FPGA | Microchip
A3P1000-1FGG484T

A3P1000-1FGG484T - Automotive ProASIC3 FPGA | Microchip

The Microchip A3P1000-1FGG484T is a ProASIC3 flash-based field-programmable gate array (FPGA) offering 1 million system gates, 11K logic elements, 300 user I/Os, and 147,456 bits of embedded RAM, in a 484-ball FBGA package qualified to AEC-Q100 for automotive applications. A field-programmable gate array is an integrated circuit whose logic fabric can be configured after manufacturing, allowing designers to implement custom digital hardware without a custom ASIC. Unlike microcontrollers, FPGAs execute parallel hardware datapaths with deterministic timing. ProASIC3 is Microchip's flash-based FPGA family, providing non-volatile configuration, instant-on operation, and a single-chip solution with no external boot PROM. In the power management and embedded processing hierarchy, this device sits at the programmable-logic layer, complementing MCUs, DSPs, and ASSPs in mixed-signal systems. Key features of the A3P1000-1FGG484T include 1M system gates, 11K logic elements, 300 user I/Os, 147,456 bits of RAM, 272 MHz system performance, and a 1.5 V core supply. The device is qualified to AEC-Q100, making it suitable for automotive electronics. The 484-ball FBGA package provides a high-density interconnect for complex board-level routing. The flash-based architecture gives instant-on capability and intrinsic design security. Architecturally, ProASIC3 devices use a 130 nm flash CMOS process. The flash cells act as both configuration memory and logic switches, eliminating the need for external configuration devices. This reduces system cost and PCB area while improving security against IP cloning. The VersaTile-based fabric implements combinatorial and sequential logic efficiently. The 300 user I/Os support multiple I/O standards, enabling flexible interfacing to sensors, memories, and communication transceivers. Typical applications include automotive ADAS and infotainment, industrial motor control and factory automation, communications and networking equipment, medical imaging, and aerospace mission systems. For automotive use, the AEC-Q100 qualification and 1M-gate density allow integration of pre-processing and safety logic. In industrial designs, the 300 I/OS and flash instant-on provide reliable, low-latency control. When designing with this FPGA, ensure the 1.5 V core supply is well decoupled with 0.1 uF and 1 uF ceramic capacitors close to each supply ball. Use thermal vias under the BGA to reduce junction temperature. Because the device is flash-based, no external boot PROM is required; however, JTAG programming and in-system reconfiguration should be planned in the schematic. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for sourcing, replacement, and board bring-up.

RFQ پەیوەندی