Amplifier ICs
بەرهەمەکان (12)
INA250A4PW - 36V Bidirectional Current Sense Amplifier | Texas Instruments
The Texas Instruments INA250A4PW is a bidirectional, voltage-output precision current-sense amplifier with an integrated shunt resistor, a gain of 4000 V/V, and a 16-pin TSSOP package. It supports common-mode voltages from 0 V to 36 V, operates from a single 2.7 V to 36 V supply, and is specified over a -40°C to 125°C temperature range. A current-sense amplifier is a specialized analog signal-conditioning device that measures the voltage generated across a precision shunt resistor and converts that voltage into a proportional output. The INA250 belongs to the current-shunt monitor hierarchy, combining a low-side or high-side bidirectional current-measurement circuit with integrated precision resistance. This integration removes the need for a separate external shunt while improving calibration consistency and reducing board area. The A4 gain version provides 4000 V/V voltage gain, allowing small shunt-generated signals to be amplified into a voltage that can be measured accurately by an ADC, microcontroller, or control system. Bidirectional operation allows current in either direction to be distinguished around a zero-volt reference. An external reference voltage can also shift the output operating point, supporting systems that require a nonzero current indication at zero current. The integrated shunt and precision signal path provide calibrated measurement accuracy with very low temperature-drift performance. Because the common-mode range extends to 36 V, the device can monitor power-conversion, motor-drive, and industrial current paths without requiring the supply voltage to exceed the sensed bus voltage. The single-supply operating range extends down to 2.7 V, supporting low-voltage systems while the measurement input remains independent of the supply voltage. Typical applications include motor-control current feedback, industrial power-supply monitoring, battery charge and discharge measurement, solenoid-driver diagnostics, LED-driver protection, and high-side or low-side current sensing in 12 V, 24 V, and 36 V systems. The device is particularly useful when the measured current can flow in either direction or when a compact PCB footprint is more important than using a discrete shunt network. For implementation, keep the power-supply and ground connections compact, place input-side filtering close to the device when switching-node transients are present, and confirm that the common-mode and supply voltages remain within their rated limits. The output and reference network should be checked in system calibration to account for the analog input range of the ADC or controller. This page combines the device specifications, manufacturer documentation, practical application guidance, and a parameter-focused comparison with same-family alternatives to support footprint-compatible design decisions and engineering reviews.
STA350BW - 2.1-Channel Digital Audio System | STMicroelectronics
The STMicroelectronics STA350BW is a 2.1-channel high-efficiency digital audio system with an integrated digital audio processor, digital amplifier controller, FFX power output stage, and four power outputs in a PowerSSO-36 EPD package. Its documented operating supply range reaches 26 V, with a 30 V absolute maximum rating. The system can deliver 1 x 75 W into 4 Ω with the supply voltage set to 25 V under the manufacturer’s stated conditions. A digital audio system combines signal processing, amplifier control, and power-stage conversion into one integrated device. Within the broader semiconductor hierarchy, the STA350BW belongs to the power-management IC class and specifically serves as a digital Class-D audio amplifier and Sound Terminal. This integration reduces the number of separate blocks required for a compact audio output stage while retaining programmable audio processing. The STA350Bx family provides up to 8 programmable biquads per channel for equalization. Four power outputs support multi-channel and 2.1-channel system configurations. The supplied test condition of VCC = 24 V, f = 1 kHz, fsw = 384 kHz, ambient temperature of 25°C, and RL = 8 Ω provides a defined basis for comparing datasheet specifications; results obtained under different conditions should not be treated as directly equivalent. The device integrates digital audio processing, digital amplifier control, and the FFX output architecture into a single high-power sound-terminal solution. Its four-output architecture provides flexibility for stereo, multi-channel, or subwoofer arrangements, while the digital equalization capability permits channel-specific tonal shaping. The package includes an exposed pad that must be handled according to the manufacturer’s thermal and layout guidance. Typical applications include compact active speakers, multimedia speaker systems, home-theater sound terminals, powered subwoofers, and consumer audio products requiring multiple amplified outputs. In these systems, the integrated processing and output stage can simplify the signal chain compared with a design that uses separate DSP, amplifier-control, and power-amplifier blocks. The 75 W output capability is particularly relevant to compact high-power speaker enclosures. The principal design consideration is thermal management. The exposed pad is integral to heat dissipation and must be connected to a suitable copper area according to the manufacturer datasheet. Designers should also maintain the required input, output, filtering, and decoupling layout, preserve the specified switching conditions, and account for the difference between the 26 V operating range and 30 V absolute maximum rating. This product page consolidates the verified manufacturer specifications, distributor availability information, package details, and engineering guidance for the STA350BW. It also distinguishes directly documented characteristics from parameters that require confirmation from the complete datasheet, helping engineers evaluate thermal design and replacement decisions without inferring unverified compatibility.
STA508 - 40V 4.5A Quad Power Half Bridge | STMicroelectronics
The STMicroelectronics STA508 is a 40 V, 4.5 A monolithic quad power half-bridge stage implemented in Multipower BCD technology and packaged in PowerSO-36. It provides four configurable half-bridge outputs that can operate as two full bridges, one full bridge with doubled output-current capability when CONFIG is tied to VDD, or individual half bridges in Binary mode with reduced current capability. A power half bridge is a switching amplifier stage containing two MOSFETs arranged between the supply and ground rails, with one output node at their midpoint. A quad half-bridge IC consolidates four such stages so Class D audio controllers can drive stereo, multi-channel, or bridged speaker systems efficiently. The STA508 is therefore positioned within the hierarchy of Class D audio amplifier IC, power half-bridge, audio output stage, and power management semiconductor. Key verified features include a 40 V maximum power-supply rating, 4.5 A output-current capability, four integrated power half bridges, configurable bridge topology, and Multipower BCD process technology. Configuration flexibility allows the same device organization to support dual-bridge, single-bridge, and Binary half-bridge operation, reducing board-area requirements when a product family needs multiple channel counts. The device is intended to work with an external Class D audio controller rather than directly accept analog audio. The controller generates gate-drive signals, while STA508 supplies the high-current switching path to the speaker outputs. Its BCD construction combines analog control capability with efficient power-device integration, making it suitable for compact, high-power audio systems where board area and channel flexibility matter. Typical applications include stereo Class D amplifiers, multi-channel home audio, active speakers, powered subwoofers, and compact consumer audio products. A 24 V system is specifically shown in the verified web material for an STA508 monoblock amplifier, illustrating use of the device's 40 V supply capability. Thermal and layout design are critical because the PowerSO-36 package and external heatsink must dissipate the power-stage loss. The power and ground pins, output nodes, controller interface, and decoupling network should follow the manufacturer datasheet layout exactly. Keep high-current loops compact and provide adequate copper and heatsinking; otherwise output-current capability can be limited by junction temperature before the electrical rating is reached.
STA540SAN - 4x10W Class-AB Audio Amplifier | STMicroelectronics
The STMicroelectronics STA540SAN is a 4 x 10 W dual/quad power amplifier for high-quality sound applications. The device contains four single-ended, class-AB audio amplifiers in a Clipwatt15 package and can operate as a stereo pair or as four independent amplifier channels. Its headline specifications are four integrated amplifier channels, 10 W per channel, and an 8 V to 22 V supply range. Each amplifier includes integrated short-circuit protection, thermal protection, and diagnostic functions. Two amplifiers can be paired for applications requiring higher power output. The STA540SAN belongs to the power-amplifier IC hierarchy, where an audio amplifier drives loudspeakers or other low-impedance loads while providing voltage gain and output-current capability. Class-AB operation provides a practical balance between conduction efficiency and low crossover distortion for conventional consumer and industrial audio systems. The single-ended amplifier architecture is suitable for compact designs where a bridge-tied configuration, external bootstrap capacitors, or Boucherot cells are not required. Key features include four single-ended outputs, a 2-channel stereo or 4-channel quad operating mode, integrated short-circuit and thermal protection, diagnostic functions, and a reduced external-component count. The manufacturer datasheet states that no bootstrap capacitors or Boucherot cells are required. The Clipwatt15 package is intended for through-hole or board-level audio power designs and provides a practical thermal and assembly solution for amplifiers operating near the device's rated output capability. The STA540SAN is suitable for stereo receivers, compact audio systems, television or monitor amplification, multimedia speakers, industrial audio equipment, and other applications using 4-ohm or 8-ohm speakers. When selecting the supply voltage, ensure that the amplifier has sufficient headroom for the chosen load and that the PCB provides adequate copper area and thermal dissipation. The standby control and diagnostic functions should be checked against the system-level requirements before production design. This product page combines the verified manufacturer and distributor information with practical selection guidance, pricing-status notes, and conservative drop-in replacement analysis. It identifies where a same-package replacement is supported by the available cross-reference data and where pinout and electrical verification remains essential.
STA575 - 100W Stereo BASH Power Amplifier | STMicroelectronics
The STMicroelectronics STA575 is a 100+100 W stereo BASH power amplifier designed for use with the STABP01 digital processor. It delivers 80+80 W into 4 or 8 ohm loads at 0.5% total harmonic distortion and is available in the 27-Flexiwatt vertical power package. The device uses a mono-chip bridge stereo amplifier architecture with high-dynamic preamplifier input stages, external programmable feedback, compressors, and AC-coupled inputs. The STA575 is an integrated audio power module within the broader amplifier IC, audio amplifier, and Class AB amplifier hierarchy. Class AB amplifiers combine transistor conduction for improved linearity with lower distortion than many switching audio power stages. In the BASH architecture, the STABP01 supplies digital control and signal-processing functions while the STA575 provides the high-power analog output stage and speaker drive capability. Key features include 100+100 W output power into 4 or 8 ohms at 10% THD, 80+80 W output power at 0.5% THD, stereo operation, high-dynamic preamplifier inputs, external programmable feedback, integrated compressor functions, and AC-coupled input coupling. The 27-pin Flexiwatt vertical package is intended for audio power amplifier designs requiring substantial output current and thermal management. The device is intended for stereo speaker systems, compact hi-fi equipment, multimedia enclosures, powered speakers, and other Class AB audio products. The manufacturer datasheet identifies the BASH architecture and the electrical operating limits that determine speaker impedance, supply voltage, thermal design, and distortion performance. Designers should use the complete datasheet for pin assignment, recommended application circuitry, protection requirements, and maximum ratings. Because this is a high-power analog module, PCB layout and heat sinking are as important as signal selection. Keep high-current speaker paths short and wide, use the recommended input and feedback networks, decouple the supply rails close to the device, and validate thermal performance at the intended output power. A nominal 100 W rating does not eliminate the need for an adequate copper area, thermal interface, enclosure airflow, or speaker-load verification. This page combines the verified STMicroelectronics and distributor descriptions with practical engineering guidance. It is intended to help engineers identify the correct function, package, power class, datasheet, and design constraints while avoiding unsupported substitute claims or fabricated electrical details.
TAS5122DCA - 50W Stereo Class-D Power Stage | TI
Texas Instruments TAS5122DCA is a 50 W stereo PWM-input Class-D audio power amplifier with a 0 V to 25.5 V supply range, housed in a 56-pin HTSSOP DCA package. The integrated stereo output stage is designed to drive 6-ohm speakers at up to 30 W per channel while accepting PWM signals from a compatible digital audio processor. A Class-D audio power amplifier is an efficient switching amplifier that uses pulse-width-modulated signals to drive a passive loudspeaker through a demodulation filter. The TAS5122DCA belongs to the digital audio amplifier hierarchy: Class-D amplifier, integrated stereo power stage, audio amplifier IC, and power-management semiconductor. Unlike an analog input amplifier, it does not directly accept a conventional audio waveform; it requires PWM-compatible digital audio signaling. Key features include two-channel stereo operation, a 50 W stereo power rating, PWM signal compatibility, and TI PurePath Digital technology. The device is intended for use with a TAS50XX-family digital audio PWM processor and a passive output filter. Its DC-coupled speaker output architecture supports efficient conversion of digital audio power into analog speaker drive without requiring a traditional analog power-output stage. The architecture separates digital signal generation from analog power amplification. A compatible audio processor generates the PWM waveform, while the TAS5122DCA performs the high-current switching function and drives the speaker network. This division allows system designers to use a digital signal-processing path for decoding, volume control, channel mixing, and protection while retaining efficient Class-D output-stage behavior. Typical applications include DVD receivers, home-theater systems, mini and micro component systems, and internet music appliances. These products benefit from compact digital audio processing, efficient speaker drive, and a direct connection between a PWM audio processor and the integrated stereo power stage. A passive LC demodulation filter is used between the amplifier outputs and the loudspeakers to recover the audio waveform. Power-supply design must accommodate the amplifier's stated 0 V to 25.5 V supply range and provide sufficient current for the intended speaker load. The HTSSOP package includes a thermal pad for heat dissipation, making copper-area and thermal via placement important on multilayer printed circuit boards. Stable operation also depends on correct output-filter selection and proper decoupling of the power rails. This page combines the manufacturer's device description, package and application details, drop-in alternatives, comparison information, and practical layout guidance. It helps engineers identify the TAS5122DCA for efficient digital speaker amplification while separating known device characteristics from parameters that require confirmation against the latest manufacturer documentation.
TAS5122DCAR - 50W Stereo Class-D Power Stage | TI (Tape & Reel)
Texas Instruments TAS5122DCAR is a 50 W stereo PWM-input Class-D audio power amplifier with a 0 V to 25.5 V supply range, housed in a 56-pin HTSSOP DCA package. The integrated stereo output stage is designed to drive 6-ohm speakers at up to 30 W per channel while accepting PWM signals from a compatible digital audio processor. A Class-D audio power amplifier is an efficient switching amplifier that uses pulse-width-modulated signals to drive a passive loudspeaker through a demodulation filter. The TAS5122DCAR belongs to the digital audio amplifier hierarchy: Class-D amplifier, integrated stereo power stage, audio amplifier IC, and power-management semiconductor. Unlike an analog input amplifier, it does not directly accept a conventional audio waveform; it requires PWM-compatible digital audio signaling. Key features include two-channel stereo operation, a 50 W stereo power rating, PWM signal compatibility, and TI PurePath Digital technology. The device is intended for use with a TAS50XX-family digital audio PWM processor and a passive output filter. Its DC-coupled speaker output architecture supports efficient conversion of digital audio power into analog speaker drive without requiring a traditional analog power-output stage. The architecture separates digital signal generation from analog power amplification. A compatible audio processor generates the PWM waveform, while the TAS5122DCAR performs the high-current switching function and drives the speaker network. This division allows system designers to use a digital signal-processing path for decoding, volume control, channel mixing, and protection while retaining efficient Class-D output-stage behavior. Typical applications include DVD receivers, home-theater systems, mini and micro component systems, and internet music appliances. These products benefit from compact digital audio processing, efficient speaker drive, and a direct connection between a PWM audio processor and the integrated stereo power stage. A passive LC demodulation filter is used between the amplifier outputs and the loudspeakers to recover the audio waveform. Power-supply design must accommodate the amplifier's stated 0 V to 25.5 V supply range and provide sufficient current for the intended speaker load. The HTSSOP package includes a thermal pad for heat dissipation, making copper-area and thermal via placement important on multilayer printed circuit boards. Stable operation also depends on correct output-filter selection and proper decoupling of the power rails. This page combines the manufacturer's device description, package and application details, drop-in alternatives, comparison information, and practical layout guidance. It helps engineers identify the TAS5122DCAR for efficient digital speaker amplification while separating known device characteristics from parameters that require confirmation against the latest manufacturer documentation.
TAS5182DCAR - 100W Stereo Class-D Controller | Texas Instruments
Texas Instruments TAS5182DCAR is a two-channel Class-D digital amplifier power-stage controller designed to deliver up to 100 W per channel at 6 ohms. It uses digital inputs and controls external discrete bridge-tied-load MOSFET stages, and is packaged in a 56-pin HTSSOP with an exposed pad. The device includes short-circuit and thermal protection along with shutdown control. A Class-D digital amplifier power-stage controller is an integrated signal-processing and gate-control device used in high-power audio systems. Unlike a conventional analog audio amplifier, it does not directly supply the speaker current. Instead, it accepts digital audio information and drives external MOSFET output transistors in a bridge-tied-load arrangement. This controller sits within the broader Class-D amplifier, audio amplifier, integrated-circuit, and power-management hierarchy. The TAS5182DCAR provides two stereo processing channels and supports an output configuration rated at 100 W × 2 into 6 ohms. Digital inputs suit digital audio sources and digital-to-analog conversion systems, while external MOSFETs allow the power stage to be scaled for the required speaker impedance and output power. Short-circuit and thermal protection functions help the system manage abnormal operating conditions. The controller incorporates Texas Instruments PurePath technology and is intended to work with discrete bridge-tied-load MOSFET output stages. Its digital control architecture helps reduce the number of external signal-chain components needed around the power stage. The exposed thermal pad provides a direct heat-dissipation path from the controller, although system-level thermal design must also account for the external MOSFETs and their dissipation. Typical uses include stereo hi-fi audio receivers, powered speakers, home-theater amplifiers, professional audio equipment, and automotive-style multi-zone audio systems. The two-channel architecture allows one controller to manage left and right speaker channels. Designers select external MOSFETs according to rail voltage, output power, switching performance, thermal resistance, and the impedance of the intended speaker network. PCB layout is critical because high-current MOSFET gates and sensitive digital control signals must be separated. Keep input and power-stage routing compact, provide the datasheet-required local decoupling, connect the exposed pad to the appropriate thermal copper area, and verify gate resistance, dead time, and power-device stability against the reference design. The device is listed as obsolete, so lifecycle planning should account for a qualified redesign path. This product page combines the confirmed 100 W × 2 Class-D capability, 56-pin HTSSOP construction, protection features, lifecycle status, and verified sourcing references with practical guidance for power-stage layout, thermal management, and obsolete-product replacement planning.
TAS5342LDDV - 100W Stereo Class D Power Stage | TI
The Texas Instruments TAS5342LDDV is an integrated stereo Class D digital amplifier power stage rated for up to 100 W per channel into a 4-ohm bridge-tied load, housed in a 44-pin HTSSOP package. It combines Class D efficiency with low harmonic distortion, low integrated noise, and low idle current, making it suitable for compact high-power audio systems. The device supports mono or stereo operation and includes an integrated fault-protection system. A Class D audio power stage is a switching amplifier topology that controls current through the speaker load with substantially less conduction loss than a conventional linear amplifier. The TAS5342L belongs to the broader digital power-amplifier hierarchy: Class D power stage, audio amplifier IC, power-management semiconductor, and surface-mount integrated circuit. Its 100 W per-channel capability makes it relevant to powered speakers, soundbars, automotive audio systems, and compact home-theater equipment. The manufacturer describes the TAS5342 as a high-performance stereo digital amplifier power stage intended for 4-ohm bridge-tied loads. Key benefits include up to 100 W output per channel, low harmonic distortion, low integrated noise, and low idle current. Its integrated protection system is designed to safeguard the amplifier and connected system against multiple fault conditions. These characteristics make it useful where audible artifacts, amplifier efficiency, and speaker compatibility are more important than the simplicity of a linear output stage. As a digital power stage, the TAS5342 requires an external audio input, control logic, power-supply infrastructure, output filtering, and a correctly designed PCB. The 44-HTSSOP package presents a substantial thermal and routing task because a Class D stage must dissipate losses associated with output switching and resistive load operation. Layout quality, inductor selection, output-filter design, thermal management, and supply decoupling directly affect sound quality, EMI, and reliability. Typical uses include powered bookshelf speakers, multimedia speakers, soundbar amplification, automotive audio head units, and other compact stereo or mono systems. The device can operate as a two-channel bridge-tied amplifier or as a one-channel mono amplifier. Mono use can increase the power available to a single load, but the power-conversion and thermal limits specified by Texas Instruments must still be followed. PCB implementation requires careful treatment of the high-current Class D outputs. Power and ground paths should be short and wide, switching nodes should remain compact, and the analog and digital input sections should be separated from output-current paths. The output inductors and filter capacitors should be placed according to the manufacturer reference design, with thermal vias and copper areas used to spread heat from the power stage. This product page combines the verified device identity, official manufacturer documentation, package information, application context, comparison parameters, and practical implementation guidance. It is structured to help engineers determine whether the TAS5342LDDV matches the required output power, package, topology, and board-space constraints before beginning a speaker-amplifier design.
TAS5622ADDV - 125W Stereo Class-D Amplifier | Texas Instruments
Texas Instruments TAS5622ADDV is a 125 W stereo and 250 W mono PurePath HD Class-D audio power stage with a PWM input, 12 V to 34 V supply range, and a thermally enhanced 44-pin HTSSOP (DDV) package. The device integrates high-side and low-side switching stages, differential inputs, digital audio control, and protection functions in one surface-mount power amplifier. A Class-D audio amplifier is a switching power amplifier that uses pulse-width-modulated drive signals to transfer energy to a loudspeaker load. It belongs to the audio amplifier hierarchy, which includes linear and nonlinear amplifier implementations. Compared with a conventional linear output stage, an efficient Class-D architecture can reduce heat in the output path while supporting high output power in a compact package. The TAS5622A family provides 125 W stereo output and 250 W mono operation from a 12 V to 34 V supply. Its PWM input supports digital audio signal chains, while the integrated thermal enhancement and large MOSFET output devices are intended to improve efficiency and reduce losses. The 44-pin HTSSOP package also provides a low-inductance power stage with an exposed thermal pad for board-level heat removal. Key operating features include automatic mute and a no-noise switch, differential input support, and integrated switching outputs. The device can operate as either a stereo amplifier or a mono bridge-tied amplifier. Its operating-temperature range is -40 °C to 125 °C, making it suitable for industrial, consumer, and automotive-adjacent audio equipment when the complete system meets its applicable qualification requirements. Typical uses include powered speakers, soundbars, active subwoofers, compact home-theater systems, professional audio equipment, and industrial audio announcement products. A digital-audio processor can feed the PWM input directly, simplifying the signal path in designs that use the PurePath HD architecture. Thermal management and power-supply layout are the main implementation constraints. Follow the manufacturer reference schematic and PCB layout, place output-filter and supply capacitors according to the datasheet, and provide copper area and thermal vias beneath the exposed pad. The package design does not eliminate the need to verify enclosure temperature, loudspeaker load behavior, and supply ripple under sustained full-power operation. This product record combines the exact ordering information, package designation, power ratings, voltage range, and product-family description with practical guidance for thermal design, signal integration, sourcing, and drop-in replacement evaluation.
TAS5631PHD - 300W Stereo Class-D Amplifier | Texas Instruments
Texas Instruments TAS5631PHD is a PWM-input Class-D audio power amplifier with integrated closed-loop feedback, rated for up to 300 W stereo output into 4 Ω to 8 Ω speakers from a single 50 V supply. It supports mono or stereo operation and is housed in a 64-pin HTQFP package measuring 14 mm by 14 mm. The device uses PurePath HD feedback technology to combine Class-D efficiency with low total harmonic distortion. A Class-D audio amplifier is a switching power stage in which the output transistor conducts only part of each signal cycle. This architecture belongs to the amplifier-IC hierarchy, where a Class-D amplifier converts a PWM command signal into a high-current speaker output. Compared with a conventional linear Class-AB output stage, the TAS5631PHD reduces power dissipation when driving high-power loudspeakers, while its integrated feedback is intended to preserve low distortion under real load conditions. The principal features of the TAS5631PHD are its 300 W stereo capability, support for 4 Ω to 8 Ω speaker loads, 50 V supply operation, differential or single-ended input operation, and integrated PurePath HD feedback. The manufacturer states that PurePath HD can achieve total harmonic distortion below 0.03% while retaining the efficiency benefits of Class-D operation. These characteristics make the device suitable for high-power stereo audio, active speakers, home-theater amplification, professional audio systems, and powered subwoovers when the application can use a 50 V amplifier supply. TAS5631PHD receives a PWM command signal rather than an analog audio waveform. A system-level audio processor must therefore generate the required PWM format before the amplifier drives the loudspeakers. The integrated feedback network provides closed-loop output control, but the external power stage, supply network, output filtering, speaker connections, thermal management, and protection implementation still require careful engineering for a reliable 300 W design. Typical deployments include powered stereo speakers, multimedia speaker systems, active subwoofers, home-theater power amplifiers, and commercial audio installations. The 300 W rating describes the maximum stereo capability under specified test conditions, not a guarantee that every speaker, enclosure, supply, board layout, or thermal design can safely sustain that output. Impedance, channel configuration, thermal limits, supply capability, and signal-processing requirements determine the practical operating envelope. Designers should follow the manufacturer datasheet for pin assignments, bootstrap-capacitor values, input filtering, output filtering, power-supply layout, and thermal implementation. The exposed thermal pad must be connected to the recommended thermal plane, and the high-current output paths require very low-inductance routing. This page combines the confirmed device characteristics, application guidance, and substitution constraints into an engineering-focused overview of the TAS5631PHD.
TAS5631PHDR - 300W Stereo Class-D Amplifier | Texas Instruments (Tape & Reel)
Texas Instruments TAS5631PHDR is a PWM-input Class-D audio power amplifier with integrated closed-loop feedback, rated for up to 300 W stereo output into 4 Ω to 8 Ω speakers from a single 50 V supply. It supports mono or stereo operation and is housed in a 64-pin HTQFP package measuring 14 mm by 14 mm. The device uses PurePath HD feedback technology to combine Class-D efficiency with low total harmonic distortion. A Class-D audio amplifier is a switching power stage in which the output transistor conducts only part of each signal cycle. This architecture belongs to the amplifier-IC hierarchy, where a Class-D amplifier converts a PWM command signal into a high-current speaker output. Compared with a conventional linear Class-AB output stage, the TAS5631PHDR reduces power dissipation when driving high-power loudspeakers, while its integrated feedback is intended to preserve low distortion under real load conditions. The principal features of the TAS5631PHDR are its 300 W stereo capability, support for 4 Ω to 8 Ω speaker loads, 50 V supply operation, differential or single-ended input operation, and integrated PurePath HD feedback. The manufacturer states that PurePath HD can achieve total harmonic distortion below 0.03% while retaining the efficiency benefits of Class-D operation. These characteristics make the device suitable for high-power stereo audio, active speakers, home-theater amplification, professional audio systems, and powered subwoovers when the application can use a 50 V amplifier supply. TAS5631PHDR receives a PWM command signal rather than an analog audio waveform. A system-level audio processor must therefore generate the required PWM format before the amplifier drives the loudspeakers. The integrated feedback network provides closed-loop output control, but the external power stage, supply network, output filtering, speaker connections, thermal management, and protection implementation still require careful engineering for a reliable 300 W design. Typical deployments include powered stereo speakers, multimedia speaker systems, active subwoofers, home-theater power amplifiers, and commercial audio installations. The 300 W rating describes the maximum stereo capability under specified test conditions, not a guarantee that every speaker, enclosure, supply, board layout, or thermal design can safely sustain that output. Impedance, channel configuration, thermal limits, supply capability, and signal-processing requirements determine the practical operating envelope. Designers should follow the manufacturer datasheet for pin assignments, bootstrap-capacitor values, input filtering, output filtering, power-supply layout, and thermal implementation. The exposed thermal pad must be connected to the recommended thermal plane, and the high-current output paths require very low-inductance routing. This page combines the confirmed device characteristics, application guidance, and substitution constraints into an engineering-focused overview of the TAS5631PHDR.