بەرهەمەکان (210+)

XFL3012-473MEB - 47µH Shielded Power Inductor 460mA | Coilcraft
XFL3012-473MEB

XFL3012-473MEB - 47µH Shielded Power Inductor 460mA | Coilcraft

The Coilcraft XFL3012-473MEB is a 47 µH shielded molded power inductor rated for 460 mA saturation current with a maximum DCR of 1.32 Ω, packaged in a compact 3.0 x 3.0 mm surface-mount 1212 (3030 Metric) footprint. As part of the XFL3012 family of ultra-low-profile molded inductors, the -443MEB suffix indicates 20% inductance tolerance (M) and an RoHS-compliant matte-tin-lead (e)BTE ground finish. The -443 construction uses a magnetic-shielded molded body to minimize stray flux and reduce EMI in dense PCB layouts. A power inductor is a passive component that stores energy in a magnetic field when current flows through its winding, then releases that energy to smooth current ripple in switching converters. The XFL3012 family uses a shielded, molded construction that confines flux inside the package body, allowing the inductor to be placed directly adjacent to noise-sensitive analog circuitry or other inductors without magnetic coupling. Compared to unshielded drum-core inductors, the XFL3012 achieves substantially lower AC losses and reduced audible noise. Key features of the XFL3012-473MEB include a 47 µH nominal inductance measured at 1 MHz and 0.1 Vrms, an Isat of 460 mA (DC current at 25 °C that causes a 30% inductance drop), a maximum DCR of 1.32 Ω, and a self-resonant frequency typically well above the audio band. The molded body is rated for operating temperatures up to +125 °C and is qualified to AEC-Q200 for automotive applications, making the part suitable for powertrain, ADAS, and infotainment power rails. The XFL3012 family is built around a flat-wire winding molded inside a composite magnetic material that simultaneously provides shielding and a mechanically robust body. The resulting part has the lowest profile in Coilcraft's molded power-inductor line, with a maximum seated height of approximately 1.2 mm, enabling placement under low-profile shields and inside compact modules such as wearables and camera PMICs. Typical applications include DC-DC converter output filters in automotive camera and radar PMICs, point-of-load regulators in industrial 24 V systems, Class-D audio amplifier output filtering, and battery-powered portable devices where shielded construction prevents interference with adjacent analog sections. When laying out a PCB, designers should leave at least 1 mm clearance to adjacent inductors and avoid routing high-di/dt traces directly under the part to minimize stray coupling even with the magnetic shield.

RFQ پەیوەندی
XFWCC483201-143 - 14.3µH Receiver Coil | XFMRS
XFWCC483201-143

XFWCC483201-143 - 14.3µH Receiver Coil | XFMRS

The XFMRS XFWCC483201-143 is a 14.3 µH wireless charging receiver coil with a maximum DC resistance of 200 mΩ, supplied in tray packaging. It is designed to receive energy transferred from a compatible wireless charging transmitter and can support applications such as handheld devices, battery-powered products, and wireless power accessories. The verified distributor data identifies this component as a wireless charging coil receiver in the inductors, coils, and chokes product family. A wireless charging receiver coil is an inductive component that captures magnetic energy from a transmitter coil through electromagnetic coupling. Unlike a conventional signal inductor selected primarily for impedance or current filtering, a wireless charging coil is chosen according to its inductance, resistance, coupling behavior, physical dimensions, and compatibility with the transmitter and receiver electronics. The receiver coil is part of a broader wireless power transfer system that includes a transmitter coil, resonant capacitors, a power-management circuit, and a load such as a battery. The verified specification for XFWCC483201-143 includes an inductance of 14.3 µH and a maximum resistance of 200 mΩ. These values are useful initial screening points, but they do not by themselves define charging efficiency, coil geometry, coupling coefficient, current rating, saturation behavior, insulation rating, or thermal performance. Those parameters must be confirmed from the manufacturer datasheet before production release. Distributor listings also identify RoHS compliance and tray packaging, but no verified manufacturer datasheet URL was supplied in the retrieved data. Typical design work should compare the coil against the selected transmitter, receiver IC, resonant network, ferrite or shielding arrangement, PCB geometry, and enclosure. The receiver coil should be positioned so that its magnetic coupling remains repeatable across the product's mechanical tolerances. Changes to nearby conductive parts, metal chassis, ferrite placement, or coil separation can alter effective coupling and charging behavior even when the nominal 14.3 µH value is unchanged. For procurement, distributor listings show multiple quantity breaks, but pricing can change with market conditions and inventory. One distributor lists $15 at 1 unit, $10 at 10 units, $7.50 at 100 units, and $6 at 1,000 units. Another listing reports $13.50 at 1 unit, $9 at 10 units, $6.75 at 100 units, and $5.40 at 1,000 units. These prices are source-specific and should be checked before ordering. This product page consolidates verified distributor specifications, available pricing, sourcing links, application guidance, and design considerations. Because the supplied data does not include a complete manufacturer datasheet or a verified alternative cross-reference, package-specific replacement candidates should not be assumed without engineering validation.

RFQ پەیوەندی