بەرهەمەکان (8,400+)

A3P250L-1VQG100I - 250K Gate ProASIC3L FPGA | Microchip
A3P250L-1VQG100I

A3P250L-1VQG100I - 250K Gate ProASIC3L FPGA | Microchip

The Microchip Technology A3P250L-1VQG100I is a low-power flash-based Field Programmable Gate Array (FPGA) from the ProASIC3L family, offering 250,000 system gates, 6,144 logic elements, and 68 user I/Os in a 100-pin VQFP package. It operates at a core voltage of 1.2V and supports system performance up to 892.86 MHz, making it suitable for a wide range of low-power, high-reliability applications. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement custom digital logic functions. Unlike microcontrollers, FPGAs provide massive parallel processing capabilities and are reprogrammable, allowing designers to iterate on hardware designs without fabricating new chips. The ProASIC3L family is a flash-based FPGA, meaning configuration is stored in non-volatile flash memory, providing instant-on operation and inherent security against reverse engineering. Key features of the A3P250L-1VQG100I include Flash*Freeze technology, which enables ultra-low power consumption in standby mode while preserving register states, and a low-power 1.2V core that reduces dynamic power. The device also offers 68 user I/Os, 36,864 bits of RAM, and support for multiple I/O standards including LVCMOS, LVTTL, and PCI. Its 130nm process technology balances performance and power efficiency, making it ideal for battery-powered and thermally constrained designs. Technically, the ProASIC3L architecture uses a flash-based switch matrix that eliminates the need for external configuration memory, reducing system cost and board space. The device supports in-system programming (ISP) and can be reprogrammed up to 500 times, providing flexibility for design updates. The 100-pin VQFP package has a 0.5mm pitch and is lead-free, complying with RoHS standards. Typical applications include industrial control systems, medical devices, automotive electronics, and communication infrastructure. The low-power characteristics make it particularly suitable for portable and battery-operated equipment where energy efficiency is critical. The 68 I/Os can interface with sensors, ADCs, and communication interfaces, enabling system integration. When designing with this FPGA, consider the 1.2V core supply requirement and ensure adequate decoupling capacitors are placed near the power pins. The Flash*Freeze mode can be used to reduce power consumption during idle periods, but careful attention must be paid to clock management and I/O state retention. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P250L-1VQG100I.

RFQ پەیوەندی
A3P250L-FG144 - 250K Low-Power FPGA | Microchip | Industrial Control
A3P250L-FG144

A3P250L-FG144 - 250K Low-Power FPGA | Microchip | Industrial Control

The Microchip Technology A3P250L-FG144 is a ProASIC3L low-power field-programmable gate array with 97 I/O, 36,864 logic elements, and a 144-LBGA package. It is designed for compact embedded systems that require reconfigurable logic, flexible I/O, and nonvolatile FPGA configuration in an industrial control-oriented package. A field-programmable gate array is a semiconductor whose digital logic is configured after fabrication. FPGAs occupy the hierarchy between fixed-function logic ICs and programmable processors. The ProASIC3L family combines flash-based, nonvolatile configuration with customizable logic and I/O. This makes it useful when a product needs hardware updates, multiple interface variations, or logic consolidation without changing the printed circuit board. The defining feature of the A3P250L-FG144 is its low-power ProASIC3L implementation. It provides the same 250K-class logic density and 97-I/O interface count as the ProASIC3 family while targeting lower static and dynamic power characteristics. The device combines 36,864 logic elements with a 144-LBGA package, allowing dense control logic, peripheral interfaces, and signal processing blocks to be integrated into one component. ProASIC3 devices support reprogramming and are commonly used where field updates, configuration storage, and design flexibility are important. Compared with a mask-programmed ASIC, an FPGA shortens the path between design revisions and production because the same physical package can support different logic configurations. Compared with a processor-based implementation, dedicated FPGA logic can execute interface, decode, filtering, and control tasks concurrently with predictable hardware timing. Typical applications include industrial automation, communications equipment, test and measurement systems, embedded control, interface bridging, and signal processing. The 97 available I/O make the part suitable for systems combining multiple digital buses, serial links, control outputs, and status inputs. In each case, the design must provide the required configuration memory, clocking, decoupling, programming access, and a power architecture appropriate for the selected speed and temperature grade. A key design consideration is that the L designation identifies a low-power family variant, while ordering suffixes identify speed, temperature, and packaging options. PCB and system designers should therefore treat the complete MPN as the ordering identity rather than selecting only by the base ProASIC3 family name. Validate the selected ordering code against the Microchip datasheet, pin table, footprint, and power requirements before releasing the PCB. This page consolidates the verified device identity, package and I/O characteristics, drop-in alternatives that can be substantiated, comparison fields, and application-oriented design guidance. It also distinguishes documented facts from parameters that must be confirmed directly in the manufacturer datasheet, helping engineers shorten component selection and PCB review.

RFQ پەیوەندی
A3P250L-FG256 - 250K Gate ProASIC3L FPGA | Microchip
A3P250L-FG256

A3P250L-FG256 - 250K Gate ProASIC3L FPGA | Microchip

The Microchip A3P250L-FG256 is a ProASIC3L field-programmable gate array with 250,000 logic gates, 157 programmable I/O, and 36,864 bits of embedded RAM in a 256-LBGA package. The device operates from a 1.2 V core supply and is associated with a maximum operating frequency of 781.25 MHz, making it suitable for compact, reprogrammable control and interface logic. A field-programmable gate array is a programmable semiconductor that combines configurable logic, programmable I/O, and embedded memory on one die. An FPGA belongs to the broader semiconductor hierarchy and offers a shorter development cycle than a custom ASIC because its configuration can be changed during design, prototyping, or field updates. The ProASIC3L family is positioned for low-density designs requiring deterministic control logic, protocol bridging, peripheral integration, and general-purpose programmable logic. The A3P250L-FG256 provides 157 I/O and 36,864 RAM bits in a 256-LBGA package, giving a compact board footprint with extensive programmable connectivity. Its stated 250,000-gate capacity supports parallel datapaths, state machines, interface logic, and embedded protocol functions. The 130 nm fabrication technology provides a practical balance between logic density, programmable nonvolatile configuration, power consumption, and cost for embedded control applications. The ProASIC3L architecture supports configuration of logic, I/O standards, and programmable resources through the vendor's development environment. Because configuration data is stored in the device, the FPGA can retain its programmed behavior without continuous external memory access. Engineers must still account for startup configuration time, I/O drive limits, clock topology, bank voltage constraints, and the maximum operating frequency when assigning logic and routing high-speed interfaces. Typical applications include industrial control, communications infrastructure, instrumentation, embedded networking, and aerospace or defense equipment. The 157 available I/O are useful for connecting external memories, transceivers, sensors, and parallel processors, while the on-chip RAM can accelerate counters, packet buffers, status registers, and small lookup or arithmetic functions. A critical design consideration is package and power planning. A 256-LBGA device requires fine-pitch PCB routing, adequate thermal spreading, and strict decoupling around its 1.2 V core supply. Signal-integrity and clock-budget calculations should be performed before committing to a system-level clock rate, because routing congestion and external memory interfaces can reduce practical performance. This page organizes the A3P250L-FG256 package, resource, application, and replacement information into an engineering-focused reference. It also highlights which migration choices retain the 256-ball footprint and where package, grade, speed, or device-family differences require additional verification before redesign.

RFQ پەیوەندی
A3P250L-PQ208 - 250K Gate 1.2V ProASIC3L FPGA | Microchip
A3P250L-PQ208

A3P250L-PQ208 - 250K Gate 1.2V ProASIC3L FPGA | Microchip

The Microchip A3P250L-PQ208 is a ProASIC3L field-programmable gate array with 250,000 effective gates, 6,144 logic cells, 36,864 bits of embedded RAM, and 151 programmable I/O pins. It operates from a 1.2 V core supply and is packaged in a 208-pin BFQFP plastic quad flat package for surface-mount PCB assembly. The A3P250L-PQ208 is intended for designs requiring a compact, reprogrammable logic solution rather than a fixed-function application-specific integrated circuit. A ProASIC3L FPGA is an FPGA in the ProASIC3L family of programmable logic devices. FPGAs combine configurable logic cells, programmable interconnect, embedded RAM, and user I/O in a single semiconductor package. This places the device within the broader hierarchy of programmable logic devices, digital semiconductors, and embedded control systems. Unlike a mask-programmed custom ASIC, an FPGA can be reconfigured during development, prototyping, or production programming cycles. The A3P250L provides 151 programmable input/output pins and 36,864 bits of RAM, giving a design engineer substantial interface bandwidth for parallel data acquisition, control, communications, and industrial automation. Its stated maximum clock frequency is 781.25 MHz according to the product listing information, although the achievable system clock depends on the selected device speed grade, logic design, I/O timing constraints, clocking topology, and PCB implementation. The 130 nm CMOS process technology supports integration of the programmable logic and embedded memory resources in a single 208-pin package. Typical applications include industrial control systems, test and measurement equipment, communications interfaces, embedded signal-processing front ends, and general-purpose digital prototyping. The 151 I/O count is particularly useful when a design must retain many parallel pins rather than relying on a low-pin-count serial interface. Engineers should use the manufacturer datasheet and device programming documentation to confirm speed-grade behavior, supported clock configurations, I/O standards, and configuration requirements before releasing a production PCB. The A3P250L-PQ208 should be used when 250K effective gates, 36,864 RAM bits, and 151 user I/O in a BFQFP-208 footprint are a better fit than a smaller programmable device. Its 1.2 V operating supply and 130 nm CMOS implementation make it suitable for compact embedded logic designs, while the large I/O count simplifies parallel bus integration. The package and device configuration still require careful power planning, signal-integrity review, and programming-tool verification. This product page combines the verified device identity and package information with practical FPGA design guidance, pin-package considerations, and a focused comparison of closely related A3P250L configurations. The 208-pin package is not represented by a dedicated canonical package illustration key in the available library, so the package view uses the generic default representation rather than implying an inaccurate footprint drawing.

RFQ پەیوەندی
A3P250L-VQ100 - 250K-Gate Low-Power FPGA | Microchip
A3P250L-VQ100

A3P250L-VQ100 - 250K-Gate Low-Power FPGA | Microchip

The Microchip A3P250L-VQ100 is a low-power, non-volatile ProASIC3L field-programmable gate array with approximately 250,000 logic gates, 68 I/O pins, and a 100-pin TQFP package. It is manufactured using 130 nm CMOS technology, supports a 1.2 V core supply, and is listed with a 781.25 MHz performance figure. An FPGA is a programmable digital semiconductor used to implement logic functions in parallel on one integrated circuit. A device in the ProASIC3L family belongs to the broader hierarchy of programmable logic devices, where it sits between mask-programmable custom logic and higher-density FPGA and CPLD families. Its flash configuration technology retains the programmed logic after power is removed, allowing the same device to be reprogrammed during development or field updates without replacing the package. The A3P250L-VQ100 provides 68 I/O in a 100-pin TQFP package, offering a relatively compact surface-mount option for embedded control, interface bridging, signal processing, and general-purpose programmable logic. Its low-power design distinguishes it from the related A3P250 device, while the -VQ100 ordering code identifies the specified package and standard configuration variant. The listed 1.2 V core technology also makes board-level power sequencing and I/O compatibility important design considerations. Based on the manufacturer’s product information for the ProASIC3 family, ProASIC3 devices emphasize reprogrammability, low total cost of ownership, small-footprint packages, and integrated system features. The A3P250L designation specifically identifies the low-power branch of that family. Exact operating-temperature ratings, configuration-memory organization, I/O standards, and AC timing limits for this ordering code should be confirmed in the ProASIC3L family documentation before a production design is released. Typical applications include industrial control logic, instrumentation, communications-interface adapters, embedded system bridges, and low-power embedded controllers. The 68-I/O count is useful for designs that need moderate parallel connectivity without moving to a larger package. Designers should account for the available configuration pins, programming interface, decoupling, unused I/O behavior, and system-level voltage compatibility when defining the board footprint. A robust power layout should provide stable core and I/O supplies while keeping high-current return paths away from sensitive configuration and programmable-logic resources. PCB signal-integrity analysis is particularly important when external buses or memories operate at the upper supported clock rates, since package transitions, trace impedance, and loading can affect timing margin. This product record combines package and device details with practical programming, replacement, sourcing, and design guidance. It also distinguishes genuine same-footprint alternatives from parts that would require package or board changes, helping engineers evaluate migration paths without confusing electrical equivalence with mechanical compatibility.

RFQ پەیوەندی
A3P250L-VQ100I - 250K-Gate Low-Power FPGA, 68 I/O | Microsemi
A3P250L-VQ100I

A3P250L-VQ100I - 250K-Gate Low-Power FPGA, 68 I/O | Microsemi

The Microsemi (Microchip) A3P250L-VQ100I is a ProASIC3L low-power flash FPGA delivering 250,000 system gates, 36,864 bits of embedded RAM, and up to 68 user I/O in a 100-pin VQFP (TQFP-100) surface-mount package. It operates from a 1.14V to 1.575V core supply across a -40C to +100C industrial junction temperature range. An FPGA (Field-Programmable Gate Array) is a reprogrammable semiconductor device that implements digital logic through configurable logic blocks, routing fabric, and I/O cells. Within the programmable logic hierarchy, the ProASIC3L family sits in the low-density, low-power class of flash-based FPGAs, distinct from SRAM-based FPGAs because configuration is stored in on-chip flash cells rather than external boot memory. Key features include nonvolatile flash programming (single-chip solution, no external configuration PROM), Flash*Freeze technology that cuts static power dramatically while retaining SRAM state and instant wake-up, and secure FPGA bitstream storage. The L suffix denotes the low-power 1.2V-core variant of the ProASIC3 architecture on a 130nm flash process, reducing static and dynamic power versus the standard A3P250. The ProASIC3L fabric combines VersaTiles (fine-grained logic tiles), embedded 4,608-bit Block RAM modules, and I/O banks supporting multiple voltage standards. Timing closure is simplified by a deterministic flash-based routing architecture, and the fabric supports clocks into the hundreds of megahertz range per family characterization. Typical applications include industrial control and automation, portable and battery-powered instruments, secure embedded controllers, bridge logic and glue logic consolidation, and space- or power-constrained systems where instant-on operation and configuration security matter. A key design consideration is I/O banking: assign I/O standards per bank to avoid voltage conflicts, and budget the 1.2V core rail and auxiliary 2.5V/3.3V supplies separately. Flash*Freeze mode requires attention to I/O state retention rules in the datasheet. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
A3P250L-VQG100I - ProASIC3L Flash FPGA 250K Gates | Microsemi
A3P250L-VQG100I

A3P250L-VQG100I - ProASIC3L Flash FPGA 250K Gates | Microsemi

The Microsemi (Microchip) A3P250L-VQG100I is a ProASIC3L family flash-based FPGA with 250,000 system gates, 68 user I/O pins, and 36,864 bits of embedded RAM, housed in a 100-pin VQFP/TQFP surface-mount package with industrial temperature rating (-40C to +100C) and a 1.2V low-power core. A field programmable gate array (FPGA) is a semiconductor device containing a matrix of configurable logic blocks (CLBs) interconnected by programmable fabric, allowing designers to implement custom digital circuits after manufacturing. Within the programmable logic hierarchy, the FPGA sits above CPLDs in density and capability, and flash-based FPGAs such as the ProASIC3L family additionally offer non-volatile configuration, removing the external configuration flash required by SRAM-based FPGAs and enabling true single-chip, secure, instant-on designs. Key differentiating features include the low-power 'L' variant core operating at 1.2V for reduced dynamic and static power, built-in flash configuration storage (106,000+ programming cycles typical for the family), support for soft ARM processor cores, and 130nm flash technology that provides live-at-power-up operation without boot time. The device provides 68 flexible I/Os supporting multiple single-ended and differential standards. Architecturally, ProASIC3L uses a sea-of-gates fabric of VersaTiles - fine-grained logic tiles each containing a lookup table and register - plus embedded Block RAM for buffering and FIFO functions. Chip-level features include on-chip oscillators for clocking flexibility, PLL support via family clock conditioning resources, and FlashLock security locking the design against readback. Typical applications include industrial automation control, portable and battery-powered instrumentation benefiting from the 1.2V core, bridge logic and glue logic consolidation, motor control interfaces, and secure embedded controllers where instant-on and tamper resistance matter. Design considerations: plan I/O banking and voltage standards early, since the 68 available I/Os on the VQFP-100 footprint must satisfy both signal and power budgets; use Microchip Libero SoC for synthesis and place-and-route. This page adds value beyond the manufacturer datasheet by compiling verified distributor data, same-package drop-in alternatives, a parameter comparison table, and practical design notes in one citable reference.

RFQ پەیوەندی
A3P400-1FG144 - 400K-Gate ProASIC3 FPGA | Microchip
A3P400-1FG144

A3P400-1FG144 - 400K-Gate ProASIC3 FPGA | Microchip

Microchip Technology A3P400-1FG144 is a ProASIC3 flash-based field-programmable gate array with 400,000 system gates, 5,120 logic elements, 97 user I/Os, and 54 Kb of block RAM in a 144-ball FBGA package. The device uses a 130 nm flash-based CMOS process and supports live configuration at power-up, allowing the FPGA to operate without an external configuration controller after programming. An FPGA is a programmable semiconductor whose logic, routing, memory, and I/O resources can be configured after manufacture to implement digital systems. Within the product hierarchy, the A3P400 is a low-density FPGA, a programmable-logic device within the broader semiconductor category. Its nonvolatile flash configuration retains the programmed design when power is removed, making it suitable for control, interface, data acquisition, and embedded system functions. The ProASIC3 family combines reprogrammability with dedicated block RAM and configurable I/O. The A3P400-1FG144 provides 300 user I/Os at the family level, up to 144 Kbits of true dual-port SRAM, and up to 1 M system gates across the ProASIC3 family. Device-specific features include four I/O banks, allowing compatible voltage standards to be assigned within the appropriate supply domains. Speed grade 1 and commercial temperature options support cost-sensitive designs requiring broad operating conditions. Its 130 nm, seven-layer-metal flash-based CMOS process provides nonvolatile configuration and live-at-power-up operation. The architecture supports 54 Kb of block RAM for buffering, packet handling, control state, and general-purpose storage. Four I/O banks provide dedicated supply structures, so assignments must respect the voltage capabilities of each bank when planning board-level interfaces. Typical uses include industrial control, communications gateways, instrumentation, security and access systems, embedded processors, and compact data-acquisition equipment. The 144-ball FBGA package minimizes board area but requires careful escape routing, multilayer PCB construction, controlled impedance, and thermal-aware placement. The FPGA should be paired with correctly rated clock, configuration, memory, and power-supply components appropriate to the selected design. For layout, reserve the manufacturer-specified configuration pins and program the correct I/O standards before signal routing is frozen. Decoupling should follow the device power and ground recommendations, while high-speed clock and serial interfaces require short return paths. Before production, verify timing, pin assignments, power sequencing, and junction-temperature margins in the final board environment. This product guide combines the device architecture, commercial sourcing information, same-package alternatives, and practical FPGA design guidance. It helps engineers identify the correct ProASIC3 option and plan a robust PCB, power architecture, and configuration flow before releasing a design to manufacturing.

RFQ پەیوەندی
A3P400-1FG256 - 55K-Gate ProASIC3 FPGA | Microchip
A3P400-1FG256

A3P400-1FG256 - 55K-Gate ProASIC3 FPGA | Microchip

Microchip Technology A3P400-1FG256 is a ProASIC3 flash-based field-programmable gate array in a 256-LBGA package, with 178 I/O and approximately 55,296 gates. The device belongs to the A3P400 ultra-low-density FPGA family and provides reprogrammable logic in a single-chip, small-footprint solution. It is positioned for embedded control, interface bridging, signal processing, and general-purpose programmable logic applications. A field-programmable gate array is a digital semiconductor whose logic functions are configured through a programmable interconnect and configuration memory. In the broader device hierarchy, an FPGA is a programmable logic device within the broader semiconductor category. The ProASIC3 family combines configurable logic blocks with programmable interconnect and flash-based configuration, allowing a design to be changed without replacing the physical component. The A3P400-1FG256 is identified by Microchip as a ProASIC3 FPGA with 5K logic elements and 178 I/O in a 256-LBGA package. The manufacturer describes the A3P400 family as an ultra-low-density FPGA offering single-chip operation, compact packaging, reprogrammability, advanced features, and a low total cost of ownership. Its 256-ball package supports dense board integration while preserving 178 available I/O for external interfaces. The A3P400 device family includes variants identified as having 400,000 gates and 9,216 configurable logic blocks. A related A3P400-1FG256YI variant operates from 1.425 V to 1.575 V with a nominal core supply of 1.5 V. These figures establish the family's low-voltage, CMOS-oriented operating architecture, although individual production devices must be checked against their specific ordering information and datasheet limits. Typical uses include industrial control, communications interface conditioning, data acquisition, embedded protocol management, and compact embedded systems that benefit from field-reprogrammable logic. The 178 I/O count is particularly useful when a design needs numerous digital connections while using a single programmable device instead of several fixed-function logic ICs. The small 256-LBGA footprint also supports space-constrained board layouts. The principal design consideration is package and signal integrity. The 256-LBGA device requires a multilayer PCB, careful escape routing, short return paths, and adequate power and ground-plane distribution. Because the I/O count is high, designers should assign interfaces by supported voltage standard and bank before finalizing the pin plan. Use the manufacturer pin-description tables and recommended power-supply connections when assigning every ball. This page combines the device identity, package information, low-density ProASIC3 positioning, application guidance, verified comparison points, and practical PCB considerations into a concise engineering reference for designers evaluating the A3P400-1FG256.

RFQ پەیوەندی
A3P400-1PQG208I - ProASIC3 FPGA, 400K Gates | Microchip
A3P400-1PQG208I

A3P400-1PQG208I - ProASIC3 FPGA, 400K Gates | Microchip

The Microchip Technology A3P400-1PQG208I is a ProASIC3 flash-based Field Programmable Gate Array (FPGA) delivering 400,000 system gates, 55,296 bits of RAM, and 151 user I/Os in a 208-pin PQFP (PQG208) package. It operates from a 1.5 V core supply and supports a wide range of I/O standards, making it a versatile single-chip solution for cost-sensitive, mid-density logic applications. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing, typically using a hardware description language (HDL) such as Verilog or VHDL. Unlike ASICs, FPGAs offer reprogrammability and faster time-to-market. The ProASIC3 family uses nonvolatile flash technology, providing instant-on operation, low power consumption, and enhanced security compared to SRAM-based FPGAs, which require external configuration memory. The A3P400-1PQG208I features 4,500 logic elements (VersaTiles), 151 user I/Os, and 55,296 bits of embedded RAM. It supports up to 4 I/O banks with programmable voltage standards, including LVCMOS, LVTTL, PCI, and LVDS. The device also includes a PLL for clock management and supports in-system programming (ISP) via JTAG, enabling field updates. Its flash-based architecture provides inherent immunity to single-event upsets (SEU), making it suitable for mission-critical applications. This FPGA is built on a 130 nm flash process, offering a balance of density, performance, and power. The -1 speed grade provides system performance up to 350 MHz for internal logic. The device is available in a 208-pin PQFP package with a 28x28 mm body and 0.5 mm pitch, suitable for surface-mount assembly. The flash configuration is nonvolatile, so the device powers up instantly without external boot memory, reducing BOM cost and board space. Typical applications include industrial automation, motor control, communications infrastructure, and defense systems. Its low power and instant-on capability make it ideal for portable and battery-powered devices. The 151 I/Os allow flexible interfacing with sensors, ADCs, DACs, and communication transceivers. The embedded RAM can be used for FIFOs, buffers, or small lookup tables. When designing with this device, ensure proper decoupling of the 1.5 V core supply and the VCCIBx bank supplies. Use the JTAG interface for programming and boundary-scan testing. The flash-based configuration is secure and does not require external memory, but consider the I/O bank voltage requirements to avoid damage. The device supports hot-swap and power-up sequencing per the datasheet guidelines. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A3P400-1PQG208I.

RFQ پەیوەندی
A3P400-2FG144 - 97-I/O ProASIC3 FPGA | Microchip
A3P400-2FG144

A3P400-2FG144 - 97-I/O ProASIC3 FPGA | Microchip

The Microchip Technology A3P400-2FG144 is a ProASIC3 flash-based field-programmable gate array with 55,296 logic cells, 97 user I/Os, and up to 54 Kb of block RAM in a 144-LBGA package. It is manufactured on a 130 nm, seven-layer CMOS process with six copper layers and operates from a 1.5 V supply. The commercial-temperature variant is specified for 0 °C to 70 °C and is supplied in surface-mount tray packaging. A ProASIC3 FPGA is a reprogrammable logic device that combines configurable digital logic, embedded block RAM, programmable I/O, and dedicated clocking resources on a single monolithic chip. Within the semiconductor hierarchy, it belongs to the flash-programmable FPGA class rather than mask-programmable logic or application-specific standard products. This combination supports short development cycles, field reconfiguration, and low total cost of ownership for low- to medium-volume embedded systems. Key features include 97 user I/Os, 55,296 logic cells, up to 54 Kb of block RAM, single-chip implementation, and reprogrammable on-chip flash configuration memory. The -2 suffix identifies the speed grade, while FG144 identifies the 144-ball package. The family is positioned for industrial control, communications, instrumentation, consumer electronics, and embedded processing systems requiring deterministic parallel I/O and user-programmable logic. The ProASIC3 architecture uses a 130 nm flash-based CMOS process with seven metal layers and six copper layers. Programmable logic is organized into configurable cells that can implement combinational and sequential functions, while dedicated block RAM supports buffers, lookup tables, and control-plane data storage. The 97-I/O count allows substantial parallel connectivity to external processors, transceivers, displays, sensors, and industrial peripherals. Typical applications include industrial automation modules, data-acquisition systems, communication interfaces, motor-control support logic, instrument front ends, and embedded platform controllers. A 13 mm by 13 mm 144-FPBGA arrangement supports compact designs where fine-pitch routing and multilayer PCB layout are acceptable. The device is also suited to legacy-product refresh designs where an existing board can be retained while programmable logic is updated. During PCB design, place decoupling capacitors adjacent to every supply pin, route high-speed clock and differential signals on controlled-impedance layers, and follow the package ball map in the Microchip A3P400 documentation. Confirm the exact I/O standard, bank voltage, and configuration scheme for the system before release because these selections determine terminations, level shifting, and boot behavior. This page consolidates device specifications, package details, drop-in upgrade options, comparison data, and implementation guidance for engineers evaluating the A3P400-2FG144 for legacy and new flash-FPGA designs.

RFQ پەیوەندی
A3P400-2FGG144 - ProASIC3 Flash FPGA 97 I/O | Microchip
A3P400-2FGG144

A3P400-2FGG144 - ProASIC3 Flash FPGA 97 I/O | Microchip

The Microchip Technology (formerly Microsemi) A3P400-2FGG144 is a ProASIC3 flash-based FPGA with 403,000 system gates, 97 user I/Os, and 55,296 bits of embedded true dual-port SRAM, housed in a 144-ball fine-pitch BGA (FGG144) package. A field-programmable gate array (FPGA) is a semiconductor device containing a fabric of programmable logic blocks and interconnects that designers configure in the field, sitting in the system hierarchy between fixed-function ASICs and microprocessor-based solutions. ProASIC3 is Microchip's third-generation flash FPGA family, positioned below the higher-density Igloo2 and PolarFire families for low-to-mid density designs. Key features include nonvolatile flash programming that delivers Live at Power-Up (LAPU) Level 0 support, making the device instant-on without an external configuration ROM; single-chip operation that reduces bill-of-materials cost and board area; and optional soft ARM processor support for embedded control. The 130-nm, 7-layer metal (6 copper) flash-based CMOS process provides inherent security because configuration data is stored in nonvolatile flash rather than loaded from external memory at each boot. Technically, the A3P400 offers four I/O banks with independent VCCIBx supplies, allowing mixed-voltage I/O standards within one device, and reprogrammability that supports iterative design and field upgrades. The flash fabric eliminates the configuration-time vulnerability and standby power of SRAM-based competitors in this density class. Typical applications include industrial control and automation, portable and battery-powered instrumentation, secure embedded systems, space-constrained bridge logic, and power-up-critical designs where the FPGA must be active before a host processor completes initialization. A key design consideration is I/O bank planning: only I/O standards sharing compatible voltage levels may be assigned to the same bank, so bank voltage allocation should be finalized before pin assignment in Libero SoC. This page synthesizes distributor pricing, drop-in alternatives from the same 144-ball footprint family, and practical design notes not consolidated in the manufacturer datasheet.

RFQ پەیوەندی
A3P400-2PQ208 - 400K Gate ProASIC3 FPGA | Microchip
A3P400-2PQ208

A3P400-2PQ208 - 400K Gate ProASIC3 FPGA | Microchip

The Microchip Technology A3P400-2PQ208 is a 400,000-system-gate ProASIC3 field-programmable gate array with 55,296 logic cells, 151 user I/O, and a 310 MHz maximum device frequency in a 208-pin PQFP package. It is built on 130 nm CMOS technology and operates from a 1.5 V core supply, making it a compact reprogrammable logic option for industrial control, communications, instrumentation, and embedded signal-processing systems. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is configured after manufacture. Within the product hierarchy, an FPGA belongs to programmable logic devices, alongside CPLDs, and provides denser parallel logic than a conventional microcontroller or discrete logic implementation. ProASIC3 devices combine flash-programmable configuration, user-programmable logic, and selectable I/O resources in a single integrated circuit. The A3P400-2PQ208 provides four I/O banks, as described in Microchip's A3P1000 migration application note. Each bank has dedicated supply pins, allowing compatible voltage standards to be assigned within a bank. The device also supports 151 user I/O according to the product listing, enabling parallel interfaces to be implemented without an external programmable logic device. The -2 ordering option identifies a specific performance grade, while the PQ208 suffix identifies the 208-pin package configuration. The exact timing constraints, supported I/O standards, configuration interface details, core-voltage range, and absolute maximum ratings should be taken from the package-specific tables in the manufacturer datasheet. Designers should also check the A3P400 pinout-change notice before applying a design that uses an earlier board revision. Typical uses include industrial interfaces, protocol bridges, test equipment, control logic, and low-to-medium-complexity embedded systems. The ProASIC3 architecture is particularly useful when a design requires deterministic parallel logic, flexible I/O assignment, and field reprogrammability without changing the PCB. An external microcontroller or processor can handle supervisory functions while the FPGA executes parallel data acquisition, protocol handling, or control sequencing. PCB design should preserve the manufacturer-recommended power, decoupling, clock, configuration, and I/O routing requirements. Because the A3P400 family uses four I/O banks, assigning incompatible voltage standards to the same bank can prevent correct operation. Confirm the final pin assignment against the current package pinout, reserve the required programming signals, and validate timing with the Microchip Libero design toolchain before fabrication. This page combines the A3P400-2PQ208 device identity, verified product attributes, same-family replacement options, package constraints, and practical implementation guidance. It also highlights which performance and electrical details still require confirmation from the manufacturer documentation before layout release or production qualification.

RFQ پەیوەندی
A3P400-2PQG208 - 400K ProASIC3 FPGA | Microchip PQFP-208
A3P400-2PQG208

A3P400-2PQG208 - 400K ProASIC3 FPGA | Microchip PQFP-208

The Microchip Technology A3P400-2PQG208 is a ProASIC3 flash-based Field Programmable Gate Array (FPGA) with 400,000 system gates, 5,000 logic elements, 55,296 bits of RAM, and 151 user I/Os, housed in a 208-pin PQFP (PQFP-208, 28x28 mm) package. It operates from a 1.5V core supply and is rated for the commercial temperature range of 0°C to +70°C, making it suitable for cost-sensitive industrial and communications applications. What is an FPGA? A Field Programmable Gate Array is an integrated circuit whose logic fabric can be configured after manufacturing. FPGAs belong to the programmable logic device (PLD) family, sitting above CPLDs in logic capacity and below ASICs in per-unit cost at low volumes. The ProASIC3 family specifically uses non-volatile flash-based configuration, so the A3P400 retains its design when power is removed without requiring an external configuration memory. The A3P400-2PQG208 combines a flash-based, single-chip architecture with 151 user I/Os arranged in four I/O banks. Its 400K system gates and 5K logic elements provide moderate density for glue logic, motor control, communication interfaces, and image-processing tasks. The 1.5V core supply reduces dynamic power compared with older 3.3V FPGAs, while the 28x28 mm PQFP-208 package simplifies PCB layout without needing BGA-level routing. Because ProASIC3 uses flash configuration, the device is instant-on and supports secure in-system programming. This eliminates the need for boot flash and simplifies power sequencing, which is a key advantage in industrial control where reliable startup is critical. The device also supports multiple I/O standards through its four I/O banks, giving designers flexibility to interface with 3.3V, 2.5V, and 1.8V peripherals, subject to the bank voltage supplies. Typical applications include industrial motor control, communication protocol bridging, medical device signal processing, and video/image acquisition. The 151 I/Os are sufficient to capture parallel sensor arrays or drive memory buses, while the embedded flash enables secure remote updates over UART or SPI links. When designing with this FPGA, pay close attention to I/O bank supply decoupling and core 1.5V regulation. Use a 0.1uF capacitor near each VCCIBx pin and a bulk 10uF capacitor per bank. The flash configuration eliminates the need for an external configuration device, but a JTAG header should be provided for programming and debug. This page synthesizes distributor availability, pricing, drop-in alternatives, and practical design notes for the A3P400-2PQG208, going beyond the raw datasheet to help engineers evaluate the part for new and existing FPGA designs.

RFQ پەیوەندی
A3P400-FG144 - 55K Logic Cell ProASIC3 Flash FPGA | Microchip
A3P400-FG144

A3P400-FG144 - 55K Logic Cell ProASIC3 Flash FPGA | Microchip

The Microchip Technology A3P400-FG144 is a ProASIC3 flash-based field-programmable gate array delivering 55,296 logic cells, 1 million system gates and 144 kbits of true dual-port SRAM in a 144-ball FG144 plastic BGA package with 97 user I/O in that package. It is a single-chip, surface-mount solution that is reprogrammable and live at power-up. A field-programmable gate array is a programmable logic device whose digital logic, memory and I/O are defined by a configuration bitstream loaded into on-chip non-volatile flash rather than by a mask set. The ProASIC3 family from Microchip Technology (originally Actel) sits in the low-density segment of the FPGA hierarchy, between simple CPLDs and larger masked-programmable or SRAM-based FPGAs, offering a very low total cost of ownership for control, interface and low-bandwidth signal-processing designs. Key device features include a flash configuration architecture that removes the need for an external PROM or configuration EEPROM, Live at Power-Up (LAPU) support for Level 0 devices so the logic is active immediately after reset release, and true dual-port SRAM blocks that allow simultaneous read and write access from independent clock domains. The device also offers optional soft ARM support across the ProASIC3 family, a 130 nm flash-based CMOS process with 7-layer metal (6 copper) interconnect, and four independent I/O banks. The A3P400 is built on a 130 nm flash CMOS process with a 7-layer metal stack, so configuration data is stored on die and the device draws no separate configuration current at run time. Four I/O banks each have dedicated supplies, meaning I/O standards can only be grouped within a bank that shares a compatible voltage, which is a key board-planning constraint. The 144-ball FG144 package measures roughly 17 x 17 mm with a 1.0 mm ball pitch, giving a board footprint in the same class as other 144-pin fine-pitch BGA parts. Typical applications include industrial control and instrumentation, motor and power conversion sequencers, UART/SPI bridge and protocol converters, sensor aggregation, low-rate signal processing, and consumer or medical equipment requiring a compact, re-programmable single-chip solution with no separate configuration memory. When planning the board, treat the FG144 ball map as a fine-pitch BGA and confirm escape routing, via-in-pad and solder mask geometry early. Because I/O banks are voltage-partitioned, plan bank assignments before placing connectors, and keep flash programming and JTAG access reachable for field reconfiguration. This page consolidates device specifications, family-level drop-in alternatives, a parameter-by-parameter comparison and practical board-level design notes, giving engineers the decision context that the family datasheet alone does not provide.

RFQ پەیوەندی
A3P400-FG144I - ProASIC3 FPGA with 97 I/O | Microchip
A3P400-FG144I

A3P400-FG144I - ProASIC3 FPGA with 97 I/O | Microchip

Microchip A3P400-FG144I is a ProASIC3 flash-based FPGA with 55,296 logic elements, 97 user I/O, and a 144-LBGA package. The device combines programmable logic, embedded block RAM, and nonvolatile configuration in a single low-density FPGA platform. It is intended for compact embedded control, industrial interface, communications, and instrumentation designs where deterministic programmable logic is useful without the power and complexity of a higher-density FPGA. A flash-based FPGA is a reconfigurable semiconductor whose configuration memory remains in the device when power is removed. The ProASIC3 family belongs to the FPGA hierarchy, joining programmable logic devices, field-programmable gate arrays, and reconfigurable digital semiconductors. Unlike mask-programmed logic, an A3P400-FG144I can be reconfigured during development or field updates while preserving a compact, integration-focused implementation. The A3P400 device provides 55,296 logic elements and 54 Kb of block RAM for control logic, data buffering, state machines, and protocol handling. Its 97 I/O support enables interaction with external sensors, memory, communications transceivers, and mixed-signal circuitry. The 144-LBGA package offers a compact surface-mount footprint suitable for space-conscious industrial equipment, while the -40 °C to 100 °C industrial junction-temperature range supports harsh operating environments. The nonvolatile configuration architecture supports field-reconfigurable designs without an external configuration PROM. Designers can place soft logic close to associated I/O, use block RAM for buffering or packet storage, and implement control functions without combining a separate microcontroller and programmable logic. The A3P400 platform also supports the ProASIC3 development and programming flow, making design iteration and in-system configuration practical for embedded applications. Typical uses include industrial automation controllers, sensor acquisition systems, communication bridges, embedded data-acquisition units, and compact control platforms. A network interface can place packet parsing or framing logic beside its physical transceiver, while an instrumentation design can use parallel logic to condition signals before conversion. The compact BGA package is particularly useful where connector density and board area limit alternative architectures. PCB implementation requires careful BGA layout, controlled escape routing, and all four power planes or supply groups shown in the manufacturer pinout documentation. Confirm the voltage assigned to each I/O bank against every connected peripheral. Place bypass capacitors close to the device, preserve the recommended ball geometry for assembly, and verify thermal performance with the package dimensions and exposed thermal arrangements specified by Microchip. This product page combines the exact A3P400-FG144I ordering information, manufacturer family information, package constraints, supported drop-in variants, application guidance, and design checks. It is intended to help engineers identify whether the ProASIC3 architecture, industrial temperature grade, 97-I/O count, and 144-LBGA footprint fit an existing embedded or replacement design.

RFQ پەیوەندی
A3P400-FG256 - 256-LBGA ProASIC3 FPGA | Microchip Technology
A3P400-FG256

A3P400-FG256 - 256-LBGA ProASIC3 FPGA | Microchip Technology

The Microchip Technology A3P400-FG256 is a ProASIC3 flash-based field-programmable gate array with 178 I/O, a 400,000-equivalent-gate architecture, and a 256-LBGA package. The device targets medium-complexity embedded logic, industrial control, communications, instrumentation, and legacy ASIC migration designs where a single-chip programmable solution with a large I/O count is required. An FPGA is a programmable digital integrated circuit containing configurable logic blocks, programmable interconnect, and input/output blocks. The ProASIC3 family combines flash configuration memory, instant-on operation, and system-level integration in low-density devices. Its position in the hardware hierarchy is field-programmable logic: more flexible than a fixed ASIC, more parallel and reconfigurable than a microcontroller, and commonly used to implement protocol bridges, control logic, and dedicated datapaths. Key device characteristics include 178 I/O, 55,296 logic elements as listed by DigiKey, and an equivalent gate count of 400,000. The A3P400 also belongs to the 5KLE-class ProASIC3 range identified by Mouser, while a related industrial-temperature ordering code in the A3P400 family supports operation up to 350 MHz. Package-pin-compatible variants in the 256-ball BGA family support design consolidation without changing the board outline. The ProASIC3 architecture integrates programmable logic, dedicated memory resources, JTAG boundary-scan support, and user-configurable I/O performance options. Flash-based configuration allows the device to retain its programmed logic without a separate configuration PROM, making it appropriate for field-updatable industrial equipment. The four-bank I/O organization described in Microchip migration material requires compatible voltage standards to be assigned within each bank. Typical applications include industrial automation controllers, communication protocol converters, data-acquisition systems, embedded test equipment, and control logic for instrumentation or power-management subsystems. A3P400-based designs can consolidate parallel datapath logic and I/O conditioning into one programmable device while retaining field reprogrammability for product variants. Design work should begin with the device pinout and I/O-bank constraints in the manufacturer datasheet, especially because A3P400 pinouts have historically been revised through product change notices. Confirm ball assignments, bank supply voltages, configuration pins, and JTAG connectivity against the exact package ordering code before layout release. This page combines package, density, interface, and lifecycle information with engineering guidance on FPGA migration, I/O-bank planning, and drop-in sourcing alternatives. It also organizes comparable A3P400 ordering codes by package and temperature grade so engineers can evaluate PCB reuse before committing a design to production.

RFQ پەیوەندی
A3P400-FG256I - 400K Gate ProASIC3 FPGA, 178 I/O | Microchip
A3P400-FG256I

A3P400-FG256I - 400K Gate ProASIC3 FPGA, 178 I/O | Microchip

The Microchip Technology A3P400-FG256I is a ProASIC3 flash-based FPGA with 400,000 system gates, 178 user I/Os, and a system performance of 231 MHz, supplied in a 256-ball LBGA (FG256) package rated for -40C to +100C (TJ) operation at a 1.5V core voltage. A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip non-volatile flash memory rather than an external configuration device. Within the programmable logic hierarchy, the A3P400 belongs to the ProASIC3 family -> FPGA -> programmable logic IC -> semiconductor, occupying the mid-density position of the ProASIC3 lineup and offering a single-chip solution that requires no external boot PROM. Key features include non-volatile flash programming for instant-on, single-chip operation; 178 user I/Os supporting bank-selectable voltage standards across four I/O banks; 231 MHz system performance suitable for glue logic, bus bridging, and control datapaths; and the industrial temperature grade (-40C to +100C TJ) that qualifies the part for harsh-environment deployments. The 256-LBGA surface-mount footprint balances ball pitch and board area for aerospace, industrial, and defense platforms. Technically, ProASIC3 devices use a sea-of-gates flash architecture with VersTile logic elements, on-chip flash locking for design security, and four independent I/O banks whose VCCIBx supplies are routed per bank, allowing only electrically compatible I/O standards to share a bank, as documented in Microchip's ProASIC3 migration application notes. Typical applications include industrial automation control, communications bridging, avionics and defense subsystems, and secure single-chip logic replacement for ASIC or mask-programmable devices. When designing, match I/O voltage standards to the correct bank supply and plan power sequencing of VCC/VCCIBx rails per the datasheet. This page synthesizes distributor stock data, family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
A3P400-FG484 - 55,296-Gate ProASIC3 FPGA | Microchip
A3P400-FG484

A3P400-FG484 - 55,296-Gate ProASIC3 FPGA | Microchip

The Microchip A3P400-FG484 is a ProASIC3 flash-based field-programmable gate array with 55,296 system gates, 194 user I/Os, and a 484-ball BGA package. It is designed for compact embedded logic systems requiring programmable nonvolatile configuration, a broad selection of I/O, and low-cost implementation in industrial and commercial equipment. A field-programmable gate array is a digital semiconductor whose logic and interconnect configuration can be programmed after fabrication. An FPGA belongs to the programmable-logic hierarchy, alongside CPLDs, and provides substantially higher logic capacity than conventional mask-programmed devices. The ProASIC3 family combines this post-fabrication flexibility with flash-based configuration, allowing the A3P400 to support product revisions, security updates, and design reuse without external configuration memory. The A3P400-FG484 provides 55,296 system gates and 194 user I/Os in a 484-BGA package. Its nonvolatile flash configuration eliminates the need for a separate configuration PROM in designs that use supported programming methods. The ProASIC3 family also provides programmable I/O resources and supports multiple voltage standards, while its single-chip architecture consolidates logic, configuration storage, and interface functions within one package. Within the ProASIC3 portfolio, available density options extend from low-capacity devices to 1 million system gates, and family configurations provide up to 144 kbits of true dual-port SRAM and up to 300 user I/Os. The A3P400 occupies the middle of this range: its 55,296-gate implementation is appropriate for medium-complexity control logic, bus bridging, protocol conversion, embedded monitoring, and general-purpose programmable I/O aggregation. Typical uses include industrial automation controllers, communication interface modules, test and measurement equipment, embedded instrumentation, and compact control systems. Its relatively high pin count provides substantial parallel I/O capacity, making it useful when a design requires numerous digital connections, multiple interface voltages, or dedicated configuration and control signals within a single programmable device. Design planning should include careful BGA fanout and via-in-pad or via-under-pad construction, multiple supply decoupling, and programming-in-circuit or manufacturing-programming provisions. Because the package exposes many I/O and power connections, signal-integrity and power-distribution planning should be completed before the layout is frozen. The manufacturer product page and A3P400 datasheet should be used to confirm the exact pin assignments, supported I/O standards, operating voltages, and programming configuration for the production design. This product page consolidates the verified device identity, package information, application guidance, technical constraints, and available same-family migration paths. It is intended to help engineers distinguish the A3P400-FG484 from speed- and temperature-grade variants, plan a robust 484-BGA implementation, and identify which functional changes require hardware redesign rather than simple configuration changes.

RFQ پەیوەندی
A3P400-FGG144 ProASIC3 FPGA | Microchip Technology
A3P400-FGG144

A3P400-FGG144 ProASIC3 FPGA | Microchip Technology

The Microchip Technology A3P400-FGG144 is a ProASIC3 field-programmable gate array in a 144-pin plastic BGA package. The device is identified in the product information as a 400,000-gate FPGA with 9,216 configurable logic blocks and operation up to 350 MHz. Its lead-free FGG144 designation identifies the package and environmental ordering configuration used for the A3P400 family. A field-programmable gate array is a programmable digital logic device within the broader FPGA and semiconductor hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic, programmable interconnect, and dedicated I/O resources on one integrated circuit. This allows designers to implement control logic, data acquisition, communications, embedded processing, and signal-processing functions in a compact system while retaining reprogrammability after initial configuration. The A3P400-FGG144 provides 400,000 logic gates, 9,216 configurable logic blocks, and a maximum stated operating frequency of 350 MHz. The 144-pin FBGA or PBGA package is characterized as a 13 mm by 13 mm surface-mount package with a 1 mm ball pitch and approximately 1.45 mm height. These package dimensions make the device suitable for compact industrial, communications, consumer, and embedded-control platforms where a high pin count supports broad parallel I/O requirements. ProASIC3 devices are associated with in-system programmability and a broad range of programmable logic resources. The manufacturer describes the family as offering high performance in ultra-low-density FPGAs, small-footprint packages, reprogrammability, and advanced features. The A3P400 is positioned as a larger logic-capacity member of the ProASIC3 family for designs that require substantially more programmable logic than small low-density devices. Typical applications include industrial automation, data acquisition, communications infrastructure, peripheral control, embedded signal processing, and general-purpose digital control. The 350 MHz device-class performance is useful for designs involving parallel buses, finite-state machines, protocol handling, and moderate-speed data processing, while the 9,216 configurable logic blocks provide substantial design capacity for multi-module systems. PCB implementation requires careful BGA-layout and signal-integrity work. The 1 mm ball pitch demands fine-pitch assembly capability, and the 144 balls must be routed through the package footprint with appropriate power and ground distribution. Use the manufacturer package drawing and pin-description tables when assigning PCB layers, power planes, decoupling, and programming interfaces. This product page consolidates the verified A3P400 device characteristics, package information, sourcing resources, and practical design considerations. It also distinguishes speed-grade, temperature-grade, and industrial-ordering variants from the exact A3P400-FGG144 ordering code.

RFQ پەیوەندی
A3P400-FGG256 - 400K Gate FPGA, 231 MHz | Microchip
A3P400-FGG256

A3P400-FGG256 - 400K Gate FPGA, 231 MHz | Microchip

The Microchip Technology A3P400-FGG256 is a ProASIC3 field-programmable gate array with 400,000 equivalent gates, 178 I/O, and a maximum clock frequency of 231 MHz, supplied in a 256-pin FBGA package. The 256-LBGA arrangement supports dense programmable-logic designs requiring substantial I/O connectivity in a compact surface-mount footprint. A field-programmable gate array is a programmable-logic semiconductor whose configuration defines digital circuits after manufacture. An FPGA belongs to the broader programmable-logic device hierarchy, alongside complex programmable logic devices, while its parallel configurable logic, routing fabric, and programmable I/O allow one device to implement control, datapath, interface, and protocol functions. The ProASIC3 family combines nonvolatile Flash configuration with a single-chip FPGA solution and supports reprogrammability. The A3P400-FGG256 provides 5K logic elements according to its distributor product listing, 178 I/O, and a 1.5 V supply specification. Its 400,000-equivalent-gate capacity is suitable for consolidating multiple fixed-function logic blocks into one programmable component. The 231 MHz operating specification gives designers a defined performance target for synchronous control logic, peripheral bridges, and embedded data-processing functions. ProASIC3 devices use four I/O banks with dedicated bank supplies, allowing compatible voltage standards to be assigned within each bank. This bank-oriented architecture is important when planning mixed-voltage interfaces because I/O assignments must respect each supply domain. Device configuration is stored in Flash, allowing the same hardware design to be updated for field upgrades, protocol revisions, or logic corrections without replacing the FPGA. Typical applications include industrial control, communications, instrumentation, embedded test equipment, and compact embedded systems where parallel logic density and generous I/O are valuable. The device is particularly suitable when firmware-driven product variations or field updates justify using programmable logic instead of a large collection of fixed-function devices. PCB planning should account for the fine-pitch 256-ball package, power-supply distribution across multiple rails, and high-speed routing into the BGA array. Designers should preserve the manufacturer's recommended power, decoupling, and layout practices and verify every I/O-bank voltage assignment against the selected interface standards before releasing the PCB. This page combines the A3P400 family specifications, package and programming characteristics, sourcing guidance, alternative-device analysis, and practical PCB considerations to support faster component selection and design planning.

RFQ پەیوەندی
A3P400-PQ208 - 400K Gate 1.5V FPGA | Microchip Technology
A3P400-PQ208

A3P400-PQ208 - 400K Gate 1.5V FPGA | Microchip Technology

Microchip Technology A3P400-PQ208 is a ProASIC3 flash-based FPGA with 400,000 system gates, 151 user I/O pins, 55,296 bits of embedded RAM, and a 1.5 V core supply in a 208-pin PQFP package. It provides a compact, reprogrammable logic platform for embedded control, communications, industrial automation, and signal-processing designs. An FPGA is a programmable semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. The A3P400 belongs to the ProASIC3 family, combining a nonvolatile flash configuration architecture with a CMOS logic fabric and programmable I/O. This device family is designed for designs that require more flexibility than a fixed-function microcontroller or programmable logic without moving to a larger, higher-cost FPGA platform. Key characteristics include 400,000 system gates, 151 programmable I/O, 55,296 bits of RAM, 231 MHz operation, 1.5 V core voltage, and a 208-pin surface-mount PQFP package. The ProASIC3 architecture also supports single-chip implementation, reprogrammability, and mixed-voltage I/O operation. Its 208-pin package provides a substantial I/O count for legacy parallel buses, control logic, and multi-channel interfaces while remaining compatible with established board-layout practices. The flash-based configuration memory makes the A3P400 suitable for systems that must retain a programmed design across power cycles without an external configuration PROM. Its SRAM resources can support data buffers, state machines, packet handling, and moderate parallel-processing tasks, while the programmable I/O supports connection to external memories, converters, transceivers, and industrial peripherals. Typical applications include industrial automation and factory control, embedded communications equipment, instrumentation, data-acquisition systems, embedded networking, and control boards that require a high pin count. A design should verify voltage-bank assignments, interface standards, pin constraints, and configuration requirements before schematic capture. The manufacturer’s A3P400 product page and ProASIC3 family documentation should be used as the primary references for programming, package pinout, timing, and power-supply implementation. This product summary combines the verified A3P400 family specifications, package information, and practical migration considerations for engineers evaluating the A3P400-PQ208 in embedded FPGA designs. It is intended to support early architecture decisions while leaving detailed implementation checks to the manufacturer datasheet and device programming tools.

RFQ پەیوەندی
A3P400-PQ208I - ProASIC3 FPGA 400K Gates | Microchip
A3P400-PQ208I

A3P400-PQ208I - ProASIC3 FPGA 400K Gates | Microchip

The Microchip Technology A3P400-PQ208I is a ProASIC3 family Field Programmable Gate Array (FPGA) with 400,000 system gates, 55,296 bits of RAM, and 151 user I/Os, housed in a 208-pin PQFP (PQ208) package. It operates from a 1.5V core supply and supports system performance up to 231 MHz, making it a high-performance, low-density, single-chip solution for a wide range of applications. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. FPGAs are part of the programmable logic device (PLD) hierarchy, which sits above CPLDs and below ASICs in terms of density and design flexibility. They are used to prototype ASIC designs, implement glue logic, and accelerate compute-intensive tasks in embedded systems. Key features of the A3P400-PQ208I include nonvolatile flash-based configuration, which provides 'Instant On' operation and inherent security against reverse engineering. The device is reprogrammable, allowing design updates in the field. It offers 151 user I/Os with support for multiple I/O standards, and 55,296 bits of RAM for data buffering and storage. The 1.5V core supply minimizes power consumption, while the 208-pin PQFP package provides a compact footprint for space-constrained designs. Technically, the A3P400 is built on a 130nm CMOS flash process, which combines the low power of CMOS with the nonvolatility of flash memory. This architecture eliminates the need for external configuration memory, reducing system cost and board space. The device includes four I/O banks with dedicated supply pins, enabling flexible voltage standard assignment. The ProASIC3 family is supported by Microchip's Libero SoC design suite, which provides synthesis, place-and-route, and programming tools. Typical applications for the A3P400-PQ208I include industrial control systems, automotive electronics, communications infrastructure, and consumer electronics. Its low power and instant-on capability make it suitable for battery-powered devices, while its security features protect intellectual property in high-value designs. When designing with this device, ensure that the 1.5V core supply is properly decoupled with 0.1uF and 10uF capacitors placed close to the VCC pins. The I/O banks must be assigned compatible voltage standards to avoid damage. The device supports JTAG programming, which can be used for both configuration and debugging. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A3P400-PQ208I.

RFQ پەیوەندی
A3P400-PQG208 - ProASIC3 FPGA, 400K Gates | Microchip
A3P400-PQG208

A3P400-PQG208 - ProASIC3 FPGA, 400K Gates | Microchip

The Microchip Technology A3P400-PQG208 is a ProASIC3 flash-based Field Programmable Gate Array (FPGA) offering 400,000 system gates, 151 user I/Os, and 55,296 bits of true dual-port SRAM, housed in a 208-pin PQFP (BFQFP) package. It operates with a system performance of up to 231 MHz and supports 2.5 V and 3.3 V mixed-voltage operation, making it a versatile choice for a wide range of applications. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence "field-programmable." Unlike ASICs, FPGAs can be reprogrammed to implement different logic functions, making them ideal for prototyping, low-volume production, and applications requiring flexibility. The ProASIC3 family uses nonvolatile flash technology, providing a single-chip, secure, low-power solution that is "Instant On" and reprogrammable, offering time-to-market benefits at an ASIC-level unit cost. Key features of the A3P400-PQG208 include 400,000 system gates, 151 user I/Os, and 55,296 bits of true dual-port SRAM. It supports 700 Mbps DDR and LVDS-capable I/Os (on A3P250 and above), and offers wide-range power operation. The device is lead-free and RoHS compliant, ensuring environmental compliance. The 208-pin PQFP package provides a compact footprint while allowing sufficient I/O for complex designs. Technically, the ProASIC3 family is built on a flash-based architecture, which eliminates the need for external configuration memory and provides inherent security against reverse engineering. The device includes four I/O banks with dedicated supplies, enabling mixed-voltage operation. The A3P400 supports up to 231 MHz system performance, making it suitable for high-speed applications. The flash-based configuration also allows for instant-on operation, reducing power-up latency. Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics. The A3P400's low power consumption and security features make it ideal for battery-powered devices and applications requiring IP protection. Its reprogrammability allows for field updates and design iterations without hardware changes. When designing with the A3P400-PQG208, consider the I/O bank voltage requirements and ensure proper decoupling of the VCC and VCCIBx pins. The device supports 2.5 V and 3.3 V mixed-voltage operation, so plan the power supply accordingly. Also, note that the PQFP package requires careful PCB layout for thermal management and signal integrity. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A3P400-PQG208.

RFQ پەیوەندی