المنتجات (46,000+)

STM32F439IGT6 - 180MHz ARM MCU 1MB Flash LQFP-176 | STMicroelectronics
STM32F439IGT6

STM32F439IGT6 - 180MHz ARM MCU 1MB Flash LQFP-176 | STMicroelectronics

The STMicroelectronics STM32F439IGT6 is a high-performance ARM Cortex-M4 32-bit microcontroller with FPU and DSP instructions, operating at up to 180 MHz and delivering 225 DMIPS / 1.25 DMIPS/MHz. It integrates 1 MB of on-chip Flash plus 4 KB EEPROM, 256 KB SRAM, and a rich connectivity block including USB 2.0 OTG FS+HS, CAN 2.0B, Ethernet MAC, and an integrated crypto/hash accelerator in a 176-pin LQFP (24x24 mm) package. This device also features a TFT LCD controller, Chrom-ART graphics accelerator, and an 8- to 14-bit camera interface, making it a strong choice for embedded graphics and HMI. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core designed by ARM for embedded applications, featuring built-in single-precision floating-point unit (FPU), DSP extensions, and optional memory protection unit (MPU). The Cortex-M4 belongs to the Cortex-M family (M0/M0+/M3/M4/M7) and traces its lineage to the ARMv7-M architecture, sitting in the hierarchy MCU -> 32-bit MCU -> Cortex-M -> Cortex-M4. It targets deterministic real-time control with low interrupt latency and is the workhorse of STMicroelectronics' STM32F4 series of mainstream microcontrollers. Key features of the STM32F439IGT6 include 1 MB Flash, 256 KB SRAM, 4 KB backup SRAM, up to 17 timers, three 12-bit ADCs with 2.4 MSPS, two 12-bit DACs, an SDIO interface, FSMC/SRAM/NOR/NAND memory controller, and an integrated crypto/hash (SHA-256, AES-256) accelerator. The TFT LCD controller supports up to XGA resolution, and the Chrom-ART engine accelerates 2D graphics operations in hardware, offloading CPU cycles. The device operates from 1.8-3.6 V with an internal LDO and supports four low-power modes (Sleep, Stop, Standby, VBAT) for battery-powered designs. Architecturally, the STM32F439IGT6 uses a Harvard-bus Cortex-M4 with single-cycle MAC, hardware divide, and tightly-coupled memory for deterministic interrupt response. The 7-layer AHB/APB bus matrix with multiple DMA controllers (two DMA1+DMA2 general-purpose plus dedicated MDMA) enables concurrent peripheral-to-memory transfers without CPU intervention. Crypto operations are offloaded to a dedicated engine supporting AES-256, TDES, SHA-1/MD5/SHA-256, and a true random number generator (TRNG) suitable for TLS/IPsec key material. Typical applications for the STM32F439IGT6 include industrial HMI panels with TFT displays, motor control drives, medical instrumentation requiring high-speed ADC acquisition, barcode scanners with camera input, smart-home gateways with Ethernet/USB-OTG, and point-of-sale (POS) terminals. The integrated TFT controller plus crypto accelerator make it a one-chip solution for graphical network units. When designing with this part, plan the 176-pin LQFP layout on a 4-layer or higher PCB with short, impedance-controlled traces for the external memory bus. The 24x24 mm body requires clearance for the 0.5 mm pitch pads; reflow profile must follow JEDEC J-STD-020 MSL-3 handling. Ensure VBAT is correctly backed up for RTC retention and that VDDA/VREF+ are filtered to keep ADC performance at high levels. This page consolidates distributor pricing, drop-in same-package cross-references, and practical layout/thermal guidance not always presented together in the manufacturer datasheet.

طلب عرض سعر اتصل بنا
STM32F439IIH6 - 180MHz Cortex-M4 MCU | STMicroelectronics
STM32F439IIH6

STM32F439IIH6 - 180MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F439IIH6 is a 32-bit Arm Cortex-M4 microcontroller operating at up to 180 MHz, with 2 MB of Flash memory, 256 KB of RAM, and a 176+25-ball UFBGA package measuring 10 mm by 10 mm. The Cortex-M4 core includes single-precision floating-point hardware and DSP instructions for efficient control, signal-processing, and communications workloads. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one package. The STM32F4 family occupies the microcontroller level of the embedded hierarchy: STM32F4 device -> 32-bit microcontroller -> Arm Cortex-M4 processor -> embedded semiconductor. Devices in this family are used where deterministic control, efficient real-time execution, and a compact integrated design are more important than the high compute density of an application processor. The STM32F439IIH6 combines a 180 MHz maximum operating frequency with 2 MB of Flash and 256 KB of RAM. Its single-precision FPU accelerates floating-point calculations, while the Cortex-M4 DSP instruction set supports signal-processing workloads. The 176+25 UFBGA arrangement supports compact PCB layouts, although its fine ball pitch requires careful assembly, inspection, and PCB layout practices. The STM32F439xx family combines the Cortex-M4 processing core with extensive embedded peripherals, including general-purpose timers, communication interfaces, GPIO, and low-power management features. Its 180 MHz operating ceiling provides additional performance headroom for control loops and protocol handling, while the FPU reduces the computational cost of filtering, sensor conditioning, and motor-control calculations. Typical uses include industrial automation and factory equipment, industrial networking, audio and digital signal processing, medical monitoring, and connected sensor systems. In a motor-control design, the device can combine timer-based PWM generation with fast GPIO control and FPU-assisted control algorithms. For networked equipment, its Cortex-M4 performance and large Flash capacity help support protocol stacks and application firmware within a single compact device. Board design requires strict attention to the UFBGA escape routing and power distribution. Place decoupling capacitors adjacent to the relevant supply pins, preserve the manufacturer's recommended layout and stack-up constraints, and validate soldering-process capability before production. Firmware should use the STM32CubeMX configuration tools and the appropriate STM32Cube HAL or LL drivers for initialization and peripheral control. This page combines manufacturer specifications, package and memory details, sourcing information, practical application guidance, and a conservative comparison of same-family drop-in candidates. It also distinguishes electrically similar options from replacements that may require firmware, peripheral, qualification, or PCB validation.

طلب عرض سعر اتصل بنا
STM32F439IIT6 - 180MHz Cortex-M4 MCU | ST | Industrial
STM32F439IIT6

STM32F439IIT6 - 180MHz Cortex-M4 MCU | ST | Industrial

The STMicroelectronics STM32F439IIT6 is a high-performance 32-bit Arm Cortex-M4 microcontroller with a maximum clock frequency of 180 MHz, 2 MB of embedded Flash memory, and a 176-pin LQFP package measuring 24 mm by 24 mm. It combines a single-precision floating-point unit and DSP instruction support with extensive connectivity and peripheral resources for industrial embedded systems. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and interface controllers on one semiconductor device. The STM32F4 series belongs to the hierarchy of 32-bit RISC microcontroller, Arm Cortex-M4 processor, embedded control IC, and semiconductor. The Cortex-M4 architecture combines deterministic instruction execution with efficient digital signal processing, making it suitable for connected industrial equipment, control panels, communications equipment, and human-machine interfaces. The STM32F439IIT6 provides 2 MB of Flash memory, 225 DMIPS of processing performance, and an Arm Cortex-M4 core operating up to 180 MHz. Its integrated connectivity includes Ethernet, USB OTG, and an LCD-TFT controller. These functions reduce the need for discrete communication and display interface components while supporting firmware-intensive networking, graphics, data acquisition, and supervisory-control applications. The device supports 3.3 V and 5 V supply arrangements identified for this part, while its Arm Cortex-M4 processor includes a single-precision FPU and a complete set of DSP instructions. The 176-pin LQFP package exposes substantially more I/O than smaller microcontroller packages, supporting simultaneous peripheral connections and external memory or display interfaces. Exact pin functions, memory-map details, and electrical limits should be assigned from the STMicroelectronics pin-description table in datasheet DM00077036. Typical uses include industrial Ethernet gateways, USB-connected data loggers, programmable logic controllers, motor and process controllers, medical monitoring equipment, and TFT-based human-machine interfaces. The 180 MHz core and DSP capability support real-time control loops, protocol processing, and signal filtering, while the large Flash capacity accommodates networking stacks, graphical interfaces, and field-upgradeable application firmware. The primary design consideration is PCB density around the 176-pin LQFP footprint. Place decoupling capacitors at each appropriate supply pin, route high-speed communications away from sensitive analog inputs, and use solid ground-plane continuity beneath the device. Confirm oscillator, reset, boot, and programming interfaces against the manufacturer datasheet before schematic release or PCB layout. This page consolidates the manufacturer specifications, exact-source pricing eligibility, same-package replacement analysis, interface comparisons, and practical design guidance needed to evaluate the STM32F439IIT6 for a new embedded platform.

طلب عرض سعر اتصل بنا
STM32F439NGH6 - 180MHz 1MB MCU | STMicroelectronics
STM32F439NGH6

STM32F439NGH6 - 180MHz 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F439NGH6 is a 32-bit Arm Cortex-M4 microcontroller operating at up to 180 MHz, with 1 MB of embedded flash, in a 216-TFBGA package measuring 13 x 13 mm. It combines a high-performance Cortex-M4 core with extensive connectivity and multimedia-oriented peripherals for industrial control, embedded networking, human-machine interfaces and connected equipment. A microcontroller is a programmable system-on-chip that integrates a processor core, memory and peripheral interfaces onto one package. Within the hierarchy of semiconductor devices, the STM32F439NGH6 belongs to the ARM Cortex-M microcontroller family and the STM32F4 series, combining real-time processing, flash program memory and integrated communication peripherals on a single surface-mount device. Three headline characteristics define this part: a 180 MHz maximum operating frequency, 1 MB of flash memory, and a compact 216-TFBGA package. Its 32-bit RISC architecture supports efficient control-loop and signal-processing workloads, while the large embedded flash capacity allows substantial application code, configuration data, bootloader logic and graphical assets to be stored directly on the chip. The STM32F439NGH6 is built for applications requiring more peripheral integration than entry-level Cortex-M devices. Its feature set is suited to Ethernet-connected control equipment, industrial gateways, motor and motion control, instrumentation, audio and multimedia control, and external storage or display interfaces. Operating from a 2.5 V or 3.3 V supply, the device supports integration into both industrial and embedded consumer platforms. The 216-TFBGA construction offers a high pin count for parallel and high-speed peripheral access, but it also demands careful PCB layout and assembly planning. Designers should provide the decoupling, power, clock and signal-integrity arrangements specified by the manufacturer datasheet. Because the package has fine-pitch balls and a large thermal footprint, prototype assembly and inspection require suitable board-level process capability. A key design consideration is the balance between performance and power management. Running the Cortex-M4 core at 180 MHz increases available processing throughput, but clock, memory and peripheral activity also determine system power consumption. Use the manufacturer clock-tree configuration and low-power modes rather than driving the device at its maximum frequency by default. This page combines the manufacturer's STM32F439NG product information with distributor specifications, package details and practical engineering guidance. It also documents same-footprint STM32F4 options so engineers can evaluate capacity, temperature-grade and feature differences before committing a design to production.

طلب عرض سعر اتصل بنا
STM32F439NIH6 - 180MHz Cortex-M4 MCU | STMicroelectronics
STM32F439NIH6

STM32F439NIH6 - 180MHz Cortex-M4 MCU | STMicroelectronics

STMicroelectronics STM32F439NIH6 is a 32-bit Arm Cortex-M4 microcontroller operating at up to 180 MHz, with 2 MB of flash memory and DSP and FPU capabilities in a 216-TFBGA package measuring 13 x 13 mm. It belongs to the STM32F4 high-performance microcontroller family and combines real-time control, graphical-interface support, and extensive serial connectivity in one compact surface-mount device. A microcontroller is a programmable semiconductor integrated circuit containing a processor core, memory, peripherals, and communication interfaces. The STM32F4 family is positioned within the hierarchy of 32-bit Arm microcontrollers, embedded processors, and system-on-chip devices. It is designed for applications requiring considerably more computation than a basic 8-bit controller while retaining a compact package, deterministic peripheral access, and low-power operation. The STM32F439NIH6 operates at up to 180 MHz and includes a single-precision floating-point unit and DSP instructions. Its 2 MB flash provides substantially more program storage than entry-level Cortex-M devices, while the manufacturer identifies the device as part of STMicroelectronics' high-performance advanced line. The 216-TFBGA arrangement exposes a large number of GPIO and peripheral connections while maintaining a 13 x 13 mm body size. Typical applications include industrial automation controllers, motor-control systems, networked sensors, human-machine interfaces, audio processing, test and measurement equipment, and connected embedded products. The high clock rate supports responsive control loops and computationally intensive signal processing, while the large pin count enables simultaneous use of communications, display interfaces, analog functions, and digital I/O. Design considerations center on power integrity, decoupling, thermal performance, and correct BGA assembly. Place the required input, output, and bypass capacitors adjacent to their associated supply pins, route high-current paths with minimal loop area, and use an assembly process suitable for a 216-TFBGA device. Review the manufacturer's datasheet for the complete pin list, exposed-pad requirements, and recommended land pattern before releasing the PCB design. This page combines the exact STM32F439NIH6 ordering information with family-level engineering guidance, qualified same-brand alternatives, and design checks that help buyers evaluate package reuse, firmware impact, and supply continuity before requesting a quote.

طلب عرض سعر اتصل بنا
STM32F439VGT6 - 180MHz Cortex-M4 MCU, 1MB Flash | STMicroelectronics
STM32F439VGT6

STM32F439VGT6 - 180MHz Cortex-M4 MCU, 1MB Flash | STMicroelectronics

STMicroelectronics STM32F439VGT6 is a 32-bit Arm Cortex-M4 microcontroller with a maximum operating frequency of 180 MHz, 1 MB of flash memory, and 256 KB of RAM in a 100-pin LQFP package measuring 14 x 14 mm. The device provides 82 I/O pins and includes a single-precision floating-point unit for efficient digital signal processing and control workloads. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, working RAM, peripherals, and interface controllers on one semiconductor device. The STM32F4 series belongs to the hierarchy of 32-bit RISC microcontroller -> embedded microcontroller -> programmable controller -> semiconductor. Its Arm Cortex-M4 core combines deterministic control performance with hardware-assisted floating-point capability, making it suitable for embedded systems that process both ordinary control logic and numerically intensive data. Principal device characteristics include a 180 MHz maximum clock, 1 MB of flash organized as 1M x 8, 256 KB of SRAM, 82 I/O pins, and a 100-LQFP package. The single-precision FPU supports Arm single-precision data-processing instructions, while the 32-bit Cortex-M4 architecture can reach 225 DMIPS as identified in the manufacturer-related datasheet listing. The 100-pin package provides a substantial interface complement for systems requiring multiple communications, control, and general-purpose I/O functions. The STM32F439VGT6 is positioned for high-performance embedded applications rather than ultra-low-cost basic control. Its combination of Cortex-M4 processing, 1 MB of program storage, and 256 KB of SRAM gives designers more room for protocol stacks, control algorithms, data logging, and complex user-interface logic. Exact peripheral selections, voltage ranges, timing limits, and environmental ratings must be confirmed against the complete manufacturer documentation before design release. Typical uses include industrial control systems, networked data-acquisition equipment, motor-control platforms, high-speed communications equipment, and embedded gateways. The 82 available I/O pins are particularly useful for chassis and control interfaces, while the 180 MHz core provides processing headroom for protocol handling and real-time supervisory tasks. The single-precision FPU can accelerate filtering, transforms, and control computations without requiring a separate DSP. PCB implementation requires careful attention to the 100-LQFP land pattern, decoupling, clock configuration, and exposed supply requirements. Place the required input and bulk-decoupling capacitors close to their associated supply pins, route high-speed signals with short returns, and follow the manufacturer's pin-definition and recommended-layout tables. Firmware, peripheral configuration, and the external component network must also be reviewed for timing and signal-integrity constraints. This product reference combines exact device identifiers, package information, memory capacity, core frequency, and engineering selection guidance with practical application and layout considerations. It is designed to help engineers identify the correct STM32F4 device, plan a hardware revision, and evaluate pin-compatible family options without obscuring the distinctions that matter during PCB and firmware validation.

طلب عرض سعر اتصل بنا
STM32F439VIT6 - 180MHz Cortex-M4 2MB Flash 100-LQFP MCU | STMicroelectronics
STM32F439VIT6

STM32F439VIT6 - 180MHz Cortex-M4 2MB Flash 100-LQFP MCU | STMicroelectronics

The STMicroelectronics STM32F439VIT6 is a 32-bit Arm Cortex-M4 microcontroller running up to 180 MHz with 2 MB of on-chip Flash in a 100-LQFP (14x14 mm) surface-mount package. It belongs to the STM32F4 Series, the high-performance STM32 family built around the Arm Cortex-M4 RISC core with an integrated single-precision FPU for DSP-style math. A microcontroller (MCU) is a single chip that integrates a CPU core, Flash program memory, SRAM data memory and a set of dedicated peripherals - timers, ADC, communication interfaces and GPIO - onto one package. Within the product hierarchy it sits as microcontroller > embedded processor > microcontroller unit, and the STM32F4 Series sits above the STM32F1 and STM32F2 families in STMicroelectronics' performance lineup. Key specifications for this device include a maximum CPU frequency of 180 MHz, a 2 MB (2M x 8) Flash array, and a 100-LQFP package with a 14 x 14 mm body. The Cortex-M4 core includes a single-precision floating-point unit, which the listing data confirms, so float-heavy control and signal-processing loops run without software emulation overhead. The STM32F439xx family is the connectivity-oriented member of STM32F4, adding Ethernet MAC and USB OTG HS capability alongside the usual USART, SPI, I2C and timer resources. The 180 MHz core with FPU and ART accelerator architecture delivers roughly three times the DSP throughput of the earlier Cortex-M3 generation, while the F4 series dynamic voltage scaling lets the core drop to lower frequencies for low-power modes. The 100-pin LQFP package exposes a large GPIO count compared with smaller 48- and 64-pin members, which is why the V (100-pin) suffix part is common in industrial control boards and gateway products. Typical applications for the STM32F439VIT6 include industrial Ethernet gateways, PLC and data-acquisition modules, motor and inverter control boards, industrial HMIs, camera and vision front-ends, and connected embedded platforms that need both high clock speed and abundant I/O in a single package. One key design consideration is the power budget: at 180 MHz with the full peripheral set active, the digital core current is substantial, so supply rail design must keep the 3.3 V/5 V-compatible operating points stable and provide clean decoupling on all VDD and VDDA pins. This page consolidates manufacturer and distributor documentation into an engineering-oriented reference with drop-in alternatives, parameter comparisons, and practical design notes that are not consolidated in a single place elsewhere.

طلب عرض سعر اتصل بنا
STM32F439ZGT6 - 180MHz Cortex-M4 1MB MCU | STMicroelectronics
STM32F439ZGT6

STM32F439ZGT6 - 180MHz Cortex-M4 1MB MCU | STMicroelectronics

The STMicroelectronics STM32F439ZGT6 is a 32-bit ARM Cortex-M4 microcontroller operating at up to 180 MHz, with 1 MB of embedded Flash memory and a 144-pin LQFP package measuring 20 x 20 mm. It combines a high-performance processor core with extensive embedded peripherals for demanding embedded-control, communications, audio, and industrial applications. The device supports 2.5 V and 3.3 V supply operation according to the product listing. A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, and peripherals into one device. The STM32F4 family belongs to the broader Arm Cortex-M microcontroller hierarchy and combines real-time control capability with extensive serial communications, analog, timer, and digital interfaces. This makes the STM32F439ZGT6 suitable for systems that need substantial processing performance without using a higher-complexity application processor. Key features include an Arm Cortex-M4 processor with hardware floating-point capability, a maximum clock frequency of 180 MHz, and 1 MB of Flash for firmware storage. Its 144-LQFP package provides a large pin count for exposure of GPIO, communication, power, clock, and debugging functions. The 20 x 20 mm package is readily routed on standard multilayer PCB technology and offers generous copper connectivity around the device. The STM32F4 architecture supports a broad collection of embedded peripherals, including general-purpose timers, serial interfaces, and memory-management functions. Performance requirements should be checked against the exact peripheral configuration required by the application because package pins and peripheral instances vary within the STM32F4 family. Firmware, bootloader, and peripheral configuration should also be reviewed before replacing a part from another STM32 series. Typical uses include industrial automation controllers, networked measurement equipment, audio-processing systems, motor-control platforms, human-interface controllers, and communications gateways. In these applications, the 180 MHz Cortex-M4 core can execute control logic while dedicated timers and serial peripherals manage deterministic input and output tasks. A companion transceiver or interface IC may still be required when the system must connect to Ethernet, RS-232, USB, or another physical network. PCB design should preserve the device power and decoupling layout, especially for the 2.5 V and 3.3 V operating options identified in the product listing. Place local bypass capacitors at supply pins, route high-speed signals over continuous reference planes, and follow the manufacturer pin-description table when assigning all 144 pins. Confirm oscillator, reset, boot, debug, and exposed-thermal-pad requirements against the complete manufacturer documentation before fabrication. This product record combines the exact manufacturer and distributor identity, core memory and processor specifications, package dimensions, sourcing information, engineering applications, and practical design guidance. It also distinguishes same-family STM32 options from a confirmed cross-brand replacement, helping engineers make a compatibility decision without assuming that similar performance automatically guarantees a drop-in PCB substitution.

طلب عرض سعر اتصل بنا
STM32F439ZIT6 - 180MHz Cortex-M4 MCU | STMicroelectronics
STM32F439ZIT6

STM32F439ZIT6 - 180MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F439ZIT6 is a 32-bit Arm Cortex-M4 microcontroller with a maximum operating frequency of 180 MHz, 2 MB of flash memory, a single-precision floating-point unit, and a 144-pin LQFP package measuring 20 mm by 20 mm. It combines deterministic control performance with extensive serial, communications, graphics, and analog peripherals for embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, volatile data memory, and peripheral interfaces on one device. The STM32F439 belongs to the STM32F4 family of 32-bit embedded processors, combining real-time control capability with high-bandwidth data processing. Its Arm Cortex-M4 architecture uses a reduced instruction set optimized for compact embedded code and deterministic execution. The processor operates at up to 180 MHz and includes a single-precision FPU supporting Arm single-precision instructions and data types. A full set of DSP instructions accelerates filtering, transforms, and signal-processing workloads. The device provides 2 MB of flash, organized by the distributor listing as 2M by 8 bits, while its run-time and other memory details should be confirmed from the complete electrical characteristics and memory-map sections of the manufacturer datasheet. The STM32F439ZIT6 is available in a 144-pin LQFP package that supports a broad mixture of general-purpose I/O, communication interfaces, analog functions, timers, and debug facilities. Its high pin count provides more interface options than smaller STM32 packages, making it suitable for designs that need substantial peripheral connectivity while retaining through-hole LQFP assembly and inspection. Typical applications include industrial automation controllers, motor-control platforms, networked industrial equipment, high-performance data acquisition systems, human-machine-interface controllers, and embedded gateways. The 180 MHz core and DSP instruction support benefit control loops and signal processing, while the 2 MB flash capacity allows larger firmware, communication stacks, and configuration data than smaller Cortex-M microcontrollers. When designing around the STM32F439ZIT6, allocate decoupling close to the supply pins, confirm every alternate-function assignment against the pinout, and validate clock, reset, and boot configuration before programming. Because the package exposes many multiplexed pins, a complete board-level review of power, grounds, signal integrity, and unused inputs is more valuable than relying on the processor headline frequency alone. This page combines the verified manufacturer and distributor specifications with package-level design guidance, application fit, drop-in comparison options, and practical selection criteria. It highlights where the STM32F439ZIT6 is a strong fit and where firmware, peripheral, qualification, or sourcing checks are still required before approving a replacement.

طلب عرض سعر اتصل بنا
STM32F446MCY6TR - 180MHz Cortex-M4 MCU | STMicroelectronics
STM32F446MCY6TR

STM32F446MCY6TR - 180MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F446MCY6TR is a 32-bit ARM Cortex-M4 microcontroller operating up to 180 MHz, with 256 KB of Flash memory and DSP and FPU capabilities, supplied in an 81-pin WLCSP package. The exact RAM size, supply range, temperature range, and pin assignments are not present in the supplied verified snippets and therefore remain marked as data needed. A microcontroller, or MCU, is a semiconductor device that integrates a processor core, memory, peripherals, and communication interfaces into one compact component. The STM32F446 belongs to the STM32F4 high-performance family and is positioned above simpler control MCUs: its Cortex-M4 core supports digital signal processing and floating-point work, while the STM32 ecosystem provides development tools, firmware libraries, and board resources. The verified distributor listing identifies the device as a 32-bit Cortex-M4 MCU with 180 MHz operation and 256 KB of Flash. The STMicroelectronics family page also identifies the STM32F446 line with dual Quad SPI, SDRAM, and audio interfaces. These features make it suitable for systems requiring substantial peripheral connectivity alongside real-time control, signal processing, communications, or external-memory access. The device can serve as the central controller in industrial automation, audio equipment, communications infrastructure, instrumentation, and connected embedded products. Its 180 MHz execution rate provides more compute headroom than lower-frequency general-purpose MCUs, while DSP instructions and an FPU are valuable for filtering, control loops, and other arithmetic-intensive workloads. Peripheral requirements must still be checked against the exact package pinout and device datasheet. A key design consideration is software and peripheral migration. Firmware should be developed against the exact STM32F446 device definition, clock tree, memory map, and CubeMX configuration rather than assuming compatibility with every STM32F4 member. Power sequencing, decoupling, exposed-ball access, programming, and signal-integrity requirements depend on the verified 81-WLCSP layout and board design. This page consolidates the supplied distributor and manufacturer findings with explicit data gaps, rather than inventing specifications. It also avoids presenting generic STM32 cross-references as true drop-in replacements because the supplied search results did not verify same-package, pin-to-pin alternatives.

طلب عرض سعر اتصل بنا
STM32F446MEY6TR - 180MHz Cortex-M4 512KB MCU | STMicroelectronics
STM32F446MEY6TR

STM32F446MEY6TR - 180MHz Cortex-M4 512KB MCU | STMicroelectronics

STMicroelectronics STM32F446MEY6TR is an Arm Cortex-M4 32-bit RISC microcontroller operating up to 180 MHz, with 512 KB of Flash memory and DSP and FPU capability, in an 81-WLCSP package measuring 3.80 mm by 3.69 mm. The device is positioned for compact, high-performance embedded systems requiring substantial processing speed, local program storage, and extensive serial peripherals. A microcontroller is a semiconductor device that integrates a processor core, memory, and peripherals into one package. The STM32F4 series belongs to the embedded-processing hierarchy: Arm Cortex-M core, 32-bit RISC processor, microcontroller, and embedded semiconductor. This integration reduces board area and lets firmware control communications, data acquisition, timing, storage, and external equipment through dedicated peripherals. The verified manufacturer information identifies a maximum operating frequency of 180 MHz, 512 KB of Flash, 225 DMIPS, an FPU, DSP instructions, dual Quad SPI, SDRAM support, and audio interfaces. The STM32F446 family therefore fits designs where compute performance and compactness matter more than a large general-purpose package. Its BGA-style WLCSP construction also requires careful PCB layout, assembly process control, and inspection because board-level rework is less straightforward than with exposed-leaded packages. The ARM Cortex-M4 core provides deterministic control alongside accelerated floating-point and digital signal processing. This combination is useful when control loops must execute quickly alongside filtering, transforms, audio processing, or sensor-data conditioning. The 512 KB program Flash provides more local code space than many entry-level microcontrollers, although the supplied sources do not state RAM capacity, exact peripheral mappings, voltage limits, or package pin definitions. Typical uses include compact industrial control, audio processing, communications equipment, digital signal acquisition, and embedded systems that benefit from external SDRAM. The family's dual Quad SPI can support high-bandwidth serial devices, while SDRAM and audio interfaces provide expansion paths for data-intensive or multimedia designs. Firmware and board support must be selected for the exact STM32F446 device variant. The primary engineering consideration is the 81-WLCSP assembly footprint. Its 3.80 mm by 3.69 mm area supports miniaturization but demands manufacturer-qualified PCB design rules, fine-pitch assembly capability, appropriate solder-paste control, and reliable inspection. Users should download the official datasheet and package drawing before assigning signals or releasing a layout. This page consolidates verified manufacturer and distributor information, exact pricing evidence, package constraints, and engineering guidance. It also distinguishes confirmed facts from missing technical data rather than inferring unverified RAM, pinout, electrical limits, or replacement details.

طلب عرض سعر اتصل بنا
STM32F446RCT6 - 180MHz 256KB Cortex-M4 MCU | STMicro
STM32F446RCT6

STM32F446RCT6 - 180MHz 256KB Cortex-M4 MCU | STMicro

The STMicroelectronics STM32F446RCT6 is a 32-bit Arm Cortex-M4 microcontroller with DSP and FPU support, operating up to 180 MHz and packaged in a 64-LQFP 10 x 10 mm surface-mount package. It integrates 256 KB of flash memory, 128 KB of SRAM, and a 4 KB backup SRAM, making it suitable for real-time embedded systems requiring substantial local memory and peripheral integration. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals into one embedded-control device. The STM32F4 family belongs to the Arm Cortex-M4 microcontroller hierarchy, combining efficient interrupt-driven control with higher-performance floating-point and digital signal processing. STM32F446RCT6 is therefore positioned between simpler Cortex-M microcontrollers and higher-end Cortex-M7 devices for control, communications, and signal-processing workloads. Its headline features include a 180 MHz maximum core frequency, 256 KB flash, 128 KB system SRAM, and an Arm Cortex-M4 core with floating-point unit and DSP instructions. The verified distributor description also identifies a 64-LQFP package and high-performance foundation positioning. These resources support moderate real-time workloads, local buffering, protocol handling, and control loops without relying on external flash or SRAM. The STM32F446xC/E device family is designed for applications combining real-time control and connected embedded functionality. Its integrated processing performance supports faster control calculations than lower-frequency Cortex-M devices, while the DSP and FPU capabilities are useful for filtering, transforms, and numeric control algorithms. Exact peripheral configurations, voltage limits, timers, communication interfaces, and electrical ratings must be confirmed in the official STMicroelectronics product documentation before design release. Typical uses include industrial automation, motor and motion control, communications equipment, audio and digital signal processing, test and measurement, and connected embedded products. A motor-control design benefits from the 180 MHz processing rate and DSP/FPU resources; an industrial controller can use local memory for protocols and state; and a communications gateway can offload parsing and real-time tasks from a higher-level processor. Firmware and peripheral selection must still match the exact pinout and electrical requirements. Designers should begin with the STM32F446RC pinout and reference manual, then verify clocking, power, decoupling, reset, boot, and exposed-pin requirements against the selected PCB. Because only summary source data was supplied, detailed pin names, voltage ranges, current limits, and package thermal metrics are intentionally not guessed here. The page combines verified distributor specifications, sourcing links, and practical qualification guidance for engineering review.

طلب عرض سعر اتصل بنا
STM32F446RCT6TR - 180MHz Cortex-M4 MCU 256KB Flash | ST
STM32F446RCT6TR

STM32F446RCT6TR - 180MHz Cortex-M4 MCU 256KB Flash | ST

The STMicroelectronics STM32F446RCT6TR is a high-performance ARM Cortex-M4 32-bit RISC microcontroller operating at up to 180 MHz, integrating 256 KB of Flash memory and housed in a 64-pin LQFP (10x10 mm) package. The Cortex-M4 core includes a single-precision floating-point unit (FPU) and DSP instructions, while the on-chip Art Accelerator enables 0-wait-state execution from Flash at full CPU speed. The MCU targets motor control, industrial, audio, and consumer applications that require DSP capability with low power consumption. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, peripherals, and I/O on one silicon die. The STM32 family is built on the ARM Cortex-M architecture, a 32-bit RISC core family widely used in embedded systems for its deterministic real-time behaviour and energy efficiency. The STM32F4 sub-family is the high-performance tier, positioning the STM32F4 above Cortex-M0/M3 devices in the STM32 portfolio, with DSP extensions and an FPU that simplify the design of motor control loops, audio codecs, and signal processing pipelines. Key features of the STM32F446RCT6TR include 128 KB of SRAM, a flexible static memory controller (FSMC) for external memory expansion, multiple high-speed timers, three 12-bit ADCs (2.4 MSPS), two 12-bit DACs, USB 2.0 full-speed and high-speed OTG interfaces, CAN 2.0B, SDMMC, I2S, and I2C. The supply voltage range of 1.8 V to 3.6 V makes it suitable for battery-powered applications, and seven low-power modes (Sleep, Stop, Standby, etc.) optimise energy use in duty-cycled designs. The Cortex-M4 architecture is paired with ST's ART Accelerator, which prefetches and caches instructions to deliver linear performance from Flash, eliminating the typical wait states that limit execution throughput. Hardware divide and single-cycle multiply accumulate (MAC) operations enable real-time DSP workloads, while the memory protection unit (MPU) and true random-number generator (TRNG) support secure firmware execution and cryptographic key generation for IoT endpoints. Typical applications for the STM32F446RCT6TR include motor drives (FOC for PMSM and BLDC), industrial fieldbus nodes (CAN, RS-485), audio DSP front-ends, USB peripherals, USB-C chargers, and consumer appliances that demand 32-bit performance without an MPU-class processor. The combination of USB HS OTG, CAN, and 12-bit ADC at 2.4 MSPS positions this MCU for sensor hubs and digital power conversion in the 100 W to 1 kW range. When designing with the STM32F446RCT6TR, the VDD/VDDA pin pair must be decoupled with 100 nF and 4.7 µF capacitors placed within 5 mm of the package, and the NRST pin requires an external 10 kΩ pull-up with a 100 nF capacitor for reliable reset behaviour. Boot mode is selected through the BOOT0 pin state at reset, and designers should provide a header or test point for in-system programming via SWD (PA13/PA14). The 64-LQFP (10x10) package has a typical thermal resistance of 38 °C/W, which is adequate for industrial-grade ambient operation up to 85 °C at moderate CPU load. This page synthesises distributor pricing, drop-in pin-compatible alternatives from the same STM32F4 family, and practical PCB design notes drawn from ST application notes and reference designs, providing information beyond the manufacturer datasheet summary alone.

طلب عرض سعر اتصل بنا
STM32F446RCT7 - 180MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics
STM32F446RCT7

STM32F446RCT7 - 180MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics

The STMicroelectronics STM32F446RCT7 is an ARM Cortex-M4 32-bit microcontroller operating up to 180 MHz, with 256 KB of Flash memory and 64-LQFP (10 x 10 mm) packaging. It belongs to the STM32F4 high-performance microcontroller family and combines a floating-point processing unit with extensive embedded peripherals for control, communications, and signal-processing designs. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, peripherals, and interface controllers onto one package. STM32 devices use the ARM Cortex-M architecture within a broader embedded-computing hierarchy: STM32F4 high-performance MCU -> ARM Cortex-M4 MCU -> 32-bit RISC processor -> embedded microcontroller. The STM32F446RCT7 is suited to systems requiring real-time control, data acquisition, communications, and moderate floating-point processing. Key verified features include a 180 MHz maximum operating frequency, 256 KB Flash memory, ARM Cortex-M4 core technology, and a 64-pin LQFP package. The Cortex-M4 core includes DSP and FPU capabilities according to the distributor and manufacturer descriptions. These features support responsive control loops and compact embedded applications without requiring a separate processor for many numerical tasks. The STM32F446xC/E family is identified by STMicroelectronics as a high-performance Arm Cortex-M4 32-bit RISC family, with devices operating up to 180 MHz. The 64-LQFP package provides a substantial pin count for external peripherals, while the 256 KB Flash capacity provides room for application firmware and embedded software. Exact peripheral details, voltage limits, memory breakdown, and temperature limits were not included in the supplied verified data and should be taken from the manufacturer datasheet before design release. Typical application directions include industrial automation, consumer electronics, medical devices, communications equipment, and embedded control systems. The STM32F446RCT7 is particularly relevant where real-time processing, control peripherals, communications, and a compact surface-mount package are required. The 180 MHz Cortex-M4 core also makes it a candidate for signal acquisition, motor-control assistance, and connected embedded systems, subject to peripheral and electrical verification. When designing a board around the STM32F446RCT7, engineers should use the official pinout and package drawing rather than relying on generic STM32F4 assumptions. Confirm the exact pin multiplexing, power requirements, decoupling network, clock plan, exposed programming interfaces, and peripheral assignments against the manufacturer documentation. A same-package replacement must also be checked for identical pin functions, memory requirements, electrical limits, and software-support requirements before substitution. This page consolidates the verified manufacturer and distributor descriptions for the STM32F446RCT7 and separates confirmed data from parameters requiring datasheet confirmation. It also records cross-reference leads and engineering-use guidance without treating generic STM32 alternatives as guaranteed drop-in replacements.

طلب عرض سعر اتصل بنا
STM32F446RCT7TR - 180MHz 256KB Cortex-M4 MCU | STMicroelectronics
STM32F446RCT7TR

STM32F446RCT7TR - 180MHz 256KB Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F446RCT7TR is a 32-bit Arm Cortex-M4 microcontroller operating up to 180 MHz, with 256 KB of Flash memory in a 64-pin LQFP 10 x 10 mm package. The device combines a high-performance RISC core with DSP and FPU capabilities for embedded control, communications, audio, and industrial applications. A microcontroller is a compact embedded-computing component that integrates a processor core, memory, peripherals, and communication interfaces onto one semiconductor device. The STM32F4 family belongs to the hierarchy of 32-bit MCU, embedded processor, microcontroller, and semiconductor. STM32F446 devices are designed for applications requiring real-time control, data processing, and multiple peripheral resources within a single integrated circuit. The verified product information identifies an Arm Cortex-M4 core, 32-bit processing, a maximum operating frequency of 180 MHz, and 256 KB of Flash memory. The Cortex-M4 core supports digital signal-processing and floating-point workloads as identified by distributor descriptions. These characteristics make the MCU suitable for connected industrial equipment, sensor systems, audio equipment, medical instrumentation, and embedded control platforms. The STM32F446RCT7TR is offered in a 64-pin LQFP surface-mount package. The distributor listing identifies the package as 64-LQFP 10 x 10 mm, while another distributor description uses 64-Pin PQFP terminology for the same ordering code. The manufacturer product page describes the STM32F446xC/E family as based on a high-performance Arm Cortex-M4 32-bit RISC core operating up to 180 MHz. Typical applications include industrial automation, communication equipment, audio processing, medical devices, and networked embedded products. The device can serve as the central controller for real-time signal acquisition, motor or actuator control, communications bridging, and low-power supervisory functions. Exact peripheral assignments, voltage limits, memory-map details, and electrical operating limits should be confirmed in the manufacturer datasheet before design release. When designing around the STM32F446RCT7TR, engineers should preserve the package footprint, verify all exposed-pin assignments, provide suitable decoupling, and confirm the selected STM32F4 power, clock, and memory configuration against the board schematic. Firmware migration should also account for the exact STM32F446xC device variant and its documented peripheral configuration. This page consolidates verified distributor specifications, manufacturer family information, application guidance, and drop-in alternative analysis for engineers evaluating STM32F446RCT7TR designs.

طلب عرض سعر اتصل بنا
STM32F446RET6 - 180MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics
STM32F446RET6

STM32F446RET6 - 180MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics

The STMicroelectronics STM32F446RET6 is a high-performance 32-bit ARM Cortex-M4 microcontroller with FPU, running at up to 180 MHz, with 512 KB Flash and 128 KB SRAM, housed in a 64-pin LQFP (10x10 mm) package. A microcontroller (MCU) is a compact integrated circuit that governs a specific operation in an embedded system, combining a processor core, memory, and programmable I/O peripherals on a single chip. The STM32F446RET6 belongs to the STM32F4 series, part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers. Within this hierarchy it sits in the high-performance Cortex-M4 class, whose DSP instructions and single-precision FPU make it well suited to real-time signal processing and closed-loop control. Key features include 512 KB Flash with 128 KB system SRAM plus 4 KB backup SRAM, a rich analog subsystem with three 12-bit ADCs and two 12-bit DACs, and 14 timers (12x 16-bit and 2x 32-bit). Communication coverage is broad: SPI, I2C, USART, CAN, USB OTG FS/HS, SDIO, and an 8080/6800 LCD parallel interface. A true random number generator, camera interface (DCMI), and memory protection unit extend its security and imaging capability. Technically, the device operates from a 1.7V to 3.6V supply and uses flexible clocking: external crystal (HSE), internal RC oscillators (HSI/LSI), and PLL multiplication to reach the full 180 MHz core clock. The Cortex-M4 NVIC and MPU support deterministic real-time behavior, while the LQFP64 package provides 51 GPIO pins, many multiplexed to alternate functions. Typical applications include motor control (FOC exploits the FPU and fast ADCs), industrial automation, digital audio processing (the F446 media-access line was designed for audio with I2S and PLLI2S), and IoT nodes requiring USB or CAN connectivity. Design consideration: decouple all VDD/VDDA pins with 100 nF ceramics close to the pins, and route the HSE crystal with short traces and guard ground for stable 180 MHz operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet.

طلب عرض سعر اتصل بنا
STM32F446RET6TR - 180MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics (Tape & Reel)
STM32F446RET6TR

STM32F446RET6TR - 180MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F446RET6TR is a high-performance 32-bit ARM Cortex-M4 microcontroller with FPU, running at up to 180 MHz, with 512 KB Flash and 128 KB SRAM, housed in a 64-pin LQFP (10x10 mm) package. A microcontroller (MCU) is a compact integrated circuit that governs a specific operation in an embedded system, combining a processor core, memory, and programmable I/O peripherals on a single chip. The STM32F446RET6TR belongs to the STM32F4 series, part of the broader STM32 family of 32-bit ARM Cortex-M microcontrollers. Within this hierarchy it sits in the high-performance Cortex-M4 class, whose DSP instructions and single-precision FPU make it well suited to real-time signal processing and closed-loop control. Key features include 512 KB Flash with 128 KB system SRAM plus 4 KB backup SRAM, a rich analog subsystem with three 12-bit ADCs and two 12-bit DACs, and 14 timers (12x 16-bit and 2x 32-bit). Communication coverage is broad: SPI, I2C, USART, CAN, USB OTG FS/HS, SDIO, and an 8080/6800 LCD parallel interface. A true random number generator, camera interface (DCMI), and memory protection unit extend its security and imaging capability. Technically, the device operates from a 1.7V to 3.6V supply and uses flexible clocking: external crystal (HSE), internal RC oscillators (HSI/LSI), and PLL multiplication to reach the full 180 MHz core clock. The Cortex-M4 NVIC and MPU support deterministic real-time behavior, while the LQFP64 package provides 51 GPIO pins, many multiplexed to alternate functions. Typical applications include motor control (FOC exploits the FPU and fast ADCs), industrial automation, digital audio processing (the F446 media-access line was designed for audio with I2S and PLLI2S), and IoT nodes requiring USB or CAN connectivity. Design consideration: decouple all VDD/VDDA pins with 100 nF ceramics close to the pins, and route the HSE crystal with short traces and guard ground for stable 180 MHz operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the ST datasheet.

طلب عرض سعر اتصل بنا
STM32F446RET7 - 180MHz Cortex-M4 512KB MCU | STMicroelectronics
STM32F446RET7

STM32F446RET7 - 180MHz Cortex-M4 512KB MCU | STMicroelectronics

The STMicroelectronics STM32F446RET7 is a 32-bit Arm Cortex-M4 microcontroller with a 180 MHz maximum clock, 512 KB of flash memory, and a 64-pin LQFP package measuring 10 mm by 10 mm. The verified distributor listing identifies an integrated floating-point unit and DSP capability, making the device suitable for real-time control, signal processing, communications, and connected embedded systems. A microcontroller is a programmable system-on-chip that integrates a CPU core, nonvolatile program memory, data memory, peripherals, and interface controllers on one die. In the product hierarchy, the STM32F446 belongs to the STM32F4 family of 32-bit microcontrollers and combines an Arm Cortex-M4 processor with embedded-control peripherals. Its 32-bit architecture supports efficient control tasks, while the DSP and FPU features improve performance for common signal-processing workloads. The verified data establishes a 180 MHz operating frequency, 512 KB organized as 512K by 8 bits of flash, and a 64-LQFP package. The STM32F4 family positioning also identifies the device as a high-performance foundation-line MCU. Detailed RAM size, GPIO count, operating-voltage range, peripheral inventory, temperature range, and electrical limits are not present in the supplied excerpts and therefore remain marked as data needed rather than inferred. The STM32F446RET7 can serve as the central controller in industrial equipment where deterministic real-time behavior and floating-point calculations are useful. Its Cortex-M4 DSP and FPU support is relevant to digital filtering, control loops, motion-related computation, and signal conditioning. The 512 KB flash capacity provides room for a substantial embedded application and boot code, although final firmware sizing must be checked against SRAM, bootloader, and peripheral requirements. A 64-pin LQFP is appropriate for prototypes, instruments, automation controllers, communications equipment, and industrial control boards that need more external pins than a compact QFN package provides. The 10 mm by 10 mm body is larger than the smallest leaded packages, so PCB designers should follow the manufacturer land pattern and allow adequate pin-row clearance during inspection and rework. When selecting this MCU, engineers should verify the complete pinout, alternate-function mapping, clock tree, memory map, and peripheral electrical limits from the manufacturer datasheet before layout. Firmware development also requires confirming the supported toolchain and debugging interface. Migration to another STM32F4 device should never be based only on package similarity; peripheral functions, pin assignments, clock requirements, and software support must be reviewed explicitly. This product record consolidates verified distributor specifications, source links, package details, application guidance, and replacement limitations. It also distinguishes confirmed drop-in facts from unverified comparisons so procurement and engineering teams can review current availability, pricing, and technical fit against authoritative documentation.

طلب عرض سعر اتصل بنا
STM32F446RET7TR - 180MHz Cortex-M4 512KB MCU | STMicroelectronics (Tape & Reel)
STM32F446RET7TR

STM32F446RET7TR - 180MHz Cortex-M4 512KB MCU | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM32F446RET7TR is a 32-bit Arm Cortex-M4 microcontroller with a 180 MHz maximum clock, 512 KB of flash memory, and a 64-pin LQFP package measuring 10 mm by 10 mm. The verified distributor listing identifies an integrated floating-point unit and DSP capability, making the device suitable for real-time control, signal processing, communications, and connected embedded systems. A microcontroller is a programmable system-on-chip that integrates a CPU core, nonvolatile program memory, data memory, peripherals, and interface controllers on one die. In the product hierarchy, the STM32F446 belongs to the STM32F4 family of 32-bit microcontrollers and combines an Arm Cortex-M4 processor with embedded-control peripherals. Its 32-bit architecture supports efficient control tasks, while the DSP and FPU features improve performance for common signal-processing workloads. The verified data establishes a 180 MHz operating frequency, 512 KB organized as 512K by 8 bits of flash, and a 64-LQFP package. The STM32F4 family positioning also identifies the device as a high-performance foundation-line MCU. Detailed RAM size, GPIO count, operating-voltage range, peripheral inventory, temperature range, and electrical limits are not present in the supplied excerpts and therefore remain marked as data needed rather than inferred. The STM32F446RET7TR can serve as the central controller in industrial equipment where deterministic real-time behavior and floating-point calculations are useful. Its Cortex-M4 DSP and FPU support is relevant to digital filtering, control loops, motion-related computation, and signal conditioning. The 512 KB flash capacity provides room for a substantial embedded application and boot code, although final firmware sizing must be checked against SRAM, bootloader, and peripheral requirements. A 64-pin LQFP is appropriate for prototypes, instruments, automation controllers, communications equipment, and industrial control boards that need more external pins than a compact QFN package provides. The 10 mm by 10 mm body is larger than the smallest leaded packages, so PCB designers should follow the manufacturer land pattern and allow adequate pin-row clearance during inspection and rework. When selecting this MCU, engineers should verify the complete pinout, alternate-function mapping, clock tree, memory map, and peripheral electrical limits from the manufacturer datasheet before layout. Firmware development also requires confirming the supported toolchain and debugging interface. Migration to another STM32F4 device should never be based only on package similarity; peripheral functions, pin assignments, clock requirements, and software support must be reviewed explicitly. This product record consolidates verified distributor specifications, source links, package details, application guidance, and replacement limitations. It also distinguishes confirmed drop-in facts from unverified comparisons so procurement and engineering teams can review current availability, pricing, and technical fit against authoritative documentation.

طلب عرض سعر اتصل بنا
STM32F446VCT6 - 180MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics
STM32F446VCT6

STM32F446VCT6 - 180MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics

The STM32F446VCT6 is a high-performance 32-bit microcontroller from STMicroelectronics, based on the Arm® Cortex®-M4 core with DSP and FPU instructions. It operates at a maximum frequency of 180 MHz, delivering 225 DMIPS/1.25 DMIPS/MHz, and is housed in a 100-pin LQFP (14x14 mm) package. The device features 256 KB of Flash memory and 128 KB of SRAM, making it suitable for a wide range of embedded applications. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The STM32F446VCT6 belongs to the STM32F4 series, which is part of the broader STM32 family of 32-bit microcontrollers. This family is known for its balance of performance, power efficiency, and rich peripheral integration, positioning it as a leading choice in the microcontroller market. Key features of the STM32F446VCT6 include a 180 MHz Arm Cortex-M4 core with floating-point unit (FPU), 256 KB Flash, 128 KB SRAM, and a comprehensive set of peripherals. It supports multiple communication interfaces such as USART, SPI, I2C, CAN, USB OTG, and SDIO. The device also includes advanced analog peripherals like 12-bit ADCs and DACs, timers, and a true random number generator (RNG). These features enable complex real-time control and signal processing tasks. Technically, the STM32F446VCT6 leverages the ARM Cortex-M4 architecture with DSP instructions and a single-precision FPU, allowing efficient execution of digital signal processing algorithms. The device operates from a 2.0V to 3.6V power supply and includes multiple power-saving modes, such as Sleep, Stop, and Standby, to optimize energy consumption. The 100-pin LQFP package provides a compact footprint while offering sufficient I/O pins for diverse applications. Typical applications include industrial control systems, motor drives, consumer electronics, IoT devices, and audio processing. The high clock speed and FPU make it ideal for applications requiring real-time computation, such as motor control with field-oriented control (FOC) algorithms or audio effects processing. The rich peripheral set also supports connectivity in smart home and industrial automation scenarios. When designing with this device, ensure proper decoupling of the power supply pins with 100 nF capacitors placed close to each VDD pin. Additionally, consider the thermal characteristics of the LQFP-100 package; for high-current I/O toggling, adequate PCB copper area is recommended to dissipate heat effectively.

USD $4.98 اتصل بنا
STM32F446VCT6TR - 180MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics (Tape & Reel)
STM32F446VCT6TR

STM32F446VCT6TR - 180MHz Cortex-M4 MCU, 256KB Flash | STMicroelectronics (Tape & Reel)

The STM32F446VCT6TR is a high-performance 32-bit microcontroller from STMicroelectronics, based on the Arm® Cortex®-M4 core with DSP and FPU instructions. It operates at a maximum frequency of 180 MHz, delivering 225 DMIPS/1.25 DMIPS/MHz, and is housed in a 100-pin LQFP (14x14 mm) package. The device features 256 KB of Flash memory and 128 KB of SRAM, making it suitable for a wide range of embedded applications. A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory, and programmable input/output peripherals. The STM32F446VCT6TR belongs to the STM32F4 series, which is part of the broader STM32 family of 32-bit microcontrollers. This family is known for its balance of performance, power efficiency, and rich peripheral integration, positioning it as a leading choice in the microcontroller market. Key features of the STM32F446VCT6TR include a 180 MHz Arm Cortex-M4 core with floating-point unit (FPU), 256 KB Flash, 128 KB SRAM, and a comprehensive set of peripherals. It supports multiple communication interfaces such as USART, SPI, I2C, CAN, USB OTG, and SDIO. The device also includes advanced analog peripherals like 12-bit ADCs and DACs, timers, and a true random number generator (RNG). These features enable complex real-time control and signal processing tasks. Technically, the STM32F446VCT6TR leverages the ARM Cortex-M4 architecture with DSP instructions and a single-precision FPU, allowing efficient execution of digital signal processing algorithms. The device operates from a 2.0V to 3.6V power supply and includes multiple power-saving modes, such as Sleep, Stop, and Standby, to optimize energy consumption. The 100-pin LQFP package provides a compact footprint while offering sufficient I/O pins for diverse applications. Typical applications include industrial control systems, motor drives, consumer electronics, IoT devices, and audio processing. The high clock speed and FPU make it ideal for applications requiring real-time computation, such as motor control with field-oriented control (FOC) algorithms or audio effects processing. The rich peripheral set also supports connectivity in smart home and industrial automation scenarios. When designing with this device, ensure proper decoupling of the power supply pins with 100 nF capacitors placed close to each VDD pin. Additionally, consider the thermal characteristics of the LQFP-100 package; for high-current I/O toggling, adequate PCB copper area is recommended to dissipate heat effectively.

USD $18.31 اتصل بنا
STM32F446VCT7 - 180MHz Cortex-M4 MCU | STMicroelectronics
STM32F446VCT7

STM32F446VCT7 - 180MHz Cortex-M4 MCU | STMicroelectronics

The STMicroelectronics STM32F446VCT7 is a high-performance 32-bit Arm Cortex-M4 microcontroller with DSP and FPU support, operating up to 180 MHz, and supplied in a 100-LQFP 14 mm × 14 mm package. The verified distributor data identifies 256 KB of Flash memory and 128 KB of SRAM for this exact device, while the STM32F446xC/E family combines substantial processing performance with extensive embedded peripherals and connectivity. Its 225 DMIPS positioning makes it appropriate for responsive control, signal processing, communications, and human-interface applications where an efficient embedded MCU rather than a higher-cost MPU is required. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and interface controllers on one chip. The STM32F446 belongs to the Arm Cortex-M4 class of 32-bit RISC embedded processors, combining deterministic real-time control with digital signal processing and single-precision floating-point capabilities. Within the broader product hierarchy, it is an MCU, then a semiconductor, then an embedded processing component designed to operate directly within a larger control or communication system. The most prominent verified features are a 180 MHz maximum core frequency, 225 DMIPS advertised for the family, 256 KB Flash, and 128 KB SRAM. The Cortex-M4 processor includes DSP and FPU resources suitable for filtering, transforms, control loops, and audio-related computations. The STM32F446 family also adds interfaces identified by STMicroelectronics, including dual Quad SPI, SDRAM capability, and audio interfaces, giving designers multiple paths for connecting sensors, displays, storage, and network or audio peripherals. As a 100-LQFP device, the STM32F446VCT7 supports a compact, widely visible surface-mount assembly while exposing substantially more I/O than smaller 48-pin or 64-pin STM32 packages. Exact peripheral assignments, pin multiplexing, voltage limits, timers, communication channels, and electrical characteristics were not supplied in the verified excerpts and must therefore be confirmed in the manufacturer datasheet before schematic or PCB signoff. The same applies to programming, debug, clock-tree, and power-supply details. Typical uses include industrial automation modules, motor and motion-control platforms, communication equipment, audio interfaces, data-acquisition systems, and connected embedded products. For a new design, use STM32CubeMX or the STM32CubeIDE ecosystem to generate startup code, configure clocks and peripherals, and organize the HAL or low-level driver layer. Validate the final operating frequency against the selected power-supply voltage and the device temperature range before deployment. The most important procurement and design checks are exact package pin compatibility, firmware-device support, memory requirements, peripheral availability, operating-temperature grade, and lifecycle continuity. Because no verified pin list was included in the supplied data, a complete 100-pin map should be taken directly from the manufacturer package documentation rather than inferred. This page consolidates verified source facts, practical integration considerations, and sourcing information while clearly separating verified values from specification gaps. For procurement, distributors list the STM32F446VCT7 from $8.3394 at LCSC as of 2026-10-22, and DigiKey and Mouser product pages provide additional availability and ordering information. Price and inventory remain time-sensitive, so confirm current stock, authorized-channel status, and volume pricing before issuing a purchase order. This information is intended to support engineering selection and does not replace the manufacturer reference manual, datasheet, errata, or qualification report.

طلب عرض سعر اتصل بنا
STM32F446VET6 - 180MHz Cortex-M4 512KB MCU | STMicroelectronics
STM32F446VET6

STM32F446VET6 - 180MHz Cortex-M4 512KB MCU | STMicroelectronics

STMicroelectronics STM32F446VET6 is an ARM Cortex-M4 32-bit RISC microcontroller with a maximum operating frequency of 180 MHz, 512 KB of Flash memory, and a 100-pin LQFP package measuring 14 x 14 mm. It combines a high-performance processor core with integrated DSP and floating-point processing capabilities, making it suitable for connected control, industrial automation, communications, and embedded signal-processing systems. An ARM Cortex-M4 microcontroller is a 32-bit embedded processor designed for real-time control workloads. Its architecture belongs to the MCU hierarchy, combining a processor core, memory, communication peripherals, timers, analog interfaces, and interrupt handling on one integrated circuit. The STM32F446VET6 is positioned within STMicroelectronics’ STM32F4 family as a high-performance microcontroller for designs requiring greater processing speed and peripheral integration than basic microcontrollers. The verified distributor description identifies a 180 MHz ARM Cortex-M4 core, 512 KB Flash organized as 512K x 8, and a 100-LQFP 14 x 14 mm package. The manufacturer identifies the STM32F446xC/E devices as a family based on the high-performance Arm Cortex-M4 32-bit RISC core. The exact voltage range, RAM size, operating-temperature range, GPIO count, and detailed electrical limits were not included in the supplied source data and therefore require verification from the official datasheet before design release. This MCU is suited to applications that require deterministic embedded control and broad peripheral connectivity. Typical uses include industrial automation equipment, communications equipment, data acquisition, motor and motion-control systems, and connected embedded products. The 512 KB Flash capacity provides room for application firmware, boot code, configuration data, and protocol stacks, although actual code-size requirements must be checked against the project build. A critical design practice is to verify the complete electrical and pin-level requirements against the STMicroelectronics manufacturer datasheet before PCB layout or firmware deployment. Designers should confirm power-supply limits, clock requirements, decoupling, pin multiplexing, exposed thermal-pad behavior where applicable, programming connections, and package-specific land pattern. The distributor and manufacturer references establish the core identity and headline specifications, but they do not replace device-specific electrical validation. This page combines the supplied manufacturer and distributor information with application guidance, procurement references, comparison considerations, and engineering-oriented selection notes. Pricing and availability remain time-sensitive and should be confirmed with an authorized distributor or XAIPART at the time of quotation, especially for an active high-performance MCU.

طلب عرض سعر اتصل بنا
STM32F446VET6TR - 180MHz Cortex-M4 512KB MCU | STMicroelectronics
STM32F446VET6TR

STM32F446VET6TR - 180MHz Cortex-M4 512KB MCU | STMicroelectronics

STMicroelectronics STM32F446VET6TR is a high-performance 32-bit Arm Cortex-M4 microcontroller with DSP and floating-point instructions, operating up to 180 MHz. It integrates 512 KB of Flash memory, 128 KB of SRAM, and 81 I/Os in a 100-LQFP 14 x 14 mm package. The device belongs to the STM32F4 performance-oriented microcontroller family. An Arm Cortex-M4 microcontroller combines a 32-bit RISC processor core with tightly coupled peripherals, memory, and interrupt hardware on one integrated circuit. This MCU class is designed for embedded control, real-time signal processing, communications, audio, and industrial applications. The STM32F4 family hierarchy is Cortex-M4 processor, 32-bit RISC core, embedded microcontroller, and semiconductor. Verified features for STM32F446VET6TR include an Arm Cortex-M4 core, 180 MHz maximum frequency, 512 KB Flash, 128 KB SRAM, 81 I/Os, DSP instructions, and an FPU. STMicroelectronics describes the STM32F446 family as offering 225 DMIPS and enhanced connectivity through dual Quad-SPI, SDRAM, and audio interfaces. The 100-LQFP package provides a substantial pin count for external memory, communication peripherals, and mixed-signal control systems. The STM32F446 architecture is suited to applications that need more compute performance than general-purpose Cortex-M devices without moving to a higher-complexity microcontroller architecture. Its DSP and FPU resources can accelerate filter, control, and floating-point workloads, while the 512 KB Flash and 128 KB SRAM provide local storage for firmware and working data. Exact electrical limits, peripherals, pin names, and timing values must be taken from the manufacturer datasheet before hardware release. Typical applications include industrial automation, audio and digital signal processing, communications infrastructure, motor and motion control, test and measurement, and connected embedded equipment. The 180 MHz operating rate and integrated memory make the MCU useful for real-time control tasks, while the 81 I/Os support sensors, actuators, displays, transceivers, and external peripheral devices. A key design consideration is package-level planning: the 100-LQFP footprint requires careful routing of power, ground, high-speed signals, and decoupling. Firmware compatibility also depends on exact peripheral configuration, clock setup, startup sequence, pin multiplexing, and memory initialization; a same-family or pin-compatible designation alone does not guarantee a complete firmware drop-in replacement. This product page combines verified manufacturer and distributor information with package, purchasing, comparison, and design guidance. Pricing and availability should be checked against the cited distributor listings as of 2026-10-22 before committing a production BOM.

طلب عرض سعر اتصل بنا