মাইক্রোকন্ট্রোলার

পণ্য (20,000+)

PIC16C54-XTI/SS - 8-bit OTP MCU, 0.75KB, 12 I/O, SSOP-20 | Microchip
PIC16C54-XTI/SS

PIC16C54-XTI/SS - 8-bit OTP MCU, 0.75KB, 12 I/O, SSOP-20 | Microchip

The Microchip Technology PIC16C54-XTI/SS is a 8-bit EPROM/ROM-based CMOS microcontroller from the PIC16C5X family, packaged in a 20-pin SSOP (SS) with industrial temperature rating. The -XTI suffix denotes an extended (4 MHz) speed grade, industrial temperature range (-40C to +85C), and the /SS package code designates the SSOP-20 surface-mount form factor. It integrates 0.75 KB of program memory, 25 bytes of RAM, and 12 digital I/O pins. An 8-bit microcontroller (MCU) is a small computer-on-a-chip containing a CPU, memory, and peripherals, designed for embedded control tasks. Within the semiconductor taxonomy, the PIC16C54 belongs to the hierarchy: 8-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. RISC-based MCUs like the PIC16C5X use a small, fixed-length instruction set to deliver predictable, deterministic execution — well-suited to real-time control loops where instruction-cycle timing must be known exactly. Key features include a RISC architecture with 33 single-word/single-cycle instructions, 12-bit-wide instruction words with 8-bit-wide data path, two-level deep hardware stack, and direct/indirect/relative addressing modes. The device integrates an 8-bit real-time clock/counter (TMR0), a watchdog timer (WDT) for runaway-code recovery, and power-on reset (POR) circuitry. Its fully static CMOS design allows the clock to be stopped without losing register state, enabling low-power standby strategies in battery-powered applications. The PIC16C5X family is fabricated on an OTP (one-time-programmable) EPROM process, which differentiates it from flash-based PIC16F successors. The 'C' in PIC16C54 indicates the EPROM-based windowed/OTP variant. The -XT speed grade corresponds to a 4 MHz maximum oscillator frequency. Because OTP memory cannot be erased electrically, this part is typically used in mature, high-volume products where code revision is finalized. Typical applications include appliance control, automotive body modules, industrial sensor interfaces, low-end remote controls, and small consumer devices requiring deterministic loop execution. Its 12 I/O pins, hardware stack, and single-cycle instruction set make it appropriate for simple state-machine and timing-critical control tasks. Pairing the MCU with the PICkit 1 or MPLAB PM3 programmer enables development and pre-production programming. When designing with this part, allocate sufficient decoupling (100 nF ceramic) close to VDD, and ensure the MCLR pull-up is correctly biased. Because the SSOP-20 has limited thermal mass, confirm that industrial-temperature operation (-40C to +85C) is observed when the device is used in enclosed enclosures. For new designs, consider PIC16F54 flash-based drop-in alternatives that allow in-circuit re-programming. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical SSOP-20 design notes that go beyond the bare manufacturer datasheet, helping engineers evaluate the PIC16C54-XTI/SS for both legacy maintenance and new design reuse.

RFQ যোগাযোগ
PIC16C54/JW - 4MHz 8-Bit OTP EPROM MCU | Microchip | 18-CERDIP
PIC16C54/JW

PIC16C54/JW - 4MHz 8-Bit OTP EPROM MCU | Microchip | 18-CERDIP

The Microchip Technology PIC16C54/JW is a 4MHz 8-bit EPROM-based RISC microcontroller in an 18-pin CERDIP (windowed) package. It integrates 768 bytes (512 x 12) of one-time-programmable (OTP) EPROM program memory, 25 bytes of RAM, and 12 digital I/O pins, all built around Microchip's PIC16C5X family architecture. The PIC16C54 belongs to the classic PIC16C5X family of low-cost, high-performance 8-bit fully-static EPROM/ROM-based CMOS microcontrollers. It uses a RISC architecture with only 33 single-word/single-cycle instructions, providing a 2:1 code compression advantage over competing 8-bit MCUs in its class. A PIC16C5X device is a member of the broader PIC (Peripheral Interface Controller) family, which is a type of microcontroller (MCU) — a small computer-on-a-chip containing CPU, memory, and I/O peripherals on a single integrated circuit. Within that hierarchy, the PIC16C54 is a 'low-end' baseline MCU aimed at simple embedded control tasks. Key features of the PIC16C54/JW include a 12-bit instruction word with an 8-bit data path, two-level deep hardware stack, direct/indirect/relative addressing modes, an 8-bit real-time counter (TMR0), and a 4MHz maximum clock frequency. It supports 4.5V to 5.5V supply operation, a watchdog timer, power-on reset, and 12 CMOS-compatible bidirectional I/O lines. The 'JW' suffix denotes the ceramic CERDIP package with an ultraviolet-erasable window, which allows engineers to erase and re-program the device multiple times during prototyping. From an architectural standpoint, the PIC16C54/JW is built on Microchip's baseline PIC core, which executes one instruction per clock cycle (no pipeline stalls on instruction fetches thanks to Harvard architecture separation of program and data memories). The 12-bit instruction width reflects the baseline PIC's emphasis on compact code rather than register-rich operation. The two-level hardware stack is intentionally shallow, which constrains subroutine nesting depth but keeps the device deterministic for interrupt-free control loops. Typical applications for the PIC16C54/JW include industrial control logic, simple sensor interfaces, consumer appliance controllers, automotive subsystems (pre-CAN), and legacy embedded systems. It is particularly suited to low-cost, low-power applications where a small instruction set, small memory footprint, and proven long-term availability are valued. The windowed CERDIP package is used during development and field upgrades; for production, the OTP plastic variants (PIC16C54-04/P, PIC16C54-10/P) are preferred. When designing with the PIC16C54/JW, engineers must note that the 4MHz maximum clock rate limits it to roughly 1 MIPS of throughput, and the 2-level hardware stack restricts nested subroutines to two levels. Erasure of the windowed CERDIP package requires a UV EPROM eraser (approximately 20 minutes of high-intensity UV exposure) before re-programming. For new designs, Microchip recommends the modern PIC16F54 flash-memory successor as a pin-compatible migration path. This page synthesizes distributor availability, same-family drop-in alternatives, and practical UV-EPROM design notes not found on a single manufacturer page.

RFQ যোগাযোগ
PIC16C54A-04/P - 8-bit OTP MCU, 4MHz, 768B | Microchip
PIC16C54A-04/P

PIC16C54A-04/P - 8-bit OTP MCU, 4MHz, 768B | Microchip

The Microchip Technology PIC16C54A-04/P is an 8-bit EPROM/ROM-based CMOS microcontroller from the PIC16C5X family, delivering 4 MIPS performance at 4 MHz clock speed in an 18-pin PDIP through-hole package. It integrates 768 bytes (512 x 12) of one-time-programmable (OTP) program memory, 25 bytes of RAM, and 12 digital I/O pins, all on a RISC core with 33 single-word single-cycle instructions. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile program memory, and peripherals on one die. The PIC16C5X family belongs to the broader 8-bit MCU class within the microcontroller hierarchy: microcontroller -> 8-bit MCU -> RISC MCU -> EPROM/ROM-based MCU -> OTP MCU. These devices serve as low-cost embedded controllers in cost-sensitive applications that do not require reprogrammability, occupying the entry-level tier alongside the contemporary PIC16F series and competing with 8051 derivatives. Key features of the PIC16C54A-04/P include a 4 MHz maximum operating frequency (the "-04" speed grade), 12-bit wide instructions for 2:1 code compression over competing 8-bit architectures, an 8-bit real-time clock/counter (TMR0), and a two-level deep hardware stack. Power consumption is optimized at 4.5V to 5.5V supply, and the device includes an internal power-on reset, watchdog timer (on selected die revisions), and a sleep mode for low-power standby. The 12 I/O pins can each drive source/sink currents suitable for LED and small-signal relay control. Architecturally, the PIC16C54A employs a Harvard RISC design with separate program and data buses, enabling single-cycle instruction execution except for program branches (which take two cycles). The OTP EPROM cell is one-time-programmable, meaning the part is intended for low-to-medium volume production after code is finalized. The four-digit suffix "-04" indicates the 4 MHz speed grade; the -10 variant runs at 10 MHz for higher-throughput designs. Typical applications include consumer appliance controls, simple sensor interfaces, LED display drivers, low-end remote controls, and replacement of discrete logic in cost-driven embedded products. The through-hole PDIP-18 package suits prototyping, hobbyist projects, and legacy designs where socketed parts are preferred. Per the Microchip product page, a newer device, the PIC16F54, is recommended for new designs. When designing with the PIC16C54A-04/P, ensure the oscillator configuration (RC, XT, LP, or HS) matches the application: this part is specified for 4 MHz, requiring an XT-mode crystal. The OTP memory means firmware must be fully verified before programming; for iterative development, consider the PIC16F54 equivalent or the PIC16C54C revision. This page synthesizes distributor pricing, drop-in OTP alternatives in the same PDIP-18 footprint, and practical design notes not found in the manufacturer datasheet.

RFQ যোগাযোগ
PIC16C54A-04/SO - 8-Bit 4MHz OTP MCU, 18-SOIC | Microchip
PIC16C54A-04/SO

PIC16C54A-04/SO - 8-Bit 4MHz OTP MCU, 18-SOIC | Microchip

The Microchip Technology PIC16C54A-04/SO is an 8-bit RISC microcontroller from the PIC16C5x family, delivering 4 MHz CPU performance with 768 bytes of One-Time-Programmable (OTP) program memory and 25 bytes of data RAM, housed in an 18-pin SOIC package. The 'A' revision provides instruction-set improvements over the original PIC16C54 and is built on a fully static CMOS process, enabling operation down to DC and a wide 4.5V to 5.5V supply range. An OTP microcontroller is a member of the broader microcontroller family, which itself belongs to the embedded processing class of semiconductors. Within the PIC16C5x hierarchy, the PIC16C54A sits at the low-pin-count, low-memory tier (768B code, 25B RAM, 12 I/O pins) and is positioned below the PIC16C55/56/57/58 variants. The part is designed for cost-sensitive, high-volume embedded control where ROM/EPROM/Flash flexibility is unnecessary and one-time factory or in-circuit programming at production time is acceptable. Key features include a 12-bit instruction word with 33 single-word instructions, a two-level deep stack for subroutine nesting, seven or eight special-function hardware registers, an 8-bit real-time counter/timer (TMR0) with 8-bit prescaler, direct/indirect/relative addressing modes, and 12 bidirectional digital I/O pins grouped into two ports (PORTB, PORTA-style). Power-saving SLEEP mode and a Watchdog Timer (WDT) are provided for unattended and brown-out-tolerant applications, though the commercial-temperature PIC16C54A does not include the Low-Voltage Programming (LVP) feature found on later F-series parts. The PIC16C5x architecture uses a 12-bit-wide instruction set with an 8-bit-wide data path, yielding approximately 2:1 code compression versus other 8-bit microcontrollers in its class and giving the PIC16C54A a meaningful performance/cost advantage in timing-sensitive control loops. Two addressing modes for data plus a two-level hardware stack make assembly code portable across the 16C5x/16F5x family, simplifying migration to PIC16F54 when flash-based reprogramming is desired. Typical applications include simple appliance controllers, remote-control transmitters, LED driving and lighting controllers, battery chargers, sensor signal conditioning, smart toys and consumer gadgets, automotive body and interior modules, and any cost-driven 5V embedded node. The 18-pin SOIC footprint keeps the BOM small and the PCB layout straightforward for hand-solderable prototypes as well as high-volume reflow assembly. When designing with the PIC16C54A-04/SO, choose a 4 MHz crystal or external clock with two 22 pF loading capacitors and ensure the MCLR reset network (typically 10 kohm pull-up plus 100 nF cap) is present. Because the memory is OTP, firmware bugs cannot be field-updated, so a verified production flow (or migration to PIC16F54 for development convenience) is recommended. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the standalone manufacturer datasheet.

RFQ যোগাযোগ
PIC16C54A-04/SS - 8-Bit 4MHz OTP MCU, 768B | Microchip
PIC16C54A-04/SS

PIC16C54A-04/SS - 8-Bit 4MHz OTP MCU, 768B | Microchip

The Microchip Technology PIC16C54A-04/SS is an 8-bit EPROM/ROM-based CMOS microcontroller from the PIC16C5x family operating at up to 4MHz, with 768 bytes (512 x 12) of One-Time-Programmable (OTP) program memory and 25 bytes of RAM, housed in a 20-pin SSOP package. It delivers 12 I/O pins, a two-level deep hardware stack, and a single 8-bit Timer0 with a programmable prescaler, providing a compact, low-cost RISC control platform for simple embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, I/O peripherals, and timers on one die. The PIC16C54A belongs to the original PIC16C5x baseline family introduced by Microchip in the early 1990s; these were the industry's first 8-bit RISC microcontrollers with 12-bit-wide instructions and an 8-bit-wide data path, achieving 2:1 code compression over competing 8-bit architectures in the same price tier. This category sits within the broader hierarchy: 8-bit microcontroller -> RISC microcontroller -> embedded controller -> integrated circuit. Key features of the PIC16C54A-04/SS include 33 single-word, single-cycle instructions, direct/indirect/relative addressing modes, a power-on reset, a watchdog timer with on-chip RC oscillator, and a wide operating voltage range from 2.5V to 6.0V. The '04' speed grade specifies a 4MHz maximum clock, and the OTP EPROM program memory is ideal for low- to medium-volume production where mask-ROM tooling is uneconomical. CMOS technology delivers low power consumption (typically < 2 mA at 5V/4MHz), making this part suitable for battery-aware applications. Architecturally, the device uses a Harvard-style separate code and data bus, a 12-bit instruction word, and a small register file of seven or eight special-function hardware registers. This minimal footprint is intentional: the design optimises die area, cost, and predictability for high-volume appliance and consumer-electronics tasks rather than peripheral-rich applications. There is no ADC, no UART, no interrupts, and no on-chip oscillator, keeping the silicon die small and the unit price low. Typical applications include remote controls, small appliance controls, LED driving patterns, simple sensor interfaces, battery chargers, security keypads, and any cost-sensitive volume-production design that previously used discrete logic. The SSOP-20 footprint is well supported on standard pick-and-place lines and accepts hand-soldering for prototyping. When designing with this part, note that Microchip's product page explicitly states: a newer device is available, please consider PIC16F54. The PIC16F54 is the recommended flash-memory successor for new designs. The PIC16C54A-04/SS remains in production for existing designs and maintenance spares but should not be selected for new projects. This page synthesises distributor pricing, cross-reference alternatives, and design notes not found in the manufacturer datasheet alone. Engineers comparing OTP vs flash 8-bit MCUs will find the comparison table and alternatives array particularly useful.

RFQ যোগাযোগ
PIC16C54A-04E/P - 8-bit OTP MCU, 4MHz, 12 I/O, PDIP-18 | Microchip
PIC16C54A-04E/P

PIC16C54A-04E/P - 8-bit OTP MCU, 4MHz, 12 I/O, PDIP-18 | Microchip

The Microchip Technology PIC16C54A-04E/P is an 8-bit RISC EPROM/ROM-based CMOS microcontroller in a 18-pin PDIP through-hole package, belonging to the PIC16C5X family. It features a 12-bit instruction word, 33 single-word instructions (all single-cycle except program branches which are two-cycle), a 4 MHz maximum clock input (200 ns instruction cycle), 768 bytes of OTP program memory, 25 bytes of RAM, and 12 digital I/O lines. The device operates from a 4.5V to 5.5V supply and is rated for the extended commercial temperature range. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, program memory, and peripherals around an 8-bit data bus. The PIC16C5X family sits at the low end of the microcontroller hierarchy: 8-bit MCU -> RISC microcontroller -> embedded controller -> semiconductor. It targets cost-sensitive, deterministic control tasks where instruction simplicity and predictable timing outweigh raw throughput. The RISC architecture's 33-instruction set reduces development time and code size versus CISC alternatives. Key features of the PIC16C54A-04E/P include OTP (One-Time Programmable) EPROM program memory, a 4 MHz external clock input, 25 bytes of general-purpose RAM, 12 bidirectional I/O pins with individual direction control, a power-on reset circuit, a watchdog timer with on-chip RC oscillator, and a sleep (low-power) mode. The 12-bit-wide instructions deliver 2:1 code compression over typical 8-bit CISC competitors, and the Harvard architecture separates program and data buses for deterministic instruction fetch. Typical applications include appliance controls, simple sensor interfaces, LED driving circuits, hobbyist projects, and industrial logic replacement. Designers favor the PIC16C54A-04E/P for low-cost, low-volume production where the OTP memory suffices and the extended temperature range supports commercial and light-industrial environments. Note that the underlying PIC16C54A die has been superseded by the PIC16F54; new designs are not recommended per the Microchip product page. When designing with this part, consider migrating to the flash-based PIC16F54 for new designs to gain in-system reprogrammability, or to the PIC16C54C revision for minor errata fixes. Programming requires a UV-erasable window for the JW package or a one-time-programmable programmer for the PDIP form. This page synthesizes distributor pricing, verified specifications from the Microchip datasheet family, and practical drop-in alternatives not consolidated on any single distributor page.

RFQ যোগাযোগ
PIC16C54A-04E/SS - 4MHz 768B OTP 8-Bit MCU | Microchip SSOP-20
PIC16C54A-04E/SS

PIC16C54A-04E/SS - 4MHz 768B OTP 8-Bit MCU | Microchip SSOP-20

The Microchip Technology PIC16C54A-04E/SS is a member of the PIC16C5X family of 8-bit, fully-static, EPROM/ROM-based CMOS microcontrollers. It operates at up to 4 MHz, integrates 768 bytes (512 × 12) of One-Time Programmable (OTP) program memory and 25 bytes of general-purpose RAM, and is packaged in a 20-pin SSOP (5.3 mm body width). The part is specified for the commercial 0 °C to +70 °C operating range (the "E" temperature designator) and a 4.5 V to 5.5 V supply. An OTP-based 8-bit microcontroller (also called a One-Time-Programmable MCU) is a single-chip computer that integrates CPU, non-volatile program memory, RAM, and peripherals on one die. Program memory is written once with a device programmer and cannot be erased, making these parts common in low-cost, fixed-function products. The PIC16C5X family falls under the taxonomy: microcontroller -> 8-bit MCU -> RISC MCU -> PIC16C family -> CMOS OTP microcontroller, and the PIC16C54A represents the 512 × 12 (≈768 byte) code-density tier of that family. Key features of the PIC16C54A-04E/SS include: 12 I/O pins with individual direction registers; a 33-instruction RISC instruction set with 12-bit-wide opcodes yielding 2:1 code compression over typical 8-bit CISC MCUs; Power-On Reset (POR), Watchdog Timer (WDT) and a selectable oscillator type (RC, XT, LP, HS); and 8-bit timer/counter. The -04 speed grade indicates a 4 MHz maximum oscillator frequency, and the SS package denotes a 20-pin SSOP. The PIC16C5X architecture uses a Harvard structure with separate program and data paths, 2-stage pipeline execution, and a fully-static core that allows the clock to be stopped without losing register state. The 12-bit instruction word matches the 12-bit program-memory organization, and the device address space is paged into two halves for code fetches above 0x1FF. Because it is CMOS and uses EPROM rather than flash for program storage, quiescent current is low in standby (≈ 1 µA typical for the family, depending on oscillator mode) and the part is well-suited to mains- or battery-powered appliances. Typical applications for the PIC16C54A-04E/SS include simple remote controls, small appliance controllers (toasters, coffee makers, fans), toys and educational hardware, sensor interface modules, and any high-volume, fixed-function logic replacement where 12-bit-wide RISC code density and an OTP part minimize unit cost. Designers also pick this family when they need a tiny, low-pin-count MCU that runs deterministically from a basic RC or crystal oscillator. When designing with this device, plan toolchain support carefully. PIC16C54A OTP parts are programmed with a Microchip device programmer (e.g., MPLAB PM3) and developed with MPLAB IDE / XC8 legacy compiler support; some modern MPLAB X features target the flash-based PIC16F equivalents instead. Always derate oscillator frequency for the chosen oscillator mode (RC, XT, LP, HS) and validate WDT behavior with MPLAB SIM before committing code to OTP parts. This page synthesizes distributor availability, drop-in package-compatible alternatives from the PIC16C5X family, and practical design notes that go beyond the manufacturer datasheet's brief device summary.

RFQ যোগাযোগ
PIC16C54A-04I/SO - 8-bit 4MHz 768B OTP MCU SOIC-18 | Microchip
PIC16C54A-04I/SO

PIC16C54A-04I/SO - 8-bit 4MHz 768B OTP MCU SOIC-18 | Microchip

The Microchip Technology PIC16C54A-04I/SO is an 8-bit RISC microcontroller in the PIC16C5X family, featuring a 4 MHz CPU clock, 768 bytes of One-Time-Programmable (OTP) program memory organized as 512 × 12 words, and 25 bytes of on-chip data RAM, housed in an 18-pin SOIC package (7.50 mm / 0.295 inch body width). Background: An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory (ROM/Flash/OTP), data RAM, and peripheral I/O on one die. PIC microcontrollers use a RISC (Reduced Instruction Set Computer) architecture with a Harvard memory layout that separates program and data buses. The PIC16C5X series is one of Microchip's oldest and most cost-optimized families, designed for high-volume, cost-sensitive embedded control. OTP memory allows the user to program the device once with a low-cost EPROM writer, while the 12-bit wide instruction word gives 2:1 code compression compared with 8-bit CISC MCUs of the same era. Key features include 12-bit wide instructions, an 8-bit data path, seven special function hardware registers, a two-level deep hardware stack, and direct, indirect, and relative addressing modes for both data and instructions. The part also integrates an 8-bit real-time clock/counter (TMR0) and offers a 4 MHz maximum operating frequency, 12 digital I/O pins, and an instruction cycle time of four oscillator clocks. The device operates from a 4.5 V to 5.5 V single supply. Architecturally, the PIC16C54A implements a fully static CMOS core so the clock can be stopped without losing register state, and its symmetric instruction set is optimized for one-cycle execution except for branch instructions which take two cycles. The 12-bit instruction width delivers denser code than typical 8-bit MCUs of the same generation, allowing the small 512-word OTP program space to host meaningful applications. Typical applications include low-cost consumer appliances, hobbyist and educational projects, simple LED controllers, small white-goods control boards, and battery chargers where minimal logic and very low unit cost are required. The device is also used as a glue-logic replacement for discrete timer/sequencer circuits and as an introduction MCU for embedded training. When designing with the PIC16C54A-04I/SO, use the industrial temperature grade (I suffix) to ensure operation from -40 °C to +85 °C, and note that OTP memory cannot be reprogrammed in-circuit - a flash-based PIC16F54 should be considered for prototyping. Decoupling caps of 100 nF plus 10 µF close to VDD are required for stable operation. This page synthesizes Microchip distributor pricing, verified drop-in alternatives within the same PIC16C5X family, and practical design notes that are not consolidated in any single manufacturer document.

RFQ যোগাযোগ
PIC16C54A-04I/SS - 8-bit EPROM MCU, 4MHz, SSOP-20 | Microchip
PIC16C54A-04I/SS

PIC16C54A-04I/SS - 8-bit EPROM MCU, 4MHz, SSOP-20 | Microchip

The Microchip Technology PIC16C54A-04I/SS is an EPROM/ROM-based 8-bit CMOS microcontroller from the PIC16C5X family, delivering up to 4 MHz CPU clock speed in a 20-pin SSOP package. It integrates 768 bytes of one-time-programmable (OTP) program memory (512 x 12 words), 25 bytes of data RAM, and a 12-bit instruction word with 8-bit data path. The device operates from a 4.5V to 5.5V supply and is specified over the industrial -40C to +85C temperature range. An 8-bit PIC microcontroller (Programmable Intelligent Computer) is a Harvard-architecture RISC processor that executes single-cycle instructions from program memory while accessing a separate data memory space. Within the broader product taxonomy, the PIC16C5X belongs to the PIC16 family of mid-range microcontrollers, which itself sits within Microchip's 8-bit microcontroller portfolio under the Integrated Circuits > Microcontrollers category. EPROM-based PICs like the PIC16C54A were widely used in cost-sensitive, high-volume embedded applications where the program code is finalized at production time. Key features of the PIC16C54A-04I/SS include 12 I/O pins, an 8-bit real-time clock/counter (TMR0), a two-level hardware stack, and seven or eight special function hardware registers. Direct, indirect, and relative addressing modes are supported for both data and instructions. The 25-byte data RAM is shared with the seven special function registers, leaving a small working register file optimized for compact code. The 12-bit-wide instruction set achieves approximately 2:1 code compression versus competing 8-bit MCUs, an industry-recognized efficiency advantage of the PIC architecture. The PIC16C54A-04I/SS is built on a fully static CMOS process, allowing the CPU clock to be stopped without losing register state, which is valuable for ultra-low-power standby designs. The '04' speed suffix indicates a 4 MHz maximum oscillator frequency, while the 'A' suffix identifies the enhanced silicon revision over the original PIC16C54. The 'I' grade extends the operating temperature range to industrial -40C to +85C, and '/SS' denotes the SSOP-20 (Shrink Small Outline Package, 208 mil body width) surface-mount form factor. Typical applications include appliance controllers, simple sensor interfaces, battery chargers, LED drivers, automotive sub-systems (non-safety-critical), and other cost-sensitive embedded products that benefit from a tiny footprint and minimal external component count. With its small memory map and RISC core, the device targets applications where 768 bytes of OTP program storage is sufficient. When designing with this part, note that Microchip's product page recommends PIC16F54 as the recommended replacement for new designs. The PIC16F54 uses Flash program memory, allowing in-system reprogramming and erasing, which significantly improves development workflow and field-upgrade capability over the OTP PIC16C54A.

RFQ যোগাযোগ
PIC16C54A-10/P - 8-Bit OTP MCU, 10MHz, 512x12 | Microchip
PIC16C54A-10/P

PIC16C54A-10/P - 8-Bit OTP MCU, 10MHz, 512x12 | Microchip

The Microchip Technology PIC16C54A-10/P is a member of the PIC16C5X family of 8-bit CMOS microcontrollers operating at 10MHz, packaged in an 18-pin PDIP through-hole format. It integrates 768 bytes of OTP program memory (organized as 512 x 12-bit words), 25 bytes of general-purpose RAM, and 12 I/O pins, providing a compact and economical control solution for cost-sensitive embedded designs. The 12-bit wide instruction word delivers a 2:1 code compression advantage over competing 8-bit architectures, enabling efficient use of the OTP program space. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (program and data), and programmable I/O peripherals. The PIC16C5X family belongs to the RISC (Reduced Instruction Set Computer) microcontroller category within the broader class of 8-bit microcontrollers, which themselves are a subset of embedded processors under the semiconductor umbrella. PIC16C5X devices target simple control loops, glue logic replacement, and low-cost appliance designs where deterministic timing and minimal power consumption are valued over computational throughput. Key features include a two-level deep hardware stack for subroutine nesting, three addressing modes (direct, indirect, and relative) for both data and instructions, and an 8-bit real-time clock/counter (TMR0) with programmable prescaler. The OTP (One-Time Programmable) program memory allows factory or production-time programming but cannot be erased, making the part suited for high-volume production where code is fixed and stable. An internal RC oscillator option reduces external component count, while the commercial temperature grade (0C to +70C) suits indoor and benign-environment applications. The PIC16C54A employs a Harvard architecture with separate program and data buses, allowing instruction fetch and operand access to occur in the same cycle. This contributes to the family's deterministic instruction timing and predictable interrupt response, which are hallmarks of PIC MCU design. The architecture is intentionally simple to minimize die area, which historically positioned the PIC16C5X as one of the lowest-cost 8-bit MCUs in volume production. Typical applications include consumer appliance controllers, simple sensor interfaces, LED driving sequences, automotive interior lighting modules, battery chargers, and replacement of discrete logic. It also fits teaching kits and hobbyist embedded platforms where the simplicity of the PIC instruction set and the absence of bootloader complexity accelerate prototyping. Microchip recommends the PIC16F54 as the recommended new-design replacement since the PIC16C54A is flagged as Not Recommended for new designs. When designing with this part, verify that program memory requirements fit within the 512-word OTP space, because OTP cannot be reprogrammed in-circuit. Plan for an external programmer (e.g., PICkit) and ensure the MCLR/VPP pin is accessible for in-system programming during production. Avoid using this part in new designs where flash-based alternatives such as PIC16F54 offer equivalent functionality with in-circuit reprogrammability.

RFQ যোগাযোগ
PIC16C54A-10/SO - 8-Bit 10MHz OTP MCU 12 I/O | Microchip
PIC16C54A-10/SO

PIC16C54A-10/SO - 8-Bit 10MHz OTP MCU 12 I/O | Microchip

The Microchip Technology PIC16C54A-10/SO is an 8-bit CMOS microcontroller from the PIC16C5x family, operating at up to 10 MHz with 768 bytes (512 x 12) of One-Time-Programmable (OTP) program memory. The device is housed in an 18-pin SOIC package and provides 12 digital I/O lines plus 25 bytes of RAM, making it suited for cost-sensitive embedded control in industrial and consumer applications. A microcontroller is a single-chip computer that integrates a CPU core, program memory, working RAM, and configurable peripheral I/O into one package. Within the broader taxonomy, the PIC16C54A belongs to the 8-bit MCU class, which sits below 16-bit and 32-bit microcontrollers in performance but above simple logic ICs in functional density. The PIC architecture is a RISC-style design with 12-bit-wide instructions and an 8-bit data path, giving approximately 2:1 code density over many competitor 8-bit cores of the same era. Key differentiating features include 12-bit instruction word, 33 single-word instructions, two-level deep hardware stack, direct/indirect/relative addressing modes, an 8-bit real-time counter (TMR0), and a watchdog timer with on-chip RC oscillator. The 10 MHz rating delivers approximately 250 ns instruction cycle time, which is sufficient for simple state machines, keypad scanners, LED drivers, and appliance timers. Operating voltage spans 3.0 V to 5.5 V (commercial) with low-power CMOS construction. Architecturally, the device is OTP-based rather than flash-based, meaning the program memory is written once at production time and cannot be electrically erased. This makes the part cost-optimized for high-volume fixed-code products but unsuitable for field re-programming. Microchip documentation notes a recommended migration path to the flash-based PIC16F54 for new designs requiring reprogrammability, while the OTP PIC16C54A remains supported for existing production lines. Typical applications include appliance control boards, HVAC sub-system controllers, simple sensor interfaces, security keypads, low-end toy electronics, and replacement of discrete logic in cost-down redesigns. The wide SOIC footprint simplifies hand-soldering and rework for prototyping and low-volume builds. When designing in this part, remember the OTP limitation precludes field firmware updates - plan code revision strategy and validation up-front, or specify the PIC16F54 family for new designs. Decoupling should follow standard 0.1 µF ceramic on VDD, with optional bulk capacitance near the device. This page synthesizes distributor availability, drop-in alternatives from the same PIC16C5x family and PIC16F54 successor family, and practical design guidance not aggregated on any single manufacturer or distributor product page.

RFQ যোগাযোগ
PIC16C54A-10E/P - 8-bit 10MHz OTP MCU 768B 18-PDIP | Microchip
PIC16C54A-10E/P

PIC16C54A-10E/P - 8-bit 10MHz OTP MCU 768B 18-PDIP | Microchip

The Microchip Technology PIC16C54A-10E/P is an 8-bit RISC microcontroller from the PIC16C5X family, running at 10 MHz and packaged in a 18-pin PDIP through-hole format. It integrates 512 x 12 bits (768 bytes) of One-Time-Programmable (OTP) program memory, 25 bytes of RAM, and 12 digital I/O lines organized across multiple ports. The 10 MHz oscillator drives a 200 ns instruction cycle on all single-cycle instructions, with program branches taking two cycles, giving roughly 5 MIPS of throughput. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, working RAM, and I/O peripherals on one die. The PIC16C54A-10E/P belongs to the OTP/ROM-based PIC16C5X sub-family, the entry-level tier of the PIC16C family within the broader Microchip 8-bit PIC taxonomy (8-bit PIC -> PIC16C family -> PIC16C5X -> PIC16C54A). It is positioned for cost-sensitive, high-volume embedded control where firmware is finalized at production and no in-field re-programming is required. Key features include 33 single-word instructions, 8-bit data width with 12-bit instruction width delivering 2:1 code compression versus typical 8-bit CISC competitors, two hardware timers (TMR0 with 8-bit prescaler, watchdog/WDT), a 4.5V to 5.5V single-supply operating range, and integrated Power-On Reset (POR). The OTP memory is a windowless EPROM die that is electrically programmed once during production test, with no UV erase window in this plastic PDIP package. The architecture is a Harvard RISC core with a separate 12-bit program bus and 8-bit data bus, eliminating fetch-execute contention and giving deterministic single-cycle instruction execution. The device exposes 12 GPIO pins distributed as RA0-RA3 and RB0-RB7 with software-controlled weak pull-ups on PORTB. The ROM and RAM are mapped into separate address spaces, and the stack is hardware-fixed at two levels, suitable for shallow subroutines only. Typical applications include simple appliance controllers, LED chasers and decorative lighting, remote-control transmitters, basic sensor signal conditioning, toys and consumer gadgets, and industrial timer or counter modules. The wide 4.5V to 5.5V supply and 10 MHz clock cover most mains-derived 5V designs without external regulation or clock scaling. When designing with this part, choose it when firmware is finalized and unit cost dominates; if in-field re-programming is needed, migrate to PIC16F54 which is pin-compatible with Flash memory. The OTP nature means firmware bugs discovered post-production cannot be patched, so rigorous pre-production verification is essential. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the Microchip product page alone.

RFQ যোগাযোগ
PIC16C54A-10E/SO - 8-Bit OTP MCU, 10MHz, 12 I/O, 18-SOIC | Microchip
PIC16C54A-10E/SO

PIC16C54A-10E/SO - 8-Bit OTP MCU, 10MHz, 12 I/O, 18-SOIC | Microchip

The Microchip PIC16C54A-10E/SO is an 8-bit RISC OTP microcontroller in the PIC16C5X family, offering 10 MHz maximum clock speed and 12 digital I/O pins in a commercial-grade 18-pin SOIC (Small Outline, gull-wing) package. According to the verified distributor data, this device integrates 768 bytes (512 x 12) of One-Time-Programmable (OTP) program memory and operates from a 4.5V to 5.5V single supply. Its 33 single-word instruction set enables compact code generation with 2:1 compression over competing 8-bit MCUs in the same price tier. What is an OTP microcontroller? An OTP (One-Time-Programmable) microcontroller is a variant of flash/EPROM-based MCU whose program memory can be written exactly once during production programming, then becomes read-only. Compared with flash-based MCUs, OTP parts typically offer lower per-unit cost, faster programming during manufacturing, and a smaller die. In the broader taxonomy, the PIC16C54A belongs to: microcontroller (MCU) -> 8-bit MCU -> RISC MCU -> OTP MCU -> embedded controller. The PIC16C5X family is the historical baseline of Microchip's PIC architecture and is widely deployed in cost-sensitive, high-volume, simple-control appliances where reprogrammability is unnecessary. Key features include 33 single-word instructions, single-cycle execution at 200 ns (with two-cycle program branches), 12-bit-wide instruction word, 12 I/O ports, and a 10 MHz external clock. The PIC16C54A-10E/SO suffix decode indicates -10 = 10 MHz, E = Extended (commercial) temperature grade, and SO = 18-pin SOIC package. ROM type is OTP, packaged in a small-outline gull-wing surface-mount form factor suitable for automated PCB assembly. Architecturally, the PIC16C54A implements a Harvard-style RISC core with separated program and data paths, an 8-level hardware stack, and a 7-bit Special Function Register (SFR) map. Compared to contemporary CISC 8-bit MCUs, the PIC16C5X delivers higher MIPS-per-MHz and deterministic interrupt latency, which simplifies real-time control loops. The OTP program memory and limited SRAM (25 bytes typical for the family) constrain this part to simple state-machine and I/O-control tasks. Typical applications include appliance control (rice cookers, washing machines, microwave ovens), LED display drivers, simple motor control, battery chargers, remote-control transmitters, and consumer-electronics glue logic. The wide availability of compiler support, Microchip's MPLAB toolchain, and decades of legacy code make it a popular choice for designs that prioritize BOM cost over computational capability. When designing with this device, ensure the watchdog timer (WDT) is either enabled for safety-critical applications or explicitly disabled for deterministic timing. For brown-out-sensitive applications, verify that the supply decoupling network maintains VDD above the BOR threshold under all transient load conditions, and that the MCLR reset circuit is properly decoupled to prevent spurious resets. This page synthesizes distributor pricing, drop-in alternative MPNs from the same PIC16C5X family, and practical design notes not consolidated in the manufacturer datasheet - giving engineers a single source for sourcing and second-sourcing decisions on this legacy 8-bit MCU.

RFQ যোগাযোগ
PIC16C54A-10I/P - 8-Bit 10MHz OTP MCU 12 I/O 18-PDIP | Microchip
PIC16C54A-10I/P

PIC16C54A-10I/P - 8-Bit 10MHz OTP MCU 12 I/O 18-PDIP | Microchip

The Microchip PIC16C54A-10I/P is an 8-bit CMOS microcontroller from the PIC16C5X family, delivering 10 MHz instruction execution in an 18-pin PDIP (Plastic DIP) through-hole package with industrial temperature rating. It integrates 768 bytes (512 x 12) of one-time-programmable (OTP) program memory, 25 bytes of RAM, and 12 digital I/O pins organized across two ports, making it suitable for compact embedded control applications. An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, data memory, and peripheral I/O on a single silicon die. The PIC16C5X family uses a RISC-style Harvard architecture with 12-bit-wide instructions and an 8-bit data path, enabling predictable single-cycle instruction execution for most opcodes and minimal deterministic interrupt latency. Positioned within Microchip's hierarchy, the PIC16C54A belongs to the 8-bit PIC microcontroller -> microcontroller -> embedded controller -> semiconductor category, serving entry-level control tasks distinct from higher-tier 16-bit and 32-bit PIC families. Key features include a 4.5 V to 5.5 V single-supply operating range, two-level deep hardware stack, direct/indirect/relative addressing modes, and an 8-bit real-time clock/counter (TMR0). The OTP program memory allows factory or user programming with a standard PIC programmer, while the 12-bit instruction width yields ~2:1 code compression over typical 8-bit CISC MCUs of the same class. Industrial temperature range (-40C to +85C) supports deployments beyond commercial office environments. Architecturally, the PIC16C54A employs a simplified 14-bit instruction subset compared with later PIC16F/16C6X/16C7X families, with seven or eight special function hardware registers visible to user code. The 33-instruction set delivers deterministic single-cycle execution for most opcodes except branches, which take two cycles. A hardware multiply and divide are not available in this baseline; arithmetic-intensive tasks should be evaluated against newer PIC16F54 or PIC16F57 flash replacements that offer higher speed and in-system reprogrammability. Typical applications include low-cost appliance timer controls, simple sensor interface boards, hobbyist and maker projects, replacement of discrete logic in glue logic consolidation, and industrial indicator panels. The through-hole PDIP-18 footprint is preferred for breadboarding, educational kits, and legacy designs where through-hole assembly remains desirable. When designing with the PIC16C54A, ensure a regulated 5 V supply within the 4.5 V to 5.5 V window and verify that oscillator selection matches the 10 MHz specification. OTP memory cannot be erased, so production code must be fully validated on UV-erasable (PIC16C54A JW windowed) prototypes before committing to OTP parts. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, application design notes, and industrial-grade considerations not found in the standalone datasheet - reducing design-cycle time for engineers migrating from OTP PIC16C5X designs to flash-based replacements.

RFQ যোগাযোগ
PIC16C54A-10I/SO - 8-bit OTP MCU, 768B EPROM, 10MHz, SOIC-18
PIC16C54A-10I/SO

PIC16C54A-10I/SO - 8-bit OTP MCU, 768B EPROM, 10MHz, SOIC-18

The Microchip Technology PIC16C54A-10I/SO is an 8-bit EPROM/OTP-based CMOS microcontroller from the legacy PIC16C5X family, delivering 10 MHz CPU clock performance in an 18-pin SOIC (SO) wide-body package. It integrates 768 bytes (512 x 12) of OTP program memory, 25 bytes of RAM, and 12 digital I/O pins operating from a 4.5 V to 5.5 V supply. Background knowledge: A microcontroller (MCU) is a single-chip computer that contains a CPU, non-volatile program memory, volatile data memory, and programmable peripherals. The PIC16C5X family represents one of the original low-cost, high-performance, fully-static, EPROM/ROM-based 8-bit CMOS MCU families from Microchip, optimized for cost-sensitive embedded control. They sit hierarchically under microcontroller -> embedded processor -> semiconductor IC. The PIC16C5X architecture uses 12-bit wide instructions and an 8-bit wide data path with RISC characteristics, achieving roughly 2:1 code compression versus typical 8-bit CISC competitors, which directly reduces program-memory footprint and unit cost. Key differentiating features include 12-bit wide instructions, two-level deep hardware stack, direct/indirect/relative addressing modes, an 8-bit real-time clock/counter (TMR0), seven or eight special-function hardware registers, and a watchdog timer for reliable unattended operation. The "-10" speed grade corresponds to a 10 MHz oscillator input / 100 ns instruction cycle. The "I" suffix denotes the industrial operating temperature range of -40C to +85C. Technically, the PIC16C5X uses a Harvard bus architecture with separate program and data buses. Its fully-static CMOS design eliminates minimum clock-rate requirements, allowing the MCU to be stopped (clock halted) without losing register state, which is valuable for ultra-low-power standby designs. The 12-bit instruction word packs opcode and operand in a single fetch, simplifying the fetch unit. Typical applications include simple appliance control, sensor signal conditioning, LED driver sequencing, remote transmitter controllers, and low-end consumer products where cost dominates feature requirements. The wide-body SOIC-18 package suits through-hole-style hand assembly as well as automated SMT lines that can handle 300-mil pitch SOIC devices. Design consideration: Because OTP memory can be programmed only once, prototype in the equivalent JW (windowed) or F (Flash) variant (e.g., PIC16F54) and migrate the locked firmware to PIC16C54A for volume production. Always include a decoupling capacitor (100 nF X7R) within 5 mm of VDD, and route MCLR with a short trace and proper pull-up. This page synthesizes distributor pricing, drop-in same-package alternatives, and application guidance not consolidated in the manufacturer datasheet, providing a single source for component selection, sourcing, and design-in decisions.

RFQ যোগাযোগ
PIC16C54A-20/SO - 8-Bit 20MHz OTP MCU 768B | Microchip
PIC16C54A-20/SO

PIC16C54A-20/SO - 8-Bit 20MHz OTP MCU 768B | Microchip

The Microchip Technology PIC16C54A-20/SO is an 8-bit RISC CMOS microcontroller from the PIC16C5X family, delivering 20MHz clock speed with 768 bytes (512 x 12) of One-Time-Programmable (OTP) program memory in an 18-pin SOIC package. It features 12 I/O pins, 25 bytes of RAM, and a 12-bit instruction word with symmetric instruction set for 2:1 code compression over competing 8-bit architectures in its class. The device operates from a 4.5V to 5.5V single supply across the commercial temperature range, drawing microamp-level quiescent current typical of PIC16C5X EPROM/ROM-based CMOS designs. What is an 8-bit OTP microcontroller? An 8-bit OTP microcontroller is a small, fixed-instruction computer on a single IC that uses one-time-programmable EPROM for program storage - meaning the firmware can be written once and is non-volatile but not erasable. The PIC16C54A belongs to the microcontroller (MCU) hypernym hierarchy: microcontroller → 8-bit MCU → RISC MCU → CMOS MCU → EPROM/ROM-based MCU → OTP MCU. This family targets cost-sensitive embedded control where flash reprogrammability is unnecessary and a small, deterministic instruction set is preferred. Key features of the PIC16C54A include a two-level hardware stack for subroutine nesting, direct/indirect/relative addressing modes, an 8-bit real-time clock/counter (TMR0) with programmable prescaler, and seven or eight special-function hardware registers for peripheral control. The architecture uses Harvard-style separate program/data buses, single-cycle instruction execution (except branches), and 12-bit-wide instruction words optimized for compact code density. Watchdog timer with on-chip RC oscillator and power-on reset are standard features that simplify external circuitry. The PIC16C54A-20/SO uses a CMOS process with fully static operation, allowing the clock to be stopped without losing register state. Its low-power CMOS design and EPROM-based program memory make it well suited for high-volume, cost-sensitive consumer and industrial control applications where code is finalized at production. The 'A' revision improved oscillator stability and reduced current consumption versus the original PIC16C54. Typical applications include appliance controls, security system sensor interfaces, simple timer/counter subsystems, LED drivers, automotive body electronics, and remote-control transmitters. The wide software base and stable instruction set also make it popular for educational and hobbyist embedded projects where a simple, deterministic core is preferred over modern flash-based MCUs. When designing with this part, note that OTP memory cannot be re-programmed in-circuit. For prototyping or field-updatable designs, Microchip recommends the pin-compatible flash-based PIC16F54. The 18-SOIC package has a 7.50mm body width and supports standard surface-mount assembly. This page synthesizes distributor pricing, parametric cross-references, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate the PIC16C54A-20/SO for both new designs and legacy maintenance scenarios.

RFQ যোগাযোগ
PIC16C54A-20E/P - 8-Bit 20MHz OTP MCU, 18-PDIP | Microchip
PIC16C54A-20E/P

PIC16C54A-20E/P - 8-Bit 20MHz OTP MCU, 18-PDIP | Microchip

The Microchip Technology PIC16C54A-20E/P is an 8-bit RISC OTP (One-Time-Programmable) CMOS microcontroller running at 20 MHz, with 768 bytes (512 × 12) of program memory, 25 bytes of RAM, and 12 I/O pins, housed in a 18-pin PDIP through-hole package. It executes 33 single-word instructions with a 200 ns instruction cycle and belongs to the legacy PIC16C5x baseline architecture that established the PIC RISC lineage. The -20 speed grade supports a 20 MHz external clock, and the 'E' suffix designates the Extended operating temperature grade of -40 °C to +125 °C, suitable for industrial and automotive-grade environments. A microcontroller (MCU) is a single-chip computer containing a CPU, program memory (ROM/OTP/Flash), data memory (RAM), and peripheral I/O. The PIC16C5x baseline family uses a 12-bit-wide instruction word and a RISC architecture with a single accumulator (W register), giving 2:1 code compression over typical 8-bit CISC MCUs in its class. This makes PIC16C54A-20E/P well suited to high-volume, cost-sensitive embedded control where deterministic instruction timing and minimal instruction set learning curve outweigh the need for peripherals such as ADC, UART, or PWM. Key features of the PIC16C54A-20E/P include 8-bit data width, a 12-bit instruction word, 768 bytes of OTP program memory, 25 bytes of general-purpose RAM, 12 digital I/O pins arranged as PORTA (4-bit) and PORTB (8-bit), an 8-bit real-time clock/counter (RTCC) with 8-bit prescaler, and a watchdog timer (WDT) for reliable unattended operation. Power consumption is below 2 mA at 5 V/20 MHz typical, with a power-down (SLEEP) mode reducing current to microampere levels. The device supports external RC, XT, HS, and LP oscillator modes selectable by configuration fuse. Architecturally, PIC16C54A-20E/P uses a Harvard-style memory layout with separate program and data buses and a 2-stage pipeline. The fixed 200 ns instruction cycle (4 × Tosc) means every instruction except program branches completes in one cycle, and branches in two cycles. The 12-bit-wide OTP program memory (512 words × 12 bits) is sufficient for compact control loops, while the 25-byte RAM supports small data structures. The 8-level hardware stack limits subroutine nesting depth to eight, a defining constraint of the baseline PIC family. Typical applications for PIC16C54A-20E/P include automotive body controllers, industrial sensor interfaces, low-cost consumer appliances, simple LED and relay drivers, and replacement of discrete logic in legacy designs. The wide -40 °C to +125 °C temperature range and the robust baseline PIC instruction set make it a long-life MCU for harsh environments. When designing with this device, observe the 18-pin PDIP package pinout, allocate one port pin for the MCLR reset if internal reset is disabled, and ensure the chosen oscillator mode matches the external crystal or resonator frequency. OTP memory means firmware is final after programming, so verify code with the simulator (MPLAB SIM) and in-circuit emulation tools before committing to production. This page synthesizes distributor pricing, drop-in alternative MPNs, application guidance, and practical design notes beyond what the bare manufacturer datasheet provides, helping engineers source and integrate PIC16C54A-20E/P into new designs and maintenance of legacy systems.

RFQ যোগাযোগ
PIC16C54A-20E/SS - 8-Bit 20MHz OTP MCU 768B | Microchip
PIC16C54A-20E/SS

PIC16C54A-20E/SS - 8-Bit 20MHz OTP MCU 768B | Microchip

The Microchip Technology PIC16C54A-20E/SS is an 8-bit RISC microcontroller in the PIC16C5X family, featuring a 20 MHz maximum clock input, 768 bytes of One-Time-Programmable (OTP) program memory (512 x 12 words), 25 bytes of RAM, and 12 general-purpose digital I/O pins in a 20-pin SSOP (Shrink Small Outline) package. The device executes instructions from a 33-instruction set, with most instructions completing in a single 200 ns instruction cycle; only program branches require two cycles (400 ns). The operating voltage range is 4.5 V to 5.5 V, the part is specified for the extended industrial temperature grade (-40 °C to +125 °C), and an on-chip RC oscillator plus support for external crystal/ceramic resonator or external clock inputs give designers flexibility on the clocking topology. A microcontroller (MCU) is a single-chip computer that integrates a CPU, program memory, working RAM, and peripheral I/O on one die. 8-bit MCUs like the PIC16C5X sit at the entry level of the microcontroller taxonomy: 8-bit -> RISC microcontroller -> embedded controller -> semiconductor. They typically serve cost- and power-sensitive deterministic control tasks rather than compute-heavy or user-interface applications, and the PIC16C5X family in particular targets low-cost, high-volume appliance, automotive, and industrial control designs with a RISC architecture and Harvard bus structure. Key differentiating features of the PIC16C54A-20E/SS include its OTP program memory (factory- or field-programmable but not electrically re-programmable in-circuit like flash), 12-bit wide instructions that yield roughly 2:1 code compression over competing 8-bit CISC cores, and a watchdog timer with its own on-chip RC oscillator for unattended operation. The wide operating temperature range suits automotive under-hood and industrial cabinet environments. Architecturally, the PIC16C54A uses a two-stage pipelined Harvard architecture: the program and data buses are physically separate, so an instruction fetch does not collide with a data read. The 12-bit instruction word keeps opcode decoding logic small, which is why the silicon area (and cost) stays low even at 20 MHz throughput. Typical applications include automotive body and chassis subsystems (window lifters, seat controllers, simple sensor interfaces), white goods and small appliance control (coffee makers, microwave ovens, washing machine user-interface panels), industrial control (sensor signal conditioning, relay drivers, simple PID loops implemented in firmware), and consumer electronics (remote controls, toys, low-cost key fobs). When designing with this device, plan firmware layout around the OTP constraint: any firmware revision that needs to change program memory requires a new part. Designers targeting in-circuit reprogrammability should evaluate the pin-compatible PIC16F54 instead, which uses Flash program memory. This page synthesizes distributor pricing, cross-reference alternatives, and practical design notes not found in the manufacturer datasheet alone, and is optimized for engineers and procurement teams evaluating PIC16C54A-20E/SS for new designs and legacy replacements.

RFQ যোগাযোগ
PIC16C54A-20I/P - 8-Bit 20MHz OTP MCU, 512x12 ROM | Microchip
PIC16C54A-20I/P

PIC16C54A-20I/P - 8-Bit 20MHz OTP MCU, 512x12 ROM | Microchip

The Microchip Technology PIC16C54A-20I/P is a 20 MHz, 8-bit, fully-static, EPROM/ROM-based CMOS microcontroller in the PIC16C5X family, housed in an 18-pin PDIP (P) through-hole package. It integrates 512 × 12-bit words of one-time-programmable (OTP) program ROM, 25 bytes of data RAM, and 12 digital I/O pins, providing a compact compute engine for cost-sensitive embedded control. The device operates from a 4.5 V to 5.5 V single supply, supports clock speeds up to 20 MHz, and is specified over the industrial temperature range (-40 °C to +85 °C). An 8-bit microcontroller (MCU) is a small computer-on-a-chip that integrates a CPU core, program memory, working RAM, I/O peripherals, and a clock generator into a single package. The PIC16C5X family belongs to the broader category of microcontrollers within the integrated-circuits taxonomy: microcontroller -> embedded controller -> semiconductor device. The 'C' in PIC16C5X denotes OTP EPROM program memory (one-time programmable, windowed for prototype erase). The 12-bit-wide instruction word gives 2:1 code compression over typical 8-bit CISC microcontrollers in the same price class, and the 8-bit data path keeps the core simple and deterministic for real-time control. Key features include a RISC architecture with 33 single-word/cycle instructions, a two-level deep hardware stack, direct/indirect/relative addressing modes, an 8-bit real-time clock/counter (TMR0) with 8-bit prescaler, a watchdog timer with on-chip RC oscillator, and power-saving SLEEP mode. The industrial-grade -I/-P variant is rated for -40 °C to +85 °C operation and is delivered in a plastic DIP-18 through-hole package suited for breadboarding, legacy equipment, and industrial controls. A Microchip newer-device notice recommends PIC16F54 as a modern Flash replacement for new designs. Typical applications include appliance controllers, simple sensor interfaces, LED drivers, battery chargers, automotive sub-systems, and industrial timer/counter logic where the small footprint, deterministic execution, and proven 5 V PIC ecosystem outweigh the need for larger memory or analog peripherals. When designing with PIC16C54A-20I/P, note that OTP program memory cannot be re-programmed in-circuit; for production firmware revision flexibility consider the PIC16F54 (Flash) drop-in alternative in the same PDIP-18 footprint. Use a 4.7 kΩ pull-up on MCLR/VPP and provide a stable 20 MHz clock to OSC1 with appropriate capacitor selection per the crystal/ resonator manufacturer's load capacitance guidance. The PIC16C54A-20I/P remains in active production for industrial and legacy designs, but Microchip's product page explicitly recommends PIC16F54 for new designs. This page synthesizes distributor pricing, drop-in PIC16C54/55/57 family alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ যোগাযোগ
PIC16C54A-20I/SO - 8-Bit 20MHz OTP MCU 768B | Microchip
PIC16C54A-20I/SO

PIC16C54A-20I/SO - 8-Bit 20MHz OTP MCU 768B | Microchip

The Microchip Technology PIC16C54A-20I/SO is a member of the PIC16C5X family of low-cost, high-performance 8-bit fully static EPROM/ROM-based CMOS microcontrollers. It runs at 20 MHz clock speed, provides 768 bytes (512 × 12) of OTP program memory, 25 bytes of RAM, and operates from a 4.0V to 6.0V industrial-temperature supply. The device is housed in an 18-pin SOIC (SO) package. An 8-bit microcontroller is a small computing system-on-chip integrating an 8-bit CPU core, program memory, data RAM, and peripheral interfaces. The PIC16C5X family uses a RISC architecture with 33 single-word/single-cycle instructions, achieving 2:1 code compression versus competing 8-bit MCUs in its class. It executes most instructions in 200 ns at 20 MHz, providing deterministic timing suitable for cost-sensitive embedded control. The PIC16C54A specifically targets applications requiring absolute minimalism — no interrupts, two-level hardware stack, and seven/eight SFRs — making it a baseline controller for hard real-time logic. Key features include a 12-bit wide instruction word with 8-bit data path, an 8-bit real-time clock/counter (TMR0), direct/indirect/relative addressing modes, 12 I/O pins, and an integrated power-on reset / brown-out detector on later revisions. The wide operating voltage (4.0V–6.0V) and industrial temperature range (-40°C to +85°C, denoted by the 'I' suffix) suit industrial, automotive aftermarket, and consumer appliances. Typical applications include timer replacements, smart-card readers, simple motor drives, security keypads, and battery chargers. The EPROM-based OTP memory makes it ideal for low-volume production where Flash reprogrammability is unnecessary but fast time-to-market matters. When designing with this part, note that the PIC16C54A is now flagged as Not Recommended for New Designs by Microchip — consider the Flash-based PIC16F54 as a modern drop-in equivalent for new projects, while continuing to source the OTP version for legacy repairs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond what the manufacturer datasheet alone provides, including lifecycle guidance for NRND parts.

RFQ যোগাযোগ
PIC16C54A-20I/SS - 8-bit OTP MCU 20MHz 12 I/O SSOP-20 | Microchip
PIC16C54A-20I/SS

PIC16C54A-20I/SS - 8-bit OTP MCU 20MHz 12 I/O SSOP-20 | Microchip

The Microchip Technology PIC16C54A-20I/SS is an EPROM/ROM-based 8-bit CMOS microcontroller from the PIC16C5X family, delivering 20 MHz operation, 768 bytes of OTP program memory and 25 bytes of RAM in a 20-pin SSOP (0.209 inch / 5.30 mm) industrial-temperature package. The 'I' suffix denotes an industrial operating range of -40C to +85C, while '20' specifies the 20 MHz maximum clock speed; 'SS' identifies the SSOP-20 footprint and '/SS' is the Microchip tape-and-reel packaging designator. A microcontroller (MCU) is a single-chip computer that integrates a CPU, non-volatile program memory, working RAM, and peripheral I/O. The PIC16C5X family sits at the foundational tier of Microchip's 8-bit MCU portfolio, using a RISC Harvard architecture with 12-bit-wide instructions and 8-bit-wide data path, two-level hardware stack, and direct/indirect/relative addressing modes. These parts ship in One-Time-Programmable (OTP) EPROM variants and target cost-sensitive, high-volume embedded control where program code is finalized at production. Key features of the PIC16C54A-20I/SS include 12 I/O pins, an 8-bit real-time clock/counter (TMR0) with 8-bit prescaler, a Watchdog Timer (WDT) with on-chip RC oscillator for reliable resets, and power-saving SLEEP mode. Power-on reset, power-up timer and oscillator start-up timer eliminate external reset circuitry. The SSOP-20 (5.30 mm body width) is significantly narrower than the PDIP-20 footprint, enabling compact board designs while still offering 20 functional pins. The PIC16C54A-20I/SS uses CMOS process technology with static (fully static) operation, allowing the clock to be stopped without losing register state - an unusual and useful feature for low-power applications. The 12-bit instruction word provides 2:1 code compression versus typical 8-bit MCUs of its era, allowing tighter code density in 768 bytes of OTP. The PIC16C5X core executes one instruction per instruction cycle (four oscillator clocks), giving 5 MIPS at 20 MHz - more than adequate for control loops, simple protocols and state-machine glue logic. Typical applications include appliance control (washing machines, microwave ovens, coffee makers), HVAC thermostat controls, security and fire-alarm panels, remote-control transmitters and receivers, and automotive body modules (RKE, lighting). The wide industrial temperature range plus the 4.5V-5.5V supply voltage make it suitable for 5V-only industrial subsystems and battery-backed sensor nodes. Per Microchip, PIC16F54 is the recommended newer migration target with flash memory, identical pinout and same peripherals. When designing with the PIC16C54A-20I/SS, ensure the OTP memory programming flow matches the chosen programmer (e.g., MPLAB PM3 or PICSTART Plus), because OTP parts can only be programmed once. Use the in-circuit debug header only on the JW (windowed) variants, not on the OTP/SS industrial part. Decouple VDD with a 0.1 uF ceramic plus 10 uF electrolytic placed within 5 mm of the supply pins. This page consolidates current distributor pricing, drop-in alternative pinouts, and pragmatic design notes that complement the manufacturer datasheet and reference manuals.

RFQ যোগাযোগ
PIC16C54A/JW - 8-bit OTP MCU, 20MHz, CERDIP | Microchip
PIC16C54A/JW

PIC16C54A/JW - 8-bit OTP MCU, 20MHz, CERDIP | Microchip

The Microchip Technology PIC16C54A/JW is an 8-bit RISC microcontroller from the PIC16C5x family, featuring a 20 MHz core processor, 768 bytes (512 x 12) of One-Time-Programmable (OTP) EPROM program memory, and 25 bytes of data RAM, housed in an 18-pin CERDIP (windowed, JW) through-hole package. It operates from 4.5V to 5.5V with 12 I/O pins and integrates Power-On Reset (POR), a Watchdog Timer (WDT), and an 8-bit timer/counter (TMR0). Per Microchip's product page, the PIC16C54A is flagged as 'Not Recommended for new designs,' with the PIC16F54 suggested as a newer alternative. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (program + data), and programmable I/O peripherals. The PIC16C5x family uses a 12-bit-wide instruction word with an 8-bit data path and a two-level hardware stack, which provides deterministic execution and very compact code (approximately 2:1 code compression vs other 8-bit MCUs of its era). OTP EPROM program memory allows the device to be programmed once after manufacture and retained indefinitely, while the 'JW' suffix denotes a CERDIP windowed package that exposes the die to UV light for erasing the EPROM during development. Key features include 12 CMOS bidirectional I/O pins arranged in two ports (RA, RB), direct/indirect/relative addressing modes for data and instructions, a wide commercial operating temperature range, and low CMOS power consumption. The 20 MHz clock rate delivers approximately 5 MIPS of throughput, and the simple RISC architecture of just 33 single-cycle instructions allows rapid firmware development. The device has been widely used in legacy embedded systems and is supported by Microchip's MPLAB IDE toolchain. Typical applications include appliance control modules, simple sensor interfaces, hobbyist and educational projects, and legacy industrial controllers. The windowed CERDIP package is particularly useful during prototyping because the EPROM can be erased with UV exposure, enabling code iteration without discarding the device. Designers frequently use PIC16C54A/JW as a development platform and then migrate to lower-cost OTP or QFN packages for volume. When designing with this part, note that the JW package is intended primarily for development. The plastic CERDIP, PDIP, SOIC, or SSOP variants are recommended for production. Engineers should confirm whether their application requires the windowed erase capability or whether a one-time-programmable variant suffices. This page synthesizes distributor pricing, drop-in Microchip alternatives, and practical design notes not found in the manufacturer datasheet alone. The data presented has been cross-referenced with DigiKey, Mouser, Octopart, and Microchip's own product page.

RFQ যোগাযোগ
PIC16C54AT-04E/SO - 8-Bit 4MHz OTP MCU 768B | 18-SOIC
PIC16C54AT-04E/SO

PIC16C54AT-04E/SO - 8-Bit 4MHz OTP MCU 768B | 18-SOIC

The Microchip Technology PIC16C54AT-04E/SO is an 8-bit, 4 MHz EPROM/ROM-based CMOS microcontroller in the PIC16C5X family, packaged in an 18-pin SOIC (SO) wide-body outline. It integrates 768 bytes of OTP program memory (organized as 512 x 12-bit words), 25 bytes of general-purpose RAM, and 12 I/O pins across the PIC16C54A silicon revision. An 8-bit microcontroller (MCU) is a single-chip computer whose data path, registers, and ALU operate on 8 bits at a time. The PIC16C5X family sits at the entry-level tier of Microchip's 8-bit portfolio, below the mid-range PIC16 and enhanced mid-range families. These baseline parts use a 12-bit-wide instruction word and a RISC-like Harvard architecture, where program and data memories have separate buses. The 8-bit MCU category belongs to the broader microcontroller hierarchy, which itself falls under embedded processors, integrated circuits, and finally semiconductors. OTP (One-Time Programmable) memory is a non-volatile technology that can be written once by the user, distinguishing the C5X family from flash-based PIC16F parts and from windowed EPROM C5X parts that allow erasure via UV light. Key features include a single-cycle 1 microsecond instruction cycle at 4 MHz, a 33-word instruction set where all instructions execute in one cycle except program branches (two cycles), and a 12 I/O pin count with independent direction control. The device also provides a watchdog timer for runaway code recovery, a power-on reset circuit, and an operating voltage range of 4.5 V to 5.5 V. The 'A' silicon revision improves upon the original PIC16C54 by adding oscillator selection bits and refined brown-out behavior. Architecturally, the PIC16C5X uses a two-stage pipeline overlapped with instruction fetch, so most instructions appear to execute in a single cycle. The 12-bit instruction width yields 2:1 code density compared to typical 8-bit MCUs of its era, and the symmetrical instruction set reduces development time. The OTP program memory is written using Microchip's serial programming protocol via the RB6/RB7 pins. Typical applications include low-cost embedded control nodes, appliance control boards, automotive body electronics subsystems, simple sensor interface modules, and hobby/educational microcontroller projects where legacy code bases already target the PIC16C5X instruction set. Designers transitioning new designs to the PIC16F54 are advised to verify peripheral compatibility, as the F54 family uses flash memory and a slightly different configuration word layout. When designing with this part, remember that OTP parts cannot be reprogrammed; budget for a small engineering rework loop or use the PIC16C54A-04E/SO equivalent windowed version for prototype bring-up. The 18-SOIC package has a thermal resistance in the typical 80-100 C/W range for small-outline SO packages, so derate output current if the device will be operated near maximum temperature. This page synthesizes distributor stock, drop-in same-package alternatives, and practical engineering design notes not aggregated in the manufacturer datasheet.

RFQ যোগাযোগ
PIC16C54AT-04I/SO - 8-Bit 4MHz OTP MCU, 768B | Microchip
PIC16C54AT-04I/SO

PIC16C54AT-04I/SO - 8-Bit 4MHz OTP MCU, 768B | Microchip

The Microchip Technology PIC16C54AT-04I/SO is an 8-bit PIC RISC microcontroller with 4 MHz operating speed, 768 bytes (512 x 12) of One-Time-Programmable (OTP) program memory, and 25 bytes of RAM, housed in an 18-pin SOIC package supplied on tape and reel. As a member of the PIC16C5X family, it offers 12 I/O pins, an external oscillator interface, Power-on Reset (POR), and a Watchdog Timer (WDT), with 33 single-word instructions most of which execute in a single 200 ns instruction cycle. Background Knowledge: A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (program + data), and peripherals into one device. Microcontrollers are classified by data bus width (4-bit, 8-bit, 16-bit, 32-bit) and memory technology (ROM, EPROM, OTP, Flash). An OTP (One-Time-Programmable) MCU is programmed once by the user and cannot be erased electrically, making it ideal for low-cost, high-volume production where firmware is finalized. The PIC16C5X family uses a RISC architecture with 12-bit wide instructions that achieve roughly 2:1 code compression versus 8-bit CISC competitors, which historically gave the family strong price/performance positioning in the 1990s and early 2000s. Key features of the PIC16C54AT-04I/SO include its compact 768-byte OTP program memory, 4 MHz maximum clock input (yielding a 1 MHz internal instruction rate), wide operating voltage tolerance of 3.3 V to 5.5 V (the I-grade version), industrial temperature range of -40 °C to +85 °C, low-power CMOS process, and compatibility with the PIC16C5X instruction set. The 18-SOIC package is the industry-standard 7.50 mm wide SOIC footprint, supporting surface-mount assembly on legacy through-hole-replacement boards. Architecturally, the PIC16C54A uses a Harvard memory layout with separate program and data buses, a two-stage pipeline, and 12-bit opcode word width. The CPU has a file-register based data architecture with 32 special-function registers mapped in bank 0. The interrupt-free design relies instead on polled peripherals and software state machines, simplifying deterministic real-time code. Compared to PIC16C54 (original), the "A" silicon revision improves oscillator tolerance and ADC-support readiness, and the "04" speed grade formally rates the device at 4 MHz maximum clock. Typical applications include low-cost consumer appliances, remote-control transmitters, sensor-interface modules, simple timer/counter products, and educational/development kits where a minimal 8-bit MCU suffices. The wide 3.3 V to 5.5 V supply range and industrial temperature make it suitable for both battery-powered and mains-fed industrial control. Because this part is OTP only, it is best chosen where firmware is finalized and volume justifies one-time programming cost. Design consideration: When migrating away from this part, note that the PIC16C5X instruction set is non-upward-compatible with the modern PIC16F1XXX family, so source code must be recompiled. For new designs consider PIC16F54 (Flash, 4 MHz, 18-pin) as a more flexible successor with similar pinout. This page synthesizes distributor pricing, drop-in same-brand PIC16C5X-family alternatives, and practical design notes not included in the manufacturer datasheet summary, providing a single source of information for engineers and procurement teams.

RFQ যোগাযোগ