المنتجات (44,000+)

XMC4500-F144F1024AB - 120MHz Cortex-M4 MCU | Infineon
XMC4500-F144F1024AB

XMC4500-F144F1024AB - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500-F144F1024AB is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at 120 MHz with 1 MB of flash memory and 160 kByte of SRAM. The device is packaged in a 144-pin PG-LQFP-18 industrial package and is intended for connected industrial control, industrial Ethernet, power conversion, and sense-and-control systems. Its combination of Ethernet connectivity, configurable peripherals, and deterministic microcontroller processing supports compact embedded platforms that need communications and control in one device. An ARM Cortex-M4 microcontroller is a reduced-instruction-set processor-based embedded controller used for real-time control, communications, and signal-processing tasks. The XMC4000 family combines a standard ARM processor core with Infineon peripherals for industrial connectivity, control, and power-management designs. This makes the XMC4500 suitable when a system needs more than a basic GPIO controller, especially where Ethernet and deterministic control must share one microcontroller platform. The verified product information identifies a 120 MHz operating frequency, 1 MB flash, 160 kByte SRAM, Ethernet connectivity, and a 144-pin PG-LQFP-18 package. The family description also identifies configurable peripherals, allowing application-specific tailoring. The 1 MB flash provides room for networking stacks, control software, diagnostics, and application logic, while the 160 kByte SRAM supports working memory for protocol and control tasks. The XMC4500 is positioned for industrial communication and control applications where an Ethernet-capable MCU can reduce component count by integrating network communication with local control. The Cortex-M4 architecture provides a familiar embedded software ecosystem, while the family peripheral set is designed for industrial connectivity, power conversion, and sense-and-control use cases. Exact electrical limits, pin functions, timing values, and temperature limits require the Infineon XMC4500 datasheet. Typical applications include industrial Ethernet gateways, programmable automation controllers, motor and power-conversion control, industrial sensor nodes, and connected measurement equipment. For designs requiring deterministic response, the MCU can process local control loops while Ethernet handles supervisory communication, diagnostics, and configuration. The verified data does not provide a complete application-specific peripheral map for this exact orderable MPN, so firmware engineers should verify pin multiplexing and peripheral availability in the manufacturer datasheet before schematic capture. A key design consideration is package and firmware verification. The target is a 144-pin industrial package, so PCB land patterns, exposed-pad or thermal requirements, pin multiplexing, clock configuration, and power sequencing must be checked against the exact datasheet. This page synthesizes the verified manufacturer and distributor information, available cross-reference results, package identity, application context, and engineering guidance; missing orderable-specific data is explicitly marked rather than estimated. The Infineon XMC4500-F144F1024AB is a 120 MHz ARM Cortex-M4 industrial microcontroller with Ethernet, 1 MB flash, 160 kByte SRAM, and a 144-pin PG-LQFP-18 package.

طلب عرض سعر اتصل بنا
XMC4500-F144K1024 - 120MHz Cortex-M4 1MB Flash MCU | Infineon
XMC4500-F144K1024

XMC4500-F144K1024 - 120MHz Cortex-M4 1MB Flash MCU | Infineon

The Infineon XMC4500-F144K1024 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 series, combining a 120 MHz processor core with 1024 kByte of embedded flash and 160 kByte of SRAM in a 144-pin PG-LQFP package. Industrial connectivity microcontrollers such as the XMC4500 sit between general-purpose embedded processors and highly specialized control devices. They combine an Arm Cortex-M4 instruction set with configurable peripherals for communications, timing, analog conversion, and industrial control, allowing one controller to supervise power conversion, sensing, fieldbus communication, and safety-related monitoring functions. The XMC4500 integrates Ethernet connectivity alongside the XMC4000 peripheral family, and its 1024 kByte of flash supports larger protocol stacks, application firmware, and field-upgrade capability than smaller 32-bit microcontrollers. The 160 kByte of SRAM provides working memory for packet buffers, control loops, and communication tasks. The 144-pin PG-LQFP-18 package provides a substantial peripheral count and power-management connectivity for industrial control boards. According to the manufacturer datasheet, the XMC4500 series targets industrial connectivity, industrial control, power conversion, and sense-and-control systems. Its configurable peripheral set allows designers to tailor the controller to application requirements instead of relying on a fixed combination of unused functions. The 120 MHz Cortex-M4 core and integrated Ethernet interface make the device suitable for connected motor controllers, power-conversion equipment, and industrial automation gateways. Designers should pay attention to the exact ordering suffix, flash density, package type, and temperature-grade requirements when comparing XMC4500 variants. The verified distributor listings identify the related -AC, -AB, and -AA order codes, while the manufacturer documentation provides the authoritative electrical and ordering details. For the target suffix, confirm the package pin count, exposed-pad connections, and production availability before layout release. This page consolidates manufacturer datasheet links, distributor records, package information, and practical selection guidance for the XMC4500-F144K1024. It highlights where related XMC4500 order codes are useful references and where a PCB redesign is required, helping engineers evaluate drop-in replacement risk before committing a new design.

طلب عرض سعر اتصل بنا
XMC4500E144F1024ACXQSA1 120MHz Cortex-M4 1MB MCU
XMC4500E144F1024ACXQSA1

XMC4500E144F1024ACXQSA1 120MHz Cortex-M4 1MB MCU

Infineon Technologies XMC4500E144F1024ACXQSA1 is an industrial ARM Cortex-M4 microcontroller with a 120 MHz CPU, 1 MB of flash memory, and 160 KB of SRAM in a 144-pin LFBGA-144-10 package. The device belongs to the XMC4000 family and is designed for embedded industrial applications requiring real-time control, Ethernet connectivity, and a broad peripheral set. It operates from a 3.3 V supply according to distributor and manufacturer product information, with an industrial temperature rating of -40 °C to +85 °C. The XMC4500 combines an ARM Cortex-M4 processor core with Infineon’s configurable peripheral set. This architecture places a general-purpose microcontroller, memory, communication interfaces, timing resources, and analog or digital peripherals into one device. The 120 MHz execution rate supports demanding control loops and connected industrial equipment, while the 1 MB program-memory capacity allows more application code, configuration data, and protocol stacks to be stored locally. Key characteristics include 32-bit ARM Cortex-M4 operation at 120 MHz, 1 MB of flash, 160 KB of SRAM, an Ethernet MAC, and a 144-pin LFBGA-144-10 package. The large pin count provides access to the family’s communication, general-purpose I/O, analog, and timing functions. The industrial temperature range makes the device suitable for factory equipment, embedded controllers, communication modules, and connected automation systems. The device is identified by the Infineon ordering code XMC4500E144F1024ACXQSA1. The XMC4500-E144X1024-AC manufacturer product designation identifies the underlying industrial MCU configuration, while the full ordering suffix identifies the package, temperature, and shipment variant. This distinction matters when comparing distributor records because some listings abbreviate or omit the complete orderable suffix. XMC4500 controllers are intended for applications where deterministic embedded control and industrial communications are more important than minimizing pin count or package area. The Ethernet MAC enables network-connected equipment, while the Cortex-M4 core supports control software, communication stacks, and supervisory functions. A 144-pin LFBGA also requires careful PCB layout with adequate escape routing, power distribution, and thermal design. For new designs, use the manufacturer datasheet and product-page ordering information to confirm the exact pin assignment, supported peripherals, electrical limits, and package dimensions. The XMC4500E144F1024ACXQSA1 is a tray-packaged industrial MCU; procurement, stock, and lead-time questions should be directed through the XAIPART Request a Quote form. Engineering decisions should also account for the 3.3 V supply requirement, the 120 MHz operating point, the 144-ball land pattern, and the -40 °C to +85 °C environmental range.

طلب عرض سعر اتصل بنا
XMC4500E144X1024ACXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500E144X1024ACXQSA1

XMC4500E144X1024ACXQSA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4500E144X1024ACXQSA1 is a 32-bit Arm Cortex-M4 microcontroller rated at 120 MHz, with 1024 kByte of flash memory and an Ethernet MAC, in a 144-pin PG-LFBGA-144-10 package. The device belongs to the XMC4000 family and targets industrial embedded systems requiring high-performance control, communications, and configurable peripheral support. An Arm Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded control. Positioned within the hierarchy of microcontroller, embedded processor, and semiconductor, it combines deterministic real-time execution with integrated memory, communications peripherals, and general-purpose I/O. The XMC4000 architecture is intended to provide a configurable peripheral set so equipment designers can tailor the device to application-specific industrial requirements. The principal features of the XMC4500E144X1024ACXQSA1 include a 120 MHz Cortex-M4 core, 1024 kByte of flash, an integrated Ethernet MAC, and a 144-pin LFBGA package. Its 1 MByte flash capacity provides substantial room for application code, configuration data, and protocol stacks. The Ethernet MAC supports designs requiring wired network connectivity without relying on an external network controller. The XMC4500 combines an industry-standard 32-bit Arm Cortex-M4 core with Infineon industrial peripherals. Its 120 MHz operating frequency supports responsive control loops and communication-intensive firmware. The family-level documentation describes a superset architecture, while the device-specific ordering information identifies the exact flash density, package, and qualification options. All grounds share a common ground potential, and the exposed die pad in applicable packages must connect to that common ground. Typical applications include industrial Ethernet equipment, factory automation controllers, programmable logic controllers, motor and motion-control systems, industrial communications gateways, and embedded data-acquisition equipment. The combination of 120 MHz processing performance, 1 MByte flash, and Ethernet MAC is particularly suitable for controllers that must execute control software and network protocols concurrently. For PCB implementation, follow the Infineon PG-LFBGA-144-10 package documentation for land patterns, ball assignments, routing, and exposed-pad connection. Pay particular attention to the common-ground requirement, high-speed Ethernet signal integrity, decoupling placement, and thermal management around the 144-ball land grid. Confirm the complete pin and ball assignments against the manufacturer package drawing before fabrication. This product overview combines the manufacturer ordering information, package identification, core and memory characteristics, and industrial application context into a design-oriented reference. It also identifies close same-family ordering options for engineers evaluating flash density and grade changes without overlooking the need to verify package-level compatibility.

طلب عرض سعر اتصل بنا
XMC4500F100F1024AC - 120MHz Cortex-M4 MCU 1024KB | Infineon
XMC4500F100F1024AC

XMC4500F100F1024AC - 120MHz Cortex-M4 MCU 1024KB | Infineon

The Infineon XMC4500F100F1024AC is a 32-bit industrial microcontroller from the XMC4000 family, integrating an ARM Cortex-M4 core with FPU running at 120 MHz, 1024 KB of embedded Flash, and 160 KB of RAM in a 100-pin LQFP package. It is engineered for energy-efficient industrial applications including digital power conversion, motor control, and industrial connectivity. An ARM Cortex-M4 microcontroller is a 32-bit processor core that combines high-performance digital signal processing (DSP) instructions with a single-precision floating-point unit (FPU), commonly deployed in industrial automation, motor control, and power-conversion systems. The XMC4000 family extends this core with Infineon's proprietary peripheral set, bridging the CPU to power-management compute, motor-control compute, and connectivity ICs in the broader industrial semiconductor taxonomy. Key features include a Cortex-M4 core with DSP/FPU at 120 MHz, 1024 KB Flash program memory, 160 KB SRAM, an integrated Ethernet MAC, USB 2.0 FS, six CAN nodes, six USIC channels configurable as UART/SPI/I2C, two 12-bit ADC units with up to 26 channels, a CCU6 timer unit for motor PWM, and a flexible peripheral interconnect (HRPWM). The LQFP-100 package is surface-mountable with standard 0.5 mm pitch. The XMC4500 architecture pairs the Cortex-M4 core with a multi-layer bus matrix and dedicated peripheral DMA channels, enabling deterministic real-time response for power-conversion and motor-control loops. Embedded Flash supports in-application programming, and the on-board temperature sensor and supply-voltage monitor enable functional-safety-aware firmware designs. Typical applications include industrial servo drives, solar inverters, switched-mode power supplies with digital control loops, field-oriented motor control (FOC), industrial PLC I/O modules, and EtherCAT/CANopen slave controllers. The combination of Cortex-M4 DSP capability and dedicated CCU6 PWM timers makes XMC4500 particularly well-suited to digital power conversion and three-phase motor control. When designing with this part, allocate adequate decoupling (100 nF + 4.7 µF per VDD/VSS pair) and ensure that the 25 MHz crystal oscillator or external clock source meets the data sheet jitter specification. The 1024 KB Flash is split into two banks, allowing concurrent read/execute and in-field firmware updates via the built-in bootstrap loader. This page consolidates Infineon datasheet specifications, distributor pricing and stock, drop-in compatible variants within the XMC4500 series, and practical design notes that are not aggregated in the standalone datasheet.

طلب عرض سعر اتصل بنا
XMC4500F100F1024ACXQMA1 - 120MHz Cortex-M4 | Infineon
XMC4500F100F1024ACXQMA1

XMC4500F100F1024ACXQMA1 - 120MHz Cortex-M4 | Infineon

Infineon Technologies XMC4500F100F1024ACXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 1 MB of flash memory and integrated Ethernet connectivity, housed in a 100-pin PG-LQFP-11 package. The device combines a high-performance Cortex-M4 processor core with a configurable peripheral set for industrial automation, networking, and embedded control systems. A microcontroller is a semiconductor system that integrates a processor core, program memory, data memory, and peripherals such as timers, communications interfaces, and analog blocks. The XMC4500 belongs to the Arm Cortex-M4 microcontroller family and the Infineon XMC4000 industrial microcontroller series. Its position in the embedded hierarchy is processor core to microcontroller to embedded control platform, combining deterministic real-time control with Ethernet-connected industrial equipment. The principal device characteristics include a 120 MHz operating frequency, 1 MB of flash storage, 32-bit processing, and a 3.3 V supply indicated by the ordering designation. The configurable peripheral architecture allows designers to tailor timer, communication, and interface resources around an industrial application. The 100-pin LQFP package provides a conventional surface-mount option with exposed-pad construction for improved thermal performance. Technical operation centers on the Arm Cortex-M4 processor core, which uses the ARM instruction set and supports efficient interrupt-driven control. Integrated Ethernet supports network-connected industrial equipment, while the extensive peripheral set reduces the need for external interface devices. The manufacturer describes the XMC4500 as an energy-efficient industrial platform combining leading peripheral capabilities with the Cortex-M4 core. Typical uses include industrial Ethernet controllers, programmable logic controllers, factory automation nodes, building automation interfaces, and embedded robotics. In each case, the 120 MHz processing rate supports responsive control logic, 1 MB of flash accommodates embedded firmware, and Ethernet allows status reporting or distributed control over an industrial network. PCB design should follow the manufacturer pin-definition table and recommended decoupling guidance for the 100-pin exposed-pad LQFP. The exposed thermal pad requires a solder-flooded PCB land and adequate thermal-via distribution to transfer heat into the board structure. Firmware configuration should also follow the ordering-information matrix because XMC4500 derivatives differ in available peripherals and temperature options. This product page consolidates the exact ordering designation, manufacturer specifications, package information, practical PCB guidance, and verified drop-in ordering-code alternatives. It also distinguishes configurable industrial features that are shared across the XMC4500 family from the specific package and ordering code of XMC4500F100F1024ACXQMA1.

طلب عرض سعر اتصل بنا
XMC4500F100F768ACXQMA - 120MHz Cortex-M4 MCU | Infineon
XMC4500F100F768ACXQMA

XMC4500F100F768ACXQMA - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500F100F768ACXQMA is a 32-bit industrial ARM Cortex-M4 microcontroller operating at 120 MHz, with 768 kByte of embedded Flash and an Ethernet MAC, supplied in a 100-pin LQFP package with an exposed pad. The device is identified in distributor data as the 3.3 V, 100-pin LQFP version of Infineon's XMC4000 family and is intended for energy-efficient industrial applications. An industrial microcontroller is a semiconductor integrated circuit that combines a processor core, embedded nonvolatile memory, communication peripherals, timers, and I/O interfaces on one device. The XMC4500 belongs to the XMC4000 family and uses the ARM Cortex-M4 architecture, placing it in the hierarchy of 32-bit MCU, microcontroller, embedded processor, and semiconductor. Its configurable peripheral set allows an industrial control design to combine real-time processing with Ethernet-connected equipment. The verified device data identifies three principal performance points: a 120 MHz Cortex-M4 core, 768 kByte of Flash, and integrated Ethernet MAC support. The Cortex-M4 platform supports efficient control-oriented software, while the larger Flash capacity accommodates networking stacks, control algorithms, diagnostics, and application firmware. The Ethernet MAC makes the MCU suitable for connected industrial systems without requiring a separate network controller solely for Ethernet interface management. Infineon describes the XMC4500 as combining a leading-edge peripheral set with the industry-standard ARM Cortex-M4 core. This combination targets energy-efficient industrial equipment where deterministic embedded control, communications, and configurable peripherals must coexist in one package. Distributor records further identify the target as the industrial XMC4000 MCU in a PG-LQFP-100-11 configuration. Typical uses include industrial Ethernet controllers, connected factory equipment, industrial automation modules, embedded network bridges, and real-time supervisory controllers. In these systems, the 120 MHz processor can service communications and control tasks, while the 768 kByte Flash provides room for protocol stacks and firmware. The Ethernet MAC is especially relevant to machinery monitoring, networked sensors, and supervisory control equipment. Designers should verify the complete pin assignment, exposed-pad connection, decoupling requirements, clock configuration, and startup sequence against the Infineon XMC4500 datasheet before layout release. The verified snippets do not enumerate all 100 pin names, so this page does not infer individual pin functions. Board design should preserve the manufacturer's recommended land pattern and exposed-pad implementation rather than treating the package as a generic LQFP. This page combines verified manufacturer and distributor facts, same-family drop-in candidates, price information available on 2026-10-30, and practical qualification guidance. It also distinguishes confirmed specifications from data that must be obtained from the full manufacturer datasheet, helping engineers evaluate the XMC4500F100F768ACXQMA without relying on incomplete catalog descriptions.

طلب عرض سعر اتصل بنا
XMC4500F100F768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500F100F768ACXQMA1

XMC4500F100F768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500F100F768ACXQMA1 is a 32-bit industrial ARM Cortex-M4 microcontroller operating up to 120 MHz, with 768 kB of embedded flash memory, 160 kB of RAM, and integrated Ethernet MAC, CAN, and LIN interfaces. It is supplied in a 100-pin PG-LQFP-11 package for industrial embedded control applications. A microcontroller is a programmable system-on-chip that combines a processor core, memory, and dedicated peripherals in one integrated device. The ARM Cortex-M4 core provides efficient real-time instruction execution, while the XMC4500 family adds configurable peripherals for industrial communications and mixed-signal control. This XMC4500 variant combines Ethernet MAC connectivity with CAN and LIN networking, making it suitable for connected industrial equipment. Key device characteristics include a maximum clock frequency of 120 MHz, 768 kB of flash for firmware storage, 160 kB of SRAM for working data, and operation from a 3.3 V supply. The ordering code XMC4500F100F768ACXQMA1 identifies the 768 kB flash configuration in the LQFP-100 industrial package. The Infineon product page identifies the base XMC4500-F100F768-AC ordering designation as an industrial ARM Cortex-M4 device with Ethernet MAC. The XMC architecture provides a configurable peripheral set that allows engineers to tailor analog, timing, communications, and digital control resources to the target application. Ethernet MAC support supports network-connected industrial nodes, while CAN and LIN interfaces enable connection to fieldbus and automotive-style vehicle networks. At 120 MHz, the Cortex-M4 core also provides sufficient performance for real-time control loops, data acquisition, and protocol handling. Typical uses include industrial Ethernet controllers, motor and power conversion systems, factory automation equipment, CAN and LIN network nodes, and industrial sensors that require substantial local memory. The 768 kB flash capacity reduces the need for external program memory in firmware-intensive control systems, while 160 kB of RAM supports buffering and communication stacks. When laying out the board, route the exposed-pad and ground connections according to the manufacturer land-pattern and thermal guidance in the XMC4500 datasheet. Confirm the power-supply design against the 3.13 V to 3.63 V operating range listed for this ordering code, and verify every pin function and alternate-function assignment against the package-specific pin table before routing. This page combines manufacturer and distributor product information with practical configuration guidance, package details, sourcing information, and design considerations. The comparison and selection notes help engineers evaluate the exact XMC4500 ordering code against other Infineon XMC industrial microcontroller options while avoiding assumptions about unverified pin compatibility.

طلب عرض سعر اتصل بنا
XMC4500F100K1024AAXQSA1 - 120MHz Cortex-M4 | Infineon
XMC4500F100K1024AAXQSA1

XMC4500F100K1024AAXQSA1 - 120MHz Cortex-M4 | Infineon

The Infineon Technologies XMC4500F100K1024AAXQSA1 is a 32-bit ARM Cortex-M4 industrial microcontroller operating at 120 MHz, with 1024 kByte of flash memory and integrated Ethernet connectivity, in a 100-pin PG-LQFP package. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The XMC4500 belongs to the XMC4000 family of 32-bit ARM microcontrollers. Its hierarchy is ARM Cortex-M4 microcontroller, embedded processor, and programmable control IC. The XMC4000 family combines the ARM Cortex-M4 core with a configurable peripheral set intended to support application-specific industrial control systems. Three headline specifications define the XMC4500F100K1024AAXQSA1: a 120 MHz Cortex-M4 core, 1024 kByte of flash memory, and Ethernet connectivity. The flash is organized as 1 MB, or 1M by 8 bits, according to distributor product listings. These characteristics make the device suitable for industrial embedded systems that require deterministic control processing, substantial local program storage, and network communication. The part belongs to the XMC4500-F100x1024 device group, whose manufacturer datasheet covers ordering designations, electrical characteristics, physical characteristics, and supported peripheral functions. The manufacturer describes the XMC4000 platform as combining an ARM Cortex-M4 core with a configurable peripheral set. That architecture allows designers to tailor the controller around particular measurement, communication, and industrial-control requirements rather than relying on a fixed peripheral arrangement. Typical uses include industrial Ethernet equipment, factory automation controllers, connected sensor hubs, building automation equipment, and industrial data-acquisition systems. The Ethernet interface supports connected control architectures, while the 120 MHz Cortex-M4 processing capability is suited to real-time supervisory and control tasks. The 1024 kByte flash also provides practical space for application firmware, configuration data, and field-upgrade handling within a single embedded device. The 100-pin LQFP package provides a substantial pin count for mixed-signal and peripheral-heavy industrial designs. Board layout should preserve the pin-oriented package geometry and route sensitive analog or communications signals away from high-current switching paths. Firmware selection and peripheral configuration should be validated against the exact ordering code and pin multiplexing table in the manufacturer datasheet before production release. This page combines the exact ordering information, package details, memory configuration, processor capability, and Ethernet feature with application guidance, engineering considerations, and a focused drop-in comparison. It is intended to help engineers determine whether the XMC4500F100K1024AAXQSA1 fits an industrial embedded design before beginning PCB implementation.

طلب عرض سعر اتصل بنا
XMC4500F100K1024ACXQSA1 - ARM Cortex-M4 MCU, 120MHz, 1MB Flash | Infineon
XMC4500F100K1024ACXQSA1

XMC4500F100K1024ACXQSA1 - ARM Cortex-M4 MCU, 120MHz, 1MB Flash | Infineon

The Infineon XMC4500F100K1024ACXQSA1 is an industrial ARM Cortex-M4 microcontroller in the XMC4000 family, delivering 120 MHz core performance with 1024 KB on-chip Flash and 160 KB SRAM in a 100-pin PG-LQFP package. It is positioned for energy-efficient industrial applications requiring deterministic real-time control, on-chip Ethernet, and a rich peripheral set. What is an ARM Cortex-M4 microcontroller? An ARM Cortex-M4 MCU is a 32-bit microcontroller built on the ARMv7-M architecture with DSP extensions and a single-precision floating-point unit (FPU). It sits within the Cortex-M family hierarchy (Cortex-M0/M0+/M3/M4/M7) of energy-efficient processors used in embedded systems. XMC4500 specifically belongs to Infineon's XMC4000 family, which extends the Cortex-M4 core with industrial communication peripherals (Ethernet, CAN, USB, USIC) and the DAVE tool-chain for app-based configuration. Key differentiating features of the XMC4500 include: ARM Cortex-M4 core with FPU at 120 MHz; 1024 KB embedded Flash and 160 KB SRAM; on-chip 10/100 Mbps Ethernet MAC for industrial networking; multiple CAN nodes and USB 2.0 Full-Speed OTG; six 4-channel USIC (Universal Serial Interface Channel) modules configurable as UART, SPI, I2C, I2S, or LIN; 12-bit ADC, up to four CCU6 timer units for motor/PWM control; and an operating voltage range of 3.0 V to 3.6 V with -40 °C to +85 °C industrial temperature support. Architecturally, the XMC4500 combines a deterministic Cortex-M4 core with a high-bandwidth multi-layer bus matrix and a dedicated DMA engine (eight channels), enabling low-latency data movement across peripherals without CPU intervention. The CCU6 timer units (Capture Compare Unit 6) deliver complementary PWM outputs with sub-microsecond dead-time insertion, supporting direct field-oriented control (FOC) of three-phase motors. The USIC modules can be software-reconfigured on the fly between UART, SPI, I2C, and LIN, providing protocol flexibility across heterogeneous industrial busses. Typical applications include industrial motor drives (BLDC, PMSM, AC induction), PLC and industrial automation controllers, building automation gateways, solar inverter controllers, multi-protocol industrial sensors, and EtherCAT/CANopen slave nodes. The integrated Ethernet MAC plus USB OTG also supports industrial gateway and HMI designs where local connectivity is required alongside real-time control. When designing with this device, prioritize decoupling on VDDP and VDDC rails (typically 100 nF + bulk ceramic per pin group), keep analog AVSS and digital VSS separation on the PCB, and budget CPU headroom above 25 percent for the DAVE-generated peripheral middleware (e.g., TCP/IP stack, EtherCAT slave library). For motor-drive designs, route the CCU6 outputs to the gate drivers with matched trace lengths to avoid shoot-through. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in any single source, including specific parameter comparisons against other XMC4500 family members (XMC4502, XMC4504, XMC4400) and competitor Cortex-M4 MCUs.

طلب عرض سعر اتصل بنا
XMC4500F100K1024ACXUMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500F100K1024ACXUMA1

XMC4500F100K1024ACXUMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500F100K1024ACXUMA1 is a 32-bit industrial Arm Cortex-M4 microcontroller with a 120 MHz clock, 1 MB of embedded Flash, integrated Ethernet connectivity, and a 100-pin PG-LQFP package with exposed pad. It belongs to the XMC4000 family and combines deterministic microcontroller performance with industrial communications and embedded networking capabilities. A microcontroller is a semiconductor device that integrates a processor core, memory, programmable peripherals, and communication interfaces onto one package. The Cortex-M4 processor belongs to the Arm embedded processor family and executes instructions from tightly controlled memory while supervising timers, serial interfaces, analog peripherals, Ethernet, and external interrupt sources. Within the system hierarchy, this device is a microcontroller, embedded processor, programmable controller, and power-management-aware semiconductor. The XMC4500F100K1024ACXUMA1 provides 1 MB of Flash memory, a 120 MHz maximum CPU frequency, and 32-bit processing in an industrial-oriented package. Its Ethernet support makes the device suitable for connected equipment that must exchange data over a wired network. The exposed pad beneath the PG-LQFP-100-11 package provides a direct thermal path from the die to the PCB, allowing heat to be removed through copper and, where necessary, an external heat spreader. The Arm Cortex-M4 architecture is designed for efficient embedded control and signal-processing workloads. Its exception model supports deterministic interrupt handling, while integrated peripherals reduce the need for discrete interface components. The Ethernet subsystem adds a network interface without requiring a separate communication controller. This combination makes the device useful for industrial controllers, gateways, embedded servers, and connected sensor platforms while preserving a single-chip control architecture. Typical applications include industrial Ethernet gateways, programmable automation controllers, building and energy-management equipment, connected sensor hubs, motor and process-control systems, and communications equipment. The 120 MHz processing rate supports responsive control loops, protocol processing, and supervisory logic. The 1 MB Flash capacity allows firmware, configuration data, and application code to be stored locally, reducing system complexity for embedded networking products. PCB implementation should follow the Infineon pin-description table and reference-manual guidance for power, ground, decoupling, and exposed-pad connections. Place input and bulk-decoupling capacitors close to their associated supply pins, provide a low-impedance ground plane, and thermally couple the exposed pad to a sufficiently large copper area. Validate the final board under maximum processor activity, Ethernet traffic, and the highest intended ambient temperature. This product page combines the official ordering information with practical architecture guidance, application fit, package considerations, and parameter-level replacement analysis. It is structured to help engineers identify whether the 120 MHz Cortex-M4 core, 1 MB Flash configuration, Ethernet integration, and 100-pin industrial package align with a specific embedded-control design.

طلب عرض سعر اتصل بنا
XMC4500F100K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500F100K768ACXQMA1

XMC4500F100K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4500F100K768ACXQMA1 is an industrial 32-bit ARM Cortex-M4 microcontroller operating at 120 MHz, with 768 KB of Flash memory and Ethernet connectivity in a 100-pin LQFP package with an exposed pad. The device supports 1.3 V and 3.3 V operation and is positioned for energy-efficient industrial embedded systems that require CAN, LIN, Ethernet and configurable peripheral resources. An ARM Cortex-M4 microcontroller is a 32-bit embedded processor that combines a processor core with memory interfaces, interrupt control, timers, communication peripherals and other programmable hardware. In the product hierarchy, the XMC4500 belongs to the XMC4000 family of industrial microcontrollers and combines real-time control capability with extensive communications and peripheral integration. It is intended for equipment requiring deterministic control and multiple communication interfaces without a separate external microcontroller. The XMC4500F100K768ACXQMA1 combines a 120 MHz Cortex-M4 core with 768 KB of Flash in an LQFP-100 package. Its configurable peripheral set allows an industrial design to tailor I/O resources to a specific control system. Ethernet support expands the application range to connected industrial equipment, while CAN and LIN connectivity supports communication with sensors, actuators, service tools and other nodes on industrial networks. This integration can reduce the number of discrete interface devices required around the main controller. A Cortex-M4-based architecture supports efficient execution of control tasks, communications stacks and supervisory functions in one device. The 100-pin LQFP package also exposes more I/O than small leadless packages, simplifying assembly for industrial prototypes and production lines equipped for conventional leaded-package soldering. Typical applications include industrial motor drives, motion-control equipment, factory automation controllers, building automation nodes, Ethernet-connected machinery and CAN or LIN network gateways. The combination of 120 MHz processing, 768 KB of Flash and multiple communications options is useful when the controller must manage several real-time loops while exchanging diagnostic or supervisory data. Hardware design should begin with the manufacturer's XMC4500 pin-description table, power and decoupling recommendations, and exposed-pad thermal layout. Place input and bulk capacitors close to their supply pins, connect the exposed pad to the appropriate ground-plane copper, and verify signal levels for all 1.3 V and 3.3 V interfaces before releasing a PCB for production. This product page consolidates the confirmed controller identity, memory capacity, package, voltage options, communications features, sourcing information and design considerations into an engineering-focused reference. The ordering code remains the controlling identifier for package, temperature, qualification and delivery configuration, so designers should compare the complete suffix when qualifying a substitute.

طلب عرض سعر اتصل بنا
XMC4500F144F1024ACXQMA1 - 120MHz ARM MCU | Infineon
XMC4500F1024ACXQMA1

XMC4500F144F1024ACXQMA1 - 120MHz ARM MCU | Infineon

The Infineon Technologies XMC4500F144F1024ACXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with a 120 MHz operating frequency, 1 MB of flash memory, and Ethernet connectivity in a 144-pin PG-LQFP package. The device combines a high-performance Cortex-M4 processor with an integrated industrial peripheral set for energy-efficient embedded control. It is supplied for 1.3 V and 3.3 V operation, making it suitable for industrial Ethernet equipment, automation controllers, connected machines, and embedded communication systems. An Arm Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor within the broader embedded processor and semiconductor hierarchy. The Cortex-M4 architecture is designed for deterministic real-time control, efficient interrupt handling, and energy-efficient execution. Infineon positions the XMC4500 as an industrial member of the XMC4000 family, combining general-purpose embedded processing with communication and configurable peripherals rather than functioning merely as a general-purpose microcontroller. The principal operating characteristics include a 120 MHz clock, 1 MB of flash organized as 1M x 8, 32-bit processing, and integrated Ethernet. Its 144-pin LQFP-13 package provides a high pin count suitable for parallel and digital interfaces. The manufacturer identifies the component as an industrial 32-bit microcontroller with an ARM Cortex-M4 core and 1024 kByte of flash. These characteristics distinguish it from smaller Cortex-M devices that offer fewer pins, less flash, or no integrated Ethernet. The XMC4500 family uses a configurable peripheral concept, allowing designers to tailor the device around communication, timing, serial, and application-specific control requirements. Its Ethernet capability makes the MCU suitable for networked industrial equipment without requiring a separate communications controller. Software development is supported through the Infineon XMC ecosystem and DAVE configuration tooling. Firmware designers should use the XMC4500 reference manual together with the manufacturer datasheet when assigning peripheral functions, pins, clocks, and interrupts. Typical applications include industrial Ethernet switches, motor and motion controllers, factory automation nodes, building automation interfaces, connected sensors, industrial communications equipment, and embedded gateway platforms. For designs requiring more program storage than a 768 kByte alternative, the 1 MB configuration provides additional code and data headroom. For designs whose software organization depends on an external memory interface instead of the F-series internal flash interface, the K-series device may require firmware and board-level review before substitution. A critical implementation consideration is the exposed-pad connection. Infineon specifies that all VSS, VSSA, and VSSO pins share a common ground potential and that the exposed die pad in applicable packages must also connect to common ground. The PCB should therefore provide a low-impedance ground plane, adequate thermal-via distribution, and decoupling close to the supply pins. Pin multiplexing and alternate-function selection must be checked in the datasheet pin table before finalizing the board. This page combines the manufacturer product information, datasheet, reference manual, distributor availability records, and carefully qualified same-package alternatives. It also organizes the device for industrial design decisions by covering the Cortex-M4 architecture, 120 MHz performance, 1 MB flash, Ethernet integration, common-ground construction, and the engineering checks required for an LQFP-144 migration.

طلب عرض سعر اتصل بنا
XMC4500F144F768ACXQMA1 - 120MHz Cortex-M4 | Infineon
XMC4500F144F768ACXQMA1

XMC4500F144F768ACXQMA1 - 120MHz Cortex-M4 | Infineon

Infineon Technologies XMC4500F144F768ACXQMA1 is a 32-bit ARM Cortex-M4 microcontroller operating up to 120 MHz, with 768 KB of flash memory, 160 KB of SRAM, and a 144-pin LQFP package. It belongs to the XMC4500 industrial microcontroller family and combines deterministic real-time control with Ethernet, CAN, LIN, mixed-signal acquisition, and timer/PWM resources. An industrial microcontroller is a semiconductor designed for embedded control systems that must monitor inputs, execute control algorithms, and manage communications in real time. The XMC4500 family combines an Arm Cortex-M4 processor core with configurable peripherals, analog-to-digital conversion, and communication interfaces. This hierarchy places the device between a general-purpose microcontroller and a highly integrated industrial control platform. The XMC4500F144F768ACXQMA1 provides 768 KB of flash for firmware and 160 KB of SRAM for working memory. Its Cortex-M4 architecture supports 32-bit processing at up to 120 MHz, while the peripheral set includes CAN and LIN networking, Ethernet connectivity, mixed-signal acquisition, and timer/PWM control functions. The extended industrial temperature range of -40°C to +85°C supports operation across commercial and industrial environments. A 144-pin LQFP exposes the device's extensive analog, digital, communications, timer, and debug resources while retaining a surface-mount assembly format. The XMC4500 platform uses a configurable peripheral approach, allowing software developers to organize communication, timing, and acquisition functions around the requirements of a specific machine or controller. Pin assignment, alternate functions, and peripheral routing must be confirmed in the pin-description tables of the manufacturer datasheet. Typical applications include industrial Ethernet controllers, CAN and LIN network gateways, motor-control and timer/PWM platforms, programmable automation equipment, sensor-acquisition systems, and embedded factory communication nodes. The combination of 120 MHz processing, 768 KB of flash, and mixed-signal acquisition makes the device suitable for controls that require both communications bandwidth and deterministic peripheral operation. PCB design should provide a complete low-frequency decoupling network, clean grounding for analog inputs, and careful signal-integrity routing for Ethernet and other communications. Firmware should configure pins, clocks, analog channels, and communication objects explicitly because the XMC4500 uses flexible peripheral multiplexing. The 144-pin package also requires adequate copper area and a thermal-aware layout to support reliable operation near the upper temperature limit. This page organizes the core MCU specifications, practical application fit, comparison points, and design guidance around the XMC4500F144F768ACXQMA1. It also identifies where pin-level and production-qualification decisions require confirmation against the current Infineon datasheet and errata.

طلب عرض سعر اتصل بنا
XMC4500F144K1024ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500F144K1024ACXQMA1

XMC4500F144K1024ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon XMC4500F144K1024ACXQMA1 is a 32-bit industrial ARM Cortex-M4 microcontroller with 120 MHz maximum clock frequency, 1024 kByte flash memory, and 160 kByte SRAM in a 144-pin LQFP package. It combines an industrial communications-focused microcontroller platform with Ethernet connectivity for connected industrial equipment, automation systems, and embedded network controllers. An ARM Cortex-M4 microcontroller is a 32-bit embedded processing device built around the Cortex-M4 processor core. The MCU hierarchy extends from a general-purpose microcontroller to a real-time embedded controller, with integrated flash, SRAM, digital peripherals, communication interfaces, and interrupt control. Infineon positions the XMC4500 within its XMC4000 family for energy-efficient industrial applications requiring configurable peripherals and Ethernet support. The principal device features include a 120 MHz maximum operating frequency, 1 MB of flash organized as 1M x 8, and 160 kByte of SRAM. Its 144-pin LQFP package provides access to the extensive XMC4500 peripheral set while supporting compact industrial control-board layouts. The ordering designation identifies an industrial-grade XMC4500 configuration with 1024 kByte flash and the XQMA1 package and qualification suffix. The device combines high-frequency Cortex-M4 processing with on-chip memory and a configurable peripheral set. This architecture allows software-defined control functions, communication protocols, and application-specific interfaces to coexist on one component. Ethernet connectivity makes the microcontroller suitable for embedded gateways and industrial network nodes where local control and network communication must be combined without a separate protocol processor. Typical uses include industrial Ethernet controllers, factory automation equipment, networked motor and motion-control systems, building automation interfaces, and industrial communications gateways. The 120 MHz processing rate supports responsive protocol handling and control-loop execution, while 1024 kByte flash provides room for networking stacks, control firmware, diagnostics, and configuration data. PCB designers should assign all 144 package pins directly from the pin-description and package tables in the Infineon XMC4500 datasheet. They should also preserve the manufacturer's recommendations for supply decoupling, clock circuitry, analog interfaces, and exposed-package routing. Firmware must be tested against the exact ordering designation because suffix changes can represent differences in grade, temperature range, qualification, or package configuration. This product page combines the Infineon ordering information, family-level electrical characteristics, package details, and practical replacement guidance into an engineering-focused resource. It supports component identification, board redesign, firmware planning, and cross-reference work for engineers evaluating the XMC4500F144K1024ACXQMA1 in industrial embedded systems.

طلب عرض سعر اتصل بنا
XMC4500F144K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500F144K768ACXQMA1

XMC4500F144K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4500F144K768ACXQMA1 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at up to 120 MHz with 768 KB of flash memory and a 144-pin LQFP package. It is designed for industrial applications requiring deterministic control, mixed-signal acquisition, networking connectivity, and a broad peripheral set in a single device. A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication peripherals, timers, analog interfaces, and control logic onto one package. The XMC4500 architecture belongs to the hierarchy of embedded processors: ARM Cortex-M4 core, 32-bit microcontroller, XMC4000 family, and industrial embedded control. Its combination of performance and peripheral integration helps reduce the component count in motor-control, communications, and industrial automation systems. Key features include a 120 MHz Cortex-M4 processor, 768 KB of flash storage, 160 KB of RAM, 32-bit processing, and communication functions identified in the product information, including CAN, LIN, and Ethernet. The mixed-signal acquisition capability supports applications where analog measurement and digital control must operate in the same embedded platform. The industrial-grade ordering designation is associated with the XMC4500-F144K768-AC family. The device uses an industry-standard ARM Cortex-M4 processor core and a configurable peripheral set intended for energy-efficient industrial applications. At 120 MHz, it provides substantially greater computation headroom than slower general-purpose microcontrollers, while the integrated communications and analog resources reduce the need for separate interface devices. Designers should still verify peripheral availability, pin multiplexing, electrical limits, and package details against the Infineon XMC4500 datasheet before finalizing a PCB. Typical applications include industrial motor control, CAN and LIN network nodes, Ethernet-connected automation equipment, factory sensor hubs, power conversion controllers, and embedded industrial gateways. The XMC4500 is particularly appropriate when local control, communications, and analog acquisition are required in a single controller rather than across multiple discrete devices. The primary design consideration is package and pin planning. The 144-pin LQFP footprint requires a land pattern matching the PG-LQFP-144-13 package, careful escape routing, and adequate decoupling near the supply pins. Engineers should also review clock configuration, communication peripheral multiplexing, and the recommended operating ranges in the manufacturer datasheet before production release. This page combines the manufacturer datasheet, distributor product listings, package information, and engineering-oriented application guidance to make the XMC4500F144K768ACXQMA1 easier to evaluate for industrial embedded designs. The exact ordering information, electrical characteristics, lifecycle status, and peripheral configuration should be confirmed against the current Infineon documentation before procurement.

طلب عرض سعر اتصل بنا
XMC4502-F100F768AB - 120MHz Cortex-M4 MCU | Infineon
XMC4502-F100F768AB

XMC4502-F100F768AB - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4502-F100F768AB is a 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 768 kB of flash memory and an Ethernet MAC, supplied in a PG-LQFP-100-11 package. It belongs to the XMC4000 industrial microcontroller family and targets real-time embedded systems where deterministic control, networking, and peripheral integration are important. The verified product information identifies the device as an industrial ARM Cortex-M4 microcontroller; additional electrical, memory, and peripheral details must be confirmed from the manufacturer datasheet. A microcontroller is a compact embedded computing component that integrates a processor core, memory, communication interfaces, timers, analog and digital peripherals, and power-management functions on one semiconductor die. The Cortex-M4 core provides a 32-bit processing architecture commonly used in industrial automation, communications, motor control, and connected equipment. The XMC4000 family combines this general-purpose core with configurable peripherals intended for real-time control applications. The XMC4502-F100F768AB provides three headline identifiers from the verified data: a 120 MHz operating frequency, 768 kB of flash memory, and integrated Ethernet MAC capability. Its 32-bit Arm Cortex-M4 architecture supports software-controlled system operation, while the XMC4500 family is identified by Arm Keil documentation as a 120 MHz Cortex-M4 device in the XMC4000 sub-family. The package designation PG-LQFP-100-11 identifies a 100-lead LQFP package for PCB integration. The XMC4502-F100F768AB is suited to industrial automation systems that require local control and network connectivity. The Ethernet MAC can support network-connected equipment when paired with the required external interface circuitry and stack. The 120 MHz core provides processing headroom for control loops, communication handling, and supervisory logic. The verified search results also associate the device with industrial automation and XMC-FB applications, but exact peripheral assignments, electrical limits, and pin functions require review of the official Infineon documentation. Typical design work should begin with the package footprint, pin multiplexing, clock configuration, memory map, and Ethernet physical-layer requirements. Because this is a 100-pin LQFP MCU, PCB layout must preserve adequate clearance around fine-pitch leads and provide reliable power, ground, decoupling, and signal-integrity connections. Firmware and tool selection should be checked against the XMC4000 device family pack and the exact ordering variant before production release. This page consolidates the verified manufacturer-family description, distributor identification, package information, tool references, and sourcing links for XMC4502-F100F768AB. It intentionally avoids filling unprovided pin, electrical, temperature, and pricing fields with assumptions; those values should be obtained from the current manufacturer datasheet or an authorized quotation. For a complete design decision, compare the verified 120 MHz, 768 kB flash, Cortex-M4, Ethernet MAC, and PG-LQFP-100-11 characteristics against the system clock, network, memory, package, and qualification requirements. XAIPART can be contacted for availability, pricing, and datasheet support using the MPN.

طلب عرض سعر اتصل بنا
XMC4502-F100K768AB 120MHz 768KB MCU | Infineon
XMC4502-F100K768AB

XMC4502-F100K768AB 120MHz 768KB MCU | Infineon

The Infineon XMC4502-F100K768AB is a 32-bit ARM Cortex-M4 industrial microcontroller operating at 120 MHz, with 768 KB of flash memory and a PG-LQFP-100-11 package. It is designed for real-time industrial control applications requiring deterministic processing, Ethernet connectivity, and a broad peripheral set. An ARM Cortex-M4 microcontroller is a 32-bit embedded processor based on the ARM architecture, combining a processor core, memory, interrupt handling, and peripherals on one integrated circuit. The XMC4500 family belongs to the industrial microcontroller hierarchy and is positioned between general-purpose embedded processors and more specialized control devices. Its role is to execute control software while managing communication, timing, analog, and digital I/O functions in equipment such as industrial controllers and connected automation systems. The verified product information identifies the device as an ARM Cortex-M4 XMC4000-series microcontroller with 120 MHz processing and 768 KB flash. The part is listed in a PG-LQFP-100-11 package, a 100-pin plastic low-profile quad flat package. The package provides a large number of external pins for power, ground, debug, communications, timers, analog functions, and digital I/O. Additional details such as SRAM size, operating voltage range, temperature limits, and Ethernet transceiver specifications are not provided in the retrieved data and therefore require confirmation from the manufacturer datasheet. The XMC4500 family is intended for real-time critical systems, where predictable control response and integrated peripherals can reduce the need for separate interface components. According to the retrieved Infineon product information, the family is associated with industrial ARM Cortex-M4 devices for real-time applications. The Cortex-M4 platform is widely used for embedded control because it supports efficient interrupt-driven software and a broad software ecosystem, including CMSIS-based development workflows. Typical applications include industrial automation equipment, Ethernet-connected control systems, motor and motion-control platforms, building automation controllers, communications equipment, and test systems. The available MPN is especially relevant where a 120 MHz core, 768 KB flash configuration, and 100-pin package are required together. Selection should account for the exact peripheral set, memory map, electrical limits, pin multiplexing, package dimensions, and software support required by the target product. For PCB implementation, treat the PG-LQFP-100-11 footprint and pin multiplexing as design-controlled constraints. Confirm the manufacturer's land pattern, exposed-pad or thermal requirements, decoupling recommendations, and recommended operating region before release to production. This page synthesizes verified distributor information, official product references, available pricing signals, and engineering-oriented selection guidance without inventing unprovided electrical specifications.

طلب عرض سعر اتصل بنا
XMC4502F100F768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4502F100F768ACXQMA1

XMC4502F100F768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4502F100F768ACXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 768 KB of flash memory and an Ethernet MAC in a PG-LQFP-100-11 package. It is designed for embedded industrial systems that combine deterministic real-time control with network connectivity. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and communication interfaces onto one device. The XMC4502 belongs to the XMC4000 family and extends the Arm Cortex-M4 architecture into industrial control. This product type provides higher processing performance than basic 8-bit or 16-bit controllers while retaining deterministic operation suited to motor control, industrial communications, and embedded automation. Key features include a 120 MHz Arm Cortex-M4 processor, 768 KB of flash, a 32-bit architecture, an Ethernet MAC, and support for a 3.3 V operating rail. The 100-pin PG-LQFP package provides access to the digital, analog, timing, communications, and debug resources required by complex control boards. Its industrial positioning makes it appropriate for equipment where predictable control performance and wired network connectivity are important. The Cortex-M4 processing core supports efficient execution of real-time control algorithms and communication firmware. A dedicated Ethernet MAC allows the microcontroller to participate directly in Ethernet-based industrial networks, reducing the need for a separate network controller in suitable designs. The 768 KB flash capacity provides substantially more program storage than entry-level Cortex-M devices, supporting larger application code, protocol stacks, and boot logic. Typical uses include industrial Ethernet controllers, programmable automation equipment, motor and motion-control systems, industrial sensor gateways, and networked machine-control panels. The combination of 120 MHz processing and Ethernet MAC support allows designers to consolidate control and communications into one embedded platform while preserving a compact 100-pin surface-mount footprint. PCB implementation should follow the manufacturer package drawing for pad dimensions, exposed-pad requirements, and recommended land pattern. Decoupling, clock stability, analog grounding, and Ethernet signal routing require careful layout; use the manufacturer datasheet and hardware-design guidance when finalizing the board stack-up and component placement. This page combines the official product identity, distributor specification details, compatible same-family alternatives, application guidance, and practical engineering considerations to support component selection and board-level implementation.

طلب عرض سعر اتصل بنا
XMC4502F100K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4502F100K768ACXQMA1

XMC4502F100K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon Technologies XMC4502F100K768ACXQMA1 is a 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 768 KB of embedded flash and 160 KB of RAM, in a 100-pin PG-LQFP-11 package. It belongs to the XMC4000 family and combines an industrial microcontroller core with an Ethernet MAC, making it suitable for connected industrial control, automation, and communications equipment. The device also includes a hardware floating-point unit for higher-performance arithmetic. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one integrated circuit. The XMC4502F100K768ACXQMA1 belongs to the hierarchy of 32-bit MCU, Arm Cortex-M4 microcontroller, embedded processor, and semiconductor. Its 768 KB flash provides program storage for control software and protocol handlers, while 160 KB of RAM supports working memory, diagnostics, and network data buffers. Key features include a 120 MHz Arm Cortex-M4 core, 768 KB of flash, 160 KB of RAM, an FPU, and Ethernet MAC connectivity. The Ethernet MAC is significant for industrial Ethernet equipment because it allows network communication to be added to a control platform without relying on a discrete network interface. The XMC4000 family also provides configurable peripherals that can be adapted to different industrial application requirements. The controller combines a 32-bit Arm architecture with Infineon industrial peripherals and communication capabilities. Its 768 KB flash is twice the 384 KB often associated with smaller general-purpose Cortex-M4 designs, while the stated 160 KB RAM gives application code additional working space for buffering and real-time processing. At 120 MHz, the core provides the timing headroom expected for protocol handling, digital control loops, and supervisory functions in industrial equipment. Typical applications include industrial Ethernet controllers, factory automation equipment, motor and motion-control supervisory systems, networked sensors, building automation controllers, and industrial gateways. The Ethernet MAC and combination of flash, RAM, and real-time processing make the device appropriate for equipment that must execute control logic while exchanging data with supervisory systems. Designers should preserve the pin assignments and exposed-pad requirements of the PG-LQFP-11 footprint and use the manufacturer datasheet for the complete pin-description table, electrical limits, and decoupling recommendations. Firmware and peripheral assignments should also be checked against the device ordering information because suffix codes identify specific package, temperature, and qualification variants. This product page consolidates the confirmed controller specifications, package information, source links, engineering selection guidance, and clearly qualified replacement analysis. It focuses on practical distinctions among same-family Infineon ordering variants rather than presenting unverified cross-brand substitutions as drop-in choices.

طلب عرض سعر اتصل بنا
XMC4504-F100F512ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4504-F100F512ACXQMA1

XMC4504-F100F512ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4504-F100F512ACXQMA1 is an industrial 32-bit ARM Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of embedded flash memory and Ethernet connectivity. The device is housed in a 100-pin PG-LQFP package designated PG-LQFP-100-11, making it appropriate for industrial control equipment that requires substantial embedded code storage, real-time processing capability, and integrated network communication. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals in one integrated circuit. The ARM Cortex-M4 core belongs to the Cortex-M product family and provides a 32-bit processing architecture suited to real-time embedded control. Within the broader system hierarchy, the XMC4504-F100F512ACXQMA1 is an industrial microcontroller, an embedded processing IC, and a member of Infineon's XMC4000 family. The principal device characteristics are a 120 MHz Cortex-M4 core and 512 KB of flash in a 100-pin LQFP package. Infineon describes the XMC4500 family as combining an industry-standard ARM Cortex-M4 core with a configurable peripheral set. That architecture allows the same device family to address industrial applications with different I/O, communications, and control requirements. The target device also includes Ethernet capability according to the manufacturer product listing. Compared with a small 8-bit or 16-bit control MCU, the Cortex-M4 architecture provides a wider processing model and substantially more program memory for networking stacks, supervisory logic, data processing, and complex state machines. The 120 MHz operating frequency gives designers additional instruction throughput for interrupt-driven control loops and protocol handling, while the 512 KB flash capacity reduces dependence on external program memory in space-constrained industrial designs. Typical uses include industrial Ethernet controllers, automated production equipment, building and factory automation systems, networked sensors, motor-control supervisory electronics, and embedded gateways. The PG-LQFP-100-11 package provides a high pin count suitable for devices requiring multiple I/O functions and communications peripherals, although its size and lead pitch must be considered during PCB layout and manufacturing planning. Designers should verify the complete pin assignment, peripheral availability, clock configuration, memory map, and electrical limits in the manufacturer datasheet before schematic capture. The LQFP footprint should be checked against the board geometry and assembly process, while decoupling and signal routing should follow the recommendations for the selected power and peripheral interfaces. This product page organizes the verified device identity, core performance, memory capacity, package details, Ethernet feature, suitable industrial applications, engineering guidance, and sourcing information into a compact engineering reference for schematic design, PCB planning, and BOM review.

طلب عرض سعر اتصل بنا
XMC4504-F100K512AB 120MHz Cortex-M4 MCU | Infineon
XMC4504-F100K512AB

XMC4504-F100K512AB 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4504-F100K512AB is an industrial 32-bit ARM Cortex-M4 microcontroller operating at 120 MHz, with 512 KB of flash memory, 128 KB of SRAM, and an Ethernet MAC in an LQFP-100 package. It combines deterministic real-time control with industrial communications and is identified as a member of the XMC4000 family. What is an ARM Cortex-M4 microcontroller? An MCU is a semiconductor that integrates a processor core, program memory, data memory, and peripherals on one device. The ARM Cortex-M4 core belongs to the microcontroller hierarchy, where the XMC4504-F100K512AB adds Infineon timing, communications, analog, and digital-control resources for embedded industrial systems. Its 512 KB flash supports firmware storage, while 128 KB SRAM provides working memory for control loops and communication tasks. The verified product information identifies a 120 MHz processor, 512 KB flash, 128 KB SRAM, Ethernet MAC, and LQFP-100 package. Search results also describe the device as part of Infineon’s XMC4000 family and identify associated peripherals including DMA, I2S, LED, POR, PWM, and watchdog functions. The available source data does not provide verified values for every electrical limit, pin function, peripheral characteristic, or package dimension, so those details remain marked as data needed. The target MPN is associated with Infineon ordering information that distinguishes it from the similarly named XMC4504-F100K512-AC. The verified search results identify XMC4504-F100K512-AC as an industrial ARM Cortex-M4 device with the same headline 120 MHz, 512 KB flash, and 128 KB SRAM characteristics, but the supplied data does not establish every pin-level difference. Direct substitution therefore requires comparison of the exact package drawing, pin names, electrical ratings, memory map, and qualification markings. Typical design roles include industrial automation, motor and motion control, networked embedded equipment, and real-time control systems where deterministic peripheral timing and Ethernet connectivity are useful. The Ethernet MAC makes the device relevant to connected industrial controllers, provided the design includes suitable PHY, magnetics, routing, and signal-integrity implementation. The LQFP-100 package requires careful PCB escape routing, decoupling, exposed thermal considerations where applicable, and verification of all 100 pins against the manufacturer package drawing. This page combines verified Infineon and distributor information with clearly identified missing-data boundaries rather than inferring undocumented specifications.

طلب عرض سعر اتصل بنا
XMC4504-F144F512AB - 120MHz Cortex-M4 MCU | Infineon
XMC4504-F144F512AB

XMC4504-F144F512AB - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4504-F144F512AB is a 32-bit ARM Cortex-M4 industrial microcontroller operating at 120 MHz, with 512 KB of flash memory and a 144-pin PG-LQFP-24 package. It belongs to the XMC4000 family and is designed for industrial applications requiring deterministic real-time control, connected peripherals, and a broad set of analog and digital interfaces. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces on one semiconductor device. In the hierarchy of electronic components, this MCU sits below embedded processor and below the broader category of semiconductors, while it is above general-purpose control logic in system-level terminology. The ARM Cortex-M4 core provides a 32-bit processing environment suitable for motor control, industrial automation, communications, and embedded measurement systems. The verified data identifies the XMC4504-F144F512AB as an XMC4000-series device with 120 MHz operation, 512 KB flash, an Ethernet MAC, 32-bit architecture, and a 144-pin LQFP package. The related Infineon XMC4504-F144K512-AC product page identifies the same 120 MHz, 512 kB, Ethernet MAC platform for industrial applications, providing useful family-level context while the exact orderable MPN remains the requested AB variant. The part is especially relevant when a design needs substantial embedded processing alongside Ethernet connectivity. The 120 MHz core can support protocol handling, supervisory control, signal processing, and real-time control tasks, while the 512 KB flash capacity provides a practical balance between firmware storage and system integration. The LQFP-144 package exposes a broad pin count for external peripherals and mixed-signal interfaces. Typical uses include industrial Ethernet equipment, factory automation controllers, building and infrastructure electronics, communication gateways, and embedded control platforms. Engineers should verify the exact peripheral assignments, electrical limits, pin multiplexing, startup configuration, memory map, and package details against the manufacturer documentation before layout or firmware deployment. The principal design consideration is package and software verification rather than headline performance. Confirm that the PCB land pattern matches the exact 144-pin LQFP variant, that all required power, clock, reset, debug, and communication signals are available, and that the selected toolchain supports the XMC4000 family. This page consolidates the verified source information, source links, application context, and engineering caveats without inventing unavailable electrical details.

طلب عرض سعر اتصل بنا
XMC4504F100K512ACXQMA1 - Cortex-M4 120MHz MCU | Infineon
XMC4504F100K512ACXQMA1

XMC4504F100K512ACXQMA1 - Cortex-M4 120MHz MCU | Infineon

Infineon Technologies XMC4504F100K512ACXQMA1 is an industrial 32-bit microcontroller built around an Arm Cortex-M4 processor core operating at 120 MHz. It provides 512 KB of flash memory, 128 KB of SRAM, and an Ethernet MAC in a 100-pin LQFP package with an exposed pad. The device is intended for embedded industrial systems requiring deterministic real-time control, Ethernet connectivity, and a substantial local memory configuration. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. Within the embedded-control hierarchy, the Cortex-M4 core belongs to the Arm Cortex-M family of 32-bit RISC processors. The XMC4000 family combines that core with industrial-oriented peripherals, flash, SRAM, communications interfaces, and clock-management resources, making the XMC4504 suitable for control systems that need both computation and network connectivity. The main architectural features are a 120 MHz operating frequency, 512 KB of flash, 128 KB of SRAM, and integrated Ethernet MAC functionality. Flash supports code storage and firmware updates, while SRAM provides working memory for protocol stacks, control state, diagnostics, and real-time tasks. The Ethernet MAC allows the controller to participate in a network without requiring a separate MAC block elsewhere in the system. Infineon identifies the device as part of its industrial XMC4000 microcontroller family. The XMC4504-F100F512-AC ordering designation identifies a 120 MHz Cortex-M4 industrial microcontroller with 512 KB of flash and 128 KB of SRAM. This part is supplied in a PG-LQFP-100 package with an exposed pad and is offered in tray packaging according to the product listing. The exposed thermal pad provides a direct heat-transfer path into the PCB, while the large 100-pin package exposes the device's broader pin and peripheral configuration. Typical applications include industrial Ethernet controllers, programmable automation equipment, connected sensor-hub systems, industrial gateways, motion-control equipment, and embedded data-acquisition platforms. In each case, the 512 KB flash capacity can hold application firmware and protocol components, while the 128 KB SRAM can support networking buffers and real-time control state. An external Ethernet PHY is still required for the physical network interface when the MCU supplies only the Ethernet MAC. PCB design should prioritize clean supply decoupling, a solid thermal-pad connection, and controlled routing of high-speed Ethernet signals. Place the input and bypass capacitors close to their associated supply pins, connect the exposed pad to the appropriate ground plane, and follow the package and layout guidance in the Infineon datasheet. Validate the complete clock, PHY, magnetics, and signal-integrity implementation before production release. This page consolidates the manufacturer specifications, memory and connectivity requirements, package characteristics, application guidance, and replacement considerations into a practical engineering reference. It also distinguishes confirmed ordering information from areas that require device-specific validation before schematic release or firmware deployment.

طلب عرض سعر اتصل بنا