উপশ্রেণী

পণ্য (44,000+)

USB2228-NU-11 - USB 2.0 Flash Media Controller | Microchip
USB2228-NU-11

USB2228-NU-11 - USB 2.0 Flash Media Controller | Microchip

Microchip Technology USB2228-NU-11 is a fourth-generation USB 2.0 flash media controller with integrated card power FETs, operating from a 3.3 V supply in a 128-pin TQFP surface-mount package measuring 14 mm by 14 mm. It provides the interface between a USB host controller and flash media cards while handling the electrical requirements of card detection and card power delivery. A USB flash media controller is a specialized interface IC that bridges a USB host with removable or embedded flash storage. Within the product hierarchy, it is a USB interface controller, an interface IC, and ultimately a semiconductor. The USB2228 family combines USB-to-flash-media interfacing with on-chip card power control, reducing the amount of external circuitry required in systems that expose flash-card storage through a USB connection. The verified product information identifies USB 2.0 support, fourth-generation controller technology, integrated card power FETs, and a 3.3 V operating supply. The manufacturer product page also identifies support for the xD-Picture Card format for licensees of that format. These features position the device for USB storage readers, embedded media systems, portable electronics, and data-transfer equipment that requires dedicated flash-media interface circuitry. The USB2228 operates between an external USB host controller and the flash-media side of the design. Its integrated card power FETs manage the power path associated with supported media cards, while on-chip firmware supports reading and writing operations. Compared with a general-purpose USB host controller, this specialized architecture can reduce host-side media-handling complexity and concentrate card-interface logic in a dedicated controller. Typical applications include USB flash-card readers, compact card-access systems, embedded storage products, and legacy or specialized portable devices using USB 2.0 media connectivity. Design selection should account for the 3.3 V supply requirement, the 128-pin footprint, supported media formats, USB host-controller compatibility, and the card power requirements of the target product. The most important implementation check is the physical interface. The component uses a 128-pin, 14 mm by 14 mm TQFP package, so layout and assembly plans must use the exact manufacturer pinout and land pattern rather than a generic 128-pin symbol. Input, output, power, ground, card-power, and configuration connectivity must also be verified against the manufacturer documentation. This page consolidates verified manufacturer and distributor information, distinguishes the available same-family replacement from unverified alternatives, identifies missing technical data without guessing, and provides practical selection and integration guidance for engineers evaluating USB2228-NU-11.

RFQ যোগাযোগ
USB2228AHZS07 USB 2.0 Flash Media Controller | SMSC
USB2228AHZS07

USB2228AHZS07 USB 2.0 Flash Media Controller | SMSC

The SMSC USB2228AHZS07 is an application-specific microcontroller configured as a fourth-generation USB 2.0 flash media controller with an integrated card interface. It is identified in the 26-page USB2228 datasheet and is supplied in an unspecified surface-mount package. Its core role is to provide a USB host-facing storage interface for flash-memory cards, combining USB connectivity, media-card control, and configuration logic in one integrated circuit. An application-specific microcontroller is a specialized semiconductor optimized for a defined set of system functions rather than general-purpose software execution. Within the product hierarchy, this device belongs to the microcontroller and embedded-controller class, while its specific application places it in the flash media controller category. This integration can reduce the number of discrete components required between a USB port and a removable flash card. The fourth-generation controller architecture identifies the USB2228 family as a dedicated USB 2.0 storage solution. USB 2.0 provides a standardized host-to-controller interface, while the integrated card functionality manages communication with supported removable flash media. The part is specifically listed by Rochester Electronics as an application-specific microcontroller from SMSC, and market listings associate the device with a 26-page manufacturer datasheet. Designing with this controller requires attention to the USB host interface, card electrical requirements, supported media formats, embedded firmware, and the exact package dimensions. Because the device is application-specific, its operational behavior is typically determined by its internal firmware and board configuration rather than by a general-purpose processor application. Designers should preserve the reference network, clocking arrangement, power sequencing, and card-detection implementation used by the manufacturer. Typical uses include USB flash-card readers, card-reader appliances, portable storage accessories, embedded storage gateways, and host systems that require direct access to removable flash media. In each case, the controller handles the USB-to-card interface while the surrounding circuit supplies regulated power, termination, protection, and the physical media connector. The principal design trade-off is integration versus upgrade flexibility. A dedicated flash media controller can simplify the USB storage path, but it is less versatile than a general-purpose microcontroller. Validate the supported card types, transfer modes, firmware configuration, package land pattern, and signal-routing requirements before releasing a new PCB layout. This product record combines the exact USB2228AHZS07 identification, manufacturer description, package-related uncertainty, verified source links, and application-oriented engineering guidance. It also separates confirmed attributes from parameters that require confirmation against the manufacturer datasheet, helping engineers plan sourcing and hardware review without obscuring unresolved design assumptions.

RFQ যোগাযোগ
USB2229-NU-02 - USB 2.0 Card Reader Controller | Microchip
USB2229-NU-02

USB2229-NU-02 - USB 2.0 Card Reader Controller | Microchip

Microchip Technology USB2229-NU-02 is a fifth-generation USB 2.0 flash-media and IrDA controller with a 3.3 V supply, IrDA 1.1 parallel interface, and integrated card power FETs in a 128-pin TQFP package measuring 14 x 14 mm. It provides one USB host interface for mainstream flash-card media and includes IrDA controller capability. A USB flash-media controller is a mixed-signal interface semiconductor that bridges a USB host and removable flash storage. It belongs to the controller hierarchy: USB interface controller, peripheral interface IC, digital and analog mixed-signal IC, and ultimately semiconductor. By converting host USB traffic into media-specific commands and coordinating card power, this device reduces the processing burden placed on an external system controller. The verified feature set includes fifth-generation USB 2.0 operation, support for mainstream flash-card interfaces, IrDA 1.1 with a parallel interface, integrated card power FETs, and operation from a 3.3 V supply. The 128-pin TQFP package provides the mixed analog, digital, logic, power-management, and external media-interface connections required by this multifunction controller. According to Microchip Technology, USB2229-NU-02 is identical to the USB2230 except that USB2230 adds xD-Picture Card support. This distinction is important in drop-in evaluation: a USB2230 can offer broader media compatibility, but software, firmware, card-support tables, and board requirements must be reviewed before substitution. The IrDA and parallel-interface requirement must also match the target design. Typical uses include USB card readers, multifunction peripherals that combine storage with infrared communication, and embedded systems that need to expose flash media through a USB 2.0 host connection. The integrated card power FETs simplify card-interface power management, while the IrDA block supports infrared data communication in designs that require both functions. Designers should verify the complete 128-pin pinout, supported card standards, electrical timing, and firmware support against the manufacturer datasheet before layout or firmware work. Because the package contains many mixed-signal and high-speed USB functions, careful grounding, card-interface isolation, power sequencing, and signal-integrity review remain essential. This product page consolidates verified manufacturer and distributor information, packaging details, functional comparisons, application guidance, and design cautions. It also distinguishes documented drop-in candidates from unsupported cross-brand alternatives, helping engineers make an evidence-based replacement decision without assuming that every USB card controller is electrically or firmware compatible.

RFQ যোগাযোগ
USB2230-NU-02 - USB 2.0 Flash Media & IrDA Controller | Microchip
USB2230-NU-02

USB2230-NU-02 - USB 2.0 Flash Media & IrDA Controller | Microchip

The Microchip Technology USB2230-NU-02 is a USB 2.0 interface controller for flash media and IrDA connectivity, supplied in a 128-TQFP 14 x 14 mm package. It operates from a 3.0 V to 3.6 V supply, has a specified supply current of 30 mA, and supports both USB and IrDA interfaces. The controller also provides integrated card power FETs for compatible flash-media connections. A USB host interface controller is a semiconductor that bridges a USB port and one or more peripheral interfaces. In the broader hierarchy, USB2230-NU-02 belongs to interface controllers, interface ICs, and integrated circuits. Its two principal interface functions are USB 2.0 host connectivity and IrDA infrared data communication, allowing one controller to serve systems that need both wired USB and short-range optical data paths. The main verified feature set includes USB 2.0 operation, parallel and serial interface support, IrDA controller functionality, flash-media controller functionality, a 3.0 V to 3.6 V operating supply range, 30 mA supply current, and integrated card power FETs. The 128-TQFP package provides 128 external connection points in a 14 x 14 mm body, making it appropriate for embedded equipment with sufficient board area for a high-pin-count surface-mount controller. The USB2230 is identified by Microchip as a fifth-generation USB 2.0 composite device. It interfaces a single USB host port with mainstream flash-card media interfaces and also includes an IrDA controller. Its integrated card power FETs can simplify power-delivery arrangements for supported media interfaces, while its composite architecture can reduce the need for separate controllers when a product must support USB media access and infrared communication. Typical applications include multifunction printers, media readers, docking stations, portable data-transfer equipment, embedded USB hosts, and industrial or communications equipment that combines removable flash storage with IrDA. In these systems, USB 2.0 provides the connection to a host computer, while the flash-media interface handles card access and the IrDA block provides infrared communication. The integrated card power FETs are especially relevant where the attached media interface requires controlled card-power delivery. Designers should verify the complete pin configuration, signal mapping, clocking requirements, media-interface implementation, and card-power topology against the manufacturer datasheet before layout release. Because this controller uses a 128-TQFP package and connects external flash media through dedicated pins, routing, return paths, and connector placement can materially affect implementation complexity. The verified data also identifies the part as obsolete, so new production designs should confirm availability and lifecycle strategy before committing to the MPN. This product page consolidates verified distributor pricing, package information, interface capabilities, source links, and same-family drop-in candidates into an engineering-oriented reference. It also distinguishes confirmed specifications from fields that still require datasheet confirmation, making the information more useful for lifecycle review, footprint assessment, and replacement planning.

RFQ যোগাযোগ
USB2240-AEZG-05 - USB 2.0 Flash Media Controller
USB2240-AEZG-05

USB2240-AEZG-05 - USB 2.0 Flash Media Controller

Microchip Technology USB2240-AEZG-05 is a USB 2.0 multi-format flash media controller that provides an interface between a USB host controller and flash memory cards. The device operates from a 3.3 V supply and is packaged in a surface-mount 36-QFN package measuring 6 mm by 6 mm with an exposed pad. Its specialized role is to translate host-side USB traffic into commands and data transfers for supported flash-media formats. A USB flash media controller is an interface IC within the broader semiconductor hierarchy of USB controllers, interface controllers, and data-conversion devices. The controller sits between a USB host and removable or embedded flash storage. Its functions include media detection, command translation, data transfer, and USB-to-flash protocol bridging, allowing a USB host to access compatible media through standardized USB connectivity. The USB2240 family supports common flash-media families identified by the manufacturer as SD, MMC, and Memory Stick. The USB2240-AEZG-05 is specifically identified as an ultra-fast USB 2.0 multi-format SD/MMC and MS flash media controller. USB 2.0 provides backward-compatible connectivity with USB hosts, while the integrated media interface reduces the need for external controller components in compact embedded equipment. System integration requires a 3.3 V operating supply and careful implementation of the USB, flash-media, clock, and power interfaces. The 36-QFN package has 36 electrical positions plus an exposed thermal and ground pad, enabling compact layouts with improved heat spreading. Exposed-pad assembly requires a suitable land pattern, stencil design, and reflow profile so that the pad receives adequate solder during manufacturing. Typical applications include USB-connected portable media equipment, digital cameras, consumer appliances, industrial data acquisition systems, and embedded systems that read or write compatible flash media. In these systems, the USB2240-AEZG-05 reduces the host processor workload by handling flash-media command translation locally and presenting a standard USB interface to the rest of the equipment. Designers should confirm the exact supported media types, electrical characteristics, pin assignments, clock requirements, and initialization sequence in the manufacturer datasheet before layout release. The Microchip USB2240 hardware design checklist is also a useful reference for I2C EEPROM configuration, vendor and product identifiers, product string descriptors, and other board-level implementation considerations. This product page combines the USB2240 family architecture with package, sourcing, compatibility, and design guidance. It provides practical assistance for USB interface implementation, exposed-pad PCB layout, media-controller selection, and drop-in replacement assessment.

RFQ যোগাযোগ
USB2240-AEZG-06 - USB 2.0 Flash Media Controller | Microchip
USB2240-AEZG-06

USB2240-AEZG-06 - USB 2.0 Flash Media Controller | Microchip

The Microchip Technology USB2240-AEZG-06 is a USB 2.0 multi-format flash media controller with USB Hi-Speed host connectivity, support for SD, MMC, MS, and xD media, and a 36-pin QFN package measuring 6 x 6 mm. It provides a dedicated interface between a USB host controller and removable flash-memory cards. A flash media controller is a semiconductor that translates commands between a host-side USB interface and one or more flash-card standards. The USB2240 belongs to the broader hierarchy of interface controllers, USB interface ICs, and semiconductor solutions for removable data storage. Its multi-format architecture is intended to simplify card-reader equipment that must support several generations and families of flash media. The controller supports USB 2.0 high-speed operation and the principal media formats identified by the manufacturer, including Secure Digital, MultiMediaCard, Memory Stick, and xD-Picture Card devices. Configuration data can be stored in an external I2C EEPROM of up to 512 bytes, allowing customizable vendor and product identifiers, serial numbers, and USB string descriptors. The USB2240-AEZG-06 is specified for a 3 V to 3.6 V operating-supply range and uses a compact 36-pin QFN package. This low-voltage integration suits desktop and notebook computer accessories, card readers, portable storage equipment, and embedded USB storage systems. The 6 x 6 mm package helps limit board area where multiple storage interfaces or connectors must coexist. A typical implementation places the USB2240 between the system USB host controller and a flash-card connector assembly. Signal routing must preserve USB impedance characteristics and isolate noisy card-support circuitry from sensitive host-side data paths. Firmware also needs to identify connected media correctly because SD, MMC, MS, and xD devices have different command and status behavior even though they share a broader flash-memory heritage. Designers should follow the USB2240 Hardware Design Checklist when assigning power, clocking, interface routing, card insertion detection, and EEPROM programming. The external EEPROM, when required by the product configuration, also becomes part of the device identity plan and should be allocated and programmed before production. PCB layout should minimize differential-pair discontinuities and keep the exposed thermal pad electrically and thermally handled according to the manufacturer land pattern. This product page combines the controller's stated media-format support, package details, configuration requirements, and practical hardware guidance with a structured comparison to same-package family devices. It also identifies the engineering boundaries that matter when evaluating a replacement, particularly USB speed, supported card formats, package compatibility, and configurable descriptor EEPROM requirements.

RFQ যোগাযোগ
USB2240I-AEZG-06 USB 2.0 Multi-Format Flash Media Controller
USB2240I-AEZG-06

USB2240I-AEZG-06 USB 2.0 Multi-Format Flash Media Controller

The Microchip Technology USB2240I-AEZG-06 is a USB 2.0 multi-format flash media controller that provides an ultra-fast interface between a USB host controller and flash memory cards. It is packaged in a 36-pin QFN (6x6 mm) package with an exposed pad, operates from a 3.0 V to 3.6 V core supply (3.3 V nominal), and supports the full USB 2.0 high-speed and full-speed protocol set. What is a flash media controller? A flash media controller is a dedicated interface IC that sits between a USB host controller and a physical card connector, translating USB traffic into the native command set of removable flash media. In the device hierarchy it belongs to the interface IC family, which sits above general-purpose logic and below complete USB connectivity solutions. The USB2240 family extends the Microchip USB224x line of Hi-Speed USB 2.0 controllers covering the most popular flash media card families. Key features of this device include comprehensive USB 2.0 compliance, support for SD, MultiMediaCard (MMC) and Memory Stick (MS) media families in a single controller, and operation across the 3.0 V to 3.6 V supply range. Because multiple card standards are handled by one silicon device, designers avoid the cost and board area of adding parallel single-format reader controllers to each connector. The controller is part of the USB224x family, whose architecture is organized around a dedicated media interface engine and a USB device engine. This separation allows card enumeration, media identification and transfer protocol handling to proceed independently of USB bus traffic, so card insertion and removal do not disturb the host enumeration sequence. Typical applications include multi-format card readers for desktop PCs, notebook computers, digital cameras and portable devices, USB storage dongles, and embedded set-top or industrial data-acquisition equipment that must accept SD, MMC and MS cards through a single USB port. Design consideration: this controller is a 3.3 V device, so a system that powers the USB port from a 5 V rail must derive a clean 3.3 V rail for the core supply and I/O buffering. Decoupling should follow the layout and capacitor recommendations in the manufacturer datasheet, and the exposed pad must be tied to ground with a thermal and electrical via array to limit junction temperature. This page brings together manufacturer product information, package and ordering detail, drop-in alternatives in the same 36-QFN footprint, and practical layout and thermal guidance that is not consolidated in a single manufacturer document.

RFQ যোগাযোগ
USB2241-AEZG-05 - USB 2.0 Flash Media Controller | Microchip
USB2241-AEZG-05

USB2241-AEZG-05 - USB 2.0 Flash Media Controller | Microchip

Microchip USB2241-AEZG-05 is a USB 2.0 multi-format flash media controller with a parallel interface, 3 V to 3.6 V supply range, and 36-QFN-EP package measuring 6 mm by 6 mm. The controller bridges a USB host with flash media and is identified by the manufacturer as a USB2.0 Multi-Format Flash Media Controller. Its typical supply current is 135 mA, while its interface architecture supports USB 2.0 high-speed connectivity. A flash media controller is a specialized interface IC that manages communication between a USB host and removable or embedded flash storage. It belongs to the broader hierarchy of USB interface controllers, peripheral controllers, interface ICs, and semiconductors. Unlike a general-purpose USB-to-serial bridge, the USB2241 family is designed around the requirements of flash media cards, including card detection, data transfer, and media-format support. The principal advantages of the USB2241-AEZG-05 include USB 2.0 operation, a 36-QFN-EP surface-mount package, a 3 V to 3.6 V operating supply range, and a parallel host interface. The 6 mm by 6 mm package allows compact implementation in portable readers, embedded media systems, and industrial data-acquisition equipment. The -05 ordering suffix identifies this exact manufacturer configuration and should be retained when sourcing a replacement. Microchip positions the USB2241 as an ultra-fast controller for multi-format flash media. Its internal role is to translate host-side USB transactions into the appropriate command and data protocol for supported flash media. Compared with placing storage-control logic directly in a system controller, the dedicated USB2241 can simplify the host-side software model while providing a defined interface between USB connectivity and flash-card storage. Typical applications include USB card readers, portable media accessories, embedded storage systems, industrial data loggers, and equipment that transfers files through removable flash media. It is particularly relevant to compact designs where a dedicated USB-to-flash-media interface is preferable to using a general-purpose host controller for card protocol management. Designers should preserve the recommended supply-decoupling network, route USB differential pairs as a controlled impedance pair, and verify exposed-pad thermal performance in the final PCB stack-up. The 3 V to 3.6 V supply range also requires attention to source voltage tolerance, startup sequencing, and the voltage required by the attached flash media. This page organizes the controller's electrical and package information, compares related USB2241-family devices, and provides practical application and design guidance. It also distinguishes exact ordering variants from broader USB2241 references so engineers can evaluate PCB reuse without overlooking media-support or qualification differences.

RFQ যোগাযোগ
USB2241-AEZG-06 - USB 2.0 Flash Media Controller | Microchip
USB2241-AEZG-06

USB2241-AEZG-06 - USB 2.0 Flash Media Controller | Microchip

Microchip Technology USB2241-AEZG-06 is a USB 2.0 multi-format flash media controller designed to provide an ultra-fast interface between a USB host controller and flash memory cards. The device supports SD, MMC, and MS flash media, operates from a 3.3 V supply, and is specified for a 0°C to 70°C temperature range. It is packaged in a 36-pin VQFN measuring 6 mm by 6 mm. A USB flash media controller is an interface IC that translates commands and data between a USB host and removable flash storage. It belongs to the USB interface controller class, within the broader category of interface ICs and semiconductors. This controller is intended for equipment that reads or manages flash cards through a USB 2.0 host connection, allowing one system architecture to communicate with several widely used flash-media formats. The USB2241-AEZG-06 is identified as an ultra-fast USB 2.0 controller with multi-format media support. Its principal documented characteristics include USB 2.0 operation, a 3.3 V operating supply, compatibility with SD, MMC, and MS flash media, and a compact 36-VQFN package. The 6 mm by 6 mm package supports compact product designs while exposing the media and USB interface connections required by a multi-format card-reader system. System integration centers on connecting the USB2241-AEZG-06 between the host-side USB interface and the physical flash-media interface. USB 2.0 provides the host-facing link, while the controller manages the command translation needed to communicate with supported flash cards. This separation allows a host controller to handle USB transactions while the dedicated media controller handles card-format compatibility and media access. Typical applications include USB card readers, multifunction printers, portable media devices, digital cameras, portable gaming accessories, and embedded equipment that accepts flash media. In these systems, the controller reduces the need for separate card-format handling in the main processor and centralizes access to SD, MMC, and MS devices behind one USB interface IC. Designers should pay close attention to the 3.3 V supply requirement, the 0°C to 70°C commercial temperature range, and the 36-VQFN land pattern. The exposed pad, power distribution, and high-speed signal layout must follow the manufacturer's package and reference-layout guidance to maintain reliable signal integrity and thermal performance. This product page combines the manufacturer interface description, package and environmental characteristics, qualified drop-in comparison, commercial sourcing guidance, and practical integration notes. It is intended to help engineers identify whether the USB2241-AEZG-06 matches a USB 2.0 multi-format flash-media design before beginning PCB implementation.

RFQ যোগাযোগ
USB2241I-AEZG-06 USB 2.0 Flash Media Controller | Microchip
USB2241I-AEZG-06

USB2241I-AEZG-06 USB 2.0 Flash Media Controller | Microchip

The Microchip Technology USB2241I-AEZG-06 is a USB 2.0 multi-format flash media controller designed to provide a high-speed interface between a USB host controller and SD, MMC, and Memory Stick flash media. It supports USB full-speed and high-speed operation up to 35 Mbps and operates from a 3.3 V supply. The controller is packaged in a 36-lead VFQFN package with a 6 x 6 mm body and an exposed thermal pad for compact surface-mount designs. A USB flash media controller is an interface IC that bridges removable flash-card formats with a USB host. It manages command translation, media access, card detection, and data transfer between the host and SD, MMC, or Memory Stick devices. In the product hierarchy, the USB2241 belongs to the USB interface controller family and ultimately falls within the broader semiconductor and embedded-interface categories. Key characteristics include USB 2.0 full-speed and high-speed support, a maximum stated transfer rate of 35 Mbps, and a 3.3 V operating supply. The multi-format architecture reduces the need for separate host-side controllers when a product must accept more than one removable-media standard. Its surface-mount VFQFN-36 construction also supports compact card readers, portable storage products, kiosks, and embedded systems requiring integrated media-card connectivity. The controller is positioned as a peripheral media-interface solution rather than a USB host controller. Its internal task is to translate host USB transfers into operations accepted by the supported flash-media devices while handling the associated media-control functions. System designers still need to implement the correct electrical connections, clocking, decoupling, firmware support, and card-socket signal routing described by Microchip Technology in the USB2241 documentation. Typical uses include USB card readers, industrial data-collection terminals, portable diagnostic equipment, digital photo and music accessories, and embedded appliances that accept SD, MMC, or Memory Stick media. The same physical 36-QFN format is especially useful when an existing design needs to standardize its footprint across multiple flash-card interfaces while preserving a compact board layout. Design considerations center on following the manufacturer’s pin-description table, assigning the exposed pad to the intended thermal and electrical plane, and placing required power and clock components close to the device. Signal-routing decisions should preserve USB impedance continuity and isolate sensitive analog or radio-frequency sections from switching and connector-related noise. Firmware and host-driver support must also match the selected card formats and operating system. This page combines the manufacturer’s functional description with distributor package information, application-focused engineering guidance, and a same-footprint comparison against identified USB2241-family options. It also highlights where a board revision or firmware review remains necessary before selecting a replacement, helping engineers separate package similarity from confirmed application-level compatibility.

RFQ যোগাযোগ
USB2244-AEZG-05 - USB 2.0 Flash Card Controller | Microchip
USB2244-AEZG-05

USB2244-AEZG-05 - USB 2.0 Flash Card Controller | Microchip

The Microchip Technology USB2244-AEZG-05 is a USB 2.0 flash media card controller with an I2C interface, supplied in a 36-QFN package measuring 6 x 6 mm. It operates from a 3 V to 3.6 V supply, consumes a listed 135 mA supply current, and provides a high-speed interface between a USB host controller and flash media cards. A USB flash media card controller is an integrated semiconductor that manages communication between a USB host and removable or embedded flash storage. In the product hierarchy, this controller combines USB connectivity, flash media translation, data buffering, and host-facing control functions. The USB2244 is positioned as a Hi-Speed USB 2.0 controller for SD, MMC, and Memory Stick flash media formats. The controller is designed for embedded systems that need to expose flash media through a standard USB 2.0 connection. Microchip describes the USB2244 as an ultra-fast interface between a USB host controller and flash media cards. Its USB224x family supports average sustained transfer rates exceeding 35 MB/s when both the media and host can sustain the required transfer rate, making the controller relevant to media readers, portable storage, and data-acquisition equipment. The USB2244 and USB2244/44i families include provisions for reading and writing secure media formats. This capability makes controller-level media-format support relevant to storage appliances, embedded readers, and systems that must present conventional flash-card media through USB to a host computer. Actual transfer performance depends on the selected card, host controller, device driver, and signal-integrity implementation. The USB2244-AEZG-05 uses a 36-QFN package to integrate the controller within compact embedded hardware. Its specified 3 V to 3.6 V operating range is compatible with conventional low-voltage digital systems. Because the QFN package has no large exposed leads, PCB layout must follow the manufacturer land-pattern and pin-assignment guidance rather than a generic connector footprint. For a new design, confirm the exact package drawing, pin names, signal levels, clock requirements, external component recommendations, and supported media formats against the Microchip USB224x data sheet. Validate the complete USB electrical path and card-detection behavior with the intended host, operating system, card supplier, and mechanical enclosure before production release.

RFQ যোগাযোগ
USB2244-AEZG-06 USB 2.0 Card Controller | Microchip
USB2244-AEZG-06

USB2244-AEZG-06 USB 2.0 Card Controller | Microchip

The Microchip Technology USB2244-AEZG-06 is a USB 2.0 flash media card controller designed to provide a high-speed interface between a USB host and SD, MMC, and MS flash media. It is specified in a 36-QFN package measuring 6 x 6 mm and includes an I2C interface for host or system configuration. The controller is part of the USB224x family, a family designed for ultra-fast USB 2.0 multi-format card-reader and embedded storage applications. A USB flash media card controller is an interface IC that bridges a computer or embedded USB host with removable or flash-based memory media. It handles the physical and logical connection between the USB host controller and one or more supported card formats, allowing a system to expose storage through a standard USB interface. The USB2244 family supports secure digital, MultiMediaCard, and Memory Stick media, making it useful for card readers, portable storage, industrial data collection, and equipment with legacy media-card requirements. The USB2244-AEZG-06 supports USB 2.0 high-speed operation and an operating supply range identified as 3 V to 3.6 V. Microchip describes the USB224x family as capable of average sustained transfer rates exceeding 35 MB/s when both the media and USB host support those rates. Actual transfer performance depends on the selected card, host controller, command queue depth, media implementation, and system software. The integrated controller architecture reduces the external component count required for a multi-format USB card interface. Its I2C interface supports configuration or control interaction in systems that need more than a basic pass-through path between the USB host and storage media. The 36-QFN package is intended for compact PCB layouts, although high-speed signal integrity, power distribution, and thermal performance still require careful implementation. Typical uses include USB card readers, industrial handheld terminals, portable data-acquisition equipment, test systems, and embedded media-access products. A design using this controller should verify card-format support, insertion-detection behavior, firmware compatibility, and the electrical requirements for every supported media type against the manufacturer datasheet. For PCB implementation, place the USB and media interface connections according to the reference layout and keep the controller's power and ground connections close to their package pins. Decoupling, trace matching, controlled-impedance routing, and protection strategy are especially important because this part operates as a high-speed interface between external media and a USB host. This product page combines the manufacturer product information, package identification, media-format capabilities, interface details, documented transfer-rate context, and practical implementation guidance to support component selection, schematic review, PCB planning, and drop-in replacement evaluation.

RFQ যোগাযোগ
USB2244I-AEZG-06 - USB 2.0 SD/MMC/MS/xD Flash Media Controller | Microchip
USB2244I-AEZG-06

USB2244I-AEZG-06 - USB 2.0 SD/MMC/MS/xD Flash Media Controller | Microchip

The Microchip Technology USB2244I-AEZG-06 is an ultra-fast USB 2.0 Hi-Speed flash media card controller that provides a high-speed interface between a USB host controller and removable flash media, supplied in a 36-lead QFN (6x6 mm) surface-mount package with an exposed thermal pad. A flash media card controller, also called a card reader controller or storage bridge IC, sits between the USB host port and the physical media connector. It translates USB transactions into SD, MMC, Memory Stick and xD card commands, manages card detection, insertion and removal, and handles card identification and enumeration. Within the interface IC hierarchy, this device belongs to the storage and removable-media controller class of USB interface semiconductors. The controller targets the full-speed and high-speed USB 2.0 host interface and supports SD, MultiMediaCard, Memory Stick and xD-Picture Card families in a single chip. Operating supply voltage is 3.3 V, matching the 3 V class of USB host controllers and embedded set-top, industrial and consumer media-reader designs. Because the entire card-interface logic, card-detection and USB PHY functions are integrated, systems can be built with one IC plus a media connector instead of a discrete card reader. According to the Microchip USB2244 product documentation, the part is designed for ultra-high performance operation and average data transfer rates suited to moving large media files quickly. The exposed pad under the 36-QFN package provides a low-impedance thermal path to the PCB copper, which is essential because the controller dissipates power continuously during high-throughput transfers across all four media formats simultaneously supported by the internal engines. Typical applications include USB 2.0 card readers and dongles, multi-format portable media players, digital camera accessories, industrial data loggers that accept SD or MMC cards, set-top box and smart-TV media slots, and USB-to-flash bridge products for embedded systems that need field-updatable storage. Design consideration: the card connector layout, card-detect and write-protect signals, plus USB D+/D- routing, must follow the impedance and length rules given in the manufacturer datasheet. Decouple the 3.3 V supply close to the exposed pad with a high-frequency ceramic plus bulk capacitance, and keep the analog card-interface traces away from the USB differential pair to limit crosstalk into the media data path. This page adds engineering value beyond the manufacturer datasheet by consolidating package and ordering information, verified distributor listings, drop-in alternatives from the same USB2244 family, and practical layout notes for designers integrating multi-format flash media into USB 2.0 products.

RFQ যোগাযোগ
USB2250-NU-05 - USB 2.0 Flash Media Controller | Microchip
USB2250-NU-05

USB2250-NU-05 - USB 2.0 Flash Media Controller | Microchip

The Microchip Technology USB2250-NU-05 is a USB 2.0 flash media card controller with a 3.0 V to 3.6 V supply range, a 128-pin VTQFP package measuring 14 mm by 14 mm, and supply-current specifications reported between 135 mA and 165 mA by available product listings. It is designed to provide a high-speed serial interface between a USB host and flash memory cards. A USB flash media controller is an interface IC within the broader semiconductor and interface-controller hierarchy. It manages the electrical and protocol-level connection between a USB host controller and removable or embedded flash media. The USB2250 belongs to Microchip's USB225x family, which is positioned around USB 2.0 compliance, interoperability, and rapid transfer of data to widely used flash memory cards. Key features include USB 2.0 interface operation, FlashMedia controller functionality, a serial interface, and operation from 3.0 V to 3.6 V. The supplied data identifies the controller as an ultra-fast USB 2.0 flash media solution. Its 128-pin VTQFP package provides a large number of mixed-signal, power, ground, and interface connections, allowing support for multiple media interfaces and compact card-reader or embedded-storage designs. The USB2250-NU-05 combines a USB host-side interface with flash-media-facing controller functions. Available manufacturer information describes the family as providing comprehensive USB 2.0 compliance and interoperability, while distributor records characterize USB2250-NU-05 as a USB 2.0 controller in a 128-VTQFP package. Exact clock, transfer-rate, card-interface, and electrical-limit details were not included in the supplied search records and should therefore be confirmed against the Microchip datasheet before design release. Typical uses include USB card readers, portable storage systems, digital cameras, personal digital devices, embedded data loggers, and industrial equipment that transfers files through a USB 2.0 host. The device is most appropriate where a dedicated flash-media controller is preferable to implementing the media interface and card-management logic directly in a host controller. Designers should allocate the complete 128-pin footprint, including exposed-pad and thermal requirements where applicable, and should use the manufacturer reference schematic for exact pin assignments. Because the supplied records use differing maximum supply-current values, 135 mA and 165 mA, power-budget and worst-case startup decisions should use 165 mA until the device-specific datasheet condition is confirmed. This product page consolidates verified manufacturer and distributor information, package details, commercial availability data, application guidance, and drop-in alternatives into a design-focused reference. It also distinguishes documented values from missing technical parameters rather than estimating them, helping engineers identify what must be checked in the authoritative datasheet.

RFQ যোগাযোগ
USB2250-NU-06 - USB 2.0 Flash Controller | Microchip
USB2250-NU-06

USB2250-NU-06 - USB 2.0 Flash Controller | Microchip

The Microchip Technology USB2250-NU-06 is a USB 2.0 flash media card controller operating at 35 Mbit/s with a 3.3 V supply, housed in a 128-pin VTQFP package measuring 14 mm by 14 mm. It provides the interface between a USB host and compatible flash media cards, combining USB device connectivity with dedicated media-card control logic. A USB flash media card controller is an interface IC within the broader USB controller and storage-interface ecosystem. Its role is to translate commands and data between a USB host and removable flash media while coordinating protocol handling, card interfacing, and host connectivity. The USB2250 belongs to Microchip’s USB225x family, which targets high-speed USB 2.0 flash-media applications requiring a dedicated controller rather than a general-purpose host or peripheral controller. The verified product data identifies the USB2250-NU-06 as a USB 2.0 interface controller with a maximum host data-transfer rate of 35 Mbit/s. It operates from a 3.3 V supply and supports the Ultra-Fast USB 2.0 flash-media controller role. Its 128-pin VTQFP package provides the interface and support circuitry required for a multi-contact memory-card implementation, although individual pin functions were not included in the supplied excerpts. The 35 Mbit/s interface rate corresponds to full-speed USB 2.0 operation and is substantially faster than a low-speed USB connection. This makes the controller relevant to products that need a dedicated bridge between a USB host and flash media, including card readers, portable storage equipment, industrial data-collection equipment, and embedded storage systems. The controlled operating supply of 3.3 V also supports integration into modern embedded systems that operate from a 3.3 V power domain. The package is the principal implementation constraint for engineers evaluating this controller. A 128-pin VTQFP with a 14 mm by 14 mm body and 0.40 mm pitch requires a multilayer PCB and fine-pitch assembly capability. The larger lead count and exposed routing demands are considerably more substantial than those of a compact USB interface controller, but they provide the connections needed for a full flash-media controller implementation. When designing a PCB around the USB2250-NU-06, verify the exact pin configuration, recommended power and decoupling networks, clock requirements, media-card interface details, and layout guidance in the manufacturer datasheet before release. Because the supplied web excerpts do not provide a verified pin table, stack-up recommendation, impedance value, or thermal-resistance figure, those details should not be inferred from the package alone. This product page consolidates verified distributor and manufacturer information, distinguishes same-family alternatives, and adds practical selection and PCB-design guidance. It also highlights where engineering teams must consult the complete USB2250/USB2251 datasheet for pin-level, electrical, and layout requirements that cannot be substantiated by the supplied search records.

RFQ যোগাযোগ
USB2250I-NU-06 - USB 2.0 Flash Media Controller | Microchip
USB2250I-NU-06

USB2250I-NU-06 - USB 2.0 Flash Media Controller | Microchip

The Microchip Technology USB2250I-NU-06 is an industrial-grade USB 2.0 flash media controller for reading and writing more than 24 flash-media formats, with sustained transfer rates exceeding 35 MB/s when the media and host support that performance. The device is housed in a 128-pin VTQFP package measuring 14 x 14 mm and interfaces between a USB host and removable flash-media storage. A USB flash media controller is an interface IC that translates USB mass-storage commands into the electrical signaling required by CompactFlash, SmartMedia, xD-Picture Card, Memory Stick, Secure Digital, and MultiMediaCard devices. Within the product hierarchy, this controller belongs to the USB interface controller family, the larger interface IC category, and ultimately the integrated-circuit and semiconductor classifications used for embedded data-transfer systems. The controller supports more than 24 popular flash-media formats and is designed for applications using single or combination media sockets. Multiple simultaneous card insertions can be handled, while the number of logical units and their assignment to card types remain flexible. These capabilities make the device useful for industrial media readers, portable diagnostic equipment, data acquisition systems, and specialized card-access appliances. The USB 2.0 Hi-Speed interface supports an average sustained transfer rate exceeding 35 MB/s when both the attached media and host controller can sustain the required throughput. Actual performance depends on the media device, electrical implementation, host software, and workload. The integrated design reduces the need for a separate USB-to-flash bridge while providing a common interface across numerous legacy and removable flash-memory formats. Typical implementations include CompactFlash readers, multi-slot memory-card stations, industrial data loggers, test and measurement equipment, and embedded systems that must exchange files through removable media. The industrial-grade positioning is relevant where equipment must tolerate extended operating conditions beyond typical consumer environments, although design engineers should verify the exact temperature limits and qualification requirements against the manufacturer datasheet. PCB implementation requires careful attention to USB signal routing, flash-media interface layout, power integrity, and exposed-pad thermal management. Place the USB transceiver path away from switching nodes and analog-sensitive circuitry, route differential USB traces as a matched pair, and provide the decoupling network specified by the manufacturer near the appropriate supply pins. Use the package land pattern and pin-description tables in the manufacturer datasheet when assigning tracks and assembling the board. This product page combines manufacturer-family information, verified distributor identification, package details, application analysis, design guidance, and a parameter-by-parameter comparison of supported same-package family alternatives. It is designed to help engineers confirm controller fit, package compatibility, media coverage, thermal planning, and sourcing requirements before committing a USB flash-media interface to a PCB layout.

RFQ যোগাযোগ
USB2251-NU-06 - USB 2.0 Flash Media Controller | Microchip
USB2251-NU-06

USB2251-NU-06 - USB 2.0 Flash Media Controller | Microchip

Microchip Technology USB2251-NU-06 is a Hi-Speed USB 2.0 flash media card controller with a 24 MHz maximum clock frequency and a maximum data transfer rate of 35 Mbps, housed in a 128-terminal VTQFP package measuring 14 x 14 mm. It is designed to provide an interface between a USB host controller and flash media cards. A USB flash media card controller is a specialized interface IC that translates host-side USB traffic into commands understood by flash-memory media. Within the broader hierarchy, it is a USB interface controller, an interface IC, an integrated circuit, and a semiconductor designed for removable or embedded flash-storage applications. The USB2251 family supports Hi-Speed USB 2.0 operation and broad media-card interoperability for devices requiring direct access to flash storage. The key features include USB 2.0 compatibility, a 24 MHz maximum operating clock, a 35 Mbps maximum data-transfer rate, I2C bus compatibility, and a 128-terminal surface-mount package. The 14 x 14 mm VTQFP format provides 128 electrical connections, allowing the controller to expose multiple media interfaces, control signals, data buses, and power-management connections. A tray package is listed by the distributor data for this ordering code. Technically, the USB2251 belongs to Microchip's USB225x controller family, which is designed around a high-speed USB 2.0 host interface and flash-media-card control functions. Its 35 Mbps maximum transfer rate is materially faster than the 12 Mbps ceiling associated with Full-Speed USB operation, making it suitable for flash-media devices where transfer latency affects data synchronization, file copying, and application startup. The controller operates from a 3.3 V supply according to the distributor product listing. Typical uses include USB flash-memory readers, portable storage devices, embedded storage systems, digital media equipment, and host systems that need a dedicated USB-to-flash bridge. In a card-reader implementation, the controller handles USB enumeration and transaction exchange with the host while transferring data to compatible flash media through the device's card-interface signals. The I2C-compatible interface can support configuration or management functions where the host or system controller requires them. Designers should verify the complete 128-pin signal map, configuration options, voltage levels, clock requirements, and media-support matrix in the manufacturer datasheet before PCB release. Because no verified 128-terminal pin table was supplied, this page does not infer pin names or numbering. USB routing also requires careful controlled-impedance layout, short high-speed traces, solid reference planes, and compliant power distribution to avoid signal-integrity and EMC issues. This page consolidates the verified manufacturer description, distributor package data, operating highlights, ordering information, and traceable web sources. It also distinguishes verified drop-in-family candidates from functional equivalents that would require a different footprint, helping engineers compare sourcing options without mistaking a merely similar USB storage controller for a pin-compatible replacement.

RFQ যোগাযোগ
USB2251I-NU-06 - USB 2.0 Flash Media Controller | Microchip
USB2251I-NU-06

USB2251I-NU-06 - USB 2.0 Flash Media Controller | Microchip

The Microchip Technology USB2251I-NU-06 is a specialized USB 2.0 flash media card controller designed to interface supported flash-memory formats with a USB host controller. It supports Hi-Speed USB 2.0 operation and is packaged as a 128-pin VTQFP measuring 14 x 14 mm. The controller is intended for embedded USB mass-storage equipment requiring a dedicated interface to flash media rather than a general-purpose storage controller. A flash media controller is an interface IC within the broader hierarchy of USB interface controllers, storage controllers, and semiconductor components. It manages the electrical and protocol-level connection between a USB host and a removable or embedded flash-memory card. The USB2251 family targets readers and storage appliances using SmartMedia/xD-Picture Card, Memory Stick, MultiMediaCard, Secure Digital, Compact Flash, and related flash-media formats. Key features include USB 2.0 Hi-Speed operation, support for multiple legacy flash-card standards, and a compact 128-pin VTQFP package. The 14 x 14 mm package provides a high pin count for card detection, power-control, data-bus, command, and configuration connections. This makes USB2251I-NU-06 suitable for multifunction readers, portable storage products, industrial data terminals, and embedded systems that must bridge a USB host to physically distinct flash-card interfaces. Technically, the device belongs to the USB225x family of flash media card controllers. Its architecture separates USB host connectivity from the media-card interface, allowing firmware to identify inserted media and expose supported cards through a USB mass-storage function. The product is identified as the industrial-temperature version of USB2251, although exact electrical limits should be confirmed in the manufacturer datasheet before final qualification. Typical applications include USB flash-card readers, multifunction office devices, portable media players, data-acquisition terminals, and industrial control panels. In each case, the controller reduces the need for a host processor to implement card-specific electrical protocols. System designers must still provide correct card connectors, signal conditioning, storage media support, firmware, and validated host-driver behavior. A primary design consideration is the relatively complex pin and power-management architecture. Route high-speed USB signals as a controlled impedance path, place decoupling close to the supply pins, and follow the pin-description and configuration tables in the manufacturer datasheet. Media-format support must also be verified against the target product requirements because legacy card interfaces are not interchangeable at the connector or firmware level. This product page combines the exact Microchip ordering information, verified package and interface details, supported flash-media functions, drop-in family options, and practical integration guidance. It is intended to help engineers determine whether the USB2251I-NU-06 matches their USB 2.0 card-reader architecture before schematic capture and PCB layout begin.

RFQ যোগাযোগ
USB2380-AB25NI - PCI to USB 2.0 Bridge | Broadcom
USB2380-AB25NI

USB2380-AB25NI - PCI to USB 2.0 Bridge | Broadcom

The Broadcom USB2380-AB25NI is a PCI-to-USB interface controller for bridging a conventional PCI host connection to USB 2.0 peripherals. It supports PCI Express Generation 1.0 operation, USB 2.0 high-speed connectivity, and a compact 88-QFN package measuring 10 mm by 10 mm. The device is primarily associated with the Broadcom Limited and legacy Avago product naming used by distributors. A PCI-to-USB bridge is an interface controller that allows a PCI-based system to communicate with USB devices through a dedicated controller rather than relying exclusively on a newer USB host interface. Within the broader semiconductor hierarchy, the USB2380-AB25NI is an interface IC that sits between PCI system buses and USB peripherals, with USB 2.0 providing the downstream device interface. The principal documented features are USB 2.0 high-speed support, PCI Express Generation 1.0 compatibility, and a surface-mount 88-QFN package. The 10 mm by 10 mm package provides a substantial exposed thermal and mounting footprint compared with smaller lead-frame packages. This is useful when a board has sufficient area for the controller and its associated routing, power, and interface networks. The controller is intended for embedded and legacy platform designs where a conventional PCI host must connect to USB 2.0 peripherals. Its role differs from a general-purpose USB hub because the device bridges a PCI interface to the USB bus rather than expanding an existing USB host port. It also differs from newer USB controllers that may provide more extensive power management, protection, or firmware support. Typical design contexts include PCI-compatible embedded systems, industrial equipment, test systems, and legacy peripheral platforms. A design must account for PCI routing, USB signal integrity, reference-clock requirements, decoupling, and the thermal characteristics of the 88-QFN package. The USB 2.0 bus also requires correct connector and device-capability planning for high-speed or full-speed peripherals. Because this controller targets an established and mature interface combination, verify that the system architecture, firmware, operating-system support, and peripheral devices are compatible before committing to the design. Check the manufacturer pin-description table and reference design for exact signal assignments, exposed-pad connection, and recommended component values. This page consolidates the verified interface, package, pricing, and sourcing details into an engineering-focused reference. It also highlights the limited drop-in replacement landscape and separates confirmed USB2380-AB25NI information from parameters that require confirmation from the Broadcom datasheet before layout or production release.

RFQ যোগাযোগ
USB2412-DZK - 2-Port USB 2.0 Hub Controller | Microchip
USB2412-DZK

USB2412-DZK - 2-Port USB 2.0 Hub Controller | Microchip

The Microchip USB2412-DZK is a low-power, two-port USB 2.0 hub controller IC using a single Transaction Translator architecture, with a 3 V to 3.6 V supply range and support for low-speed, full-speed, and high-speed downstream devices in a 28-QFN package. It is designed for embedded USB hub applications requiring two downstream ports and USB 2.0 Hi-Speed operation. A USB hub controller is an interface IC that manages traffic between one upstream USB host connection and multiple downstream USB ports. The USB2412 belongs to the USB interface-controller hierarchy, where USB 2.0 connectivity, transaction translation, port management, and embedded system integration combine into a dedicated hub solution. Its single Transaction Translator, or STT, architecture is intended to reduce implementation complexity in compact USB hub designs. The verified product information identifies two downstream ports, USB 2.0 operation, low-power operation, and support for low-speed, full-speed, and high-speed downstream devices when the hub operates at high speed. The controller is available in a 28-QFN package, while distributor records identify the package as 28-VFQFN with an exposed pad. The USB interface supports system integration with embedded USB host, peripheral, docking, and industrial equipment designs. The 3 V to 3.6 V operating supply range places the device in a low-voltage digital interface class. USB data integrity depends on correct PCB routing, adequate power distribution, compliant connector implementation, and proper decoupling. The exposed-pad package requires attention to thermal and layout practices, even though the verified snippets do not provide a complete electrical limit table or detailed power-consumption values. Typical applications include two-port embedded USB hubs, self-powered USB equipment, industrial control systems, test and measurement fixtures, docking equipment, and compact host systems that need USB device expansion. The two-port architecture is useful when a system must connect peripherals without adding multiple independent host controllers. When selecting a replacement, verify the complete pinout, package dimensions, exposed-pad connection, USB signal routing, clock requirements, and power sequencing against the original design. The USB2412-DZK-TR is a tape-and-reel ordering variant, while other listed controllers or transceivers may provide different functions and must not be treated as drop-in substitutes without manufacturer verification. This page consolidates the verified manufacturer description, distributor package data, official datasheet link, application guidance, and cross-reference findings to support engineering selection. It distinguishes confirmed USB2412 attributes from parameters that require the manufacturer datasheet or an authorized design review.

RFQ যোগাযোগ
USB2412-DZK-TR - 2-Port USB 2.0 Hub Controller | Microchip (Tape & Reel)
USB2412-DZK-TR

USB2412-DZK-TR - 2-Port USB 2.0 Hub Controller | Microchip (Tape & Reel)

The Microchip USB2412-DZK-TR is a low-power, two-port USB 2.0 hub controller IC using a single Transaction Translator architecture, with a 3 V to 3.6 V supply range and support for low-speed, full-speed, and high-speed downstream devices in a 28-QFN package. It is designed for embedded USB hub applications requiring two downstream ports and USB 2.0 Hi-Speed operation. A USB hub controller is an interface IC that manages traffic between one upstream USB host connection and multiple downstream USB ports. The USB2412 belongs to the USB interface-controller hierarchy, where USB 2.0 connectivity, transaction translation, port management, and embedded system integration combine into a dedicated hub solution. Its single Transaction Translator, or STT, architecture is intended to reduce implementation complexity in compact USB hub designs. The verified product information identifies two downstream ports, USB 2.0 operation, low-power operation, and support for low-speed, full-speed, and high-speed downstream devices when the hub operates at high speed. The controller is available in a 28-QFN package, while distributor records identify the package as 28-VFQFN with an exposed pad. The USB interface supports system integration with embedded USB host, peripheral, docking, and industrial equipment designs. The 3 V to 3.6 V operating supply range places the device in a low-voltage digital interface class. USB data integrity depends on correct PCB routing, adequate power distribution, compliant connector implementation, and proper decoupling. The exposed-pad package requires attention to thermal and layout practices, even though the verified snippets do not provide a complete electrical limit table or detailed power-consumption values. Typical applications include two-port embedded USB hubs, self-powered USB equipment, industrial control systems, test and measurement fixtures, docking equipment, and compact host systems that need USB device expansion. The two-port architecture is useful when a system must connect peripherals without adding multiple independent host controllers. When selecting a replacement, verify the complete pinout, package dimensions, exposed-pad connection, USB signal routing, clock requirements, and power sequencing against the original design. The USB2412-DZK-TR-TR is a tape-and-reel ordering variant, while other listed controllers or transceivers may provide different functions and must not be treated as drop-in substitutes without manufacturer verification. This page consolidates the verified manufacturer description, distributor package data, official datasheet link, application guidance, and cross-reference findings to support engineering selection. It distinguishes confirmed USB2412 attributes from parameters that require the manufacturer datasheet or an authorized design review.

RFQ যোগাযোগ
USB2422-CP - Low-Power 2-Port USB 2.0 Hub Controller | Microchip Technology
USB2422-CP

USB2422-CP - Low-Power 2-Port USB 2.0 Hub Controller | Microchip Technology

The Microchip Technology USB2422-CP is a low-power, single-transaction-translator USB 2.0 hub controller with two downstream ports, packaged in a 24-QFN (4x4 mm) package. It supports an upstream Hi-Speed and Full-Speed hub connection or a Full-Speed-only configuration, while downstream devices can operate at Low-Speed, Full-Speed, or Hi-Speed when configured as a Hi-Speed hub. The controller is designed for embedded USB expansion systems requiring compact bus routing and USB 2.0 compatibility. Its two-port architecture integrates downstream-port USB connectivity into one controller rather than requiring separate hub devices. A USB hub controller is an interface IC within the broader USB interface-controller and semiconductor hierarchy. In an embedded system, the upstream port connects the hub to a host controller, while each downstream port connects external peripherals such as storage, keyboards, communications modules, or service interfaces. USB2422-CP acts as the transaction translator and hub-management element between those connections, helping the host system organize USB traffic across two ports. Its support for Full-Speed and Hi-Speed operation makes it relevant to legacy USB 2.0 embedded designs rather than modern USB 3.x or USB4 systems. The principal verified feature set includes a 2-port USB 2.0 hub configuration, single transaction translator operation, upstream Hi-Speed and Full-Speed attachment capability, and downstream Low-Speed, Full-Speed, and Hi-Speed support. Microchip describes the device as low power, which is valuable in embedded equipment where USB expansion must not dominate the system power budget. The 24-QFN package provides a compact surface-mount footprint, but its exposed thermal and electrical requirements must be handled according to the manufacturer datasheet. The controller is positioned between a USB host and downstream USB peripherals. When configured as a Hi-Speed hub, the upstream link and compatible downstream links can use USB 2.0 Hi-Speed operation; when used as a Full-Speed-only hub, the design avoids requiring Hi-Speed operation. Device attachment, removal, enumeration, and power-management behavior must be evaluated against the USB host software and the electrical requirements of the connected peripherals. The verified web data does not provide current unit pricing, stock status, lead time, detailed pin names, or all electrical timing and current limits, so those values are not inferred here. Typical applications include embedded instrumentation, industrial control panels, compact USB expansion boards, peripheral consolidation, and USB connectivity in systems that already use a USB 2.0 host controller. A hub may be useful when a processor exposes one host port but the enclosure requires two external connections. The design should verify connector protection, power switching, cable length, chassis grounding, and host compatibility. The manufacturer datasheet is the authoritative source for pin assignments, electrical limits, configuration registers, and implementation details. Use the USB2422-CP when the existing PCB is designed around its 24-QFN footprint and the application needs a compact two-port USB 2.0 hub controller. Confirm package pin compatibility, operating conditions, and USB host requirements before treating any substitute as a drop-in replacement. This page combines verified manufacturer descriptions, distributor package information, datasheet references, application context, and procurement guidance. It distinguishes documented facts from missing parameters and avoids inventing prices, pin assignments, electrical limits, or replacement parts.

RFQ যোগাযোগ
USB2422-CP-TR - Low-Power 2-Port USB 2.0 Hub Controller | Microchip Technology (Tape & Reel)
USB2422-CP-TR

USB2422-CP-TR - Low-Power 2-Port USB 2.0 Hub Controller | Microchip Technology (Tape & Reel)

The Microchip Technology USB2422-CP-TR is a low-power, single-transaction-translator USB 2.0 hub controller with two downstream ports, packaged in a 24-QFN (4x4 mm) package. It supports an upstream Hi-Speed and Full-Speed hub connection or a Full-Speed-only configuration, while downstream devices can operate at Low-Speed, Full-Speed, or Hi-Speed when configured as a Hi-Speed hub. The controller is designed for embedded USB expansion systems requiring compact bus routing and USB 2.0 compatibility. Its two-port architecture integrates downstream-port USB connectivity into one controller rather than requiring separate hub devices. A USB hub controller is an interface IC within the broader USB interface-controller and semiconductor hierarchy. In an embedded system, the upstream port connects the hub to a host controller, while each downstream port connects external peripherals such as storage, keyboards, communications modules, or service interfaces. USB2422-CP-TR acts as the transaction translator and hub-management element between those connections, helping the host system organize USB traffic across two ports. Its support for Full-Speed and Hi-Speed operation makes it relevant to legacy USB 2.0 embedded designs rather than modern USB 3.x or USB4 systems. The principal verified feature set includes a 2-port USB 2.0 hub configuration, single transaction translator operation, upstream Hi-Speed and Full-Speed attachment capability, and downstream Low-Speed, Full-Speed, and Hi-Speed support. Microchip describes the device as low power, which is valuable in embedded equipment where USB expansion must not dominate the system power budget. The 24-QFN package provides a compact surface-mount footprint, but its exposed thermal and electrical requirements must be handled according to the manufacturer datasheet. The controller is positioned between a USB host and downstream USB peripherals. When configured as a Hi-Speed hub, the upstream link and compatible downstream links can use USB 2.0 Hi-Speed operation; when used as a Full-Speed-only hub, the design avoids requiring Hi-Speed operation. Device attachment, removal, enumeration, and power-management behavior must be evaluated against the USB host software and the electrical requirements of the connected peripherals. The verified web data does not provide current unit pricing, stock status, lead time, detailed pin names, or all electrical timing and current limits, so those values are not inferred here. Typical applications include embedded instrumentation, industrial control panels, compact USB expansion boards, peripheral consolidation, and USB connectivity in systems that already use a USB 2.0 host controller. A hub may be useful when a processor exposes one host port but the enclosure requires two external connections. The design should verify connector protection, power switching, cable length, chassis grounding, and host compatibility. The manufacturer datasheet is the authoritative source for pin assignments, electrical limits, configuration registers, and implementation details. Use the USB2422-CP-TR when the existing PCB is designed around its 24-QFN footprint and the application needs a compact two-port USB 2.0 hub controller. Confirm package pin compatibility, operating conditions, and USB host requirements before treating any substitute as a drop-in replacement. This page combines verified manufacturer descriptions, distributor package information, datasheet references, application context, and procurement guidance. It distinguishes documented facts from missing parameters and avoids inventing prices, pin assignments, electrical limits, or replacement parts.

RFQ যোগাযোগ
USB2422-I/MJ - 2-Port USB 2.0 Hub Controller | Microchip
USB2422-I/MJ

USB2422-I/MJ - 2-Port USB 2.0 Hub Controller | Microchip

The Microchip Technology USB2422-I/MJ is a low-power, single-transaction-translator USB 2.0 hub controller with two downstream ports, 3.3 V operation, and a 24-QFN 4x4 mm package. It supports Low-Speed, Full-Speed, and Hi-Speed downstream devices when configured as a Hi-Speed hub, while the upstream connection can operate as a Hi-Speed and Full-Speed hub or as a Full-Speed-only hub. A USB hub controller is an interface IC that manages one upstream USB connection and multiple downstream USB ports. Within the broader hierarchy of USB interface controllers, the USB2422 combines port routing, power-switch control, overcurrent protection, internal voltage regulation, and USB signal conditioning in one compact device for embedded systems. The part includes BC1.1 protocol support, downstream port power-switch control, overcurrent protection, an internal regulator, and ESD protection. Required USB port resistors are integrated, including D+ and D- series-termination resistors and the specified pull-down or pull-up resistors. Internal pull-ups are also provided for downstream overcurrent-sense inputs, reducing external component count. Its single-translation-translator architecture serves embedded USB applications in which low power, compactness, and upstream-device integration matter more than independent simultaneous translation on every downstream port. The device can therefore support compact host ports in equipment that otherwise lacks native USB hub routing. Typical uses include industrial control panels, medical equipment, printers, embedded test systems, set-top boxes, and other USB 2.0 equipment requiring two downstream connections. Applications should account for the hub's single-translator architecture and verify downstream-device compatibility before final system release. PCB implementation should preserve the manufacturer's recommended USB trace geometry, place decoupling and support components near their associated pins, and route differential D+ and D- paths as a matched pair. USB signal integrity depends on controlled impedance, minimized stubs, and uninterrupted return-path continuity across the connector, controller, and protection circuitry.

RFQ যোগাযোগ