المتحكمات الدقيقة

المنتجات (20,000+)

PIC16F1933-I/ML - 7KB Flash 28-QFN 8-Bit MCU | Microchip
PIC16F1933-I/ML

PIC16F1933-I/ML - 7KB Flash 28-QFN 8-Bit MCU | Microchip

The Microchip Technology PIC16F1933-I/ML is an 8-bit Flash-based CMOS microcontroller built on the PIC16 enhanced mid-range core, packaged in a 28-pin QFN (ML, 6x6 mm) with an exposed thermal pad. It integrates 7 KB of Flash program memory (4K x 14 words), 256 bytes of SRAM, and 256 bytes of EEPROM data memory. The device runs at instruction-cycle speeds up to 32 MHz (8 MIPS) from a 1.8 V to 5.5 V supply, making it a member of Microchip's nanoWatt XLP extreme-low-power family. What is a PIC16 microcontroller? The PIC16 family is a family of 8-bit RISC microcontrollers from Microchip Technology with a Harvard architecture, separate program and data buses, and a small instruction set optimized for deterministic execution in embedded control. The PIC16F1933 adds an integrated LCD driver (up to 96 segments), a 5-bit DAC, multiple enhanced capture/compare/PWM (ECCP) modules, and configurable logic cells (CLC) on top of the standard PIC16 peripherals. It sits inside the broader PIC mid-range taxonomy: PIC10/12/16/18 -> 8-bit MCU -> microcontroller -> embedded processing -> semiconductor IC. Key features include 11 channels of 10-bit ADC, two comparators, two 8-bit timers plus one 16-bit timer, hardware RTCC, an EUSART, MSSP (I2C/SPI), and an internal 16 MHz oscillator. XLP technology delivers typical sleep currents around 50 nA at 1.8 V, enabling battery-powered designs with multi-year lifetimes. The 28-QFN (6x6 mm) package supports compact board layouts and provides a low thermal-resistance path via the exposed pad. Typical applications include battery-powered consumer devices with LCD user interfaces, IoT sensor nodes, metering and instrumentation, medical monitors, and industrial HMI panels. The integrated LCD driver eliminates external segment-driver ICs, reducing both BOM cost and PCB area in user-interface-heavy designs. When designing with this part, observe the 1.8 V minimum VDD for Flash operation, place a 0.1 uF decoupling capacitor adjacent to each power pin, and connect the exposed pad to the ground plane for thermal dissipation and electrical reference. The CLC, ECCP, and 5-bit DAC peripherals are configured via MPLAB X IDE and MCC. This page synthesizes distributor pricing, verified pin-compatible drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا
PIC16F1933-I/SO - 8-bit XLP MCU, 7KB Flash, 28-SOIC | Microchip
PIC16F1933-I/SO

PIC16F1933-I/SO - 8-bit XLP MCU, 7KB Flash, 28-SOIC | Microchip

The Microchip Technology PIC16F1933-I/SO is an 8-bit enhanced mid-range PIC16 flash microcontroller with 7 KB of program memory, 256 bytes of RAM, and 256 bytes of EEPROM, packaged in a 28-pin 300-mil SOIC (SO) outline. It operates from 1.8 V to 5.5 V across an industrial temperature range of -40 °C to +85 °C and executes instructions at a 200 ns cycle time from an internal 32 MHz oscillator. According to the manufacturer datasheet, the device integrates nanoWatt XLP extreme-low-power technology with active current below 6 µA/MIPS, sleep current in the nA range, and a dedicated LCD driver that can drive up to 4 commons × 28 segments without external bias resistors. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, timers, communication peripherals, and I/O onto one silicon die. Within Microchip's taxonomy, the PIC16F1933 sits inside the enhanced mid-range PIC16F193x/194x family, which itself falls under the broader 8-bit PIC microcontroller category, then under the microcontroller product line, then under Microcontrollers & Microprocessors, and finally under Integrated Circuits. This hierarchical position explains why the part is widely used as a drop-in upgrade for legacy PIC16F877A and PIC16F886 designs. Key features include an integrated LCD driver supporting static, 1/2, 1/3, and 1/4 multiplex displays, a 10-bit ADC with up to 17 channels, two Capture/Compare/PWM (CCP) modules, an Enhanced USART, MSSP for SPI and I²C, five 8-bit timers plus one 16-bit timer, and a charge time measurement unit (CTMU) for capacitive touch and basic temperature measurement. The CTMU, combined with mTouch firmware, lets engineers add touch-sensing buttons without an external controller IC. Architecturally, the device uses a Harvard RISC core with separate program and data buses, allowing instruction fetch and operand read on the same cycle. The XLP nanoWatt technology implements multiple idle, sleep, and doze modes with peripheral clock gating so that typical real-world current draw for a battery-driven LCD keypad application can stay below 5 µA average at 3 V. Typical applications include battery-powered LCD keypads for security and HVAC panels, low-cost industrial timers and counters with character LCDs, metering and sensor front-ends using the 10-bit ADC plus CTMU, consumer appliances such as rice cookers and washing-machine front panels, and portable medical devices like blood-pressure monitors. The wide 1.8 V-5.5 V range lets a single SKU cover both 3.3 V and 5 V designs. When laying out a board, route the VDD/VSS pairs with star topology and place the 100 nF decoupling capacitor within 3 mm of each power pin; on 28-pin SOIC designs, only one VDD/VSS pair exists, but the AVDD/AVSS analog supply still benefits from a 10 nF plus 100 nF pair near the ADC inputs. Do not leave the MCLR pin floating; tie it to VDD through a 10 kΩ resistor to ensure reliable reset behaviour. This page combines distributor pricing, drop-in PIC16F193x same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet itself.

طلب عرض سعر اتصل بنا
PIC16F1933-I/SP - 7KB Flash 8-bit MCU 28-SPDIP | Microchip
PIC16F1933-I/SP

PIC16F1933-I/SP - 7KB Flash 8-bit MCU 28-SPDIP | Microchip

The Microchip Technology PIC16F1933-I/SP is a 28-pin 8-bit flash-based CMOS microcontroller from the PIC® XLP™ 16F family, featuring 7KB (4K x 14 words) of program Flash memory, 256 bytes of RAM, and 256 bytes of EEPROM, and is offered in a 28-SPDIP (Skinny Plastic DIP) through-hole package. It operates across a wide 1.8V to 5.5V supply range with internal oscillator accuracy to within 1% across that range, supporting industrial -40°C to +85°C operation as indicated by the 'I' temperature grade. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data path, on-board program memory, RAM, and integrated peripherals such as timers, ADC, and communication interfaces. MCUs sit within the broader category of embedded microcontrollers, which are subclasses of microprocessors with self-contained memory and I/O. The PIC16F1933 belongs to Microchip's XLP (eXtreme Low Power) family, which also nests under low-power MCUs, microcontrollers, embedded controllers, and finally semiconductors in the device taxonomy. Key features include a 32MHz internal oscillator, integrated LCD driver supporting up to 96 segments, 11 channels of 10-bit ADC, multiple Enhanced USART, I²C, and SPI serial interfaces, and nanoWatt XLP technology for sub-microamp sleep currents. The device includes up to 25 I/O pins, four 8-bit timers plus one 16-bit timer, and a Capture/Compare/PWM module suitable for motor and lighting control. Architecturally, the PIC16F1933 uses a RISC instruction set with 49 instructions, hardware stack, and a 14-bit instruction word. Its nanoWatt XLP technology enables sleep currents below 1 µA, making the device suited for battery-powered and energy-harvesting designs. The integrated LCD driver eliminates an external charge-pump or segment-driver ASIC in glass-display applications. Typical applications include industrial control panels with character LCDs, consumer white goods with user interfaces, low-power sensor nodes, HVAC thermostats, and battery-powered instruments. The wide voltage range and integrated peripherals allow designers to consolidate multiple discrete components into a single chip. When designing with the PIC16F1933, ensure that programming voltage and MCLR pin handling follow the datasheet's in-circuit serial programming procedure. Use a decoupling capacitor within 5mm of each VDD/VSS pair, and keep the 32kHz or high-frequency crystal traces short to minimise EMI. This page synthesises distributor pricing, drop-in alternatives, and engineering design notes that complement the manufacturer datasheet, giving procurement and design engineers a single reference for evaluation and sourcing.

طلب عرض سعر اتصل بنا
PIC16F1933-I/SS - 8-Bit 32MHz 7KB Flash XLP MCU | Microchip
PIC16F1933-I/SS

PIC16F1933-I/SS - 8-Bit 32MHz 7KB Flash XLP MCU | Microchip

The Microchip Technology PIC16F1933-I/SS is a nanoWatt XLP eXtreme Low-Power 8-bit PIC microcontroller built on a CMOS process with a 32 MHz internal oscillator and 7 KB (4K x 14) of self-programmable Flash program memory. Housed in a 28-pin SSOP package with 0.65 mm terminal pitch, it integrates 256 bytes of RAM, 256 bytes of EEPROM, and an integrated LCD driver, delivering high analog and digital integration in a small-footprint surface-mount form factor. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, non-volatile storage, and a rich set of peripherals (timers, ADC, communication interfaces, GPIO) into one IC. Within the broader semiconductor hierarchy, the PIC16F1933 belongs to the 8-bit microcontroller category, which sits inside the embedded controller family, itself a branch of microcontrollers and microprocessors in the integrated-circuit taxonomy. The 'XLP' designation places this part in Microchip's nanoWatt XLP low-power lineage, optimized for battery-operated and energy-harvesting designs. Key features of the PIC16F1933 include 25 digital I/O lines (some sources state 12 I/O pins depending on package option; the 28-pin SSOP exposes 25), 11 channels of 10-bit ADC, an integrated LCD driver capable of driving segment LCDs directly, multiple timers, an EUSART, MSSP (SPI/I2C), and a wide 1.8V-5.5V supply range (industrial variant) that allows direct Li-ion battery operation. The integrated LCD segment driver eliminates the need for an external charge-pump or driver IC, reducing BOM cost for metering and appliance front panels. Architecturally, the part uses the standard enhanced mid-range PIC16 core with a 14-bit instruction word and a hardware stack, plus the nanoWatt XLP sleep modes (deep sleep, idle, doze) that drop the active current to roughly 50 nA in deep sleep with RTCC and WDT running. The 32 MHz internal oscillator provides 8 MIPS performance, adequate for sensor sampling, user-interface handling, and low-speed communication tasks typical of metering, white goods, and consumer gadgets. Typical applications include water/gas/electricity metering with LCD readout, household appliances (washing machines, microwave ovens, induction cooktops), battery-powered sensor nodes, consumer electronics with segment LCD displays, and industrial control panels. The integrated LCD driver makes it particularly attractive for metering and appliance UI where a low BOM is essential. A secondary use case is replacing legacy PIC16F886 designs with a more capable pin-compatible upgrade that adds LCD support. When designing with this device, follow Microchip's recommended 100 nF bypass capacitor on VDD placed within 4 mm of the pin, and a 10 kΩ pull-up on MCLR if in-circuit serial programming is required. Avoid routing high-frequency switching traces adjacent to the LCD segment pins to minimize ghosting. Pin-compatible migration paths exist within the PIC16F193x family for design flexibility across memory sizes and packages. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not consolidated in any single manufacturer document, providing engineering teams with a single-source decision aid for the PIC16F1933-I/SS.

طلب عرض سعر اتصل بنا
PIC16F1933T-I/SO - 7KB Flash 8-bit MCU, 28-SOIC | Microchip
PIC16F1933T-I/SO

PIC16F1933T-I/SO - 7KB Flash 8-bit MCU, 28-SOIC | Microchip

The Microchip Technology PIC16F1933T-I/SO is an 8-bit CMOS flash microcontroller in the PIC16F family with 7KB (4K x 14) of program Flash memory, 256 bytes of SRAM and 256 bytes of EEPROM, housed in a 28-pin SOIC package. The device executes instructions at a 200 ns cycle time from an internal oscillator that supports up to 32 MHz operation, and is specified for the industrial temperature range (-40C to +85C). A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals and I/O into one package. PIC microcontrollers are 8-bit RISC Harvard-architecture devices from Microchip with a rich toolchain and a long product lifecycle. The PIC16F1933 belongs to the enhanced mid-range family, sits inside the broader power-management IC hierarchy, and is part of the PIC16F1xxx series that adds LCD driver support and nanoWatt XLP extreme-low-power technology. Key features include 14-bit instruction width, an integrated LCD driver (up to 28 segments), a 10-bit ADC with up to 11 channels, multiple PWM modules, comparators and the nanoWatt XLP sleep mode that drops quiescent current to the sub-microamp range. The 28-SOIC (SO) industrial grade (-I) package and tape-and-reel (T) shipping format target production-friendly assembly. Typical applications include battery-powered consumer and home appliances with glass displays, e-metering, sensor conditioning front-ends, small appliances, white goods and any low-power embedded system that benefits from an on-chip LCD driver. The wide operating voltage range (1.8 V to 5.5 V) and the XLP idle/sleep modes make the device particularly well suited to energy-harvesting or primary-cell designs that must wake periodically to take a measurement and return to deep sleep. A common design pitfall is forgetting to switch the device to the internal LFINTOSC or to configure the System Clock Selector (SCS) before issuing a SLEEP instruction, which can leave the part drawing extra current through a still-running external oscillator. Always verify the CONFIG1 register clock source bits in MPLAB X before characterising sleep current. This page synthesises distributor pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet, giving an engineer a single reference point for evaluating PIC16F1933T-I/SO against contemporary 28-pin PIC and competing 8-bit MCUs.

طلب عرض سعر اتصل بنا
PIC16F1934-E/ML - 8-bit PIC XLP MCU 7KB Flash 32MHz QFN-44 | Microchip
PIC16F1934-E/ML

PIC16F1934-E/ML - 8-bit PIC XLP MCU 7KB Flash 32MHz QFN-44 | Microchip

The Microchip Technology PIC16F1934-E/ML is an 8-bit PIC16 microcontroller built on Microchip's enhanced mid-range core and housed in a 44-pin QFN (8x8 mm) package with exposed pad. The device provides 7 KB of Flash program memory (4K x 14 words), 256 bytes of SRAM, and 256 bytes of EEPROM data memory, while operating at up to 32 MHz internal clock from a 1.8 V to 5.5 V supply. What is an 8-bit PIC microcontroller? A PIC (Peripheral Interface Controller) microcontroller is a Harvard-architecture RISC device that integrates a CPU, non-volatile program memory, RAM, peripherals and I/O into a single chip. Within that hierarchy, the PIC16F1934 belongs to the PIC16 family -> mid-range 8-bit MCUs -> nanoWatt XLP extreme-low-power family -> 28/40/44-pin LCD-driver sub-family. PIC MCUs are widely used for compact, low-power embedded control in consumer, industrial and automotive applications. Key features include 32 MHz max CPU speed, 14-channel 10-bit ADC, on-chip LCD driver supporting up to 96 segments, multiple communication peripherals (EUSART, MSSP for SPI/I2C), up to 36 digital I/O pins, and nanoWatt XLP technology for sub-uA sleep currents. The integrated LCD driver eliminates the need for an external segment-driver IC, reducing both BOM cost and PCB area in segment-display designs. The PIC16F1934-E variant is specified for the -40C to +125C extended industrial/automotive temperature range, making it suitable for harsh-environment deployments. The 44-QFN package with exposed thermal pad delivers low thermal resistance and a compact 8x8 mm footprint for space-constrained boards. Typical applications include battery-powered sensor nodes with LCD readouts, consumer remote controls, industrial metering, home appliances with segmented displays, and small automotive body modules. The combination of low power, integrated LCD, and EEPROM makes it a strong fit for metering and handheld instruments. Design consideration: route the exposed pad (EP) to a solid ground plane for thermal and electrical performance; do not use the LCD charge pump output to drive backplanes larger than the datasheet-recommended panel capacitance without buffering. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا
PIC16F1934-E/MV - 7KB Flash, LCD, nanoWatt MCU | Microchip
PIC16F1934-E/MV

PIC16F1934-E/MV - 7KB Flash, LCD, nanoWatt MCU | Microchip

The Microchip Technology PIC16F1934-E/MV is an 8-bit CMOS flash microcontroller delivering 7KB of program memory, 256B of RAM, and 256B of EEPROM in a 40-pin UQFN (MV) package with exposed pad. It runs up to 32 MHz (8 MIPS) from a 2.5V to 5.5V supply, integrates an LCD driver with charge pump, and supports the nanoWatt XLP ultra-low-power family. An 8-bit microcontroller (MCU) is a small computing system on a single chip that contains a CPU, RAM, non-volatile program memory (Flash/ROM), and peripherals such as timers, ADC, communication ports, and GPIO. Within the broader taxonomy it sits under microcontroller -> embedded processor -> semiconductor. The PIC16F1934 belongs to the mid-range PIC16 family, optimized for ultra-low-power XLP applications such as battery-powered instruments, consumer white goods, and human-machine interfaces that need an integrated LCD glass driver. Key features include 12 I/O pins shared with LCD segments, an internal 32 MHz oscillator, 10-bit ADC with capacitive touch support (mTouch), multiple PWM/ECCP modules, and hardware Master Synchronous Serial Port (MSSP) for SPI/I2C. Per Microchip datasheet 40001591D, the device includes 256B EEPROM with 1M erase/write cycles endurance and supports ICSP (In-Circuit Serial Programming) for field updates. Active current is typically below 2 mA at 8 MHz, and sleep current drops to roughly 50 nA with LCD charge pump disabled. Architecturally, the PIC16F1934 uses a 14-bit instruction word RISC core with a hardware multiplier, providing deterministic single-cycle instruction execution. The integrated LCD driver supports up to 96 segments in multiplexed mode (1/4 duty, 1/3 bias) using an internal charge pump that can operate down to 2.5V without external boost components, simplifying display-based designs. Typical applications include battery-powered thermostats and sensor nodes, low-cost consumer appliances with LCD readouts, irrigation controllers, and any ultra-low-power product that needs an on-chip segmented display. The wide 2.5V-5.5V operating range lets a single coin cell or 2xAA supply power both logic and the display. Design with the integrated LCD charge pump to eliminate external boost circuitry, but verify segment count vs your glass - more than 96 segments requires the larger PIC16F1936/1937/1938/1939 variants.

طلب عرض سعر اتصل بنا
PIC16F1934-E/P - 7KB Flash 8-bit MCU, 32MHz, LCD, XLP | Microchip
PIC16F1934-E/P

PIC16F1934-E/P - 7KB Flash 8-bit MCU, 32MHz, LCD, XLP | Microchip

The Microchip Technology PIC16F1934-E/P is an 8-bit CMOS flash microcontroller belonging to the PIC16F193X/PIC16LF193X family with nanoWatt XLP extreme-low-power technology, housed in a 40-pin PDIP (P) through-hole package. It integrates 7 KB of flash program memory (4K x 14 words), 256 bytes of SRAM, and 256 bytes of EEPROM, and runs at instruction-cycle speeds up to 32 MHz (8 MHz internal oscillator with 4x PLL) across a 1.8 V to 5.5 V supply range. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and peripheral interfaces on one die. The PIC16F1934 belongs to the PIC16 mid-range family in the broader microcontroller taxonomy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. Its nanoWatt XLP technology adds an extreme-low-power sub-mode that drops active current below typical mid-range parts, making the device relevant in battery-powered segments. Key differentiating features include a segmented LCD driver (up to 96 segments), a 12-bit ADC with computation (ADC2) that automates averaging, filtering, threshold comparison, and oversampling, an 8-bit DAC, two comparators, capture/compare/PWM modules, an EUSART, MSSP (SPI/I2C), and up to 36 digital I/O pins with individually controllable internal weak pull-ups. The instruction set is 35 single-word instructions, all single-cycle except branches, and the part is supported by the MPLAB X IDE, XC8 compiler, and PICkit programmer/debugger tool chain. Architecturally, the PIC16F1934 uses a Harvard RISC core with separate program and data buses, allowing instruction fetch and operand access in the same cycle. The 14-bit instruction word packs opcode and operand into one fetch, the 16-level hardware stack limits nested calls, and on-chip oscillator calibration (factory trimmed to ±1%) removes external crystals in many designs. Typical applications include low-power LCD user-interface panels (thermostats, meters, appliances), battery-powered sensor transmitters, e-paper / segment LCD consumer products, white-goods control boards, and industrial sensor nodes that benefit from the ADC2 hardware-averaging. The wide 1.8-5.5 V supply tolerance suits both 3.3 V and 5 V rails without level translation. When designing with this part, reserve one I/O for in-circuit serial programming (ICSP) and another for the MCLR reset; both can be released to user code via configuration bits, but only after debugging is finished. The LCD charge pump allows display operation below the LCD threshold voltage but draws extra current, so disable it for non-LCD designs. This page combines distributor stock, drop-in PIC16 same-package alternatives, and practical design notes that go beyond what is printed in the manufacturer datasheet.

طلب عرض سعر اتصل بنا
PIC16F1934-I/ML - 8-bit MCU, 7KB Flash, LCD, XLP QFN-44 | Microchip
PIC16F1934-I/ML

PIC16F1934-I/ML - 8-bit MCU, 7KB Flash, LCD, XLP QFN-44 | Microchip

The Microchip PIC16F1934-I/ML is an 8-bit Flash-based CMOS microcontroller from the PIC16F193X/LF193X family, featuring 7 KB of Flash program memory, 256 bytes of RAM, and 256 bytes of EEPROM, housed in a 44-pin QFN (ML) package. It integrates an integrated LCD driver with up to 192 segments, runs at up to 32 MHz internal clock, and operates over a wide 1.8 V to 5.5 V supply range using Microchip's nanoWatt XLP extreme low-power technology. An 8-bit microcontroller (MCU) is a small, self-contained computing device built around an 8-bit data path, an ALU, on-chip program and data memory, and configurable peripherals such as timers, ADC, communication ports, and I/O pins. Within the broader semiconductor hierarchy, MCUs sit under microcontrollers -> embedded processors -> computing semiconductors. Microchip's PIC16 mid-range family is one of the most widely adopted 8-bit platforms, balancing deterministic instruction execution with extremely low sleep current for battery-driven designs. Key features include 14-bit wide instruction set with 49 instructions, 36 digital I/O pins (exposed on the ML package), a 5-bit DAC, a 10-bit ADC with up to 14 channels, multiple PWM modules, an EUSART, MSSP (SPI/I2C), and four 8-bit timers with two CCP modules. The nanoWatt XLP architecture delivers typical sleep currents below 100 nA, making this part well suited to always-on, energy-harvesting or coin-cell powered products. Technically, the device uses a Harvard architecture with separate program and data buses, allowing simultaneous fetch and access. The internal 32 MHz oscillator is factory calibrated and eliminates the need for an external crystal in many designs, reducing BOM cost and PCB area. The integrated LCD charge pump supports bias generation for static, 1/2, 1/3, and 1/4 multiplexed displays without external resistor ladders. Typical applications include low-power LCD-based consumer products such as thermostats, blood pressure monitors, metering displays, sensor readout panels, IoT edge nodes with small graphical displays, and industrial HMI panels. The combination of segmented LCD control, low sleep current, and ample I/O makes it ideal when a full graphical TFT controller would be overkill. When designing with the ML (QFN-44) variant, attention must be paid to the exposed center pad, which must be soldered to the PCB ground plane for thermal and electrical performance. Programming is supported through Microchip's MPLAB X IDE, XC8 compiler, and the PICkit or ICD debuggers, with a wide ecosystem of application notes and code examples available.

طلب عرض سعر اتصل بنا
PIC16F1934-I/P - 8-Bit 32MHz XLP Microcontroller | Microchip
PIC16F1934-I/P

PIC16F1934-I/P - 8-Bit 32MHz XLP Microcontroller | Microchip

The Microchip Technology PIC16F1934-I/P is an 8-bit PIC16-family RISC microcontroller with 7 KB of flash program memory, 256 bytes of data RAM, a 32 MHz maximum clock frequency, and a 40-pin PDIP package. It belongs to Microchip's extreme low-power XLP family and is designed for cost-sensitive embedded control applications requiring an LCD driver, flexible I/O, and low standby-current operation. A microcontroller is a programmable integrated circuit containing a processor core, program memory, data memory, peripherals, and input/output ports. The PIC16F1934-I/P belongs to the hierarchy of 8-bit MCU > PIC microcontroller > PIC16 family > XLP low-power microcontroller. This positioning makes it suitable for compact control systems that must combine readable firmware execution, dedicated display handling, and low quiescent current without the complexity and cost of a higher-bit-width processor. The device provides 7 KB of flash memory for firmware, 256 bytes of RAM, and 256 bytes of EEPROM according to its distributor product listing. Its maximum operating frequency is 32 MHz, while its listed operating voltage range is 1.8 V to 5.5 V. The flash-based architecture supports in-circuit programming and allows firmware to be updated in deployed equipment. An integrated LCD driver and up to 35 I/O lines provide useful interface capacity for measurement, display, and control functions. The PIC16F1934-I/P is a CMOS device from Microchip's XLP portfolio. XLP technology emphasizes low current consumption during active operation and sleep, making it useful for battery-operated instruments, panel controls, and metering equipment. The part's -40 °C to +125 °C industrial temperature capability supports operation across industrial environments, while its 40-pin PDIP package facilitates prototyping, inspection, and through-hole assembly. Typical uses include standalone LCD instruments, industrial control panels, energy meters, environmental monitors, and compact automation controllers. In an LCD meter, the MCU can acquire sensor data through its ADC, perform calculations, update the integrated LCD driver, and manage switches or alarm outputs. In a battery-powered monitor, XLP operating modes can reduce consumption during inactive periods while preserving fast execution when measurements are required. Designers should allocate decoupling close to the supply pins, route sensitive analog inputs away from switching and high-current traces, and confirm oscillator, reset, programming, and LCD segment connections against the manufacturer's pin-description table. Because the DIP package has generous spacing, prototype boards are straightforward, but production designs should account for its larger footprint compared with surface-mount packages. This page combines the manufacturer's device information with distributor specifications, application guidance, package considerations, and engineering-focused selection notes. It also distinguishes verified operating characteristics from parameters that require confirmation in the manufacturer datasheet, helping engineers plan firmware, PCB layout, and sourcing without relying on generic microcontroller assumptions.

طلب عرض سعر اتصل بنا
PIC16F1934-I/PT - 8-bit 32MHz 7KB Flash MCU | Microchip
PIC16F1934-I/PT

PIC16F1934-I/PT - 8-bit 32MHz 7KB Flash MCU | Microchip

The Microchip Technology PIC16F1934-I/PT is an 8-bit PIC16 enhanced mid-range microcontroller built on the nanoWatt XLP (eXtreme Low Power) platform, delivering up to 32 MHz CPU performance with 7 KB Flash program memory (4K x 14 words), 256 bytes of SRAM, and 256 bytes of EEPROM, housed in a 44-pin TQFP (10x10 mm) package. The 'I' suffix denotes the industrial temperature grade (-40C to +85C) and the /PT suffix indicates the TQFP-44 package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash/ROM), data memory (RAM), non-volatile storage (EEPROM), and programmable I/O peripherals on one die. PIC16F1934 belongs to the broader hierarchy: MCU -> 8-bit MCU -> PIC16 enhanced mid-range family -> nanoWatt XLP ultra-low-power family -> flash-based microcontrollers with LCD driver. XLP technology targets battery-powered applications by combining deep sleep currents in the order of tens of nA with multiple low-power operating modes and active mode currents around a few mA. Key features of the PIC16F1934-I/PT include a 12-channel 10-bit ADC, two 8-bit timers and three timers overall (Timer0, Timer1, Timer2), a hardware USART, MSSP supporting I2C and SPI, an integrated LCD driver (up to 36 segments typical for the family), internal 16 MHz and 32 kHz oscillators with PLL, multiple power-managed modes (Run, Idle, Sleep), and integrated capacitive mTouch sensing support. The device operates from 1.8 V to 5.5 V across the full industrial temperature range, which is well-aligned with 2xAA battery and 3.3 V / 5 V mixed-rail systems. Architecture-wise, the PIC16F1934 implements Microchip's enhanced mid-range 8-bit RISC core with 49 instruction word set, 16-level hardware stack, and deterministic 4-clock-per-instruction cycle (8 MHz internal = 2 MIPS per MHz). The 10-bit ADC supports up to 12 analog channels depending on package pin count. The 44-pin TQFP package exposes the maximum I/O and analog channel count for the family. Typical applications include battery-powered consumer products with LCD segments (thermostats, weighing scales, remote controls, electric toothbrushes), home appliances and white goods, sensor signal conditioning with mTouch capacitive touch buttons or sliders, low-end human-machine interface panels, and educational/hobbyist projects using PIC kit development tools. The combination of integrated LCD driver and XLP ultra-low-power is what differentiates this family from general-purpose PIC16 parts. When designing with this device, plan the in-circuit serial programming (ICSP) pins (typically ICSPCLK/ICSPDAT and MCLR/Vpp) so the part remains accessible on the PCB for firmware updates and debug. The integrated LCD charge pump can simplify designs by allowing low-voltage battery operation while still meeting Vlcd requirements for typical TN glass, but external resistor selection per the datasheet remains essential. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the standalone datasheet, so you can quickly evaluate this part against alternatives and decide if it is the right fit for your embedded design.

طلب عرض سعر اتصل بنا
PIC16F1934T-I/ML - 8-Bit 32MHz XLP MCU 7KB Flash 44-QFN | Microchip
PIC16F1934T-I/ML

PIC16F1934T-I/ML - 8-Bit 32MHz XLP MCU 7KB Flash 44-QFN | Microchip

The Microchip Technology PIC16F1934T-I/ML is an 8-bit flash-based CMOS microcontroller from the PIC16F193x family with nanoWatt XLP extreme-low-power technology, 7 KB (4K x 14) of program Flash, 256 bytes of RAM, and 256 bytes of EEPROM, packaged in a 44-pin QFN (8x8 mm) with exposed pad. It operates from 1.8 V to 5.5 V (the industrial "I" temperature grade spans -40 C to +85 C) and runs up to 32 MHz instruction rate from an internal oscillator. What is an 8-bit PIC microcontroller? A PIC microcontroller (Programmable Interface Controller) is a Harvard-architecture RISC processor family from Microchip Technology that integrates CPU core, Flash program memory, RAM, EEPROM, peripherals (timers, ADC, PWM, communication modules, I/O), and in this case an LCD segment driver, onto a single die. The PIC16F193x family sits in the PIC16 mid-range tier between the PIC10/12/16 baseline family and PIC18/dsPIC33 enhanced families, offering low cost, low power, and a generous peripheral mix including a built-in LCD driver that eliminates an external driver chip in display applications. Key features include 25 digital I/O pins (shared with segment and analog functions), a 10-bit ADC with up to 14 channels, multiple PWM modules, an integrated LCD driver supporting up to 96 segments, two 8-bit timers plus one 16-bit timer, an enhanced USART, an MSSP module for SPI and I2C (master/slave), nanoWatt XLP sleep currents below 1 uA in selected modes, an integrated voltage reference, and a low-power BOR/LVD. Architecturally the device uses a RISC Harvard core with single-cycle instruction decode (except branches) and a 14-bit instruction word; the Flash program memory supports self-programmability via ICSP and runs directly from the internal 32 MHz oscillator with no external crystal required for most designs. The LCD driver uses an internal charge pump and dedicated segment/common pins shared with GPIO, allowing common-glass LCDs (up to 4 common, 24 segment lines) to be driven without external bias resistors. Typical applications include battery-powered metering (gas, water, electricity), handheld thermometers and consumer appliances with LCD readout, IoT sensor nodes and remote controls, white-goods and HVAC user-interface panels, and automotive interior modules (cluster/trim displays). Designers favor this family for cost-sensitive products that need an integrated segmented display without an additional driver IC. Design tip: route the exposed pad (EP) of the 44-QFN to a continuous ground copper pour with multiple thermal vias for both electrical reference and thermal dissipation. The internal charge-pump capacitors for the LCD driver need a 1 uF X7R on the LCDCAP pin, and the segment lines require appropriate bias on VDD for stable contrast across the operating temperature range. This page combines manufacturer datasheet data with distributor pricing, drop-in alternatives from the same PIC16F193x family and pin-compatible PIC18/dsPIC cousins, and practical PCB-layout guidance you will not find in the standalone datasheet.

طلب عرض سعر اتصل بنا
PIC16F1934T-I/PT - 32MHz 8-bit MCU 7KB Flash LCD XLP | Microchip
PIC16F1934T-I/PT

PIC16F1934T-I/PT - 32MHz 8-bit MCU 7KB Flash LCD XLP | Microchip

The Microchip PIC16F1934T-I/PT is a 32 MHz 8-bit flash-based CMOS microcontroller with 7 KB of program memory, 256 bytes of SRAM and 256 bytes of EEPROM, housed in a 44-pin TQFP (10x10 mm) package. It operates from 2.3 V to 5.5 V across an industrial -40 °C to +85 °C temperature range, integrating nanoWatt XLP extreme-low-power technology, an integrated LCD driver and 36 I/O lines. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory and peripherals around an 8-bit data path. It sits within the broader taxonomy: microcontroller -> embedded processor -> semiconductor. PIC microcontrollers from Microchip use a RISC Harvard architecture optimized for deterministic interrupt response and ultra-low power consumption, making them dominant in cost-sensitive battery-powered and human-interface designs. Key features of this part include a 32 MHz internal oscillator, 14-channel 10-bit ADC, multiple PWM modules, hardware USART, SPI and I2C peripherals, an integrated LCD driver with charge pump, and nanoWatt XLP technology that holds sleep current below typical 50 nA levels. The 44-pin TQFP package exposes 36 general-purpose I/O lines plus dedicated oscillator and programming/debug pins. Architecturally, the device combines a 14-bit instruction word PIC core with a separate data bus for SRAM access, plus an on-chip 32 kHz oscillator for real-time-clock and watchdog operation. The integrated segmented-LCD driver can directly bias glass displays up to a defined segment count, eliminating external driver ICs and reducing BOM cost in metering and appliance panels. Typical applications include white-goods and appliance user interfaces with LCD panels, battery-powered sensor nodes, industrial meters, remote controls, and consumer devices requiring low standby power. The wide 2.3-5.5 V supply range also makes it tolerant of single-cell lithium, two-AA, USB and 5 V regulated rails. When designing with this MCU, allocate PCB area for the ICSP programming header, ensure the analog and digital grounds share a single point, and follow Microchip TB3013 layout guidelines for the analog supply pin. The 'T' suffix indicates tape-and-reel packaging for high-volume assembly. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the standalone manufacturer datasheet.

طلب عرض سعر اتصل بنا
PIC16F1936-E/MV - 14KB Flash LCD 8-bit MCU | Microchip
PIC16F1936-E/MV

PIC16F1936-E/MV - 14KB Flash LCD 8-bit MCU | Microchip

The Microchip Technology PIC16F1936-E/MV is an 8-bit PIC microcontroller featuring 14KB Flash program memory, 512B RAM, and an integrated LCD driver, housed in a 28-pin UQFN (4x4) package with exposed pad. Operating from 1.8V to 5.5V with a 32MHz internal oscillator, it belongs to the nanoWatt XLP (eXtreme Low Power) family that targets battery-powered and energy-harvesting applications. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data bus, integrating a CPU, Flash program memory, RAM, EEPROM, timers, ADC, and communication peripherals. The PIC16F1936 sits in the PIC16 mid-range family (PIC16 -> PIC mid-range -> 8-bit MCU -> microcontroller -> embedded processor -> semiconductor), using a RISC architecture with 49 instructions. The integrated LCD driver with charge pump supports up to 96 segments directly, eliminating the need for external LCD controller ICs in user-interface designs. Key features include 14KB (8K x 14 words) self-programmable Flash, 256B EEPROM, 25 digital I/O pins, 11-channel 10-bit ADC, two 8-bit timers, one 16-bit timer, enhanced PWM, MSSP (SPI/I2C), EUSART, and a real-time clock with calendar. The nanoWatt XLP technology delivers typical sleep currents below 1 µA with full RAM retention and watchdog timer operation, making the device suitable for applications that spend most of their time in standby. The PIC16F1936 implements a modified Harvard architecture with separate program and data buses, an 8-level hardware stack, and an instruction set optimized for C code generation through the XC8 compiler. The integrated mTouch capacitive-sensing peripheral and CTMU (Charge Time Measurement Unit) add touch-button and proximity-sensing capability without external components. Typical applications include battery-powered consumer devices with LCD displays, home automation sensor nodes, automotive instrument clusters (PIC16F1936-I/MV industrial variant), medical glucose meters and portable monitors, IoT edge sensors with local display feedback, and low-cost white-goods user interfaces. The -E suffix denotes the Extended temperature grade (-40°C to +125°C), while /MV indicates the 28-pin UQFN-EP package. When designing with this device, allocate one I/O pin per LCD segment above the integrated 4 commons x 24 segments baseline and verify charge-pump capacitor selection against the on-glass panel capacitance. Programming via ICSP requires RB6/ICCK and RB7/ICCDAT to remain accessible; avoid reassigning them to high-load outputs without a test-point footprint. This page synthesizes distributor pricing, drop-in alternatives drawn from the same PIC16F193x family, and practical design notes not found in the manufacturer datasheet. Pricing reflects current distributor data as of 2026-09-21.

طلب عرض سعر اتصل بنا
PIC16F1936-E/SO - 8-Bit 32MHz 14KB Flash MCU | Microchip
PIC16F1936-E/SO

PIC16F1936-E/SO - 8-Bit 32MHz 14KB Flash MCU | Microchip

The Microchip Technology PIC16F1936-E/SO is an 8-bit CMOS microcontroller belonging to the PIC16F193x/194x family, featuring 14KB of Flash program memory, 512 bytes of RAM, and 256 bytes of EEPROM, housed in a 28-pin SOIC package. It operates at up to 32 MHz clock speed from a 2.3V to 5.5V supply, integrating an LCD driver, a 10-bit ADC, and nanoWatt XLP extreme-low-power technology for battery-friendly designs. A microcontroller (MCU) is a single-chip computer containing a CPU core, non-volatile program memory, working RAM, and a rich set of peripheral interfaces. Within the broader semiconductor taxonomy, an 8-bit MCU sits below 16-bit and 32-bit MCUs in arithmetic width and code density, but excels in deterministic interrupt response, low cost, and very low quiescent draw for always-on edge nodes. The PIC16F1936 is part of Microchip's enhanced mid-range 8-bit core family, with the XLP nanoWatt lineage adding sleep currents down to the nanoampere range - well suited to battery-powered metering, sensor nodes, and human-machine interface panels that must last years on a single cell. Key features include 25 general-purpose I/O pins, a 10-bit ADC with up to 14 channels, an integrated LCD driver supporting up to 96 segments, two comparators, a 5-bit DAC, EUSART, SPI, and I2C communication peripherals. The on-chip mTouch capacitive-sensing module and the nanoWatt XLP power management modes (Idle, Doze, Sleep, and alternate-run) allow the device to drop below 50 nA in real-world deep-sleep scenarios. Architecturally, the PIC16F1936 uses Microchip's enhanced mid-range 8-bit RISC core with a hardware 8x8 multiplier, a single-cycle instruction execution at 32 MHz (125 ns instruction cycle), and a 16-level hardware stack. The integrated LCD driver includes a charge pump and contrast control, allowing direct connection to multiplexed glass displays without an external driver IC. A 32 kHz internal LF oscillator and a 32 MHz internal HF oscillator minimize external components in space-constrained designs. Typical applications include battery-powered IoT sensor nodes, consumer remote controls, thermostats, white-goods HMI panels, metering front-ends, and any cost-sensitive embedded design needing an integrated LCD segment driver. The wide 2.3V-5.5V operating range also suits USB-powered and 3.3V-rail products. When designing with this part, pay close attention to the ICD/ICSP pin assignments (RB6/ICLK, RB7/ICDAT) to keep them accessible for in-circuit debug, and reserve the correct configuration bits for oscillator source, watchdog, and code protection before code generation. The -E temperature grade extends to +125C, making the part suitable for under-hood and industrial cabinet environments. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer product page.

طلب عرض سعر اتصل بنا
PIC16F1936-E/SP - 8-bit 32MHz MCU 14KB Flash LCD XLP | Microchip
PIC16F1936-E/SP

PIC16F1936-E/SP - 8-bit 32MHz MCU 14KB Flash LCD XLP | Microchip

The Microchip Technology PIC16F1936-E/SP is an 8-bit CMOS flash microcontroller in the PIC16F193x family featuring nanoWatt XLP (eXtreme Low Power) technology and an integrated LCD driver. The device delivers 32 MHz (8 MIPS) CPU performance from a 14 KB (8K x 14 words) flash program memory, 512 bytes of SRAM, and 256 bytes of EEPROM data memory, all housed in a 28-pin SPDIP (Skinny Plastic DIP) through-hole package. The -E suffix denotes the Extended industrial temperature range of -40 C to +125 C, while the /SP suffix indicates SPDIP-28 packaging supplied in tube. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (ROM/flash), working memory (RAM), non-volatile data memory (EEPROM), and programmable peripherals. The PIC16F1936 belongs to the enhanced mid-range PIC16 family using a RISC Harvard architecture, in the hierarchy: PIC16F1936 -> PIC16 enhanced mid-range -> PIC16 family -> 8-bit PIC microcontrollers -> microcontrollers -> embedded processors -> semiconductors. Its integrated LCD driver, multiple communication peripherals, and 10-bit ADC make it a complete system-on-chip for human-interface and battery-powered designs. Key features include 25 general-purpose I/O pins, an integrated 10-bit ADC with up to 11 channels, two comparators with selectable references, an mTouch capacitive sensing module, an EUSART, MSSP (SPI/I2C), and a charge time measurement unit (CTMU). The nanoWatt XLP technology delivers typical sleep currents down to 20 nA with the Real-Time Clock operating, enabling multi-year battery life in metering, sensor, and remote-control applications. The architecture implements a single-cycle instruction pipeline operating at 200 ns per instruction, with hardware interrupt context save and a 31 kHz internal oscillator option. The integrated LCD driver supports up to 184 segments (pin-dependent) with variable contrast control and multiple drive modes, eliminating the need for an external LCD controller. Typical applications include low-power LCD-based consumer products, battery-operated sensor nodes, home-automation keypads, instrumentation displays, industrial HMI panels, and metering equipment. The /SP SPDIP-28 package is favored for prototype and through-hole industrial designs where socketed or hand-replaceable MCUs simplify rework. When designing with this part, evaluate the supply voltage range (1.8 V to 5.5 V) against your battery chemistry and use the nanoWatt sleep modes aggressively for battery applications. Always configure the unused I/O pins as outputs low to minimize quiescent current, and follow Microchip's emulated EEPROM guidance to extend flash endurance when using EEPROM emulation libraries. This page synthesizes distributor pricing, drop-in alternatives, comparison matrix, and practical design notes that complement the manufacturer datasheet and aid in component selection.

طلب عرض سعر اتصل بنا
PIC16F1936-E/SS - 8-bit MCU 14KB Flash LCD SSOP-28 | Microchip
PIC16F1936-E/SS

PIC16F1936-E/SS - 8-bit MCU 14KB Flash LCD SSOP-28 | Microchip

The Microchip Technology PIC16F1936-E/SS is an 8-bit CMOS flash-based microcontroller with 14KB of program memory, 512 bytes of RAM, and 256 bytes of EEPROM, housed in a 28-pin SSOP (Shrink Small Outline Package). It operates from 1.8V to 5.5V supply and integrates an on-chip LCD driver supporting up to 96 segments, making it suitable for user-interface designs with glass or chip-on-glass displays. An 8-bit microcontroller (MCU) is a compact computing device built around an 8-bit data bus, optimized for embedded control tasks such as sensor reading, actuator driving, and human-machine interface handling. Within the semiconductor hierarchy, MCUs sit under microcontrollers, which belong to the broader embedded processor family, alongside DSPs and microprocessors. The PIC16F1936 belongs to Microchip's enhanced mid-range PIC16 family, which adds more peripherals, more interrupt sources, and lower power consumption over earlier baseline PIC16 devices, all without sacrificing the iconic single-cycle instruction set. Key features include a 32 MHz internal oscillator (8 MIPS throughput), 25 digital I/O pins, a 10-bit ADC with up to 14 channels, multiple PWM and capture/compare modules, an mTouch capacitive-sensing peripheral, and nanoWatt XLP extreme-low-power technology with sleep currents under 50 nA typical. The integrated LCD controller supports static, 1/2, 1/3, and 1/4 multiplex modes, and supplies the charge-pump bias voltages needed for contrast. The device uses a modified Harvard RISC architecture with separate program and data buses, executed through a 14-bit instruction word. An on-chip In-Circuit Serial Programming (ICSP) interface and In-Circuit Debug (ICD) support allow field updates and real-time development without removing the part. The SSOP-28 footprint offers a compact outline while keeping 0.65 mm pitch manageable for hand-soldered prototypes. Typical applications include consumer appliances with LCD front panels, battery-powered sensor nodes, medical measurement devices with character displays, industrial control keypads with segment LCDs, and metering equipment such as electricity or water meters. The wide voltage range and low-power modes support both line-powered and battery-backed designs. When designing with this part, prioritize assigning analog and digital functions to pins that retain their capability at the chosen VDD - some peripherals disable below 2.0V. Use a 100 nF decoupling capacitor adjacent to VDD, and route the segment/commons to the LCD with short, equal-length traces. For noise-sensitive ADC readings, configure the part to enter Sleep between conversions. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design guidance not consolidated in the manufacturer datasheet, helping engineers shorten the bill-of-materials decision cycle for the PIC16F1936 family.

طلب عرض سعر اتصل بنا
PIC16F1936-I/ML - 8-Bit 32MHz 14KB Flash MCU LCD XLP | Microchip
PIC16F1936-I/ML

PIC16F1936-I/ML - 8-Bit 32MHz 14KB Flash MCU LCD XLP | Microchip

The Microchip Technology PIC16F1936-I/ML is a member of the PIC16 (L)F1934/6/7 family of 28/40/44-pin flash-based, 8-bit CMOS microcontrollers featuring an integrated LCD driver and nanoWatt XLP extreme low-power technology. The device integrates 14KB of Flash program memory (8K x 14 words), 512 bytes of SRAM, and 256 bytes of EEPROM, executing instructions at up to 32 MHz from an enhanced mid-range PIC core. It is offered in a 28-pin VQFN package with exposed pad (6 x 6 mm) and operates from 1.8 V to 5.5 V across an industrial -40C to +85C temperature range. What is an 8-bit microcontroller? An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit data path that integrates a CPU, non-volatile Flash program memory, volatile SRAM, EEPROM data memory, and a set of peripherals (timers, ADC, communication, I/O). The PIC16F1936 belongs to the broader hierarchy: microcontroller -> embedded controller -> semiconductor. nanoWatt XLP technology is Microchip's branded ultra-low-power architecture that lets the device run in sleep modes drawing microamp currents, ideal for battery-operated equipment. Key differentiating features include 25 general-purpose I/O pins, an integrated LCD driver (up to 96 segments), a 10-bit ADC with up to 17 channels, four 10-bit PWM modules, two comparators, an EUSART, plus master/slave I2C and SPI. The device ships with nanoWatt XLP sleep currents as low as 1.8 uA typical, enabling coin-cell-powered designs that wake periodically to service sensors. The PIC16F1936 uses a 14-bit instruction word RISC architecture with a hardware stack, hardware register file, and a configurable instruction set that delivers deterministic throughput and tight interrupt latency. Its peripheral pin select (PPS) allows most digital I/O to be remapped to alternate pins, simplifying PCB routing. Internal oscillator blocks (LF, MF, HF) reduce external component count, and the integrated LCD charge pump allows direct segment driving without an external bias network. Typical applications include battery-powered consumer appliances, low-cost LCD user interfaces in home appliances, sensor node data acquisition, and industrial controls with segmented displays. The wide 1.8 V to 5.5 V supply range supports direct connection to Li-ion, 2xAA, and 3.3 V regulated rails. Designers should budget for at least one decoupling capacitor near each supply pin and follow Microchip's 28-pin QFN PCB layout guidelines to dissipate heat via the exposed pad. The internal oscillator accuracy is approximately +/- 2% over voltage and temperature; an external crystal is recommended when the UART must meet tight baud-rate tolerances. This page combines verified distributor pricing, drop-in same-package alternatives, and practical design notes synthesized beyond the manufacturer datasheet for engineers sourcing a production-ready 8-bit MCU with LCD support.

طلب عرض سعر اتصل بنا
PIC16F1936-I/MV - 8-Bit XLP MCU 14KB Flash LCD 28-UQFN
PIC16F1936-I/MV

PIC16F1936-I/MV - 8-Bit XLP MCU 14KB Flash LCD 28-UQFN

The Microchip Technology PIC16F1936-I/MV is an 8-bit CMOS flash-based microcontroller from the PIC16 (L)F1934/6/7 family, featuring nanoWatt XLP (eXtreme Low Power) technology, 14KB (8K x 14) of program Flash memory, and an integrated LCD driver. The device operates from a 2.3V to 5.5V supply, runs at up to 32 MHz internal clock, and is housed in a 28-pin UQFN EP (4x4 mm) package with an exposed thermal pad. A PIC microcontroller (MCU) is a Harvard-architecture RISC processor widely used in embedded systems for control, sensing, and human-machine interface tasks. The PIC16F1936 belongs to the enhanced mid-range PIC16 family and adds an on-chip segmented LCD driver, making it a specialized member of the broader 8-bit MCU hierarchy that sits between simple PIC10/12/16 baseline parts and higher-end PIC18/dsPIC devices. Key features include 14KB Flash program memory, 512 bytes of RAM, 256 bytes of EEPROM, 25 digital I/O pins, an internal 32 MHz oscillator, a 10-bit ADC with up to 14 channels, multiple timers (Timer0/1/2/4/6), enhanced PWM, MSSP (SPI/I2C), EUSART, and the integrated LCD driver supporting up to 96 segments. nanoWatt XLP technology delivers deep-sleep currents in the nanoamp range, making the part attractive for battery-powered products that must wake periodically to read sensors. The architecture combines a single-cycle 8-bit ALU with a 14-bit instruction word, providing deterministic execution and tight code density. The integrated LCD controller can directly drive static, 1/2, 1/3, or 1/4 duty multiplexed glass, eliminating the need for an external LCD driver IC and reducing BOM cost in meter, appliance, and instrument designs. Typical applications include battery-powered consumer products with LCD displays (thermometers, kitchen scales, remote controls), IoT sensor nodes that must sip power between transmissions, industrial HMI panels, metering equipment, and low-cost white goods with segmented LCD user interfaces. When designing with this device, pay attention to the UQFN EP package's exposed pad - it must be soldered to the ground plane for both electrical grounding and thermal dissipation. Use Microchip's MPLAB X IDE with XC8 compiler for code development and consider the PICkit or ICD programmer for in-circuit debugging. This page synthesizes distributor pricing from DigiKey and Mouser, same-family Microchip drop-in alternatives, and practical design notes that complement the manufacturer datasheet.

طلب عرض سعر اتصل بنا
PIC16F1936-I/SO - 8-Bit 32MHz 14KB Flash MCU w/ LCD | Microchip
PIC16F1936-I/SO

PIC16F1936-I/SO - 8-Bit 32MHz 14KB Flash MCU w/ LCD | Microchip

The Microchip PIC16F1936-I/SO is an 8-bit PIC16 microcontroller built on the enhanced mid-range RISC core with nanoWatt XLP (eXtreme Low Power) technology, delivering up to 32 MHz CPU clock, 14 KB Flash program memory and 512 bytes RAM in a 28-pin SOIC package. The device integrates a segmented LCD controller with charge pump, a 10-bit ADC, and the standard PIC16F peripheral set (USART, SPI, I2C), making it a single-chip solution for battery-powered instruments and display-driven user interfaces. What is a PIC16F microcontroller? The PIC16F family is Microchip's enhanced mid-range 8-bit RISC microcontroller line, positioned between the baseline PIC10/12/16 and the high-performance PIC18/PIC24 families. PIC16F devices use a Harvard architecture with a single accumulator (W register) and a 14-bit instruction word, which delivers deterministic 200 ns instruction execution at 32 MHz, plus nanoWatt XLP sleep modes that drop current consumption below 50 nA in real-world designs. Within the broader taxonomy: PIC16F1936 is a member of the PIC16F193x sub-family that adds on-chip LCD driver support — a feature largely absent from other PIC16F sub-families such as PIC16F188xx. This makes it the closest functional match for legacy PIC16F917/PIC16F946 sockets. Key specifications include 25 I/O pins (out of 28 package pins), 11 analog-capable channels (10-bit ADC), 2 comparators, a 32 kHz internal oscillator plus 16 MHz HFINTOSC with PLL, and 256 bytes of EEPROM. The device operates from 2.3 V to 5.5 V across the industrial -40 °C to +85 °C range (the "I" suffix), with low-power modes including Sleep (~50 nA typical), Watchdog Timer (~1 μA) and a real-time clock current under 1 μA. The integrated segmented LCD driver supports up to 96 segments with software-controlled contrast and charge pump. Architecturally, the PIC16F1936 combines a programmable 32-level hardware stack, three timer modules (Timer0/1/2), two CCP modules, and an EUSART with auto-baud detect. Memory includes 14 KB self-programmable Flash (10,000 erase/write cycles endurance), 512 bytes SRAM, and 256 bytes EEPROM. The on-chip LCD driver supports static, 1/2, 1/3 and 1/4 multiplex with up to 64 segment outputs (32 commons × 8 segments in some pin combinations), enabling direct connection to glass displays without an external charge pump or bias resistors. Typical applications include battery-powered metering (electricity/water/gas), consumer appliances with segment LCD displays, medical devices (glucometers, thermometers), industrial control panels with text or numeric LCD readouts, and IoT sensor hubs that require a local LCD for status. The 32 MHz CPU plus nanoWatt XLP also suits low-duty-cycle edge nodes that spend most of their time in Sleep and wake periodically to sample and update the display. When designing with this part, select the device variant carefully: "I" denotes industrial temperature grade (-40 °C to +85 °C); "E" denotes extended (-40 °C to +125 °C); and the trailing "SO" suffix indicates the 28-pin SOIC package. Engineers seeking the same die in other packages can use PIC16F1936-I/SS (28-pin SSOP), PIC16F1936-I/SP (28-pin SPDIP), PIC16F1936-I/ML (28-pin QFN) or PIC16F1936-I/MV (28-pin UQFN), all of which share the same pinout. This page synthesizes distributor pricing, drop-in package variants, application-circuit companions, and design notes not bundled in the manufacturer datasheet.

طلب عرض سعر اتصل بنا
PIC16F1936-I/SP - 8-bit XLP MCU 14KB Flash LCD 28-SPDIP | Microchip
PIC16F1936-I/SP

PIC16F1936-I/SP - 8-bit XLP MCU 14KB Flash LCD 28-SPDIP | Microchip

The Microchip PIC16F1936-I/SP is an 8-bit enhanced mid-range CMOS flash microcontroller in the PIC® XLP™ 16F family, delivering 32 MHz CPU performance with 200 ns instruction execution, 14 KB Flash program memory, 512 bytes RAM, and 256 bytes EEPROM, housed in a 28-pin SPDIP package. The device integrates an LCD driver supporting up to 96 segments, a 10-bit ADC, multiple capture/compare/PWM modules, and the nanoWatt XLP extreme-low-power technology that drops quiescent current below 50 nA in sleep mode. According to the Microchip product page, the PIC16F1936 family is intended for battery-friendly human-machine interface designs where LCD display, analog sensing, and long battery life co-exist on a single chip. A PIC microcontroller (Programmable Interface Controller) is a Harvard-architecture RISC microprocessor with separate program and data buses, flash memory, and on-chip peripherals, widely used in embedded control applications. The PIC16F1936 belongs to the enhanced mid-range PIC16 family, one tier below PIC18 and PIC24, and one tier above the baseline PIC10/12/16. This category sits within the broader microcontroller hierarchy (microcontroller -> 8-bit MCU -> PIC16 -> enhanced mid-range -> XLP nanoWatt), making it a strong fit for cost-sensitive, low-power, LCD-equipped appliances. Key differentiating features include the integrated LCD driver with charge pump and contrast control, core-independent peripherals such as the Configurable Logic Cell (CLC), Complementary Waveform Generator (CWG), and Numerically Controlled Oscillator (NCO), plus the eXtreme Low Power (XLP) sleep mode drawing under 50 nA. The 28-pin SPDIP footprint exposes 25 GPIO lines, of which many are multiplexed with ADC, comparator, SPI, I2C, and UART peripherals, giving designers flexible pin mapping for sensor and user-interface boards. Architecturally, the device uses a 14-bit instruction word with a hardware stack of 16 levels and 35 instructions, combined with a wide peripheral set including 5 CCP/ECCP modules, an enhanced USART, MSSP for SPI/I2C, and a 16-level deep hardware stack. The 10-bit ADC delivers up to 17 channels with acquisition time configurable in software. The integrated LCD controller supports static, 1/2, 1/3, and 1/4 multiplexed glass with internal charge pump, eliminating the need for an external LCD bias supply in most designs. Typical applications include battery-powered consumer appliances with LCD readouts (coffee machines, kitchen scales, thermostats), industrial sensor transmitters with display feedback, and low-power IoT edge nodes that wake periodically to read sensors and update a segment display. Designers also use this part in medical handheld meters and HVAC control panels where a single chip must drive a glass LCD, scan buttons, and run low-power wireless protocols. A key design consideration is brown-out voltage selection: the PIC16F1936-I/SP supports BOR and LPBOR down to 1.8 V, which is critical for 2-cell alkaline or single-cell Li coin battery stacks. Always reserve the ICSP/ICD pins (RB6/RB7) for in-circuit programming and debugging, even in production layouts. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found on any single manufacturer or distributor page.

طلب عرض سعر اتصل بنا
PIC16F1936T-I/ML - 14KB Flash 8-Bit MCU 28-QFN | Microchip
PIC16F1936T-I/ML

PIC16F1936T-I/ML - 14KB Flash 8-Bit MCU 28-QFN | Microchip

The Microchip PIC16F1936T-I/ML is an 8-bit PIC microcontroller from the PIC® XLP™ 16F family with 14KB (8K x 14) of Flash program memory, 32 MHz CPU clock, and integrated LCD driver, packaged in a 28-pin QFN (6x6 mm). It operates from 1.8V to 5.5V and is qualified to the industrial -40C to +85C temperature range. The 'T' suffix indicates Tape & Reel packaging, 'I' denotes industrial temperature grade, and '/ML' denotes the QFN-28 (6x6) lead-free package. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (Flash), data RAM, EEPROM, peripherals (timers, ADC, communication, I/O), and interrupt logic onto one die. The PIC16F core uses a modified Harvard RISC architecture with a 14-bit instruction word and a two-stage pipeline, optimized for deterministic response and low interrupt latency. The PIC16F1936 sits within the XLP (eXtreme Low Power) family, where nanoWatt technology enables sleep currents below 50 nA, supporting battery-powered applications that demand years of standby life. Key features include 512B RAM, 256B EEPROM, an on-chip LCD driver capable of driving up to 64 segments, a 5-channel 10-bit ADC, multiple timers (Timer0/1/2/6), EUSART, I2C, SPI, and up to 25 digital I/O pins. Internal 16 MHz and 32 kHz oscillators reduce external component count. The integrated LCD charge pump and on-chip voltage reference minimize external BOM for glass and chip-on-board displays. The PIC16F1936 architecture uses CMOS flash technology with 100,000 erase/write endurance on the program memory and 1,000,000-cycle EEPROM endurance. Enhanced peripherals include mTouch capacitive sensing, an SR-latch, PWM modules, and a configurable logic cell. Together they provide flexibility for mixed-signal front-ends in a single MCU. Typical applications include battery-powered consumer devices with segment LCDs (thermostats, blood pressure monitors, water/gas meters), home appliances with user interfaces, industrial control panels, and remote sensor nodes. The XLP sleep current is critical for metering and IoT edge nodes powered by coin-cell or 2x AA cells. Design consideration: route the QFN-28 (6x6 mm) thermal/exposed pad (EP) to a continuous ground copper pour to dissipate up to ~800 mW and to meet the -40C to +85C industrial range under sealed-enclosure conditions. Enable the internal oscillator to save two external crystals and reduce BOM. This page synthesizes distributor pricing, drop-in alternatives from the PIC16F/LF193x family, comparison against close MCUs, and practical design notes not consolidated in any single manufacturer document.

طلب عرض سعر اتصل بنا
PIC16F1936T-I/MV - 8-bit 32MHz XLP MCU 14KB Flash 28-UQFN
PIC16F1936T-I/MV

PIC16F1936T-I/MV - 8-bit 32MHz XLP MCU 14KB Flash 28-UQFN

The Microchip PIC16F1936T-I/MV is an 8-bit PIC® XLP™ flash microcontroller running at up to 32 MHz with 14 KB (8K × 14 words) of program Flash memory and a 28-pin UQFN (4 × 4 mm) exposed-pad package. It integrates 256 bytes of EEPROM, 512 bytes of RAM, a 10-bit ADC with up to 17 channels, and the nanoWatt XLP™ ultra-low-power technology that delivers typical sleep currents below 50 nA. An 8-bit microcontroller (MCU) is a compact, single-chip processor with an 8-bit data bus, typically integrating CPU, Flash program memory, SRAM data memory, EEPROM, timers, ADC, comparators, and serial peripherals into one package. Within the broader taxonomy, an MCU belongs to microcontrollers → integrated circuits (ICs) → semiconductors. The "PIC16" prefix designates Microchip's mid-range enhanced 8-bit core family, widely used in cost-sensitive and battery-powered embedded designs. Key features include an integrated LCD driver supporting up to 96 segments, three timers (Timer0/Timer1/Timer2), two comparators, a 5-bit DAC, EUSART, MSSP (I²C/SPI), 25 digital I/O pins, and 11 capacitive-touch channels via the mTouch™ peripheral. The nanoWatt XLP™ technology enables extended battery life across the 2.3 V to 5.5 V operating range. The UQFN-28 (MV) package has an exposed thermal pad, lowering θJA versus standard QFN and improving continuous high-current operation. Architecturally, the device uses the PIC16 enhanced mid-range core with a single-cycle instruction execution model (except branches) and a 16-level hardware stack. This RISC-style architecture simplifies deterministic timing analysis and code generation, while on-chip peripherals are mapped to linear memory to keep C-compiler output efficient. Typical applications include battery-powered IoT sensor nodes, low-power LCD-display consumer products, capacitive-touch user interfaces, household appliances, and industrial control panels. The wide 2.3 V to 5.5 V supply range makes it drop-in compatible with 2 × AA, 2 × AAA, single-cell Li-ion, and 5 V regulated rails. Designers should reserve the exposed pad for thermal relief and provide 0.1 µF decoupling on VDD/VSS pairs within 2 mm of the pins. For low-power battery designs, follow Microchip application note AN1267 on nanoWatt XLP™ sleep-current optimization. The PIC16F1936T-I/MV uses the T suffix to indicate tape-and-reel packaging. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا
PIC16F1937-E/ML - 8-Bit XLP MCU, 32MHz, 14KB Flash, 44-QFN | Microchip
PIC16F1937-E/ML

PIC16F1937-E/ML - 8-Bit XLP MCU, 32MHz, 14KB Flash, 44-QFN | Microchip

The Microchip PIC16F1937-E/ML is an 8-bit PIC microcontroller built on the enhanced mid-range PIC16 core with nanoWatt XLP (eXtreme Low Power) technology, delivering up to 32 MHz performance in a 44-pin QFN (8x8 mm) package. It integrates 14 KB Flash program memory (8K x 14 words), 512 bytes of SRAM, 256 bytes of EEPROM, an integrated LCD driver, and up to 36 I/O pins in a single low-power device. A microcontroller (MCU) is a single-chip computer containing a CPU, memory (Flash/EEPROM/RAM), and programmable peripherals, and it is the most widely deployed IC category in embedded systems. The 8-bit segment targets cost-sensitive, deterministic control tasks such as user interfaces, sensor readouts, and battery-powered appliances where ultra-low standby current matters more than throughput. The PIC16F1937 belongs to Microchip's PIC16 XLP family, which extends battery life into the multi-year range via sleep currents below 1 uA and active run currents measured in tens of microamperes per MHz. Key features include 32 MHz operation from a 1.8 V to 5.5 V supply, an integrated 10-bit ADC with up to 14 channels, multiple capture/compare/PWM modules, an enhanced USART, two MSSP (SPI/I2C) modules, and on-chip LCD driver support for up to 96 segments. The device also offers internal 16 MHz and 31 kHz oscillators, a configurable 16-level watchdog timer, and an enhanced 8-bit timer block. ICSP (In-Circuit Serial Programming) and ICD (In-Circuit Debug) support shrink development cycle time. Architecturally the PIC16F1937 uses a Harvard RISC design with a 14-bit wide instruction word and a hardware multiply, giving deterministic single-cycle execution for most instructions and predictable interrupt latency. nanoWatt XLP adds core-independent peripherals, a low-power Timer1 gate, and ultra-low-power wake sources, which let the CPU stay asleep while capacitive touch sensing or LCD refresh continues in hardware. The 14 KB Flash holds roughly 8K single-word instructions, suitable for protocol stacks plus application logic in mixed-signal front-end designs. Typical applications include consumer appliances with LCD front panels (washing machines, microwave ovens, thermostats), battery-powered sensor nodes with segmented displays, metering (energy, water, gas) with LCD readout, and industrial human-machine interface (HMI) terminals. It also fits USB-key peripherals, remote controls, and any cost-constrained design that benefits from on-chip LCD drive and nanoWatt XLP sleep currents below 1 uA. When designing with this MCU, reserve two PCB layers for clean VDD/AVDD decoupling with a 100 nF ceramic cap within 5 mm of each supply pin. If the internal ADC is used, tie VREF+ to a separate filtered rail to keep digital switching noise out of measurement. Use the LCDF<x> pins carefully - segment bias resistors and charge-pump capacitors must follow the LCD driver app note for stable contrast across temperature. This page synthesizes drop-in same-package PIC16 alternatives, distributor pricing snapshots, application circuits, and design guidance that go beyond a single device datasheet page, giving engineers a single decision point for the 44-QFN pin-out.

طلب عرض سعر اتصل بنا