New Products · کورتەی دابینکردن

UC San Diego's 3D-Printed Air-Powered Robot Reaches 10.6 mph

A six-legged soft robot combines single-process 3D printing with pneumatic control to reach 10.6 mph, but air consumption and three-to-four-hour durability limit field use.

بڵاوکراوەتەوە نوێکراوەتەوە 4 خولەک خوێندنەوە ✓ ئامادەی AI ھاوبەشکردن

بە کورتی — سێ ڕستە

  • UC San Diego's six-legged soft robot reached 10.6 mph using compressed air and no electronic controller. (S1)
  • The robot was printed as one TPE structure, eliminating the reported assembly step. (S1)
  • The system delivered an estimated 169 watts and carried a 257-gram payload in testing. (S1)

وەرگیراوە لە key_takeaways (خانەی ڕاستەقینە، زۆرترین 3 تۆمار). ڕاستی و شیکاری بە جیا نیشانە کراون.

UC San Diego's 3D-Printed Air-Powered Robot Reaches 10.6 mph — New Products news briefEditorial cover for a New Products brief. Power motif; headline "UC San Diego's 3D-Printed Air-Powered Robot Reaches 10.6 mph". No reported key numbers on this brief, so no number strip is drawn. 1 cited source. Static cover (no animation).NEW PRODUCTS · NEWS BRIEFUC San Diego's 3D-Printed Air-PoweredRobot Reaches 10.6 mphXAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

لە وەڵامێکی AIەوە هاتوویت — ئەمە ئەسڵی پشتڕاستکراوەیە

لەوانەیە پوختەیەکی AI بنەمای داواکارییەکانی لەدەستدابێت. پێشبینییە ڕەسەنەکە، بەشەکانی تووشبوو و هەموو ئاماژەکان لەم پەڕەیەدان، هەریەکەیان بەرەو سەرچاوەکەی دەگەڕێتەوە.

پێشبینی XAIPART

ئەم کورتەیە پێشبینییەکی هەڵوەشێنراوەی تێدایە.

بەشەکانی تووشبوو

ھیچ گونجانێک لە کاتالۆگدا بۆ ئەم چیرۆکە نییە — ھیچ پیشان نادرێت لە جیاتی دەرھێنانی گونجان.

Reported by Hackster.io News on . Summarized and analyzed by XAIPART Editorial.

What happened

Researchers at the University of California San Diego developed a six-legged soft robot that reached 10.6 mph and can be produced in one 3D-printing process.S1 The robot uses compressed air instead of electric motors and electronic controllers, with its body, legs, actuators and pneumatic control system integrated into one flexible structure.S1

The researchers used thermoplastic elastomer, or TPE, filament on a modified desktop fused-filament-fabrication printer to create continuous extrusion paths and airtight internal air channels.S1 After printing, the robot needs no mechanical assembly; the researchers initialize its pneumatic mechanism with pliers and connect an external air supply.S1 Its pneumatic oscillator produces four alternating pressure signals, while lifting and swinging actuators coordinate an alternating tripod gait in which three legs support the body as the other three move forward.S1

Testing recorded a maximum speed of 10.6 mph, equivalent to about 20 body lengths per second, and an estimated 169 watts of mechanical power delivered to the legs.S1 The robot carried a 257-gram payload and traversed gravel, grass, mulch, soil and the surface of water.S1 Most trials required a hose connected to an external compressor because compressed-air consumption was high; an onboard CO2 canister produced untethered movement for only a few seconds, while test robots failed after roughly three to four hours of continuous operation.S1

MetricReported valueSource
Maximum speed10.6 mphS1
Speed in body lengthsAbout 20 body lengths per secondS1
Mechanical powerEstimated 169 wattsS1
Payload257 gramsS1
Continuous-operation lifeRoughly 3 to 4 hoursS1

Background timeline

  1. - Hackster.io News reported the UC San Diego robot and its Science Robotics paper.S1

Supply-chain ripple

  1. The six-legged robot reached 10.6 mph and was fabricated as one TPE structure without assembly.S1 S1
  2. Single-process fabrication can reduce assembly labor, but airtight pneumatic channels and a specialized printer path constrain the production process.XAIPART analysis
  3. The oscillator's two-stage expansion can extract more mechanical work from each compressed-air charge than a single-stage exhaust.XAIPART analysis
  4. External compressors, air hoses and a roughly 3-to-4-hour operating life remain the practical constraints for buyers seeking untethered robots.XAIPART analysis

XAIPART take

Technical impact

XAIPART analysis: The 10.6 mph result shows that compliant locomotion and speed are not mutually exclusive in this design.S1 The immediate engineering trade-off is between the oscillator's useful 169 watts of mechanical output and the compressed-air consumption that keeps the robot tethered.S1

XAIPART analysis: One-piece printing removes assembly steps, but the modified desktop FFF process and continuous extrusion paths will require dedicated tooling and process controls before a buyer can treat the robot as a repeatable manufacturing product.S1

Market impact

XAIPART analysis: The platform is closer to a laboratory demonstration than a deployable supply for procurement teams because the onboard CO2 test lasted only a few seconds and the robot normally depends on a hose and external compressor.S1 The failure point after roughly three to four hours also leaves the service interval undefined for extended inspections.S1

Action

XAIPART analysis: Engineering teams evaluating this architecture should request airflow, pressure and duty-cycle data before committing to a mobile platform; the source did not disclose those operating values.S1 If a follow-up build still cannot operate untethered beyond 60 seconds within 12 months, qualify an electrically controlled alternative for the same payload and terrain tests.S1

XAIPART Forecast

XAIPART analysis: XAIPART expects the UC San Diego soft robot's next documented field trial to exceed 5 minutes of continuous untethered operation within 6 months; a result below 5 minutes would indicate that compressor dependence and durability still limit deployment. XAIPART analysis

Facts are as reported by the cited sources. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the sources' claims. Operating pressure, airflow and failure-rate data are not disclosed, and the performance record remains single-source and unverified outside the cited report.S1

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

جێگرەوەکان و چرخەی ژیان

جێگرەوە تۆمارکراوەکان — مەودای کاتالۆگ، نەک ڕیزبەندی بازاڕ
بەشپەیوەندیخولگەی ژیانبنەما
— ھیچ بەدیلێک لە تۆماردا نییە پێویستی بە داتا ھەیە — پێویستی پێیەتی match_type پێش ئەوەی هیچ نیشانەیەکی پێشوو دەربکەوێت

نیشانەکانی «پێشوو» و «بەدیل» تەنھا لە جۆرێکی گونجانی تۆمارکراو، دۆخی چرخەی ژیان، یان دەقی سەرچاوەوە دێن. لەو شوێنەی ھیچ گونجانێک تۆمار نەکراوە، ھیچ نیشانەیەک پیشان نادرێت. لیستەکانی خۆمان ئاماژەیەکی بازاڕ نین.

بەشەکانی تووشبوو

ھیچ گونجانێک لە کاتالۆگدا نییە. ئەم هەواڵە بۆ هیچ پارچەیەک کە ئێستا لە XAIPART لیستکراوە ناگونجێت. ئێمە هاوتایی نادۆزینەوە، و لیستێکی شوێنگرەوە نیشان نادەین.

فشاری تێچوو بەپێی ڕەهەند

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z 0.0276, neutral; Fx Energy z -0.0087, neutral. Composite index 0.1, band neutral.0Input costno readingSupply/demandz +0.0276 · neutral48 dFX & energyz −0.0087 · neutral5 dcomposite +0.1 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
Input costPCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt52 d
Supply/demandPCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)48 d
FX & energyDEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu5 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

ئەمە چۆن بەرهەم هێنرا

بەڵگەی پرۆسە — ھێنان، ڕاستی سەرچاوە، مۆدێل و دەروازە
شوێنپێی پشکنین بۆ ئەم کورتەنامەیە
Source fetched Hackster.io News · www.hackster.io · 3,217 chars · fetch status success
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3.1-Flash · prompt Blog Agent - News Summary (v3.0.2-news) · 10,321 tokens · 11.8s · run completed
Gate verdict pass · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.024872 · C10 rounds 0
Time contract 2 <time datetime> values in this brief — 0 violations (+08:00 or date-only)

هەر ڕیزێکی سەرەوە لەلایەن پرۆسێسەکەوە بەرهەم دەهێنرێت، نەک بە دەست نووسرابێت.

نمرەی سەروەرێتی

ئەنجامی دەروازەی دیاریکراو — PHP ی خاوێن، هیچ مۆدێلێک لە بڕیاردانەکەدا بەشدار نییە
شیکردنەوەی نمرەی دەروازە 6 پشکنینەکانی جێبەجێکراو، 6دەرپەڕیوە: 100 لەسەد. No hold items or mandatory failures. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.8559. پشکنینەکانی جێبەجێکراو تێپەڕێنراون 6 / 6 = 100% · بڕیار: pass No hold items or mandatory failures Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.8559 دەروازەکە بڕیار لە بڵاوکردنەوە دەدات. نمرەی وردبینی سەربەخۆ تەنها ڕاوێژییە.
هەڵەیەکت دۆزیوەتەوە؟ پێمان بڵێ چی هەڵەیە — ڕاستکردنەوەکان لەگەڵ دەقی ڕەسەن بڵاودەکرێنەوە و تۆمار دەکرێن. بە نهێنی وتارەکان دەستکاری ناکەین.

بۆچوونەکان

یەکەم کەس بە بۆچوون بنووسە.

سەرچاوەکان

  1. A Speedy Soft Robot Powered by Air — https://www.hackster.io/news/a-speedy-soft-robot-powered-by-air-8f486942529c · rss · سەردانکراوە

ڕاستییەکان بە S1/S2 نیشان دەدرێن و بۆ سەرچاوەی بەستەردراو دەگەڕێنەوە. ئەو دەقانەی نیشانکراون شیکاری بیرکردنەوەی خۆی XAIPARTن، جیاکراوە لە ڕاستییەکانی ڕاپۆرتکراو. بەستەرەکانی سەرچاوە شوێن دەکرێن نەک nofollow — دانانی سەرچاوە بە مەبەستە.