Amplifier ICs
بەرهەمەکان (3,200+)
0P-17A-883-AJ - Linear Microcircuit | Raytheon | Military Grade
The 0P-17A-883-AJ is a military-grade linear microcircuit manufactured by Raytheon, designed for high-reliability applications in aerospace and defense. It is a voltage-feedback operational amplifier that meets the stringent requirements of MIL-M-38510, ensuring performance and reliability in extreme environments. The part is also known as OP17AJ/883 and is listed under NSN 5962-01-130-1996. A linear microcircuit, specifically an operational amplifier, is an analog integrated circuit that amplifies the difference between two input voltages. It is a fundamental building block in analog signal processing, used in applications such as signal conditioning, filtering, and instrumentation. Operational amplifiers are part of the broader category of linear regulators and amplifiers, which are essential in power management and signal processing systems. Key features of the 0P-17A-883-AJ include its compliance with MIL-M-38510, a military specification for microcircuits, ensuring high reliability and quality. It operates over a wide temperature range, typically -55°C to +125°C, and is packaged in a hermetic ceramic package suitable for harsh environments. The device offers low offset voltage and high gain, making it suitable for precision analog applications. Technically, the OP17AJ/883 is a precision operational amplifier with a bipolar architecture, providing low noise and high stability. It is designed to operate from dual supplies, typically ±15V, and offers a high slew rate and bandwidth for its class. The device is manufactured by Precision Monolithics Inc. (PMI), which is known for high-performance analog ICs, and is now part of Analog Devices. Typical applications include military avionics, radar systems, and missile guidance, where reliability and performance are critical. The 0P-17A-883-AJ is also used in industrial and aerospace instrumentation, providing accurate signal amplification in harsh conditions. When designing with this component, ensure proper decoupling of power supplies and consider the thermal environment, as military-grade parts are often used in extreme conditions. The device is not recommended for new designs due to its obsolescence, but it remains available for legacy system maintenance.
0P07J-883-B - Military Grade Precision Op Amp | Maxim Integrated
The 0P07J-883-B is a military-grade precision operational amplifier manufactured by Maxim Integrated (originally Analog Devices). It is designed for high-accuracy analog signal conditioning in demanding environments, offering ultralow offset voltage and excellent long-term stability. The device is housed in a metal can package with 8 terminals in a round shape, suitable for through-hole mounting. It operates over the full military temperature range of -55°C to +125°C, ensuring reliable performance in aerospace, defense, and industrial applications. An operational amplifier (op-amp) is a high-gain voltage amplifier with differential inputs and a single-ended output. It is a fundamental building block in analog electronics, used in signal conditioning, filtering, instrumentation, and control systems. The op-amp's ability to amplify small differential signals while rejecting common-mode noise makes it essential in precision measurement and sensor interface circuits. Within the hierarchy of analog ICs, the op-amp belongs to the linear amplifier family, which also includes instrumentation amplifiers and comparators. Key features of the 0P07J-883-B include a maximum input offset voltage of 200 µV, a nominal common-mode rejection ratio (CMRR) of 123 dB, and a minimum slew rate of 0.1 V/µs. These specifications ensure high accuracy and stability in precision applications. The device also features low input bias current and low noise, making it suitable for high-impedance sensor interfaces. The military temperature grade and hermetic metal package provide robustness against harsh environmental conditions. Technically, the 0P07J-883-B is based on a bipolar process with laser-trimmed thin-film resistors, achieving ultralow offset voltage without external nulling. The internal compensation ensures unity-gain stability, simplifying design. The device operates from dual supplies up to ±22V, providing wide dynamic range. Its low power consumption and high CMRR make it ideal for bridge amplifiers, thermocouple conditioning, and precision voltage references. Typical applications include military avionics, satellite communication systems, precision test equipment, and industrial process control. The device's military-grade qualification ensures compliance with stringent reliability standards, making it a trusted choice for mission-critical systems. When designing with this op-amp, consider using a balanced input network to minimize offset errors and ensure proper bypassing of power supplies with 0.1 µF ceramic capacitors close to the pins. The metal can package requires careful handling to avoid damage to leads.
118 - Generic MPN Reference | Multiple Manufacturer Match
The XAIPART catalog number 118 is an ambiguous MPN identifier that returns multiple unrelated components from different manufacturers across multiple product categories, not a single canonical part. According to verified web search results dated 2026-10-06, the search query '118' resolves to components including the ADS-118MM 12-bit analog-to-digital converter from Datel (muRata), the TMP118 ±0.1°C accurate I²C digital temperature sensor from Texas Instruments in a 0.336 mm² wafer-level chip-scale package, the INA118U precision instrumentation amplifier from Texas Instruments in an 8-pin SOIC, the LM118H general-purpose operational amplifier from Texas Instruments in a TO-99-8 metal can, the 74LVC00AD,118 quad 2-input NAND gate from NXP Semiconductors, the AA118 0.5 A planar SCR from Microsemi Corporation, the BULK118 high-voltage fast-switching NPN power transistor from STMicroelectronics, and the AMD Virtex UltraScale+ VCU118 FPGA evaluation kit. Because '118' on its own is not a complete manufacturer part number (a complete MPN includes a manufacturer prefix, family, and suffix), distributors cannot resolve it to a single inventory SKU, and the XAIPART catalog does not host a product page for the bare string '118'. Background on MPN disambiguation: a manufacturer part number (MPN) is a unique alphanumeric identifier assigned by a semiconductor vendor to a specific die, package, and operating-grade variant. Standard MPN structure follows the pattern {PREFIX}{FAMILY}{SPEC}-{SUFFIX}, where prefix identifies the vendor (e.g. INA = TI instrumentation amplifier, ADS = Datel/Murata data converter, TMP = TI temperature sensor), family identifies the product line, and suffix encodes package, temperature grade, and tape-and-reel options. Bare numeric strings like '118' typically appear as either a SUFFIX (e.g. INA118U where '118' is the family code and 'U' is the 8-pin SOIC suffix) or as a partial catalog identifier. Engineers searching for a part should always specify the manufacturer prefix when querying '118' or similar short strings. A representative interpretation is the Texas Instruments INA118U, a low-power precision instrumentation amplifier with 70 kHz bandwidth, 50 nV/√Hz input voltage noise density, and 1.4 mA typical quiescent current, packaged in an 8-pin SOIC. The INA118U is widely used in bridge amplifier, ECG, weigh scale, and transducer signal-conditioning circuits where high common-mode rejection and low offset drift are required. Other plausible interpretations include the TMP118 ultra-small I²C temperature sensor for wearable and IoT designs, the 74LVC00AD,118 quad NAND gate for 3.3 V CMOS logic, and the BULK118 high-voltage switching transistor for offline power conversion. Each of these parts shares no functional compatibility - they cannot substitute for one another. Engineers should verify the manufacturer prefix and full MPN before substituting or cross-referencing. When designing with any of the '118' interpretations, always confirm the exact manufacturer prefix, family code, and package suffix against the original BOM line item and the manufacturer's product page. For example, INA118U (instrumentation amp, SOIC-8) is not a substitute for TMP118 (temperature sensor, WCSP-6) despite both containing the substring '118'. This page is a disambiguation reference, not a single-product datasheet. XAIPART does not list '118' as an orderable SKU; engineers are advised to search the full MPN (e.g. INA118U, TMP118, 74LVC00AD,118) on distributor portals for current stock and pricing.
ACPL-C790-500E - Precision Isolation Amplifier | Broadcom
The Broadcom ACPL-C790-500E is a precision miniature isolation amplifier designed for current and voltage sensing in electronic power converters, packaged in an 8-SO Stretched (SSO-8) outline with a 6.8 mm body width. It is part of the ACPL-C79B/C79A/C790 family and offers a differential output with a typical small-signal bandwidth of 200 kHz and an isolation voltage rating suitable for high-voltage power electronics applications. The device is supplied in tape-and-reel packaging (suffix -500E) and is intended for surface-mount assembly on standard FR-4 boards. An isolation amplifier is an active analog component that combines an input-side amplifier, an isolation barrier (typically optical), and an output-side amplifier in a single package. It allows a small analog signal to be measured on a high-voltage or safety-isolated node and output as a ground-referenced analog signal. The category sits within instrumentation amplifiers (in-amps) -> operational amplifiers -> linear ICs -> power management and signal chain semiconductors. Isolation amplifiers are essential where a controller must measure current or voltage on a high-voltage bus (motor drives, solar inverters, EV traction) without galvanic connection to the high-voltage domain. Key features include a precision optical coupling mechanism, internal reference and gain-setting, differential output topology, and industry-standard SSO-8 footprint for drop-in layout reuse. The part is qualified for industrial and renewable-energy converter applications and is broadly used as a precision alternative to Hall-effect current sensors in motor drive and UPS designs. From a technical standpoint, the ACPL-C790-500E uses an optical isolation barrier that delivers high common-mode rejection (CMRR) and stable gain over temperature, enabling accurate phase-current measurement for field-oriented control (FOC) loops in three-phase motor drives. Compared with shunt-resistor + Hall sensor combinations, the optical isolation amplifier achieves tighter gain tolerance and lower temperature drift. Typical applications include motor-drive phase current sensing, solar inverter DC-bus and string-current monitoring, uninterruptible power supply (UPS) current measurement, EV charging station current sensing, and industrial servo amplifier analog front-ends. When designing with the ACPL-C790-500E, ensure adequate PCB creepage and clearance at the package sides, place the input-side filter capacitor close to the input pins, and follow Broadcom's reference layout for SSO-8 isolation amplifiers. Proper high-voltage spacing and reinforced insulation traces are required to realize the rated isolation voltage. This page synthesizes distributor pricing, drop-in alternatives (including -Q1 and reel-packaging siblings), and practical design notes not found in the manufacturer datasheet alone, providing an SEO/GEO/AEO-optimized reference for engineers sourcing isolation amplifiers.
ACPL-C87BT-000E - Automotive Precision Isolation Amplifier | Broadcom
The Broadcom ACPL-C87BT-000E is an automotive-grade precision optically isolated amplifier designed for high-accuracy DC and AC voltage sensing across an isolation barrier. It integrates a sigma-delta (Σ-Δ) analog-to-digital converter, chopper-stabilized amplifiers, and a fully differential circuit topology in a stretched 8-pin SO (SO-8 Stretched) package, delivering ±1% gain accuracy, 100 kHz bandwidth, and 5 kV RMS isolation voltage. An isolation amplifier is a specialized analog isolation device that combines a high-impedance front-end, a galvanic isolation barrier (optical, magnetic, or capacitive), and an output stage that reconstructs a clean, isolated analog or bitstream signal proportional to the input. ACPL-C87AT/C87BT parts belong to the broader category of isolation amplifiers, sitting architecturally between shunt-resistor-based current-sensing chains and downstream ADCs, motor-control DSPs, or safety-monitoring MCUs. They solve ground-loop and high-common-mode-voltage problems in motor drives, battery management, and renewable-energy inverters. The ACPL-C87BT-000E features a 2 V linear input range with 1 GΩ input impedance (minimizing loading of high-impedance dividers), 15 kV/µs common-mode transient immunity (CMTI), and an active-high shutdown pin that cuts IDD1 to 15 µA. The sigma-delta modulator output stream can be filtered externally by an MCU's SINC³ decimation filter, or post-processed by a dedicated filter IC, enabling flexible resolution-versus-latency tuning. Single 5 V supply operation simplifies power-tree design. The device uses Broadcom's proven optical-coupling technology, where an LED emitter is modulated by the input differential amplifier and sensed by a photodiode receiver on the isolated side. Chopper stabilization cancels the amplifier's input offset drift over temperature, while the fully differential signal path provides excellent isolation-mode noise rejection in the harsh EMI environments of IGBT bridge circuits. Typical applications include isolated DC-bus voltage sensing in motor drives, battery-pack voltage monitoring in EV/HEV battery management systems (BMS), solar inverter string-voltage telemetry, and isolated analog front-ends in industrial PLCs. Designers select this part when system-safety isolation (reinforced) is mandated by IEC 61800-5-1 or UL 1577. Key design considerations include the external clocking requirement for the sigma-delta modulator, LED-current-setting resistor calculation (RLED), and the trade-off between decimation-filter order and output settling time. Decimation order SINC³ with a 10 MHz modulator clock and 256 oversample ratio yields an effective 39 kHz output rate with 14-bit ENOB. This page synthesizes distributor pricing, same-package alternatives (ACPL-C87AT-000E, ACPL-C87B-500E), cross-brand references (TI AMC1311), and practical design notes not consolidated on the manufacturer datasheet or typical distributor listings.
AD22424Z - Analog Devices Integrated Circuit | Military Grade
The Analog Devices AD22424Z is an integrated circuit from Analog Devices Inc., offered as part of the company's broader data-conversion and signal-conditioning catalog. Verified web search results from DigiKey, Octopart, and Win Source list the AD22424Z in the Data Acquisition category as an Analog Devices mixed-signal IC; the '-Z' designator in ADI's part numbering convention indicates a MIL-STD-883 screened (military) or DESC-listed processing flow. The part is listed under the Analog Devices Data Acquisition / Data Conversion taxonomy on distributor sites. What is a MIL-STD-883 screened integrated circuit? MIL-STD-883 is a US Department of Defense test method standard that defines mechanical and environmental tests (temperature cycling, hermeticity, shock, vibration, burn-in) for microelectronic devices intended for military and aerospace use. The '-Z' suffix on ADI's older analog part numbers historically indicates a DESC drawing (Standardized Military Drawing - SMD) qualification, meaning the part is built and tested to a controlled MIL-qualified baseline. These parts are typically specified for long-life defense programs where traceability, hermeticity, and -55°C to +125°C operation are mandatory. The AD22424Z fits this hypernym: integrated circuit -> mixed-signal IC -> MIL-STD-883 qualified IC. From the verified web data, the part is broadly categorized under Analog Devices' Data Acquisition / Data Conversion product family. Exact parametric values such as resolution, sampling rate, and supply voltage are not present in the search snippets returned; these require verification against the official manufacturer datasheet. Distributors including DigiKey, Octopart, and Win Source list pricing and stock for the part. Typical applications for MIL-STD-883 screened mixed-signal ICs include avionics flight-control instrumentation, shipboard sensor signal conditioning, military radar receiver channels, downhole oil-and-gas telemetry, and radiation-tolerant (rad-hard by process) satellite payload electronics. The hermetic package and extended temperature range also suit industrial process control and railway signaling where long-term reliability is required. The part's lifecycle status is listed as Obsolete by some downstream distributor inventory feeds. Designers should verify last-time-buy and PCN/EOL notices directly with Analog Devices before placing new orders, and consider the AD-RHA series as alternatives for new designs. This page combines verified distributor listing data with practical sourcing guidance and design considerations specific to MIL-STD-883 ICs - information not consolidated in any single manufacturer or distributor page.
AD503JH - JFET Operational Amplifier | Analog Devices
The Analog Devices AD503JH is a JFET-input operational amplifier associated with precision instrumentation and low-level signal-conditioning applications. The device is offered by Analog Devices under the AD503 family designation, with the AD503JH identifying the specific orderable configuration. It is available in a JFET-input package, and product listings classify it as an instrumentation, operational-amplifier, or buffer-amplifier device. An operational amplifier is an active analog component that uses high-gain differential amplification to control the voltage at its output. The JFET-input designation identifies the transistor technology used at the input stage. JFET input amplifiers are commonly associated with high input impedance and low input-bias current, making them useful when measuring signals from sensors, transducers, photodetectors, and other sources that can be disturbed by excessive input current. Their role within an instrumentation chain is to amplify a small voltage while preserving signal integrity. The AD503 family is intended for analog signal paths where input impedance and bias-current behavior are important design considerations. Unlike an instrumentation amplifier, a general-purpose operational amplifier is normally configured with external feedback components. This allows the engineer to set closed-loop gain, bandwidth, and signal termination according to the source impedance and required measurement bandwidth. The device should not be assumed to have rail-to-rail input or output capability unless the manufacturer documentation confirms those characteristics for the exact AD503JH configuration. A low-noise JFET input stage can be advantageous in transducer interfaces because the input circuit presents a light load to the source. Practical performance still depends on clean resistor layout, suitable bypass capacitors, controlled source impedance, and attention to offset and drift over the intended temperature range. When the source contains substantial capacitance or the required closed-loop gain is high, the complete amplifier and feedback network must be checked for stability rather than relying only on nominal device descriptions. Typical AD503JH uses include low-level sensor conditioning, instrumentation front ends, precision buffering, laboratory measurement systems, and analog signal-processing modules. The amplifier may also appear in designs requiring offset, drift, or noise performance beyond that of a general-purpose bipolar-input amplifier. Its input-stage characteristics are particularly relevant when the source impedance is high or the sensor must remain effectively unloaded during measurement. For a new design, verify the exact supply-voltage limits, input common-mode range, output swing, offset voltage, input-bias current, noise density, gain-bandwidth product, stability requirements, and package dimensions in the Analog Devices documentation before layout release. Input and output bypassing, feedback resistor matching, grounding, and guard techniques can materially affect measured precision. The package and pin assignment must also be confirmed from the ordering information because the JH suffix alone does not describe a complete footprint. This product record combines the exact AD503JH market identity, verified manufacturer-family context, sourcing attributes, and engineering guidance. It distinguishes documented facts from parameters that require confirmation in the official device documentation, helping engineers qualify the amplifier systematically before committing to a PCB layout or production release.
AD504LH - 500 uV Offset Precision Op Amp | Analog Devices
The Analog Devices AD504LH is a single-circuit precision operational amplifier with a low input offset voltage of 500 uV, common-mode rejection ratio of 120 dB, and unity-gain bandwidth of 300 kHz. It is supplied in a round TO-99 metal-can package with 8 wire terminals and is identified as a commercial-grade, general-purpose instrumentation amplifier. An operational amplifier is a voltage-feedback analog integrated circuit used to amplify differences between two input signals while rejecting common-mode noise and maintaining high input impedance. The AD504 belongs to the precision operational amplifier category, within the broader amplifier IC and analog signal-conditioning hierarchy. Its precision characteristics make it useful when the difference between two small voltages must be measured or amplified accurately. The 500 uV input offset specification is the headline accuracy parameter for the AD504LH. Offset voltage represents the output error produced when the two input voltages are equal, so a lower value reduces the need for calibration in precision measurement paths. The stated 120 dB CMRR indicates strong rejection of signals common to both inputs, which is valuable when a sensor output is small relative to the voltage applied to the sensor or instrumentation chain. The 300 kHz unity-gain bandwidth supports signal amplification where the required closed-loop bandwidth remains below the amplifier's gain-bandwidth limit. The AD504LH is specified for a 15 V supply in the product listing data. The TO-99 package is a hermetically sealed metal-can format commonly associated with older precision and military-qualified analog devices. Its 8 wire terminals and round package differ materially from modern surface-mount op amps, so a replacement must match the mechanical footprint, terminal arrangement, supply requirements, and electrical performance. The manufacturer lists the AD504 product as obsolete, making lifecycle status an important qualification consideration for new designs. Typical uses include laboratory instrumentation, low-level sensor amplification, precision bridge or strain-gauge signal conditioning, and analog measurement systems where offset and common-mode performance are more important than wide bandwidth or a modern surface-mount footprint. The AD504LH can be considered where a through-hole metal-can amplifier is mechanically required and where an obsolete lifecycle status is acceptable. Designers should confirm the pinout, supply-voltage limits, offset and bias-current behavior, noise specifications, and temperature range against the Analog Devices AD504 datasheet before layout or replacement work. Because the TO-99 package is not represented in the package-diagram library used by this page, the pin drawing should be taken directly from the manufacturer datasheet rather than inferred from the round package outline.
AD504MH - 0.3 MHz Military Op Amp | Analog Devices
The Analog Devices AD504MH is a single general-purpose operational amplifier with a maximum offset voltage of 500 uV, a 0.3 MHz gain-bandwidth product, and an 18 V supply rating. It is packaged in a hermetically sealed, round 8-pin TO-99 metal package with wire terminals, making it suited to military-grade and precision analog signal-conditioning equipment. An operational amplifier is an active semiconductor device that amplifies the difference between two input voltages. Within the broader hierarchy of an op amp, analog amplifier, voltage amplifier, and semiconductor, the AD504MH provides high open-loop gain, differential input capability, and an output stage suitable for low-frequency precision control systems. Its general-purpose architecture allows it to support feedback-based signal conditioning without a fixed internal application. The AD504MH's headline characteristics include a 500 uV maximum input offset voltage, a 0.3 MHz bandwidth, an 18 V maximum supply rating, and a nominal slew rate of 0.12 V/us. The offset specification supports accurate DC amplification, while the 0.3 MHz bandwidth identifies the device as a low-frequency amplifier rather than a high-speed signal-conditioning component. The hermetic TO-99 construction supports use in environments where mechanical protection and stable electrical performance are important. This older military-grade amplifier is used for precision DC amplification, feedback control, instrumentation, low-frequency filter stages, and signal conversion. Its 0.12 V/us slew rate limits large-signal response, so applications should avoid demanding full-bandwidth operation or fast pulse reproduction. Input and output timing should also be checked against the 0.3 MHz bandwidth rather than the much higher open-loop gain available at low frequencies. Typical circuit roles include amplifier stages in test and measurement systems, sensor-signal conditioning, servo or feedback control, analog reference systems, and low-frequency active filters. The single-amplifier configuration permits direct implementation of inverting, non-inverting, differential, and comparator-style arrangements when the system operating conditions support them. The 8-pin metal-can package also offers a mechanically robust alternative to modern plastic packages. Circuit implementation requires attention to supply decoupling, input common-mode range, output swing, bias-current effects, and stability with the selected feedback network. Place suitable bypass capacitance close to the supply pins, keep feedback-loop routing compact, and verify loop gain against the amplifier's frequency response. Because this is a hermetically sealed TO-99 device, lead bending and soldering should use procedures suited to metal packages. This product record consolidates the AD504MH's confirmed electrical and mechanical characteristics, sourcing information, package details, and application-oriented engineering guidance. It also distinguishes confirmed ratings from parameters that require consultation of the manufacturer datasheet before release of a production design.
AD504SH - 300 kHz Precision Op Amp | Analog Devices
Analog Devices AD504SH is an obsolete, single-amplifier precision operational amplifier with a maximum offset voltage of 500 uV, nominal unity-gain bandwidth of 300 kHz, and nominal common-mode rejection ratio of 120 dB. It is packaged in an hermetically sealed, round TO-99-8 metal-can package with eight wire terminals. The operating temperature range extends from -55 C to +125 C, supporting military and industrial signal-conditioning equipment. An operational amplifier is a voltage-feedback amplifier that uses differential input voltage to control an output voltage. The AD504SH belongs to the general-purpose operational-amplifier hierarchy, where precision offset, common-mode rejection, low supply current, and stable unity-gain behavior are important for sensors, instrumentation, and low-level analog signals. Its 1.5 mA supply-current specification places it in the low-power segment of the AD504 family. The most prominent characteristics are the 300 kHz unity-gain bandwidth, 120 dB nominal common-mode rejection ratio, 500 uV maximum input offset voltage, and approximately 25 mA typical output-current capability. These ratings make the device suitable for signal paths requiring moderate bandwidth rather than high-speed waveform processing. The 120 dB CMRR helps reject common-mode interference, while the offset limit supports precision measurements when appropriately calibrated. The AD504SH uses a conventional eight-terminal metal-can package and is listed with bipolar input characteristics. Its 300 kHz nominal unity-gain bandwidth is suitable for low-frequency precision loops and moderate-bandwidth signal amplification. Because the device is obsolete and specified in a hermetically sealed TO-99-8 package, it is principally relevant to maintenance, repair, and legacy-system replication rather than new high-volume surface-mount designs. Typical uses include bridge-amplifier interfaces for resistive sensors, precision current measurement, low-level instrumentation, data acquisition front ends, and military-grade test equipment. In these applications, the AD504SH can amplify a small differential signal while rejecting common-mode voltage and limiting the bias current drawn from the supply. The -55 C to +125 C temperature range supports harsh environmental equipment when appropriate derating and screening are used. Designers should follow the manufacturer's obsolete datasheet for the complete pin description, supply limits, electrical characteristics, and military qualification information. Stable operation requires adequate supply voltage, suitable output-voltage headroom, and decoupling close to the supply terminals. Existing TO-99 layouts must preserve the original lead numbering and metal-can orientation because the package is not surface mount. This product page consolidates the obsolete-product status, key electrical ratings, package details, sourcing information, and documented AD504 family alternatives. It also distinguishes the standard AD504SH from screened AD504SH/883 and AD504SH/883B variants so engineers can select a replacement or heritage-order component without changing the TO-99-8 footprint.
AD506JH - Low-Noise JFET Op Amp, TO-99-8 | Analog Devices
The Analog Devices AD506JH is a single, precision JFET-input operational amplifier in an 8-lead TO-99-8 metal-can package. It operates from a 10 V to 40 V supply span, supports an operating temperature range of -55 °C to 125 °C, and provides one amplifier circuit per package. The hermetic metal-can construction and wide operating range make the AD506JH suitable for precision analog signal chains where stable operation across temperature and relatively low input noise are important. A JFET-input operational amplifier is a voltage-amplifier type whose input stage uses junction field-effect transistors rather than bipolar transistors. Within the signal-chain hierarchy, the AD506JH belongs to the operational-amplifier family, where it sits between passive sensors and analog-to-digital converters, active filters, instrumentation amplifiers, and laboratory measurement equipment. JFET inputs are valued for high input impedance and low bias currents when working with high-impedance sources. The key features of the AD506JH include a JFET input stage, a single-amplifier configuration, a 10 V to 40 V operating supply span, and a -55 °C to 125 °C temperature range. Its TO-99-8 package is a through-hole metal can with a package pitch that differs from modern surface-mount op amps. Designers should therefore treat the AD506JH as a heritage-style precision amplifier rather than a drop-in choice for an 8-pin dual op-amp footprint. Because the AD506JH operates from a minimum supply of 10 V, it is intended for split-supply or higher-voltage analog systems rather than 3.3 V or 5 V rail operation. The metal-can package also limits the practicality of high-volume automated assembly when compared with SOIC, TSSOP, or QFN alternatives. Nevertheless, the package supports conventional through-hole insertion and is useful in laboratory, industrial, and legacy control equipment where long service life and temperature stability are more important than board area. Typical uses include precision current-to-voltage conversion, low-level sensor amplification, active filtering, bridge-sensor signal conditioning, and instrumentation front ends. The wide supply range allows the amplifier to operate from a 24 V industrial rail, while its low-noise JFET input stage is appropriate for sources with high source impedance. Offset-voltage, input-bias-current, input-voltage-noise, and open-loop-gain values should be confirmed in the manufacturer datasheet before setting gain or bias networks. The main design consideration is the supply headroom required by the output stage. Feedback networks should use stable, low-temperature-coefficient resistors, and the unused amplifier positions are not applicable because the package contains only one amplifier. Keep sensitive input traces short, protect the input nodes from leakage and contamination, and use adequate bypassing between the supply pins and the common terminal according to the datasheet recommendations. This page combines the AD506JH package, supply, temperature, and circuit configuration with practical guidance on high-impedance sensing, legacy through-hole layout, and component selection. It also distinguishes true same-family replacements from modern op amps that share a pin count but not a footprint or electrical architecture.
AD506KH - Low-Offset JFET Op Amp | Analog Devices | TO-99-8
The Analog Devices AD506KH is a single-circuit JFET-input operational amplifier packaged in an 8-lead TO-99 metal can. It is intended for instrumentation and low-frequency signal-conditioning applications where a JFET input stage and an offset voltage of no more than 1500 µV provide useful input and DC accuracy characteristics. The part is offered in a round, 8-terminal package identified as TO-99-8. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The JFET-input topology places the AD506KH in the amplifier family traditionally selected for instrumentation, buffer, and high-impedance signal paths. Within the broader semiconductor hierarchy, the AD506KH is an integrated circuit, an analog amplifier, and specifically a single-amplifier operational amplifier rather than a comparator, reference, or power-management device. The AD506KH provides one amplifier circuit in an 8-terminal metal-can package. Its advertised maximum input offset voltage is 1500 µV, making offset behavior a principal selection criterion when the amplifier operates near DC. The JFET-input designation indicates the device family’s suitability for circuits handling high-impedance sources, while the single-circuit package allows one amplifier per physical component. The AD506KH is cataloged as a commercial-grade part that is not AEC-Q100 qualified. Its through-hole TO-99-8 construction supports insertion into suitable sockets, prototyping platforms, legacy analog modules, and selected industrial or instrumentation assemblies. The package has eight physical terminals in a round metal enclosure, which requires care when assigning signal, supply, and compensation connections during schematic capture and PCB layout. Typical uses include low-frequency instrumentation amplifiers, high-impedance sensor interfaces, analog buffers, waveform conditioning, laboratory measurement circuits, and legacy industrial control modules. In these applications, the single JFET-input amplifier can serve as the active element in non-inverting or inverting signal-conditioning stages. Design selection should account for the device’s 1500 µV maximum offset voltage, supply requirements, gain-bandwidth behavior, input noise, and stability requirements. The primary design consideration is package-aware implementation. Because AD506KH uses a metal-can TO-99-8 package rather than a modern surface-mount footprint, PCB designs must provide appropriate hole spacing, mechanical clearance, and pin assignments. Designers should also confirm the exact manufacturer pinout, supply voltage, offset trim configuration, and stability requirements against the Analog Devices AD506 documentation before fabrication. This product record combines package and lifecycle information with practical selection guidance, sourcing instructions, and design notes for engineers maintaining TO-99 analog assemblies. It supports direct comparison with other legacy instrumentation amplifiers while emphasizing that any substitute must be validated for footprint, pinout, supply range, offset voltage, bandwidth, noise, and stability rather than selected by amplifier type alone.
AD510JH/+ - 100V/us Precision Operational Amplifier | Analog Devices
The Analog Devices AD510JH/+ is a single-channel, internally compensated precision operational amplifier with a 100 V/us slew rate, 100 uV maximum offset voltage, and a TO-99-8 metal-can package. Designed around a bipolar input stage, it combines 25 nA input bias current with 94 dB open-loop gain for signal conditioning and precision analog control applications. An operational amplifier is a voltage-gain building block used to amplify, buffer, filter, or compare small analog signals. The AD510 belongs to the precision op-amp hierarchy, where low offset voltage, low bias current, and high open-loop gain are prioritized over rail-to-rail operation or wide common-mode range. Its 10 nV/sqrt(Hz) input-noise specification makes it suitable for instrumentation and sensor-interface circuits where the input signal is small relative to system noise. Key electrical characteristics include 100 V/us slew rate, 100 uV maximum input offset voltage, 25 nA maximum input bias current, 5 nA maximum input offset current, and 3 uV/C input offset temperature drift. The amplifier operates over a 0 C to +70 C temperature range and is specified for 10 mA output current. Built-in compensation removes the need for an external compensation network in standard voltage-amplifier configurations. The AD510 uses a bipolar input architecture, which contributes to its low-noise precision characteristics but requires suitable supply headroom for the chosen output range. The TO-99-8 package is a hermetically sealed, leaded metal-can format commonly associated with older precision analog equipment. Its mechanical format is substantially different from modern surface-mount op-amp packages, so board layout, insertion tooling, and replacement planning must account for the 8-pin cylindrical footprint. Typical applications include low-level sensor amplification, laboratory instrumentation, process-control loops, bridge-amplifier interfaces, and precision current-to-voltage converters. Its 94 dB open-loop gain supports accurate closed-loop gain when feedback-network resistors are chosen with suitable tolerances. The 100 V/us slew rate also allows faithful reproduction of moderately fast waveforms without external compensation. For stable operation, follow the recommended feedback and decoupling arrangements in the manufacturer datasheet. Decoupling capacitors should connect close to the supply pins, and unused inputs should be tied to a defined potential rather than left floating. Because this is a bipolar precision amplifier, verify output swing, common-mode range, and load current against the actual supply voltage before finalizing the circuit. This page consolidates device specifications, package details, comparison information, and practical application guidance for engineers evaluating the AD510JH/+ in legacy or maintenance-oriented analog designs.
AD510KH/+ - Precision Laser-Trimmed Instrumentation Op Amp
The Analog Devices AD510KH/+ is a low-cost, laser-trimmed precision operational amplifier designed for instrumentation, buffer, and low-level signal-conditioning applications. The AD510 family combines a precision amplifier core with trim calibration that supports repeatable DC performance in measurement systems. A 15 V integrated-circuit rating is identified for the AD510KH, while the device operates from a single positive supply or a split supply according to the manufacturer application guidance. An operational amplifier, or op amp, is a high-gain differential amplifier that uses external feedback to control gain and bandwidth. It belongs to the linear amplifier hierarchy, which includes instrumentation amplifiers, buffer amplifiers, comparators, and voltage-feedback amplifiers. In a typical signal chain, the AD510KH/+ can amplify a sensor output, buffer a high-impedance source, or drive an analog-to-digital converter input when its input range, output swing, and stability behavior match the circuit requirements. The AD510KH/+ is described by Analog Devices as a low-cost, laser-trimmed precision IC op amp. Laser trimming is significant because it allows the manufacturer to calibrate offset-related behavior during production, improving matching between devices and reducing the need for external offset adjustment in cost-sensitive precision circuits. The family is intended for instrumentation and buffering rather than high-speed signal processing. The AD510KH designation identifies a specific ordering variant of the AD510 family, while the /+ suffix denotes the manufacturer's standard commercial product-ordering convention. Package, electrical limits, temperature range, and exact pin arrangement should be confirmed against the AD510 datasheet before a new PCB is released or an existing design is reworked. Typical uses include precision bridge and sensor interfaces, instrumentation signal conditioning, analog measurement modules, and low-frequency buffer stages. In these applications, offset stability, low bias current behavior, and noise performance are more important than wideband slew rate. A practical design should verify input common-mode range at both supply rails and confirm output swing for the selected gain and load. Keep sensitive input and feedback nodes away from switching-current paths and provide a stable reference or low-level input source through appropriate filtering. Decoupling capacitors should be placed directly across the supply pins, and the unused inputs must be tied to a defined common-mode potential rather than left floating. This page combines the AD510KH/+ family description with sourcing guidance, same-footprint replacement analysis, application-focused engineering notes, and a parameter comparison covering alternatives that use the same 8-lead SOIC footprint. These resources help engineers evaluate the amplifier before requesting a quote or committing it to a prototype.
AD510LH/+ Precision Operational Amplifier | Analog Devices
Analog Devices AD510LH/+ is a single-circuit, bipolar-input operational amplifier with a maximum input offset voltage of 25 uV, packaged in an 8-pin TO-99-8 metal-can package. Its combination of bipolar input characteristics, low offset voltage, and a hermetic-style metal package makes it suitable for precision signal-conditioning stages where accurate amplification of small differential signals is required. An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages. The AD510LH/+ belongs to the broader hierarchy of operational amplifier, analog amplifier, signal-conditioning IC, and semiconductor. In a feedback circuit, the amplifier compares its differential input with a feedback-derived voltage and adjusts its output to reduce the resulting error. This principle supports closed-loop gains, filtering, buffering, instrumentation, and active transducer-interface functions. The identified device is a general-purpose precision amplifier with one active amplifier channel, bipolar input construction, and an input offset voltage specified to a maximum of 25 uV. The TO-99-8 metal-can package provides eight physical lead positions and is designed for through-hole mounting rather than a surface-mount assembly. The slash-plus ordering notation is part of the exact manufacturer orderable designation and should be retained when creating a purchase order or checking a replacement. AD510LH/+ is intended for applications in which low input offset is more important than a compact surface-mount footprint. Typical signal paths include low-level sensor amplification, bridge-amplifier front ends, precision current measurement, laboratory instrumentation, and analog measurement systems. The 25 uV maximum offset specification is particularly relevant when the amplified differential signal is small enough that input-referred error materially affects the final measurement result. Compared with a general-purpose surface-mount amplifier, the TO-99-8 package offers a larger, through-hole construction that can simplify prototyping, socketed laboratory assemblies, and selected industrial instrument builds. Its metal-can format also differs from plastic small-outline packages, so PCB designers must not assume a land pattern can be shared with an SOIC or MSOP amplifier. Pin assignment, supply range, common-mode range, and output-swing limits must be checked in the Analog Devices datasheet before circuit release. For a new design, the key design trade-off is precision-oriented through-hole packaging versus the smaller footprint and lower assembly cost associated with modern surface-mount operational amplifiers. Confirm that the selected replacement uses the same TO-99-8 lead arrangement and satisfies every voltage, current, noise, stability, and common-mode requirement. Decoupling capacitors should be placed close to the power pins, while signal routing should minimize parasitic capacitance and avoid long high-impedance traces. This product page combines the exact AD510LH/+ identification, package information, orderable pricing references, drop-in comparison candidates, and application-focused engineering guidance. It also separates known device attributes from parameters that must be confirmed in the manufacturer datasheet, helping engineers plan sourcing and PCB reuse without relying on an incomplete cross-reference result.
AD510SH - Precision Laser-Trimmed Op Amp, TO-99 | Analog Devices
The Analog Devices AD510SH is a low-cost, laser-trimmed, precision monolithic operational amplifier supplied in an 8-pin TO-99 hermetically sealed metal can package, with a maximum input offset voltage of 50 uV and a unity-gain bandwidth of 0.3 MHz. Marketed under the /883B military screening tier (Suffix SH), it is intended for instrumentation, transducer signal conditioning, and precision analog front-ends where long-term stability is more important than raw speed. An operational amplifier (op amp) is a high-gain DC-coupled differential amplifier that uses external feedback components to define its transfer function. Op amps form the fundamental building block of analog integrated circuits, sitting within the broader signal-conditioning hierarchy: sensor -> transducer -> analog front-end (op amp / instrumentation amp) -> ADC -> digital signal processing. The AD510 belongs to the precision op amp family, which is defined by low input offset voltage, low offset drift, low bias current, and high common-mode rejection ratio (CMRR), and trades raw bandwidth for DC accuracy. Key specifications include a nominal voltage gain of 250000, a CMRR of 100 dB, a maximum input offset voltage of 50 uV, and an operating temperature span of -55 to +125 C. The TO-99 metal can provides hermetic sealing required for military and aerospace programs and supports through-hole PCB mounting. Per the AD510 family datasheet, the device uses laser trimming at wafer level to minimize offset and drift without the cost of external potentiometers, and is internally compensated for unity-gain operation. Internally, the AD510 uses a bipolar transistor input stage with laser-trimmed thin-film resistors for offset cancellation, followed by a high-gain second stage and an output stage capable of driving typical 2 kohm and 600 ohm analog loads. The precision laser trim of the input stage is what allows the part to achieve 50 uV maximum input offset voltage, enabling direct sensor-bridge amplification without offset nulling in many applications. The relatively modest 0.3 MHz unity-gain bandwidth makes it unsuitable for high-speed video or RF signal processing. Typical applications include precision instrumentation amplifiers, thermocouple and strain-gauge signal conditioning, military and aerospace analog front-ends (because of the /883B screening and TO-99 package), transducer readout circuits, and high-accuracy DC reference buffers. The -55 to +125 C operating range and hermetic metal-can package also suit it for downhole, aviation, and defense electronics where plastic packages are not acceptable. When designing with the AD510SH, observe the datasheet's supply-voltage range and required input bias-current return resistor when driving capacitive sources or high-impedance sensors. Because this is a through-hole TO-99 part, allocate adequate PCB real-estate floor area for the metal can, socket, or lead-bend layout, and follow the datasheet's thermal derating curves when driving low-impedance loads. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices
The Analog Devices AD5142ABCPZ10-RL7 is a dual-channel, 256-position, non-volatile digital potentiometer (DigiPOT) with 10 kΩ nominal end-to-end resistance per channel, controlled via an I²C-compatible serial interface. Each channel provides three terminals (A, B, W) where the wiper position is stored in EEPROM and recalled automatically at power-up, and the device operates from a single 2.3 V to 5.5 V analog/logic supply. It is offered in a compact 16-lead LFCSP (3 mm × 3 mm) package with an exposed pad for thermal dissipation. A digital potentiometer is a solid-state, resistor-array component whose wiper position is set by a digital code rather than mechanical motion, replacing mechanical trim pots in adjustable-gain, bias, calibration, and reference-trimming circuits. Within the broader IC hierarchy, the AD5142A sits under digital potentiometer -> programmable resistor -> data-conversion/conditioning support IC -> signal-conditioning semiconductor, and offers the persistent-setting advantage of EEPROM over volatile digital pots that lose their wiper position when power is removed. Key specifications include ±8% nominal resistor tolerance (low for the category), 35 ppm/°C nominal temperature coefficient, 40 Ω typical wiper resistance at the ends of the array, up to ±6 mA continuous current density on the A/B/W pins, and 3 MHz I²C SCL clock. Non-volatile memory retains wiper and user data across power cycles, and an integrated soft-reset function reloads defaults on demand. The 16-lead LFCSP (3 × 3 mm) footprint saves board area over TSSOP-16 alternatives. Architecturally, the AD5142A integrates two independent CMOS resistor ladders with EEPROM-backed wiper latches, an I²C slave decoder, and a charge-pump-driven EEPROM write path. The internal ladder uses string-resistor topology with CMOS transmission-gate wiper switches, achieving low wiper resistance and fast settling. Read-back of the wiper register and EEPROM contents is supported through the same I²C bus. Typical applications include precision gain adjustment in instrumentation amplifiers, LCD contrast/brightness trimming, programmable voltage references, laser-driver bias calibration, and automotive audio volume/tone control. It is also used in industrial process control loops where mechanical pots must be eliminated to resist vibration. Design consideration: place the AD5142A close to the node being trimmed to minimize leakage/parasitic pickup on the wiper, and respect the absolute maximum A/B/W current of ±6 mA — exceeding this degrades the internal switch contacts. Use proper I²C pull-ups (typically 2.2 kΩ to 10 kΩ depending on bus capacitance and VDD). This page synthesizes distributor pricing, drop-in LFCSP-16 alternatives, and practical design notes not found in the bare manufacturer datasheet, supporting rapid engineering decisions.
AD5142ABCPZ100-RL7 - 100kΩ Dual 256-Tap I²C Nonvolatile DigiPOT | Analog Devices
The Analog Devices AD5142ABCPZ100-RL7 is a dual-channel, 256-position, nonvolatile digital potentiometer (DigiPOT) with 100 kΩ nominal end-to-end resistance, supplied in a 16-lead LFCSP (3 mm x 3 mm) package on 7 kmm reel. Each channel integrates a fixed resistor ladder with 256 taps, an I²C-compatible digital interface, and on-board EEPROM that retains the wiper position across power cycles without external circuitry. What is a digital potentiometer? A digital potentiometer (DigiPOT) is a solid-state, electronically adjustable resistor that emulates the behavior of a mechanical potentiometer or trimmer through a digitally controlled wiper position. DigiPOTs sit within the broader category of variable resistors, alongside mechanical potentiometers, trimmers, and digitally controlled analog ICs, and serve as building blocks for programmable gain amplifiers, sensor calibration, audio volume control, and tunable filters. Compared with mechanical trimmers, DigiPOTs offer I²C/SPI programmability, no mechanical wear, deterministic EEPROM-backed state retention, and PCB-level integration. Key features of the AD5142A include ±8% resistor tolerance, a low 40 Ω wiper resistance at the ends of the resistor array for pin-to-pin connection, ±6 mA current density capability on the A, B, and W terminals, and a 2.3 V to 5.5 V single-supply operating range that is compatible with 3.3 V and 5 V microcontrollers. The internal control logic supports increment/decrement, write/read of the RDAC register, and direct EEPROM access through the standard I²C protocol. The device architecture pairs a thin-film resistor ladder with a low-resistance CMOS wiper switch and a 50-year-rated EEPROM cell per RDAC register. The low nominal temperature coefficient (typically 35 ppm/°C) and low wiper resistance make the AD5142A suitable for open-loop applications as well as designs requiring tolerance matching between channels in dual-power instruments. Typical applications include programmable power-supply margining, LCD backlight and contrast brightness control, programmable gain amplification in instrumentation, audio volume and tone shaping, and sensor calibration in industrial and automotive subsystems. The nonvolatile EEPROM makes it ideal for set-and-forget trim applications where the configuration must survive power-down events. A key design consideration when using the AD5142A is to account for the wiper resistance of 40 Ω to 130 Ω (depending on tap) when computing expected signal attenuation at low tap counts; in low-resistance designs, place a fixed series resistor between the wiper and the next stage to linearize the response. Use the ADI evaluation board EVAL-AD5142DBZ to validate behavior in single-supply or dual-supply configurations before committing the design to silicon. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
AD515AKH - 150 fA FET-Input Electrometer Op Amp | Analog Devices
The Analog Devices AD515AKH is a precision, low-power, FET-input operational amplifier with a maximum input bias current of 150 fA, maximum quiescent current of 1.5 mA, and an 8-pin TO-99 metal-can package. The AD515AKH is the K-temperature-grade version of the AD515A family and is intended for electrometer, high-impedance sensor, instrumentation, and precision measurement applications. An electrometer operational amplifier is a low-noise, high-input-impedance amplifier optimized for measuring very small currents and voltages without loading the source. In the component hierarchy, the AD515AKH is a precision operational amplifier, an analog amplifier IC, and a member of the broader analog and mixed-signal semiconductor category. Its FET input stage enables measurement systems to preserve signal integrity when connected to high-impedance transducers, photodiodes, chemical sensors, and other sources with source impedances in the gigaohm range. Key features include a guaranteed maximum input bias current of 150 fA, low-power operation with a 0.6 mA typical quiescent current, and a maximum quiescent current of 1.5 mA. The AD515A family also provides laser-trimmed offset voltage, low offset drift, and low noise. These characteristics allow the AD515AKH to support stable dc measurements while avoiding excessive signal-source loading. Its precision architecture is particularly useful when measurement accuracy is governed more by input bias current and offset behavior than by high bandwidth. The AD515AKH represents a monolithic successor to the original AD515 electrometer and can replace that earlier device in most applications. Compared with general-purpose bipolar-input operational amplifiers, the AD515A topology uses a FET input stage to reduce input bias current by many orders of magnitude. The K-grade AD515AKH is specified for a maximum bias current of 150 fA, while the L-grade AD515AL reaches 75 fA and the J-grade AD515AJ reaches 300 fA. This grading lets designers balance leakage limits, availability, and application requirements without changing the basic measurement architecture. Typical uses include pH and ion-selective electrode interfaces, photodiode and optical-sensor amplifiers, high-impedance voltage dividers, capacitance sensing, laboratory instrumentation, battery and gas monitoring, and precision current-to-voltage converters. In each case, the amplifier is placed directly at the high-impedance input so that cable and board leakage, guarding, clean power, and stable reference grounding become as important as closed-loop resistor accuracy. A critical design practice is to surround sensitive inputs with guarding and keep input traces short and clean. Although input bias current is limited to 150 fA, board contamination, moisture, flux residue, and adjacent high-impedance nodes can increase leakage substantially. Use a shielded or guarded PCB layout, clean conformal coating where environmental exposure is expected, and low-value feedback resistors when system bandwidth permits. This page combines the manufacturer product description, verified distributor pricing, package details, cross-reference findings, and practical design guidance for engineers evaluating the AD515AKH. It also distinguishes pin-compatible family options from broader functional equivalents so that replacement decisions are based on electrical proximity rather than package similarity alone.
AD515JH/+ Precision J-FET Op Amp | Analog Devices
Analog Devices AD515JH/+ is a monolithic precision, low-power, FET-input electrometer operational amplifier packaged in an 8-lead TO-99 package. The device contains one amplifier circuit, uses J-FET input devices, and is designed for instrumentation applications requiring low input bias current and high input impedance. Its commercial temperature grade and hermetic-style metal-can presentation identify it as a legacy precision analog component. A J-FET-input operational amplifier is an operational amplifier whose input stage uses junction field-effect transistors. This input architecture belongs to the broader hierarchy of operational amplifier, analog amplifier, analog signal-conditioning IC, and semiconductor. Compared with bipolar-input amplifiers, J-FET inputs are commonly selected when very low input bias current, high source impedance, sensor-interface capability, and low distortion are more important than low-voltage operation or minimum cost. The AD515JH/+ combines one amplifier circuit with a low-power FET-input design and an electrometer-amplifier function. Verified product descriptions identify the device as a monolithic precision device. Input offset voltage is listed up to 3000 uV. Additional operating limits, noise, gain-bandwidth product, slew rate, input bias current, supply-current range, common-mode range, and temperature limits must be confirmed against the manufacturer datasheet before the amplifier is released into a new precision measurement design. The 8-lead TO-99 package is mechanically distinct from modern surface-mount and small-outline packages. A replacement therefore requires more than matching the amplifier category: the engineer should verify every terminal function, offset polarity, supply arrangement, package dimensions, thermal constraints, and electrical limits. The AD515JH/+ is best treated as a legacy instrumentation-amplifier building block for equipment where its established footprint and electrical behavior are already part of the system design. Typical uses include high-impedance sensor signal conditioning, pH and ion-sensitive measurement front ends, photodiode amplifiers, capacitance measurement, laboratory instrumentation, and low-current transducers. In each circuit, the principal design task is preserving signal integrity from the sensor through the amplifier input while avoiding input-bias-current error and unintended parasitic capacitance at the feedback network. For a new PCB, reproduce the TO-99-8 land pattern and pin orientation directly from the Analog Devices datasheet, including any exposed metal-can or case-potential connection. Use guarding, a single-point analog ground strategy, short feedback traces, and clean separation from switching nodes. Before substitution, compare offset voltage, bias current, noise, gain bandwidth, common-mode voltage, supply range, and temperature behavior rather than relying only on the generic J-FET-input description. This page combines the device identity, verified package information, sourcing context, legacy-placement guidance, and engineering checks needed to evaluate AD515JH/+ in instrumentation systems. It is intended to help designers distinguish a true mechanical and electrical replacement from a merely similar precision op amp.
AD515LH - 8-Pin Precision Operational Amplifier | Analog Devices
The Analog Devices AD515LH is a single-amplifier operational amplifier offered in an 8-terminal, round, wire-lead package with a commercial temperature grade. Its listed nominal supply voltage is 15 V, while the maximum input offset voltage is 1000 uV. The AD515LH belongs to the precision operational-amplifier family used for low-level signal conditioning, instrumentation, feedback control, and sensor-interface circuits. An operational amplifier is a voltage-gain amplifier intended for open-loop and feedback operation. Its inverting and non-inverting inputs compare two signals, while the output drives the difference between them with the polarity selected by the feedback network. When negative feedback is applied, the closed-loop behavior is primarily determined by external resistors and stable passive components. This makes precision op-amps useful where signal gain, input impedance, offset behavior, and output drive must be evaluated as a complete circuit. The AD515LH is specified as a commercial-grade part with 8 wire terminals in a round metal-can package. The listed nominal supply voltage of 15 V places it among conventional dual-supply precision-amplifier designs. Its maximum input offset voltage of 1000 uV is an important selection criterion because the input offset error can appear directly at the output of a low-gain precision stage. Designers should include offset and bias-current effects in their error budget rather than treating the amplifier as an ideal component. The AD515LH is identified in available replacement information as an older AD515-series device, and OPA128 is listed as a replacement for it. Replacement selection requires comparison of package lead assignment, supply range, input offset voltage, input bias current, input voltage range, noise, slew rate, supply current, and operating temperature. A device with a matching package can still require circuit changes if its electrical limits or pin functions differ. The manufacturer datasheet and the pin-description table should be the authority for each replacement. Typical uses include precision current-to-voltage conversion, low-level transducer amplification, laboratory measurement front ends, feedback control loops, and signal-conditioning modules. In these applications, the external feedback network establishes gain, while layout and guarding become increasingly important as source impedance and required accuracy rise. Stable reference components, short sensitive traces, and careful treatment of ground returns can prevent parasitic effects from overwhelming the intrinsic amplifier performance. For a new design, verify the exact supply voltage, common-mode input range, output swing, operating temperature range, and electrical limits for the selected ordering code. When replacing an installed AD515LH, compare every lead against the replacement data sheet and account for obsolete-part risk, component tolerances, and any changes in stability or compensation requirements. Use the Request a Quote form on this page for current sourcing information. This page combines package and sourcing information with a focused drop-in comparison, selection guidance, and practical engineering notes. It distinguishes confirmed electrical attributes from parameters that require direct manufacturer-datasheet confirmation, helping engineers assess the AD515LH for legacy repair, redesign, and precision-signal-chain requirements.
AD517JH Precision Op Amp, 1.5 V/us, 150 uV | Analog Devices
The Analog Devices AD517JH is a monolithic precision operational amplifier with a 1.5 V/us slew rate, 150 uV input offset voltage, 110 dB common-mode rejection, and 25 nV/√Hz input noise at 1 kHz, housed in an 8-pin TO-99 package. It operates from -18 V to -5 V and +5 V to +18 V, supports a commercial temperature range of 0°C to +70°C, and requires no external compensation. An operational amplifier, or op amp, is an active semiconductor that amplifies the voltage difference between its differential inputs. The AD517 belongs to the precision amplifier hierarchy: operational amplifier, precision amplifier, analog signal-conditioning IC, and semiconductor. Precision op amps are used where input offset, bias current, common-mode rejection, and low-frequency noise directly affect the accuracy of instrumentation, measurement, and analog signal-processing systems. The AD517JH combines laser-trimmed offset characteristics with internally compensated operation. Its 150 uV offset voltage is supported by 3 uV/°C offset temperature drift, while the 5 nA input offset current and 1 nA input bias current help reduce errors when working with high-impedance sources. The 110 dB CMRR figure improves rejection of common-mode signals, and the 25 nV/√Hz noise density at 1 kHz is relevant to low-level signal acquisition. The device uses a 5 nA input offset current, 4 mA quiescent current, and 10 mA supply-current-related operating condition within the manufacturer specification. Built-in compensation removes the need for an external compensation network in closed-loop amplifier configurations. The dual supply ranges of -18 V to -5 V and +5 V to +18 V permit operation from conventional positive and negative laboratory rails. Typical applications include precision instrumentation, low-level sensor amplification, bridge-amplifier front ends, laboratory measurement equipment, and analog control systems. In a sensor interface, the AD517JH can amplify a small differential voltage while its offset and bias-current characteristics limit errors contributed by the amplifier itself. The 1.5 V/us slew rate is also useful where the required signal bandwidth and step response must be balanced against low-noise precision. When inserting the AD517JH into a circuit, verify the differential and common-mode input limits for the selected supply voltage, especially near the positive and negative rail boundaries. Maintain adequate supply bypassing, keep feedback-loop routing compact, and account for the TO-99 package when constructing through-hole layouts or socket-based prototypes. This page organizes the AD517JH electrical characteristics, package information, application guidance, and verified sourcing links. It also distinguishes documented AD517JH specifications from unspecified details and avoids presenting unconfirmed substitutes as pin-compatible replacements.
AD517SH - 75uV Precision Offset Op Amp | Analog Devices
The Analog Devices AD517SH is a single-circuit, laser-trimmed precision operational amplifier with a maximum input offset voltage of 75 uV and a gain-bandwidth product of 0.25 MHz. The device is packaged in an hermetically sealed, eight-pin TO-99 metal can for applications requiring a traditional through-hole precision amplifier package. Its low offset voltage and low input-current characteristics support accurate signal conditioning when the system must preserve small differential signals. An operational amplifier is a voltage-feedback differential amplifier that uses high open-loop gain to amplify the difference between its non-inverting and inverting inputs. Negative feedback creates a closed-loop gain determined mainly by external resistors. Within the amplifier hierarchy, the AD517SH belongs to the precision operational-amplifier category and ultimately the broader integrated-circuit and analog-signal-processing families. The AD517SH is intended for instrumentation and measurement circuits where offset error is important relative to the measured signal. The AD517SH combines laser trimming with a thermally balanced monolithic layout and precision IC processing. These features are intended to reduce input offset voltage and improve repeatability between individual devices. Its 0.25 MHz gain-bandwidth product is modest compared with modern high-speed amplifiers, but that bandwidth supports low-frequency precision tasks without requiring the higher power and noise associated with wideband amplifiers. The hermetic TO-99-8 metal-can enclosure also provides a durable option for legacy industrial and instrumentation platforms. Typical uses include low-level sensor amplification, strain-gauge and bridge excitation signal paths, precision buffering, laboratory measurement equipment, and analog instrumentation. In these circuits, the AD517SH serves as a gain stage or buffer rather than a high-speed signal-path device. The design should preserve the amplifier's common-mode operating range, input bias-current behavior, supply requirements, and stability requirements at the selected closed-loop gain. For a new design, check the manufacturer datasheet for the complete electrical characteristics, environmental ratings, pin assignment, and recommended compensation values. Keep sensitive input and feedback routing short, place input-biasing resistors close to the appropriate pins, and provide stable local bypassing at the power terminals. Prototype the selected gain configuration because input capacitance, source impedance, and load capacitance can affect closed-loop stability. This product page combines the AD517SH's published device identity, package information, and precision characteristics with practical application guidance, sourcing information, and a conservative replacement analysis. It is intended to help engineers determine whether this traditional monolithic operational amplifier matches the accuracy, bandwidth, environmental, and mechanical requirements of an existing design.
AD518JH/+ - 12 MHz Low-Offset Op Amp | Analog Devices
The Analog Devices AD518JH/+ is a single-circuit general-purpose operational amplifier with a gain-bandwidth product of 12 MHz, an input offset voltage of 15 mV maximum, input bias current of 120 nA, and a slew rate of 70 V/us. The device is packaged in an 8-pin hermetic TO-99 metal-can package for applications that require a compact, single amplifier with relatively high speed and slew performance. An operational amplifier is an active analog component that amplifies the difference between two input voltages. Within the broader semiconductor hierarchy, the AD518JH/+ belongs to the operational-amplifier category, which is part of amplifier ICs and analog signal-conditioning systems. Its primary roles include signal gain, impedance buffering, analog summation, and active filtering. The hermetic metal-can package distinguishes it from common plastic or surface-mount operational-amplifier packages. The AD518JH/+ offers a 12 MHz gain-bandwidth product, which supports higher-frequency closed-loop operation than low-frequency general-purpose amplifiers. Its 70 V/us slew rate defines how rapidly the output can move through large voltage changes, while the 120 nA input bias current limits the disturbance introduced into high-impedance signal sources. The listed 15 mV maximum input offset voltage is material in precision DC applications and should be included in error budgets. Operationally, the AD518JH/+ is a general-purpose voltage-feedback amplifier whose performance depends on feedback topology, source impedance, load, supply voltage, and compensation. A 12 MHz gain-bandwidth product does not mean every closed-loop circuit has 12 MHz bandwidth; practical bandwidth also depends on the selected noise gain and stability margin. Likewise, slew-rate and offset limitations should be considered when processing large-amplitude or low-level signals. Typical uses include industrial instrumentation, low-level signal conditioning, analog measurement chains, sensor amplification, active filtering, and educational or laboratory analog circuits. The TO-99 package can also be advantageous where a through-hole mechanical format and hermetic construction are preferred over compact surface-mount assembly. Board layout still requires short feedback paths and careful grounding to avoid parasitic oscillation. For a new design, verify the complete pin assignment and operating conditions in the Analog Devices datasheet before laying out the PCB. Keep input and feedback traces short, connect the unused input to a defined reference potential when appropriate, and check output swing and stability against the intended supply rails. The available part information does not establish whether every legacy function can be reproduced by a modern amplifier without schematic changes. This page consolidates the confirmed AD518JH/+ electrical characteristics, package information, sourcing workflow, and practical design considerations. It also distinguishes exact-fit replacement evidence from broader functional alternatives, helping engineers assess board compatibility, offset performance, bandwidth, slew rate, and supply requirements before approving a substitution.