بەرهەمەکان (46,000+)

WM9707SCFT/V - Stereo AC'97 Audio Codec | Cirrus Logic
WM9707SCFT/V

WM9707SCFT/V - Stereo AC'97 Audio Codec | Cirrus Logic

The Cirrus Logic WM9707SCFT/V is a stereo AC'97 revision 2.1 audio interface codec with one ADC, one DAC, 18-bit serial audio resolution, and S/PDIF output in a 48-pin 7 x 7 mm TQFP package. It combines analog audio conversion with digital AC'97 audio connectivity for legacy computer, communications, and embedded audio systems. An audio codec is an interface IC that converts analog sound into digital samples and digital audio streams into analog signals. The WM9707SCFT/V belongs to the AC'97 audio codec category within interface ICs and broader semiconductor signal-processing devices. Its digital interface supports communication between an audio codec and a host controller, while its analog inputs and outputs handle microphones, line-level sources, headphones, or powered speakers through external circuitry. The WM9707SCFT/V provides stereo conversion through one ADC and one DAC, with an 18-bit serial format identified in the product listing. It also includes S/PDIF output, allowing digital audio to leave the codec over a standardized digital interface. The 48-pin TQFP package provides the mixed-signal, digital-interface, clock, and power connections required for a complete stereo codec implementation. AC'97 revision 2.1 support makes this device relevant to legacy PC audio architectures, industrial control panels, embedded systems, and communications equipment that already use the AC'97 bus. Designers should treat clocking, analog grounding, input and output coupling, and digital signal return paths as central design considerations. Because the AC'97 interface is a mature architecture, it is most appropriate for new designs when its electrical and software compatibility have been confirmed against the complete system requirements. Typical uses include stereo line-input processing, microphone conditioning through external analog circuits, multimedia playback, industrial operator consoles, and embedded equipment that accepts an AC'97-compatible codec. The S/PDIF output can feed a downstream digital audio receiver, while the analog DAC output supports conventional amplified playback when paired with suitable output circuitry. A successful implementation requires stable analog and digital supplies, correct master-clock and bit-clock relationships, input and output filtering, and careful separation of analog and return currents. The component also requires PCB space for decoupling and signal routing around a 48-pin mixed-signal package. Confirm the complete pin-description table and application circuit in the manufacturer datasheet before assigning nets or making a board revision. This product page consolidates the identified codec architecture, package details, sourcing information, comparison points, and practical integration guidance. It emphasizes the verified AC'97, ADC, DAC, resolution, S/PDIF, and package characteristics that determine whether the WM9707SCFT/V fits an existing audio system.

RFQ پەیوەندی
WPC8763LDG - Embedded Controller IC QFP-128 | Winbond
WPC8763LDG

WPC8763LDG - Embedded Controller IC QFP-128 | Winbond

The Winbond Electronics WPC8763LDG is a specialized embedded controller (EC) integrated circuit supplied in a 128-pin QFP surface-mount package, designed primarily for notebook PC and mobile-system platform management applications such as keyboard scanning, power sequencing supervision, and thermal/fan control. An embedded controller is a specialized microcontroller that operates semi-independently of the host CPU to manage low-level platform functions. In the PC system hierarchy, the EC sits below the main CPU and chipset (PCH) as a power-management IC tier: it handles keyboard matrix scanning, battery charging supervision, thermal monitoring, fan speed control, and lid/power-button events, typically following Intel or AMD platform EC firmware specifications such as those used with ACPI and eSPI/KBC interfaces. The WPC8763LDG belongs to Winbond's WPC876x family of embedded controllers, which integrates an 8-bit or proprietary MCU core with on-chip flash/ROM program memory, keyboard controller (KBC) logic, GPIO, PWM channels for fan control, and ADC inputs for thermal and voltage monitoring. Key differentiating features of this family include the high GPIO count required for notebook keyboard matrices, integrated PWM fan controllers that reduce external component count, and low standby power consumption for battery-operated systems. The 128-pin QFP package provides sufficient I/O for a full notebook EC implementation on a single chip. Architecturally, EC devices like the WPC8763LDG combine a low-power MCU core, a shared RAM region, dedicated peripheral blocks (PS/2 keyboard interface, SMBus/I2C masters for battery and thermal IC communication, pulse-width modulators, and watchdog timers), and boot ROM. Firmware executes from internal non-volatile memory, and the EC communicates with the chipset over LPC or eSPI buses depending on platform generation. Typical applications include laptop and notebook motherboard EC functions, keyboard/mouse controller emulation (PS/2 KBC/Mouse), battery charging management in coordination with a charger IC, thermal and acoustic (fan) management, and general-purpose GPIO expansion in portable and industrial embedded systems. A key design consideration is firmware compatibility: the EC must run BIOS-coordinated firmware, so replacing this device requires both hardware pin compatibility and firmware/toolchain support - verify code image compatibility before any substitution. This page synthesizes distributor stock and pricing data, package information, and sourcing guidance not consolidated in the manufacturer's public datasheet listing.

RFQ پەیوەندی
WT:A - Micron 48Gb LPDDR4 SDRAM Mobile Memory | Micron
WT:A

WT:A - Micron 48Gb LPDDR4 SDRAM Mobile Memory | Micron

Micron Technology MT53E1536M32D4DT-046 WT:A is a 48 Gbit Mobile LPDDR4 SDRAM memory IC in the MT53E family, rated at 2.133 GHz and supplied in a 200-ball TFBGA. According to DigiKey listing data retrieved on 2026-10-09, the part is a Mobile LPDDR4 device intended for high-density, low-power system designs that require the bandwidth of LPDDR4 with the smallest possible PCB footprint. What is an LPDDR4 SDRAM? LPDDR4 (Low-Power Double Data Rate 4) is a JEDEC-standardized volatile memory category optimized for mobile and power-constrained applications. Compared with LPDDR3 and DDR3/DDR4, LPDDR4 uses a low-swing I/O interface (V<sub>DDQ</sub> typically 1.1 V), 2n-prefetch architecture, and deep power-down modes, positioning it within the broader mobile memory hierarchy: LPDDR4 -> SDRAM -> volatile memory -> memory IC -> semiconductor. LPDDR4 is the memory type used in virtually every high-end smartphone application processor, and is increasingly adopted in automotive infotainment, edge AI, and ultra-thin notebooks. Key features of this 48 Gbit MT53E1536M32D4DT-046 WT:A device include a 1536M x 32-bit logical organization, 2.133 GHz data rate per the -046 speed-bin suffix, and operation from a low-voltage core rail to maximize battery life. The 200-ball TFBGA package is thin-profile and thermally efficient, suiting space-limited mobile platforms. The device supports the standard LPDDR4 command set including multi-channel operation, low-power states (IDD2N, IDD3P, IDD6), and on-die temperature sensing. The architecture follows Micron's 1y-nm-class mobile DRAM process, enabling a high-density 48 Gbit monolithic die. Combined with the -046 speed grade, this delivers the throughput needed for multi-camera image pipelines, 4K video encode/decode buffers, and large neural network inference workloads running on the application processor. The wide 32-bit datapath keeps channel-count low, simplifying PCB routing on highly integrated SoCs. Typical applications include flagship smartphone application processors, ultra-thin notebook main memory, automotive infotainment platforms, edge AI inference accelerators, AR/VR headset compute modules, and embedded single-board computer platforms. The wide temperature support and small form factor make it attractive in any design that demands high memory density with low standby power. When designing with the MT53E1536M32D4DT-046 WT:A, ensure the host SoC's LPDDR4 PHY matches the 2.133 GHz speed bin to avoid down-training. Decoupling and PCB stack-up should follow the Micron LPDDR4 design guide, with controlled-impedance routing for the CA and DQ byte lanes and matched lengths within each byte group. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a one-line distributor listing.

RFQ پەیوەندی
X9313UST1 - 50kΩ 32-Tap Digital Potentiometer SOIC-8 | Renesas
X9313UST1

X9313UST1 - 50kΩ 32-Tap Digital Potentiometer SOIC-8 | Renesas

The Renesas X9313UST1 is a digitally controlled potentiometer (XDCP™) housed in an 8-pin SOIC package with a fixed end-to-end resistance of 50 kΩ and 32 resistive taps. It provides a single-channel, non-volatile, up/down wiper interface through three logic input pins (U/D, INC, CS) and stores the last wiper position through on-chip nonvolatile memory that retains setting across power cycles. The 32-tap resolution gives approximately 1.0% per-step resolution across the resistor array. Background context: a digital potentiometer (often abbreviated "digi-pot") is a solid-state, semiconductor replacement for a mechanical potentiometer or trim pot. Digi-pots sit within the broader data-acquisition and analog-signal-conditioning hierarchy, alongside DACs and digital rheostats, and they belong to the Renesas XDCP™ family. Unlike mechanical pots, they are programmable by host firmware, never wear from mechanical actuation, and ship in surface-mount packages suitable for reflow soldering and dense PCB layouts. Key features include a low 1 mA (typical) standby current, terminal voltages up to ±5 V across the resistor array, a 1.0% end-to-end resistance tolerance, and a wiper current rating up to approximately ±1 mA continuous, with peak surge handling to 10 mA. The 3-wire serial interface consumes only three MCU GPIO pins and is compatible with 5 V logic. The internal architecture pairs a polysilicon resistor array with CMOS wiper switches and a non-volatile memory cell that latches the last wiper position before power-down. Three control inputs (CS, INC, U/D) implement a step-and-direction interface: CS enables the chip, INC clocks each tap step, and U/D selects up or down direction. Power-on recall places the wiper on the stored value with deterministic behavior. Typical applications are audio volume/balance control, LCD contrast/brightness trimming, programmable voltage references, sensor calibration, and parameter-set storage where an MCU must hold a setting through power-down. Because the wiper retains state without external EEPROM, designers can eliminate a serial EEPROM and reduce BOM cost in many calibration circuits. When designing with the X9313UST1, respect the maximum terminal voltage (±5 V across the resistor terminals) and verify that pin 8 is correctly identified in PCB layout - the part is widely second-sourced and a small number of look-alike 8-pin digi-pots swap the GND and VL pin positions. Add a 0.1 µF decoupling capacitor close to the supply pin and confirm that CS is not allowed to float. This page combines the Renesas datasheet specifications, current distributor pricing, pin-compatible cross references, and practical layout notes not always covered in the original datasheet, providing engineers a single-page engineering brief for the X9313UST1.

RFQ پەیوەندی
XA2S200E-6FT256I - 200K Gate FPGA | AMD | 256-FTBGA
XA2S200E-6FT256I

XA2S200E-6FT256I - 200K Gate FPGA | AMD | 256-FTBGA

The AMD XA2S200E-6FT256I is a member of the Spartan-IIE XA family of Field Programmable Gate Arrays (FPGAs), designed for automotive and industrial applications requiring high performance, abundant logic resources, and a rich feature set at a low cost. This device provides 200,000 system gates, 5,292 logic cells, and 1,176 Configurable Logic Blocks (CLBs), operating from a nominal 1.8V supply. It is housed in a 256-ball FTBGA (17x17 mm) package with 182 user I/O pins. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence "field-programmable." FPGAs are part of the broader programmable logic device (PLD) family, which sits above ASICs in flexibility but below them in unit cost at high volume. The Spartan-IIE family is a superior alternative to mask-programmed ASICs, avoiding the initial cost, lengthy development cycles, and inherent risk of conventional ASICs. FPGA programmability permits design upgrades in the field with no hardware replacement necessary. Key features of the XA2S200E-6FT256I include 57,344 total RAM bits, support for 1.71V to 1.89V supply voltage, and a -40°C to 100°C junction temperature range. The device uses a 0.15-micron CMOS process and supports I/O standards including LVCMOS, LVTTL, and HSTL. The -6 speed grade indicates a maximum internal clock frequency of approximately 200 MHz, suitable for moderate-speed control and data processing tasks. Technically, the Spartan-IIE architecture combines a configurable logic fabric with block RAM and dedicated routing resources. The 256-ball FTBGA package provides excellent thermal and electrical performance, with a compact 17x17 mm footprint. The device is lead-free and RoHS compliant, meeting modern environmental standards. Typical applications include automotive infotainment, motor control, industrial networking, and test equipment. The 182 I/O pins allow flexible interfacing with sensors, ADCs, and communication transceivers. The wide temperature range and automotive qualification make it suitable for under-hood and harsh-environment deployments. When designing with this FPGA, ensure adequate decoupling on the 1.8V core supply and separate I/O supply rails. The device is now obsolete (EOL), so plan for last-time buy or consider pin-compatible alternatives for new designs.

RFQ پەیوەندی
XA3S1000-4FTG256Q - 1M Gate Automotive FPGA | AMD Xilinx
XA3S1000-4FTG256Q

XA3S1000-4FTG256Q - 1M Gate Automotive FPGA | AMD Xilinx

The AMD Xilinx XA3S1000-4FTG256Q is an automotive-grade Field Programmable Gate Array (FPGA) from the Spartan-3 XA family, designed for high-volume, cost-sensitive automotive electronic applications. It delivers 1,000,000 system gates, 17,280 logic cells, and 442,368 total RAM bits in a 256-ball FTBGA package. This device operates with a nominal supply voltage of 1.2V (range 1.14V to 1.26V) and supports 173 user I/O pins, making it suitable for a wide range of automotive control and interface tasks. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and a hierarchy of reconfigurable interconnects that allow the hardware to be reprogrammed to perform any digital logic function. The Spartan-3 XA family is specifically optimized for automotive applications, meeting the rigorous AEC-Q100 qualification standard for reliability across extended temperature ranges (-40°C to +125°C). Key features of the XA3S1000-4FTG256Q include its automotive qualification (AEC-Q100), 173 user I/O pins, 1920 Configurable Logic Blocks (CLBs), and 442,368 total RAM bits. The device is built on 90nm technology and supports a maximum operating frequency of 125MHz. The FTG256 package (256-ball FTBGA) provides a compact footprint suitable for space-constrained automotive PCBs while offering adequate thermal performance for the device's power dissipation. From a technical architecture perspective, the Spartan-3 XA family uses a 90nm process technology with a 1.2V core voltage, enabling low power consumption while maintaining high logic density. The device includes dedicated multipliers, block RAM, and digital clock managers (DCMs) that support complex digital designs. The automotive-grade variant ensures operation across the full -40°C to +125°C temperature range, making it reliable for under-hood and in-cabin automotive electronics. Typical applications include automotive infotainment systems, engine control units (ECUs), advanced driver-assistance systems (ADAS), and industrial motor control. The device's 173 I/O pins and 1M gate capacity make it ideal for glue logic, sensor interfacing, and display control in automotive environments. When designing with this device, ensure proper power supply decoupling with 0.1uF and 10uF capacitors placed close to the VCC pins. The 1.2V core supply must be clean and stable; consider using a dedicated LDO or DC-DC converter with adequate ripple rejection to maintain reliable FPGA operation.

RFQ پەیوەندی
XA3S100E-4TQG144Q - Automotive Spartan-3E FPGA | AMD Xilinx
XA3S100E-4TQG144Q

XA3S100E-4TQG144Q - Automotive Spartan-3E FPGA | AMD Xilinx

The AMD Xilinx XA3S100E-4TQG144Q is an automotive Spartan-3E FPGA with 100,000 equivalent system gates, 2,160 logic cells, 108 I/O, 572 MHz internal frequency, and a 144-pin TQFP package. It is designed for high-volume, cost-sensitive automotive electronics and is qualified for AEC-Q100 applications. The device uses 90 nm CMOS technology and operates over the extended -40°C to +125°C junction-temperature range for Q-grade parts. Its programmable architecture allows design upgrades without changing the PCB or replacing the device, making it suitable for automotive control, infotainment, gateway, sensor, and safety-adjacent systems. The target part is identified by the -4 speed grade and Q automotive temperature qualification. An FPGA is a programmable semiconductor device whose digital logic, interconnect, and embedded resources can be configured after fabrication. In the device hierarchy, an FPGA sits below programmable logic systems and above fixed-function ASICs, offering a middle ground between flexible development and the unit cost of a mask-programmed custom device. The Spartan-3E family combines configurable logic blocks, dedicated memory, digital clock management resources, and programmable I/O in a single package. Key features include 2,160 logic cells, 108 user I/O, a maximum internal frequency of 572 MHz, 90 nm CMOS implementation, and an AEC-Q100-qualified automotive profile. The -4 speed designation identifies the performance grade, while Q indicates the automotive temperature qualification. These characteristics make the XA3S100E-4TQG144Q useful where field programmability, controlled lifecycle qualification, and a moderate logic-resource requirement are more important than the very high capacity of larger FPGAs. The device is intended for embedded automotive electronics that require deterministic configuration, flexible I/O, and upgradeable control logic. Typical uses include body and chassis control modules, motor and valve controllers, sensor fusion front ends, gateway interfaces, instrument-cluster sub-systems, and auxiliary automotive controllers. The 108 I/O count supports connections to sensors, communication transceivers, display or diagnostic interfaces, and discrete actuators. Designers should account for the package's 144-pin TQFP footprint, power-decoupling requirements, configuration interface, clocking, I/O standards, and automotive environmental qualification. Use the manufacturer's pin-description table and device-specific power, configuration, and timing documentation when assigning PCB tracks and selecting bank power. The -4 speed grade and Q temperature grade should be preserved when the PCB is designed for replacement flexibility. This page combines the device's automotive FPGA specifications, qualified sourcing information, practical application guidance, and same-package replacement analysis to support engineering decisions from initial architecture through production sourcing. The Request a Quote form on this page can be used to confirm current availability, price, and lead time without relying on a static price table.

RFQ پەیوەندی
XA3S1500-4FGG676I - 1.5M Gate Automotive FPGA | AMD
XA3S1500-4FGG676I

XA3S1500-4FGG676I - 1.5M Gate Automotive FPGA | AMD

AMD XA3S1500-4FGG676I is an automotive Spartan-3 XA field-programmable gate array with 1,500,000 system gates, 29,952 configurable logic elements, 487 user I/O, and 589,824 bits of block RAM, housed in a 676-pin FBGA package. The device uses 90 nm fabrication technology and a 1.2 V core supply, combining a large programmable logic fabric with automotive-oriented product characteristics. A field-programmable gate array is a programmable semiconductor in which digital logic functions are configured after manufacture. A dedicated FPGA occupies the FPGA and CPLD category within programmable-logic semiconductors, while its internal resources include configurable logic blocks, block RAM, programmable input/output, and dedicated clock and power structures. This makes the XA3S1500 suitable when product-specific digital functions must be implemented in hardware without developing a custom ASIC. Key resources include 1,500,000 system gates, 29,952 logic cells, 487 user I/O, 589,824 bits of RAM, and 3,328 logic-related structures identified for this device. The 676-pin FBGA provides a high-density interface for automotive electronics requiring substantial parallel connectivity. Its -4 grade designation and I suffix identify the relevant XA Spartan-3 ordering configuration, while the 90 nm process and 1.2 V core represent the technology generation of the family. The Spartan-3 XA architecture places configurable logic and embedded memory within an FPGA fabric, allowing parallel datapaths, control logic, communication interfaces, and signal processing functions to be consolidated in one device. At 29,952 logic elements, the XA3S1500 offers substantially more capacity than small interface FPGAs while retaining the flexible in-system programming and field update characteristics associated with programmable logic. Typical automotive uses include body and comfort modules, vehicle networking, sensor aggregation, infotainment interfaces, powertrain control, instrumentation, and centralized gateway logic. The 487 available user I/O makes the device particularly useful where multiple external buses, sensors, actuators, or communication transceivers must be coordinated. Automotive designs must also account for qualification, operating-temperature, EMC, and functional-safety requirements at the system level. PCB implementation requires careful BGA layout, power-plane integrity, and decoupling because the 676-pin FBGA combines hundreds of signal connections with a 1.2 V core rail. Follow the manufacturer pinout and package-mechanical information when assigning balls, and validate high-speed interfaces, clock routing, configuration access, and power sequencing in the final PCB stack-up. This page organizes the XA3S1500-4FGG676I’s programmable resources, package characteristics, verified alternatives, and practical selection considerations. It also distinguishes package-compatible orderable variants from replacements that may differ in temperature grade, speed grade, qualification, or device marking.

RFQ پەیوەندی
XA3S1600E-4FG400I - 1.6M-Gate Automotive FPGA | AMD
XA3S1600E-4FG400I

XA3S1600E-4FG400I - 1.6M-Gate Automotive FPGA | AMD

The AMD XA3S1600E-4FG400I is an automotive Spartan-3E XA field-programmable gate array with 1,600,000 gates, 33,192 logic elements, 663,552 RAM bits, and 304 user I/O pins in a 400-ball BGA package. The -4 speed designation identifies its performance grade within the Spartan-3E family, while the XA prefix identifies the automotive-oriented family. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combines configurable logic blocks and block RAM, and provides a higher level of integration than multiple discrete logic devices. The Spartan-3E XA family targets cost-sensitive automotive electronics requiring deterministic logic resources, parallel I/O, and programmable system integration. The XA3S1600E-4FG400I provides 3,688 logic array blocks, also described as configurable logic blocks, with 33,192 logic elements and 663,552 total RAM bits. Its 304 user I/O pins support integration with automotive sensors, actuator controllers, body and comfort systems, communication interfaces, and electronic control units. A 400-ball BGA package also supports dense board routing and high I/O density. The architecture combines programmable logic fabric with dedicated memory resources, allowing parallel datapaths, protocol handling, state machines, and control functions to be consolidated in one device. The automotive XA family is intended for high-volume, cost-sensitive applications where integration reduces component count and simplifies PCB assembly. Exact operating-temperature, voltage, power, and configuration limits must be checked in the manufacturer datasheet for the installed grade. Typical uses include engine or transmission control modules, motor and valve drivers, vehicle networking, body-control modules, sensor fusion, and industrial automation equipment requiring high I/O density. The 304 available user I/O pins are particularly useful when multiple sensors, actuators, communication transceivers, and diagnostic signals must share one controller. PCB design should follow the manufacturer's ball-map, power, decoupling, configuration, and clocking guidelines. The 400-ball package demands careful escape-routing and multilayer-layer planning, while the automotive application requires attention to thermal margins, transient protection, and configuration-startup behavior. Confirm the exact design suffix and qualification requirements before releasing a production BOM. This page combines package, logic, RAM, and I/O details with replacement guidance and implementation-oriented design notes. It also distinguishes verified drop-in alternatives from lower-package-count devices that require a PCB redesign, helping engineers make faster sourcing and hardware decisions.

RFQ پەیوەندی
XA3S200-4PQG208I - Automotive Spartan-3 FPGA | AMD
XA3S200-4PQG208I

XA3S200-4PQG208I - Automotive Spartan-3 FPGA | AMD

AMD XA3S200-4PQG208I is an automotive-grade Spartan-3 XA field-programmable gate array with 200,000 system gates, 4,320 logic cells, 141 I/O, and a 208-pin PQFP package. The I-grade device supports an industrial junction-temperature range of -40°C to +100°C and is qualified to AEC-Q100. It combines programmable logic, block RAM, dedicated digital signal processing resources, and selectable I/O performance in a single FPGA package. An FPGA is a user-programmable semiconductor in the broader hierarchy of programmable logic devices, semiconductors, and digital integrated circuits. Unlike a fixed-function logic IC, an FPGA allows designers to implement parallel processing, control logic, interfaces, and signal-processing functions through a configurable digital architecture. The Spartan-3 family targets cost-sensitive designs requiring moderate logic density, flexible I/O, and integrated memory rather than the very high resource counts of a high-end FPGA. Key features include 4,320 logic cells, 141 available I/O, and support for seventeen single-ended I/O standards. The device also supports seven differential signal standards, including LVDS, and provides digitally controlled impedance termination. These resources allow one programmable device to consolidate multiple board functions while supporting common high-speed interfaces. The listed 622 Mb/s data-transfer rate per I/O indicates the performance class available when suitable standards and board implementations are used. The XA3S200-4PQG208I uses a 90 nm Spartan-3 FPGA architecture and is positioned for automotive electronic systems requiring higher reliability than conventional commercial devices. Its AEC-Q100 qualification and extended-temperature availability are important when the FPGA controls a safety-relevant or mission-critical function. Configuration data determines the implemented logic, so board-level programming, device handling, and verification practices remain essential parts of the design process. Typical applications include automotive body and chassis electronics, vehicle communication modules, engine or transmission control systems, industrial automation equipment, and compact embedded control platforms. The combination of 4,320 logic cells, 141 I/O, integrated block RAM, and mixed I/O standards is especially useful for controllers that collect sensor inputs, execute control algorithms, and communicate with external networks. PCB design should preserve the package footprint, power and ground distribution, decoupling requirements, configuration interface, and supported I/O standards of the Spartan-3 XA family. Differential pairs require controlled impedance and careful return-path planning. Designers should also account for the stated operating-temperature grade and verify the selected configuration method, system clocking, memory interfaces, and unused-pin treatment in the manufacturer documentation. This product page consolidates the exact package, logic-resource, I/O, temperature-grade, compliance, and interface information for XA3S200-4PQG208I. It also provides application guidance, package-oriented comparison details, and practical design notes to help engineers evaluate FPGA integration before requesting a quote.

RFQ پەیوەندی
XA3S200-4PQG208Q - 200K Automotive Spartan-3 FPGA | Xilinx
XA3S200-4PQG208Q

XA3S200-4PQG208Q - 200K Automotive Spartan-3 FPGA | Xilinx

The Xilinx XA3S200-4PQG208Q is an automotive Spartan-3 XA field-programmable gate array with 200,000 equivalent gates, 4,320 logic cells, 480 configurable logic blocks, and 141 user I/O pins. It is manufactured in 90 nm technology, operates from a 1.14 V to 1.26 V core supply, and is housed in a 208-pin PQFP surface-mount package. The device includes 221,184 bits of block RAM for configurable digital logic and signal-processing designs. A field-programmable gate array, or FPGA, is a programmable digital semiconductor containing configurable logic blocks, programmable interconnect, and input/output resources. Its hierarchy extends from an FPGA to a programmable logic device, then to a digital semiconductor and general-purpose integrated circuit. FPGAs are selected when design flexibility, parallel processing, hardware acceleration, or field updates are more valuable than the lower unit cost and predictable power of a fixed logic ASIC. The XA3S200-4PQG208Q provides 200,000 system gates, 4,320 logic elements, and 221,184 RAM bits in a single package. Its 141 user I/O pins support external interfaces and system connections, while the 90 nm process and 1.2 V nominal core voltage identify it as a Spartan-3 XA architecture. The automotive temperature grade and AEC-Q100 qualification distinguish this Q-suffix device for demanding automotive applications. The Spartan-3 XA architecture combines configurable logic, block RAM, dedicated digital signal-processing resources, and programmable I/O standards. A maximum clock frequency of 125 MHz is listed for the XA3S200 family, providing a useful performance reference for control, communication, sensor-processing, and embedded systems designs. Exact timing must be evaluated against the device-specific speed grade and the manufacturer datasheet before system timing closure. Typical uses include automotive body and chassis control, sensor conditioning, motor control, infotainment interfaces, gateway logic, and distributed electronic control units. The 141 I/O count and 221,184 RAM bits allow multiple external buses and parallel data paths to be implemented without adding a separate processor when the required logic fits within the FPGA resource limits. Use the manufacturer pin description table when assigning power, ground, configuration, clock, and user I/O connections. The automotive system should also account for the extended temperature grade, decoupling requirements, configuration startup behavior, signal-integrity rules, and AEC-Q100 qualification constraints listed for the device. This page consolidates the available XA3S200-4PQG208Q specifications, same-package alternatives, application guidance, comparison parameters, and practical design notes into an engineering-focused reference for FPGA designers, automotive electronics developers, and component sourcing teams.

RFQ پەیوەندی
XA3S200-4TQG144I - 4320-Logic-Cell Spartan-3 XA FPGA | AMD
XA3S200-4TQG144I

XA3S200-4TQG144I - 4320-Logic-Cell Spartan-3 XA FPGA | AMD

AMD XA3S200-4TQG144I is a Spartan-3 XA field-programmable gate array with 4,320 logic elements, 200,000 system gates, 216 kbit of embedded memory, and 97 user I/O in a 144-LQFP package. Designed for industrial-temperature programmable-logic applications, it combines configurable digital logic, embedded block RAM, and programmable I/O in a surface-mount package. The device operates from a 1.2 V core supply and supports I/O data rates up to 622 Mb/s per I/O. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and I/O can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, where it complements ASICs, microcontrollers, and DSP processors. Its parallel configurable resources allow multiple digital functions to be consolidated into one device, reducing component count while shortening development cycles for prototype and production systems. The XA3S200-4TQG144I provides 4,320 logic elements organized as 1,920 adaptive logic modules. Its 216 kbit of embedded block RAM supports data buffers, packet storage, lookup tables, and small local memories without external memory. The 97 available I/O give designers access to interfaces for control, communications, instrumentation, industrial control, embedded processing, and general-purpose digital interfaces. Its 144-LQFP package provides a standard gull-wing surface-mount footprint with 144 terminals. The Spartan-3 XA family targets automotive and industrial programmable-logic requirements while retaining the familiar Spartan-3 architecture. Its integrated I/O resources support seventeen single-ended signal standards, seven differential standards including LVDS, and digitally controlled impedance termination. These features are useful when a board must interface reliably to external logic, communications transceivers, sensors, or memory across varying signal-loading conditions. Typical designs include industrial controllers, data-acquisition systems, embedded communications gateways, video-processing pipelines, automotive electronic modules, and general embedded control platforms. The FPGA is particularly useful when parallel architecture, deterministic timing, configurable I/O, and field-updatable logic are more valuable than the low power and simplicity of a fixed-function microcontroller. Designers should use the AMD Spartan-3 XA product specification, pinout tables, and configuration guidance when assigning pins and selecting I/O standards. Validate signal-integrity and power-integrity requirements across temperature, voltage, and process corners, and confirm that board-level memory, clocking, configuration, and programming interfaces support the intended system architecture. This product summary combines package, resource, interface, comparison, and design information to simplify initial component selection while directing engineers to the authoritative AMD documentation for implementation details.

RFQ پەیوەندی
XA3S200-4TQG144Q - 200K Gate Automotive FPGA | AMD
XA3S200-4TQG144Q

XA3S200-4TQG144Q - 200K Gate Automotive FPGA | AMD

The AMD XA3S200-4TQG144Q is an automotive Spartan-3 XA field-programmable gate array with 200,000 system gates, 4,320 configurable logic elements, 221,184 bits of block RAM, and 97 configurable I/O in a 144-pin LQFP package. The device operates from a 1.2 V core supply, with a stated operating range of 1.14 V to 1.26 V. It is positioned for cost-sensitive automotive electronics requiring programmable logic, automotive qualification, and a compact surface-mount footprint. A field-programmable gate array is a semiconductor whose digital logic and interconnect are configured after manufacture. An FPGA sits within the programmable-logic hierarchy, combining configurable logic blocks, block RAM, programmable I/O, and dedicated arithmetic resources. This architecture allows automotive designers to consolidate control logic, interface adaptation, data acquisition, and protocol handling into one device while retaining field-update flexibility. The Spartan-3 XA implementation provides 4,320 logic elements organized as 1,920 adaptive logic modules, along with 221,184 bits of RAM. Published device information identifies 97 configurable I/O and a maximum data transfer rate of 622 Mb/s per I/O. The device supports seventeen single-ended and seven differential signal standards, including LVDS, and uses digitally controlled impedance for board-level signal control. These features make it useful where multiple logic functions and external interfaces would otherwise require several discrete devices. The XA3S200 family combines a 90 nm fabrication process with dedicated 18×18 multipliers and a 1.2 V core architecture. These resources support parallel data processing, sensor conditioning, display control, vehicle-network adaptation, and embedded control functions. Programming and configuration are managed through the Spartan-3 family programming interface, while the automotive suffix identifies the vehicle-oriented qualification grade. Typical automotive uses include body and comfort control modules, infotainment interface logic, central gateway adaptation, sensor aggregation, diagnostic circuitry, and industrial vehicle controls. The 144-pin gull-wing package supports conventional PCB assembly, while the combination of programmable logic, block RAM, multipliers, and differential I/O reduces component count in systems requiring several digital functions. Designers should preserve the device’s specified supply tolerance and provide appropriate decoupling for both core and I/O supplies. Configuration storage, startup sequencing, clocking, and automotive transient requirements must be reviewed in the manufacturer datasheet. PCB layout should also account for high-speed I/O, LVDS pairs, impedance control, and thermal performance rather than treating the package as a generic low-speed TQFP. This product page combines device specifications, package and sourcing details, qualified same-family drop-in alternatives, and practical guidance for automotive FPGA design. It also distinguishes verified electrical characteristics from parameters that require confirmation from the complete manufacturer datasheet before schematic release or production use.

RFQ پەیوەندی
XA3S50-4PQG208I - 50K-Gate Automotive Spartan-3A FPGA | Xilinx
XA3S50-4PQG208I

XA3S50-4PQG208I - 50K-Gate Automotive Spartan-3A FPGA | Xilinx

The Xilinx XA3S50-4PQG208I is an automotive Spartan-3A field-programmable gate array with 50,000 system gates, 1,728 logic elements, 124 user I/O, and 73,728 RAM bits in a 208-pin PQFP package. It operates from a 1.2 V core supply with 3.3 V I/O, uses 90 nm FPGA technology, and supports data rates up to 622 Mb/s per I/O. An FPGA is a programmable digital-logic device whose lookup tables, flip-flops, routing, block RAM, and I/O blocks are configured after manufacture. Within the semiconductor hierarchy, the XA3S50-4PQG208I is an FPGA and programmable-logic device. It sits between fixed-function logic and larger application-specific programmable arrays, allowing automotive and industrial designs to implement parallel processing, control, communication, and interface logic on one device. The device provides 192 configurable logic blocks, 124 user I/O, 73,728 RAM bits, and support for 17 single-ended and seven differential I/O standards, including LVDS. Digitally controlled termination supports signal-integrity control on suitable interfaces. The -4 speed designation identifies the device performance grade, while the I suffix identifies the supplied industrial-temperature configuration for demanding automotive and embedded environments. The Spartan-3A XA architecture combines programmable logic resources with automotive-oriented product construction. A 90 nm process supports a compact, cost-sensitive implementation, while the 208-pin PQFP exposes more I/O than smaller FPGA packages. The 1.2 V core and 3.3 V I/O arrangement separates the low-voltage internal logic supply from the higher-voltage external interface supply, allowing I/O standards to be selected according to board-level requirements. Typical uses include automotive body and chassis control modules, sensor aggregation, actuator control, gateway and communication logic, industrial automation controllers, and low-cost embedded signal-processing systems. The 124 I/O make the device useful for parallel sensor, control, communications, and debug interfaces, while 73,728 RAM bits support buffering, packet handling, and stateful control functions. Designers should verify the complete PQFP-208 footprint, pin assignments, supported I/O standards, configuration interface, clocking, power sequencing, and decoupling against the manufacturer datasheet. Because automotive qualification and deployment depend on the complete product qualification record, engineers must also validate the applicable certification evidence for their specific production program. This page combines the verified device specifications with practical selection guidance, sourcing context, package limitations, and clearly qualified replacement analysis. It distinguishes confirmed pin-compatible same-family options from unsupported cross-brand substitutions, helping engineers avoid assuming that a shared package alone guarantees a drop-in replacement.

RFQ پەیوەندی
XA3S50-4PQG208Q - 125 MHz Spartan-3 XA FPGA | AMD
XA3S50-4PQG208Q

XA3S50-4PQG208Q - 125 MHz Spartan-3 XA FPGA | AMD

The AMD XA3S50-4PQG208Q is a Spartan-3 XA field-programmable gate array with 50,000 system gates, 192 configurable logic blocks, 1,728 logic cells, and a maximum operating frequency of 125 MHz. The device provides 124 user I/O pins in a 208-pin PQFP package and operates from a 1.2 V supply. A field-programmable gate array is a semiconductor whose digital logic, memory, and I/O behavior are defined after manufacture through a configuration bitstream. Within the product hierarchy, the XA3S50-4PQG208Q is a Spartan-3 XA FPGA, combining configurable logic blocks, block RAM, programmable I/O standards, and dedicated configuration resources on one integrated device. This makes it useful when a fixed logic design must be updated without replacing the PCB. Key features include support for 17 single-ended I/O standards and seven differential standards, including LVDS. The advance product specification lists a maximum data-transfer rate of 622 Mb/s per I/O. Digitally controlled on-chip termination is also identified in the supplied specification data, helping reduce external termination components on suitable high-speed interfaces. The -4 speed designation corresponds to the verified 125 MHz maximum operating frequency. The device includes 73,728 bits of RAM, providing dedicated storage alongside the 1,728 logic cells. Its 124 user I/O pins provide substantial connectivity for control logic, data acquisition, communications, and general-purpose embedded processing. As an AEC-Q100-qualified automotive FPGA, it supports designs requiring a qualified programmable logic platform rather than a fixed-function controller. Typical uses include automotive body and chassis electronics, industrial control modules, data-acquisition equipment, communication gateways, and embedded control systems. The combination of 125 MHz operation, 124 I/O, 73,728 RAM bits, and broad I/O-standard support suits designs that interface multiple external signal domains while retaining field-updatable configuration. Designers should verify every voltage bank, I/O standard, clocking requirement, configuration interface, and power-budget assumption against the manufacturer datasheet before layout release. Because the supplied data does not provide a complete pin table, this page does not publish an inferred 208-pin mapping; use the manufacturer documentation for board-level implementation. This page consolidates verified distributor specifications, automotive qualification information, sourcing data, and selection guidance. It also distinguishes available same-family alternatives by package and qualification, while explicitly identifying missing technical details instead of estimating unpublished pinout, timing, or power values.

RFQ پەیوەندی
XA6SLX4-2CSG225I - 3840-Cell Automotive Spartan-6 FPGA
XA6SLX4-2CSG225I

XA6SLX4-2CSG225I - 3840-Cell Automotive Spartan-6 FPGA

The AMD XA6SLX4-2CSG225I is an automotive Spartan-6 LX XA field-programmable gate array with 3,840 logic cells, 132 user I/O, and a 225-ball CSBGA package. Designed for high-volume automotive applications, this 45 nm CMOS FPGA combines programmable logic, block RAM, and digital signal processing resources in a single integrated circuit. Its 1.2 V core voltage and automotive screening position it for embedded automotive control, vehicle networking, infotainment, sensor acquisition, and safety-oriented electronic systems. An FPGA is a programmable-logic semiconductor whose internal digital blocks can be configured after manufacture to implement counters, state machines, interfaces, signal processors, and control functions. In the product hierarchy, the XA6SLX4 belongs to the Spartan-6 LX family, which is a cost-optimized FPGA series for embedded and high-volume applications. Its 225-ball surface-mount package supports dense PCB integration while retaining a broad selection of programmable resources for parallel interface, control, and data-processing tasks. The XA6SLX4-2CSG225I provides 3,840 logic cells, 132 I/O, and 221,184 indicated logic resources in its published ordering description. Its 225-CSBGA package supports compact board layouts, while the 45 nm CMOS process provides the basis for an economical balance of capability, power, and cost. The XA prefix identifies the automotive Spartan-6 LX family, which is screened for automotive applications and includes AEC-Q100-qualified variants in the family. The -2 speed designation identifies the device performance grade used for timing-oriented design decisions. Engineers should use the complete Spartan-6 LX data sheet, configuration guidance, and package information when setting timing constraints, selecting I/O standards, and defining power budgets. The -2 grade is distinct from faster or slower ordering codes, so replacing it with another grade can affect timing margin even when the package and logic resources are identical. Typical automotive uses include body and chassis control, engine or transmission supervisory logic, vehicle bus gateways, sensor fusion, camera and radar interfaces, diagnostic systems, and centralized electronic control units. The 132 I/O count is particularly useful for systems that need substantial parallel connectivity alongside configurable logic. Suitable designs also require a compatible configuration solution, power sequencing, clocking, and automotive qualification of the complete electronic assembly. For layout, follow the manufacturer's ball map and BGA escape-routing guidance for the 225-CSBGA package. Keep power and ground distribution robust across the array, preserve the recommended decoupling structure, and route high-speed interfaces with controlled impedance. Review I/O drive strength, slew rate, and voltage tolerances against the attached automotive signals before finalizing the board design. This product page combines package, logic-resource, technology, compliance, and ordering-code details with application guidance, comparison criteria, and practical design notes. It also identifies same-footprint alternatives that require careful qualification review, particularly where automotive temperature grading or FPGA speed grade differs from the original device.

RFQ پەیوەندی
XA6SLX75-2CSG484Q - Automotive Spartan-6 LX FPGA | AMD
XA6SLX75-2CSG484Q

XA6SLX75-2CSG484Q - Automotive Spartan-6 LX FPGA | AMD

AMD XA6SLX75-2CSG484Q is an automotive-grade Spartan-6 LX field-programmable gate array built on 45 nm CMOS technology, with 74,637 logic cells, 328 I/O, a 1.2 V core supply, and a 484-FBGA CSPBGA package. The -2 suffix identifies the device speed grade, while the Q suffix identifies the automotive-qualified configuration. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic and I/O can be configured after fabrication. The Spartan-6 LX FPGA family combines programmable logic blocks, block RAM, dedicated DSP slices, and general-purpose I/O in a single package. This device family sits within the broader hierarchy of programmable logic devices, alongside CPLDs, and is commonly used where deterministic parallel processing, flexible interfaces, and product-upgrade flexibility are more important than the power efficiency of an ASIC. The XA6SLX75 configuration provides 74,637 logic cells and 328 I/O, making it suitable for consolidating multiple fixed-function sections into one programmable device. Its automotive designation supports applications requiring enhanced reliability and temperature qualification. The 484-FBGA CSPBGA package also exposes the high-density I/O required for communications, control, data acquisition, and industrial automation systems without requiring a larger board footprint than comparable high-pin-count alternatives. The 1.2 V core architecture supports modern FPGA power-management and configuration methods. Because this is a -2 speed-grade device, designs must be constrained with the correct timing models, and timing closure should be checked against the selected I/O standard, clocking architecture, and operating temperature. Spartan-6 devices rely on configuration data stored in external flash or loaded by a processor, so the complete design must include a valid bitstream, startup sequence, and configuration interface. Typical uses include automotive gateway and infotainment control, industrial instrumentation, motor-control supervisory logic, test equipment, and embedded control platforms. In an automotive controller, the FPGA can merge sensor conditioning logic, communication gateways, and safety monitoring while allowing firmware updates through configuration reload. In industrial systems, its parallel I/O can reduce the number of discrete interface components and shorten development cycles. PCB design should follow the AMD Spartan-6 package and pinout documentation, including the exact 484-ball land pattern, power-plane connections, decoupling requirements, and high-speed configuration constraints. Validate signal integrity for every transceiver or memory interface, preserve the required power and ground connectivity, and test bitstream loading across the complete voltage and temperature range before production release. This page consolidates device specifications, practical implementation guidance, comparison criteria, and verified sourcing information. It is intended to help engineers determine board compatibility, qualify the automotive-grade option, and plan a complete FPGA implementation without overlooking package-level or configuration-system constraints.

RFQ پەیوەندی
XA6SLX75-2FGG484I - 74,637-Cell Automotive FPGA | AMD
XA6SLX75-2FGG484I

XA6SLX75-2FGG484I - 74,637-Cell Automotive FPGA | AMD

The AMD XA6SLX75-2FGG484I is an automotive Spartan-6 LX field-programmable gate array with 74,637 logic cells, 280 I/O, a 1.2 V core supply, and a 484-pin FBGA package. It uses 45 nm CMOS technology and offers a -2 speed grade for automotive bridging, control, industrial automation, and system-integration designs. An FPGA is a programmable semiconductor in the logic-device hierarchy, combining configurable logic blocks, programmable I/O, memory resources, and clocking blocks on one device. Because its digital architecture is configured after manufacture, an FPGA can implement parallel control logic, protocol bridges, signal processing, and embedded interfaces without requiring a fixed application-specific ASIC. The Spartan-6 LX family occupies the middle ground between low-cost FPGAs and larger programmable-logic devices. The XA6SLX75-2FGG484I provides 5,831 configurable logic blocks, 74,637 logic cells, and up to 280 I/O according to the manufacturer product listing. Its 1.2 V core operation and 45 nm CMOS process support efficient implementation of automotive infotainment, networking, industrial control, and bridging functions. The -2 designation identifies the device speed grade, while the XA family suffix identifies the automotive-oriented XA Spartan-6 variant. The device is offered in a 23 mm by 23 mm FBGA-484 package with 1.0 mm pitch. A 667 MHz internal frequency value is associated with the corresponding Spartan-6 LX 484-ball family listing, while individual interface and memory performance depend on the selected I/O standards, clocking resources, design configuration, and operating conditions. This distinction matters because advertised device or memory frequency is not equivalent to application throughput. Typical uses include automotive infotainment and connectivity, industrial automation interfaces, data acquisition, display control, communications bridging, and embedded video-processing functions. The 280-I/O resource count gives a board designer substantial connectivity for external memories, transceivers, sensors, and mixed-signal interfaces. The automotive XA positioning is particularly relevant where operating-temperature qualification and product-lifecycle controls matter, but the exact temperature limits and qualification conditions must be confirmed in the device documentation. PCB implementation requires careful FBGA-484 layout practices, including a controlled ball-grid footprint, adequate power and ground distribution, and design rules for high-speed memory and interface routing. Differential and other sensitive signals should follow the device-family PCB guidelines. Since the package has 484 balls, a conventional two-dimensional symbol is impractical; use the manufacturer land pattern and pinout tables directly during schematic capture and PCB-library creation. This product page combines the key device identity, verified package and resource details, automotive qualification context, practical design guidance, and carefully qualified pin-compatible alternatives. The comparison information helps distinguish grade, speed, and package variants without treating every similarly named FPGA as an unconditional drop-in replacement.

RFQ پەیوەندی
XA6SLX75-2FGG484Q - Automotive Spartan-6 FPGA | AMD
XA6SLX75-2FGG484Q

XA6SLX75-2FGG484Q - Automotive Spartan-6 FPGA | AMD

The AMD XA6SLX75-2FGG484Q is an automotive Spartan-6 LX field-programmable gate array with 74,637 logic cells, 5,831 configurable logic blocks, and a maximum clock frequency of 667 MHz in a 484-ball FBGA package. It uses 45 nm CMOS technology, operates from a 1.2 V core supply, and provides 280 I/O for automotive control, communications, sensor processing, and safety-oriented electronic systems. A field-programmable gate array is a programmable digital logic device within the broader semiconductor and configurable-computing hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines programmable logic blocks, programmable interconnect, memory resources, and I/O blocks. After configuration, the XA6SLX75-2FGG484Q can implement parallel control logic, data acquisition paths, communication protocols, and signal-processing functions in one integrated device. The device provides 74,637 logic cells arranged as 5,831 CLBs, supporting a maximum clock frequency of 667 MHz. Its CLB combinatorial delay reaches 0.26 ns, making it useful for timing-sensitive automotive interface and control functions. The 280-I/O complement supports connections to sensors, transceivers, memories, and external controllers, while the 1.2 V core supply helps separate core and I/O supply planning. The XA6SLX75-2FGG484Q is associated with the XA Spartan-6 automotive family and AEC-Q100 qualification. Its 484-ball FBGA package uses a 1.00 mm terminal pitch and measures approximately 23 mm by 23 mm. These characteristics place the device in the BGA surface-mount package family and require careful PCB escape routing, via-in-pad or via-beneath-array decisions, and thermal-aware floorplanning. Typical uses include automotive gateway modules, body and chassis controllers, sensor-fusion front ends, brake or steering assistance electronics, industrial vehicle networks, and motor-control systems. Its combination of logic capacity, I/O density, and automotive qualification supports designs that require deterministic parallel processing, flexible interface adaptation, and field-programmable logic. PCB design should preserve high-speed signal integrity and provide a low-impedance power grid for the 1.2 V core. Decoupling capacitors should be distributed across the device rather than concentrated at one corner, while BGA escape traces should be matched as closely as practical. Configuration storage, programming access, and power-up behavior must also be designed against the manufacturer’s recommended reference circuit. This product overview combines the device’s key FPGA, package, electrical, automotive, and architectural characteristics with drop-in replacement guidance and practical design considerations for engineers evaluating the XA6SLX75-2FGG484Q.

RFQ پەیوەندی
XA6SLX75-3FGG484Q - 74,637-Cell Automotive FPGA | AMD
XA6SLX75-3FGG484Q

XA6SLX75-3FGG484Q - 74,637-Cell Automotive FPGA | AMD

The AMD XA6SLX75-3FGG484Q is an automotive Spartan-6 LX XA field-programmable gate array with 74,637 logic cells, 280 I/O, and a 1.2 V core supply in a 484-BBGA package. The -3 speed grade supports designs operating up to the manufacturer-defined performance target for this device family, while the XA prefix identifies its automotive-oriented product positioning. An FPGA is a semiconductor whose digital logic, interconnect, and I/O behavior can be configured after manufacture. A field-programmable gate array belongs to the broader programmable-logic hierarchy, combining configurable logic blocks, programmable routing, memory resources, and parallel I/O in one device. The Spartan-6 LX XA family targets automotive applications where programmable logic, integration, and functional safety considerations are important. The device provides 74,637 logic cells and 5,831 logic blocks according to the Microchip USA product listing. Its 280 I/O positions support interfaces to external processors, memory, sensors, communication transceivers, and automotive electronic control units. The device uses 45 nm CMOS technology and is identified as an AEC-Q100-qualified automotive FPGA. Additional operating and performance details should be confirmed in the manufacturer datasheet. The -3 suffix identifies the device speed grade, while FGG484 identifies the lead-free 484-ball BGA package. This ordering code also carries the extended-temperature automotive qualification associated with the XA family. Because the device uses a large BGA package, PCB construction must account for via-in-pad or via-under-bump requirements, thermal management, assembly profile, and the exact ball map defined by the manufacturer package drawing. Typical uses include automotive infotainment controllers, body and chassis control modules, sensor-fusion electronics, motor-control peripherals, communication gateways, and industrial systems requiring deterministic parallel I/O. The Spartan-6 architecture can consolidate protocol bridging, control logic, and interface functions into one programmable device while allowing firmware or bitstream updates across a product family. Design planning should start with the manufacturer pinout, package drawing, supported I/O standards, clock requirements, and power-supply recommendations. Confirm differential-signal topology, bank voltage compatibility, decoupling, configuration-scheme requirements, and thermal conditions before layout release. For automotive production, validate the assembled device, inspection criteria, traceability, and change-control process. This page combines exact catalog attributes, focused cross-reference options, application guidance, and design cautions to support a practical FPGA sourcing decision. It also distinguishes same-footprint replacement candidates from options that require careful qualification of speed grade, temperature grade, qualification status, and I/O behavior before use in an existing PCB design.

RFQ پەیوەندی
XA7A100T-1CSG324I - 101,440-Cell FPGA | AMD | Industrial Control
XA7A100T-1CSG324I

XA7A100T-1CSG324I - 101,440-Cell FPGA | AMD | Industrial Control

The AMD XA7A100T-1CSG324I is an Artix-7 XA field-programmable gate array with 101,440 logic cells, 210 I/O, and 4,976,640 RAM bits in a 324-ball CSPBGA package. It combines 7,925 configurable logic blocks, 28 nm FPGA technology, a 1 V core supply, and a 15 mm square package for compact industrial, communications, and embedded-control designs. The device also provides up to 208 MHz system performance and 6 ns pin-to-pin logic delays according to its published product listing. An FPGA is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture. Within the product hierarchy, the XA7A100T-1CSG324I is a field-programmable gate array, then an Artix-7 FPGA, and finally a programmable logic device used to implement parallel processing, control, signal processing, and hardware acceleration. Unlike fixed-function logic ICs, its configuration supports design changes without replacing the physical component. The principal resource figures are 101,440 logic cells, 4,976,640 RAM bits, 7,925 CLBs, and 210 I/O. This resource balance is suitable for protocol bridging, embedded control, industrial networking, test equipment, and moderate parallel-data pipelines. The CSG324 package places 324 solder balls on a compact 15 mm footprint, reducing board area while requiring careful escape routing, via-in-pad considerations, and assembly planning. The Artix-7 architecture combines programmable logic with dedicated memory resources and programmable I/O. Its 6 ns pin-to-pin logic delay and 208 MHz maximum published system frequency provide useful timing guidance for synchronous control and communication designs. Actual attainable frequency depends on the selected clocking resources, logic depth, I/O standard, routing congestion, speed grade, and timing constraints. Typical applications include industrial Ethernet gateways, programmable logic controllers, data-acquisition front ends, motor-control systems, and compact embedded instruments. The 210 available I/O support external memory, communications transceivers, sensors, and actuators, while the 4,976,640 RAM bits provide local storage for buffering, packet handling, and time-domain correlation. Design the PCB around the manufacturer's CSPBGA land pattern, power planes, decoupling network, configuration interface, and ball-assignment files. Treat the published 208 MHz frequency as a device-level reference rather than a guaranteed operating frequency, and complete timing analysis with the actual design and selected package files. Validate assembly process, via geometry, thermal performance, and programmed configuration before production release. This page combines device resource data, same-footprint Artix-7 alternatives, package considerations, and selection guidance for engineers evaluating the XA7A100T-1CSG324I. It also distinguishes exact drop-in options from alternatives whose package, temperature grade, speed grade, or qualification requirements must be checked before substitution.

RFQ پەیوەندی
XA7A100T-1FGG484I - 101440-Cell Artix-7 FPGA | AMD
XA7A100T-1FGG484I

XA7A100T-1FGG484I - 101440-Cell Artix-7 FPGA | AMD

The AMD XA7A100T-1FGG484I is an Artix-7 XA field-programmable gate array with 101,440 programmable logic cells, 285 I/O, 28 nm CMOS technology, and a 484-pin FCBGA package. The -1 speed grade targets performance-oriented designs, while the I suffix identifies the industrial temperature option. The device combines programmable logic, block RAM, digital signal processing resources, and programmable I/O in one high-density FPGA package. An FPGA is a reconfigurable digital semiconductor. Unlike a fixed-function application-specific integrated circuit, an FPGA allows logic, interfaces, and parallel processing functions to be loaded into the same device through a configuration bitstream. Artix-7 belongs to AMD's 7 Series FPGA hierarchy: FPGA, programmable logic, semiconductor, and embedded computing platform. It is intended for designs requiring substantial parallel processing, flexible I/O, or product-level field updates. The principal device characteristics are 101,440 logic cells, 285 I/O, a 28 nm process, and a 484-pin FCBGA package. This combination makes the XA7A100T suitable for embedded processing, industrial control, communications, instrumentation, and high-speed digital interface systems. The large I/O count supports connections to external memory, parallel sensors, converters, transceivers, and custom board-level interfaces. The -1 portion of the ordering code identifies the performance grade. The -484 suffix designates the 484-ball package, the G suffix identifies the package style, and the final I suffix identifies the industrial temperature grade. Design decisions should also account for the distinction between the XA7A100T device designation and related Artix-7 XC7A100T variants, particularly where ordering code, product status, or qualification requirements differ. A practical advantage of this FPGA is that one package can implement multiple control and datapath functions in parallel. A design can combine sensor acquisition, filtering, protocol conversion, timing, and host-interface logic while preserving a reconfigurable software update path. Resource sharing can reduce the number of surrounding devices, although configuration storage, clocking, memory interfaces, power planning, and PCB signal-integrity work remain essential. Before layout begins, use the official Artix-7 package pinout files to assign every ball, power rail, configuration signal, and I/O. A 484-pin FCBGA also requires a land pattern with controlled escape routing, via placement, and power-distribution-network geometry. Confirm the selected configuration memory, clock source, decoupling network, and bank voltages against the device pinout and design documentation. This product page combines the verified device identity, package, logic-cell count, I/O count, process technology, and sourcing information with practical selection guidance, compatibility notes, and design considerations. It helps engineers identify whether the XA7A100T-1FGG484I matches an Artix-7 design and what must be checked before adopting a related 7 Series ordering code.

RFQ پەیوەندی
XA7A100T-1FGG484Q - Automotive Artix-7 FPGA, 101K LE, 484-FCBGA | AMD
XA7A100T-1FGG484Q

XA7A100T-1FGG484Q - Automotive Artix-7 FPGA, 101K LE, 484-FCBGA | AMD

The AMD XA7A100T-1FGG484Q is an automotive-qualified Artix-7 XA Field-Programmable Gate Array (FPGA) with 101,440 logic cells, 4,976,640 system gates, and 4.75 Mbit of block RAM, housed in a 484-ball Fine-Pitch Chip-Scale BGA (FCBGA / FGG484) package. It integrates 15850 Adaptive Logic Modules (ALMs) and 285 user I/Os, supporting up to 4 transceivers at 6.25 Gb/s for high-speed serial links. An FPGA (Field-Programmable Gate Array) is a reconfigurable integrated circuit containing an array of programmable logic blocks, interconnect fabric, and dedicated silicon blocks (DSP, BRAM, transceivers, clock management) that designers program via HDL to implement custom digital logic, DSP pipelines, or interface bridges. FPGAs sit within the broader semiconductor hierarchy: programmable logic device -> logic IC -> integrated circuit -> semiconductor. The Artix-7 XA sub-family is AMD's automotive-temp (-40C to +125C) extension of the cost-optimized Artix-7 line, targeting AEC-Q100 Grade 2 qualified designs. Key features include 28 nm TSMC HPL process technology, 1.0 V core voltage (0.95 V Vccint option), support for DDR3-1066 memory interfaces, integrated PCIe Gen2 hard cores, and dedicated DSP48E1 slices for high-throughput arithmetic. The XA family adds automotive-grade qualification and extended temperature operation beyond the commercial XC7A100T. Architecturally, the device uses a 6-input LUT-based ALM fabric fed by a hierarchy of regional, horizontal, and clock backbone routing. 240 DSP48E1 slices deliver up to 528 GMACs of fixed or floating-point throughput at 28 nm, and integrated GTX transceivers support CPRI, 7-Series PCIe Gen2, and SRIO protocols up to 6.25 Gb/s. Typical applications include automotive driver-assistance (ADAS) sensor fusion, in-vehicle networking bridges (CAN/Ethernet/LIN), body-electronics controllers, infotainment video preprocessing, and industrial machine-vision pipelines. The XA prefix signals compliance with ISO 26262-relevant automotive design flows when used with the Vivado Design Suite. When designing with the XA7A100T-1FGG484Q, plan thermal dissipation for the 484-FCBGA (theta_JA around 14 C/W with proper airflow) and follow AMD UG475 pinout guidelines to avoid signal-integrity issues on GTX transceiver lanes. Use IBIS models and Vivado's power estimation before tape-out. This page synthesizes distributor pricing, drop-in pin-compatible alternatives from the same Artix-7 XA family, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
XA7A100T-2CSG324I - 101440-Cell FPGA | AMD | Industrial Control
XA7A100T-2CSG324I

XA7A100T-2CSG324I - 101440-Cell FPGA | AMD | Industrial Control

The AMD XA7A100T-2CSG324I is an Artix-7 XA field-programmable gate array built on 28 nm FPGA technology, with 101,440 logic cells, 210 user I/O, and 4,976,640 RAM bits in a 324-LFBGA CSPBGA package. It combines programmable logic, block RAM, digital signal processing resources, and programmable I/O in a single surface-mount device. An FPGA is a semiconductor whose digital circuits are configured after manufacture. In the device hierarchy, an FPGA sits below programmable logic and system-level programmable devices, while providing parallel configurable resources rather than a fixed instruction sequence. Artix-7 devices combine configurable logic blocks, programmable I/O, DSP resources, block RAM, clocking, and high-speed serial transceivers for embedded, industrial, communications, and test applications. The Artix-7 XA family provides 101,440 logic cells, 7,925 LABs/CLBs, 4,976,640 RAM bits, and 210 user I/O according to the manufacturer-related product information. The 324-LFBGA package reduces PCB footprint compared with larger packages, making the device suitable for compact modules and control systems. Its industrial -2 speed grade supports predictable performance across temperature-qualified industrial operating conditions. The architecture allows parallel data acquisition, protocol bridging, control-loop execution, image processing, and hardware acceleration without relying on a general-purpose processor for every operation. Dedicated RAM and DSP resources can handle buffering and fixed-point arithmetic, while the 210 available I/O support external interfaces and high-speed data paths. Designers should still verify timing, voltage requirements, pin constraints, and thermal performance for the complete design. Typical uses include industrial automation, camera and vision preprocessing, communications infrastructure, instrumentation, and embedded control. The large logic capacity supports multiple parallel channels, while the compact CSPBGA package makes dense systems possible when careful ball-out, assembly, and thermal management are required. The most important PCB consideration is power delivery around the large BGA package. Use the manufacturer package-pinout files and device power requirements to define plane splits, decoupling, and via placement. Confirm that the PCB stack-up, assembly process, and test access meet the requirements for a 324-ball device before committing to a board revision. This product page combines exact ordering information, package and resource details, drop-in replacement analysis, comparison parameters, and practical design guidance to support faster FPGA sourcing and hardware planning.

RFQ پەیوەندی