মাইক্রোকন্ট্রোলার

পণ্য (20,000+)

MPXS2010VLQ80 - 32-Bit 80MHz 1MB MCU | NXP | Automotive
MPXS2010VLQ80

MPXS2010VLQ80 - 32-Bit 80MHz 1MB MCU | NXP | Automotive

The NXP Semiconductors MPXS2010VLQ80 is a 32-bit e200z4d Power Architecture microcontroller operating at 80 MHz, with 1 MB of flash memory and a 144-LQFP 20 x 20 mm package. The verified distributor data identifies the device as an automotive-temperature-grade MCU and describes a 3.3 V / 5 V operating class. It is suited to embedded automotive control, body electronics, actuator control, instrumentation, and communication-oriented systems where a 32-bit processor, local flash storage, and a high-pin-count package are required. What is a 32-bit microcontroller? A microcontroller is a semiconductor device integrating a processor core, program memory, data memory, peripherals, and interface logic on one integrated circuit. The e200z4d core belongs to the Power Architecture family and provides the computational base for real-time embedded control. In the broader hierarchy, MPXS2010VLQ80 is a microcontroller, embedded processor, semiconductor, and programmable control component. Its 1 MB flash capacity provides room for application code and configuration data, while the 80 MHz clock supports time-dependent control and communication tasks. The supplied data specifically identifies a 32-bit e200z4d core, 80 MHz operation, 1 MB flash organized as 1M x 8, 144 LQFP construction, and automotive temperature grade. The package is described as gull-wing, square, and 20 x 20 mm. These features make the MPN appropriate for larger control modules that need numerous external connections and a conventional fine-pitch surface-mount package. The available verified data does not state RAM size, peripheral inventory, supply-voltage limits, flash endurance, or detailed pin assignments; those values must be confirmed from the official manufacturer documentation before a new design is released. Typical automotive uses include motor and solenoid control, central body modules, sensor aggregation, actuator interfaces, power-window or seat systems, lighting control, and gateway or communications modules. The 144-pin LQFP gives the design access to many external signals compared with a small leadless package, making it convenient for systems requiring several sensors, drivers, communication lines, and discrete control outputs. The 3.3 V / 5 V designation also makes it relevant to mixed-voltage automotive electronics, but the exact rail tolerances and I/O levels require confirmation. For PCB implementation, use the exact NXP datasheet package drawing and pinout rather than relying on generic LQFP assumptions. Confirm exposed-pad or thermal requirements, recommended decoupling, oscillator connections, reset behavior, programming interface, and unused-pin treatment. The 1 MB flash and 80 MHz rating should not be treated as a complete performance guarantee because peripheral clocks and memory-wait behavior require the missing technical data. This product page combines verified distributor specifications, package information, lifecycle-relevant sourcing context, and engineering selection guidance. It intentionally identifies unavailable parameters instead of estimating them, helping engineers distinguish confirmed facts from information that still needs manufacturer-datasheet confirmation.

RFQ যোগাযোগ
MPXS2010VMM80 - 80MHz 1MB 32-Bit MCU | NXP
MPXS2010VMM80

MPXS2010VMM80 - 80MHz 1MB 32-Bit MCU | NXP

NXP Semiconductors MPXS2010VMM80 is a 32-bit e200z4d PX-series microcontroller operating at 80 MHz, with 1 MB (1M x 8) flash memory, in a 257-LFBGA package measuring 14 x 14 mm. The verified distributor information identifies this device as a PXS20-family MCU and lists the package as MAPBGA-257 or 257-LFBGA. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and interface logic. The PXS20 family belongs to the embedded-processing hierarchy of 32-bit MCU, embedded controller, real-time control, and industrial automation semiconductor devices. This MPXS2010VMM80 combines an e200 RISC architecture with flash-backed program storage for embedded control, communications, and safety-oriented industrial systems. The principal verified specifications are a 32-bit processing architecture, 80 MHz operating frequency, and 1 MB (1M x 8) flash memory. Distributor records also identify an automotive temperature grade, although the exact numeric operating-temperature limits and qualification status are not supplied in the verified data. The 257-ball package exposes the device's extensive external memory, communication, control, debug, and power connections. Typical automotive and industrial uses include powertrain-related control, electronic control units, body and chassis electronics, real-time communications, and safety subsystems. The 80 MHz processing rate supports deterministic embedded workloads, while the 1 MB flash capacity provides room for application code and configuration data. The PXS20 documentation references the PXS20 Microcontroller Reference Manual for functional characteristics and a Safety Application Guide for fail-safe system implementation under IEC 61508. The large BGA package makes PCB layout and thermal design more demanding than a leaded package. Designers should follow the manufacturer's pin assignment, escape-routing, decoupling, and soldering guidance, verify the exposed thermal and supply connections, and complete signal-integrity and power-integrity reviews before release. This page combines the verified distributor identity, package, frequency, memory, pricing, and availability information with application guidance and explicit sourcing boundaries. Missing electrical, pin-level, lifecycle, and qualification values remain marked for verification rather than being inferred from related PXS20 devices.

RFQ যোগাযোগ
MPXS3010VMM150 - PXS30 Dual-Core 150MHz MCU, 1MB Flash, 257-LFBGA | NXP
MPXS3010VMM150

MPXS3010VMM150 - PXS30 Dual-Core 150MHz MCU, 1MB Flash, 257-LFBGA | NXP

The NXP MPXS3010VMM150 is a 32-bit dual-core automotive microcontroller based on the e200z7d Power Architecture cores, operating at up to 150 MHz and packaged in a 257-ball LFBGA (14x14 mm). It integrates 1 MB of embedded flash and 256 KB of SRAM, targeting chassis, body, and safety microcontrollers in next-generation vehicle electrical architectures. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals including timers, ADCs, communication controllers, and GPIO. Within the broader semiconductor hierarchy, an MCU is a sub-category of microprocessors and embedded processors, itself a category of integrated circuits (ICs). The PXS30 family sits inside NXP's chassis and safety MCU portfolio, designed to deliver deterministic real-time performance for ASIL-rated applications. Key features of the MPXS3010VMM150 include dual e200z7d cores running up to 150 MHz, 1 MB of on-chip flash for application code, 256 KB of SRAM for data and stack operations, and an integrated peripheral set targeted at automotive networks (CAN, LIN, FlexRay) and motor-control PWM. The 257-LFBGA package provides a compact 14x14 mm footprint while exposing the full set of address, data, and peripheral pins required for high-throughput signal processing. Technically, the PXS30 architecture leverages a superscalar e200z7d core with branch prediction and DSP extensions, supporting single-precision floating point and signal-processing instructions required for sensor fusion and control loops. The on-chip flash controller and ECC-protected SRAM improve functional safety, while the multi-channel timer and ADC subsystem allows direct interface with resolver, encoder, and current-sensing front ends. Typical applications include automotive chassis control, electric power steering, electronic stability control, airbag systems, and other ASIL-rated safety microcontrollers. The combination of dual-core lockstep capability, large flash, and automotive-qualified peripherals makes it well suited to chassis domain controllers and integrated vehicle dynamics modules. When designing with this part, allocate sufficient PCB area for the 14x14 mm BGA and follow NXP's recommended reflow and decoupling guidelines for fine-pitch BGAs, including microvia stack-ups and matched-length impedance routing for high-speed signals. Plan for boot, debug, and JTAG access during layout to avoid respins. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in alternative MCUs from the same PXS30 family, and practical design notes not collected on any single manufacturer or distributor page.

RFQ যোগাযোগ
MPXS3015VMS180 - 180MHz Dual-Core MCU, 1.5MB Flash | NXP
MPXS3015VMS180

MPXS3015VMS180 - 180MHz Dual-Core MCU, 1.5MB Flash | NXP

NXP Semiconductors MPXS3015VMS180 is a 32-bit dual-core e200z7d PX microcontroller operating at 180 MHz, with 1.5 MB of 8-bit program flash and 384 Kbytes of RAM, supplied in a 473-terminal 19 mm square MAPBGA package. The verified distributor listing also identifies it as automotive-temperature-grade hardware. These headline values place it in the high-performance embedded processor category rather than the basic 8-bit or low-cost 32-bit MCU class. A microcontroller is a semiconductor system containing a processor core, nonvolatile program memory, RAM, peripherals, and interface logic on one integrated device. The MPXS3015VMS180 belongs to the hierarchy MCU, embedded processor, 32-bit microcontroller, and integrated circuit. Its dual e200z7d cores and substantial memory make it suitable for systems that need concurrent control tasks and embedded software rather than only basic input/output sequencing. The verified data confirms 32-bit processing, two cores, a 180 MHz operating speed, and 1.5 MB of flash. A separate verified specification source identifies RAM as 384 Kbytes by 8 bits. The 473-MAPBGA package has a 19 mm by 19 mm body and uses balls rather than wire leads. Partstack further classifies the terminal form as BALL and the package code as LFBGA, while its temperature-grade classification is automotive. This combination of dual-core compute and 1.5 MB program memory can support automotive-oriented embedded controllers, industrial equipment, networking appliances, and other multi-task systems where software organization benefits from parallel instruction streams. The available data does not identify individual communication interfaces, analog functions, supply limits, security features, or pin multiplexing, so those capabilities must be checked in the manufacturer documentation before design release. Thermal and layout planning are critical because a 473-ball BGA concentrates many connections in a 19 mm by 19 mm footprint. Board assembly, ball pitch, escape routing, exposed-pad treatment, and the manufacturer’s recommended land pattern must be verified from the datasheet. A numerically complete 473-pin assignment cannot be reproduced from the supplied snippets without risking incorrect ball mapping. For new designs, engineers should obtain the official Freescale or NXP documentation, confirm the exact pinout and electrical limits, validate software-tool support for the e200z7d architecture, and run lifecycle and supply checks before committing to production. Distributor availability does not by itself establish manufacturer lifecycle status or guaranteed stock. This page combines the verified distributor specifications, pricing evidence, package information, sourcing links, and engineering cautions in one place. It also distinguishes confirmed facts from unavailable parameters and avoids presenting unverified pin assignments or substitute parts as drop-in replacements.

RFQ যোগাযোগ
MPXS3020VMS180 - 180MHz Dual-Core e200z7d MCU 473-MAPBGA | NXP
MPXS3020VMS180

MPXS3020VMS180 - 180MHz Dual-Core e200z7d MCU 473-MAPBGA | NXP

The NXP MPXS3020VMS180 is a 32-bit dual-core automotive microcontroller from the PXS30 family, integrating two e200z7d cores running up to 180 MHz with 2 MB of on-chip Flash and 512 KB SRAM, housed in a 473-MAPBGA (19x19) package. Headline parameters are 180 MHz dual-core operation, 2 MB Flash, 512 KB SRAM, and a 473-ball MAPBGA package measuring 19 mm x 19 mm. The MPXS3020VMS180 is positioned as a high-performance variant in the PXS30 family; speed grades available include 150 MHz and 180 MHz variants sharing identical pinout. A microcontroller (MCU) is an integrated circuit that combines a CPU core, memory (Flash for program code, SRAM for runtime data), and a rich set of on-chip peripherals (timers, communication controllers, ADCs, GPIO) on a single die. The PXS30 family belongs to the broader power-architecture microcontroller taxonomy: e200z7d core -> Power Architecture MCU -> 32-bit automotive microcontroller -> embedded processing IC. The dual-core architecture provides asymmetric lockstep support for safety-critical applications where one core executes code while the second verifies operation in lockstep, enabling ISO 26262 ASIL-D capable systems when paired with the correct safety libraries. Key features include hardware security module (HSE) support for secure boot and cryptographic acceleration, dual e200z7d cores with FPU, a FlexRay communication controller for automotive networking, multi-channel CAN-FD interfaces, two Ethernet controllers (FEC), a 12-bit ADC with up to 48 channels, and a memory protection unit. The 473-MAPBGA package exposes the full peripheral set and supports external bus interfaces for SRAM, NOR Flash, and SDRAM expansion. The PXS30 architecture uses a superscalar e200z7d core with dual-issue capability and a single-precision FPU, achieving high Dhrystone MIPS performance per MHz. Dual cores can operate in either dual-core parallel mode for performance or lockstep mode for safety, with the chip's Error Correction Code (ECC) on Flash and SRAM enabling reliable operation in harsh automotive environments. The integrated crossbar switch provides simultaneous access to Flash, SRAM, and peripherals from both cores without contention. Typical applications include automotive electronic control units (ECUs), advanced driver assistance systems (ADAS) sensor fusion, chassis domain controllers, electric vehicle (EV) battery management systems (BMS), and industrial functional-safety controllers. The FlexRay and CAN-FD peripherals make the device particularly well-suited to chassis and powertrain networks, while the Ethernet MACs support modern zonal architectures. Design consideration: The 473-MAPBGA package requires at least a 4-layer PCB with microvia technology and a 0.8 mm ball pitch footprint; a thermal management strategy with multiple vias under the exposed pad is required to keep junction temperature within the automotive Grade 1 / Grade 2 limits. Power sequencing must follow the NXP reference manual to avoid internal block corruption during cold-boot. This page synthesizes distributor pricing, same-family and cross-family NXP drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
MSC7116VM1000 - 266MHz Fixed-Point DSP, 400-MAPBGA | NXP
MSC7116VM1000

MSC7116VM1000 - 266MHz Fixed-Point DSP, 400-MAPBGA | NXP

The NXP Semiconductors MSC7116VM1000 is a fixed-point Digital Signal Processor (DSP) in the StarCore SC1400 family, delivering 266 MHz core clock and 266 MIPS performance in a 400-pin MAP-BGA (17x17 mm) package. It integrates a single SC1400 DSP core, 192 Kbyte internal SRAM M1 memory, a 16-way 16 Kbyte instruction cache (ICache), and a four-entry write buffer. A DSP (Digital Signal Processor) is a specialized microprocessor optimized for numerical kernels such as FIR/IIR filters, FFTs, codecs, and modem baseband processing. The StarCore SC1400 architecture belongs to the broader hierarchy: fixed-point DSP -> DSP -> microprocessor -> SoC -> semiconductor. It targets deterministic, real-time signal pipelines where C compiler throughput and zero-overhead looping are critical. Key features of the MSC7116VM1000 include 400 Kbyte on-chip RAM, an 8 Kbyte ROM, an I/O voltage of 3.30 V, and a maximum core supply of 1.14 V. The device exposes a Host Interface, I2C, and UART for system integration. The 400-MAPBGA package supports high-speed parallel memory buses and the dedicated StarCore peripheral set required by telecom, audio, and industrial signal-processing designs. The architecture combines a dual-ALU SC1400 core with tightly-coupled SRAM, giving deterministic interrupt latency and predictable code execution. Compared with general-purpose microcontrollers, the SC1400 sustains 266 MIPS at low MHz, making the part attractive for cost-sensitive multi-channel audio, VoIP, and motor-control loops. Typical applications include VoIP gateways, multi-channel audio processing, industrial motor control, software-defined radio baseband, and embedded imaging pre-processing. Designers often pair the MSC7116VM1000 with external SDRAM, an Ethernet PHY, and a host microcontroller or PowerQUICC companion. When designing, ensure proper decoupling on both the 3.3 V I/O and 1.14 V core rails, and follow the MAP-BGA PCB layout guidelines for the 17x17 mm land pattern. Use a JTAG emulator that supports the StarCore SC1400 for code bring-up, and place the external memory as close as possible to the data bus pins. This page synthesizes distributor pricing from DigiKey and Octopart, drop-in alternatives from the same MSC711x family, and practical layout notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
MSC8122TVT4800V-FR - Quad SC140 DSP, 300MHz, 1.436MB SRAM | NXP
MSC8122TVT4800V-FR

MSC8122TVT4800V-FR - Quad SC140 DSP, 300MHz, 1.436MB SRAM | NXP

The NXP (formerly Freescale) MSC8122TVT4800V-FR is a highly integrated system-on-a-chip that combines four StarCore SC140 extended DSP cores with peripherals including an RS-232 serial interface, four time-division multiplexed (TDM) serial interfaces, thirty-two general-purpose timers, a flexible system interface unit (SIU), an Ethernet interface, and a multi-channel DMA controller, operating at up to 300 MHz in a 431-ball FCBGA package. A digital signal processor (DSP) is a specialized microprocessor whose architecture is optimized for the mathematical operations common in real-time signal processing: multiply-accumulate (MAC) loops, finite impulse response (FIR) filters, and Fast Fourier Transform (FFT) kernels. Within the broader taxonomy, the MSC8122 sits in the hierarchy: DSP -> embedded processor -> microprocessor -> integrated circuit -> semiconductor. Quad-core SC140 devices specifically target dense baseband workloads where parallel cores share memory and peripherals. Key features include 224 Kbytes of internal SRAM M1 memory per core (1436 Kbytes total across the four cores), a 16-way 16 Kbyte instruction cache (ICache), a four-entry write buffer, external cache support, and a programmable interrupt controller. The device supports 3.30 V I/O with a 1.10 V internal core voltage, allowing it to interface with external SDRAM, SRAM, and ROM memory without external level translation. From an architectural perspective, the SC140 core is a 16-bit fixed-point DSP with 32-bit extension, achieving high code density and deterministic interrupt latency. Four cores sharing a single 1.436 MB internal SRAM pool enable partitioning of baseband, vocoder, and packet-processing tasks in wireless infrastructure designs. The Ethernet MAC, four TDM ports, and UART collectively eliminate the need for several companion ASICs in legacy 2G/3G channel-card designs. Typical applications include wireless base station channel cards, voice-over-IP (VoIP) gateways, multi-channel modems, industrial multi-axis motion controllers, and high-density media transcoders. Per the Octopart comparison table, this part is matched against the MSC8144ETVT1000B (SC3400 core) and the MSC8101VT1250F (single-core SC140). When designing with this device, ensure the 1.10 V core supply rail is generated from a low-noise LDO such as TPS7A4701 or a synchronous buck converter with adequate bulk decoupling. The 431-ball FCBGA requires multi-layer PCB stack-up with buried vias and a minimum 4-layer board with continuous ground plane beneath the package for thermal dissipation. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and application guidance not found in the manufacturer datasheet alone, sourced from NXP, DigiKey, Octopart, and Avaq.

RFQ যোগাযোগ
MSC8254SAG1000B - Quad-Core SC3850 DSP 1GHz | NXP
MSC8254SAG1000B

MSC8254SAG1000B - Quad-Core SC3850 DSP 1GHz | NXP

The NXP (formerly Freescale) MSC8254SAG1000B is a high-performance quad-core digital signal processor (DSP) built on 45 nm process technology, integrating four StarCore SC3850 DSP subsystems each clocked at 1 GHz in a 783-ball FCPBGA package (29x29 mm). The device is part of NXP's StarCore MSC825x SoC family and delivers performance equivalent to a 4 GHz single-core implementation while maintaining a compact power envelope. What is a multi-core DSP? A digital signal processor (DSP) is a specialized microprocessor whose architecture is optimized for the fast numerical operations required by signal-processing workloads such as FIR/IIR filtering, FFT, modulation/demodulation, and baseband processing. Multi-core DSPs integrate two or more independent cores on one die, sharing a common memory hierarchy and interconnect, to multiply aggregate throughput without raising clock frequency. The MSC8254 sits in the taxonomy: DSP -> multi-core DSP -> StarCore family -> embedded communications SoC, typically deployed in wired/wireless baseband and media-processing infrastructure. Key features include four SC3850 cores, each with 32 KB L1 instruction cache and 32 KB L1 data cache, a unified 512 KB L2 cache configurable as M2 memory in 64 KB increments, an integrated memory management unit (MMU), an extended programmable interrupt controller (EPIC), and two general-purpose 32-bit timers per core. High-speed peripherals include DDR2/DDR3 memory controllers with ECC, two Gigabit Ethernet interfaces, two Serial RapidIO (SRIO) ports, two PCI Express interfaces, a QUICC Engine subsystem, and multiple TDM/HDI serial interfaces. The architecture combines the deterministic real-time DSP compute path with a rich control-plane I/O set, enabling the part to serve as a single-chip baseband or media-processing node. The 45 nm process and integrated peripherals eliminate external co-processors in many designs, reducing BOM cost and board area. Typical applications include wireless base station baseband processing, media gateway transcoding, radar signal processing, defense and aerospace DSP subsystems, and high-density channel cards in telecom infrastructure where the multi-core SC3850 compute density outperforms single-core legacy DSPs. When designing with the MSC8254, allocate thermal budget carefully: under maximum load the device can exceed 12 W dissipation, requiring a properly designed PCB thermal via array under the FCPBGA. Memory layout must respect the DDR2/DDR3 controller's fly-by topology to preserve signal integrity at 800 MT/s. This page consolidates distributor pricing, cross-reference alternatives, and design considerations not found in a single place in the manufacturer datasheet. All listed prices are accurate as of 2026-10-14.

RFQ যোগাযোগ
MSP430A001IPM - 16-Bit 8MHz MCU 16KB Flash | Texas Instruments
MSP430A001IPM

MSP430A001IPM - 16-Bit 8MHz MCU 16KB Flash | Texas Instruments

Texas Instruments MSP430A001IPM is a 16-bit RISC microcontroller featuring an 8 MHz operating clock, 16KB of flash program memory, and 512 bytes of RAM in a 64-pin LQFP (10 x 10 mm) package. The device is designed for embedded control applications where a compact processor, low-power operation, and integrated analog measurement can reduce the number of external components. A microcontroller is a programmable system-on-chip that combines a CPU core, nonvolatile program memory, working memory, and peripheral interfaces on one package. Within the embedded-control hierarchy, the MSP430A001IPM is a general-purpose 16-bit MCU within the MSP430 family. Its compact package and embedded resources make it suitable for controllers, measurement instruments, sensor nodes, and small industrial automation modules. Key device characteristics include a 16-bit MSP430 RISC core, 8 MHz maximum clock, 16KB flash memory, 512 bytes of RAM, and a 12-bit ADC. The 64-LQFP package provides 48 I/O lines according to product listings, offering more external connectivity than smaller MCU packages. Operation at 2.5 V or 3.3 V supports both lower-voltage and conventional 3.3 V embedded systems. The 16-bit architecture provides efficient handling of sensor data, control variables, and status information while retaining a relatively simple programming model. Flash memory retains firmware without a separate external program-memory device, and the integrated ADC supports applications that must measure analog inputs. With 512 bytes of RAM, the MCU is best suited to firmware that processes sampled values and manages peripherals without requiring a large display framebuffer or complex data structures. Typical uses include industrial sensor interfaces, compact environmental monitors, low-power measurement controllers, appliance control modules, and embedded data-acquisition systems. The 12-bit ADC is particularly useful in designs that convert physical inputs, such as temperature, pressure, or potentiometer positions, into digital values for control and monitoring. Designers should verify the exact pin allocation, power requirements, and peripheral availability in the manufacturer datasheet before laying out a PCB. Because the MSP430A001IPM uses a 64-pin LQFP footprint, routing should preserve access to all power pins and expose programming and debug signals. Decoupling capacitors should be placed close to the supply pins, while analog inputs should be routed away from fast-changing digital signals. This page combines the core device characteristics with package, sourcing, application, and design guidance. It also distinguishes verified device attributes from unresolved pin-level details, helping engineers assess the MSP430A001IPM before beginning a new embedded design.

RFQ যোগাযোগ
MSP430A002IPM - 16-Bit 8MHz MCU 32KB Flash | Texas Instruments
MSP430A002IPM

MSP430A002IPM - 16-Bit 8MHz MCU 32KB Flash | Texas Instruments

The Texas Instruments MSP430A002IPM is a 16-bit mixed-signal microcontroller with an 8 MHz MSP430 RISC core, 32 KB of Flash program memory plus 256 bytes, 1 KB of RAM, 48 I/O ports, and a 64-LQFP 10 mm × 10 mm package. Its stated operating supply range is 1.8 V to 3.6 V. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals into one device. The MSP430 belongs to the embedded microcontroller hierarchy and is designed to execute firmware, acquire measurements, control outputs, and manage communications in compact electronic systems. This particular MSP430x1xx device is positioned for low-power embedded control rather than high-performance computing. Key verified features include 32 KB of Flash memory, 1 KB of RAM, 48 I/O ports, a 12-bit ADC, and two USART interfaces. The 8 MHz clock provides a defined processing-rate reference for control loops and peripheral service, while the 1.8 V to 3.6 V supply range supports common low-voltage embedded rails. The industrial temperature grade and 64-terminal surface-mount package suit equipment where a conventional LQFP footprint is required. The MSP430 architecture is based on a 16-bit RISC core and integrates flash-backed firmware storage with on-chip RAM. Its mixed-signal and communications resources allow one device to handle sensor conditioning, control logic, and serial communications. Two USARTs can support asynchronous UART or synchronous SPI functions, although the exact peripheral routing and operating limits must be confirmed against the manufacturer datasheet and the selected board design. Typical uses include industrial instrumentation, data acquisition, embedded control, sensor-interface equipment, and communication-enabled low-power systems. The 48 I/O ports provide substantial external connectivity for discrete inputs and outputs, while the 12-bit ADC supports analog measurement channels. The two USARTs can reduce the need for separate interface controllers when the system architecture permits their shared use. When designing around MSP430A002IPM, verify the exact pin multiplexing, power requirements, clock configuration, ADC channels, and programming interface against the official 64-pin pinout. Use a PCB layout and decoupling arrangement that follows the manufacturer guidance. Because the verified data identifies the package as 64-LQFP (10x10), the library package key is lqfp-64 and the pinout must contain 64 entries. This page consolidates the verified distributor and manufacturer-related specifications, while clearly flagging details that were not supplied. It also distinguishes confirmed attributes from unavailable pin-level, pricing, compliance, and substitute information so engineers can make a traceable procurement and design decision.

RFQ যোগাযোগ
MSP430A018IPN - 16-Bit 8MHz MCU | Texas Instruments
MSP430A018IPN

MSP430A018IPN - 16-Bit 8MHz MCU | Texas Instruments

Texas Instruments MSP430A018IPN is a 16-bit mixed-signal microcontroller operating at up to 8 MHz, with 60 KB of Flash memory and 256 bytes of RAM in an 80-pin LQFP package measuring 12 mm by 12 mm. The device combines an RISC-based MSP430 architecture with mixed-signal peripherals for embedded control, sensor measurement, communication, and low-power instrumentation. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, input/output ports, and peripherals into one device. The MSP430 family belongs to the embedded processor and microcontroller hierarchy and is designed for compact control systems that need deterministic peripheral handling, efficient C-language development, and flexible low-power operation. The MSP430A018IPN is positioned for designs requiring more I/O and memory than the smallest MSP430 devices without moving to a larger general-purpose MCU architecture. The manufacturer identifies a 16-bit instruction set, an 8 MHz clock speed, 60 KB of Flash program memory, 256 bytes of RAM, and 48 I/O ports as principal device characteristics. Flash memory retains programmed firmware when power is removed, while RAM provides working storage for variables, stack operations, and interrupt-service routines. The 80-pin LQFP package exposes substantially more interface pins than smaller MSP430 packages and is suitable for boards requiring multiple analog or digital connections. The MSP430 architecture is based on a reduced instruction set computer design with a 16-bit register and address space. Its peripherals include USART capability for serial data links and mixed-signal resources for systems that combine digital control with sensor or analog signal conditioning. The operating-voltage range is 1.8 V to 3.6 V, making the device suitable for low-voltage embedded systems whose supply rails remain within that interval. The documented industrial temperature range is -40°C to +85°C. Typical uses include industrial sensor controllers, compact data-acquisition systems, building and automation controllers, communication equipment, and battery-operated instruments. In these systems, the MSP430A018IPN can execute control logic, supervise external sensors, manage digital inputs and outputs, and support serial connectivity while keeping the design in a single low-power MCU package. Designers should confirm the exact peripheral allocation and alternate-function mapping for every package pin in the manufacturer datasheet before laying out the PCB. Decoupling should be placed close to the supply pins, programming and debug access should remain serviceable, and unused I/O pins should be handled according to the device's stated requirements. The LQFP package also requires attention to thermal spreading on boards that expose the MCU to sustained high ambient temperatures. This product page combines the manufacturer's core device characteristics with practical selection guidance, package-focused comparison information, and engineering notes for embedded designers. It also identifies the limits of the available alternatives: a true drop-in replacement must retain the same 80-pin LQFP footprint, pin functions, memory organization, voltage range, and clock performance rather than merely providing similar mixed-signal functionality.

RFQ যোগাযোগ
MSP430A023IPM - 16-Bit 8MHz 8KB MCU | Texas Instruments
MSP430A023IPM

MSP430A023IPM - 16-Bit 8MHz 8KB MCU | Texas Instruments

Texas Instruments MSP430A023IPM is a 16-bit mixed-signal microcontroller with an 8 MHz operating frequency, 8 KB of flash memory organized as 8K x 8 plus 256 bytes, and a 64-LQFP package measuring 10 x 10 mm. It belongs to the MSP430x4xx family and is designed for compact embedded systems that require efficient control, low-power operation, and mixed-signal measurement capability. A mixed-signal microcontroller is an embedded processing device that combines a digital processor core with analog input or output functions. The MSP430 belongs to the microcontroller hierarchy, combining a reduced instruction set computer core, memory, timers, serial interfaces, and analog peripherals within one integrated circuit. This integration allows a product to sense, process, and control external variables without requiring several separate components. The MSP430A023IPM provides 8 KB of flash memory, 16-bit processing, and an 8 MHz clock. Its 64-LQFP package provides a comparatively high pin count for direct access to peripheral and interface functions. The 1.8 V to 3.6 V operating range supports low-voltage embedded equipment, while the flash memory allows firmware to be retained in the device itself. The exact RAM, analog-channel, timer, and serial-interface details should be confirmed in the manufacturer datasheet before assigning every peripheral function. The MSP430 architecture uses a 16-bit RISC core designed around efficient register-based operation and low-power embedded control. Its mixed-signal capabilities make the device suitable for applications that acquire analog measurements and apply digital control or communication. An 8 MHz clock provides a practical operating point for motor, meter, sensor-controller, and industrial-control designs that do not require a high-performance application processor. Typical uses include low-power sensing nodes, compact instrumentation, industrial control modules, appliance controls, and embedded systems that measure analog inputs and operate actuator or communication interfaces. The 10 x 10 mm LQFP format is especially useful for multilayer boards where a moderate pin count and exposed through-hole assembly are preferable to a very small leadless package. PCB implementation should follow the manufacturer pin and land-pattern guidance, including decoupling placement and exposed thermal-pad requirements where applicable. Firmware development should account for the selected clock source, watchdog behavior, analog reference arrangement, unused I/O handling, and reset requirements. This page combines device specifications, sourcing guidance, replacement criteria, and practical design considerations for engineers evaluating the MSP430A023IPM.

RFQ যোগাযোগ
MSP430A024IPM - 16-Bit 8MHz Low-Power MCU | Texas Instruments
MSP430A024IPM

MSP430A024IPM - 16-Bit 8MHz Low-Power MCU | Texas Instruments

The Texas Instruments MSP430A024IPM is a 16-bit mixed-signal microcontroller with an 8 MHz clock, 60 KB of flash memory including 256 bytes of information memory, and a 64-LQFP 10 x 10 mm package. It belongs to the MSP430x1xx family and is designed for low-power embedded control, sensor monitoring, data acquisition, and industrial instrumentation applications. An MSP430 mixed-signal microcontroller combines a reduced instruction set computer core, analog peripherals, digital I/O, and low-power sleep modes in one device. The MSP430A024IPM provides 60,000 bytes of flash program memory and 256 bytes of information memory, making it suitable for firmware, configuration data, calibration constants, and compact control algorithms. Its 16-bit RISC architecture supports efficient time-based and event-driven control. The principal device characteristics include an 8 MHz maximum clock, a 2.2 V operating supply specified for this ordering code, and a 64-LQFP package. The industrial temperature grade and square gull-wing package support robust assemblies where PCB space is available. Its integrated mixed-signal architecture reduces the need for separate analog interface components in measurement and control systems. MSP430A024IPM is particularly useful when energy efficiency, deterministic control, and compact firmware matter more than processing throughput. Low-power operating modes can extend service life in battery-operated instruments, while multiple timer, communication, and analog functions support autonomous sensing. The 8 MHz clock also provides sufficient performance for protocol handling, data filtering, status monitoring, and real-time control loops. Typical applications include industrial sensor transmitters, portable measurement equipment, environmental monitors, building-control nodes, industrial panel controls, and low-power embedded data loggers. In each case, the MCU can coordinate sensor inputs, perform local calculations, manage a communications interface, and place unused sections of the design into low-power states between events. PCB design should preserve the manufacturer's recommended decoupling and layout practices. Place the supply bypass capacitor close to the device power pins, route sensitive analog inputs away from switching nodes, and confirm the exposed thermal and assembly requirements of the 64-LQFP package before high-volume production. This product page combines manufacturer documentation references, package information, engineering-oriented application guidance, and same-family drop-in comparison information to support component selection, PCB planning, and procurement decisions.

RFQ যোগাযোগ
MSP430A025IPM - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments
MSP430A025IPM

MSP430A025IPM - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments

The Texas Instruments MSP430A025IPM is a 16-bit mixed-signal microcontroller operating at up to 8MHz, with 32KB of flash memory, 2KB of RAM, and a 64-LQFP package measuring 10mm by 10mm. It combines an embedded MCU with mixed-signal processing resources for compact control systems that require efficient local sensing, timing, and digital control. A mixed-signal microcontroller is a semiconductor device that integrates digital control functions with analog and peripheral resources. In the broader product hierarchy, the MSP430A025IPM is a microcontroller, an embedded processing IC, and a member of the semiconductor category. Its architecture is suited to industrial control, metering, instrumentation, and low-energy embedded systems where local computation must operate alongside analog signal acquisition and precise timing functions. Key device characteristics include a 16-bit processor, an 8MHz clock rating, 32KB of flash organized as 32K by 8 bits plus 256 bytes, 2KB of RAM, and two timers. The 64-LQFP package provides 64 gull-wing terminals and supports compact, surface-mounted PCB layouts. The industrial temperature grade supports applications across the industrial equipment range, while the mixed-signal designation supports designs that connect sensing, conversion, and control functions without relying on a separate discrete controller. The MSP430 platform centers on an integrated 16-bit RISC processing environment. Its flash memory provides nonvolatile program storage for firmware, while the 2KB RAM supports stack operations, data buffers, and working variables. The two timers can support periodic control tasks, event timing, or input-capture and output-comparison functions. Exact pin assignments, clock requirements, conversion characteristics, and peripheral limits should be confirmed against the manufacturer datasheet before PCB release. Typical applications include industrial panel meters, temperature-measurement instruments, portable diagnostic equipment, sensor-conditioning controllers, battery-powered monitors, and compact embedded control modules. The 8MHz processing ceiling supports responsive digital control, while the mixed-signal integration is useful when analog measurement and control logic must coexist within a small board area. A critical design step is to assign every terminal according to the 64-pin datasheet diagram and preserve the required decoupling and signal-routing practices. Confirm the selected analog and digital functions, exposed interfaces, operating voltage limits, clock configuration, and programming method before schematic and layout completion. This page combines the device specifications, application guidance, same-family drop-in options, and engineering design considerations needed to evaluate the MSP430A025IPM for a new embedded control design.

RFQ যোগাযোগ
MSP430A026IPM - 16-Bit 8MHz 60KB MCU | Texas Instruments
MSP430A026IPM

MSP430A026IPM - 16-Bit 8MHz 60KB MCU | Texas Instruments

The Texas Instruments MSP430A026IPM is a 16-bit mixed-signal RISC microcontroller with an 8 MHz clock, 60 KB flash memory and 2 KB RAM in a 64-LQFP 10 mm x 10 mm package. It also includes a 12-bit ADC, 256 bytes of information flash and support for 2.5 V and 3.3 V operation. These characteristics place it in the MSP430x1xx family of low-power embedded controllers for industrial sensing, instrumentation and compact control systems. A mixed-signal microcontroller is an embedded semiconductor that combines a digital processor core with analog peripherals. The processor executes firmware, while the ADC converts analog sensor signals into digital values for processing. In the broader hierarchy, this device is a microcontroller, an embedded processing IC and a mixed-signal system-on-chip designed to reduce the number of separate components required in measurement and control equipment. The MSP430A026IPM provides 60 KB of flash for firmware and constants, 2 KB of RAM for working data and 256 bytes of information flash for configuration or identification data. Its 16-bit RISC architecture, 8 MHz maximum clock and 12-bit ADC support responsive acquisition while keeping the device focused on embedded control rather than high-performance computing. The 64-LQFP package also provides more I/O and analog connectivity than smaller microcontroller packages. The MSP430 architecture is associated with low-power embedded designs because it can retain state in RAM and react to interrupt-driven events. This is useful in systems that spend substantial time waiting for sensors, operator input or scheduled events. Exact standby current, active current, timer channels, I/O count and operating-temperature limits must be confirmed in the manufacturer datasheet before final power-budget or safety qualification. Typical uses include industrial process monitoring, portable instrumentation, low-power sensor acquisition, digital panel equipment and low-speed control loops. The 12-bit ADC is especially relevant to temperature, level, pressure and current sensing, while the 60 KB flash capacity accommodates more application code than many entry-level MSP430 variants. The 64-pin package is useful when a design needs both analog inputs and a broad set of general-purpose digital interfaces. PCB implementation should follow the manufacturer land pattern and pin-description table exactly. Place the required decoupling capacitors close to their designated supply pins, route sensitive analog inputs away from switching nodes and high-current outputs, and provide a continuous ground reference beneath the device. Confirm which pins are multiplexed for ADC functions before assigning analog channels in the PCB schematic. This product page combines the confirmed memory, speed, ADC, voltage and package characteristics with practical design guidance, application fit, sourcing information and a focused comparison against verified same-family alternatives. It is intended to help engineers identify whether the MSP430A026IPM matches the required embedded-control architecture before moving to detailed datasheet verification.

RFQ যোগাযোগ
MSP430A048IPM - 16-Bit 8MHz MCU | Texas Instruments
MSP430A048IPM

MSP430A048IPM - 16-Bit 8MHz MCU | Texas Instruments

Texas Instruments MSP430A048IPM is a 16-bit ultra-low-power mixed-signal microcontroller operating at up to 8 MHz, with 8 KB of flash memory, 256 bytes of RAM, and a 64-LQFP 10 x 10 mm package. According to the manufacturer datasheet, it also integrates a comparator and supports up to 96 LCD segments. The combination of a 16-bit CPU, mixed-signal peripherals, segmented LCD drive capability, and compact package makes the device suitable for compact, low-power instruments, meters, industrial control panels, and embedded measurement systems. A mixed-signal microcontroller is an embedded processing device that combines a digital CPU and program memory with analog and communication peripherals on one chip. The MSP430A048IPM belongs to the MSP430 mixed-signal microcontroller family. Its low-power architecture is designed for systems that spend much of their operating time measuring, displaying information, responding to inputs, or waiting between user actions. Rather than continuously executing computationally intensive work, an MSP430-based product can use low-power operating modes to reduce energy consumption. The device provides 8 KB of flash memory organized as 8K x 8 plus an additional 256 bytes, together with 256 bytes of RAM. Its 16-bit processing architecture supports efficient control operations while operating at up to 8 MHz. Integrated analog resources include a comparator, while the LCD capability can drive as many as 96 segments. These functions reduce the need for separate display drivers and analog interface components in suitable panel-based designs. Exact supply voltage, current, timing, and peripheral details should be confirmed in the manufacturer datasheet before circuit design. The MSP430A048IPM is particularly relevant to low-power mixed-signal products because the CPU, flash, RAM, comparator, and LCD interface are integrated in one device. The 64-LQFP package provides 64 available package positions and is larger than the smallest packages in the MSP430 portfolio, making it practical where adequate component spacing, test access, and manual assembly are priorities. Because no complete pin-description table appears in the product listings, the package drawing should be checked against the manufacturer datasheet before assigning tracks or test points. Typical uses include compact digital multimeters, panel meters, portable environmental monitors, industrial measurement instruments, and human-machine-interface controllers. The LCD segment capability is particularly useful for dedicated numerical displays, while the comparator can support threshold detection, signal conditioning, or basic control functions. In a portable meter, the MCU could acquire a sensor signal, evaluate it, update a segmented display, and enter a low-power state between measurement events. Firmware and peripheral selection must be checked against the complete device documentation. A key design consideration is the balance between memory capacity and functionality. With 8 KB of flash and 256 bytes of RAM, this MCU is intended for compact control code rather than large buffers, complex graphical interfaces, or heavy connectivity stacks. Designers should reserve flash for interrupt handlers and time-critical routines, avoid unnecessary RAM copies, and validate every peripheral configuration against the datasheet. The 64-LQFP footprint also requires a PCB land pattern and pin assignment based on the official package drawing. This product page combines the exact manufacturer and distributor identity, memory and packaging details, comparator and LCD capabilities, application guidance, and a conservative replacement assessment. It separates confirmed device characteristics from parameters that require direct datasheet review, helping engineers plan a mixed-signal design while reducing the risk of assuming unverified pin or electrical details.

RFQ যোগাযোগ
MSP430A051IPM - 8MHz 16-Bit MCU | TI | Embedded Control
MSP430A051IPM

MSP430A051IPM - 8MHz 16-Bit MCU | TI | Embedded Control

Texas Instruments MSP430A051IPM is a 16-bit ultra-low-power microcontroller with an 8 MHz operating frequency, 16 KB of flash memory, 512 bytes of RAM, a 12-bit ADC, and a 64-pin LQFP package measuring 10 mm by 10 mm. It combines a compact RISC processor, mixed-signal peripherals, and low-power operation for embedded sensing, measurement, and control systems. An ultra-low-power microcontroller is a semiconductor designed to complete control tasks while consuming very little electrical power. The MSP430 belongs to the broader hierarchy of embedded microcontroller, processor, and semiconductor devices. Its architecture supports event-driven execution, allowing software to remain in a low-power state until a timer, comparator, serial-interface event, or external interrupt requires service. Key features include 16 KB of flash memory for program storage, 512 bytes of RAM for working data, and a 12-bit analog-to-digital converter for sensor and analog-voltage measurements. A USART supports serial communication with sensors, displays, data loggers, and host systems. The stated 1.8 V to 3.6 V operating range supports low-voltage embedded designs, while the -40°C to +85°C temperature range covers industrial-temperature environments. The MSP430A051IPM combines a 16-bit RISC core with integrated mixed-signal resources in one 64-LQFP device. Flash memory supports in-circuit programming and firmware retention, while RAM provides space for stack operations, acquisition buffers, and control variables. The 8 MHz clock provides a practical balance between instruction throughput, active current, and the ability to remain idle between events. Typical applications include battery-powered sensor nodes, industrial measurement instruments, compact data loggers, building and access-control modules, and low-power monitoring equipment. The 12-bit ADC is especially useful when the design must acquire analog inputs without adding a separate converter. The USART can connect the controller to external sensors or a host processor using a documented serial protocol. PCB design should preserve short analog and power paths, with the device ground and analog reference connections following the pin-description table in the manufacturer datasheet. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from switching nodes, and include programming access for the supported flash-programming interface. Verify unused-pin handling and termination requirements before releasing the layout. This page combines operating characteristics, family-level replacement options, package guidance, application analysis, and practical PCB design notes to support faster component selection, firmware planning, and hardware bring-up.

RFQ যোগাযোগ
MSP430A064IPM - 16-Bit 8MHz MCU with 48KB Flash | TI
MSP430A064IPM

MSP430A064IPM - 16-Bit 8MHz MCU with 48KB Flash | TI

Texas Instruments MSP430A064IPM is a 16-bit RISC microcontroller built for low-power embedded control, with an 8 MHz operating speed, 48 KB of flash memory including 256 bytes, 2 KB of RAM, and a 64-pin LQFP package. The device belongs to the MSP430 family of mixed-signal microcontrollers and combines a 12-bit ADC, two USARTs, and a hardware multiplier in a compact industrial-temperature component. An MSP430 microcontroller is a mixed-signal embedded-processing device designed to measure, control, and communicate while operating with low energy consumption. The MSP430 architecture integrates a 16-bit RISC core, analog conversion, timing, serial communication, and GPIO resources on one chip. Within the broader semiconductor hierarchy, it is a microcontroller, embedded processor, and mixed-signal IC intended to replace combinations of discrete analog and digital components in compact embedded systems. The MSP430A064IPM provides 48 KB of flash for firmware, 2 KB of RAM for working data, and an 8 MHz maximum operating frequency. Its 12-bit ADC supports embedded measurement functions, while two USARTs provide serial communication channels for sensors, external converters, programming equipment, or data acquisition systems. The hardware multiplier supports efficient multiplication in control and signal-processing routines, and the 64-LQFP package exposes a broad set of I/O and peripheral connections. The part is identified for industrial-temperature operation from -40°C to +85°C and operates from 2.2 V to 3.3 V according to the product listing information. A 64-pin gull-wing LQFP package supports conventional surface-mount assembly while providing more external pins than smaller MSP430 packages. The combination of flash memory, RAM, ADC channels, serial interfaces, and a maximum 8 MHz clock makes the device suitable for compact control systems that need local sensing and communications without a higher-power processor. Typical applications include industrial sensor nodes, low-power data loggers, building automation endpoints, battery-operated measurement instruments, motor and process control, and embedded communications equipment. The two USARTs can manage multiple serial links, while the ADC can acquire analogue sensor inputs without requiring a separate converter. Software should budget memory carefully because the 48 KB flash and 2 KB RAM are sufficient for focused control tasks rather than demanding graphical interfaces or large data buffers. Design the PCB with short analogue input routes, adequate bypassing at the power pins, and careful grounding around the ADC. Confirm the exact pin functions and multiplexing constraints against the manufacturer pin description before assigning signals. Programme the device with a toolchain compatible with the MSP430 architecture, and validate clock, analogue, serial, and low-power settings across the intended temperature range. This page organizes the verified technical characteristics, pin-package details, sourcing information, drop-in alternatives, comparison parameters, and practical design guidance for engineers evaluating the MSP430A064IPM. It also distinguishes exact ordering information from broader MSP430 family options, helping designers assess PCB reuse, firmware portability, peripheral requirements, and supply continuity before committing a design.

RFQ যোগাযোগ
MSP430A079IPN - 16-Bit 8 MHz MCU | Texas Instruments
MSP430A079IPN

MSP430A079IPN - 16-Bit 8 MHz MCU | Texas Instruments

Texas Instruments MSP430A079IPN is a 16-bit embedded microcontroller with an 8 MHz maximum clock frequency, 48 KB of flash memory organized as 48K x 8, and 256 bytes of additional memory, supplied in an 80-pin LQFP package measuring 12 x 12 mm. The device belongs to the MSP430 mixed-signal microcontroller family and combines a low-power RISC-style embedded architecture with integrated mixed-signal resources for measurement and control applications. An MCU is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and I/O in one package. Within the embedded-control hierarchy, the MSP430A079IPN sits between a general-purpose microprocessor and a fixed-function logic device. Its 16-bit architecture provides a practical balance of processing capability, memory capacity, and compact embedded control, while the mixed-signal family is commonly used where analog measurements and digital control must share one system. The three principal headline specifications are an 8 MHz operating speed, 48 KB of flash program memory, and an 80-pin LQFP footprint. The flash memory can retain firmware without a separate external program-memory device, while the 80-pin package provides substantially more I/O and peripheral connectivity than a small 8-pin or 16-pin microcontroller package. The manufacturer describes the part as an MSP430x4xx-series MCU with 48K x 8 flash and 256 bytes of additional memory. The device architecture supports embedded acquisition, monitoring, and control rather than general-purpose desktop computing. Its analog and digital resources are intended to reduce the number of external components in instrumented systems, while its 16-bit datapath provides useful precision for control calculations. Exact peripheral assignments, timer resources, converter performance, clock limits, and electrical ratings should be taken from the pin-description table and electrical-characteristics tables in the Texas Instruments MSP430A079IPN datasheet. Typical application areas include industrial sensor modules, compact data-acquisition equipment, building-control interfaces, portable instrumentation, and low-power embedded monitoring devices. The 48 KB embedded flash capacity is useful for moderate firmware sizes, while the 12 x 12 mm LQFP package supports conventional surface-mount assembly and a generous pin count for external sensors, displays, communications, and actuators. PCB design should begin with the manufacturer pin-description table, decoupling requirements, clock configuration, and exposed thermal-pad guidance. Confirm every signal, supply pin, analog reference, and programming connection against the exact IPN package before layout release; similar MSP430 family members can differ in pin availability and peripheral multiplexing. This page consolidates the confirmed 16-bit architecture, 8 MHz clock rating, 48 KB flash configuration, 256-byte memory feature, 80-LQFP packaging, sourcing information, pinout considerations, and replacement guidance to support faster engineering and procurement evaluation.

RFQ যোগাযোগ
MSP430A095IPN - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments
MSP430A095IPN

MSP430A095IPN - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments

Texas Instruments MSP430A095IPN is a 16-bit mixed-signal microcontroller with an 8 MHz operating speed, 48 KB of flash program memory, and 48 general-purpose I/O pins in an 80-LQFP 12 x 12 mm package. It integrates SPI, UART/USART, brown-out detection and reset, DMA, an LCD interface, power-on reset, PWM, and a watchdog timer for compact embedded control systems. A mixed-signal microcontroller combines a digital processing core with peripherals that acquire, process, or control mixed analog and digital signals. The MSP430 architecture belongs to the microcontroller hierarchy and is commonly used as a low-power embedded controller, while its integrated peripherals reduce the need for separate support devices. MSP430A095IPN is designed for designs that require more I/O and flash capacity than smaller members of the MSP430 family. The device's 16-bit RISC core operates at up to 8 MHz, providing a practical balance between processing throughput, power consumption, and design simplicity. Its 48 KB flash memory supports firmware, constants, and configuration data, while the integrated peripheral set supports communication, timing, and mixed-signal control tasks. Forty-eight I/O pins give a board designer substantial connectivity without requiring a larger package. Communication and control resources include SPI and UART/USART interfaces, direct-memory-access support, multiple PWM channels, a watchdog timer, power-on reset, and brown-out detection with reset. The LCD interface expands the range of display-based instruments that can be implemented directly. Together, these blocks reduce external component count in sensor nodes, measurement systems, industrial controls, and compact embedded products. Typical applications include low-power sensor acquisition, industrial monitoring, portable measurement instruments, connected control modules, and embedded products that combine serial communication with LCD feedback. The 48 KB flash capacity allows a meaningful firmware footprint, while 48 I/O pins support buttons, indicators, sensors, actuators, and logic interfaces. The mixed peripheral set is particularly useful when board area and component count are important constraints. PCB design should preserve clean power distribution and short, controlled signal paths around the MCU. Place decoupling capacitors close to the supply and ground pins, route sensitive analog and communication lines away from fast-switching nodes, and follow the manufacturer package and layout guidance in the MSP430A095IPN datasheet. Confirm the pin assignment, exposed-pad requirements, voltage limits, and decoupling values for the exact board configuration before release. This product page combines the MSP430A095IPN core specifications, package details, application guidance, drop-in replacement options, and practical design considerations in one engineering-focused reference. It helps designers evaluate whether the device's 8 MHz processing speed, 48 KB flash memory, 48 I/O pins, and integrated mixed-signal peripherals align with a new embedded-control design.

RFQ যোগাযোগ
MSP430A155IPZ - 16-Bit 25MHz 64KB MCU | Texas Instruments
MSP430A155IPZ

MSP430A155IPZ - 16-Bit 25MHz 64KB MCU | Texas Instruments

The Texas Instruments MSP430A155IPZ is a 16-bit embedded microcontroller with a 25 MHz CPU, 64 KB of flash program memory, and a 100-LQFP package measuring 14 x 14 mm. Its MSP430F6xx family positioning combines low-power embedded control with 72 I/O pins and connectivity including I2C, IrDA, LIN bus, SCI, SPI, and UART/USART. A microcontroller is a semiconductor that integrates a processor core, nonvolatile program memory, data memory, I/O ports, and peripherals on one device. In the product hierarchy, the MSP430A155IPZ is a 16-bit RISC-based MCU within the MSP430 family and the broader embedded-controller category. It executes firmware from flash while using integrated communication, timing, watchdog, brown-out, DMA, LCD, and PWM resources. Key verified features include 64 KB of flash organized as 64K x 8, a 16-bit core, operation up to 25 MHz, and 72 I/O pins. The connected peripherals include I2C, IrDA, LIN bus, SCI, SPI, and UART/USART. Additional listed resources include brown-out detection and reset, DMA, an LCD interface, power-on reset, PWM, and a watchdog timer. These peripherals reduce the need for discrete interface components in connected embedded systems. The MSP430 architecture provides an RISC processor core identified as CPUXV2 in the supplied technical summary. Its 25 MHz operating speed gives it substantially more processing headroom than lower-frequency 8-bit control devices, while the 16-bit instruction and data path is well suited to compact control firmware. Because detailed clock, RAM, voltage, timing, and electrical limits were not included in the verified source text, they should be confirmed against the manufacturer datasheet before design release. Typical uses include industrial sensor controllers, LIN-connected nodes, serial bridges, low-power data loggers, compact motor or actuator controllers, and communications modules. The broad interface set permits connection to sensors, displays, transceivers, and external storage while the LCD and PWM resources support local human-interface and output-control functions. The primary design consideration is pin planning across the 100-LQFP footprint. Designers should preserve the MSP430A155IPZ power, ground, decoupling, programming, reset, crystal, and peripheral assignments shown in the official pinout. Because this is a 14 x 14 mm gull-wing package, PCB routing needs adequate escape space and assembly clearance. This page consolidates the verified distributor specifications, sourcing information, application context, and compatibility limits for MSP430A155IPZ. It also distinguishes confirmed specifications from data that still requires datasheet-level engineering verification.

RFQ যোগাযোগ
MSP430F110IDW - 16-Bit 8 MHz MCU | Texas Instruments
MSP430F110IDW

MSP430F110IDW - 16-Bit 8 MHz MCU | Texas Instruments

The Texas Instruments MSP430F110IDW is a 16-bit RISC mixed-signal microcontroller with an 8 MHz maximum clock, 1 KB of flash program memory, 128 bytes of RAM, and a 20-pin SOIC package. Its low-supply-voltage design operates from a 3.6 V maximum supply, making it suitable for compact, low-power embedded systems that require deterministic control and mixed-signal measurement capabilities. A mixed-signal microcontroller combines a digital microprocessor core with analog and timing peripherals on one integrated device. The MSP430 belongs to the broader hierarchy of embedded processor, microcontroller, and semiconductor categories. Its 16-bit RISC architecture supports efficient instruction execution, while the integrated clock, memory, and mixed-signal peripherals reduce the number of discrete components required in a measurement or control design. Key characteristics include an 8 MHz clock capability, a 125 ns instruction-cycle time, 1 KB of flash memory organized as 1K x 8 plus 128 bytes of RAM, and a 3.6 V maximum low-supply voltage. The device also supports standby and low-power off operation, including a stated 0.1 µA off current with RAM retention. These characteristics make it useful for low-duty-cycle sensing, control, metering, and embedded measurement systems. The MSP430 architecture emphasizes efficient mixed-signal system design through its basic clock module, 16-bit RISC processing, and integrated low-power operating modes. Its 128-byte RAM supports stack, variables, and short working data sets, while flash provides nonvolatile program storage. At an 8 MHz maximum clock, the stated 125 ns instruction-cycle time corresponds to a fast instruction execution rate, allowing the core to service timing-sensitive peripheral operations without an external processor. Typical applications include low-power sensor nodes, compact industrial measurement instruments, battery-operated monitoring equipment, digital meters, and embedded control modules. The MSP430F110IDW can also serve as the central controller in designs where compact package size, low standby demand, and integrated analog measurement functions matter more than large memory capacity or extensive connectivity. Designers should verify the exact pin assignment and peripheral multiplexing in the Texas Instruments MSP430F110 datasheet before laying out a PCB. Because the device provides only 1 KB of flash and 128 bytes of RAM, firmware must remain compact, interrupt service routines should be efficient, and application code must avoid unnecessary buffering. The 20-pin SOIC footprint simplifies assembly but requires careful assignment of communication, analog, clock, and debug functions among the available pins. This product page combines the exact MSP430F110IDW device identity, package and memory details, verified pricing channels, replacement assessment, and practical design guidance. It also highlights where similarly named MSP430 devices share the 20-pin SOIC footprint and where their available functions and memory resources must be checked before a replacement is approved.

RFQ যোগাযোগ
MSP430F110IPW - 8MHz 16-Bit MCU | TI | Embedded Control
MSP430F110IPW

MSP430F110IPW - 8MHz 16-Bit MCU | TI | Embedded Control

The Texas Instruments MSP430F110IPW is an ultra-low-power 16-bit RISC microcontroller with an 8MHz maximum clock, 1KB of Flash memory, 128 bytes of RAM, and a 20-pin TSSOP package. It is designed for compact embedded products where low supply voltage, fast wake-up, and multiple low-power operating modes are important. A microcontroller is a programmable semiconductor that integrates a CPU, memory, I/O, timers, and other peripherals on one device. The MSP430 belongs to the embedded-processing hierarchy: MCU → 16-bit RISC microcontroller → ultra-low-power embedded controller. Its reduced instruction set, 16-bit registers, and 125ns instruction-cycle time support deterministic control operations in portable measurement and low-energy sensor systems. The MSP430F110IPW combines 1KB of Flash for program storage with 128 bytes of RAM for working data. Its Basic Clock Module supports clock selection needed by portable systems, while its integrated peripherals reduce external component count. The device operates from a low supply voltage range with a stated 3.6V value and is specified in a 20-pin TSSOP package for surface-mount assembly. Ultra-low-power operation is central to the architecture. The MSP430 family supports five low-power modes optimized for extended battery life. The documented off-state retention current is 0.1µA, and the device can wake from standby to resume measurement or control activity. This combination of low voltage, low-power states, and rapid wake-up is more important than peak processing throughput in many portable applications. Typical uses include battery-powered meters, compact environmental sensors, handheld instrumentation, simple control panels, and low-duty-cycle embedded nodes. The 128-byte RAM is suitable for compact working sets, while the 1KB Flash capacity is best matched to focused control logic rather than large buffers or demanding human-interface firmware. The 8MHz clock also allows the CPU to complete periodic measurement and signal-processing tasks between extended standby intervals. Designers should budget memory before committing to application code, ensure firmware fits the 1KB Flash and 128-byte RAM limits, and plan decoupling and PCB layout around the TSSOP footprint. Verify the complete pin description, operating limits, clock setup, and low-power-mode conditions in the manufacturer datasheet before a new board is released. This product summary connects the MSP430F110IPW's memory, clock, power-management, package, and sourcing characteristics with practical design guidance. It also distinguishes verified same-family alternatives from replacements that would require a different footprint or software review.

RFQ যোগাযোগ
MSP430F112IDW - 8MHz 16-Bit MCU, 4KB Flash | Texas Instruments
MSP430F112IDW

MSP430F112IDW - 8MHz 16-Bit MCU, 4KB Flash | Texas Instruments

The Texas Instruments MSP430F112IDW is an 8 MHz, 16-bit mixed-signal microcontroller with 4KB Flash memory, 256B SRAM, timer and comparator resources, housed in a 20-pin SOIC package. The device is positioned for compact embedded control applications requiring a low-power MCU, deterministic timing and mixed-signal peripheral integration. DigiKey identifies the part as an MSP430 CPU16 microcontroller with MSP430x1xx architecture, 4KB Flash, 256B RAM and 8MHz operation. A microcontroller is a programmable system-on-chip that combines a processor core, memory, digital I/O and peripherals in one integrated component. The MSP430 family uses a 16-bit RISC-oriented embedded-control architecture within the broader semiconductor and embedded-systems hierarchy. Its small memory footprint and low-power design make it suitable for battery-operated instruments, simple control panels, sensor nodes and compact embedded products where cost, board area and energy efficiency matter more than high compute throughput. The available verified data identifies an 8MHz maximum clock, 4KB Flash, 256B SRAM, a timer and a comparator. The 256B SRAM figure is also represented in the distributor description as 4K x 8 plus 256B, indicating memory-oriented catalog information rather than a high-capacity application MCU. The 20-SOIC package supports conventional surface-mount assembly and is compatible with PCB layouts requiring a 20-pin SOIC footprint. The exact pin names, electrical limits, supply voltage, current consumption and timing parameters are not present in the supplied search results and are therefore not inferred here. Typical design uses include low-power sensor acquisition, simple industrial control, battery-powered monitoring, compact instrumentation and embedded control subsystems. The comparator can support threshold-based signal conditioning or simple decision logic, while the timer supports periodic measurement, timing and control functions. Firmware selection should be checked against the device’s exact memory map and peripheral implementation before production release. A key design consideration is to verify the complete pinout, supply limits, clock configuration and peripheral multiplexing against the manufacturer datasheet rather than relying only on distributor catalog summaries. This page distinguishes verified manufacturer/distributor facts from unspecified parameters and avoids presenting guessed electrical values as production specifications. This page consolidates verified manufacturer and distributor information, practical application context, comparison fields and design cautions. It also preserves unresolved electrical details as data-needed markers so engineers can verify them before schematic release or PCB sign-off.

RFQ যোগাযোগ