উপশ্রেণী

📁 ADC/DAC 3,600+ পণ্যগুলি 📁 অ্যামপ্লিফায়ার IC 3,200+ পণ্যগুলি 📁 Analog Computation 0 পণ্যগুলি 📁 অডিও কোডেক 18 পণ্যগুলি 📁 অডিও IC 2 পণ্যগুলি 📁 ক্লক ও টাইমিং 970+ পণ্যগুলি 📁 Comparator ICs 1 পণ্যগুলি 📁 DSP 1,300+ পণ্যগুলি 📁 ডেটা অ্যাকুইজিশন IC 2 পণ্যগুলি 📁 ডিজিটাল পটেনশিওমিটার 4 পণ্যগুলি 📁 ডিসপ্লে ড্রাইভার ও কন্ট্রোলার 1 পণ্যগুলি 📁 FPGA ও CPLD 8,400+ পণ্যগুলি 📁 ইন্টারফেস IC 5,100+ পণ্যগুলি 📁 LED ড্রাইভার 1 পণ্যগুলি 📁 লজিক IC 720+ পণ্যগুলি 📁 মেমরি IC 870+ পণ্যগুলি 📁 মাইক্রোকন্ট্রোলার 22,000+ পণ্যগুলি 📁 মাইক্রোপ্রসেসর 4 পণ্যগুলি 📁 মোটর ড্রাইভার 1 পণ্যগুলি 📁 অন্যান্য 0 পণ্যগুলি 📁 সেন্সর এবং ডিটেক্টর ইন্টারফেস 1 পণ্যগুলি 📁 বিশেষায়িত IC 15 পণ্যগুলি 📁 ভিডিও IC 14 পণ্যগুলি

পণ্য (46,000+)

XC7K160T-2FB676I - 162240-Cell -2 Kintex-7 FPGA | AMD
XC7K160T-2FB676I

XC7K160T-2FB676I - 162240-Cell -2 Kintex-7 FPGA | AMD

The AMD XC7K160T-2FB676I is a Kintex-7 field-programmable gate array with 162240 programmable logic cells, 400 I/O, and a 676-pin FCBGA package. It is built on 28 nm FPGA technology, operates from a 1 V core supply, and carries the -2 performance speed grade for demanding programmable-logic, communications, signal-processing, and embedded-systems designs. A field-programmable gate array is a reconfigurable digital semiconductor that combines programmable logic blocks, block RAM, programmable input/output resources, dedicated processing resources, and programmable interconnect. Within the semiconductor hierarchy, an FPGA sits above fixed-function logic and provides hardware customization through configuration bitstreams. This makes an FPGA useful when a design needs parallel processing, high I/O density, deterministic digital interfaces, or field-updatable behavior. The XC7K160T belongs to the Kintex-7 family and is identified by the -2 speed grade. Its 162240-cell architecture provides substantial logic capacity, while 400 I/O support interfaces to external memory, transceivers, converters, network controllers, and test equipment. The 1 V core supply and 28 nm process generation place the device between general-purpose programmable logic and larger, higher-cost Kintex designs that require more resources or greater I/O bandwidth. The 676-pin FCBGA package supports dense board layouts and high pin availability, but it also demands careful ball assignment, multilayer PCB construction, and controlled power delivery. Unlike a small serial FPGA, this device supports a broad mix of parallel and serial connectivity. Its industrial-temperature suffix identifies it for applications requiring operation across an extended environmental range, while the -2 grade provides a defined performance class within the Kintex-7 portfolio. Typical uses include industrial control systems, high-speed data acquisition, video and image processing, communications infrastructure, test and measurement equipment, and embedded signal-processing platforms. A video-processing design can use parallel logic for pixel pipelines and block RAM for line buffering. A communications design can partition serial transceivers, clocks, protocol logic, and supervisory functions across the programmable fabric while retaining the flexibility to update the bitstream during product maintenance. PCB design should begin with the manufacturer’s package pinout and power requirements rather than treating all 676 balls as interchangeable. Separate clean and noisy supplies, place decoupling capacitors close to their associated supply balls, provide adequate via arrays beneath the BGA, and preserve high-speed return paths. Configuration storage, programming access, and a recovery strategy must also be planned because an FPGA depends on a valid bitstream before its configured logic becomes operational. This product page combines the Kintex-7 device identity, package information, parameter-level comparisons, replacement guidance, and engineering design notes. It helps engineers distinguish speed-grade and package-suffix changes before committing to a 676-ball board design, while directing procurement requests through the Request a Quote form on this page.

RFQ যোগাযোগ
XC7K160T-2FBG484C - 162K-Cell Kintex-7 FPGA | AMD Xilinx
XC7K160T-2FBG484C

XC7K160T-2FBG484C - 162K-Cell Kintex-7 FPGA | AMD Xilinx

AMD Xilinx XC7K160T-2FBG484C is a Kintex-7 field-programmable gate array with 162,240 programmable logic cells, a 1 V core supply, and 185 I/O sites in a 484-ball lidless FCBGA package. Built on 28 nm FPGA technology, the device combines programmable logic, block RAM, DSP resources, high-speed serial transceivers, and clock-management resources on one monolithic device. The -2 speed grade is intended for designs requiring a balance of performance and power efficiency. A field-programmable gate array, or FPGA, is a digital semiconductor whose interconnect and logic configuration are defined after manufacture. FPGA device families form part of the broader programmable-logic hierarchy alongside complex programmable logic devices. By integrating configurable parallel and serial processing resources into one package, an FPGA can accelerate parallel algorithms, implement communication protocols, perform signal processing, consolidate multiple discrete functions, and support field upgrades without changing the printed circuit board. The XC7K160T-2FBG484C provides 162,240 logic cells and 185 I/O in a 484-BBGA FCBGA package. Its 28 nm process supports substantially higher logic density than older FPGA technologies while retaining programmable serial connectivity and dedicated hardware for clock generation and DSP operations. The exact number of transceivers, block RAM blocks, DSP slices, programmable I/O standards, and operating-temperature limits should be selected from the manufacturer ordering guide and Kintex-7 data sheet for the selected configuration. The -2 suffix identifies the device speed grade. A lower-numbered speed grade generally trades maximum timing performance for potentially lower power characteristics, while a higher-numbered grade offers additional timing margin. Because FPGA timing depends on the implemented logic path, clock architecture, I/O standard, speed grade, and operating conditions, a replacement must preserve the device identity, package ball map, power architecture, configuration compatibility, and required performance grade. Typical applications for this Kintex-7 device include industrial control and automation, high-throughput data acquisition, network interface equipment, communications infrastructure, video and image processing, and embedded signal-processing systems. The 185 available I/O sites allow the design to connect external memory, transceivers, clocks, sensors, and data-conversion components, while its programmable logic resources support parallel pipelines that would otherwise require multiple complex devices. PCB design should preserve the 484-ball FCBGA escape routing, power distribution, decoupling, and thermal-management requirements of the Kintex-7 package. Confirm ball assignments against the manufacturer package files before assigning pins, and validate high-speed interfaces with the appropriate board-level constraints. Because the package contains many power and ground balls, uninterrupted ground-plane continuity and uniform thermal spreading are central to reliable operation. This product page consolidates the exact device identity, package information, source-backed operating attributes, pin-compatible alternatives, comparison parameters, and practical design considerations into one engineering reference. It also distinguishes true same-ball-map replacements from related Kintex-7 devices that require a different package or may not preserve configuration, timing, temperature, or qualification requirements.

RFQ যোগাযোগ
XC7K160T-2FBG484I - 162K-Cell Kintex-7 FPGA | AMD
XC7K160T-2FBG484I

XC7K160T-2FBG484I - 162K-Cell Kintex-7 FPGA | AMD

The AMD XC7K160T-2FBG484I is a Kintex-7 field-programmable gate array built on 28 nm technology, with 162,240 logic cells, 285 I/O, and a 484-ball FCBGA package. The device uses a 1 V core supply and the -2 speed grade is intended for high-performance designs requiring substantial parallel logic, DSP, and memory resources in a single package. A field-programmable gate array is a programmable semiconductor containing configurable logic blocks, programmable interconnect, block RAM, and dedicated digital signal processing resources. Within the FPGA hierarchy, the Kintex-7 family occupies the performance range between lower-cost Virtex-7 devices and ultra-high-end Virtex-7 devices, making the XC7K160T suitable for demanding communications, industrial control, instrumentation, and signal-processing systems. Principal device attributes include 162,240 logic cells, a 28 nm process node, 285 I/O, and 484-ball lead-free FCBGA packaging. The -2 suffix identifies the performance grade, while the I suffix identifies the industrial temperature grade. The FCBGA construction provides dense interconnect access for high-pin-count designs, although it requires careful via-in-pad and thermal-via layout to achieve reliable electrical and thermal performance. The Kintex-7 architecture combines programmable logic with DSP slices, block RAM, and high-speed transceiver resources on devices that include them. This balance allows designers to consolidate control logic, parallel data paths, packet-processing functions, and digital filtering into one programmable device instead of combining an FPGA with several discrete companion ICs. The 484-ball package also requires an assembly process capable of handling fine-pitch, large-area BGA interconnects. Typical uses include industrial automation and motion control, high-speed data acquisition, telecommunications line-card processing, radar and test instrumentation, image-processing pipelines, and low-latency protocol bridging. The 162,240-cell device provides more logic capacity than many smaller Kintex-7 members, making it appropriate for multi-channel architectures that must be reconfigured for different operating modes without redesigning the printed circuit board. A critical design consideration is the power and thermal budget. Although the nominal core voltage is 1 V, utilization-dependent dynamic power, adjacent I/O activity, and the dense BGA solder mask design all influence board temperature. Use the AMD power estimator and the device data sheet for resource-specific figures, provide multiple decoupling positions, and validate the assembled board across temperature and I/O activity conditions. This page adds application-specific engineering context, a parameter comparison among same-footprint Kintex-7 options, and practical layout guidance that is not consolidated in a single manufacturer datasheet table.

RFQ যোগাযোগ
XC7K160T-2FBG676C - 162,240-Cell Kintex-7 FPGA | AMD
XC7K160T-2FBG676C

XC7K160T-2FBG676C - 162,240-Cell Kintex-7 FPGA | AMD

The AMD XC7K160T-2FBG676C is a Kintex-7 field-programmable gate array with 162,240 logic cells, 400 user I/O, and 11,700 Kb of block RAM in a 676-BBGA FCBGA package. The -2 speed grade provides a performance tier between the -3 and -1 devices, while the FBG676 package supports high-density, high-speed board designs requiring extensive parallel connectivity. A Kintex-7 FPGA is a programmable digital logic device in the FPGA and CPLD hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic, block RAM, programmable input/output, clocking, and signal-processing resources on one semiconductor. The XC7K160T belongs to the Kintex-7 family, which combines substantial general-purpose logic with high-speed serial connectivity and digital signal-processing capability for demanding embedded systems. Principal device attributes include 162,240 logic cells, 400 user I/O, and 11,700 Kb of block RAM. The package is identified as FBG676, a 676-ball FCBGA, and the -2 designation identifies the device speed grade. The available product documentation also identifies MMCM and PLL resources, supporting clock generation, phase shifting, jitter management, and multiple clock domains in designs that require deterministic clock distribution. The device's 400 I/O resources make it suitable for parallel interfaces, high-speed memory interfaces, data acquisition, control systems, and external network connectivity. Its block RAM supports buffering, packet storage, lookup tables, and firmware or parameter retention. Logic resources can implement processors, protocol controllers, arithmetic pipelines, and custom accelerators, while dedicated clocking resources help maintain timing margin across multiple clock domains. Typical applications include industrial automation, test and measurement, high-speed data acquisition, video and image processing, communications infrastructure, and embedded signal-processing systems. Kintex-7 FPGAs are especially appropriate where design flexibility, parallel I/O density, and deterministic programmable logic are more important than minimizing a fixed device's power or cost. Board design requires careful BGA fanout, layer transitions, controlled-impedance routing, power-plane distribution, and decoupling across the many supply rails. Because a 676-ball FCBGA presents demanding routing and assembly constraints, validate escape routing, thermal performance, and high-speed channel design before releasing the PCB layout to fabrication.

RFQ যোগাযোগ
XC7K160T-2FF676C - 162K Kintex-7 FPGA | AMD/Xilinx
XC7K160T-2FF676C

XC7K160T-2FF676C - 162K Kintex-7 FPGA | AMD/Xilinx

The AMD/Xilinx XC7K160T-2FF676C is a Kintex-7 field-programmable gate array built on 28 nm FPGA technology, with 162,240 logic cells, 400 user inputs/outputs, a 1 V operating core voltage, and a 676-pin FCBGA package. It combines programmable logic, configurable I/O, embedded memory, DSP processing resources, dedicated clocking, and high-speed serial transceivers in one device. An FPGA is a semiconductor whose digital circuit is defined after manufacture by loading a configuration bitstream. Within the broader semiconductor hierarchy, an FPGA is a programmable-logic IC and a field-programmable gate array. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed for protocol bridging, parallel processing, signal acquisition, control logic, or other system functions, while its 676-ball package provides a high-density connection interface to external memory, converters, transceivers, and clock sources. The Kintex-7 family combines programmable logic with dedicated hardware for DSP and serial connectivity. The XC7K160T-2FF676C provides 162,240 logic cells and 400 user I/O in an FCBGA-676 package. Its 28 nm process technology supports a 1 V core operating voltage, while the 676-contact package supports dense board-level interconnect. The device is identified by the XC7K160T family, -2 performance suffix, and the FF676C package and commercial-grade ordering suffix. Because this is an FPGA rather than a fixed-function converter or processor, its implemented performance depends on the configuration, logic mapping, memory organization, clocking scheme, and external circuitry. The -2 ordering code denotes a specific performance grade within the Kintex-7 ordering system. Designers should use the device documentation and the pinout associated with the exact order code when assigning power rails, clock inputs, configuration pins, high-speed transceiver pins, and general-purpose I/O. Typical applications include high-speed interface aggregation, network equipment, industrial control and test systems, signal-processing platforms, embedded vision, communications infrastructure, and FPGA-based accelerators. The large logic capacity is useful when a design combines parallel datapaths with serial links, while the 400 user I/O allows external memory and multiple peripheral interfaces to be connected without a separate programmable-logic device. PCB design requires close attention to the FCBGA ball map, multilayer escape routing, power-plane integrity, decoupling, thermal management, and high-speed clock and transceiver layout. The 676-pin package does not match the available package-diagram library, so use the official package drawing and pin table for land-pattern and routing work. Confirm the exact suffix interpretation and temperature grade against the manufacturer ordering guide before release. This product record combines device specifications, package details, practical design guidance, and same-family replacement comparisons. It also distinguishes directly relevant package and speed-grade options from alternatives that require a different footprint, helping engineers narrow a replacement search without assuming that every Kintex-7 ordering code is interchangeable.

RFQ যোগাযোগ
XC7K160T-2FF676I - 162K Kintex-7 FPGA | AMD Xilinx
XC7K160T-2FF676I

XC7K160T-2FF676I - 162K Kintex-7 FPGA | AMD Xilinx

AMD Xilinx XC7K160T-2FF676I is a Kintex-7 field-programmable gate array with 162,240 logic cells, 250 user I/Os, a maximum clock frequency of 710 MHz, and a 676-ball FCBGA package. The -2 speed grade targets designs requiring a balance of performance, power consumption, and design flexibility across industrial, communications, instrumentation, and embedded processing systems. A field-programmable gate array is a semiconductor whose digital logic can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable I/O, block RAM, DSP arithmetic resources, clock-management circuits, and high-speed serial transceivers. This architecture allows parallel processing, hardware acceleration, protocol bridging, and deterministic control functions to be consolidated into one device rather than implemented across multiple fixed-function chips. The XC7K160T belongs to the Kintex-7 family and provides 162,240 logic cells with a stated maximum operating frequency of 710 MHz. Its 250 I/Os support connection to external memory, high-speed interfaces, control signals, clocks, and data converters. The 676-ball FCBGA package also exposes the device's high-speed I/O and configuration resources, while its fine-pitch ball pitch makes careful PCB layout, thermal management, and assembly process control essential. The -2 suffix identifies the device speed grade. Compared with a -1 part, the -2 grade provides a higher performance level; a -3 grade is faster still. Core-voltage information associated with this device lists an operating range of 970 mV to 1.03 V. Because Kintex-7 devices contain configurable power-management features, actual rail requirements and current depend on the selected logic, memory interfaces, transceivers, I/O standards, clocking, and utilization reported by the implementation tools. Typical uses include industrial control, communications infrastructure, test and measurement, high-speed data acquisition, signal processing, network equipment, and embedded systems that benefit from parallel programmable logic. The large logic capacity supports parallel datapaths, protocol state machines, packet processing, and custom accelerator pipelines. Integrated block RAM and DSP resources can reduce reliance on external components when the design maps efficiently onto the FPGA architecture. When laying out a board around this FCBGA device, follow the manufacturer pinout, power-plane, decoupling, and high-speed-interface guidance exactly. Provide continuous supply planes, place bypass capacitors at the relevant power balls, route clock and differential pairs with controlled impedance, and confirm the assembly process supports the package geometry. Check worst-case junction temperature, configured transceivers, I/O standards, and core utilization before approving the power budget. This product record combines the exact manufacturer-family parameters, package information, speed-grade references, drop-in candidates, and engineering guidance needed to evaluate a board-level migration. It emphasizes where an alternate speed grade changes performance, where package suffixes require procurement review, and which design constraints remain unchanged when the FPGA itself is replaced.

RFQ যোগাযোগ
XC7K160T-2FFG676C 400-I/O Kintex-7 FPGA | AMD
XC7K160T-2FFG676C

XC7K160T-2FFG676C 400-I/O Kintex-7 FPGA | AMD

The AMD XC7K160T-2FFG676C is a Kintex-7 field-programmable gate array built on a 28 nm process, with 162,240 logic cells, 400 user I/Os and a maximum operating frequency of 470.37 MHz. The device is offered in a 676-ball FCBGA package and targets designs requiring a strong balance of programmable logic, DSP capacity, memory interfaces and high-speed connectivity. A field-programmable gate array is a semiconductor whose digital logic, signal processing and interconnect resources are configured after manufacture. In the product hierarchy, an FPGA is a programmable-logic device and a semiconductor. The Kintex-7 family occupies the middle of AMD's 7-series portfolio, combining higher logic density than smaller devices with less implementation cost than the largest FPGAs. This makes the XC7K160T useful for control, acquisition, signal-processing and communications systems that exceed the capacity of small programmable devices. The XC7K160T provides 400 user I/Os and 162,240 logic cells in the FFG676 package. Its stated core voltage range is 970 mV to 1.03 V, while the -2 designation identifies the device speed grade. The Kintex-7 architecture also includes DSP resources and clock-management capabilities such as MMCM and PLL blocks. These resources support parallel data processing, clock-domain management and high-throughput interfaces in systems that must implement substantial digital logic on one device. AMD describes the Kintex-7 family as optimized for price-performance and implemented using 28 nm technology. The family supports mainstream connectivity requirements such as PCIe Gen3 and 10 Gigabit Ethernet. High-speed transceivers, memory controllers and programmable logic can therefore share one package, reducing board count and simplifying synchronization compared with a design assembled from separate processors, FPGAs and interface devices. Typical applications include wireless baseband equipment, industrial video processing, high-speed data acquisition, network interface equipment and test systems. In a communications design, the FPGA can implement packet processing, filtering, protocol conversion and clock recovery. In an acquisition system, it can combine parallel ADC capture, digital filtering, buffering and a high-speed host interface within one programmable fabric. The FFG676 package requires a dense, multilayer PCB layout with many power and ground balls, short high-speed escape routes and carefully controlled impedance. Power sequencing, decoupling and thermal management should follow AMD's Kintex-7 design guidance. Configuration storage, clocking, transceiver reference circuitry and auxiliary supply requirements must also be planned before schematic capture. This product page combines package and resource details with drop-in alternatives, parameter comparisons, sourcing guidance and practical PCB-design considerations. It is intended to help engineers confirm footprint compatibility, evaluate speed-grade or temperature-grade alternatives and plan a robust Kintex-7 implementation.

RFQ যোগাযোগ
XC7K160T-2FFG676I - Kintex-7 FPGA 162K Logic Cells | AMD
XC7K160T-2FFG676I

XC7K160T-2FFG676I - Kintex-7 FPGA 162K Logic Cells | AMD

The AMD XC7K160T-2FFG676I is a Kintex-7 family Field Programmable Gate Array (FPGA) delivering 162,240 logic cells, 400 user I/Os, and 11,980,800 bits of block RAM in a 676-ball FCBGA package. It operates over the industrial temperature range of -40°C to +100°C and is lead-free / RoHS compliant. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the designer after manufacturing, enabling custom digital logic implementations without the cost and lead time of ASIC development. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), which range from simple CPLDs to high-capacity FPGAs, and are essential in applications requiring parallel processing, rapid prototyping, and field-updatable hardware. Key features of the XC7K160T-2FFG676I include the -2 speed grade, which balances performance and power consumption, and the FFG676 package that supports easy migration between Kintex-7 family members. The device provides 400 user I/Os, 10 clock management tiles (CMTs) with MMCM and PLL, and 600 DSP slices for high-throughput signal processing. Its 36 Kb block RAM blocks total 11,980,800 bits, enabling substantial on-chip data storage. Architecturally, the Kintex-7 series is built on a 28 nm high-k metal gate (HKMG) process, offering a strong balance of performance, power, and cost. The -2 speed grade provides a middle ground between the higher-performance -3 and the lower-power -1L/-2L variants. The device supports a wide range of I/O standards, including LVCMOS, LVDS, and HSTL, and includes integrated PCIe, Gigabit transceivers, and DDR3/DDR4 memory interfaces. Typical applications include high-performance signal processing, software-defined radio, medical imaging, aerospace and defense systems, and wired communications. The 400 I/Os and 162K logic cells make it suitable for complex digital designs requiring substantial parallel processing and connectivity. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The FCBGA package requires a well-designed PCB with adequate thermal vias and a solid ground plane to ensure reliable operation at industrial temperatures.

RFQ যোগাযোগ
XC7K160T-3FBG484E - 162K Logic Cell Kintex-7 FPGA | AMD
XC7K160T-3FBG484E

XC7K160T-3FBG484E - 162K Logic Cell Kintex-7 FPGA | AMD

The AMD XC7K160T-3FBG484E is a Kintex-7 field-programmable gate array with 162,240 logic cells, 11,700 Kb of block RAM, 600 DSP slices, and 285 I/O sites, supplied in a 484-ball FCBGA package. It is manufactured on a 28 nm process and targets the -3 performance grade with an extended commercial temperature range rated from 0 °C to 100 °C at the junction. The 23 mm × 23 mm package supports high-speed parallel processing, DSP acceleration, memory-intensive logic, and programmable I/O in a single device. A Kintex-7 FPGA belongs to the 7 Series FPGA hierarchy and combines configurable logic blocks, programmable input/output blocks, block RAM, digital signal processing slices, high-speed transceivers, clock-management resources, and dedicated configuration memory. Unlike a fixed-function processor or application-specific controller, the Kintex-7 allows parallel datapaths, custom interfaces, and hardware acceleration to be implemented through programmable logic, while the integrated MMCM and PLL resources support clock generation and jitter control. Key resources for the XC7K160T-3FBG484E include 162,240 logic cells, 11,700 Kb of block RAM, 600 DSP slices, and 285 I/O. The -3 speed grade provides the highest Kintex-7 performance class identified in the family documentation, making it appropriate for timing-critical datapaths. Its extended temperature designation covers industrial-temperature applications where the junction can reach 100 °C, subject to the device's power and thermal limits. The 484-FCBGA package provides a high-density interconnect for high-performance designs requiring many external connections. Because the device uses a large, fine-pitch BGA, PCB construction demands careful via-in-pad or via-under-bump geometry, controlled solder-paste deposition, X-ray inspection, and adequate thermal relief around the package. The AMD Kintex-7 data sheet and package documentation should be used directly for the land pattern, pin states, configuration requirements, and power-decoupling arrangement. Typical applications include high-throughput signal processing, digital communications, industrial control, high-speed data acquisition, network infrastructure, video and image processing, and prototyping systems that benefit from parallel programmable logic. The 600 DSP slices allow multiply-accumulate-heavy filters and transforms to execute in parallel, while 11,700 Kb of block RAM supports buffering, packet storage, lookup functions, and wide data paths. When planning the PCB, place decoupling capacitors close to the supply pins, preserve the manufacturer's high-speed routing guidance, and treat thermal management as part of the layout rather than an afterthought. Configuration pins, clock inputs, and high-speed transceiver or I/O interfaces each have dedicated constraints that must be checked against the selected design tools and board stack-up. This page consolidates device resource counts, package details, temperature information, drop-in device variants, and engineering design guidance into a single purchasing and evaluation reference. Use the AMD Kintex-7 data sheet for complete electrical tables, pin definitions, configuration memory requirements, and design-tool-specific implementation details.

RFQ যোগাযোগ
XC7K160T-3FBG676E - 162K-Cell Kintex-7 FPGA | AMD
XC7K160T-3FBG676E

XC7K160T-3FBG676E - 162K-Cell Kintex-7 FPGA | AMD

The AMD XC7K160T-3FBG676E is a Kintex-7 field-programmable gate array with 162,240 logic cells, 400 I/O resources, and 11.98 Mb of block RAM, manufactured on 28 nm CMOS technology and packaged in a 676-pin FCBGA. It is designed for high-performance programmable logic, communications, signal processing, industrial control, and data-acquisition systems. The -3 designation identifies the highest-performance Kintex-7 speed grade, while the E suffix identifies the extended-temperature option. A Kintex-7 FPGA is a semiconductor device whose digital logic, memory blocks, programmable input/output resources, and signal-processing blocks are configured after manufacture. Within the FPGA hierarchy, it combines configurable logic, block RAM, DSP resources, high-speed serial transceivers, clock-management resources, and advanced input/output structures. This integration allows one package to implement parallel processing, control logic, data acquisition, interface bridging, and protocol handling without requiring numerous discrete programmable devices. The XC7K160T-3FBG676E provides 162,240 programmable logic cells distributed across 12,675 configurable logic blocks. Its 400 I/O resources support high pin counts for parallel buses, memory interfaces, control signals, and multi-gigabit I/O. Internal block RAM provides 11,980,800 bits of storage for packet buffering, data alignment, lookup tables, and temporary computation. The device also incorporates DSP resources for filtering, multiply-accumulate, and fixed-point signal-processing workloads. The -3 speed grade is specified for maximum performance within the Kintex-7 family, and the device operates with a 1.0 V core supply according to the product listing. AMD documents the Kintex-7 family in DS182, while the FBG676 package-specific details, pinout, power behavior, and decoupling requirements are defined by the package and device documentation. Configuration, clocking, and power sequencing must follow the applicable AMD configuration and design guidelines. Typical uses include industrial Ethernet and other high-speed communication equipment, radar and signal-processing front ends, test and measurement systems, high-resolution data converters, video infrastructure, and control platforms requiring deterministic parallel processing. The 400 I/O resources are particularly useful where wide data buses coexist with multiple high-speed links and substantial on-device buffering. PCB design requires careful treatment of the FCBGA escape routing, power planes, decoupling, clock integrity, and configuration pins. Use the AMD package pinout files and the manufacturer package-design guidance when assigning every ball, power rail, configuration signal, and reference voltage. Differential pairs should use the prescribed impedance and length-matching rules, while power delivery should minimize loop area between supply and ground structures. This page organizes the device’s principal specifications, sourcing information, family alternatives, application guidance, and design considerations into one engineering-focused reference. Use the official Kintex-7 data sheet and package pinout files as the controlling documents for final schematic, layout, timing, and thermal validation.

RFQ যোগাযোগ
XC7K160T-3FFG676E - Kintex-7 FPGA 162K Cells | AMD
XC7K160T-3FFG676E

XC7K160T-3FFG676E - Kintex-7 FPGA 162K Cells | AMD

The AMD XC7K160T-3FFG676E is a high-performance Kintex®-7 Field Programmable Gate Array (FPGA) from the Kintex-7 family, fabricated on a 28nm process technology. It features 162,240 logic cells, 400 user I/O pins, and 11,980,800 bits of block RAM, all housed in a 676-ball FCBGA (27x27mm) package. This device is the -3 speed grade, the highest performance option in the Kintex-7 lineup, offering maximum clock frequencies and throughput for demanding applications. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. Unlike fixed-function ASICs, FPGAs contain a fabric of programmable logic blocks, interconnects, and I/O elements that can be reprogrammed in the field, making them ideal for prototyping, high-performance computing, and applications requiring hardware flexibility. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), which also includes CPLDs, and are a key component in the semiconductor industry for accelerating workloads that benefit from parallel processing. Key features of the XC7K160T-3FFG676E include 400 user I/O pins supporting various I/O standards, 11,980,800 bits of block RAM for on-chip data storage, and 400 DSP slices for high-speed digital signal processing. The -3 speed grade provides the highest performance, with internal clock speeds exceeding 600 MHz. The device also supports PCIe® Gen2, Gigabit Ethernet, and other high-speed serial transceivers, making it suitable for a wide range of communication and processing tasks. Technically, the Kintex-7 family is optimized for best price-performance, offering a 2X improvement over the previous generation. The 28nm high-k metal gate (HKMG) process technology enables low power consumption while maintaining high logic density. The device includes advanced clock management tiles (CMTs) with PLLs and MMCMs for precise clock generation, and supports partial reconfiguration for dynamic logic updates. Typical applications include software-defined radio (SDR), medical imaging, aerospace and defense systems, and high-performance computing. The XC7K160T-3FFG676E is particularly well-suited for applications requiring high-speed data processing, such as radar signal processing and video/image processing, where its combination of logic density, DSP capability, and high-speed transceivers provides a competitive advantage. When designing with this device, ensure proper power supply decoupling on VCCINT, VCCAUX, and VCCO rails, and follow AMD's recommended PCB layout guidelines for high-speed signals. The device requires a 1.0V core voltage (VCCINT) and supports various I/O bank voltages (VCCO) depending on the interface standard.

RFQ যোগাযোগ
XC7K160T-L2FBG484E - Low-Power Kintex-7 FPGA | AMD
XC7K160T-L2FBG484E

XC7K160T-L2FBG484E - Low-Power Kintex-7 FPGA | AMD

The AMD XC7K160T-L2FBG484E is a Kintex-7 field-programmable gate array with 162,240 logic cells, 11,700 Kb of block RAM, and 285 I/O, supplied in a 484-pin FCBGA package measuring 23 mm by 23 mm. Its -2L speed grade targets lower maximum static power and can support lower core voltages than the standard -2 grade, while the -3 grade provides the highest Kintex-7 performance. The XC7K160T combines programmable logic, DSP, block RAM, high-speed serial transceivers, and general-purpose I/O in a single device for demanding embedded systems. A Kintex-7 FPGA belongs to the programmable-logic hierarchy, where an FPGA is a semiconductor containing configurable logic blocks, memory, and routing resources. These resources form parallel processing, interface, and signal-processing circuits after the device is programmed. Compared with application-specific standard logic, an FPGA supports field upgrades, hardware parallelism, and product differentiation without requiring a new ASIC fabrication run. Kintex-7 devices occupy the middle of the AMD Xilinx product range between lower-cost Artix-7 and higher-density Virtex-7 families. The principal device resources include 162,240 logic cells and 11,700 Kb of block RAM. The 285 available I/O support connections to memory, converters, network transceivers, clocks, and external control logic. The -2L operating designation identifies the lower-power family variant rather than the standard -2 device. This makes the part suitable for systems that require substantial parallel processing while balancing performance, thermal design, and power consumption across industrial, communications, instrumentation, and defense-oriented equipment. The FPGA architecture combines programmable logic with dedicated DSP and memory resources, enabling fixed- or floating-point pipelines, digital filtering, modulation, protocol handling, and high-throughput data movement. Its large 484-contact FCBGA package also creates a demanding PCB-layout environment: high-speed differential pairs, multiple supply rails, exposed thermal requirements, and numerous decoupling connections must be planned together. Designers should treat power distribution, via current capacity, return-path continuity, and thermal dissipation as part of the FPGA design rather than as after-the-fact PCB details. Typical uses include telecommunications line cards, industrial vision, radar and signal-processing front ends, high-speed test equipment, network-interface controllers, and embedded accelerator platforms. In each case, the 162,240 logic cells and 11,700 Kb of block RAM allow substantial parallel workloads to be consolidated into one programmable device. The 23 mm by 23 mm FCBGA-484 footprint supports dense, high-pin-count implementations but demands advanced board assembly capability and careful thermal validation. For a new board, verify the selected device speed grade, industrial temperature grade, and package variant against the required clocking, transceiver, and I/O standards. Because the -2L grade emphasizes reduced power characteristics, evaluate both static and dynamic power at the intended operating voltage and temperature. Use the AMD Kintex-7 datasheet and package pinout for power rails, configuration pins, package balls, and decoupling requirements before releasing the PCB. This product page consolidates the key device identity, resource, package, comparison, and sourcing information into an engineer-oriented reference. It also identifies same-footprint Kintex-7 alternatives and organizes replacement choices by speed grade, temperature grade, and application constraints rather than presenting every differently packaged FPGA as a drop-in equivalent.

RFQ যোগাযোগ
XC7K160T-L2FBG484I - Low-Power Kintex-7 FPGA | AMD
XC7K160T-L2FBG484I

XC7K160T-L2FBG484I - Low-Power Kintex-7 FPGA | AMD

The AMD XC7K160T-L2FBG484I is a low-power Kintex-7 field-programmable gate array built on a 28 nm process and supplied in a 484-ball FCBGA package. The device provides 285 I/O, approximately 162,240 logic cells, and 11,808,000 flip-flops. Its -2L speed designation identifies a lower-power variant that can operate at lower core voltages than the standard -2 grade. The -2L family is screened for reduced maximum static power, making the XC7K160T-L2FBG484I suitable for systems that need substantial programmable logic without operating continuously at the power level of a standard -2 device. A Kintex-7 FPGA is a programmable semiconductor in the FPGA and CPLD hierarchy, combining configurable logic, block RAM, programmable input/output resources, digital signal processing resources, and high-speed serial transceivers. Within the broader semiconductor and programmable-logic categories, a Kintex-7 device bridges general-purpose FPGA implementation and higher-density signal-processing designs. Its architecture supports parallel logic, embedded memory, clock management, and serial connectivity within one configurable device. The principal benefit of the -2L grade is its lower static and dynamic power profile relative to the standard -2 speed grade. The industrial-temperature suffix I supports operation from -40°C to +100°C, while the 484-ball FCBGA provides 285 I/O and extensive interconnect resources. These characteristics support industrial control, communications infrastructure, test equipment, embedded signal processing, and high-speed data acquisition systems where logic density, I/O availability, and power behavior matter more than the maximum timing performance of the -3 grade. The Kintex-7 architecture is implemented on a 28 nm process and belongs to the Xilinx 7-series device family. The -2L grade is specifically screened for lower maximum static power and can use lower core voltage than -2 devices, reducing energy per processed bit in designs with substantial dynamic activity. Designers should still evaluate board-level power, configured resource utilization, I/O standards, clocking, and thermal rise during system implementation. Typical uses include industrial Ethernet and control systems, network interface equipment, high-speed serial processing, telemetry, radar signal paths, digital instrumentation, and embedded communications platforms. The 285 available I/O support parallel interfaces and multiple voltage domains, while programmable logic and block memory allow protocol handling, data buffering, filtering, and state-machine control to be consolidated into one FPGA. PCB implementation requires careful attention to the 484-ball land pattern, power decoupling, clock integrity, and high-speed routing. Follow the AMD package, schematic, and configuration guidance for ball assignments and supported I/O standards. Validate pin assignments, differential routing, supply sequencing, and thermal performance in the target enclosure before releasing production hardware. This page combines device-level electrical limits, package constraints, practical integration guidance, and same-footprint Kintex-7 alternatives. It also provides search-focused pinout, datasheet, replacement, and design-reference information for engineers evaluating the XC7K160T-L2FBG484I against other -1, -2, -2L, and -3 speed and temperature configurations.

RFQ যোগাযোগ
XC7K160T-L2FBG676E - 162K Kintex-7 FPGA | AMD Xilinx
XC7K160T-L2FBG676E

XC7K160T-L2FBG676E - 162K Kintex-7 FPGA | AMD Xilinx

The AMD Xilinx XC7K160T-L2FBG676E is a Kintex-7 field-programmable gate array with 162,240 logic cells, a 28 nm CMOS process, and a 676-ball flip-chip BGA package. It combines programmable logic resources with 11,700 Kb of block RAM, high-speed serial transceivers, memory interfaces, and clock-management resources in a device intended for demanding embedded, communications, and signal-processing systems. The -2 speed grade targets a balance between operating performance and power efficiency, while the E suffix identifies the specified environmental option. A Kintex-7 FPGA belongs to the broader FPGA and programmable-logic hierarchy, which sits above CPLDs and fixed-function logic within semiconductor and embedded processing systems. Unlike an application-specific integrated circuit, an FPGA combines millions of programmable gates, configurable digital interfaces, and dedicated hardware blocks into one reconfigurable device. This allows engineers to implement parallel processing, protocol bridging, data acquisition, control logic, and high-speed connectivity while retaining flexibility for design revisions. The XC7K160T-L2FBG676E provides 162,240 logic cells and 400 I/O in the FBG676 package. Its reported maximum clock frequency is 710 MHz, and the core-voltage listing spans 970 mV to 1.03 V. Dedicated block RAM, DSP resources, transceivers, clock-management circuitry, and selectable I/O standards make the device suitable for parallel processing pipelines, network interfaces, industrial controls, test equipment, and embedded video systems. The extended temperature designation supports use across industrial temperature conditions when the associated system requirements are met. The -2 speed designation is important because FPGA timing closure depends on the selected speed grade, tool version, device configuration, I/O standard, routing, and environmental conditions. Reported clock and voltage figures therefore describe device capabilities rather than guaranteed system-level performance. Designers should use the AMD Vivado design suite for implementation and timing analysis, then verify the complete interface against the Kintex-7 data sheet and the selected board configuration. The large BGA package also demands careful power delivery, decoupling, thermal management, and high-speed layout discipline. Typical applications include industrial automation, serial-network interface bridging, high-speed data acquisition, communications infrastructure, control systems, and embedded signal processing. In these systems, the FPGA can execute parallel algorithms, implement custom interfaces, and coordinate data movement between external memory, network transceivers, sensors, and host processors. The -2 grade is appropriate when a design requires more timing margin than a lower-speed option without moving to the -3 grade, particularly in industrial environments where sustained thermal performance is important. Power and layout planning should begin before schematic capture. Separate clean supplies and sensitive analog rails where the design requires them, place decoupling capacitors at the appropriate power balls, provide low-impedance ground planes, and follow the manufacturer’s ball-map and power-architecture guidance. A 676-ball FCBGA also requires a mechanically suitable substrate or interposer and assembly process capable of handling its pad geometry and thermal requirements. This page combines the verified package, logic-cell, process, voltage, clock, and I/O characteristics with application guidance, design checks, and same-package Kintex-7 alternatives. The comparison focuses on package, speed grade, temperature grade, and device resources so engineers can identify a likely replacement while still completing a full pin, timing, power, and lifecycle review before redesign approval.

RFQ যোগাযোগ
XC7K160T-L2FBG676I - 162,240-LC Kintex-7 FPGA | AMD
XC7K160T-L2FBG676I

XC7K160T-L2FBG676I - 162,240-LC Kintex-7 FPGA | AMD

The AMD/Xilinx XC7K160T-L2FBG676I is a Kintex-7 field-programmable gate array with 162,240 logic cells, 12,675 configurable logic blocks, 11,980,800 RAM bits, and 400 I/O in a 676-ball FBG package. The L2 speed grade targets lower maximum static power and can operate at lower core voltages than the standard -2 grade. The device combines programmable logic, block RAM, digital signal processing resources, programmable I/O, and high-speed serial connectivity in one 27 mm × 27 mm package. A Kintex-7 FPGA belongs to the Xilinx 7 Series FPGA family, which combines FPGA logic with configurable digital signal processing, programmable I/O, embedded memory, high-speed transceivers, and dedicated clocking resources. This device is designed for systems requiring substantial parallel processing and flexible hardware architecture, allowing functions such as protocol handling, data acquisition, signal processing, packet switching, and interface bridging to be implemented in programmable logic rather than fixed-function silicon. The XC7K160T-L2FBG676I provides 162,240 logic cells organized into 12,675 CLBs, together with 11,700 Kb of block RAM. Its 400 user I/O support communication with external converters, memories, transceivers, and digital peripherals. The FBG676 package uses a 676-ball grid array with a 1.00 mm terminal pitch, supporting high-density routing in a 27 mm × 27 mm body. The industrial temperature suffix I identifies the appropriate temperature grade for industrial operating conditions. The L2 grade is differentiated from the ordinary -2 grade by its lower-power characterization. According to AMD's Kintex-7 family documentation, -2L devices are screened for lower maximum static power and can operate at lower core voltages for lower dynamic power than -2 devices. This makes the L2 option relevant to power-conscious industrial, communications, instrumentation, and embedded-processing systems where thermal design, battery capacity, or system cooling constrains FPGA power consumption. Typical applications include industrial data acquisition, test and measurement, telecommunications line cards, networking equipment, embedded vision, control systems, and high-throughput digital signal processing. The large logic and memory resources allow parallel channels, wide data paths, and buffering to be consolidated in one programmable device. The 400 I/O also make the device practical for systems combining multiple external interfaces with substantial on-chip processing. PCB design should follow the AMD package pinout, power-decoupling, configuration, clocking, and thermal guidance. Because a 676-ball BGA is difficult to inspect and rework, adequate solder-mask and paste-defined land patterns, X-ray inspection, and assembly-process control are important. Power, ground, configuration pins, and high-speed I/O must be assigned with the device's published package and schematic guidance before layout is released. This page organizes the device's architecture, package constraints, application guidance, drop-in alternatives, and design considerations into an engineering-focused reference. It also highlights the distinction between the low-power L2 grade and standard -2 or -1 Kintex-7 options, helping designers evaluate speed-grade, power, and production-sourcing trade-offs before committing a PCB or system architecture.

RFQ যোগাযোগ
XC7K160T-L2FFG676E - 162K Logic Cell Kintex-7 FPGA | AMD
XC7K160T-L2FFG676E

XC7K160T-L2FFG676E - 162K Logic Cell Kintex-7 FPGA | AMD

AMD XC7K160T-L2FFG676E is a Kintex-7 field-programmable gate array with 162,240 logic cells, 400 I/O, 11,700 Kb of block RAM, and a 676-ball FCBGA package. Built on 28 nm CMOS technology, the -2L speed grade targets lower maximum static power and lower core voltage than the standard -2 grade. The FPGA is designed for high-performance parallel processing, programmable logic, signal processing, networking, and embedded systems requiring substantial logic density and high I/O availability. Its FFG676 package provides 676 package balls and supports both industrial and extended-temperature ordering options across the XC7K160T family. A Kintex-7 FPGA is a configurable digital semiconductor whose interconnect, logic blocks, block RAM, DSP resources, and I/O can be programmed after manufacture. Within the FPGA hierarchy, it belongs to the 7 Series programmable-logic family and provides substantially more parallel processing capacity than fixed-function logic devices. This makes the XC7K160T suitable for systems that combine high-throughput data paths with custom control logic, parallel algorithms, or hardware-assisted acceleration. The XC7K160T family provides 162,240 logic cells and approximately 12,675 configurable logic blocks. Its 11,700 Kb of block RAM supports packet buffering, data-width conversion, local storage, and digital filtering. The FFG676 configuration exposes 400 user I/O, enabling dense connections to DDR memory, transceivers, clocks, data converters, and parallel peripherals. The -2L designation identifies a lower-power speed grade within the Kintex-7 portfolio. The 28 nm architecture combines programmable logic with dedicated DSP blocks and selectable block RAM for high-throughput signal-processing designs. Its 400 I/O make external memory and high-pin-count interface implementation practical on a single device. Designers must nevertheless assign banks carefully to compatible supply voltages and observe the package-specific power, decoupling, and ball-map requirements described by AMD documentation. Typical applications include industrial control and automation, networking and packet processing, test and measurement, high-speed data acquisition, communications infrastructure, embedded vision, and signal-processing subsystems. The large logic capacity supports parallel lanes and buffering, while the -2L grade is appropriate when power consumption is more important than the maximum performance of the -3 grade. Place decoupling capacitors close to the appropriate supply balls, keep high-speed routing short, and separate sensitive clock and reference connections from demanding switching nodes. Before board release, verify the selected FPGA part, package ball map, memory topology, bank voltages, configuration interface, thermal conditions, and I/O standards against the AMD package and design documentation. This product page combines verified device specifications, family-level replacement analysis, and practical FPGA design guidance. It also distinguishes exact FFG676 drop-in options from other Kintex-7 package variants so engineers can distinguish electrical and thermal ordering changes from changes requiring a PCB redesign.

RFQ যোগাযোগ
XC7K160T-L2FFG676I Low-Power Kintex-7 FPGA | AMD
XC7K160T-L2FFG676I

XC7K160T-L2FFG676I Low-Power Kintex-7 FPGA | AMD

The AMD XC7K160T-L2FFG676I is a low-power Kintex-7 field-programmable gate array with 162,240 logic cells, 400 I/O, and 11,980,800 RAM bits, packaged in a 676-pin FCBGA. It is manufactured on 28 nm process technology and operates with a listed core-voltage range of 930 mV to 970 mV. A field-programmable gate array is a semiconductor whose digital logic, interconnect, memory, and signal-processing blocks are configured after manufacture. FPGA architecture falls within programmable logic devices and combines configurable logic blocks, block RAM, DSP resources, programmable I/O, clock-management circuits, and dedicated configuration logic. This combination allows one physical device to implement control logic, high-speed interfaces, signal processing, or complete embedded systems. The XC7K160T-L2FFG676I belongs to the Kintex-7 family and is identified by the -L2 low-power speed grade. The family provides 162,240 logic cells organized into 12,675 CLBs, 11,980,800 RAM bits, 400 user I/O, and clock-management resources including MMCM and PLL blocks. The 28 nm implementation supports a favorable balance between logic density, performance, and power for communications, industrial, instrumentation, and embedded-processing systems. Its 676-ball FCBGA package provides a high-density interconnect for power, ground, configuration, clock, and user I/O. Because this is a complex BGA device, PCB layout must control ball-to-ball escape routing, power-plane geometry, via structures, and thermal spreading. The listed operating junction-temperature range is -40°C to 100°C for the related XC7K160T-2FFG676I ordering code, so system-level thermal verification remains essential. Typical applications include high-speed serial-interface aggregation, industrial data acquisition, test-and-measurement control, embedded vision, communications infrastructure, and high-throughput DSP processing. The large logic and RAM resources allow parallel data paths and buffering, while the 400 I/O support external memory, high-speed transceivers, clocks, and control peripherals. For a new design, confirm the complete power architecture, decoupling network, configuration interface, and FPGA package ball map in the AMD Kintex-7 documentation. Treat the -L2 suffix as a meaningful power and performance selection rather than a generic ordering variation. PCB changes should not be attempted unless the selected replacement has an explicitly verified, identical ball map and power architecture. This product record combines the device's key logic, memory, I/O, process, package, and power-grade characteristics with replacement guidance and practical implementation considerations. It is intended to help engineers distinguish speed-grade, temperature-grade, package, and low-power differences before committing a board to a specific FPGA ordering code.

RFQ যোগাযোগ
XC7K325T-1FB676C - Kintex-7 FPGA, 326080 Cells | AMD
XC7K325T-1FB676C

XC7K325T-1FB676C - Kintex-7 FPGA, 326080 Cells | AMD

The AMD XC7K325T-1FB676C is a Kintex-7 field-programmable gate array in a 676-ball FCBGA package, combining 326080 logic cells with 400 user I/O in the -1 speed grade. It is designed for high-throughput programmable logic, parallel processing, high-speed serial links, DSP-accelerated signal processing, and embedded control systems. A field-programmable gate array, or FPGA, is a programmable semiconductor whose digital logic blocks, I/O, memory, and dedicated processing resources are configured after manufacture. The FPGA hierarchy places this device in the Kintex-7 family, within the broader categories of programmable logic devices, semiconductors, and digital integrated circuits. Unlike fixed-function logic, an FPGA allows interface, protocol, and parallel-algorithm changes to be implemented through bitstream updates rather than PCB redesign. The XC7K325T part combines 326080 logic cells with 400 I/O in one 676-BBGA FCBGA package. The -1 ordering code identifies a performance grade within the Kintex-7 speed-grade range. Programmable logic resources support parallel datapaths, while dedicated resources commonly address high-speed transceiver, DSP, and block RAM requirements in communications, industrial control, scientific instrumentation, and defense-oriented electronics. Kintex-7 devices combine configurable logic with high-speed serial transceivers and programmable logic resources for demanding interface designs. The -1 grade targets general-purpose performance-oriented designs rather than the highest -3 speed grade. Because the exact timing, resource counts by type, voltage rails, and transceiver configuration depend on the specific Kintex-7 data sheet and device variant, use the manufacturer tables for final implementation decisions. Typical deployments include 10G and 40G Ethernet interfaces, high-speed data acquisition, radar and electronic-warfare signal paths, industrial protocol bridges, video-processing pipelines, and test equipment. The large device and fine-pitch BGA package also make power delivery, decoupling, thermal management, and signal integrity central to successful implementation. For a new board, reproduce the manufacturer reference power and decoupling layout, keep high-speed nets short and continuously referenced, and validate every power rail under maximum transceiver activity. For an existing design, compare the complete ball map, voltage rails, configuration pins, and transceiver assignments before treating another 676-ball device as a replacement. This page consolidates package, resource, sourcing, and engineering information for the XC7K325T-1FB676C, including drop-in candidate comparisons and design guidance that help shorten component-selection and hardware-integration work.

RFQ যোগাযোগ
XC7K325T-1FB676I - 326,080 LE Kintex-7 FPGA | AMD | Industrial
XC7K325T-1FB676I

XC7K325T-1FB676I - 326,080 LE Kintex-7 FPGA | AMD | Industrial

The AMD XC7K325T-1FB676I is a Kintex-7 field-programmable gate array with 326,080 logic elements, 16,404,480 bits of block RAM, and 400 user I/O in a 676-ball FCBGA package. The -1 speed grade is intended for performance-oriented designs, while the industrial suffix identifies the extended-temperature configuration. This combination makes the device suitable for demanding signal-processing, control, communications, and industrial systems that require substantial programmable logic in a single package. A field-programmable gate array is a semiconductor whose logic, memory, and I/O resources can be configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic device and a semiconductor. Compared with a fixed-function ASIC, an FPGA combines software-programmable hardware with faster design iteration, while it generally consumes more power and costs more per unit at high production volumes. The Kintex-7 family sits between lower-cost FPGA families and higher-end devices, balancing logic density, memory, programmable I/O, and signal-processing capability. The XC7K325T-1FB676I provides 25,475 configurable logic blocks, 16,404,480 bits of block RAM, and 400 I/O according to the product listing. Its programmable I/O supports flexible interface implementation, while dedicated resources such as MMCM and PLL blocks facilitate clock generation and phase management. The large logic and memory resources allow parallel datapaths, high-throughput filtering, protocol handling, and embedded control functions to be consolidated within one device. The -1 device designation identifies its performance class within the Kintex-7 portfolio. The industrial suffix denotes an industrial-temperature-grade configuration, although exact junction, ambient, and recommended operating limits should be confirmed in the AMD/Xilinx datasheet and package data. Package resources include numerous power and ground connections to support high-speed, high-current switching designs. The 27 mm by 27 mm FCBGA package also requires careful escape routing, controlled power delivery, and a multilayer PCB layout. Typical applications include industrial automation controllers, high-speed data acquisition, communications infrastructure, test-and-measurement equipment, signal processing, and embedded vision systems. A designer can use the large logic fabric for parallel algorithms, block RAM for buffering or packet storage, and programmable I/O for external converters, transceivers, clocks, and high-speed memory interfaces. The architecture supports concurrent real-time processing without relying on multiple discrete programmable devices. The primary design consideration is package complexity. A 676-ball FCBGA requires BGA assembly capability, via-in-pad or buried-via escape structures, controlled-impedance routing, and multiple power rails. Before layout, use the AMD Kintex-7 package pinout files and UG475 to verify every power, ground, configuration, clock, and user-I/O ball for the exact device suffix. This page organizes the confirmed device identity, package, capacity, search-demand documentation queries, same-family drop-in candidates, and practical selection guidance. Exact electrical limits, configuration requirements, memory performance, and package-specific design rules should be taken directly from the current AMD/Xilinx datasheet and package documentation.

RFQ যোগাযোগ
XC7K325T-1FB900C - 326,080-LE Kintex-7 FPGA | AMD
XC7K325T-1FB900C

XC7K325T-1FB900C - 326,080-LE Kintex-7 FPGA | AMD

AMD XC7K325T-1FB900C is a Kintex-7 field-programmable gate array with 326,080 logic cells, 900-ball flip-chip BGA packaging, and a -1 speed grade. The device is manufactured on a 28 nm process and supports mainstream connectivity including PCIe Gen3 and 10 Gigabit Ethernet. Its 900-BBGA package provides a high-density interface for designs requiring substantial parallel logic, memory connectivity, programmable I/O, and high-speed serial links. A field-programmable gate array is a semiconductor whose digital logic, interconnects, and peripheral blocks are configured after fabrication. The Kintex-7 family sits between AMD's lower-density programmable-logic products and larger Zynq and Virtex devices. By combining configurable logic with dedicated DSP, memory, and high-speed I/O resources, an FPGA can accelerate parallel processing, signal processing, control, networking, and data-transfer functions without requiring a custom ASIC. The XC7K325T designation identifies a high-capacity Kintex-7 member. The suffix sequence identifies the -1 performance grade, the FB900 package, and the C temperature designation. The 900-ball FCBGA package supports dense routing to banks of programmable I/O and power-management resources. This package is intended primarily for advanced boards with careful ball assignment, multilayer routing, and controlled power delivery. The Kintex-7 architecture combines programmable logic with high-speed serial transceivers, dedicated DSP slices, block RAM, and general-purpose I/O. This resource mix allows designers to implement multiple data paths in parallel while retaining specialized hardware for serial interfaces and arithmetic-heavy processing. AMD describes the family as delivering strong price/performance/watt characteristics at the 28 nm process node. Typical applications include high-throughput data acquisition, industrial control, test and measurement, network packet processing, video and image pipelines, communications infrastructure, and embedded signal-processing systems. The 326,080 logic cells make the device appropriate for designs where parallel logic density is more valuable than minimizing package size or cost. PCIe Gen3 and 10 Gigabit Ethernet support also align it with modern data-plane and host-interface designs. Hardware implementation requires careful attention to decoupling, power sequencing, clocking, and high-speed signal integrity. Use the pinout files and device documentation to assign power balls, connect all required supplies, and route each high-speed differential pair as a controlled-impedance network. Differential pairs should remain continuous, with matching reference planes and minimal stubs to preserve signal quality. This product page combines the exact ordering information, 326,080-logic-cell capacity, 900-BBGA package, 28 nm process generation, supported connectivity standards, drop-in family alternatives, and practical PCB implementation guidance. It is designed to accelerate component selection, schematic review, PCB planning, and replacement assessment for engineers working with high-capacity Kintex-7 systems.

RFQ যোগাযোগ
XC7K325T-1FB900I - 326K LE Kintex-7 FPGA | AMD
XC7K325T-1FB900I

XC7K325T-1FB900I - 326K LE Kintex-7 FPGA | AMD

AMD XC7K325T-1FB900I is a Kintex-7 field-programmable gate array with 326,080 logic elements, 50,950 adaptive logic modules, 500 I/O sites, and a 900-ball FCBGA package. The device is identified as the -1 speed grade and industrial-temperature variant. It combines programmable logic, DSP processing, block RAM, and programmable I/O in one high-density semiconductor package. A field-programmable gate array, or FPGA, is a digital integrated circuit whose logic, interconnect, and I/O functions are configured after manufacture. An FPGA sits within the broader programmable-logic hierarchy and provides hardware-level parallelism for workloads that may be inefficient on a general-purpose processor. Kintex-7 devices extend the AMD Xilinx FPGA portfolio for communications, industrial control, test equipment, signal processing, and embedded systems requiring deterministic parallel logic. The XC7K325T-1FB900I provides 326,080 logic elements and 50,950 adaptive logic modules, creating substantial configurable logic capacity. Its 500 I/O sites support interfaces to external memory, data converters, network transceivers, clocks, and control peripherals. The listed 900-BBGA FCBGA package also provides a 2.54 mm terminal pitch and a stated 31 mm package size, making high-density routing and multilayer PCB design essential. The -1 designation identifies the device performance grade within the Kintex-7 family. The industrial suffix I identifies the intended temperature class. Reported operating information includes a -40 °C lower temperature and a 100 °C upper temperature, while the core supply information includes 1.03 V and a 970 mV value. Exact timing, current, memory capacity, and power figures should be selected from the manufacturer tables corresponding to the installed device and configuration. Typical uses include high-throughput data acquisition, programmable interface consolidation, industrial automation, communications infrastructure, and embedded signal-processing systems. The large logic and I/O resources allow multiple independent pipelines to operate in parallel, while block RAM and DSP resources support buffering and fixed-point processing without relying on external processors for every operation. PCB design must account for the 900-ball package, power distribution across multiple rails, and the demanding high-speed routing required by FPGA I/O. Use the manufacturer package-pinout files and reference design guidance to assign balls, implement complete power planes, and route sensitive clocks, memory interfaces, and differential pairs with controlled impedance and return paths. This page organizes the verified device identity, package information, temperature and speed-grade details, engineering alternatives, and design guidance in one place. It also identifies comparison points that matter when deciding whether a different Kintex-7 speed grade or temperature grade can replace the target without changing the PCB footprint.

RFQ যোগাযোগ
XC7K325T-1FBG676C - Kintex-7 FPGA 326K Logic Cells | AMD
XC7K325T-1FBG676C

XC7K325T-1FBG676C - Kintex-7 FPGA 326K Logic Cells | AMD

The AMD XC7K325T-1FBG676C is a high-performance Kintex-7 Field Programmable Gate Array (FPGA) built on 28nm technology, offering 326,080 logic cells and 400 user I/Os in a 676-ball FCBGA package. It operates from a 1.0V core voltage and supports mainstream standards like PCIe, making it a cost-effective choice for high-bandwidth applications. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. FPGAs sit between ASICs (application-specific) and microprocessors (fixed-function) in the design hierarchy, offering reconfigurability and parallel processing. The Kintex-7 family is optimized for price/performance/watt, balancing logic density, DSP capability, and transceiver performance for mid-range to high-end applications. Key features include 400 I/O pins, 16,404,480 bits of block RAM, and 326,080 logic cells. The device supports multiple speed grades (-1, -2, -3) and includes hardened blocks for PCIe, Gigabit Ethernet, and DDR3 memory controllers. The 676-ball FCBGA package provides excellent thermal and electrical performance for high-speed designs. Architecturally, the Kintex-7 uses a 6-input look-up table (LUT) fabric with dedicated carry chains, DSP48E1 slices for multiply-accumulate operations, and configurable block RAM. The device integrates Clock Management Tiles (CMTs) with MMCM and PLL for precise clock generation. The 28nm HPL process enables low static power while maintaining high performance. Typical applications include software-defined radio, high-performance computing, video processing, and aerospace/defense systems. The device's high DSP ratio and transceiver capabilities make it ideal for signal processing and data acquisition. Its support for PCIe Gen2 and DDR3 simplifies system integration. When designing with this FPGA, careful attention to power supply decoupling and thermal management is essential. The core voltage must be maintained within 0.97V to 1.03V, and the FCBGA package requires a proper thermal solution for high utilization designs.

RFQ যোগাযোগ
XC7K325T-1FBG676I - 326K Logic Kintex-7 FPGA | AMD/Xilinx
XC7K325T-1FBG676I

XC7K325T-1FBG676I - 326K Logic Kintex-7 FPGA | AMD/Xilinx

AMD/Xilinx XC7K325T-1FBG676I is a Kintex-7 field-programmable gate array with 326,080 logic cells, a -1 speed grade, and a 676-ball FCBGA package. It operates across an industrial temperature range of -40°C to +100°C. The device is built on 28 nm FPGA technology and supports high-speed programmable-logic, DSP, serial connectivity, and processor-assisted designs. A Kintex-7 FPGA is a semiconductor in the FPGA > programmable logic > digital IC hierarchy. Unlike a fixed-function logic device, an FPGA combines configurable logic blocks, programmable I/O, block RAM, DSP resources, dedicated clocking, and high-speed serial transceivers. This combination allows designers to implement parallel processing, protocol bridges, signal processing, control logic, and interface adaptation in one integrated device. The XC7K325T family provides 326,080 logic cells and a high ratio of DSP resources relative to logic capacity. Its -1 speed grade targets designs requiring predictable general-purpose FPGA performance, while the FBG676 package supports 676 electrical connections for power, ground, configuration, clocking, user I/O, and high-speed interfaces. AMD identifies Kintex-7 as a 28 nm family with support for mainstream PCIe Gen3 and 10 Gigabit Ethernet designs. Within the Kintex-7 architecture, programmable logic handles control paths and protocol state machines, while dedicated DSP slices efficiently perform multiply, accumulate, filtering, and fixed-point operations. Block RAM supplies deterministic on-chip data storage, and dedicated serial transceivers reduce the external component count for high-speed links. Configuration and programming are managed through the FPGA toolchain, and timing closure depends on device speed grade, I/O standards, clocking, and routing congestion. Typical uses include industrial control, test and measurement, video and image processing, communications infrastructure, networking equipment, embedded signal processing, and prototyping systems. The FBG676 package is particularly appropriate when a design needs many I/O, substantial parallel-processing capacity, and a modest number of high-speed serial links in a single FPGA package. PCB implementation requires careful power planning because the 676-ball package contains multiple supply and ground balls. Follow AMD's package pinout files and DS182 Kintex-7 data sheet when assigning power rails, decoupling, configuration pins, clock inputs, and high-speed transceiver connections. Validate differential pairs, impedance-controlled routes, thermal performance, and configuration behavior before releasing the layout for fabrication. This product overview combines device identity, package information, temperature limits, directly related same-footprint Kintex-7 options, and implementation guidance. It helps engineers distinguish speed-grade and temperature-grade changes from genuine package changes before modifying an existing PCB or FPGA build.

RFQ যোগাযোগ
XC7K325T-1FBG900C - 326K-Logic Kintex-7 FPGA | AMD
XC7K325T-1FBG900C

XC7K325T-1FBG900C - 326K-Logic Kintex-7 FPGA | AMD

The AMD XC7K325T-1FBG900C is a Kintex-7 field-programmable gate array built on a 28 nm HKMG process, providing 326,080 logic cells, 500 user I/Os, and operation up to 400 MHz in a 900-ball FCBGA package. The device combines 840 DSP48E1 slices, 16,020 Kb of block RAM, and 16 GTX transceivers capable of 12.5 Gb/s per lane. A field-programmable gate array is a semiconductor whose logic, memory, signal-processing, and I/O resources can be configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a form of digital semiconductor. The Kintex-7 family balances performance, power, connectivity, and cost for communications, industrial, scientific, and embedded systems. The XC7K325T-1FBG900C provides 25,475 configurable logic blocks, 840 DSP48E1 slices, and 16,020 Kb of block RAM. Its 500 I/Os support broad external connectivity, while 16 GTX transceivers enable high-speed serial links. The -1 speed grade, commercial temperature designation, and 0.970 V to 1.030 V core-voltage range distinguish this ordering code within the Kintex-7 portfolio. Kintex-7 devices integrate programmable logic with DSP processing, block RAM, high-speed transceivers, and memory-interface resources. The GTX transceivers support protocols including PCI Express Gen3 and 10 Gigabit Ethernet, allowing a single FPGA to implement high-bandwidth links alongside parallel processing. The large 900-ball FCBGA footprint supports dense board-level integration but requires careful power delivery, escape routing, and thermal design. Typical uses include network switches, industrial vision, high-throughput data acquisition, test and measurement, radio-frequency processing, and embedded control systems with substantial parallel logic. The 16 high-speed lanes also make the device suitable for endpoint, aggregation, storage, and signal-processing designs where serial connectivity and DSP capacity are both valuable. Place stable decoupling close to the core, transceiver, and I/O supply pins, and follow the AMD package-pinout files and UG475 when assigning balls and designing escape routing. Because the 900-ball FCBGA is a complex, high-pin-count package, layer count, via current, thermal vias, and ball-grid escape strategy directly affect signal integrity, assembly yield, and reliability. This product page combines the device specifications, package constraints, order-code distinctions, and engineering guidance needed to plan a Kintex-7 design. It also identifies same-package alternatives and clarifies the speed-grade and temperature choices that require design-level verification before replacement.

RFQ যোগাযোগ