উপশ্রেণী

পণ্য (44,000+)

USB2641I-HZH-02 - 2-Port USB 2.0 Hub Controller | Microchip
USB2641I-HZH-02

USB2641I-HZH-02 - 2-Port USB 2.0 Hub Controller | Microchip

The Microchip Technology USB2641I-HZH-02 is an industrial-temperature USB 2.0 flash media controller and two-port Hi-Speed USB hub controller in a 48-QFN 7 x 7 mm package. It combines an interface between a USB host and flash media cards with a versatile, power-efficient two-port USB 2.0 hub, supporting average sustained transfer rates exceeding 35 MB/s. A USB hub controller is an interface IC that expands one host USB connection into multiple downstream ports while providing power management and device enumeration. A flash media controller adds read and write access to flash-memory cards, allowing one controller to combine USB hub expansion with removable-storage connectivity. Together, these functions place the USB2641I-HZH-02 within the interface IC, USB interface controller, and USB expansion-controller hierarchy. The controller supports USB 2.0 Hi-Speed operation and provides two downstream hub ports alongside its flash-media interface. Its industrial-temperature designation supports use in environments where broader temperature coverage than a standard commercial-temperature controller is required. The integrated design reduces the need for separate hub and flash-reader components, making it useful in multifunction peripherals, docking systems, industrial equipment, and embedded computing platforms. According to the manufacturer data sheet for the USB2640i and USB2641i family, the USB2641I-HZH-02 can sustain average transfer rates exceeding 35 MB/s. Its integrated architecture is intended to provide high-performance flash-media operation while the hub function handles multiple USB devices. This combination makes board-level design more compact than a discrete implementation using separate media-reader and hub controllers. Typical applications include two-port USB docking stations, industrial data-acquisition equipment, multifunction printers, embedded systems requiring flash-card access, and USB expansion panels. The controller is especially relevant when a design needs both removable-storage connectivity and multiple USB ports without allocating separate controller devices or expanding the host system’s internal USB resources. PCB implementation requires careful routing of USB 2.0 differential pairs, correct impedance control, suitable power-plane distribution, and compliance with the layout guidance in the manufacturer data sheet. Designers should also confirm the exact pin assignments, exposed-pad connection, crystal or clock requirements, and media-support configuration in the pin-description and reference-design sections before releasing a production layout. This page combines the manufacturer’s USB2641i family information with package details, application guidance, a parameter comparison, and practical selection considerations. It is intended to help engineers determine whether the USB2641I-HZH-02 fits a compact USB 2.0 hub-plus-card-reader design and to identify the closest documented drop-in choices without overlooking firmware, temperature-grade, or footprint constraints.

RFQ যোগাযোগ
USB2642-I/ML - USB 2.0 Hub Card Reader | Microchip
USB2642-I/ML

USB2642-I/ML - USB 2.0 Hub Card Reader | Microchip

The Microchip Technology USB2642-I/ML is a USB 2.0 high-speed hub and flash media card controller combination IC with two downstream USB ports and an SD/MMC interface, supplied in a 48-QFN 7 mm × 7 mm package. It operates from a 3.3 V supply and supports low-speed, full-speed, and high-speed USB devices. The integrated design combines USB expansion and flash media reader/writer functionality in one controller. A USB hub controller is an interface device that expands one host USB connection into multiple downstream ports while managing USB traffic and device connections. A flash media card controller provides read/write access to supported SD or MMC flash media. In the broader electronics hierarchy, the USB2642 belongs to interface ICs, USB interface controllers, USB 2.0 hub controllers, and combined flash media controllers. The principal verified features are USB 2.0 compliance, high-speed operation, two downstream USB ports, and one SD/MMC flash media card interface. Its 48-QFN package supports compact surface-mount designs, while the exposed-pad package construction provides a defined thermal and electrical land pattern. The device is intended for systems that need local USB port expansion together with removable flash-media connectivity. Typical uses include USB docking stations, compact desktop computers, consumer electronics, card-reader equipment, printers, storage accessories, and embedded USB peripherals. Because the controller consolidates hub and media-card functions, it can reduce the number of separate interface devices required in a compact system. Designers must still account for USB signal routing, connector protection, supply decoupling, card-detect wiring, and the exposed thermal pad when laying out the PCB. For USB2642-I/ML designs, confirm the exact pin functions, electrical limits, reference circuitry, and supported media details against the Microchip datasheet before release. USB high-speed pairs require controlled impedance and careful return-path continuity; card-interface traces should be kept away from noisy switching nodes. The part is not a general-purpose power semiconductor, so a Safe Operating Area chart is not applicable. This page combines the verified manufacturer and distributor information with package, application, procurement, and replacement guidance. It is intended to help engineers identify whether the USB2642-I/ML matches a USB hub plus flash-media architecture before committing the 48-QFN footprint to a PCB layout.

RFQ যোগাযোগ
USB2642/ML - USB 2.0 Hub and Card Controller | Microchip
USB2642/ML

USB2642/ML - USB 2.0 Hub and Card Controller | Microchip

The Microchip Technology USB2642/ML is a USB 2.0 hi-speed hub and flash media card controller combo with 2 downstream USB ports and an SD/MMC interface, supplied in a 48-QFN package. It operates from a 3.3 V supply according to the verified distributor data. The device combines USB expansion and flash media reader/writer integration in one controller. A USB hub controller is an interface semiconductor that manages one upstream USB connection and distributes traffic to downstream ports. A flash media card controller adds access to removable memory through SD or MMC interfaces. The USB2642/ML therefore belongs to the USB interface IC hierarchy: USB controller, interface IC, semiconductor, and embedded connectivity device. The principal features are USB 2.0 high-speed operation, two downstream USB 2.0 ports, and an SD/MMC flash media interface. The verified manufacturer description also identifies the device as a cost-effective, energy-efficient, fully integrated solution. Its integrated design can reduce the need for separate hub and media-reader interface circuitry while supporting both USB expansion and card access. The USB2642/ML is suitable for compact USB hubs, card readers, multifunction peripherals, docking systems, and embedded USB storage products. According to the manufacturer product page, it provides a USB expansion and flash media reader/writer combination in a single chip. The datasheet search results additionally describe sustained flash-media transfer rates exceeding 35 MB/s, although the exact system throughput depends on the attached device and implementation. Designs must follow the manufacturer datasheet for decoupling, USB signal routing, card-interface layout, and exposed-pad thermal management. USB differential pairs should be routed with controlled impedance and minimized discontinuities. The SD/MMC interface and USB connectors should be placed to reduce signal coupling, while the power network should provide low-impedance return paths for both digital and high-current USB loads. This page consolidates the verified manufacturer and distributor information, procurement context, package details, and application guidance for USB2642/ML. It also distinguishes the available same-family Microchip variants without presenting unverified cross-brand replacements as drop-in equivalents.

RFQ যোগাযোগ
USB2642T-I/ML - USB 2.0 Hub and Card Controller | Microchip
USB2642T-I/ML

USB2642T-I/ML - USB 2.0 Hub and Card Controller | Microchip

The Microchip Technology USB2642T-I/ML is a USB 2.0 high-speed hub and flash media card controller combination with two downstream USB 2.0 ports, a 3.3 V interface, and sustained flash-media transfer rates exceeding 35 MB/s. It is housed in a 48-pin 7 mm × 7 mm QFN package with an exposed pad and is designated for an industrial temperature range of -40°C to +85°C. A USB hub controller is an interface IC that expands one upstream USB connection into multiple downstream ports while managing USB traffic and attached-device power. A flash media card controller adds read/write access to removable flash storage through supported media interfaces. Combined, the USB2642 belongs to the broader USB interface controller hierarchy, where USB bus interfacing, port expansion, and storage-device connectivity are consolidated into one controller. The principal feature is integration: two USB 2.0 downstream ports and flash-media reader/writer functionality share one device rather than requiring separate hub and card-reader controllers. The manufacturer datasheet identifies USB 2.0 high-speed operation, support for eMMC, and sustained flash transfer rates exceeding 35 MB/s. The available part also lists I2C, SPI, and USB interfaces, providing configuration and connectivity options for embedded host systems. The USB2642 architecture is intended to place a USB host interface, downstream-port control, flash-media access, and supporting digital interfaces in one surface-mount IC. Its 48-QFN package provides a compact 7 mm × 7 mm footprint, but the exposed thermal pad requires careful PCB layout and adequate copper for heat dissipation. The -I ordering designation identifies the industrial -40°C to +85°C operating range shown in the comparison data. Typical uses include multifunction printers, set-top boxes, digital media systems, industrial HMI panels, and compact embedded USB systems that need both peripheral expansion and flash-card access. In such systems, the controller can connect storage media to an existing USB host while presenting two downstream USB ports for peripherals, reducing component count relative to separate controllers. The primary design consideration is power and signal integrity. Layout must preserve USB differential-pair routing, provide the decoupling and exposed-pad thermal structure required by the datasheet, and account for downstream-port current requirements. Designers should also verify card-format support, host-driver compatibility, firmware configuration, and connector protection before committing the USB2642T-I/ML to a new design. This page consolidates verified distributor pricing, package and interface details, manufacturer documentation, and a practical assessment of the limited directly verifiable drop-in alternatives. It also distinguishes confirmed USB2642 family variants from broader functional equivalents that cannot be represented as pin-compatible replacements without additional board-level verification.

RFQ যোগাযোগ
USB2642T/ML USB 2.0 Hub and Flash Controller | Microchip
USB2642T/ML

USB2642T/ML USB 2.0 Hub and Flash Controller | Microchip

The Microchip Technology USB2642T/ML is a USB 2.0 high-speed hub and flash media card controller combo with USB, I2C, and SPI interfaces, supplied in a 48-QFN 7x7 mm package. It integrates USB expansion with flash-media reader and writer functionality, supporting low-speed, full-speed, and high-speed USB 2.0 devices. The device is identified by distributor listings as a specialized controller-interface IC with a 48-QFN package and exposed pad. A USB hub controller is an interface IC that expands one host USB port into multiple downstream connections while managing USB traffic and device attachment. The flash media card controller portion adds access to supported flash media formats, creating a compact bridge between a USB host, USB peripherals, and removable storage. This combination is useful in docking stations, embedded systems, printers, set-top equipment, and compact industrial controllers where board space and peripheral integration are important. The verified device data identifies USB 2.0 low-, full-, and high-speed operation, I2C and SPI interfaces, USB hub functionality, and flash-media controller functionality. The 48-QFN package provides a high pin count for integrated USB and storage connectivity, while the exposed pad supports thermal management on a suitably designed PCB. The exact supported media formats, electrical limits, operating-temperature range, and complete pin assignment are not provided in the supplied search data and must be confirmed from the manufacturer datasheet. Typical implementation places the USB2642T/ML between a USB host controller and downstream USB ports, with flash-media interfaces serving external storage devices. Firmware must configure the hub and media-access functions, while the host system supplies reference, clock, power, and I2C or SPI control. Designers should follow Microchip's USB routing, impedance, decoupling, and exposed-pad guidance rather than treating the QFN footprint as a generic package. The principal design consideration is signal integrity. USB high-speed edges require controlled impedance, short routing, continuous return paths, minimized stubs, and careful separation from noisy power and digital clocks. The exposed thermal pad must be connected to the intended ground or thermal plane according to the datasheet land pattern, and adequate decoupling must be placed close to the supply pins. This page combines verified manufacturer and distributor descriptions, practical USB design considerations, and explicit data gaps for parameters not present in the supplied source material.

RFQ যোগাযোগ
USB2660-JZX - Dual USB 2.0 Controller | Microchip
USB2660-JZX

USB2660-JZX - Dual USB 2.0 Controller | Microchip

The Microchip Technology USB2660-JZX is a dual USB 2.0 flash media controller with an integrated Hi-Speed USB hub, supplied in a 64-pin QFN package measuring 9 x 9 mm. It operates from a 3.3 V supply, and the verified commercial specification identifies a 0 to 70 C operating-temperature range for this ordering code. The device combines USB interface, card-reader, and protocol-converter functions for systems that require access to multiple-format flash media. A flash media controller is an interface IC that translates commands between a host USB connection and removable flash-memory formats. Within the broader electronics hierarchy, the USB2660 belongs to the USB interface-controller family, which sits below interface ICs, integrated circuits, and semiconductors. Its integrated Hi-Speed hub function can simplify system architecture where one upstream USB link must serve multiple downstream connections, while the dual media-controller capability consolidates card-reader support into one device. The verified feature set includes USB 2.0 connectivity, Hi-Speed USB hub operation, dual flash-media-controller support, and an integrated solution for popular multi-format flash cards. The device also includes internal FETs that can be used for card-power switching, according to the manufacturer data sheet. That integration is valuable in desktop and notebook platforms because it reduces the number of separate interface and power-control components required around removable storage. The USB2660/USB2660i family is described as a compliant USB 2.0 combination of Hi-Speed hub, card reader, and protocol converter. The controller is intended to manage host-to-media command exchange while supporting card-power requirements. Exact transfer-rate tables, supported-card matrix, clock requirements, memory capacity limits, and electrical timing limits must be confirmed in the manufacturer data sheet before a new board is released. Typical applications include USB storage readers, desktop and notebook computer platforms, removable flash-media docks, card-reader subsystems, and compact consumer systems requiring an upstream hub with downstream media access. The 9 x 9 mm QFN-64 package supports compact designs, but its exposed thermal and electrical considerations require careful layout according to the manufacturer's land pattern and recommended decoupling guidance. Designers should verify USB signal routing, impedance continuity, crystal or clock implementation, media-card interfaces, and power-distribution requirements directly against the USB2660 data sheet. Particular attention should be given to the internal card-power FET configuration, because the manufacturer documentation identifies separate power-control options and system behavior depends on the selected configuration. This page consolidates verified manufacturer and distributor information, package details, commercial availability, comparison parameters, and practical design cautions for USB2660-JZX. It also distinguishes documented facts from parameters that require engineering confirmation, reducing the risk of treating incomplete distributor summaries as full production specifications.

RFQ যোগাযোগ
USB2660I-JZX-03 - USB 2.0 Hub & Multi-Format Flash Controller | Microchip
USB2660I-JZX-03

USB2660I-JZX-03 - USB 2.0 Hub & Multi-Format Flash Controller | Microchip

The Microchip Technology USB2660I-JZX-03 is a USB 2.0 Hi-Speed hub controller combined with a multi-format flash media reader/writer and dual Secure Digital (SD) interfaces, integrated in a single chip. Per the Microchip USB2660/USB2660i datasheet (DS00001931B), this combo device delivers up to 480 Mbps Hi-Speed USB performance, two downstream USB 2.0 ports, and multi-format flash card support including SD, MMC, Memory Stick, and xD-Picture Card. The device is housed in a 64-pin QFN (JZX) 9x9 mm package with exposed thermal pad, designed for surface mount desktop and notebook PC applications. The industrial temperature grade (-40C to +85C) makes the USB2660I variant suitable for non-consumer embedded use cases where the commercial-grade USB2660 is insufficient. A USB 2.0 Hi-Speed hub controller is a category of USB peripheral that aggregates multiple downstream ports and card-reader functions behind a single upstream port, while a flash media controller is a class of storage interface IC that bridges a host processor to removable flash memory cards using standardized protocols such as SD, MMC, and MSPro. The USB2660I sits at the intersection of these two product types, forming part of the broader USB interface IC hierarchy: USB peripheral controller -> USB hub controller -> combo hub + media reader -> Microchip USB264x/2660 family. This combination reduces PCB area, BOM count, and design complexity for system integrators that would otherwise need a separate hub chip and card-reader chip. Key features of the USB2660I-JZX-03 include 2 downstream USB 2.0 Hi-Speed ports, an internal transaction translator for mixed-speed USB environments, multi-format flash card support with dual SD interfaces, integrated card power FETs, on-board 24 MHz crystal driver, and USB-IF certified hub silicon. The chip is USB 2.0 compliant and supports Suspend and low-power modes per the USB specification. Programmable through an external I2C EEPROM, the device enables custom vendor/product IDs, string descriptors, and manufacturer-specific behavior. Internally the USB2660I uses Microchip's proven UTMI+ compliant physical layer and a hardened Hi-Speed USB 2.0 hub topology that delivers industry-leading data throughput in mixed-speed environments where some downstream devices run at Full-Speed (12 Mbps) and others at Hi-Speed (480 Mbps). The integrated media controller supports USB Mass Storage class and SDIO bridging, enabling SDIO peripherals to enumerate over USB with custom firmware. Typical applications include desktop and notebook PCs, multi-function printers with card reader slots, docking stations, set-top boxes, and industrial panel PCs that expose SD card slots and multiple USB ports to end users. Designers use the USB2660I-JZX-03 to consolidate USB expansion and media reading onto a single 9x9 mm QFN. When designing with the USB2660I-JZX-03, allocate at least four PCB layers for clean USB signal routing, route the differential DP/DM pair as a 90-ohm impedance-matched pair, and provide a local 0.1 uF decoupling cap adjacent to every power pin. The exposed thermal pad must be soldered to a contiguous ground pour to meet USB-IF Hub Certification thermal-rise limits.

RFQ যোগাযোগ
USB2SERA10CFK - USB 2.0 to UART Bridge | NXP | 5x5 QFN
USB2SERA10CFK

USB2SERA10CFK - USB 2.0 to UART Bridge | NXP | 5x5 QFN

NXP Semiconductors USB2SERA10CFK is a single-chip USB-to-UART bridge controller that adds a USB 2.0 full-speed serial interface to an embedded system. It operates at 12 Mbps, supports a TTL RS232 or RS485 UART, and provides programmable baud rates from 300 bps to 1,152,000 bps. The device is packaged in a 24-pin HVQFN package measuring 5 x 5 mm. A USB-to-UART bridge is an interface-controller IC that translates commands and data between a USB host and a conventional asynchronous serial peripheral. Within the product hierarchy, the USB2SERA10CFK belongs to the USB bridge, USB interface controller, interface IC, and semiconductor categories. Its purpose is to reduce external component count while giving an embedded product access to USB connectivity for configuration, data transfer, firmware access, or field-service connections. The controller supports eight-bit UART data, one or two stop bits, and odd, even, or no parity. Flow-control choices include hardware flow control and Xon-Xoff software flow control. A RESUME output requests a remote wake-up, while a SUSPEND output indicates the bridge's suspended operating state. These features allow the serial side to be adapted to host timing, transceiver requirements, and legacy peripheral behavior without implementing a complete USB protocol stack in the host application. USB2SERA10CFK is suitable for industrial control equipment, test and measurement instruments, data-acquisition equipment, configuration ports, and service interfaces. It is particularly useful where an existing TTL RS232 or RS485 design must gain USB without using a larger external bridge module. System designers should account for the electrical interface between the UART and RS232 or RS485 transceivers; the bridge itself operates at the TTL UART level. Layout quality directly affects USB signal integrity because full-speed USB carries differential data on a compact, high-speed-capable PCB. Place the USB input-capacitance protection and required bypass components near their associated pins, provide a continuous ground reference, route D+ and D+ as a short matched pair, and avoid placing test pads or unrelated routing beneath the differential pair. The manufacturer's pin-description table should be used directly when assigning all 24 package terminals and the exposed thermal pad. This product page consolidates the interface capabilities, package information, application guidance, and engineering constraints of the USB2SERA10CFK. It also distinguishes documented USB and UART functions from details that require confirmation from the manufacturer datasheet or a schematic review before production release.

RFQ যোগাযোগ
USB2SERA11CFK USB-to-UART Bridge | NXP | 24-HVQFN
USB2SERA11CFK

USB2SERA11CFK USB-to-UART Bridge | NXP | 24-HVQFN

NXP Semiconductors USB2SERA11CFK is a USB-to-serial bridge integrated circuit implementing a USB 2.0 device interface to a UART interface. The device is specified for 3V or 5V operation and is packaged in a 24-pin HVQFN package measuring 5 mm by 5 mm, with an exposed pad and no-lead terminals. It is intended for industrial-temperature equipment that requires a compact bridge between a USB host connection and a legacy serial interface. A USB-to-UART bridge is an interface IC that converts USB traffic into a conventional UART data stream. It belongs to the broader USB interface-controller hierarchy, where USB controller and transceiver functions are combined with a serial peripheral interface. This bridge category eliminates the need for a discrete USB controller, transceiver, and UART interface when only one USB-to-serial connection is required. The USB2SER device is compliant with the USB 2.0 specification and carries USB-IF Test-ID 40001386. Its stated 3V or 5V operation supports both conventional logic levels used in industrial embedded systems. The compact 24-HVQFN footprint reduces board area compared with larger leaded packages, while the exposed thermal pad supports heat transfer into the PCB copper area. The USB2SERA11CFK is identified as an industrial-grade component and uses a square, no-lead package with 24 terminals. Its principal engineering role is protocol bridging rather than high-speed data conversion. It is therefore most suitable where an external microcontroller or system processor needs an inexpensive, standardized USB-to-UART path for configuration, control, logging, or legacy equipment integration. Typical applications include industrial control and test equipment, USB-to-serial service adapters, embedded-system commissioning tools, and peripheral controllers with legacy UART connectors. The bridge can simplify enclosure design because a single USB connector and UART interface replace a larger multi-chip USB implementation. Firmware must still implement the required USB enumeration and UART behavior for the target operating system. PCB design should provide clean USB routing, adequate bypass capacitance at the device supply pins, and a properly connected exposed pad. Follow the manufacturer pin-description and layout guidance when assigning tracks, because the exact pin names, clock requirements, and external component values are not reproduced on this page. Confirm signal levels and supported operating conditions against the manufacturer datasheet before releasing a production design. This page combines the identified USB 2.0 compliance, 3V or 5V operation, industrial temperature grade, 24-HVQFN package information, and application guidance with sourcing and replacement validation notes. It also highlights the distinction between a verified same-footprint substitute and a merely similar USB interface controller, helping engineers avoid unnecessary PCB redesigns.

RFQ যোগাযোগ
USB3320C-EZK - Hi-Speed USB 2.0 ULPI Transceiver | Microchip
USB3320C-EZK

USB3320C-EZK - Hi-Speed USB 2.0 ULPI Transceiver | Microchip

The Microchip USB3320C-EZK is a highly integrated full-featured Hi-Speed USB 2.0 transceiver built on the proven ULPI (UTMI+ Low Pin Interface) standard, housed in a 32-pin QFN (5x5 mm) package. It supports 480 Mbps High-Speed and 12 Mbps Full-Speed USB signaling, operates from a single 3.3 V supply with on-chip 1.8 V LDO regulator, and provides up to +30 V VBUS ESD protection on the USB connector side. A USB 2.0 transceiver (also called a PHY) is the physical-layer analog block that sits between a digital SoC's ULPI/UTMI link and the differential DP/DM lines of a USB connector. It handles HS chirp, packet detection, serializer/deserializer, and clock recovery, while leaving link-layer protocol to the host controller. Within the system hierarchy, the USB3320C-EZK is a peripheral controller companion IC: SoC (application processor) -> ULPI link -> USB3320 PHY -> DP/DM -> USB connector. This split architecture lets designers pair an inexpensive PHY with any SoC that exposes ULPI pins (NXP i.MX, ST STM32, Xilinx Zynq, TI Sitara). Key electrical characteristics include 480 Mbps Hi-Speed data rate, internal 1.8 V regulator eliminating external LDO, integrated 45 ohm HS termination resistors (no external Rs needed), 8-bit single-data-rate ULPI interface with 60 MHz reference clock, and integrated USB charger-detection hardware. The device is USB 2.0 specification compliant, USB Battery Charging v1.2 capable, and OTG-ready via the ID pin. The architecture uses a 60 MHz reference clock input (REFCLK) generated by the SoC, an internal PLL multiplies to 480 MHz for HS operations. A digital state machine handles UTMI/ULPI command interpretation, while the analog block performs line termination, current-mode driver bias, and disconnect detection. The chip supports both host and peripheral roles. Typical applications include USB 2.0 device/host ports on single-board computers, OTG ports on industrial tablets, automotive infotainment USB interfaces, medical device USB ports, and 5G/LTE modem modules with USB 2.0 diagnostic channels. Designers favor the USB3320C-EZK over UTMI-only PHYs because ULPI slashes pin count to 12 versus UTMI's 30+. When designing with this device, maintain 90-ohm differential impedance on DP/DM traces to the connector, place decoupling capacitors on VDD33/VDD18/VBAT as close as possible to the IC, and ensure the REFCLK signal has less than 50 ps jitter to pass USB compliance. Do not omit the ID pin pull-up for OTG or charger-detection operation.

RFQ যোগাযোগ
USB3803 - 3-Port USB 2.0 Hi-Speed Hub Controller | Microchip
USB3803

USB3803 - 3-Port USB 2.0 Hi-Speed Hub Controller | Microchip

The Microchip USB3803 is a three-port USB 2.0 Hi-Speed hub controller optimized for portable, battery-powered embedded systems, integrating BC 1.1 charger detection, flexible internal power regulators, and a 25-ball WLCSP package. It connects to an upstream port as a Full-Speed or Hi-Speed hub and supports Low, Full, and Hi-Speed downstream devices on all enabled ports. The device targets tablets, smartphones, and other mobile platforms where small footprint, low standby current, and minimal BOM are critical design constraints. A USB hub controller is a dedicated interface IC that aggregates multiple downstream USB ports behind a single upstream port, handling transaction translation, port power control, and suspend/resume signaling. In the broader USB-IF taxonomy, hubs sit between hosts (root hubs inside PC chipsets) and peripherals, implementing Chapter 11 of the USB 2.0 specification. The USB3803 belongs to the "embedded hub" sub-category, optimized for integration into battery-powered devices rather than stand-alone retail hubs. Key features include 480 Mbps Hi-Speed upstream support, integrated USB-IF Battery Charging 1.1 detection on the upstream port, integrated 5V-to-3.3V and 1.8V regulators, a serial slave (I2C) interface for status/configuration, and ultra-low standby and bypass current modes. The WLCSP-25 package measures only 2.0 x 2.0 mm, enabling placement on space-constrained mobile mainboards. Microchip's Bypass mode (USB3803C variants) reduces quiescent current to single-digit microamperes when the host is off, directly extending battery life. Architecturally, the USB3803 integrates a Hi-Speed UTMI/ULPI-less PHY, a serial interface engine (SIE), per-port transaction translators, and the charger-detection analog block. The on-chip regulators remove the need for external LDO components when powered from a single 5V VBAT rail, further shrinking BOM count. The I2C serial slave interface exposes charger-status and configuration registers, allowing the application processor to query attach type, port power status, and override default settings. Typical applications include tablets and 2-in-1 laptops requiring one USB-A expansion port, smartphone accessories with OTG-to-host bridging, portable medical devices, and embedded infotainment head units. The charger-detection block also enables the device to act as a charger-sensing front-end, reporting Standard Downstream Port (SDP), Charging Downstream Port (CDP), or Dedicated Charging Port (DCP) classification back to the application processor over I2C. When designing with this part, allocate adequate PCB area under the WLCSP for the exposed die pad and route the 90-ohm differential USB pairs with controlled impedance. Microchip's USBCheck online design review service is available free of charge to qualified customers using the USB3803 in production designs. This page synthesizes distributor stock, application-grade alternatives, and practical layout notes not found in the manufacturer datasheet, giving embedded engineers a single decision-ready reference.

RFQ যোগাযোগ
USB4604-1080HN - 4-Port USB 2.0 Hub Controller | Microchip
USB4604-1080HN

USB4604-1080HN - 4-Port USB 2.0 Hub Controller | Microchip

Microchip Technology USB4604-1080HN is a USB 2.0 Hi-Speed four-port hub controller with four downstream ports, 1.8 V and 3.3 V operation, and a 48-SQFN 7 x 7 mm package. It is an OEM-configurable MTT hub controller designed for embedded USB systems that require multiple USB connectivity points. A USB hub controller is an interface IC that manages communication between an upstream USB host and multiple downstream devices. It belongs to the USB interface controller hierarchy, where the USB 2.0 controller translates USB traffic while providing device attachment, enumeration, and port-management functions. The USB4604 therefore supports the practical role of expanding one host connection into a managed four-port USB interface. The controller supports Low-Speed, Full-Speed, and Hi-Speed USB operation as described in the manufacturer documentation. Its four downstream ports can operate as Full-Speed ports, or the device can attach to an upstream Full-Speed port as a Full-Speed hub or to a Hi-Speed upstream port as a Full-Speed or Hi-Speed hub. Operation at 1.8 V and 3.3 V supports integration into embedded equipment using common low-voltage power rails. The USB4604 uses an MTT architecture and is intended for OEM configuration of embedded USB applications. The manufacturer identifies compliance with the USB 2.0 Specification, the USB 2.0 Link Power Management Addendum, and the High-Speed Inter-Chip electrical specification revision 1.0. This combination of configurable behavior and standards support makes the controller relevant to OEM designs rather than a general-purpose host adapter. Typical uses include embedded USB hubs, docking systems, industrial equipment, test fixtures, and compact peripheral platforms that need four downstream USB connections. Its small 48-SQFN package also helps limit board area when the design already includes USB connectors, routing space, and required decoupling. A successful implementation must follow the manufacturer datasheet for HSIC routing, power sequencing, crystal or clock requirements, USB data-path layout, and exposed-pad thermal management. USB differential traces should be routed as controlled-impedance pairs with minimal branch stubs and continuous return paths. This product page consolidates the manufacturer specifications, commercial availability, family alternatives, and implementation guidance into one engineering-focused reference. It also distinguishes the exact USB4604-1080HN ordering code from related USB4604 family members so designers can verify package, temperature, and configuration requirements before schematic release.

RFQ যোগাযোগ
USB4604-1080HN-TR - 4-Port USB 2.0 Hub Controller | Microchip (Tape & Reel)
USB4604-1080HN-TR

USB4604-1080HN-TR - 4-Port USB 2.0 Hub Controller | Microchip (Tape & Reel)

Microchip Technology USB4604-1080HN-TR is a USB 2.0 Hi-Speed four-port hub controller with four downstream ports, 1.8 V and 3.3 V operation, and a 48-SQFN 7 x 7 mm package. It is an OEM-configurable MTT hub controller designed for embedded USB systems that require multiple USB connectivity points. A USB hub controller is an interface IC that manages communication between an upstream USB host and multiple downstream devices. It belongs to the USB interface controller hierarchy, where the USB 2.0 controller translates USB traffic while providing device attachment, enumeration, and port-management functions. The USB4604 therefore supports the practical role of expanding one host connection into a managed four-port USB interface. The controller supports Low-Speed, Full-Speed, and Hi-Speed USB operation as described in the manufacturer documentation. Its four downstream ports can operate as Full-Speed ports, or the device can attach to an upstream Full-Speed port as a Full-Speed hub or to a Hi-Speed upstream port as a Full-Speed or Hi-Speed hub. Operation at 1.8 V and 3.3 V supports integration into embedded equipment using common low-voltage power rails. The USB4604 uses an MTT architecture and is intended for OEM configuration of embedded USB applications. The manufacturer identifies compliance with the USB 2.0 Specification, the USB 2.0 Link Power Management Addendum, and the High-Speed Inter-Chip electrical specification revision 1.0. This combination of configurable behavior and standards support makes the controller relevant to OEM designs rather than a general-purpose host adapter. Typical uses include embedded USB hubs, docking systems, industrial equipment, test fixtures, and compact peripheral platforms that need four downstream USB connections. Its small 48-SQFN package also helps limit board area when the design already includes USB connectors, routing space, and required decoupling. A successful implementation must follow the manufacturer datasheet for HSIC routing, power sequencing, crystal or clock requirements, USB data-path layout, and exposed-pad thermal management. USB differential traces should be routed as controlled-impedance pairs with minimal branch stubs and continuous return paths. This product page consolidates the manufacturer specifications, commercial availability, family alternatives, and implementation guidance into one engineering-focused reference. It also distinguishes the exact USB4604-1080HN-TR ordering code from related USB4604 family members so designers can verify package, temperature, and configuration requirements before schematic release.

RFQ যোগাযোগ
USB4604I-1080HN - USB 2.0 4-Port Hub Controller IC
USB4604I-1080HN

USB4604I-1080HN - USB 2.0 4-Port Hub Controller IC

The Microchip Technology USB4604I-1080HN is a configurable USB 2.0 high-speed hub controller with four downstream ports, automatic protocol bridging, and support for 1.8 V and 3.3 V operation in a 48-SQFN package measuring 7 mm by 7 mm. The controller uses a low-power Multi-Transaction Translator architecture and includes power-on reset, wake-up, and built-in clock-generation functions. A USB hub controller is an interface integrated circuit that coordinates traffic between one upstream USB connection and multiple downstream USB ports. Within the device hierarchy, the USB4604I-1080HN is a USB interface controller, a USB 2.0 hub controller, and an embedded USB connectivity component. Its multi-transaction architecture allows USB traffic to be managed efficiently when several peripherals share limited host-controller resources. The primary features include four downstream USB 2.0 ports, automatic protocol bridging between USB 1.1 and USB 2.0 devices, and a low-power operating mode. Additional integrated functions include power-on reset, wake-up support, and a built-in clock generator. These capabilities reduce the external circuitry and firmware coordination normally required for a compact embedded USB hub implementation. The USB4604 family is designed around the USB 2.0 specification, the USB 2.0 Link Power Management Addendum, and the High-Speed Inter-Chip USB electrical specification. Its OEM-configurable architecture supports embedded equipment designs in which downstream-port behavior, power management, and wake-up requirements differ from a general-purpose desktop hub. The combination of 1.8 V and 3.3 V operation accommodates systems using low-voltage digital rails as well as conventional 3.3 V USB equipment. Typical uses include industrial control panels, test and measurement systems, embedded computers, USB docking equipment, printers, storage peripherals, and multi-port charging or data-distribution equipment. The four-port configuration is particularly useful when a host must connect several low- to full-speed accessories while preserving USB 2.0 high-speed operation for compatible downstream devices. The primary design concern is maintaining compliant USB signal and power routing on a dense 48-SQFN footprint. Follow the manufacturer’s pin-description and layout guidance for HSIC connections, supply decoupling, downstream-port routing, and exposed-pad thermal management. Confirm firmware configuration, enumerator behavior, and port-power requirements before releasing a production design. This page organizes the USB4604 family’s verified architecture, package, interface, and feature information into practical guidance for embedded USB hub development. It also distinguishes confirmed drop-in options from functionally related controllers so engineers can avoid assuming that a similar USB hub controller has compatible pins, voltage requirements, or firmware behavior.

RFQ যোগাযোগ
USB4624-1080HN - USB 2.0 Hi-Speed 4-Port Hub Controller | Microchip
USB4624-1080HN

USB4624-1080HN - USB 2.0 Hi-Speed 4-Port Hub Controller | Microchip

The Microchip Technology USB4624-1080HN is a low-power, OEM-configurable USB 2.0 Hi-Speed four-port hub controller built on the MTT (Multi-Transaction Translator) architecture and housed in a 48-SQFN (7x7 mm) package with an exposed thermal pad. It provides four downstream USB ports from a single upstream host connection and is fully compliant with the USB 2.0 specification. The part was originally developed by SMSC and is now supported under the Microchip product line. A USB hub controller is an interface integrated circuit that sits between a host controller and one or more USB peripherals, arbitrating transactions so that multiple low-speed, full-speed and high-speed devices can share a single upstream port. In the device hierarchy it sits below a USB interface IC, below interface ICs, below integrated circuits and below semiconductor components. The MTT approach used here allows multiple transaction translators to schedule split transactions across the four downstream ports, which improves throughput on mixed-speed buses compared with simpler single-translator hubs. Key characteristics of the USB4624-1080HN include a four-downstream-port configuration, full USB 2.0 Hi-Speed operation, OEM configurability of port behaviour, and a low-power design suited to embedded systems. The 48-SQFN (7x7 mm) package with an exposed pad keeps the footprint small while providing a thermal path for the internal transceiver and logic. Because the hub controller integrates port PHYs, port arbitration logic and configuration registers, the designer does not need external hub PHY chips or discrete port muxes. Technically, the device separates upstream signalling from the four downstream port PHYs, with an internal transaction translator that splits and schedules packets. Bus-powered and self-powered hub designs are both supported at the system level through external power-distribution components, while the controller itself handles enumeration, suspend/resume and port over-current reporting. Because the hub is OEM-configurable, firmware can be loaded into the device to match a specific product configuration rather than relying on a generic host-loaded descriptor set. Typical applications include industrial HMI panels, test and measurement front ends with multiple USB peripheral connections, automotive infotainment and seat-controller USB ports, medical carts, set-top box and thin-client USB expansion, docking stations, and embedded gateways that aggregate several USB sensors or storage devices behind one host port. In each of these cases the controller reduces both board area and host-port count while centralising port control. When designing around this part, reserve the exposed pad with a full copper pour and a solid ground plane to keep junction temperature in check, and follow the reference layout in the manufacturer datasheet for the upstream and downstream differential pairs. Keep the high-speed traces short and matched, and provide the decoupling network recommended by Microchip to avoid EMI issues near the connector shells. This page consolidates port architecture, package details, drop-in upgrade paths such as the industrial-temperature USB4624I-1080HN, and practical layout guidance into one engineering reference that goes beyond the summary datasheet tables.

RFQ যোগাযোগ
USB4624-1080HN-TR - USB 2.0 4-Port Hub Controller | Microchip
USB4624-1080HN-TR

USB4624-1080HN-TR - USB 2.0 4-Port Hub Controller | Microchip

The Microchip Technology USB4624-1080HN-TR is a USB 2.0 Hi-Speed four-port hub controller designed for embedded USB applications. It uses a 48-SQFN package measuring 7 x 7 mm and is identified as an OEM-configurable MTT, or Multi-Transaction Translator, hub controller. The device provides four downstream ports and is intended to add USB connectivity where an embedded host processor needs more peripheral expansion than its native USB controller can provide. A USB hub controller is an interface integrated circuit that manages transactions between an upstream USB host and downstream USB devices. It belongs to the USB interface IC hierarchy, which sits between USB connectivity and the larger embedded-control and computer-peripheral markets. The USB4624 is specifically associated with USB 2.0 Hi-Speed operation, low-power embedded implementation, and OEM-configurable hub behavior rather than a general-purpose external desktop hub. The USB4624 supports four downstream ports and is described by Microchip as an MTT architecture. Its documented low-power behavior, shutdown mode, low-power mode, wake-up function, power-on reset, automatic protocol bridging, and built-in clock generator make it useful for compact embedded systems that need managed USB expansion. These functions allow the hub to fit between a host interface and multiple downstream peripherals while supporting controlled power states and initialization. The device is associated with the USB 2.0 Specification, the USB 2.0 Link Power Management Addendum, and the High-Speed Inter-Chip USB Electrical Specification Revision 1.0. HSIC is relevant to compact embedded USB designs because the USB4624 family is also referenced with HSIC in the manufacturer data sheet. The electrical design must therefore account for the appropriate USB 2.0 signaling, routing, and implementation requirements described by Microchip. Typical uses include embedded instrument panels, industrial control equipment, medical monitoring systems, automotive infotainment platforms, set-top boxes, printers, and other products that expose multiple USB connections through an embedded controller. In these applications, the USB4624 can consolidate peripheral connections while giving the OEM control over hub configuration and downstream-port behavior. The 48-SQFN package also supports compact board layouts where connector count is constrained by the enclosure. The main design consideration is that this controller is a specific USB hub implementation rather than a generic USB interface. Board designers should follow the manufacturer data sheet for the complete pin assignment, power architecture, HSIC implementation, clock requirements, configuration method, and package land pattern. The USB4624I-1080HN-TR is a related variant identified in the component listings, but it should not be assumed to be interchangeable without checking its grade, suffix, and configuration details against the original design requirements.

RFQ যোগাযোগ
USB4624I-1080HN - 4-Port USB 2.0 Hub Controller | Microchip
USB4624I-1080HN

USB4624I-1080HN - 4-Port USB 2.0 Hub Controller | Microchip

The Microchip Technology USB4624I-1080HN is a low-power, OEM-configurable USB 2.0 hub controller with four downstream ports, packaged in a 48-terminal 7 x 7 mm SQFN. It uses the USB 2.0 High-Speed Inter-Chip interface to connect an external host or hub to multiple embedded USB devices. The controller can operate as a full-speed hub or as a full-/high-speed hub, making it suitable for compact industrial, medical, communications, and consumer equipment requiring four downstream USB ports. A USB hub controller is an interface integrated circuit that manages transactions between one upstream USB connection and multiple downstream ports. The USB4624 belongs to the USB interface controller hierarchy and uses Multi-Transaction Translator technology to coordinate simultaneous USB traffic. Its USB 2.0 implementation supports full-speed and high-speed operation according to the USB 2.0 Specification and Link Power Management Addendum. This positioning places it above simple four-port USB switches because it also provides device configuration, port management, power-management support, and OEM configurability. The principal features include four downstream USB ports, HSIC host connectivity, shutdown and low-power operating modes, wake-up support, power-on reset, automatic protocol bridging, and a built-in clock generator. The I-version is associated with an industrial operating-temperature range of -40 degrees C to +85 degrees C. Its 48-SQFN package measures 7.00 mm on each side and has a stated seated height of 1.00 mm, supporting compact PCB layouts in embedded platforms. The USB4624 is implemented as a CMOS mixed-signal controller that coordinates protocol translation, port-state control, enumeration support, and power management. HSIC is especially useful when the host processor is physically separated from the hub controller because it reduces external data-line exposure compared with conventional USB wiring. The controller can present a Full-Speed-only hub configuration or a combined Full-/Hi-Speed configuration, allowing OEM designs to match downstream-device requirements without changing the controller architecture. Typical applications include industrial HMIs, USB-to-PCIe embedded systems, medical-device peripherals, set-top and communications equipment, printer interfaces, docking systems, and USB port expanders. A host processor or embedded controller configures the hub through its external control interface, while downstream ports provide protected connectivity for keyboards, storage, cameras, touchscreens, or service interfaces. Designers should follow the manufacturer reference circuit for HSIC routing, crystal or clock requirements, decoupling, port protection, and downstream-power sequencing. HSIC traces should be routed as a short, impedance-controlled pair on the same PCB layer, with the datasheet-specified resistor and capacitor networks placed close to their associated pins. This page combines the manufacturer specifications with package, application, and replacement guidance to support early architecture and board-layout decisions.

RFQ যোগাযোগ
USB4640-HZH-03 - 480Mbps USB 2.0 Hub Controller | Microchip
USB4640-HZH-03

USB4640-HZH-03 - 480Mbps USB 2.0 Hub Controller | Microchip

The Microchip Technology USB4640-HZH-03 is a high-speed USB 2.0 hub and flash media controller with a 480Mbps HSIC upstream interface, supplied in a 48-QFN 7 x 7 mm package. It operates from a 3.3 V supply and combines USB hub control with flash media-card reader functionality. The package uses a lead-free, RoHS-compliant surface-mount design suited to compact embedded systems. A USB hub controller is an interface integrated circuit that manages one upstream host connection and multiple downstream USB ports. The USB4640 combines this USB 2.0 hub function with flash media control in one device, reducing the component count in systems that need both USB peripheral expansion and removable flash storage. Its HSIC host interface provides a two-pin high-speed connection rather than relying on a conventional USB physical-layer host port. Key features include a 480Mbps HSIC 1.0-compliant upstream port, USB 2.0 downstream hub operation, flash media control, and support for I2C, serial, SPI, and USB interfaces. Integrated functions include port power-switch control, port-status monitoring, programmable signal drive, an internal regulator, ESD protection, overcurrent protection, and power-on reset. These functions support a compact implementation where external host logic and USB physical routing remain the primary board-level concerns. The controller combines an HSIC-to-USB bridge with downstream hub-management logic and flash media interface control. Programmable signal drive provides flexibility for board-level USB routing and signal conditioning, while internal power management and port monitoring reduce the amount of external supervision circuitry. ESD and overcurrent protection address two common risks at exposed USB ports: electrostatic discharge from connected accessories and excessive downstream current. Typical applications include multifunction printers, set-top boxes, personal computers, GPS equipment, cellular phones, and embedded systems that expose USB storage to a host. The integrated flash reader is particularly useful where a compact device must accept flash media while also presenting one or more USB ports for peripherals such as keyboards, service interfaces, or removable storage. PCB implementation should follow the USB4640 Hardware Design Checklist, including correct HSIC routing, compliant USB data and power distribution, controlled impedance where required, and the manufacturer-specified input and output capacitance. Firmware revision and configuration must also be checked because the order code includes the internal ROM firmware revision designation. This page combines the manufacturer specifications, package and interface characteristics, application guidance, design checks, and a same-footprint family comparison. It helps engineers identify whether the USB4640-HZH-03 fits a USB 2.0 hub, flash-reader, printer, set-top-box, or HSIC host design while highlighting the points that must be confirmed before substitution.

RFQ যোগাযোগ
USB4640-HZH-03-TR - USB 2.0 Hub Controller | Microchip
USB4640-HZH-03-TR

USB4640-HZH-03-TR - USB 2.0 Hub Controller | Microchip

The Microchip Technology USB4640-HZH-03-TR is a USB 2.0 hub controller with an integrated Flash media card reader, a 480 Mbps Hi-Speed Inter-Chip upstream interface, and a 48-pin VFQFN exposed-pad package measuring 7 x 7 mm. It operates from a 1.8 V interface supply and supports applications including cell phones, GPS equipment, personal computers, printers, and set-top boxes. A USB hub controller is an interface semiconductor that manages one host-facing upstream connection and multiple downstream USB ports. By combining hub-control and Flash-media-reader functions in one device, the USB4640 reduces component count in compact equipment that must connect removable storage while also presenting a full-speed or high-speed USB peripheral interface. Its internal ROM firmware revision is identified by the 03 order-code suffix. The controller provides port power-switch control, port status monitoring, programmable signal drive, an internal regulator, ESD protection, overcurrent protection, and power-on reset. These functions support dependable USB attachment and removal, controlled downstream-port power, and protection for external interfaces. The HSIC upstream connection offers an alternative to a conventional USB host electrical interface for systems designed around high-speed inter-chip signaling. The USB4640 family is designed around USB 2.0 hub and Flash-controller operation. Its 480 Mbps upstream interface and integrated storage-controller functions make it appropriate for embedded systems requiring multiple USB connections and removable-media access. The exposed thermal pad provides a direct heat-dissipation path beneath the device, allowing compact placement on multilayer boards when copper and via-array layout provide adequate thermal conductivity. Typical uses include portable navigation equipment, personal-computer peripherals, printers, set-top boxes, and other embedded USB hosts. In these systems, the device can consolidate downstream USB port management with access to Flash media, reducing connector count and external controller demand. Firmware-specific ordering suffixes should be checked against the host software, supported media devices, and validation requirements. Layout should prioritize short HSIC and USB routing, continuous reference planes, and an exposed-pad via array connected to the appropriate ground or power plane. Place decoupling capacitors close to the supply pins and follow the package-land-pattern guidance in the manufacturer datasheet. Firmware revision compatibility, downstream-port current limits, and media-card support should be verified before production release. This product page combines package, interface, application, protection, and lifecycle information with drop-in comparison guidance. It also highlights practical PCB, thermal, and firmware-selection considerations that help engineers evaluate the USB4640-HZH-03-TR for compact USB hub and Flash-media applications.

RFQ যোগাযোগ
USB4640I-HZH-03 - USB 2.0 HSIC Hub Controller | Microchip
USB4640I-HZH-03

USB4640I-HZH-03 - USB 2.0 HSIC Hub Controller | Microchip

The Microchip Technology USB4640I-HZH-03 is a high-speed USB 2.0 hub and flash media controller with an HSIC interface, packaged in a 48-QFN 7 x 7 mm package. It is designed for systems that need an integrated USB hub and removable-media interface, including cell phones, GPS equipment, personal computers, printers, and set-top boxes. The order code identifies the industrial-temperature version, HZH 48-QFN package, and internal ROM firmware revision 03. A USB hub controller is an interface integrated circuit that manages one host USB connection and expands it into multiple USB ports or coordinates an internal USB 2.0 route. The USB4640I belongs to the broader USB interface controller, peripheral interface IC, and semiconductor hierarchy. Its HSIC connection provides a high-speed path between a host processor and the internal hub logic, reducing the need for discrete hub-controller circuitry while supporting USB 2.0 devices. Key characteristics include high-speed inter-chip USB 2.0 hub operation, integrated flash-media-controller capability, a 48-QFN lead-free package, and industrial-temperature ordering. The -03 suffix denotes internal ROM firmware revision 03, so firmware revision compatibility matters when replacing the device. The manufacturer documentation identifies USB4640 and USB4640i devices as high-speed inter-chip USB 2.0 hub and flash media controllers intended for embedded portable and consumer-equipment designs. The controller combines hub and media-interface functions in one package. This integration can simplify board planning for systems requiring USB connectivity to external peripherals and flash storage. Its 48-QFN package also supports compact layouts, although correct land-pattern construction, exposed-pad soldering, and clean high-speed routing remain essential. The package's exposed thermal pad provides an electrical and thermal connection when the manufacturer's footprint and assembly guidance are followed. Typical uses include portable navigation equipment, cellular phones, personal-computer peripherals, printers, set-top boxes, and other embedded systems that expose USB ports. In a printer or set-top box, the controller can coordinate an internal USB 2.0 route and external device connections. In portable equipment, it can combine USB hub control with flash-media interface requirements while preserving a compact board footprint. The primary design consideration is firmware and PCB compatibility. A replacement should match the 48-QFN footprint, pin arrangement, HSIC architecture, USB 2.0 behavior, temperature grade, and ROM revision. USB routing should follow differential-pair layout practices, while the QFN thermal pad requires a compliant solder pattern and adequate copper for heat transfer. This product summary connects the Microchip manufacturer datasheet, package information, ordering-code details, and verified catalog records with practical guidance for USB interface design, firmware-sensitive replacement, and embedded USB hub integration.

RFQ যোগাযোগ
USB4640I-HZH-03-TR - USB 2.0 HSIC Hub Controller | Microchip (Tape & Reel)
USB4640I-HZH-03-TR

USB4640I-HZH-03-TR - USB 2.0 HSIC Hub Controller | Microchip (Tape & Reel)

The Microchip Technology USB4640I-HZH-03-TR is a high-speed USB 2.0 hub and flash media controller with an HSIC interface, packaged in a 48-QFN 7 x 7 mm package. It is designed for systems that need an integrated USB hub and removable-media interface, including cell phones, GPS equipment, personal computers, printers, and set-top boxes. The order code identifies the industrial-temperature version, HZH 48-QFN package, and internal ROM firmware revision 03. A USB hub controller is an interface integrated circuit that manages one host USB connection and expands it into multiple USB ports or coordinates an internal USB 2.0 route. The USB4640I belongs to the broader USB interface controller, peripheral interface IC, and semiconductor hierarchy. Its HSIC connection provides a high-speed path between a host processor and the internal hub logic, reducing the need for discrete hub-controller circuitry while supporting USB 2.0 devices. Key characteristics include high-speed inter-chip USB 2.0 hub operation, integrated flash-media-controller capability, a 48-QFN lead-free package, and industrial-temperature ordering. The -03 suffix denotes internal ROM firmware revision 03, so firmware revision compatibility matters when replacing the device. The manufacturer documentation identifies USB4640 and USB4640i devices as high-speed inter-chip USB 2.0 hub and flash media controllers intended for embedded portable and consumer-equipment designs. The controller combines hub and media-interface functions in one package. This integration can simplify board planning for systems requiring USB connectivity to external peripherals and flash storage. Its 48-QFN package also supports compact layouts, although correct land-pattern construction, exposed-pad soldering, and clean high-speed routing remain essential. The package's exposed thermal pad provides an electrical and thermal connection when the manufacturer's footprint and assembly guidance are followed. Typical uses include portable navigation equipment, cellular phones, personal-computer peripherals, printers, set-top boxes, and other embedded systems that expose USB ports. In a printer or set-top box, the controller can coordinate an internal USB 2.0 route and external device connections. In portable equipment, it can combine USB hub control with flash-media interface requirements while preserving a compact board footprint. The primary design consideration is firmware and PCB compatibility. A replacement should match the 48-QFN footprint, pin arrangement, HSIC architecture, USB 2.0 behavior, temperature grade, and ROM revision. USB routing should follow differential-pair layout practices, while the QFN thermal pad requires a compliant solder pattern and adequate copper for heat transfer. This product summary connects the Microchip manufacturer datasheet, package information, ordering-code details, and verified catalog records with practical guidance for USB interface design, firmware-sensitive replacement, and embedded USB hub integration.

RFQ যোগাযোগ
USB5742/2G - 2-Port SS/HS USB 3.1 SmartHub Controller | Microchip
USB5742/2G

USB5742/2G - 2-Port SS/HS USB 3.1 SmartHub Controller | Microchip

The Microchip USB5742/2G is a 2-port, low-power SuperSpeed/Hi-Speed USB 3.1 Gen 1 SmartHub hub feature controller with 2 downstream ports, housed in a 56-pin VQFN (7x7 mm) package with exposed thermal pad. It supports USB 3.1 SuperSpeed (5 Gbps), USB 2.0 Hi-Speed (480 Mbps), Full-Speed (12 Mbps), and Low-Speed (1.5 Mbps) downstream traffic, and includes SPI/SMBus configuration interfaces for OEM-flexible firmware customization. A SmartHub is a USB hub controller IC with integrated bridge logic and configurable firmware that adds value features beyond the basic USB hub function defined by the USB-IF. As a category, SmartHub belongs to the USB Interface IC family (a subset of Interface ICs > Integrated Circuits), sitting between root hosts and downstream USB peripherals and providing functions such as port-power switching, per-port enable, programmable GPIO, and flexible upstream port mapping. The USB5742 specifically implements Microchip's fifth-generation USB 2.0 hub feature controller operating in parallel with a SuperSpeed transaction translator, decoupling 5 Gbps SuperSpeed signalling from legacy 480 Mbps traffic and removing the legacy FS/LS signalling bottleneck of older USB-IF transaction translator rules. Key features include full USB Battery Charging v1.2 support including CDP/DCP modes, integrated 5 V VBUS switch drivers with per-port overcurrent protection, USB Link Power Management (LPM) Addendum compliance for U1/U2/U3 low-power states, role-swapping for reversible Type-C wiring, and Microchip's proprietary Multi-Transaction Translator (Multi-TT) for full 480 Mbps bandwidth on all downstream ports simultaneously. The device operates from a single 3.3 V supply, integrates a 5 V to 3.3 V regulator for internal logic, and the -40C to +85C industrial temperature grade supports embedded OEM use. Typical applications include two-port docking stations, embedded USB expansion for industrial PCs, automotive rear-seat USB chargers, USB Type-A wall chargers with smart-charging, and head-unit infotainment connectivity modules. The SPI host interface allows an external MCU to enumerate attached devices, customize charging profiles, and read port events. When designing with the USB5742/2G, ensure the 56-VQFN exposed pad is properly soldered to a contiguous ground plane of at least 1 square inch to meet the 90 mA unconfigured VBUS-current budget. Bypass the 3.3 V rail with 10 uF + 100 nF ceramic capacitors placed within 5 mm of the supply pin, and follow USB-IF HS/SS routing rules (90-ohm differential impedance, intra-pair skew under 15 ps). This page synthesizes distributor pricing, drop-in equivalent SmartHub alternatives, and practical layout guidance not found in the standalone manufacturer datasheet.

RFQ যোগাযোগ
USB5807C-I/KD - 7-Port USB 3.2 Gen 1 SmartHub IC | Microchip
USB5807C-I/KD

USB5807C-I/KD - 7-Port USB 3.2 Gen 1 SmartHub IC | Microchip

The Microchip USB5807C-I/KD is a 7-port, SuperSpeed USB 3.2 Gen 1 SmartHub IC delivering 5 Gbps downstream bandwidth, housed in a 100-pin VQFN EP (12x12 mm) package with industrial temperature grade (-40C to +85C). It supports USB Type-C with integrated USB-C MUX logic, I2C and SPI management interfaces, and Microchip's MultiTRAK, ProTouch, and PortSwap signal-integrity features. A SmartHub is a USB hub that integrates system-level functions typically performed by a separate MCU or processor. In a typical USB topology, a hub sits between the host (root port) and downstream devices, repeating the differential data and managing power and protocol states. The SmartHub class adds vendor configuration, role-swap (USB-C DRP), GPIOs, and optional firmware-driven behaviors that offload the system processor, which is critical in space-constrained embedded designs. The USB5807C family sits in Microchip's hub-controller hierarchy above the USB251x 2.0-only hubs and below larger 10-port parts like the USB5744. Key features include full USB 3.2 Gen 1 (formerly 3.1 Gen 1 / USB 3.0) 5 Gbps SuperSpeed plus USB 2.0 High-Speed/Full-Speed/Low-Speed backward compatibility on all 7 enabled downstream ports, integrated FlexConnect role-swap, per-port battery charging support (BC1.2), and unique 1.2V/3.3V dual-rail operation that simplifies internal rail generation. Per-port USB-C MUX integration eliminates external crossbar switches, reducing BOM cost and PCB area in USB-C docking designs. Architecturally, the device combines a SuperSpeed USB 3.2 Gen 1 physical layer (PHY), a USB 2.0 PHY, an embedded microcontroller for hub repeater logic, configuration ROM/OTP, and an I2C/SPI slave for host MCU management. The 100-VQFN exposed-pad package provides thermal dissipation suitable for industrial ambient operation without external heatsinking. Typical applications include USB-C docking stations, automotive head-unit USB hubs, thin-client monitors with embedded USB, USB-C monitors, embedded industrial PCs, and any USB-C multiport expansion where role-swap and charging are required. The 12x12 mm VQFN with 0.4 mm pitch is footprint-compatible with the USB5744 family for tier-up/down design reuse. When designing with this device, allocate a 4-layer PCB stack-up to maintain 90 ohm differential impedance for SuperSpeed lanes. Decouple both the 1.2V core and 3.3V I/O rails with 100 nF plus 4.7 uF ceramic capacitors placed within 2 mm of the supply pins. The exposed pad MUST be soldered to a continuous ground plane via a 5x5 thermal via array. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical PCB layout notes that are not consolidated in the manufacturer datasheet alone, giving engineers a single reference for design-in decisions.

RFQ যোগাযোগ
USB5807CT/KD - 7-Port USB 3.2 Gen 1 SmartHub, VQFN-100 | Microchip
USB5807CT/KD

USB5807CT/KD - 7-Port USB 3.2 Gen 1 SmartHub, VQFN-100 | Microchip

The Microchip USB5807CT/KD is a 7-port, SuperSpeed (SS) USB 3.2 Gen 1 SmartHub controller IC delivered in a 100-pin VQFN (12 mm x 12 mm) package with exposed thermal pad. It is USB-IF compliant under TID1595 against the USB 3.2 Gen 1 specification, supports 5 Gbps Super-Speed plus 480 Mbps Hi-Speed, 12 Mbps Full-Speed, and 1.5 Mbps Low-Speed USB signaling, and exposes I2C/SPI host management interfaces for OEM configuration. Operating supply range is 1.08 V to 3.3 V with an operating temperature window of 0 C to +70 C for the commercial CT suffix variant. A USB hub controller is a specialized interface IC that aggregates one upstream USB port into multiple downstream ports while handling the protocol stack, port power management, and traffic scheduling. SmartHubs add OEM-configurable firmware layers (MultiTRAK, flexPORT, PortSplit) on top of the standard hub state machine, enabling per-port behavior tuning, custom charging profiles, and signal-integrity adjustments without external logic. Within the broader IC hierarchy, USB5807CT/KD belongs to Interface ICs > USB Hubs > USB 3.x Hub Controllers > Power-Managed SmartHub family. Key features include 7 downstream ports configurable as USB 3.2 Gen 1 or USB 2.0, native USB Type-C support via integrated MUX logic, MultiTRAK and PortSplit technology for per-port tuning, I2C and SPI host management interfaces, and Broadcom/Microchip-proprietary low-power states with optimized thermal dissipation. The VQFN-100 package provides a compact 12 mm x 12 mm footprint suitable for embedded designs and dock/monitor applications where board area is constrained. The device uses a low-power architecture with embedded USB 3.x PHYs and a configurable hub feature ROM accessed via SPI. PortSplit allows simultaneous USB 3.x and USB 2.0 operation on the same downstream port, enabling embedded USB 3.x peripherals alongside legacy USB 2.0 devices without external muxes. Driver compatibility covers Microsoft Windows 10/8/7/XP, Apple OS X 10.4+, and mainstream Linux hub drivers, removing the need for custom host stacks. Typical applications include USB-C docking stations, multi-port USB hubs, monitors with integrated USB expansion, embedded industrial USB fan-out, and Type-C breakout boards. Choose USB5807CT/KD when a 7-port SS hub with OEM-tunable power/charging profiles is required in a thermally-constrained enclosure. When designing with this part, ensure adequate copper area under the exposed pad and route SuperSpeed pairs with 90 ohm differential impedance. The host MCU must configure PortSplit, flexPORT, and charging parameters via I2C/SPI before downstream ports enumerate at full capability. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement (but do not replace) the manufacturer datasheet DS00002237D and Microchip configuration tools.

RFQ যোগাযোগ