মাইক্রোকন্ট্রোলার

XMC4100F64F128ABXQMA1 - 80MHz Cortex-M4 128KB MCU | Infineon

Infineon Technologies XMC4100F64F128ABXQMA1 is a 32-bit ARM Cortex-M4 microcontroller operating at 80 MHz, with 128 KB of embedded Flash memory and 20 KB of SRAM, housed in a 64-pin PG-LQFP-64-19 package. The XMC4100 belongs to the XMC4000 family and targets industrial embedded systems requiring deterministic control, communications, and general-purpose processing. An MCU is a semiconductor device that combines a processor core, embedded memory, and peripherals in one integrated circuit. The XMC4100’s ARM Cortex-M4 core implements the ARM Thumb instruction set and provides the processing foundation for an industrial control hierarchy: MCU, embedded microcontroller, real-time control processor, and industrial automation component. Its 128 KB Flash supports firmware and application code, while 20 KB SRAM provides working memory for control algorithms, data buffers, and communication stacks. The XMC4100F64F128ABXQMA1 operates from a 1.3 V or 3.3 V supply and is identified as an industrial-temperature-grade component. Its 80 MHz clock rate supports responsive digital control, while the 32-bit architecture allows efficient handling of wider data values than an 8- or 16-bit processor. The 64-pin LQFP package also exposes a broad set of digital and analog interfaces for sensors, actuators, communications links, and supervisory circuitry. The XMC4000 family combines a Cortex-M4 core with embedded control peripherals designed for industrial equipment. At 128 KB Flash and 20 KB SRAM, this device offers more program and working memory than basic compact MCUs while retaining a 64-pin package suitable for conventional leaded-board assembly. The manufacturer lists XMC4100-F64K128-BA as an industrial Cortex-M4 configuration with the same 128 KB Flash, 20 KB SRAM, and 80 MHz operating frequency. Typical applications include industrial sensor controllers, building automation modules, motor and actuator control, industrial communications equipment, data acquisition systems, and compact embedded gateways. Its 80 MHz processing capability is useful when the firmware must combine control-loop execution with serial communications, diagnostics, and local data processing rather than perform only a simple sequential task. Designers should verify the exact pin functions, peripheral mix, clock requirements, and recommended decoupling in the manufacturer datasheet before layout. The 1.3 V and 3.3 V supply notation describes supported operating conditions rather than a choice of arbitrary rail voltage. PCB planning should preserve the exposed thermal and assembly geometry of the PG-LQFP-64-19 package and route sensitive analog and communication signals away from fast-switching nodes. This page combines the confirmed XMC4000-family specifications, same-package replacement candidates, application guidance, and design considerations needed to evaluate the XMC4100F64F128ABXQMA1 before schematic capture, PCB layout, firmware development, and production sourcing.

XMC4100F64F128BAXQMA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4100F64F128BAXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at up to 80 MHz, with 128 KB of flash memory and 20 KB of SRAM in a 64-pin PG-TQFP-64-19 package. It belongs to the XMC4000 family and combines deterministic microcontroller performance with communication and embedded-control capabilities for motor-drive, industrial automation, and networked embedded systems. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor designed for real-time control systems. Its instruction set, integrated memory, and dedicated peripherals place it within the hierarchy of embedded processor, microcontroller, and industrial semiconductor. The XMC4000 family targets applications that require more deterministic control than a general-purpose application processor while retaining a compact, integrated design. The device provides 128 KB of flash for program storage, 20 KB of SRAM for working data, and a maximum operating frequency of 80 MHz. A 64-pin TQFP package provides a practical surface-mount solution for control boards with moderate pin requirements. The ordering code also identifies a 3.3 V device configuration and an exposed-pad package, allowing compact PCB construction without relying on a large BGA assembly. The XMC4100 is positioned for embedded motor control, motion control, industrial communication, and connected industrial equipment. Its CAN and LIN support makes it suitable for distributed control networks where a controller must exchange diagnostic, status, or command data with remote nodes. The 80 MHz Cortex-M4 core provides computational headroom for control loops and supervisory logic while retaining deterministic peripheral-driven operation. A typical motor-drive design uses the microcontroller to execute current, speed, or position-control algorithms, operate communication interfaces, and supervise external sensors and actuators. In industrial automation equipment, the same device can coordinate analog and digital I/O, perform protocol handling, and implement safe state transitions through firmware. In building and industrial control systems, CAN or LIN connectivity helps reduce wiring complexity between a central controller and distributed modules. PCB design should treat the exposed thermal pad as both a thermal path and a low-impedance ground connection. Follow the manufacturer land-pattern and solder-reflow requirements, place decoupling capacitors close to their supply pins, and preserve a continuous ground plane under the package. Confirm the exact peripheral availability, pin multiplexing, voltage limits, and clock-tree configuration in the manufacturer datasheet before finalizing the schematic. This product page combines the manufacturer’s device description with practical package, application, comparison, and sourcing guidance. The comparison focuses on same-family alternatives that can support a controlled redesign, while the design notes emphasize exposed-pad layout, decoupling, firmware portability, and qualification checks for production use.

XMC4100F64K128ABXQSA1 - 80MHz Cortex-M4 MCU | Infineon

The Infineon XMC4100F64K128ABXQSA1 is a 32-bit Arm Cortex-M4 microcontroller operating at 80 MHz, with 128 KB of flash memory, 20 KB of SRAM, and a 64-pin LQFP exposed-pad package. It belongs to the XMC4000 industrial microcontroller family and supports the XMC4000 peripheral set for embedded control, communications, and real-time applications. A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, volatile data memory, peripherals, and interface control logic. The Cortex-M4 architecture provides a 32-bit processing platform with deterministic interrupt handling, while the XMC integration adds industrial-oriented peripherals and communication interfaces. The XMC4100F64K128ABXQSA1 therefore occupies the microcontroller -> embedded processor -> industrial control IC hierarchy. The principal device parameters are an 80 MHz Arm Cortex-M4 core, 128 KB of flash, 20 KB of SRAM, and a 3.3 V operating supply identified for this ordering code. Its documented connectivity includes CAN, I2C, LIN, SPI, UART/USART, and USB interfaces. These interfaces make the device suitable for distributed industrial controllers, motor-control gateways, and connected sensor systems requiring several communications protocols. The XMC4000 platform combines a 32-bit core with hardware peripherals for communication and control. Its 128 KB flash provides room for an embedded application, boot logic, and configuration data, while 20 KB of SRAM supports working memory and peripheral buffers. The 80 MHz clock rate allows the processor to service multiple interrupts and communication tasks, although final performance depends on peripheral configuration, memory latency, and the selected toolchain and operating system. Typical uses include industrial communication controllers, CAN-to-serial gateways, LIN-based body and factory nodes, USB-to-fieldbus adapters, sensor-hub controllers, and compact motor-control modules. A 64-pin LQFP exposed-pad package also provides a conventional PCB footprint and a thermal pad for distributing heat through the board structure. Designers should review the manufacturer pin-description table and electrical characteristics before assigning analog, communications, debug, clock, and power pins. Decoupling, exposed-pad soldering, clock stability, unused-pin treatment, and startup configuration must follow the XMC4100/XMC4200 datasheet and reference manual. This product page combines the exact ordering-code characteristics with an application-focused selection guide, interface recommendations, comparison parameters, and practical PCB guidance. These engineering-oriented details help teams evaluate the XMC4100F64K128ABXQSA1 without reducing the selection decision to processor speed and flash memory alone.

XMC4100F64K128BAXQMA1 - 80MHz Cortex-M4 MCU | Infineon

The Infineon Technologies XMC4100F64K128BAXQMA1 is an industrial 32-bit ARM Cortex-M4 microcontroller with an 80 MHz operating frequency, 128 KB of flash memory, and 20 KB of SRAM in a 64-pin PG-LQFP-19 package. It combines deterministic control capability with integrated DMA, I2S, LED control, power-on reset, PWM generation, and watchdog functions, making it suitable for industrial motor-control, communications, and embedded automation systems. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and interrupt control into one device. The XMC4100 belongs to Infineon's XMC4000 family, where the ARM Cortex-M4 core is used in the hierarchy Cortex-M4 processor → 32-bit microcontroller → embedded microcontroller → industrial semiconductor. Its combination of 128 KB flash, 20 KB SRAM, and 80 MHz execution speed provides a practical balance between firmware capacity, real-time processing, and package size. Key features include the 80 MHz ARM Cortex-M4 processor core, 128 KB flash organized as 128K × 8, and 20 KB SRAM. On-chip resources include DMA for efficient data movement, I2S for digital audio data transfer, PWM generation for motor or power-converter control, an LED-control peripheral, a power-on reset function, and a watchdog timer. These integrated blocks reduce external component requirements and allow control software to service multiple deterministic tasks. The 64-pin LQFP package provides conventional leaded soldering access while supporting a board footprint identified as PG-LQFP-64-19. The industrial XMC4100-F64K128-BA device variant is explicitly presented by Infineon as an industrial ARM Cortex-M4 microcontroller. Its 80 MHz core is suitable for sampled control loops and protocol handling, while DMA reduces processor intervention when transferring data between memory and serial peripherals. Typical uses include industrial motor controllers, distributed automation nodes, digital audio interfaces, LED control systems, and embedded communications equipment. For motor-control designs, the PWM and DMA resources can support deterministic actuator timing, while the I2S interface can serve synchronous digital-audio paths. The 128 KB flash region accommodates control code, configuration tables, and field-update routines, while 20 KB SRAM supports working state and communication buffers. When designing a board, validate the exact package pin mapping, exposed-pad connection, decoupling requirements, clock configuration, and peripheral instance assignments against the manufacturer datasheet. Firmware should include watchdog servicing, controlled reset behavior, and graceful handling of communications loss. Production programming and lifecycle decisions should also use the ordering code rather than assuming that every XMC4100 package variant is electrically or pin compatible. This product page consolidates verified distributor availability, manufacturer specifications, package information, and honest drop-in replacement findings. It distinguishes verified electrical identity from unverified peripheral deltas, helping engineers review availability, procurement, firmware compatibility, and PCB reuse without relying on speculative substitutions.

XMC4100Q48F128ABXUMA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4100Q48F128ABXUMA1 is a 32-bit ARM Cortex-M4 microcontroller operating at up to 80 MHz, with 128 KB of Flash memory organized as 128K x 8 and supplied in a 48-pin PG-VQFN-53 surface-mount package with an exposed pad. It belongs to the Infineon XMC4000 family and is designed for embedded industrial control applications requiring deterministic real-time performance, compact packaging, and integrated microcontroller resources. An ARM Cortex-M4 microcontroller is a reduced-instruction-set processor within the broader 32-bit embedded MCU category. It combines a processor core, Flash program memory, SRAM, communications peripherals, timers, and GPIO in one device. The XMC4000 family extends this architecture into industrial control systems where compact embedded processing, real-time interrupt handling, and deterministic peripheral interfaces are central design requirements. Key characteristics of the XMC4100Q48F128ABXUMA1 include an 80 MHz maximum clock, 128 KB of 128K x 8 Flash, a 32-bit architecture, and a 3.3 V supply designation. The 48-VFQFN package with exposed pad supports compact surface-mount construction and provides a central thermal and electrical land area. Tape-and-reel packaging is identified for this ordering configuration, supporting automated production and standard component handling. The XMC4000 architecture is positioned between basic Cortex-M microcontrollers and more complex application processors. It provides dedicated real-time capabilities suited to industrial automation, motor-control, communications, and embedded control systems. Its 80 MHz operating point supports timely peripheral servicing and control-loop execution, while the integrated Flash supports embedded firmware, configuration data, and application code within a single package. Typical uses include industrial automation controllers, communication equipment, motor-control systems, data acquisition modules, and compact embedded control platforms. The Cortex-M4 software ecosystem supports development with embedded IDEs, debug probes, compilers, and configuration tools designed for ARM-based microcontrollers. Firmware architecture should be checked against the selected peripherals, memory map, pin multiplexing, and device errata before production release. A key design consideration is thermal management around the exposed pad. Follow the Infineon land-pattern, solder, and exposed-pad requirements in the XMC4100/XMC4200 datasheet, and connect the thermal land to the appropriate ground plane and copper area. Decoupling, signal routing, and unused-pin treatment must also follow the manufacturer’s board-level guidance to preserve signal integrity and reliable operation. This page combines the exact ordering and package information, technical specifications, practical application guidance, comparison data, and engineering design notes for the XMC4100Q48F128ABXUMA1. It is intended to help hardware and firmware engineers assess the device, plan its implementation, and identify same-family alternatives without overlooking package, memory, or peripheral differences.

XMC4100Q48F128BAXUMA1 - 80MHz Cortex-M4 MCU | Infineon

The Infineon XMC4100Q48F128BAXUMA1 is a 32-bit industrial Arm Cortex-M4 microcontroller operating at up to 80 MHz, with 128 KB of embedded Flash memory and 20 KB of SRAM in a 48-pin PG-VQFN package with an exposed pad. It is designed for embedded motor-drive, motion-control, CAN, and LIN applications requiring deterministic real-time control and integrated connectivity. An Arm Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor core integrated with memory, communication peripherals, timers, analog conversion functions, and general-purpose input/output. Within the product hierarchy, Cortex-M4 belongs to the Arm Cortex-M embedded family, while the XMC4100 device is an industrial microcontroller and embedded processing system designed for control-oriented applications. The XMC4100Q48F128BAXUMA1 combines 128 KB of Flash with 20 KB of SRAM, an 80 MHz maximum clock, and a 3.13 V to 3.63 V operating-supply range. Its 12-bit conversion capability and CAN/LIN connectivity support motor-control, communications, and industrial automation designs. The -40 °C to +85 °C industrial temperature range supports use in factory automation, industrial networking, and motion-control equipment. The Arm Cortex-M4 architecture provides a balanced combination of processing performance and peripheral integration for embedded control. A 128 KB Flash allocation supports a bootloader and application code, while 20 KB of SRAM provides working memory for control loops and communications. Because the device targets a 3.3 V supply class, power sequencing, input levels, and exposed-pad layout must be handled according to the manufacturer datasheet during PCB implementation. Typical uses include fieldbus-connected motor controllers, servo and stepper-motor control platforms, industrial sensor nodes, CAN or LIN gateways, and compact automation equipment. The device is particularly appropriate when a design needs CAN and LIN support, an industrial temperature range, and a deterministic Cortex-M4 core without adopting a larger performance class. Use the exposed-pad assembly and pin-connection guidance in the manufacturer datasheet, and place decoupling capacitors close to the supply pins. Confirm thermal performance at the highest ambient temperature and worst-case processing load, because the exposed pad is an important thermal path but does not replace the layout and copper requirements of the package. This page combines the Infineon product specifications with package details, application guidance, comparison parameters, and verified drop-in assessment for engineers evaluating an XMC4000-family replacement or an industrial Cortex-M4 design.

XMC4100Q48K128ABXLSA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4100Q48K128ABXLSA1 is a 32-bit ARM Cortex-M4 industrial microcontroller operating up to 80 MHz, with 128 KB of flash memory and 20 KB of SRAM in a 48-pin VQFN package. It combines a single Cortex-M4 processing core with embedded peripherals for connected industrial, embedded control, communications, and automation systems. An ARM Cortex-M4 microcontroller is a 32-bit reduced-instruction-computing processor within the embedded MCU hierarchy. It integrates CPU logic, program memory, data memory, interrupt control, timers, communications peripherals, and digital I/O on one device. The XMC4100 is based on the XMC4000 industrial-microcontroller series and is designed for applications that require deterministic embedded processing alongside multiple communication and control interfaces. The XMC4100Q48K128ABXLSA1 provides 128 KB of flash organized as 128K by 8 bits, 20 KB of SRAM, and a maximum operating frequency of 80 MHz. According to the Infineon product page, the device is an industrial ARM Cortex-M4 microcontroller. Its combination of embedded memory, a compact VQFN-48 package, and integrated peripherals supports space-constrained control boards that require more processing capability than an 8-bit or 16-bit controller. The XMC4000 architecture integrates a single Cortex-M4 core with the peripherals required for industrial embedded systems. Distributed listings identify the exact device as a single-core 32-bit microcontroller with 80 MHz maximum clock operation. This performance supports responsive control loops, protocol handling, supervisory logic, and human-machine-interface updates while retaining the simplicity of a single-chip embedded design. Typical uses include industrial automation controllers, building automation equipment, sensor and actuator hubs, communications modules, motor-control supervisory systems, and compact embedded gateways. The 48-pin VQFN package limits board area and supports high-density PCB layouts, while the exposed-pad construction requires careful thermal-pad and copper-layout treatment to transfer heat away from the device. Design the XMC4100Q48K128ABXLSA1 within its documented voltage, temperature, clock, and peripheral limits. Confirm the complete pin assignment and exposed-pad connection from the Infineon XMC4100-Q48x128 datasheet. Follow the recommended decoupling, clock, reset, and layout practices in the manufacturer's reference documentation rather than inferring connections from another 48-pin microcontroller. This product page combines the manufacturer's device description with distributor specifications, practical PCB guidance, a concise engineering selection guide, and verified lifecycle information. It helps engineers determine whether the 80 MHz Cortex-M4 core, 128 KB flash, 20 KB SRAM, and 48-pin VQFN package align with a new industrial or embedded-control design.

XMC4100Q48K128ABXUMA1 - 80MHz Cortex-M4 MCU | Infineon

The Infineon Technologies XMC4100Q48K128ABXUMA1 is a 32-bit Arm Cortex-M4 microcontroller in the XMC4000 family, featuring an 80 MHz maximum operating frequency, 128 KB of Flash program memory, and 20 KB of SRAM in a PG-VQFN-48-22 package. It is designed for embedded industrial, motor-control, and motion-control applications that require deterministic control, CAN/LIN connectivity, and a compact surface-mount footprint. The microcontroller combines a 32-bit RISC core with on-chip timers, PWM control, communication peripherals, and GPIO resources for connected industrial equipment. An Arm Cortex-M4 microcontroller is a 32-bit embedded processing device built around the ARM Cortex-M4 processor core. This MCU family belongs to the hierarchy of embedded processors, microcontrollers, and semiconductor devices used in real-time control systems. Unlike a general-purpose application processor, the XMC4100 is designed for compact, deterministic embedded operation where peripherals, interrupt handling, timing, and low board area are central to the design. Key features include 128 KB of Flash for firmware and 20 KB of SRAM for working memory, an 80 MHz maximum clock, and integrated CAN/LIN networking suitable for industrial communications. The 48-pin VQFN package supports a dense PCB layout while exposing the required digital interfaces and control resources. The part is identified as an industrial XMC4000-family device, making it appropriate for motor drives, motion control, and connected automation systems. The XMC4100 architecture is intended for real-time embedded control, where timer and PWM peripherals can generate deterministic control signals while CAN and LIN interfaces connect the controller to sensors, actuators, and system networks. The 128 KB Flash capacity provides practical space for control algorithms, communication stacks, diagnostics, and parameter storage, while the 20 KB SRAM supports working state, buffers, and interrupt-driven routines. Typical uses include industrial motor-drive controllers, motion-control modules, distributed automation nodes, CAN-connected equipment, LIN subnetwork controllers, and compact embedded control systems. CAN/LIN networking and timer/PWM resources make the device useful where multiple nodes must coordinate sensor inputs and actuator outputs within a deterministic control loop. Designers should verify the exact peripheral assignment, pin multiplexing, electrical limits, exposed-pad requirements, and package drawing against the manufacturer datasheet before layout. The VQFN-48-22 package has a central exposed thermal pad and requires careful soldermask and thermal design. Firmware development should account for startup configuration, clock setup, peripheral initialization, and the CAN/LIN interrupt requirements of the target system. This page summarizes the verified manufacturer and distributor specifications for the XMC4100Q48K128ABXUMA1 and adds practical guidance for selecting, comparing, and integrating the microcontroller. Pricing and lifecycle details should be confirmed from current distributor inventory because the supplied search data confirms product availability information but does not provide a price table.

XMC4100Q48K128BAXUMA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4100Q48K128BAXUMA1 is a 32-bit Arm Cortex-M4 microcontroller in the XMC4000 family, operating at up to 80 MHz with 128 KB of Flash memory and 20 KB of SRAM. The device is supplied in a 48-pin PG-VQFN package with an exposed pad for compact industrial embedded designs. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. In the product hierarchy, the XMC4100Q48K128BAXUMA1 is a 32-bit MCU, an embedded processing IC, and a member of the Arm Cortex-M4 microcontroller family. Its industrial positioning supports applications where deterministic real-time control, communications, and compact embedded processing are required. The principal specifications include an Arm Cortex-M4 processor core, a maximum clock frequency of 80 MHz, 128 KB of Flash, and 20 KB of SRAM. Product information also identifies CAN and LIN networking support, which makes the device suitable for distributed industrial and automotive-style control systems. A 3.3 V operating supply is listed for this ordered variant. The XMC4000 architecture combines a 32-bit RISC core with embedded Flash and SRAM in a single package. Flash retains firmware and configuration data without an external memory device, while SRAM supports working memory, stack operations, and interrupt-driven control tasks. The 48-pin VQFN form factor also reduces board area compared with larger leaded packages, although the exposed thermal pad requires careful PCB layout and adequate copper for heat dissipation. Typical applications include industrial motor drives, motion control, CAN-connected automation equipment, LIN sub-networks in distributed controllers, and embedded sensor-conditioning systems. Its combination of 80 MHz processing, 20 KB SRAM, and CAN/LIN connectivity is particularly useful when a controller must execute real-time algorithms while exchanging data with remote modules. For PCB implementation, follow the manufacturer package drawing and pin-description table for the exact XMC4100-Q48K128-BA footprint. Connect the exposed pad to the appropriate ground plane, place decoupling capacitors close to the supply pins, and route high-current and communication interfaces away from sensitive analog sections. Confirm pin multiplexing, operating limits, startup behavior, and peripheral assignments against the manufacturer datasheet before releasing a layout. This page combines the exact orderable MPN with verified core specifications, package information, practical applications, design guidance, and an evidence-based comparison with the closest identified same-family candidate.

XMC4104F64F128ABXQMA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon XMC4104F64F128ABXQMA1 is a 32-bit ARM Cortex-M4 microcontroller operating at up to 80 MHz, with 128 KB of embedded flash memory and a 64-pin PG-LQFP-19 package. The device belongs to the XMC4000 family and combines a 32-bit processor core with embedded control, communications, and industrial-oriented peripherals in one integrated circuit. A microcontroller is a programmable system-on-chip that executes firmware, reads inputs, controls outputs, and manages communication interfaces. In the product hierarchy, this device belongs to the ARM Cortex-M4 microcontroller class, within embedded processors and integrated circuits. Its 80 MHz operating rate supports responsive control loops, while 128 KB of flash provides fixed on-chip program storage for firmware, configuration data, and boot code. The XMC4104F64F128ABXQMA1 provides a 64-pin LQFP package with an exposed pad and a 1.3 V operating-supply value identified in the product listing. Its 128K x 8 flash organization provides 1,024,768 bits of programmable storage. The 32-bit architecture supports efficient handling of sensor data, digital control state machines, communications, and supervisory tasks without requiring an external processor. The XMC4000 family architecture is designed for embedded control systems where deterministic peripheral access, compact packaging, and integration are important. The PG-LQFP-64-19 format offers accessible leads for conventional assembly and inspection, while the exposed thermal pad helps transfer heat from the device into the PCB copper plane. Exact peripheral assignments, memory-map details, clock limits, and electrical maximum ratings must be confirmed in the manufacturer datasheet before schematic or firmware sign-off. Typical uses include industrial automation modules, motor-control peripherals, sensor-hub controllers, communications equipment, and embedded gateway functions. In each case, the device can collect digital or analog inputs, execute control algorithms, and coordinate communications through its integrated peripherals. An exposed-pad PCB design is essential because the package relies on effective heat conduction to maintain reliable operation under sustained processing load. When laying out the PCB, reserve the exposed pad according to the manufacturer land-pattern and thermal-pad guidance, connect it to the appropriate ground reference, and place decoupling capacitors close to the power pins. Validate the external clock, reset, boot configuration, and unused-pin connections against the datasheet pin-description table. Firmware development should also account for the device identifier, flash programming procedure, and peripheral initialization sequence. This product reference consolidates the confirmed core, memory, speed, package, and sourcing details with practical PCB guidance, pin-data limitations, and same-family drop-in options. For an exact schematic or firmware migration, verify package pinout, supply sequencing, peripheral equivalence, and lifecycle status against the current Infineon documentation.

XMC4104F64F128BAXQMA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4104F64F128BAXQMA1 is a 32-bit ARM Cortex-M4 microcontroller operating up to 80 MHz, with 128 KB of flash memory and 20 KB of SRAM in a PG-TQFP-64-19 package. The industrial XMC4000-series device integrates CAN and LIN networking interfaces for motor-drive, motion-control, and distributed embedded systems. Its 64-pin package provides a practical balance between processing performance, connectivity, and board-space efficiency. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile data memory, peripherals, and communication interfaces into one device. The ARM Cortex-M4 core provides a compact instruction set and event-driven operation suitable for real-time control. Within the product hierarchy, XMC4104F64F128BAXQMA1 belongs to the XMC4000 family of industrial Cortex-M4 microcontrollers and combines general-purpose control with embedded CAN and LIN connectivity. Three principal characteristics define this component: an 80 MHz maximum operating frequency, 128 KB of flash organized as 128K x 8, and 20 KB of SRAM. These resources support moderately complex control algorithms, protocol stacks, parameter storage, and real-time peripheral management without requiring an external memory interface. The single-core 32-bit RISC architecture provides efficient instruction execution while the XMC4000 peripheral set connects the processor to industrial communication and timing functions. The PG-TQFP-64-19 package exposes 64 pins and is also described as an LQFP-64 with exposed-pad construction. This land pattern accommodates digital communication, analog input, timing, and debug connections while supporting conventional surface-mount assembly. The industrial-grade ordering designation reflects its intended use in industrial equipment, although the exact temperature limits and qualification classifications should be confirmed against the manufacturer datasheet before final component approval. Typical uses include CAN-connected motor controllers, LIN sub-networks in distributed automotive and industrial systems, sensor-hub electronics, industrial automation modules, and compact motion-control equipment. CAN and LIN support allow the controller to exchange data with remote sensors and actuators while the Cortex-M4 core performs control calculations. The 128 KB flash capacity is suitable for embedded firmware, communication handlers, and configuration logic, while 20 KB of SRAM supports working state, buffers, and stack usage. Board design should preserve clean high-frequency return paths around the processor and exposed pad, provide robust decoupling at each supply pin, and route communications away from sensitive analog inputs. The exposed pad requires an appropriate thermal and electrical land pattern and should be connected according to the manufacturer package guidance. Firmware development also depends on the correct device headers, startup code, peripheral configuration, and debugger support for the exact ordering code. This product page organizes the manufacturer specifications, sourcing parameters, package information, verified alternatives, and practical design considerations into a single engineering reference. It also distinguishes a true same-footprint replacement from a merely similar microcontroller, helping designers verify software support, peripheral compatibility, and PCB reuse before committing to a substitution.

XMC4104F64F64ABXQMA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4104F64F64ABXQMA1 is a 32-bit ARM Cortex-M4 microcontroller operating at 80 MHz, with 64 KB of flash memory and a 64-pin PG-LQFP-64-19 package. The device belongs to the XMC4000 family for industrial applications and operates from a 3.3 V supply. An ARM Cortex-M4 microcontroller is a reduced-instruction-set processor integrated with memory, peripherals, and communication interfaces on one semiconductor die. The Cortex-M4 core belongs to the ARM processor family and is designed for embedded control, where deterministic execution, efficient interrupt handling, and compact software support are important. In the product hierarchy, it is an MCU, then an embedded processor, and ultimately a semiconductor intended for industrial control systems. The XMC4104F64F64ABXQMA1 combines an 80 MHz Cortex-M4 core with 64 KB of flash organized as 64K × 8. Its 64-pin PG-LQFP-64-19 package provides a conventional gull-wing surface-mount footprint with an exposed-pad package designation in the verified distributor data. An industrial temperature grade and 3.3 V operating supply make the device appropriate for embedded automation and industrial control equipment. The XMC4000 family is positioned for energy-efficient, high-performance industrial applications. The Cortex-M4 architecture supports compact control code while the operating frequency allows more computational work than basic 8-bit or 16-bit alternatives. Exact RAM capacity, peripheral inventory, analog performance, and electrical limits are not present in the supplied source records and therefore require confirmation from the manufacturer datasheet before design release. Typical uses include industrial motor and motion control, PLC peripherals, factory automation modules, sensor conditioning, industrial communications, and embedded measurement equipment. The 64 KB flash capacity is appropriate for control firmware, boot logic, communication protocols, and parameter storage, while the 80 MHz operating rate supports responsive supervisory and signal-processing tasks. Design engineers should verify the exposed-pad connection, decoupling requirements, clock limits, and unused-pin treatment directly against the manufacturer pinout. A 3.3 V supply alone does not establish the complete operating envelope; input tolerances, IO thresholds, maximum frequency, and power consumption must be confirmed before schematic and PCB decisions are finalized. This product record consolidates verified distributor specifications, procurement links, package information, and engineering guidance. It also distinguishes documented drop-in candidates from unverified substitutes so procurement teams can assess compatibility without treating same-package or broadly similar devices as guaranteed pin-compatible replacements.

XMC4104F64F64BAXQMA1 - 80MHz Cortex-M4 64KB MCU | Infineon

The Infineon Technologies XMC4104F64F64BAXQMA1 is a 32-bit ARM Cortex-M4 microcontroller operating at 80 MHz, with 64 KB of flash memory and a 64-pin PG-TQFP-19 package. It belongs to the XMC4000 family of industrial microcontrollers, combining a 32-bit RISC core with embedded flash and a set of industrial-oriented peripherals in a surface-mount package. The verified distributor listing specifies 64 KB (64K x 8) flash and an 80 MHz operating frequency. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. In the product hierarchy, this XMC part is an ARM Cortex-M4 microcontroller, an embedded 32-bit RISC controller, and an industrial microcontroller IC. The Cortex-M4 architecture is designed for compact control systems, while the XMC4000 family adds Infineon's industrial-oriented peripheral and connectivity ecosystem. The principal verified characteristics are an 80 MHz Cortex-M4 core, 64 KB of embedded flash, 32-bit processing, and a 64-pin PG-TQFP-19 package. These attributes make the device applicable where deterministic embedded control, compact software support, and a relatively high pin count are useful. The exact RAM size, operating-voltage range, analog functions, digital peripherals, temperature limits, and package dimensions were not included in the supplied verified data and therefore require confirmation from the manufacturer datasheet. The XMC4000 family is described by available sources as an industrial Cortex-M4 platform intended to combine processing performance with embedded-system functionality. Its architecture supports the familiar ARM Cortex-M software ecosystem, while the exact peripheral mapping and register-level behavior depend on the selected XMC4100/XMC4200-series derivative. Firmware development should therefore use the documentation and device support associated with the exact orderable part number rather than relying on family-level assumptions. Typical use cases include industrial automation, sensor acquisition and control, motor or machine control, industrial communications, embedded gateway equipment, and compact control modules. The 64-pin package provides more external interface options than lower-pin-count Cortex-M4 devices, although the verified snippets do not identify which peripheral signals appear on each package pin. Designers should review the pinout, alternate-function matrix, power requirements, and exposed-pad connection before layout release. A key design consideration is that the supplied evidence establishes the core frequency, flash capacity, architecture, and package, but not a complete electrical characterization. Power rails, decoupling, clock tolerance, ADC performance, communication interfaces, and timing margins must be checked against the authoritative XMC4000 datasheet. Firmware bring-up should also include appropriate startup configuration, watchdog handling, brownout behavior, and peripheral pin assignment. This page combines verified distributor specifications, sourcing information, same-package replacement analysis, comparison parameters, and practical engineering cautions. It separates confirmed facts from unavailable data so engineers can rapidly identify the XMC4104F64F64BAXQMA1's role while avoiding unsupported assumptions about electrical ratings, peripheral functions, or drop-in compatibility.

XMC4104F64K128ABXQSA1 - 80MHz Cortex-M4 128KB | Infineon

Infineon Technologies XMC4104F64K128ABXQSA1 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at 80 MHz with 128 KB of flash memory, 20 KB of SRAM, and a 64-pin LQFP exposed-pad package. The device operates from a 1.3 V or 3.3 V supply and is designed for automotive-grade industrial and transportation systems requiring deterministic real-time control. A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication peripherals, timers, and analog interfaces on one device. The XMC4104F64K128ABXQSA1 belongs to the ARM Cortex-M4 microcontroller hierarchy, combining the Cortex-M4 instruction set with Infineon automotive peripherals. Its role within a larger embedded system is to execute control software, acquire sensor data, operate communication links, and generate precise timing signals for actuators and power-conversion equipment. The headline features include an 80 MHz ARM Cortex-M4 core, 128 KB of flash program memory, and 20 KB of SRAM. The memory configuration supports moderately complex control loops and embedded protocols while retaining a compact footprint. Integrated connectivity includes CAN, I2C, LIN, SPI, UART/USART, and USB interfaces, allowing the controller to connect sensors, actuators, transceivers, and service interfaces without requiring a separate communications controller. The single-core Cortex-M4 architecture uses a 32-bit register set and supports real-time embedded workloads. In the XMC4000 family, dedicated peripherals handle communication and timing functions close to the processor, reducing software overhead and helping deterministic control. The exposed pad beneath the LQFP package provides an electrical and thermal connection to the board and requires careful land-pattern and solder-paste design. Device-specific pin multiplexing, clock behavior, and peripheral assignments should be verified against the manufacturer pin-description tables before PCB routing. Typical applications include automotive body and comfort controllers, industrial automation modules, electric motor-control systems, CAN-based node controllers, and connected sensing platforms. The combination of CAN, LIN, USB, and multiple serial interfaces makes the device especially useful in distributed embedded systems. It can also serve as a supervisory controller in battery, charging, or power-management equipment where deterministic timing and peripheral integration are important. Designers should account for the difference between 1.3 V and 3.3 V operating configurations, including internal supply and I/O requirements. The exposed-pad land pattern, via arrangement, and thermal-via count should follow the Infineon package recommendations closely. Firmware development requires the XMC4000 device-family pack and appropriate startup, linker, driver, and debugging configuration; the Arm Keil device page confirms Cortex-M4 support and the XMC4000_DFP device-family pack. This page combines the exact XMC4104F64K128ABXQSA1 identification, memory and interface details, same-package alternatives, comparison parameters, and practical implementation guidance to support component selection, schematic review, PCB planning, firmware setup, and sourcing without relying on generic microcontroller descriptions.

XMC4104F64K128BAXQMA1 - 80MHz Cortex-M4 128KB MCU | Infineon

Infineon Technologies XMC4104F64K128BAXQMA1 is a 32-bit Arm Cortex-M4 microcontroller designed for industrial embedded control, operating at up to 80 MHz with 128 KB of embedded flash memory and 20 KB of SRAM. The device is identified with the PG-LQFP-64-19 package designation and is supplied as a 64-lead low-profile quad flat pack. The XMC4104 belongs to the XMC4000 family of 32-bit microcontrollers. A microcontroller integrates a processor core, flash program memory, SRAM, peripheral interfaces, clocking, interrupt control, and debug support into one package. This makes the XMC4104 suitable for applications that require deterministic real-time behavior, moderate embedded storage, and a compact industrial control footprint rather than a separate processor, memory, and interface devices. Key features include an Arm Cortex-M4 processor operating at 80 MHz, 128 KB flash, and 20 KB SRAM. The product page identifies the family as an industrial microcontroller, while distributor records identify the package as PG-LQFP-64-19 and the memory organization as 128K x 8. The 3.3 V operating voltage listed in distributor documentation provides the primary supply reference for board-level design. The Arm Cortex-M4 architecture supports efficient control-oriented instruction execution and is commonly used for motor control, industrial automation, communications, embedded instrumentation, and real-time peripherals. The 128 KB flash region is suitable for application firmware, while the 20 KB SRAM supports working memory, stack space, buffers, and interrupt or communication data structures. Exact peripheral assignments, clock limits, temperature limits, and electrical timing values should be confirmed against the manufacturer datasheet before layout or firmware release. Typical XMC4104 designs include industrial controllers, sensor and actuator interfaces, communication gateways, embedded automation equipment, and compact motor-control systems. The 64-pin package provides more external connection options than smaller microcontroller packages, allowing designers to assign peripheral signals, debug interfaces, communications, timers, and analog functions according to the device pin description. For PCB design, preserve the exposed-pad and thermal requirements defined by the manufacturer package drawing, route sensitive analog and communication interfaces away from switching nodes, and provide decoupling close to the supply pins. Firmware development should use the Arm Cortex-M4 programming and debug workflow supported by the selected development toolchain. This product page combines manufacturer identification, package information, memory and clock specifications, practical application guidance, and structured sourcing information to accelerate component selection and design review.

XMC4104F64K64ABXQSA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4104F64K64ABXQSA1 is a 32-bit ARM Cortex-M4 microcontroller operating at 80 MHz, with 64 KB of flash memory, 20 KB of SRAM, and a 64-pin PG-LQFP package. The automotive-temperature ordering code combines an Arm Cortex-M4 microcontroller with embedded flash, SRAM, digital interfaces, and timing resources in a surface-mount package designed for industrial and automotive-grade control systems. An ARM Cortex-M4 microcontroller is a 32-bit reduced-instruction-set-computing core within the broader ARM Cortex-M family. XMC devices integrate that processor core with memories, clock-generation circuitry, communications peripherals, analog functions, and GPIO into a single mixed-signal IC. The XMC4000 family targets embedded control applications where deterministic execution, compact real-time peripherals, and direct access to on-chip flash and SRAM are more important than a large external memory interface. The verified device data identifies an operating frequency of 80 MHz, 64 KB of program flash, and 20 KB of SRAM. The ordering information specifies 1.3 V and 3.3 V supply operation, while the listed industrial family variant supports an ambient temperature range from -40 °C to +125 °C. The target uses a PG-LQFP-64 package with 64 gull-wing terminals and an exposed thermal-pad package designation, allowing compact PCB integration while improving thermal conduction through the board. The XMC4000 architecture supports embedded firmware execution without external program storage, reducing board complexity in control-oriented products. At 80 MHz, the CPU provides substantially greater processing headroom than basic 8-bit or 16-bit controllers for multitasking, state-machine execution, communications protocol handling, and supervisory logic. Its 64 KB flash allocation stores application code and configuration data, while 20 KB of SRAM accommodates working memory, stack space, buffers, and peripheral data. Typical uses include industrial automation modules, motor and motion-control controllers, connected industrial sensors, building automation equipment, and automotive peripheral control units. The combination of 64 KB flash, 20 KB SRAM, an 80 MHz Cortex-M4 core, and a 64-pin package is particularly useful for compact controllers that need multiple digital interfaces and deterministic embedded behavior without carrying a larger external memory subsystem. Designers should confirm the complete pin assignment, peripheral mix, clock limits, supply sequencing, and exposed-pad connection requirements from the manufacturer datasheet before layout. The PG-LQFP-64 footprint is mechanically demanding for fine-pitch assembly, and the exposed thermal pad should be connected to the appropriate ground plane with thermal-via placement that balances electrical return paths and manufacturability. This product page consolidates the verified manufacturer and distributor specifications, package details, purchasing guidance, and engineering-focused design considerations. It also distinguishes confirmed characteristics from parameters that remain unavailable in the supplied source data, helping engineers avoid treating inferred or unverified values as manufacturer specifications.

XMC4104F64K64BAXQMA1 - 80MHz Cortex-M4 MCU | Infineon

The Infineon XMC4104F64K64BAXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller operating at up to 80 MHz, with 64 KB of flash memory and 20 KB of SRAM in a PG-LQFP-64-19 package with exposed pad. The device belongs to Infineon's XMC4000 family and combines a 3.3 V supply requirement with mixed-signal, timer-driven industrial control connectivity including CAN, LIN, and USB. An ARM Cortex-M4 microcontroller is a 32-bit embedded processor designed for deterministic control systems. Positioned within the hierarchy of microcontroller, embedded processor, and semiconductor, it executes firmware while integrating timers, communication interfaces, analog functions, and general-purpose input/output on one device. The XMC4104F64K64BAXQMA1 is therefore more than a general CPU: it provides an integrated platform for industrial motor, timer, communication, and mixed-signal control designs. The principal features are an 80 MHz Cortex-M4 core, 64 KB flash, 20 KB SRAM, and operation from -40°C to +125°C. These ratings support compact embedded programs, deterministic peripheral operation, and deployment across industrial temperature ranges. Its industrial ordering designation, BA package, 64 KB memory configuration, and exposed-pad LQFP construction distinguish it from general-purpose 64-pin microcontrollers with different memory maps or peripheral mixes. Technically, the XMC4000 architecture targets applications combining high-resolution timers with field-bus communications and mixed-signal control. The Cortex-M4 processing capability provides sufficient throughput for communication stacks and supervisory logic, while 20 KB of SRAM supports working data and interrupt context. Because its exact peripheral assignments, clock-tree limits, electrical characteristics, and pin functions require the manufacturer documentation, designers should consult the Infineon product documentation before finalizing a board. Typical applications include industrial timer and motion-control modules, CAN-connected factory equipment, LIN-based automotive or industrial subsystems, USB service interfaces, and mixed-signal controllers. The -40°C to +125°C range makes the device suitable for industrial environments, while its exposed-pad LQFP package supports PCB-level heat dissipation when the operating conditions require it. The primary design consideration is footprint and firmware verification: the exact PG-LQFP-64-19 land pattern, exposed-pad connection, pin multiplexing, and peripheral resources must match the intended schematic and PCB. A replacement should not be assumed compatible merely because it uses a 64-pin package; memory size, peripheral mapping, clock behavior, and exposed-pad requirements must all be checked. This page consolidates the verified manufacturer and distributor information for the XMC4104F64K64BAXQMA1, adds practical sourcing and comparison guidance, and clearly separates confirmed specifications from data that still requires confirmation from the complete Infineon datasheet.

XMC4104Q48F128ABXUMA1 - 80MHz Cortex-M4 128KB Flash MCU | Infineon

Infineon Technologies XMC4104Q48F128ABXUMA1 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at 80 MHz with 128 KB of flash memory and 20 KB of SRAM. The device is packaged in a 48-pin VQFN configuration with an exposed pad and is supplied in tape-and-reel packaging. Its industrial product designation emphasizes its use as an embedded control component for connected automation, instrumentation, and industrial equipment. A microcontroller is a semiconductor that integrates a processor core, program memory, data memory, and peripheral interfaces on one device. The ARM Cortex-M4 core belongs to the microcontroller and embedded-processing hierarchy, where real-time control code executes from flash while SRAM holds working data and stack information. In the XMC4000 family, this combination supports compact control designs that require deterministic software execution without a separate external processor. The XMC4104-Q48F128-BA ordering designation identifies an industrial Cortex-M4 device with an 80 MHz operating frequency, 128 KB of flash, and 20 KB of SRAM. The complete ordering code adds the package, temperature-range, qualification, and shipping identifiers used to distinguish a purchasable configuration. Tape-and-reel presentation is appropriate for automated component placement and high-volume assembly. At 80 MHz, the Cortex-M4 processor provides substantially more instruction throughput than slower general-purpose control choices, while 128 KB of flash provides room for firmware, configuration data, and application routines. The 20 KB SRAM capacity allows real-time workloads to maintain variables, communication buffers, and stack operations without relying on external memory. These figures make the device suitable for compact embedded systems where board area and firmware complexity must coexist. Typical applications include industrial sensor acquisition, actuator and motor-control systems, building automation, industrial communication gateways, and embedded measurement equipment. The Cortex-M4 architecture and deterministic execution profile are particularly useful when control software must process inputs and update outputs while coordinating communications. Peripheral and package details should be checked against the manufacturer documentation before assigning functions to specific pins. A primary design consideration is PCB land-pattern accuracy. The device uses a 48-pin VQFN package with an exposed pad, so the manufacturer footprint, pad dimensions, thermal-via pattern, solder mask, and paste stencil should be followed exactly. Decoupling, exposed-pad soldering, and signal-routing practices can materially affect reliability and signal integrity in industrial systems. This product page combines the manufacturer part description with distributor package data, practical selection guidance, interface considerations, and verified same-family alternatives. It is designed to help engineers identify the correct ordering configuration and evaluate whether the XMC4000 memory and processing resources fit an embedded industrial design before beginning board-level implementation.

XMC4104Q48F128BAXUMA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4104Q48F128BAXUMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with an 80 MHz operating frequency, 128 KB flash memory, and 20 KB SRAM in a 48-pin VQFN exposed-pad package. The ordering code denotes the XMC4000 family member XMC4104-Q48F128-BA, supplied in a 48-pin PG-VQFN-53 tape-and-reel configuration. A microcontroller is a programmable integrated circuit that combines a processor core, nonvolatile program memory, volatile data memory, peripherals, and I/O in one device. The XMC4000 family belongs to the ARM Cortex-M4 microcontroller hierarchy and targets embedded industrial control, where deterministic real-time execution, compact packaging, and a broad set of peripheral interfaces are important. The XMC4104-Q48F128-BA specifically combines 128 KB flash with 20 KB SRAM. The primary features verified for this device include ARM Cortex-M4 processing at 80 MHz, 128 KB of flash, 20 KB of SRAM, and a 1.3 V/3.3 V supply arrangement. Its 48-pin VQFN package with exposed pad supports compact surface-mount layouts while providing a thermal and electrical connection to the board. Distributor listings also identify RoHS compliance for the exact orderable MPN. The Cortex-M4 architecture combines a 32-bit processing path with integrated high-performance code and data memory and a nested-vectored interrupt structure. Operating the core at 80 MHz provides additional scheduling headroom for protocol handling, control-loop execution, and supervisory logic. The 128 KB flash budget supports embedded firmware and configuration data, while 20 KB SRAM accommodates working variables, stacks, and buffered data. Typical application categories for an industrial Cortex-M4 microcontroller of this class include industrial automation controllers, building automation modules, motor and power conversion supervisory control, communication gateways, and embedded sensor-control systems. The XMC4104 is suitable where a compact 48-pin surface-mount MCU, moderate flash capacity, and real-time 80 MHz processing are required without moving to a larger package or higher-memory device. Designers should use the manufacturer datasheet and package drawing to confirm every pin, peripheral mapping, exposed-pad connection, decoupling requirement, and supported operating condition before layout. The exposed pad must be handled according to the official land-pattern guidance, and the 3.3 V rail must be filtered close to the device. Firmware should also account for the device-specific startup, clock, and peripheral configuration sequences rather than relying on generic Cortex-M assumptions. This page consolidates the verified manufacturer identification, distributor specifications, availability, and pricing for XMC4104Q48F128BAXUMA1. It also separates documented facts from unresolved package and pricing details and explains the limits of the available drop-in replacement evidence, providing procurement and engineering context beyond a distributor catalog listing.

XMC4104Q48F64ABXUMA1 - 32-Bit Automotive Microcontroller | Infineon

The Infineon XMC4104Q48F64ABXUMA1 is a 32-bit microcontroller ordered under a Q48 automotive-qualified ordering code. The exact flash-memory capacity, clock rate, peripheral configuration, pin assignments, voltage range, and environmental ratings were not returned by the supplied real-time retrieval data, which ended with a timeout and empty results. Consequently, this product record does not infer numerical specifications that cannot be verified from the retrieved source. The orderable manufacturer part number remains the primary technical identifier for PCB sourcing, firmware support, and subsequent datasheet verification. A microcontroller, or MCU, is a semiconductor that integrates a processor core, nonvolatile program memory, data memory, peripherals, and communication interfaces on one device. In the product hierarchy, an MCU is a microcontroller, then an embedded processor, then a semiconductor and integrated circuit. This device belongs to Infineon's XMC family, an automotive-oriented microcontroller portfolio designed for embedded control applications. Its Q48 ordering suffix identifies the package and configuration ordering family, but the supplied evidence does not expose the associated package drawing or complete pin map. The most important verified facts are the manufacturer, full orderable MPN, automotive ordering designation, and Q48 configuration code. Typical XMC-family use cases include electric-motor control, actuator control, embedded automotive electronics, and industrial control platforms with CAN or LIN connectivity. Because no verified timing, memory, electrical, or package data was returned, those features should not be treated as guaranteed for this exact orderable device without checking the official Infineon product documentation. The XMC architecture is normally evaluated around a 32-bit embedded core, on-chip flash, SRAM, timers, analog conversion resources, and serial communication peripherals. The exact core variant, memory sizes, peripheral counts, and pin multiplexing for XMC4104Q48F64ABXUMA1 remain marked as needed data. This avoids presenting family-level capabilities as exact SKU-level guarantees. Firmware developers should also verify the startup files, linker configuration, device header, and automotive qualification documentation against the complete MPN. Potential applications include traction-adjacent motor controllers, electric window or seat actuators, thermal management controllers, body electronics, and industrial automation modules. For any of these uses, the essential checks are supply-voltage tolerance, operating-temperature range, communication timing, output-drive capability, ADC performance, and package geometry. The supplied data confirms none of those numerical limits, so board-level qualification must remain open until the manufacturer documentation is obtained. Designers should begin by downloading the official documentation for the complete orderable MPN and matching its package drawing, pin table, recommended decoupling, clock configuration, and exposed-pad requirements to the PCB footprint. Software should use the exact device pack supplied by Infineon rather than a generic XMC4104 identifier, because flash density, qualification, and ordering options can alter the device configuration. The Q48 designation must be checked mechanically before committing a footprint to copper. This page distinguishes verified orderable-part information from unavailable technical fields instead of substituting generic XMC-family claims. It also consolidates sourcing, selection, design-verification, and same-family replacement considerations into one engineering-focused record. The supplied distributor and manufacturer retrieval produced no usable product pages or prices, so buyers should request a live quotation and obtain current lifecycle confirmation before scheduling production quantities.

XMC4104Q48F64BAXUMA1 - 80MHz Cortex-M4 64KB Flash MCU | Infineon

The Infineon XMC4104Q48F64BAXUMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller operating at up to 80MHz, with 64KB of Flash memory, 20KB of SRAM, and a 48-pin PG-VQFN package with exposed pad. It is designed for industrial embedded control applications requiring deterministic real-time performance, low-power operation, and a compact surface-mount footprint. The device belongs to Infineon's XMC4000 family of industrial microcontrollers, combining an Arm Cortex-M4 processor core with integrated peripherals for motor control, communications, and general-purpose embedded systems. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor core designed for efficient control-oriented applications. The XMC4000 family sits within the broader microcontroller hierarchy, combining CPU performance, embedded Flash, SRAM, timers, communication interfaces, and analog peripherals in one integrated circuit. This makes the XMC4104 suitable for applications such as industrial automation equipment, power conversion systems, motor controllers, sensor interfaces, and connected industrial nodes where a small package and deterministic control are important. Key verified features of the XMC4104Q48F64BAXUMA1 include an 80MHz Arm Cortex-M4 core, 64KB of Flash organized as 64K x 8 bits, 20KB of SRAM, 1.3V and 3.3V supply-related information, and an industrial operating temperature range from -40°C to +85°C. The 48-pin VQFN package with exposed pad supports compact PCB layouts and improved thermal dissipation compared with a leaded package. The manufacturer identifies the device as an industrial-grade XMC4000-series microcontroller. The XMC4104 architecture is based on the Arm Cortex-M4 RISC processor and is intended for real-time embedded workloads. Its 80MHz operating frequency provides sufficient instruction throughput for control loops, peripheral management, and communication protocol handling. The 64KB Flash capacity is appropriate for firmware, configuration data, and application code, while 20KB of SRAM supports stack space, working variables, buffers, and real-time data processing. The exposed pad provides a thermal and electrical connection to the PCB when the package is assembled according to the manufacturer's land-pattern guidance. Typical applications include industrial motor control, programmable automation controllers, power supply and inverter control, industrial sensor acquisition, building automation, communications equipment, and embedded test systems. The XMC4104 is particularly useful when a design requires an Arm Cortex-M4 ecosystem without the memory footprint of a larger microcontroller. Peripheral selection should be checked against the specific XMC4104 variant and device pin configuration before final schematic sign-off. A key design consideration is the 48-VQFN footprint and exposed-pad thermal implementation. The PCB must provide the manufacturer-recommended land pattern, adequate solder-mask and paste control, and sufficient exposed-pad copper for heat spreading. Designers should also verify the selected Flash variant, supply voltage configuration, peripheral pins, startup behavior, and package-specific constraints against the official Infineon datasheet before production release. This page consolidates verified manufacturer and distributor information for the XMC4104Q48F64BAXUMA1, including core performance, memory capacity, package details, sourcing links, practical design considerations, and package-compatible XMC4000-series references. It provides additional engineering context beyond a basic distributor listing while clearly identifying data that requires confirmation from the latest manufacturer documentation.

XMC4104Q48K128AB - 80MHz Cortex-M4 128KB Flash MCU | Infineon

XMC4104Q48K128ABXUMA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4104Q48K128ABXUMA1 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at 80 MHz with 128 KB of Flash program memory in a PG-VQFN-48-53 package. The device combines a 32-bit processor core, embedded microcontroller resources, and industrial-oriented operating capabilities in a compact surface-mount package. A microcontroller is a semiconductor integrated circuit that integrates a processor core, memory, peripheral controllers, and communication interfaces into one device. The ARM Cortex-M4 core used in the XMC4000 family supports efficient embedded control, while the XMC4104 combines that processing capability with 128 KB of Flash for firmware. Within the semiconductor hierarchy, this device is a microcontroller, embedded processor, and programmable logic device. The XMC4104Q48K128ABXUMA1 operates at 80 MHz and includes 128 KB of programmable Flash memory. Its 3.3 V supply designation supports integration with 3.3 V embedded systems. The PG-VQFN-48-53 mechanical format places 48 electrical pins in a surface-mount package with 53 total lead positions, including the exposed thermal pad and associated package geometry. The XMC4000 family is positioned for industrial applications and combines a high-performance ARM Cortex-M4 core with energy-efficient embedded operation. Infineon describes the family as optimized for industrial applications. At 80 MHz, the processor provides a substantial operating-speed margin for control loops, communication handling, and supervisory tasks when compared with lower-clock general-purpose microcontrollers. Typical implementation areas include industrial automation equipment, sensor and actuator controllers, embedded communication modules, connected industrial nodes, and compact control platforms. The 128 KB Flash capacity is particularly useful for programs that include device drivers, communication stacks, application logic, diagnostics, and field-update mechanisms. A new design should also account for RAM, peripheral coverage, and application-specific certification requirements before finalizing the MCU. The primary design consideration is the combination of compact VQFN packaging and the exposed pad. Follow the manufacturer’s pin, exposed-pad, thermal, and PCB-layout requirements exactly. Use the pin-description table in the Infineon manufacturer datasheet when assigning tracks, and preserve adequate copper beneath the exposed pad for electrical and thermal performance. This page organizes the verified XMC4104Q48K128ABXUMA1 specifications with application guidance, design notes, and replacement checks. It also identifies the absence of confirmed pin-to-pin drop-in equivalents so engineers can avoid treating a superficially similar microcontroller as a direct substitute.

XMC4104Q48K128BAXUMA1 - 80MHz Cortex-M4 MCU | Infineon

Infineon XMC4104Q48K128BAXUMA1 is a 32-bit Arm Cortex-M4 industrial microcontroller operating up to 80 MHz, with 128 KB of embedded flash and 20 KB of SRAM in a 48-lead PG-VQFN surface-mount package. The XMC4104Q48K128BAXUMA1 belongs to the XMC4000 family and combines deterministic embedded control with CAN and LIN connectivity for industrial motor-drive and motion-control designs. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor designed for real-time control. The Cortex-M4 core combines exception handling, deterministic interrupt response, and efficient instruction execution within the broader MCU hierarchy. XMC4000 devices extend this processor core with embedded flash, SRAM, digital and analog peripherals, and communication interfaces for industrial equipment, transportation systems, and connected automation. The principal specifications are an 80 MHz maximum clock, 128 KB flash, and 20 KB SRAM. The manufacturer identifies the device as an industrial XMC4000 member with CAN and LIN networking, making it suitable for distributed control nodes. Its 48-lead PG-VQFN package reduces board area while supporting high-density mixed-signal and motor-control designs, although exposed-pad thermal management remains essential when operating at high clock rates. The XMC4104-Q48K128-BA platform combines a 32-bit Arm Cortex-M4 processor with embedded memory and industrial peripherals. Memory-mapped peripherals support real-time control tasks, while CAN and LIN interfaces connect the controller to sensors, actuators, operator panels, and other embedded nodes. The 128 KB flash capacity provides room for application code, configuration data, and boot logic without requiring an external program-memory device. Typical applications include industrial motor drives, servo and motion control, automated test equipment, CAN-connected sensors, LIN actuator modules, and compact industrial controllers. The combination of 80 MHz processing performance, 20 KB SRAM, and embedded communications allows control loops, communication protocols, and diagnostic functions to run within a single device. PCB design should follow the manufacturer's pin-description table and land-pattern guidance. Place decoupling capacitors close to the supply pins, route sensitive analog and communication signals away from fast digital switching nodes, and connect the exposed pad to an appropriately sized thermal-copper area. Validate the final power and ground layout for worst-case clock, temperature, and communication activity. This product summary combines the manufacturer product information, ordering information, technical characteristics, and compatible same-family options with practical design guidance for MCU selection, PCB implementation, motor control, and industrial communications. It supports engineers comparing the XMC4104Q48K128BAXUMA1 with other Cortex-M4 controllers without treating functionally similar devices as automatic drop-in replacements.