FPGA & CPLD
بەرهەمەکان (8,400+)
A3P250-1VQG100M - ProASIC3 FPGA 250K Gates 100-TQFP | Microchip
The Microchip Technology A3P250-1VQG100M is a ProASIC3 flash-based FPGA with 250K system gates, 68 user I/Os, 36864 bits of embedded fabric memory, and a 272 MHz system performance rating, housed in a 100-pin TQFP (VQG100) package. Fabricated on a 130 nm flash process and operating from a 1.5V core supply, it delivers a single-chip, nonvolatile programmable logic solution. A flash FPGA is a field-programmable gate array whose configuration is stored in on-chip flash cells rather than an external configuration PROM. Unlike SRAM FPGAs, flash FPGAs are Instant On at power-up, require no boot device, and are inherently more secure because the bitstream is never exposed externally. ProASIC3 sits in Microchip's (formerly Actel/Microsemi) low-density flash FPGA hierarchy, below the ProASIC3E and IGLOO families. Key features include nonvolatile flash programming that eliminates external configuration storage, low total cost of ownership (TOC) through a single-chip solution, reprogrammability for design updates in the field, and small-footprint 100-TQFP packaging suited to space-constrained boards. The 68 user I/Os support common single-ended standards, and the fabric includes embedded RAM blocks totaling 36864 bits for FIFOs and buffering. Architecturally, ProASIC3 uses a sea-of-gates fabric of Versatile tiles on a 130 nm process with a 1.5V core. The '-1' speed grade balances performance and cost, supporting system speeds up to 272 MHz, adequate for glue logic, bus bridging, and control-plane functions. Typical applications include industrial control and automation, portable and battery-operated instruments benefiting from low static power, communication interface bridging, and ASIC prototyping or low-volume production where mask costs are prohibitive. For design, the '-1' speed grade limits maximum fabric performance compared to '-2' variants; verify timing closure in Libero SoC before committing. The commercial temperature grade (no 'I' suffix) restricts use to 0C to +70C environments. This page synthesizes distributor pricing tiers, drop-in alternatives within the same 100-TQFP footprint, and practical design notes not consolidated in the manufacturer datasheet.
A3P250-1VQG100T - ProASIC3 FPGA 250k Gates TQFP-100 | Microchip
The Microchip Technology (formerly Microsemi/Microsemi Corporation) A3P250-1VQG100T is a ProASIC3 flash-based FPGA with 250,000 system gates (6144 CLBs / 6144 cells), 68 user I/O, 36864 bits of embedded RAM, and system performance up to 350 MHz, housed in a 100-pin VQFP/TQFP (14x14 mm, 0.5 mm pitch) surface-mount package. A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip flash memory rather than an external configuration device. Within the programmable logic hierarchy, the A3P250 sits in the low-density tier of the ProASIC3 family: FPGA -> flash FPGA -> ProASIC3 -> A3P250. Because the configuration data is nonvolatile and live-at-power-up, no external boot flash or microcontroller supervisory logic is required, making it a true single-chip solution. Key features include reprogrammable flash fabric (secure, low total cost of ownership), 1.425V to 1.575V single core supply (1.5V nominal), an automotive grade designation in this ordering option, and an industrial operating range of -40C to +125C (TA). The 68 user I/O support common single-ended standards, and the 36864-bit embedded RAM supports small FIFOs and buffers in glue-logic and control designs. The ProASIC3 architecture uses a sea-of-vanadium-gate flash switch fabric with fine-grained VersaTiles, delivering deterministic performance suitable for control-plane logic, state machines, bus bridging, and power-up-critical functions. The device is programmed with Microchip Libero SoC design suite and supports in-system reprogramming. Typical applications include industrial automation control, automotive subsystems (this is an automotive-grade ordering option), power-up sequencers and glue logic, and portable/instrumentation designs needing a single-chip nonvolatile FPGA. Design consideration: keep the 1.5V core supply within the 1.425V to 1.575V window with a dedicated regulator; the TQFP-100 leads require careful solder-joint inspection (0.5 mm pitch). This page synthesizes distributor pricing, drop-in same-footprint family alternatives, and practical design notes not found in the manufacturer datasheet.
A3P250-2FG256 - ProASIC3 FPGA, 36Kb RAM, 256-FPBGA
The Microchip Technology A3P250-2FG256 is a ProASIC3 flash-based field-programmable gate array in a 256-FPBGA package, with 157 I/O, 36 Kb of block RAM, speed grade 2, and a commercial junction-temperature range of 0°C to 85°C. The device supports programmable logic, embedded memory, and reconfigurable I/O within a single package. A ProASIC3 FPGA is a reprogrammable semiconductor in the FPGA and CPLD hierarchy. Its flash configuration memory allows the circuit to be programmed without a separate external configuration PROM, while its programmable logic blocks and block RAM support parallel processing, control, data acquisition, and interface bridging. Unlike a fixed-function ASIC, an FPGA can be revised in hardware to accommodate design changes and field upgrades. The A3P250-2FG256 combines 157 user I/O with 36 Kb of block RAM in a compact 17 mm × 17 mm 256-FPBGA package. Speed grade 2 identifies its timing-performance class, while the commercial temperature designation targets equipment operating within a 0°C to 85°C junction range. These characteristics make the device suitable for compact embedded systems requiring substantial parallel logic and moderate memory capacity. Its reprogrammable flash architecture creates a practical alternative to mask-programmed custom logic. Engineers can implement parallel datapaths, state machines, protocol interfaces, and control logic on the same programmable fabric. The 157 available I/O also support integration with external memory, sensors, converters, and communication transceivers, although each design must respect the package-specific pinout and bank constraints described in the manufacturer documentation. Typical applications include industrial automation, instrumentation, communication equipment, embedded control, data acquisition, and compact control systems. In a data-conversion front end, programmable logic can coordinate sampling, filtering, buffering, and data transfer. In communications equipment, the FPGA can implement protocol conversion, framing, or test logic while retaining the ability to update configuration as interfaces evolve. PCB implementation should account for the fine-pitch 256-FPBGA geometry, power and ground distribution, decoupling, and thermal dissipation. Follow the manufacturer’s package footprint, pin-definition table, power-supply sequencing, and programming guidance to avoid signal-integrity or assembly problems. Validate timing with the complete system constraints rather than relying on device speed grade alone. This page combines package, capacity, interface, and application information with a focused engineering comparison of documented ProASIC3 alternatives. It also highlights replacement constraints, commercial sourcing steps, and implementation guidance that help buyers distinguish a true same-footprint migration from a merely similar FPGA.
A3P250-2FGG144 - ProASIC3 Flash FPGA 250K Gates | Microchip
The Microchip Technology (Microsemi) A3P250-2FGG144 is a ProASIC3 flash-based FPGA with 250K system gates, 97 user I/Os, a maximum system performance of 310 MHz, and a 1.5 V core supply, housed in a 144-ball Fine-Pitch Ball Grid Array (FBGA-144) package supplied in a tray. A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip non-volatile flash memory cells rather than an external configuration ROM. Within the digital logic hierarchy, it sits as a programmable logic device -> FPGA -> programmable SoC platform component. Because the configuration is retained in flash, ProASIC3 devices power up instantly with no external boot device, are inherently single-chip solutions, and are resistant to configuration corruption from radiation or power glitches. Key features of the A3P250-2FGG144 include its 130 nm flash process technology for low static power, speed grade -2 performance up to 310 MHz for system-level timing closure, 97 user I/Os supporting common single-ended standards, and reprogrammability that eliminates obsolete-configuration risk in fielded systems. Microchip also lists low total cost of ownership and optional soft ARM support for the ProASIC3 family. Architecturally, ProASIC3 combines versatile fabric tiles with flash-based switching and logic elements, delivering deterministic routing and secure, live-at-power-up operation. The absence of a configuration bitstream load time improves system availability, and on-chip flash enables secure field upgrades without an external flash memory on the PCB. Typical applications include industrial control and automation, bridging and glue logic consolidation, portable and space-constrained instrumentation, and secure boot or configuration-management functions where instant-on operation is mandatory. Design consideration: the 1.5 V core requires a clean, low-noise core rail with proper decoupling, and the FBGA-144 land pattern demands careful BGA rework capability; confirm bank I/O voltage assignments early in pin planning. This page synthesizes distributor pricing and stock signals, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
A3P250-2FGG144I - ProASIC3 FPGA 250K Gates | Microchip
The Microchip Technology (formerly Microsemi/Actel) A3P250-2FGG144I is a ProASIC3 family flash-based FPGA with approximately 250K gates, 6144 logic elements (3K clusters per distributor listings), up to 97 user I/Os, 36864 bits of embedded memory, and a 310 MHz system performance figure, housed in a 144-ball Fine-Pitch BGA (FGG144) package for industrial temperature ranges (-40C to +85C). A flash-based FPGA is a field-programmable gate array whose configuration is stored in on-chip non-volatile flash memory rather than an external configuration ROM. Within the programmable logic hierarchy, the FPGA sits above CPLDs and below ASICs, offering reprogrammability with single-chip boot. ProASIC3 devices use a 130 nm flash process, which gives them inherent instant-on behavior and resistance to configuration upset compared to SRAM FPGAs. Key features include a 1.5 V core supply, non-volatile flash programming that eliminates the external boot device, reprogrammability for field updates, and low total cost of ownership as highlighted by Microchip. The -2 speed grade balances performance and cost within the A3P250 family, supporting system clock rates up to 310 MHz in fabric-rich designs. Architecturally, the A3P250 combines VersaTiles (fine-grained logic tiles), embedded SRAM blocks totaling 36 Kbits, and flexible I/O banks supporting multiple single-ended and differential standards. The flash cell-based switch fabric removes the need for configuration controllers and simplifies power sequencing. Typical applications include industrial automation control, motor drive interface logic, communications protocol bridging, aerospace and defense glue logic, and secure single-chip designs where non-volatile configuration matters. Design consideration: budget the 1.5 V core and 3.3 V I/O rails separately, and verify I/O bank voltage assignments against the 97 available user I/Os before pin locking in Libero SoC. This page synthesizes distributor pricing, same-package alternatives, and practical design notes not found in the manufacturer datasheet.
A3P250-2PQ208 - 250K Gate 310MHz FPGA | Microchip
The Microchip A3P250-2PQ208 is a ProASIC3 field-programmable gate array with 250,000 logic gates, a maximum operating frequency of 310 MHz, and a 1.5 V core supply. The device is packaged in a 208-pin PQFP and provides 151 I/O, making it suitable for programmable control, interface, and embedded signal-processing systems. Its 130 nm process technology supports a broad range of industrial logic implementations where deterministic reprogrammability and a consolidated design are valuable. A field-programmable gate array, or FPGA, is a programmable semiconductor in the logic IC and semiconductor hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA implements digital logic through a configurable logic and interconnect fabric. The A3P250 sits within the ProASIC3 family of reprogrammable logic devices, combining logic density with in-system reconfiguration for prototypes, production control systems, communications equipment, and industrial automation. The headline resources are 250K programmable gates, a 310 MHz maximum frequency, a 1.5 V core voltage, and 151 available I/O in a 208-pin package. The -2 designation identifies the device speed grade within the A3P250 ordering scheme. These characteristics make the part relevant to designs containing parallel data paths, state machines, protocol interfaces, control logic, and modest DSP pipelines where a 310 MHz device operating from a 1.5 V core provides an appropriate balance of speed, density, and integration. The ProASIC3 architecture uses configurable logic elements and programmable routing to implement system functions in parallel rather than executing them sequentially. This parallel architecture is useful for deterministic control and data-processing tasks. At 310 MHz, clocked logic can process high-speed state transitions and multi-bit datapaths, while the 151 I/O provide interfaces to external memory, converters, transceivers, control signals, and industrial peripherals. The 130 nm fabrication technology identifies the device as a mature programmable-logic platform rather than a leading-edge high-density FPGA. Typical uses include industrial factory automation, industrial motor and process control, communications protocol conversion, embedded instrumentation, and compact control modules. It can also serve as a prototyping platform for larger programmable-logic designs because its configuration approach allows the same board architecture to be reused when the programmed function changes. For designs requiring substantially more logic, memory resources, or higher I/O density, the A3P250 may be replaced by a larger device with a revised PCB footprint and power architecture. The principal design consideration is package migration. A3P250 pin compatibility with lower-density devices depends on the specific package, as documented in Microchip's ProASIC3 migration guidance. Designers should preserve power, ground, configuration, clock, and I/O assignments, then validate timing, I/O standards, pin constraints, and configuration behavior before changing the device. A 310 MHz design also requires disciplined clock distribution, decoupling, and signal-integrity practices. This product overview combines the device's gate density, frequency, voltage, package, and migration considerations with practical guidance for FPGA evaluation. It also distinguishes verified same-package family options from broader functional alternatives, helping engineers assess replacement risk before committing to a PCB or production configuration.
A3P250-2PQG208 - ProASIC3 Flash FPGA, 250K Gates | Microchip
The Microchip Technology A3P250-2PQG208 is a ProASIC3 flash-based field programmable gate array (FPGA) with approximately 250,000 system gates, a maximum operating frequency of 310 MHz, and 151 user I/O pins, housed in a 208-pin PQFP (208-BFQFP) surface-mount package operating at a 1.5V core voltage on a 130nm flash process. A flash-based FPGA is a programmable logic device that stores its configuration in non-volatile on-chip flash memory rather than the volatile SRAM cells used by most mainstream FPGAs. Because configuration data is retained in the device itself, a flash FPGA powers up instantly as a single-chip solution with no external boot PROM, no configuration controller, and no configuration-time window that could be disturbed in radiation-prone or security-sensitive environments. Within the programmable logic hierarchy, the ProASIC3 family sits in the low-to-mid density class, bridging CPLDs and larger SRAM FPGAs. Key features of the A3P250 include single-chip, reprogrammable flash fabric with low total cost of ownership, system performance up to 310 MHz, and an abundance of advanced features including optional soft ARM support per the ProASIC3 family datasheet. The 151 available user I/O support common single-ended standards, enabling glue logic, bus bridging, and control-plane designs. Technically, the ProASIC3 fabric is built on a 130nm flash process with a sea-of-modules architecture of versatile logic elements; the -2 speed grade denotes the faster of the commercial speed grades for this density. The non-volatile fabric eliminates configuration storage and improves board-level reliability and security relative to SRAM FPGAs. Typical applications include industrial automation control, aerospace and defense subsystems, secure embedded controllers, power sequencing and board management, and communications line-card glue logic - all use cases that benefit from instant-on, low-profile, single-chip programmable logic. Design consideration: plan the 1.5V core and I/O bank supplies with proper decoupling, and verify I/O banking rules in Microchip Libero SoC before fixing pin assignments on the 208-pin PQFP footprint. This page synthesizes distributor pricing, drop-in alternatives within the same 208-pin PQFP footprint, and practical design notes not found in the manufacturer datasheet.
A3P250-2PQG208I - ProASIC3 FPGA 250K Gates | Microchip
The Microchip Technology (Microsemi/Actel) A3P250-2PQG208I is a ProASIC3 family flash-based FPGA with 250K gates, 3K logic elements (LEs), 36864 bits of user flash, and 151 user I/Os, housed in a 208-pin fine-pitch PQFP (PQG208) package with an industrial temperature rating of -40C to +85C and a 1.5V core supply. A flash-based FPGA is a field-programmable gate array that stores its configuration in on-chip non-volatile flash memory rather than an external configuration ROM. Within the programmable logic hierarchy, the ProASIC3 sits at the low-density end of the FPGA taxonomy, below mid-range SRAM FPGAs, and functions as a single-chip system glue logic, control, and interface device. Key features include non-volatile flash programming that eliminates the external boot PROM and enables instant-on operation, reprogrammability for in-field updates, 130nm flash process technology, system performance up to 310 MHz, and low total cost of ownership thanks to the single-chip solution and small-footprint package options. The ProASIC3 architecture uses a sea-of-vanilla-gates (Voic) logic fabric built from VersaTiles, each configurable as a lookup table or D flip-flop, with dedicated flash switches holding the configuration. The -2 speed grade balances timing performance with power, and the low 1.5V core voltage keeps dynamic power low. Live reprogramming via JTAG supports design iteration without soldering changes. Typical applications include industrial automation control, aerospace and defense secure logic, medical instrumentation, communications bridging, and power-on instant-on embedded control where configuration volatile memory is undesirable. Design consideration: bond all recommended VCCA, VCCI, and GND pins per the manufacturer datasheet and follow Microchip power-decoupling guidance; use Libero SoC software for synthesis, place-and-route, and timing signoff. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
A3P250-2VQG100 - ProASIC3 FPGA, 68 I/O, 1.5V | Microchip
The Microchip Technology A3P250-2VQG100 is a ProASIC3 flash-based FPGA offering 68 user I/Os, 36864 bits of embedded memory, a 1.5V core supply, and up to 310 MHz system performance, housed in a 100-pin TQFP (VQFP-100) surface-mount package. A field-programmable gate array (FPGA) is a semiconductor device containing a fabric of configurable logic blocks, routing resources, and I/O cells that the designer programs after manufacturing. Unlike SRAM-based FPGAs that require an external configuration device, the ProASIC3 family stores its configuration in on-chip flash, making it a true single-chip solution within the broader hierarchy of programmable logic devices (FPGA -> programmable logic IC -> digital IC). Key differentiating features include flash-based, live-at-power-up operation with no external boot device, low total cost of ownership, reprogrammability for in-field updates, and small-footprint packaging. The 1.5V core keeps dynamic power low, while the -2 speed grade delivers up to 310 MHz internal performance for compact control and glue-logic designs. The ProASIC3 architecture uses fine-grained VersaTiles with 3-input look-up tables, backed by embedded flash blocks providing the 36864 bits of on-chip memory. The single-chip, instant-on nature eliminates configuration PROMs, improving board reliability and reducing BOM cost, and the flash cell is inherently resistant to configuration upset compared with SRAM fabrics. Typical applications include industrial control and automation, portable and battery-powered instruments, aerospace and defense secure designs, communications bridge logic, and medical diagnostic equipment - anywhere a compact, low-power, instant-on programmable device is preferred over a larger SRAM FPGA. When designing with the A3P250-2VQG100, decouple the 1.5V core and 3.3V I/O supplies with appropriate ceramic capacitor networks, and confirm commercial-grade temperature limits (0C to +70C) against the intended environment - industrial-temperature variants use different ordering codes. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers a one-stop selection reference.
A3P250-FG144 - 3K LEs, 36Kb RAM Flash FPGA | Microchip
The Microchip Technology A3P250-FG144 is a ProASIC3 flash field-programmable gate array with 3K logic elements, 36 Kb of block RAM, and 144 leads in a 13 × 13 mm FPBGA package. It operates in the commercial temperature range with a junction-temperature rating of 0°C to 85°C. The device combines nonvolatile configuration storage, programmable digital logic, and embedded block RAM in one integrated circuit. A ProASIC3 FPGA belongs to the field-programmable gate array hierarchy within programmable logic devices and semiconductors. Unlike mask-programmable custom logic, an FPGA can be configured or reprogrammed after manufacture, allowing design changes, prototyping, field updates, and logic consolidation within one device. ProASIC3 devices are flash-based, so their configuration is retained without a separate external configuration PROM. Key features include approximately 3K logic elements, 36 Kb of block RAM, single-chip implementation, reprogrammability, and a compact 144-lead package. These resources make the A3P250-FG144 suitable for control logic, protocol bridging, industrial interface adaptation, embedded signal processing, and general-purpose programmable digital systems. Its commercial junction-temperature rating supports equipment deployed in controlled indoor environments. The ProASIC3 architecture places programmable logic and configurable RAM within a flash-based FPGA framework. System designers can divide the available logic and memory among parallel datapaths, state machines, control processors, and peripheral interfaces. Because configuration is stored in on-chip flash, the finished board requires fewer supporting components than a design based on a volatile FPGA and external configuration memory. Migration documentation also identifies package-level pin compatibility as a key consideration when moving between ProASIC3 density options. Typical applications include industrial automation controllers, instrumentation, communications equipment, embedded control systems, and compact data-acquisition modules. The device is particularly appropriate when a design needs moderate logic density, on-chip RAM, field reconfiguration, and a relatively compact package. It is not intended for designs requiring the logic capacity or I/O performance of a much larger FPGA family. Before finalizing a PCB design, verify the complete FG144 pinout, bank supply requirements, configuration behavior, and decoupling recommendations in the manufacturer datasheet. Pay particular attention to the dedicated configuration pins and I/O power requirements, and preserve the package-specific footprint and thermal design. Because a 13 × 13 mm BGA can create assembly and inspection challenges, prototype assembly should use a package-qualified process. This page combines the manufacturer product information, family migration guidance, exact package identification, sourcing details, and practical selection considerations. It also distinguishes the target ordering code from other ProASIC3 density and package options so engineers can assess footprint compatibility before committing to a replacement or redesign.
A3P250-FG144T - ProASIC3 250K-Gate Flash FPGA | Microchip
The Microchip (formerly Microsemi/Actel) A3P250-FG144T is a 250,000-gate ProASIC3 flash-based FPGA with 231 MHz system performance, 1.5 V core supply, and 97 user I/Os in a 144-ball FBGA package. Built on 130 nm flash technology, it is part of the automotive-qualified ProASIC3 family. A flash-based FPGA stores its configuration in on-chip flash cells rather than SRAM, so the A3P250-FG144T is a single-chip, non-volatile solution that powers up instantly without an external configuration PROM or boot flash. Within the programmable logic hierarchy (FPGA -> programmable logic device -> digital logic IC), this differentiates ProASIC3 from SRAM FPGAs such as the Xilinx Spartan family, improving security and reducing board cost. Key features include 6144 CLBs, a system clock rate of 231 MHz, 97 user I/Os with flexible standards support, instant-on operation, and live reprogrammability. The flash fabric also provides inherent protection against configuration cloning, a frequently cited advantage in automotive and industrial designs. Low total cost of ownership (TOC) and small-footprint packaging are core family features listed by Microchip. The ProASIC3 architecture uses a fine-grained VersTile logic element on a 130 nm flash process, with embedded SRAM blocks available for FIFOs and dual-port memories. Clock conditioning and I/O registers support high-performance synchronous designs implemented through Microchip Libero SoC design tools. Typical applications include automotive body and powertrain control, industrial motor control and automation, portable instrumentation, and secure embedded control where instant-on and configuration security matter. Design consideration: the 144-FBGA requires careful PCB layout with controlled-impedance routing and recommended power decoupling; verify the FG versus FGG package variant (solder-ball composition) matches your assembly process. This page synthesizes distributor pricing, same-family drop-in variants, and practical design notes not found in the manufacturer datasheet.
A3P250-FG256 - 3KLE ProASIC3 Flash FPGA | Microchip
Microchip Technology A3P250-FG256 is a ProASIC3 flash-based field-programmable gate array with approximately 250,000 logic elements, 157 user I/Os, and 256-LBGA packaging. The device operates from a 1.425 V to 1.575 V supply range, supports a 0°C to 85°C junction-temperature range, and is supplied in a tray. Its 17 mm × 17 mm surface-mount package is designed for compact embedded control, communications, industrial, and instrumentation systems. A ProASIC3 FPGA belongs to the programmable-logic hierarchy: FPGA → field-programmable gate array → programmable logic device → semiconductor. Unlike mask-programmed custom logic, a flash-based FPGA can be reconfigured in the field with stored programming data. This makes it useful when designs need configurable logic, downloadable firmware, field updates, or a bridge between prototype development and production hardware. The A3P250 family provides up to 144 kbits of true dual-port SRAM, up to 300 user I/Os across family members, and configurable logic built around three-input lookup-table equivalents and flip-flop/latch resources. A3P250-FG256 specifically provides 157 user I/Os and 36,864 bits of associated device data in its catalog description. Its reprogrammable flash technology supports nonvolatile configuration and deterministic field updates. The device is manufactured using a 130 nm, seven-layer metal flash-based CMOS process with six copper layers. This process combines embedded nonvolatile memory with programmable logic in one package. The A3P250-FG256 is positioned as an ultra-low-density ProASIC3 option for designs requiring moderate logic density, numerous I/Os, and a compact 256-ball package rather than a very large high-density FPGA. Typical uses include industrial control interfaces, data-acquisition equipment, communications equipment, embedded protocol bridges, and compact control modules. Its 157 I/Os allow direct connection to sensors, converters, memories, transceivers, and discrete digital components. Designers should still confirm each ball assignment and voltage compatibility in the manufacturer pin table before finalizing a PCB footprint. The principal design consideration is power and I/O planning. Place the 1.425 V to 1.575 V core supply exactly as specified, use the manufacturer's recommended decoupling arrangement, and assign I/O standards that satisfy the selected bank’s voltage and interface limits. Program the device with the supported development environment, verify timing after placement and routing, and validate power-up behavior in the final system. This page combines the verified device identity, package information, operating limits, structured comparisons, drop-in candidates, application guidance, and practical implementation notes. It helps engineers identify whether the A3P250-FG256 fits an existing 256-LBGA design before requesting a quote for production planning.
A3P250-FG256T - ProASIC3 250K-Gate Flash FPGA | Microchip
The Microchip Technology A3P250-FG256T is a 250,000-gate ProASIC3 flash FPGA operating at up to 231 MHz system performance, fabricated on a 130 nm process with a 1.5V core supply, housed in a 256-ball FBGA (FG256) package supplied in tray packaging. According to the Microchip product page and distributor listings, the device provides 157 user I/Os and 36,864 bits of embedded memory, making it a single-chip, reprogrammable logic solution for low-to-mid-density designs. A flash FPGA is a type of field-programmable gate array that stores its configuration in on-chip flash memory rather than volatile SRAM. This places the ProASIC3 within the broader hierarchy of programmable logic devices: flash FPGA -> FPGA -> programmable logic -> semiconductor. Because the configuration is nonvolatile, the A3P250 powers up instantly without an external configuration device, reducing total cost of ownership (TOC), board space, and bill-of-materials complexity compared with SRAM FPGAs. Key features highlighted by Microchip include low total cost of ownership, system performance in ultra-low-density devices, a single-chip solution, small-footprint packages, and reprogrammability. The unique VersaTile architecture allows each logic tile to function as a three-input LUT equivalent or as a D-flip-flop/latch with enable, improving fabric utilization. Technically, the A3P250 targets the 130 nm flash process with a 1.5V core, supporting automotive-grade temperature operation per distributor specifications. The 256-ball FBGA footprint supports high I/O density in a compact surface-mount form factor. Distributor data indicates the device is used where instant-on, secure, nonvolatile configuration is required, including industrial control, communications interface bridging, and automotive subsystems. Typical applications include industrial automation controllers, glue logic and bus bridging, motor control interfaces, and portable instrumentation where a small footprint and single-chip solution matter. The A3P250 fits designs that need FPGA flexibility without configuration PROMs or power-up configuration sequencing. When designing with the A3P250-FG256T, verify I/O banking voltage compatibility with adjacent logic and follow Microchip power decoupling guidelines for the 1.5V core rail; migration to lower-density A3P030/A3P060/A3P125 devices is documented in the Microchip pin-compatibility application note. This page synthesizes distributor pricing, same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.
A3P250-FGG144 - 250K Gate ProASIC3 FPGA | Microchip
The Microchip Technology A3P250-FGG144 is a ProASIC3 field-programmable gate array with 250,000 logic gates, 97 I/O, and a 144-LBGA package. It is designed for compact embedded systems requiring programmable logic, reconfigurable I/O, and a single-chip implementation of digital control, interface, or signal-processing functions. The verified distributor record identifies it as a ProASIC3 FPGA IC with 97 I/O and a 144-LBGA package. A field-programmable gate array is a programmable digital semiconductor. Unlike a fixed-function application-specific integrated circuit, an FPGA can be configured after manufacture to implement combinational and sequential logic. An FPGA sits in the broader hierarchy of programmable logic devices and embedded semiconductors, enabling design changes without replacing the physical IC when logic requirements evolve. The verified data identifies the A3P250-FGG144 as a ProASIC3 device and separately reports 250,000 gates, 97 I/O, and a 144-LBGA package. The related A3P250 family page describes ProASIC3 devices as reprogrammable, low-density FPGAs with small-footprint packages and advanced features. These attributes make the device relevant to industrial control, communications, consumer electronics, and embedded interface designs, subject to the specific electrical, timing, and tool requirements that must be checked in the manufacturer documentation. The FGG144 package is a fine-pitch ball-grid-array package suitable for dense PCB layouts. Package-level design work should account for ball pitch, escape routing, power and ground distribution, decoupling, programming access, and thermal performance. The exact pin names, voltage ratings, timing grades, and programming interface details were not included in the supplied verified data and therefore are marked as data needed rather than inferred. Typical design considerations include validating the clock and reset architecture, confirming that all external interfaces fit within 97 available I/O, planning deterministic programming and configuration behavior, and reviewing the manufacturer’s package and timing documentation before layout release. The device should not be treated as a universal cross-brand replacement without verifying pinout, voltage, timing, configuration memory, and software-tool compatibility. This page consolidates verified distributor and manufacturer information with sourcing questions and design guidance. It is intended to support initial component selection, not to replace the complete A3P250 family datasheet, package drawing, timing specification, or configuration-tool documentation.
A3P250-FGG144I - ProASIC3 FPGA 250K Gates | Microchip
The Microchip Technology A3P250-FGG144I is a ProASIC3 flash-based Field Programmable Gate Array (FPGA) with 250,000 system gates, 3K logic elements, and 36 Kbits of fabric RAM, housed in a 144-ball FBGA (13x13 mm, 1 mm pitch) package. It operates at a maximum internal frequency of 350 MHz and provides 97 user I/Os, making it a low-cost, low-power, single-chip solution for a wide range of industrial, communications, and consumer applications. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement custom digital logic functions. Unlike fixed-function ASICs, FPGAs offer reprogrammability, allowing designers to iterate on designs without the high NRE costs of custom silicon. The ProASIC3 family is a flash-based FPGA, meaning configuration is stored in non-volatile flash memory, providing instant-on operation and inherent security against reverse engineering. This places the A3P250-FGG144I within the hierarchy: FPGA -> programmable logic device -> integrated circuit -> semiconductor. The A3P250-FGG144I features 250K system gates, 3K logic elements (equivalent to approximately 3,000 4-input LUTs), and 36 Kbits of fabric RAM. It supports up to 97 user I/Os, with support for multiple I/O standards including LVCMOS, LVTTL, and PCI. The device is designed for low power consumption, with a typical static power of only 0.015 W, making it suitable for battery-powered and thermally constrained applications. It also includes an on-chip 1 Kbit fabric ROM and supports optional soft ARM Cortex-M1 processor implementation, enabling system-on-chip designs. Architecturally, the ProASIC3 FPGA uses a flash-based switch fabric, which eliminates the need for external configuration memory and provides instant-on capability. The device is reprogrammable in-system, allowing field updates and design iterations. It supports a wide operating voltage range of 1.425V to 1.575V for the core, with I/O banks configurable for 1.5V, 1.8V, 2.5V, and 3.3V. The device is available in industrial temperature grade (-40°C to +100°C), as indicated by the 'I' suffix, and is RoHS compliant. Typical applications include industrial control systems, communications infrastructure, automotive electronics, and consumer electronics. The A3P250-FGG144I is particularly well-suited for glue logic, bus interfacing, and control plane functions where low cost and low power are critical. Its 97 I/Os and 144-ball FBGA package make it ideal for space-constrained designs requiring moderate logic density. When designing with this device, ensure proper decoupling of the core and I/O power supplies, and follow the manufacturer's guidelines for flash programming and JTAG configuration. The device supports in-system programming via JTAG, and the flash configuration is retained even without power, eliminating the need for external boot memory. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P250-FGG144I in their designs.
A3P250-PQ208 - 250K Gate ProASIC3 FPGA | Microchip
The Microchip Technology A3P250-PQ208 is a 250,000-gate field-programmable gate array (FPGA) from the ProASIC3 family, housed in a 208-pin PQFP (Plastic Quad Flatpack) package with a 0.500 mm terminal pitch. It delivers a maximum system performance of 231 MHz (350 MHz internal clock) and operates from a 1.5 V core supply (1.425 V to 1.575 V range), fabricated on 130 nm flash-based CMOS technology. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement arbitrary digital logic functions. FPGAs belong to the programmable logic device (PLD) hierarchy, sitting above CPLDs in density and capability, and are used to prototype or implement digital systems without the cost and lead time of custom ASICs. The ProASIC3 family is a flash-based FPGA, meaning configuration is stored in non-volatile flash cells, providing instant-on operation, low power, and inherent security against reverse engineering. Key features of the A3P250-PQ208 include 6144 configurable logic blocks (CLBs), 151 user I/O pins, and 36,864 bits of RAM. The device supports a maximum clock frequency of 350 MHz and is offered in a 208-pin PQFP package, which is a surface-mount package with gull-wing leads on all four sides. The flash-based architecture eliminates the need for external configuration memory, simplifying board design and reducing total cost of ownership. Technically, the ProASIC3 core tile can be configured as either a three-input lookup table (LUT) equivalent or a D-flip-flop/latch with enable, a unique VersaTile capability that allows efficient use of the FPGA fabric. The device operates over a supply voltage range of 1.425 V to 1.575 V, with a nominal 1.5 V, and is available in both commercial and industrial temperature grades. The 130 nm process technology balances performance and power, making it suitable for a wide range of applications. Typical applications include industrial automation, automotive electronics, communications infrastructure, and consumer electronics. The A3P250-PQ208 is particularly well-suited for glue logic, bus interfacing, and control applications where its instant-on capability and security features are advantageous. Its 151 I/O pins provide ample connectivity for interfacing with microcontrollers, sensors, and other peripherals. When designing with this device, ensure that all power supply pins are properly decoupled with 0.1 uF and 10 uF capacitors, and follow the layout guidelines in the Microchip ProASIC3 handbook to minimize noise and ensure reliable operation. The flash-based configuration is non-volatile, so no external boot device is required, but careful attention to power sequencing is recommended. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a comprehensive resource for engineers evaluating the A3P250-PQ208.
A3P250-PQ208I - 250K Gate FPGA, 151 I/O | Microchip
The Microchip Technology A3P250-PQ208I is a ProASIC3 field-programmable gate array with 250,000 logic gates, 151 user I/O, and a maximum operating frequency of 231 MHz. It is manufactured using 130 nm technology, operates from a 1.5 V core supply, and is packaged in a 208-pin PQFP. The device combines programmable logic, embedded memory resources, and a broad collection of standard I/O interfaces in a single reconfigurable semiconductor package. A field-programmable gate array is a programmable digital logic device within the broader FPGA and semiconductor hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA can be configured after manufacture for logic, control, data acquisition, communications, or embedded processing functions. The ProASIC3 family combines this in-system reprogrammability with deterministic FPGA performance, nonvolatile configuration storage, and designs suited to compact embedded systems. The A3P250-PQ208I provides 250K equivalent logic gates, 151 I/O, and a 231 MHz maximum frequency. Its 130 nm fabrication process supports integration of logic cells, configurable memory, user I/O, clock-management resources, and embedded multipliers within one device. The 208-pin PQFP package also provides a large number of external connections, which is valuable for designs requiring substantial parallel data movement or multiple peripheral interfaces. ProASIC3 devices support reprogramming, which allows one physical board design to serve multiple firmware configurations or field updates. This is useful when product requirements evolve during development or when a deployed controller must be updated without replacing the hardware. Designers should still validate configuration storage, startup behavior, clocking, and I/O standards against their system requirements before production release. Typical uses include industrial control, data acquisition, communications gateways, embedded instrumentation, and general-purpose digital signal processing. The large 151-I/O count can simplify connections to sensors, converters, memory devices, display controllers, and communication transceivers. For designs operating near the device's upper frequency, printed-circuit-board signal integrity, clock routing, output loading, and power-supply integrity require careful attention. The primary design consideration is package and pin compatibility during migration. Microchip's ProASIC3 migration documentation identifies pin compatibility as a central issue when moving between devices of different logic densities, so engineers should verify every power, ground, configuration, clock, and user-I/O connection rather than assuming that a lower-density part is interchangeable. This product overview combines the manufacturer family information with distributor package and ordering records, supported replacement candidates, and engineering-focused migration guidance. It also distinguishes verified device attributes from parameters that require confirmation from the manufacturer datasheet, helping teams plan a ProASIC3 design without relying on incomplete catalog summaries.
A3P250-PQG100 - ProASIC3 FPGA, 250K Gates | Microchip
The Microchip Technology A3P250-PQG100 is a ProASIC3 flash-based Field Programmable Gate Array (FPGA) offering 250,000 system gates, 36,864 bits of RAM, and 68 user I/Os in a 100-pin PQFP (PQG100) package. It delivers system performance up to 350 MHz and is reprogrammable, providing a single-chip, low total cost of ownership solution for ultra-low-density applications. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. Unlike fixed-function ASICs, FPGAs contain programmable logic blocks and interconnects that can be wired to create custom circuits. The ProASIC3 family uses flash-based configuration, meaning the design is stored in non-volatile flash memory, allowing instant-on operation and secure IP protection without external boot memory. Key features of the A3P250-PQG100 include 250,000 system gates, 36,864 bits of RAM, 68 user I/Os, and support for up to 350 MHz system performance. It operates from a 1.5V core supply with 3.3V, 2.5V, and 1.8V I/O banks, and includes advanced features such as in-system programmability (ISP), JTAG boundary scan, and an abundance of advanced features for low total cost of ownership. The flash-based architecture provides inherent security against reverse engineering and supports single-chip operation without external configuration memory. The ProASIC3 architecture uses a proprietary VersaTile core that can be configured as either a three-input lookup table (LUT) equivalent or a D-flip-flop/latch with enable, enabling efficient use of the FPGA fabric. This third-generation flash architecture offers low power consumption, high reliability, and instant-on capability. The device supports up to 350 MHz system performance and includes dedicated phase-locked loops (PLLs) for clock management. Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics where low density, low power, and high security are required. The A3P250-PQG100 is particularly suited for glue logic, bus interfacing, and control plane functions in systems requiring reprogrammability without the cost of SRAM-based FPGAs. When designing with this device, ensure proper power supply decoupling with 0.1uF and 10uF capacitors on all power pins, and follow the recommended PCB layout guidelines in the datasheet for optimal signal integrity. The flash-based configuration eliminates the need for external boot memory, simplifying the BOM and reducing system cost. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P250-PQG100 in their designs.
A3P250-PQG208 - 250K Gate ProASIC3 FPGA, 208-PQFP | Microchip
The Microchip A3P250-PQG208 is a ProASIC3 flash-based Field Programmable Gate Array (FPGA) delivering 250K system gates with 36,864 bits of embedded SRAM and 151 user I/Os, packaged in a 208-pin Plastic Quad Flat Pack (PQFP/208-BFQFP) measuring 28 x 28 mm. Built on a non-volatile flash process, the device offers instant-on configuration in under 1 ms without an external boot PROM, and supports reprogramming in-system via JTAG or system-serial paths. The ProASIC3 architecture combines a versatile VersaTile element that can function as either a 3-input LUT or a D-flip-flop with enable, enabling efficient logic packing for state machines, datapath functions, and glue logic. What is an FPGA? A Field Programmable Gate Array is a reconfigurable semiconductor device that allows designers to implement arbitrary digital logic through programmable lookup tables, routing fabric, and I/O cells. FPGAs sit between ASICs (Application-Specific ICs) and microcontrollers in the design hierarchy: microcontrollers run software sequentially, ASICs implement fixed logic, while FPGAs execute parallel hardware-defined logic with sub-nanosecond deterministic timing. Within the broader taxonomy, an FPGA belongs to programmable logic devices (PLD), which also include CPLDs (Complex PLDs) - smaller, non-volatile, less I/O-rich parts. Key features of the A3P250-PQG208 include 6,144 VersaTiles, embedded FlashLock security for AES bitstream encryption, 1.5V core operation with multi-voltage I/O support (1.5V, 1.8V, 2.5V, 3.3V), and on-chip PLLs for clock management. The flash-based fabric eliminates the boot-configuration power surge typical of SRAM-based FPGAs, making it suitable for power-sequenced systems. Typical applications include industrial control and motor drive logic, telecom interface bridges, avionics and military secure systems, medical imaging preprocessing, automotive body electronics, and consumer video processing. The wide I/O count makes it useful for legacy system glue logic and parallel bus interfacing. When selecting the A3P250-PQG208, engineers should weigh its non-volatility and instant-on behavior against the higher per-unit cost of flash FPGAs versus SRAM-based equivalents. Its 208 PQFP footprint is also more accessible for hand-prototyping and rework than BGA variants.
A3P250-VQ100 - 250K-Gate ProASIC3 FPGA | Microchip Technology
The Microchip Technology A3P250-VQ100 is a 250,000-gate ProASIC3 flash field-programmable gate array with 68 I/O lines, 36,864 bits of block RAM, and a 100-pin TQFP package. It is a reprogrammable digital logic device intended for compact embedded systems requiring moderate gate density, user-programmable peripherals, and a small surface-mount footprint. The A3P250-VQ100 combines a single-chip implementation with flash configuration memory, allowing its logic design to be reprogrammed without a separate external configuration device. A field-programmable gate array is a semiconductor whose digital logic is defined after fabrication. An FPGA falls within the programmable-logic hierarchy, alongside complex programmable logic devices and programmable system-on-chip solutions. Unlike a fixed-function application-specific integrated circuit, the A3P250-VQ100 lets engineers implement control logic, interfaces, state machines, and data-processing functions in one reprogrammable device. Its flash-based configuration approach is useful when designs require field updates, low power after configuration, or a compact implementation without an external configuration PROM. Key characteristics include 250,000 logic gates, 68 I/O lines, and 36,864 total RAM bits. The device is offered in the VQ100 package, identified in product listings as a 100-pin TQFP package measuring 14 mm by 14 mm. ProASIC3 devices also support a broad range of embedded resources for combining logic and programmable peripherals in a single chip. These features allow the A3P250-VQ100 to consolidate functions that might otherwise require several programmable and fixed-function devices. The 68 available I/O lines provide connectivity to external sensors, converters, memories, communications transceivers, and human-interface circuitry. The 36,864-bit block RAM can support buffering, packet handling, status storage, data formatting, and other finite-state workloads. Designers should evaluate available I/O characteristics, supported clocking, memory access, and selected I/O standards against the intended board-level interfaces before finalizing a pin assignment. Typical uses include industrial control and factory automation, compact communications equipment, embedded instrumentation, and sensor-processing systems. In these applications, the FPGA can implement protocol conversion, timing control, data acquisition logic, and supervisory functions while keeping the bill of materials compact. Its reprogrammability also allows design revisions and field configuration updates without changing the PCB. PCB planning should preserve clean power and ground distribution around all 100 package leads, with particular attention to sensitive clock and I/O paths. Confirm the exact pin functions, supported I/O standards, configuration sequence, and decoupling requirements in the manufacturer datasheet before fabrication. For legacy industrial systems, the A3P250-VQ100 provides a useful migration target from smaller programmable logic devices while retaining a relatively small package.
A3P250-VQ100M - ProASIC3 FPGA 250K Gates | Microchip
The Microchip Technology A3P250-VQ100M is a ProASIC3 field-programmable gate array (FPGA) with 250,000 system gates, 3,000 logic elements, and 68 user I/Os, housed in a 100-pin VQFP (TQFP) package. It operates from a 1.5V core supply and supports system performance up to 231 MHz, making it a low-power, single-chip solution for a wide range of embedded applications. An FPGA (Field-Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence 'field-programmable'. FPGAs consist of an array of programmable logic blocks, interconnects, and I/O blocks, allowing them to implement complex digital logic functions. They sit between ASICs (application-specific integrated circuits) and microprocessors in the design hierarchy, offering the flexibility of software with the parallelism of hardware. The ProASIC3 family is known for its flash-based configuration, which is non-volatile, secure, and instant-on, unlike SRAM-based FPGAs that require external configuration memory. Key features of the A3P250-VQ100M include 250K system gates, 3,000 logic elements (3KLEs), 68 user I/Os, and 36,864 bits of RAM. The device supports multiple I/O standards, including LVCMOS, LVTTL, and PCI, and offers up to 231 MHz system performance. Its flash-based architecture provides inherent security against reverse engineering and supports live-at-power-up operation, eliminating the need for a boot configuration device. The 100-pin VQFP package is compact and suitable for space-constrained designs. Technically, the ProASIC3 family is built on a 130nm flash process, offering low power consumption and high reliability. The device includes programmable phase-locked loops (PLLs) for clock management, and supports boundary-scan testing via JTAG. The flash cells are reprogrammable, allowing in-system updates, and the device retains its configuration even when power is removed. This makes it ideal for applications requiring secure, non-volatile configuration. Typical applications include industrial control, automotive electronics, communications infrastructure, and aerospace/defense systems. The A3P250-VQ100M is particularly suited for glue logic, bus interfacing, and custom I/O expansion, where its 68 I/Os and 250K gates provide ample resources. Its low power and instant-on capability make it suitable for battery-powered and power-sensitive designs. When designing with this device, ensure proper decoupling of the 1.5V core supply and 3.3V I/O supply, and follow the layout guidelines in the datasheet for the VQFP package. The device supports multiple configuration modes, including JTAG and SPI, which should be selected based on the system requirements. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P250-VQ100M.
A3P250-VQ100T - ProASIC3 FPGA 250K Gates | Microchip
The Microchip Technology A3P250-VQ100T is a ProASIC3 family Field Programmable Gate Array (FPGA) with 250,000 system gates, 36,864 total RAM bits, and 68 user I/O lines, housed in a 100-pin VQFP (14x14 mm) package. It operates from a 1.425V to 1.575V core supply and is AEC-Q100 qualified for automotive applications, making it a robust choice for high-reliability embedded systems. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer after manufacturing to implement custom digital logic functions. FPGAs belong to the programmable logic device (PLD) family, which sits above CPLDs in complexity and below ASICs in customization. They are used to prototype and implement digital systems where flexibility, rapid time-to-market, and in-field updates are critical. The ProASIC3 family is a flash-based FPGA, meaning it retains its configuration without external boot memory, offering instant-on capability and enhanced security. Key features of the A3P250-VQ100T include 250K system gates, 36,864 bits of RAM, 68 user I/Os, and a maximum operating frequency of 231 MHz. The device supports multiple I/O standards including LVCMOS, LVTTL, and PCI, and includes on-chip PLLs for clock management. Its flash-based architecture provides low power consumption, high security against reverse engineering, and immunity to configuration bitstream corruption. The AEC-Q100 qualification ensures reliable operation across automotive temperature ranges and stringent quality standards. Technically, the ProASIC3 family uses a 130nm flash process, which enables a single-chip solution without external configuration memory. The device features up to 3 PLLs, 1K bits of flash user memory, and advanced clock conditioning circuits. The 100-VQFP package offers a compact footprint with 0.5mm pitch, suitable for space-constrained designs. The device supports JTAG (IEEE 1149.1) boundary scan for testing and in-system programming. Typical applications include automotive electronics such as motor control, infotainment, and ADAS interfaces; industrial automation for PLCs and motor drives; and communications systems for protocol bridging and signal conditioning. The A3P250-VQ100T is also used in medical devices, test equipment, and aerospace systems where reliability and long-term availability are essential. When designing with this device, ensure proper decoupling of the core supply (1.5V) and I/O banks (3.3V or 2.5V) with 0.1uF and 10uF capacitors. The flash-based architecture allows secure remote updates, but careful attention to power sequencing is required to avoid latch-up. Refer to the Microchip ProASIC3 handbook for detailed layout guidelines. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P250-VQ100T.
A3P250-VQG100M - ProASIC3 FPGA 250K Gates | Microchip
The Microchip Technology A3P250-VQG100M is a ProASIC3 Field Programmable Gate Array (FPGA) with 250K system gates, 68 user I/Os, and 36,864 bits of RAM, housed in a 100-pin VQFP package. It operates at a core voltage of 1.5V and supports system performance up to 231 MHz, making it a low-power, single-chip solution for a wide range of applications. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence "field-programmable." FPGAs consist of configurable logic blocks, programmable interconnects, and I/O blocks, allowing them to implement complex digital logic functions. They sit between ASICs (application-specific integrated circuits) and microprocessors in the hierarchy of programmable logic, offering the flexibility of software with the parallelism of hardware. The ProASIC3 family is a flash-based FPGA, meaning it is non-volatile and retains its configuration without external boot memory, simplifying system design and enhancing security. Key features of the A3P250-VQG100M include 250K system gates, 68 user I/Os, 36,864 bits of RAM, and a 1.5V core supply. It is based on 130nm flash technology, providing low power consumption and instant-on capability. The device supports up to 231 MHz system performance, making it suitable for high-speed logic applications. Its 100-pin VQFP package offers a compact footprint for space-constrained designs, and it is available in an automotive temperature grade (M suffix), ensuring reliable operation in harsh environments. Technically, the ProASIC3 architecture uses flash-based switch boxes that are programmed at the factory, eliminating the need for external configuration devices. This reduces system cost and board space while improving security against reverse engineering. The device includes dedicated phase-locked loops (PLLs) for clock management, and its I/Os support various standards including LVCMOS, LVTTL, and PCI. The 130nm process technology balances performance and power, making it an efficient choice for mid-density logic designs. Typical applications include industrial control, automotive electronics, communications infrastructure, and consumer electronics. In automotive systems, the A3P250-VQG100M's wide temperature range and reliability make it ideal for motor control, sensor interfacing, and in-vehicle networking. In industrial settings, it can be used for PLCs, robotics, and machine vision. Its low power and instant-on capability also suit battery-powered portable devices. When designing with this FPGA, consider the 1.5V core supply and ensure proper decoupling with 0.1uF and 10uF capacitors. The VQFP package requires careful PCB layout for thermal management, especially in high-temperature automotive environments. Use the Microchip Libero SoC design suite for configuration and programming. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the A3P250-VQG100M.
A3P250L-1PQG208I - ProASIC3L FPGA 250K Gates | Microsemi
The Microsemi (now Microchip Technology) A3P250L-1PQG208I is a low-power ProASIC3L family FPGA with 250,000 effective system gates, 36,864 bits of embedded flash memory-based RAM, 151 user-configurable I/O pins, and a 208-pin PQFP (28x28 mm) package rated for -40C to +100C junction temperature operation. A Field Programmable Gate Array (FPGA) is a semiconductor device containing a fabric of programmable logic blocks and interconnects that designers configure in the field, sitting in the programmable-logic hierarchy between CPLDs and high-density SoC FPGAs. The ProASIC3L subfamily distinguishes itself by using nonvolatile flash-based configuration storage, eliminating the external configuration PROM required by SRAM FPGAs and dramatically reducing boot time and system bill-of-materials cost. Key features of the A3P250L include 1.2V core operation for low static power, single-chip flash-based configuration with inherent SECDED-protected design security, 130nm process technology, support for up to 892.86 MHz internal performance figures reported by distributor parametric data, and industrial temperature grading denoted by the -I suffix. The flash fabric retains configuration through power cycles and is resistant to single-event upsets compared to SRAM-based alternatives, which is valuable in harsh environments. Architecturally, the device combines Versatile logic tiles, embedded SRAM blocks totaling 36 Kbits, and flexible I/O banks supporting multiple single-ended and differential standards. Microsemi Libero SoC design software supports synthesis, place-and-route, and simulation for the ProASIC3L family. Typical applications include industrial control and automation, aerospace and defense subsystems, medical instrumentation, communications bridging, and secure embedded controllers where instant-on operation and low power are required. Design consideration: because the core runs at 1.2V and I/O banks are separately powered, careful power-plane planning and decoupling are essential; also verify I/O bank voltage assignments early in Libero to avoid pin conflicts. This page synthesizes distributor inventory data, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.