ADC/DAC
بەرهەمەکان (3,600+)
WM8718SEDS/V - 24-Bit Stereo Audio DAC | Cirrus Logic
Cirrus Logic WM8718SEDS/V is a 24-bit differential stereo digital-to-analog converter with volume control, supporting audio processing up to 192 kHz and digital audio through an I2S interface. The device is supplied in a 20-SSOP package for surface-mount assembly. Its combination of differential outputs, integrated digital volume control, and high-resolution conversion makes it suitable for professional audio, consumer audio, communications equipment, and multimedia playback systems. A DAC is a digital-to-analog converter, a signal-conversion integrated circuit that transforms sampled digital audio into an analog voltage suitable for amplification and loudspeaker output. Within the broader semiconductor hierarchy, the WM8718SEDS/V belongs to the ADC/DAC class of data-conversion ICs and ultimately to the integrated-circuit category. It provides the output-side conversion function in a digital audio signal chain, typically following a source, codec, decoder, or digital audio processor. The manufacturer datasheet identifies the WM8718SEDS/V as a 24-bit DAC operating to 192 kHz with digital signal processing, I2S connectivity, differential stereo outputs, and volume control. These features distinguish it from basic fixed-output DACs: differential output architecture supports balanced audio routing, while integrated volume control allows output-level adjustment without relying exclusively on a separate analog attenuator. The I2S interface also provides a conventional connection to digital audio processors and application processors. The 20-SSOP package supports compact, surface-mount PCB construction while exposing the required digital, analog, clock, and power connections. Because the converter handles both digital and analog signals, board implementation requires careful partitioning. The digital interface and clock signals should remain separated from the differential analog outputs, with the manufacturer’s recommended application circuit and pin description used as the basis for component placement and trace routing. Typical uses include multichannel consumer-audio receivers, powered speakers, sound-bar signal paths, digital mixing consoles, portable listening equipment, and embedded audio systems that require a compact stereo DAC. The 192 kHz capability is useful when the source material and upstream signal path support that rate, although operating at the maximum rate generally requires correspondingly clean clocking, layout, and power delivery. Designers should verify the required master clock, I2S word length, sample-rate configuration, output load, and external filtering against the manufacturer datasheet before layout release. Differential routing should be treated as a matched pair, and the analog return path should connect cleanly to the device ground reference. These controls help preserve channel balance and reduce distortion introduced by the PCB rather than by the converter itself. This product page combines the exact manufacturer and distributor identifiers, organizes the documented conversion and interface capabilities, and adds application, comparison, replacement, and layout guidance. It is intended to help engineers narrow a DAC choice by resolution, sample rate, interface, package, output architecture, and assembly requirements before completing a production BOM.
WM8725CGED - 24-Bit Stereo Audio DAC | Cirrus Logic
The Cirrus Logic WM8725CGED is a 24-bit stereo audio digital-to-analog converter with a 96 kHz sampling rate, selectable normal or I2S-compatible serial input, and a 14-pin SOIC package. According to the verified distributor listing, it is designed as a special-purpose audio DAC and provides an excellent 99 dB signal-to-noise performance. The WM8725 belongs to the audio DAC hierarchy: digital-to-analog converter, audio converter, data-acquisition and signal-conversion integrated circuit. Its function is to convert digital audio samples into left and right analog output signals while preserving low-noise performance for portable audio equipment, video CD players, and related consumer audio systems. The selectable serial interface supports 16-bit to 24-bit digital input formats, while integrated digital filtering helps shape the conversion output. Key verified features include stereo DAC operation, 24-bit resolution, 96 kHz operation, normal or I2S-compatible serial data interfaces, and 99 dB signal-to-noise performance. The 14-SOIC package is appropriate for conventional surface-mount PCB assembly. Exact supply-voltage limits, analog output specifications, clock requirements, filter characteristics, and electrical operating limits were not included in the supplied source text and are therefore not inferred here. The device architecture combines a digital input interface, digital filtering, and sigma-delta DAC stages. This arrangement is suitable when a system accepts digital audio from a decoder, portable player, or digital audio processor and requires analog stereo outputs. The 99 dB SNR figure provides a concrete selection criterion when comparing audio-conversion stages, although system-level noise also depends on the supply, clock, analog output network, grounding, and downstream amplifier. Typical applications include portable audio equipment, video CD players, digital audio adapters, compact stereo systems, and embedded audio products. In each case, the important design question is whether the required input word length, sample rate, interface mode, supply arrangement, and analog output topology match the device and its application circuit. A key design consideration is to preserve clean analog and digital grounding while keeping the digital interface and clock signals away from sensitive analog output paths. Decoupling and output filtering should follow the manufacturer application guidance once the complete electrical data is available. This page synthesizes the verified distributor specifications, source links, and engineering context rather than adding unverified datasheet values. The verified distributor records identify Cirrus Logic as the current source brand and describe WM8725CGED as a 24-bit, 96 kHz, stereo, 14-SOIC audio DAC. LCSC also reports the part as in stock with a listed price of $1.0043, while current quantity pricing beyond that single source is not provided.
WM8725CGED/R - 24-Bit Stereo Audio DAC | Cirrus Logic (Tape & Reel)
The Cirrus Logic WM8725CGED/R is a 24-bit stereo audio digital-to-analog converter with a 96 kHz sampling rate, selectable normal or I2S-compatible serial input, and a 14-pin SOIC package. According to the verified distributor listing, it is designed as a special-purpose audio DAC and provides an excellent 99 dB signal-to-noise performance. The WM8725 belongs to the audio DAC hierarchy: digital-to-analog converter, audio converter, data-acquisition and signal-conversion integrated circuit. Its function is to convert digital audio samples into left and right analog output signals while preserving low-noise performance for portable audio equipment, video CD players, and related consumer audio systems. The selectable serial interface supports 16-bit to 24-bit digital input formats, while integrated digital filtering helps shape the conversion output. Key verified features include stereo DAC operation, 24-bit resolution, 96 kHz operation, normal or I2S-compatible serial data interfaces, and 99 dB signal-to-noise performance. The 14-SOIC package is appropriate for conventional surface-mount PCB assembly. Exact supply-voltage limits, analog output specifications, clock requirements, filter characteristics, and electrical operating limits were not included in the supplied source text and are therefore not inferred here. The device architecture combines a digital input interface, digital filtering, and sigma-delta DAC stages. This arrangement is suitable when a system accepts digital audio from a decoder, portable player, or digital audio processor and requires analog stereo outputs. The 99 dB SNR figure provides a concrete selection criterion when comparing audio-conversion stages, although system-level noise also depends on the supply, clock, analog output network, grounding, and downstream amplifier. Typical applications include portable audio equipment, video CD players, digital audio adapters, compact stereo systems, and embedded audio products. In each case, the important design question is whether the required input word length, sample rate, interface mode, supply arrangement, and analog output topology match the device and its application circuit. A key design consideration is to preserve clean analog and digital grounding while keeping the digital interface and clock signals away from sensitive analog output paths. Decoupling and output filtering should follow the manufacturer application guidance once the complete electrical data is available. This page synthesizes the verified distributor specifications, source links, and engineering context rather than adding unverified datasheet values. The verified distributor records identify Cirrus Logic as the current source brand and describe WM8725CGED/R as a 24-bit, 96 kHz, stereo, 14-SOIC audio DAC. LCSC also reports the part as in stock with a listed price of $1.0043, while current quantity pricing beyond that single source is not provided.
WM8726CGED - 24-Bit 192 kHz Stereo DAC | Cirrus Logic
Cirrus Logic WM8726CGED is a 24-bit, 192 kHz stereo digital-to-analog converter (DAC) with a 14-lead SOIC package and a 3.0 V to 5.5 V supply range. It accepts I2S, 16-bit right-justified, and DSP audio data through a pin-selectable interface, making it suitable for consumer audio equipment, digital televisions, home-theater systems, DVD players, set-top boxes, and automotive audio systems. A stereo DAC is an audio data-converter IC that transforms digital PCM samples into left- and right-channel analog voltage signals. It belongs to the ADC/DAC hierarchy within integrated circuits and ultimately falls under semiconductor signal-conversion and audio-processing devices. In an audio signal chain, the WM8726CGED typically follows a digital audio processor and precedes an analog output amplifier, volume-control stage, or speaker-driving circuit. The verified 24-bit resolution supports high-fidelity digital audio reproduction, while operation up to 192 kHz accommodates high-sample-rate source material. The pin-selectable interface provides compatibility with I2S, 16-bit right-justified, and DSP formatting, reducing host-format adaptation requirements. Its 3.0 V to 5.5 V supply operation supports both common low-voltage digital and mixed analog-supply system architectures. The WM8726CGED provides separate left- and right-channel outputs, digital audio inputs, clock inputs, mute control, and digital control signaling. Its architecture is intended for stereo playback systems where a conventional audio DAC is required without the complexity of a general-purpose conversion subsystem. The package also reflects its role as a compact, surface-mount audio converter for volume-production consumer and automotive electronics. Typical applications include DVD players, home-theater systems, digital televisions, set-top boxes, and automotive audio equipment. In these systems, the device can accept digital audio from a decoder or processor, generate left and right analog outputs, and provide digital mute control. System-level performance still depends on the external clock scheme, output filtering, power-supply implementation, analog gain stage, and speaker or headphone amplifier. Designers should follow the manufacturer’s recommended application circuit, interface timing, decoupling, and output-filtering guidance. Clock routing requires particular care because audio data must be synchronized with the appropriate bit clock and left/right channel signal. Adequate analog and digital supply decoupling helps isolate the converter from switching noise and prevents unintended coupling into the analog output path. This page consolidates verified distributor identification, package and interface facts, supply information, a pin-compatible WM8725 option, application guidance, and engineering-oriented selection notes. It distinguishes documented replaceability from broader functional similarities so designers can avoid treating devices with the same general specifications as guaranteed drop-in replacements.
WM8727CGED/R - 24-Bit 192kHz Stereo DAC | Cirrus Logic
The Cirrus Logic WM8727CGED/R is a 24-bit stereo digital-to-analog converter (DAC) designed for audio systems that require 192 kHz sampling capability and an I2S digital audio interface. The device is offered in an 8-pin SOIC package, making it suitable for compact consumer, communications, and multimedia audio designs. A digital-to-analog converter is an integrated circuit that converts digital audio samples into proportional analog voltage signals that can drive amplifiers, speakers, or line-level output stages. In the broader component hierarchy, the WM8727CGED/R is an audio DAC, within the ADC/DAC class of integrated circuits and the wider signal-conversion and signal-processing semiconductor category. The key headline specifications are 24-bit resolution, a maximum sampling rate of 192 kHz, stereo operation, an I2S serial audio interface, and an 8-pin SOIC package. These attributes position the converter for applications in which digital audio source quality must be preserved through the DAC stage. The 192 kHz capability supports high-resolution audio streams, while the stereo architecture provides two independent analog output channels for conventional left-right playback systems. The WM8727CGED/R belongs to the Wolfson Microelectronics audio-converter product family, which Cirrus Logic has represented through its audio IC portfolio. It is intended for applications where a digital audio stream must be converted into an analog output suitable for downstream amplification. Its I2S interface allows connection to digital audio processors, USB interface controllers, application processors, and digital audio transports. Typical uses include hi-fi audio equipment, digital audio decoding modules, multimedia consoles, audio interfaces, soundbars, set-top boxes, and portable or networked audio products. In these systems, the converter can accept 24-bit digital samples and provide the analog stereo signal required by a headphone or line-output amplifier stage. Board-level design should include correct analog and digital grounding, short output routing, and the bypass capacitors required by the manufacturer datasheet. One important design consideration is that converter headline specifications do not determine the final system audio performance. Clock source quality, digital-audio layout, analog output filtering, power-supply noise, amplifier selection, and output impedance all influence the reproduced signal. Use the manufacturer pin-description table and application information to assign PCB nets and verify the supported clock and interface configurations. This page organizes the verified product identity, package information, interface description, and sourcing links for the WM8727CGED/R. It also provides engineering context for audio-converter selection, distinguishes the exact ordered part from related family members, and highlights where a drop-in substitution requires explicit pin and function verification before PCB release.
WM8728SEDS/V - 24-Bit Stereo DAC | Cirrus Logic
The Cirrus Logic WM8728SEDS/V is a 24-bit, 192 kHz stereo digital-to-analog converter with integrated volume control, I2S digital audio input, and a 20-pin SSOP package. It converts two digital audio channels into balanced or unbalanced analog outputs, making it suitable for audio equipment that requires high-resolution playback and a compact mixed-signal footprint. A stereo DAC is an audio interface that accepts digital PCM samples and reconstructs the corresponding left- and right-channel analog waveforms. In the product hierarchy, a DAC belongs to the ADC/DAC class of data-conversion integrated circuits and supports the broader audio-processing chain. The WM8728SEDS/V combines digital audio input, volume control, and analog output stages in one package, reducing the number of external components required in compact audio products. The converter supports 24-bit digital audio operation at sample rates up to 192 kHz. Its integrated volume control provides a convenient way to adjust playback gain without implementing a separate analog attenuation circuit. The I2S-compatible interface connects to digital audio processors, USB audio bridges, portable media systems, and home-audio equipment, while the 20-pin SSOP package supports conventional surface-mount assembly. System partitioning is especially important for this converter. Digital audio data enters through the serial interface, while the analog section reconstructs left- and right-channel signals at the converter output. Correct synchronization between the audio processor and the DAC is essential for preventing clicks, repeated samples, or channel misalignment. Power, ground, and analog-output routing must be arranged to minimize noise coupling into the reconstructed waveform. Typical uses include digital active speakers, compact stereo amplifiers, USB audio equipment, portable audio products, and embedded playback systems. The 192 kHz capability makes the device appropriate for high-resolution audio paths, while the integrated volume control simplifies signal-chain design. The same device can support headphone, line-level, or other analog stages when its output configuration and external network are matched to the intended load. The primary design trade-off is integration versus implementation flexibility. Integrated volume control reduces external circuitry and helps simplify control software, but an adjustable external analog amplifier may provide wider gain control or additional filtering. Before finalizing the layout, consult the manufacturer datasheet for the exact output-mode pins, recommended capacitors, supported clocking arrangements, and analog output configuration. This product summary consolidates the exact resolution, sample-rate, interface, channel, packaging, and volume-control characteristics into an engineering-focused selection guide. It also distinguishes the WM8728SEDS/V from the identified WM8728SEDS-RV option and provides design notes covering clocking, grounding, filtering, output loading, and thermal verification for dependable stereo audio implementation.
WM8737CLGEFL/R - 24-Bit Stereo ADC | Cirrus Logic | Audio
The Cirrus Logic WM8737CLGEFL/R is a low-power stereo audio analog-to-digital converter with 24-bit resolution, operation up to 96 kHz, an SPI interface, and a 32-pin QFN package measuring 5 x 5 mm. The device combines stereo ADC conversion and microphone preamplifier functionality for compact digital audio systems. An audio ADC is a signal-processing semiconductor that converts left- and right-channel analog voltages into digital sample data. It belongs to the ADC hierarchy within data-converter integrated circuits, where precision, bandwidth, noise performance, clocking, and interface efficiency determine suitability for recording, communication, and consumer audio equipment. The WM8737CLGEFL/R supports 24-bit conversion at rates up to 96 kHz and uses a serial peripheral interface for digital data transfer. Its analog and digital supply range of 1.42 V to 3.6 V supports low-voltage portable and embedded designs. The operating temperature range of -25°C to +85°C covers industrial-room conditions, while the surface-mount QFN-32 package supports compact PCB construction. The stereo ADC architecture is intended to capture two audio channels simultaneously, making the device suitable for microphone preamplification and stereo line-level digitization. A serial interface reduces the number of data connections compared with a parallel ADC and allows the converted audio stream to be transferred efficiently to a digital signal processor, audio controller, or system-on-chip. Typical uses include digital microphones, voice-capture equipment, audio recording modules, soundbars, speaker systems, and portable consumer electronics. Low-power operation is particularly useful in battery-powered products where every milliampere affects run time. The small 5 x 5 mm footprint also helps designers retain a compact board area while implementing two-channel conversion. PCB implementation requires careful separation of analog and digital return paths, placement of the exposed thermal pad, and a clean supply arrangement around the converter. Use the manufacturer datasheet for the complete pin-description table, recommended application circuit, exposed-pad layout, and supported interface timing before assigning tracks. This page combines the manufacturer-device identity, package information, commercial inquiry path, technical application guidance, and available cross-reference information to help engineers evaluate the WM8737CLGEFL/R for low-voltage stereo audio acquisition systems.
WM8738CGED - 24-Bit 96kHz Stereo ADC | Cirrus Logic
The Cirrus Logic WM8738CGED is a 24-bit stereo audio analog-to-digital converter supporting sampling rates up to 96 kHz and digital audio data transfer through I2S. It is supplied in a 14-pin SOIC package and is identified by distributor listings as a low-power stereo ADC device. The WM8738CGED is intended for audio capture, conversion, and signal-chain designs where a compact package, stereo conversion, and a 96 kHz maximum sampling rate are the principal selection criteria. An ADC, or analog-to-digital converter, is an integrated circuit that samples an analog audio voltage and converts it into a digital representation. A stereo ADC processes two audio channels, which allows left and right microphone, line, or other analog sources to be captured simultaneously. Digital audio words are then transferred to a processor, digital signal processor, or audio codec using a serial interface such as I2S. The WM8738CGED therefore occupies the boundary between the analog input stage and the digital audio processing stage. According to the verified DigiKey and Mouser product listings, the key device parameters are 24-bit conversion, operation up to 96 kHz, stereo ADC operation, I2S support, and a 14-SOIC package. The 24-bit resolution provides a nominal 16,777,216 quantization levels per channel, while 96 kHz supports the conversion rate required by many CD-rate and higher-rate audio systems. These figures make the part applicable to consumer audio, communications, multimedia, and embedded audio-conversion equipment. The 14-SOIC package is mechanically compact relative to many older through-hole audio converters and is suitable for conventional surface-mount PCB assembly. Its small pin count should be evaluated carefully in designs requiring multiple analog inputs, auxiliary digital functions, or extensive filtering. The verified distributor data does not expose the complete input topology, clocking architecture, analog reference arrangement, or auxiliary interface implementation, so those details should be confirmed in the manufacturer datasheet before layout is released. For implementation, the analog input path, grounding, and clocking integrity are the decisive engineering areas. Short, symmetrical analog traces, adequate bypass capacitors, and a clean source of digital audio clock signals help preserve converter performance. Designers should also verify supported master and slave clock configurations, input coupling requirements, and the required logical control sequence against the official datasheet. This page consolidates verified distributor specifications, source links, and drop-in replacement information for the Cirrus Logic WM8738CGED. It also separates confirmed parameters from values that still require the manufacturer datasheet, preventing unverified electrical, pinout, and compliance claims from being presented as established facts.
WM8738CGED/R - 24-Bit Stereo ADC, 96kHz, 14-SOIC | Cirrus Logic
Cirrus Logic Inc. WM8738CGED/R is a low-power 24-bit stereo audio analog-to-digital converter with a maximum sampling rate of 96 kHz, supplied in a 14-pin SOIC package. It is designed for audio systems that require digital conversion of left and right analog channels while minimizing component count and board space. The device also includes integrated audio processing and digital audio interface functions, making it suitable for consumer audio, communications, and embedded audio equipment. An ADC is a data-conversion IC that converts continuous analog voltage signals into digital samples. Within the broader semiconductor hierarchy, the WM8738CGED/R belongs to the analog-to-digital converter and audio codec product class, with an I2S digital output that connects to a digital signal processor, audio processor, or other digital audio controller. Its stereo architecture permits simultaneous or coordinated conversion of two audio channels rather than requiring a separate converter for each channel. The principal documented specifications are a 24-bit conversion resolution, a 96 kHz maximum sampling rate, stereo operation, I2S connectivity, low-power operation, and a 14-SOIC package. These characteristics make the converter suitable for digital recording, playback, voice processing, audio capture, and communication equipment. The I2S interface reduces the number of external digital signal lines needed to transfer converted audio data into a host processor. The WM8738CGED/R can be used as the analog front end of a compact stereo audio subsystem. Its multiple digital inputs and outputs support digital-audio signal routing, while integrated mixer, filter, gain, and analog input functions can reduce the need for separate support circuitry. Designers should confirm the required input impedance, clock configuration, codec routing, and system-level channel mapping in the manufacturer datasheet before finalizing the PCB. Typical applications include consumer audio equipment, portable and connected audio products, voice-recording systems, communication terminals, and embedded multimedia platforms. The 14-pin SOIC package is mechanically straightforward for conventional surface-mount assembly, although the analog and digital sections still require careful grounding and decoupling to limit noise coupling. When designing around this converter, prioritize a clean analog supply, short return paths, and separate routing of sensitive audio inputs away from switching nodes and digital clock lines. Confirm the supported input configuration, master or slave clock mode, data format, and required external components against the manufacturer datasheet and reference circuit before production release. This page combines the exact part identification, package information, converter specifications, practical integration guidance, sourcing workflow, and compatibility analysis. It also distinguishes confirmed technical facts from parameters that must be checked directly in the manufacturer datasheet, helping engineers plan a sound evaluation rather than relying on an abbreviated distributor listing.
WM8740SEDS/V - 24-Bit 192 kHz Stereo DAC | Cirrus Logic
Cirrus Logic WM8740SEDS/V is a 24-bit, two-channel high-performance stereo digital-to-analog converter supporting sampling rates up to 192 kHz. It operates from 3.3 V to 5 V, uses an SPI data interface, and is packaged in a 28-pin SSOP. The device is intended for premium digital audio equipment requiring accurate conversion of multichannel PCM data into balanced or unbalanced analog stereo signals. An audio DAC is a data-converter IC that transforms digital audio samples into analog voltages suitable for headphone, line-level, or power-amplifier inputs. Within the broader semiconductor hierarchy, it belongs to the ADC/DAC class of data converters and ultimately to the wider signal-chain and audio-processing ecosystem. The WM8740SEDS/V combines high-resolution conversion, stereo output, serial digital control, and separate analog and digital supply domains in one integrated device. The principal specifications are 24-bit resolution, a maximum sampling rate of 192 kHz, two audio channels, an SPI interface, and a 3.3 V to 5 V supply range. Its operating-temperature range extends from -40°C to +85°C, allowing deployment in consumer, industrial, and professional audio products. The 28-SSOP package supports conventional surface-mount assembly and is available in the WM8740SEDS/V ordering configuration. The converter architecture is optimized for high-performance stereo playback rather than general-purpose signal conversion. Digital audio data enters through the serial interface and is converted into left- and right-channel analog outputs. Supporting the full 192 kHz sampling rate makes the device relevant to studio-quality playback, network audio, digital preamplifiers, and compact hi-fi systems where a conventional lower-rate converter would restrict source compatibility. Typical applications include high-end CD and network-audio players, professional digital mixers, headphone amplifier boards, powered speakers, and digital audio preamplifiers. In each case, the dual-channel architecture provides simultaneous left and right conversion, while the 192 kHz capability supports high-resolution source material. The SPI control interface also allows a host processor or audio interface controller to configure operating modes and retrieve device status. Circuit implementation requires careful treatment of the analog and digital supply rails. Place required decoupling capacitors close to their associated pins, maintain a low-impedance ground return for the analog outputs, and route digital control signals away from sensitive analog output nodes. The output network, amplifier coupling capacitors, and grounding topology should follow the reference circuit and layout guidance in the manufacturer datasheet. This page organizes the WM8740SEDS/V specifications, sourcing information, qualified drop-in candidate, comparison fields, and application guidance into a design-focused reference. It also highlights which compatibility details must be checked against the manufacturer datasheet before a board revision or production substitution is approved.
WM8741GEDS/V - 24-Bit 192kHz Stereo DAC | Cirrus Logic
The Cirrus Logic WM8741GEDS/V is a high-performance stereo digital-to-analog converter with 24-bit resolution, operation up to 192kHz, and a 28-SSOP package. It accepts PCM word lengths from 16 to 32 bits and supports DSD bit-stream data in direct-DSD and PCM-converted formats. According to the manufacturer datasheet, the device is designed for professional recording systems, A/V receivers, and high-specification CD, DVD, and home-theater equipment. An audio DAC is a data converter within the ADC/DAC and signal-conversion hierarchy. It converts digital audio samples into left- and right-channel analog voltages suitable for headphone or line-level amplification. The WM8741 supports both serial control and hardware control, allowing its operating configuration to be managed by a digital audio processor or selected through external hardware. Key features include a two-channel stereo architecture, 24-bit conversion, sampling rates up to 192kHz, advanced digital filtering, and support for DSD data streams. The 28-SSOP package provides a practical surface-mount format for professional and high-end consumer audio equipment. The manufacturer datasheet also states that the WM8741 is pin compatible with the WM8740, which simplifies evaluation of feature and performance differences between those devices. The WM8741 accepts PCM data across a broad word-length range and can process DSD bit-streams in either direct-DSD or PCM-converted modes. This flexibility allows the same stereo DAC to serve conventional PCM playback systems and designs requiring DSD support. Its serial interface supports 2-wire and 3-wire control schemes, while the hardware-control interface provides access to a selected group of device features without relying entirely on software commands. Typical applications include professional recording equipment, A/V receivers, high-end CD and DVD players, and home-theater systems. It is also suitable for digital audio preamplifiers, network audio players, and other stereo playback products where 24-bit resolution and operation up to 192kHz are useful. The dual-channel implementation is intended for conventional left/right audio rather than multichannel surround decoding. A key design consideration is the dual supply arrangement identified in the available product data: analog and digital circuitry use separate supply sources, and the supported analog supply range is 3.15V to 3.6V or 5V. Layout should therefore preserve clean analog and digital return paths, minimize digital interference near the converter outputs, and follow the manufacturer's recommended application circuit and decoupling guidance. This product record combines verified distributor availability, the manufacturer datasheet, application guidance, pin-compatibility information, and practical selection notes. It also identifies the verified WM8740 and WM8742 family alternatives while clearly separating documented facts from parameters that still require device-level datasheet confirmation.
WM8742GEDS/V - 24-Bit 192kHz Stereo DAC | Cirrus Logic
The Cirrus Logic WM8742GEDS/V is a 24-bit, 192kHz stereo digital-to-analog converter with advanced digital filtering, packaged in a 28-SSOP. It supports PCM word lengths from 16 to 32 bits and accepts DSD bit-stream data in direct DSD or PCM-converted modes, making it a high-performance audio DAC for professional recording equipment, A/V receivers, and home-theater systems. An audio DAC is a signal-conversion semiconductor that transforms digital PCM or DSD audio samples into analog left- and right-channel voltages. Within the broader integrated-circuit hierarchy, the WM8742 belongs to the ADC/DAC class, operates as an audio data converter, and ultimately supports digital audio playback and signal-chain reconstruction. Its dual-channel architecture provides one analog output channel for each stereo signal while accepting a common digital audio stream. The WM8742’s principal features include 24-bit resolution, operation up to 192kHz, support for 16-bit through 32-bit PCM input, DSD compatibility, advanced digital filtering, and selectable serial-control and hardware-control schemes. The 2/3-wire serial interface provides access to device features, while the hardware interface permits control of a defined subset of functions. These capabilities provide flexibility when pairing the converter with a digital audio processor, receiver, or source device. The WM8742GEDS/V is offered in a 28-SSOP measuring approximately 0.209 inches, or 5.30mm, in width. The manufacturer documentation states that this package is pin compatible with the WM8740 and WM8741, which can simplify board-level family transitions when register behavior, feature requirements, and performance targets are appropriately matched. The serial interface also makes the converter suitable for systems where a compact, multiwire digital connection is preferable to a parallel data bus. Typical applications include professional recording systems, A/V receivers, CD and DVD players, and high-specification home-theater equipment. These systems benefit from the combination of high-resolution PCM support, 192kHz operation, DSD handling, and advanced filtering. In each application, the DAC converts the source device’s digital stream into the analog line-level signals required by subsequent amplifiers, mixers, or output stages. Designers should verify the digital audio interface format, supported master-clock arrangement, analog output implementation, and required bypass components against the manufacturer datasheet before layout. The 28-SSOP footprint demands careful decoupling and short analog routing, while software configuration must match the selected PCM or DSD operating mode to avoid format or clocking errors. This product page organizes the WM8742GEDS/V’s core specifications, family drop-in options, application guidance, package information, and design considerations into a practical engineering reference. It also distinguishes pin-compatible alternatives by documented feature differences, helping designers make informed replacement decisions without confusing electrical compatibility with complete functional equivalence.
WM8759GED/RV - 24-Bit Stereo DAC with Headphone Buffer
Wolfson Microelectronics plc WM8759GED/RV is a 24-bit stereo digital-to-analogue converter with a 192 kHz sampling rate and an integrated headphone buffer, housed in a 14-pin SOIC package. The converter combines a serial audio interface, digital interpolation filters, multi-bit sigma-delta modulators, stereo DAC channels, line outputs, and headphone outputs. A digital-to-analogue converter, or DAC, is an audio interface integrated circuit that converts digital PCM samples into analog voltage signals. In the signal hierarchy, the WM8759GED/RV belongs to the DAC family within audio codec and data-converter ICs. Its integrated headphone buffer reduces the external circuitry required to drive headphones while preserving a compact 14-pin surface-mount implementation. The principal features include support for data input word lengths up to 24 bits and sampling rates up to 192 kHz. Digital interpolation filtering prepares incoming audio data for the multi-bit sigma-delta modulator stages, while the two stereo DAC channels generate the analog line-level outputs. A dedicated headphone output section provides a practical path from digital audio source to amplified headphone drive. Internally, the WM8759GED/RV follows a mixed-signal signal chain: a serial interface accepts digital audio data, digital interpolation filters shape that stream, multi-bit sigma-delta modulators perform noise-shaping conversion, and stereo DAC outputs reconstruct the analog waveform. This integration makes the device suitable for compact consumer audio products that require both line-level output and headphone connectivity without separate DAC and headphone-driver packages. Typical applications include portable DVD players, MP3 players, consumer equipment with line and headphone outputs, portable media systems, digital audio accessories, and compact audio playback products. The 24-bit interface and 192 kHz capability align with high-resolution digital audio sources, while the 14-pin SOIC package supports straightforward surface-mount assembly. Designers should confirm interface timing, supported master and slave clock arrangements, output configuration, required external capacitors, analog routing, and headroom against the manufacturer datasheet before finalizing the PCB. Because this part combines digital control, mixed-signal conversion, and headphone drive, grounding and decoupling recommendations from the manufacturer application guidance should be followed closely. This product record organizes the WM8759GED/RV technical identity, package information, commercial workflow, and application guidance into an engineering-focused reference for evaluating this stereo DAC and headphone-buffer solution.
WM8761CBGED - 24-Bit 192kHz Stereo DAC | Cirrus Logic
The Cirrus Logic WM8761CBGED is a 24-bit stereo digital-to-analog converter for digital audio systems, supporting sampling rates up to 192 kHz and packaged in a 14-pin SOIC. Its serial interface accepts 16-bit to 24-bit data through I2S, right-justified, or DSP formats, while integrated digital interpolation filters, multi-bit sigma-delta modulators, and stereo DAC channels convert decoded digital audio into left- and right-channel analog signals. An audio DAC is a digital-to-analog converter, a specialized interface IC within the ADC/DAC product family and the broader signal-conversion semiconductor hierarchy. Its purpose is to reconstruct continuous analog voltage waveforms from sampled digital audio data. The WM8761 is positioned for consumer and multimedia audio equipment, including DVD systems, home-theater equipment, digital television, and systems receiving decoded AC-3, DTS, or MPEG audio streams. The WM8761 supports data word lengths from 16 to 24 bits and sampling rates up to 192 kHz. Selectable serial-audio formats give the converter flexibility when connecting to different digital-audio decoders, digital signal processors, or microcontrollers. Digital de-emphasis, mute control, and digital interpolation filtering support practical playback-chain integration. A 14-pin SOIC package also keeps the footprint compact relative to older, larger converter implementations. Internally, the device combines a serial interface port with digital interpolation filters, multi-bit sigma-delta modulators, and stereo DAC output stages. The interpolation filters prepare the incoming high-rate digital stream for the DAC stages, while the sigma-delta architecture represents the converted signal using high-resolution noise shaping. The Cirrus Logic manufacturer datasheet identifies the WM8761 as a low-cost stereo converter intended for decoded surround-sound and conventional stereo audio playback. Typical deployments include digital television audio reproduction, DVD-player output, home-theater receiver analog stages, AC-3 and DTS decoder interfaces, and MPEG audio decoder output paths. The I2S interface is particularly useful for digital audio buses, while right-justified and DSP modes accommodate source devices with different data alignment. System designers should match the digital source word length and clocking method to the supported converter configuration. Circuit implementation requires a stable analog and digital supply arrangement, correct master-clock and serial-audio routing, and output-network selection suited to the next analog stage. The 14-pin package should be checked against the manufacturer pin-description table before assigning PCB nets. Designers must also confirm whether the target channel requires mute, de-emphasis, a particular data format, or an external output filter appropriate to the intended audio bandwidth. This product page consolidates the manufacturer specifications, ordering information, application context, design cautions, and sourcing workflow for the WM8761CBGED. It also distinguishes the verified discontinued status of the original device from the separate task of finding a genuinely pin-compatible replacement, avoiding unsupported assumptions about substitute ICs.
WM8762CGED - 24-Bit 192kHz Stereo DAC | Cirrus Logic
Cirrus Logic WM8762CGED is a 24-bit stereo digital-to-analog converter IC operating up to 192 kHz and housed in an 8-pin SOIC package. Verified distributor data identifies it as a serial audio DAC with a 24-bit resolution, 192 kHz capability, and an 8-SOIC format. A DAC is a data-conversion semiconductor that transforms digital audio samples into left- and right-channel analog voltages. In the signal hierarchy, the WM8762CGED belongs to the digital-to-analog converter class, then to the ADC/DAC family and the broader signal-conversion and audio interface categories. Its stereo outputs are suited to audio playback paths in consumer, communications, and embedded audio systems. The verified data identifies three headline characteristics: 24-bit resolution, support for operation up to 192 kHz, and an 8-pin SOIC package. These values position the converter for designs requiring higher-resolution digital audio and a compact surface-mount footprint. The serial interface and stereo output architecture allow a digital audio source to feed two analog channels through one converter IC. The WM8762CGED family is identified in distributor listings as a Wolfson/Cirrus Logic audio DAC. Its practical implementation depends on the host audio interface, clocking scheme, analog output network, supply arrangement, and the format expected by the connected digital source. Exact pin names, voltage ratings, output architecture, and supported digital audio formats require confirmation from the manufacturer datasheet before PCB or firmware design. Typical audio uses include digital audio players, multimedia systems, communications equipment, and embedded sound-control platforms. In a player design, the converter would typically sit between the digital audio processor and an analog output stage feeding headphones or a line-input amplifier. The compact SOIC package can simplify routing where a small surface-mount footprint is important. Designers should verify the datasheet pinout, recommended decoupling, clock requirements, analog output connection, and supported operating conditions. Since the supplied data does not state supply voltage, pin functions, output mode, or digital interface details, those values are intentionally marked as data needed rather than inferred. This page separates verified distributor facts from engineering information that still requires datasheet confirmation. This page consolidates verified distributor references, package identity, audio-resolution information, and selection guidance. It does not treat generic cross-reference results as proof of drop-in replacement; engineering equivalence must be confirmed by package, pinout, electrical limits, and digital-interface compatibility.
WM8766GEDS/V - 24-Bit 6-Channel 192kHz DAC | Cirrus Logic
The Cirrus Logic WM8766GEDS/V is a 24-bit, six-channel digital-to-analog converter operating at up to 192 kHz and supporting DSP and I2S audio interfaces. The device is supplied in a 28-pin SSOP package, uses a 2.7 V to 5.5 V supply range, and is specified for -25 °C to 85 °C operation. It is designed for multichannel audio systems requiring multiple synchronized analog outputs. An audio DAC is a data-conversion IC that transforms digital audio samples into corresponding analog voltage signals. In the broader hierarchy, the WM8766GEDS/V is a digital-to-analog converter within the ADC/DAC family of data-converter and signal-conversion integrated circuits. Such devices are commonly positioned between an audio processor and an analog amplification or speaker-output stage, where they translate I2S or DSP data into left, right, and additional multichannel outputs. The principal features of the WM8766GEDS/V include six DAC channels, 24-bit resolution, a maximum sampling rate of 192 kHz, and support for both I2S and DSP serial interfaces. Its 2.7 V to 5.5 V operating supply supports integration with conventional consumer and embedded audio equipment. The 28-pin SSOP package also provides a surface-mount format suitable for automated PCB assembly, although its lead pitch is finer than that of a standard SOIC package. The converter architecture is intended for high-resolution multichannel playback rather than general-purpose signal generation. A 24-bit data path allows the source system to preserve a larger amplitude-resolution range than lower-resolution converters, while operation at 192 kHz supports high-rate digital audio streams. The available I2S interface is useful for standard audio links between a digital signal processor and the DAC, while DSP interface support provides a framed alternative for compatible source components. Typical applications include DVD and home-cinema surround-sound systems, multichannel hi-fi equipment, automotive audio products, and other audiovisual equipment requiring several synchronized DAC outputs. The six-channel architecture is particularly appropriate when left, right, center, surround, and additional playback channels must be generated from one converter package. Designers should confirm the supported clock, audio-interface, supply, and output configuration against the manufacturer datasheet before layout. The 28-pin SSOP footprint requires a land pattern tailored to its 0.65 mm lead pitch, and analog and digital supply routing should follow the decoupling and grounding recommendations in the Cirrus Logic documentation. Pin assignments, output-mode options, and electrical limits must be checked for the selected board revision. This product record combines the verified WM8766GEDS/V channel count, resolution, sampling rate, interface, supply, package, temperature, and lifecycle information with practical integration guidance. It also distinguishes verified drop-in replacements from related Cirrus Logic family members that may differ in temperature grade, order code, or electrical configuration.
WM8768GEDS/V - 8-Channel 24-Bit 192kHz Audio DAC | Cirrus Logic
Cirrus Logic WM8768GEDS/V is an 8-channel audio digital-to-analog converter with 24-bit resolution, support for operation up to 192kHz, digital signal processing, volume control, and an I2S interface. The device is supplied in a 28-pin SSOP package and is intended for DVD, surround-sound, home hi-fi, automotive, and other audio-visual equipment. The WM8768 is a multi-channel audio DAC. In the signal-chain hierarchy, it belongs to the digital-to-analog converter category, within ADC/DAC converters and data-converter integrated circuits. Such converters translate digital audio samples into analog voltage signals that drive speakers, headphones, amplifiers, or other analog audio stages. The eight-channel architecture is useful when one system must support several simultaneous audio outputs rather than requiring a separate single-channel converter for each output. The verified distributor descriptions identify the WM8768GEDS/V as an audio DAC with 24-bit resolution, 192kHz maximum sampling capability, DSP processing, I2S connectivity, volume control, and 103dB dynamic range as stated by Mouser. It also identifies the physical format as a 28-pin SSOP. These characteristics make the converter suitable for high-fidelity multichannel playback, receiver and amplifier designs, automotive audio systems, and other applications requiring multiple digital audio channels. The digital interface and integrated DSP distinguish the WM8768 from a simple parallel DAC. I2S is commonly used to connect digital audio sources to converters, while on-chip signal processing and volume control reduce the amount of external processing required for channel management and gain adjustment. The available source material does not provide a complete electrical description of the DSP filters, clocks, output architecture, analog supply limits, or digital I/O levels; these details must therefore be confirmed in the manufacturer datasheet before schematic capture. A typical design would accept I2S audio from a source processor, configure the converter for the desired channel map and sample rate, and route the analog outputs toward line-level amplification. Decoupling and output filtering must follow the manufacturer reference circuit. Because the verified data does not include capacitor values or a full pin assignment, engineers should not infer those values from generic audio guidance. The WM8768GEDS/V is appropriate when the design needs an integrated eight-channel, high-resolution audio DAC rather than a low-channel-count codec. It is also relevant to CD, DVD, home theater, automotive infotainment, and powered-speaker systems, provided the system clocking, supported sample-rate configuration, and analog output topology match the finished board. Current distributor listings show the part available through major electronics distributors, while detailed pricing and lifecycle terms should be checked against live inventory. This page consolidates the verified 24-bit, 192kHz, eight-channel, DSP, I2S, volume-control, 103dB, and SSOP-28 facts while separating confirmed data from missing technical details. It also identifies same-family alternatives and provides practical design cautions for clocking, filtering, grounding, and supply decoupling without inventing unverified component values.
WM8775SEDS/V 24-Bit 96kHz Stereo ADC | Cirrus Logic
The Cirrus Logic WM8775SEDS/V is a high-performance stereo audio analog-to-digital converter with a 24-bit resolution, a maximum sampling rate of 96 kHz, and a four-channel input multiplexer. The device is packaged in a 28-pin SSOP and is designed for digitizing multiple analog audio sources used in home hi-fi, automotive, and audiovisual equipment. An audio ADC is an integrated circuit that converts analog audio voltages into a digital representation for processing, storage, transmission, or playback. The WM8775 belongs to the broader ADC and DAC product category, specifically a multiplexed stereo audio ADC. Its four-channel input mixer allows several analog sources to be selected and digitized through the same conversion engine, reducing the need for separate converters when a system must process multiple audio inputs. The primary verified specifications for the WM8775SEDS/V are its 24-bit conversion resolution, 96 kHz sampling capability, stereo ADC architecture, four-channel input multiplexer, I2S digital interface, and 28-pin SSOP package. According to the manufacturer-linked datasheet information in the verified sources, the device is intended for high-performance audio digitization and surround-sound processing applications. The manufacturer datasheet is the authoritative source for detailed electrical limits, clock requirements, analog input ranges, digital timing, recommended application circuits, and package dimensions. Typical application areas include surround-sound processors, home audio equipment, automotive audio systems, and other audiovisual products that require multiple analog audio inputs to be converted into a digital format. In these systems, the multiplexer can select different source signals while the stereo ADC performs the actual conversion. The I2S interface supports integration with digital audio processors, decoders, receivers, and other equipment using compatible serial audio connections. Designers should verify the WM8775SEDS/V pinout, analog input configuration, clocking requirements, digital interface timing, supply recommendations, and decoupling requirements against the manufacturer datasheet before layout. Because the available verified material is primarily distributor and indexed-datasheet information rather than a complete numerical electrical table, unspecified values are marked as [DATA_NEEDED] rather than inferred. The SSOP footprint also requires attention to thermal performance, lead spacing, soldering profile, and analog signal routing. This page combines verified distributor identification, datasheet indexing, package information, application context, comparison structure, and engineering design guidance. It distinguishes documented facts from parameters that require confirmation in the official WM8775 datasheet, helping engineers identify the correct 24-bit, 96 kHz multiplexed stereo ADC without relying on unsupported assumptions.
WM8781GEDS/V - 24-Bit Stereo ADC | Cirrus Logic | Audio
Cirrus Logic WM8781GEDS/V is a 24-bit, 192 kHz stereo audio ADC with I2S support, supplied in a 20-pin SSOP package. Its headline specifications are a 24-bit conversion resolution, a maximum sampling rate of 192 kHz, stereo conversion capability, and a 2.7 V to 3.6 V analog supply range. The device also supports 384FS master mode according to the manufacturer product information. These characteristics place it in the high-resolution audio ADC category and make it suitable for digital audio equipment requiring simultaneous left- and right-channel conversion. An ADC is an analog-to-digital converter, a mixed-signal integrated circuit that samples an analog audio voltage and produces a corresponding digital representation. Within the wider semiconductor hierarchy, the WM8781GEDS/V is an audio ADC, a type of data-converter IC and interface IC used for digital audio capture. Its I2S interface provides a conventional connection to digital audio processors, while the 24-bit resolution preserves substantially more amplitude detail than lower-resolution converters. The 192 kHz maximum sampling rate supports high-resolution digital audio workflows and exceeds the 48 kHz rate commonly used for CD-quality playback. The 384FS master-mode capability adds clocking flexibility for systems in which the converter must organize digital audio timing. Stereo operation consolidates two audio channels in one package, reducing the number of separate converters needed in a two-channel audio path. The WM8781GEDS/V operates from a 2.7 V to 3.6 V supply and is specified for an operating temperature range of -25°C to +85°C. Its 20-SSOP package is approximately 5.30 mm wide and 0.209 inch, providing a surface-mount implementation for compact audio products. The supplied distributor information does not provide the complete electrical limits, analog input range, clock requirements, pin mapping, or package height. Typical applications include digital recording equipment, professional audio interfaces, consumer playback systems, active loudspeakers, audio expansion modules, and embedded media platforms. The device can sit between analog microphone or line-level front ends and an I2S-capable DSP, codec, or digital audio controller, converting the analog signal before digital processing and storage. Designers should verify the analog input range, common-mode limits, master and slave clock modes, data format, and exposed thermal and supply requirements against the complete manufacturer datasheet before layout. Input and output return paths should preserve low-noise behavior, while decoupling and grounding should prevent converter and digital-interface noise from coupling into the analog section. This page consolidates verified distributor specifications, package information, functional application guidance, and same-family replacement candidates. It also identifies the missing pinout, detailed timing, absolute maximum ratings, and verified pricing data that engineers should obtain from the manufacturer datasheet before releasing a production design.
WM8782ASEDS/RV - 24-Bit Stereo Audio ADC | Cirrus Logic
The Cirrus Logic WM8782ASEDS/RV is a 24-bit stereo audio analog-to-digital converter with a maximum sampling rate of 192,000 samples per second, an I2S digital interface, and a 20-pin SSOP package. It operates from a 2.7 V to 5.5 V analog and digital supply range and is specified for temperatures from -40°C to +85°C. The converter is designed for recordable-media equipment that requires two-channel audio capture with high-resolution digital output. An audio ADC converts left- and right-channel analog input voltages into a sequence of digital samples. Within the data-converter hierarchy, the WM8782ASEDS/RV is a stereo delta-sigma ADC: a specialized analog-to-digital converter that uses continuous-time oversampling and digital filtering to produce a serial digital representation of two analog audio channels. Its 24-bit resolution preserves fine amplitude detail, while the I2S interface provides a compact connection to audio processors, codecs, or digital recording systems. The WM8782ASEDS/RV supports stereo line-level inputs and includes an internal front-end operational amplifier capable of accommodating analog input signals above the normal line-level range. FORMAT and IWL control pins provide compatibility with three industry-standard audio interface configurations, allowing the digital word length and interface format to be selected according to the host processor. A power-down mode is also identified in the product listing, which is useful for reducing consumption when recording is inactive. The device combines a 2.7 V minimum operating voltage with 24-bit conversion and a 192 kSPS maximum rate in a compact surface-mount SSOP-20 package. These characteristics position it for consumer and professional audio capture, including multichannel conversion through multiple stereo devices, digital mixing equipment, and recordable-media products. Its operating-temperature range supports applications beyond ordinary room-temperature consumer environments. A typical implementation routes left and right analog sources through the stereo input network, configures FORMAT and IWL for the connected digital interface, and connects the I2S data, clock, and word-select signals to an audio controller. Decoupling close to the supply pins and controlled return paths are essential because high-resolution audio performance depends on a clean analog reference and low-noise digital coupling. The main design trade-off is the resolution and throughput offered in a relatively compact 20-pin SSOP package. Compared with lower-resolution converters, the 24-bit output preserves more dynamic range but requires careful analog conditioning and clock-layout discipline. Compared with higher-channel-count converters, the two-channel architecture is simpler and well matched to a stereo source. This product record combines the manufacturer device description, exact electrical and package details, sourcing status, technical FAQs, and practical implementation guidance. It also highlights where application-specific data such as the complete pin map and internal-reference behavior must be confirmed in the manufacturer datasheet before layout signoff.
WM8782SEDS/V - 24-Bit 192kHz Stereo ADC | Cirrus Logic
Cirrus Logic WM8782SEDS/V is a 24-bit, 192kHz stereo audio analog-to-digital converter with an I2S digital interface, housed in a 20-pin SSOP package. The converter supports two analog input channels, master or slave clocking, and an integrated front-end op-amp for line-level signals. An audio ADC is a semiconductor that converts left and right analog audio voltages into digital words for processing, storage, transmission, or playback. The WM8782 belongs to the broader hierarchy of audio converter, data-converter, analog-to-digital converter, and integrated-circuit families. Its stereo architecture captures two channels simultaneously, while its digital output can feed an audio processor, codec, digital mixer, or digital recording system. The WM8782SEDS/V provides 24-bit resolution and sampling rates from 8kHz to 192kHz. Its sigma-delta ADC architecture supports 32x, 64x, or 128x oversampling, while the output word length can be configured from 16 to 24 bits. FORMAT and IWL control inputs permit operation in standard audio-interface configurations, reducing the need for external logic or a separate digital interface controller. Master and slave clocking schemes are controlled through the M/S input, allowing the converter to work with external master clocks or generate its own audio clock in master mode. The integrated front-end op-amp accepts analog input signals greater than the nominal line-level range, while the two-channel input structure supports stereo source capture. These features make the converter suitable for compact digital audio equipment that requires high-rate conversion without a large external analog front end. Typical uses include consumer recording equipment, digital mixers, multichannel sound-card inputs, media-capture systems, and industrial audio interfaces. The device is also appropriate for projects requiring 192kHz acquisition when the host processor can accommodate the corresponding data rate. Its 20-pin SSOP package supports conventional surface-mount assembly, although careful grounding and decoupling remain essential for audio performance. During layout, place input, output, and decoupling components according to the pin-description table and recommended application circuit in the manufacturer datasheet. The analog input and digital interface paths require a quiet ground strategy, short return paths, and controlled clock routing. Because this converter performs high-resolution signal acquisition, bypassing, grounding, and supply sequencing can influence channel matching and overall signal integrity. This product page combines the device identity, verified technical attributes, lifecycle information, source links, replacement analysis, and practical design guidance. It helps engineers distinguish exact package compatibility from merely similar ADC functions and plan PCB, interface, and sourcing decisions before committing the WM8782SEDS/V to a design.
WM8783GED/RV - 24-Bit Stereo Audio ADC | Cirrus Logic
The Cirrus Logic WM8783GED/RV is a 24-bit stereo audio analog-to-digital converter designed for digital audio systems. It accepts single-ended analog line inputs, supports sampling rates up to 96 kSPS, and provides an I2S digital audio interface. The component is housed in an 8-pin SOIC package. The WM8783 belongs to the audio ADC category within the broader analog-to-digital converter and mixed-signal IC hierarchy. Audio ADCs convert continuous analog audio signals into digital sample streams for processing, storage, transmission, or playback. The WM8783 is intended for applications such as set-top boxes, DVD systems, and other consumer audio equipment where stereo line-level signals must be digitized with a compact interface. Key features include 24-bit resolution, a maximum sampling rate of 96 kSPS, stereo analog inputs, and an I2S output interface. The device is described as a compact, low-cost ADC for set-top box and DVD applications. Its stereo input architecture is suitable for two-channel audio acquisition, while the digital output allows direct connection to a digital audio processor, codec, or system interface. The WM8783GED/RV is manufactured on a CMOS process and is therefore susceptible to electrostatic discharge damage during handling. ESD-safe handling procedures are important during soldering, inspection, and production assembly. The device's function is straightforward for an audio converter: analog signals enter through the stereo input pins, are sampled and quantized by the ADC, and are transferred over the I2S interface as digital audio data. Typical applications include set-top box audio paths, DVD player analog input stages, consumer audio receivers, and embedded multimedia systems. The 96 kSPS maximum rate supports high-resolution audio conversion, while 24-bit data provides substantial dynamic range for line-level sources. System designers should verify the analog input range, reference implementation, clocking requirements, and digital interface configuration against the manufacturer datasheet before finalizing the circuit. This page combines the WM8783GED/RV product identity, core ADC specifications, application guidance, and design considerations into a concise engineering reference. It is intended to help engineers identify suitable use cases, plan board-level integration, and evaluate equivalent parts without overlooking pin compatibility, interface requirements, or supply-availability constraints.
WM8783GED/V Stereo 98kHz Audio ADC | Cirrus Logic
Cirrus Logic WM8783GED/V is a stereo low-power audio analog-to-digital converter with a 98 kHz sampling rate and 24-bit I2S output, supplied in an 8-pin SOIC package. The verified manufacturer-family source describes it as a stereo low-power ADC, while the retrieved distributor data identifies the same device family for 96 kHz operation. It is designed for compact audio capture, playback, and mixed-signal systems requiring dual-channel conversion. An ADC is an analog-to-digital converter, a mixed-signal integrated circuit that converts continuously varying analog audio voltages into digital samples. In the broader component hierarchy, an audio ADC belongs to data converters, mixed-signal semiconductors, and signal-chain ICs. The WM8783GED/V therefore sits between an analog microphone or line input and a digital audio interface such as I2S. The principal verified features are stereo operation, a 24-bit conversion format, I2S digital output, and a family sampling-rate capability reported as 98 kHz in distributor material and 96 kHz in the Wolfson-family result. The device is identified as low power, making it relevant to embedded audio systems where power consumption, channel count, and board area constrain the architecture. The manufacturer-family datasheet source also indicates that the device is manufactured on a CMOS process and is ESD-sensitive. WM8783GED/V is suitable for digital recording front ends, USB audio adapters, industrial audio capture, portable audio equipment, and consumer audio systems. In each case, the stereo ADC can convert left and right analog inputs into digital samples for downstream processing or transmission. The I2S interface helps simplify connection to digital audio controllers, DSPs, and microcontrollers, although the host device must support the required clocking and framing format. When selecting this part, verify the exact electrical characteristics, analog input range, clock requirements, master or slave operating mode, and package pin assignment in the current manufacturer documentation. Do not infer those values from generic ADC descriptions. For replacement work, confirm that the candidate uses the same SOIC footprint and pin-to-pin signal arrangement rather than relying only on a similar sample rate or converter function. This page combines the verified source snippets for the WM8783GED/V family with engineering-oriented application and selection context. Because the retrieved data does not provide a complete current manufacturer product page, several detailed parameters remain explicitly marked for verification rather than being guessed.
WM8786GEDS/V - 24-Bit 192kHz Stereo Audio ADC | Cirrus Logic
The Cirrus Logic WM8786GEDS/V is a 24-bit, 192kHz stereo audio analog-to-digital converter with differential inputs, digital audio processing, and I2S output in a 20-pin SSOP package. The device is identified by the WM8786GEDS/V manufacturer part number and is intended for high-performance recordable media applications. A stereo audio ADC is a data-conversion IC that accepts two analog audio channels and converts them into digital samples for processing, storage, transmission, or playback. The WM8786GEDS/V belongs to the ADC/DAC and audio data-converter hierarchy, where differential inputs, integrated audio DSP, and a high-resolution serial interface help simplify audio capture designs. Verified distributor and manufacturer information identifies the WM8786GEDS/V as an audio ADC with 24-bit resolution, operation up to 192kHz, DSP capability, differential inputs, and a 20-SSOP package. The stereo architecture supports simultaneous left and right audio conversion, while the digital audio interface is identified as I2S. These features make the device suitable for consumer audio equipment, recording systems, digital audio equipment, and embedded audio products. The WM8786GEDS/V is differentiated from general-purpose data converters by its dedicated audio-oriented feature set. Its 24-bit resolution supports high-fidelity capture, the 192kHz maximum sample rate supports high-resolution audio, and differential analog inputs help reduce common-mode noise in balanced audio signal paths. The integrated DSP function can assist with signal conditioning and audio processing, although the exact operating modes and filter settings must be confirmed in the manufacturer datasheet. Typical applications include stereo recording equipment, consumer audio systems, digital mixing and amplification products, USB or portable audio interfaces, and other systems requiring two-channel audio capture. In these applications, the ADC can be placed between balanced or appropriately conditioned analog audio inputs and an I2S-capable digital audio processor. The 20-SSOP package supports compact PCB layouts, but its fine pitch requires careful soldering and layout practices. Designers should confirm the analog input range, differential input configuration, reference-voltage requirements, digital supply levels, clocking requirements, and supported I2S formats before releasing a production design. Decoupling capacitors should be placed close to the supply pins, and analog and digital routing should be separated to reduce switching noise coupling into the audio inputs. The manufacturer datasheet and application information should be used for the final input, clock, filtering, and layout implementation. This product page consolidates verified distributor identity and product descriptions with package, application, selection, and engineering guidance. It distinguishes the WM8786GEDS/V from the related WM8786GEDS/RV ordering variant and provides a practical framework for confirming pin and PCB compatibility before substitution.