উপশ্রেণী

পণ্য (44,000+)

XC5VFX70T-1FF665I - Virtex-5 FXT FPGA, 6080 Logic Cells, 665-FCBGA | AMD
XC5VFX70T-1FF665I

XC5VFX70T-1FF665I - Virtex-5 FXT FPGA, 6080 Logic Cells, 665-FCBGA | AMD

The AMD Xilinx XC5VFX70T-1FF665I is a Virtex-5 FXT field programmable gate array (FPGA) built on 65 nm CMOS technology and supplied in a 665-pin FCBGA package. The device provides 6,080 logic cells, 5,455,872 RAM bits, 71,680 total logic bits, 360 user I/O, and an operating temperature range of 0°C to 85°C. Its 0.95 V to 1.05 V core supply range and 1 V technology classification identify it as a low-voltage, high-density programmable logic device. A field programmable gate array is a semiconductor device whose digital logic, interconnect, and signal-processing resources can be configured after manufacture. FPGA devices occupy the broader hierarchy of programmable logic devices and programmable semiconductors. The Virtex-5 FXT family is positioned for designs requiring substantial parallel processing, dedicated arithmetic resources, high-speed connectivity, and embedded processor capability. The XC5VFX70T-1FF665I is therefore suited to communications, networking, industrial control, signal processing, and embedded systems that need programmable hardware rather than a fixed-function application-specific integrated circuit. The listed device characteristics include 6,080 logic cells, 5,455,872 RAM bits, 71,680 total logic bits, and 360 user I/O. These figures provide a practical indication of the available digital fabric and board-level connectivity. The FXT platform also includes dedicated DSP48E resources and hard PowerPC processor elements, allowing designers to combine parallel datapaths with embedded control. The 665-FCBGA package provides dense integration while requiring careful ball-grid-array layout, power distribution, via-in-pad or via-under-ball construction, and controlled thermal design. The 0.95 V to 1.05 V supply specification is especially important for FPGA power planning. Core voltage, I/O voltage, auxiliary rails, and configuration requirements should be treated as separate design constraints. Because the device is assembled in a 665-ball FCBGA, power and ground delivery must provide low-impedance paths across the package, and the board must provide adequate thermal paths from the device to the enclosure. A high-performance FPGA can dissipate significant power even when the logic design itself is modest. Typical applications include Ethernet-connected communications equipment, industrial control systems, test and measurement platforms, video and image processing, high-speed protocol bridges, and embedded network appliances. The 360 user I/O count is useful for parallel interfaces, memory connections, clocks, and control signals, while the DSP resources support filtering, modulation, fixed-point arithmetic, and other streaming operations. The primary design consideration is the 665-FCBGA footprint. A replacement or board redesign must preserve the mechanical dimensions, ball map, power rails, configuration interface, decoupling strategy, and thermal design. Verify the complete pin and ball assignment against the manufacturer datasheet before assigning board functions. Use the manufacturer’s recommended power-decoupling and PCB-layout guidance, especially for the high-speed configuration and I/O paths. This product page consolidates the device’s key architecture, package, logic, memory, I/O, supply, and temperature characteristics with practical replacement and integration guidance. It is designed to help engineers confirm compatibility, plan power and layout, and identify whether the Virtex-5 FXT FPGA matches the required logic density, embedded processing, and 665-FCBGA implementation.

RFQ যোগাযোগ
XC5VFX70T-1FFG665CES - Virtex-5 FXT FPGA | Xilinx
XC5VFX70T-1FFG665CES

XC5VFX70T-1FFG665CES - Virtex-5 FXT FPGA | Xilinx

The Xilinx XC5VFX70T-1FFG665CES is a Virtex-5 FXT field-programmable gate array with 71,680 logic elements, 5,455,872 RAM bits, and 360 user I/O in a 665-FCBGA package. The -1 suffix identifies the performance grade, while the 665 package code denotes a 27 x 27 mm ball-grid array intended for surface-mounted, high-pin-count FPGA systems. A field-programmable gate array is a semiconductor whose digital logic can be configured after fabrication. Within the semiconductor hierarchy, an FPGA combines programmable logic, block RAM, dedicated DSP resources, programmable input/output blocks, and embedded processors. The Virtex-5 FXT platform is designed for demanding signal-processing, communications, industrial-control, test-equipment, and embedded systems where deterministic parallel processing and substantial I/O density are required. The XC5VFX70T offers 5,600 logic blocks according to the product listing, 5,455,872 total RAM bits, and 360 user I/O. Its large on-chip memory supports packet buffering, waveform storage, and data movement without frequent external-memory transfers. The high I/O count simplifies connections to parallel buses, converters, transceivers, memory devices, and custom high-speed interfaces, while the DSP resources accelerate fixed-point and finite-transform operations. The device belongs to the Virtex-5 generation, which uses a programmable logic fabric and dedicated hardware resources rather than a fixed instruction set. This architecture allows the same physical device to implement protocols, control logic, and arithmetic pipelines that would otherwise require several programmable devices. Configuration and system behavior are controlled through the FPGA development environment and the associated device support packages. Typical uses include telecommunications line cards, industrial automation controllers, radar and signal-processing front ends, network equipment, high-speed test systems, and embedded accelerators. The 360-I/O interface count is particularly useful where multiple buses and high-density board connections must be supported simultaneously. The package also supports fine-pitch assembly, requiring careful PCB layout, thermal management, and manufacturing controls. The principal design constraint is board-level implementation rather than logic capability. Use the AMD package pinout files to assign every ball correctly, and follow the manufacturer’s decoupling, configuration, power-supply, and high-speed routing guidance. Differential pairs, clocks, and high-current rails require controlled impedance and return paths to prevent signal integrity and power-integrity problems. This product reference consolidates the verified device identity, resource counts, package characteristics, search-oriented technical questions, and practical selection guidance. It also distinguishes the closest suffix variants by their documented electrical resources, helping engineers identify a pin-compatible replacement without mistaking a different package option for a drop-in substitute.

RFQ যোগাযোগ
XC5VFX70T-2FF665C - 665-Pin Virtex-5 FXT FPGA | AMD
XC5VFX70T-2FF665C

XC5VFX70T-2FF665C - 665-Pin Virtex-5 FXT FPGA | AMD

The AMD XC5VFX70T-2FF665C is a Virtex-5 FXT field-programmable gate array with 71,680 logic elements, a 665-pin FCBGA package, and a stated 1 V supply voltage. It combines programmable logic with DSP-oriented resources for communications, industrial control, signal processing, and high-speed embedded systems. The device uses 65 nm CMOS technology and is identified as a member of the Virtex-5 FXT family. An FPGA is a programmable semiconductor whose digital logic, interconnect, and dedicated processing resources are configured after manufacture. Within the product hierarchy, the XC5VFX70T-2FF665C is a Virtex-5 FXT FPGA, a field-programmable gate array, a programmable logic device, and ultimately a semiconductor. Its large logic capacity and embedded arithmetic resources make it suitable for parallel data paths, protocol handling, filtering, and control systems requiring high hardware parallelism. Key characteristics include 71,680 logic elements, 360 I/O, a 1 V operating supply, 65 nm CMOS construction, and an operating-temperature range of 0°C to 85°C for the C suffix. A listing reports an internal frequency of 1,098 MHz. These specifications support dense parallel architectures while preserving the deterministic behavior expected from FPGA-based systems. The FXT device family is positioned for communications and signal-processing workloads requiring dedicated hardware beyond ordinary LUT-based logic. Its 360 I/O provide substantial interface capacity for external memory, converters, network transceivers, clocks, and data buses. The exact I/O standards, supported memory interfaces, programmable clock resources, and DSP-block count must be selected from the manufacturer datasheet and product tables for the specific board-level design. Typical uses include high-throughput communication equipment, industrial automation, test and measurement systems, video processing, and embedded control platforms. Its programmable architecture permits logic revisions and field updates, while dedicated parallel resources can execute filtering, modulation, packet handling, or control calculations concurrently. The large FCBGA package also requires a high-density board layout with careful power, ground, and signal-integrity planning. A critical design consideration is that FPGA configuration, power sequencing, decoupling, clocking, and thermal management must be planned together. Use the manufacturer pinout and package-mechanical documentation when assigning the 665 balls, and provide all recommended power rails and bypass capacitors even when a design initially exercises only part of the device. This page combines the device's exact ordering information with verified family-level specifications, practical integration guidance, and clearly qualified replacement analysis. It distinguishes true pin-compatible ordering options from variants that change package, speed grade, or operating-temperature requirements, helping engineers choose a replacement without overlooking PCB and qualification constraints.

RFQ যোগাযোগ
XC5VFX70T-2FF665I - Virtex-5 FXT FPGA | AMD/Xilinx
XC5VFX70T-2FF665I

XC5VFX70T-2FF665I - Virtex-5 FXT FPGA | AMD/Xilinx

AMD/Xilinx XC5VFX70T-2FF665I is a Virtex-5 FXT field-programmable gate array with 71,680 logic cells, 5,455,872 RAM bits, and a maximum operating frequency of 1,098 MHz, supplied in a 665-ball FCBGA package measuring 35 mm by 35 mm. The -2 speed grade supports performance-oriented designs, while the industrial-temperature suffix identifies operation from 0°C to 85°C. A field-programmable gate array, or FPGA, is a programmable semiconductor in which configurable logic blocks, interconnect resources, block RAM, DSP resources, and I/O circuits are arranged into a flexible digital system. FPGA architecture places the FPGA within the broader semiconductor hierarchy while allowing hardware functionality to be changed after manufacture. The Virtex-5 FXT platform is designed for high-performance embedded processing, signal processing, networking, communications, and test-equipment applications. The XC5VFX70T-2FF665I combines 71,680 logic cells with 5,600 available logic array blocks or configurable logic blocks. Its 5,455,872 RAM bits support substantial buffering, packet storage, and data-plane designs. A 1,098 MHz internal frequency provides ample timing headroom for parallel logic, while the 665-ball package supports the high pin count required by wide parallel interfaces, high-speed I/O, dedicated configuration resources, and power-management connections. The Virtex-5 architecture uses the second-generation ASMBL column-based structure identified in the family documentation. This organization connects configurable logic blocks, hard processors, DSP blocks, distributed RAM, block RAM, and programmable I/O through a flexible routing network. The FXT platform is particularly useful when a design requires substantially more FPGA fabric than a compact FPGA or application-specific integrated circuit can provide. Typical uses include telecommunications line cards, network packet processing, industrial control, radar and signal-processing infrastructure, high-speed test and measurement, embedded video systems, and aerospace or defense equipment. In these applications, designers can parallelize demanding algorithms, implement multiple serial protocols, buffer high-volume data, and retain software-update flexibility through field reconfiguration. PCB implementation requires careful attention to the 665-ball FCBGA land pattern, power and ground distribution, decoupling, and high-speed routing. Because the package is large and pin-dense, thermal analysis and escape-routing planning should begin before component and via placement. Differential interfaces and other high-speed signals also require compliant layer-stack geometry and controlled impedance. This page consolidates the documented device identity, package information, speed and temperature distinctions, replacement considerations, and application-specific design guidance. It also identifies where engineer review is essential before treating a related Virtex-5 FXT order code as a drop-in replacement.

RFQ যোগাযোগ
XC5VLX110-1FF676C - 110K-Cell Virtex-5 LX FPGA | AMD
XC5VLX110-1FF676C

XC5VLX110-1FF676C - 110K-Cell Virtex-5 LX FPGA | AMD

The AMD Xilinx XC5VLX110-1FF676C is a Virtex-5 LX field-programmable gate array with 110,592 logic cells, 4,608 Kb of block RAM, 65 nm process technology, and a 1 V core supply in a 676-pin FCBGA package. The -1 speed grade supports designs requiring a predictable balance of logic capacity, memory resources, and performance, while the C suffix identifies the commercial temperature option. An FPGA is a programmable digital semiconductor whose configurable logic blocks, block RAM, programmable input/output resources, and dedicated fabric connect arbitrary digital systems on one device. The Virtex-5 LX product family occupies the FPGA and CPLD hierarchy and is commonly used where high logic density, parallel processing, flexible interfaces, or hardware acceleration are required. Its fabric allows design changes to be implemented through configuration rather than a new ASIC or fixed-function chip. The XC5VLX110 provides 110,592 logic cells and 4,608 Kb of block RAM in the 676-ball FF676 package. The package measures 27 mm by 27 mm and uses a 1 V core voltage. These resources allow implementation of substantial control logic, packet-processing functions, embedded processor systems, data acquisition pipelines, and high-speed interface bridges. The 65 nm fabrication process belongs to the generation of FPGAs that combined large programmable arrays with high-speed serial transceivers and dedicated hardware blocks. The part's resource mix makes it useful for telecommunications equipment, industrial automation, test and measurement, video processing, embedded networking, and defense or aerospace prototypes. In these systems, the FPGA can execute parallel algorithms, buffer captured data, arbitrate multiple interfaces, and adapt to evolving protocol requirements. Commercial temperature qualification supports designs in environments where junction temperature remains within the stated 0 °C to 85 °C range. A primary design consideration is that the FCBGA package requires careful PCB escape routing, controlled power and ground distribution, and adequate thermal design. Decoupling networks must be placed close to the device's supply pins, while high-speed routing requires a low-loss PCB stack-up and disciplined return-path continuity. The package pinout and board footprint should be checked against AMD's Virtex-5 package documentation before layout release. This product page consolidates the verified device identity, package information, speed-grade details, resource counts, source links, drop-in family variants, and engineering guidance into a design-focused reference for engineers evaluating a high-density Virtex-5 LX FPGA.

RFQ যোগাযোগ
XC5VLX110-1FF676I - 110592 LEs, 440 I/O FPGA | AMD
XC5VLX110-1FF676I

XC5VLX110-1FF676I - 110592 LEs, 440 I/O FPGA | AMD

The AMD XC5VLX110-1FF676I is a Virtex-5 LX field-programmable gate array with 110,592 logic elements, 440 I/O, and a 676-pin FCBGA package. It combines programmable logic resources with high-speed serial, clocking, block-RAM, and digital signal-processing capabilities for demanding embedded systems. A field-programmable gate array, or FPGA, is a programmable semiconductor whose logic and connectivity can be configured after manufacture. An FPGA sits within the broader hierarchy of programmable logic devices, digital semiconductors, and embedded processing systems. The Virtex-5 LX family combines substantial logic density with parallel and serial interfaces, allowing one device to implement control, data acquisition, packet processing, signal generation, or interface bridging. The XC5VLX110 variant provides 110,592 logic elements and 440 I/O in the 676-BBGA, also identified as FCBGA, package. Its 676-ball package supports dense board-level interconnect and is suited to systems requiring many high-speed signals. The -1 ordering code identifies a specific performance grade, while the FF package code identifies the 676-ball FCBGA configuration used by this exact MPN. Programmable logic in the Virtex-5 architecture can be organized into dedicated processing and interface resources rather than relying solely on general-purpose gates. This allows designers to implement parallel datapaths, finite-state machines, memory-intensive functions, high-speed connectivity, and mixed logic blocks efficiently. Exact clock, resource-distribution, voltage, and timing limits should be taken from the AMD device documentation and the selected design-speed grade. Typical applications include industrial control, telecommunications equipment, test and measurement systems, video-processing infrastructure, high-speed data acquisition, and networking equipment. In a telecom design, the FPGA can consolidate interface conversion, packet handling, and control logic. In instrumentation, it can coordinate parallel ADC or DAC data paths and implement precision timing functions while the 440 I/O provide extensive board connectivity. The principal design consideration is that device migration or replacement requires exact verification of the package, speed grade, temperature grade, voltage requirements, pinout, configuration compatibility, and timing margin. Board designers should use the AMD Virtex-5 package-device pinout files and the corresponding device documentation when assigning ball assignments, power rails, configuration pins, and differential I/O. This page organizes the verified device identity, 110592-LE and 440-I/O configuration, package details, sourcing information, same-package alternatives, application guidance, and PCB-level replacement considerations into a single engineering reference for FPGA hardware planning.

RFQ যোগাযোগ
XC5VLX110-1FFG676CES - 110K Logic Cell FPGA | AMD
XC5VLX110-1FFG676CES

XC5VLX110-1FFG676CES - 110K Logic Cell FPGA | AMD

The AMD XC5VLX110-1FFG676CES is a Virtex-5 LX FPGA with 110,592 logic cells, 440 user I/Os, and 4,718,592 total RAM bits in a 676-pin FCBGA package. It operates from a 0.95 V to 1.05 V core supply and provides 8,640 CLBs for high-performance programmable logic, embedded processing, connectivity, and DSP applications. The device uses 65 nm CMOS technology and is identified as the Virtex-5 LX family member with a 1.0 V nominal core voltage. A field-programmable gate array, or FPGA, is a programmable semiconductor whose logic, interconnect, and I/O resources can be configured after manufacture. The XC5VLX110-1FFG676CES belongs to the Virtex-5 LX family and combines configurable logic blocks, block RAM, dedicated multipliers, and programmable input/output resources in one device. This makes it suitable for systems requiring parallel hardware throughput, deterministic interfaces, and reconfigurable control logic. The most important device resources are the 110,592 logic cells, 8,640 CLBs, 440 user I/Os, and 4,718,592 RAM bits. The large fabric supports high-density datapaths, packet-processing architectures, video pipelines, and control systems. Dedicated block RAM enables on-chip buffering, while programmable I/O can support multiple interface standards when board-level design constraints and voltage compatibility are properly observed. The 676-pin FCBGA package provides a substantial pin count for power, ground, configuration, clock, and high-speed user signals. The device is specified with a 0.95 V to 1.05 V supply range and a junction-temperature range of 0 °C to 85 °C for the listed device configuration. Configuration, clocking, power sequencing, and thermal design should follow the Virtex-5 LX device documentation and the selected board reference design. Typical applications include telecom and networking equipment, industrial automation, video and image processing, test and measurement systems, embedded control, and high-speed data-acquisition systems. The large logic and memory resources allow multiple parallel pipelines to operate concurrently, while the FPGA fabric can be updated for protocol or functional changes after deployment. For new PCB designs, verify the selected 676-pin package footprint, ball map, and pinout against the AMD Virtex-5 package device pinout files. Provide the required core, auxiliary, and I/O supplies with adequate decoupling, and use the manufacturer's configuration and power-sequencing recommendations. The device offers substantial capacity, but package-ball assignment and board-level signal integrity remain critical to successful implementation.

RFQ যোগাযোগ
XC5VLX110-2FF676C - 110,592 Logic Cell Virtex-5 LX FPGA | AMD
XC5VLX110-2FF676C

XC5VLX110-2FF676C - 110,592 Logic Cell Virtex-5 LX FPGA | AMD

The AMD Xilinx XC5VLX110-2FF676C is a Virtex-5 LX field-programmable gate array with 110,592 logic cells, 4,608 Kb of block RAM, and 676-ball FCBGA packaging in a 27 × 27 mm footprint. It is the -2 speed-grade, commercial-temperature device in the XC5VLX110 family, making it suitable for high-density parallel processing, programmable interfaces, DSP, and embedded control systems. The FF676 package concentrates substantial programmable logic and I/O capacity into a compact surface-mount component while requiring careful PCB escape routing, power delivery, and thermal design. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O functions are configured after fabrication. Within the product hierarchy, an FPGA is a programmable logic device and semiconductor. It differs from a fixed-function application-specific integrated circuit because engineers can update its parallel processing architecture, interface mapping, and hardware acceleration blocks to support evolving system requirements without changing the physical PCB design. The XC5VLX110 device provides 110,592 logic cells and 4,608 Kb of block RAM according to the AMD Virtex-5 LX device information. The -2 suffix identifies the device speed grade, while the C suffix identifies the commercial-temperature option. Its 676-FCBGA package supports a large pin count and dense connections to surrounding PCB layers, enabling high aggregate I/O bandwidth. The package also increases assembly complexity because routing between the BGA balls and common fabrication rules must be controlled carefully. Virtex-5 LX devices combine configurable logic, programmable interconnect, dedicated block RAM, dedicated DSP resources, and selectable I/O standards. This mixed architecture allows a single FPGA to implement parallel datapaths, buffering, protocol conversion, and control functions. The exact supported I/O standards, clocking resources, DSP count, and configuration-memory organization should be confirmed in the manufacturer data sheet for the specific device revision before a board design is released. Typical uses include telecommunications line-card interface processing, industrial automation, video and image pipelines, scientific instrumentation, networking equipment, and embedded signal-processing controllers. The large logic population is particularly useful where multiple parallel channels must share a common clock and interconnect fabric. Such designs benefit from deterministic architecture, but system performance still depends on correct clocking, memory bandwidth constraints, timing closure, and the speed grade selected for the operating environment. PCB implementation should reserve independent high-quality power planes for core and I/O supplies, place decoupling capacitors close to the BGA power balls, and maintain uninterrupted reference-plane returns beneath high-speed routes. A 676-ball FCBGA assembly requires thermal-via arrays or equivalent heat-spreading structures beneath the device. Signal-integrity and power-integrity simulation should include package parasitics, connector or transceiver launch behavior, and worst-case switching activity. This page combines device identity, package constraints, sourcing information, replacement analysis, and practical implementation guidance. Its comparison material highlights the changes between speed grade, temperature grade, and package ordering codes so engineers can distinguish a genuine drop-in option from a larger footprint that would require redesign.

RFQ যোগাযোগ
XC5VLX110-2FF676I - 110K Cell Virtex-5 LX FPGA | AMD
XC5VLX110-2FF676I

XC5VLX110-2FF676I - 110K Cell Virtex-5 LX FPGA | AMD

The AMD XC5VLX110-2FF676I is a Virtex-5 LX field-programmable gate array with 110,592 logic cells, 440 I/O, and a 676-pin flip-chip BGA package. Built on 65 nm CMOS technology, the device combines programmable logic, configurable I/O, and embedded block RAM in a surface-mount FCBGA package rated by the ordering code for the -2 performance grade and industrial-temperature option. A field-programmable gate array is a semiconductor device whose digital logic functions are configured after manufacture. In the product hierarchy, an FPGA is a programmable logic device and therefore a specialized semiconductor integrated circuit. Virtex-5 LX devices target designs requiring substantial parallel processing, flexible interfaces, and high-speed programmable logic without the expense of designing a custom ASIC. The principal device characteristics are 110,592 logic cells, 440 I/O, and a 676-BBGA FCBGA package. The listed 4,718,592 device parameter is consistent with the block-memory capacity class of the Virtex-5 LX family, while the -2 ordering suffix identifies the selected speed grade. The 676-contact FCBGA package supports dense board-level integration but requires careful escape routing, thermal design, and BGA assembly control. Technically, the XC5VLX110 belongs to the 65 nm CMOS Virtex-5 LX generation and provides a large programmable fabric for parallel data processing, interface bridging, protocol conversion, and embedded control. The 440-user I/O complement is important for systems with numerous external buses, yet actual usable I/O can be lower when dedicated configuration, clock, power, and other package assignments are considered. Signal-integrity, banking, and pin-placement constraints must be checked in the device constraints before layout. Typical applications include high-throughput data acquisition, communications infrastructure, industrial imaging, test and measurement, embedded signal processing, and network equipment. The large logic-cell count supports parallel datapaths and multi-clock subsystems, while the broad I/O count simplifies connections to external memory, transceivers, converters, and high-speed interfaces. The primary design challenge is the dense FCBGA footprint. Use the AMD package pinout files when assigning power, ground, configuration pins, and I/O standards, and validate every high-speed interface against the published package and device constraints. Power rails, decoupling, thermal vias, and external memory topology require careful sign-off because package escape-routing space is limited. This product page combines the device identity, package details, drop-in ordering-code alternatives, application guidance, and engineering design notes in one place. It also distinguishes true same-footprint options from alternatives requiring different speed grades, temperature grades, or logic density.

RFQ যোগাযোগ
XC5VLX30-1FF324I - 30,720-Cell Virtex-5 LX FPGA | AMD
XC5VLX30-1FF324I

XC5VLX30-1FF324I - 30,720-Cell Virtex-5 LX FPGA | AMD

The AMD XC5VLX30-1FF324I is a Virtex-5 LX field-programmable gate array with 30,720 configurable logic cells, 220 I/O, and a 324-ball FCBGA package. It is a -1 speed-grade device with an industrial-temperature ordering suffix, designed for programmable digital logic, signal processing, interface bridging, communications, and embedded control systems. The device provides 1,179,648 FPGA gates, as identified in the product listing, while its architecture integrates programmable logic, block RAM, dedicated input/output resources, and configurable interconnect resources into one reconfigurable semiconductor package. A field-programmable gate array, or FPGA, is a digital integrated circuit whose logic, memory, and I/O behavior is defined after fabrication. An FPGA belongs to the broader programmable-logic hierarchy, which includes complex programmable logic devices and other reconfigurable digital semiconductors. Compared with a fixed-function application-specific integrated circuit, an FPGA allows parallel processing, hardware customization, in-system updates, and shorter development cycles for algorithms that benefit from simultaneous operations. The XC5VLX30 combines a 30,720-cell Virtex-5 LX implementation with 220 I/O in a compact 324-ball FCBGA package. The 220-I/O interface supports external memory, data converters, network transceivers, clock sources, and parallel peripherals, although final signal counts depend on the selected pin assignments and device constraints. Its substantial programmable logic fabric is useful for protocol handling, packet processing, filter implementations, finite-state-machine control, and custom datapaths. The “-1” portion identifies the device speed grade, while the “I” suffix denotes the industrial temperature option. These ordering details are important because the device is not simply interchangeable with every Virtex-5 LX configuration. A replacement must match the XC5VLX30 resource count, 324-ball footprint, pin assignment, speed grade, temperature range, voltage requirements, configuration interface, and any legacy or production requirements applicable to the original design. Typical uses include industrial networking equipment, test and measurement systems, video processing, communications infrastructure, embedded instrumentation, and high-speed control logic. In these systems, the FPGA can execute multiple parallel channels, maintain precise timing, or implement custom protocols while reducing reliance on external programmable devices. PCB implementation requires careful attention to power integrity, decoupling, clock routing, differential-pair geometry, and thermal performance of the large FCBGA package. Use the pinout and board-layout guidance in the manufacturer documentation, preserve the required power and ground planes, and validate signal-integrity and power-delivery margins before releasing the PCB. This page organizes the exact catalog identifiers, package information, sourcing details, technical comparisons, and practical replacement considerations for engineers evaluating the XC5VLX30-1FF324I in new or existing Virtex-5 LX designs.

RFQ যোগাযোগ
XC5VLX30-1FF676C - 30K Logic Cell Virtex-5 LX FPGA, 676-BBGA | Xilinx
XC5VLX30-1FF676C

XC5VLX30-1FF676C - 30K Logic Cell Virtex-5 LX FPGA, 676-BBGA | Xilinx

The Xilinx XC5VLX30-1FF676C is a Virtex-5 LX field programmable gate array (FPGA) providing 30,720 logic cells, 400 user I/O and approximately 1,179,648 gates in a 676-ball FCBGA (676-BBGA) package at the -1 speed grade. It is a member of the Virtex-5 family built on the second-generation ASMBL column-based architecture and is targeted at high-performance logic, DSP and multi-gigabit serial interface designs. An FPGA is a programmable semiconductor whose logic fabric, block RAM and dedicated hardware resources are configured at power-up from a bitstream held in external flash. Within the device hierarchy, the XC5VLX30-1FF676C sits in the Virtex-5 LX platform: Virtex-5 family, Virtex-5 LX sub-family, then LX device class, then the specific XC5VLX30 density. LX devices combine general-purpose configurable logic, dedicated DSP48E slices and multi-gigabit transceiver resources, making them the general-purpose member of the Virtex-5 line compared with the smaller Spartan-3 devices. Key features of this part include the 676-ball flip-chip BGA package with a 1.0 mm ball pitch footprint, a -1 performance speed grade, and full Virtex-5 LX configuration support through ISPEED, CORE Generator and ISE Design Suite. The -1 suffix denotes the mid-range speed bin, which balances timing closure margin against cost and power versus the faster -2 grade. The 'C' package suffix denotes the commercial temperature grade, and the 'FF' package code identifies the 676-ball FCBGA option. Architecturally the device uses the ASMBL column-based fabric with slice-based logic elements, distributed and block RAM, and dedicated DSP48E multiplier-accumulator blocks. Configuration data is loaded through the standard 8-bit or parallel JTAG/serial configuration ports, and the device supports multi-boot configuration handling for field updates. Because the fabric is SRAM-based, the configuration memory is volatile and a bitstream must be reloaded after each power cycle. Typical applications for the XC5VLX30-1FF676C include telecommunications line cards and aggregation equipment, industrial control and test instrumentation, high-speed data acquisition, video and image processing pipelines, and any design needing multiple high-speed serial transceivers with logic capacity beyond small Spartan devices. It also serves well in prototype-to-production migration paths where a single 676-ball board footprint must support several density options. Design considerations center on power delivery to the large BGA array and on thermal performance. A 676-ball FCBGA demands a multilayer PCB with a solid ground plane and careful decoupling close to every supply ball; use of a plane-power structure with stitching vias prevents supply droop at high toggle rates. Because Virtex-5 LX devices are legacy technologies, confirm availability and lifecycle status with AMD before committing to a long production run, and confirm the exact I/O standard, clocking resources and transceiver capabilities required by your design in the manufacturer datasheet. This page consolidates distributor availability, verified drop-in alternatives in the same 676-ball footprint, and practical implementation guidance that engineers would otherwise have to piece together from multiple sources.

RFQ যোগাযোগ
XC5VLX30-1FF676I - 30,720-Cell 400-I/O FPGA | AMD | Industrial
XC5VLX30-1FF676I

XC5VLX30-1FF676I - 30,720-Cell 400-I/O FPGA | AMD | Industrial

The AMD XC5VLX30-1FF676I is a Virtex-5 LX field-programmable gate array with 30,720 logic cells, 400 I/O, a 1098 MHz listed operating frequency, and a 676-ball FCBGA package. The device is specified as industrial grade and operates from a 1 V supply, making it suitable for embedded systems requiring programmable logic, parallel interfaces, control functions, and high-speed digital signal processing. An FPGA is a programmable semiconductor in which the logic fabric, interconnect, and input/output resources can be configured after manufacture. The Virtex-5 LX family belongs to the broader FPGA and CPLD hierarchy, combining configurable logic blocks, programmable interconnect, block RAM, dedicated input/output resources, and embedded processor options. This makes the XC5VLX30-1FF676I useful when a design needs flexible hardware behavior, rapid design revisions, or parallel hardware acceleration without committing the function to a custom ASIC. The device provides 30,720 logic cells organized into 2,400 configurable logic blocks and offers 400 I/O in a 676-ball, 27 mm by 27 mm FCBGA package. Its industrial temperature grade differentiates it from commercial-grade XC5VLX30 variants. The 1 V operating supply supports low-voltage system integration, while the large ball-count package exposes the substantial I/O and power-distribution resources associated with a high-performance programmable logic platform. The XC5VLX30-1FF676I is identified by the XC5VLX30 base device, the -1 speed grade, the FF676 package and finish designation, and the I industrial-temperature suffix. Similar suffix combinations can change speed grade, temperature grade, package finish, or lead-free status without changing the underlying Virtex-5 LX device family. Consequently, replacement decisions must compare all ordering suffixes rather than treating every XC5VLX30 part as interchangeable. Typical applications include industrial control systems, test and measurement equipment, communications infrastructure, embedded video processing, network-interface equipment, and high-throughput data acquisition. The 400 available I/O positions are particularly useful for parallel buses, clock distribution, control signals, and interfaces to external converters or memories. The 30,720-cell fabric can implement parallel datapaths, protocol engines, state machines, and fixed-function blocks concurrently rather than forcing them into a sequential microcontroller architecture. When assigning this FPGA to a board, verify power sequencing, decoupling, clocking, configuration memory, bank-voltage constraints, and the complete 676-ball footprint before layout. The large FCBGA package also requires careful via-in-pad or via-under-bump construction, differential-pair routing, and thermal design. Use the manufacturer pinout and design-support documentation to assign every power, ground, configuration, clock, and user I/O ball correctly. This product page combines the exact ordering information, package details, search-query coverage, practical design guidance, and a parameter-by-parameter comparison of verified drop-in alternatives. It also distinguishes same-footprint candidates from changes that affect speed grade or temperature range, helping engineers shortlist replacements without overlooking qualification and lifecycle constraints.

RFQ যোগাযোগ
XC5VLX30-1FFG324C - 30K Virtex-5 LX FPGA | AMD
XC5VLX30-1FFG324C

XC5VLX30-1FFG324C - 30K Virtex-5 LX FPGA | AMD

The AMD Xilinx XC5VLX30-1FFG324C is a Virtex-5 LX field-programmable gate array with 30,720 logic cells, 2,400 logic elements in the form of configurable logic blocks, 220 user I/O pins, and 1,179,648 total RAM bits, housed in a 324-pin FCBGA package. The -1 speed grade targets designs requiring a 550 MHz maximum operating frequency, while the C suffix identifies the commercial temperature grade. This combination places the device in the FPGA > CPLD > programmable-logic semiconductor hierarchy, where fixed digital logic is implemented through configurable logic, routing, block RAM, and programmable I/O resources. A Virtex-5 LX FPGA is a programmable-logic device that allows a design to be configured after manufacture for parallel processing, interface bridging, protocol handling, control, and embedded signal processing. Unlike a fixed-function application-specific integrated circuit, an FPGA combines a large array of programmable logic elements with dedicated memory and selectable I/O standards. The XC5VLX30 part provides a moderate logic capacity compared with larger Virtex-5 devices, making it suitable for designs that need substantial parallel resources without the cost and complexity of the largest devices in the family. Key resources include 30,720 logic cells, 2,400 configurable logic blocks, 220 user I/O pins, and 1,179,648 total RAM bits. The 220 I/O pins provide substantial connectivity for external memories, clocks, serial links, parallel buses, and mixed-signal interfaces. The -1 speed designation provides a maximum frequency of 550 MHz according to the published component listing, while the FCBGA-324 package supports dense board integration but requires careful escape-routing and thermal design. The device architecture combines programmable fabric with dedicated block-memory and digital signal-processing resources suitable for parallel data processing. Design engineers must select an appropriate clocking strategy, constrain timing for the -1 speed grade, and verify every implemented interface against the pinout files for the FCBGA-324 package. Because a BGA package concentrates many escape routes beneath the device, PCB stack-up, via placement, solder-mask design, and assembly process capability directly influence manufacturability and signal integrity. Typical uses include telecommunications and industrial control, network interface equipment, storage controllers, video processing, test and measurement systems, embedded security, and general-purpose signal processing. The 30K logic capacity is particularly suitable for parallel datapaths and protocol engines, while 220 user I/O pins can accommodate significant external connectivity. Migration between speed, temperature, or package variants should always be checked against the AMD package pinout files and the complete design constraint set. A critical design consideration is that FCBGA-324 assembly is more demanding than a leaded package. Use the manufacturer package drawing and pinout files to assign every ball, and reserve adequate power and ground connectivity with a layer stack that supports clean power distribution. Configuration storage, clock jitter, memory-interface timing, and thermal performance must be verified together rather than treated as independent FPGA features. This page organizes the verified device identity, package, logic and memory resources, practical design guidance, comparison points, and sourcing workflow. It also distinguishes true same-package migration candidates from devices with different packages, helping engineers evaluate replacements without assuming that similar FPGA specifications guarantee pin compatibility.

RFQ যোগাযোগ
XC5VLX30-1FFG324CES - 30K Virtex-5 LX FPGA | AMD
XC5VLX30-1FFG324CES

XC5VLX30-1FFG324CES - 30K Virtex-5 LX FPGA | AMD

The AMD XC5VLX30-1FFG324CES is a Virtex-5 LX field-programmable gate array with 30,720 logic cells, 2,400 configurable logic blocks, 220 user I/O, and 1,179,648 total RAM bits. The device uses 65 nm CMOS technology, operates from a 0.95 V to 1.05 V core supply, and is packaged in a lead-free 324-FCBGA measuring 19 mm by 19 mm. A field-programmable gate array is a programmable-logic device within the broader semiconductor and embedded-processing hierarchy. An FPGA combines configurable logic blocks, programmable interconnect, block memory, and I/O resources on one integrated circuit. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed for different protocol, control, signal-processing, or prototyping tasks after manufacture. The XC5VLX30 provides 30,720 logic cells organized as 2,400 CLBs, along with 1,179,648 RAM bits for data buffering, packet storage, and stateful logic. Its 220 user I/O support communication interfaces, memory connections, control signals, and external data buses. The 324-FCBGA package uses a dense ball-grid layout suited to systems requiring high I/O density and compact board construction. The 65 nm Virtex-5 LX architecture is designed for performance, logic density, and flexible system integration. The FFG324 device identifier identifies the 324-ball FCBGA package, while the -1 suffix denotes the device speed grade. The ES ordering suffix distinguishes this catalog option from related commercial or extended-temperature order codes. Configuration and programming details, permitted I/O standards, and power-supply sequencing must be confirmed against the Virtex-5 device documentation before layout release. Typical uses include industrial control, communications infrastructure, test and measurement, video and image processing, embedded instrumentation, and legacy high-performance logic systems. The 220 I/O and substantial block RAM make the device useful where parallel interfaces, buffered data paths, and concurrent state-machine or DSP-style processing must coexist on a single programmable platform. PCB implementation should treat the FCBGA as a fine-pitch, high-pin-count assembly. Use the manufacturer package files to define the ball map, escape routing, power distribution, and BGA-to-board land pattern. Provide the specified core and auxiliary supplies with suitable decoupling, and validate the finished design with continuity, configuration, and thermal testing. This product page consolidates the device's logic, memory, I/O, package, and environmental characteristics with same-footprint alternatives and practical implementation guidance. It supports faster component selection while retaining the need to confirm revision-specific electrical limits, package drawings, configuration requirements, and lifecycle status against the official documentation.

RFQ যোগাযোগ
XC5VLX30-1FFG324I - 30,720 LEs, 220 I/O FPGA | AMD
XC5VLX30-1FFG324I

XC5VLX30-1FFG324I - 30,720 LEs, 220 I/O FPGA | AMD

AMD / Xilinx XC5VLX30-1FFG324I is a Virtex-5 LX field-programmable gate array with 30,720 logic cells, 220 I/O, and a 324-BBGA FCBGA package measuring 19 x 19 mm. It uses the -1 speed grade and supports an industrial temperature range of -40°C to 100°C. The device combines programmable logic, block RAM, programmable I/O, dedicated configuration resources, and clock-management capabilities in one package. A field-programmable gate array is a semiconductor whose digital logic and interconnections are configured after fabrication. Within the product hierarchy, an FPGA is a programmable logic device and a semiconductor. Virtex-5 LX devices provide a higher-density platform for parallel processing, interface bridging, control logic, embedded protocol handling, and general-purpose embedded systems where fixed logic would require multiple devices or later board revisions. The XC5VLX30 device provides 30,720 logic cells, 220 user I/O, and 1,152 Kbit of block RAM in the 324-BBGA FCBGA package. Its 220 I/O make the part suitable for systems requiring substantial external connectivity. The -1 designation identifies the performance grade, while the I suffix denotes the industrial temperature option. A 550 MHz maximum operating frequency is listed for this device family, although designers must evaluate timing against their specific constraints, tool settings, and design implementation. Compared with smaller CPLDs, this FPGA offers substantially more logic capacity and block RAM for concurrent datapaths. Its 220 I/O support more external memory, control, network, instrumentation, or industrial interfaces than a low-pin-count device. The large FCBGA package also provides dense routing and high I/O availability, but it requires careful escape-routing, via assignment, assembly, and thermal planning rather than a simple two-row PCB footprint. Typical uses include industrial control, test and measurement, communications infrastructure, embedded signal processing, high-speed interface bridging, and programmable logic platforms. The 30,720-cell device can host parallel control logic alongside RAM-based data buffering, while the 220 I/O can support memory interfaces, serial links, clocks, and discrete controls. Design partitioning and resource utilization should be checked with the appropriate FPGA implementation toolchain. Before layout, review the device pin table and package drawing for every power, ground, configuration, clock, and user-I/O connection. Decoupling networks, configuration interface routing, and BGA escape routing require careful PCB planning. Programming behavior, bank voltage limits, supported interfaces, and timing must also be checked against the manufacturer datasheet before schematic and layout release. This product page organizes the core device identity, package information, practical use cases, drop-in alternatives, comparison criteria, and engineering considerations into a design-oriented reference for evaluating the XC5VLX30-1FFG324I.

RFQ যোগাযোগ
XC5VLX30-1FFG676C - 30K Logic Cell FPGA | AMD
XC5VLX30-1FFG676C

XC5VLX30-1FFG676C - 30K Logic Cell FPGA | AMD

The AMD XC5VLX30-1FFG676C is a Virtex-5 LX field-programmable gate array with 30,720 logic cells, approximately 400 I/O, and a 676-ball FCBGA package. It is manufactured on 65 nm CMOS technology and operates from a 1 V core supply. The -1 designation identifies its performance grade, while FFG676 identifies the lead-free 676-ball package configuration. A field-programmable gate array, or FPGA, is a programmable digital semiconductor whose logic fabric and interconnect can be configured after fabrication. An FPGA belongs to the broader semiconductor and programmable-logic hierarchy, where it sits between fixed-function ASICs and software-programmable processors. It combines configurable lookup tables, flip-flops, block RAM, programmable I/O, dedicated hard processors, and digital clock-management resources on one device. The XC5VLX30 provides 30,720 configurable logic cells for parallel data processing, protocol bridging, control logic, signal acquisition, and embedded system functions. Its stated 400 I/O supports connections to external memory, interfaces, converters, and custom peripherals. Block RAM supports buffering, packet storage, and data-plane functions, while dedicated DSP slices accelerate multiply-accumulate operations commonly used in communications and signal processing. The 65 nm CMOS implementation belongs to the Virtex-5 generation of AMD FPGA technology. Its configurable architecture allows a common board design to support multiple firmware or bitstream configurations, reducing the need for separate custom silicon. Selection still requires verification of the selected I/O standard, clock topology, memory interface requirements, pin constraints, and timing closure for the target design. Typical applications include industrial communications equipment, test and measurement systems, video and image processing, network interface controllers, high-speed data acquisition, and embedded control platforms. The large logic capacity and 676-ball package make the device appropriate for designs requiring substantial parallel resources rather than simple interface bridging or small control tasks. Board implementation must follow the AMD Virtex-5 package pinout and layout guidance. Decoupling, power-plane integrity, clock routing, and high-speed signaling are especially important in a 676-ball FCBGA design. PCB stackup, via counts, controlled-impedance routing, and thermal management should be reviewed before the footprint and power architecture are released. This page combines the exact ordering information, package identity, technology details, verified drop-in candidates, and application-specific engineering guidance needed to evaluate the XC5VLX30-1FFG676C. It also highlights the limits of automatic substitution, particularly when speed grade, temperature grade, device generation, or bitstream compatibility differs.

RFQ যোগাযোগ
XC5VLX30-1FFG676I - 30,720-Cell 676-BBGA FPGA | AMD
XC5VLX30-1FFG676I

XC5VLX30-1FFG676I - 30,720-Cell 676-BBGA FPGA | AMD

The AMD XC5VLX30-1FFG676I is a Virtex-5 LX field-programmable gate array with 30,720 logic cells, 400 user I/Os, 1,179,648 RAM bits, and a 676-ball FCBGA package. It is manufactured on 65 nm FPGA technology and operates from a 0.95 V to 1.05 V core-supply range, with an industrial junction-temperature rating of -40°C to 100°C. A field-programmable gate array is a programmable digital semiconductor that combines configurable logic, memory, digital signal processing, and programmable I/O in one device. The FPGA category belongs to the broader hierarchy of programmable logic devices, semiconductors, and embedded processing systems. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reconfigured to implement parallel datapaths, control logic, protocol interfaces, and signal-processing functions after manufacture. The XC5VLX30 provides 2,400 configurable logic blocks and 30,720 logic cells, together with 400 user I/Os. Its memory configuration is 1,179,648 RAM bits, equivalent to 1,152 Kbit, and its associated Virtex-5 LX family configuration includes 32 DSP48E slices. These resources support parallel control, fixed-point and floating-point digital signal processing, packet handling, image processing, and high-speed interface bridging. The part identifier encodes several device attributes. “XC5V” identifies the fifth-generation Virtex-5 architecture, “LX30” identifies the LX device with 30,720 logic cells, “-1” identifies the performance grade, “FFG676” identifies the 676-ball fine-pitch BGA package, and “I” identifies the industrial temperature grade. The 676-BBGA package supports dense board routing while requiring careful escape-routing, via-in-pad or through-via strategies, and controlled assembly conditions. Typical applications include industrial control systems, communications infrastructure, test and measurement equipment, video and image processing, radar and signal processing, high-performance computing, and embedded instrumentation. The large logic and DSP capacity is useful when algorithms require parallel execution, deterministic timing, and reconfigurable hardware rather than a fixed processor architecture. Design considerations center on power delivery, configuration memory, thermal management, and high-speed layout. Decoupling must support the FPGA core and auxiliary rails across the full voltage range, while the 676-ball package requires exact ball assignments and controlled escape routing. Configuration should follow AMD guidance for supported memories and interface voltage levels, and thermal analysis should include both core activity and adjacent board heat sources. This page combines device identity, resource details, drop-in replacement guidance, package considerations, and application-oriented engineering notes to support faster FPGA selection, PCB planning, sourcing, and design review.

RFQ যোগাযোগ
XC5VLX30-2FF324C - 30,720-Cell Virtex-5 FPGA | AMD
XC5VLX30-2FF324C

XC5VLX30-2FF324C - 30,720-Cell Virtex-5 FPGA | AMD

AMD XC5VLX30-2FF324C is a Virtex-5 LX field-programmable gate array built on 65 nm CMOS technology, with 30,720 logic cells, 220 configurable I/O, and a 324-terminal FCBGA package. The device operates from a 1 V core supply, while its specified operating-temperature range is 0°C to 85°C. It is the commercial-temperature, speed-grade -2 member of the XC5VLX30 family. A field-programmable gate array, or FPGA, is a programmable semiconductor in which digital logic is configured after manufacture. The FPGA category sits above programmable logic and configurable logic arrays and provides configurable blocks, programmable routing, and general-purpose I/O for parallel interface, control, processing, and signal-processing functions. Virtex-5 devices use Xilinx ASMBL column-based architecture, allowing system functions to be implemented as hardware rather than through sequential software execution. The XC5VLX30 provides 30,720 logic cells and 220 configurable I/O in a compact square FCBGA package. Its 19 mm by 19 mm package supports high-density board layouts where larger leaded packages would be impractical. The target MPN includes the -2 performance designation and the C commercial-temperature grade, distinguishing it from faster, industrial-temperature, or otherwise differently suffix-coded members of the same device family. The 1 V core voltage reflects the low-voltage operation associated with 65 nm FPGA technology. Designers must provide suitable supply rails and decouple the power rails close to the device because high-speed switching inside the programmable array can create transient current demands. The manufacturer datasheet remains the controlling reference for pin assignment, configuration pins, clock requirements, power sequencing, and exposed-pad connections. Typical uses for this FPGA include embedded industrial control, communications infrastructure, high-speed data acquisition, image and video processing, network equipment, and test-and-measurement systems. Its combination of logic capacity and 220 I/O is appropriate for designs requiring parallel interfaces and multiple externally accessible signals rather than a very small control-only design. Board design should begin with the exact FF324C pinout and power tables in the manufacturer datasheet. Confirm ball assignments, configuration mode, clock connectivity, voltage requirements, and thermal-management details before layout. Because this is a complex BGA device, escape routing, plane continuity, via structures, and solder-mask design require deliberate PCB engineering rather than a generic component footprint assumption. This page combines the exact device identity, package and electrical facts, qualified same-family alternatives, comparison parameters, sourcing guidance, and practical integration notes. It is intended to help engineers narrow the replacement decision while preserving the requirement for an exact package, pin-compatible footprint, and appropriate speed and temperature grade.

RFQ যোগাযোগ
XC5VLX30-2FF324I - 30,720-Cell FPGA, 220 I/O | AMD
XC5VLX30-2FF324I

XC5VLX30-2FF324I - 30,720-Cell FPGA, 220 I/O | AMD

The AMD XC5VLX30-2FF324I is a Virtex-5 LX field-programmable gate array with 30,720 configurable logic cells, 220 I/O sites, and a 1 V operating core in a 324-ball FCBGA package. It is a surface-mount FPGA intended for programmable logic, signal processing, communications, industrial control, and embedded systems requiring a substantial amount of parallel configurable logic. A field-programmable gate array, or FPGA, is a semiconductor whose logic fabric, interconnect network, and dedicated input/output resources can be configured after manufacture. FPGAs occupy the programmable-logic branch of the semiconductor hierarchy, combining the parallel performance of an application-specific integrated circuit with the flexibility of software-programmable hardware. The Virtex-5 LX family combines configurable logic blocks with hard resources for high-speed serial connectivity, memory, clocking, and digital signal processing. The XC5VLX30-2FF324I provides 30,720 logic cells and approximately 2,400 configurable logic blocks. Its 220 I/O resources support external interfaces, while the 324-ball FCBGA package offers a high connection density for complex board-level designs. The device uses a 65 nm fabrication process and operates from a 1 V core, allowing high logic density within a relatively compact package. The -2 designation identifies the device speed grade, while the I suffix identifies the industrial temperature grade. The reported operating range is -40°C to 100°C, making the device suitable for industrial equipment that must operate across extended ambient conditions. Its BGA package is square and approximately 19 mm by 19 mm, with a 1.0 mm ball pitch. Typical applications include industrial automation controllers, communications infrastructure, video and image-processing systems, instrumentation, and embedded control platforms. The large logic-cell count supports parallel datapaths and protocol engines, while dedicated FPGA resources allow designers to combine programmable logic with hardware acceleration without requiring a custom ASIC. The primary design consideration is the FCBGA footprint. The board must provide the correct ball map, power distribution, decoupling, and exposed thermal-management strategy for a 324-ball package. Configuration storage, clocking, JTAG access, voltage regulation, and I/O standards must also be planned together so that power-up, programming, and operation are deterministic. This page combines the verified device identity, package and electrical characteristics with practical selection guidance, pin-compatible family references, and design considerations. It is intended to help engineers confirm whether the XC5VLX30-2FF324I matches the required logic capacity, package, temperature grade, and system-level implementation constraints.

RFQ যোগাযোগ
XC5VLX30-2FF676C - 30,720-Cell Virtex-5 LX FPGA | AMD
XC5VLX30-2FF676C

XC5VLX30-2FF676C - 30,720-Cell Virtex-5 LX FPGA | AMD

The AMD XC5VLX30-2FF676C is a Virtex-5 LX field-programmable gate array with 30,720 logic cells, 400 I/O, and a 676-ball FCBGA package. It is built on a 65 nm CMOS process and operates from a 1 V supply, targeting high-performance programmable logic designs requiring substantial logic density and I/O flexibility. The FPGA is part of the Virtex-5 family, whose architecture uses configurable logic blocks, programmable routing, block RAM, DSP resources, and dedicated I/O resources to implement complex digital systems. A field-programmable gate array is a programmable semiconductor in which the logic fabric, interconnect, and specialized blocks are configured after manufacture. FPGAs are widely used for rapid prototyping, communications infrastructure, industrial control, test equipment, signal processing, and embedded systems where hardware revisions are needed without changing the printed circuit board. The Virtex-5 LX platform extends this FPGA hierarchy into the Virtex family, FPGA family, programmable logic device class, and semiconductor category. The XC5VLX30-2FF676C provides 30,720 logic cells and 400 I/O in a compact 676-ball FCBGA package. The -2 speed designation identifies the device speed grade, while the package suffix identifies the mechanical package and ball pattern. Its 65 nm CMOS implementation supports high-density designs with programmable logic, block RAM, and DSP-based arithmetic. The 676-ball package provides a large I/O complement for external memory, high-speed interfaces, clocks, data buses, and control signals. Typical applications include communications and networking equipment, industrial automation, instrumentation, defense-related electronics, video processing, and high-speed test systems. The large I/O count is particularly useful when a design combines parallel data paths, external memory interfaces, high-speed serial links, and control logic. The device can support designs requiring deterministic real-time behavior, parallel processing, or custom protocol handling that would be cumbersome with fixed-function logic. PCB implementation requires careful attention to the 676-ball FCBGA land pattern, power and ground distribution, decoupling, via placement, and high-speed routing. Keep the power and ground planes continuous, place decoupling capacitors near the relevant supply pins, and follow the manufacturer’s package and pinout documentation for ball assignments. Confirm the selected memory interface, clocking scheme, configuration method, and I/O standards against the complete device documentation before finalizing the layout.

USD $331.91 স্টক অনুপস্থিত
XC5VLX30-2FF676I - 30,720-Cell Virtex-5 LX FPGA | AMD
XC5VLX30-2FF676I

XC5VLX30-2FF676I - 30,720-Cell Virtex-5 LX FPGA | AMD

The AMD XC5VLX30-2FF676I is a Virtex-5 LX field-programmable gate array with 30,720 logic cells, 400 user I/O, 1,179,648 RAM bits, and a 676-ball FCBGA package. It uses 65 nm CMOS technology and operates from a 0.95 V to 1.05 V core supply. The industrial-temperature suffix I supports an operating junction-temperature range of -40°C to 100°C. The -2 speed grade, 676-ball package, and FPGA architecture place it in the Virtex-5 LX family for configurable logic, embedded processing, high-speed serial connectivity, and system-level signal processing. A field-programmable gate array is a programmable digital integrated circuit whose interconnect and logic resources are configured after manufacture. An FPGA belongs to the broader hierarchy of programmable logic devices, semiconductor integrated circuits, and digital electronics. Unlike a fixed-function application-specific integrated circuit, a Virtex-5 LX FPGA can implement parallel processing, control, protocol, and interface logic in one device, allowing hardware behavior to be revised without changing the printed circuit board. The XC5VLX30 provides 2,400 logic blocks according to the device overview, together with 30,720 logic cells for constructing datapaths, state machines, controllers, and arithmetic pipelines. Its 1,179,648 bits of block RAM allow substantial data buffering and dual-port storage without external memories. The 400 user I/O provide high connectivity for parallel buses, clocking, control signals, and high-speed interfaces. The 676-ball FCBGA measures 27 mm by 27 mm and supports dense PCB routing required by large Virtex-5 designs. The -2 designation identifies the device performance grade within the Virtex-5 LX family, while I identifies the industrial temperature option. Device configuration and bitstream loading are central to using an FPGA because the interconnect, logic resources, block RAM, and I/O behavior are established through programmable configuration data. In multi-rail systems, power sequencing, configuration access, and ancillary voltage rails must be coordinated with the device's system power-management design. Typical uses include telecommunications line-card control, industrial automation, high-throughput signal processing, network-interface data planes, instrumentation, and ASIC prototyping. The large I/O count is particularly useful when a design combines multiple bus widths, memory interfaces, clock domains, and high-speed serial links. The device can consolidate programmable control and datapath functions that might otherwise occupy several fixed-function devices, although implementation complexity and FPGA resource planning remain important considerations. PCB design requires careful treatment of the FCBGA escape routing, power delivery, decoupling, and thermal path. Keep core and auxiliary supply planes stable across the device, place decoupling structures near the relevant balls, and follow the manufacturer's package and pinout documentation when assigning power, ground, configuration, clock, and differential pairs. Validate signal integrity and power integrity with the complete configuration and system load before production release. This product record combines the identified device architecture, package, logic and memory resources, temperature range, alternative-device analysis, and implementation guidance. It supports direct comparison of the industrial -2 grade with compatible same-family Virtex-5 LX variants while preserving the requirement that a proposed replacement use the same 676-ball footprint and remain suitable for the intended temperature and performance requirements.

RFQ যোগাযোগ
XC5VLX30-2FFG676C - 30,720-Cell 65 nm FPGA | AMD
XC5VLX30-2FFG676C

XC5VLX30-2FFG676C - 30,720-Cell 65 nm FPGA | AMD

The AMD XC5VLX30-2FFG676C is a Virtex-5 LX field-programmable gate array with 30,720 programmable logic cells, 400 I/O, 65 nm CMOS technology, and a 1 V core supply in a 676-pin FCBGA package. It combines a large programmable fabric, embedded hard resources, and high-speed parallel interfaces for communications, industrial control, signal processing, and embedded computing systems. A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. Within the broader device hierarchy, an FPGA is a programmable-logic IC, an application-specific integrated circuit, and ultimately a semiconductor. Unlike a fixed-function ASIC, an FPGA allows field upgrades, shorter development cycles, and parallel hardware implementations of functions such as protocol handling, filtering, encryption, and control logic. Key characteristics of the XC5VLX30-2FFG676C include 30,720 logic cells, 400 I/O, a 65 nm fabrication process, a 1 V operating core, and a 676-pin FCBGA package. The -2 speed designation identifies its performance grade, while the FFG676 package suffix identifies a 676-ball fine-pitch grid-array configuration designed for surface mounting. The large I/O count supports high-pin-count board-level integration without requiring a separate external interface device. The Virtex-5 LX architecture combines configurable logic with dedicated hardware resources for serial connectivity, memory, clocking, and signal processing. This mixed resource model lets designers allocate parallel logic to control paths and DSP-style operations while using hard serial transceivers for high-speed links. Exact block counts, supported high-speed interface standards, memory capacity, and electrical timing values must be confirmed in the applicable Virtex-5 data sheet before a new design is released. Typical applications include industrial Ethernet equipment, telecom line cards, radar and signal-processing modules, high-speed data acquisition, video infrastructure, server-storage controllers, and embedded control platforms. The 400-I/O device is particularly useful when a design must connect multiple buses, memory devices, clocks, and high-speed fabric interfaces on a compact board. PCB implementation requires careful attention to the 676-ball FCBGA land pattern, power and ground distribution, decoupling, ball-grid escape routing, and thermal management. Use AMD package pinout files and the applicable device data sheet to assign every ball, power plane, and signal. Validate high-speed interfaces with controlled-impedance routing and complete signal-integrity and power-integrity simulations before fabrication. This product page combines the exact orderable MPN, package and technology characteristics, sourcing information, replacement constraints, and application-oriented engineering guidance. It also distinguishes confirmed drop-in ordering variants from substitutions that require a new pinout, tool, qualification, or board redesign.

RFQ যোগাযোগ
XC5VLX30-2FFG676I - 30,720-Cell FPGA | Xilinx
XC5VLX30-2FFG676I

XC5VLX30-2FFG676I - 30,720-Cell FPGA | Xilinx

The Xilinx XC5VLX30-2FFG676I is a Virtex-5 LX field-programmable gate array with 30,720 logic cells, 400 general-purpose I/O, and 1,179,648 RAM bits, packaged in a 676-ball FCBGA. The device is manufactured on a 65 nm process and operates from a 1.0 V core supply, with the documented supply range of 0.95 V to 1.05 V. Its industrial temperature designation covers a junction-temperature range of -40°C to 100°C. A field-programmable gate array is a programmable-logic semiconductor whose configurable logic blocks, block RAM, input/output resources, and programmable interconnect can implement digital systems after fabrication. The Virtex-5 LX FPGA belongs to the broader hierarchy of FPGA, programmable-logic device, semiconductor, and embedded-logic product categories. It is intended for designs requiring deterministic parallel processing, flexible I/O, dedicated memory, and field-updatable configuration rather than a fixed application-specific circuit. The XC5VLX30 provides 2,400 logic array blocks, also identified as configurable logic blocks, for implementing combinational and sequential logic. Its 1,179,648 RAM bits support buffers, lookup tables, packet data, control planes, and embedded-memory functions. With 400 general-purpose I/O, the device can connect external memory, high-speed interfaces, clocks, serial links, and control peripherals. The -2 suffix identifies its speed grade, while FFG676 identifies the 676-ball flip-chip BGA package and G package variant. The 676-pin FCBGA provides dense interconnect through ball-grid-array contacts and is intended for board layouts requiring the full 400-user-I/O complement of this device. Its 27 mm by 27 mm package places substantial routing density close to the FPGA, but it also requires careful escape routing, via-in-pad or via-beneath-array planning, power-plane segmentation, and thermal verification. The device’s 65 nm implementation and 1.0 V core supply place exact timing, current, and thermal limits at the center of system sign-off rather than relying only on device-selection tables. Typical uses include telecommunications line-card control, industrial networking, high-speed data acquisition, embedded video processing, storage controllers, and instrumentation. Its parallel architecture is valuable where throughput, deterministic latency, flexible interfaces, or post-deployment reprogrammability matter more than minimizing unit cost or board area. Designers can also use FPGA configuration mechanisms to update logic, interface protocols, or control functions without replacing the physical component. PCB implementation should follow the manufacturer’s package pinout and design-guidance files, with particular care given to 676 ball-grid-array escape routing and independent core-supply distribution. Because the package provides 400 user I/O alongside 30,720 logic cells, signal-integrity and power-integrity checks should be performed at the board level. Configuration storage, startup behavior, clocking, decoupling, and thermal management must also be validated together. This product page combines verified device characteristics, package details, temperature information, drop-in family variants, and application-specific engineering guidance. It also distinguishes electrically similar suffix choices that can affect temperature grade, speed grade, lead-free construction, or system design validation, helping engineers narrow a replacement without overlooking package and qualification constraints.

RFQ যোগাযোগ
XC5VLX30-3FF324C - Virtex-5 LX 30K Logic Cell FPGA, 324-BBGA
XC5VLX30-3FF324C

XC5VLX30-3FF324C - Virtex-5 LX 30K Logic Cell FPGA, 324-BBGA

The AMD (Xilinx) XC5VLX30-3FF324C is a Virtex-5 LX field-programmable gate array (FPGA) with 30,720 logic cells, 220 user I/O, and 1,179,648 bits of block RAM, offered in a 324-ball flip-chip BGA (FCBGA) package. It is built on the second-generation ASMBL column-based architecture and targets the -3 speed grade. An FPGA (field-programmable gate array) is a programmable logic device: a matrix of configurable logic blocks (CLBs) and programmable interconnect that can be reconfigured at the field to implement any digital design from a single HDL source. In the Xilinx hierarchy, Virtex-5 LX is a general-purpose platform family that sits above the smaller Spartan-3 family and below the larger Virtex-5 LXT/SXT and Virtex-6 device families. The Virtex-5 LX family targets networking, telecommunications, industrial control, and embedded systems requiring medium logic density with high-speed serial and memory resources. Key features of the XC5VLX30-3FF324C include 30,720 logic cells organized in 4,800 4-input LUTs, 1,179,648 bits (1.125 Mbit) of 18 Kb block RAM, and 220 I/O distributed across the 324-BBGA package. The -3 speed suffix denotes the faster of the standard Virtex-5 LX performance grades. The device is offered in a monolithic 324-ball FCBGA package with a square body and ball terminals. Architecturally, the XC5VLX30 uses the ASMBL column-based fabric, with configurable logic blocks, dedicated 18 Kb block RAM tiles, 18x18 multiplier accumulators, and dedicated distributed RAM per LUT. Because the fabric is column-based, routing between columns is highly regular and repeatable, which simplifies timing closure compared with row-based fabrics of the previous generation. Typical applications include network interface and line-card designs, industrial control and test equipment, telecom baseband and cross-connect equipment, mid-range embedded video processing, and any design needing a mid-density programmable logic engine in a single 324-ball package. A key design consideration is that the Virtex-5 LX family is a mature generation: new designs should be reviewed against current-generation AMD devices where board area, power, and toolchain support allow, while existing Virtex-5 platforms can reuse the same pinout and bitstream tool flow. This page consolidates parametric details, drop-in replacement candidates for the 324-BBGA footprint, and practical design guidance that is not assembled in one place in the manufacturer documentation.

RFQ যোগাযোগ