উপশ্রেণী

পণ্য (44,000+)

XC7A200T-1SBG484C - 215K Artix-7 FPGA IC | AMD
XC7A200T-1SBG484C

XC7A200T-1SBG484C - 215K Artix-7 FPGA IC | AMD

The AMD XC7A200T-1SBG484C is an Artix-7 field-programmable gate array (FPGA) with 215,360 logic cells, 33,650 configurable blocks, and 13,140 Kbit of block RAM in a 484-ball FCBGA package. It operates from a 950 mV to 1.05 V core supply and provides 285 general-purpose I/O positions, making it the largest device in the Artix-7 family. The -1 speed grade is intended for performance-oriented designs requiring faster timing than the standard Artix-7 grade. An FPGA is a programmable semiconductor in the broader logic-device and digital-semiconductor hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines programmable logic blocks, block RAM, digital signal processing resources, programmable I/O, and configuration memory into one device. The resulting hardware can implement parallel data paths, control systems, signal processing, and programmable interface logic without changing the physical IC. The XC7A200T-1SBG484C provides 13,140 Kbit of block RAM and 740 DSP slices, as identified in the Artix-7 family data. These resources support buffer management, video processing, control logic, high-throughput data acquisition, and embedded signal-processing pipelines. Its 28 nm Artix-7 implementation is optimized for performance per watt and low system cost, making the device suitable for industrial, communications, instrumentation, and embedded-control systems where greater programmable capacity is needed than smaller Artix-7 devices offer. A principal advantage of this FPGA is the density available from one 484-ball package. The 285 general-purpose I/O positions allow numerous external interfaces to coexist, while the large logic and RAM inventories support multi-channel designs. The device family also supports high-speed serial transceivers in suitable package configurations. Because the exact exposed transceiver count and I/O standards can depend on package and bank assignments, the device pinout files should be checked against the selected board-level connections. Typical applications include industrial machine vision, test and measurement equipment, communications infrastructure, embedded video processing, robotics, and high-performance control systems. In these systems, the XC7A200T-1SBG484C can consolidate control logic, data acquisition, buffering, and interface conversion in a single programmable device while reducing the number of discrete components compared with a multi-chip implementation. PCB design must specifically account for the FCBGA-484 footprint, multilayer construction, high-speed routing, dense power distribution, and thermal management. Place the decoupling network close to the device, route configuration and high-speed interfaces according to the AMD design guidance, and keep sensitive signals away from noisy power paths. This page also organizes package and family information, replacement constraints, application guidance, and engineering-focused comparisons for faster component selection.

RFQ যোগাযোগ
XC7A200T-1SBG484I - 215K Logic Cell Artix-7 FPGA | AMD
XC7A200T-1SBG484I

XC7A200T-1SBG484I - 215K Logic Cell Artix-7 FPGA | AMD

The AMD XC7A200T-1SBG484I is an Artix-7 field-programmable gate array with 215,360 logic cells, 285 I/O, and a 484-terminal lidless FCBGA package measuring 19 mm x 19 mm. Built on 28 nm FPGA technology, this device combines programmable logic resources with approximately 13,140 Kb of block RAM and supports clock frequencies up to 1,098 MHz. A field-programmable gate array is a reconfigurable digital semiconductor that combines an array of programmable logic blocks, programmable I/O, embedded memory, dedicated processing resources, and clock-management circuitry. Within the FPGA hierarchy, the XC7A200T belongs to the Artix-7 family and is positioned for designs that require substantial parallel processing in a relatively compact, power-conscious device. The XC7A200T-1SBG484I provides 215,360 programmable logic cells and 285 user I/O in its SBG484 package. Its 28 nm process technology supports high performance and low power consumption, while the -1 speed grade targets demanding timing applications. The device operates from a 0.95 V to 1.05 V core supply, according to the manufacturer datasheet listing, and can be paired with external memory and interface circuitry for higher-bandwidth designs. Artix-7 devices integrate programmable logic with block RAM, DSP slices, dedicated clock pins, and high-performance I/O resources. The 215,360-cell device is useful when a fixed application-specific integrated circuit would require expensive redesigns. Because configuration data determines the implemented circuit, one hardware platform can support multiple firmware revisions, protocol variants, or field-upgradeable functions after manufacturing. Typical uses for this FPGA include industrial control, robotics, high-speed data acquisition, embedded vision, communications infrastructure, test equipment, and low-latency signal processing. The large logic capacity is especially useful for parallel sensor aggregation, hardware protocol bridges, packet processing, and control systems that combine deterministic hardware timing with programmable decision logic. The 19 mm x 19 mm lidless FCBGA requires careful PCB layout, controlled power delivery, and thermal management. Designers should follow the AMD package pinout files and UG475 when assigning balls, and should validate the selected memory interface, configuration method, voltage rails, and differential I/O requirements against the Artix-7 data sheet before layout release. This page combines family-level specifications, verified package details, drop-in speed-grade alternatives, and application-focused design guidance. It also organizes the most useful procurement and documentation entry points for engineers comparing the XC7A200T-1SBG484I with related Artix-7 devices.

RFQ যোগাযোগ
XC7A200T-2FB484I - 215K Logic Cell Artix-7 FPGA | AMD
XC7A200T-2FB484I

XC7A200T-2FB484I - 215K Logic Cell Artix-7 FPGA | AMD

The AMD XC7A200T-2FB484I is an Artix-7 field-programmable gate array with 215,360 logic cells, 13,455,360 RAM bits, and 285 I/O positions, housed in a 484-ball FCBGA package. Built on a 28 nm process, the device combines programmable logic, block RAM, digital signal processing resources, and four GTP transceiver channels in a low-cost FPGA platform intended for compact, high-performance embedded systems. An FPGA is a semiconductor whose digital logic, interconnections, and input/output behavior are configured after manufacture. The Artix-7 family belongs to the broader FPGA hierarchy, which sits above fixed-function logic and programmable signal-processing devices. Compared with an ASIC, an FPGA permits design revisions, hardware reuse, and rapid prototyping without fabricating a custom integrated circuit. Its configurable parallel processing fabric is especially useful for image pipelines, control systems, communications, and data acquisition. The XC7A200T-2FB484I provides 13,455,360 RAM bits for buffers, packet storage, and general-purpose logic. Its 285 I/O positions support integration with external memory, control signals, serial transceivers, and industrial peripherals. Four GTP channels support high-speed serial links, while the -2 speed grade identifies a performance grade within the Artix-7 portfolio. The industrial-temperature suffix supports designs intended for extended-temperature operation. Artix-7 devices use a programmable fabric organized into configurable logic blocks and programmable interconnect resources. This architecture allows parallel datapaths to operate simultaneously, making the device suitable for video acquisition, sensor fusion, protocol bridging, and embedded control. Because FPGA designs depend on clocks, I/O standards, power rails, and tool-supported constraints, the device must be paired with an appropriate clocking scheme, power architecture, and device-aware PCB design. Typical applications include industrial machine vision, test and measurement equipment, embedded communications, radar or signal-processing front ends, and compact control systems. The 484-ball package supports dense connections but requires careful escape routing and multilayer PCB construction. Four GTP links are valuable for high-speed serial interfaces, while the large logic and RAM resources support parallel processing and substantial data buffering. A key design consideration is that the 484-ball FCBGA package requires a constrained, multilayer PCB with controlled power and ground distribution. Use the AMD package pinout files and the device-specific pin constraints when assigning banks, differential pairs, power pins, and transceiver connections. Confirm the selected clocking, memory interface, and I/O standards before finalizing the schematic and layout. This product record combines device resource details, package information, verified source links, comparison guidance, and practical PCB-design considerations to accelerate component selection and board planning.

RFQ যোগাযোগ
XC7A200T-2FB676I - 215K Artix-7 FPGA | Advanced Micro Devices
XC7A200T-2FB676I

XC7A200T-2FB676I - 215K Artix-7 FPGA | Advanced Micro Devices

Advanced Micro Devices XC7A200T-2FB676I is an Artix-7 field-programmable gate array with 215,360 logic cells, 400 I/O, 33,650 adaptive logic modules, and a 676-ball FCBGA package. The device uses 28 nm FPGA technology, operates from a 1 V core supply, and is built around the 215K XC7A200T logic resource configuration for programmable control, signal processing, and interface designs. An FPGA is a programmable semiconductor containing configurable logic blocks, programmable I/O, block RAM, DSP resources, and dedicated clocking circuitry. Within the device hierarchy, the XC7A200T belongs to the Artix-7 FPGA family, the Xilinx/AMD FPGA portfolio, and the broader category of programmable logic devices. Its large fabric allows parallel architectures that are difficult to implement with fixed-function processors or conventional discrete logic. The Artix-7 architecture provides 215,360 logic cells, 33,650 adaptive logic modules, 13.32 Mbit of block RAM, 740 DSP slices, and 400 user I/O according to the AMD Artix-7 family information. The -2 speed grade supports higher performance than the -1 grade, while the industrial I suffix identifies the intended temperature range. MMCM, PLL, and DSP resources support clock generation, timing, and arithmetic-heavy signal-processing pipelines. The XC7A200T-2FB676I combines programmable logic with integrated memory and DSP capacity. A design can use parallel lanes for image processing, protocol bridging, fixed-point arithmetic, or general-purpose data acquisition. Its 400 I/O provide substantial connectivity, while the FCBGA-676 package supports fine-pitch escape routing and requires careful power, ground, and differential-pair layout in multilayer PCBs. Typical uses include industrial control, test and measurement, communications infrastructure, embedded video processing, robotics, and high-throughput data conversion. The large fabric is particularly useful when an application requires deterministic parallel operation, flexible I/O, or hardware acceleration without replacing an FPGA with a larger processor-based system. The main design consideration is package complexity. The 676-ball FCBGA requires a dense escape-routing strategy, multiple power rails, carefully controlled decoupling, and assembly-process alignment. Use the AMD package pinout files and UG475 when assigning balls and planning the PCB stackup, and complete signal-integrity and power-integrity simulations before fabrication. This page combines the Artix-7 device specification with package-aware alternatives, application guidance, and design notes intended to accelerate schematic capture, PCB planning, and sourcing decisions for XC7A200T-2FB676I implementations.

RFQ যোগাযোগ
XC7A200T-2FBG484C - Artix-7 FPGA 740K Logic Cells | AMD Xilinx
XC7A200T-2FBG484C

XC7A200T-2FBG484C - Artix-7 FPGA 740K Logic Cells | AMD Xilinx

The AMD Xilinx XC7A200T-2FBG484C is a high-performance Artix-7 family FPGA delivering 740K logic cells, 215K logic slices, and 13 Mb of block RAM in a 484-ball FBGA package. It operates with a core voltage of 1.0V and supports I/O standards from 1.2V to 3.3V, making it suitable for a wide range of applications. Data verified as of 2026-08-04. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. It consists of programmable logic blocks, configurable interconnects, and I/O blocks, allowing for flexible implementation of digital circuits. FPGAs sit within the broader category of programmable logic devices (PLDs), which are part of the semiconductor industry. They are used in applications requiring parallel processing, high-speed I/O, and reconfigurable logic, such as communications, industrial automation, and aerospace. Key features of the XC7A200T-2FBG484C include 740K logic cells, 215K logic slices, 13 Mb of block RAM, 740 DSP slices, and 10.3 Mb of distributed RAM. It also features 16 GTX transceivers supporting up to 6.6 Gbps, 10 clock management tiles (CMTs), and 285 user I/O pins. The device supports multiple I/O standards including LVCMOS, LVDS, and HSTL, and includes hardened memory controllers for DDR3 and DDR4. The Artix-7 architecture is built on a 28nm high-k metal gate (HKMG) process, offering a balance of performance, power, and cost. The device includes advanced clocking resources, such as PLLs and MMCMs, and supports partial reconfiguration for dynamic logic updates. The 484-ball FBGA package provides a compact footprint with excellent thermal and electrical characteristics, enabling high-density designs. Typical applications include software-defined radio (SDR), medical imaging, motor control, and high-performance computing. The high logic density and DSP slices make it ideal for signal processing, while the GTX transceivers support high-speed serial communication in networking and video applications. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple supply rails (VCCINT, VCCAUX, VCCO) and a proper power-up sequence. Use the Xilinx Power Estimator (XPE) to calculate power consumption and design an appropriate thermal solution. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the AMD Xilinx datasheet, providing a comprehensive resource for engineers.

USD $320.00 যোগাযোগ
XC7A200T-2FBG484I - Artix-7 FPGA 215K Logic Cells | AMD Xilinx
XC7A200T-2FBG484I

XC7A200T-2FBG484I - Artix-7 FPGA 215K Logic Cells | AMD Xilinx

The AMD Xilinx XC7A200T-2FBG484I is a high-performance Artix-7 family FPGA featuring 215,360 logic cells, 16,825 CLBs, and 13,455,360 bits of Block RAM, packaged in a 484-ball FBGA (FBG484) with a -2 speed grade and industrial temperature range (-40°C to +100°C). It delivers 285 user I/O pins, making it ideal for high-bandwidth signal processing and connectivity applications. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing programmable logic blocks and interconnects that can be configured after manufacturing to implement custom digital circuits. FPGAs sit within the broader category of programmable logic devices (PLDs), which are part of the application-specific integrated circuit (ASIC) family, but offer reconfigurability that ASICs lack. The Artix-7 family is positioned as a mid-range FPGA optimized for cost-sensitive, high-volume applications requiring high-speed transceivers and DSP capabilities. Key features include 740 DSP48E1 slices for high-throughput digital signal processing, 16 high-speed transceivers supporting up to 6.6 Gb/s, and 285 I/O pins with support for multiple I/O standards including LVCMOS, LVDS, and HSTL. The device also integrates a PCIe Gen2 block, 10/100/1000 Ethernet MACs, and an analog-to-digital converter (XADC) for system monitoring. The -2 speed grade provides balanced performance for logic and I/O, while the industrial temperature range ensures reliable operation in harsh environments. Architecturally, the XC7A200T is built on the 28nm high-k metal gate (HKMG) process, offering a 50% lower power footprint compared to previous generations. The configurable logic blocks (CLBs) contain 6-input look-up tables (LUTs) and dual flip-flops, enabling efficient implementation of complex logic functions. The device supports partial reconfiguration, allowing dynamic updates to specific regions without disrupting the entire design. Typical applications include software-defined radio (SDR), medical imaging, industrial motor control, and high-performance computing acceleration. The high transceiver count and DSP resources make it particularly suited for communications infrastructure, such as LTE/5G base stations and network switches, where high-speed serial links and parallel processing are essential. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple voltage rails (VCCINT, VCCAUX, VCCO) with proper sequencing, and the FBG484 package has a thermal resistance of 8.4°C/W (theta_JA) that necessitates adequate airflow or heatsinking for high-utilization designs.

USD $89.15 যোগাযোগ
XC7A200T-2FBG676C - 740K Logic Cells FPGA | AMD Xilinx
XC7A200T-2FBG676C

XC7A200T-2FBG676C - 740K Logic Cells FPGA | AMD Xilinx

The AMD Xilinx XC7A200T-2FBG676C is a high-performance Artix-7 family FPGA delivering 740K logic cells, 215K logic slices, and 13 Mb of block RAM in a 676-ball FCBGA (FBG676) package. It operates with a core voltage of 1.0V and supports I/O standards including LVCMOS, LVDS, and HSTL across 400 user I/O pins. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing programmable logic blocks and programmable interconnects that can be configured after manufacturing to implement any digital logic function. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), which are a subset of integrated circuits (ICs). Unlike fixed-function ASICs, FPGAs offer reconfigurability, making them ideal for prototyping, rapid iteration, and applications requiring in-field updates. The Artix-7 family is optimized for cost-sensitive, high-volume applications requiring high logic density and low power. Key features include 740K logic cells, 215K logic slices, 13 Mb of block RAM, 740 DSP slices, and 16 high-speed transceivers supporting up to 6.6 Gbps. The device also integrates a 12-bit 1 MSPS ADC (XADC) for on-chip temperature and voltage monitoring. The FBG676 package provides 400 user I/O pins with support for multiple I/O standards, enabling flexible board design. The XC7A200T-2FBG676C is built on the 28nm high-k metal gate (HKMG) process technology, balancing performance and power efficiency. The -2 speed grade offers a balance of performance and cost, with internal clock speeds up to 628 MHz. The device supports partial reconfiguration, allowing dynamic updates to specific logic regions without disrupting the entire design. Typical applications include software-defined radio (SDR), medical imaging, industrial motor control, and high-performance computing acceleration. The high logic density and DSP slices make it suitable for digital signal processing (DSP) tasks such as FFTs and filters, while the transceivers enable high-speed serial communication in networking equipment. When designing with this FPGA, ensure adequate decoupling capacitors on all power rails (VCCINT, VCCAUX, VCCO) and follow the recommended power-up sequence. The configuration interface (JTAG, SPI, or BPI) must be carefully planned to support the required boot mode and update strategy.

USD $550.00 যোগাযোগ
XC7A200T-2FBG676I - 740K Logic Cells FPGA | AMD Xilinx
XC7A200T-2FBG676I

XC7A200T-2FBG676I - 740K Logic Cells FPGA | AMD Xilinx

The AMD Xilinx XC7A200T-2FBG676I is a high-performance Artix-7 family FPGA delivering 740K logic cells, 215,360 logic slices, and 13,140 Kb of Block RAM in a 676-ball FCBGA (FBG676) package. It operates with a core voltage of 1.0V and supports I/O standards including LVCMOS, LVDS, and HSTL, with up to 400 user I/O pins. The device is designed for high-bandwidth, low-power applications requiring substantial programmable logic and DSP resources. An FPGA (Field-Programmable Gate Array) is a semiconductor device containing configurable logic blocks (CLBs) and programmable interconnects that can be programmed after manufacturing to implement arbitrary digital logic functions. FPGAs sit within the broader category of programmable logic devices (PLDs), which are part of the larger family of integrated circuits (ICs). Unlike fixed-function ASICs, FPGAs offer reconfigurability, making them ideal for prototyping, rapid iteration, and applications where requirements may evolve. The Artix-7 family is positioned as a mid-range FPGA balancing logic density, DSP capability, and power efficiency, bridging the gap between low-cost Spartan-7 and high-performance Kintex-7 devices. Key features of the XC7A200T-2FBG676I include 740 DSP48E1 slices for high-speed digital signal processing, 10.5 Mb of distributed RAM, and support for PCIe Gen2 x4 and 16 high-speed transceivers running at up to 6.6 Gb/s. The device also integrates a 12-bit 1 MSPS XADC for analog monitoring, and supports partial reconfiguration for dynamic logic updates. With a speed grade of -2, it offers balanced performance for a wide range of applications. Architecturally, the XC7A200T is built on a 28nm high-k metal gate (HKMG) process, providing a 50% power reduction compared to previous generations. The device features a flexible clocking architecture with 10 CMTs (Clock Management Tiles) and 32 global clock buffers, enabling complex multi-clock domain designs. The FBG676 package provides 676 balls with a 27mm x 27mm body, offering excellent thermal and electrical characteristics for high-density designs. Typical applications include software-defined radio (SDR), medical imaging, industrial motor control, and high-performance computing acceleration. The device's high logic density and DSP resources make it suitable for implementing complex algorithms such as FFTs, filters, and image processing pipelines. Its transceiver capability supports high-speed serial protocols like PCIe, Gigabit Ethernet, and CPRI. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple supply rails (VCCINT, VCCAUX, VCCO) with proper sequencing, and a heatsink or active cooling is recommended for high-utilization designs. Use AMD's Vivado Design Suite for configuration and implementation, and refer to the Artix-7 FPGA Data Sheet (DS181) for detailed specifications.

USD $100.00 যোগাযোগ
XC7A200T-2FF1156I - 500 I/O Artix-7 FPGA | AMD
XC7A200T-2FF1156I

XC7A200T-2FF1156I - 500 I/O Artix-7 FPGA | AMD

The AMD XC7A200T-2FF1156I is an Artix-7 field-programmable gate array built on 28 nm technology, with 215,360 logic cells, 500 I/O, 16,825 configurable logic blocks, 740 DSP slices, and 13 Mb of block RAM in a 1156-ball FCBGA package. It operates from a 1 V core supply and targets designs requiring substantial parallel processing, high-speed serial links, programmable logic, and dedicated DSP resources. An FPGA is a user-programmable semiconductor containing configurable logic blocks, programmable I/O, memory, dedicated DSP slices, and clock-management resources. Within the semiconductor hierarchy, an FPGA sits above a programmable logic device and supports hardware-level parallelism rather than executing instructions sequentially. The XC7A200T belongs to the Artix-7 family, which combines mid-range programmable logic density with low-power operation for industrial control, communications, instrumentation, embedded vision, and test equipment. The Artix-7 device provides 215,360 logic cells organized into 16,825 CLBs, together with 13 Mb of block RAM and 740 DSP48 resources. Its 500 user I/O support high pin-count interfaces, while integrated transceivers and advanced clocking resources enable high-speed serial connectivity. The -2 speed designation and industrial-temperature suffix identify this configuration for designs requiring the specified performance grade across industrial operating conditions. The 1156-BBGA, FCBGA package is intended for multilayer PCB construction and high-density interconnect. Because the package exposes more than 1,100 contacts, power delivery, via-in-pad construction, ball-map verification, and thermal design are central to successful implementation. AMD package-device pinout files should be used when assigning every power, ground, configuration, clock, and user-I/O connection. Typical Artix-7 applications include industrial Ethernet and programmable control, high-speed data acquisition, digital signal processing, test and measurement, communications infrastructure, embedded vision, and sensor-fusion systems. These systems benefit from parallel pipelines, dedicated DSP resources, and deterministic hardware timing without the power envelope of a larger programmable-logic family. When migrating an existing board, verify the exact package drawing, ball map, power rails, configuration interface, and design-tools support before treating another Artix-7 ordering code as interchangeable. A device with a similar cell count is not automatically a drop-in replacement when its package designation, speed grade, temperature rating, or pin map differs. This page consolidates device specifications, ordering-code differences, package considerations, application guidance, and design notes for engineers evaluating the XC7A200T-2FF1156I as the central programmable-logic device in an industrial or communications design.

RFQ যোগাযোগ
XC7A200T-2FFG1156I - Artix-7 FPGA 215K Logic Cells | AMD
XC7A200T-2FFG1156I

XC7A200T-2FFG1156I - Artix-7 FPGA 215K Logic Cells | AMD

The AMD XC7A200T-2FFG1156I is a member of the Artix-7 FPGA family, offering a balance of high performance, low power, and cost efficiency for a wide range of applications. It features 215,360 logic cells, 500 user I/Os, and 13,455,360 block RAM bits, all in a 1156-ball FCBGA package. Operating from a 0.95V to 1.05V core voltage, this device is designed for systems requiring substantial programmable logic and I/O capability. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the designer after manufacturing, allowing for custom digital logic implementations. FPGAs sit within the broader category of programmable logic devices (PLDs), which are part of the semiconductor industry. They offer flexibility and parallel processing capabilities that are often superior to microprocessors for specific tasks, making them essential in prototyping, signal processing, and hardware acceleration. Key features of the XC7A200T-2FFG1156I include 740 DSP slices for high-speed digital signal processing, 10 clock management tiles (CMTs) with MMCM and PLL for robust clock generation, and support for MicroBlaze soft-core processors. The device also integrates analog-to-digital converters (XADC) for on-chip temperature and voltage monitoring. With a maximum operating frequency of 628 MHz, it delivers high performance for demanding logic designs. Built on 28nm technology, the Artix-7 family provides the highest performance-per-watt fabric in its class. The device supports various I/O standards, including LVCMOS, LVDS, and HSTL, and features high-speed transceivers for serial communication. The 1156-ball FCBGA package offers excellent thermal and electrical characteristics, enabling reliable operation in industrial temperature ranges (-40°C to +100°C). Typical applications include software-defined radio, motor control, medical imaging, and aerospace systems. The combination of logic density, DSP capability, and I/O flexibility makes it suitable for both prototyping and production deployments. Designers can leverage AMD's Vivado Design Suite for comprehensive development support. When designing with this FPGA, careful attention to power supply decoupling and thermal management is essential. The device requires multiple supply rails, and proper sequencing is critical to ensure reliable operation. Additionally, utilizing the on-chip XADC for monitoring can enhance system reliability.

RFQ যোগাযোগ
XC7A200T-2FGG484I - Artix-7 FPGA 215K Logic Cells | AMD
XC7A200T-2FGG484I

XC7A200T-2FGG484I - Artix-7 FPGA 215K Logic Cells | AMD

The AMD XC7A200T-2FGG484I is a high-performance Artix-7 Field Programmable Gate Array (FPGA) from the cost-optimized 28nm family, delivering the highest performance-per-watt fabric in its class. It features 215,360 logic cells, 16825 CLBs, and 13,455,360 bits of block RAM, packaged in a 484-ball Fine-Pitch Ball Grid Array (FBGA) with an industrial temperature range of -40°C to +100°C. This device operates from a nominal 1.0V core supply (0.95V to 1.05V) and supports up to 285 user I/O pins. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the designer after manufacturing, allowing for custom digital logic implementation. FPGAs sit within the broader hierarchy of programmable logic devices, which are part of the semiconductor industry. Unlike fixed-function ASICs, FPGAs offer reconfigurability, making them ideal for prototyping, low-to-mid volume production, and applications requiring field updates. The Artix-7 family specifically targets cost-sensitive, high-volume applications where performance-per-watt and low power are critical. Key features of the XC7A200T-2FGG484I include 740 DSP slices for high-speed digital signal processing, 10 clock management tiles (CMTs) with MMCM and PLL, and support for various configuration interfaces including JTAG, SPI, and BPI. The -2 speed grade offers a balanced performance point, with the -3 being the highest performance and -1/-1LI/-2L optimized for lower static power. The device also integrates analog mixed-signal (AMS) blocks with a 12-bit 1MSPS ADC for on-chip monitoring. Technically, the Artix-7 architecture is built on a 28nm high-k metal gate (HKMG) process, providing a significant leap in logic density and power efficiency over previous generations. The fabric includes 6-input look-up tables (LUTs), dedicated carry chains, and shift register logic, enabling efficient implementation of complex datapaths. The block RAM can be configured in various aspect ratios, and the DSP48E1 slices support 25x18 multiplication with 48-bit accumulation, ideal for filter and FFT implementations. Typical applications include software-defined radio, motor control, medical imaging, and industrial networking. The high I/O count and DSP resources make it suitable for video processing, high-speed data acquisition, and aerospace/defense systems requiring reconfigurable logic. The industrial temperature grade ensures reliable operation in harsh environments. When designing with this device, careful attention must be paid to power supply decoupling, with multiple 1.0V core and 1.8V auxiliary rails requiring proper filtering. Configuration bitstream storage in external SPI flash is recommended for production, and the device supports partial reconfiguration for dynamic logic updates.

RFQ যোগাযোগ
XC7A200T-2SB484I - 215K Artix-7 FPGA | AMD | Industrial
XC7A200T-2SB484I

XC7A200T-2SB484I - 215K Artix-7 FPGA | AMD | Industrial

The AMD XC7A200T-2SB484I is an Artix-7 field-programmable gate array with 215,360 logic cells, 285 I/Os, and 13,455,360 RAM bits in a 484-ball FCBGA package. It combines programmable logic, fixed-point DSP resources, block RAM, high-speed serial transceivers, and general-purpose I/O in a single device. The -2 speed grade targets mid-range performance, while the industrial I temperature designation supports extended-temperature operation. An FPGA is a semiconductor whose digital logic, interconnects, memory, and I/O behavior are configured after manufacture. The Artix-7 family occupies the hierarchy between lower-capacity programmable-logic devices and larger Zynq-class adaptive SoCs. It is intended for designs requiring substantially more parallel processing and storage than a microcontroller while avoiding the cost and complexity of a larger FPGA platform. Configuration logic determines how the internal resources implement a completed digital design. The XC7A200T provides 215,360 logic cells and 13,455,360 RAM bits, making it suitable for parallel image processing, industrial control, communications, instrumentation, and embedded signal-processing systems. The device exposes 285 general-purpose I/O and includes four high-speed serial transceiver channels in the associated 484-ball family information. Its 28 nm process technology supports a balance of performance, capacity, and power efficiency. Exact clock, transceiver, and I/O performance limits must be selected from the appropriate speed-grade and temperature tables in the manufacturer datasheet. The SB484 package is a 19 x 19 mm, 0.80 mm-pitch FBGA with 484 bottom-side terminals. Package construction, power delivery, and exposed thermal behavior are critical in an FPGA design because dynamic power depends on configuration, clock activity, I/O toggling, and resource utilization. Decoupling, controlled rise time, and heat removal should be planned with the same care as high-speed signal routing. The -2 speed grade should not be assumed to satisfy -1, -2L, or -3 timing requirements in an existing design. Typical applications include industrial machine vision, high-speed data acquisition, serial-interface aggregation, programmable logic controllers, test equipment, and embedded control systems. A 215K-cell device can consolidate parallel pipelines and interface logic that would otherwise require several discrete devices. Its block RAM supports packet buffering and data-plane storage, while DSP slices accelerate fixed-point filtering, correlation, and waveform-processing tasks. The available serial transceivers can reduce the need for external line drivers in suitable links. The primary design tradeoff is package migration. XC7A200T ordering codes containing a different package suffix can represent the same base FPGA but not necessarily the same footprint, height, ball map, or power architecture. For a drop-in decision, compare the exact package drawing, pinout file, voltage rails, decoupling requirements, configuration interface, and thermal design rather than relying only on the 484-ball ball count. This product record combines the verified manufacturer-family characteristics, package information, searchable ordering-code references, and design-oriented selection guidance. It also distinguishes true same-footprint options from superficially similar Artix-7 devices, helping engineers evaluate capacity, speed grade, temperature grade, package construction, and board-level compatibility before committing to a replacement or second-source strategy.

RFQ যোগাযোগ
XC7A200T-2SBG484C - 215K Cell Artix-7 FPGA | AMD
XC7A200T-2SBG484C

XC7A200T-2SBG484C - 215K Cell Artix-7 FPGA | AMD

The AMD XC7A200T-2SBG484C is an Artix-7 field-programmable gate array with 215,360 logic cells, 16,825 logic blocks, 13,455,360 RAM bits, and 285 I/O sites in a 484-pin FCBGA package. It uses 28 nm process technology and belongs to the -2 speed grade. The SBG484 package supports dense programmable-logic, digital signal processing, embedded-processing, and high-speed I/O designs where the 484-ball footprint provides substantial routing and interface capacity. An FPGA is a semiconductor whose internal logic, interconnect, and I/O are configured after manufacture. A field-programmable gate array belongs to the programmable-logic hierarchy, combining configurable logic blocks, block RAM, programmable input/output resources, dedicated processing elements, and clocking resources on one device. The XC7A200T family therefore implements complete digital systems in a single integrated circuit rather than relying on a fixed sequence of processor instructions. The Artix-7 architecture provides 215,360 programmable logic cells, 16,825 logic blocks, and 13,455,360 RAM bits. These resources support parallel data paths, digital filters, protocol bridges, control logic, and embedded systems. The device also provides 285 I/O sites and dedicated high-performance I/O resources, allowing a board design to combine multiple interfaces without relying on a large collection of external devices. The XC7A200T-2SBG484C is manufactured on 28 nm technology and is identified with a 1 V core-voltage configuration in the published device listing. Its -2 designation identifies the performance grade. Compared with lower-speed Artix-7 options, the -2 grade favors designs that require greater logic timing margin, although board-level signal integrity, power delivery, and tool constraints still determine whether a design closes timing successfully. Typical uses include industrial control and automation, embedded vision, communications infrastructure, test equipment, consumer peripherals, and high-throughput digital signal processing. The 215,360-cell fabric is particularly suitable for parallel acquisition systems, protocol conversion, image pre-processing, control-plane logic, and designs that combine MicroBlaze processor logic with dedicated hardware pipelines. The most important design consideration is package and power planning. The 484-ball FCBGA requires a dense multilayer PCB, careful power-plane segmentation, and constrained escape routing from the device. Configure the power rails, decoupling network, clocking scheme, and I/O standards for the selected board environment, then validate timing and signal integrity with the complete Vivado design flow. This page combines the exact device identity, package and logic-resource data, drop-in ordering-code comparisons, and practical PCB guidance. It is intended to help engineers confirm that XC7A200T-2SBG484C matches the intended Artix-7 design before investing in board layout, tooling, or procurement.

RFQ যোগাযোগ
XC7A200T-2SBG484I - 215K Logic Cell Artix-7 FPGA | AMD
XC7A200T-2SBG484I

XC7A200T-2SBG484I - 215K Logic Cell Artix-7 FPGA | AMD

The AMD/Xilinx XC7A200T-2SBG484I is an Artix-7 field-programmable gate array with 215,360 logic cells, 13,455,360 RAM bits, and 285 I/O in a 484-FBGA package. The -2 speed grade provides a performance-oriented configuration for designs requiring substantial programmable logic, embedded block RAM, and parallel digital I/O in one highly integrated device. An FPGA is a semiconductor whose digital logic is configured after manufacture. Within the broader hierarchy, the XC7A200T-2SBG484I is a field-programmable gate array, an FPGA, and a programmable-logic semiconductor. Its configurable architecture supports parallel processing, control, interface, data acquisition, and embedded-memory functions without relying on a fixed application-specific instruction set. The Artix-7 family targets compact, cost-sensitive systems that require more capability than small programmable logic devices. The device provides 215,360 logic cells and 13,455,360 RAM bits, creating approximately 1.34 MB of block RAM for buffering, packet storage, video line buffers, or general-purpose on-chip data retention. Its 285 I/O positions support interfaces to external memory, converters, transceivers, displays, sensors, and digital peripherals. The 484-FBGA package also supports high-density board integration while exposing the device through a large ball-grid array rather than perimeter leads. The XC7A200T designation identifies the 200K-class Artix-7 device, while the SBG484 suffix identifies the 484-ball package configuration. The -2 speed designation selects the second performance grade. The industrial I suffix identifies an industrial-temperature-grade ordering option. Exact AC timing limits, configuration-memory organization, differential I/O standards, and power characteristics should be checked against the applicable Artix-7 data sheet and package-specific pinout before a board is released. Typical uses include industrial control and automation, video and image processing, sensor aggregation, communications infrastructure, test-and-measurement equipment, and embedded control systems. The combination of 215,360 logic cells, approximately 1.34 MB of block RAM, and 285 I/O makes the device suitable for designs that need several parallel pipelines operating concurrently or substantial local buffering between external interfaces. Board design requires careful treatment of the 484-ball footprint, power rails, configuration pins, decoupling, and high-speed routing. Use the official package pinout file when assigning every ball, and keep sensitive configuration and clock routing away from noisy switching nodes. Confirm the selected package variant, device speed grade, and industrial-temperature designation against the system’s environmental requirements before releasing the BOM. This product page combines the exact device identity, package information, logic and memory capacity, sourcing context, drop-in comparison options, and practical implementation guidance. It is intended to help engineers confirm fit at the datasheet level while avoiding unsupported claims about timing, compliance, or pin-level connectivity.

RFQ যোগাযোগ
XC7A200T-3FB676E - 215K Logic Cell Artix-7 FPGA | AMD
XC7A200T-3FB676E

XC7A200T-3FB676E - 215K Logic Cell Artix-7 FPGA | AMD

The AMD XC7A200T-3FB676E is an Artix-7 field-programmable gate array with 215,360 logic cells, 16,825 logic blocks, 13,455,360 block RAM bits, and up to 400 user I/O in a 676-ball FBGA package. The -3 designation identifies a -3 speed grade for performance-oriented designs, while the E suffix identifies the extended commercial temperature option. An FPGA is a programmable semiconductor containing configurable logic blocks, block RAM, programmable input/output resources, and dedicated digital signal processing slices. The Artix-7 family balances logic density, embedded memory, signal processing capability, and power efficiency for cost-sensitive systems. Within the FPGA hierarchy, the XC7A200T-3FB676E provides substantially more parallel processing resources than small Artix-7 devices while retaining lower power characteristics than larger scalable device families. Key resources include 215,360 logic cells organized in 16,825 logic blocks, 13,455,360 bits of block RAM, and as many as 400 user I/O. These figures allow parallel video processing, protocol bridging, hardware acceleration, embedded control, and high-speed interface aggregation without using several smaller programmable devices. The device also includes dedicated DSP resources for filtering, transform, and fixed-point arithmetic operations. Artix-7 devices combine programmable logic with dedicated block RAM and DSP slices in a single silicon implementation. Designers can distribute independent pipelines across multiple clock regions, exploit dedicated RAM for buffering and lookup functions, and use the high logic density for wide datapaths. The -3 speed grade is selected when design timing must be evaluated against the faster performance class rather than the -1 or -2 grades. Typical applications include industrial control systems, machine vision, network interface equipment, test and measurement platforms, broadcast infrastructure, embedded signal processing, and high-speed storage or connectivity controllers. The 676-ball package requires careful ball-grid layout planning, multilayer PCB construction, controlled impedance routing, and attention to power delivery across the full device. The most important design consideration is package-level complexity. A 676-ball FBGA requires via-in-pad or via-under-bump access, dense escape routing, multiple power planes, and thermal paths through the PCB rather than a simple two-row perimeter layout. Use the AMD package pinout files and Artix-7 data sheet to assign every ball, power supply, configuration pin, and decoupling connection before layout release. This page consolidates the device family resources, package constraints, speed-grade substitution options, and practical implementation guidance into an engineering-focused reference. It complements the manufacturer data sheet with decision-oriented information for FPGA design, sourcing, and PCB planning teams.

USD $197.64 স্টক অনুপস্থিত
XC7A200T-3FBG484E - 215,360 Logic Cell Artix-7 FPGA | AMD
XC7A200T-3FBG484E

XC7A200T-3FBG484E - 215,360 Logic Cell Artix-7 FPGA | AMD

The AMD XC7A200T-3FBG484E is an Artix-7 field-programmable gate array with 215,360 logic cells, 285 I/Os, a 1,412 MHz clock frequency, and a 0.94 ns combinatorial delay, housed in a 484-ball FCBGA package. It combines programmable logic, embedded memory, DSP resources, clocking, and high-speed serial connectivity in a single adaptive-computing device. An FPGA is a semiconductor whose digital behavior is configured after manufacture. The XC7A200T belongs to the Artix-7 product family, which is positioned between low-cost programmable logic and larger devices requiring greater connectivity or processing performance. Its 215,360 logic cells provide substantial parallel processing capacity, while the 285 I/Os support interfaces to external memory, converters, sensors, displays, and communications equipment. Key device characteristics include 33,650 adaptive logic modules, 12.83 Mbit of embedded memory, 285 I/Os, a 1,412 MHz maximum clock frequency, and 0.94 ns combinatorial delay. The FBG484 package provides 484 ball positions and is intended for compact, high-density PCB layouts. The device also supports integrated high-speed serial transceivers and clock-management resources for demanding communication and signal-processing designs. The -3 suffix identifies the device's performance grade, while the E suffix identifies the commercial temperature option. This distinction matters when comparing it with faster -1 or -2 grade devices and lower-power Artix-7 variants. Because an FPGA design depends on timing closure, the selected speed grade, system clocking, I/O standards, power configuration, and PCB signal integrity must all be reviewed together. Typical applications include industrial control and automation, high-throughput signal processing, network-interface equipment, instrumentation, embedded vision, communications infrastructure, and cost-sensitive designs requiring more parallelism than a microcontroller or fixed-function ASIC can provide. Parallel pipelines can process multiple data streams concurrently, while programmable logic allows product revisions without changing the PCB. A successful implementation requires careful BGA layout, power-plane design, decoupling, clock routing, and I/O-standard planning. Use the AMD Artix-7 package pinout files and UG475 when assigning every ball, and validate the board-level power integrity and signal integrity for the selected interface standards before fabrication. This product page consolidates the confirmed device identity, package and performance details, replacement options, comparison parameters, and practical implementation guidance into an engineering-oriented reference for evaluating an FPGA design before schematic capture and PCB layout.

RFQ যোগাযোগ
XC7A200T-3FBG676E - 215K Logic Cell Artix-7 FPGA | AMD
XC7A200T-3FBG676E

XC7A200T-3FBG676E - 215K Logic Cell Artix-7 FPGA | AMD

AMD XC7A200T-3FBG676E is an Artix-7 field-programmable gate array with 215,360 logic cells, 13,455,360 RAM bits, and 400 user I/O, manufactured using 28 nm technology and housed in a 676-BBGA FCBGA package. The -3 speed grade targets performance-oriented designs requiring the same XC7A200T logic fabric, memory resources, and FBG676 footprint as lower-speed variants. An FPGA is a semiconductor whose internal logic, interconnects, and digital signal-processing resources are configured after manufacture. The Artix-7 family belongs to the broader programmable-logic hierarchy: FPGA, programmable logic device, digital semiconductor, and embedded processing platform. Unlike a fixed-function ASIC, an Artix-7 FPGA allows board designers to implement parallel interfaces, control logic, video pipelines, communications links, and hardware accelerators while retaining reprogrammability. The XC7A200T provides 33,650 adaptive logic modules and 13.46 Mbit of block RAM. Its 400 I/O resources support high pin-count board architectures, while dedicated resources include digital signal processing slices, programmable I/O, clock management, and memory interfaces. These characteristics make the device suitable for embedded vision, industrial control, test equipment, network-interface preprocessing, and high-throughput data-acquisition systems. The device is identified as a 28 nm FPGA with a 1 V core-voltage description and a -3 performance grade. Artix-7 devices are positioned for low-power, cost-sensitive systems compared with larger AMD/Xilinx families, while retaining substantial parallelism and general-purpose I/O. The exact clock, transceiver, I/O-standard, and power characteristics depend on the selected package, bank configuration, speed grade, and design implementation. Typical uses include camera-image preprocessors, programmable logic controllers, protocol bridges, industrial test heads, robotics coordination, and embedded signal-processing platforms. For designs migrating among XC7A200T speed grades, the FBG676 land pattern and device resources remain central, but timing constraints, power characteristics, temperature suitability, and qualification requirements must be checked before substituting a grade. PCB planning should include a heat-spreader solution appropriate for the BGA thermal design, clean power and ground distribution, and controlled-length routing for high-speed interfaces. Use the Artix-7 package pinout files and UG475 when assigning all 676 balls, and run Vivado timing and DRC checks for the exact production MPN before fabrication. This product page combines the XC7A200T resource summary, compatible FBG676 speed-grade alternatives, package-aware comparison data, and practical FPGA design guidance to support early architecture selection and sourcing decisions.

RFQ যোগাযোগ
XC7A200T-3FBG676I - Artix-7 FPGA, 740K Logic Cells | AMD
XC7A200T-3FBG676I

XC7A200T-3FBG676I - Artix-7 FPGA, 740K Logic Cells | AMD

The AMD XC7A200T-3FBG676I is a high-performance Artix-7 family FPGA featuring 740K logic cells, 13.3 Mb of Block RAM, and 740 DSP slices in a 676-ball FCBGA package. It operates with a core voltage of 1.0V and supports I/O standards up to 3.3V. Data verified as of 2026-08-04. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. FPGAs sit between ASICs (application-specific) and microprocessors (fixed instruction set) in the design hierarchy, offering reconfigurability and parallel processing. The Artix-7 family is optimized for high-performance, low-power applications, balancing logic density, DSP capability, and I/O flexibility. Key features include 740K logic cells, 13.3 Mb of Block RAM, 740 DSP slices, and support for PCIe Gen2, Gigabit transceivers, and DDR3 memory interfaces. The -3 speed grade provides the highest performance in the Artix-7 family, with 6.6 Gb/s transceivers and 550 MHz clocking. The industrial temperature grade (-I) supports operation from -40C to +100C, making it suitable for harsh environments. The XC7A200T-3FBG676I is built on 28nm process technology, offering a balance of performance and power efficiency. It includes hardened memory controllers for DDR3, and configurable logic blocks with 6-input LUTs. The device supports partial reconfiguration and has built-in analog-to-digital converter (XADC) for system monitoring. Typical applications include software-defined radio, medical imaging, industrial motor control, and high-performance computing acceleration. The high DSP count and transceiver speed make it ideal for signal processing and high-throughput data paths. When designing with this FPGA, ensure adequate decoupling capacitors on all power rails and follow the recommended power-up sequence. The configuration bitstream can be stored in external SPI flash or loaded via JTAG. Thermal management is critical at high utilization; use the exposed pad and proper airflow. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the AMD datasheet, providing a comprehensive resource for engineers evaluating the XC7A200T-3FBG676I.

USD $390.00 যোগাযোগ
XC7A200T-3SBG484E - 215K Logic Cell Artix-7 FPGA | AMD
XC7A200T-3SBG484E

XC7A200T-3SBG484E - 215K Logic Cell Artix-7 FPGA | AMD

The AMD XC7A200T-3SBG484E is an Artix-7 field-programmable gate array with 215,360 logic cells, 13,455,360 bits of block RAM, and 285 I/O in an SBG484 19 x 19 mm FCBGA package. It combines programmable logic, configurable digital signal processing, distributed memory, block RAM, transceivers, and programmable I/O in one device. The -3 suffix identifies the device speed grade, while the SBG484 suffix identifies the package and pin configuration. An FPGA is a programmable semiconductor in which both the logic architecture and interconnect can be configured after manufacture. Within the product hierarchy, the XC7A200T-3SBG484E is an Artix-7 FPGA, which belongs to the broader 7 Series FPGA family and the semiconductor category. Unlike a fixed-function logic device, an FPGA can implement parallel datapaths, control logic, interfaces, and signal-processing functions that are adapted through HDL code, configuration data, and the associated development toolchain. The 215,360 logic cells provide substantial parallel-processing capacity, while 13,455,360 RAM bits add dedicated on-chip data storage. Its 285 I/O support peripheral connectivity and high pin count in a compact 484-ball FCBGA package. These characteristics make the device suitable when a design needs more parallel logic, memory resources, or I/O than a smaller Artix-7 device can provide. The package is surface mount and requires careful ball-grid-array PCB layout, power distribution, decoupling, and thermal analysis. The -3 speed grade is intended for designs where higher performance is preferred over lower-power operation. The Artix-7 architecture includes programmable logic, DSP48E2 slices, block RAM, mixed-referenced clocking resources, and integrated high-speed I/O. Exact resource counts and configuration details should be confirmed against the AMD Artix-7 data sheet and package pinout files before a design is released for manufacturing. Typical applications include industrial control and automation, robotics, test and measurement, communications infrastructure, video and image processing, embedded systems with parallel data paths, and high-speed data-acquisition equipment. In these systems, the FPGA can consolidate control, interface, and preprocessing functions while reducing the number of discrete components required. Development commonly relies on AMD Vivado or compatible 7 Series design tools. The primary design consideration is power integrity. A 484-ball BGA demands short, properly terminated power planes, local high-frequency decoupling, controlled-return current paths, and clock routing with low sensitivity to noise. Because no exposed thermal pad is identified for this package, board construction should be assessed with the manufacturer's power, thermal, and package guidance. This page combines the device's documented Artix-7 resource figures, package information, application guidance, and pin-compatible family options with practical design considerations for engineers planning an SBG484 FPGA implementation.

RFQ যোগাযোগ
XC7A200T-L1FB484I - 215K Logic Cell Artix-7 FPGA | AMD
XC7A200T-L1FB484I

XC7A200T-L1FB484I - 215K Logic Cell Artix-7 FPGA | AMD

The AMD XC7A200T-L1FB484I is an Artix-7 field-programmable gate array with 215,360 logic cells, 285 I/O, and a 484-ball FCBGA package. It is manufactured on a 28 nm process and uses a nominal 1 V core supply. The device combines programmable logic, block RAM, digital signal processing resources, programmable I/O, and high-speed serial transceivers in one package, making it suitable for embedded processing, industrial control, communications, imaging, and instrumentation systems. A field-programmable gate array is a semiconductor whose digital functions are configured after fabrication. An Artix-7 FPGA belongs to the broader FPGA and CPLD hierarchy, combining configurable logic blocks with fixed hard IP such as block RAM, DSP slices, clock management, and serial transceivers. This architecture lets engineers implement parallel data acquisition, protocol handling, signal filtering, control logic, and hardware acceleration in a single device. The XC7A200T-L1FB484I provides a substantial logic-building capacity of 215,360 cells and 285 general-purpose I/O. Those resources support multi-channel acquisition, high-throughput parallel processing, and control systems requiring numerous external interfaces. Its 484-ball FCBGA package also supports high-density differential and single-ended I/O, although ball-grid routing demands careful via, escape, and return-path planning. The Artix-7 architecture integrates dedicated hardware for common embedded functions. Block RAM supports fixed-latency buffering and storage, DSP slices accelerate multiply-accumulate operations used by digital filters and transforms, and programmable I/O adapts the device to external standards. Its integrated high-speed serial resources can reduce the amount of discrete interface circuitry required in communications and video-processing designs. Typical applications include industrial factory controllers, machine-vision cameras, software-defined radio equipment, test and measurement instruments, network-interface modules, and low-latency embedded signal-processing systems. The 285-I/O count is particularly useful when several buses, sensors, converters, and communication interfaces must share one programmable controller. Design the PCB around the power architecture and high-speed I/O requirements first. Use the manufacturer power-decoupling and configuration guidance, keep sensitive clock and serial-routing paths short, and provide robust power sequencing. A complex FPGA can meet timing only when package escape routing, layer transitions, return paths, and external component placement are treated as part of the signal-integrity design. This page combines device identity, package details, application guidance, comparison criteria, and practical replacement considerations to help engineers evaluate the XC7A200T-L1FB484I beyond a basic catalog description.

RFQ যোগাযোগ
XC7A200T-L1FB676I Artix-7 215K FPGA | AMD
XC7A200T-L1FB676I

XC7A200T-L1FB676I Artix-7 215K FPGA | AMD

AMD XC7A200T-L1FB676I is an Artix-7 field-programmable gate array with 215,360 logic cells, 33,650 adaptive logic modules, 400 user I/O, and 13,140 Kb of block RAM in a 676-ball FCBGA package. The -L1 designation identifies the low-power, -1 speed-grade device variant, while the industrial I suffix identifies the intended temperature class. Its programmable architecture supports parallel logic, block RAM, digital signal processing, and high-speed serial transceiver resources for demanding embedded and communications designs. An FPGA is a semiconductor whose digital functionality is configured after manufacture. A field-programmable gate array belongs to the programmable-logic hierarchy, above simple programmable logic devices and below adaptive computing systems. Artix-7 devices use configurable logic blocks and routing resources to implement processors, control logic, data pipelines, interfaces, and signal-processing functions. This combination makes the XC7A200T-L1FB676I suitable when software-like design flexibility must coexist with deterministic hardware performance. Principal features include 215,360 logic cells and 33,650 adaptive logic modules, providing substantial parallel-processing capacity. The device also includes 740 DSP48E1 slices, 13,140 Kb of block RAM, 400 I/O, and eight GTP channels in the associated FBG676 configuration. These resources support DSP filtering, transform engines, high-speed capture, serial links, embedded processors, and multi-interface control systems. Four MMCM blocks and four PLL blocks support clock generation and phase alignment. The FBG676 package uses a 27 mm by 27 mm footprint and a 0.8 mm ball pitch. Because a device of this density includes many power rails, high-speed transceiver supplies, and hundreds of user I/O, PCB design must provide separate decoupling, solid power distribution, and controlled routing for high-speed differential signals. Although the package is pin-compatible across compatible speed grades, replacing a device requires checking the complete ordering code, supported temperature range, voltage limits, and the specific Artix-7 device map. Typical uses include industrial control, test and measurement, high-speed data acquisition, video and image processing, communications infrastructure, and embedded systems requiring parallel logic plus dedicated DSP resources. The 400-I/O configuration is useful for multi-channel acquisition systems, while the GTP transceivers support high-speed serial connectivity. The XC7A200T-L1FB676I is also suitable for prototyping complete RTL systems before scaling to larger adaptive-computing platforms. Design the power rails, decoupling network, clocking, and transceiver interfaces according to the manufacturer datasheet and package pinout files. Treat the BGA layout as a high-density PCB-design task: controlled escape routing, via arrays, layer-stack planning, and assembly-process checks can determine whether the design assembles reliably. Validate speed-grade-specific timing before treating a nominally pin-compatible device as an equivalent production replacement. This page combines exact device identity, verified resource and package information, same-footprint alternatives, application guidance, and design cautions to support component selection before a PCB design begins.

RFQ যোগাযোগ
XC7A25T-1CPG238C - Artix-7 FPGA, 23K Logic Cells | AMD
XC7A25T-1CPG238C

XC7A25T-1CPG238C - Artix-7 FPGA, 23K Logic Cells | AMD

The AMD XC7A25T-1CPG238C is a 28nm Artix-7 Field Programmable Gate Array (FPGA) delivering 23,360 logic cells with 1,658,880 system gates, housed in a 238-ball Low-Profile Fine-Pitch Ball Grid Array (LFBGA, CPG238) package. It integrates 112 user I/O banks, 1,658,880 system gates, and operates at speed grade -1 with commercial temperature grade (0C to +85C). The device targets high-performance, low-power, cost-sensitive applications where transceiver integration and DSP throughput matter. An FPGA (Field Programmable Gate Array) is a semiconductor integrated circuit whose digital logic, routing, and I/O behavior are defined by a user-supplied configuration bitstream after manufacture. Within the broader programmable-logic taxonomy, FPGAs sit above CPLDs (less complex, non-volatile) and below ASICs (fully custom, non-programmable). The Artix-7 family is positioned for low-power and high DSP/logic throughput at 28nm, complementary to Kintex-7 (price-performance) and Virtex-7 (highest performance) within AMD's 7-series portfolio. Differentiating specifications for the XC7A25T include 1,658,880 system gates, 112 user I/O pins, and a -1 speed grade that balances timing margin versus the -2/-3 grades. The CPG238 package is one of AMD's small-footprint, low-cost BGA options for the Artix-7 family, optimized for the smallest PCB footprint while preserving full Artix-7 fabric features. The commercial temperature grade suits indoor, lab, and consumer environments. Typical applications span industrial motor control and machine vision, software-defined radio (SDR) front ends, low-cost video processing pipelines, embedded digital signal processing, and portable test & measurement instruments. Compared with Spartan-6, Artix-7 roughly doubles logic density per watt and adds higher-rate transceivers, making it a frequent upgrade path. The device is supported by AMD Vivado Design Suite and legacy ISE, with free WebPack editions supporting the XC7A25T device. When designing with the XC7A25T-1CPG238C, ensure the PCB has a BGA fan-out with matched-length impedance-controlled traces for high-speed transceiver signals. Decoupling must follow AMD's UG475 package guidelines, and the configuration mode (SPI flash, JTAG, or SelectMAP) should be finalized before schematic freeze because pin assignments differ per mode. Pricing as of 2026-10-11 reflects current distributor quotes.

RFQ যোগাযোগ
XC7A25T-1CPG238I - Artix-7 FPGA, 23K Logic Cells, 238-BGA | AMD
XC7A25T-1CPG238I

XC7A25T-1CPG238I - Artix-7 FPGA, 23K Logic Cells, 238-BGA | AMD

The AMD (Xilinx) XC7A25T-1CPG238I is an Artix-7 Field Programmable Gate Array (FPGA) IC delivering 23,360 logic cells and 112 user I/Os in a 238-ball CSPBGA (CPG) package. Built on TSMC's 28 nm HKMG process, the Artix-7 family targets cost-sensitive and power-conscious applications requiring high DSP throughput and modest transceiver capability. This specific variant is the -1 speed grade and the I (industrial) temperature grade, supporting operation across -40C to +100C ambient conditions. An FPGA (Field Programmable Gate Array) is a programmable logic device that combines configurable logic blocks, programmable interconnect, and dedicated silicon resources such as Block RAM, DSP slices, and high-speed transceivers. Within the broader taxonomy, FPGAs sit between ASICs (fixed-function, high NRE) and general-purpose microcontrollers; FPGAs offer hardware-level parallelism and are deployed when the design must be re-programmed in the field or when deterministic latency is required. The Artix-7 series specifically bridges mid-range Spartan-6 and high-end Kintex-7 devices, balancing logic density with low static power. Key features of the XC7A25T-1CPG238I include 23,360 logic cells (approximately 3,640 Logic Slices / 29,680 LUTs of fabric), 1,658,880 bits of Block RAM, 45 DSP48A1 slices for high-speed arithmetic, and integrated GTP serial transceivers supporting up to 6.6 Gb/s line rates. The device operates across an extended junction temperature range typical of industrial embedded systems. The 238-ball CSPBGA package uses a 10x10 mm footprint optimized for high-density PCB routing. Architecturally, the Artix-7 uses a 6-input LUT fabric with dedicated carry chains, distributed RAM in slices, and on-chip Block RAM tiles supporting true dual-port access. The 28 nm HKMG process delivers up to 50% lower static power versus the prior 40 nm Spartan-6 generation, making the A25T family attractive for portable, fan-cooled, or sealed industrial enclosures. Typical applications include industrial machine vision, motor control and robotics, medical imaging front-ends, software-defined radio baseband, low-cost serial connectivity bridges, and embedded vision processing pipelines. The device is supported by AMD Vivado Design Suite and the older ISE Design Suite, with free WebPack licenses covering the A25T. When designing with the XC7A25T-1CPG238I, allocate GTP transceiver and Block RAM usage early, as these dedicated resources dictate device utilization and timing closure. The 238-ball CSPBGA requires PCB substrate design with matched impedance for the GTP lanes and proper decoupling; this part uses Xilinx's standard 7-series configuration scheme, which enables drop-in migration between A35T, A50T, and A100T parts in the same package. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ যোগাযোগ
XC7A25T-L1CPG238I - 23,360 Logic Element Artix-7 FPGA | AMD
XC7A25T-L1CPG238I

XC7A25T-L1CPG238I - 23,360 Logic Element Artix-7 FPGA | AMD

The AMD XC7A25T-L1CPG238I is an Artix-7 field-programmable gate array with 23,360 logic elements, 18,250 logic cells, and 150 user I/Os, housed in a 238-CSBGA package. Designed on a 28 nm process, this device combines programmable logic resources, block RAM, digital signal processing resources, and general-purpose I/O in a single integrated circuit. The -1 speed designation targets high-performance operation, while the L1 and industrial-grade ordering codes identify the associated temperature and qualification characteristics. A field-programmable gate array is a semiconductor whose digital logic, memory, and signal-processing functions are configured after manufacture. In the product hierarchy, an FPGA belongs to programmable logic devices and provides a higher level of integration than a network of discrete logic gates. The Artix-7 family is positioned for low-power, low-cost programmable systems requiring substantially more logic capacity than a microcontroller or CPLD. The XC7A25T therefore serves as the central implementation platform for control, interface, data acquisition, communications, and embedded-processing systems. The device offers 23,360 logic elements and 150 user I/Os, providing enough parallel connectivity for moderate-speed interfaces, sensor aggregation, protocol conversion, video control, and industrial control logic. Its 238-CSBGA package supports dense board integration but requires careful escape routing, via-in-pad-compatible assembly techniques, and careful inspection of fine-pitch solder joints. AMD describes the Artix-7 family as combining a performance-per-watt-oriented logic fabric with integrated analog features, AMS blocks, and transceiver capabilities. From a design perspective, the key distinction among XC7A25T variants is the combination of speed grade, temperature range, package, and qualification suffix. The CPG238 package and XC7A25T device family remain constant across several ordering options, but changing the speed or temperature code can affect timing margins and system reliability requirements. Engineers should therefore verify the complete ordering code, package outline, pinout file, and operating-temperature requirements before substituting one member for another. Typical uses include industrial automation, robotics, test equipment, communications equipment, embedded control, audio and video processing, and general-purpose prototyping. Its 150 I/Os are useful for parallel sensor interfaces, display control, memory interfaces, and digital I/O expansion. A 23,360-logic-element device is most appropriate when control logic, multiple interface engines, and modest data-processing blocks must coexist while keeping the implementation on a single programmable device. Board planning should follow AMD’s package pinout and PCB design guidance. Place decoupling capacitors close to supply pins, route high-speed interfaces with controlled impedance, provide adequate ground-plane continuity, and verify the assembly process for the 238-CSBGA land pattern. Although the L1 ordering code supports an extended temperature positioning, the selected board enclosure, airflow, and local component ratings still determine the final system thermal margin. This page combines the exact device identity, package characteristics, drop-in candidate analysis, comparison parameters, and practical implementation guidance in a format that supports engineering selection rather than simple catalog lookup. It also distinguishes true same-footprint candidates from larger Virtex-7 devices that are not substitutes for the Artix-7 design.

RFQ যোগাযোগ