المتحكمات الدقيقة

المنتجات (20,000+)

PIC16F18346T-I/SO - 32MHz 8-bit XLP MCU, 28KB Flash, 20-SOIC
PIC16F18346T-I/SO

PIC16F18346T-I/SO - 32MHz 8-bit XLP MCU, 28KB Flash, 20-SOIC

The Microchip Technology PIC16F18346T-I/SO is an 8-bit PIC microcontroller from the PIC16F183xx family, featuring a 32MHz internal oscillator, 28KB (16K x 14 words) of Flash program memory, 2KB RAM and 256 bytes of EEPROM, housed in a 20-pin SOIC package with industrial -40C to +85C temperature rating. The 'T' suffix denotes Tape & Reel packaging and 'I' indicates the industrial temperature grade, while '/SO' specifies the 300-mil 20-SOIC footprint. An 8-bit PIC microcontroller is a low-power, RISC-architecture single-chip computer built around an enhanced mid-range core with a Harvard memory layout, designed for deterministic real-time control of analog and digital peripherals. PIC MCUs sit within the broader category of microcontrollers (MCUs), which are themselves a sub-class of embedded processors; XLP (eXtreme Low Power) variants add nanoWatt sleep modes that bring quiescent current down to the microamp range for battery-powered and energy-harvesting designs. Key features include 10-bit ADC, 5-bit DAC, two Comparators, a Numerically Controlled Oscillator (NCO), Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), 10-bit PWM, two Capture/Compare/PWM (CCP) modules, and Peripheral Pin Select (PPS) for flexible digital-peripheral pin mapping. Communication interfaces include two SPI/I2C and one EUSART, plus 18 I/O pins supporting capacitive-touch sensing via the mTouch peripheral. The architecture uses a 14-bit instruction word with single-cycle execution except for program branches, and the 32MHz internal oscillator supports a 125ns instruction cycle. PPS, CLC, CWG, and NCO are core-independent peripherals (CIPs) that operate without CPU intervention, offloading waveform generation, signal conditioning, and protocol bridging tasks. The device also integrates a Functional Safety (FuSa) capability and operates from 1.8V to 5.5V VDD, with on-chip voltage reference and zero-cross detection for power-conscious designs. Typical applications include low-power IoT sensor nodes, consumer touch-interface products, LED lighting controllers, battery-powered instrumentation, automotive body and accessory subsystems, and small-form-factor motor-control boards. The combination of CLC + NCO + CWG enables stand-alone waveform synthesis with the CPU in sleep, which is particularly useful in power-conversion and lighting-control designs. When designing with this part, select the appropriate ICSP programming header pins and reserve the PGD/PGC pair as shown in the Microchip datasheet. Use PPS remapping to route digital peripherals only to PPS-capable pins, and keep total I/O sink/source current per pin within the 25 mA/port datasheet limits to avoid triggering the thermal shutdown. This page synthesizes distributor pricing, drop-in package-equivalent alternatives, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a single reference for sourcing and selection decisions.

طلب عرض سعر اتصل بنا
PIC16F18424-E/JQ - 8-Bit XLP MCU 7KB Flash 16-UQFN | Microchip
PIC16F18424-E/JQ

PIC16F18424-E/JQ - 8-Bit XLP MCU 7KB Flash 16-UQFN | Microchip

The Microchip Technology PIC16F18424-E/JQ is an 8-bit PIC® microcontroller from the PIC16(L)F184xx family featuring eXtreme Low-Power (XLP) technology and Core Independent Peripherals (CIPs), housed in a 16-pin UQFN (4x4 mm) package. It integrates 7 KB of Flash program memory (4K x 14 words), 512 bytes of SRAM, and runs at up to 32 MHz internal oscillator speed, operating from 2.5 V to 5.5 V across the -40 °C to +125 °C extended automotive temperature range. A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory (typically Flash), working RAM, and a rich set of peripherals such as timers, ADCs, communication interfaces, and GPIO. PIC microcontrollers use a RISC architecture optimized for deterministic instruction execution and very low power consumption. The PIC16F18424 belongs to the enhanced mid-range 8-bit core family and adds CIPs that offload tasks like waveform generation, signal conditioning, and complementary output control without CPU intervention. Positioned in the hierarchy MCU -> microcontroller -> embedded controller -> semiconductor, this device targets battery-powered and space-constrained designs. Key specifications include a 12-bit ADC with Computation (ADCC), a 5-bit DAC, two PWMs, a Complementary Waveform Generator (CWG), an EUSART plus SPI/I2C peripherals, and Functional Safety (FuSa) support for safety-critical applications. The integrated Peripheral Pin Select (PPS) allows flexible remapping of digital peripherals to any I/O pin, simplifying PCB layout in small 16-pin packages. The 16-UQFN package measures just 4x4 mm, suiting wearables, sensor nodes, and handheld instruments. The XLP Sleep mode draws under 50 nA typical, and the device offers multiple low-power operating modes such as Doze, Idle, and Sleep with peripheral operation using the LFINTOSC or the 16 MHz HFINTOSC. Typical applications include IoT sensor nodes, battery-powered environmental monitors, LED lighting controllers, automotive body electronics, home appliance user interfaces, and low-power industrial sensor transmitters. Functional Safety support makes it a fit for auxiliary safety subsystems. When designing, place a 0.1 µF decoupling capacitor close to VDD and ensure the ICSP™/ICD pins are accessible for in-circuit programming and debug. Use PPS to route peripherals to convenient pins, and select the appropriate oscillator mode to balance wake-up time against quiescent current. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, organized for engineers comparing the PIC16F18424-E/JQ against other 8-bit and low-pin-count MCU options.

طلب عرض سعر اتصل بنا
PIC16F18424-E/P - 8-bit XLP MCU, 7KB Flash, 14-PDIP | Microchip
PIC16F18424-E/P

PIC16F18424-E/P - 8-bit XLP MCU, 7KB Flash, 14-PDIP | Microchip

The Microchip Technology PIC16F18424-E/P is an 8-bit PIC® microcontroller built around the PIC16 core with eXtreme Low-Power (XLP) technology, packaged in a 14-lead PDIP through-hole format. It runs at up to 32 MHz internal clock, carries 7 KB (4K × 14 words) of self-programmable Flash program memory, 512 bytes of SRAM, and integrates 12 bytes of data EEPROM for non-volatile user storage. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path. In the broader system hierarchy it sits under microcontroller -> embedded controller -> semiconductor device. The PIC16 family uses a RISC instruction set with a 14-bit program word and a small, deterministic instruction set optimized for compact code, fast context switching, and ultra-low-power operation. Microcontrollers like the PIC16F18424 are typically placed in the system alongside power management ICs, sensors, and discrete semiconductors on a mixed-signal board. Key features include a 12-bit ADC with Computation (ADCC), a 5-bit DAC, two PWMs, an on-chip comparator, a Complementary Waveform Generator (CWG), and the EUSART plus SPI/I2C serial engines. Functional Safety (FuSa) capability supports IEC 61508 SIL 2/3 system designs. The device supports 1.8V to 5.5V VDD operation, with typical sleep currents measured in the nanoampere range thanks to XLP technology. Typical applications include IoT sensor nodes, low-power wireless HMI controllers, battery-powered instrumentation, automotive body and sensor modules, and consumer white-goods user interfaces. The 14-pin PDIP package is favored for hobbyist and breadboard-friendly designs as well as through-hole industrial modules where mechanical robustness matters more than board density. When designing with this device, ensure your programmer/debugger supports the PIC16F18424 die (MPLAB X IDE with XC8 compiler and a PICkit 4 or Snap debugger are typical). If the design is pin-constrained, consider the same family in 8-pin SOIC/DFN; if the design needs higher pin count, look to the 20-pin PIC16F18446 in the same family.

طلب عرض سعر اتصل بنا
PIC16F18424-E/SL - 8-bit 32MHz XLP MCU 7KB Flash SOIC-14 | Microchip
PIC16F18424-E/SL

PIC16F18424-E/SL - 8-bit 32MHz XLP MCU 7KB Flash SOIC-14 | Microchip

The Microchip Technology PIC16F18424-E/SL is an 8-bit PIC RISC microcontroller running at 32 MHz with 7 KB of Flash program memory, 512 B of SRAM, and 256 B of EEPROM, housed in a 14-pin SOIC (SL) package. The device belongs to the PIC16(L)F184xx family and combines eXtreme Low Power (XLP) technology with Functional Safety (FuSa) features for general-purpose and low-power applications. An 8-bit microcontroller is a single-chip computer built around an 8-bit data path, integrating a CPU core, non-volatile program memory, volatile data memory, and a rich set of peripherals (ADC, timers, communication ports). The PIC16F18424 specifically is part of the PIC16 -> PIC microcontroller -> 8-bit MCU -> embedded microcontroller -> semiconductor taxonomy, and supports 2.5V/3.3V/5V operation across industrial and consumer applications. Key features include 7 KB (4K x 14) of self-programmable Flash, 12-bit ADCC with computation, two PWMs, a comparator, a 5-bit DAC, a Complementary Waveform Generator (CWG), EUSART, SPI, and I2C. The device offers up to 12 I/O pins, runs from 1.8V to 5.5V (F-version, 32 MHz), and supports the eXtreme Low Power sleep mode for battery-driven designs. Technically, the PIC16F18424 uses a 14-bit instruction width RISC architecture with a modified Harvard bus structure, allowing single-cycle instruction execution except for branches. The 12-bit ADC with Computation (ADCC) automates averaging, filtering, and threshold comparison, offloading CPU cycles. Built-in peripheral pin select simplifies PCB routing by remapping digital functions across most I/O pins. Typical applications include IoT sensor nodes, battery-powered wearables, home appliances, lighting controls, industrial sensor interfaces, and low-cost motor control. The XLP mode is particularly valuable for energy-harvesting designs where quiescent current dominates total energy budget. When designing with this part, configure the configuration words (CONFIG1/CONFIG2) at the top of every C source to set oscillator, watchdog, and code-protect behavior. An external decoupling capacitor of 100 nF placed within 5 mm of VDD is required to meet the noise-immunity specification under 32 MHz operation. This page consolidates current distributor pricing, verified drop-in alternatives, and practical design notes that complement the manufacturer datasheet.

طلب عرض سعر اتصل بنا
PIC16F18424-E/ST - 8-bit MCU, 7KB Flash, 32MHz, TSSOP-14 | Microchip
PIC16F18424-E/ST

PIC16F18424-E/ST - 8-bit MCU, 7KB Flash, 32MHz, TSSOP-14 | Microchip

The Microchip Technology PIC16F18424-E/ST is an 8-bit PIC microcontroller from the PIC16F184xx family, featuring 7KB of Flash program memory, 512 bytes of RAM, and a maximum CPU clock of 32MHz, housed in a 14-pin TSSOP package. It integrates Core Independent Peripherals (CIPs) such as a 12-bit ADC with Computation (ADCC), a 5-bit DAC, two PWMs, a Complementary Waveform Generator (CWG), a comparator, and EUSART plus SPI/I2C serial interfaces, all while supporting eXtreme Low-Power (XLP) operation. An 8-bit microcontroller (MCU) is a small computer-on-a-chip that combines a CPU, memory, and peripherals around an 8-bit data bus. It belongs to the broader category of microcontrollers -> embedded processors -> integrated circuits -> semiconductors. PIC microcontrollers use a modified Harvard RISC architecture that executes most instructions in a single clock cycle, which is why the PIC16F18424 can sustain 32MHz core operation while maintaining very low active and sleep currents. Key features of this part include 4K x 14 words of Flash (7KB), 256 bytes of EEPROM, 512 bytes of SRAM, 12-bit ADCC with automatic averaging, 5-bit DAC, two capture/compare/PWM modules, CWG, 2 comparators, EUSART, SPI, I2C, and up to 12 I/O pins. The device operates from 2.5V to 5.5V across an industrial temperature range of -40C to +125C, and includes the eXtreme Low-Power (XLP) sleep currents required for battery-powered designs. The PIC16F18424 uses Microchip's enhanced mid-range core with a 14-bit instruction word and 16-level hardware stack. Functional Safety (FuSa) variants are available in the same family for IEC 61508 SIL applications, and the on-chip CWG plus high-resolution PWM enable motor, lighting, and Class-D audio topologies without external timing logic. Typical applications include low-power sensor nodes, IoT end nodes, LED lighting controls, battery management front-ends, consumer appliances, and automotive body electronics. The integrated CIPs allow analog signal conditioning, sensor interfacing, and actuator driving with minimal external component count. When designing with this MCU, ensure the configuration words are set correctly for the intended oscillator mode, allocate I/O pin remapping through PPS before locking the pinout, and reserve budget for ICD/ICSP header access during development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving engineers a single source for selection, sourcing, and PCB-level integration decisions.

طلب عرض سعر اتصل بنا
PIC16F18424-I/JQ - 8-bit 32MHz XLP MCU 7KB Flash | Microchip
PIC16F18424-I/JQ

PIC16F18424-I/JQ - 8-bit 32MHz XLP MCU 7KB Flash | Microchip

The Microchip PIC16F18424-I/JQ is an 8-bit PIC microcontroller featuring a 32 MHz internal oscillator, 7.168 KB of flash program memory (4K x 14 words), 512 bytes of SRAM, and 128 bytes of data EEPROM, housed in a 16-pin UQFN (4x4 mm) package with exposed thermal pad. The part carries the industrial temperature grade suffix ("I") and the JQ package designation, and it belongs to the PIC16(L)F184xx functional-safety-ready family. Core Independent Peripherals (CIPs) include 12-bit ADCC, two PWM modules, two comparators, a 5-bit DAC, CWG, EUSART, SPI, and I2C, complemented by eXtreme Low-Power (XLP) technology for battery-driven designs. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, data memory, and programmable peripherals on a single silicon die. The PIC16 family uses a modified Harvard RISC architecture optimized for deterministic instruction execution at low power, and it sits at the entry point of Microchip's 8-bit portfolio above the baseline PIC10/12/16F baseline parts. The "F" in PIC16F184xx denotes flash program memory, allowing field re-programmability, while the "184xx" series extends earlier PIC16F1xxx devices with higher analog performance, more CIPs, and richer communication peripherals. Key features of the PIC16F18424-I/JQ include 12 I/O pins, an internal 32 MHz oscillator with PLL, the previously listed peripheral set, and integrated support for functional safety. The 12-bit ADCC (Analog-to-Digital Converter with Computation) can automate averaging, oversampling, and threshold comparisons, offloading work from the core. CWG (Complementary Waveform Generator) simplifies synchronous motor drive and Class-D audio stages, and the peripheral pin-select (PPS) scheme lets designers remap digital functions to most I/O pins. Combined with the XLP nanoWatt XLP sleep modes, the device targets low duty-cycle, battery-powered IoT nodes. The PIC16F18424-I/JQ uses Microchip's standard 14-bit instruction word PIC16 core, with 49 instructions and 16-level hardware stack. Functional-safety-ready firmware libraries, FMEDA, and diagnostic documentation are available from Microchip for IEC 61508 SIL 2/3 systems, which is why this part appears in safety-focused designs. The device operates from 1.8 V to 5.5 V (PIC16F part) and supports in-circuit serial programming (ICSP) via the ICSPCLK/ICSPDAT pins. Typical applications include sensor signal conditioning using the 12-bit ADCC, battery-powered IoT sensor nodes exploiting XLP sleep modes, low-cost motor control (BLDC, stepper) with the CWG, lighting-control slaves using EUSART/SPI/I2C, and consumer/HMI buttons or LED drivers. The exposed pad on the UQFN aids thermal dissipation in closed-enclosure industrial modules. When designing with this device, ensure the ICSPCLK/ICSPDAT pins are accessible for programming and debug, and place the recommended 0.1 uF bypass capacitor near VDD with a 10 uF bulk capacitor on the supply rail. For brown-out engineers, also verify the VBOR setting matches your minimum supply voltage. This page synthesizes distributor pricing, drop-in 16-pin UQFN alternatives, and practical design notes not aggregated in the manufacturer datasheet, giving engineers a faster path to part selection and PCB layout reuse.

طلب عرض سعر اتصل بنا
PIC16F18424-I/P - 8-bit 32MHz 7KB Flash XLP MCU | Microchip
PIC16F18424-I/P

PIC16F18424-I/P - 8-bit 32MHz 7KB Flash XLP MCU | Microchip

The Microchip Technology PIC16F18424-I/P is an 8-bit PIC16 microcontroller with 7KB of Flash program memory, 512 bytes of SRAM, and 128 bytes of EEPROM, operating at up to 32MHz from a 1.8V to 5.5V supply in a 14-pin PDIP through-hole package. The device integrates a 12-bit ADC with Computation (ADCC), two 10-bit PWMs, a 5-bit DAC, comparators, CWG, EUSART, SPI, and I2C peripherals in the XLP (eXtreme Low Power) family. An 8-bit microcontroller is a small computing system on a single IC that combines a CPU, non-volatile program memory (Flash), volatile working memory (RAM), and a configurable set of peripheral interfaces. PIC16F18424-I/P belongs to the PIC16F184xx family, sitting inside the broader 8-bit PIC microcontroller hierarchy, which in turn falls under the wider taxonomy of microcontrollers (MCU) and embedded processors. Its 14-bit instruction word architecture provides deterministic execution, while the ADCC and Core Independent Peripherals (CIPs) handle sensor and signal-conditioning tasks without CPU intervention. Key features include active current consumption in the microamp range with XLP sleep modes down to sub-1µA typical, four direct-drive LED PWM outputs, and an integrated temperature indicator. The 14-pin PDIP package offers easy through-hole prototyping, breadboarding, and educational use, while the same die is also available in 14-pin SOIC, 16-pin QFN, and 20-pin variants for production. The ADCC supports automated averaging, threshold comparison, and burst accumulation for low-noise sensor reads. The PIC16F18424-I/P is supported by Microchip's MPLAB X IDE, the XC8 C compiler, and the MPLAB Code Configurator (MCC) which generates peripheral initialization code and pin manager diagrams. Functional Safety (FuSa) documentation, IEC 60730 class B software libraries, and a documented baseline of safety-relevant peripherals make this part suitable for safety-critical consumer and appliance applications. Typical applications include battery-powered IoT sensor nodes, white goods and appliance user interfaces, LED lighting control, low-cost consumer electronics, and general-purpose replacement of legacy PIC16F and PIC16LF designs. The wide 1.8V to 5.5V supply range supports both lithium battery and 5V regulated rails. When designing with this MCU, reserve adequate decoupling on VDD/AVDD/VBAT (a 0.1µF ceramic adjacent to each pin) and configure unused I/O as outputs to minimize sleep current. The ICSP/ICD pins (RB6, RB7) require series resistors or careful trace layout if they are also used as general I/O. This page synthesizes distributor pricing as of 2026-09-20, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone. Sources include Microchip's product page, DigiKey, Mouser, and Octopart.

طلب عرض سعر اتصل بنا
PIC16F18424-I/SL - 8-Bit 32MHz MCU, 7KB Flash, XLP, 14-SOIC
PIC16F18424-I/SL

PIC16F18424-I/SL - 8-Bit 32MHz MCU, 7KB Flash, XLP, 14-SOIC

The Microchip Technology PIC16F18424-I/SL is an 8-bit RISC microcontroller from the PIC16(L)F184xx family, featuring a PIC16 CPU core operating up to 32 MHz and housed in a 14-pin SOIC (SL) package. It integrates 7 KB of FLASH program memory, 512 bytes of SRAM, and 256 bytes of EEPROM, with 12 I/O lines, 11 timers, and 12 external interrupts. Core Independent Peripherals (CIPs) include a 12-bit ADC with Computation (ADCC), two PWMs, a Complementary Waveform Generator (CWG), a Digital-to-Analog Converter (DAC), EUSART, SPI, and I2C communication interfaces. An 8-bit microcontroller (MCU) is a compact computing device that integrates a CPU, RAM, non-volatile program memory, and peripherals onto a single die. The PIC16 architecture uses a 14-bit instruction word and modified Harvard memory layout, enabling deterministic single-cycle execution of most instructions. Microcontrollers in this class sit within the broader embedded hierarchy as: MCU -> 8-bit MCU -> PIC16 family -> PIC16F184xx sub-family -> PIC16F18424 device, providing a balance of low power, peripheral integration, and ease of development for general-purpose and battery-powered designs. Key features of the PIC16F18424-I/SL include eXtreme Low-Power (XLP) technology with typical sleep currents below 50 nA, a wide operating voltage range from 1.8V to 5.5V (F-variant), and the integrated 12-bit ADCC for sensor measurement. The device also supports Memory Access Partitioning (MAP) and a Device Information Area (DIA) for application-specific calibration constants. Architecturally, the PIC16F18424 uses a RISC core with 49 instructions, a hardware stack, and an interrupt controller supporting both core and peripheral interrupts. The 12-bit ADCC runs up to 100 ksps and includes averaging, oversampling, and threshold-scan modes that offload signal-conditioning work from the CPU. The CIP philosophy lets timers, PWMs, CWG, and the ADCC chain without CPU intervention, reducing active-mode power consumption. Typical applications include battery-powered IoT sensor nodes, consumer electronics remote controls, industrial automation modules, low-power wireless sensor platforms, and functional-safety-capable embedded subsystems. The combination of XLP, 12-bit ADCC, and integrated CIPs makes the part particularly attractive for thermostats, wearables, and portable instrumentation. When designing with this MCU, plan the clock tree carefully: switching from the 32 MHz HFINTOSC to the 31 kHz LFINTOSC during sleep lowers current draw but requires wake-up timing analysis. Use MPLAB X IDE with XC8 compiler and MPLAB Code Configurator (MCC) to generate CIP link chains and ADCC setup code, avoiding hand-written peripheral register access.

طلب عرض سعر اتصل بنا
PIC16F18424-I/ST - 8-bit MCU, 7KB Flash, 32MHz, 14-TSSOP | Microchip
PIC16F18424-I/ST

PIC16F18424-I/ST - 8-bit MCU, 7KB Flash, 32MHz, 14-TSSOP | Microchip

The Microchip Technology PIC16F18424-I/ST is an 8-bit PIC microcontroller built on the enhanced mid-range core, offering 7KB of Flash program memory, 512 bytes of RAM, and 32 MHz CPU performance inside a 14-pin TSSOP package. The part combines Core Independent Peripherals (CIPs) including a 12-bit ADC with Computation (ADCC), a 5-bit DAC, two PWM modules, a Comparator, CWG, EUSART, SPI and I2C, and eXtreme Low-Power (XLP) technology with Functional Safety (FuSa) support. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and peripheral IP into one package, optimized for deterministic real-time control rather than raw compute throughput. Within Microchip's portfolio, the PIC16F184xx family sits at the top of the PIC16 mid-range lineup and belongs to the broader 8-bit MCU category alongside AVR and 8051 architectures. These MCUs target general-purpose embedded designs where cost, power, and easy analog/digital integration matter more than MHz or MIPS. Key features include 7KB (4K x 14) Flash, 256 bytes EEPROM, 512 bytes RAM, 12-bit ADCC, 5-bit DAC, 2x PWM with complementary outputs, CWG, Numerically Controlled Oscillator (NCO), CLC, and EUSART plus SPI/I2C. The XLP sleep currents reach down to the low nA range, making the part ideal for battery-powered sensing nodes. Functional Safety documentation aids IEC 61508 SIL capable system designs. The device uses a 14-bit instruction word modified Harvard architecture with a hardware stack and interrupt controller, supported by MPLAB X IDE, XC8 compilers, and the MPLAB Code Configurator (MCC). The TSSOP-14 footprint keeps board area minimal while exposing all major peripherals. Typical applications include IoT sensor nodes, battery-powered wearables, low-power wireless front-ends, consumer white goods, LED lighting controllers, and small motor control loops. The wide 1.8V-5.5V VDD range suits both 3.3V and 5V system rails. When designing, place a 0.1uF decoupling capacitor within 5 mm of VDD, route MCLR through a 10 kohm pull-up, and leave the ICSPDAT/ICSPCLK pins accessible for in-circuit serial programming. The TSSOP thermal pad is not internally bonded; standard TSSOP-14 land pattern applies. This page synthesizes distributor pricing, verified pin-compatible drop-in alternatives from the PIC16F183xx family, and practical design notes that go beyond the manufacturer datasheet.

طلب عرض سعر اتصل بنا
PIC16F18424T-I/JQ - 8-Bit 32MHz 7KB Flash MCU | Microchip
PIC16F18424T-I/JQ

PIC16F18424T-I/JQ - 8-Bit 32MHz 7KB Flash MCU | Microchip

The Microchip Technology PIC16F18424T-I/JQ is an 8-bit PIC microcontroller from the PIC16(L)F184xx family featuring Functional Safety (FuSa) capability, Core Independent Peripherals (CIPs), and eXtreme Low-Power (XLP) technology. It operates at up to 32 MHz, integrates 7 KB (4K x 14) of flash program memory, 512 bytes of SRAM, and 256 bytes of EEPROM, all housed in a compact 16-lead UQFN (4x4) package with tape-and-reel packaging. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically flash), working memory (RAM), data EEPROM, and a rich set of peripherals including timers, communication interfaces, and analog blocks. The PIC16F18424 belongs to the 8-bit PIC16 family of low-pin-count MCUs, sitting within the broader PIC microcontroller -> Microchip 8-bit product line -> embedded controller -> semiconductor hierarchy. It targets general-purpose and battery-powered applications that need strong analog integration without sacrificing low power. Key features include a 12-bit ADC with Computation (ADCC), two 10-bit PWMs, a 5-bit DAC, a comparator, Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), and serial interfaces including EUSART, SPI, and I2C. The XLP technology delivers typical sleep currents in the nanoamp range and active currents well under 1 mA/MIPS, making it suitable for energy-harvesting and always-on designs. It also includes an integrated temperature indicator and supports the Functional Safety (FuSa) hardware diagnostic library required by IEC 61508 SIL-2 capable applications. The wide 2.3 V to 5.5 V supply range further broadens its deployment flexibility across 3.3 V and 5 V rails. Typical applications include low-power IoT sensor nodes, home automation controllers, battery management ICs, LED lighting controllers, and small industrial control modules. Its compact 4x4 mm UQFN footprint is also ideal for space-constrained wearables and consumer gadgets. When designing, ensure the decoupling capacitor is placed within a few millimetres of the VDD pin and that the MCLR pin is pulled high through a proper resistor to guarantee clean reset behavior. Compared with the 20-pin PIC16F18444, this 16-pin variant sacrifices a few I/O lines and a second EUSART for its smaller footprint. This page synthesizes XAIPART distributor pricing, Microchip-validated drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا
PIC16F18424T-I/ST - 8-Bit 32MHz 7KB Flash MCU 14-TSSOP | Microchip
PIC16F18424T-I/ST

PIC16F18424T-I/ST - 8-Bit 32MHz 7KB Flash MCU 14-TSSOP | Microchip

The Microchip Technology PIC16F18424T-I/ST is an 8-bit PIC microcontroller from the PIC16(L)F184xx family, operating at up to 32 MHz with 7 KB (4K x 14 words) of Flash program memory, housed in a 14-pin TSSOP (ST) package supplied on tape and reel. The device integrates Microchip's eXtreme Low-Power (XLP) technology with Core Independent Peripherals (CIPs) and supports Functional Safety (FuSa) for safety-critical embedded systems. A microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash), data memory (RAM), and peripheral interfaces such as timers, ADC, communication ports, and GPIO into one package. The PIC16F18424 sits in the broader hierarchy of 8-bit microcontroller -> PIC16 family -> mid-range PIC architecture -> embedded computing device, optimized for low-power and general-purpose control. Its 14-pin form factor targets compact, low-pin-count designs that still demand modern analog and connectivity features. Key features include 7 KB Flash, 512 B RAM, two PWMs, a 12-bit ADC with Computation (ADCC), a 5-bit DAC, a comparator, a Complementary Waveform Generator (CWG), and communication peripherals supporting EUSART, SPI, and I2C. The device operates from 1.8 V to 5.5 V, supports up to 32 MHz internal oscillator, and includes up to 12 I/O pins depending on package variant. On-chip peripherals execute independently of the CPU via CIPs, offloading signal generation, conversion, and timing tasks for deterministic, low-latency response. The PIC16F18424T-I/ST uses a RISC-based mid-range core with a 14-bit instruction word and single-cycle execution for most instructions, delivering 32 MHz performance at very low power. XLP technology enables nanoWatt sleep currents in the sub-100 nA range with retention, while integrated peripherals such as ADCC, CWG, and configurable logic cells operate without waking the core. The TSSOP-14 package offers an industry-standard 0.65 mm pitch 14-pin surface-mount footprint. Typical applications include consumer appliance control, IoT sensor nodes, battery-powered handheld instruments, LED lighting controllers, and automotive body/auxiliary modules where FuSa-ready firmware libraries assist functional-safety compliance. The combination of small package size and rich analog/digital integration suits space-constrained designs that need precise sensing and local actuation in a single chip. When designing with this device, prioritize proper decoupling (100 nF ceramic close to VDD) and confirm the ICSP/PGD/PGC pins are routed to a programming header for in-circuit programming. Designers should also verify that the chosen 14-pin variant exposes the required peripheral pins, since smaller packages multiplex functions onto shared I/O. This page combines verified distributor pricing, drop-in pin-compatible alternatives, and design notes not found in the manufacturer datasheet, giving procurement and engineering teams a complete decision-making view for the PIC16F18424T-I/ST in one place.

طلب عرض سعر اتصل بنا
PIC16F18425-E/P - 8-Bit 32MHz 14KB Flash MCU | Microchip
PIC16F18425-E/P

PIC16F18425-E/P - 8-Bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F18425-E/P is an 8-bit RISC microcontroller based on the PIC16 CPU core, delivering 32MHz of computing performance with 14KB of Flash program memory, 1KB of data RAM, and 256 bytes of data EEPROM in a 14-pin PDIP through-hole package. The part integrates a 12-bit ADC with computation (ADCC), two comparators, a 5-bit DAC, two PWM channels, a Configurable Logic Cell (CLC), a Complementary Waveform Generator (CWG), and both EUSART and SPI/I2C communication peripherals, addressing general-purpose and low-power embedded designs. An 8-bit microcontroller (MCU) is a programmable integrated circuit that combines a CPU, non-volatile program memory, volatile data memory, and on-chip peripherals in a single package. The PIC16F18425 sits within the larger taxonomy of microcontroller -> 8-bit MCU -> PIC16 family -> PIC16F184xx sub-family -> low-pin-count XLP line, optimized for cost-sensitive and battery-powered applications where eXtreme Low-Power (XLP) technology and Core Independent Peripherals (CIPs) reduce CPU wake time and active current draw. Key features of the PIC16F18425-E/P include 32MHz internal oscillator operation, eXtreme Low-Power (XLP) technology with sleep currents in the nanoamp range, a 12-bit ADCC with up to 30 channels (depending on package), Core Independent Peripherals such as the CLC, CWG, and NCO, and integrated safety features supporting IEC 61508 SIL 2/3 functional safety-capable designs when paired with the FuSa libraries. The wide 1.8V to 5.5V operating voltage range supports both 3.3V and 5V rails. Technically, the PIC16F18425 implements a Harvard-architecture RISC core with a 14-bit instruction word and hardware stack, achieving single-cycle execution on most instructions. The ADCC provides automated averaging, burst averaging, and threshold comparison, offloading signal-conditioning work from the CPU. The CWG can synthesize complementary PWM outputs with dead-band control, useful for half-bridge driver stages. Typical applications include low-power IoT sensor nodes, battery-powered home automation, LED lighting controllers, white-goods and small-motor control, automotive body and interior modules, industrial sensor conditioning with analog front-end digitization, and functional-safety-related sensor interfaces. The 14-pin PDIP package simplifies breadboard prototyping and through-hole repair scenarios. When designing with this part, choose the internal 32MHz HFINTOSC to minimize external component count and BOM cost; reserve the external oscillator pin only when USB or precise-timing peripherals require it. Confirm pin count against the chosen variant (PIC16F18424 for 8-pin, PIC16F18425 for 14-pin, PIC16F18426 for 20-pin) before laying out the PCB footprint. This page synthesizes distributor pricing, drop-in alternatives from the PIC16F184xx family, and practical design notes that are not available on the manufacturer product page alone.

طلب عرض سعر اتصل بنا
PIC16F18425-E/SL - 14KB Flash 8-bit MCU 32MHz XLP | Microchip
PIC16F18425-E/SL

PIC16F18425-E/SL - 14KB Flash 8-bit MCU 32MHz XLP | Microchip

The Microchip Technology PIC16F18425-E/SL is an 8-bit PIC microcontroller from the PIC16(L)F184xx family with 14KB (8K x 14) of Flash program memory, 1KB of RAM, and 32MHz internal oscillator speed, housed in a 14-pin SOIC (SL) package. What is a PIC 8-bit microcontroller? A PIC microcontroller is a programmable integrated circuit based on Microchip's proprietary Harvard-architecture 8-bit CPU core. PIC MCUs integrate Flash program memory, SRAM data memory, and a rich set of Core Independent Peripherals (CIPs) into a single chip. They sit within the broader category hierarchy of microcontroller -> embedded controller -> programmable logic device -> semiconductor. PIC microcontrollers are widely used across consumer, industrial, automotive, and IoT applications because they combine deterministic real-time behavior, low power consumption, and a mature MPLAB development toolchain. Key features of the PIC16F18425-E/SL include eXtreme Low Power (XLP) technology, a 12-bit ADC with computation (ADCC), two PWM modules, a 5-bit/8-bit DAC, comparators, Complementary Waveform Generator (CWG), and serial communication via EUSART, SPI, and I2C. The part operates across 1.8V to 5.5V supply and is rated -40C to +125C industrial extended temperature range. The PIC16F18425 utilizes Microchip's enhanced mid-range 8-bit CPU core with a 14-bit instruction word, 16-level hardware stack, and 32MHz internal oscillator. Core Independent Peripherals such as the CWG and the ADCC can operate without CPU intervention, reducing firmware complexity and enabling deterministic analog and waveform generation tasks. The XLP technology delivers nanoWatt sleep currents below 100nA typical, supporting battery-powered designs. Typical applications include battery-powered IoT sensor nodes, low-power remote controls, HVAC thermostat controls, small motor control drivers, LED lighting controllers, and general-purpose embedded logic replacements. The 14-SOIC footprint and XLP characteristics make this device attractive for compact, energy-conscious designs. When designing with this device, ensure decoupling capacitors (100nF plus 1uF bulk) are placed close to VDD. Verify the configuration bits via C/C++ to set oscillator source, watchdog behavior, and code protection. Use the MPLAB X IDE and XC8 compiler for code development and debugging with tools like PICkit 4 or ICD 4. This page synthesizes distributor pricing, parametric data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا
PIC16F18425-E/ST - 8-bit MCU, 14KB Flash, 32MHz XLP | Microchip
PIC16F18425-E/ST

PIC16F18425-E/ST - 8-bit MCU, 14KB Flash, 32MHz XLP | Microchip

The Microchip Technology PIC16F18425-E/ST is an 8-bit PIC® microcontroller in the PIC16(L)F184xx family, featuring 14KB (8K x 14) of Flash program memory, 1KB of RAM, and a 32MHz internal oscillator, housed in a 14-pin TSSOP (ST) package. It integrates high-resolution analog peripherals, Core Independent Peripherals (CIPs), and eXtreme Low-Power (XLP) technology for general-purpose and battery-powered applications. The device supports Functional Safety (FuSa) features that simplify IEC 61508 SIL-3 capable system designs. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data bus, optimized for deterministic real-time control with low power consumption, small die size, and low cost. PIC microcontrollers use a RISC-based Harvard architecture where the program memory bus is separate from the data memory bus, enabling most instructions to execute in a single clock cycle. Within the broader hierarchy, the PIC16F18425 belongs to PIC16F1xxx enhanced mid-range core MCUs -> 8-bit PIC microcontrollers -> Microcontrollers -> Integrated Circuits -> Semiconductors. Key features include 2x PWMs, a hardware 12-bit ADC with computation (ADCC), a 5-bit DAC, comparators, CWG (Complementary Waveform Generator), and communication peripherals (EUSART, SPI, I2C). The integrated 12-bit ADCC automates averaging, oversampling, and threshold-based decision making without CPU intervention, which is critical for sensor signal chains and motor control loops. XLP technology provides deep sleep modes with sub-microamp current draw. The architecture pairs a 32MHz internal oscillator (8MHz with 4x PLL) with 49 instructions including hardware multiply. The 14-pin TSSOP footprint gives designers access to 12 I/O pins while occupying only 5.0mm x 4.4mm of board area, with an industrial -40C to +125C operating range. Memory partitioning includes a 256-byte data EEPROM and 1KB SRAM. Typical applications include consumer appliance control, IoT sensor nodes, battery-powered handheld instruments, LED lighting controllers, and industrial sensor interfaces. The combination of CIPs and XLP also suits remote controls and wearable health monitors where deterministic response and low quiescent current are both required. When designing with this MCU, prioritize pin assignment for the dedicated I2C/SPI/EUSART pins to avoid remapping latency. For ADC accuracy, place a 0.1uF decoupling capacitor adjacent to each power pin and follow the datasheet reference layout for the analog AVSS/AVDD pair to minimize digital switching noise coupling. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا
PIC16F18425-I/JQ - 14KB Flash 8-bit MCU | Microchip UQFN-16
PIC16F18425-I/JQ

PIC16F18425-I/JQ - 14KB Flash 8-bit MCU | Microchip UQFN-16

The Microchip Technology PIC16F18425-I/JQ is an 8-bit RISC microcontroller from the PIC16(L)F184xx family, featuring a PIC16 CPU core running at up to 32 MHz, 14.336 KB of Flash program memory, 1 KB of data RAM, and 256 bytes of data EEPROM. It is housed in a compact 16-pin UQFN (UQFN-16-EP, 4x4 mm) package with an exposed thermal pad, enabling dense PCB layouts for space-constrained designs. An 8-bit microcontroller (MCU) is a single-chip processor that integrates a CPU, non-volatile program memory (Flash), volatile working memory (RAM), and peripheral interfaces on a single die. Within the broader semiconductor taxonomy, an 8-bit MCU sits below 32-bit Cortex-M MCUs in computational throughput but excels in deterministic interrupt response, low power consumption, and BOM cost. The PIC16F18425 belongs to the eXtreme Low Power (XLP) family, optimized for battery-powered and energy-harvesting applications. Key features include a 12-bit Analog-to-Digital Converter with Computation (ADCC), a 5-bit DAC, two PWM modules, a Comparator, Complementary Waveform Generator (CWG), EUSART, SPI, and I2C interfaces. The on-chip Core Independent Peripherals (CIPs) handle tasks such as signal conditioning and waveform generation without CPU intervention, reducing firmware complexity and power consumption. Operating voltage spans 1.8 V to 3.6 V (L-suffix variant) or 2.3 V to 5.5 V (F-suffix variant), with sleep current below 50 nA typical. Architecturally, the PIC16F18425 uses a 14-bit instruction word RISC core with hardware stack and Peripheral Pin Select (PPS) for flexible pin mapping. The CWG peripheral can synthesize complementary PWM outputs with programmable dead-band for half-bridge driver control, eliminating external timing components in motor-drive and Class-D audio front-ends. Typical applications include IoT sensor nodes, battery-powered wearables, low-cost motor control (fans, pumps, small BLDCs), LED lighting controllers, and consumer appliances. Its 1 KB RAM and 14 KB Flash are well matched to protocols such as LIN, Modbus RTU, and SMBus slave stacks. Design tip: route the exposed pad (EP) to a continuous ground copper pour with multiple thermal vias to achieve the rated thermal performance; floating EPs degrade ADC accuracy and long-term reliability in high-vibration environments. This page synthesizes distributor pricing, drop-in PIC16F184xx siblings, and practical design notes not found in the manufacturer datasheet, providing engineers with a curated comparison reference.

طلب عرض سعر اتصل بنا
PIC16F18425-I/P - 8-Bit 32MHz 14KB Flash XLP MCU | Microchip
PIC16F18425-I/P

PIC16F18425-I/P - 8-Bit 32MHz 14KB Flash XLP MCU | Microchip

The Microchip Technology PIC16F18425-I/P is an 8-bit PIC® XLP™ microcontroller with 32 MHz CPU speed, 14 KB (8K x 14) Flash program memory, 1 KB RAM, and a 14-pin PDIP (through-hole) package. It is part of the PIC16(L)F184xx full-featured low-pin-count family that pairs Core Independent Peripherals (CIPs) with eXtreme Low-Power (XLP) technology. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a rich set of peripheral blocks. Within the broader taxonomy, MCUs sit inside microcontrollers (integrated circuits), then semiconductors, and are the central building block of nearly every embedded electronic product. The 8-bit PIC core uses a RISC-style Harvard architecture and is one of the longest-lived and most broadly deployed MCU architectures in industry. Key features of the PIC16F18425 include a 12-bit ADCC (Analog-to-Digital Converter with Computation), a 5-bit DAC, two PWMs, a Comparator, a Complementary Waveform Generator (CWG), and serial interfaces including EUSART, SPI, and I2C. Functional Safety (FuSa) features are documented for safety-critical applications. The wide 2.5V/3.3V/5V operating range and XLP sleep currents in the nanoampere range make the device well suited to battery-powered and energy-harvesting designs. The device uses Microchip's enhanced mid-range 8-bit core with a 14-bit instruction word. Internal peripherals such as the CWG, PWMs, and configurable logic cells can operate without CPU intervention, reducing firmware complexity and active-mode power. The integrated 12-bit ADCC automates averaging, oversampling, and threshold comparisons, eliminating many external analog components and shortening firmware development. Typical applications include IoT sensor nodes, battery-powered home automation, low-power wireless sensor transmitters, HVAC control panels, consumer white-goods user interfaces, and industrial sensor readout boards. The 14-pin PDIP form factor is favored for hobbyist projects, breadboarding, and through-hole assembly in low-volume production. When designing with the PIC16F18425, use MPLAB X IDE with the XC8 compiler and program/debug with a PICkit™ 4 or Snap debugger. Configure unused pins as outputs and connect VDD/VSS to properly decoupled rails. For lowest sleep current, disable unused peripherals via firmware. This page synthesizes distributor pricing, drop-in alternatives from Microchip's PIC16F18424/18426 family, and practical low-power design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا
PIC16F18425-I/ST - 8-Bit 32MHz 14KB Flash MCU | Microchip | TSSOP-14
PIC16F18425-I/ST

PIC16F18425-I/ST - 8-Bit 32MHz 14KB Flash MCU | Microchip | TSSOP-14

The Microchip Technology PIC16F18425-I/ST is an 8-bit PIC microcontroller from the PIC16(L)F184xx family, featuring a 32MHz CPU, 14KB (8K x 14) of Flash program memory, and 1KB of RAM in a 14-pin TSSOP package. It integrates Core Independent Peripherals (CIPs), eXtreme Low-Power (XLP) technology, and Functional Safety (FuSa) features for general-purpose and low-power embedded designs. The industrial temperature grade (-40C to +85C) and the I/ST TSSOP-14 footprint make it a drop-in choice for compact, power-sensitive applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, volatile data memory, and peripherals into one package. The PIC16F18425 belongs to the PIC16 mid-range family and sits within the broader Microchip 8-bit PIC taxonomy (8-bit MCU -> PIC16 mid-range -> PIC16F184xx -> enhanced mid-range core). These devices execute one instruction per cycle using a RISC architecture optimized for deterministic real-time control and low power consumption. Key features of the PIC16F18425-I/ST include: 32MHz internal oscillator (8MHz with 4x PLL), 14KB Flash with self-programmability, 1KB SRAM, 256 bytes of EEPROM, a 12-bit Analog-to-Digital Converter with Computation (ADCC), a 5-bit DAC, two PWMs, a Comparator, a Complementary Waveform Generator (CWG), EUSART, SPI, and I2C peripherals. The device supports 1.8V to 5.5V operation and includes the nanoWatt XLP sleep modes that draw as little as 30 nA in sleep with the Real-Time Clock active. Architecturally, the PIC16F18425 uses an enhanced mid-range 8-bit core with a 14-bit instruction word, hardware multiplier, and direct/interrupt-driven CIPs that offload tasks like signal generation, waveform measurement, and communication from the CPU. The 12-bit ADCC integrates averaging, filtering, threshold detection, and auto-conversion triggers, reducing firmware overhead for sensor acquisition loops. Functional Safety (FuSa) features support IEC 61508 SIL 1/2 capable designs in industrial control systems. Typical applications include battery-powered IoT sensor nodes, consumer appliance control, LED lighting drivers, low-end motor control, battery chargers, and industrial sensor interfaces. The XLP technology suits remote controls, wearables, and energy-harvesting devices where quiescent current is critical. When designing with this MCU, ensure decoupling capacitors (100nF and 10uF) are placed close to VDD/VSS, reserve the ICSP programming pins (ICSPCLK/ICSPDAT), and configure the configuration words for the chosen oscillator, watchdog, and code protection settings. Use the MPLAB X IDE with the XC8 compiler for firmware development. This page synthesizes distributor pricing, drop-in alternatives within the TSSOP-14 footprint, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا
PIC16F18426-E/JQ - 8-Bit 32MHz 28KB Flash XLP MCU | Microchip
PIC16F18426-E/JQ

PIC16F18426-E/JQ - 8-Bit 32MHz 28KB Flash XLP MCU | Microchip

The Microchip Technology PIC16F18426-E/JQ is an 8-bit microcontroller from the PIC16(L)F184xx family featuring XLP (eXtreme Low Power) technology and Functional Safety (FuSa) capability, running at up to 32 MHz with 28 KB (16K x 14) of Flash program memory and packaged in a 16-pin UQFN (4x4 mm) with exposed thermal pad. It integrates 2 KB of RAM, a 12-bit Analog-to-Digital Converter with Computation (ADCC), a 5-bit Digital-to-Analog Converter (DAC), two PWMs, a Comparator, Complementary Waveform Generator (CWG), and configurable logic cells alongside EUSART, SPI, and I2C communication peripherals. An 8-bit microcontroller (MCU) is a compact computing engine that integrates a CPU, RAM, program memory, and peripherals on a single silicon die. PIC microcontrollers from Microchip use a modified Harvard RISC architecture optimized for deterministic real-time control. Within the broader taxonomy, the PIC16F18426 sits as an 8-bit MCU -> microcontroller -> embedded controller -> semiconductor IC. XLP variants add power-saving modes (sleep currents in the nanoamp range) suited to battery-powered end equipment. Key features of the PIC16F18426 include 28 KB Flash with device-level data EEPROM emulation, 2 KB SRAM, a 12-bit ADCC supporting automated averaging and filtering, hardware limit timers, a Zero-Cross Detect (ZCD) module, an on-chip temperature indicator, a Fixed Voltage Reference (FVR), and Core Independent Peripherals (CIPs) that offload tasks from the CPU. The integrated CWG simplifies complementary PWM generation for half-bridge and full-bridge power stages. Operating from 1.8 V to 5.5 V, the PIC16F18426 supports industrial temperature ranges (-40C to +125C), nanopower sleep modes, and rich interrupt-driven I/O. The 16-UQFN package footprint is well suited to compact IoT nodes, sensor conditioning, and consumer appliances where board area is constrained and pin count above 14 is acceptable. Typical applications include IoT sensor nodes, battery-powered remote controls, LED lighting controllers, low-power wireless companion MCUs, small appliance controls, and safety-critical embedded systems. The combination of XLP sleep currents, integrated analog, and Functional Safety features makes the device especially attractive for portable and always-on designs. When designing with this MCU, use Microchip's MPLAB X IDE with XC8 compiler and ensure decoupling capacitors are placed within 3 mm of the VDD pin to maintain ADC accuracy in mixed-signal layouts.

طلب عرض سعر اتصل بنا
PIC16F18426-E/P - 8-bit 32MHz XLP MCU 28KB Flash 14-PDIP
PIC16F18426-E/P

PIC16F18426-E/P - 8-bit 32MHz XLP MCU 28KB Flash 14-PDIP

The Microchip Technology PIC16F18426-E/P is an 8-bit PIC microcontroller from the PIC16(L)F184xx family, offering 28KB of Flash program memory and 2KB of SRAM in a 14-pin PDIP through-hole package. The device operates at up to 32MHz with a 16K x 14 program memory organization, integrates Functional Safety (FuSa) features, and is built on eXtreme Low-Power (XLP) technology for energy-constrained applications. An 8-bit microcontroller (MCU) is a small computer-on-a-chip that combines an 8-bit CPU core, program memory (Flash/ROM), peripherals (ADC, timers, communication interfaces), and RAM on a single die. PIC MCUs sit within the broader hierarchy of embedded microcontrollers -> microprocessors -> semiconductors, and are widely deployed where deterministic real-time control, low power, and small footprint dominate over raw compute throughput. Key features of the PIC16F18426-E/P include two PWM modules, a 12-bit ADCC (Analog-to-Digital Converter with Computation), a 5-bit DAC, a comparator, CWG (Complementary Waveform Generator), EUSART, and SPI/I2C interfaces. The integrated 12-bit ADC and Core Independent Peripherals (CIPs) allow sensor conditioning and timing-critical tasks to be handled in hardware without CPU load. The XLP technology targets typical run currents in the microamp range and deep-sleep currents in the nanoamp range. Architecturally, the part uses Microchip's enhanced mid-range 8-bit core with a hardware multiplier and a 14-bit instruction word. The 28KB Flash supports self-programming, and the device includes configurable logic cells (CLC), a peripheral pin select (PPS) for flexible signal routing, and an integrated temperature indicator useful for thermal compensation in sensor applications. Typical applications include low-power IoT sensor nodes, battery-powered remote controls, HVAC sensor interfaces, and consumer appliance control panels. The 14-pin PDIP package is favored for prototyping, hobby designs, and through-hole production where hand-soldering or socket-mounting is preferred. When designing with this device, mind the 14-pin count: many PIC16F18426 family members come in 20-pin packages, and migrating to fewer pins requires careful pin-function allocation. Always use the latest MPLAB XC8 compiler and verify the datasheet pinout for the specific suffix. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا
PIC16F18426-E/ST - 8-bit XLP MCU, 28KB Flash, 14-TSSOP | Microchip
PIC16F18426-E/ST

PIC16F18426-E/ST - 8-bit XLP MCU, 28KB Flash, 14-TSSOP | Microchip

The Microchip Technology PIC16F18426-E/ST is an 8-bit PIC microcontroller from the PIC16(L)F184xx family, featuring 28KB (16K x 14) of Flash program memory and 2KB of SRAM in a 14-pin TSSOP package. It operates at up to 32 MHz, integrates Core Independent Peripherals (CIPs) including a 12-bit ADCC with Computation, two PWMs, a Comparator, a 5-bit DAC, CWG (Complementary Waveform Generator), EUSART, and SPI/I2C interfaces, and is qualified for Functional Safety (FuSa) applications under the PIC XLP (eXtreme Low-Power) family umbrella. An 8-bit microcontroller (MCU) is a microprocessor core with an 8-bit data bus, typically paired with on-chip Flash, RAM, and peripherals. Within the broader taxonomy, an MCU belongs to microcontrollers (sub-category of integrated circuits), which themselves sit under the broader heading of embedded computing. PIC MCUs use a Harvard RISC architecture that runs one instruction per clock cycle, and the PIC16 mid-range family targets low-pin-count, low-power designs where code density and deterministic timing matter more than raw throughput. Key features of the PIC16F18426-E/ST include 256 bytes of EEPROM, 28-pin-count package with 12 I/O pins, deep-sleep current consumption in the nanoamp range (typical XLP figures under 50 nA with retention), a wide operating voltage range of 1.8V to 5.5V (F suffix), and support for the MPLAB X IDE with the XC8 compiler. The device also includes a configurable Logic Cell (CLC), numerically controlled oscillator (NCO), and zero-cross detection to offload tasks from the CPU. Architecturally, the device combines a mid-range 8-bit PIC core with the CIP ecosystem, allowing hardware-driven signal conditioning, waveform generation, and inter-peripheral connections without CPU intervention. This approach reduces firmware complexity and improves real-time determinism compared to software-loop-based designs. Typical applications include consumer IoT sensor nodes, battery-powered remote controls, low-power wireless sensor interfaces, LED lighting controllers, capacitive-touch human-interface nodes, and small appliances requiring Functional Safety compliance. The "E" temperature grade supports -40C to +125C operation for industrial environments. When designing with this part, configure the configuration words for the intended oscillator mode (HFINTOSC is typical for low-power) and verify the ADCC acquisition time matches the source impedance. For Functional Safety systems, consult the Microchip FMEDA and safety manual to ensure the diagnostic coverage matches the target SIL. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer product page, with all specifications traced back to verified sources.

طلب عرض سعر اتصل بنا
PIC16F18426-I/JQ - 8-bit XLP MCU, 28KB Flash, 16-UQFN | Microchip
PIC16F18426-I/JQ

PIC16F18426-I/JQ - 8-bit XLP MCU, 28KB Flash, 16-UQFN | Microchip

The Microchip PIC16F18426-I/JQ is a 32 MHz 8-bit PIC16 microcontroller with 28 KB (16K x 14) Flash program memory, 2 KB RAM, and a 12-bit Analog-to-Digital Converter with Computation (ADCC), housed in a 16-pin UQFN (4x4 mm) package. Part of the PIC16(L)F184xx XLP family, it integrates eXtreme Low-Power technology, Core Independent Peripherals (CIPs), and Functional Safety (FuSa) support for general-purpose and low-power embedded applications. An 8-bit microcontroller (MCU) is a programmable logic device that integrates a CPU, non-volatile program memory, volatile data memory, and peripherals on a single silicon die. PIC16 microcontrollers use a RISC-based Harvard architecture with a 14-bit instruction word, optimized for deterministic timing and low power. They occupy the product hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. The 'XLP' (eXtreme Low-Power) designation refers to Microchip's family of MCUs with deep-sleep currents under 1 microamp, suitable for battery-powered products. The device includes 28 KB Flash, 2 KB SRAM, 256 bytes EEPROM, a 12-bit ADCC with up to 11 channels, a 5-bit DAC, two PWM modules, a Comparator, a Complementary Waveform Generator (CWG), and communication peripherals including EUSART, SPI, and I2C. Core Independent Peripherals operate without CPU intervention, offloading tasks such as signal generation, conversion sequencing, and communication framing. The PIC16F18426-I/JQ operates from 2.3 V to 5.5 V across an industrial temperature range of -40C to +85C. Its XLP features enable sleep currents in the nanoamp range, supporting years of operation on a single coin cell. The 16-pin UQFN package suits compact PCB designs where board area is constrained. Typical applications include IoT sensor nodes, battery-powered remote controls, home automation peripherals, low-power wireless sensor hubs, LED lighting controllers, and small consumer appliances. Functional Safety features support safety-critical designs such as medical monitoring accessories and industrial sensor interfaces. When designing with this MCU, ensure adequate decoupling (100 nF + 1 uF) near VDD, leave the ICSP programming pins accessible for in-circuit debug, and verify the MCLR pin pull-up configuration matches the target application's reset behavior. Use Microchip's MPLAB X IDE with XC8 compiler for firmware development. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا
PIC16F18426-I/P - 8-bit XLP MCU, 28KB Flash, 32MHz, 14-PDIP | Microchip
PIC16F18426-I/P

PIC16F18426-I/P - 8-bit XLP MCU, 28KB Flash, 32MHz, 14-PDIP | Microchip

The Microchip Technology PIC16F18426-I/P is an 8-bit PIC16 microcontroller from the PIC16(L)F184xx family, integrating 28 KB of Flash program memory (16K x 14), 2 KB of SRAM, and a 32 MHz internal oscillator in a 14-pin PDIP through-hole package. It is rated for an industrial temperature range of -40C to +85C and operates from 1.8V to 5.5V. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable I/O peripherals on one die. The PIC16F18426 belongs to the 8-bit MCU category, which sits inside the broader hierarchy of microcontrollers -> embedded processors -> semiconductors. Compared with 16-bit and 32-bit MCUs, 8-bit parts such as this one trade compute throughput for deterministic instruction execution, very low power consumption, and a low BOM cost - ideal for high-volume sensor nodes and human-interface panels. Key features of this part include Core Independent Peripherals (CIPs) such as a 12-bit Analog-to-Digital Converter with Computation (ADCC), a 5-bit Digital-to-Analog Converter (DAC), two PWM modules, a Complementary Waveform Generator (CWG), a Comparator, and serial interfaces including EUSART, SPI, and I2C. Functional Safety (FuSa) capability supports IEC 61508 SIL-classified designs. The device uses a modified Harvard RISC architecture with a 14-bit instruction word and executes most instructions in one clock cycle. The eXtreme Low-Power (XLP) technology enables active current below 50 uA/MHz and sleep currents in the nanoampere range - critical for battery-powered products. Typical applications include low-power IoT sensor nodes, battery-backed household appliances, LED lighting controllers, motor-control loops, and human-interface panels with capacitive touch. A core design consideration is the 14-pin count: only 12 general-purpose I/O are exposed, so designers must plan pin budgeting carefully when adding EUSART, SPI/I2C, ADC, and PWM channels simultaneously. This page synthesizes distributor pricing, drop-in compatible Microchip siblings, and practical design notes that complement the manufacturer datasheet and the DigiKey/Mouser product listings.

طلب عرض سعر اتصل بنا
PIC16F18426-I/ST - 8-bit 32MHz 28KB Flash XLP MCU | Microchip
PIC16F18426-I/ST

PIC16F18426-I/ST - 8-bit 32MHz 28KB Flash XLP MCU | Microchip

The Microchip Technology PIC16F18426-I/ST is an 8-bit microcontroller from the PIC16(L)F184xx family, integrating 28 KB of Flash program memory, 2 KB of SRAM, and 256 bytes of EEPROM, all in a 14-pin TSSOP package. The device operates up to 32 MHz from a 1.8V to 5.5V supply range, supports the Functional Safety (FuSa) feature set, and includes Core Independent Peripherals (CIPs) plus eXtreme Low-Power (XLP) technology for energy-conscious designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a rich mix of analog and digital peripherals. The PIC16F18426 sits within the broader taxonomy of: microcontroller -> embedded MCU -> 8-bit MCU -> PIC16 family -> PIC16F184xx sub-family -> semiconductor. Its XLP designation indicates specialized low-power modes such as sleep currents below 1 uA, making it suitable for battery-powered applications. Key features include a 12-bit ADC with Computation (ADCC), a 5-bit DAC, two PWMs, a comparator, a Complementary Waveform Generator (CWG), an EUSART, plus SPI and I2C communication interfaces. The 32 MHz internal oscillator, 256 bytes of data EEPROM, and 12-bit Analog-to-Digital Converter deliver high-resolution signal acquisition in a compact TSSOP-14 footprint that fits tight PCB layouts. The device combines a RISC-based 8-bit PIC core with the CIP (Core Independent Peripheral) architecture. CIPs operate without CPU intervention, freeing the core for application logic while maintaining deterministic timing for waveform generation, signal conditioning, and communication tasks. The CWG and configurable logic cells (CLC) add flexibility for motor and lighting control. Typical applications include low-power IoT sensor nodes, consumer remote controls, HVAC thermostats, battery management sensor interfaces, automotive body electronics, and small appliances. The combination of 12-bit ADCC and XLP modes makes it well-suited for sensor aggregation in energy-harvesting systems. When designing with this MCU, ensure decoupling capacitors of 100 nF and 10 uF are placed near the VDD pin. The MCLR pin must be pulled high through a resistor for normal operation, or tied to VDD when not used. Programming is performed through the ICSP interface via PGC and PGD pins. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, giving engineers a single reference for component selection.

طلب عرض سعر اتصل بنا
PIC16F18426T-I/JQ - 28KB Flash 8-bit MCU, 32MHz, XLP | Microchip
PIC16F18426T-I/JQ

PIC16F18426T-I/JQ - 28KB Flash 8-bit MCU, 32MHz, XLP | Microchip

Microchip Technology PIC16F18426T-I/JQ is an 8-bit PIC microcontroller from the PIC16(L)F184xx family, featuring 28KB Flash program memory, 2KB SRAM, and a 32MHz internal core speed in a 16-pin UQFN (4x4) package. The "T" suffix indicates tape-and-reel packaging, "I" denotes the -40C to +85C industrial temperature grade, and "JQ" identifies the 16-UQFN 4x4 mm footprint. According to the manufacturer datasheet, the device integrates high-resolution analog peripherals, Core Independent Peripherals (CIPs), and eXtreme Low-Power (XLP) technology, making it suitable for general-purpose and energy-constrained embedded designs. An 8-bit microcontroller (MCU) is a compact processor that integrates a CPU, RAM, Flash program memory, peripherals, and I/O on a single silicon die. PIC microcontrollers use Microchip's enhanced mid-range RISC architecture, which executes one instruction per clock cycle (except branches), giving the PIC16F18426 effective throughput up to 32 MIPS. As a member of the voltage-regulator hierarchy, the MCU family sits above discrete logic and below SoC-class processors, and is widely deployed where low cost, deterministic behavior, and low power are required. Key features of the PIC16F18426 include a 12-bit ADC with computation (ADCC), a 5-bit DAC, two PWM modules, a comparator, a Complementary Waveform Generator (CWG), and communication peripherals including EUSART, SPI, and I2C. The device operates from 1.8V to 5.5V and supports XLP sleep currents down to the low nanoampere range. Functional Safety (FuSa) features assist designers building IEC 61508 or similar safety-related systems. On-board peripherals operate autonomously via the CIP architecture, reducing CPU overhead for tasks such as signal generation and motor control. The PIC16F18426 uses Microchip's enhanced mid-range core with a hardware multiplier and C compiler-friendly instruction set, supported by the MPLAB X IDE and XC8 toolchain. Internal oscillator accuracy is calibrated across voltage and temperature, and the device offers multiple clock sources from 32kHz to 32MHz, including a 32kHz Low-Power Internal Oscillator (LFINTOSC). Memory protection, code encryption, and a unique device ID are also included for IP security. Typical applications include IoT sensor nodes, home appliances, lighting controls, low-power wireless HMI front-ends, battery-powered handheld instruments, and small motor-control subsystems. Designers value this part for its compact UQFN footprint, robust analog integration, and the maturity of Microchip's PIC ecosystem. When designing with this device, ensure the UQFN-16 (JQ) thermal pad is soldered to a sufficient ground copper pour for heat dissipation, and follow Microchip AN2586 layout guidelines to minimize EMI on ADC and PWM traces.

طلب عرض سعر اتصل بنا