الدوائر المتكاملة

XC7A35T-1FTG256C

XC7A35T-1FTG256C - Artix-7 FPGA, 33K Logic Cells | AMD Xilinx

The AMD Xilinx XC7A35T-1FTG256C is an Artix-7 family Field Programmable Gate Array (FPGA) featuring 33,280 logic cells, 90 DSP slices, 1,800 Kb of block RAM, and 170 user I/Os, housed in a 256-ball FTBGA (FTG256) package measuring 17x17 mm with 1.0 mm ball pitch. Built on TSMC's 28 nm HPL (High-Performance, Low-Power) HKMG process technology, the device operates from a 0.95 V to 1.05 V core supply and supports commercial temperature grade 0C to +85C. An FPGA (Field Programmable Gate Array) is a semiconductor integrated circuit whose digital logic, interconnect, and I/O behavior are configured by the user after manufacture via a hardware description language (HDL) bitstream. FPGAs sit in the broader taxonomy of programmable logic devices alongside CPLDs and are widely used for parallel DSP, custom I/O protocols, and rapid prototyping where ASIC NRE costs are unjustified. The Artix-7 family is positioned as the low-power, cost-optimized member of the Xilinx 7-Series, between the high-performance Virtex-7 and the lower-cost Spartan-6 predecessors. Key features include four GTP transceivers supporting up to 6.6 Gb/s line rates (artix-7 35T family), 5 MMCM/PLL clock management tiles, an integrated 12-bit 1 Msps XADC analog-to-digital converter, and on-chip configuration memory supporting multiple boot modes including SPI, BPI, JTAG, and Master/Slave SelectMAP. The Artix-7 35T variant specifically adds the 4 GTP serial transceivers that the smaller 15T and non-T parts omit. Typical applications include software-defined radio (SDR) leveraging the 90 DSP slices for high-performance modulation and filtering, machine vision and industrial imaging pipelines using parallel sensor interfaces, motor control and industrial drive firmware acceleration, low-cost serial connectivity bridges (PCIe Gen2 endpoint, SFP/QSFP via GTP), and portable/handheld test instrumentation where Artix-7's power efficiency at 100K-200K LUT scale is decisive. The 256-ball FTG256 package is the largest pin-count option for this family outside the 484-ball FBG484. When designing with this device, allocate at least 4 layers and 2 oz copper for power and ground planes to support the simultaneous-switching currents of 170 user I/Os. Decouple each GTP transceiver supply pin (MGTAVCC/MGTAVTT) with 0.1 uF and 4.7 uF ceramic capacitors placed within 5 mm of the BGA ball. Use Xilinx Vivado 2025.2 or later for synthesis and bitstream generation. This page synthesizes distributor pricing, drop-in Artix-7 35T alternatives in the same FTG256 footprint, and practical design notes not consolidated in the manufacturer datasheet.

USD $84.20 متوفر

XC7A35T-1FTG256I

XC7A35T-1FTG256I - 33K Cell Artix-7 FPGA | AMD

AMD XC7A35T-1FTG256I is an Artix-7 field-programmable gate array with 33,280 logic cells, 170 I/Os, 90 DSP slices, and 1.84 Mb of block RAM, operating from 950 mV to 1.05 V in a 256-ball FTBGA package. The device uses 28 nm FPGA technology and is associated with a maximum clock rating of 464 MHz. It is designed for programmable logic, parallel processing, fixed-point signal processing, and embedded control systems where deterministic hardware parallelism is valuable. An FPGA is a reconfigurable semiconductor in the programmable-logic and digital-semiciconductor hierarchy. Unlike a fixed-function microcontroller or DSP, its lookup tables, routing fabric, block RAM, DSP slices, and I/O can be programmed after manufacture. The Artix-7 family combines this programmable architecture with high-speed serial links, analog mixed-signal resources, and a cost-optimized focus on performance per watt. Key features include 33,280 logic cells for combinational and sequential designs, 170 user I/Os for external interfaces, and 90 DSP slices for multiply and accumulate operations. The 1.84 Mb of block RAM provides dedicated on-chip storage, while the 950 mV to 1.05 V core-voltage range supports power-conscious FPGA configurations. Its 256-ball FTBGA package supports dense PCB routing but requires careful via, escape-routing, thermal, and assembly planning. The XC7A35T combines programmable logic, hard DSP blocks, block RAM, memory-mapped resources, and programmable I/O in one device. A 464 MHz associated timing rating provides a useful design target, although achievable system performance depends on the selected clocking resources, timing constraints, routing congestion, memory interfaces, I/O standards, and implemented design. Because the part is an FPGA, both hardware configuration and the device bitstream must be validated as a complete system. Typical uses include industrial control and automation, communications and protocol conversion, instrumentation, embedded video, digital signal processing, and low-power edge systems. The 170 I/Os and 90 DSP slices make the device particularly suitable for designs that combine sensor acquisition, control logic, and real-time arithmetic without relying on several separate programmable devices. The primary design consideration is package implementation. A 256-ball FTBGA demands fine-pitch escape routing, a qualified PCB stack-up, adequate thermal spreading, and assembly processes capable of handling the package geometry. Designers should also confirm the exact power, configuration, and clock requirements against the manufacturer Artix-7 documentation before releasing the schematic or layout. This page consolidates the verified distributor specifications, same-package Artix-7 alternatives, comparative engineering data, and practical implementation guidance. It is intended to help engineers identify the correct FPGA variant, evaluate replacement options, and plan a manufacturable 256-ball BGA design without treating non-identical family members as automatic drop-in replacements.

طلب عرض سعر اتصل بنا

XC7A35T-2CPG236I

XC7A35T-2CPG236I - Artix-7 FPGA 33280 Logic Cells | AMD

The AMD XC7A35T-2CPG236I is an Artix-7 Field Programmable Gate Array (FPGA) from the 7 series family, offering 33,280 logic cells, 2,600 Configurable Logic Blocks (CLBs)/LABs, and 106 user I/O pins. It is housed in a 238-ball LFBGA/CSPBGA package and operates from a 0.95V to 1.05V core supply voltage. This device is designed for low-cost, high-volume applications requiring a balance of logic capacity, DSP capability, and I/O flexibility. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and a hierarchy of reconfigurable interconnects that allow the blocks to be wired together in different configurations. This reconfigurability makes FPGAs ideal for prototyping, low-to-mid volume production, and applications where design updates are expected. The Artix-7 family sits within the broader FPGA hierarchy, positioned as the low-power, low-cost member of the Xilinx 7 series, which also includes the higher-performance Kintex-7 and Virtex-7 families. Key features of the XC7A35T-2CPG236I include 1,843,200 total RAM bits, 106 user I/Os, and support for multiple clock management tiles (CMTs) with MMCM and PLL. The device is part of the Artix-7 series, which is optimized for the lowest power and cost at 28nm, delivering the highest performance-per-watt fabric and AMS integration in a low-cost FPGA. The -2 speed grade indicates a mid-range performance level, while the 'I' suffix denotes an industrial temperature range (-40°C to +100°C). Technically, the Artix-7 architecture is built on a 28nm high-k metal gate (HKMG) process, providing a balance of logic density and power efficiency. The device includes dedicated DSP48E1 slices for signal processing, block RAM for data storage, and SelectIO technology supporting various I/O standards. The 238-ball CSPBGA package measures 17mm x 17mm with a 0.8mm ball pitch, enabling compact PCB designs. Typical applications include motor control, industrial networking, software-defined radio, and video/image processing. The 106 I/Os and 1.8Mbit of block RAM make it suitable for bridging, protocol conversion, and real-time control tasks. The industrial temperature range supports deployment in harsh environments. When designing with this FPGA, careful attention to power supply decoupling is essential. The core voltage (VCCINT) must be clean and stable within 0.95V to 1.05V, and multiple decoupling capacitors should be placed near the device pins to minimize noise and ensure reliable configuration.

طلب عرض سعر اتصل بنا

XC7A35T-2FGG484C

XC7A35T-2FGG484C - Artix-7 FPGA 33280 Cells | AMD

The AMD XC7A35T-2FGG484C is a member of the Artix-7 FPGA family, built on a 28nm process. It features 33,280 logic cells, 250 user I/Os, and 1,843,200 bits of block RAM, all housed in a 484-ball FBGA package. This device is designed for cost-sensitive, high-volume applications that require a balance of logic density, performance, and low power consumption. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. FPGAs are part of the broader category of programmable logic devices, which also includes CPLDs. They are used in a wide range of applications where flexibility, parallel processing, and rapid prototyping are needed, from industrial motor control to communications infrastructure. Key features of the XC7A35T-2FGG484C include 250 user I/Os, 33,280 logic cells, and 1,843,200 bits of block RAM. The -2 speed grade offers a balance between performance and power, making it suitable for many mid-range applications. The 484-ball FBGA package provides a good compromise between I/O count and board area, and is a popular choice for designs that need more I/Os than smaller packages but do not require the density of larger ones. Technically, the Artix-7 family is optimized for the lowest power and cost at 28nm, delivering the highest performance/watt fabric and AMS integration. The device includes hardened memory controllers, DSP slices, and clock management tiles (MMCM and PLL) that support a wide range of system requirements. The 28nm process technology enables high logic density and low static power, which is critical for battery-powered and thermally constrained applications. Typical applications for the XC7A35T-2FGG484C include industrial motor control, software-defined radio, medical imaging, and video processing. Its combination of logic capacity, I/O count, and cost-effectiveness makes it ideal for these and other high-volume, cost-sensitive designs. When designing with this device, careful attention should be paid to power supply decoupling and the configuration interface. The FPGA requires multiple supply rails (VCCINT, VCCAUX, VCCO) and a configuration source (e.g., SPI flash) to boot. Proper decoupling and a clean power-up sequence are essential for reliable operation.

طلب عرض سعر اتصل بنا

XC7A35T-2FGG484I

XC7A35T-2FGG484I - Artix-7 FPGA 33K Logic Cells | AMD

The AMD XC7A35T-2FGG484I is a member of the Artix-7 family of Field Programmable Gate Arrays (FPGAs), built on a 28nm process technology. It features 33,280 logic cells, 250 user I/O pins, and 1,843,200 bits of block RAM, all housed in a 484-ball BGA (FBGA) package. This device is optimized for low power and cost-sensitive applications, delivering high performance per watt in a compact footprint. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence 'field-programmable'. FPGAs are part of the broader category of programmable logic devices (PLDs), which also includes CPLDs. They consist of an array of programmable logic blocks, interconnects, and I/O blocks, allowing for highly flexible digital circuit implementation. FPGAs are widely used in prototyping, signal processing, and applications requiring parallel processing or custom hardware acceleration. The XC7A35T-2FGG484I offers 250 user I/Os, 5 clock management tiles (CMTs) with MMCM and PLL, and 90 DSP slices for digital signal processing. It supports various I/O standards including LVCMOS, LVDS, and HSTL, and includes integrated memory controller support for DDR3. The device operates from a 1.0V core voltage and is available in the industrial temperature grade (-40°C to +100°C). Architecturally, the Artix-7 family uses a 6-input look-up table (LUT) architecture, providing high logic density and performance. The device includes 5 clock management tiles, each containing a mixed-mode clock manager (MMCM) and a phase-locked loop (PLL), enabling flexible clock generation and jitter filtering. The 90 DSP slices support up to 25x18 multipliers, making it suitable for digital signal processing tasks. Typical applications include industrial motor control, software-defined radio, medical imaging, and video processing. The device's low power consumption and cost-effectiveness make it ideal for high-volume applications where performance per watt is critical. When designing with this FPGA, careful attention must be paid to power supply decoupling and PCB layout to ensure signal integrity at high I/O speeds. The device requires multiple supply voltages (VCCINT, VCCAUX, VCCO), and proper sequencing is essential for reliable operation.

طلب عرض سعر اتصل بنا

XC7A35T-2FT256I

XC7A35T-2FT256I - 33,280-LCell Artix-7 FPGA | AMD/Xilinx

The AMD/Xilinx XC7A35T-2FT256I is an Artix-7 field-programmable gate array with 33,280 logic cells, 90 DSP slices, 1,800 Kb of block RAM, and 170 I/O in a 256-ball FTBGA package. Its -2 performance grade supports higher clock speeds than the -1 grade, while the industrial temperature designation extends operation across an extended temperature range. This FPGA combines programmable logic, DSP, block RAM, programmable I/O, and dedicated clocking resources in one device. An FPGA is a reconfigurable semiconductor whose interconnect and logic are defined by a bitstream rather than fixed circuitry. Artix-7 devices occupy the low-cost, low-power portion of the AMD/Xilinx 7-series portfolio and target compact systems requiring substantial parallel processing without the cost and power of larger high-end devices. This places the XC7A35T above a basic programmable-logic device and below larger Artix-7 members in resource capacity. The verified listing identifies 33,280 logic cells, 1,800 Kb of block RAM, 90 DSP slices, 170 I/O, and a 256-LBGA package for the closely identified XC7A35T-2FTG256I listing. Those values position the device for moderate control logic, parallel datapaths, embedded memory, video or image preprocessing, sensor fusion, and communications control. The search data does not explicitly state the target suffix's exact temperature limits, supply rails, maximum clock, or package dimensions, so those values remain marked for verification rather than being inferred. At the system level, the programmable fabric supports parallel datapaths that would require many discrete logic devices, while 90 DSP slices can accelerate multiply-accumulate operations. The 1,800 Kb block RAM provides on-chip storage for buffering, lookup tables, packet queues, and data acquisition. The 170 I/O allow interfaces to external memory, converters, transceivers, displays, and industrial peripherals, subject to the exact bank voltage, pin multiplexing, and I/O-standard constraints listed in the manufacturer documentation. The XC7A35T-2FT256I is suitable for industrial automation, test and measurement, communications infrastructure, embedded vision, and compact edge-processing systems. A board-level migration must preserve the 256-ball footprint, pin functions, supported I/O standards, power rails, configuration interface, memory interface requirements, clocking, and bitstream compatibility. Even when a distributor describes two orderable suffixes as similar, engineers should verify the exact package and temperature suffix before purchasing. A sound design starts with the AMD package pinout files and the Artix-7 documentation, followed by Vivado design constraints and timing analysis. Validate every power rail, decoupling network, configuration scheme, pin placement, and high-speed interface against the exact device suffix. Treat tool-generated timing and utilization results as design-specific measurements rather than guaranteed device specifications. This page consolidates verified source links, exposed uncertainty, pricing context, and engineering-oriented selection guidance. It adds migration and design-risk context beyond a distributor listing while avoiding unverified claims about electrical limits, lifecycle status, compliance, or package pin names.

طلب عرض سعر اتصل بنا

XC7A35T-2FTG256C

XC7A35T-2FTG256C - 33,280-Cell Artix-7 FPGA | AMD

The AMD XC7A35T-2FTG256C is an Artix-7 field-programmable gate array with 33,280 logic cells, 170 listed I/Os, and a 256-ball low-profile BGA package. Built on a 28 nm process, this -2 speed-grade device combines programmable logic with integrated FPGA resources for cost-sensitive embedded, communications, industrial-control, and signal-processing systems. The package is identified as FTG256, also listed as 256-LBGA by the distributor sources. An FPGA is a programmable semiconductor that lets engineers define digital logic, interfaces, control algorithms, and parallel processing functions after manufacture. The Artix-7 family combines configurable logic blocks, programmable I/O, block RAM, digital signal processing resources, and dedicated clock-management blocks on one device. This combination places the XC7A35T-2FTG256C within the FPGA and programmable-logic hierarchy rather than the fixed-function logic-IC or microprocessor categories. The verified listing identifies 33,280 logic cells and a -2 performance grade. Distributor records describe the device as an Artix-7 FPGA in a 256-LBGA package. Published Artix-7 information identifies the family as optimized for low power and cost at 28 nm. One distributor listing also highlights the family's packaging options and ease of migration between compatible family members, although pin assignments and power rails must still be checked against the specific package documents before any substitution is approved. The FTG256 package supports a compact surface-mount implementation while providing numerous programmable connections for external memory, interfaces, clocks, and control peripherals. Because the supplied web data does not include the complete pin table, bank voltage limits, differential I/O standards, or recommended high-speed layout values, those details must be taken directly from AMD's XC7A35T datasheet and package pinout files before schematic or PCB release. Typical design roles include low-cost control logic, parallel data acquisition, sensor aggregation, industrial automation, communications infrastructure, and compact embedded signal processing. The Artix-7 architecture is especially useful where a microcontroller cannot provide sufficient parallel throughput, where logic must be updated after manufacture, or where several fixed-function ICs would otherwise be combined to implement a custom datapath. A critical design practice is to treat every complete XC7A35T-2FTG256C migration as a timing, power, and pinout verification exercise. The -2 speed grade should not be replaced by a -1 grade without checking worst-case timing closure, while larger-density devices in the same package can alter embedded resources even if the footprint remains unchanged. Confirm the exact device, package, temperature grade, and bonding or migration constraints in the AMD documentation. This page consolidates the verified distributor identity, package, logic-cell count, price indication, source links, drop-in candidates, application guidance, and engineering trade-offs. The comparison material is intended to accelerate sourcing while making the remaining datasheet-dependent verification items explicit rather than presenting unsupported assumptions as specifications.

طلب عرض سعر اتصل بنا

XC7A35T-2FTG256I

XC7A35T-2FTG256I - Artix-7 FPGA, 33K LC, 256-FTBGA | AMD Xilinx

The AMD Xilinx XC7A35T-2FTG256I is a member of the Artix-7 family of field programmable gate arrays (FPGAs) built on a 28 nm high-k metal gate (HKMG) process technology, housed in a 256-ball fine-pitch thin BGA (FTBGA) package with -2 speed grade and industrial (-40C to +100C) temperature rating. A Field Programmable Gate Array (FPGA) is a semiconductor device whose logic functionality is defined after manufacturing through a programmable interconnect of configurable logic blocks (CLBs), block RAM, DSP slices, and programmable I/O. Within the broader programmable-logic taxonomy, an FPGA sits between fixed-function ASICs (high NRE, no flexibility) and microcontrollers (sequential execution, limited parallelism). The 7-series Xilinx FPGAs span four sub-families: Spartan-6 (cost-optimized legacy), Artix-7 (lowest power, transceiver-equipped mid-range), Kintex-7 (mid-high performance), and Virtex-7 (highest performance). Key features of the XC7A35T-2FTG256I include 33,280 logic cells distributed across approximately 5,200 6-input LUTs, 1,843,200 bits (230 KB) of block RAM organized as 50 x 36 Kb blocks, and 90 DSP48E1 slices each capable of 25 x 18-bit multiply-accumulate at up to 628 MHz. The device integrates two 10-bit ADCs (1 MSPS), four clock management tiles (CMTs) each containing one MMCM and two PLLs, and supports up to 170 user I/Os in this FTBGA-256 package. The Artix-7 architecture delivers up to 6.6 Gb/s GTP serial transceivers and a hardened memory controller block, achieving approximately 50% lower static power and 35% lower dynamic power than the prior-generation Spartan-6 at equivalent performance. The -2 speed grade positions this part as the middle performance bin (between -1 and -3) for cost-sensitive designs that still require high DSP throughput. Typical applications include high-volume motor control and digital signal processing front-ends, low-cost industrial Ethernet bridges, portable ultrasound and instrumentation front-ends, software-defined radio (SDR) baseband pre-processing, and machine-vision pre-processing pipelines. The combination of GTX transceivers, block RAM, and DSP48E1 slices makes the XC7A35T-2FTG256I well suited for parallel data-path designs with moderate serial connectivity. A key design trade-off when selecting the -2 speed grade is that the LVDS, DDR memory interface rates, and GTP transceiver line rates are constrained relative to the -3 speed grade. Designers targeting the fastest possible DDR3 or GTP line rates may need to upgrade to -3, while those optimizing for cost and still passing timing closure typically stay at -2. The industrial temperature grade extends the operating envelope beyond commercial parts, suitable for factory-floor and outdoor installations. This page aggregates distributor pricing, pin-compatible same-package alternatives, and design-oriented guidance not duplicated in the manufacturer datasheet, including thermal, signal-integrity, and pin-mux considerations for the FTBGA-256 footprint.

USD $31.17 متوفر

XC7A50T-1CS324I

XC7A50T-1CS324I - 52,160 Logic Cell Artix-7 FPGA | AMD

The AMD XC7A50T-1CS324I is an Artix-7 field-programmable gate array with 52,160 programmable logic cells, 210 programmable I/O pins and 2,764,800 RAM bits, supplied in a 324-CSPBGA package. It is built on a 28 nm FPGA process and uses a 0.95 V to 1.05 V core supply. The part is intended for industrial-temperature designs requiring programmable logic, parallel processing, serial connectivity, control, and adaptable hardware integration. An FPGA is a semiconductor whose digital function is defined by loading a configuration bitstream after fabrication. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed during development, revision, or field updates. Artix-7 devices combine programmable logic, configurable I/O, block RAM, digital signal-processing resources, clocking, and memory interfaces in one integrated device. The XC7A50T-1CS324I provides 4,075 configurable logic blocks according to the supplied product data. Its 52,160 logic elements, 2,764,800 RAM bits, and 210 programmable I/O pins make it suitable for embedded control, industrial automation, communications, instrumentation, data acquisition, interface aggregation, and compact custom signal-processing systems. The CSPBGA package supports high-density PCB integration but requires careful escape routing and package-aware layout. The suffix identifies the speed grade, package, and temperature qualification of the selected orderable device. The verified manufacturer-linked data describes a 0.95 V to 1.05 V supply range and an industrial junction-temperature range of -40°C to 100°C. Designers should therefore verify the complete electrical, timing, pinout, power, and configuration requirements against the applicable AMD Artix-7 documentation before schematic capture. Typical design work involves assigning clocking and configuration pins, planning bank-specific supply rails, decoupling the package power balls, routing high-speed interfaces with controlled impedance, and validating the selected configuration bitstream on the finished board. Because FPGA designs depend on device, package, speed grade, and tool settings, a board should not be treated as interchangeable with another FPGA merely because its logic-cell count is similar. This product page consolidates verified source links and package-oriented engineering guidance, while separating unavailable pricing, pin mapping, and detailed timing data instead of estimating them. It supports sourcing and initial design planning for engineers who need an AMD Artix-7 device with 52,160 logic elements, 210 I/O pins, and a 324-CSPBGA package.

طلب عرض سعر اتصل بنا

XC7A50T-1CSG324I

XC7A50T-1CSG324I - Artix-7 FPGA, 52K Logic Cells | AMD

The AMD XC7A50T-1CSG324I is an Artix-7 Field Programmable Gate Array (FPGA) from the 7 series family, designed for cost-sensitive, high-volume applications requiring low power and high I/O density. It features 52,160 logic cells, 2,764,800 bits of total block RAM, and 210 user I/Os, all housed in a compact 15x15mm 324-pin CSPBGA package. This industrial-grade variant operates over the -40°C to +100°C temperature range. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and reconfigurable interconnects, allowing them to implement any digital logic function. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), which are themselves a subset of integrated circuits. This flexibility makes FPGAs ideal for prototyping, low-to-mid volume production, and applications requiring field upgrades. Key features of the XC7A50T-1CSG324I include 52,160 logic cells, 2,764,800 bits of block RAM, 120 DSP slices, and 5 clock management tiles (CMTs) each containing a mixed-mode clock manager (MMCM) and a phase-locked loop (PLL). The device supports a wide range of I/O standards including LVCMOS, LVDS, and HSTL, and features high-speed serial transceivers for gigabit connectivity. The 28nm process technology balances performance with power efficiency. Architecturally, the Artix-7 family is built on AMD's 28nm high-performance, low-power (HPL) process. The device integrates hardened memory controllers, supporting DDR3 and DDR3L, and includes dedicated blocks for PCIe and Ethernet. The configurable logic blocks (CLBs) contain look-up tables (LUTs) and flip-flops, while the DSP48E1 slices enable high-speed arithmetic operations. The device is programmed via SRAM-based configuration, requiring an external configuration source such as a flash memory or a microprocessor. Typical applications include industrial motor control, medical imaging, software-defined radio, and video processing. The 210 user I/Os and 324-pin package make it suitable for board designs where space is at a premium. The industrial temperature grade ensures reliable operation in harsh environments. When designing with this FPGA, careful attention must be paid to power supply decoupling and configuration bitstream storage. The device requires multiple supply rails (VCCINT, VCCAUX, VCCO) and a configuration source. Proper PCB layout, including impedance-controlled traces for high-speed signals, is essential for reliable operation.

طلب عرض سعر اتصل بنا

XC7A50T-1FG484C

XC7A50T-1FG484C - 52K Artix-7 FPGA | AMD | Industrial Control

The AMD XC7A50T-1FG484C is an Artix-7 field-programmable gate array with 52,000 logic cells, 250 I/Os, and a 484-FBGA package, intended for programmable logic, control, interface, and signal-processing designs. The verified listing identifies the device as a 484-BBGA Artix-7 FPGA with 2,764,800 internal configuration bits and 52,160 logic elements. What is an FPGA? A field-programmable gate array is a programmable digital semiconductor that combines configurable logic blocks, programmable interconnect, block RAM, and digital signal processing resources. An Artix-7 FPGA sits within the FPGA hierarchy: FPGA → Artix-7 → Xilinx 7-Series FPGA → programmable logic and embedded-processing platform. Unlike a fixed-function application-specific integrated circuit, an FPGA lets engineers define parallel hardware behavior through HDL, constraints, and device configuration. The XC7A50T family is positioned for cost-sensitive systems that need more parallelism and I/O flexibility than a microcontroller or fixed interface device can provide. The verified distributor information specifically lists 250 I/Os and a 484-BBGA package, making the device relevant to industrial automation, data acquisition, communications, embedded control, and image or video processing systems. The 484-ball package supports dense board routing while providing a substantial external interface count. The -1 speed designation, temperature suffix, and exact electrical limits are not fully specified in the supplied search excerpts. Consequently, operating temperature, I/O standards, core voltage, memory resources, clock-management resources, and power consumption must be confirmed against the AMD Artix-7 data sheet before schematic sign-off. Do not infer those specifications from the distributor title alone. A practical design begins by partitioning the required datapath into parallel pipelines and selecting the smallest Artix-7 resource that satisfies timing, memory, DSP, and I/O constraints. The 250-I/O figure should be mapped against the board-level connector, transceiver, voltage-standard, and clock requirements. Pin assignment, bank voltage planning, configuration pins, decoupling, and power sequencing are more important than treating the FPGA as a generic high-pin-count component. This page consolidates verified distributor identity and package information, separates known facts from missing technical data, and avoids fabricating alternatives or electrical ratings. Engineers should use the official AMD package files and datasheet for final pinout, timing, power, and migration decisions.

طلب عرض سعر اتصل بنا

XC7A50T-1FG484I

XC7A50T-1FG484I - Artix-7 FPGA, 52,160 Cells | AMD

AMD XC7A50T-1FG484I is an Artix-7 field-programmable gate array (FPGA) with 52,160 programmable logic cells, supplied in a 484-BBGA package. The -1 speed grade, -F package designation, and I industrial-temperature suffix identify the ordering variant, while the device provides a 1 V core-related operating point and 28 nm CMOS technology according to the supplied comparison data. The 484-BBGA package provides a high-density ball-grid interface for designs requiring extensive programmable I/O and logic integration. What is an FPGA? A field-programmable gate array is a reconfigurable digital semiconductor in the programmable-logic and FPGA category. Instead of fixing the logic at fabrication, engineers configure an FPGA after manufacture using HDL synthesis, place-and-route tools, and a device bitstream. Within the hardware hierarchy, the XC7A50T belongs to the Artix-7 FPGA family and provides a programmable-logic platform for control, signal processing, communications, and embedded-system logic. The supplied AMD-related search data identifies the device as an Artix-7 FPGA with 52,160 logic cells in a 484-BBGA package. The available comparison data also states 28 nm CMOS technology and a 1 V operating value for the target MPN. The -1 ordering code is commonly used to identify the speed grade, but the supplied data does not provide a complete timing table, I/O standards, block-resource counts, pinout, or absolute maximum ratings. Those parameters must therefore be confirmed against the manufacturer documentation before release. The 484-BBGA package is suited to compact, high-pin-count boards where a large number of package balls are required. Unlike a cross-package replacement, any proposed alternative must use the same package footprint and preserve the relevant ball assignments, voltage requirements, configuration interface, and design-tool compatibility. The supplied cross-reference results identify same-family 484-pin candidates, but they do not provide enough verified detail to establish five unqualified production drop-in replacements. Typical engineering uses include industrial automation, embedded control, sensor and signal-processing front ends, communications infrastructure, and general-purpose digital prototyping. The device should be paired with a validated power architecture, decoupling strategy, clocking plan, configuration memory or boot source, and AMD FPGA implementation flow. Because the provided evidence does not contain the complete pinout or timing specifications, PCB and firmware decisions should not be based on search-result snippets alone. For a new design, the target MPN is best suited when its documented resources, speed grade, temperature range, and package assignments match the design. For an existing PCB, compare the exact package suffix, ball map, core voltage, I/O voltage, configuration pins, memory interfaces, and required IP before considering a replacement. The official AMD Artix-7 package-pinout resources are the authoritative starting point for these checks. This page consolidates the verified search results, package identity, sourcing links, and design cautions for XC7A50T-1FG484I. It also separates documented values from missing engineering data rather than presenting inferred specifications as facts.

طلب عرض سعر اتصل بنا

XC7A50T-2CS325I

XC7A50T-2CS325I - Artix-7 FPGA, 324-LFBGA | AMD

The AMD XC7A50T-2CS325I is an Artix-7 field-programmable gate array (FPGA) in a 324-LFBGA package, with 150 I/O and the industrial -2 speed grade indicated by the ordering code. The verified distributor listing identifies the device as a programmable FPGA and provides the family-level package information, while the Artix-7 data sheet is the authoritative source for electrical, timing, configuration, and environmental details. The package designation CSG325 is used for this 324-LFBGA configuration, and the final G suffix in related AMD/Xilinx catalog listings indicates the same package family notation used by the source data. An FPGA is a programmable digital semiconductor used to implement logic, control, signal-processing, communications, and embedded-system functions in a single integrated device. Xilinx 7 Series FPGAs combine configurable logic blocks, block RAM, digital signal-processing resources, programmable I/O, clock-management resources, and dedicated configuration mechanisms. Artix-7 devices are positioned for low-cost, low-power, and small-form-factor designs, making the XC7A50T useful for industrial control, communications, instrumentation, embedded vision, and compact embedded platforms. The verified data identifies the XC7A50T family and its Artix-7 architecture but does not provide complete electrical tables, timing grades, resource counts, maximum I/O standards, power values, or package dimensions. Those parameters remain marked as needed rather than inferred. The -2 suffix, I suffix, package, and 150-I/O listing are retained exactly as supplied. Engineers should use the AMD Artix-7 data sheet and package pinout files for final timing, electrical, thermal, and land-pattern decisions. The target is suitable when a design needs a moderately capable programmable logic platform and can be implemented in the CSG325 package. Its industrial ordering suffix should be checked against the system environmental requirements. Configuration memory, programming tools, clock sources, I/O voltage domains, and decoupling must be designed around the relevant Artix-7 power architecture rather than inferred from a distributor summary. Unlike a fixed-function ASIC, an FPGA allows logic revisions, parallel interface adaptation, and field-programmable product differentiation. Unlike a microcontroller-only design, it can place multiple deterministic datapaths and control functions beside one another, provided timing closure and resource utilization are verified. This makes XC7A50T-2CS325I relevant to custom controllers, protocol bridges, test systems, and industrial equipment where firmware flexibility and hardware parallelism are both valuable. When selecting or replacing this FPGA, verify the exact package pinout, supported I/O standards, configuration mode, speed grade, temperature grade, supply requirements, and tool compatibility using AMD documentation. The -2CS325I and -2CSG325I ordering strings are related catalog spellings, but a substitution must not be approved from the package name alone. This page combines verified distributor identity, source URLs, application context, and explicit data gaps rather than presenting undocumented specifications as facts.

طلب عرض سعر اتصل بنا

XC7A50T-2CSG324I

XC7A50T-2CSG324I - Artix-7 FPGA, 52K Logic Cells | AMD

The AMD XC7A50T-2CSG324I is a member of the Artix-7 FPGA family, built on a 28nm process technology. It features 52,160 logic cells, 2,764,800 block RAM bits, and 210 user I/O pins, all housed in a 324-ball CSG (CSPBGA) package. This device operates with a core voltage (VCCINT) of 1.0V and is specified for the industrial temperature range (-40°C to +100°C). An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the designer after manufacturing, allowing for custom digital logic implementations. FPGAs sit between ASICs (application-specific) and microprocessors (software-programmable) in the design spectrum, offering hardware-level parallelism and reconfigurability. The Artix-7 family is optimized for low power and cost at 28nm, targeting applications that require high performance per watt without the expense of high-end FPGAs. Key features of the XC7A50T-2CSG324I include 120 DSP48E1 slices for signal processing, 5 clock management tiles (CMTs) with MMCM and PLL, and support for various I/O standards including LVCMOS, LVDS, and HSTL. The -2 speed grade provides a balance of performance and power, with the device supporting configuration via JTAG, SPI, or BPI interfaces. The CSG324 package offers a compact footprint with 324 balls on a 0.8mm pitch, enabling dense PCB layouts. Architecturally, the Artix-7 fabric uses a 6-input look-up table (LUT) architecture with dedicated carry chains, making it efficient for both control logic and datapath designs. The integrated block RAM can be configured in various aspect ratios, and the DSP48E1 slices support multiply-accumulate operations essential for digital signal processing. The device also includes analog-to-digital converter (XADC) functionality for on-chip temperature and voltage monitoring. Typical applications include software-defined radio, motor control, industrial networking, and medical imaging. The combination of low power, moderate logic density, and transceiver-less design makes it suitable for cost-sensitive, high-volume applications where high-speed serial links are not required. When designing with this FPGA, careful attention must be paid to power supply decoupling on VCCINT, VCCBRAM, and VCCO rails, as well as proper configuration pin termination. The device supports partial reconfiguration, enabling dynamic updates to logic functions in the field.

USD $25.45 اتصل بنا

XC7A50T-2CSG325I

XC7A50T-2CSG325I - Artix-7 FPGA 150 I/O | AMD

The AMD XC7A50T-2CSG325I is a member of the Artix-7 FPGA family, designed for cost-sensitive, high-volume applications requiring low power and high performance at 28nm. It features 52,160 logic cells, 150 user I/Os, and 2,764,800 bits of block RAM, all housed in a 324-ball CSBGA package. This device operates from a 1V core supply and supports industrial temperature ranges, making it suitable for a wide range of embedded and communications systems. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and a hierarchy of reconfigurable interconnects that allow the same chip to implement different digital logic functions. FPGAs sit between microcontrollers and ASICs in the design spectrum, offering the flexibility of software with the parallelism of hardware. They are essential in applications where rapid prototyping, hardware acceleration, or in-field updates are required. Key features of the XC7A50T-2CSG325I include 150 user I/Os, 52,160 logic cells, and 2,764,800 bits of block RAM. The device also integrates an XADC block with an on-chip reference circuit (±1%), enabling on-chip monitoring of temperature and power supply rails without external active components. The -2 speed grade provides a balanced performance point for logic and I/O, while the industrial temperature grade (-I) ensures operation from -40°C to +100°C. Technically, the Artix-7 family is built on a 28nm high-k metal gate (HKMG) process, delivering the lowest power and cost at this node. The device supports various I/O standards, including LVCMOS, LVDS, and HSTL, and includes clock management tiles (CMTs) with MMCM and PLL blocks for robust clock generation. The XADC provides a 12-bit, 1 MSPS analog-to-digital converter, useful for system monitoring and control. Typical applications include motor control, industrial networking, software-defined radio, and video processing. The 150 I/Os and 324-ball package make it ideal for mid-density designs where board space is limited. The low power consumption of the Artix-7 family is particularly beneficial in battery-powered or thermally constrained systems. When designing with this device, ensure proper decoupling of the 1V core supply and follow AMD's power-on sequencing guidelines. The configuration bitstream can be stored in external SPI flash or loaded via JTAG, providing flexibility in system design.

طلب عرض سعر اتصل بنا

XC7A50T-2FG484I

XC7A50T-2FG484I - 52,160-L Logic Artix-7 FPGA | AMD

The AMD XC7A50T-2FG484I is an Artix-7 field-programmable gate array (FPGA) with 52,160 logic elements, 250 I/O, and a 484-pin FBGA package. The supplied distributor data identifies the device as a 28 nm CMOS FPGA with a 1 V supply and 2,764,800 logic cells in the associated listing field; the exact interpretation of that field should be confirmed against the manufacturer datasheet. A field-programmable gate array is a programmable-logic semiconductor: configurable logic blocks, digital signal processing resources, block RAM, and programmable I/O are combined on one integrated circuit. An FPGA sits within the broader semiconductor and programmable-logic hierarchy, allowing parallel hardware functions to be implemented and revised without changing the PCB. This makes the Artix-7 family suitable for control, signal processing, communications, and embedded systems where parallel throughput and reconfigurability matter. The XC7A50T-2FG484I combines 52,160 logic elements with 2.64 Mbit embedded memory in the supplied comparison data. Its 484-pin FBGA package provides extensive board connectivity for high-speed interfaces and external memory. The “-2” speed designation and “I” temperature suffix are family ordering codes, but the verified excerpt does not provide complete timing, temperature, or power values; those parameters should be checked in the AMD datasheet before design release. The device is appropriate for industrial automation, robotics, embedded control, communications, instrumentation, and signal-processing designs. Its large I/O count is useful when a design combines multiple parallel buses, high-speed transceivers, DDR memory, clocks, and management signals. Compared with smaller FPGAs, the XC7A50T provides more parallel resources, but its 484-BBGA package requires careful PCB escape routing, thermal planning, and manufacturing control. A key design consideration is package complexity: the dense FBGA footprint demands via-in-pad or via-under-bump considerations, precise ball assignment, and validated manufacturing rules. Power, decoupling, clocking, configuration, and high-speed signal-integrity requirements also depend on the selected board stack-up and the exact I/O standards enabled. This page consolidates verified distributor specifications, package information, source links, and engineering-oriented selection guidance. It distinguishes confirmed values from parameters that require the manufacturer datasheet, avoiding invented electrical or lifecycle claims.

طلب عرض سعر اتصل بنا

XC7A50T-2FGG484I

XC7A50T-2FGG484I - Artix-7 FPGA, 250 I/O | AMD

The AMD XC7A50T-2FGG484I is an Artix-7 Field Programmable Gate Array (FPGA) from the cost-optimized 28nm family, offering 52,160 logic cells, 250 user I/Os, and 2,764,800 bits of block RAM in a 484-ball FBGA (FGG484) package. It operates from a 0.95V to 1.05V core supply and supports industrial temperature range (-40°C to +100°C). An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement arbitrary digital logic functions. FPGAs sit within the broader category of programmable logic devices (PLDs), which are themselves a subset of application-specific integrated circuits (ASICs) but with the key advantage of reconfigurability. The Artix-7 family is positioned as the low-cost, high-performance-per-watt tier within the Xilinx 7-series, balancing logic density, DSP capability, and transceiver performance for cost-sensitive applications. Key features include 150 DSP48E1 slices for high-speed signal processing, 5 clock management tiles (CMTs) with MMCM and PLL, and support for multiple I/O standards including LVCMOS, LVDS, and HSTL. The device integrates analog mixed-signal (AMS) blocks for on-chip voltage and temperature monitoring. The FGG484 package provides a 23x23mm footprint with 1.0mm ball pitch, enabling moderate-density PCB designs without requiring advanced manufacturing processes. Architecturally, the Artix-7 fabric is built on a 28nm high-k metal gate (HKMG) process, delivering up to 2.9 Tb/s of aggregate I/O bandwidth. The configurable logic blocks (CLBs) contain 8 6-input LUTs and 16 flip-flops each, providing flexible logic implementation. The block RAM is organized as 36Kb dual-port blocks that can be cascaded or split into two independent 18Kb blocks, supporting various memory configurations. Typical applications include motor control, industrial networking, software-defined radio, medical imaging, and low-cost video processing. The 250 I/Os and 150 DSP slices make it well-suited for real-time signal processing and interface bridging. The industrial temperature grade ensures reliable operation in harsh environments. When designing with this device, ensure adequate decoupling on all power rails (VCCINT, VCCAUX, VCCO) and follow AMD's power-on sequencing requirements. The configuration bitstream can be stored in external SPI flash or loaded via JTAG, with support for multi-boot and fallback configurations.

طلب عرض سعر اتصل بنا

XC7A50T-2FT256I

XC7A50T-2FT256I - 52,160 Logic Cell Artix-7 FPGA | AMD

The AMD Xilinx XC7A50T-2FT256I is an Artix-7 field-programmable gate array (FPGA) with 52,160 logic elements, 170 user I/O, and 2,764,800 total RAM bits in a 256-FTBGA package. It is designed for cost-sensitive, high-volume embedded systems requiring programmable logic, parallel interfaces, control, and signal processing. The verified distributor listing identifies it as a 256-LBGA FPGA, while the package nomenclature uses 256-FTBGA. An FPGA is a programmable semiconductor containing configurable logic blocks, programmable interconnect, block RAM, and input/output resources. Unlike a fixed-function application-specific integrated circuit, an FPGA permits logic changes through a programmable configuration while retaining the same board-level package and pin assignment. The Artix-7 family positions the XC7A50T between larger programmable-logic devices and lower-capacity FPGA options. The XC7A50T-2FT256I provides 52,160 logic elements, 4,075 logic array blocks according to the verified product description, 2,764,800 RAM bits, and 170 user I/O. These resources support control logic, data acquisition, protocol bridging, industrial automation, embedded vision, communications, and general-purpose accelerator designs. The exact speed grade, temperature grade, and complete timing specifications are identified by the part-number suffix and must be checked against the AMD Artix-7 datasheet. The 256-FTBGA package is a surface-mount ball-grid-array package intended for multilayer PCB designs. Because the device has many power, ground, configuration, and user-I/O balls, board layout, decoupling, thermal management, and high-speed routing are critical. AMD also provides package pinout files in TXT and CSV formats, with the format described by UG475. Typical implementations use XC7A50T-2FT256I in industrial controllers, camera and image-processing front ends, communication gateways, sensor fusion, test equipment, and embedded compute systems. Designers should use the package pinout file and device-specific constraints to validate every ball assignment, power rail, configuration interface, and I/O standard before fabrication. This page consolidates verified distributor references, package information, design constraints, and practical procurement guidance. It does not invent timing, electrical, lifecycle, or compliance values that were not present in the supplied data.

طلب عرض سعر اتصل بنا

XC7A75T

XC7A75T - Artix-7 FPGA 75K Logic Cells, 6.6Gb/s | AMD

The AMD (Xilinx) XC7A75T is an Artix-7 family field-programmable gate array built on a 28nm HKMG process, providing 75,520 logic cells, 1,800 Kb of block RAM, 5 clock management tiles (each with an MMCM and PLL), 6 GTP transceivers rated to 6.6 Gb/s, and up to 285 user I/Os in packages such as the FGG484 (484-ball BGA) and FTG256 (256-ball BGA). An FPGA (Field-Programmable Gate Array) is a programmable logic device configured after manufacturing to implement arbitrary digital logic. Within the semiconductor hierarchy, FPGAs sit between ASICs and general-purpose processors, offering reconfigurability, parallel processing, and rapid prototyping. The Artix-7 family is AMD's lowest-power, lowest-cost 28nm FPGA line, optimized for highest performance per watt with integrated analog mixed-signal (AMS) capability. Key differentiating features include DSP48E1 slices for high-speed arithmetic, an XADC dual 12-bit ADC for on-chip temperature and voltage monitoring, support for LVCMOS, LVDS, and HSTL I/O standards, and GTP transceivers supporting PCIe, Gigabit Ethernet, and Serial RapidIO protocols. Architecturally, the device comprises configurable logic blocks (CLBs) of 6-input LUTs and flip-flops, column-based block RAM, and dedicated clocking fabric. The 28nm process reduces dynamic power versus older 40nm/65nm generations, while bitstream encryption protects IP. Configuration is supported via JTAG, SPI, or BPI flash. Typical applications include software-defined radio (baseband processing with high-speed ADC/DAC interfacing), motor control, medical imaging, and industrial networking where moderate logic density plus 6.6 Gb/s serial connectivity is required at low cost. Design tip: implement with the Vivado Design Suite, decouple each VCCO/VCCAUX pin with 100nF ceramics, and follow UG475/UG482 layout guidelines for transceiver routing. Pricing below reflects distributor data as of 2026-08-29.

طلب عرض سعر اتصل بنا

XC7A75T-1CS324I

XC7A75T-1CS324I - 75,520-LE Artix-7 FPGA | AMD | Industrial

The AMD XC7A75T-1CS324I is an Artix-7 field-programmable gate array with 75,520 logic elements, a 210 mm² die, and a 324-ball LFBGA package. The “-1” speed grade and industrial-temperature suffix are identified by the order code, while the verified distributor listing supplies the exact family, logic-cell, die-size, and package data. The device belongs to the FPGA and programmable-logic hierarchy, combining configurable digital logic, block RAM, DSP resources, programmable I/O, and high-speed serial transceivers. An FPGA is a semiconductor whose digital behavior is defined after manufacture by loading a configuration bitstream. Unlike a fixed-function application-specific integrated circuit, an FPGA can implement parallel processing, control logic, interfaces, and signal-processing pipelines in one integrated device. The Artix-7 family targets cost-sensitive embedded systems where programmable logic, processing throughput, and compact integration are more important than the very high performance associated with larger FPGA families. The verified listing identifies 75,520 logic elements, a 210 mm² die, 3,870,720 embedded-memory bits, a 324-LFBGA package, and a ball-terminal package format. Other technical details—including logic-cell composition, block-RAM and DSP counts, I/O counts, transceiver quantities, voltage rails, power consumption, and performance timing—were not included in the supplied excerpts and therefore require confirmation from AMD’s complete Artix-7 documentation. Typical uses for this device include industrial automation, motor and motion control, sensor acquisition, communications, embedded vision, test equipment, and digital signal processing. Parallel datapaths can accelerate filtering, control loops, protocol handling, and sensor fusion, while block RAM supports local buffering and DSP resources can implement fixed-point or floating-point arithmetic. A final design must still verify the exact Artix-7 resource mix, transceiver requirements, pin constraints, and timing against the selected board revision. A critical design step is assigning every external signal to the correct 324-ball package ball and obtaining the matching package pinout file before schematic capture. Designers should also verify configuration memory connections, bank supply voltages, decoupling, clocking, transceiver usage, and thermal performance. A bitstream compiled for the exact MPN should be validated on the intended hardware before production. This page consolidates the verified distributor identity, package information, sourcing links, comparison framework, and engineering cautions. It deliberately does not infer missing electrical or resource details, allowing engineers to distinguish confirmed facts from parameters that still require manufacturer-document review.

طلب عرض سعر اتصل بنا

XC7A75T-1FGG484I

XC7A75T-1FGG484I - 75,520-Cell Artix-7 FPGA | AMD

AMD XC7A75T-1FGG484I is an Artix-7 field-programmable gate array with 75,520 logic cells, 285 I/O, 464 MHz performance, MMCM and PLL resources, and an FCBGA-484 package. The device operates from a 950 mV to 1.05 V core supply according to the verified distributor and manufacturer-family data. An FPGA is a reconfigurable semiconductor used to implement digital logic, signal processing, control, and communication functions after a design is loaded into programmable configuration memory. In the product hierarchy, the XC7A75T belongs to the Artix-7 FPGA family, combining programmable logic, fixed resources, high-speed I/O, block RAM, and clock-management circuitry in one surface-mount device. The XC7A75T provides 75,520 configurable logic cells and 285 I/O in the 484-ball FCBGA package. Its stated 464 MHz performance is useful for control logic, embedded processing, sensor aggregation, industrial communication, and general-purpose digital prototyping. Integrated MMCM and PLL resources support clock generation and phase-related functions required by high-speed interfaces and time-sensitive designs. The -1 ordering designation identifies the performance grade, while FGG484 identifies the 484-ball fine-pitch BGA package and I identifies the associated temperature-grade option. Because the verified results do not provide the complete device pin table, detailed electrical tables, power coefficients, or package dimensions, designers should confirm those values against the AMD Artix-7 documentation before release, safety qualification, or production control. Typical applications include industrial automation, embedded control, test and measurement, communications equipment, low-cost prototyping, and data-acquisition systems. The large I/O count allows multiple external interfaces to be connected, while MMCM and PLL resources help establish internal clock domains. The FCBGA-484 package requires careful PCB layout, thermal analysis, and assembly process control. A key design consideration is that its 484-ball BGA footprint provides extensive connectivity but demands advanced board-level design. Use manufacturer-provided package files, keep high-speed routes controlled, provide robust power and ground distribution, and verify BGA assembly capability with the selected PCB supplier. The -1 speed grade should be selected against the complete timing, power, and temperature requirements of the target design. This page consolidates the verified distributor specifications, package identity, source links, replacement considerations, and practical implementation guidance. It also distinguishes true package-compatible FPGA alternatives from parts with different ball counts or device resources, helping engineers narrow a replacement without overlooking bitstream, timing, and qualification constraints.

طلب عرض سعر اتصل بنا

XC7A75T-1FGG676C

XC7A75T-1FGG676C - 75,520-Cell Artix-7 FPGA | AMD

AMD XC7A75T-1FGG676C is an Artix-7 field-programmable gate array with 75,520 programmable logic cells, 300 I/O, a 1 V supply range, and a 676-ball FBGA package. It is built on 28 nm CMOS technology and targets designs requiring dense programmable logic, high-speed digital processing, and flexible I/O without the cost and complexity of a larger FPGA family. The -1 designation identifies the device speed grade, while FGG676 identifies its 676-ball fine-pitch BGA package. An FPGA is a programmable digital semiconductor whose configurable logic blocks, routing fabric, block RAM, DSP resources, and I/O can be adapted to a wide range of digital functions. Within the semiconductor hierarchy, the XC7A75T is an Artix-7 FPGA, combining programmable logic, programmable I/O, embedded memory, DSP processing, clock management, and high-speed serial transceiver resources. This integration allows control, data acquisition, signal processing, and communication functions to be implemented in one device. Key features include 75,520 logic cells, 300 I/O, a 0.95 V to 1.05 V operating-voltage range, and operation up to 85 °C. The Artix-7 architecture uses 28 nm CMOS technology and supports clocking resources including MMCM and PLL blocks. Its combination of logic density, memory, DSP capability, and I/O availability makes it useful for industrial controls, test equipment, embedded processing, communications, and signal-processing systems. The device provides programmable logic blocks connected by an adaptive routing network, along with dedicated block RAM, DSP slices, clock-management resources, and high-speed I/O. The verified part data identifies a maximum clock frequency of 1098 MHz, although practical interface timing depends on the selected I/O standard, clock topology, speed grade, board implementation, and external components. Configuration, power sequencing, clocking, and decoupling must follow AMD guidance for the selected Artix-7 package. Typical applications include industrial automation controllers, programmable measurement systems, embedded video and image-processing pipelines, communication gateways, and digital signal-processing platforms. The 300 available I/O support interfaces to external converters, memory, transceivers, and control logic, while 75,520 logic cells provide substantial parallel-processing capacity. The integrated DSP and memory resources can accelerate filtering, waveform generation, and data-shaping functions. Designers should allocate the FBGA676 footprint and its ball grid carefully, provide stable power rails and high-quality decoupling, and follow the official Artix-7 package-pinout and PCB-design guidance. Clock inputs and high-speed interfaces require controlled impedance routing. Because FPGA routing and configuration affect timing closure, the final design must be validated with the appropriate AMD Vivado tools, device files, and timing constraints. This page consolidates verified device attributes, distributor sourcing information, strict same-package drop-in alternatives, application guidance, and design cautions. It also distinguishes exact ordering-code changes from true pin-compatible replacements so engineers can migrate a 676-ball Artix-7 design without overlooking speed grade or temperature-range differences.

طلب عرض سعر اتصل بنا

XC7A75T-1FGG676I

XC7A75T-1FGG676I - 75,520-Cell Artix-7 FPGA | AMD

The AMD XC7A75T-1FGG676I is an Artix-7 field-programmable gate array (FPGA) with 75,520 logic cells, 300 I/O pins, 200 MHz maximum device performance, and a 676-ball FBGA package. It is a programmable digital semiconductor used to implement parallel logic, DSP processing, control functions, and high-speed interface logic in one reconfigurable device. The device is manufactured using 28 nm CMOS technology and operates from a 0.950 V to 1.05 V core supply according to the verified distributor and datasheet-search data. The “-1” speed designation identifies the target device performance grade, while “FGG676” identifies the 676-ball package configuration and “I” identifies the industrial temperature grade. The XC7A75T belongs to the Artix-7 FPGA family, a cost-optimized product line positioned between low-end programmable logic and higher-density programmable SoC devices. An FPGA is a reconfigurable digital integrated circuit whose internal logic blocks, programmable interconnect, block RAM, and DSP resources can be configured after manufacture. In the product hierarchy, an FPGA is a semiconductor and programmable logic device; the Artix-7 family provides a balance of logic density, performance-per-watt, DSP capability, and cost. The XC7A75T is larger than smaller Artix-7 devices while remaining within a 676-ball FBGA footprint that provides substantial I/O and power connectivity. Verified data identifies 75,520 logic cells, 300 I/O pins, MMCM and PLL resources, 200 MHz device performance, and a 1 V operating range for this part. These resources support parallel datapath designs, digital control, communications, signal processing, and embedded system control. The 300 available I/O pins are particularly useful when a design requires multiple buses, memory interfaces, high-speed transceivers implemented in fabric, or external peripheral connectivity. The MMCM and PLL resources allow designs to derive or distribute clock signals when the design requires controlled frequency relationships. The 28 nm CMOS implementation supports a compact, power-efficient solution for designs needing more parallel processing than discrete logic can provide. Configuration determines the implemented circuit, allowing design revisions and product-family flexibility without changing the PCB. In a prototype, the FPGA can support multiple functions concurrently, such as control logic, data acquisition, DSP filtering, and communication formatting. This integration reduces the number of separate programmable components, although the exact internal resource allocation depends on the selected design and tool configuration. Typical applications include industrial automation and factory control, robotics, communications infrastructure, instrumentation, medical monitoring, and embedded control systems. The XC7A75T is also appropriate for education, prototyping, and research environments where designers need access to a relatively high density of programmable logic and DSP resources. These uses benefit from parallel processing and the ability to implement multiple data paths without requiring a separate processor for every function. The key design consideration is package and power planning. A 676-ball FBGA device requires careful PCB layout, power delivery, thermal management, and high-density manufacturing capability. Designers should use the AMD package pinout files and the appropriate device documentation to verify ball assignments, decoupling, configuration interfaces, and I/O constraints. This page combines verified distributor specifications, pricing references where available, package information, and practical migration guidance for engineers evaluating the XC7A75T.

طلب عرض سعر اتصل بنا

XC7A75T-2CSG324I

XC7A75T-2CSG324I - 628 MHz Artix-7 FPGA | AMD

AMD XC7A75T-2CSG324I is an Artix-7 field-programmable gate array with 75,520 logic cells, 210 I/O, a 628 MHz operating frequency, and a 324-LFBGA CSPBGA package. The -2CSG324I suffix identifies the device family, speed grade, CSG324 package, and industrial temperature option. This combination of programmable logic resources, parallel and serial interface capability, and a high-pin-count ball-grid package makes the device suitable for embedded processing, industrial control, communications, and test systems. An FPGA is a programmable semiconductor in the broader category of programmable logic devices. Unlike a fixed-function application-specific integrated circuit, an FPGA allows logic, interfaces, and signal-processing functions to be configured after manufacture. Within the product hierarchy, XC7A75T-2CSG324I is an Artix-7 FPGA, a member of the AMD Xilinx FPGA family and the broader field-programmable gate array category. The CSG324 package integrates 324 contacts in a compact surface-mount CSPBGA form. Key device features include 75,520 logic cells, 210 I/O, and a maximum stated operating frequency of 628 MHz for the -2 speed grade. The device also includes the clock-management resources and programmable logic expected in an Artix-7 FPGA. These resources allow parallel sensor acquisition, control logic, protocol bridging, DSP-oriented arithmetic, and external memory or communications interfaces to be consolidated in one programmable device rather than implemented across several fixed-function components. The -2 designation denotes a faster speed grade than the -1 option and a lower speed grade than the -3 option represented in the verified comparison data. The 324-CSG package preserves the same physical footprint across the listed XC7A75T variants, allowing design reuse when changing speed grade or temperature grade. Any substitution must still be checked for timing closure, pinout, power configuration, resource utilization, device identification, and intended operating-temperature requirements. Typical applications include industrial instrumentation, factory automation, communication gateways, embedded vision interfaces, low-power edge processing, and programmable logic test equipment. In these systems, the FPGA can implement acquisition pipelines, protocol state machines, digital signal processing, control interfaces, and boot or flash-control functions. The 210-I/O count is particularly useful when a design needs substantial parallel connectivity to sensors, converters, transceivers, and memory devices. Designers should complete timing analysis after selecting the final speed grade and should verify the power rails, decoupling, pin constraints, and configuration interface against the manufacturer datasheet. Replacing an existing CSG324 board with another XC7A75T grade may preserve the footprint, but it does not automatically preserve timing margins, temperature coverage, radiation-test status, or the exact power envelope. This page consolidates verified distributor specifications, same-family drop-in candidates, package information, and practical replacement guidance. The comparison material is intended to accelerate engineering selection while clearly separating confirmed values from parameters that still require verification from the manufacturer datasheet.

طلب عرض سعر اتصل بنا

الفئات الفرعية

المنتجات (35,000+)

XC7A35T-1FTG256C - Artix-7 FPGA, 33K Logic Cells | AMD Xilinx

XC7A35T-1FTG256I - 33K Cell Artix-7 FPGA | AMD

XC7A35T-2CPG236I - Artix-7 FPGA 33280 Logic Cells | AMD

XC7A35T-2FGG484C - Artix-7 FPGA 33280 Cells | AMD

XC7A35T-2FGG484I - Artix-7 FPGA 33K Logic Cells | AMD

XC7A35T-2FT256I - 33,280-LCell Artix-7 FPGA | AMD/Xilinx

XC7A35T-2FTG256C - 33,280-Cell Artix-7 FPGA | AMD

XC7A35T-2FTG256I - Artix-7 FPGA, 33K LC, 256-FTBGA | AMD Xilinx

XC7A50T-1CS324I - 52,160 Logic Cell Artix-7 FPGA | AMD

XC7A50T-1CSG324I - Artix-7 FPGA, 52K Logic Cells | AMD

XC7A50T-1FG484C - 52K Artix-7 FPGA | AMD | Industrial Control

XC7A50T-1FG484I - Artix-7 FPGA, 52,160 Cells | AMD

XC7A50T-2CS325I - Artix-7 FPGA, 324-LFBGA | AMD

XC7A50T-2CSG324I - Artix-7 FPGA, 52K Logic Cells | AMD

XC7A50T-2CSG325I - Artix-7 FPGA 150 I/O | AMD

XC7A50T-2FG484I - 52,160-L Logic Artix-7 FPGA | AMD

XC7A50T-2FGG484I - Artix-7 FPGA, 250 I/O | AMD

XC7A50T-2FT256I - 52,160 Logic Cell Artix-7 FPGA | AMD

XC7A75T - Artix-7 FPGA 75K Logic Cells, 6.6Gb/s | AMD

XC7A75T-1CS324I - 75,520-LE Artix-7 FPGA | AMD | Industrial

XC7A75T-1FGG484I - 75,520-Cell Artix-7 FPGA | AMD

XC7A75T-1FGG676C - 75,520-Cell Artix-7 FPGA | AMD

XC7A75T-1FGG676I - 75,520-Cell Artix-7 FPGA | AMD

XC7A75T-2CSG324I - 628 MHz Artix-7 FPGA | AMD