Products (1)

SN74LS245M - 3-State Octal Bus Transceiver | Texas Instruments
SN74LS245M

SN74LS245M - 3-State Octal Bus Transceiver | Texas Instruments

Texas Instruments SN74LS245M is an octal bus transceiver with 3-state outputs, eight data lines per direction, and a 20-pin dual in-line package. It is designed for asynchronous, two-way communication between data buses, with separate direction and enable controls for bus isolation and drive management. The SN74LS245M belongs to the SNx4LS245 family of octal bus transceivers. An octal bus transceiver is a bidirectional logic interface that connects two buses through eight parallel data lines. It can transmit data from bus A to bus B or from bus B to bus A, depending on the direction-control input. The 3-state outputs place each data line into a high-impedance state when the device is disabled, allowing multiple bus drivers to share the same physical bus without creating active drive conflicts. Key features include eight 3-state data channels, bidirectional bus operation, a dedicated enable input for bus isolation, and a direction input for selecting the transmission path. The manufacturer identifies the family for asynchronous two-way bus communication, while its control-function implementation reduces external timing requirements. The 20-pin package provides a conventional through-hole footprint suitable for legacy computer, industrial-control, instrumentation, and embedded-system boards. The SN74LS245 architecture separates the A-side and B-side data paths while using common direction and enable controls for all eight channels. When enable is asserted, the direction input determines which bus actively drives the data lines. When enable is deasserted, the output drivers enter the high-impedance state. This arrangement supports controlled bus sharing, CPU-to-peripheral data paths, bidirectional peripheral interfaces, and temporary isolation of a bus segment during system configuration or test. Typical applications include bidirectional data-bus buffering in computer systems, programmable peripheral interfaces, memory-bus isolation, test and measurement equipment, and industrial control systems. In each case, the transceiver can reduce contention by disabling one bus segment when another driver must control the shared line. The device is particularly useful in designs that retain 5 V TTL-style logic and require eight parallel lines rather than a serial transceiver. When laying out a board, place the SN74LS245M close to the connector or bus driver it isolates, route each data line as a short matched trace, and keep ground return paths continuous. Confirm the DIR and enable levels during reset so that no two enabled drivers contend on the same bus. Follow the manufacturer datasheet pin description table when assigning tracks because the package pin arrangement alternates A-side and B-side data signals. This page consolidates the device function, bus-control behavior, package details, verified sourcing links, practical application guidance, and qualified same-footprint alternatives into an engineering reference for legacy TTL and LS-series designs.

RFQ Contact