الدوائر المتكاملة

DSPIC33FJ256GP710A-H/PT

DSPIC33FJ256GP710A-H/PT - 16-bit 40 MIPs DSC 256KB | Microchip

The Microchip Technology DSPIC33FJ256GP710A-H/PT is a 16-bit dsPIC33F general purpose Digital Signal Controller (DSC) delivering 40 MIPs performance with 256KB (256K x 8) FLASH program memory, 30KB of RAM, and a 3.3V supply, housed in a 100-pin TQFP (12x12 mm) package. A Digital Signal Controller combines the control peripherals of a microcontroller with the multiply-accumulate engine of a DSP. Within the power-management hierarchy, the dsPIC33F family sits between standard MCUs and dedicated DSPs: it is a 16-bit microcontroller (PIC24 architecture) with DSP instructions, making it a single-chip solution for motor control and digital power conversion. Key features include a 16-bit RISC dsPIC33F core running at 40 MIPs, 256KB self-programmable FLASH with ECC, 30KB SRAM, and rich connectivity: CANbus, I2C, IrDA, LINbus, SPI, and UART/USART. Analog peripherals and multiple timers plus PWM modules enable closed-loop digital control without external DSP support. Technical depth: the dsPIC33F core executes most instructions in one cycle and includes a 17-bit x 17-bit single-cycle hardware multiplier, dual 40-bit accumulators, and DSP addressing modes. Seamless migration paths exist to PIC24F, PIC24H MCUs and dsPIC30F DSCs in similar packages. The -H/PT variant is specified over an automotive-oriented extended temperature range with 3.3V operation. Typical applications include automotive electronic control units, digital power supplies, industrial motor drives, sensor fusion nodes, and communication gateways using the on-chip CAN module. Design consideration: only matched PGECx/PGEDx pin pairs may be used for ICSP programming (e.g., PGEC2 with PGED2), and multiple voltage-rail domains require attention during in-circuit debugging. This page adds value beyond the datasheet by synthesizing distributor pricing, drop-in alternatives, design notes, and AEO-optimized Q&A in one structured reference.

طلب عرض سعر اتصل بنا

DSPIC33FJ256GP710A-I/PF

DSPIC33FJ256GP710A-I/PF - 16-bit 40 MIPS DSC 256KB Flash TQFP-100 | Microchip

The Microchip Technology DSPIC33FJ256GP710A-I/PF is a 16-bit general-purpose Digital Signal Controller (DSC) delivering up to 40 MIPS from its dsPIC33F core, with 256 KB of Flash program memory and 30 KB of SRAM, housed in a 100-pin TQFP (PF, 14x14 mm) surface-mount package with an industrial -40C to +85C operating range. A Digital Signal Controller combines the deterministic interrupt architecture and peripheral set of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. In the embedded-systems hierarchy, the DSC sits between a general-purpose MCU (such as a PIC18) and a dedicated DSP, making it a natural fit for motor control loops, digital power supplies, and sensor-fusion applications that need both control flow and real-time math in a single chip. Key features include the 16-bit modified Harvard core with two 40-bit accumulators and single-cycle MAC, 256 KB (256K x 8) self-programmable Flash with ECC-style write protection, up to 85 general-purpose I/O pins, and rich connectivity: CAN 2.0B, two UART modules, two I2C ports, two SPI ports, and a DCI codec interface. The analog subsystem provides a 10-bit, 1.1 Msps ADC with up to 32 input channels plus multiple analog comparators. Architecturally, the 'A' revision of the dsPIC33FJ256GP710 family refines the original die for improved manufacturing and provides seamless migration paths to PIC24H MCUs and other dsPIC33F devices in the same footprint. Peripherals are clocked from an on-chip PLL fed by an external crystal or the internal 7.37 MHz FRC oscillator with a fail-safe clock monitor and brown-out reset for safety-critical designs. Typical applications include BLDC and PMSM motor control, digital power conversion (LLC, PFC), industrial sensing, automotive body controllers (when using the -H grade), and embedded control panels requiring CAN bus networking. Design consideration: the 100-pin TQFP requires careful decoupling of all VDD/VSS pairs and a solid ground plane; Flash self-programming during ICSP requires VDD within 3.0 V to 3.6 V to stay in spec. This page adds value beyond the manufacturer datasheet by synthesizing distributor pricing, drop-in same-footprint alternatives across the dsPIC33FJ family, and practical design notes for supply-chain-resilient BOM planning.

طلب عرض سعر اتصل بنا

DSPIC33FJ256GP710A-I/PT

DSPIC33FJ256GP710A-I/PT - 16-bit 40MIPS 256KB DSC | Microchip

The Microchip Technology DSPIC33FJ256GP710A-I/PT is a 16-bit general purpose digital signal controller (DSC) delivering up to 40 MIPS from a 256 KB flash memory and 30 KB SRAM, housed in a 100-pin TQFP (12x12 mm) package rated for -40C to +85C industrial operation. A digital signal controller combines the computing architecture of a microcontroller with the DSP engine of a digital signal processor. Within the power management hierarchy of embedded systems, a DSC such as the dsPIC33F family sits between general-purpose MCUs and dedicated DSPs: it executes digital filter algorithms and high-speed precision digital control loops with single-cycle MAC and 40-bit accumulators, while retaining the peripherals, interrupts, and flash self-programming of a modern MCU. Microchip's dsPIC33FJXXXGPX06A/X08A/X10A family is explicitly designed for applications that need to perform under pressure. Key features include 256 KB of on-chip flash with ECC-style self-programming support, 30 KB of SRAM, up to 53 general-purpose I/O pins, and rich communication peripherals including CAN, I2C, SPI, and UART. The GP (general purpose) variant adds a high-speed 10/12-bit ADC and the DCI (Data Converter Interface) for codec connection, making it a strong fit for audio and precision sensing signal chains. Architecturally, the dsPIC33F core uses a modified Harvard pipeline with hardware loop support, 16 x 16 working register arrays, DSP multiply-accumulate, and modulo/bit-reversed addressing for FFTs. The A-suffix die is Microchip's enhanced revision of the original dsPIC33FJ256GP710 with improved analog and timing specifications. Typical applications include motor control front-ends, digital power supplies, audio processing and codec interfaces, industrial sensing, and general embedded control requiring DSP-class math. Migration within the dsPIC33F family is seamless, and the Explorer 16/32 Development Board supports this device through a 100-pin PIM for rapid prototyping. Design consideration: the device is a 3.3 V-supply part, so level shifting is required for 5 V logic, and ICSP programming must use matched PGECx/PGEDx pin pairs per the programming specification. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in a single manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ256GP710AT-I/PF

DSPIC33FJ256GP710AT-I/PF - 16-Bit 40MIPS 256KB Flash DSC | Microchip

The Microchip Technology DSPIC33FJ256GP710AT-I/PF is a high-performance 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS from its dsPIC33F core, with 256KB of Flash program memory, housed in a 100-pin TQFP (14x14 mm, PF) package rated for industrial temperatures (-40C to +85C) at 3.3V operation. A Digital Signal Controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, a DSC sits between general-purpose MCUs and dedicated DSPs, making it the preferred choice when an application needs both real-time control loops and math-intensive signal processing in a single chip. The dsPIC33F family belongs to Microchip's 16-bit controller portfolio and offers seamless migration to PIC24F, PIC24H MCUs and dsPIC30F DSCs in similar packages. Key features of this device include a 16-bit modified Harvard architecture with DSP engine supporting single-cycle MAC and 40-bit accumulators, 256KB (256K x 8) of self-programmable Flash and substantial SRAM for buffering, and operation up to 40 MIPS at 3.3V. The AT suffix denotes the extended automotive/industrial temperature grade, and the I suffix confirms industrial operating range. Technical depth: the device integrates multiple timers, input capture/output compare channels, motor-control PWM, multi-channel 10/12-bit ADCs, UART, SPI and I2C interfaces, plus dual PGECx/PGEDx pairs for in-circuit serial programming (ICSP). Note that programming pairs must be used as matched sets - if PGEC2 carries ICSPCLK, ICSPDAT must connect to PGED2, as documented in Microchip programming guides. Typical applications include motor control (BLDC/PMSM FOC), digital power supplies and inverters, audio and speech processing, sensor-fusion and industrial automation nodes where deterministic 16-bit control plus DSP math is required. Design consideration: budget power and clock architecture carefully - a 40 MHz-class core needs clean 3.3V decoupling at every VDD pin and careful crystal/PLL layout for stable operation. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ256GP710AT-I/PT

DSPIC33FJ256GP710AT-I/PT - 16-bit DSC 40MIPS 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256GP710AT-I/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC33FJ256GP710A family delivering up to 40 MIPS performance, 256KB of Flash program memory, and 30KB of RAM, housed in a 100-pin TQFP (12x12 mm) package rated for industrial temperatures from -40C to +85C at 3.3V operation. A Digital Signal Controller combines the compute architecture of a microcontroller with DSP capabilities such as single-cycle MAC multiply-accumulate and hardware divide support. Within the power-management hierarchy of embedded processors, the dsPIC33F sits between general-purpose 16-bit MCUs (like the PIC24H, with which it is pin compatible) and dedicated DSPs, making it a middle path for real-time control plus signal processing. The dsPIC33F family shares a high degree of compatibility with the dsPIC30F family, allowing migration between device generations as system requirements evolve. Key features include the 16-bit dsPIC core clocked at 40 MHz for 40 MIPS throughput, rich connectivity with CAN, I2C, SPI, and UART modules, 53 general-purpose I/O pins, and In-Circuit Serial Programming (ICSP) via PGECx/PGEDx pin pairs. The device is supported by the MPLAB XC-DSC C/C++ optimizing compiler and MPLAB Snap debugger. Architecture highlights: the modified Harvard pipeline executes most instructions in a single cycle, while hardware DSP multiply-accumulate instructions accelerate filtering, FFT, and control-loop math without software libraries. Dual-source Flash variants (the AT suffix denotes the A-version silicon with tape-and-reel ordering) simplify supply continuity. Typical applications include digital power supplies, motor control and PFC stages, industrial automation nodes with CAN networking, and audio or sensor signal-processing pipelines where 40 MIPS and on-chip DSP math remove the need for a second processor. Design consideration: pair multiple decoupling capacitors on the 3.3V rails and route PGEC/PGED pairs carefully for debug access; only paired PGECx/PGEDx pins may be used together for ICSP. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ256GP710T-I/PT

DSPIC33FJ256GP710T-I/PT - 16-bit 40 MIPS DSC 256KB Flash | Microchip

The Microchip DSPIC33FJ256GP710T-I/PT is a 16-bit general-purpose Digital Signal Controller (DSC) delivering 40 MIPS at 40 MHz, with 256 KB of Flash program memory and 30 KB of SRAM, housed in a 100-pin TQFP (12x12 mm) package. It operates from a 3.0 V to 3.6 V supply and over an industrial temperature range of -40C to +85C. A Digital Signal Controller combines the compute architecture of a microcontroller with the math throughput of a DSP. Within the power-management hierarchy of embedded semiconductors, the dsPIC33F family sits between general-purpose MCUs (such as PIC24) and dedicated DSPs, integrating a DSP engine with multiply-accumulate (MAC) instructions, high-speed ADC, PWM, and comparators on a single chip. Key features include the 16-bit modified Harvard architecture with 16 W x 16-bit multiply and 32/16-bit divide support, 85 general-purpose I/O, 35 I/O ports per digchips listing data, up to four high-speed comparators with direct ADC connection, and seamless migration options to PIC24F, PIC24H MCUs and dsPIC30F DSCs in similar packages per the Microchip product page. Flash program memory is 256 KB (256K x 8), SRAM is 30 KB (30720 bytes per Mouser listing), and the device is supplied in Tape and Reel packaging (suffix T). Technically, the dsPIC33F core runs its instruction and clock system at 40 MHz for 40 MIPS throughput, supported by an on-chip oscillator system and a rich interrupt architecture suited to deterministic real-time control loops. Peripherals typically include UART, SPI, I2C, ECAN, and a high-speed 10/12-bit ADC, enabling closed-loop control with sampling and computation in a single cycle-accurate pipeline. Typical applications include digital power supplies, motor control inverters, sensor signal conditioning and industrial automation nodes, all of which benefit from the combination of DSP math throughput and MCU peripheral integration. The general-purpose (GP) variant is preferred where broad analog and communication peripherals are needed rather than the motor-control (MC) focused PWM sets. A key design consideration: the device supports multiple PGECx/PGEDx pin pairs for ICSP programming, but each pair must be used as a matched pair - if PGEC2 carries ICSPCLK, ICSPDAT must connect to PGED2, as documented by Microchip development resources. This page synthesizes distributor listings, drop-in family alternatives, and design guidance not consolidated in the manufacturer datasheet alone. Prices shown are estimated as of 2026-09-27 and should be confirmed at checkout.

طلب عرض سعر اتصل بنا

DSPIC33FJ256MC510-I/PT

DSPIC33FJ256MC510-I/PT - 16-Bit DSC 40 MIPS 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256MC510-I/PT is a 16-bit dsPIC33F digital signal controller (DSC) delivering 40 MIPS performance with 256KB (256K x 8) of FLASH program memory and 30KB of RAM, housed in a 100-pin TQFP (12x12 mm) package rated for -40C to +85C operation. A digital signal controller combines the deterministic control of a microcontroller with the mathematical throughput of a DSP on a single die. In the semiconductor hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP: it executes microcontroller-style C code and interrupt handling while also providing hardware MAC, divide, and barrel-shift instructions for control-loop mathematics. The dsPIC33F family belongs to Microchip's broader 16-bit architecture, with seamless migration paths to PIC24 MCUs and dsPIC30F DSCs in similar packages. Key features include the modified Harvard 16-bit core with DSP engine, single-cycle MAC, 40 MIPS at 3.3V operation, motor-control specific peripherals (advanced PWM with dead-time insertion and ADC with simultaneous sampling), plus UART, SPI, I2C, ECAN, and multiple 16-bit timers. Industrial temperature qualification (-40C to +85C, suffix -I) suits factory-floor designs. Architecturally, the dsPIC33FJ256MC510 pairs its 256KB self-programming FLASH with 30KB SRAM and a rich interrupt vector table. The MC (Motor Control) variant adds complementary-output PWM channels and fast ADC conversion rates essential for field-oriented motor control and digital power conversion. Typical applications include brushless DC and PMSM motor drives, digital power supplies (PFC, LLC), industrial automation nodes, and sensor signal processing requiring DSP-grade math. Design consideration: all VDD/VSS pairs must be connected, and PGECx/PGEDx pairs must be used as matched pairs for In-Circuit Serial Programming. This page synthesizes drop-in alternatives, cross-reference options, pricing context, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ256MC510A-E/PT

DSPIC33FJ256MC510A-E/PT - 16-bit DSC 40MIPS 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256MC510A-E/PT is a 16-bit Digital Signal Controller (DSC) delivering 40 MIPS performance with 256 KB of Flash memory, integrated CAN 2.0B, and extended temperature operation from -40C to +125C in a 100-pin TQFP (12x12 mm) surface-mount package. A Digital Signal Controller combines the compute architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy, the dsPIC33F family sits alongside 16-bit MCUs such as the PIC24, offering single-cycle MAC, DSP multiply/divide, and barrel shifter instructions for real-time control loops. The dsPIC33FJ256MC510A belongs to the Motor Control (MC) subfamily, purpose-built for electromagnetic and power conversion workloads. Key features include 256 KB of self-programmable Flash, 40 MIPS at 3.3 V, dual CAN 2.0B modules, motor-control PWM peripherals, a 10-bit high-speed ADC, and AEC-Q100 qualification for automotive environments. The -E suffix denotes extended industrial/automotive temperature grading. The dsPIC33F core uses a modified Harvard architecture with a 16-bit data path and pipelined instruction execution, enabling deterministic interrupt latency essential for field-oriented control (FOC) and sensorless BLDC algorithms. Flash self-programming supports field firmware updates, and the peripheral ecosystem includes UART, SPI, and I2C for connectivity. Typical applications include brushless DC (BLDC) motor drives, single- and 3-phase induction motor control, switched reluctance motor systems, UPS and solar inverters, and automotive body electronics with CAN networking. The integrated motor-control PWM and fast ADC make it a strong fit for digital power supplies. Designers should budget decoupling on every VDD/VSS pair, plan the 100-pin footprint for PWM-to-gate-driver routing, and respect the 3.6 V absolute maximum on digital pins. This page synthesizes distributor pricing, drop-in alternatives, design notes, and FAQ content not found in a single manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ256MC510AT-I/PF

DSPIC33FJ256MC510AT-I/PF - 16-bit 40 MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256MC510AT-I/PF is a 16-bit digital signal controller (DSC) delivering up to 40 MIPS performance with 256KB of Flash program memory, 16KB of RAM, and a 3V to 3.6V supply range, housed in a 100-lead TQFP (14x14 mm, 0.5 mm pitch) package. A digital signal controller combines the computational architecture of a microcontroller (MCU) with the numeric acceleration of a digital signal processor (DSP). In the product hierarchy, the dsPIC33F family sits between general-purpose 16-bit PIC24 MCUs and dedicated DSPs, offering a RISC core modified with DSP instructions, dual operand fetch, and a hardware multiply-accumulate unit. This makes DSCs ideal for closed-loop control loops that need both deterministic real-time behavior and math-intensive algorithms. Key features of the DSPIC33FJ256MC510AT-I/PF include the 16-bit dsPIC33F RISC core rated at 40 MIPS, 256KB (256K x 8) of self-programmable Flash, 16KB of SRAM, 8 DMA channels, 9 timers, and 4 serial I/O modules. The MC (Motor Control) variant integrates dedicated peripherals for three-phase inverter drive, making it a strong fit for field-oriented control firmware. Architecturally, the CMOS device employs a 3-stage pipeline with separate program and data buses (Harvard architecture), single-cycle MAC operations, and support for DSP multiply, divide, and bit-manipulation instructions. The core clock reaches 40 MHz, corresponding to the 40 MIPS rating. Typical applications include brushless DC (BLDC) motor drive, single- and three-phase induction motor control, switched reluctance motor systems, uninterruptible power supplies (UPS), and digital power conversion - use cases Microchip explicitly targets with the dsPIC33F MC family. Digital filtering and sensor fusion tasks in industrial automation also benefit from the on-chip DSP engine. Design consideration: the 3V-3.6V supply window requires a clean LDO or buck-derived rail; leave adequate decoupling on all VDD/VDDCORE pairs, and verify Flash programming voltage requirements during in-circuit programming with tools like PICkit or ICD headers. This page synthesizes distributor pricing, drop-in alternatives, pin-package options, and motor-control design notes not consolidated in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ256MC510T-I/PF

DSPIC33FJ256MC510T-I/PF - 16-bit DSC 40MIPS 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256MC510T-I/PF is a 16-bit digital signal controller (DSC) from the dsPIC33F Motor Control family, delivering 40 MIPS performance with 256KB of FLASH program memory and 16KB of RAM, housed in a 100-pin TQFP (14x14 mm) lead-free plastic package. A digital signal controller combines the computational power of a digital signal processor (DSP) with the peripheral integration and control flexibility of a microcontroller (MCU). In the system hierarchy, the dsPIC33F sits between general-purpose MCUs and dedicated DSPs: it executes microcontroller-style deterministic interrupt-driven control loops while providing hardware DSP multiply-accumulate instructions for filtering and transformation tasks. This makes DSCs the preferred choice for closed-loop power conversion and motor drive systems. Key features of the DSPIC33FJ256MC510T-I/PF include a 16-bit dsPIC core running at up to 40 MIPS from a 3.0V to 3.6V supply, 35 I/O pins, and motor-control-centric peripherals: high-speed PWM modules, up to four high-speed comparators with direct connections, and a high-speed ADC for simultaneous multi-channel current sampling. Connectivity covers CANbus, I2C, IrDA, LINbus, SPI, and UART/USART, enabling integration into automotive-style and industrial networks. Architecturally, the dsPIC33F core pairs a 16-bit modified Harvard pipeline with two 40-bit accumulators and hardware DSP instructions, allowing single-cycle MAC operations at the full 40 MIPS clock rate. The flash-based program memory supports in-circuit self-programming, and the device offers seamless migration paths to PIC24 MCUs and dsPIC30F DSCs in similar packages, protecting software and hardware investment. Typical applications include brushless DC motor drives, single- and 3-phase induction motor control, switched reluctance motor systems, and digital power supplies such as LLC and PFC stages. The high-speed PWM, ADC, and comparator set maps directly onto sensorless FOC control loops. Design consideration: operate the device within its 3.0V to 3.6V supply window and budget decoupling per supply pin pair; the 100-pin TQFP with 0.5 mm pitch requires careful PCB land-pattern compliance for reliable assembly. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet, providing added selection value beyond the raw specification table.

طلب عرض سعر اتصل بنا

DSPIC33FJ256MC710-I/PF

DSPIC33FJ256MC710-I/PF - 40MIPS 16-bit DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256MC710-I/PF is a 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS from its dsPIC33F core, with 256KB of Flash program memory and 8192 words (30KB) of RAM, housed in a 100-pin TQFP (14x14 mm, PF) surface-mount package rated for the industrial temperature range of -40C to +85C. A Digital Signal Controller combines the compute structure of a microcontroller with the mathematical acceleration of a digital signal processor. In the power-management IC hierarchy, the dsPIC33F sits between general-purpose MCUs (such as the PIC24H family, with which it is pin compatible) and dedicated DSPs, offering a hardware multiply-accumulate (MAC) unit, barrel shifter, and fixed-point DSP engine within an MCU-class peripheral set. This makes it a natural fit for embedded control loops that also need real-time signal math. Key features of the DSPIC33FJ256MC710-I/PF include its 40 MIPS performance at 3.3V operation, 256KB of self-programmable Flash, and a motor-control-oriented peripheral suite with complementary PWM outputs and quadrature encoder interface support, tailored for digital power conversion and motion control. According to Microchip product documentation, the family offers seamless migration options to and from PIC24 MCUs and dsPIC30F DSCs in similar packages. Technically, the dsPIC33F core executes C compiler-friendly 16-bit instructions while the DSP engine performs single-cycle MAC operations; boundary-scan support and in-circuit serial programming (ICSP) via PGECx/PGEDx pin pairs simplify debug and production programming. Microchip notes that all VDD and VSS pins must be connected and PGECx/PGEDx must be used as matched pairs for reliable programming. Typical applications include brushless DC motor drives, single- and three-phase induction motor control, switched reluctance motors, digital power supplies, and sensorless servo positioning systems where deterministic 40 MIPS execution and fast interrupt response matter. A key design consideration: the DS (not recommended for new design) status of the base dsPIC33FJ256MC710 means new designs should target the pin-compatible dsPIC33FJ256MC710A variant, which shares the same TQFP-100 footprint. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا

DSPIC33FJ256MC710-I/PT

DSPIC33FJ256MC710-I/PT - 40 MIPS 16-bit DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256MC710-I/PT is a high-performance 16-bit Digital Signal Controller (DSC) delivering 40 MIPS core throughput with 256 KB of self-programmable Flash program memory, housed in a 100-pin TQFP (12x12 mm) package rated for the industrial -40C to +85C temperature range. A Digital Signal Controller (DSC) is a hybrid device that combines the deterministic interrupt response and peripheral integration of a microcontroller (MCU) with the single-cycle multiply-accumulate (MAC) throughput of a digital signal processor (DSP). In the embedded-control hierarchy, a DSC sits between general-purpose 16-bit MCUs (such as the PIC24 family) and standalone DSPs, making it the de-facto choice for high-bandwidth control loops such as field-oriented motor control, digital power conversion, and sensor-fusion front ends. Key features of the DSPIC33FJ256MC710-I/PT include a 40 MIPS modified-Harvard 16-bit core with DSP engine extensions (17-bit x 17-bit single-cycle multiplier and 40-bit accumulator), an 8-channel DMA controller, dual 10-bit/12-bit-configurable ADC modules supporting simultaneous sampling, motor-control PWM with dedicated time bases, an ECAN interface, and self-programmable Flash for in-field firmware upgrades. Architecturally, the dsPIC33F core integrates a 24-bit instruction word with 16-bit data paths, enabling both 16-bit MCU and DSP instruction sets in one binary-compatible ISA. Seamless migration paths to PIC24 MCUs and dsPIC30F DSCs in similar 100-pin TQFP packages are supported per the Microchip product page, allowing teams to scale memory or peripheral counts without redesigning the PCB. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous (PMSM) motor drives, single- and three-phase induction motor control, switched-reluctance drives, digital switch-mode power supplies, and industrial sensor-front-end processing. The motor-control PWM (with complementary outputs and programmable dead time) and dual simultaneous-sampling ADCs make this DSC particularly well-suited to sensorless field-oriented control (FOC). Multiple PGECx / PGEDx pin pairs are exposed for ICSP programming and debugging; the pair used must remain consistent, and every VDD / VSS pin must be connected, otherwise programming may fail. This page synthesizes distributor pricing, drop-in 100-pin TQFP alternatives, and practical design notes not consolidated in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ256MC710A-E/PF

DSPIC33FJ256MC710A-E/PF - 16-bit DSC 40MIPS 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256MC710A-E/PF is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance from 256 KB flash and 30 KB SRAM, housed in a 100-pin TQFP (14x14 mm) package rated for -40C to +125C extended industrial operation. The part is the -E (extended) temperature variant of the MC710A motor-control family, supplied in tray packaging for design and production use. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and deterministic control of a microcontroller. Within the embedded-classification hierarchy, the dsPIC33F family sits above basic MCUs and below standalone DSPs, offering single-cycle MAC, hardware multiply, and divide alongside flash-based code storage. DSCs of this class are the workhorse architecture for digitally controlled power conversion and motion systems, where deterministic interrupt response and DSP-grade math are both mandatory. Key differentiators of this part include the A-silicon revision of the MC710 family, dedicated motor-control PWM modules with complementary outputs and dead-time insertion, fault inputs, a high-speed 10-bit ADC capable of 1.1 Msps, two ECAN interfaces for industrial networking, and quadrature encoder interfaces for closed-loop motion feedback. The 256 KB flash supports complex field-oriented control (FOC) algorithms with headroom for CANopen stacks and bootloaders. Architecturally, the dsPIC33F core executes an optimized C-compiler-friendly instruction set with two 40-bit accumulators, hardware modulo addressing, and bit-reversed addressing for FFTs. The MC variant tailors peripherals toward digital power: eight PWM generators with flexible trigger sources, analog comparators, and a fast ADC that can be triggered synchronously by the PWM for precise current sampling. Typical applications include brushless DC (BLDC), permanent-magnet synchronous (PMSM), single/three-phase induction, and switched reluctance motor drives, plus digital power supplies, solar inverters, and uninterruptible power supplies (UPS). On-chip ECAN makes it a natural fit for automotive-adjacent and industrial networked drives where CANopen or DeviceNet stacks are deployed. Design consideration: the 3.3 V core requires a clean supply with proper decoupling on all VDD and VDDCORE pins, and the 100-pin TQFP exposed pad must be soldered with adequate PCB copper for sustained 40 MIPS operation at +125C ambient. Use Microchip's MPLAB X IDE with the XC16 compiler for code development. This page synthesizes distributor pricing, drop-in same-package family alternatives, and practical design notes not found in the manufacturer datasheet, verified against Mouser, DigiKey, LCSC and Microchip sources as of 2026-10-07.

طلب عرض سعر اتصل بنا

DSPIC33FJ256MC710A-E/PT

DSPIC33FJ256MC710A-E/PT - 16-bit 40MIPS DSC 256KB | Microchip

The Microchip Technology DSPIC33FJ256MC710A-E/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPS execution from 256KB (256K x 8) of Flash program memory and 30KB (30K x 8) of RAM, housed in a 100-pin TQFP (12x12 mm) package with an extended temperature range of -40C to +125C (E grade). A digital signal controller is a hybrid device that merges the control peripheral set of a microcontroller with the multiply-accumulate (MAC/DSP) instruction throughput of a digital signal processor. Within the power management hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP, making it the standard choice for closed-loop power conversion where deterministic interrupt latency matters. The dsPIC33F family from Microchip Technology is one of the most widely deployed 16-bit DSC platforms in motor control and digital power. Key features of the MC710A variant include 85 general-purpose I/O pins, a 24-channel analog-to-digital converter supporting 10-bit and 12-bit modes, a CAN 2.0B controller, and the motor-control PWM peripherals (with center-aligned and complementary modes plus dead-time generators) that specifically target brushless DC, single-phase and 3-phase induction, and switched reluctance motor drives. Technically, the core runs at 3.0V to 3.6V with a 40 MIPS maximum clock, using a modified Harvard architecture with DSP multiply-accumulate, barrel shifter, and modulo/bit-reversed addressing for FFT and filter kernels. The 'A' revision adds industrial and automotive qualification; the -E/PT ordering code denotes the extended -40C to +125C temperature grade in a tape-free Tray package, and the family member is AEC-Q100 qualified per Microchip USA product data. Typical applications include BLDC and PMSM field-oriented-control motor drives, digital power supplies (PFC, LLC), solar inverters, and automotive auxiliary motor controllers requiring CAN networking. Design consideration: at 40 MIPS the core draws significant dynamic current; keep decoupling close to all VDD pins and budget Flash erase/write endurance by logging write cycles in your firmware. This page synthesizes distributor inventory data, drop-in alternatives, and engineering design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا

DSPIC33FJ256MC710A-H/PF

DSPIC33FJ256MC710A-H/PF - 16-bit DSC 256KB Flash 40MIPS | Microchip

The Microchip Technology DSPIC33FJ256MC710A-H/PF is a 16-bit dsPIC33F digital signal controller (DSC) delivering up to 40 MIPS performance, 256KB (256K x 8) FLASH program memory, 30KB SRAM, and AEC-Q100 qualification, housed in a 100-pin TQFP (14x14x1 mm) package. A digital signal controller combines the compute architecture of a microcontroller with DSP-engine features such as a single-cycle MAC, hardware divide, and DSP multiply instructions. Within the power-management hierarchy, a DSC sits between general-purpose MCUs and dedicated DSPs, making the dsPIC33F family a bridge product that Microchip positions for seamless migration to PIC24 MCUs and dsPIC30F DSCs in similar packages. Key differentiating features include motor-control peripherals (PWM for brushless DC, single/3-phase induction and switched-reluctance motors), a broad connectivity suite covering CANbus, I2C, IrDA, LINbus, SPI, and UART/USART, and the -H temperature grade rated from -40C to +150C per distributor data. The AEC-Q100 qualification targets automotive and harsh industrial deployments. The 16-bit dsPIC core executes an optimized C compiler-friendly instruction set with DSP extensions. Program flash of 256KB provides headroom for complex field-oriented control (FOC) algorithms, while 30KB SRAM accommodates control loops, communication buffers, and telemetry. Analog integration and motor-control PWM peripherals reduce external component count in drive designs. Typical applications include BLDC and PMSM motor drives, industrial automation nodes using CAN, automotive body and powertrain auxiliaries, digital power supplies, and UPS/solar inverter control where deterministic 16-bit control loops and DSP math are required. Design consideration: the -H grade's 150C rating reduces allowable current and timing margins at the extremes; verify per the manufacturer datasheet electrical specifications and confirm whether your board supports the 40 MIPS operating range (DigiKey lists 20 MIPS for this ordering code). This page synthesizes distributor pricing, drop-in alternatives within the same 100-TQFP footprint, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ256MC710A-H/PT

DSPIC33FJ256MC710A-H/PT - 16-bit DSC 256KB Flash 20 MIPS | Microchip

The Microchip Technology DSPIC33FJ256MC710A-H/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC33FJ256MC710A family, delivering 20 MIPS of DSP-enhanced performance with 256KB (256K x 8) of Flash program memory and 30KB of SRAM, housed in a 100-pin TQFP (12x12 mm) surface-mount package. A Digital Signal Controller combines the peripheral set and programming model of a microcontroller (MCU) with the computational throughput of a Digital Signal Processor (DSP). In the power-management hierarchy, the dsPIC33F family sits between general-purpose MCUs such as the PIC24 and dedicated DSPs, offering single-cycle MAC, hardware division, and DSP engine features alongside familiar MCU peripherals like CAN, I2C, SPI, and UART. Key features include 20 MIPS core throughput at 3.3V operation, 256KB of self-programmable Flash, and 30KB of on-chip SRAM. Connectivity spans CANbus, I2C, IrDA, LINbus, SPI, and UART/USART, and integrated system peripherals include brown-out detection. The device is qualified to AEC-Q100 for automotive applications, making it suitable for harsh-environment motor control nodes. The dsPIC33FJ256MC710A is specifically optimized for motor control: the family explicitly supports brushless DC (BLDC) motors, single- and 3-phase induction motors, and switched reluctance motors. The DSP engine accelerates field-oriented control (FOC) loops, while CAN connectivity enables in-vehicle networking. Microchip documents seamless migration paths from dsPIC30F DSCs and PIC24 MCUs in similar packages, protecting software investment. Typical applications include automotive BLDC and PMSM motor drives, industrial 3-phase inverter control, switched reluctance motor systems, digital power conversion (PFC, LLC), and unified communication-motor-control nodes where CAN, LIN, or UART links must coexist with real-time PWM control. Design consideration: the H temperature-grade device operates over an extended automotive range in the 100-TQFP; verify your maximum junction temperature against the theta-JA of your PCB copper area, as high ambient motor-drive environments are the primary thermal constraint. Power the 3.3V core and I/O rails from a clean LDO or buck regulator with proper decoupling on all VDD/VDDCORE pins. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, with all specifications verified against live web data as of 2026-09-27.

طلب عرض سعر اتصل بنا

DSPIC33FJ256MC710A-I/PF

DSPIC33FJ256MC710A-I/PF - 40 MIPS 16-bit DSC, 256KB Flash, 100-TQFP

The Microchip DSPIC33FJ256MC710A-I/PF is a 16-bit Digital Signal Controller (DSC) operating up to 40 MIPS, integrating 256 KB on-chip program memory and 30 KB RAM, housed in a 100-pin TQFP (14x14 mm) package. This part is the -I/PF industrial temperature, 100-TQFP variant of the dsPIC33FJ256MC710A motor-control family. What is a Digital Signal Controller? A DSC is a hybrid microcontroller that combines a traditional MCU control core with a high-throughput DSP engine. The dsPIC33F core executes instructions at up to 40 MIPS while the DSP engine provides single-cycle MAC, dual-operand fetch, and barrel shifter support, enabling closed-loop control algorithms at sub-microsecond loop rates. Within the broader semiconductor taxonomy, a DSC sits between an MCU and a DSP, optimized for real-time control of motors, power converters, and audio front-ends. Key features of the DSPIC33FJ256MC710A-I/PF include up to 85 I/O pins, two CAN 2.0B controllers, three SPI, three I2C, and two UART modules, plus advanced motor-control PWM with up to 8 PWM outputs and a 10-bit 1.1 Msps ADC with up to 32 input channels. The on-chip DMA engine and zero-overhead interrupt controller are intended for deterministic, real-time response in closed-loop servo and PFC applications. Typical applications targeted by this family include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, single and three-phase induction motor inverters, switched reluctance motor control, uninterruptible power supplies (UPS), power factor correction (PFC) stages, digital audio processing, and industrial automation. The on-chip CAN 2.0B peripheral supports multi-node motor networks and fieldbus protocols common in factory automation. When designing with this DSC, route the analog and digital grounds as separate islands joined at a single point, place the Vcap/Vddcore decoupling capacitor as close to the dedicated pin as possible, and use the on-chip DMA to offload ADC and PWM event handling from the CPU. Code development is supported by MPLAB X, the MPLAB dsPIC33F compiler, and the dsPIC Motor Control Library. This page synthesizes distributor pricing, drop-in same-family alternatives, and design considerations compiled across the Microchip product page and major distributor listings - content that is not aggregated on the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا

DSPIC33FJ256MC710A-I/PT

DSPIC33FJ256MC710A-I/PT - 16-bit 40MIPS Motor Control DSC | Microchip

The Microchip Technology DSPIC33FJ256MC710A-I/PT is a 16-bit Digital Signal Controller (DSC) delivering 40 MIPS from its dsPIC33F core, with 256 KB flash memory and 30 KB SRAM, housed in a 100-pin TQFP (12 x 12 mm) package rated for industrial temperatures from -40C to +85C. A Digital Signal Controller combines the control peripherals of a microcontroller (MCU) with the multiply-accumulate computational throughput of a Digital Signal Processor (DSP) in a single chip. Within the power-management hierarchy, the dsPIC33F Motor Control family sits between general-purpose 16-bit MCUs and dedicated DSPs, offering deterministic real-time control loops for motors and power conversion. This seamless migration position lets designers move between PIC24 MCUs and dsPIC30F/33F DSCs in similar packages without redesign. Key features include the 16-bit dsPIC33F CPU core with DSP engine, 256 KB of self-programmable flash and 30 KB SRAM, an 8-channel motor-control PWM module with dead-time generation, multiple UART, SPI and I2C serial ports, a CAN 2.0B controller, a 10-bit high-speed ADC, and industrial -40C to +85C operating range. The A-suffix family improves errata over the original dsPIC33FJ256MC710. Architecturally, the modified Harvard 16-bit core executes most instructions in a single cycle, with X and Y data memories supporting dual-operand DSP addressing. The motor-control PWM provides complementary outputs with programmable dead time and fault inputs, while the DMA keeps ADC-to-PWM update loops deterministic. Typical applications include brushless DC motor control, single- and three-phase induction motor drives, switched reluctance motors, UPS and inverter control, and universal motor control - precisely the markets Microchip targets with this family. When designing, place a low-ESR capacitor on the VCAP/VDDCORE pin and follow the datasheet decoupling guidance; PGC/PGD programming pins should be kept short for in-circuit programming via ICSP. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ256MC710T-I/PF

DSPIC33FJ256MC710T-I/PF - 16-bit 40MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256MC710T-I/PF is a 16-bit dsPIC33F Digital Signal Controller (DSC) delivering up to 40 MIPS with 256 KB (256K x 8) Flash program memory and 30 KB (30720 bytes) RAM, housed in a 100-pin TQFP (14x14 mm) surface-mount package. A Digital Signal Controller combines the control peripherals of a microcontroller with the DSP engine of a digital signal processor. In the embedded systems hierarchy, the dsPIC33F family sits between general-purpose MCUs and dedicated DSPs, providing deterministic C compiler-friendly operation, hardware multiply-accumulate, and motor-control peripherals in a single chip. Key features of the DSPIC33FJ256MC710T-I/PF include the dsPIC33FJ core running at 40 MIPS, 85 general-purpose I/O pins, a 24-channel analog-to-digital converter supporting both 10-bit and 12-bit modes, and the motor-control PWM peripherals that define the dsPIC33F MC family. The -40C to +85C industrial temperature rating and 3.0 V to 3.6 V single-supply operation suit factory and field environments. The dsPIC33FJ architecture integrates a 16-bit modified Harvard core with DSP instruction extensions, including a 40-bit wide accumulator, barrel shifter, and single-cycle multiply-accumulate, enabling fixed-point control loops and filtering while retaining interrupt-driven microcontroller behavior. According to Microchip, the dsPIC33F Motor Control products offer seamless migration options to PIC24 MCUs and dsPIC30F DSCs in similar packages, protecting software investment. Typical applications include brushless DC, single/three-phase induction and switched reluctance motor drives, digital power supplies, and industrial automation nodes where deterministic PWM plus ADC coordination is required. A key design consideration: Microchip notes this device has low flash endurance (guaranteed only 100 erase/write cycles), so avoid excessive self-programming wear during development. ICSP programming/debug via PGC/PGD pairs uses the Explorer 16 Development Board with the MA330013 PIM. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ256MC710T-I/PT

DSPIC33FJ256MC710T-I/PT - 16-bit DSC 40MIPS 256KB Flash | Microchip

The Microchip DSPIC33FJ256MC710T-I/PT is a 16-bit dsPIC33F motor-control Digital Signal Controller (DSC) delivering 40 MIPS from 256KB (256K x 8) FLASH with 30720 bytes of RAM, housed in a 100-pin TQFP (12x12 mm) package. A Digital Signal Controller combines the computational architecture of a microcontroller with the multiply-accumulate (MAC/DSP) engine of a digital signal processor. In the product hierarchy, the dsPIC33F sits between general-purpose MCUs (PIC24) and dedicated DSPs, offering a C-friendly 16-bit core plus hardware DSP instructions for control loops that need deterministic, cycle-accurate execution. Key features include a 40 MIPS 16-bit pipeline core, 256KB self-programmable FLASH with only 100 guaranteed erase/write cycles per northernsoftware.com support notes, 30KB on-chip SRAM, and 85 I/O lines for direct gate-drive and sensor interfacing. The MC (motor control) peripheral set integrates high-speed PWM modules, a high-speed ADC, and output-compare/capture resources aimed at field-oriented motor control. The dsPIC33FJ family is pin compatible with the PIC24H family and shares a high degree of compatibility with the dsPIC30F family, per the Microchip dsPIC33F Family Data Sheet (70165C), enabling migration between families without PCB redesign. Typical applications include brushless DC and PMSM motor drives, digital power supplies (PFC, LLC), solar inverters, and industrial motion control where deterministic PWM-ADC timing is essential. Design consideration: supply voltage must stay within 3V to 3.6V, and the low flash endurance (100 cycles) makes this part better suited to production firmware than to frequent field reprogramming during development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ32GP101-E/SS

DSPIC33FJ32GP101-E/SS - 16-Bit DSC 16 MIPs 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GP101-E/SS is a 16-bit dsPIC33F General Purpose (GP) Digital Signal Controller delivering 16 MIPs performance with 32KB (11K x 24) of Flash program memory and 2KB of SRAM, housed in a 28-pin SSOP surface-mount package with extended temperature rating (-40C to +125C). A digital signal controller (DSC) combines the architecture of a microcontroller with the computational capability of a digital signal processor. DSCs sit in the hierarchy between general-purpose MCUs and dedicated DSPs: they integrate a CPU, Flash, SRAM, and peripherals for embedded control, while adding DSP-class multiply-accumulate instructions for math-intensive tasks such as digital filtering and motor control. Key features include the 16-bit modified Harvard dsPIC33F core running at up to 16 MIPs from an internal PLL, a 10-bit ADC capable of high-rate sampling, output compare and input capture channels, and serial connectivity via I2C, SPI, and UART with IrDA and LINbus support. The -E extended temperature suffix qualifies the device for -40C to +125C operation, and per Microchip USA listings the device family carries AEC-Q100 qualification. Architecturally, the dsPIC33F core includes a 16-bit ALU, DSP engine with 17x17 multiplier and 40-bit accumulator, and two address generation units. In-circuit programming and debugging are supported through the MPLAB X IDE with the MPLAB Snap or ICD 3 tools, using the ICSP/ICD pins. Typical applications include industrial control panels, sensor signal conditioning with onboard digital filtering, utility metering, motor control interfaces, and general-purpose embedded systems that need DSP math without a separate DSP chip. A key design consideration is supply voltage: the device operates from 3.0V to 3.6V, so a 3.3V regulator with adequate decoupling on all VDD pins is required, and MCLR should be pulled up with a 10 kOhm resistor for reliable ICSP programming. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

طلب عرض سعر اتصل بنا

DSPIC33FJ32GP101-I/P

DSPIC33FJ32GP101-I/P - 16-Bit 16MIPS DSC, 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GP101-I/P is a 16-bit digital signal controller (DSC) delivering up to 16 MIPS at 32 MHz, with 32 KB (11K x 24) of Flash program memory and 2 KB of SRAM, housed in an 18-pin PDIP through-hole package rated for -40C to +85C operation. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral integration and ease of use of a microcontroller. Within the power management hierarchy, the DSC sits above a basic MCU: it adds DSP-class multiply-accumulate instructions, dual operand fetch, and high-resolution PWM and ADC peripherals, making it a power-management-class mixed-signal device for control loops and signal conditioning. Key features include 16 MIPS sustained performance from the dsPIC33F core, a 10-bit ADC supporting up to 1.1 Msps sampling with up to 6 external channels, two comparators, a 4-bit DAC for comparator references, and peripheral pin select (PPS) that remaps digital functions across RPn pins for maximum layout flexibility. Five 5V-tolerant input pins and in-circuit serial programming (ICSP) simplify board bring-up. Architecturally, the dsPIC33F executes most instructions in a single cycle with a 24-bit instruction word, hardware DSP multiply-accumulate, and two address generation units. The internal fast RC oscillator with PLL removes the need for an external crystal in many designs, while seven timer resources support capture, compare, and real-time tasks. Typical applications include digital power supplies and lighting control, sensor signal processing and filtering, closed-loop motor and actuator control, and portable instrumentation where the through-hole PDIP package eases prototyping and low-volume assembly. Design consideration: the device operates from a 3.0V to 3.6V supply; the metal pad underneath the PDIP is not connected but the datasheet recommends tying it externally to VSS, and all VDD/VSS pairs must be decoupled with 0.1 uF ceramics for reliable ICSP programming. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC33F family, pinout detail, and practical design notes not found in a single manufacturer datasheet page.

طلب عرض سعر اتصل بنا

DSPIC33FJ32GP101-I/SO

DSPIC33FJ32GP101-I/SO - 16-bit DSC 32KB Flash 16 MIPS | Microchip

The Microchip Technology DSPIC33FJ32GP101-I/SO is a 16-bit digital signal controller (DSC) from the dsPIC33FJ General Purpose family, delivering 16 MIPS performance with 32KB of Flash program memory and 2KB of RAM, supplied in an 18-pin wide SOIC package rated for industrial temperatures of -40C to +85C. It operates from a 3.3V supply. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller. In the product hierarchy, the dsPIC33FJ32GP101 is a 16-bit DSC, which itself belongs to the broader class of microcontrollers and embedded processors. DSCs are used where both control-loop logic and math-intensive signal processing (filters, transforms, control algorithms) must run in a single low-cost chip. Key features include a modified Harvard 16-bit RISC core executing up to 16 MIPS, 32KB of self-programmable Flash, 2KB of RAM, and General Purpose (GP) peripherals suited to signal-chain and general embedded control work. The device also offers in-circuit serial programming (ICSP) and in-circuit debugging via tools such as the MPLAB SNAP, using two device I/O pins and the reset line. Per the Microchip datasheet (DS70000652F family datasheet), the device provides flexible I/O with 10 mA or 6 mA pin-specific sink/source capability for standard VOH/VOL levels, up to 16 mA or 12 mA for non-standard levels, 5V-tolerant input pins, up to 20 selectable open-drain outputs and pull-ups, and three external interrupts (two of which are remappable). Typical applications include sensor signal conditioning, general-purpose embedded control, digital filtering, low-cost motor-adjacent control logic, and portable instrumentation where a single 3.3V rail and compact 18-pin SOIC-W footprint are advantageous. When designing with this DSC, verify the wide-body SOIC footprint (300-mil body) on your PCB, and budget the two I/O pins required for ICSP programming access during layout. This page synthesizes distributor availability, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet. Pricing shown as of 2026-09-27; stock status was listed as In Production by Microchip and ships-today availability was shown by DigiKey.

طلب عرض سعر اتصل بنا

DSPIC33FJ32GP101T-E/SO

DSPIC33FJ32GP101T-E/SO - 16-Bit 16 MIPS DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33FJ32GP101T-E/SO is a 16-bit dsPIC33F digital signal controller (DSC) delivering up to 16 MIPS from its dsPIC core, with 32KB (11K x 24) of FLASH program memory and 2KB of RAM, housed in an extended-temperature 18-pin SOIC package. A digital signal controller is a hybrid device that merges the deterministic control structure of a microcontroller (MCU) with the math throughput of a digital signal processor (DSP). Within the power management hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs, making it a natural fit for closed-loop power conversion, motor control, and sensor signal conditioning where both fast interrupts and multiply-accumulate operations are required. Key features of the DSPIC33FJ32GP101 include three 12-bit 1000 ksps ADC channels with simultaneous sampling support, a CTMU (Charge Time Measurement Unit) for capacitive touch and precision time measurement, an RTCC (Real-Time Clock and Calendar) module for timekeeping, and multiple remappable peripheral pin select (PPS) options that let designers route UART, SPI, and I2C functions to flexible pin locations. General-purpose I/O can sink or source up to 10 mA or 6 mA per pin, with 5V-tolerant input pins easing interfacing with legacy 5V logic. The -E temperature grade qualifies the device for operation across -40C to +125C ambient, and this specific ordering code is AEC-Q100 qualified, making it suitable for automotive-adjacent and other high-reliability applications. In-circuit debugging and In-Circuit Serial Programming (ICSP) are supported through any PGECx/PGEDx pin pair via MPLAB X IDE and the MPLAB Snap debugger. Typical applications include switch-mode power supplies, sensor signal conditioning, capacitive touch interfaces using the CTMU, and general-purpose control boards needing DSP-grade math in an 18-pin footprint. A key design consideration: the device requires the ICSP pair (PGECx and PGEDx) to be used consistently as a matched pair, and all VDD and VSS pins must be connected for programming to succeed. This page adds value beyond the manufacturer datasheet by consolidating distributor availability data, drop-in same-package alternatives, and practical design notes in one place.

طلب عرض سعر اتصل بنا

الفئات الفرعية

المنتجات (39,000+)

DSPIC33FJ256GP710A-H/PT - 16-bit 40 MIPs DSC 256KB | Microchip

DSPIC33FJ256GP710A-I/PF - 16-bit 40 MIPS DSC 256KB Flash TQFP-100 | Microchip

DSPIC33FJ256GP710A-I/PT - 16-bit 40MIPS 256KB DSC | Microchip

DSPIC33FJ256GP710AT-I/PF - 16-Bit 40MIPS 256KB Flash DSC | Microchip

DSPIC33FJ256GP710AT-I/PT - 16-bit DSC 40MIPS 256KB Flash | Microchip

DSPIC33FJ256GP710T-I/PT - 16-bit 40 MIPS DSC 256KB Flash | Microchip

DSPIC33FJ256MC510-I/PT - 16-Bit DSC 40 MIPS 256KB Flash | Microchip

DSPIC33FJ256MC510A-E/PT - 16-bit DSC 40MIPS 256KB Flash | Microchip

DSPIC33FJ256MC510AT-I/PF - 16-bit 40 MIPS DSC 256KB Flash | Microchip

DSPIC33FJ256MC510T-I/PF - 16-bit DSC 40MIPS 256KB Flash | Microchip

DSPIC33FJ256MC710-I/PF - 40MIPS 16-bit DSC 256KB Flash | Microchip

DSPIC33FJ256MC710-I/PT - 40 MIPS 16-bit DSC, 256KB Flash | Microchip

DSPIC33FJ256MC710A-E/PF - 16-bit DSC 40MIPS 256KB Flash | Microchip

DSPIC33FJ256MC710A-E/PT - 16-bit 40MIPS DSC 256KB | Microchip

DSPIC33FJ256MC710A-H/PF - 16-bit DSC 256KB Flash 40MIPS | Microchip

DSPIC33FJ256MC710A-H/PT - 16-bit DSC 256KB Flash 20 MIPS | Microchip

DSPIC33FJ256MC710A-I/PF - 40 MIPS 16-bit DSC, 256KB Flash, 100-TQFP

DSPIC33FJ256MC710A-I/PT - 16-bit 40MIPS Motor Control DSC | Microchip

DSPIC33FJ256MC710T-I/PF - 16-bit 40MIPS DSC 256KB Flash | Microchip

DSPIC33FJ256MC710T-I/PT - 16-bit DSC 40MIPS 256KB Flash | Microchip

DSPIC33FJ32GP101-E/SS - 16-Bit DSC 16 MIPs 32KB Flash | Microchip

DSPIC33FJ32GP101-I/P - 16-Bit 16MIPS DSC, 32KB Flash | Microchip

DSPIC33FJ32GP101-I/SO - 16-bit DSC 32KB Flash 16 MIPS | Microchip

DSPIC33FJ32GP101T-E/SO - 16-Bit 16 MIPS DSC 32KB Flash | Microchip