ইন্টিগ্রেটেড সার্কিট

DSPIC33EP512GM604-I/PT

DSPIC33EP512GM604-I/PT - 70 MIPS DSC 512KB Flash 44-TQFP | Microchip

The Microchip Technology DSPIC33EP512GM604-I/PT is a high-performance 16-bit Digital Signal Controller (DSC) from the dsPIC33EPxxxGM6xx family, combining a 70 MIPS dsPIC DSC core with DSP engine and enhanced on-chip peripherals. Housed in a 44-pin TQFP (10x10 mm) package, it integrates 512 KB of Flash program memory, 16 KB of RAM, and dedicated motor-control analog (12 motor-control PWM, 8/8 IC/OC, 2 QEI, 4 op-amps) for high-performance precision motor control systems. A Digital Signal Controller (DSC) is a hybrid microcontroller that combines a deterministic MCU control loop with a single-cycle DSP engine, enabling real-time control algorithms alongside signal-processing math. In the system hierarchy, the DSC sits above a plain microcontroller (MCU) and below a full DSP + MCU pair, in the broader class of embedded processors. The dsPIC33E core specifically targets closed-loop control applications where FFT, FIR/IIR filters, and field-oriented control (FOC) math must execute inside a deterministic control period. Key features of the DSPIC33EP512GM604 include 70 MIPS CPU performance (operating up to 70 MHz with 3.0V to 3.6V Vdd), 4 DMA channels for low-CPU-overhead data movement, dual CAN modules for industrial networking, and on-chip op-amps that eliminate external analog front-end components. Boundary scan (JTAG) support and a barrel shifter further simplify field testing and arithmetic operations. The integrated op-amps and 12 PWM outputs cut the bill of materials for sensorless BLDC and PMSM motor drives. Architecturally, the device uses a Harvard memory structure with separate program and data paths, enabling 70 MIPS sustained throughput. Four DMA controllers offload peripheral-to-memory transfers, freeing the core for control loops. The motor-control PWM module provides edge-aligned and center-aligned modes with fault inputs, while dual 16-channel 10-bit ADCs sample phase currents synchronously to the PWM cycle for accurate FOC feedback. Typical applications include BLDC/PMSM/servo motor control (field-oriented control, sensorless drives), industrial automation drives (CNC, robotics, PLCs), solar inverters and power-conversion systems, automotive body electronics (HVAC blowers, fuel pumps, fans), uninterruptible power supplies (UPS), and medical pumps requiring precise torque control. The wide operating temperature range (-40C to +85C for the -I suffix) supports industrial and harsh-environment deployments. When designing with this device, ensure your PCB layout reserves a clean analog/digital split because the on-chip op-amps and ADC share AGND/AVSS pins; decouple Vdd/Vss with 100 nF ceramic capacitors within 5 mm of each pin pair. For FOC applications, plan the DMA mapping before coding to avoid real-time CPU stalls during high-frequency current sampling. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes that go beyond a simple manufacturer datasheet restatement, providing selection and procurement context for new designs and re-source campaigns.

RFQ যোগাযোগ

DSPIC33EP512GM604T-I/ML

DSPIC33EP512GM604T-I/ML - 16-bit 70 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GM604T-I/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering up to 70 MIPS performance with 512KB (170K x 24) of Flash program memory and 48KB of RAM, housed in a 44-pin QFN (8x8 mm) exposed-pad package operating from 3.0V to 3.6V. A digital signal controller combines the computational strengths of a microcontroller with the math-acceleration of a digital signal processor in a single chip. Within the power-management hierarchy of embedded systems, a DSC such as the dsPIC33EP sits above basic MCUs and is purpose-built for control loops that demand fast multiply-accumulate operations, making it a natural choice for digital power conversion and precision motor control. Key features include the 70 MIPS dsPIC33E core with DSP instruction support, 12 channels of complementary-output PWM for advanced motor control, two Quadrature Encoder Interface (QEI) modules for position feedback, integrated operational amplifiers that reduce external component count, and a Controller Area Network (CAN) module for robust industrial communication. The Peripheral Trigger Generator (PTG) automates peripheral sequencing and offloads the CPU. Technically, the device is fabricated in CMOS, supports low-power modes, includes four DMA channels for data movement without CPU intervention, a barrel shifter, and boundary-scan (JTAG) debug capability. The on-chop DSP engine plus rich analog integration (op amps, high-speed ADC per family datasheet) enables single-chip solutions for field-oriented motor control. Typical applications include brushless DC and PMSM motor drives, digital SMPS and power factor correction converters, and industrial automation nodes that require CAN connectivity alongside deterministic PWM control. When designing with this DSC, budget the 3.0V to 3.6V supply rail early and use the exposed pad as a low-inductance ground for the switching noise inherent in motor-drive environments. This page synthesizes distributor inventory data, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing checked as of 2026-09-25.

RFQ যোগাযোগ

DSPIC33EP512GM706-E/MR

DSPIC33EP512GM706-E/MR - 16-bit 70 MIPS DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GM706-E/MR is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 70 MIPS performance with 512 KB (170K x 24) of Flash program memory and 48 KB of RAM, supplied in a 64-pin VQFN (9x9 mm, QFN-64-EP) package with extended -40C to +125C temperature operation. A digital signal controller combines the compute characteristics of a digital signal processor with the peripheral set and control architecture of a microcontroller. Within the power management hierarchy of embedded processing, the DSC sits between general-purpose MCUs and dedicated DSPs, making dsPIC33E devices a common choice for control loops that also require fast multiply-accumulate arithmetic. Key features include the 16-bit dsPIC33E Harvard-architecture core running at 60 MHz (up to 70 MIPS), 12-channel motor control PWM, 8 input capture and 8 output compare channels, 2 quadrature encoder interfaces, on-chip operational amplifiers, and CAN connectivity for industrial networks. Architecturally, the dsPIC33EP core integrates DSP multiply-accumulate instructions, a zero-overhead DO and REPEAT loop mechanism, and an interrupt controller with deterministic latency, so precision control algorithms such as field-oriented motor control execute without external assistance. The extended-temperature E-grade suffix qualifies the device for harsh environments. Typical applications include precision motor control for industrial drives, digital power supplies and solar inverters, automotive auxiliary systems, and sensor signal processing where CAN or high-rate PWM peripherals are required. Design consideration: this -E/MR part ships in tube packaging with an exposed pad QFN footprint; ensure the PCB thermal pad is well-grounded for both heat dissipation and reliable supply distribution. This page synthesizes distributor pricing context, drop-in family alternatives, and practical design notes beyond what the manufacturer datasheet alone provides.

RFQ যোগাযোগ

DSPIC33EP512GM706-E/PT

DSPIC33EP512GM706-E/PT - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GM706-E/PT is a 16-bit digital signal controller (DSC) delivering up to 70 MIPS from its dsPIC33E core, with 512 KB of flash program memory, 48 KB of RAM, and integrated CAN and op-amp peripherals, housed in a 64-pin TQFP (10x10 mm, PT) package rated for -40C to +125C extended temperature operation. A digital signal controller combines the compute throughput of a digital signal processor with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs, making dsPIC33E-class devices a common choice for embedded motor control and digital power conversion where a single chip must run control loops and manage communications. Key features include the 70 MIPS dsPIC DSC core with DSP engine and barrel shifter, four DMA channels for offloading data movement, a 12-channel motor control PWM module, 8 input capture and 8 output compare channels, 2 quadrature encoder interfaces, and four integrated op amps plus a dedicated comparator for embedded analog signal conditioning. Controller Area Network (CAN) connectivity supports automotive and industrial networking. The integrated op amps allow current-sense amplification directly on-chip, reducing BOM count in FOC and sensorless motor drive designs. The enhanced flash architecture supports self-programming, and boundary-scan support aids production test. Automotive qualification and the extended -E temperature grade suit under-hood and industrial environments. Typical applications include precision brushless DC and PMSM motor control, digital power supplies and solar inverters, automotive body and powertrain auxiliary systems, and industrial sensing platforms that benefit from on-chip analog conditioning. Design tip: budget the 3.3V supply for the core and I/O and use the internal voltage regulator correctly; verify op-amp configuration registers against the family reference manual before relying on embedded analog stages. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ

DSPIC33EP512GM706-H/MR

DSPIC33EP512GM706-H/MR - 70 MIPS 512KB Flash DSC | Microchip

The Microchip Technology DSPIC33EP512GM706-H/MR is a 16-bit dsPIC33E digital signal controller (DSC) delivering up to 70 MIPS from its dsPIC DSC core, with 512 KB of Flash program memory, 48 KB of RAM, and a 3.3 V supply, housed in a 64-pin VQFN (9x9 mm) package with exposed pad. A digital signal controller combines the compute architecture of a microcontroller with the math acceleration of a DSP. Within the power management hierarchy of embedded processors, a DSC such as this sits between general-purpose MCUs and dedicated DSPs, offering deterministic single-cycle MAC (multiply-accumulate) DSP instructions plus rich on-chip peripherals. This makes the dsPIC33E family a default choice for closed-loop control systems where both fast arithmetic and flexible I/O are required in a single chip. Key features of the DSPIC33EP512GM706-H/MR include the 70 MIPS 16-bit pipeline core, 512 KB self-programming Flash with ECC-class reliability, 48 KB of on-chip SRAM, and an automotive-grade AEC-Q100 qualification with an extended operating temperature range of -40C to +150C. On-chip peripherals include CANbus, I2C, UART, and SPI communication interfaces, four op amps plus one dedicated comparator, motor-control PWM modules, and 53 general-purpose I/O pins. Technically, the dsPIC33E core executes DSP engine instructions such as MAC and dual-data fetch in a single cycle, supported by two address generation units and a 40-bit wide accumulator for high-precision filtering. The H temperature/qualification suffix denotes AEC-Q100 automotive screening, distinguishing it from industrial-grade I and E variants of the same die. The exposed-pad QFN package provides low thermal resistance and good ground inductance for mixed analog/digital designs. Typical applications include precision sensorless BLDC and PMSM motor control for automotive pumps and fans, digital power conversion (PFC, LLC, solar micro-inverters), and automotive body-electronics nodes that need CAN 2.0B connectivity with local signal conditioning via the integrated op amps. When designing, budget the supply and thermal design for the 150C ambient rating: derate the 70 MIPS operating frequency according to the datasheet frequency-versus-voltage curves, and use the exposed pad as the primary thermal and ground path on the PCB. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC33EP512GM706 family, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ

DSPIC33EP512GM706-H/PT

DSPIC33EP512GM706-H/PT - 70 MIPS 16-Bit DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GM706-H/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 70 MIPS performance with 512 KB (170K x 24) of FLASH program memory and 48 KB of SRAM, housed in a 64-pin TQFP (10x10 mm, 0.5 mm pitch) surface-mount package. A digital signal controller combines the computational architecture of a microcontroller with the DSP engine of a digital signal processor. In the embedded systems hierarchy, the dsPIC33EP sits between general-purpose 16-bit MCUs and full DSPs, offering deterministic single-cycle MAC (multiply-accumulate) instructions, DSP loops, and hardware divide support alongside conventional MCU peripherals, making it a power management IC-adjacent control device for real-time closed-loop systems. Key features include the 70 MIPS dsPIC DSC core operating from a 3.3 V supply, integrated CAN 2.0B for industrial and automotive networking, dual on-chip operational amplifiers for current-sense signal conditioning, high-speed PWM modules suited to motor-control inverters, and multiple UART, SPI, and I2C interfaces. The -H temperature grade supports operation from -40C to +150C, extending use into high-ambient environments such as under-hood and power-conversion enclosures. Technically, the device implements a modified Harvard architecture with a 24-bit instruction word, hardware looping, and bit-reversed addressing for FFT kernels. The analog front end pairs the op amps with high-speed 10/12-bit ADC sampling, enabling field-oriented control (FOC) of PMSM and BLDC motors without external analog conditioning stages, which reduces BOM cost and board area. Typical applications include precision motor control for industrial drives, digital power supplies and solar inverters, automotive body and powertrain auxiliary modules requiring CAN, and general sensor-fusion DSP tasks. Design consideration: at 70 MIPS the core draws significant transient current, so place low-ESR decoupling on every VDD pair and verify the 3.3 V rail droop during PWM switching events. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ

DSPIC33EP512GM706-I/MR

DSPIC33EP512GM706-I/MR - 70 MIPS 512KB Flash DSC | Microchip

The Microchip DSPIC33EP512GM706-I/MR is a 16-bit digital signal controller (DSC) featuring a 70 MIPS dsPIC33E core, 512KB (170K x 24) of Flash program memory, and 16KB of RAM, housed in a 64-pin VQFN (9x9) surface-mount package. A digital signal controller combines the computational strengths of a microcontroller (MCU) with the math-acceleration of a digital signal processor (DSP). Within the power-management hierarchy of embedded systems, a DSC sits between a general-purpose MCU and a dedicated DSP, offering C-programmable control flow, integrated flash, and single-cycle MAC and DSP instructions. Microchip's dsPIC33E family targets real-time embedded control where deterministic loop timing and rich peripherals matter more than raw throughput. Key features include the 70 MIPS dsPIC DSC core with integrated DSP engine, 12-channel motor control PWM (MCPWM) with complementary outputs and dead-time control, 8 input capture and 8 output compare channels, 2 quadrature encoder interface (QEI) modules, on-chip operational amplifiers and comparators, and a CAN bus interface. These peripherals make the device especially strong for field-oriented motor control and digital power conversion. Technically, the device operates from a 3V to 3.6V supply with clock operation up to 60 MHz (70 MIPS effective core speed via internal PLL). The rich analog front end (op amps, comparators, high-speed 10/12-bit ADC) reduces external component count in current-sense and protection circuits. Typical applications include BLDC/PMSM/ACIM precision motor control, digital power supplies and solar inverters, automotive-adjacent industrial drives, and sensor signal conditioning. The 2 QEI modules directly interface with rotary encoders in servo drives. Design consideration: the VQFN-64 (9x9) package requires careful PCB thermal grounding; connect the exposed pad to a solid ground plane. Verify RAM allocation carefully, as 16KB of RAM constrains large buffering applications. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ

DSPIC33EP512GM706-I/PT

DSPIC33EP512GM706-I/PT - 70 MIPS 16-bit DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GM706-I/PT is a 16-bit dsPIC33EP digital signal controller (DSC) delivering 70 MIPS performance, 512 KB (170K x 24) of self-write Flash program memory, four 16-bit timers, four DMA channels, and an integrated DSP engine, housed in a 64-pin TQFP (10x10 mm) surface-mount package. A digital signal controller (DSC) combines the deterministic real-time control peripherals of a microcontroller with the computational architecture of a digital signal processor. Within the broader power-management and embedded hierarchy, the DSC sits above general-purpose MCUs in signal-processing capability while retaining deterministic interrupt response, making the dsPIC33E family a bridge between embedded control and true DSP applications in the semiconductor device taxonomy. Key features include the 16-bit dsPIC DSC core clocked at up to 70 MIPS from an internal 7.37 MHz FRC oscillator with PLL, 512 KB of self-programmable Flash, single-cycle MAC DSP instructions, four on-chip operational amplifiers plus a dedicated comparator, CAN 2.0B support, four UART/SPI/I2C modules, and Peripheral Pin Select (PPS) for flexible I/O remapping. These integrated peripherals reduce external analog component count in closed-loop control systems and shrink the PCB footprint. Technically, the device operates from a 3.0V-3.6V supply, provides five 16-bit timers/counters and five external interrupts, and supports low-power modes including idle and doze. The CMOS process delivers robust noise immunity for industrial environments and the -I suffix confirms an industrial temperature grade of -40C to +85C. Typical applications include precision motor control (sensorless BLDC/PMSM, AC induction, and field-oriented control drives), digital power conversion, industrial automation nodes, and embedded sensing systems that exploit the internal op amps and CAN bus connectivity. The integrated op amps are specifically designed for current sensing in motor control feedback loops. When designing with this controller, allocate the 10x10 mm TQFP footprint with a solid ground plane and place 0.1 uF decoupling capacitors at every VDD/AVDD pin pair. The peripheral pin select feature simplifies PCB routing but must be configured in software before enabling any remappable peripheral. This page synthesizes verified distributor data, drop-in same-family alternatives, practical design notes, and AEO-optimized FAQs not consolidated in the manufacturer datasheet.

RFQ যোগাযোগ

DSPIC33EP512GM706T-I/MR

DSPIC33EP512GM706T-I/MR - 70 MIPS 16-bit DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GM706T-I/MR is a 16-bit digital signal controller (DSC) from the dsPIC33EP family featuring a 70 MIPS dsPIC DSC core, 512KB of Flash memory and 16KB of RAM, housed in a 64-pin VQFN (MR) package measuring 9x9x0.9 mm with an exposed thermal pad, supplied in tape-and-reel packaging for automated assembly. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and deterministic control of a microcontroller. Within the power-management hierarchy, the dsPIC33EP sits above simple MCUs and alongside dedicated motor-control processors, offering a single-cycle MAC, DSP multiply-accumulate engine, barrel shifter and hardware divide support, making it a natural choice in the digital signal controller and embedded processor category. Key features include 12 MCPWM channels for advanced motor-control pulse generation, 8 input capture and 8 output compare channels, 2 quadrature encoder interfaces (QEI) for position feedback, an integrated CAN 2.0B controller for industrial networking, and 4 on-chip operational amplifiers that can condition current-shunt signals without external op-amp ICs. Technical depth: the dsPIC33E core executes at up to 70 MIPS with 60 MHz clock operation, 3.0V to 3.6V supply range, and CMOS process technology. Peripherals include the CTMU (Charge Time Measurement Unit) for capacitive touch and time measurement, and PTG (Peripheral Trigger Generator) for sequencer-free peripheral coordination. Four DMA channels offload data movement, reducing CPU interrupt load in high-throughput sampling loops. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives for industrial automation, digital power supplies (PFC, LLC), and appliances requiring energy-efficient precision motor control, where the QEI inputs and MCPWM peripheral directly reduce external component count. Design consideration: the 64-VQFN exposed pad must be soldered to a solid ground plane; the 0.5 mm pin pitch requires careful PCB stencil design and inspection, so verify land-pattern compliance before release to production. This page synthesizes distributor pricing, verified drop-in alternatives, datasheet pointers, and practical design notes not consolidated on the manufacturer product page.

RFQ যোগাযোগ

DSPIC33EP512GM706T-I/PT

DSPIC33EP512GM706T-I/PT - 16-bit 70 MIPS DSC 512KB | Microchip

The Microchip Technology DSPIC33EP512GM706T-I/PT is a 16-bit digital signal controller (DSC) with a 70 MIPS dsPIC33E core, 512KB (170K x 24) of Flash program memory, 16KB of RAM, and a 64-pin TQFP (10x10 mm, 0.8 mm pitch) package. A digital signal controller combines the compute power of a DSP with the peripheral integration and ease of use of a microcontroller, sitting in the power management hierarchy between general-purpose MCUs (such as the PIC16 family) and full DSPs. DSCs execute multiply-accumulate (MAC) and barrel-shift operations in single cycles, which makes them the preferred choice for closed-loop control systems that require both fast math and rich on-chip peripherals. Key features of this device include the 70 MIPS dsPIC DSC core with DSP instruction set and barrel shifter, integrated operational amplifiers (4 Op-Amps), 12 MCPWM channels, 8 input capture and 8 output compare channels, 2 quadrature encoder interfaces (QEI), a CAN module, CTMU (charge time measurement unit), PTG (peripheral trigger generator), 4-channel DMA, and boundary-scan (JTAG) support. These peripherals directly address precision motor control, digital power conversion, and sensor signal conditioning. Architecturally, the dsPIC33E family uses a modified Harvard pipeline with 24-bit instruction words and 16-bit data paths, operating from a 3.0V to 3.6V supply. Low-power modes and clock switching support energy-efficient designs. The operating temperature range of the -I suffix is -40C to +85C for industrial environments. Typical applications include brushless DC and PMSM motor control, solar inverters and digital power supplies, CAN-based industrial automation nodes, and precision analog sensing using the on-chip Op-Amps and CTMU. Design tip: the TQFP-64 has a 0.8 mm lead pitch, so use solder-mask-defined pads and inspect with magnification; the exposed package requires a solid ground plane for thermal and EMC performance. This page synthesizes distributor availability, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ

DSPIC33EP512GM710-E/BG

DSPIC33EP512GM710-E/BG - 70 MIPS DSC 512KB TFBGA-121 | Microchip

The Microchip Technology DSPIC33EP512GM710-E/BG is a 16-bit digital signal controller (DSC) delivering up to 70 MIPS from an integrated DSP engine, with 512KB of flash program memory and 3.3V operation, housed in a 121-ball TFBGA (10x10 mm) package rated from -40C to +125C (extended temperature, E suffix). A digital signal controller combines the compute power of a microcontroller with the arithmetic throughput of a DSP. In the power-management hierarchy, the dsPIC33E family sits between general-purpose MCUs (such as the PIC24) and dedicated DSPs, offering a 16-bit Harvard architecture with DSP instructions, making it a popular choice for embedded control systems that need both deterministic control loops and math-heavy signal processing. Key features include the 70 MIPS dsPIC33E core with DSP and enhanced on-chip peripherals, 512KB (170K x 24) of flash program memory, up to 48KB of RAM, integrated op-amps (8) plus 2 comparators, 8 input capture / output compare channels, 4 quadrature encoder interfaces, CAN, I2C, SPI, UART/USART and IrDA connectivity, and an extended -40C to +125C operating range suited to harsh automotive and industrial environments. Technically, the device operates from a 60 MHz clock (per Newark listing) that yields the 70 MIPS rated performance through the dsPIC33E pipelined core. The analog subsystem with on-chip operational amplifiers can offload external signal conditioning, while the motor-control PWM and quadrature encoder interfaces allow closed-loop motor control without external gate drivers or encoder decoders. Code protection features are implemented per Microchip datasheet specifications. Typical applications include single and dual motor control (Microchip's MA330035 PIM uses this exact device with the Explorer 16 board for motor-control development), digital power supplies and solar inverters, automotive body and powertrain control modules, and industrial sensor signal conditioning where the on-chip op-amps reduce BOM cost. Design consideration: the 121-ball TFBGA package requires careful BGA-landing-pattern PCB design and X-ray-capable assembly; verify ball-map routing before layout. Place 0.1uF decoupling capacitors under or immediately adjacent to each VDD/VSS ball pair. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet alone.

RFQ যোগাযোগ

DSPIC33EP512GM710-E/PT

DSPIC33EP512GM710-E/PT - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GM710-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33E family, delivering up to 70 MIPS performance with 512 KB of Flash program memory, 16 KB of RAM, and a 100-pin TQFP (12x12 mm, PT) package in an extended automotive-grade temperature grade (AEC-Q100). A digital signal controller combines the compute architecture of a 16-bit microcontroller with the math acceleration of a DSP, sitting in the device hierarchy as DSC -> 16-bit microcontroller -> microcontroller unit -> semiconductor. The dsPIC33E core executes DSP instructions (MAC, DSP multiply-accumulate) alongside MCU peripherals, making it the standard choice for precision digital power and motor-control systems. Key features include the 70 MIPS dsPIC DSC core with integrated DSP engine, 512 KB Flash and 16 KB RAM, dual CAN modules, four on-chip operational amplifiers, quadrature encoder interface (QEI), and rich PWM/IC/OC timing resources cited by distributors as 8 input capture / 8 output compare channels. These peripherals directly address field-oriented motor control, sensorless FOC, and industrial networking. On the analog side, the GM family integrates four op amps and a high-speed 12-bit ADC, allowing current-shunt amplification and sampling without external amplifiers - a major board-area and BOM saving for multi-motor drives. The Single-Dual Motor Control PIM (document 50002216a) from Microchip demonstrates one- and two-motor operation using these internal op amps. Typical applications include brushless DC and PMSM motor drives, solar inverters and digital power supplies, automotive body and powertrain subsystems (the -E/PT grade is automotive AEC-Q100 qualified per distributor data), and industrial automation with CAN connectivity. For design, budget the 3.3V supply, use external crystals per the Microchip oscillator guidelines to reach the full 70 MIPS (PLL x4 from a 7.3728 MHz-class crystal family), and verify the 12x12 TQFP land pattern against the Microchip PT footprint drawing. This page synthesizes distributor pricing context, drop-in alternatives, design notes, and AEO-optimized FAQs not found in the manufacturer datasheet alone.

RFQ যোগাযোগ

DSPIC33EP512GM710-H/BG

DSPIC33EP512GM710-H/BG - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GM710-H/BG is a 16-bit digital signal controller (DSC) delivering 70 MIPS dsPIC33E core performance with 512 KB (512K bytes) of Flash program memory and 48 KB of RAM, housed in a 121-ball TFBGA package rated from -40C to +150C. A digital signal controller combines the computational power of a DSP engine with the peripheral set and ease of use of a microcontroller. Within the embedded processing hierarchy, the dsPIC33E family sits between general-purpose 16-bit MCUs and standalone DSPs, providing a single-chip solution for control-oriented digital signal processing tasks such as field-oriented motor control, digital power conversion, and sensor fusion. Key features include the 70 MIPS dsPIC33E CPU core with integrated DSP instructions (single-cycle MAC, 40-bit accumulator), two on-chip operational amplifiers, a CAN 2.0B module, and high-resolution PWM peripherals targeted at motor control - the datasheet headline is literally '70 MIPS, Motor Control, OpAmps, CAN'. The GM710 variant offers the largest memory configuration (512 KB Flash / 48 KB RAM) in its pin class. Architecturally, the dsPIC33E core pairs a modified Harvard 16-bit pipeline with a dedicated DSP multiply-accumulate unit, zero-overhead looping, and hardware division, while an extensive DMA controller offloads data movement between peripherals and RAM. The analog front end (op amps, 10/12-bit ADC with up to 4 Msps sampling on selected devices) enables direct sensor interfacing. Typical applications include single and dual motor drives (the manufacturer's Single-Dual Motor Control PIM, document 50002216a, is built around this exact part), digital power supplies and solar inverters, industrial automation nodes using the CAN bus, and high-temperature sensing systems benefiting from the -40C to +150C 'H' temperature grade. Design consideration: place the 0.1 uF decoupling capacitors on every VDD ball as close as possible to the 121-TFBGA package, and route the oscillator traces away from high-current PWM outputs to preserve the 70 MIPS core clock integrity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ

DSPIC33EP512GM710-H/PF

DSPIC33EP512GM710-H/PF - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GM710-H/PF is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 70 MIPS performance, 512 KB (170K x 24) of Flash program memory, and 48 KB of RAM, housed in a 100-pin TQFP (14x14 mm) package. A digital signal controller combines the compute throughput of a DSP core with the peripheral integration and deterministic interrupt architecture of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, a DSC such as this sits above general-purpose MCUs in signal-processing capability, making the dsPIC33E family a staple of digital power conversion, precision motor control, and sensor-fusion systems. Key features include the 70 MIPS dsPIC33E core with integrated DSP engine (single-cycle MAC, barrel shifter), dual CAN 2.0B modules, advanced motor-control PWM peripherals, and an integrated 12-bit ADC - the GM710 variant is explicitly marketed for 70 MIPS motor-control applications with on-chip operational amplifiers and CAN. The device provides 13 timers and 4 DMA channels for deterministic I/O handling. Architecturally, the controller uses a Harvard bus structure with an 8-bit program-memory width reported for the -E variant, boundary-scan (JTAG) debug support, and multiple internal bus architectures that let the DSP engine and instruction fetches proceed in parallel, sustaining the 70 MIPS rating across the supply range. Typical applications include precision motor control (single- and dual-motor drives using the dedicated PIM reference design), digital power supplies, industrial automation nodes with CAN networking, and automotive subsystems - the -H grade is built to AEC-Q100 requirements. Design consideration: the core operates from a 3.3 V supply; budget decoupling and observe the 70 MIPS clock-tree requirements (PLL configuration) in the clock layout. Confirm the exact operating temperature range and MSL rating for the -H grade against the manufacturer datasheet before reflow qualification. This page synthesizes distributor pricing context, drop-in same-family alternatives, and practical design notes not found on the manufacturer product page alone.

RFQ যোগাযোগ

DSPIC33EP512GM710-H/PT

DSPIC33EP512GM710-H/PT - 70MIPS DSC 512KB Flash 100-TQFP | Microchip

The Microchip Technology DSPIC33EP512GM710-H/PT is a 16-bit digital signal controller (DSC) from the dsPIC33E family delivering 70 MIPS performance with 512 KB of Flash program memory and 16 KB of RAM, housed in a 100-pin TQFP (PT) surface-mount package operating at 3.3V. A digital signal controller combines the computational capability of a digital signal processor with the peripheral integration and ease of use of a microcontroller. Within the power management hierarchy of embedded systems, the DSC sits between general-purpose MCUs and dedicated DSPs, making the dsPIC33E family a popular choice where control loops, math-intensive processing, and rich analog peripherals must coexist in a single chip. Key features include the 70 MIPS dsPIC33E CPU core with DSP engine (17-bit x 17-bit single-cycle hardware multiplier, 40-bit accumulator, barrel shifter), dual on-chip operational amplifiers, 12-bit ADC, multiple PWM modules for motor control, and CAN and UART/SPI/I2C communication interfaces. The -H suffix denotes an automotive-grade temperature variant supplied in tray packaging. Architecturally, the device uses a modified Harvard bus structure with separate program and data buses, supporting concurrent instruction fetch and data access. The enhanced peripherals - including input capture, output compare, quadrature encoder interface, and complementary PWM outputs - offload timing-critical tasks from the CPU, enabling deterministic real-time control at high loop rates. Typical applications span single- and dual-motor control (using the dedicated Single-Dual Motor Control PIM, MA330035, on the Explorer 16 platform), digital power conversion, automotive body and powertrain auxiliary systems, and industrial automation requiring sensor fusion with fast control loops. Design consideration: the 100-pin TQFP requires careful decoupling of the multiple VDD/VSS pairs and attention to the AVDD/AVSS analog supply filtering to realize full ADC and op-amp accuracy; expect higher pin count but manageable two-layer to four-layer PCB routing at 0.5 mm pin pitch. This page synthesizes distributor pricing context, drop-in alternatives across temperature grades, and practical design notes not found in the manufacturer datasheet alone.

RFQ যোগাযোগ

DSPIC33EP512GM710-I

DSPIC33EP512GM710-I - 70 MIPS 16-Bit DSC, 512KB Flash | Microchip

The Microchip DSPIC33EP512GM710-I is a 16-bit Digital Signal Controller (DSC) from the dsPIC33E family, integrating a 70 MIPS dsPIC DSC core with DSP and enhanced on-chip peripherals. The device is offered in a 100-pin TQFP (PF) package with 512 KB of Flash and 48 KB of RAM, targeting high-performance motor control, digital power conversion, and general-purpose DSP applications. A Digital Signal Controller (DSC) is a hybrid MCU/DSP architecture that combines a microcontroller's deterministic control peripherals with a DSP engine's parallel math capabilities. Within the broader taxonomy, the DSPIC33EP512GM710-I belongs to: DSC -> dsPIC33E family -> 16-bit MCU -> embedded microcontroller -> semiconductor. This dual-core approach enables single-chip implementations of field-oriented control (FOC), power-factor correction, and audio/sensor processing that would otherwise require a discrete MCU plus DSP. Key features include 70 MIPS CPU performance, 512 KB self-programmable Flash with ECC, 48 KB SRAM, dual CAN modules, two 12-bit ADC modules with up to 16 analog inputs, three op-amps, three comparators, twelve PWM channels with 1.04 ns resolution, two QEI modules for quadrature encoder feedback, and a Peripheral Trigger Generator (PTG). The integrated analog front-end reduces BOM count by eliminating external op-amps for current sensing in motor control designs. The device operates from 3.0V to 3.6V and supports an industrial -40C to +85C temperature range. The dsPIC33E core uses a Harvard architecture with separate 16-bit data paths and a 24-bit instruction word, providing deterministic interrupt latency and single-cycle 16x16 MAC operations that are essential for closed-loop control loops at high PWM frequencies. Typical applications include BLDC/PMSM motor drives, servo control, solar inverters, UPS systems, induction heating, and automotive body controllers. The wide integration of op-amps, ADC, PWM, and QEI makes the DSPIC33EP512GM710-I particularly attractive for sensored and sensorless FOC motor control, where it can drive MOSFET/IGBT bridges directly while simultaneously executing fast control loops. Design consideration: when migrating code from the earlier dsPIC33F family, review the instruction-set and peripheral differences (DMA controller, PTG, and PPS). For new designs, prefer the 100-pin TQFP variant (PF) for hand-rework prototyping or the 121-pin TFBGA (BG) for compact high-density layouts. This page synthesizes verified distributor pricing, Microchip datasheet specifications, drop-in same-package alternatives, and field-tested design notes not consolidated on a single distributor page, helping engineers compare, source, and integrate the DSPIC33EP512GM710-I efficiently.

RFQ যোগাযোগ

DSPIC33EP512GM710-I/BG

DSPIC33EP512GM710-I/BG - 16-bit 70MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GM710-I/BG is a 16-bit digital signal controller (DSC) from the dsPIC33EP family delivering 70 MIPS performance with 512KB (170K x 24) of Flash program memory, housed in a 121-ball TFBGA (10x10 mm) package rated from -40C to +85C. A digital signal controller combines the computational throughput of a DSP with the control peripherals and interrupt architecture of a microcontroller. Within the power management hierarchy, the dsPIC33E family sits at the high-performance end of 16-bit control ICs, bridging general-purpose MCUs and dedicated DSPs for embedded motor, power and signal-chain control. Key features include a 70 MIPS dsPIC DSC core running at up to 140 MHz (per distributor listings), 512KB of ECC Flash, CAN, I2C, SPI, UART/USART, IrDA, LIN and QEI connectivity, and peripherals such as Brown-out Detect/Reset and DMA. Integrated op amps and motor-control peripherals make the GM710 variant especially well suited to digital power and motion applications. Architecturally, the dsPIC33EP core uses a modified Harvard pipeline with DSP multiply-accumulate (MAC) instructions, enabling single-cycle execution of filtering and control-loop math. Enhanced on-chip peripherals reduce external component count in digital power supplies, PFC stages, and multi-motor drives, as demonstrated in Microchip's Single/Dual Motor Control PIM reference design (document 50002216a). Typical applications include BLDC and PMSM motor control, switch-mode power supplies and solar inverters, automotive and industrial CAN nodes, and digital audio or sensor signal processing where 16-bit control plus DSP math is required. When designing with this device, plan pin assignment through Peripheral Pin Select (PPS) early, since remappable RPn pins impose some peripheral-combination limitations described in Section 11.4 of the datasheet (70000689d). This page synthesizes distributor pricing, drop-in alternatives, design notes, and lifecycle information not found in the manufacturer datasheet.

RFQ যোগাযোগ

DSPIC33EP512GM710-I/PF

DSPIC33EP512GM710-I/PF - 70 MIPS DSC, 512KB Flash, TQFP-100 | Microchip

The Microchip Technology DSPIC33EP512GM710-I/PF is a 16-bit digital signal controller (DSC) from the dsPIC33EP GM family, delivering 70 MIPS performance from a dsPIC33E core, integrating 512 KB of flash program memory and 53 KB of RAM, and packaged in a 100-pin TQFP (14x14 mm, 0.5 mm pitch) footprint with industrial temperature rating of -40C to +85C. A digital signal controller combines the deterministic interrupt handling and peripheral set of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. In the power-management hierarchy, DSCs occupy the niche between general-purpose MCUs and standalone DSPs, making them the default choice for closed-loop control systems such as digital power conversion, motor control, and sensor signal processing. The dsPIC33E core executes an optimized C compiler-friendly instruction set with single-cycle MAC operations. Key differentiating features of the GM710 include a DSP engine with 17-bit x 17-bit single-cycle MAC, dual 40-bit accumulators, and rounded saturation modes that prevent overflow artifacts in control loops. The device integrates 12-bit ADC channels operating up to approximately 1.1 Msps, motor-control PWM with dedicated fault inputs, input capture/output compare, quadrature encoder interface (QEI), CAN 2.0B, multiple UART/SPI/I2C ports, and on-chip operational amplifiers - analog blocks that directly support sensorless motor control and power-supply feedback loops without external amplifiers. Architecturally, the device operates from a 3.0V to 3.6V single supply, includes flash self-programming, code protection, and a peripheral set reducing external component count. The on-chip op amps buffer shunt-resistor feedback for field-oriented control (FOC) of PMSM and BLDC motors, while the QEI module interfaces directly to incremental encoders for sensored servo drives. The General Purpose Plug-In Module documentation (Microchip document 50002216a) explicitly targets single/dual motor control using this device on the Explorer 16 platform. Typical applications include single and dual motor drives, solar inverters, digital LED drivers, UPS systems, automotive body electronics, and industrial automation nodes. The wide operating voltage range and rich peripheral integration make it equally suitable for sensorless BLDC ceiling fans, servo drives, and power-factor-corrected SMPS control loops. Design consideration: allocate VDD/VSS decoupling per datasheet recommendations on the 100-pin TQFP, and route analog op-amp inputs away from PWM switching edges to preserve ADC accuracy. The PIM (Plug-In Module) configuration for the Explorer 16 board (MA330035) provides a ready-to-use evaluation platform. This page synthesizes distributor pricing tiers, drop-in alternatives, pin-count details, and practical design notes not consolidated in the manufacturer datasheet.

RFQ যোগাযোগ

DSPIC33EP512GM710-I/PT

DSPIC33EP512GM710-I/PT - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GM710-I/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC33E family delivering 70 MIPS throughput, 512 KB flash program memory, and 48 KB RAM in a 100-pin TQFP (12x12 mm) package. It integrates a dsPIC DSC core with hardware DSP instructions, 12 motor-control PWM channels with 1 ns resolution, four on-chip operational amplifiers, and dual CAN (ECAN) modules. Operating voltage is 3.0 V to 3.6 V across the industrial temperature range of -40 C to +85 C. A digital signal controller (DSC) is a hybrid device that combines the real-time control peripherals and deterministic interrupt behavior of a microcontroller (MCU) with the single-cycle multiply-accumulate (MAC) arithmetic and barrel shifter of a digital signal processor (DSP). In the system hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP: it is a microcontroller-class device with DSP-class math throughput, used where closed-loop control must execute in microseconds. The dsPIC33E family is Microchip's third-generation 16-bit DSC platform targeting motor control, digital power conversion, and automotive sensorless field-oriented control. Key features include 70 MIPS operation at 70 MHz, 512 KB (170K x 24-bit) flash with 48 KB RAM, 12 motor-control PWM outputs with 1 ns edge resolution, four on-chip op amps with selectable gain, 8/8 input-capture/output-compare channels, two QEI interfaces, four DMA channels, and boundary-scan (JTAG) support. The 100-pin TQFP package exposes four 12-bit ADCs and connectivity including CAN, I2C, IrDA, LIN, SPI, and UART/USART, enabling single-chip control of dual-motor or PFC-plus-motor topologies. The device is fabricated in CMOS and uses a precision bandgap-based analog core for the integrated op amps and ADC references. The four on-chip op amps eliminate external signal-conditioning stages for current-shunt amplification in motor drives, reducing BOM count and PCB area. Boundary scan (JTAG) and four DMA channels reduce CPU overhead in data-movement-intensive control loops. The barrel shifter accelerates fixed-point DSP operations used in field-oriented control transforms. Typical applications include sensorless field-oriented control (FOC) of PMSM and BLDC motors, digital power supplies and PFC stages, automotive motor and pump controllers, industrial servo drives, and solar micro-inverters. The 70 MIPS core combined with 1 ns PWM resolution allows current-loop bandwidths above 10 kHz with adequate computational headroom for both Clarke-Park transforms and space-vector modulation. When designing with this device, note that the 100-pin TQFP (12x12 mm) footprint is shared across the dsPIC33EP512GM710 family, so firmware and layout can be reused across memory and temperature variants. Decouple each VDD pin with a 0.1 uF ceramic capacitor placed within 5 mm of the pin. Place the analog AVdd pins away from switching PWM traces to minimize coupling. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for selection, replacement, and layout decisions.

RFQ যোগাযোগ

DSPIC33EP512GM710T-I/BG

DSPIC33EP512GM710T-I/BG - 16-bit 70 MIPS DSC | Microchip

The Microchip Technology DSPIC33EP512GM710T-I/BG is a 16-bit digital signal controller (DSC) from the dsPIC33EP family featuring a 70 MIPS dsPIC DSC core, 512KB (170K x 24) of Flash program memory, and up to 48KB of RAM, housed in a 121-ball TFBGA (10x10 mm) package. It is a tape-and-reel variant rated for -40C to +85C industrial operating range. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power management IC hierarchy, DSCs sit between general-purpose MCUs and dedicated DSPs, offering single-cycle multiply-accumulate (MAC) and DSP-engine instructions while retaining MCU-style interrupt, I/O, and peripheral control. Microchip's dsPIC33E family is a direct successor to the popular dsPIC30F/33F families. Key features include the 70 MIPS dsPIC33EP core with integrated DSP engine, 12-channel motor control PWM (MCPWM), 8 input capture and 8 output compare channels, two quadrature encoder interfaces (QEI), four integrated operational amplifiers, a charge time measurement unit (CTMU), and the peripheral trigger generator (PTG). CAN and multiple communication interfaces (UART, SPI, I2C) support industrial networking. The architecture provides four DMA channels for efficient data transfer, a barrel shifter, boundary-scan (JTAG) capability, and multiple internal bus architectures that keep the 70 MIPS core fed without peripheral bottlenecks. The integrated op-amps and comparators reduce external analog component count in sensor conditioning and current-sense circuits for motor drives. Typical applications include precision sensorless field-oriented control (FOC) motor drives, digital power supplies and PFC stages, industrial automation controllers, and audio/signal processing endpoints that require DSP throughput with MCU flexibility. When designing, budget for the 3.0V-3.6V supply rail, decouple each VDD/VSS ball pair with 0.1uF ceramics placed close to the package, and verify the TFBGA-121 footprint against the Microchip datasheet mechanical drawing before PCB fabrication. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ

DSPIC33EP512GM710T-I/PF

DSPIC33EP512GM710T-I/PF - 16-bit 70 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GM710T-I/PF is a 16-bit dsPIC33EP digital signal controller (DSC) delivering up to 70 MIPS from 512 KB (170K x 24) of Flash program memory, integrated in a 100-pin TQFP (14x14 mm) package. It combines DSP engine, motor-control PWM, and analog integration in one chip. A digital signal controller is a hybrid of a microcontroller (MCU) and a digital signal processor (DSP): it executes general-purpose control code like an MCU while performing fast multiply-accumulate math like a DSP. In the embedded hierarchy, the DSC sits between MCUs and dedicated DSPs, ideal for closed-loop control systems such as field-oriented motor control and digital power conversion. Key features include 12 MCPWM channels for motor control, 8 input capture / 8 output compare channels, 2 quadrature encoder interfaces (QEI), 4 on-chip operational amplifiers, a CTMU charge-time-measurement unit for touch/timing applications, and the PTG programmable sequencer. Two CAN modules and multiple UART/SPI/I2C ports cover industrial communication needs. The dsPIC33E core uses a modified Harvard architecture with a 24-bit instruction word, DSP multiply-accumulate, barrel shifter, and DMA-supported data movement, allowing single-cycle MAC operations for filter and transform algorithms at 70 MIPS. Typical applications include precision BLDC/PMSM motor drives, digital power supplies, industrial automation, and sensor signal conditioning, where the integrated op amps and 12-channel MCPWM directly drive gate circuitry with minimal external components. Design consideration: the I variant is rated -40C to +85C; use the E variant for 125C environments, and budget Flash wisely since the GM710 has no external memory bus. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ

DSPIC33EP512GM710T-I/PT

DSPIC33EP512GM710T-I/PT - 16-bit 70 MIPS DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GM710T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EP family, delivering 70 MIPS performance with 512 KB (170K x 24) of Flash program memory, 48 KB of RAM, and a 3.3 V supply, housed in a 100-pin TQFP (12 x 12 mm) package with industrial temperature rating of -40C to +85C. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). In the embedded systems hierarchy, the dsPIC33EP sits between general-purpose MCUs and dedicated DSPs, offering single-cycle MAC, DSP instruction support, and deterministic interrupt handling for real-time closed-loop control applications. Key features of the DSPIC33EP512GM710T-I/PT include the 70 MIPS dsPIC DSC core, 12 motor control PWM channels, 8 input capture and 8 output capture channels, two quadrature encoder interfaces (QEI), four integrated operational amplifiers, and a Charge Time Measurement Unit (CTMU) for capacitive touch and precision timing. The device also integrates a CAN 2.0B controller and multiple serial ports for industrial connectivity. Technically, the dsPIC33E core features a 16-bit modified Harvard architecture with a 24-bit instruction word, 13 timers, 4 DMA channels, and 4 serial I/O ports, enabling deterministic real-time behavior. The integrated op-amps can be internally connected to ADC inputs, reducing external component count in current-sense and signal-conditioning chains for motor drives. Typical applications include precision brushless DC and PMSM motor control, industrial power supplies, digital lighting (HID/LED ballasts), and embedded control systems requiring CAN networking. The four op-amps and QEI interfaces make the GM710 variant particularly well suited to servo and encoder-based motion systems. A key design consideration: the 100-pin TQFP has 0.40 mm lead pitch, requiring careful PCB land pattern design and reflow profiling; decouple all VDD/VSS pairs with 0.1 uF ceramics placed close to each supply pin. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, optimizing selection for engineers evaluating dsPIC33EP512GM710 options.

RFQ যোগাযোগ

DSPIC33EP512GP502-E/MM

DSPIC33EP512GP502-E/MM - 16-bit DSC 512KB Flash 28-QFN | Microchip

The Microchip Technology DSPIC33EP512GP502-E/MM is a 16-bit digital signal controller (DSC) with 512 KB flash program memory, 48 KB RAM, and a 60 MHz core delivering up to 70 MIPS performance, housed in a 28-pin QFN-S (6x6 mm) package with extended temperature support (-40C to +125C) and AEC-Q100 qualification. A digital signal controller combines the compute architecture of a 16-bit microcontroller with the multiply-accumulate and DSP instruction engine of a digital signal processor. Within the power-management hierarchy, a DSC sits between general-purpose MCUs and dedicated DSPs, making it ideal for control loops that require both fast math and rich peripheral integration. The dsPIC33E family is Microchip's high-performance 16-bit DSC platform for embedded control systems. Key features of the dsPIC33EP512GP502 include the highest-speed 70 MIPS dsPIC33E core, superior ADC performance, CAN communication, a Charge Time Measurement Unit (CTMU), an integrated operational amplifier (op amp) and comparators, high-speed PWM outputs, and a Peripheral Trigger Generator (PTG) for autonomous peripheral sequencing. These peripherals offload timing-critical tasks from the CPU, reducing interrupt latency and firmware complexity. Technically, the device executes an enhanced 16-bit RISC instruction set with DSP extensions, supporting In-Circuit and In-Application Programming, two program and two complex data breakpoints, and IEEE 1149.2-compatible (JTAG) boundary scan for trace and run-time watch. The 512 KB flash is organized as 170K x 24-bit words, and on-chip flash ECC improves reliability in electrically noisy environments. Typical applications include digital power supplies and power factor correction, brushless DC and PMSM motor control, automotive body and comfort modules (leveraging AEC-Q100 qualification), and industrial sensing with the CTMU for capacitive-touch or time-domain measurements. For design, note that the QFN-28 package requires careful thermal pad grounding and the device typically runs from a single 3.3V supply with core voltage internally regulated via a VCAP capacitor - follow the manufacturer datasheet layout guidance exactly. This page synthesizes distributor pricing, pin-compatible family alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ যোগাযোগ

DSPIC33EP512GP502-E/SO

DSPIC33EP512GP502-E/SO - 70 MIPS 16-bit DSC 512KB Flash | Microchip

The Microchip Technology DSPIC33EP512GP502-E/SO is a 16-bit Digital Signal Controller (DSC) from the dsPIC33EP General Purpose family, delivering up to 70 MIPS core performance with 512 KB of Flash program memory, 48 KB of RAM, and an extended-temperature range of -40C to +125C in a 28-pin SOIC (7.50 mm width) surface-mount package. It operates from a 3.0 V to 3.6 V supply and integrates Hi-Speed PWM, analog comparators, op amps, and advanced analog peripherals for high-end embedded control. A Digital Signal Controller combines the peripheral set and cost structure of a microcontroller with the multiply-accumulate throughput of a DSP. Within Microchip's hierarchy, the dsPIC33EP sits above PIC16/PIC18 MCUs and alongside PIC24EP 16-bit MCUs, targeting real-time control loops such as digital power conversion, motor control, and digital filtering that general-purpose MCUs handle poorly. Key features include the 70 MIPS 16-bit core with DSP engine (17-bit x 17-bit multiplier, 40-bit accumulator), 512 KB of self-programmable Flash organized as 170K x 24-bit words, 4 DMA channels, 5 timers, CAN 2.0B communication, a Charge Time Measurement Unit (CTMU), and the Peripheral Trigger Generator (PTG) for autonomous task triggering. The architecture provides superior ADC performance for the class, multiple PGECx/PGEDx ICSP debug channels, and 15 interrupt sources with low-power sleep and idle modes. The -E/ temperature grade (up to +125C) and AEC-Q100 qualification make it suitable for automotive and harsh-industrial environments. Typical applications include brushless DC and PMSM motor control, switch-mode power supplies and digital lighting ballasts, automotive body modules, and industrial sensing front-ends leveraging the integrated op amps and comparators. For design, note that this part has more than one pair of PGECx/PGEDx pins: use any pair for ICSP, but ICSPCLK and ICSPDAT must come from the same pair, and all VDD/VSS pins must be connected. The internal core regulator requires the specified VCAP capacitor. This page adds distributor inventory insights, drop-in same-family alternatives, and practical design notes beyond the manufacturer datasheet.

RFQ যোগাযোগ

উপশ্রেণী

পণ্য (39,000+)

DSPIC33EP512GM604-I/PT - 70 MIPS DSC 512KB Flash 44-TQFP | Microchip

DSPIC33EP512GM604T-I/ML - 16-bit 70 MIPS DSC 512KB Flash | Microchip

DSPIC33EP512GM706-E/MR - 16-bit 70 MIPS DSC, 512KB Flash | Microchip

DSPIC33EP512GM706-E/PT - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

DSPIC33EP512GM706-H/MR - 70 MIPS 512KB Flash DSC | Microchip

DSPIC33EP512GM706-H/PT - 70 MIPS 16-Bit DSC 512KB Flash | Microchip

DSPIC33EP512GM706-I/MR - 70 MIPS 512KB Flash DSC | Microchip

DSPIC33EP512GM706-I/PT - 70 MIPS 16-bit DSC 512KB Flash | Microchip

DSPIC33EP512GM706T-I/MR - 70 MIPS 16-bit DSC 512KB Flash | Microchip

DSPIC33EP512GM706T-I/PT - 16-bit 70 MIPS DSC 512KB | Microchip

DSPIC33EP512GM710-E/BG - 70 MIPS DSC 512KB TFBGA-121 | Microchip

DSPIC33EP512GM710-E/PT - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

DSPIC33EP512GM710-H/BG - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

DSPIC33EP512GM710-H/PF - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

DSPIC33EP512GM710-H/PT - 70MIPS DSC 512KB Flash 100-TQFP | Microchip

DSPIC33EP512GM710-I - 70 MIPS 16-Bit DSC, 512KB Flash | Microchip

DSPIC33EP512GM710-I/BG - 16-bit 70MIPS DSC 512KB Flash | Microchip

DSPIC33EP512GM710-I/PF - 70 MIPS DSC, 512KB Flash, TQFP-100 | Microchip

DSPIC33EP512GM710-I/PT - 70 MIPS 16-bit DSC, 512KB Flash | Microchip

DSPIC33EP512GM710T-I/BG - 16-bit 70 MIPS DSC | Microchip

DSPIC33EP512GM710T-I/PF - 16-bit 70 MIPS DSC 512KB Flash | Microchip

DSPIC33EP512GM710T-I/PT - 16-bit 70 MIPS DSC 512KB Flash | Microchip

DSPIC33EP512GP502-E/MM - 16-bit DSC 512KB Flash 28-QFN | Microchip

DSPIC33EP512GP502-E/SO - 70 MIPS 16-bit DSC 512KB Flash | Microchip