الدوائر المتكاملة

DSPIC33EV32GM002-E/SS

DSPIC33EV32GM002-E/SS - 16-bit 5V DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33EV32GM002-E/SS is a 16-bit digital signal controller (DSC) from the 5V-robust dsPIC33EV family, featuring 32KB of Flash program memory, 4KB of RAM, and a dsPIC DSC core running at up to 60 MHz clock frequency (70 MIPS class performance at 5V), housed in a 28-pin SSOP package (5.30 mm width). The -E suffix denotes the extended temperature range of -40C to +125C, and the device is AEC-Q100 qualified for automotive applications. A digital signal controller combines the computational throughput of a microcontroller with DSP capabilities such as single-cycle multiply-accumulate and hardware division, sitting in the product hierarchy between general-purpose MCUs (like PIC16/PIC18) and dedicated DSP processors. DSCs are the preferred choice for closed-loop control systems such as motor control, digital power conversion, and sensor signal conditioning. Key differentiating features of this family include native 5V operation for improved noise immunity in harsh electrical environments, on-chip peripherals such as advanced PWM, SENT, LIN, and CAN communication interfaces, and integrated analog including high-speed ADC and op amps on larger family members. The Peripheral Pin Select (PPS) architecture allows flexible remapping of digital peripherals to physical pins, easing PCB layout and reducing board cost. Technically, the dsPIC33EV core executes most instructions in a single cycle with a 16-bit modified Harvard architecture, dual 40-bit accumulators, and DSP instruction support. Four DMA channels offload data movement from the CPU, and seven to nine timers support precise event timing. Flash self-programming enables field firmware updates, and the VCAP pin requires an external low-ESR capacitor for the internal 2.5V core regulator. Typical applications include automotive sensors and touch control units, BLDC/DC motor control with safety features, appliance power supplies, and industrial automation nodes exposed to electrical noise. The 5V rail simplifies direct interfacing with precision sensors without level shifting. Design consideration: keep the VCAP capacitor close to the device with a low-ESR ceramic value as specified in the family data sheet DS70005144H, and connect all VDD/VSS pairs and AVDD/AVSS properly to maintain ADC accuracy. This page synthesizes distributor pricing, same-family drop-in alternatives, FAQs, and practical design notes not found on a single manufacturer or distributor page.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM002-I/SP

DSPIC33EV32GM002-I/SP - 16-bit 70 MIPS 5V DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33EV32GM002-I/SP is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering 70 MIPS performance at 5V with 32KB (11K x 24) of Flash program memory and 4KB of RAM, packaged in a 28-pin SPDIP (SP) through-hole package. A digital signal controller combines the compute architecture of a digital signal processor (DSP) with the peripheral integration and control-oriented ease of a microcontroller. In the power management IC hierarchy, the dsPIC33EV family sits in the 16-bit embedded MCU/DSC class and is engineered specifically for robust operation in harsh electrical environments, with a 5V-tolerant supply range of 4.5V to 5.5V that eliminates the level-shifting circuitry 3.3V controllers require when driving motors, relays and industrial sensors. Key features include the 16-bit dsPIC33EV core running at 70 MIPS, 4 DMA channels for peripheral-to-memory transfers without CPU intervention, multiple internal bus architectures, and low-power modes. DigiKey lists the device as a Functional Safety (FuSa) capable dsPIC33EV microcontroller, supporting safety-oriented development flows. The family datasheet highlights on-chip PWM, SENT and op-amp peripherals targeted at safety motor control. The dsPIC33EV32GM002 uses Microchip's enhanced Flash process with in-circuit serial programming (ICSP) via any PGECx/PGEDx pair, and is supported by the MPLAB X IDE and XC16 compiler toolchain. The 28-pin SPDIP package makes the device popular on breadboards, test rigs and legacy through-hole production lines. Typical applications include appliance motor control, industrial automation nodes, automotive sensors and control units, and 5V sensor-conditioning systems where the integrated op amps and SENT interface reduce external component count. Designers should budget the 4KB RAM carefully, as DSP filtering and communications buffering consume it quickly, and provide decoupling close to both VDD pins. This page synthesizes distributor availability, same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet. Pricing shown is an estimate as of 2026-09-26 and must be confirmed with distributors.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM002-I/SS

DSPIC33EV32GM002-I/SS - 16-bit 5V 70 MIPS DSC | Microchip

The Microchip Technology DSPIC33EV32GM002-I/SS is a 16-bit digital signal controller (DSC) with a 5V, 70 MIPS dsPIC DSC core, 32KB of Flash program memory and 4KB of RAM, housed in a 28-pin SSOP package with 0.65mm pin pitch. A digital signal controller combines the compute architecture of a microcontroller with DSP-capable math features such as hardware multiply-accumulate, division assist, and barrel shifters. Within the power-management hierarchy, the dsPIC33EV family sits in the 16-bit DSC class, positioned between general-purpose MCUs and full DSPs, and is specifically engineered for 5V operation where robustness against electrical noise matters. Key features of this device include 5V operation across a 4.5V to 5.5V supply range, an operating temperature range of -40C to +85C (industrial, per the -I suffix), 4 DMA channels, 9 timers, and a rich peripheral set including advanced motor-control PWM, SENT, LIN, and CAN 2.0B communications, plus on-chip analog such as a 12-bit ADC and integrated op amps. Peripheral Pin Select (PPS) allows remapping of digital peripherals onto 21 GPIO pins, maximizing layout flexibility. The dsPIC33EV GM core executes most instructions in a single cycle at up to 70 MIPS, with DSP engine support for FIR/IIR filtering and FOC-type motor algorithms. Flash is rated for in-circuit self-programming, and the device supports ICSP/ICD debugging via any PGECx/PGEDx pin pair. The 5V I/O simplifies direct interfacing with sensors and gate drivers without level shifting. Typical applications include BLDC/PMSM and ACIM motor control in appliances, automotive body and sensing modules (AEC-Q100 qualified family), industrial automation nodes on CAN or LIN buses, and SENT-interface sensor processing in harsh, high-noise environments. For design, remember the internal regulator requires a low-ESR capacitor on the VCAP pin, and all VDD/VSS pairs must be decoupled close to the package. MCLR must be pulled up for reliable in-circuit programming. This page synthesizes distributor pricing, drop-in family alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM003-E/M5

DSPIC33EV32GM003-E/M5 - 16-bit 5V DSC 32KB Flash 60MHz | Microchip

The Microchip Technology DSPIC33EV32GM003-E/M5 is a 16-bit digital signal controller (DSC) with a 5V-tolerant dsPIC33EV core running at 60 MHz (up to 70 MIPS family performance), 32KB of ECC Flash program memory, and 4KB of RAM, housed in a 36-pin UQFN package with exposed pad (M5 suffix). A digital signal controller combines the compute throughput of a DSP with the peripheral integration and control peripherals of a microcontroller. Within the power management hierarchy, the DSC sits between a general-purpose MCU and a standalone DSP, making it the natural choice for real-time control loops such as field-oriented motor control and digitally controlled power supplies. Key features include Error Correction Code (ECC) Flash for functional-safety-oriented designs, six motor-control PWM channels with dead-time insertion, three on-chip operational amplifiers that reduce external analog component count, a Charge Time Measurement Unit (CTMU) for capacitive touch and time-based measurement, and a SENT peripheral conforming to automotive sensor interfaces. The 5V operation provides superior noise immunity in harsh electrical environments compared to 3.3V controllers. Architecturally, the dsPIC33EV core uses a modified Harvard pipeline with DSP multiply-accumulate instructions, multiple internal buses, 4 DMA channels, and 9 timers, enabling single-cycle MAC operations on 16-bit data. The extended temperature -40C to +125C rating (E suffix) and AEC-Q100 qualification target automotive and industrial deployment. Typical applications include safety-critical BLDC/PMSM motor control, automotive body and powertrain subsystems, appliance motor drives, and industrial power conversion. The onboard op amps interface directly with current shunts for closed-loop control without external amplifiers. Design consideration: the exposed pad is the primary thermal and ground path; connect it to a solid ground plane with multiple vias to meet thermal and EMC targets. This page synthesizes distributor pricing, drop-in family alternatives, and practical design guidance not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM003-I/M5

DSPIC33EV32GM003-I/M5 - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV32GM003-I/M5 is a 16-bit dsPIC33EV digital signal controller (DSC) delivering up to 70 MIPS from its 5V-robust dsPIC DSC core, with 32KB (11K x 24) of ECC Flash program memory, 4KB of RAM, and a 36-pin UQFN (5x5 mm) package with exposed pad (EP). A digital signal controller combines the compute capability of a DSP (hardware MAC, DSP engine with single-cycle multiply-accumulate) with the peripheral integration and control architecture of a microcontroller. Within the power-management hierarchy, a DSC sits above general-purpose MCUs and below application-specific ASSPs, making it a common choice for real-time closed-loop control such as field-oriented motor control and digital power conversion. Key features of the DSPIC33EV32GM003 include a wide 1.8V to 5V operating environment with a 5V-tolerant design for harsh environments, 6 motor-control PWM channels with complementary outputs and fault protection, 3 on-chip analog op-amps, 4 DMA channels, 9 timers, and an extended-temperature variant family. The integrated op-amps reduce external component count in current-sense paths for motor drives and digital power supplies. The architecture runs at up to 60 MHz internal clock (70 MIPS instruction rate), with ECC Flash protecting program memory integrity for functional-safety-oriented designs; DigiKey lists the family under Functional Safety (FuSa) keywords. Deep sleep and low-power modes support battery-backed and standby operating points. Typical applications include appliance motor control (compressors, fans, pumps), automotive sensor and touch/control units operating in noisy environments, industrial drives, and digital power supplies where the 6 MC PWM channels and 3 op-amps form a compact control loop. Design consideration: at 5V operation the UQFN exposed pad must be soldered to a solid ground pour for both thermal dissipation and EMI performance; the 36-pin UQFN 0.5 mm pitch demands careful PCB land-pattern control per the Microchip layout guidance. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM003T-I/M5

DSPIC33EV32GM003T-I/M5 - 16-Bit 5V DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33EV32GM003T-I/M5 is a 16-bit 5V digital signal controller (DSC) from the dsPIC33EV family, delivering up to 70 MIPS (60 MHz instruction clock) from 32KB of ECC-protected Flash and 4KB of RAM in a 36-pin UQFN (5x5 mm, M5) surface-mount package with exposed pad. A digital signal controller combines the peripheral set and control architecture of a microcontroller with the mathematical throughput of a DSP core in a single device. Within the power-management hierarchy, the dsPIC33EV sits in the microcontroller/DSC class of semiconductors and is specifically optimized for real-time control loops, where deterministic interrupt latency and fast multiply-accumulate operations drive motors, converters, and sensor systems. Key differentiating features include 6 motor-control PWM channels, 3 integrated operational amplifiers, a Charge Time Measurement Unit (CTMU), SENT peripheral support for automotive sensor interfaces, and 4 DMA channels alongside 7 timers. The 5V-tolerant operation distinguishes the dsPIC33EV family from most 3.3V competitors, simplifying interfacing with automotive sensors and industrial 5V logic while improving noise margins in harsh electrical environments. Architecturally, the dsPIC33E CPU implements an enhanced 16-bit modified Harvard pipeline with DSP multiply-accumulate, barrel shifter, and hardware division, enabling single-cycle MAC operation at 70 MIPS. ECC Flash protects program memory against bit errors, supporting the functional-safety (FuSa) positioning of the family. Peripherals such as the motor-control PWM with dead-time insertion directly support field-oriented motor control without external analog front-ends, because the on-chip op amps condition current-shunt signals. Typical applications include automotive body and powertrain subsystems (SENT sensors, relay drivers), appliance motor control (fans, pumps, compressors), and industrial power conversion where a 5V DSC with integrated analog reduces bill-of-material count. Design consideration: the 36-UQFN exposed-pad package requires a solid ground vias-in-pad PCB design; provide at least a 3x3 via array under the exposed pad to the ground plane for both thermal and electrical performance. This page synthesizes distributor pricing tiers, drop-in alternatives within the dsPIC33EV family, and practical design notes not found in the manufacturer datasheet. Pricing references are as of 2026-09-26.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM004-E/ML

DSPIC33EV32GM004-E/ML - 16-bit 5V DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33EV32GM004-E/ML is a 16-bit 5V digital signal controller (DSC) with 32KB (11K x 24) ECC Flash, 4KB RAM, and a dsPIC33EV core delivering up to 60 MIPS, housed in a 44-pin QFN (8x8 mm) package rated for -40C to +125C operation. A digital signal controller combines the compute architecture of a microcontroller with DSP-capable instruction extensions such as multiply-accumulate (MAC) and barrel shifting. In the power-management hierarchy, a DSC sits above general-purpose MCUs and below dedicated DSPs, making it the preferred choice when real-time control loops (FOC, PID, sensor fusion) must run on the same chip that manages the application logic. Key features of the DSPIC33EV32GM004-E/ML include a wide 4.5V to 5.5V operating voltage that lets it interface directly with 5V industrial sensors and automotive logic without level shifters, 6 motor-control PWM channels, 3 on-chip operational amplifiers for current-shunt conditioning, a Charge Time Measurement Unit (CTMU) for touch sensing and time measurement, and a SENT peripheral for automotive sensor networks. The ECC Flash protects program memory against single-bit faults, supporting functional-safety-oriented designs. Technically, the dsPIC33EV core is a modified Harvard 16-bit architecture with DSP instruction extensions, 16 x 16 working registers, and deterministic interrupt latency. The 60 MHz internal clock delivers 60 MIPS peak performance. Peripherals include multiple UART, SPI and I2C ports, a 12-bit ADC, and comparators, reducing external BOM count in motor-drive and power-conversion nodes. Typical applications span brushless DC (BLDC) and PMSM motor control in appliances, electric power steering and pump control in automotive subsystems, digital power supplies, and harsh-environment industrial sensing where vibration, noise, and wide temperature swings rule out 3.3V-only MCUs. For design, budget the 44-QFN exposed pad as the primary ground and thermal path: connect it to a solid ground plane with an array of vias. The -E temperature grade (-40C to +125C) permits under-hood-adjacent placement, but verify junction temperature at maximum MIPS load. This page synthesizes distributor pricing, drop-in same-package alternatives, design notes, and application guidance not found in the manufacturer datasheet, verified as of 2026-09-26.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM004-E/P8

DSPIC33EV32GM004-E/P8 - 16-Bit 5V DSC 60MHz 48-TQFP | Microchip

The Microchip Technology DSPIC33EV32GM004-E/P8 is a 16-bit 5V digital signal controller (DSC) delivering 60 MHz performance with 32KB of ECC-protected Flash (11K x 24) and 4KB of RAM, housed in a 48-pin TQFP (7x7 mm) package rated from -40C to +125C for extended-temperature operation. A digital signal controller (DSC) combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, a DSC sits between general-purpose MCUs and dedicated DSPs, making it the natural choice for closed-loop motor control and power conversion where fast multiply-accumulate operations and precise PWM generation must coexist. Key features of this device include 6 motor-control PWM channels (6 MC PWM), three integrated operational amplifiers (Op Amps) for current-sense signal conditioning, a Charge Time Measurement Unit (CTMU) for capacitive touch and precision time measurement, and a SENT peripheral for automotive sensor interfaces. The 5V operating range (4.5V to 5.5V) directly tolerates noisy 12V automotive and industrial rail environments after simple regulation, improving noise immunity compared to 3.3V-only controllers. Architecturally, the dsPIC33EV family uses the 16-bit dsPIC DSC core with DSP instruction support, single-cycle MAC, and hardware division. ECC Flash protects program memory against single-bit faults, supporting functional safety (FuSa) designs, and the family is AEC-Q100 qualified for automotive use. Peripheral set includes UART, SPI, I2C, QEI, and high-speed 12-bit ADC channels for current and voltage feedback loops. Typical applications include BLDC and PMSM motor drives for appliances, automotive pumps and fans, DC-DC converters, electronic power steering assist units, and industrial HVAC blowers. The three on-chip op amps reduce external component count in shunt-based current-feedback loops. Design consideration: enable the internal voltage regulator with a low-ESR capacitor on VCAP, and use the ECC Flash option plus watchdog timer when targeting safety-relevant motor control functions. This page synthesizes distributor pricing, drop-in family alternatives, pinout guidance, and practical design notes not consolidated in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM004-I/P8

DSPIC33EV32GM004-I/P8 - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip DSPIC33EV32GM004-I/P8 is a 16-bit 5V digital signal controller (DSC) from the dsPIC33EV family, delivering 70 MIPS performance with 32KB of ECC-protected Flash and 4KB of RAM in a 48-pin TQFP (7x7 mm) package. It integrates six motor-control PWM channels, three on-chip operational amplifiers, a Charge Time Measurement Unit (CTMU), and SENT peripheral support for automotive sensor interfaces. A digital signal controller combines the compute throughput of a DSP with the peripheral set and deterministic control of a microcontroller, sitting between a general-purpose MCU and a dedicated DSP in the embedded hierarchy. The dsPIC33EV family extends this concept with a 5V-tolerant core, allowing direct connection to industrial 5V I/O rails without level shifting. Key features include ECC Flash for functional-safety (FuSa) designs, a wide 4.5V to 5.5V operating range, an industrial temperature rating of -40C to +85C (the -I suffix), and Peripheral Pin Select (PPS) for flexible pin mapping. The three integrated op amps reduce external component count in current-sense and signal-conditioning front ends. Technically, the dsPIC33E core uses a modified Harvard architecture with a 16-bit data path, DSP multiply-accumulate instructions, and dual operand fetch, enabling single-cycle MAC operations for filter and control-loop algorithms. The 6-channel motor-control PWM supports complementary outputs with dead-time insertion for three-phase inverter drive. Typical applications include BLDC and PMSM motor control for appliances, automotive sensor and touch control units, power-factor-correction converters, and industrial automation nodes operating in harsh, noisy environments. Design consideration: because the core runs at 5V, junction temperature and PCB copper thermal relief matter more than in 3.3V designs; verify thermal margins at full 70 MIPS load using the industrial temperature rating as the ceiling. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design guidance not consolidated in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM004-I/PT

DSPIC33EV32GM004-I/PT - 16-Bit 5V 70 MIPS DSC 44-TQFP | Microchip

The Microchip Technology DSPIC33EV32GM004-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering 70 MIPS performance from a 5V-tolerant core with 32KB (11K x 24) of flash program memory and 4KB of RAM, housed in a 44-pin TQFP (10x10 mm) surface-mount package rated from -40C to +85C. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and control logic of a microcontroller, sitting within the broader hierarchy of embedded processors: DSC -> 16-bit microcontroller -> microprocessor-based control system. The dsPIC33EV GM family is specifically engineered for 5V industrial environments where 3.3V MCUs require level shifting, making it a direct fit in harsh settings with noise and vibration. Key features include the 5V operating range of 4.5V to 5.5V, eliminating external level translators in industrial 5V signal chains; a 70 MIPS modified Harvard architecture core with DSP engine for real-time control loops; 4 DMA channels that offload data movement from the CPU; and 9 timers plus 3 external interrupt sources for complex event sequencing. Functional Safety (FuSa) support documentation is available per DigiKey classification, aiding IEC 61508-oriented designs. Technically, the device uses Microchip's dsPIC33E core with a 24-bit instruction word, hardware DSP multiply-accumulate unit, and Peripheral Pin Select (PPS) that allows remapping of digital peripherals such as UART, SPI, I2C, and motor-control PWM onto flexible RPn pins - a major advantage during PCB layout and board revisions. On-chip flash of 32KB with ECC-style self-programming and 4KB of RAM covers typical sensor fusion, PFC, BLDC/ACIM motor control, and power-conversion firmware footprints. Typical applications include automotive sensor and touch-control units, industrial motor drives, appliance control boards, switched-mode power supplies, and digital power conversion where 5V noise immunity and DSP math throughput are essential. The 44-TQFP package exposes enough I/O for quadrature encoder interfaces, complementary PWM outputs, and analog channels. Design consideration: the dsPIC33EV family requires an external VCAP/VDDCORE stabilization capacitor per the datasheet - do not omit it, and follow Microchip's layout guidance for decoupling in noisy 5V environments. This page adds value beyond the manufacturer datasheet by synthesizing distributor pricing (as of 2026-09-26), drop-in same-footprint alternatives, and practical design notes in one citable reference.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM004T-I/ML

DSPIC33EV32GM004T-I/ML - 16-bit 5V 70 MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33EV32GM004T-I/ML is a 16-bit digital signal controller (DSC) from the 5V-robust dsPIC33EV GM family, delivering up to 70 MIPS performance with 32KB of Flash program memory and 4KB of SRAM in a 44-pin QFN (8x8 mm) package with exposed pad, supplied in tape-and-reel packaging for automated assembly. A digital signal controller combines the computational power of a digital signal processor (DSP) with the peripheral integration and control logic of a microcontroller (MCU). DSCs sit in the power-management and control hierarchy between general-purpose MCUs and dedicated DSPs, offering deterministic fixed-point math alongside motor-control PWM and analog peripherals, which makes them a staple in industrial, appliance, and automotive control systems. Key features include the 5V-tolerant dsPIC33EV core rated at 70 MIPS, six motor-control PWM (MCPWM) channels, three integrated operational amplifiers for current sensing, a Charge Time Measurement Unit (CTMU) for capacitive touch and time-based measurement, SENT bus peripheral support for automotive sensor interfaces, four DMA channels, and seven timers. Technically, the dsPIC33EV core executes an enhanced 16-bit instruction set with DSP engine features including a 17x17 multiplier, 40-bit accumulator, and barrel shifter, operating across a wide supply range (the family supports 1.8V/2.5V/3.3V/5V flash programming classifications; the EV class targets 4.5V to 5.5V operation). The on-chip op-amps reduce external component count in current-shunt sensing paths, and ECC-class Flash options support functional-safety-oriented designs. Typical applications include brushless DC and PMSM motor control in appliances, switched-mode power supplies and digital power, automotive sensor and touch-control units, and industrial automation nodes operating in noisy, high-vibration environments where 5V noise immunity is decisive. Design consideration: budget the exposed-pad thermal connection carefully - solder the QFN exposed pad to a ground pour to dissipate heat and lower ground impedance for the motor-control PWM switching currents. This page synthesizes distributor availability data, drop-in alternatives within the dsPIC33EV family, and practical design notes not consolidated in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM004T-I/P8

DSPIC33EV32GM004T-I/P8 - 16-bit 70MHz DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33EV32GM004T-I/P8 is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, featuring a 5V 70 MIPS dsPIC DSC core, 32KB of ECC-protected Flash program memory (11K x 24), and 4KB of RAM, housed in a 48-pin TQFP (7x7 mm) package. It operates from a single 4.5V to 5.5V supply and integrates 6 motor-control PWM channels, 3 on-chip op amps, a Charge Time Measurement Unit (CTMU), and a SENT peripheral for automotive sensor interfaces. A digital signal controller combines the computational throughput of a DSP engine with the peripheral integration and control architecture of a microcontroller. In the product hierarchy, the dsPIC33EV sits between general-purpose 16-bit MCUs and dedicated DSPs, offering single-cycle MAC and DSP instructions, barrel shifting, and hardware division alongside typical MCU peripherals such as UART, SPI, I2C, and timers. This makes DSCs the preferred choice for closed-loop real-time control systems. Key differentiating features of this part include the 5V-tolerant operating range that eliminates level shifting in industrial and automotive 5V environments, ECC Flash that detects and corrects single-bit memory errors for functional-safety (FuSa) oriented designs, and an integrated analog front end - three op amps that can be used to build signal-conditioning chains around the 12-bit ADC without external amplifiers. Architecturally, the dsPIC33EV core executes up to 70 MIPS from a phase-locked loop clocked by an internal or external source, with seven timers and four DMA channels (per Microchip family documentation) that offload data movement from the CPU during high-rate ADC sampling or PWM-triggered control loops. Typical applications include motor control (BLDC, PMSM, ACIM) using the 6-channel complementary-or-independent MC PWM, automotive and industrial sensor nodes using the SENT peripheral and CTMU for capacitive/touch or time measurement, and digital power conversion where fast DSP math plus on-chip analog shortens the control loop. Design consideration: the 48-TQFP 7x7 mm package with 0.5 mm lead pitch requires fine-pitch PCB lands and good grounding of the exposed supply structure; verify the exact 5V supply tolerance (4.5V to 5.5V per verified distributor data) before board design. This page synthesizes distributor pricing, verified drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM004T-I/PT

DSPIC33EV32GM004T-I/PT - 5V 70MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33EV32GM004T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EV family that delivers 70 MIPS performance at 5V, with 32KB (11K x 24) of ECC-protected Flash program memory and 4KB of RAM, housed in a 44-pin TQFP (10x10 mm) package. It is a Functional Safety (FuSa) supported part designed for harsh environments. A digital signal controller combines the computational architecture of a microcontroller with the DSP engine of a digital signal processor. In the power-management hierarchy of embedded systems, the dsPIC33EV sits between general-purpose MCUs and dedicated DSPs, offering a single-cycle MAC, barrel shifter, and hardware divide alongside standard MCU peripherals. This makes it especially effective for closed-loop control such as motor control and digital power conversion. Key features include the 5V-tolerant 70 MIPS dsPIC DSC core, which removes the need for dual-supply designs common with 3.3V DSPs, ECC Flash for functional-safety-relevant designs, up to 6 motor-control PWM channels, and on-chip CTMU (Charge Time Measurement Unit) for touch or time-domain measurement. Analog integration includes op-amps and a high-speed 12-bit ADC in family variants, reducing external BOM cost in sensing applications. Architecturally, the device uses an enhanced modified Harvard pipeline with DSP multiply-accumulate instructions, 4 DMA channels for low-CPU-overhead data movement, and 7 timers. Peripheral Pin Select (PPS) allows flexible remapping of digital peripherals onto RPn pins, simplifying board-level routing and layout reuse across the family. Typical applications include industrial motor drives, switched-mode power supplies and digital power, appliances operating on 5V rails in noisy environments, and automotive body and convenience subsystems leveraging the family's AEC-oriented heritage. When designing with this device, remember that the "T" suffix denotes tape-and-reel packaging and "I" denotes the -40C to +85C industrial temperature range; the extended-temperature "E" variants share the same footprint if your thermal budget demands it. This page synthesizes verified distributor data, same-family drop-in alternatives, pricing tiers, and practical design notes not found on the manufacturer product page.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM006-E/MR

DSPIC33EV32GM006-E/MR - 16-bit 5V DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33EV32GM006-E/MR is a 16-bit 5V digital signal controller (DSC) featuring a dsPIC33EV core running at up to 60 MIPS, 32KB (11K x 24) of ECC Flash program memory, and 4KB of RAM, housed in a 64-pin VQFN (9x9 mm) exposed-pad package with an extended temperature range of -40C to +125C. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and control-oriented architecture of a microcontroller. Within the power management hierarchy, the DSC sits above general-purpose MCUs and below application-specific DSPs, making it the standard choice for closed-loop motor control and power conversion where fast interrupt latency and hardware multiply-accumulate (MAC) are required. The dsPIC33EV family targets harsh 5V industrial and automotive environments. Key features include a 5V-tolerant supply rail that eliminates external level shifting in 24V industrial systems, six motor-control PWM channels for three-phase inverter drives, and three integrated operational amplifiers that buffer current-shunt signals before the 12-bit ADC, reducing external component count. The Charge Time Measurement Unit (CTMU) supports capacitive touch and precise time measurement, while the SENT interface targets automotive sensor networks. Error-correcting code (ECC) on Flash memory improves functional-safety integrity, a feature DigiKey highlights as Functional Safety (FuSa) qualification. Architecturally, the device uses a modified Harvard 16-bit core with DSP instruction extensions, 4 DMA channels, and 7 timers, enabling deterministic sampling and control-loop execution at 60 MHz instruction rates. Multiple internal bus structures keep data moves off the core, sustaining throughput in concurrent ADC/PWM control loops. Typical applications include automotive sensor and touch control units, BLDC and PMSM motor drives for appliances, and industrial power supplies operating in high-vibration, high-noise environments. The AEC-Q100 qualification and -40C to +125C grade make it suitable for under-hood and harsh-industrial deployments. Design considerations: the integrated op amps have limited bandwidth, so verify gain-bandwidth against your current-loop sampling frequency; and the 9x9 VQFN thermal pad must be well soldered for high ambient temperatures. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-26.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM006-E/PT

DSPIC33EV32GM006-E/PT - 16-bit 60 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV32GM006-E/PT is a 16-bit digital signal controller (DSC) with a 5V dsPIC33EV core running at up to 60 MIPS, 32KB (11K x 24) ECC Flash program memory, 4KB RAM, housed in a 64-pin TQFP (10x10 mm) surface-mount package. A digital signal controller combines the computational architecture of a digital signal processor with the peripherals and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, providing deterministic math acceleration, barrel shifting, and multiply-accumulate capability while retaining interrupt-driven control peripherals. This makes the dsPIC33EV family a natural fit at the heart of motor control, digital power conversion, and sensor fusion subsystems. Key differentiating features include a wide 5V operating supply (3.0V to 5.5V tolerant design per Microchip family documentation) that simplifies interfacing in noisy industrial and automotive 12V environments, ECC Flash for functional-safety oriented designs, six motor-control PWM channels, three on-chip operational amplifiers, a Charge Time Measurement Unit (CTMU) for capacitive touch and precise timing, and a SENT peripheral for automotive sensor networks. Technically, the dsPIC33EV core executes an enhanced 16-bit modified Harvard architecture with DSP instruction extensions, four DMA channels and seven timers offload the CPU from data movement and periodic tasks. The extended temperature grade (-40C to +125C ambient, denoted by the E suffix) and 5V noise immunity target harsh appliances, industrial, and automotive installations. Typical applications include BLDC and PMSM motor control for appliances, automotive body and sensor control units using SENT, and industrial digital power supplies where the 6-channel complementary PWM drives half-bridge and three-phase converters. Design consideration: the on-chip op amps can replace external signal-conditioning stages, reducing BOM cost, but verify their bandwidth against your current-shunt sampling frequency before relying on them in high-bandwidth control loops. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM006-I/PT

DSPIC33EV32GM006-I/PT - 16-Bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV32GM006-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering 70 MIPS performance from a 5V-tolerant dsPIC33EV core with 32KB (11K x 24) of FLASH program memory and 4KB of RAM, housed in a 64-pin TQFP (10x10 mm) surface-mount package. A digital signal controller combines the compute architecture of a microcontroller with DSP-class math capability in a single device. In the power-management hierarchy of embedded systems, the DSC sits above basic MCUs: it executes real-time control loops (such as field-oriented motor control) at high sampling rates while still providing general-purpose I/O, communication peripherals, and analog interfaces. The dsPIC33EV family extends this concept with a 5V operating range, making it well suited to harsh electrical environments. Key features of the DSPIC33EV32GM006 include the 16-bit 70 MIPS dsPIC DSC core with DSP instruction support, 32KB of self-programmable FLASH with ECC, 4KB of RAM, a wide operating voltage centered on 5V, and the Peripheral Pin Select (PPS) feature that allows remapping of digital peripherals onto flexible RPn/RPIn pins for maximum board-layout freedom. The -I temperature suffix specifies industrial operation from -40C to +85C. Architecturally, the device pairs an enhanced pipeline with single-cycle MAC and DSP multiply instructions, hardware divide support, and multiple interrupt vectors, allowing deterministic execution of control algorithms. Peripherals typically include multiple UART, SPI, and I2C ports, PWM modules for motor and power conversion, a watchdog timer, and in-circuit serial programming (ICSP) via any PGECx/PGEDx pin pair. Typical applications include electric power steering and other automotive subsystems, industrial motor drives and inverters, appliances, digital power supplies, and sensor signal conditioning where 5V noise immunity is valuable. Design consideration: use any PGECx/PGEDx pair for ICSP, but keep clock and data on the same numbered pair; connect all VDD and VSS pins, and place 0.1uF decoupling capacitors at each supply pin pair. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM006T-I/MR

DSPIC33EV32GM006T-I/MR - 16-bit 70 MIPS 32KB DSC | Microchip

The Microchip Technology DSPIC33EV32GM006T-I/MR is a 16-bit dsPIC33EV digital signal controller (DSC) delivering up to 70 MIPS performance with 32KB (11K x 24) of Flash program memory and 4KB of RAM, housed in a 64-pin VQFN (9x9 mm) package with exposed pad. A digital signal controller combines the compute architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP: it executes control loops and signal-processing algorithms in a single chip. The dsPIC33EV family is Microchip's 5V-tolerant DSC line, targeted at harsh-environment industrial, appliance, and automotive applications where 5V I/O interfaces remain standard. Key features of the DSPIC33EV32GM006T-I/MR include a 16-bit dsPIC DSC core clocked up to 70 MIPS, 32KB self-programming Flash, 4KB RAM, 4 DMA channels for data movement without CPU overhead, and 7 timers. The device supports Functional Safety (FuSa) documentation packages, making it suitable for safety-oriented designs. The 5V operating rating eliminates level-shifting in legacy industrial buses and sensor interfaces. Architecturally, the dsPIC33EV core uses a modified Harvard bus structure with separate program and data paths, DSP multiply-accumulate (MAC) instructions, and division support, enabling efficient execution of filters, transforms, and closed-loop control algorithms at full 70 MIPS throughput. Typical applications include motor control (BLDC, PMSM, ACIM), digital power supplies and lighting, automotive body and comfort modules, and industrial appliances that must interface directly to 5V sensors and actuators. Design consideration: at 70 MIPS the core runs from a PLL-multiplied internal oscillator; budget PCB space for a stable 3.3V core regulator supply (on-chip regulator requires a recommended external capacitor) and follow Microchip's decoupling guidelines for the 64-VQFN exposed pad. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet. Pricing shown is as of 2026-09-26.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM006T-I/PT

DSPIC33EV32GM006T-I/PT - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip DSPIC33EV32GM006T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EV family delivering 70 MIPS performance at 5V, with 32KB (11K x 24) of Flash program memory, 4KB of RAM, in a 64-pin TQFP (10x10 mm) surface-mount package. A digital signal controller combines the control peripherals of a microcontroller with the computational core of a digital signal processor. Within the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, offering deterministic real-time control loops plus math acceleration for motor control, digital power conversion, and sensor fusion. The dsPIC33EV family extends this concept to 5V operation, which is a major differentiator from 3.3V-only competitors. Key features include a 16-bit modified Harvard architecture core running at up to 70 MIPS, native 5V tolerance that eliminates level-shifting in automotive and industrial 12V-derived systems, functional-safety (FuSa) documentation support, DSP engine with 40-bit accumulators, and multiple serial interfaces (UART, SPI, I2C) plus CAN for in-vehicle networking. Technically, the dsPIC33EV core includes a barrel shifter, dual operand fetch, and hardware division support, with 4 DMA channels offloading data movement from the CPU. Seven timers plus input capture and output compare/PWM modules enable precise motor commutation and switch-mode power-supply control. The 12-bit ADC with multiple sample-and-hold inputs supports simultaneous multi-channel sampling for three-phase current sensing. Typical applications include brushless DC and PMSM motor drives, automotive sensors and touch/control units, digital power supplies (LLC, PFC), and harsh-environment industrial nodes exposed to noise and vibration, where the 5V noise margin is a decisive advantage. Design consideration: exploit the 5V core but verify ADC reference stability and decouple all VDD/VSS pin pairs; use any PGECx/PGEDx pair consistently for ICSP programming. This page synthesizes distributor pricing, drop-in family alternatives, and design guidance not consolidated in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM102-E/MM

DSPIC33EV32GM102-E/MM - 16-bit 5V DSC 32KB Flash | Microchip

The Microchip DSPIC33EV32GM102-E/MM is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, featuring a 5V-tolerant dsPIC DSC core running at up to 70 MIPS, 32KB (11K x 24) of Flash program memory, and 4KB of RAM, housed in a 28-pin QFN-S (6x6 mm, MM) surface-mount package with exposed pad and an extended operating temperature range of -40C to +125C (E suffix). A digital signal controller combines the computational architecture of a digital signal processor with the peripherals and ease of use of a microcontroller, occupying a node in the product hierarchy: DSC -> microcontroller -> embedded processor -> semiconductor. DSCs are optimized for real-time control loops such as field-oriented motor control, digital power conversion, and sensor signal processing. Key features include the 5V robust core that eliminates level-shifting in industrial and automotive 5V systems, an integrated CAN bus interface for vehicular and industrial networking, 16-bit Sigma-Delta and high-speed ADC peripherals, PWM modules for motor and power control, and functional-safety (FuSa) support documentation. The E-grade temperature rating supports harsh environments where consumer-grade parts would fail. Technically, the dsPIC33EV implements a modified Harvard architecture with DSP instruction extensions (MAC, DSP multiply-accumulate), a 16-bit W register file, and hardware looping, enabling single-cycle DSP operations at 70 MIPS. Supply voltage spans 4.5V to 5.5V nominally at 5.0V. Flash is self-programmable, supporting in-field firmware updates. Typical applications include BLDC/PMSM motor control in appliances, automotive body and powertrain subsystems (AEC-Q100 qualified family), industrial power supplies, and CAN-networked sensor nodes. Design consideration: budget decoupling capacitance on both VDD pins and place the exposed thermal pad land pattern per the datasheet to maximize ground integrity and heat dissipation. This page synthesizes verified distributor data, drop-in alternatives, and engineering design guidance beyond the manufacturer datasheet for one-stop component evaluation.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM102-E/SO

DSPIC33EV32GM102-E/SO - 16-bit 60 MIPS 5V DSC | Microchip

The Microchip DSPIC33EV32GM102-E/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering up to 60 MIPS performance from a 5V-tolerant dsPIC33 core, with 32KB (11K x 24) of Flash program memory and 4KB of RAM, housed in a 28-pin SOIC package rated for -40C to +125C operation. A digital signal controller combines the computational capability of a microcontroller with DSP-class math acceleration in a single core. Within the power-management hierarchy of embedded systems, a DSC sits above general-purpose MCUs for control-loop tasks, making the dsPIC33EV family a direct fit where sensor-rich, real-time closed-loop control must run in harsh electrical environments such as 12V and 24V industrial and automotive buses. Key features include the 5V operating range (4.5V to 5.5V), which removes level-shifting between the controller and automotive/industrial sensor interfaces, an on-chip CAN module for vehicle and factory networking, complementary PWM outputs for motor and power conversion control, and integrated analog including op amps and a 12-bit ADC that reduce external BOM cost. Technical depth comes from the enhanced dsPIC33E architecture: the -E suffix designates the extended temperature AEC-Q100 qualified variant, and the device carries Functional Safety (FuSa) support documentation for ISO 26262-style development flows. The 60 MIPS core executes DSP instructions with dual operand fetch, enabling FOC motor control and digital power algorithms on-chip. Typical applications include BLDC and PMSM motor control in appliances, automotive body and powertrain auxiliary nodes using CAN, and industrial power supplies with SENT sensor interfaces. Design consideration: place a 0.1uF ceramic decoupling capacitor at each VDD pin pair and keep the MCLR line above 4.5V at reset for reliable programming. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing referenced as of 2026-09-26.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM102-E/SP

DSPIC33EV32GM102-E/SP - 16-bit 5V DSC, CAN | Microchip

The Microchip Technology DSPIC33EV32GM102-E/SP is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, operating at up to 60 MIPS from a robust 5V supply, with 32KB (11K x 24) of Flash program memory and 4KB of RAM, housed in a 28-pin SPDIP (0.300 in, 7.62 mm) package rated for -40C to +125C (extended, AEC-Q100 qualified). A digital signal controller combines the computational core of a microcontroller with DSP-class math capability in a single device. In the power-management hierarchy, a DSC sits between general-purpose MCUs and full DSP processors: it executes deterministic control loops while performing multiply-accumulate operations needed for digital power conversion, motor control and sensor signal processing. The dsPIC33EV family extends the classic dsPIC33 architecture with a 5V-tolerant supply domain, reducing the need for level shifting and external regulators in harsh 12V/24V industrial and automotive electrical environments. Key features of this part include the 5V-rated dsPIC DSC core running at up to 60 MIPS, on-chip CAN (Controller Area Network) for automotive and industrial networking, an extended industrial-to-automotive temperature grade (-40C to +125C), and Microchip Functional Safety (FuSa) support. The 32KB Flash is self-programmable, and the 4KB RAM supports the DMA-driven data movement typical of digital power firmware. Architecturally, the dsPIC33EV core is a modified Harvard 16-bit processor with DSP instructions, integrated peripherals, and clock/pll flexibility that lets the DSC run from a low-cost crystal while multiplying up to the maximum 60 MIPS execution rate. The integrated CAN, motor-control PWM, and analog peripherals on the GM102 family variant make it a single-chip solution for inverter and node controller designs. Typical applications include BLDC/DC motor control in appliances and power tools, automotive body and powertrain sensor nodes on the CAN bus, and industrial digital power supplies (PFC, LLC) where 5V noise immunity is a design advantage. A key design consideration: the DIP-28 (SPDIP) package suits prototyping and through-hole production; for space-constrained SMT designs, the same die is available in SSOP-28 as DSPIC33EV32GM102-E/SS, but it is not footprint-identical to the /SP. This page synthesizes distributor pricing, drop-in same-family alternatives, design notes, and FAQ content not found in the manufacturer datasheet. Note: full register-level details such as exact peripheral counts and DC/AC characteristics are defined in the dsPIC33EVXXXGM00X/10X family data sheet (DS70005144H, per Microchip website); parameters not stated in the retrieved web data are marked with data placeholders in the specifications table.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM102-E/SS

DSPIC33EV32GM102-E/SS - 16-bit 60 MIPS DSC, CAN | Microchip

The Microchip DSPIC33EV32GM102-E/SS is a 16-bit digital signal controller (DSC) from the 5V-robust dsPIC33EV family, delivering up to 60 MIPS performance with 32KB (11K x 24) of Flash program memory and 4KB of RAM, housed in a 28-pin SSOP package with 0.65 mm pin pitch. It is qualified to AEC-Q100 for automotive use and rated for the extended temperature range of -40C to +125C. A digital signal controller combines the compute throughput of a DSP core with the peripheral integration and ease of use of a microcontroller, occupying the middle of the embedded-control hierarchy between general-purpose MCUs and application-specific DSPs. The dsPIC33EV family extends this concept with a 5V-tolerant architecture, which increases noise immunity in harsh electrical environments and allows direct interfacing with precision sensors without level shifting. Key features include the 5V dsPIC DSC core, dual CAN modules for automotive and industrial networking, LIN and SENT communication support for vehicle sensor buses, advanced PWM peripherals for motor control, and integrated op amps that reduce external component count. On-chip resources include 9 timers, 4 DMA channels, and Peripheral Pin Select (PPS) for flexible remapping of digital peripherals onto RPn pins. Architecturally, the device uses a 16-bit modified Harvard core with DSP multiply-accumulate instructions, allowing filtering and control-loop math to execute in single cycles. The extended-temperature (E) suffix guarantees operation up to 125C, supporting under-hood and industrial-heating locations where standard commercial parts cannot survive. Typical applications include brushless DC and PMSM motor control, automotive sensor nodes using SENT or LIN, CAN-based body and powertrain modules, appliances, and industrial power supplies. The 5V operating range and AEC-Q100 qualification make the part particularly well suited to high-noise motor-drive and solenoid-control environments. Design consideration: verify that Flash capacity (32KB) and RAM (4KB) accommodate your application with margin; larger variants in the same family (64KB/128KB/256KB Flash) share the same core and peripherals, simplifying later upgrades. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design guidance beyond what the manufacturer datasheet provides.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM102-I/MM

DSPIC33EV32GM102-I/MM - 16-bit 5V 70 MIPS DSC 32KB | Microchip

The Microchip Technology DSPIC33EV32GM102-I/MM is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, featuring a 5V dsPIC DSC core running at up to 70 MIPS, 32KB (11K x 24) of Flash program memory, and 4KB of RAM, housed in a 28-pin QFN-S (6x6 mm) surface-mount package with exposed pad. A digital signal controller combines the computational core of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). Within the power management hierarchy of embedded systems, a DSC sits between general-purpose MCUs and dedicated DSPs, offering multiply-accumulate (MAC) instructions and motor-control peripherals while retaining MCU-style flash, interrupts, and I/O. The dsPIC33EV family is Microchip's 5V-robust branch of this category, purpose-built for harsh electrical environments. Key features include the 5V-tolerant 4.5V to 5.5V supply range, which eliminates the need for a separate 3.3V rail in automotive and industrial systems; 21 general-purpose I/O pins with Peripheral Pin Select (PPS) for flexible remapping; CAN, I2C, SPI, UART/USART, LINbus, and IrDA connectivity; and peripherals including DMA channels, motor-control PWM, brown-out detect/reset, power-on reset, and a watchdog timer. The dsPIC33EV core integrates DSP engine features such as a 17-bit x 17-bit single-cycle hardware multiplier and dual 40-bit accumulators, enabling efficient execution of digital filters and field-oriented motor-control algorithms. Advanced analog integration, including on-chip op amps, SENT support, and a high-speed 12-bit ADC, reduces external component count in sensor and power-conversion front ends. Typical applications include brushless DC and PMSM motor control, CAN-networked automotive body and powertrain nodes, industrial appliances, and switched-mode power supplies. The 5V noise immunity and wide -40C to +125C operating range (I temperature grade) make this device well suited to electrically noisy environments. Design consideration: with only 32KB of Flash, budget code space carefully when adding a full CAN stack plus motor-control firmware; pin-to-pin larger-memory siblings in the same QFN-28 footprint provide an upgrade path without PCB redesign. This page synthesizes distributor pricing context, same-footprint alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33EV32GM102-I/SO

DSPIC33EV32GM102-I/SO - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV32GM102-I/SO is a 16-bit digital signal controller (DSC) with a 5V, 70 MIPS dsPIC DSC core, 32KB of Flash program memory and 4KB of RAM, housed in a 28-pin SOIC package rated from -40C to +85C. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). Within the embedded hierarchy, the dsPIC33EV sits in the 16-bit DSC family under Microchip's broader dsPIC33/PIC24 product line, targeting real-time control loops where math-intensive processing and robust analog integration are required on a single chip. Key features include operation at up to 70 MIPS from an internal PLL, a true 5V supply range that eliminates the need for level shifting in industrial and automotive environments, an on-chip CAN 2.0B module for vehicle and industrial networking, high-resolution PWM outputs for motor control and power conversion, SENT peripheral support for automotive sensor interfaces, and integrated op amps plus advanced analog features that reduce external component count. Architecturally, the device implements a modified Harvard 16-bit core with DSP instruction extensions (MAC, dual operand fetch), 9 timers, 4 DMA channels, and multiple internal bus architectures for parallel peripheral access. CMOS process technology supports the wide 5V operating range with enhanced latch-up and ESD robustness suited to harsh environments such as appliances, industrial drives, and automotive subsystems. Typical applications include BLDC and PMSM motor control, switch-mode power supplies and digital lighting, automotive body and sensor nodes using CAN or SENT, and industrial appliances requiring sensorless control algorithms. The DSP engine and high-speed PWM make it a natural fit for field-oriented control implementations. A key design consideration: at 70 MIPS the core runs from the internal FRC PLL, so designers should verify clock accuracy requirements against the internal oscillator tolerance or budget an external crystal for CAN networks. This page synthesizes distributor availability data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

الفئات الفرعية

المنتجات (39,000+)

DSPIC33EV32GM002-E/SS - 16-bit 5V DSC 32KB Flash | Microchip

DSPIC33EV32GM002-I/SP - 16-bit 70 MIPS 5V DSC 32KB Flash | Microchip

DSPIC33EV32GM002-I/SS - 16-bit 5V 70 MIPS DSC | Microchip

DSPIC33EV32GM003-E/M5 - 16-bit 5V DSC 32KB Flash 60MHz | Microchip

DSPIC33EV32GM003-I/M5 - 16-bit 70 MIPS 5V DSC | Microchip

DSPIC33EV32GM003T-I/M5 - 16-Bit 5V DSC 32KB Flash | Microchip

DSPIC33EV32GM004-E/ML - 16-bit 5V DSC 32KB Flash | Microchip

DSPIC33EV32GM004-E/P8 - 16-Bit 5V DSC 60MHz 48-TQFP | Microchip

DSPIC33EV32GM004-I/P8 - 16-bit 70 MIPS 5V DSC | Microchip

DSPIC33EV32GM004-I/PT - 16-Bit 5V 70 MIPS DSC 44-TQFP | Microchip

DSPIC33EV32GM004T-I/ML - 16-bit 5V 70 MIPS DSC 32KB Flash | Microchip

DSPIC33EV32GM004T-I/P8 - 16-bit 70MHz DSC 32KB Flash | Microchip

DSPIC33EV32GM004T-I/PT - 5V 70MIPS DSC 32KB Flash | Microchip

DSPIC33EV32GM006-E/MR - 16-bit 5V DSC 32KB Flash | Microchip

DSPIC33EV32GM006-E/PT - 16-bit 60 MIPS 5V DSC | Microchip

DSPIC33EV32GM006-I/PT - 16-Bit 70 MIPS 5V DSC | Microchip

DSPIC33EV32GM006T-I/MR - 16-bit 70 MIPS 32KB DSC | Microchip

DSPIC33EV32GM006T-I/PT - 16-bit 70 MIPS 5V DSC | Microchip

DSPIC33EV32GM102-E/MM - 16-bit 5V DSC 32KB Flash | Microchip

DSPIC33EV32GM102-E/SO - 16-bit 60 MIPS 5V DSC | Microchip

DSPIC33EV32GM102-E/SP - 16-bit 5V DSC, CAN | Microchip

DSPIC33EV32GM102-E/SS - 16-bit 60 MIPS DSC, CAN | Microchip

DSPIC33EV32GM102-I/MM - 16-bit 5V 70 MIPS DSC 32KB | Microchip

DSPIC33EV32GM102-I/SO - 16-bit 70 MIPS 5V DSC | Microchip