المنتجات (46,000+)

SY87701LHI - 1.25Gbps AnyRate CDR | Microchip Technology
SY87701LHI

SY87701LHI - 1.25Gbps AnyRate CDR | Microchip Technology

Microchip Technology SY87701LHI is a 3.3 V AnyRate clock and data recovery (CDR) integrated circuit designed for data rates from 32 Mbps to 1.25 Gbps, packaged in a 32-pin TQFP with an exposed pad. It recovers clock and data from NRZ data streams and generates clock signals from data as high as 1.25 Gbps, making it suitable for telecommunications timing, SONET/SDH, ATM, and other high-speed serial interfaces. A clock and data recovery IC is a timing subsystem that extracts a usable serial clock from an incoming data stream and aligns recovered data with that clock. Within the broader semiconductor hierarchy, the SY87701LHI is an integrated circuit, a clock and timing device, and a CDR. Its AnyRate architecture supports multiple line rates through one clock-recovery solution, reducing the need for separate recovery devices in multi-rate systems. Key verified characteristics include a 3.3 V power supply, an operating data-rate range of 32 Mbps to 1.25 Gbps, NRZ data recovery, and clock generation from a 1.25 Gbps stream. The device also provides an industrial-temperature option, according to the retrieved product documentation. The manufacturer documentation states that the PLL complies with the proposed jitter specifications for SONET/SDH equipment in Bellcore Specifications GR-253-CORE, Issue 2, December 1995 and ITU-T Recommendation G.958 when used with differential inputs and outputs. The device is intended for telecommunications equipment operating at OC-3, OC-12, and related serial-data rates. Its differential interface architecture and integrated clock-recovery function make it relevant to line cards, optical interface modules, SONET/SDH terminal equipment, ATM equipment, and other designs requiring synchronized NRZ data transfer. The exposed-pad TQFP construction also requires attention to thermal dissipation and PCB thermal design. A key design consideration is that the SY87701LHI is a high-speed timing device rather than a general-purpose logic IC. Differential routing, controlled impedance, solid reference planes, short return paths, and careful decoupling are essential for predictable signal integrity. The application circuit and pin assignments should be taken directly from the manufacturer datasheet, including the exposed-pad connection and differential input or output requirements. This product page consolidates the verified 3.3 V supply, 32 Mbps to 1.25 Gbps AnyRate operation, package information, timing-standard references, sourcing links, and practical integration guidance. Pin-level details not exposed in the supplied search evidence are intentionally left unspecified rather than inferred, allowing engineers to download the manufacturer PDF before layout or schematic release.

طلب عرض سعر اتصل بنا
SY87701LSI - 1.25Gbps Clock Data Recovery IC | Microchip
SY87701LSI

SY87701LSI - 1.25Gbps Clock Data Recovery IC | Microchip

Microchip SY87701LSI is a 3.3 V clock and data recovery (CDR) integrated circuit designed for protocol-independent recovery of serial data from 32 Mbps to 1.25 Gbps. The device combines clock and data recovery functions in a 28-lead SOIC package, making it suitable for high-speed telecommunications, networking, storage, and backplane interfaces. Its principal advantages are protocol independence, operation from a 3.3 V supply, and support for data rates extending to 1.25 Gbps. A clock and data recovery IC is a timing-integrity device that reconstructs a usable clock from a combined or separated serial-data stream. In the broader semiconductor hierarchy, a CDR is a clock-and-timing IC used to recover timing information corrupted by noise, jitter, propagation delay, and bandwidth loss. The SY87701 family therefore occupies the interface between high-speed serial communication and the clock-generation circuitry required by transmitters, receivers, serializers, and deserializers. The verified source information identifies the SY87701 as an AnyRate CDR operating from 32 Mbps to 1.25 Gbps at 3.3 V. AnyRate operation allows the same device to serve multiple link rates without changing the external data rate, which can simplify qualification inventories for equipment supporting more than one serial interface. The SY87701LSI orderable variant is listed with an advanced 28-lead SOIC package, although separate distributor snippets inconsistently describe the family with other package configurations. Protocol independence is the most important architectural feature for engineers evaluating this part. Instead of imposing a fixed encoding or transport protocol, the recovery circuitry is intended to work across compatible serial links. In a receive path, the recovered clock can provide a timing reference for subsequent deserialization or digital processing. Design work still requires checking the specific protocol, jitter tolerance, reference-clock requirements, input sensitivity, output characteristics, and board-level constraints in the manufacturer datasheet before release to production. Typical uses include telecom line cards, router and switch interfaces, optical-network equipment, backplane links, clock-generation subsystems, and high-speed test equipment. The device may be especially relevant where a 32 Mbps-to-1.25 Gbps AnyRate range is useful across a family of products. Designers should account for high-speed transmission-line behavior, controlled impedance, receiver sensitivity, reference-clock jitter, and connector or package parasitics when laying out the PCB. A critical design consideration is that distributor package descriptions are not fully consistent for the SY87701 family. The available source identifies SY87701LSI as a 28-lead SOIC variant, while other family listings mention a 32-pin TQFP. Confirm the exact mechanical drawing, pin numbering, exposed-pad requirements, and exposed pad status directly against the manufacturer documentation before ordering or substituting any related MPN. This page consolidates the verified Microchip family data, distributor availability information, sourcing links, and engineering guidance into one component record. It also distinguishes confirmed attributes from parameters that still require the manufacturer datasheet, helping engineers evaluate SY87701LSI without treating incomplete distributor descriptions as verified specifications.

طلب عرض سعر اتصل بنا
SY87701LZG - 1.25Gbps AnyRate CDR | Microchip | 28-SOIC
SY87701LZG

SY87701LZG - 1.25Gbps AnyRate CDR | Microchip | 28-SOIC

The Microchip Technology SY87701LZG is a 3.3 V clock and data recovery (CDR) integrated circuit designed for serial data rates from 32 Mbps to 1.25 Gbps. It supports NRZ data streams, provides one recovered-clock output, and is packaged in a 28-pin SOIC. The device is intended for high-speed telecom, Ethernet, SONET/SDH, ATM, FDDI, and related optical-network interface applications. A clock and data recovery integrated circuit is a timing-recovery semiconductor that extracts a usable clock from a serial data stream and aligns recovered timing with the incoming data. The CDR belongs to the clock and timing IC hierarchy, where it complements clock generators, buffers, phase-locked loops, and other clock-management circuitry used in telecommunications and digital data links. The SY87701LZG operates from a 3.3 V power supply and recovers clock and data from serial NRZ streams spanning 32 Mbps to 1.25 Gbps. Its AnyRate operating concept allows one clock-and-data recovery function to serve a broad range of line rates. The device includes one clock output according to the product classification for the 28-SOIC package. The core engineering value of the SY87701LZG is interface consolidation. Combining clock recovery with data handling in one dedicated IC can reduce the number of separate timing components required around a high-speed serial transceiver. Its stated compliance with Bellcore, ITU/CCITT, and ANSI specifications supports use in telecom-oriented designs, including OC-3, OC-12, ATM, and FDDI applications. Typical uses include SONET/SDH line interfaces, ATM equipment, Ethernet links, FDDI systems, and other optical-transport paths operating up to 1.25 Gbps. The device is particularly relevant where the receiver must reconstruct timing from an incoming NRZ stream rather than relying on a separate source-synchronous clock. Design work should center on signal integrity, supply decoupling, input/output termination, and correct implementation of the manufacturer's reference interface. Because this is a high-speed timing device, trace geometry, return paths, connector transitions, and ground-plane continuity can materially affect recovered-clock quality even when the nominal data rate is within specification. This page consolidates the device classification, supported data-rate range, voltage, package, application coverage, verified sourcing links, and engineering guidance into one reference for evaluating the SY87701LZG in clock-and-data-recovery designs.

طلب عرض سعر اتصل بنا
SY87701LZI - 3.3V 1.25Gbps AnyRate CDR | Microchip Technology
SY87701LZI

SY87701LZI - 3.3V 1.25Gbps AnyRate CDR | Microchip Technology

The Microchip Technology SY87701LZI is a 3.3V AnyRate clock and data recovery IC for NRZ data streams operating from 32Mbps to 1.25Gbps, housed in a 28-pin SOIC package. The device performs clock and data recovery from data streams up to 1.25Gbps and generates a recovered clock up to 1.25Gbps, making it suitable for telecommunications and synchronous digital data links. An AnyRate clock and data recovery IC is a timing-recovery component that extracts a usable clock from a serial data stream and retimes the associated data. Its position within the broader semiconductor hierarchy is clock and timing IC → clock and data recovery IC → integrated circuit → semiconductor. The technology is intended for systems where the transmitting clock is not separately available at the receiver or where accumulated timing drift must be continuously corrected. The verified specifications identify a 3.3V power supply, an operating data-rate range of 32Mbps to 1.25Gbps, and recovery-clock generation up to 1.25Gbps. The SY87701LZI also has an industrial temperature-range option, according to the Micrel datasheet information included in the search results. These characteristics make the device relevant to telecom backplane links, optical transport systems and other high-speed serial interfaces operating with NRZ-coded data. The Micrel device is described as complying with Bellcore, ITU/CCITT and ANSI specifications for applications such as OC-3 and OC-12. It supports clock and data recovery directly from an NRZ data stream, reducing the need for separate source-synchronous clocking across long or timing-sensitive interconnects. Exact architecture details, loop bandwidth, input sensitivity, jitter tolerance, supply-current limits and pin-level signal definitions are not available in the supplied verified records and therefore require confirmation from the manufacturer datasheet. Typical applications include SONET or optical-transport equipment, telecom line cards, high-speed backplanes and serial data links requiring recovered clock and data outputs. In an OC-3-class interface, its 1.25Gbps maximum recovery rate provides operating margin above the nominal line rate. In a lower-rate telecom or proprietary serial link, the 32Mbps lower limit allows one device family to cover multiple interface rates when the surrounding system supports the required encoding and reference-clock architecture. Designers should confirm the exact pin assignment, reference-clock requirements, input and output logic levels, jitter characteristics and recommended decoupling directly from the Micrel datasheet before layout. The 28-SOIC footprint requires careful high-speed routing, short return paths and controlled impedance. Input and output timing must be evaluated for the target data rate because compliance claims alone do not replace board-level signal-integrity validation. This page consolidates the verified distributor price, availability, package information and core SY87701LZI specifications, then adds practical sourcing, selection and implementation guidance. It also distinguishes verified facts from parameters that still require manufacturer confirmation, helping engineers avoid treating search-result summaries as a substitute for the complete datasheet.

طلب عرض سعر اتصل بنا
SY87701VHC - 1.25Gbps AnyRate CDR | Microchip Technology
SY87701VHC

SY87701VHC - 1.25Gbps AnyRate CDR | Microchip Technology

The Microchip Technology SY87701VHC is an AnyRate clock and data recovery multiplexer IC that supports NRZ data rates from 32 Mbps to 1.25 Gbps in a 32-pin TQFP exposed-pad package. It accepts 3.3 V or 5 V supply configurations, supports PECL or TTL inputs, and provides a PECL output for Ethernet, SONET/SDH, ATM, Fibre Channel, and other high-speed communication systems. A clock and data recovery IC, or CDR, is a specialized timing integrated circuit that extracts or regenerates a serial clock from a high-speed data stream and aligns the recovered data for downstream processing. The SY87701VHC belongs to the clock and timing IC hierarchy, where it combines clock recovery, data retiming, and multiplexing functions. Its AnyRate operating concept allows one circuit to serve multiple line rates rather than requiring a separate fixed-rate recovery device. Key features include support for 32 Mbps through 1.25 Gbps NRZ data, a maximum operating frequency of 1.25 Gbps, 3.3 V and 5 V power-supply options, and PECL or TTL input compatibility. The recovered clock can operate at up to 1.25 Gbps, while the PECL output is suitable for high-speed optical, ATM, SONET/SDH, and Fibre Channel interfaces. The exposed pad supports improved thermal performance on a 7 mm × 7 mm surface-mount package. The SY87701VHC integrates a phase-locked-loop-based clock recovery architecture with clock and data multiplexing functions. This architecture allows a shared source to feed the device while the internal recovery and multiplexing paths support high-speed serial links. Its dual input and output logic families make it useful when a board must interface between TTL/CMOS-style digital sources and ECL-family PECL links, although input levels, termination, and supply voltage must be verified against the manufacturer datasheet. Typical applications include 1.25 Gbps Fibre Channel equipment, ATM switching systems, SONET/SDH line interfaces, Ethernet transmission equipment, and other recovered-clock or retimed-data designs. The device is most appropriate where a designer needs multiple supported rates, direct clock recovery, and a multiplexed high-speed output within one communication subsystem. A critical design consideration is that high-speed PECL and TTL interfaces require controlled impedance routing, correct reference-plane return paths, and carefully placed termination. Power and ground distribution must also be designed to limit disturbance from the clock recovery circuitry. Before layout, engineers should confirm the exact pin assignment, differential clock requirements, input thresholds, and exposed-pad connection details in the manufacturer datasheet. This page consolidates the verified distributor specifications, source links, package information, pricing status, application guidance, and data limitations for SY87701VHC. It also distinguishes verified facts from parameters that still require confirmation from the manufacturer datasheet, helping engineers evaluate the IC without relying on unverified substitute parts.

طلب عرض سعر اتصل بنا
SY87701VHH - 1.25Gbps Clock Recovery IC | Microchip
SY87701VHH

SY87701VHH - 1.25Gbps Clock Recovery IC | Microchip

The Microchip Technology SY87701VHH is a 1.25 Gbps clock and data recovery (CDR) multiplexer IC designed for Ethernet, SONET/SDH, and ATM applications. It operates from a 3.3 V or 5 V supply, provides one recovered-clock output, and is packaged in a 32-pin TQFP with exposed pad (EP) measuring 7 mm by 7 mm. Its core function is to recover a usable clock from an incoming serial NRZ data stream while supporting clock generation and link-failure behavior. A clock and data recovery IC is a specialized timing-control device within the clock and timing IC hierarchy. It extracts timing information from a serial data stream, regenerates a stable clock, and can retime data when the receiving system requires deterministic edge placement. In optical and packet-network equipment, this function supports line-card receivers, multiplexers, test equipment, and other interfaces operating at high serial-data rates. According to the Microchip SY87701V datasheet, the device supports data rates from 32 Mbps to 1.25 Gbps. This range allows one circuit to serve multiple transport and networking formats, including OC-3, OC-12, ATM, and FDDI-related applications cited in the technical documentation. The integrated link fault indication circuit monitors the integrity of the serial inputs and forces the PLL to lock to the local reference clock when the received data fails the frequency test. Internally, the SY87701V combines clock recovery, data retiming, and multiplexing functions. The recovered output can maintain the correct output frequency during loss-of-signal or loss-of-lock conditions by referring to the local reference. This behavior helps downstream logic continue operating deterministically while the link is impaired, although system fault management must still detect and report the failed link through the indication circuitry. Typical uses include telecommunications line cards, ATM and SONET/SDH transport equipment, Ethernet interface assemblies, optical-network test systems, and clock-generation subsystems. The device is particularly relevant when a board must recover timing from an NRZ stream while maintaining a predictable reference-clock relationship during link transitions. The main PCB-design consideration is the exposed-pad thermal and electrical interface. The 7 mm by 7 mm TQFP-EP package requires its exposed pad to be connected to the intended ground plane and soldered according to the package land pattern. High-speed data and clock traces should also follow the layout guidance in the manufacturer datasheet to limit reflections and preserve timing margin. This page combines the manufacturer datasheet information with package details, application guidance, and the documented link-recovery behavior of the SY87701VHH. It also distinguishes the directly replaceable SY87701VHC from the broader clock-recovery design choices, helping engineers evaluate footprint compatibility, data-rate suitability, and recovery behavior before committing a board revision.

طلب عرض سعر اتصل بنا
SY87701VSC - 1.25 Gbps Clock/Data Recovery IC | Microchip
SY87701VSC

SY87701VSC - 1.25 Gbps Clock/Data Recovery IC | Microchip

Microchip Technology SY87701VSC is a protocol-independent clock and data recovery IC designed to recover clock and data signals at data rates from 32 Mbps to 1.25 Gbps. The device is supplied in a 32-pin TQFP package with an exposed pad and is intended for Ethernet, SONET/SDH, and ATM signal-chain applications. Its principal functions are parallel-to-serial conversion, clock and data recovery, multiplexing, and serializer output. A clock and data recovery IC, commonly abbreviated CDR, belongs to the clock-and-timing IC hierarchy and provides the timing reference needed by high-speed serial links. Unlike a receiver that only detects transitions, a CDR extracts or reconstructs a usable clock from a serial data stream and aligns recovered data with that clock. The SY87701 therefore supports systems that need deterministic timing, serial-to-parallel or parallel-to-serial conversion, and multiplexing between high-speed data paths. The manufacturer datasheet identifies the SY87701 as a protocol-independent CDR capable of operation through 1.25 Gbps. It is associated with Ethernet, SONET/SDH, and ATM applications, allowing the same device family to address multiple telecommunications and networking signal formats. The 32-TQFP exposed-pad package provides a defined PCB footprint and a central thermal connection for power handling and ground-plane connection. Its clock and data recovery architecture separates the device from generic fixed-format transceivers. Protocol independence allows the surrounding system to establish the required framing and encoding, while the CDR handles the critical task of maintaining clock-to-data alignment. At high data rates, this alignment directly affects whether the receiver can distinguish valid data from timing uncertainty and transition noise. Typical implementation areas include Ethernet line interfaces, SONET/SDH transport equipment, ATM networking systems, optical-module signal paths, and test equipment that reproduces high-speed serial links. The device can be especially relevant where a parallel source must be serialized or where a received serial stream must be converted into a parallel bus for downstream digital processing. When laying out a board for the SY87701VSC, preserve the manufacturer's recommended high-speed differential and bypass-connection topology. Keep the exposed pad tied to the designated ground plane, place input and output decoupling capacitors close to their associated pins, and maintain controlled impedance on high-speed signal routes. Differential routing symmetry and short return paths are important because even small timing skew can reduce margin at 1.25 Gbps. This product record combines the verified device classification, speed, package, and application information with engineering guidance for footprint reuse, high-speed layout, thermal implementation, and replacement assessment. It also distinguishes verified drop-in replacements from generic functional substitutes, helping engineers confirm pin-level and parameter-level compatibility before modifying a production design.

طلب عرض سعر اتصل بنا
SY87701VZC - 1.25Gbps AnyRate CDR | Microchip | SONET
SY87701VZC

SY87701VZC - 1.25Gbps AnyRate CDR | Microchip | SONET

The Microchip Technology SY87701VZC is a clock and data recovery IC with a multiplexer function, designed for data rates from 32 Mbps to 1.25 Gbps. It supports 3.3 V and 5 V supply options, accepts PECL input, includes a PLL, and provides one clock output in a 28-pin SOIC package. The device targets Ethernet, SONET/SDH, ATM, FDDI, and Fibre Channel network-interface applications. A clock and data recovery IC is a specialized timing IC that reconstructs a synchronized clock from a serial data stream and removes timing distortion introduced by transmission lines, connectors, and other circuit elements. In the broader semiconductor hierarchy, the SY87701VZC belongs to the clock and timing IC class, where it combines phase-locked-loop technology, data recovery, and multiplexing functions for high-speed serial communication equipment. Key features include AnyRate operation from 32 Mbps through 1.25 Gbps, support for both 3.3 V and 5 V power-supply options, one recovered-clock output, and a PECL input interface. The manufacturer datasheet identifies the device as suitable for Bellcore, ITU/CCITT, and ANSI-based telecom specifications, including OC-3, OC-12, ATM, FDDI, and Fibre Channel interfaces. Its 28-pin SOIC construction supports conventional surface-mount assembly. The internal PLL allows the circuit to derive a stable clock relationship from the incoming high-speed stream rather than relying on a separate fixed-frequency source. In an AnyRate implementation, the recovery function must maintain alignment across a broad range of line rates, making the SY87701VZC appropriate for network interfaces, telecom backplanes, and legacy optical-network equipment. PECL signal levels provide a high-speed differential-style logic environment commonly used in telecom and data-communication systems. Typical applications include OC-3 and OC-12 SONET/SDH interfaces, ATM equipment, Ethernet network interfaces, FDDI links, and Fibre Channel transceivers. The 1.25 Gbps upper rate aligns with widely deployed Gigabit-class transport links, while the lower operating range allows the same recovery architecture to address slower network streams. Designers should verify input logic thresholds, output interface levels, supply sequencing, reference-component values, and loop bandwidth against the manufacturer application circuit before releasing a PCB. Differential signal routing, short return paths, controlled-impedance geometry, and separation from high-current switching circuitry are especially important when recovering timing from marginal data signals. This page organizes the manufacturer datasheet characteristics, sourcing information, application guidance, design cautions, and verified replacement status into a compact engineering reference. It also distinguishes a true pin-compatible replacement from devices that are merely functionally similar, helping PCB designers avoid unnecessary respins or signal-integrity changes.

طلب عرض سعر اتصل بنا
SY87701VZH - 1.25Gbps AnyRate CDR | Microchip Technology
SY87701VZH

SY87701VZH - 1.25Gbps AnyRate CDR | Microchip Technology

The Microchip Technology SY87701VZH is an AnyRate clock and data recovery IC for 32 Mbps to 1.25 Gbps NRZ data streams, offered in a 28-pin SOIC package with 3.3 V and 5 V power-supply options. It provides one recovered clock output and supports clock generation as well as clock and data recovery for Ethernet, SONET/SDH, and ATM equipment. A clock and data recovery IC is a timing IC that reconstructs a usable clock from a serial data stream whose original clock has become embedded in the data or has otherwise become unusable. In the broader semiconductor hierarchy, a CDR belongs to clock and timing ICs, which support communication ICs and network infrastructure equipment. The SY87701 is designed for protocol-independent recovery over a broad speed range rather than one fixed line rate. The primary operating range is 32 Mbps to 1.25 Gbps using NRZ signaling. The device can recover clock and data or generate clock from a suitable input stream, giving system designers flexibility across optical, serial-network, and test-equipment signal paths. Its 3.3 V and 5 V supply options broaden its use across communications equipment, while the single recovered-clock output provides a straightforward clock-recovery function. The SY87701 family is associated with Bellcore, ITU/CCITT, and ANSI applications including OC-3, OC-12, ATM, and FDDI environments. These references describe the communications standards and legacy transport systems addressed by the device; they do not imply that every downstream equipment design automatically meets a complete compliance specification. System designers must still control the source, data path, jitter tolerance, and output interface. Typical uses include Ethernet line cards, SONET/SDH transport modules, ATM equipment, clock-recovery modules, and instrumentation that accepts NRZ serial data. In these systems, the recovered clock can provide a timing reference for deserializers, controllers, or downstream digital logic. Its AnyRate capability is especially useful when a product family must support several standardized line rates with one clock-recovery device. Designers should preserve the differential data and clock topology recommended by the manufacturer datasheet, provide clean return paths, and validate timing margins across the complete 32 Mbps to 1.25 Gbps range. Input amplitude, jitter, duty-cycle distortion, and board loss can constrain usable margin even when the nominal data-rate range is supported. This product page combines verified manufacturer and distributor information with package, sourcing, application, and design guidance. It also distinguishes the tube-packaged SY87701VZH from related ordering information and documents the limits of the available substitute and compliance data rather than inferring unverified drop-in replacements.

طلب عرض سعر اتصل بنا
SY87702LHI - 2.5Gbps AnyRate CDR Multiplexer | Microchip Technology
SY87702LHI

SY87702LHI - 2.5Gbps AnyRate CDR Multiplexer | Microchip Technology

The Microchip Technology SY87702LHI is a 3.3 V AnyRate clock and data recovery (CDR) multiplexer IC supporting data rates from 28 Mbps to 2.5 Gbps in a 64-TQFP exposed-pad package. It combines clock and data recovery with an integrated multiplexer and provides differential PECL inputs and outputs together with CML outputs for high-speed communications. A clock and data recovery IC is a timing-integrity component that reconstructs a synchronous clock from a serialized data stream. In the signal hierarchy, a CDR supports the clock and timing IC family, which belongs to broader digital and mixed-signal semiconductor systems. Recovering clock and data together helps a receiver establish the timing relationship required to process high-speed serial links accurately. The SY87702LHI supports operation across a broad 28 Mbps to 2.5 Gbps range. Its 3.3 V supply operation suits modern communications equipment, while differential PECL and CML interfaces support high-speed point-to-point links. The integrated multiplexer reduces the number of separate timing and routing components required in systems that must handle multiple data paths. The device has one recovered output according to its distributor product classification. The device is associated with Ethernet, SONET/SDH, and ATM applications, and its architecture also supports bandwidth-sensitive infrastructure such as Fibre Channel and Gigabit Ethernet. Differential signaling helps transmit clock and data information across a controlled-impedance board environment. CML outputs provide an additional interface choice for designs using compatible high-speed receivers and termination networks. The 64-TQFP-EP package provides 64 signal pins plus an exposed thermal pad. It is a surface-mount solution suitable for multilayer PCB construction, although exposed-pad layout and thermal management must follow the package requirements. Care is especially important because high-speed differential routing, controlled impedance, short return paths, and proper decoupling materially affect signal integrity. When designing around the SY87702LHI, begin by confirming that the selected data rate, interface voltage levels, reference-clock arrangement, and recovery mode match the system requirements. Preserve the differential-impedance geometry specified by the manufacturer and provide low-inductance connections from the power and ground pins to the decoupling network. Verify timing margins and loss budget at the intended signaling rate. This product overview combines the SY87702LHI operating characteristics with application guidance, package details, interface considerations, and replacement guidance. It is intended to help engineers identify where the 3.3 V, 2.5 Gbps AnyRate architecture fits and which design parameters must be checked before committing the device to a high-speed PCB layout.

طلب عرض سعر اتصل بنا
SY87721LHG - 2.7Gbps AnyRate CDR | Microchip Technology
SY87721LHG

SY87721LHG - 2.7Gbps AnyRate CDR | Microchip Technology

The Microchip Technology SY87721LHG is a 3.3 V AnyRate clock and data recovery unit with an integrated clock multiplier, designed to recover data and clock from signals operating from 28 Mbps to 2.7 Gbps. The device provides one recovered-clock output and is packaged in a 64-pin TQFP with exposed pad measuring 10 mm by 10 mm. An AnyRate clock and data recovery unit is a specialized timing IC that separates clock information from a serial data stream and reconstructs a clean, phase-aligned output clock. In the broader semiconductor hierarchy, it belongs to the clock and timing IC family, where clock and data recovery ICs support high-speed serial communication, optical transport, storage networks, and legacy telecommunications infrastructure. The principal operating parameters are a 3.3 V supply, a minimum line rate of 28 Mbps, a maximum line rate of 2.7 Gbps, and one recovered output. Its AnyRate architecture is intended to accommodate widely different stream rates without requiring a separate fixed-rate recovery design for every protocol. The integrated clock multiplier adds clock-generation capability within the same recovery system, reducing the need for additional clock support in suitable designs. The manufacturer describes the device for Ethernet, SONET/SDH, ATM, Fibre Channel, and other high-speed serial applications. These systems require deterministic clock recovery because upstream switching, line coding, transmission, and reception can introduce timing offsets and jitter. By recovering data and clock together, the SY87721LHG supports alignment at the receiver while the recovered clock can drive downstream circuitry. Typical uses include optical network terminal equipment, Fibre Channel links, ATM interfaces, SONET/SDH transport paths, and clock-recovery blocks within Gigabit Ethernet designs. The 2.7 Gbps upper rate covers legacy high-speed serial links, while the 28 Mbps lower limit allows the recovery function to cover a broad rate range. Designers should follow the manufacturer datasheet for the complete pin-description table, reference circuitry, loopback arrangement, and exposed-pad land pattern. Particular attention is required for high-speed differential routing, controlled clock topology, power and ground distribution, and thermal management of the exposed pad. The absence of a high-frequency switching stage does not eliminate return-path and supply-noise concerns. This product page combines the verified operating limits, package information, application context, sourcing workflow, and structured engineering guidance. It also distinguishes confirmed characteristics from details that must be established from the complete manufacturer datasheet before schematic capture, signal-integrity simulation, or production release.

طلب عرض سعر اتصل بنا
SY87721LHI - 2.7Gbps AnyRate CDR | Microchip Technology
SY87721LHI

SY87721LHI - 2.7Gbps AnyRate CDR | Microchip Technology

The Microchip Technology SY87721LHI is a 3.3 V AnyRate clock and data recovery IC with an integrated clock multiplier, supporting data rates from 28 Mbps to 2.7 Gbps. It is supplied in a 64-pin TQFP exposed-pad package measuring 10 mm by 10 mm. A clock and data recovery IC, commonly called a CDR, reconstructs a stable timing reference from a serial data stream that may have accumulated clock, phase, or frequency uncertainty. The CDR sits within the physical-layer signal path between a high-speed transceiver and the digital logic that processes the recovered payload. The SY87721LHI combines this timing-recovery function with an integrated clock multiplier for systems requiring both recovered data and a derived reference clock. Key features include support for data rates from 28 Mbps through 2.7 Gbps, operation from a single 3.3 V supply, and one recovered output. Its AnyRate architecture is designed for SONET/SDH, ATM, Gigabit Ethernet, Fast Ethernet, Fibre Channel, IEEE 1394, and InfiniBand-related links. The device is intended for telecommunications, optical-networking, storage-network, and high-speed serial-interface equipment where the transmitter and receiver clock domains can differ. The integrated clock multiplier supports systems in which a recovered clock must be translated into another required operating frequency. This avoids assigning a separate multiplier to a design when the link interface already contains a suitable recovery and clock-generation block. The device is positioned for endpoint and line-card designs requiring deterministic serial-clock recovery over a broad operating-rate range rather than a fixed-rate-only recovery function. Typical implementations include SONET/SDH line interfaces, ATM and Gigabit Ethernet backplanes, Fibre Channel links, IEEE 1394 connections, and InfiniBand equipment. In each case, the circuit interfaces with high-speed serialized data and supplies timing that must remain aligned with the incoming signal. Board-level design should preserve high-speed signal integrity because jitter, impedance discontinuities, and return-path discontinuities directly affect recovery performance. For a new layout, use the manufacturer pin-description table to assign power, ground, serial-data, reference-clock, and multiplier connections exactly. Place bypass capacitors close to the supply pins and keep the exposed thermal and electrical pad connected to a low-impedance ground plane according to the package land pattern. Confirm that the selected reference-clock source, loop filter, and external components support the intended data rate before production release. This product page combines the published operating limits with practical guidance for clock-and-data recovery, package implementation, and interface selection. It also distinguishes verified drop-in replacements from parts that merely share a broad communication function, helping engineers confirm footprint, pin assignment, and rate compatibility before modifying an existing PCB.

طلب عرض سعر اتصل بنا
SY87721LHY - 2.7GHz Clock/Data Recovery IC | Microchip
SY87721LHY

SY87721LHY - 2.7GHz Clock/Data Recovery IC | Microchip

The Microchip Technology SY87721LHY is an application-specific clock and data recovery integrated circuit with one output, a maximum operating frequency of 2.7 GHz, and operation across 28 Mbps to 2.7 Gbps. The device is packaged in a 64-pin TQFP with exposed pad, a surface-mount configuration designed for high-speed communications equipment. A clock and data recovery IC, or CDR, is a timing IC that extracts or reconstructs a serial data stream and aligns it with a recovered or multiplied clock. Within the clock and timing hierarchy, the SY87721LHY belongs to the application-specific clock/timing category and supports Ethernet, SONET/SDH, and ATM equipment. Its integrated clock multiplier allows the recovered timing information to be reused within high-speed line-card and network-interface designs. Key characteristics include a 3.15 V to 3.45 V supply range, support for data rates from 28 Mbps through 2.7 Gbps, one clock or recovered-data output, and CML or PECL-compatible output signaling. The listed operating-temperature range is -40°C to 85°C, allowing use across industrial temperature grades while maintaining the high-speed timing performance required by serial links. The SY87721LHY integrates clock and data recovery with a clock multiplier in one package. This consolidation can reduce the number of separate timing components required in a communications design. At the upper end of its stated range, its 2.7 GHz capability addresses demanding SONET/SDH and related network transmission systems, while the lower 28 Mbps rate supports lower-speed recovered-clock interfaces. Typical applications include Ethernet line cards, SONET/SDH transport equipment, ATM networking systems, optical-network interface assemblies, serial backplanes, and high-speed clock-distribution subsystems. The exposed-pad TQFP package also provides a thermal path to the PCB, which is important when high-speed devices dissipate power in compact communications hardware. Design the power supply and decoupling network for the specified 3.15 V to 3.45 V range, and confirm that the PCB accommodates the exposed thermal pad. Use the manufacturer pin-description and reference-layout information when assigning high-speed inputs and outputs because trace length, return paths, and decoupling placement can materially affect signal integrity. This page organizes the SY87721LHY's core timing specifications, packaging, application guidance, and sourcing information. It also distinguishes verified device characteristics from parameters that require direct confirmation from the manufacturer datasheet, helping engineers plan a new design or assess an existing PCB revision.

طلب عرض سعر اتصل بنا
SY87724LHI - 2.7GHz AnyRate MUX/DEMUX | Microchip Technology
SY87724LHI

SY87724LHI - 2.7GHz AnyRate MUX/DEMUX | Microchip Technology

The Microchip Technology SY87724LHI is a 3.3 V AnyRate multiplexed and demultiplexed interface IC that supports operation up to 2.7 GHz. The device provides two channels in an 80-lead TQFP package with an exposed thermal pad, measuring 14 mm by 14 mm. Its surface-mount construction is intended for modern high-speed communication and networking equipment in which protocol-transparent signal routing is required. An AnyRate MUX/DEMUX is a signal-routing interface that can place multiple communication channels onto a shared physical interface. The MUX function combines parallel or serial data sources, while the DEMUX function separates a shared input into individual outputs. A protocol-transparent device does not interpret or modify the transported payload, allowing existing framing, encoding, and signaling systems to operate without changing their data format. The SY87724LHI supports protocol-transparent MUX/DEMUX operation up to 2.7 GHz and includes programmable or 10-bit parallel interfaces. Differential clock and serial input/output capabilities support high-speed point-to-point links, while control by framer logic permits the device to follow the timing boundaries established by surrounding network equipment. Synchronous frame-boundary indication helps downstream circuitry determine valid data intervals. The device uses differential signaling for clock and data paths, which supports the controlled impedance and noise-management practices commonly required in high-speed PCB layouts. Its AnyRate architecture is particularly useful where several physical lanes must be consolidated before transmission or distributed after reception. The 3.3 V supply operation also allows integration with communication ICs operating in conventional 3.3 V signal environments. Typical applications include network interface equipment, telecommunications line cards, framer and backplane systems, serial links, clock-distribution networks, and data-routing assemblies. The SY87724LHI can also support test equipment when several high-speed signals must be selected without changing the underlying protocol. The exposed thermal pad assists heat transfer from the device to the PCB during operation. PCB implementation requires careful treatment of the 80-TQFP footprint, including thermal-via placement beneath the exposed pad and controlled-impedance routing for differential clock and serial signals. The input, output, power, and ground connections should be assigned directly from the manufacturer pin-description table and pinout diagram. Because this device operates above 2 GHz, component placement, return paths, connector transitions, and via stubs can materially affect signal integrity. This product page organizes the SY87724LHI specifications, interface roles, package information, sourcing workflow, and design considerations into one engineering reference. It also distinguishes verified device characteristics from specifications that require confirmation, helping designers evaluate the IC before assigning its 80-pin footprint and high-speed differential interfaces to a communication board.

طلب عرض سعر اتصل بنا
SY87724LHY - 3.3V 2.7GHz AnyRate MUX/DEMUX | Microchip
SY87724LHY

SY87724LHY - 3.3V 2.7GHz AnyRate MUX/DEMUX | Microchip

The Microchip Technology SY87724LHY is a 3.3 V AnyRate serial-data multiplexer and demultiplexer capable of operating up to 2.7 GHz in an 80-pin TQFP package. It supports protocol-transparent multiplexing and demultiplexing for 4-bit, 5-bit, 8-bit, and 10-bit-wide buses, with programmable or 10-bit parallel interfaces for integration with framer logic. Differential clock and serial input and output paths support high-speed telecommunications and data-processing systems. An AnyRate multiplexer/demultiplexer is a high-speed interface IC that redistributes serial data across parallel-width channels while allowing the data rate to be adapted according to system requirements. In the interface hierarchy, the SY87724LHY belongs to the MUX/DEMUX class of interface ICs and ultimately functions as a semiconductor signal-routing device. Its protocol-transparent architecture separates traffic-management functions from the lower-level data format, simplifying integration into network equipment. The principal operating characteristics are a 3.3 V supply, operation up to 2.7 GHz, support for 4-, 5-, 8-, and 10-bit bus widths, and a programmable or 10-bit parallel control interface. Differential clock inputs and differential serial data paths are important for systems operating at multi-gigabit line rates. Synchronous frame-boundary indication gives the surrounding framer logic a defined timing reference for identifying frame boundaries. The SY87724LHY is designed for protocol-transparent MUX/DEMUX operation, allowing it to combine or separate serial lanes without becoming dependent on one specific packet format. The availability of several supported bus widths makes it useful where equipment must accommodate different aggregation levels. Programmable operation provides additional flexibility when system traffic rates or board configurations differ, while the 10-bit parallel interface supports direct connection to compatible framer and line-card control logic. Typical applications include telecommunications line cards, network switches, routers, serial backplane equipment, and high-speed test systems. In these systems, the device can aggregate several narrow serial channels into a wider internal bus or distribute a wide channel into narrower external links. Synchronous frame-boundary information supports equipment that must maintain deterministic framing relationships across multiplexed or demultiplexed data paths. PCB design should prioritize controlled-impedance routing for differential clock and data nets, with symmetrical geometry and continuous reference planes. The 80-pin TQFP also requires careful thermal and power distribution because high-speed interface ICs can combine substantial switching activity with a 3.3 V supply. Decoupling should be placed directly at supply pins, while exposed-pad or thermal requirements must follow the package drawing in the manufacturer documentation. This page consolidates the device function, operating limits, package information, comparison points, and practical interface-design guidance. It also distinguishes the exact SY87724LHY ordering code from related family documentation and highlights where additional electrical or pin-level information is needed before schematic release.

طلب عرض سعر اتصل بنا
SY87729LHG - 365MHz Fractional Clock Synthesizer | Microchip
SY87729LHG

SY87729LHG - 365MHz Fractional Clock Synthesizer | Microchip

The Microchip Technology SY87729LHG is a 365 MHz fractional-N clock synthesizer IC with one differential PECL output, packaged in a 32-pin TQFP with exposed pad. The supplied product information identifies it as an AnyClock device for Ethernet, Fibre Channel, SONET/SDH/ATM, and related networking infrastructure. Its 3.15 V minimum supply voltage, 3.3 V operating class, 1:1 input-to-output ratio, and differential signal arrangement support clock-generation requirements where deterministic, low-skew distribution is important. A fractional-N synthesizer is a clock-and-timing IC that uses a phase-locked loop to create an output frequency related to a reference frequency while supporting fractional division. Within the clock-and-timing hierarchy, the SY87729LHG belongs to the PLL-based synthesizer category. This positioning distinguishes it from simple oscillators and fixed-ratio clock buffers: the device is intended to derive precise communications-clock frequencies from an external reference and then deliver a differential PECL output. The verified product record identifies the SY87729LHG as a monolithic fractional synthesizer with PLL capability, one output circuit, a 1:1 input-to-output ratio, and differential input and output operation. Its maximum frequency is listed as 365 MHz. The part is marked obsolete in the supplied datasheet-derived listing, so it should be treated as a legacy clock source for maintenance, replication, and redesign analysis rather than a recommended choice for a new production program. The SY87729LHG is particularly relevant to networking equipment requiring Ethernet, Fibre Channel, or SONET/SDH/ATM clocking. A single output allows it to support a dedicated clock-generation channel, although system-level designs may require additional buffers, dividers, or distribution ICs. Differential PECL interfacing can reduce susceptibility to common-mode noise when the source and receiver use controlled impedance and properly terminated networks. Designers should verify the complete pinout, reference requirements, jitter specifications, supply tolerances, and exposed-pad land pattern from the manufacturer datasheet before making a replacement. The exposed pad requires a low-impedance ground connection and adequate thermal copper. Differential input and output traces should have controlled impedance, short return paths, and symmetrical routing. This product record combines the verified 365 MHz fractional-synthesizer specifications, package information, lifecycle status, and source links with explicit uncertainty markers where pricing and detailed electrical data were not available. It also separates genuinely verified drop-in alternatives from unverified cross-reference results so engineers can make a safer sourcing and redesign decision.

طلب عرض سعر اتصل بنا
SY87729LHI - 365MHz Fractional-N Clock Synthesizer | Microchip
SY87729LHI

SY87729LHI - 365MHz Fractional-N Clock Synthesizer | Microchip

The Microchip Technology SY87729LHI is a fractional-N clock synthesizer IC with a 27 MHz input, a maximum output frequency of 365 MHz, one clock output, and differential PECL interfaces. It operates from a 3.15 V to 3.45 V supply in a 32-pin TQFP exposed-pad package. The SY87729LHI is intended for telecommunications clocking applications involving Ethernet, Fibre Channel, SONET, SDH, and ATM systems. A clock synthesizer is a clock-and-timing semiconductor that converts one or more reference inputs into synchronized output clock signals. Fractional-N architectures divide an integer reference frequency by an integer and a fractional ratio, allowing fine output-frequency resolution without changing the crystal reference itself. Within the broader semiconductor hierarchy, this device is a clock generator and timing IC used to support communication infrastructure, network equipment, and data-transmission systems. The verified product information identifies a 27 MHz reference input, operation up to 365 MHz, one output, PECL input and output interfaces, and a narrow 3.15 V to 3.45 V operating-supply range. Its operating temperature range is -40°C to 85°C. These characteristics make the device applicable where a conventional integer-N divider cannot provide the required output-frequency resolution. The fractional-N synthesis architecture supports programmable clock ratios while retaining an externally supplied reference. PECL signaling is intended for high-speed clock distribution in telecommunications equipment, although interface amplitude, termination, and routing require board-level verification. The 32-pin TQFP exposed-pad package provides a defined thermal path when the device is mounted with its exposed pad soldered according to the manufacturer land pattern. Typical uses include line-card clock generation, Ethernet and Fibre Channel interface modules, SONET or SDH transport equipment, and ATM-based network systems. In each case, the 365 MHz maximum output supports high-rate clock generation while the fractional division capability allows the output frequency to be adjusted more closely to the system requirement than an integer-only divider. Designers should verify all divider settings, output-drive strength, jitter, reference purity, and loop-bandwidth requirements against the manufacturer datasheet before production release. The 3.15 V to 3.45 V supply range requires a regulator or rail capable of maintaining the specified voltage, and the exposed pad needs careful PCB layout for effective heat removal. This page consolidates the verified SY87729LHI operating limits, package information, cross-reference results, procurement caveats, and engineering guidance. It also separates confirmed manufacturer-grade facts from unavailable details so designers can identify what must still be checked in the official SY87729LHI datasheet before schematic release.

طلب عرض سعر اتصل بنا
SY87729LHY - 365MHz Fractional-N Clock Synthesizer | Microchip
SY87729LHY

SY87729LHY - 365MHz Fractional-N Clock Synthesizer | Microchip

Microchip Technology SY87729LHY is a 3.3V rate-independent fractional-N frequency synthesizer that generates a differential PECL reference from a single input source. The device covers a 10MHz to 365MHz output range and is supplied in a 32-pin TQFP package with an exposed pad. Verified distributor data identifies it as a clock synthesizer and jitter-cleaning device, while the manufacturer datasheet describes support for standards-compliant transport reference generation. A fractional-N synthesizer is a clock and timing IC that synthesizes programmable frequencies from a stable reference. Its hierarchy is fractional-N synthesizer > PLL-based clock generator > clock synthesizer > clock and timing IC > semiconductor. This technology is particularly useful when a system needs a precise communications reference without relying on a separate crystal oscillator for every output frequency. Differential PECL outputs provide complementary signals suited to high-speed digital clocking and optical-transponder systems. The SY87729LHY operates from a 3.3V supply and synthesizes frequencies from 10MHz to 365MHz using a single reference source. The verified search material specifically describes a 27MHz reference input and a maximum output of 365MHz. It generates the correct differential PECL reference required by the Micrel SY87721L combined clock-and-data-recovery and clock-multiplier-unit device, whose associated data rate range extends from 10Mbps to 2.7Gbps. Fractional-N synthesis permits accurate generation of transport-related reference frequencies with or without forward-error correction. This is valuable in systems requiring standards-compliant downstream data units even when the associated upstream interface produces no signal. Exact phase-noise, jitter, reference-input, output-frequency, and divider specifications are not included in the supplied excerpts and must be confirmed in the manufacturer datasheet before final timing-budget approval. Typical uses include optical transponders, SONET-compatible transport equipment, Ethernet-compatible clocking systems, and other communications links driven by the SY87721L. In these applications, the synthesizer establishes the local reference required by the downstream CDR/CMU, while the 365MHz upper output range provides headroom for demanding clock rates. Board-level signal integrity and differential clock routing remain essential because high-speed edge quality is not determined by output frequency alone. Designers should place the input, output, and bypass connections as shown in the manufacturer application guidance, maintain short return paths, and use controlled-impedance routing for differential PECL pairs. The exposed pad should be connected to the ground plane according to the datasheet thermal and layout instructions. Because detailed termination and decoupling values were not supplied here, those values must be taken directly from the SY87729L manufacturer datasheet rather than inferred. This product summary combines verified manufacturer and distributor information, pricing available as of 2026-10-28, same-family replacement information, and practical guidance for evaluating the SY87729LHY. It highlights where verified data is complete and marks unresolved electrical, environmental, pin-level, and lifecycle details rather than presenting unsupported assumptions as specifications.

طلب عرض سعر اتصل بنا
SY87739LHG - 729 MHz Fractional-N Synthesizer | Microchip Technology
SY87739LHG

SY87739LHG - 729 MHz Fractional-N Synthesizer | Microchip Technology

Microchip Technology SY87739LHG is a fractional-N frequency synthesizer designed for high-performance data transport systems, with a maximum output frequency of 729 MHz, PECL inputs and outputs, and a 32-TQFP-EP package measuring 7 x 7 mm. The device is assigned to the application-specific clock and timing category and supports Ethernet, Fibre Channel, SONET/SDH, and ATM clocking applications. A fractional-N frequency synthesizer is a clock-generation IC that uses a phase-locked loop to produce an output frequency derived from a reference clock. Its fractional division capability permits frequency synthesis between integer division ratios, making this device category useful when an exact output frequency is required without changing the external reference. In the system hierarchy, the SY87739LHG is a PLL-based clock synthesizer, a specialized member of clock and timing integrated circuits and a semiconductor. The key documented features are a maximum output frequency of 729 MHz, differential PECL input and output interfaces, a 1:1 input-to-output ratio, and operation from a 3.3 V supply identified in the available product data. The listed frequency range extends from 10 MHz to 729 MHz. Its differential clocking architecture is intended to support high-speed data transport systems where signal integrity and clock quality are important design considerations. The SY87739LHG belongs to Microchip Technology's AnyClock family and uses a fractional-N synthesis architecture. The available product listing identifies the PLL feature and one output circuit. The 32-pin TQFP package with an exposed pad provides a defined surface-mount footprint for equipment requiring high-frequency clock generation in a moderately compact package. Typical applications include Ethernet line cards, Fibre Channel systems, SONET/SDH transport equipment, ATM networks, and other high-performance data transport platforms. In these systems, the synthesizer can establish a required internal operating frequency from a stable reference while supporting high-speed differential clock distribution. Equipment designers should also account for reference quality, loop bandwidth, jitter, supply integrity, and output termination. A key design consideration is that the listed device status is obsolete. Existing equipment can continue to use the documented SY87739LHG configuration, but new designs should not assume current production availability. The 7 x 7 mm exposed-pad package also requires a PCB footprint and thermal design consistent with the manufacturer's package drawing, particularly when the adjacent circuitry or exposed pad is used for heat removal. This page combines the verified distributor and manufacturer-listing information with application guidance, lifecycle context, a specification-gap inventory, and transparent replacement analysis. Because the supplied cross-reference results identify search tools but do not name a verified pin-compatible substitute, it does not present unverified parts as drop-in replacements.

طلب عرض سعر اتصل بنا
SY87739LHI - 729MHz Fractional-N Synthesizer | Microchip
SY87739LHI

SY87739LHI - 729MHz Fractional-N Synthesizer | Microchip

Microchip Technology SY87739LHI is a protocol-transparent, 3.3 V fractional-N frequency synthesizer with one differential PECL output, an output-frequency range of 10 MHz to 729 MHz, and operation from a single 27 MHz reference source. The device is supplied in a 32-pin TQFP with exposed pad package, designated 32-TQFP-EP (7x7) by DigiKey. Its architecture provides rate-independent synthesis for communications equipment requiring exact frequencies associated with Ethernet, Fibre Channel, SONET/SDH, and ATM protocols. A fractional-N synthesizer is a clock-generation IC that derives an output clock from a stable reference while using fractional division to produce frequencies that are not limited to integer ratios of the reference. The SY87739LHI belongs to the broader clock and timing hierarchy: fractional-N frequency synthesizer, clock generator, timing IC, and integrated circuit. This makes it useful where a system requires a programmable or protocol-related clock while retaining the operational simplicity of a single-reference architecture. The primary electrical features include a 10 MHz to 729 MHz synthesis range, a maximum characterized output frequency of 729 MHz, one differential PECL output, and 3.3 V operation. A 27 MHz reference allows the synthesizer to generate exact frequencies used by common transport protocols, with or without forward-error correction. Protocol transparency is important because the generated frequency can follow the required clock relationship rather than being limited to a fixed integer divider ratio. The SY87739L integrates a complete rate-independent frequency-synthesis function in one IC. It is specified for Ethernet, Fibre Channel, SONET/SDH, and ATM clock-generation requirements, making it particularly relevant to optical transponders, line cards, clocking subsystems, and communications test equipment. Its differential PECL interface supports high-speed clock distribution, although board-level implementation still requires correct differential routing, controlled impedance, and power-supply decoupling. Typical uses include SONET/SDH transponder reference generation, Fibre Channel interface clocking, Ethernet equipment clock synthesis, ATM networking hardware, optical transport modules, and laboratory communication test systems. Designers should confirm that the selected output frequency, reference configuration, PECL termination, and thermal conditions match the exact datasheet operating requirements before releasing production hardware. PCB implementation requires careful treatment of the exposed pad and high-speed clock nets. The exposed pad should be connected to the ground plane through the manufacturer-recommended thermal-via pattern, while input, output, and supply connections should be kept short. PECL output biasing and any downstream termination must follow the reference circuit because incorrect termination can alter edge quality, current consumption, and clock amplitude. This product record combines the verified manufacturer and distributor data with practical selection criteria for protocol timing, package-aware alternatives, and implementation considerations. It highlights where verified electrical data is available and marks undisclosed electrical, lifecycle, pricing, and pin-level information explicitly rather than inferring values that are not supported by the supplied sources.

طلب عرض سعر اتصل بنا
SY87739LHY - 729MHz Fractional-N Synthesizer | Microchip
SY87739LHY

SY87739LHY - 729MHz Fractional-N Synthesizer | Microchip

The Microchip Technology SY87739LHY is a protocol-transparent fractional-N clock synthesizer that generates differential PECL output frequencies from 10MHz to 729MHz using a single 27MHz reference oscillator. The device is packaged in a 32-pin TQFP with exposed pad, providing one clock output and dedicated support for high-speed communication protocols. A fractional-N synthesizer is a phase-locked-loop timing device that derives an output frequency from a stable reference clock using programmable division ratios. The SY87739LHY belongs to the fractional-N synthesizer hierarchy, PLL-based clock generator family, and broader clock and timing IC category. Its protocol-transparent architecture allows a system to synthesize common data-transport reference rates without using a separate dedicated clock generator for every standard. The primary features include operation from a 3.3V supply, a 27MHz reference input, and output coverage extending to 729MHz. Two tandem PLL circuits provide the frequency synthesis functions: a modified fractional-N stage produces rational-ratio frequencies, while a second integer-ratio stage can adjust the resulting output. Differential PECL outputs are suited to high-speed optical, serial, and telecommunications systems requiring a low-noise clock reference. The device can generate exact reference frequencies used by common transport protocols, including configurations with or without forward error correction. The first PLL supports protocol rates except those containing FEC or digital-wrapper overhead, while the second PLL provides an additional output adjustment stage. This architecture offers design flexibility while preserving a single-reference-clock implementation, reducing the number of separate oscillator and divider chains required in a communication line card. Typical applications include Ethernet and Fibre Channel line interfaces, SONET/SDH/ATM transponders, optical communication modules, network timing subsystems, and high-speed serial backplanes. The 729MHz upper limit supports demanding serial links, while the 10MHz lower limit permits synthesis of lower-rate references for adjacent digital circuitry. PCB implementation should preserve short, impedance-controlled routes for the differential PECL clock outputs and provide a continuous ground reference beneath the exposed pad. Input and output return paths should avoid shared-current coupling with switching supplies. Decoupling capacitors should be placed directly across the device supply pins according to the manufacturer layout guidance, while the exposed pad requires thermal vias and adequate copper area. This page combines the manufacturer description with package, protocol, frequency, and sourcing details while separating engineering guidance from basic catalog data. It also identifies the verified pin-compatible family options and the unresolved qualification details that should be confirmed before production substitution.

طلب عرض سعر اتصل بنا
SY87813LHG - 3.3V Any-Rate 1.3Gbps CDR | Microchip
SY87813LHG

SY87813LHG - 3.3V Any-Rate 1.3Gbps CDR | Microchip

The Microchip SY87813LHG is a 3.3V any-rate clock and data recovery integrated circuit designed for NRZ data rates from 28Mbps to 1.3Gbps. It combines clock recovery and data retiming in a 32-pin TQFP package with an exposed pad. The device is identified by the Microchip Technology clock and timing product category and is listed as lead-free. A clock and data recovery IC, commonly called a CDR, is a timing integrated circuit that extracts or reconstructs a usable clock from a serial data stream and aligns the data for downstream processing. The CDR belongs to the broader clock and timing hierarchy, which includes clock buffers, clock generators, phase-locked loops, multipliers, and data-retiming devices. These circuits support the reliable transfer of high-speed information through serial communication, storage, networking, and test systems. The SY87813LHG supports an unusually broad 28Mbps-to-1.3Gbps operating range in a single device. Its any-rate architecture makes it useful when one board design must accommodate several serial link rates. The 3.3V supply requirement also simplifies power planning for conventional 3.3V digital systems. NRZ signaling compatibility is central to the device's ability to recover timing and retime data in high-speed serial paths. Technically, the SY87813LHG performs two related functions. Clock recovery separates timing information from the incoming data stream so that a stable clock can be reconstructed, while data retiming aligns the serial data with that recovered clock. This division of responsibility helps reduce accumulated timing uncertainty between transmitter and receiver. The combination is particularly valuable in links where source and destination circuits cannot share a sufficiently stable common clock. Typical applications include telecom and wireless communication equipment, SDH-based transport systems, network-interface equipment, optical-module electronics, and high-speed backplanes. A 1.3Gbps-capable CDR can also be evaluated for test and measurement systems, industrial control links, and embedded equipment that must recover clocking from received serial data. The exact interface standard and board-level signal integrity still require validation in the final system. A critical design consideration is that high-speed clock recovery depends on input signal quality as well as device capability. The data and clock inputs must be routed with controlled impedance, short return paths, and minimal discontinuity. Power and ground distribution must remain quiet because reference jitter and supply disturbance can affect recovery margin, especially when the installed link approaches the upper end of the supported range. This product page combines the identified electrical characteristics, package information, sourcing structure, and application guidance to help engineers evaluate the SY87813LHG for NRZ serial links. It also distinguishes verified component facts from design parameters that must be confirmed against the complete manufacturer datasheet and the specific channel implementation before layout release or production use.

طلب عرض سعر اتصل بنا
SY88073LMG - 12.5G Limiting Postamplifier | Microchip
SY88073LMG

SY88073LMG - 12.5G Limiting Postamplifier | Microchip

The Microchip SY88073LMG is a 1 Gbps to 12.5 Gbps limiting postamplifier IC designed for fiber-optic receiver signal conditioning, with a programmable decision threshold and a 16-VFQFN exposed-pad package measuring 3 mm by 3 mm. It accepts a supply voltage from 3 V to 3.6 V and is specified for an ambient operating range of -40 °C to +85 °C. The device combines high-bandwidth signal amplification with amplitude limiting, making it appropriate for recovering and conditioning high-speed data before downstream digital circuitry. A limiting postamplifier is a special-purpose high-speed analog IC placed in the receive path of optical communications equipment. It increases the amplitude of small input signals and applies a controlled threshold to reject noise, interference, and other unwanted excursions. In the broader component hierarchy, it belongs to the amplifier family, specifically special-purpose limiting amplifiers used in fiber-optic transceivers and other high-speed serial links. Key characteristics include an operating data rate of 1 Gbps to 12.5 Gbps, a 3 V to 3.6 V supply range, and support for Ethernet receiver applications. The exposed thermal pad in the 16-VFQFN package provides a direct heat-dissipation path beneath the device. RoHS compliance is identified for the comparable 16-VFQFN product family. The exact gain, input sensitivity, threshold-control range, jitter, bandwidth, and current-consumption figures should be confirmed from the manufacturer datasheet before a production design is released. The architecture is tailored to continuous-mode, multi-rate optical receiver designs. Signal conditioning before clock recovery or decision circuitry can improve usable signal amplitude while limiting the effects of noise. The programmable decision threshold allows receiver tuning across different optical links, although board-level performance also depends on input coupling, reference voltage generation, source impedance, trace geometry, and the bandwidth requirements of the following circuitry. Typical applications include 1G and 10G Ethernet optical transceivers, limiting amplifiers for PON equipment, high-speed optical receiver modules, and other serial links operating through 12.5 Gbps. The compact 3 mm by 3 mm footprint supports dense optical-module layouts, although its exposed pad requires deliberate PCB thermal design. Differential routing, short return paths, controlled impedance, and careful power-supply decoupling are particularly important at these data rates. When laying out the PCB, use the manufacturer pin-description table and recommended land pattern rather than relying on package dimensions alone. Connect the exposed pad to the intended ground plane according to the datasheet, minimize supply-loop inductance, and place bypass capacitance close to the supply pins. Preserve symmetry between complementary signal paths and avoid adding unnecessary stubs or test-point discontinuities that could degrade high-frequency behavior. This page combines the device identity, package information, operating limits, verified listing references, same-package alternatives, and application-focused design guidance for engineers evaluating the SY88073LMG. Before schematic release, verify the exact threshold-control method, signal polarity, decoupling values, layout stack-up, and absolute maximum ratings against the current Microchip manufacturer documentation.

طلب عرض سعر اتصل بنا
SY88083LMG - 12.5Gbps Limiting Post Amplifier | Microchip
SY88083LMG

SY88083LMG - 12.5Gbps Limiting Post Amplifier | Microchip

The Microchip Technology SY88083LMG is a limiting postamplifier integrated circuit for continuous-mode, multi-rate fiber-optic receivers operating from 1 Gbps to 12.5 Gbps. The device provides a high-bandwidth, high-sensitivity input stage, programmable wide-range signal-detect and loss-of-signal assertion thresholds, approximately 4 dB of electrical hysteresis, and selectable open-collector or TTL-compatible status outputs. It is packaged in a 16-QFN package measuring 3 mm by 3 mm. A limiting postamplifier is a decision-threshold amplifier used at the output of an optical receiver. It converts a high-speed current-mode signal from a photodiode or transimpedance amplifier into a clean, logic-compatible digital output. By placing a programmable decision threshold directly in the signal path, this device class separates valid data from noise and supports automatic adaptation to optical power, temperature, aging, and component-tolerance variations. The SY88083LMG supports multi-rate system designs without changing the receiver front end. Its programmable reference voltage allows the threshold to be adjusted for system reach, while approximately 4 dB of hysteresis reduces chattering in the loss-of-signal and signal-detect indications. The status-control pin selects open-collector or TTL-compatible operation, and an external pull-up resistor of 5 kΩ to 10 kΩ is recommended for open-collector status outputs. The device also provides input-fault detection and digital interface control, making it suitable for continuous monitoring of optical receivers, PON equipment, data-center links, and industrial optical transceivers. Its limiting architecture produces a digital decision rather than serving as a linear analog gain stage. The 3 mm by 3 mm 16-QFN package minimizes board area, but high-speed routing and short return paths are essential. Place the device close to the receive-side signal chain, provide a low-inductance ground connection, and observe the manufacturer’s differential impedance and decoupling recommendations. Keep the status pull-ups electrically quiet so switching activity does not couple into the sensitive input stage. This page consolidates the manufacturer’s receiver application data, distributor availability information, device-family comparisons, and practical design guidance. It also identifies candidate same-package devices for engineering evaluation while clearly separating confirmed functions from parameters that must be confirmed against the latest manufacturer documentation before layout release.

طلب عرض سعر اتصل بنا