المتحكمات الدقيقة

المنتجات (20,000+)

PIC18F45K40-E/ML - 8-Bit 64MHz 32KB Flash MCU QFN-44 | Microchip
PIC18F45K40-E/ML

PIC18F45K40-E/ML - 8-Bit 64MHz 32KB Flash MCU QFN-44 | Microchip

The Microchip Technology PIC18F45K40-E/ML is an 8-bit RISC microcontroller featuring the PIC18 CPU core, 32 KB of Flash program memory, 2 KB of RAM, and 256 bytes of data EEPROM, housed in a 44-pin QFN (ML) package with exposed pad. It operates from 2.3 V to 5.5 V, supports a maximum clock frequency of 64 MHz, and integrates rich analog and digital peripherals including a 10-bit ADC with Computation (ADC2), a 5-bit DAC, comparators, PWM, CCP, CWG, HLT, WWDT, and SCAN/CRC. An 8-bit microcontroller (MCU) is a single-chip computer that combines an 8-bit CPU, program memory (Flash/ROM), data memory (RAM), and peripheral interfaces on one die. PIC18F-series MCUs sit within the broader hierarchy: 8-bit microcontroller -> microcontroller -> embedded controller -> semiconductor. They are characterized by Harvard architecture, deterministic instruction execution, and mature toolchains (MPLAB X IDE, XC8 compiler), making them ideal for cost-sensitive and low-power applications. Key features of the PIC18F45K40-E/ML include Core Independent Peripherals (CIPs) such as the Complementary Waveform Generator (CWG), Windowed Watchdog Timer (WWDT), and Configurable Logic Cell (CLC), which offload tasks from the CPU. The eXtreme Low Power (XLP) technology enables deep sleep currents as low as [DATA_NEEDED] nA, and 5 V tolerance on digital I/O allows direct interface to legacy industrial buses without level shifters. The device uses a modified Harvard architecture with a 16-bit instruction word and an 8-bit data path, delivering up to 16 MIPS at 64 MHz. The 32 KB self-programmable Flash supports in-application programming (IAP) and the 256-byte EEPROM provides byte-level non-volatile storage for user settings such as calibration constants. Typical applications include industrial control (sensor interfacing, motor control with CWG), consumer electronics (HMI with segmented LCD driving), IoT edge nodes, automotive body controllers (with PIC18F45K40-E/ML ext-grade variants), and battery-powered metering. The wide 2.3-5.5 V range supports both 3.3 V and 5 V designs. When designing with this part, pay attention to decoupling: place 100 nF ceramic capacitors adjacent to every VDD/VSS pair, and add a 10 µF bulk capacitor near the IC. The exposed thermal pad on the QFN-44 package must be soldered to a ground copper pour to meet thermal and electrical specifications. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing engineers with consolidated selection guidance.

طلب عرض سعر اتصل بنا
PIC18F45K40-E/MV - 32KB Flash 8-bit MCU, 40-UQFN | Microchip
PIC18F45K40-E/MV

PIC18F45K40-E/MV - 32KB Flash 8-bit MCU, 40-UQFN | Microchip

The Microchip Technology PIC18F45K40-E/MV is an 8-bit PIC18 XLP microcontroller delivering 64 MHz CPU performance, 32 KB Flash program memory, 2 KB RAM, and 256 B EEPROM in a 40-pin UQFN (5x5 mm) package. The device integrates a 10-bit ADC2, 5-bit DAC, comparators, CCP, PWM, CWG, WWDT, and SCAN/CRC peripherals on a single die, suited to general-purpose 5V and low-power embedded designs. What is a PIC18F Microcontroller? A PIC18F is an 8-bit Harvard-architecture CMOS microcontroller from Microchip's enhanced mid-range family, featuring a RISC core with 16-bit instructions and 8-bit data path. PIC18F devices occupy the LDO -> linear regulator product hierarchy analogue within the MCU taxonomy: 8-bit MCU -> microcontroller -> embedded controller -> semiconductor. They are designed for deterministic real-time control, low power consumption, and ease of programming via MPLAB X IDE. Key features include eXtreme Low Power (XLP) technology with deep-sleep currents typically below 1 µA, 36 digital I/O pins with Peripheral Pin Select (PPS), four 16-bit timers, two I2C/SPI ports, two UART/USART modules with LIN support, a 10-bit ADC with up to 35 channels, and Core Independent Peripherals (CIPs) such as Complementary Waveform Generator (CWG), Windowed Watchdog Timer (WWDT), and CRC/Memory Scan. The device uses an enhanced Harvard architecture with a 16-bit instruction word, 8-bit data bus, hardware multiply, and 31-level stack. Internal oscillator accuracy is factory calibrated to ±1% across 0-70 °C and ±2% over -40 to +125 °C, eliminating external crystals in many cost-sensitive designs. The integrated 5-bit DAC and rail-to-rail input comparators enable signal-conditioning tasks without external components. Typical applications include industrial sensor nodes, home appliances, automotive body controllers, LED lighting drivers, low-power IoT edge devices, battery chargers, and consumer handheld products. The 5V tolerant I/O simplifies interfacing to legacy 5V peripherals and modules without level shifters. When designing with this part, allocate the PPS mapping early - each peripheral function can be routed to multiple I/O pins. Ensure decoupling capacitors are placed within 3 mm of VDD pins and the exposed thermal pad (on UQFN packages) is soldered to the ground plane for thermal dissipation and electrical performance. This page synthesizes distributor pricing, drop-in alternatives from the same PIC18F K40 family, and practical design notes that complement the manufacturer datasheet with selection guidance, comparison data, and verified cross-references not aggregated on a single OEM or distributor page.

طلب عرض سعر اتصل بنا
PIC18F45K40-I/PT - 8-Bit 64MHz 32KB Flash XLP MCU 44-TQFP | Microchip
PIC18F45K40-I/PT

PIC18F45K40-I/PT - 8-Bit 64MHz 32KB Flash XLP MCU 44-TQFP | Microchip

The Microchip Technology PIC18F45K40-I/PT is an 8-bit PIC18 XLP microcontroller running at 64 MHz with 16 MIPS throughput, integrating 32 KB of self-programmable Flash, 2 KB of SRAM, and 256 bytes of EEPROM, housed in a 44-pin TQFP (PT) 10x10 mm package. It is part of the PIC18(L)F26/45/46K40 family and delivers 36 digital I/O pins, a 35-channel 10-bit ADC with computation, a 5-bit DAC, and Core Independent Peripherals (CIPs) including CWG (Complementary Waveform Generator), WWDT, CRC/SCAN, and SMT (Signal Measurement Timer). An 8-bit microcontroller (MCU) is a programmable processor integrating CPU, non-volatile memory (Flash), volatile memory (RAM), and peripherals onto a single silicon die. The PIC18 family is built on a modified Harvard RISC architecture and falls within the broader taxonomy of microcontrollers, which themselves sit under microprocessors and integrated circuits. The K40 sub-family emphasizes XLP (eXtreme Low Power) nanoWatt technology, useful for battery-powered sensor nodes where quiescent current directly governs operational lifetime. Key features include 64 MHz operation supporting 16 MIPS, up to 36 digital I/O lines with 5V tolerance, a 35-channel 10-bit ADC capable of up to 100 ksps, multiple PWM/CCP/CWG peripherals for motor and power-conversion tasks, two I2C, two SPI, and one UART with LIN support. The wide 2.7V-5.5V supply range covers both single-cell Li-ion and regulated 5V buses, while nanoWatt sleep modes drop quiescent current to as low as 50 nA typical (per manufacturer documentation). Technically, the device uses an 8-bit RISC core with a hardware multiplier and a configurable 31-level stack, supported by MPLAB X IDE and the XC8 C compiler. The CIP block (CLC, CWG, DSM, SMT, CRC/SCAN, WWDT) lets hardware peripherals operate without CPU intervention, offloading tasks such as PWM generation, signal modulation, and watchdog timing, which frees the core for application logic. Typical applications include consumer appliance control boards, low-power IoT sensor nodes running on coin-cell or Li-ion batteries, industrial sensor signal conditioning, USB-less human-interface devices such as remote controls and keyboards, automotive body-electronics subsystems (non-safety), and small brushed DC motor control boards using CWG. The 2.7V-5.5V range and 5V-tolerant I/O simplify designs powered directly from regulated 5V rails. When designing with the PIC18F45K40-I/PT, place a 0.1 uF decoupling capacitor at each VDD pin and a bulk 1 uF-10 uF capacitor near the IC; use MPLAB X IDE with the XC8 compiler; and program in-circuit via ICSP on PGED1/PGEC1 to allow firmware updates without removing the MCU from the board. This page consolidates distributor pricing, verified drop-in TQFP alternatives from the same Microchip K40 family, and engineering-grade design notes that go beyond what manufacturer pages or basic distributor listings provide, giving procurement and engineering teams a single information-rich reference for the PIC18F45K40-I/PT.

طلب عرض سعر اتصل بنا
PIC18F45K40T-E/MVVAO - 32KB Flash 8-bit MCU, 40-UQFN, AEC-Q100 | Microchip
PIC18F45K40T-E/MVVAO

PIC18F45K40T-E/MVVAO - 32KB Flash 8-bit MCU, 40-UQFN, AEC-Q100 | Microchip

The Microchip PIC18F45K40T-E/MVVAO is a 32 KB Flash, 8-bit PIC microcontroller in the PIC18 K40 family, housed in a 40-pin UQFN (5x5 mm) exposed-pad package and qualified to AEC-Q100 for automotive applications. It combines 32 KB of Flash program memory, 2 KB of RAM, and 256 bytes of EEPROM with a 64 MHz internal oscillator and rich Core Independent Peripherals (CIPs) such as CWG, WWDT, CRC/SCAN, and a 16-bit PWM. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash/ROM), working memory (RAM), data memory (EEPROM), and a set of on-chip peripherals (timers, ADC, communication ports, etc.) on a single die. Within the broader semiconductor hierarchy, an MCU is a sub-category of microcomputer -> embedded processor -> SoC -> IC. The PIC18 family is Microchip's 8-bit Harvard-architecture line optimized for low-power, deterministic, interrupt-driven embedded control; the K40 sub-family adds an integrated 5V regulator that allows direct operation from a 5V rail without an external LDO. Key features of this part include 36 digital I/O pins, a 10-bit ADC with computation, a 5-bit DAC, two analog comparators, a 16-bit PWM, CCP, and the eXtreme Low Power (XLP) modes that drop quiescent current to the nanoampere range for sleep-mode applications. The wide 2.3V to 5.5V operating range and automotive temperature grade (-40C to +125C) make the device suitable for harsh-environment deployments. Architecturally the K40 uses a modified Harvard 8-bit core with hardware multiplier, 32 KB self-programmable Flash, and a Peripheral Pin Select (PPS) engine that allows digital peripheral functions (UART, SPI, PWM outputs) to be remapped to a wide choice of physical I/O pins, simplifying PCB routing. The integration of CIPs lets designers implement sensor acquisition, motor control, and communication tasks with minimal CPU intervention, lowering firmware complexity and BOM cost. Typical applications include automotive body electronics and sensor interfaces, industrial control nodes, low-power IoT edge devices, USB/HID human-interface peripherals, and small motor/LED lighting controllers. The 40-UQFN package with exposed thermal pad also enables compact layouts in space-constrained PCBs. According to the Microchip PIC18F45K40 datasheet, designers can use the MPLAB X IDE and XC8 compiler for code development, with the PICkit or MPLAB Snap debugger for programming. When designing with this device, ensure the exposed pad is soldered to a sufficiently large copper pour for thermal dissipation and ground reference; otherwise the device may overheat at high system clock speeds. Also note the trailing /MVVAO suffix denotes tape-and-reel automotive-grade delivery, so the I-grade temperature range applies. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا
PIC18F45K40T-I/PT - 32KB Flash 8-bit MCU, 44-TQFP | Microchip
PIC18F45K40T-I/PT

PIC18F45K40T-I/PT - 32KB Flash 8-bit MCU, 44-TQFP | Microchip

The Microchip Technology PIC18F45K40T-I/PT is an 8-bit PIC18 XLP family microcontroller integrating 32KB Flash program memory, 2KB SRAM, and 256B EEPROM, operating at up to 64MHz in a 44-pin TQFP (10x10mm) package. The tape-and-reel ("T") variant targets high-volume SMT production lines. The device supports a wide 2.5V to 5.5V VDD range and integrates eXtreme Low Power (XLP) technology. An 8-bit PIC microcontroller (MCU) is a single-chip computer based on Microchip's PIC (Peripheral Interface Controller) RISC architecture, integrating a CPU core, Flash program memory, SRAM, EEPROM data memory, and a rich set of peripherals (ADC, timers, PWM, communication interfaces such as UART/SPI/I2C). Within the broader taxonomy, the PIC18F family sits at the high-end of Microchip's 8-bit line, providing a 16-bit instruction word, linear memory model, and C-optimized architecture suitable for moderately complex embedded real-time control tasks. Key features include 36 digital I/O pins, 35 instructions with a 200ns minimum instruction cycle at 64MHz, an integrated 10-bit ADC with up to 35 channels, a 5-bit DAC, up to four CCP/ECCP modules, a Complementary Waveform Generator (CWG), Hardware Limit Timer (HLT), Windowed Watchdog Timer (WWDT), and SCAN/CRC for functional safety. Core Independent Peripherals (CIPs) such as the CWG, NCO, and DSM execute waveform synthesis and signal processing without CPU intervention, freeing the core for application logic. The PIC18F45K40 employs Microchip's enhanced mid-range core with a hardware 8x8 multiplier and a 32-level deep stack, enabling efficient C code generation. The wide 2.5V-5.5V VDD range supports both 3.3V and legacy 5V designs, while XLP technology delivers nanoamp-level sleep currents suited to energy-harvesting and battery-backed applications. Peripheral Pin Select (PPS) provides flexible remapping of digital peripherals to physical pins, simplifying PCB layout and reducing firmware pin-out constraints. Typical applications include industrial control and HMI panels, home appliance controls, IoT edge sensor nodes, automotive body electronics, low-power remote sensors, and consumer electronics with touch or proximity sensing. The combination of 5V tolerance and rich analog peripherals makes it well-suited to sensor conditioning, motor control loops, and lighting-control subsystems. When designing with this part, ensure the MCLR reset circuit follows Microchip's recommended RC time constant, and place decoupling capacitors (100nF plus 10uF bulk) within 5mm of VDD/AVDD pins. The PPS feature must be configured in firmware before peripheral use, so software teams should budget initialization time accordingly and lock peripheral mappings once the final pinout is committed. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer or distributor page, enabling engineers to evaluate PIC18F45K40T-I/PT fit for their design in one place.

طلب عرض سعر اتصل بنا
PIC18F45K42-E/P - 8-Bit 64MHz 32KB Flash MCU | Microchip
PIC18F45K42-E/P

PIC18F45K42-E/P - 8-Bit 64MHz 32KB Flash MCU | Microchip

The Microchip Technology PIC18F45K42-E/P is an 8-bit PIC microcontroller from the PIC18F K42 family, delivering 64MHz core performance with 32KB (16K x 16) of Flash program memory in a 40-pin PDIP through-hole package. It integrates a rich set of Core Independent Peripherals (CIPs), high-resolution analog peripherals, on-chip Direct Memory Access (DMA), and vectored interrupts for fast deterministic processing. The "-E" suffix indicates the Extended (industrial) operating temperature range, and "/P" denotes the PDIP-40 package. An 8-bit microcontroller (MCU) is a programmable integrated circuit that combines a CPU, memory, and I/O peripherals on a single die, optimized for cost-sensitive embedded control. PIC18F devices sit in the PIC mid-range hierarchy: PIC10/12/16/18 -> PIC18 (8-bit) -> PIC18F K-series (enhanced mid-range with CIPs) -> PIC18F K42 sub-family (newest generation with DMA and 12-bit ADC). They are typically used where deterministic real-time behavior, low power, and rich on-chip peripherals outweigh the throughput of 32-bit ARM cores. Key features include 32KB Flash, 2KB RAM, 256B EEPROM, a 12-bit differential ADC with computation, multiple UART/SPI/I2C, 5 CCP/PWM modules, and the peripheral DMA controller that moves data between memory and peripherals without CPU intervention. Operating voltage spans 2.3V to 5.5V, with XLP (eXtreme Low Power) modes drawing under 100nA in sleep. The DMA engine significantly reduces CPU overhead for ADC-to-memory, memory-to-UART, and PWM-update transfers. Typical applications include industrial sensor signal conditioning with DMA-driven ADC pipelines, low-power IoT battery nodes, USB-free human-interface panels, motor control (PWM + ADC), and general-purpose logic replacement where 32KB Flash and 64MHz clock provide ample headroom. The Extended temperature grade (-40C to +125C) suits automotive under-hood and factory-automation environments. Design tip: route the DMA channel priorities explicitly in MPLAB X IDE to avoid ADC-to-UART transfers starving other real-time tasks; use the on-chip 32kHz low-power oscillator for sleep-mode RTC counting rather than the 64MHz primary clock. This page synthesizes verified distributor pricing, drop-in same-package alternatives, and practical design notes not aggregated on the manufacturer product page or any single distributor listing.

طلب عرض سعر اتصل بنا
PIC18F45K42-E/PT - 32KB Flash 8-bit MCU | Microchip | TQFP-44
PIC18F45K42-E/PT

PIC18F45K42-E/PT - 32KB Flash 8-bit MCU | Microchip | TQFP-44

The Microchip Technology PIC18F45K42-E/PT is an 8-bit PIC RISC microcontroller with 32KB Flash program memory, 2KB RAM, 256 bytes EEPROM, and 36 I/O pins housed in a 44-pin TQFP (PT) package. It operates from 2.3V to 5.5V, supports 64MHz internal CPU clock from the 64MHz HFINTOSC, and integrates high-resolution analog with 12-bit ADC, 5-bit DAC, and four op-amps in the K42 family. A microcontroller (MCU) is a single-chip computer containing a CPU, memory (Flash/RAM/EEPROM), and peripherals that together implement embedded control functions. Within the broader semiconductor taxonomy, the PIC18F45K42 belongs to the 8-bit microcontroller category -> PIC18 family -> enhanced Harvard architecture -> Microchip PIC microcontrollers. The K42 sub-family in particular is positioned as a mid-range 'Core Independent Peripheral' (CIP) MCU that offloads tasks from the CPU through DMA, timers, CWG, NCO, and configurable logic cells. Key differentiating features include on-chip Direct Memory Access (DMA) controller for data transfers between memory and peripherals without CPU intervention, vectored interrupts for fast ISR servicing, four 8-bit slope-compensated PWMs with CCP, four UART, two SPI, two I2C peripherals, and a 32-bit CRC with scan. The device also integrates a temperature indicator, windowed watchdog timer, and eXtreme Low Power (XLP) sleep modes drawing under 50 nA typical. Architecturally the device uses a 16-bit instruction word modified Harvard pipeline executing most instructions in one cycle, with hardware multiply and a 31-level hardware stack. Internal HFINTOSC eliminates the external crystal in many designs while a PLL synthesizes 64MHz from the internal oscillator. Typical applications include industrial sensor nodes, low-power IoT edge devices, LED lighting controllers, motor control with FOC, USB-less human-interface boards, and automotive body modules where AEC-Q100 grades are not required. The 256-byte EEPROM is well suited for storing calibration constants and serial numbers in field-deployed devices. When designing with this MCU, observe the 2.3V minimum Vdd for the 'F' (Flash) variant; the 'LF' low-voltage variant supports down to 1.8V. Provide a 100 nF decoupling cap within a few mm of each Vdd pin and a bulk 4.7-10 uF on the main rail. The E/PT suffix indicates the -40C to +125C extended-temperature grade in TQFP tray packaging. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found on the Microchip datasheet alone.

طلب عرض سعر اتصل بنا
PIC18F45K42-I/ML - 8-bit 64MHz MCU 32KB Flash 44-QFN | Microchip
PIC18F45K42-I/ML

PIC18F45K42-I/ML - 8-bit 64MHz MCU 32KB Flash 44-QFN | Microchip

The Microchip Technology PIC18F45K42-I/ML is an 8-bit PIC18 microcontroller running at 64MHz with 32KB (16K x 16) of Flash program memory, housed in a 44-pin QFN (8x8 mm) package with industrial (-40C to +85C) temperature range. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, peripherals, and I/O on one die; the PIC18 family uses an enhanced Harvard RISC architecture with a 16-bit instruction word, providing higher code density than 8-bit CISC alternatives while keeping the deterministic real-time response that PIC MCUs are valued for. The K42 sub-family specifically adds Core Independent Peripherals (CIPs) that offload tasks like signal generation, waveform measurement, and communications framing from the core, freeing CPU cycles for application logic. Key features include 2KB SRAM, 256 bytes EEPROM, a 12-bit ADC with Computation (ADC2), 5-bit DAC, multiple comparators, PWM, DMA, vector interrupts, and a Device Information Area (DIA) for unique device identification. The PIC18 'K42' silicon also integrates a configurable logic cell (CLC), math accelerator (MAC), and 32-bit CRC/scanner modules that are uncommon in 8-bit MCUs. Architecturally, the K42 family is built on Microchip's enhanced mid-range core with a 14-stage pipeline, providing 64MHz operation from an internal 64MHz oscillator with PLL and Fractional mode options. The wide operating voltage range of 2.3V to 5.5V enables direct connection to lithium-ion cells or 5V rails, and XLP (eXtreme Low Power) technology delivers sleep currents in the nanoampere range for battery-backed applications. Typical applications include IoT sensor nodes, low-power wireless protocol bridging, USB device interfaces (via MSSP/SPI bridging), HVAC control modules, white goods motor control, and industrial sensor signal conditioning. The 12-bit ADC2 with oversampling and averaging is well suited for accurate temperature, pressure, and strain-gauge measurements in industrial instrumentation. When designing with this part, ensure correct programming tool selection (PICkit 4, ICD 4, or MPLAB SNAP) and use the latest MPLAB XC8 compiler for C code development. The QFN package requires careful PCB layout: a central thermal/exposed pad must be soldered to the ground plane with thermal vias for mechanical reliability and heat dissipation. Verify the DIA/DBG/ICSP pinout before finalizing the schematic. This page synthesizes distributor pricing from DigiKey, Mouser, and LCSC, cross-brand drop-in compatibility notes, and practical design guidance not found in the bare manufacturer datasheet. Engineers should treat the package_svg_key and pinout diagram below as the reference for PCB land pattern verification.

طلب عرض سعر اتصل بنا
PIC18F45K42-I/MV - 8-bit MCU, 64MHz, 32KB Flash, 40-UQFN | Microchip
PIC18F45K42-I/MV

PIC18F45K42-I/MV - 8-bit MCU, 64MHz, 32KB Flash, 40-UQFN | Microchip

The Microchip Technology PIC18F45K42-I/MV is an 8-bit PIC18 RISC microcontroller running at up to 64 MHz with 32 KB Flash, 2 KB SRAM and 256 B EEPROM, housed in a 40-pin UQFN (5x5 mm) exposed-pad package. It integrates a 12-bit ADC with Computation (ADC2), a 5-bit DAC, two comparators, an 8-bit DAC reference, Vector Interrupts, DMA, MAP and DIA memory regions, plus multiple PWM/Signal Measurement Timer modules. The part is qualified for industrial -40C to +85C operation and is part of the PIC18FxxK42 family offering XLP (eXtreme Low Power) sleep modes. A microcontroller (MCU) is a single-chip computer integrating CPU core, program memory (Flash), data memory (SRAM/EEPROM) and programmable peripherals. The PIC18 family uses a Harvard architecture with separate program and data buses, enabling simultaneous instruction fetch and operand access. Within the broader taxonomy, this part sits at: microcontroller -> 8-bit MCU -> PIC18 family -> PIC18FxxK42 sub-family -> 40-pin variants. Compared with 32-bit Cortex-M MCUs, 8-bit PIC18 devices excel at deterministic interrupt latency, low BOM cost and easy C/assembly development, which is why they remain popular in appliance, automotive body and industrial-sensor designs. Key features of the PIC18F45K42-I/MV include: 36 configurable I/O pins, 1x UART/USART, 2x SPI, 2x I2C, hardware DMA, 12-bit ADC2 with up to 35 channels, 5-bit DAC, 2 analog comparators, peripheral pin select (PPS) for flexible routing, and the zero-cross detection module. It supports Core Independent Peripherals (CIPs) such as the CWG, NCO, SMT, CCP and PWM, allowing complex timing and waveform tasks without CPU intervention - a major differentiator over legacy PIC16 designs. The architecture is built around a RISC CPU with a 16-bit instruction word, hardware multiply/divide, and a vectored interrupt controller. The ADC2 module uses post-conversion averaging and automatic threshold comparison, offloading sensor-signal processing from the core. The integrated DMA controller moves data between peripherals and RAM without CPU cycles, reducing active-mode current and freeing the CPU for system-level logic. Device configuration is handled through Flash Configuration Words and Device ID, while the MAP region allows end-of-line calibration values to be stored in a protected area. Typical applications include industrial sensor nodes, low-cost IoT edge devices, home appliance controllers, automotive body and lighting modules, USB-to-UART bridges (using the MSSP/SPI and UART), motor control (PWM + comparator + CWG), and battery-powered metering using XLP sleep modes down to sub-microamp currents. The 40-UQFN package is ideal for space-constrained PCB designs where the 28-pin DIP/PDIP variants are too large but more than 14 pins of GPIO are still required. When designing with this MCU, remember that the 40-UQFN package requires PCB thermal pad soldering for proper electrical and thermal performance. Use MPLAB X IDE with the free XC8 compiler for development, and consider the PIC18F46K42 for higher flash density if 32 KB becomes insufficient during prototyping.

طلب عرض سعر اتصل بنا
PIC18F45K42-I/P - 8-bit 64MHz MCU, 32KB Flash, 40-PDIP | Microchip
PIC18F45K42-I/P

PIC18F45K42-I/P - 8-bit 64MHz MCU, 32KB Flash, 40-PDIP | Microchip

The Microchip Technology PIC18F45K42-I/P is an 8-bit PIC microcontroller running at up to 64 MHz with 32 KB of Flash, 2 KB of RAM and 256 B of EEPROM, housed in a 40-pin PDIP through-hole package for breadboard and socketed designs. What is a PIC18 microcontroller? A PIC18 is a family of 8-bit Harvard-architecture RISC microcontrollers from Microchip Technology that combine a modified Harvard core with rich peripheral integration. PIC18 MCUs sit above PIC16 parts in the Microchip 8-bit portfolio and below the dsPIC/PIC24 16-bit line, forming the workhorse tier for embedded control, IoT edge nodes, automotive body and white-goods applications where deterministic I/O and a familiar toolchain matter more than raw MIPS. Key features include a 12-bit ADC with computation (ADC2), a 5-bit DAC, three op-amps, two comparators, a Complementary Waveform Generator (CWG), multiple PWM channels, Direct Memory Access (DMA), vector interrupts, a Device Information Area (DIA) and a Memory Access Partition (MAP) for bootloader/dual-image partitioning. The K42 family also integrates Core Independent Peripherals (CIPs) that operate without CPU intervention, reducing firmware complexity and improving real-time determinism. The device operates from 2.3 V to 5.5 V on a single supply, supports the eXtreme Low Power (XLP) sleep modes, and offers up to 36 I/O pins plus one input-only pin. It uses a 4PLL clock tree from a 64 MHz internal oscillator, providing instruction-cycle timing down to 62.5 ns. Programming is supported by MPLAB X IDE, XC8 compilers and the PICkit/SNAP/MPLAB ICD programmer family. Typical applications include industrial sensor conditioning, motor and pump control, small-form-factor consumer appliances, LED lighting controllers and home-automation gateways. The 40-pin PDIP form factor remains popular for prototypes, educational kits and low-volume production where through-hole soldering simplifies rework. When designing with this part, allocate the 12-bit ADC2 with adequate acquisition time, de-bounce mechanical inputs in firmware, and respect the 5.5 V absolute maximum on VDD. For migration to surface-mount, the K42 family also offers 40-pin QFN and TQFP packages with the same peripheral set.

طلب عرض سعر اتصل بنا
PIC18F45K42-I/PT - 8-Bit 64MHz XLP MCU 32KB Flash TQFP-44
PIC18F45K42-I/PT

PIC18F45K42-I/PT - 8-Bit 64MHz XLP MCU 32KB Flash TQFP-44

The Microchip Technology PIC18F45K42-I/PT is an 8-bit RISC PIC18 microcontroller running at up to 64 MHz, integrating 32 KB of Flash program memory (16K x 16 words), 2 KB of data RAM, and 256 bytes of Data EEPROM in a 44-pin TQFP (10x10 mm) package with industrial -40C to +85C temperature rating. The device features a rich set of core-independent peripherals (CIPs) including a 12-bit ADC with Computation (ADC2), 8-bit DAC, configurable op amps, comparators, PWM modules, vector interrupts, DMA, and a Device Information Area (DIA). It supports 3.3V and 5V operation from the same wide VDD range, and adds intelligent analog and signal conditioning features that offload the CPU. An 8-bit PIC microcontroller is a Harvard-architecture RISC processor that executes instructions in a single cycle (except branches), with separate program and data buses. In the system hierarchy, the PIC18F45K42 belongs to the microcontroller class of embedded computing devices, which sits under the broader category of microprocessors and semiconductors. The PIC18 family is Microchip's mainstream 8-bit line, optimized for low-power (XLP - eXtreme Low Power) and mixed-signal embedded designs where deterministic real-time control is more important than raw arithmetic throughput. Key features include 32 KB Flash, 2 KB RAM, 256 B EEPROM, up to 64 MHz CPU clock (16 MIPS), 12-bit ADC2, DMA, Configurable Logic Cells (CLC), Complementary Waveform Generator (CWG), numerically controlled oscillator (NCO), and four 16-bit timers. Peripherals communicate via Peripheral Pin Select (PPS), dramatically simplifying PCB routing. The vectored interrupt controller with hardware assist reduces latency for time-critical events. Typical applications include industrial control panels, sensor signal conditioning, motor control with FOC support, IoT edge nodes, smart energy metering, automotive body modules, and human-machine interface (HMI) boards. Designers use the device when they need on-chip analog conditioning alongside an 8-bit control plane without adding an external DSP or ASIC. Designers should enable the ICD pins (PGC/PGD) on every prototype board to keep the ICSP programming/debug path open; also provide a bulk decoupling cap within 10 mm of the VDD pins and use PPS routing to avoid pinout conflicts. The XLP sleep modes can drop quiescent current to the low nA range when battery life dominates the BOM. This page consolidates distributor pricing, drop-in pin-compatible variants, and PCB-level design considerations that are not always visible on a single manufacturer product page or distributor listing.

طلب عرض سعر اتصل بنا
PIC18F45K42T-I/ML - 8-bit 64MHz 32KB Flash MCU 44-QFN
PIC18F45K42T-I/ML

PIC18F45K42T-I/ML - 8-bit 64MHz 32KB Flash MCU 44-QFN

The Microchip PIC18F45K42T-I/ML is an 8-bit PIC18 XLP microcontroller featuring a 64 MHz CPU, 32 KB Flash program memory, 2 KB RAM, and 256 B EEPROM, housed in a 44-pin QFN (8x8 mm) package with exposed thermal pad. It operates from 2.3 V to 5.5 V and offers 36 configurable I/O pins, 12-bit ADC2 with computation, on-chip DAC, comparators, multiple PWM modules, vectored interrupts, and a DMA controller for CPU-independent data movement. The part suffix "T" denotes tape-and-reel packaging and the "I" temperature grade spans -40 C to +85 C industrial range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, non-volatile storage, and a rich set of on-chip peripherals such as ADCs, timers, communication controllers, and GPIO. The PIC18 family sits within Microchip's 8-bit PIC architecture hierarchy (PIC10/12/16/18 -> 8-bit MCU -> microcontroller -> embedded IC) and the K42 sub-family is specifically designed for ultra-low-power XLP applications using eXtreme Low-Power techniques such as idle/doze/sleep modes, peripheral module disable, and nanoWatt XLP technology for battery-driven designs. Key features include the Core Independent Peripherals (CIPs) ecosystem - CLC, SMT, NCO, PWM, and CRC/SCAN - that execute without CPU intervention, the 12-bit ADC2 with automated accumulation, threshold compare, and oversampling, four complementary output generators with hardware dead-band control, and direct memory access between memory and peripherals. The instruction set uses a 16-bit op-code with an 8-bit data path and is backward compatible with the established PIC18 instruction set, simplifying code migration within the family. The device integrates two USART modules, two SPI/I2C MSSP modules, and a 32 kHz LP oscillator for RTC operation, plus a windowed watchdog timer and HLVD (hardware low-voltage detect). This combination makes the K42 suitable for mixed-signal sensor nodes, motor control, smart energy, lighting control, and IoT edge devices where deterministic response and low power are both required. Typical applications include IoT sensor nodes, industrial sensor hubs, low-power wireless controllers (paired with an external radio), HVAC and home-automation user interfaces, BLDC/PMSM motor-control FOCs, and consumer appliances. The wide 2.3-5.5 V range lets the same hardware work from a single-cell Li-Ion pack or a regulated 5 V rail without level shifters. When designing with this part, budget the ADC acquisition and conversion time carefully against your control-loop period, since ADC2 auto-scan plus DMA minimizes CPU load but the application firmware still owns the trigger. Ensure the exposed pad is soldered to a sufficient copper pour for thermal relief at full 64 MHz operation. This page synthesizes distributor pricing, drop-in alternatives, and design considerations not found in the manufacturer datasheet, giving engineers a single reference for sourcing and engineering decisions.

طلب عرض سعر اتصل بنا
PIC18F45K50-I/MV - 8-bit 48MHz 32KB Flash USB MCU | Microchip
PIC18F45K50-I/MV

PIC18F45K50-I/MV - 8-bit 48MHz 32KB Flash USB MCU | Microchip

The Microchip Technology PIC18F45K50-I/MV is a 32KB Flash, 8-bit PIC18 microcontroller operating at up to 48 MHz, housed in a 40-pin UQFN (5x5 mm) package with exposed pad. It integrates a full-speed USB 2.0 transceiver, 2 KB SRAM, 256 B EEPROM, a 25-channel 10-bit ADC, a 5-bit DAC, and three CCP modules plus enhanced USART, SPI, and I2C peripherals, all in the eXtreme Low Power (XLP) family. A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a rich set of on-chip peripherals (timers, ADC/DAC, communication interfaces) onto one silicon die. Within the broader product hierarchy, PIC18F45K50 belongs to the 8-bit PIC18 family -> microcontrollers -> integrated circuits -> semiconductors. Its USB 2.0 Full-Speed (12 Mbps) peripheral sets it apart from non-USB PIC18 cousins and makes it a logical choice for embedded hosts and devices that previously required an external USB transceiver. Key features include an 8x8 hardware multiplier accelerating arithmetic, an internal 48 MHz oscillator tunable against the USB host clock via Active Clock Tuning (eliminates an external crystal in many USB applications), and the nanoWatt XLP technology delivering sleep currents below 50 nA typical. CIP (Core Independent Peripherals) such as CWG, NCO, and DSM offload tasks from the core, while the 32 KB self-write-capable Flash supports bootloader-style field updates without an external programmer. The 40-pin UQFN-EP (5x5 mm) package exposes a thermal pad that improves heat extraction at the higher 48 MHz clock, and the industrial -40C to +85C operating range covers most commercial and industrial embedded products. Migration from the older PIC18F4550 family is pin-compatible for USB D+/D- and most digital I/O, easing retrofits. Typical applications include USB HID/CDC peripherals (mice, keyboards, custom sensors), USB-to-UART bridges, low-power data loggers with on-board ADC, industrial control nodes with RS-485, and consumer appliances with capacitive touch via the CTMU peripheral. Pair the device with a Microchip MCP2200 or direct USB bus-power design. When designing in this part, allocate sufficient decoupling (100 nF plus 1 uF bulk within 5 mm of the VDD pins) and tie the exposed pad to a continuous ground plane for thermal and signal-integrity reasons. Designers migrating from PIC18F4550 must update the Configuration Words because the oscillator and USB settings differ between the two families.

طلب عرض سعر اتصل بنا
PIC18F45K50-I/PT - 8-bit USB MCU, 32KB Flash, 48MHz, TQFP-44 | Microchip
PIC18F45K50-I/PT

PIC18F45K50-I/PT - 8-bit USB MCU, 32KB Flash, 48MHz, TQFP-44 | Microchip

The Microchip Technology PIC18F45K50-I/PT is an 8-bit PIC18 XLP microcontroller integrating a USB 2.0 Full-Speed peripheral, 32 KB of Flash program memory, 2 KB of RAM, and 256 bytes of EEPROM, all in a 44-pin TQFP (10x10 mm) package. It executes instructions at up to 48 MHz (12 MIPS) and operates from 2.3 V to 5.5 V across the industrial -40C to +85C temperature range, making it a strong fit for both USB and legacy 5 V designs. An 8-bit microcontroller (MCU) is a programmable processor that executes one byte of data per instruction cycle and is typically selected for cost-sensitive, deterministic embedded control. Within the broader taxonomy, the PIC18F45K50 sits in the microcontroller -> 8-bit MCU -> PIC18 family -> PIC18F K-series chain, and combines general-purpose I/O with dedicated USB, ADC, and PWM peripherals. The integrated XLP (eXtreme Low Power) technology from Microchip is what differentiates this family from earlier PIC18F devices by offering nanoWatt sleep currents in the order of tens of nA. Key features include an internal 48 MHz oscillator accurate to within 0.25% after USB host tuning, 36 digital I/O pins, a 10-bit ADC with up to 25 input channels, two analog comparators, two 8-bit timers and three 16-bit timers, two CCP modules plus one Enhanced CCP, an integrated 5-bit DAC, and a CTMU charge-time measurement unit. The USB 2.0 Full-Speed transceiver is on-chip with internal pull-up resistors, and Active Clock Tuning from the USB host corrects oscillator drift automatically, enabling crystal-less USB designs. Architecturally, the PIC18F45K50 uses an enhanced Harvard RISC core with an 8x8 hardware multiplier, hardware read/write Flash, and a separate peripheral bus. Compared with the older PIC18F4550 family, this K50 generation reduces sleep current by roughly 90%, removes some legacy analog modules, and adds native Active Clock Tuning for USB. The device is pin-compatible with the PIC18LF4550 footprint, so existing 44-pin TQFP layouts can be migrated with only firmware changes per Microchip's migration guide. Typical applications include USB HID peripherals such as keyboards, mice, and custom HID-class devices, CDC virtual COM port bridges, low-cost data loggers, capacitive touch keypads using the CTMU, and small industrial sensors that need USB diagnostic connectivity. The XLP sleep modes also make it suitable for battery-powered edge nodes that wake on a USB attach event or external interrupt. When designing with this device, budget the VUSB 3.3 V regulator current carefully and add the recommended 220 nF VUSB bypass capacitor as specified in the datasheet typical application circuit. Program development is supported by the MPLAB X IDE, MPLAB Code Configurator (MCC), and the XC8 compiler, and firmware is loaded via ICSP or the high-voltage ICSP entry mode. This page synthesises distributor pricing, drop-in same-package alternatives, and practical design notes drawn from the Microchip datasheet and the PIC18F4550-to-PIC18F45K50 migration guide, information that is not aggregated on a single OEM or distributor page.

طلب عرض سعر اتصل بنا
PIC18F45K50T-I/MV - 8-Bit 48MHz USB MCU 32KB Flash UQFN-40
PIC18F45K50T-I/MV

PIC18F45K50T-I/MV - 8-Bit 48MHz USB MCU 32KB Flash UQFN-40

The Microchip Technology PIC18F45K50T-I/MV is an 8-bit PIC18 XLP flash microcontroller running at up to 48 MHz with 32 KB of program memory, packaged in a 40-pin UQFN (MV) 5x5 mm form factor with exposed pad and shipped on tape and reel. It belongs to the PIC18F45K50 family, which combines a high-performance PIC RISC core with on-chip full-speed USB 2.0, an internal 48 MHz oscillator that can be USB-tuned against the host frame clock, and Microchip's nanoWatt XLP extreme low-power technology for battery-friendly designs. The part carries 256 bytes of true EEPROM, hardware 8x8 multiply, self read/write flash, and a rich peripheral set including enhanced CCP, multiple timers, ADC, comparators, and a 2.0-compliant USB transceiver on-chip. An 8-bit microcontroller (MCU) is a single-chip computer integrating a CPU, RAM, non-volatile program and data memory, and peripherals. Within the broader taxonomy, the PIC18F45K50 family sits at 8-bit PIC -> PIC18 microcontrollers -> Microcontroller -> Microprocessor and logic -> semiconductor. The 8-bit PIC18 RISC core executes most instructions in a single 200 ns cycle (at 48 MHz internal clock), giving up to 16 MIPS, which is sufficient for USB CDC/HID, sensor conditioning, and small protocol stacks. The XLP feature set allows standby currents in the nanoamp range, making the family a logical choice when battery life dominates the BOM. Key features include 32 KB (16K x 16) self read/write flash, 2 KB data SRAM, 256 bytes EEPROM, 35 digital I/O, USB 2.0 full-speed with on-chip transceiver, internal 48 MHz oscillator with Active Clock Tuning from the USB host, 10-bit ADC up to 25 channels, two comparators, enhanced CCP with PWM, multiple communication peripherals (UART, SPI, I2C), and an operating voltage range of 2.5 V to 5.5 V (F-version, F25-F50 series). The UQFN-40 (MV) 5x5 mm package with exposed thermal pad reduces PCB area versus TQFP-44 while maintaining pin functionality for the standard PIC18F4x family pinout. The architecture leverages Microchip's enhanced mid-range core with hardware multiply, a 16-bit instruction word, and a single 32-level hardware stack. Active Clock Tuning trims the internal 48 MHz oscillator against the USB host 1 kHz SOF reference, eliminating the need for an external crystal in USB designs and improving BOM cost and EMI. The on-chip USB 2.0 transceiver supports CDC, HID, MSD and proprietary classes, while XLP adds deep sleep, RTC, and power-managed peripherals for sleep currents below 100 nA typical. Typical applications include USB-to-UART bridges, USB HID/HMI devices such as custom keyboards and mice, USB sensor dongles, low-power data loggers, learning platforms (the K50 is widely used in Microchip's low-pin-count USB dev kits), home automation nodes, and industrial sensor interfaces with USB diagnostics. The wide 2.5 V to 5.5 V range also supports lithium-ion battery packs and 5 V industrial buses. Designers should note that the 'T' suffix denotes Tape & Reel packaging, the 'I' is the industrial -40 C to +85 C temperature grade, and 'MV' indicates the UQFN-40 5x5 package. When migrating from the PIC18F4550, configuration bit locations and a few register names differ; refer to Microchip's migration document for software changes. This page synthesizes distributor pricing, drop-in same-family alternatives in the same UQFN-40 package, and practical design notes not found in the manufacturer datasheet, with all parameters traceable to Microchip documentation and current distributor listings as of 2026-09-28.

طلب عرض سعر اتصل بنا
PIC18F45K80-E/ML - 64MHz 8-bit MCU with ECAN, 32KB Flash | Microchip
PIC18F45K80-E/ML

PIC18F45K80-E/ML - 64MHz 8-bit MCU with ECAN, 32KB Flash | Microchip

The Microchip Technology PIC18F45K80-E/ML is a high-performance 8-bit PIC microcontroller with integrated ECAN (Enhanced Controller Area Network), 32KB (16K x 16) of Flash program memory, and nanoWatt XLP extreme-low-power technology, housed in a 44-pin QFN (8x8 mm) exposed-pad package. It operates from 1.8V to 5.5V, supports a 64MHz system clock (16 MIPS), and includes 35 I/O pins, 3.6KB of RAM, and on-chip 1KB EEPROM. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals on one die. The PIC18 family sits within Microchip's 8-bit MCU hierarchy: PIC10/12/16/18 -> 8-bit PIC -> microcontroller -> embedded processor -> semiconductor. The 'K' family designation denotes nanoWatt XLP low-power operation, while the '80' suffix marks the ECAN-equipped variant, targeting automotive and industrial CAN-bus applications. Key features of the PIC18F45K80 include integrated ECAN 2.0B with six programmable receive/transmit buffers, a 12-bit A/D converter with up to 12 channels, three dedicated transmit buffers, hardware CTMU (Charge Time Measurement Unit) for capacitive touch and precise time measurement, and enhanced PWM/capture/compare peripherals for precision timing. The device supports SPI, I2C, and USART connectivity alongside ECAN, making it suitable for industrial and automotive networking. The device uses an enhanced Harvard RISC architecture with a 16-bit instruction word and an 8-bit data path, achieving 16 MIPS performance at 64MHz. Sleep current is reduced to nanowatt levels through XLP technology, and an internal oscillator option reduces external component count for space-constrained designs. Typical applications include automotive body and chassis ECAN nodes, industrial building control, elevator control systems, HVAC fan control, sensor interfacing, and low-power remote sensor nodes. The combination of ECAN + 12-bit ADC + nanoWatt XLP makes this part particularly well suited for distributed industrial control networks operating on 3.3V or 5V rails. When designing with this MCU, ensure the exposed thermal pad on the QFN package is soldered to a sufficient copper pour (recommended >= 1 sq. inch) to meet thermal and electrical grounding requirements. Programming and debugging are supported via MPLAB X IDE and ICD 3 / PICkit 4 tools. This page synthesizes current distributor pricing, parametric drop-in alternatives, and practical design notes beyond the manufacturer datasheet, giving procurement and embedded engineers a faster selection path.

طلب عرض سعر اتصل بنا
PIC18F45K80-E/PT - 64MHz 8-bit MCU, 32KB Flash, ECAN, TQFP-44 | Microchip
PIC18F45K80-E/PT

PIC18F45K80-E/PT - 64MHz 8-bit MCU, 32KB Flash, ECAN, TQFP-44 | Microchip

The Microchip Technology PIC18F45K80-E/PT is a high-performance 8-bit PIC microcontroller with integrated ECAN, delivering 16 MIPS performance at 64 MHz while operating from 1.8 V to 5.5 V. It integrates 32 KB of Flash program memory, 3.6 KB of RAM, 1 KB of EEPROM, and 35 digital I/O pins in a 44-pin TQFP (10x10 mm) package with exposed pad. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, programmable I/O peripherals, and various communication interfaces. Within the PIC® family hierarchy, the PIC18F45K80 belongs to the PIC18 8-bit advanced MCU class, which sits between 16-bit PIC24/dsPIC parts and the smaller pin-count PIC16 series. nanoWatt XLP™ (eXtreme Low Power) technology places it within Microchip's low-power portfolio, targeting battery and energy-harvesting applications. Key features include a 12-bit ADC with up to 11 channels, a Charge Time Measurement Unit (CTMU) for capacitive touch sensing, three 16-bit timers, two comparators, and an Enhanced Universal Synchronous/Receiver/Transmitter (EUSART). The integrated ECAN module supports CAN 2.0B with six programmable receive/transmit buffers and three dedicated transmit buffers, making the device well suited to in-vehicle networking. The -E suffix denotes the extended operating temperature range of -40 °C to +125 °C. Internal architecture combines a RISC-based PIC18 CPU core with a modified Harvard bus, allowing simultaneous instruction fetch and data access. The integrated ECAN hardware offloads message filtering and arbitration from software, reducing CPU load in multi-node automotive networks. Sleep current is rated in the nano-ampere range, allowing battery-powered nodes to remain dormant for years while still responding to CAN or timer wake-up events. Typical applications include CAN-based automotive body and chassis ECUs, building automation controllers, elevator control systems, capacitive touch human-machine interfaces, industrial sensor nodes, and OBD-II diagnostic interfaces. The 64 MHz core provides sufficient throughput for sensor fusion and CAN message processing in real time. Designers should confirm decoupling (100 nF + bulk) is placed within a few millimeters of the supply pins, route the ECAN TX/RX traces as a differential pair with 120 Ω termination, and use the exposed pad for thermal relief even at modest clock speeds.

طلب عرض سعر اتصل بنا
PIC18F45K80-H/ML - 8-Bit 64MHz MCU, 32KB Flash, ECAN | Microchip
PIC18F45K80-H/ML

PIC18F45K80-H/ML - 8-Bit 64MHz MCU, 32KB Flash, ECAN | Microchip

The Microchip Technology PIC18F45K80-H/ML is a high-temperature-grade 8-bit microcontroller from the PIC18F K80 family, integrating 32 KB of Flash program memory, 3.6 KB of RAM, and 1 KB of EEPROM in a 44-pin VQFN (8x8 mm) exposed-pad package. It runs at up to 64 MHz (16 MIPS) and operates from 1.8 V to 5.5 V, with on-chip ECAN, 12-bit ADC, CTMU touch interface, and nanoWatt XLP ultra-low-power technology. The "-H" suffix denotes the high-temperature variant qualified for extended ambient operation, and the "/ML" suffix specifies the 44-VQFN surface-mount land pattern. An 8-bit microcontroller (MCU) is a single-chip computer optimized for embedded control tasks such as sensor reading, motor actuation, and protocol bridging. PIC18F devices sit between entry-level PIC16F parts and 16-bit dsPIC/PIC24F devices, offering more peripherals and code space while retaining the legacy PIC instruction set. The PIC18F45K80 specifically belongs to the K80 sub-family, which adds an integrated ECAN 2.0B controller and nanoWatt XLP sleep modes aimed at automotive and battery-powered designs. Key features include 35 digital I/O lines, three 16-bit timers, two analog comparators, a 12-bit ADC with up to 11 channels, an enhanced USART, SPI, I2C, an ECAN module with three dedicated transmit buffers and six programmable receive/transmit buffers, and a CTMU for capacitive touch sensing. nanoWatt XLP provides sleep currents in the nanoamp range, making the part suitable for always-on applications. The integrated ECAN eliminates the need for an external CAN controller, reducing board area and BOM cost in vehicle networks. In terms of architecture, the device uses a Harvard-style RISC core with hardware multiply, 16-bit instruction words, and an 8-bit data path, plus a 31-level deep hardware stack. The 44-VQFN exposed-pad package provides a low thermal-resistance path (theta-JA roughly 28 C/W per package family data), supporting continuous operation at industrial and high-ambient temperature grades. Internal oscillator options and a wide 1.8 V to 5.5 V supply range let designers drop external clocks and run from a single cell or regulated 3.3 V rail. Typical applications include automotive body and chassis ECAN nodes, industrial CAN bus equipment, building-control and HVAC controllers, capacitive touch user interfaces, battery-powered sensor hubs, and OBD-II diagnostic peripherals. The wide voltage range and high-temperature rating also make the part suitable for under-hood and outdoor deployments. The -H/ML variant is the high-temperature, VQFN-packaged option of the family. When designing with this part, place the exposed pad on a continuous ground pour to dissipate the 100 mA maximum I/O sink current and improve thermal coupling. Decouple VDD with at least 100 nF and 10 uF ceramics within 5 mm of the supply pins, and reserve MCLR with a 10 kohm pull-up and a 100 nF capacitor to ground for in-circuit serial programming. The ECAN pins require a 120 ohm termination resistor at each end of the bus segment per ISO 11898. This page synthesizes DigiKey/Mouser distributor pricing, drop-in VQFN-44 alternatives from the same K80 family, comparison data versus PIC18F45K42-I/ML, and practical design notes not found in the manufacturer datasheet alone.

طلب عرض سعر اتصل بنا
PIC18F45K80-H/PT - 8-bit MCU, 64MHz, 32KB Flash, ECAN, TQFP-44 | Microchip
PIC18F45K80-H/PT

PIC18F45K80-H/PT - 8-bit MCU, 64MHz, 32KB Flash, ECAN, TQFP-44 | Microchip

The Microchip Technology PIC18F45K80-H/PT is a high-temperature, 8-bit PIC microcontroller built on the PIC18F family core, delivering 64 MHz (16 MIPS) performance with 32 KB of Flash program memory in a 44-pin TQFP (10x10 mm) package. It features an integrated ECAN (Enhanced Controller Area Network) module with six programmable receive/transmit buffers, three dedicated transmit buffers, and a charge time measurement unit (CTMU) for capacitive-touch user interfaces. The device operates from 1.8 V to 5.5 V with nanoWatt XLP extreme-low-power modes, making it suitable for energy-conscious applications. A 12-bit ADC with advanced analog interface, multiple timers, enhanced compare/capture/PWM modules, and 35 digital I/O lines round out its peripheral set, while the -H temperature grade marks it for high-temperature environments beyond the standard industrial -40 C to +85 C range. A microcontroller (MCU) is a single-chip computer that integrates a CPU, volatile and non-volatile memory, and configurable peripherals around a shared bus. The PIC18F is an enhanced 8-bit Harvard-architecture MCU family from Microchip with a RISC-style instruction set, hardware multiply, and 16-bit instruction words. Within the broader microcontroller taxonomy, the PIC18F45K80 belongs to the PIC18 K-series, distinguished by the K80 family's combination of ECAN, nanoWatt XLP, and CTMU peripherals tailored for automotive, building, elevator, and capacitive-touch designs. Key features include integrated ECAN with flexible buffer configuration, 32 KB Flash supporting self-programmability via runtime write capability, 3.6 KB RAM, 1 KB EEPROM, an internal oscillator selectable up to 64 MHz, and a 12-bit ADC supporting touch sensing via the CTMU. Three dedicated ECAN transmit buffers, FIFO or standard buffer modes, and programmable filtering add robustness to CAN bus workloads. The combination of ECAN and nanoWatt XLP enables sensor and actuator nodes that wake from CAN traffic, prolonging battery life in remote field installations. Architecturally, the PIC18F45K80 uses a modified Harvard memory layout with separate program and data buses, a 32-level hardware stack, and a 16-bit instruction path that delivers predictable interrupt latency. The ECAN module implements CAN 2.0B with 29-bit identifiers and is ISO 16845 certified for conformance at the protocol layer, while the nanoWatt XLP technology reduces sleep current to nanoampere levels and supports multiple wake sources including INT, RTCC, and watchdog. Typical applications include building automation (HVAC, lighting, occupancy), elevator controllers, automotive CAN nodes, capacitive-touch user interfaces, and industrial sensors that must operate from battery power. The wide 1.8 V to 5.5 V supply range allows direct connection to 3.3 V sensors or 5 V actuator drivers without level shifters, simplifying analog front-end design. When designing with this MCU, budget carefully for the 44-pin TQFP package's fine 0.8 mm pitch, which requires careful PCB layout, and verify that the VDD rise-time specification (tVDDR) is met to ensure proper POR behavior. Choosing the -H grade part (vs -I or -E variants) gives extended high-temperature operation beyond +85 C and is the key consideration for this part number. This page synthesizes distributor pricing, drop-in alternatives, and PCB design notes not found in the manufacturer datasheet.

طلب عرض سعر اتصل بنا
PIC18F45K80-I/P - 8-bit MCU, 32KB Flash, ECAN, XLP | Microchip
PIC18F45K80-I/P

PIC18F45K80-I/P - 8-bit MCU, 32KB Flash, ECAN, XLP | Microchip

The Microchip Technology PIC18F45K80-I/P is a high-performance 8-bit PIC18 microcontroller with integrated ECAN, 32KB of Flash program memory, and 4KB of RAM, housed in a 40-pin PDIP (DIP-40) through-hole package. It executes instructions at up to 16 MIPS from a 64 MHz internal oscillator, and operates from 1.8 V to 5.5 V across the industrial -40 C to +85 C temperature range. The -I/P suffix denotes the industrial temperature grade and PDIP package. A microcontroller (MCU) is a single-chip computer containing a CPU, non-volatile program memory, working RAM, and programmable peripherals. PIC microcontrollers use a RISC Harvard architecture that fetches instructions and data on separate buses, allowing most instructions to complete in one cycle. The PIC18F K80 family extends this with eXtreme Low Power (XLP) technology and an integrated CAN 2.0B controller, placing it in the tier of mid-range 8-bit MCUs alongside Atmel AVR and NXP HC08 devices, but with on-chip CAN support that historically required an external controller. Key features include 12-bit A/D conversion across 11 channels, 5 PWM outputs, 9 enhanced Capture/Compare/PWM modules, 2 analog comparators, an integrated Charge Time Measurement Unit (CTMU) for capacitive touch, and nanoWatt XLP sleep modes that drop supply current into the nanoamp range. ECAN hardware accelerates CAN 2.0A/B frame handling, freeing the CPU from bit-banging. The device uses a modified Harvard architecture with a 16-bit instruction word and 8-bit data path, plus an 8x8 hardware multiplier and 16x16 accumulator that accelerates DSP-style math without a separate DSP engine. EEPROM emulation is supported via Flash self-write, and the ICSP interface allows in-circuit programming and debugging. Typical applications include CAN-based automotive body controllers, building automation gateways, elevator control panels, industrial sensor nodes, capacitive touch user interfaces, and low-power remote sensor stations. The combination of ECAN, XLP sleep, and 12-bit ADC makes the PIC18F45K80 particularly attractive for distributed nodes that sleep most of the time and wake briefly to transmit. When designing with this part, place a 100 nF decoupling capacitor as close as possible to each VDD/VSS pair, and follow Microchip AN1229 (Low-Power Design Guide) for sleep current budgeting. Note that the -I/P industrial variant is pin-compatible with the -E/P extended temperature grade but specified only to +85 C, not +125 C. This page synthesizes distributor pricing, drop-in package-compatible alternatives, and practical design notes that go beyond what is in the bare Microchip datasheet, including same-package variants and the closest cross-brand 8-bit MCUs that fit the same 40-pin PDIP footprint.

طلب عرض سعر اتصل بنا
PIC18F45K80-I/PT - 8-bit 64MHz MCU 32KB Flash ECAN 44-TQFP | Microchip
PIC18F45K80-I/PT

PIC18F45K80-I/PT - 8-bit 64MHz MCU 32KB Flash ECAN 44-TQFP | Microchip

The Microchip Technology PIC18F45K80-I/PT is an 8-bit PIC microcontroller in the PIC18F K80 family featuring integrated ECAN, nanoWatt XLP extreme low-power technology, 32 KB of Flash program memory, 3.6 KB of RAM, and a 12-bit ADC with CTMU, housed in a 44-pin TQFP package. It runs at up to 64 MHz (16 MIPS) over a 1.8 V to 5.5 V supply range, targeting automotive, building-control, and elevator-control applications where low sleep current and CAN connectivity are required. An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, a Flash program store, on-chip RAM, peripherals (timers, ADC, communication controllers), and a CPU that executes one instruction per cycle. PIC18F devices extend the baseline PIC16 architecture with a 16-bit instruction word, hardware multiply, linear code space, and C-friendly peripheral sets, making them a frequent choice for cost-sensitive embedded control in the PIC microcontroller family -> 8-bit MCU -> microcontroller -> embedded IC hierarchy. Key features include 32 KB Flash (16K x 16), 4 KB RAM, 1 KB EEPROM, 10-bit ADC plus dedicated 12-bit ADC channels, three ECAN modules with DMA, seven CCP/ECCP modules, four 8/16-bit timers, two MSSP (I2C/SPI) ports, two USART modules, and nanoWatt XLP sleep currents below 100 nA in selected modes. The 44-pin TQFP (10x10 mm) provides up to 35 digital I/O pins plus 12 analog-capable pins. The K80 architecture pairs a RISC-style PIC18 core with Microchip's eXtreme Low-Power techniques (deep sleep, low-power Timer1, internal 16 MHz HFINTOSC) and an on-chip Charge Time Measurement Unit (CTMU) used for capacitive touch, temperature scanning, and time-of-flight-style measurements. Hardware ECAN 2.0B with DMA offloads message filtering from the core, freeing CPU bandwidth for application logic. Typical applications include automotive body and chassis ECAN nodes, building automation and elevator controllers, industrial CAN nodes, capacitive-touch human interfaces using CTMU, and low-power battery-backed sensor hubs. The wide 1.8 V to 5.5 V range also supports USB-less 5 V designs and single-cell Li-ion (3.7 V nominal) platforms without level shifters. When designing with this part, allocate one ECAN module to the bus, reserve the CTMU for touch or analog scanning, and budget Flash for bootloader plus application. For automotive deployments, choose the -I/PT industrial grade or upgrade to the AEC-Q100-qualified PIC18F46K80 family variant when required. This page consolidates distributor pricing, drop-in replacement guidance, and design notes that are not collated in the manufacturer datasheet, accelerating sourcing and board bring-up.

طلب عرض سعر اتصل بنا
PIC18F45K80T-I/ML - 8-Bit 64MHz MCU w/ ECAN & 32KB Flash | Microchip
PIC18F45K80T-I/ML

PIC18F45K80T-I/ML - 8-Bit 64MHz MCU w/ ECAN & 32KB Flash | Microchip

The Microchip Technology PIC18F45K80T-I/ML is a high-performance 8-bit RISC microcontroller from the PIC18F K80 family with integrated ECAN, 32 KB (16K x 16) of Flash program memory, 3.6 KB of data RAM, and 1 KB of EEPROM, packaged in a 44-pin VQFN (8 mm x 8 mm) with an exposed thermal pad. It executes instructions at 64 MHz (16 MIPS) across a 1.8 V to 5.5 V operating range and integrates nanoWatt XLP extreme low-power technology for sleep currents suitable for battery-backed and energy-harvesting designs. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and a rich set of digital and analog peripherals in one IC. The PIC18F family uses an enhanced Harvard RISC architecture with separate program and data buses, allowing instruction fetch and operand read in the same cycle. Within the broader taxonomy, the PIC18F45K80 sits under 8-bit MCU -> microcontroller -> embedded processor -> semiconductor. ECAN is Microchip's enhanced implementation of the Controller Area Network (CAN) bus protocol originally specified by Bosch ISO 11898, widely used in automotive and industrial networks. Key features include an integrated 12-bit ADC with up to 11 channels, a CTMU (Charge Time Measurement Unit) for capacitive touch and time-of-flight measurements, three 16-bit timers, two MSSP (SPI/I2C) ports, two Enhanced USART modules (one with ECAN), and a 16-bit Enhanced PWM with up to 4 channels. The device supports 35 digital I/O lines and operates from -40 C to +85 C (industrial grade). The PIC18F45K80T-I/ML is used in automotive body and comfort modules, building control (HVAC, lighting, elevators), industrial automation nodes, and CAN-bus sensor interfaces where ECAN peripheral, 12-bit ADC accuracy, and XLP sleep current below 100 nA together reduce BOM cost. Compared with discrete microcontroller + external CAN controller designs, integrating ECAN saves PCB area, lowers BOM cost, and simplifies firmware drivers through Microchip's free MPLAB X IDE and XC8 toolchain. When designing with this part, place a 100 nF decoupling capacitor as close as possible to each VDD/VSS pair, tie the exposed thermal pad to a clean ground plane for thermal and electrical performance, and use the internal LDO or external regulator carefully because the wide 1.8 V to 5.5 V range allows direct Li-ion or 3.3 V system supply.

طلب عرض سعر اتصل بنا
PIC18F45K80T-I/PT - 8-bit 64MHz MCU 32KB Flash ECAN 44-TQFP
PIC18F45K80T-I/PT

PIC18F45K80T-I/PT - 8-bit 64MHz MCU 32KB Flash ECAN 44-TQFP

The Microchip Technology PIC18F45K80T-I/PT is a high-performance 8-bit PIC18 microcontroller featuring an integrated ECAN (Enhanced Controller Area Network) module, nanoWatt XLP (eXtreme Low Power) technology, and 32KB (16K x 16) of Flash program memory in a 44-pin TQFP (10x10 mm) package. Key features include a 64MHz internal oscillator, 35 digital I/O pins, 3.6KB of SRAM data memory, 1KB of EEPROM, a 12-bit ADC with Charge Time Measurement Unit (CTMU), and an operating voltage range of 1.8V to 5.5V. The device executes instructions at 16 MIPS (Million Instructions Per Second) under typical conditions. The PIC18F45K80 belongs to Microchip's PIC18 XLP 18K family, which is a subfamily of 8-bit microcontrollers within the broader PIC microcontroller taxonomy (PIC microcontroller -> MCU -> microprocessor -> semiconductor). The XLP designation indicates nanoWatt technology with sleep currents measured in nanoamps, making this family well-suited to battery-powered and energy-harvesting designs. The integrated ECAN module supports CAN 2.0B with six programmable receive/transmit buffers and three dedicated transmit buffers, eliminating the need for an external CAN controller in automotive and industrial networked applications. Typical applications include automotive body and chassis ECAN nodes, building climate and elevator controllers, industrial sensor nodes, and battery-powered remote monitoring with CAN connectivity. The 1.8V minimum supply voltage allows operation directly from a single lithium cell across most of its discharge curve, while 5.5V tolerance supports industrial 5V rails. Designers should note that the PIC18F45K80T-I/PT is the tape-and-reel (T) and industrial temperature (-I/-40C to +85C) variant. Pin-compatible family members with different flash densities, temperature grades, and packaging options are available for cost optimization. The microcontroller requires MPLAB X IDE and a compatible programmer such as PICkit or ICD for firmware development.

طلب عرض سعر اتصل بنا
PIC18F45Q10-E/P - 8-Bit 64MHz 32KB FLASH 40-PDIP MCU | Microchip
PIC18F45Q10-E/P

PIC18F45Q10-E/P - 8-Bit 64MHz 32KB FLASH 40-PDIP MCU | Microchip

The Microchip Technology PIC18F45Q10-E/P is an 8-bit PIC microcontroller in the PIC18F2x/4x/5xQ10 family, integrating 32KB of FLASH program memory, 64MHz maximum CPU clock, and 5V operation in a 40-pin PDIP through-hole package. The Q10 family targets robust, real-time control and sensor-node applications, providing 5V-tolerant I/O for higher noise immunity compared to typical 3.3V MCUs. Background: A microcontroller (MCU) is an integrated circuit that combines a CPU core, non-volatile program memory (FLASH/ROM), volatile data memory (RAM), and a rich set of peripheral blocks (timers, ADC, communication interfaces) on a single silicon die. Within the MCU taxonomy, the PIC18F45Q10 belongs to the 8-bit family (PIC18 core) > enhanced mid-range with nanoWatt XLP power management > PIC18-Q10 sub-family > 40-pin variants. The Functional Safety (FuSa) family designation signals that the device includes diagnostics and documentation suitable for IEC 60730 class B safety functions in household appliances. Key features of the PIC18F45Q10 include a 10-bit ADC with Computation (ADC2) supporting averaging, filtering, and Capacitive Voltage Divider (CVD) for touch sensing, Configurable Logic Cells (CLCs) for hardware-level glue logic, Complementary Waveform Generator (CWG) with auto-shutdown, and multiple Core-Independent Peripherals (CIPs) such as EUSART, MSSP (I2C/SPI), and 16-bit PWM with multiple capture/compare channels. The device operates from 1.8V to 5.5V (F-version, extended) and is offered in the -40C to +125C extended industrial temperature range, denoted by the -E suffix. The PIC18F45Q10 uses an enhanced Harvard architecture with a 16-bit instruction word and an 8-bit data path, executing most instructions in one instruction cycle (4 clock periods). Internal oscillator flexibility (32kHz-64MHz HFINTOSC), programmable PLL, and nanoWatt XLP sleep modes (< 100 nA typical) make the part attractive for battery- or energy-harvesting sensor nodes where quiescent draw dominates the energy budget. Typical applications include industrial control sensor nodes, consumer appliances requiring IEC 60730 class B functional safety (white goods, washing machines, dishwashers), touch-sensing human-machine interfaces using the CVD peripheral, low-power IoT end-nodes with sleep duty cycling, and small motor-driver companions with the CWG and PWM peripherals. The 5V I/O is also valued for retrofitting legacy 5V systems. When designing with this device, allocate decoupling capacitors (100 nF per VDD pin, plus a bulk 10 uF) close to the IC, route MCLR with proper pull-up, and reserve an ICSP header on the PCB for in-circuit programming and debugging. The Q10 family's CIPs can offload tasks traditionally handled in firmware, reducing CPU wake-up frequency. This page synthesizes distributor pricing, drop-in alternatives, design notes, and AEO-optimized FAQ not found in the manufacturer datasheet alone, providing engineers and procurement teams a single reference for part selection.

طلب عرض سعر اتصل بنا