الدوائر المتكاملة

DSPIC33FJ06GS102AT-I/SS

DSPIC33FJ06GS102AT-I/SS - 16-bit 40MIPS DSC 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS102AT-I/SS is a 16-bit Digital Signal Controller (DSC) from the dsPIC33FJ GS family delivering up to 40 MIPs at 3.3V, with 6KB (2K x 24) of FLASH program memory, in a 28-pin SSOP surface-mount package with 5.30 mm body width, supplied in tape and reel. A Digital Signal Controller combines the computational throughput of a DSP with the peripheral set and ease of use of a microcontroller, sitting in the product hierarchy between a general-purpose MCU (such as a PIC18) and a dedicated DSP. In a digital power system, the DSC executes the control loop - for example a proportional-integral compensator running at switching frequency - while also handling housekeeping tasks like sequencing, telemetry and communication. The GS family is purpose-built for digital switch-mode power conversion. Key features include a high-speed 16-bit core with DSP engine, peripherals supporting multi-loop control topologies such as Power Factor Correction (PFC), and an architecture optimized for AC-DC converters, DC-DC converters and UPS applications, as documented on the Microchip dsPIC33FJ06GS102A product page. The 6KB FLASH with 2K x 24 word organization suits compact, deterministic control firmware, and the industrial temperature rating (-40C to +85C) covers most commercial and industrial environments. Technically, the device executes C and hand-optimized assembly via the MPLAB XC-DSC C/C++ compiler, which provides full access to DSC hardware capabilities including DSP multiply-accumulate instructions. The 40 MHz-class clock system yields 40 MIPs, sufficient for closed-loop control of converters switching at hundreds of kilohertz with single-cycle MAC throughput. Typical applications include digital AC-DC and DC-DC power supplies, power factor correction stages, uninterruptible power supplies, LED drivers and battery charging systems - anywhere a fast, deterministic control loop replaces analog compensation. When designing, budget program memory carefully: 2K x 24 words fills quickly once control loops, state machines and communication are combined, so consider the 16KB GS202 variant for headroom. This page adds value beyond the manufacturer datasheet by consolidating distributor availability, drop-in alternatives, pricing tiers and practical design notes in one citable reference. Pricing shown reflects distributor data as of 2026-09-26.

طلب عرض سعر اتصل بنا

DSPIC33FJ06GS202-E/MM

DSPIC33FJ06GS202-E/MM - 16-bit DSC 6KB Flash 28-QFN | Microchip

The Microchip Technology DSPIC33FJ06GS202-E/MM is a 16-bit digital signal controller (DSC) combining a dsPIC33F core, 6 KB of self-programming Flash memory, 1 KB of SRAM, high-speed PWM modules, comparators, and an ADC, packaged in a 28-pin QFN-S (MM) 6x6 mm surface-mount package with an extended -40C to +125C operating temperature range. A digital signal controller is a hybrid device that merges the deterministic control structure of a microcontroller with the mathematical throughput of a DSP. Within the power-management hierarchy, the dsPIC33F 'GS' family sits between general-purpose MCUs and dedicated digital-power ASICs: it is a 16-bit MCU/DSP that closes control loops in switch-mode power supplies, lighting ballasts, and battery chargers entirely in firmware. Key features of this part include the high-speed PWM peripheral purpose-built for power conversion, on-chip analog comparators for cycle-by-cycle current limiting, and an ADC that samples the power stage directly. The '-E' temperature grade (up to +125C ambient) supports mounted environments near hot power stages, and the 28-QFN footprint minimizes loop inductance for switching converters. Architecturally, the dsPIC33F core provides multiple internal buses, a barrel shifter, DSP multiply-accumulate instructions, and IEEE 1149.2-compatible JTAG boundary scan, with In-Circuit and In-Application programming supported through Flash self-write. Peripheral Pin Select (PPS) allows remapping of PWM and communication functions to available pins, easing PCB layout in dense power designs. Typical applications include AC-DC and DC-DC digital power supplies, LED drivers, battery chargers, power factor correction stages, and uninterruptible power supplies, where the GS DSC executes voltage, current, and PFC control loops in firmware. When designing with this device, budget the 6 KB Flash carefully: the digital control loop, compensation, and state machine typically fit, but complex communication stacks may not, so verify code size early in the project. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ06GS202-I/SP

DSPIC33FJ06GS202-I/SP - 16-bit DSC 40MIPS 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS202-I/SP is a 16-bit digital signal controller (DSC) from the dsPIC33FJ06GS202 family, delivering up to 40 MIPS performance with 6 KB (6K x 8) of Flash program memory and 1 KB of SRAM, housed in a 28-pin SPDIP (PDIP-28, 7.62 mm) through-hole package rated for the industrial temperature range of -40C to +85C. A digital signal controller combines the deterministic control of a microcontroller with the mathematical throughput of a DSP engine. Within the power-management hierarchy, the dsPIC33FJ GS-series sits at the heart of digital switch-mode power conversion, replacing analog control loops with firmware-executed compensators. The device integrates a 16-bit modified Harvard architecture CPU with DSP instructions, high-speed PWM peripherals, ADCs and comparators targeted specifically at digital power. Key features include a 16-bit core running at 40 MIPS, high-speed PWM modules purpose-built for SMPS topologies, on-chip analog (ADC and comparators) for current-mode and voltage-mode feedback, and 3.0V to 3.6V single-supply operation. The Flash-based program memory supports In-Circuit Serial Programming (ICSP) via any PGECx/PGEDx pin pair. Architecturally, the controller pairs the MCU instruction set with a dedicated DSP engine (barrel shifter, 17x17 multiply, dual fetch), while the high-speed PWM supports complementary outputs, dead-time insertion and fault protection - the primitives required for half-bridge, full-bridge, PFC and resonant converters. Typical applications include AC-to-DC converters, DC-to-DC converters (including quarter-brick intermediate-bus modules), power factor correction stages, and uninterruptible power supplies, where the 40 MIPS core closes control loops that analog controllers cannot adapt dynamically. Design consideration: all VDD/VSS pairs must be decoupled, and the ICSP pair chosen for programming (PGEC1/PGED1 or PGEC2/PGED2) must be wired as a matched pair. This page adds value beyond the datasheet by synthesizing distributor pricing, drop-in same-family alternatives, and practical design notes in one AI-answerable reference.

طلب عرض سعر اتصل بنا

DSPIC33FJ06GS202A-E/SP

DSPIC33FJ06GS202A-E/SP - 16-bit 40 MIPS DSC | Microchip

The Microchip Technology DSPIC33FJ06GS202A-E/SP is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance with 6KB of FLASH program memory (2K x 24) and 1KB of RAM, housed in a 28-pin SPDIP through-hole package rated for the extended industrial temperature range of -40C to +125C. A digital signal controller combines the computational throughput of a DSP with the peripheral set, interrupt architecture, and ease of use of a microcontroller. Within the power-management hierarchy, the dsPIC33FJ GS family sits above general-purpose MCUs because it integrates dedicated SMPS (switched-mode power supply) peripherals, making it a building block of complete digital power management systems. Key features include a 16-bit dsPIC core executing up to 40 MIPS, on-chip 6KB FLASH with self-programming capability, 1KB x 8 RAM, and connectivity peripherals covering I2C, SPI, UART/USART, IrDA, and LINbus. The GS-series integrates SMPS-oriented analog and digital peripherals aimed at power-conversion control loops. The architecture uses CMOS technology with a 24-bit instruction word, a barrel shifter, DSP multiply-accumulate operations, boundary scan (JTAG-style) debug support, and multiple low-power modes including idle and sleep. Wide-voltage operation at 3V to 3.6V with 5V-tolerant style input structures and on-chip oscillators (with PLL) reduce external component count. In-circuit serial programming (ICSP) and two-wire debug simplify development under the MPLAB IDE with the MPLAB XC-DSC C/C++ compiler. Typical applications include digital switched-mode power supplies (AC-DC, DC-DC), battery chargers, LED drivers, power-factor-correction stages, and general embedded control where DSP math (PID, filtering) is combined with communication links such as LIN or UART. Design consideration: keep the supply within the 3.0V to 3.6V range and place 0.1uF decoupling capacitors directly at each VDD/VSS pair; the extended -40C to +125C rating (E suffix) makes layout for thermal relief especially important in enclosed power-supply environments. This page synthesizes distributor pricing, pin-compatible drop-in alternatives within the dsPIC33FJ GS family, and practical design notes not found in a single manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ06GS202A-E/SS

DSPIC33FJ06GS202A-E/SS - 16-bit 40 MIPS SMPS DSC | Microchip

The Microchip Technology DSPIC33FJ06GS202A-E/SS is a 16-bit dsPIC33F digital signal controller (DSC) delivering 40 MIPS performance from 6 KB (2K x 24) of FLASH program memory and 1 KB of RAM, housed in a 28-pin SSOP (0.209 in, 5.30 mm width) surface-mount package with extended temperature range (-40C to +125C). A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, a DSC sits above a general-purpose MCU: it adds fast multiply-accumulate execution, deterministic interrupt latency, and dedicated power-conversion peripherals, making it the de-facto controller class for switch-mode power supplies (SMPS), digital lighting ballasts, and battery chargers. Key features of this device include the high-speed PWM module purpose-built for SMPS topologies, a 6-channel 10-bit ADC with simultaneous sampling capability for current- and voltage-loop feedback, and two 10-bit DAC channels for comparator references. Communication peripherals cover I2C, SPI, UART/USART, and LINbus, allowing the power stage to report telemetry to a host controller. Architecturally, the dsPIC33F core uses a modified Harvard pipeline with 24-bit instruction words and DSP-style multiply-accumulate instructions, so the compensation loops for voltage and current regulation execute deterministically at switching frequencies well into the hundreds of kilohertz without CPU starvation. Typical applications include AC-DC and DC-DC digital power supplies, LED drivers, battery chargers, and power-factor-correction stages, where the integrated high-speed PWM and analog comparators replace external analog control chips. Design-wise, take advantage of the A-grade errata fixes versus the original GS202 and always verify the current Microchip errata sheet before tape-out; switch-mode layouts also demand short, low-inductance PWM-to-gate-driver routing. This page synthesizes distributor inventory data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ06GS202A-I/MM

DSPIC33FJ06GS202A-I/MM - 16-bit 40 MIPS DSC 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS202A-I/MM is a 16-bit digital signal controller (DSC) delivering up to 40 MIPS execution speed with 6 KB (2K x 24) of flash program memory and 1 KB of RAM, housed in a 28-pin QFN-S (6x6 mm) exposed-pad surface-mount package. A digital signal controller combines the compute core of a microcontroller with the arithmetic acceleration of a DSP. Within the power-management hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP: it runs real-time closed-loop control firmware (compensators, state machines, sequencing logic) while executing DSP-class multiply-accumulate operations for digital power conversion. The dsPIC33FJ family from Microchip Technology is purpose-built for this role in switch-mode power supplies (SMPS). Key features include the dsPIC33F core with DSP engine and barrel shifter, high-speed PWM peripherals with advanced modulation modes, high-speed analog-to-digital conversion, and on-chip comparators - the exact peripheral set required for multi-loop digital power supplies. The device operates from a 3.3V supply across the industrial -40C to +85C temperature range (the -I suffix), with low-power modes and boundary-scan support per the Microchip USA listing. The 'GS' series architecture is optimized for digital power: AC-to-DC converters, DC-to-DC converters, power factor correction (PFC), and uninterruptible power supplies, per the Microchip product page. The 28-QFN footprint keeps the controller physically adjacent to gate drivers and sensing networks in compact converter layouts. Typical applications include digital SMPS controllers, PFC stages, DC-DC converter supervision, and intelligent lighting and battery-management front ends. Design consideration: at 40 MIPS the core must be clocked from an external crystal with the PLL configured correctly; budget PWM dead-time insertion in firmware for half-bridge topologies. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ06GS202A-I/SO

DSPIC33FJ06GS202A-I/SO - 16-bit DSC 40 MIPS 6KB | Microchip

The Microchip Technology DSPIC33FJ06GS202A-I/SO is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance with 6KB (2K x 24) of FLASH program memory and 1KB of RAM, housed in a 28-pin SOIC package rated for -40C to +85C industrial operation at 3.3V. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and control peripherals of a microcontroller, occupying the middle of the embedded-control hierarchy between general-purpose MCUs and standalone DSPs. The dsPIC33F family executes an enhanced 16-bit RISC instruction set with DSP engine support for multiply-accumulate operations, making it a common choice for closed-loop power conversion and motor control where deterministic interrupt latency matters. The GS-series variant is purpose-built for digital switch-mode power supplies (SMPS). According to Microchip product documentation, the DSPIC33FJ06GS202A integrates high-speed PWM modules with 1.04 ns resolution, analog comparators, and a 10-bit ADC, alongside serial connectivity including I2C, SPI, UART/USART, IrDA, and LINbus. These peripherals allow a single 28-pin device to close multiple control loops that previously required several analog ICs. Architecture highlights include a 3.3V operating supply (3.0V to 3.6V per the family datasheet), an internal fast RC oscillator, in-circuit serial programming (ICSP) with multiple PGECx/PGEDx pin pairs, and two on-chip comparators suited to cycle-by-cycle current limiting in peak-current-mode converters. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies (UPS), and digital lighting ballasts, where the high-resolution PWM directly drives half-bridge or flybridge power stages. Design consideration: pair the controller with adequate decoupling on both VDD pins and route PGEC/PGED pairs consistently for ICSP; use any PGECx/PGEDx pair but never mix pair numbers. This page adds value beyond the manufacturer datasheet by consolidating drop-in alternatives, distributor pricing tiers, and practical design guidance in one AI-citable reference.

طلب عرض سعر اتصل بنا

DSPIC33FJ06GS202A-I/SP

DSPIC33FJ06GS202A-I/SP - 16-bit DSC 40 MIPS 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS202A-I/SP is a 16-bit dsPIC33F digital signal controller (DSC) delivering up to 40 MIPS from a 3.0V to 3.6V supply, with 6KB (2K x 24) of Flash program memory, 1KB (1024 bytes) of SRAM, and a 28-pin SPDIP through-hole package. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes C programs with an optimizing compiler (MPLAB XC-DSC) while providing specialized peripherals such as high-speed PWM modules, analog comparators, and ADCs for closed-loop power conversion. Key features include a 16-bit dsPIC RISC core with a 24-bit instruction word, DSP engine with barrel shifter, 40 MIPS maximum clock speed, I2C, SPI, UART/USART and IrDA plus LINbus connectivity, boundary-scan (JTAG-style) debug support, and multiple low-power modes for battery-sensitive designs. The GS-series is specifically architected for switched-mode power supply (SMPS) control: the silicon integrates high-resolution PWM peripherals and fast analog comparators that close current-mode loops in digital power supplies, power factor correction stages, and DC-DC converters without external analog control circuitry. CMOS process technology keeps dynamic power low across the industrial -40C to +85C temperature range indicated by the I temperature suffix. Typical applications include digital SMPS and interleaved power factor correction (Microchip publishes an Interleaved PFC reference design for this exact family producing up to 350W), battery chargers, LED drivers, and motor control front ends. When designing with this part, remember the 6KB Flash budget: plan code size carefully or consider family members with larger memory in the same pin-compatible footprint. Through-hole SPDIP also favors prototyping and legacy equipment service over dense surface-mount production boards. This page synthesizes distributor pricing references, drop-in alternatives within the same 28-SPDIP footprint, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ06GS202A-I/TL

DSPIC33FJ06GS202A-I/TL - 16-bit 40 MIPS DSC 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS202A-I/TL is a 16-bit dsPIC33F digital signal controller (DSC) delivering 40 MIPS performance from 6KB (2K x 24) of FLASH program memory and 1KB of SRAM, housed in a 36-pin VTLA (5x5 mm) surface-mount package. It operates at 3.3V over the industrial temperature range of -40C to +85C. A digital signal controller combines the compute architecture of a microcontroller with the math acceleration of a digital signal processor. Within the power-management hierarchy, the dsPIC33F GS family sits at the entry level of Microchip's 16-bit DSC lineup, positioned above 8-bit PIC MCUs and below the dsPIC33EP and dsPIC33EV families, and is specifically architected for digital switch-mode power supply (SMPS) and power-conversion control loops. Key features include a 16-bit dsPIC RISC core running at up to 40 MIPS, high-speed PWM peripherals suited to power conversion, on-chip ADC and analog comparators for closed-loop feedback, and multiple communication interfaces: I2C, SPI, UART/USART, IrDA, and LINbus. The -I suffix denotes the industrial temperature grade, and the /TL suffix denotes the 36-terminal VTLA (HVBCC, square) package with butt-terminal form. Technically, the device executes most instructions in a single cycle, with DSP-class multiply-accumulate support for control algorithms such as interleaved power factor correction. Microchip's Interleaved PFC reference design uses this controller family with universal AC input to produce a single high-voltage DC output up to 350W, demonstrating the family's fitness for high-frequency power conversion. Typical applications include digital SMPS control, AC-DC and DC-DC converters, power factor correction stages, LED drivers, battery chargers, and motor-assisted power supplies where deterministic control loops and integrated high-speed PWM are essential. When designing with this device, budget the 6KB FLASH carefully; the small memory suits compact state-machine-style control firmware rather than large protocol stacks, and use MPLAB XC-DSC compiler optimizations to fit within the budget. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ06GS202AT-E/TL

DSPIC33FJ06GS202AT-E/TL - 16-bit DSC, 40 MIPS, SMPS PWM | Microchip

The Microchip Technology DSPIC33FJ06GS202AT-E/TL is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance with 6KB (2K x 24) of flash program memory and 1KB of RAM, housed in a 36-pad VTLA surface-mount package purpose-built for digital switch-mode power supply (SMPS) control. According to the Microchip product page, this dsPIC33FJ06GS202 family device is optimized for digital power-conversion applications including AC-DC converters, DC-DC converters, and power factor correction. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management IC hierarchy, the dsPIC33FJ06GS family replaces analog PWM controllers with a programmable platform, allowing firmware-defined control loops, adaptive compensation, and digital telemetry in switched-mode power supplies. Key features include the SMPS-dedicated PWM module with high-resolution pulse-width control, two on-chip analog comparators for fast current-limit and cycle-by-cycle protection, a 40 MIPS dsPIC33F core operating from a 3.0V to 3.6V supply, and an extended -40C to +125C (E-grade) operating temperature range. The ADC can be triggered directly by the PWM module, enabling deterministic sampling at the midpoint of the PWM period to reduce switching-noise-induced measurement error. Technically, the device integrates a modified Harvard architecture with 24-bit instruction words, hardware multiply-accumulate for PI/PID compensator execution, and flexible interrupt latency suited to time-critical control loops. The 2-channel PWM outputs and comparator stall points allow multi-loop topologies such as voltage-mode and peak-current-mode control without external analog error amplifiers. Typical applications include telecom and server AC-DC front ends with active PFC, isolated and non-isolated DC-DC bricks, uninterruptible power supplies (UPS), and LED drivers requiring precise current regulation, all listed by Microchip as target uses for this family. When designing with the DSPIC33FJ06GS202AT-E/TL, budget firmware cycle time carefully: at 40 MIPS, a double-update PWM control loop leaves limited headroom for communication stacks, so reserve spare interrupt bandwidth for housekeeping tasks. This page synthesizes distributor pricing references, same-package drop-in alternatives, and practical digital-power design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا

DSPIC33FJ06GS202AT-I/TL

DSPIC33FJ06GS202AT-I/TL - 16-bit 40 MIPS DSC, 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS202AT-I/TL is a 16-bit dsPIC33F digital signal controller delivering 40 MIPS performance, 6 KB (2K x 24) of Flash program memory, and 1024 bytes of RAM, housed in a 36-pin VTLA (5x5 mm) QFN package with exposed pad and rated for the industrial -40C to +85C temperature range. A digital signal controller (DSC) combines the control peripherals of a microcontroller with the mathematical throughput of a DSP core in a single chip. Within the power-management hierarchy, a DSC such as the dsPIC33FJ family sits at the heart of digital switch-mode power supplies (SMPS), replacing analog control loops with firmware-based loops that are more flexible, configurable, and field-updatable. Key features of this device include a modified Harvard 16-bit DSP engine with 40 MIPS throughput, on-chip Flash of 6 KB sized specifically for closed-loop power conversion firmware, and a dedicated SMPS peripheral set: high-resolution PWM modules with dead-time control, a fast analog comparator, and a high-speed 10-bit ADC with simultaneous sampling, all tailored for control-loop latency in the microsecond range. Architecturally, the dsPIC33FJ core pairs a 16-bit RISC pipeline with DSP instructions (MAC, barrel shifter) and a 24-bit instruction word. The two on-chip comparators feed directly into the PWM fault/fault-overcurrent logic, enabling cycle-by-cycle current limiting without CPU intervention - a critical safety feature in peak-current-mode power converters. Typical applications include AC-to-DC converters, DC-to-DC converters, Power Factor Correction (PFC) stages, uninterruptible power supplies (UPS), and multi-loop digital SMPS designs such as LLC half-bridge and push-pull converters, where the fast ADC and high-resolution PWM provide the timing precision these topologies demand. Design consideration: keep the ICSP (PGECx/PGEDx) trace lengths short per the Microchip datasheet, and budget the 6 KB Flash carefully - algorithmic PFC plus multiple protection handlers can approach this limit, so prefer table-driven code and compiler optimization in tight designs. This page synthesizes distributor pricing (as of 2026-09-26), drop-in alternative variants, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ06GS202T-I/SO

DSPIC33FJ06GS202T-I/SO - 16-bit DSC, 40 MIPs | Microchip

The Microchip Technology DSPIC33FJ06GS202T-I/SO is a 16-bit digital signal controller (DSC) from the dsPIC33FJ06GS202 family, delivering up to 40 MIPs of performance with 6KB (6K x 8) of Flash program memory, housed in a 28-pin SOIC package (7.50mm width) for tape-and-reel delivery. A digital signal controller combines the compute architecture of a 16-bit microcontroller with the peripheral set of a digital signal processor, making the dsPIC33F family a member of the broader digital signal controller and power management IC hierarchy. DSCs of this class are widely used where high-speed pulse-width modulation (PWM), fast analog-to-digital conversion, and deterministic interrupt latency must coexist with general-purpose control code. Key features of this GS-series device include a 16-bit dsPIC33F RISC core clocked up to 40 MIPs at 3.0V to 3.6V operation, on-chip high-speed PWM modules purpose-built for switch-mode power conversion, a fast ADC, and integrated analog comparators. The extended temperature grade (-40C to +125C, per the family operating conditions for 40 MIPs at 3.0V to 3.6V) supports industrial environments. Program memory is 6KB of Flash, suiting compact, single-purpose control loops. Architecturally, the dsPIC33F core supports DSP-class instructions and addressing modes, allowing filtering, transformation, and control algorithms to execute with predictable cycle counts. The GS-series peripheral set is optimized for digital power: phase-shifted or complementary PWM outputs, fast analog feedback via the ADC and comparators, and cycle-by-cycle current limiting capabilities needed in converters. Typical applications include high-density quarter-brick DC-DC converters for intermediate bus architectures (as demonstrated in Microchip's SMPS reference designs), AC-DC power supplies, digital lighting ballasts, battery chargers, and power-factor-correction stages. When designing with this device, budget code space carefully: 6KB Flash accommodates a focused control loop but not large communication stacks. Verify that 3.3V rail sequencing and MCLR programming access (ICSP) are preserved in the layout. This page synthesizes distributor sourcing data, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ09GS302-E/MM

DSPIC33FJ09GS302-E/MM - 16-bit 40MIPS DSC 9KB Flash | Microchip

The Microchip Technology DSPIC33FJ09GS302-E/MM is a 16-bit digital signal controller (DSC) delivering up to 40 MIPS of DSP performance with 9 KB (3K x 24) of Flash program memory and 1 KB of SRAM, housed in a 28-pin QFN-S (6x6 mm) package rated for the extended -40C to +125C temperature range. A digital signal controller combines the computational core of a microcontroller with DSP-enhanced instructions such as single-cycle MAC, barrel shifting, and dual operand fetch. Within the power-management semiconductor hierarchy, the dsPIC33F family sits between general-purpose MCUs and dedicated power-supply controllers, providing fully programmable closed-loop control for switch-mode power conversion in a single chip. Key features targeted at digital power include a high-speed PWM module with dead-time control and fault inputs, an on-chip ADC capable of sampling the power-conversion loop, and multiple analog comparators that support hardware-based overcurrent protection. The device operates from a 3.0V to 3.6V supply, making it compatible with standard 3.3V rails, and the -E/ extended-temperature suffix guarantees operation to +125C. The GS-series architecture is purpose-built for SMPS: the PWM and ADC peripherals are tightly coupled so control-loop update rates can match converter switching frequencies, enabling average-current-mode and peak-current-mode control schemes in firmware rather than in analog circuitry. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages including the Microchip interleaved PFC reference design rated up to 350W, uninterruptible power supplies (UPS), and multi-loop digital switch-mode power supplies for servers and industrial systems. Design consideration: because the QFN-S 6x6 package places its ground return in the exposed thermal pad, PCB design must ensure adequate via stitching under the pad for both thermal relief and low-inductance analog ground. This page synthesizes distributor availability, drop-in alternatives, applications, and design notes not found in the manufacturer datasheet summary.

طلب عرض سعر اتصل بنا

DSPIC33FJ09GS302-E/MX

DSPIC33FJ09GS302-E/MX - 16-bit 40 MIPS SMPS DSC | Microchip

The Microchip Technology DSPIC33FJ09GS302-E/MX is a 16-bit dsPIC33F Digital Signal Controller (DSC) delivering 40 MIPS performance with 9KB (3K x 24) of FLASH program memory, operating from a 3.3V supply in a 28-pin UQFN (6x6 mm) package with exposed pad, qualified to AEC-Q100 for automotive use (E temperature grade, -40C to +125C). A Digital Signal Controller combines the compute architecture of a microcontroller with DSP features such as hardware multiply-accumulate and dual operand fetch. DSCs sit within the broader power management hierarchy: microcontroller -> digital signal controller -> embedded processor, and the dsPIC33FJ GS family is purpose-built for digital power conversion, integrating high-speed PWM modules, analog comparators, and ADCs specifically architected for switch-mode power supply (SMPS) control loops. Key features include 40 MIPS of 16-bit RISC DSP performance, 9KB of self-programmable FLASH, and the SMPS peripheral set: high-resolution PWM with dedicated time bases suitable for multi-loop and interleaved topologies, fast analog-to-digital conversion, and on-chip comparators that close control loops without external analog circuitry. The exposed-pad UQFN package improves thermal dissipation and ground integrity for power electronics layouts. The GS-family architecture pairs the dsPIC33F 16-bit core with DSP instructions, enabling execution of PID and predictive control algorithms at cycle-accurate sampling rates. Peripherals are tightly coupled to the core through the DMA and interrupt fabric, so ADC sampling-to-PWM-update latency stays deterministic - a critical requirement in current-mode control where loop delay erodes phase margin. Typical applications include AC-to-DC converters, DC-to-DC converters, Power Factor Correction (PFC) stages, and uninterruptible power supplies (UPS). Microchip's interleaved PFC reference design, rated up to 350W from a universal input, demonstrates the family in production-grade digital power hardware. Design consideration: budget the 3.3V core supply sequencing and always decouple the exposed pad as the primary ground return; the MCLR/VPP pin also doubles as the high-voltage programming input, so never omit the external programming header. This page synthesizes verified distributor listings, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ09GS302-E/SO

DSPIC33FJ09GS302-E/SO - 16-bit 40 MIPS DSC 9KB Flash | Microchip

The Microchip Technology DSPIC33FJ09GS302-E/SO is a 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS performance with 9 KB of flash program memory and 1 KB of RAM, housed in a 28-pin SOIC package with an extended temperature range of -40C to +125C (E suffix). A Digital Signal Controller combines the compute throughput of a DSP with the peripheral set and ease of use of a microcontroller, sitting in the device hierarchy between a general-purpose 16-bit MCU and a dedicated DSP. Within power-conversion systems, the DSC forms the digital control core that sits above gate drivers and power stages, closing current and voltage control loops in real time. Key features of the dsPIC33FJ09GS302 family center on digital switch-mode power supply (SMPS) control: high-speed PWM modules with complementary outputs and dead-time control, high-speed analog-to-digital converters, and analog comparators that enable fast overcurrent protection without CPU intervention. According to Microchip, these devices explicitly support common multi-loop digital power-conversion topologies. The 40 MIPS core executes DSP-class instructions, and the peripheral architecture is optimized so PWM updates, ADC sampling triggers, and comparator trips operate with minimal software latency - critical for peak-current-mode control and cycle-by-cycle current limiting in switching converters. Typical applications include AC-to-DC converters, DC-to-DC converters, Power Factor Correction (PFC) stages, and uninterruptible power supplies (UPS). Microchip's Interleaved PFC reference design demonstrates the family producing a single high-voltage DC output up to 350 W from a universal AC input. When designing with this device, budget flash and RAM carefully: 9 KB of program memory and 1 KB of RAM demand efficient fixed-point control code, and the E-grade temperature rating should be verified against enclosure thermal rise in enclosed power supplies. This page adds engineering value beyond the datasheet: verified distributor pricing as of 2026-09-26, drop-in same-package family alternatives, application guidance, and practical design notes synthesized from multiple sources.

طلب عرض سعر اتصل بنا

DSPIC33FJ09GS302-E/SS

DSPIC33FJ09GS302-E/SS - 16-bit 40 MIPS DSC 9KB Flash | Microchip

The Microchip Technology DSPIC33FJ09GS302-E/SS is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance, 9 KB (3K x 24) of FLASH program memory and 1024 bytes of RAM, housed in a 28-pin SSOP (SS) package with 5.30 mm body width. It is purpose-built for digital switch-mode power supply (SMPS) control, with dedicated high-speed PWM, ADC and analog comparators on-chip. A digital signal controller combines the deterministic control of a microcontroller with the mathematical throughput of a DSP core. In the power-management hierarchy, the dsPIC33FJ GS family sits between general-purpose MCUs and dedicated PWM ASICs, executing multi-loop control algorithms such as voltage-mode, current-mode and power factor correction loops in firmware while offering full programmability. Key features include the 16-bit dsPIC33F core running at up to 40 MIPS, 9 KB of self-programmable FLASH, 1024 bytes of RAM, an ADC, analog comparators, and the high-speed PWM module that supports complementary outputs, dead-time control and fault shutdown - the functions SMPS designers need for AC-DC, DC-DC and PFC stages. Architecturally, the device pairs a pipelined 16-bit MCU core with DSP-class multiply-accumulate instructions and dual operand fetch, allowing control-loop code and compensator math to execute in a deterministic time budget. The GS family datasheet (Microchip document 75018) positions this device specifically for multi-loop digital power conversion. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies (UPS), LED drivers and battery chargers, where the high-speed PWM and comparators close feedback loops at switching frequencies of hundreds of kilohertz. Design consideration: budget FLASH carefully - 9 KB is sufficient for one or two control loops plus compensation, but complex multi-protocol firmware may require the larger siblings in the GS family. This page synthesizes distributor pricing, drop-in family alternatives and practical design notes not found in the manufacturer datasheet alone, with prices as of 2026-09-26.

طلب عرض سعر اتصل بنا

DSPIC33FJ09GS302-E/TL

DSPIC33FJ09GS302-E/TL - 40 MIPS SMPS DSC 9KB Flash | Microchip

The Microchip Technology DSPIC33FJ09GS302-E/TL is a 16-bit dsPIC33F Digital Signal Controller (DSC) delivering 40 MIPS performance with 9 KB (3K x 24) of Flash program memory and 1 KB (1024 bytes) of RAM, housed in a 36-pin VTLA (VFTLA, exposed pad) surface-mount package optimized for digital switch-mode power supplies. A Digital Signal Controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). In the power-management hierarchy, a DSC sits above a basic PWM timer IC: it closes multi-loop feedback digitally, replacing analog error amplifiers with firmware and an on-chip ADC. Microchip's dsPIC33FJ GS family was purpose-built for this role, pairing a 16-bit dsPIC RISC core with high-speed PWM, analog comparators, and fast ADC sampling. Key features include a 40 MIPS dsPIC core at 3.3 V, an 8-channel 10-bit ADC for voltage and current feedback, two 10-bit DACs for reference generation, multiple high-speed PWM outputs for phase-shifted and interleaved topologies, analog comparators, and standard interfaces (I2C, SPI, UART). Remappable RPn pins allow flexible peripheral routing, simplifying PCB layout in dense converter designs. Architecturally, the GS family integrates the PWM, ADC, and comparator blocks with tight inter-module triggers so current-mode loops can sample and correct within a single switching cycle. Hardware DSP multiply-accumulate instructions handle compensator math without stealing CPU cycles from the control loop, and the -E/TL grade carries an extended -40C to +125C operating range suitable for enclosed power supplies. Typical applications are AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, and uninterruptible power supplies (UPS). Microchip's interleaved PFC reference design demonstrates the family driving a universal-input, 350 W single high-voltage DC output. Design consideration: budget flash carefully - 9 KB is ample for a PFC or LLC compensator but not for bootloader-plus-protocol-stack combinations, so plan a clean partitioning of firmware modules. This page synthesizes distributor pricing, drop-in alternative analysis, and practical design guidance not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ09GS302-I/MM

DSPIC33FJ09GS302-I/MM - 16-bit 40 MIPS DSC | Microchip Technology

The Microchip Technology DSPIC33FJ09GS302-I/MM is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance, 9 KB (3K x 24) of self-programmable flash memory, and 1 KB of RAM, housed in a 28-pin QFN-S (6x6 mm) surface-mount package rated from -40C to +85C. It belongs to Microchip's dsPIC33FJ GS family purpose-built for digital switch-mode power supplies (SMPS) and digital power conversion. A digital signal controller combines the compute throughput of a digital signal processor with the peripheral set and ease of use of a microcontroller, sitting in the system hierarchy between a general-purpose MCU and a dedicated DSP. In digital power systems, the DSC executes the control loop that a discrete analog compensator would otherwise perform, enabling programmable, adaptive, and monitorable power conversion. Key features include a high-speed PWM module with advanced mode support for multi-phase converters, an onboard ADC suited to current- and voltage-sense sampling, and analog comparators for fast cycle-by-cycle protection. These peripherals directly address multi-loop control topologies found in modern power stages. Architecturally, the dsPIC33F core operates from a 3V to 3.6V supply and pairs a 16-bit modified Harvard datapath with DSP multiply-accumulate instructions, allowing single-cycle MAC operations in the control-loop inner loop. The flash-based program memory supports in-circuit self-programming, and the device is supported by Microchip development tools such as MPLAB X IDE and MPLAB ICD programmers. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies (UPS), and lighting ballasts - all per the manufacturer's stated target markets for this family. Designers should budget flash and RAM carefully: 9 KB of program space and 1 KB of RAM are sufficient for tightly coded control loops but leave little margin for protocol stacks, so keep code footprint lean. This page adds value beyond the manufacturer datasheet by consolidating distributor pricing, drop-in family alternatives, application guidance, and design notes in one verifiable reference.

طلب عرض سعر اتصل بنا

DSPIC33FJ09GS302-I/SO

DSPIC33FJ09GS302-I/SO - 16-bit 40 MIPS DSC for SMPS | Microchip

The Microchip Technology DSPIC33FJ09GS302-I/SO is a 16-bit digital signal controller (DSC) from the dsPIC33F SMPS family, delivering up to 40 MIPS performance with 9 KB (3K x 24) of flash program memory and 1024 bytes of RAM, housed in a 28-pin SOIC (7.50 mm width) package. A digital signal controller combines the computational throughput of a DSP with the peripheral set and ease of use of a microcontroller. In the power-management hierarchy, a DSC sits above a standard MCU for control-loop tasks: it executes the proportional-integral compensation loops, timing and supervisory logic required in digitally controlled switch-mode power supplies. The dsPIC33FJ09GS302 belongs to Microchip's SMPS-oriented dsPIC33FJ GS family, alongside the flash-smaller dsPIC33FJ06GS101/102/201A/202A parts. Key features include a modified Harvard 16-bit DSP core with DSP instruction support, high-speed PWM peripherals purpose-built for power conversion, integrated analog (ADC and comparators per Microchip product data), and standard communication interfaces I2C, SPI and UART on 21 I/O pins. These peripherals allow multi-loop digital control of converters without extensive external circuitry. Architecturally, the core executes up to 40 million instructions per second from a 3.3 V supply (per distributor data), with deterministic interrupt latency suited to fast current-mode control loops. The dedicated PWM module supports complementary outputs and dead-time control typical of half-bridge and interleaved topologies. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies and other digital power-conversion systems, as stated by Microchip. The 28-SOIC package suits compact industrial power boards. When designing with this device, budget code space carefully: 9 KB of instruction flash is adequate for single-converter control loops but limited for combined PFC plus LLC firmware. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ09GS302-I/SP

DSPIC33FJ09GS302-I/SP - 16-bit DSC 40MIPS SMPS DSC | Microchip

The Microchip Technology DSPIC33FJ09GS302-I/SP is a 16-bit digital signal controller (DSC) delivering 40 MIPS from a 9 KB flash program memory and 1 KB of RAM, operating from a 3.0 V to 3.6 V supply in a 28-pin SPDIP package rated from -40C to +85C. A digital signal controller combines the computational power of a DSP engine with the control peripherals and ease of use of a microcontroller, sitting between an MCU and a dedicated DSP in the embedded control hierarchy. DSCs are the preferred choice for closed-loop power conversion, where fast control loops and specialized PWM hardware must coexist with general-purpose firmware. Key features of the GS302 include high-speed PWM modules purpose-built for switch-mode power supplies, an on-chip ADC for current and voltage sensing, integrated analog comparators, and DSP engine instructions including a barrel shifter and multiple internal bus architectures, as described by Microchip USA. The 24-bit wide flash program memory and boundary-scan support simplify development and production programming. Technically, the dsPIC33FJ09GS302 belongs to Microchip's SMPS-focused dsPIC33FJ GS family. Its architecture couples a 16-bit RISC core running at up to 40 MIPS with dedicated power-conversion peripherals, so control loops for voltage-mode or current-mode regulation can execute deterministically at switching frequencies common in AC/DC converters and PFC stages. Typical applications include AC to DC converters, DC to DC converters, Power Factor Correction (PFC), and uninterruptible power supplies (UPS), alongside battery chargers, LED drivers, and digital lighting ballasts, where multi-loop SMPS control is the core requirement. A key design consideration: the 3.0 V to 3.6 V supply window means the controller is powered by a regulated 3.3 V rail; place local decoupling close to both VDD pins and route sensitive analog inputs away from PWM switching nodes to protect ADC accuracy. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ09GS302-I/SS

DSPIC33FJ09GS302-I/SS - 16-bit DSC, 40 MIPS, 9KB Flash | Microchip

The Microchip Technology DSPIC33FJ09GS302-I/SS is a 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS from its dsPIC33F RISC core, with 9 KB of Flash program memory and 1 KB of RAM, operating at 3.3V in a 28-pin SSOP surface-mount package. A Digital Signal Controller combines the compute power of a 16-bit MCU with DSP engine features such as hardware multiply-accumulate and dual operand fetch. In the power-management hierarchy, the GS-series dsPIC33F DSCs sit at the intersection of general-purpose microcontrollers and dedicated SMPS control ICs, executing closed-loop digital power algorithms in firmware instead of fixed analog control loops. Key differentiating features include a high-speed PWM module purpose-built for switch-mode power supplies, an on-chip high-speed 10-bit ADC capable of simultaneous sampling tied directly to the PWM triggers, and multiple analog comparators enabling cycle-by-cycle current limiting without CPU intervention. The device is explicitly designed for common and multi-loop digital SMPS topologies. Architecturally, the dsPIC33FJ09GS302 belongs to the GS-series family (documented alongside the dsPIC33FJ06GS001/101A/102A/202A in the Microchip family data sheet DS-75018B) with a modified Harvard RISC core, 5V-tolerant I/O pins on selected pins, in-circuit and in-application programming, and JTAG-compatible boundary scan support per the family documentation. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC), and uninterruptible power supplies (UPS), plus digitally controlled lighting and battery charging. An interleaved PFC reference design from Microchip demonstrates universal input producing up to 350W of DC output. When designing with this device, budget the 9 KB Flash carefully: full closed-loop PFC plus housekeeping firmware typically consumes most of it, so choose the larger GS202A family member if code growth is expected. Decouple VDD/AVDD and use the dedicated VCAP pin per datasheet guidance. This page synthesizes distributor pricing, drop-in same-footprint alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ09GS302T-E/MX

DSPIC33FJ09GS302T-E/MX - 16-bit DSC, 9KB Flash, QFN-28 | Microchip

The Microchip Technology DSPIC33FJ09GS302T-E/MX is a 16-bit dsPIC33FJ digital signal controller (DSC) with 9KB of FLASH program memory, 1KB of RAM, and a 3V to 3.6V operating supply, housed in a 28-pin QFN-EP (6x6 mm) surface-mount package rated from -40C to +125C. A digital signal controller combines the computational throughput of a 16-bit MCU with DSP-grade math acceleration on a single die. Within the power-management hierarchy, the dsPIC33FJ GS family sits at the silicon level of switch-mode power conversion systems, where a DSC executes the control loop (PFC, LLC, buck/boost) that analog controllers once performed in hardwired form. Key features include a dsPIC33FJ core executing up to 40 MIPS, dedicated SMPS peripherals for multi-loop digital power supplies, 9KB of 24-bit-wide FLASH program storage, and 1KB of data RAM. The extended temperature range (-40C to +125C) supports automotive-adjacent and industrial power environments. Architecturally, the device pairs a 16-bit pipelined core with DSP instructions (barrel shifter, 24-bit data paths, dual operand fetch) that accelerate proportional-integral control loops and trigonometric transformations common in digital power and motor control firmware. Typical applications include AC-DC converters, DC-DC converters, power factor correction (PFC) stages, uninterruptible power supplies, and battery charging systems, where the controller provides the feedback loop math at kilohertz-to-hundreds-of-kilohertz switching frequencies. Design consideration: the 3.0V to 3.6V supply window is strict - provide a clean 3.3V LDO or buck-derived rail with local 0.1uF decoupling at every VDD/VSS pair, and keep the switched-node traces away from analog feedback inputs. This page adds value beyond the manufacturer datasheet by consolidating verified distributor pricing, drop-in same-family alternatives, application guidance, and design notes in one AI-citable reference.

طلب عرض سعر اتصل بنا

DSPIC33FJ09GS302T-E/SO

DSPIC33FJ09GS302T-E/SO - 16-bit 40 MIPs DSC 9KB Flash | Microchip

The Microchip Technology DSPIC33FJ09GS302T-E/SO is a 16-bit digital signal controller (DSC) from the dsPIC33F family delivering 40 MIPS performance with 9KB (3K x 24) of FLASH program memory and 1K x 8 of RAM, housed in a 28-pin SOIC package. This AEC-Q100 qualified automotive-grade part targets digital power conversion. A digital signal controller combines the computational throughput of a DSP core with the peripheral integration and ease of use of a microcontroller. In the power-management hierarchy, a DSC sits above basic MCUs because it executes tight control loops - such as Proportional-Integral-Derivative (PID) loops in switch-mode power supplies - at sampling rates that general-purpose MCUs cannot sustain. Key features of the DSPIC33FJ09GS302 include a 40 MIPS dsPIC33F core, on-chip FLASH of 9KB organized as 3K x 24-bit instruction words, and dedicated peripherals supporting common multi-loop digital switch-mode power supply (SMPS) topologies. Per Microchip product documentation, the device family specifically supports AC-to-DC converters, DC-to-DC converters, Power Factor Correction (PFC), and uninterruptible power supply applications. The GS-series architecture pairs the 16-bit CPU with high-speed PWM and analog peripherals that close current and voltage loops in hardware-friendly fashion, reducing CPU overhead in inner control loops. The extended-temperature (-40C to +125C per the E temp grade) and AEC-Q100 qualification make the part suitable for automotive and harsh-environment power electronics. Typical applications include interleaved Power Factor Correction stages (Microchip publishes an interleaved PFC reference design producing up to 350W from universal input), digital AC-DC and DC-DC converters, UPS inverters, and automotive onboard chargers. Design consideration: use the Tape & Reel format (T suffix) for automated assembly; the minimum order quantity on Tape & Reel is 1,600 units at $2.68750 each as of 2026-09-26 per DigiKey. This page adds value beyond the datasheet by consolidating distributor pricing, drop-in family alternatives, comparison tables, and practical design notes in one place for procurement and engineering teams.

طلب عرض سعر اتصل بنا

DSPIC33FJ09GS302T-I/MM

DSPIC33FJ09GS302T-I/MM - 16-bit 40 MIPS DSC 9KB Flash | Microchip

The Microchip Technology DSPIC33FJ09GS302T-I/MM is a 16-bit dsPIC33F digital signal controller (DSC) delivering 40 MIPS performance with 9KB (3K x 24) of FLASH program memory and 1KB of RAM, housed in a 28-pin QFN-S 6x6 mm package for surface-mount assembly. A digital signal controller combines the computational strengths of a microcontroller (MCU) with the math acceleration of a digital signal processor (DSP) in a single core. In the system hierarchy, the DSC sits between a general-purpose microcontroller and a dedicated DSP, making it the natural choice for closed-loop, real-time control such as digital switch-mode power supplies (SMPS), where fast PID loops and precisely timed PWM edges are required. Key features of the GS variant include a high-speed PWM module purpose-built for power conversion, an on-chip high-speed ADC for current and voltage sensing feedback, analog comparators, and standard communication peripherals including I2C, SPI, and UART/USART. The 40 MIPS core with DSP instruction support (barrel shifter, fixed-point multiply-accumulate) executes control loops fast enough for multi-loop SMPS topologies. Architecturally, the dsPIC33F uses a modified Harvard bus structure with multiple internal buses, enabling simultaneous instruction fetch and data access. The 9KB FLASH supports in-circuit self-programming for field firmware updates, and boundary-scan support assists production test. Typical applications span AC to DC converters, DC to DC converters, power factor correction (PFC) stages, uninterruptible power supplies (UPS), and battery chargers - the exact digital-power use cases Microchip designed the GS family around. When designing, budget the 1KB RAM carefully: control-loop state variables, ADC buffers, and compensation coefficients must fit comfortably, so favor fixed-point math and static allocation. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا

الفئات الفرعية

المنتجات (39,000+)

DSPIC33FJ06GS102AT-I/SS - 16-bit 40MIPS DSC 6KB Flash | Microchip

DSPIC33FJ06GS202-E/MM - 16-bit DSC 6KB Flash 28-QFN | Microchip

DSPIC33FJ06GS202-I/SP - 16-bit DSC 40MIPS 6KB Flash | Microchip

DSPIC33FJ06GS202A-E/SP - 16-bit 40 MIPS DSC | Microchip

DSPIC33FJ06GS202A-E/SS - 16-bit 40 MIPS SMPS DSC | Microchip

DSPIC33FJ06GS202A-I/MM - 16-bit 40 MIPS DSC 6KB Flash | Microchip

DSPIC33FJ06GS202A-I/SO - 16-bit DSC 40 MIPS 6KB | Microchip

DSPIC33FJ06GS202A-I/SP - 16-bit DSC 40 MIPS 6KB Flash | Microchip

DSPIC33FJ06GS202A-I/TL - 16-bit 40 MIPS DSC 6KB Flash | Microchip

DSPIC33FJ06GS202AT-E/TL - 16-bit DSC, 40 MIPS, SMPS PWM | Microchip

DSPIC33FJ06GS202AT-I/TL - 16-bit 40 MIPS DSC, 6KB Flash | Microchip

DSPIC33FJ06GS202T-I/SO - 16-bit DSC, 40 MIPs | Microchip

DSPIC33FJ09GS302-E/MM - 16-bit 40MIPS DSC 9KB Flash | Microchip

DSPIC33FJ09GS302-E/MX - 16-bit 40 MIPS SMPS DSC | Microchip

DSPIC33FJ09GS302-E/SO - 16-bit 40 MIPS DSC 9KB Flash | Microchip

DSPIC33FJ09GS302-E/SS - 16-bit 40 MIPS DSC 9KB Flash | Microchip

DSPIC33FJ09GS302-E/TL - 40 MIPS SMPS DSC 9KB Flash | Microchip

DSPIC33FJ09GS302-I/MM - 16-bit 40 MIPS DSC | Microchip Technology

DSPIC33FJ09GS302-I/SO - 16-bit 40 MIPS DSC for SMPS | Microchip

DSPIC33FJ09GS302-I/SP - 16-bit DSC 40MIPS SMPS DSC | Microchip

DSPIC33FJ09GS302-I/SS - 16-bit DSC, 40 MIPS, 9KB Flash | Microchip

DSPIC33FJ09GS302T-E/MX - 16-bit DSC, 9KB Flash, QFN-28 | Microchip

DSPIC33FJ09GS302T-E/SO - 16-bit 40 MIPs DSC 9KB Flash | Microchip

DSPIC33FJ09GS302T-I/MM - 16-bit 40 MIPS DSC 9KB Flash | Microchip