بەرهەمەکان (46,000+)

XC5VLX85-2FF676I - 85K Virtex-5 LX FPGA | AMD
XC5VLX85-2FF676I

XC5VLX85-2FF676I - 85K Virtex-5 LX FPGA | AMD

The AMD XC5VLX85-2FF676I is an 85K logic-cell Virtex-5 LX field-programmable gate array with 440 I/O, supplied in a 676-ball flip-chip BGA package. The device uses a -2 speed grade, is designated for industrial-temperature operation, and provides 3,538,944 internal logic cells and 82,944 register bits according to the product listing. Its 676-terminal square BGA package supports high-density board integration and broad programmable I/O. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O behavior are configured after manufacture. The FPGA category sits above programmable logic devices and forms part of the broader semiconductor and embedded-processing ecosystem. Compared with a fixed-function application-specific integrated circuit, an FPGA supports design changes, parallel processing, custom interfaces, and hardware acceleration without requiring a new ASIC fabrication run. The Virtex-5 LX family uses AMD's second-generation ASMBL column-based architecture. The XC5VLX85-2FF676I combines 3,538,944 logic cells, 82,944 register bits, and 440 I/O in one high-pin-count package. These figures make the device suitable for systems requiring considerable parallel logic, multiple high-speed interfaces, substantial data movement, or adaptable control paths. The -2 speed designation identifies a specific performance grade, while the industrial temperature designation supports designs intended to operate across an extended environmental range when the complete system and board-level requirements are also satisfied. The large 676-ball FCBGA footprint exposes substantially more device connections than a typical leaded FPGA package. That interface density can support wide parallel buses, multiple I/O standards, dedicated memory interfaces, clocks, and high-speed differential pairs. Because package escape routing, power delivery, and ball-assignment constraints become more demanding at this density, the device should be designed using the manufacturer’s pinout, package information, and board-design guidance rather than inferred from a generic BGA symbol. Typical uses include industrial control and automation, communications infrastructure, test and measurement equipment, embedded instrumentation, video processing, and high-throughput data-acquisition systems. Its 440 available I/O can accommodate multiple external interfaces, while the 85K-scale logic fabric can implement parallel algorithms, protocol engines, control logic, and signal-processing pipelines. Industrial temperature grading is particularly relevant to equipment that must operate reliably beyond typical consumer-environment limits. The main design consideration is that a 676-ball FPGA requires disciplined power-plane segmentation, decoupling, ball-grid layout work, and careful high-speed routing. Designers should preserve the pin and bank functions required by the design, validate every I/O standard against the selected bank, and use the manufacturer’s recommended configuration and power-sequencing procedures. Migration to another device should not be treated as automatic even when logic resources and package names appear similar. This product page organizes the verified device identity, package details, commercial inquiry path, comparison points, and engineering guidance around the XC5VLX85-2FF676I. It also distinguishes true package-compatible family options from broader FPGA redesign alternatives, helping teams evaluate replacement risk before committing to a new PCB or bitstream.

RFQ پەیوەندی
XC5VLX85-2FFG676C - 82,944-Cell Virtex-5 FPGA | AMD
XC5VLX85-2FFG676C

XC5VLX85-2FFG676C - 82,944-Cell Virtex-5 FPGA | AMD

The AMD XC5VLX85-2FFG676C is a Virtex-5 LX field-programmable gate array with 82,944 FPGA logic cells, 440 logical cells per slice, and 3.38 Mbit of embedded block RAM. It is packaged in a 676-ball fine-pitch BGA package and fabricated using 65 nm CMOS technology. The device is configured for a nominal 1 V core-supply operating point and the -2 speed grade supports performance-oriented Virtex-5 LX designs. A field-programmable gate array, or FPGA, is a programmable semiconductor in which configurable logic, block RAM, input/output resources, and dedicated hard processors are arranged into a device tailored for digital logic implementation. The Virtex-5 LX FPGA belongs to the FPGA & CPLD product hierarchy and combines high-density programmable logic with high-speed serial connectivity, general-purpose I/O, dedicated memory resources, and hardened processing capabilities. This combination makes the device suitable when designers need substantial parallel processing in one package rather than an assembly of discrete logic devices. The XC5VLX85-2FFG676C provides 82,944 logic cells organized around 440 logical cells per slice. Its embedded memory totals 3.38 Mbit, enabling packet buffering, local storage, data acquisition, and display-processing functions without external memories. Additional hard resources include dedicated block RAM, DSP processing elements, input/output logic, clock management, and high-speed serial transceivers. These resources allow parallel video, communications, signal-processing, and industrial-control functions to be consolidated into a single FPGA implementation. The 676-ball FCBGA package supports dense board routing and direct ball-grid-array assembly, but it requires a multilayer PCB with carefully controlled escape routing, power distribution, and thermal management. The -2 suffix identifies the device speed grade, while the C suffix identifies its commercial temperature designation. Green-package and industrial-temperature alternatives in the same Virtex-5 LX family can be considered when supply, qualification, or assembly requirements differ. Typical uses include industrial automation, video processing, telecommunications, networking equipment, test and measurement systems, embedded control, and high-speed serial interface designs. The large logic and memory resources are especially valuable for parallel image pipelines, protocol conversion, real-time signal processing, and tightly coupled control systems that benefit from deterministic FPGA execution. Designers should use the manufacturer pinout and package files when assigning every 676-ball position and should budget conservative fanout for I/O-heavy interfaces. A multilayer board should provide independent power and ground planes, short return paths, decoupling close to supply pins, and uninterrupted thermal paths. Configuration interfaces, clocking, memory migration, and high-speed differential routing must also be validated against the device documentation before layout release. This product page combines the exact ordering information, package identity, logic and memory resources, documented equivalent devices, and engineering-oriented replacement guidance for faster component selection and PCB planning.

RFQ پەیوەندی
XC5VLX85-2FFG676I - 82,944-Cell Virtex-5 FPGA | AMD
XC5VLX85-2FFG676I

XC5VLX85-2FFG676I - 82,944-Cell Virtex-5 FPGA | AMD

AMD XC5VLX85-2FFG676I is a Virtex-5 LX field-programmable gate array with 82,944 programmable logic cells, 440 I/O, and a 676-pin FCBGA package. The device is manufactured on 65 nm CMOS technology and operates from a 1 V core supply. Its -2 speed designation identifies a high-performance Virtex-5 LX configuration, while the FFG676 package provides a high pin count for systems that require extensive interconnect and interface resources. A field-programmable gate array is a programmable-logic semiconductor whose digital circuits are configured after manufacture. Within the semiconductor hierarchy, an FPGA integrates programmable logic blocks, programmable input/output resources, embedded memory, clock-management circuitry, and dedicated configuration resources on one device. The Virtex-5 LX family targets high-performance applications requiring substantial parallel processing, flexible interfaces, and dedicated hardware resources rather than a fixed instruction set. The principal features of the XC5VLX85 include 82,944 logic cells, 440 user I/O, a 676-pin FCBGA package, and 65 nm CMOS construction. The 440 I/O positions permit dense connections to external memory, network interfaces, converters, clocks, and parallel processors. The 1 V core supply is characteristic of advanced-node FPGA designs and requires careful power delivery, decoupling, and signal-integrity implementation at the board level. The FFG676 package also exposes a substantial perimeter and ball grid for power, ground, configuration, clock, and user signals. Because the package has 676 balls, exact ball assignments, power rails, and configuration pins must be taken from the AMD Virtex-5 package pinout file before schematic capture or PCB layout. The Industrial suffix identifies the specified product grade, but grade-specific environmental limits must be confirmed from the authoritative product documentation for the production revision. Typical uses for this device include industrial control and instrumentation, high-speed networking, telecommunications infrastructure, signal processing, test and measurement, embedded imaging, and programmable interface aggregation. The large logic and I/O resources allow multiple parallel channels to be consolidated in one FPGA while retaining the flexibility to update configuration data during development or field maintenance. For a new design, first confirm that the 676-ball FCBGA footprint, power architecture, configuration method, memory interface requirements, and speed grade meet the system constraints. Power rails should be split according to the package data and terminated with the capacitor network specified by AMD. High-speed routing also requires controlled-impedance PCB layers, solid ground planes, and careful treatment of configuration and clock signals. This page combines the exact orderable characteristics, package and technology details, design guidance, comparison parameters, and verified sourcing references for XC5VLX85-2FFG676I. It also distinguishes true same-package alternatives from larger FPGAs that may offer similar general functionality but cannot be treated as pin-compatible replacements without a complete footprint and power-domain review.

RFQ پەیوەندی
XC5VLX85-3FFG676C - 85K LX FPGA, 676-BBGA | Xilinx
XC5VLX85-3FFG676C

XC5VLX85-3FFG676C - 85K LX FPGA, 676-BBGA | Xilinx

The Xilinx XC5VLX85-3FFG676C is a Virtex-5 LX field-programmable gate array containing 82,944 logic cells and providing 440 I/O in a 676-pin FCBGA package. The -3 speed designation identifies a performance grade within the Virtex-5 LX family, while the FFG676 suffix identifies the 676-ball flip-chip BGA package. This device combines programmable logic, dedicated hard IP, block RAM, and programmable I/O in one configurable semiconductor. An FPGA is a programmable semiconductor whose digital circuits are defined through a configuration bitstream rather than fixed mask geometry. The Virtex-5 LX family occupies the FPGA hierarchy below an application-specific integrated circuit and above conventional fixed logic. Its combination of logic resources, high-speed serial connectivity, general-purpose input/output, embedded memory, and dedicated processing blocks makes it useful where product functionality must evolve faster than fixed logic can be respun. The XC5VLX85-3FFG676C is identified in product listings as an FPGA with 82,944 logic cells, 440 I/O, and a 676-BBGA or FCBGA package. Its large I/O count allows simultaneous connections to external memory, parallel buses, clocks, data converters, and control peripherals. The 676-ball package also supports dense board layouts where a lower-pin-count package would require unacceptable routing congestion or a multilayer interconnect beyond practical PCB limits. The -3 device is intended for designs requiring the higher performance grade of the XC5VLX85 family. Speed-grade changes affect the timing characteristics and therefore the maximum operating frequencies that a given design can achieve after implementation. The exact timing limits, internal block quantities, voltage requirements, and configuration parameters must be confirmed in the AMD/Xilinx Virtex-5 product documentation for the selected design and package. Typical applications include high-throughput digital signal processing, network-interface and packet-processing equipment, industrial control, test and measurement, communications infrastructure, and embedded systems requiring extensive parallel I/O. In these systems, programmable logic can implement parallel interfaces, state machines, buffer management, packet parsing, clocking, and protocol conversion while retaining field-updatable behavior. The principal engineering consideration is package-level design planning. A 676-ball FCBGA requires careful ball assignment, power distribution, decoupling, via-in-pad or fanout construction, and assembly-process coordination. Pin compatibility should not be inferred from the family name alone; engineers should compare the official package pinout files, voltage assignments, configuration pins, and board constraints before substituting any device. This page combines the exact catalog identity of the XC5VLX85-3FFG676C with package, I/O, logic-cell, sourcing, alternative, and design-placement guidance. It also distinguishes genuine same-footprint family alternatives from broader FPGA migrations that require different packages, pin assignments, power systems, or design recompilation.

RFQ پەیوەندی
XC5VSX35T-1FF665I - 34,816-Cell FPGA | AMD | Industrial Control
XC5VSX35T-1FF665I

XC5VSX35T-1FF665I - 34,816-Cell FPGA | AMD | Industrial Control

The AMD XC5VSX35T-1FF665I is a Virtex-5 SXT field-programmable gate array with 34,816 logic cells, 192 DSP48E slices, 3,024 Kb of block RAM, and 360 I/O sites in a 665-pin FCBGA package. It is built on 65 nm process technology and carries the -1 speed grade and industrial temperature designation. These resources support parallel digital processing, fixed-point signal processing, high-speed interface bridging, and configurable control logic without requiring a discrete processor or ASIC. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and signal-processing resources are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, which includes configurable logic blocks, programmable I/O, embedded block RAM, and dedicated DSP processing. A Virtex-5 SXT FPGA combines these resources in a single package, allowing designers to implement parallel algorithms, control systems, communications links, and hardware accelerators in one programmable device. The XC5VSX35T provides 5,440 logic cells according to the product listing, 34,816 total logic cells, and 192 DSP48E slices. Its 3,024 Kb block RAM provides on-chip storage for buffers, packet data, and intermediate calculations. The 360 I/O sites support high pin-count board-level integration, while the -1 speed grade establishes the device’s timing-performance class for industrial designs. The 65 nm Virtex-5 architecture combines programmable logic with dedicated DSP48E processing resources. This architecture is useful when an application requires deterministic parallel throughput, configurable data paths, and frequent design changes without changing the PCB. The 665-FCBGA package has a 27 mm by 27 mm land pattern according to the FPGA market listing, making dense but manufacturable routing essential. Typical uses include industrial automation, telecommunications equipment, video and image processing, test and measurement, embedded signal-processing systems, and high-throughput data acquisition. The 192 DSP48E slices are particularly relevant to filtering, modulation, correlation, and fixed-point arithmetic, while the block RAM helps reduce reliance on external memory for buffering and pipelined operations. PCB planning should account for the fine-pitch BGA escape routing, controlled-impedance differential pairs, independent clock routing, and decoupling across multiple power rails. Because FPGA power and signal integrity are tightly coupled, use the manufacturer’s recommended pinout, package information, and PCB-design guidance when assigning every ball and power plane. Configuration, startup, clocking, and JTAG behavior must also be validated in the final system design. This product page combines the exact device identifiers, package details, resource counts, drop-in same-package alternatives, and practical implementation guidance needed to evaluate the XC5VSX35T for an industrial FPGA platform.

RFQ پەیوەندی
XC5VSX35T-1FFG665C - 35K SXT Virtex-5 FPGA | AMD
XC5VSX35T-1FFG665C

XC5VSX35T-1FFG665C - 35K SXT Virtex-5 FPGA | AMD

The AMD XC5VSX35T-1FFG665C is a Virtex-5 SXT field-programmable gate array with 34,816 logic elements, 3,096,576 embedded RAM bits, and 360 user I/O, supplied in a 665-BBGA FCBGA package. It operates from a 0.95 V to 1.05 V core supply and is built on 65 nm CMOS technology for high-performance programmable logic, DSP, and serial connectivity designs. A field-programmable gate array, or FPGA, is a reprogrammable semiconductor that combines configurable logic blocks, programmable interconnects, block RAM, dedicated processing resources, and I/O in one integrated device. Within the device hierarchy, the XC5VSX35T belongs to the AMD Virtex-5 family and the SXT platform, combining general-purpose programmable logic with high-performance DSP and networking resources for demanding embedded systems. Principal device characteristics include 2,720 configurable logic blocks, 360 I/O, a 0.95 V to 1.05 V operating supply range, and an industrial junction-temperature range of 0 °C to 85 °C. The 665-BBGA FCBGA package also provides 360 user I/O for high-speed board-level connectivity. Dedicated tri-mode Ethernet media-access functionality is described for 10 Mb/s, 100 Mb/s, and 1 Gb/s operation according to the IEEE 802.3-2002 specification. The SXT architecture supports parallel processing, DSP-based signal chains, embedded protocol engines, and high-speed memory interfaces. Its 34,816 logic elements and 3,096,576 RAM bits allow multiple parallel data paths to be consolidated into a single device rather than distributed across several discrete components. The 360 I/O count also supports wide parallel buses and high pin-count board architectures. Typical applications include industrial control and automation, networking and telecom equipment, high-speed data acquisition, video and image processing, communications infrastructure, and embedded signal-processing systems. The 360-I/O FCBGA footprint is particularly useful where a board design requires many high-speed connections but needs the integration of programmable logic and dedicated hardware resources in one package. Design work should begin with the Virtex-5 device documentation, including the package pinout, configuration requirements, power sequencing, and PCB design guidance. Because this is a large FCBGA with 360 I/O, controlled-impedance routing, full-layer power distribution, decoupling, and thermal analysis are essential to maintain signal integrity and reliable operation at the specified junction temperature.

RFQ پەیوەندی
XC5VSX35T-1FFG665I - 34,816-Cell SXT FPGA | AMD
XC5VSX35T-1FFG665I

XC5VSX35T-1FFG665I - 34,816-Cell SXT FPGA | AMD

The AMD XC5VSX35T-1FFG665I is a Virtex-5 SXT field-programmable gate array with 34,816 logic cells, 360 user I/O, and 3,096,576 bits of block RAM in a 665-pin FCBGA package. It uses 65 nm CMOS technology and operates from a 1 V core supply, making it a high-density programmable-logic device for demanding embedded systems. The FFG665 designation identifies the 27 mm x 27 mm flip-chip ball-grid-array package, while the T suffix identifies the SXT FPGA family. A field-programmable gate array is a programmable-logic device whose digital functions are configured after manufacture. Within the semiconductor hierarchy, an FPGA integrates configurable logic blocks, programmable interconnect, block RAM, dedicated processing resources, and user I/O on one monolithic device. Virtex-5 SXT devices extend that architecture with scalable DSP resources for signal processing and high-speed connectivity for communications and data acquisition. The XC5VSX35T combines 34,816 logic cells with 2,720 logic and arithmetic blocks and 3,096,576 bits of RAM. Its 360 user I/O provide substantial connectivity for parallel buses, high-speed transceivers, memory interfaces, and external control logic. A 65 nm process node and 1 V core supply place the device in the classic high-performance FPGA generation used where deterministic parallel processing and abundant routing resources matter more than minimal power consumption. The SXT architecture is particularly suited to digital signal processing, communications, test equipment, industrial control, and defense-oriented signal-chain designs. Parallel lookup tables and configurable DSP blocks can implement filters, correlation, transforms, and protocol handling, while dedicated block RAM supports buffering and data alignment. The large pin count also enables dense, high-speed board designs without an external lane-signal-conditioning hierarchy. Typical uses include radar and communications processing, video and image pipelines, high-speed test and measurement systems, semiconductor test equipment, and industrial data-acquisition platforms. Designers normally pair this programmable logic with external DDR memory, clock-generation devices, high-speed transceivers, and fixed-function controllers when the complete system exceeds the FPGA's internal resources. The primary design consideration is power and thermal planning. Even with a 1 V core, the 665-pin FCBGA can dissipate substantial power when large portions of the logic array, RAM, and DSP resources operate concurrently. Use conservative clocking, disable unused blocks, follow the device power-estimation methodology, and provide dense copper heat-spreading paths on multilayer boards. Confirm every high-speed board-routing rule against the AMD pinout and PCB design guidance. This page consolidates device identity, package details, verified resource counts, orderable alternatives, and practical implementation guidance into one engineering reference. It is intended to accelerate design review while directing procurement, footprint verification, thermal analysis, and PCB layout to the appropriate AMD documentation.

RFQ پەیوەندی
XC5VSX35T-2FFG665C - 34816-Cell Virtex-5 SXT FPGA | AMD
XC5VSX35T-2FFG665C

XC5VSX35T-2FFG665C - 34816-Cell Virtex-5 SXT FPGA | AMD

The AMD XC5VSX35T-2FFG665C is a Virtex-5 SXT field-programmable gate array built on 65 nm CMOS technology, with 34,816 logic cells, 360 user I/O, and a 1 V core supply voltage. The device is supplied in a 665-pin FCBGA package, making it intended for advanced digital design rather than low-pin-count embedded systems. Its -2 speed designation identifies a performance grade within the XC5VSX35T family, while the C suffix identifies the commercial operating-temperature class. A field-programmable gate array, or FPGA, is a programmable-logic semiconductor in which configurable logic blocks, programmable interconnect, and block RAM are combined on one integrated circuit. Within the device hierarchy, an FPGA belongs to the programmable-logic category, the broader semiconductor category, and the embedded-processing and accelerator ecosystem. The Virtex-5 SXT platform targets demanding parallel-processing designs that benefit from hardware parallelism, dedicated memories, and high-speed serial connectivity. The XC5VSX35T combines 34,816 logic cells with 360 I/O in a single package. The 65 nm CMOS process generation and 1 V internal core voltage place it within the Virtex-5 architecture. The SXT designation identifies the large DSP and memory-oriented member of this family, supporting applications that need high-throughput fixed-point or floating-point processing, parallel datapaths, and programmable logic control. The commercial temperature suffix supports industrial and commercial equipment designs. Programmable logic resources can be combined with dedicated block RAM and DSP arithmetic resources instead of relying only on sequential processor instructions. This architecture is useful for image and video pipelines, communications infrastructure, industrial control, test equipment, and accelerator prototypes. Because design timing and routing are architecture-dependent, system timing closure should be evaluated with the Vivado design suite under the intended clock, device, and operating conditions rather than inferred only from the logic-cell count. The 665-pin FCBGA requires a complex multilayer PCB with fine-pitch routing, controlled power delivery, and a thermal design capable of removing the device's dissipated power. Signal integrity, power-plane integrity, via density, decoupling, and solder-mask-defined land patterns are critical to reliable operation. Use the package drawings, pinout tables, and high-density design guidelines in the Virtex-5 documentation when defining the schematic and layout. This page combines the exact device identifiers, package information, replacement candidates, and practical PCB guidance in a compact engineering reference. Request a quote through the form on this page for current commercial availability and lot-level sourcing support.

RFQ پەیوەندی
XC5VSX35T-2FFG665I - 34,816-Cell SXT FPGA | AMD
XC5VSX35T-2FFG665I

XC5VSX35T-2FFG665I - 34,816-Cell SXT FPGA | AMD

AMD/Xilinx XC5VSX35T-2FFG665I is a Virtex-5 SXT field-programmable gate array with 34,816 logic elements, 360 user I/O, and 1 V core operation, housed in a 665-ball FCBGA package. Built on a 65 nm CMOS process, it combines programmable logic, dedicated DSP resources, block RAM, and high-speed serial connectivity for demanding embedded and signal-processing systems. An FPGA is a semiconductor whose digital circuit is configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device, a reconfigurable digital IC, and a member of the broader semiconductor family. Virtex-5 SXT devices extend the basic FPGA concept with scalable DSP blocks, distributed and block RAM, and high-performance interconnect resources for parallel processing. The XC5VSX35T provides 34,816 logic cells, 360 I/O, 65 nm CMOS construction, and a 1 V core voltage. Its 665-ball FCBGA package supports dense board layouts and the substantial pin count required for wide parallel interfaces. The -2 speed designation identifies the device performance grade, while the I suffix denotes the industrial temperature option. The second-generation ASMBL column-based architecture organizes configurable logic and dedicated resources into a scalable FPGA platform. This makes the device suitable when a fixed-function ASIC would be too inflexible and a microcontroller would not provide sufficient parallel throughput. The SXT family is especially relevant to designs combining logic control, high-speed data paths, DSP operations, and memory-intensive buffering. Typical applications include telecommunications and networking equipment, industrial automation, high-speed data acquisition, radio-frequency and baseband processing, test and measurement systems, and embedded control platforms. In these systems, the FPGA can implement parallel filters, protocol interfaces, packet processing, control logic, and accelerator functions in one programmable device. Board design should preserve pin compatibility, power sequencing, decoupling, and thermal margins for the 665-ball FCBGA. Configuration storage, clocking, decoupling, differential-routing rules, and exposed-pad or thermal-via requirements must be checked against the package-specific guidance in the manufacturer documentation before layout signoff. This page combines the exact device identity and package data, same-footprint family alternatives, parameter comparisons, and practical FPGA design guidance. It is intended to help engineers determine whether the XC5VSX35T-2FFG665I fits a high-density programmable-logic design without confusing speed-grade, temperature-grade, and package-suffix differences.

RFQ پەیوەندی
XC5VSX35T-3FFG665C - 34,816 Logic Cell FPGA | AMD Xilinx
XC5VSX35T-3FFG665C

XC5VSX35T-3FFG665C - 34,816 Logic Cell FPGA | AMD Xilinx

The AMD Xilinx XC5VSX35T-3FFG665C is a Virtex-5 SXT field-programmable gate array with 34,816 logic elements, 360 user I/O pins, and a 665-pin FCBGA package. It is built on 65 nm technology and uses a 1 V supply, making it a high-density programmable-logic device for communications, control, signal processing, and embedded system designs. The part is identified as the speed-grade 3 commercial version in the product listing. A field-programmable gate array, or FPGA, is a programmable logic device that combines configurable logic, programmable I/O, memory resources, dedicated processing blocks, and clocking resources in one integrated circuit. The FPGA and CPLD hierarchy places the Virtex-5 SXT device above basic programmable-logic functions because it supports substantial parallel processing, block RAM, DSP-oriented resources, and high-speed serial connectivity. The XC5VSX35T is identified in the product information as a Virtex-5 SXT family device with 34,816 logic elements and 3,096,576 total RAM bits. The device provides 360 user I/O pins and 2,720 LABs/CLBs, according to the component overview. These resources allow designers to implement parallel datapaths, interface logic, control functions, packet processing, and embedded memory without combining multiple programmable devices. Its 1 V operating supply and 65 nm process technology are important for power, clocking, signal-integrity, and thermal-design planning in high-performance FPGA systems. The XC5VSX35T-3FFG665C is suited to applications requiring high logic density and extensive I/O, including network packet processing, industrial automation, test equipment, telemetry, embedded control, and signal-processing platforms. The 360 I/O count is particularly useful for systems that need parallel sensor acquisition, external memory interfaces, high-speed control buses, or multiple differential and single-ended communication interfaces. The 665-pin FCBGA package creates a demanding PCB-layout requirement. Designers should follow the manufacturer’s pinout, differential-pair routing, power-plane, decoupling, and thermal guidance, while carefully accounting for BGA escape routing and via density. Configuration, clocking, memory, and differential I/O implementations should be validated against the applicable Virtex-5 documentation before PCB release. This product page combines the device identity, electrical and logic-resource details, package information, drop-in family alternatives, comparison data, and practical engineering guidance. It is intended to accelerate component selection and PCB planning for engineers designing around the AMD Xilinx Virtex-5 SXT XC5VSX35T platform.

RFQ پەیوەندی
XC5VSX35T-X1FFG665C - 34,816-LE SXT FPGA | AMD
XC5VSX35T-X1FFG665C

XC5VSX35T-X1FFG665C - 34,816-LE SXT FPGA | AMD

AMD XC5VSX35T-X1FFG665C is a Virtex-5 SXT field-programmable gate array with 34,816 logic elements, 2,720 configurable logic blocks, 360 I/O, and a 665-BBGA FCBGA package. The X1 marking identifies the -1 speed family with an extended-temperature device variant, making the FPGA suitable for demanding embedded, communications, industrial, and test systems. A field-programmable gate array is a semiconductor whose logic, interconnects, and I/O can be configured after fabrication. The Virtex-5 SXT family belongs to the FPGA and CPLD hierarchy and combines configurable logic blocks, block RAM, DSP resources, dedicated I/O, and high-speed serial transceivers in one programmable device. This combination allows engineers to implement parallel processing, packet handling, signal processing, and control functions without using multiple fixed-function devices. The XC5VSX35T provides 34,816 logic elements and 2,720 CLBs, with 360 I/O available in the FFG665 package. The 665-BBGA, FCBGA construction provides a dense, board-level package suited to complex systems where routing resources and device density matter more than a small outline. The -1 performance designation supports a lower-speed timing target than -2 and -3 devices, providing additional timing margin for designs operating near their nominal clock limits. The SXT architecture is intended for high-performance FPGA workloads. Its programmable logic can be combined with memory and arithmetic resources for embedded processors, digital signal processing, data acquisition, and protocol termination. Dedicated I/O and high-speed transceivers make it possible to build systems that move data between modules, serialize links, and coordinate multiple clock domains. Exact transceiver rates, voltage ranges, power figures, and temperature limits require confirmation in the manufacturer datasheet before a production design is released. Typical applications include telecommunications line cards, industrial control modules, video and image-processing systems, instrumentation, network-interface equipment, and aerospace or defense subsystems. The 360 I/O count is particularly useful when a design requires broad parallel connectivity to external memories, transceivers, converters, and custom interface logic. A programmable device also allows field updates and design iteration without changing the physical PCB. PCB implementation should follow the manufacturer's package, pinout, power-decoupling, and configuration guidance exactly. A 665-ball BGA requires careful escape routing, multilayer board construction, clean power distribution, and adequate thermal spreading beneath the device. Validate signal integrity, configuration startup, clocking, and I/O voltage compatibility on hardware before production because firmware and board-level errors in a high-pin-count FPGA can affect many functional blocks at once. This product page combines the exact target-device identifiers with same-footprint family alternatives, design guidance, and a parameter-by-parameter comparison. It is intended to accelerate component identification, replacement planning, and board-level engineering while keeping qualification decisions tied to manufacturer documentation and application requirements.

RFQ پەیوەندی
XC5VSX50T-1FF665C - 52K Logic Cell SXT FPGA | AMD
XC5VSX50T-1FF665C

XC5VSX50T-1FF665C - 52K Logic Cell SXT FPGA | AMD

AMD XC5VSX50T-1FF665C is a Virtex-5 SXT field-programmable gate array with 52,224 logic cells, 4,080 configurable logic blocks, and 360 user I/O, packaged in a 665-ball FCBGA. It combines programmable logic, DSP48 processing resources, block RAM, dedicated I/O, and selectable clocking in one CMOS FPGA. The -1 speed designation places the device in AMD's performance-grade family for designs requiring predictable timing in demanding parallel processing, communications, and signal-processing systems. An FPGA is a semiconductor whose digital logic is configured by the end user rather than fixed during manufacturing. It belongs to the programmable-logic hierarchy: FPGA → field-programmable gate array → programmable digital IC. Unlike a fixed-function microcontroller or application-specific processor, an FPGA can implement parallel datapaths, interface protocols, control algorithms, and hardware acceleration simultaneously. This makes it particularly useful when deterministic operation, high I/O density, or adaptable field updates are more important than minimizing software overhead. The Virtex-5 SXT architecture is designed for high-performance signal processing and networking. Its 52,224 logic cells provide substantial parallelism, while the 360 I/O support communication with external memory, converters, clocks, and high-speed interfaces. Configurable logic blocks implement Boolean and arithmetic functions, DSP48 blocks accelerate multiply-accumulate operations, and block RAM stores data close to processing resources. The result reduces transfers across system buses and can improve throughput for filtering, transforms, protocol handling, and control logic. The 665-ball FCBGA package supports dense board routing and exposes the device's high I/O count, but it also requires careful escape routing and multilayer PCB construction. Every ball assignment and power configuration must follow the manufacturer's package pinout files and board-design guidance. Correct ball-grid-array land patterns, via-in-pad or fanout strategies, and differential-pair routing are essential for reliable operation at the intended clock and I/O rates. Typical uses include industrial networking, radar and signal processing, communications infrastructure, high-speed data acquisition, and embedded test systems. In these applications, parallel FPGA resources can process multiple channels concurrently, while dedicated logic handles clocking and interface conversion. The device is also suitable for custom accelerator prototypes where a configurable architecture allows parallel algorithms to be updated without changing the board. A key design consideration is the device's complexity and thermal behavior. Dense Virtex-5 configurations can produce substantial dynamic power, so designers should preserve the recommended supply rails, decoupling structure, thermal vias, and copper planes. Configuration storage, programming interface access, and complete pinout verification should be scheduled before layout release. This page combines exact catalog data with package guidance, application fit, comparison parameters, and practical design notes. It also identifies same-package FPGA alternatives while highlighting speed-grade, temperature-grade, and package-marking differences that engineers must check before replacement.

RFQ پەیوەندی
XC5VSX50T-1FF665I - Virtex-5 SXT FPGA | AMD | 52K Logic
XC5VSX50T-1FF665I

XC5VSX50T-1FF665I - Virtex-5 SXT FPGA | AMD | 52K Logic

The AMD XC5VSX50T-1FF665I is a Virtex-5 SXT field-programmable gate array with 52,224 logic cells, 4,080 configurable logic blocks, and 360 I/O sites, housed in a 665-ball FCBGA package. The device combines programmable logic, hard DSP48E processing resources, distributed and block memory, and programmable I/O within a single CMOS FPGA. Its -1 speed designation identifies the performance grade of this Virtex-5 SXT configuration. A field-programmable gate array is a semiconductor whose digital circuits are defined through a configuration bitstream rather than fixed mask patterns. Within the product hierarchy, an FPGA is a programmable-logic device and semiconductor. The Virtex-5 SXT family extends that hierarchy into a high-performance architecture optimized for parallel signal processing, high-speed connectivity, embedded storage, and demanding digital signal-processing systems. Key configuration details include 52,224 logic cells organized into 4,080 configurable logic blocks, 360 I/O sites, and a 665-ball flip-chip ball grid array package. The distributed memory and block RAM resources make the device useful for buffering, packet processing, filtering, waveform conversion, and control logic. Its large pin count supports broad interfaces, while the SXT feature mix targets designs requiring substantial parallel arithmetic and data movement. The part uses the Virtex-5 programmable-logic architecture, including the Slice and configurable logic block structure, DSP48E multiplier-accumulator resources, SelectIO technology, and dedicated memory resources. A complete design also depends on configuration settings, supported I/O standards, clocking, power management, and the selected bitstream. Exact voltage, clock-frequency, resource-count, and thermal limits should be confirmed in the Virtex-5 SX data sheet and package documentation before release to production. Typical applications include high-throughput digital filtering, software-radio baseband processing, industrial control and instrumentation, communications infrastructure, radar and signal-processing subsystems, and high-speed interface bridging. In these systems, the FPGA can execute parallel datapaths that are difficult to implement economically with fixed-function processors or discrete logic. PCB design requires careful attention to the 665-ball FCBGA escape routing, power and ground-plane integrity, decoupling, via-in-pad requirements, and thermal management. Differential interfaces should follow the manufacturer’s package and board guidelines, while configuration pins and auxiliary functions must be terminated as specified in the design documentation. This page combines the device identity, package characteristics, documented configuration details, drop-in candidates, comparison points, and implementation guidance needed to evaluate the XC5VSX50T-1FF665I before schematic capture, PCB layout, and legacy-product migration.

RFQ پەیوەندی
XC5VSX50T-1FFG665C - 52,224-Cell Virtex-5 SXT FPGA | AMD
XC5VSX50T-1FFG665C

XC5VSX50T-1FFG665C - 52,224-Cell Virtex-5 SXT FPGA | AMD

The AMD XC5VSX50T-1FFG665C is a Virtex-5 SXT field-programmable gate array with 52,224 logic cells, 4,080 logic blocks, 360 I/O, and a 665-ball FCBGA package. It operates from a 0.95 V to 1.05 V core supply, provides 360 outputs and 360 inputs, and is specified over a 0°C to 85°C temperature range. The device combines programmable logic, embedded block RAM, digital signal processing resources, programmable I/O, and high-speed serial connectivity in one configurable semiconductor. An FPGA is a programmable logic device whose digital circuits are defined through configuration bitstreams rather than fixed logic masks. Within the semiconductor hierarchy, an FPGA sits between fixed-function logic and application-specific integrated circuits. The Virtex-5 SXT family is designed for high-performance programmable logic, DSP-intensive signal processing, networking, communications, industrial control, and test equipment. Its large logic-cell count supports parallel architectures, control planes, packet processing, and custom accelerator functions on a single device. The XC5VSX50T provides 52,224 logic cells and 4,080 logic blocks for combinational and sequential logic. The 360 I/O positions support interfaces to external memory, transceivers, clocks, data converters, and board-level peripherals. According to the AMD package and product information, the device uses 65 nm CMOS technology and a 1 V core architecture. Its 665-ball FCBGA package supports dense board routing while keeping the device compatible with high-pin-count FPGA design practices. Programmable resources are configured through a bitstream that defines interconnect paths and logic functions. The exact RAM capacity, DSP count, transceiver configuration, supported I/O standards, maximum clock performance, and power characteristics must be confirmed in the family datasheet and the device-specific configuration tables before a design is released. These values are especially important when planning memory bandwidth, timing closure, power budgeting, and board-level connectivity. Typical applications include network packet-processing systems, industrial automation controllers, communications infrastructure, test and measurement platforms, embedded signal-processing subsystems, and high-speed interface bridges. Its 360 I/O and 52,224 logic cells make it suitable for designs combining substantial parallel logic with multiple external interfaces. The -1 speed designation and commercial temperature range fit equipment operating from 0°C to 85°C. Board design should use the AMD Virtex-5 package pinout files, preserve the required power and ground distribution, and validate every high-speed interface against the selected I/O standard. Configuration storage, clocking, decoupling, and JTAG access must also be checked against the Virtex-5 design guidance. Before substituting this device, verify package ball assignments, supported configuration files, power sequencing, and the exact logic, RAM, DSP, and transceiver resources used by the design. This page combines package, logic-resource, voltage, temperature, I/O, and sourcing information with replacement analysis and practical implementation guidance. Use it to identify the correct FPGA and plan a pin-compatible, thermally viable, resource-complete implementation.

RFQ پەیوەندی
XC5VSX50T-1FFG665I - 52,224-Cell Virtex-5 SXT FPGA | AMD
XC5VSX50T-1FFG665I

XC5VSX50T-1FFG665I - 52,224-Cell Virtex-5 SXT FPGA | AMD

The AMD XC5VSX50T-1FFG665I is a Virtex-5 SXT field-programmable gate array with 52,224 logic cells, 360 I/O, a 0.95 V to 1.05 V core supply range, and a 665-ball FCBGA package measuring 27 mm by 27 mm. It combines programmable logic, dedicated DSP48E processing resources, block RAM, and selectable I/O standards in one reconfigurable semiconductor device. A field-programmable gate array, or FPGA, is a programmable logic IC whose interconnect and logic fabric can be configured after manufacture. The FPGA hierarchy runs from configurable logic blocks and programmable I/O to digital signal processing, embedded memory, high-speed serial links, clocking, and complete programmable systems. Unlike a fixed-function ASIC, an FPGA allows hardware behavior to be revised through a bitstream without changing the physical PCB. The Virtex-5 SXT platform is designed for high-performance programmable systems requiring substantial parallel processing. Key attributes include 52,224 logic cells, 360 configurable I/O, a 65 nm CMOS process, and operation from 0.95 V to 1.05 V. The FFG665 package exposes its terminals on the bottom of the device, making careful ball-grid-array layout and assembly essential. The industrial-temperature suffix identifies this configuration for operation from -40 °C to +100 °C. The -1 speed designation places the device in its nominal performance grade within the Virtex-5 family. Configuration, clock management, programmable signaling, and power management are integrated into the FPGA architecture, allowing a single device to implement complete control, acquisition, and communication functions. Typical applications include high-speed signal processing, industrial control, test and measurement equipment, communications infrastructure, aerospace and defense systems, and embedded video processing. The 360 available I/O support board-level connectivity, while the logic and DSP resources can execute parallel algorithms without a separate processor for every workload. A successful design must account for BGA assembly, bank-specific supply requirements, decoupling, configuration memory, clocking, and thermal performance. Use the AMD Virtex-5 package pinout files to assign every ball, and validate the selected I/O standard, voltage, and timing constraints against the device configuration before PCB release. This product page combines package, temperature, speed-grade, and logic-resource details with same-family replacement guidance and practical design notes. Those engineering comparisons help distinguish alternatives that preserve the FFG665 footprint from devices that require a different package or a redesigned board.

RFQ پەیوەندی
XC5VSX50T-2FF665C - 52,224 Logic Cell SXT FPGA | AMD
XC5VSX50T-2FF665C

XC5VSX50T-2FF665C - 52,224 Logic Cell SXT FPGA | AMD

The AMD XC5VSX50T-2FF665C is a Virtex-5 SXT field-programmable gate array with 52,224 logic cells, 4,080 configurable logic blocks, and 360 I/O sites in a 665-ball FCBGA package. It is a CMOS programmable-logic device designed for high-performance parallel processing, DSP, networking, communications, and embedded control systems. An FPGA is a semiconductor whose digital logic, interconnect, and I/O behavior are configured after manufacture using a bitstream. The Virtex-5 SXT family combines configurable logic blocks with dedicated DSP resources in a parallel architecture. It belongs to the broader FPGA and CPLD hierarchy within programmable-logic semiconductors, providing a flexible alternative to fixed-function ASICs for designs requiring adaptable hardware, rapid revision, and high I/O density. The device provides 52,224 logic cells and 4,080 configurable logic blocks, making it suitable for datapath-intensive designs rather than simple control-only functions. Its 360 I/O sites support integration with external memory, high-speed interfaces, clocks, and industrial peripherals. The manufacturer identifies the device as a Virtex-5 SXT FPGA, a product family associated with high-performance signal processing and communications workloads. The XC5VSX50T designation identifies the Virtex-5 SXT 50K device, while the -2 suffix denotes its specified performance class. The FF665C package is identified as a 665-ball FCBGA. Because the design must satisfy device-specific timing, voltage, thermal, decoupling, and pinout requirements, a replacement should be evaluated as a complete hardware and bitstream migration rather than by package appearance alone. Typical uses include telecommunications equipment, signal processing, industrial automation, high-speed data acquisition, embedded systems, and network infrastructure. The large logic and I/O resources allow multiple parallel processing channels to be consolidated into one programmable device. The exact architecture, block resources, configuration requirements, and package-pin assignments should be confirmed against the relevant AMD device documentation before schematic capture. PCB implementation requires careful ball-escape routing, controlled-length clock and differential-pair interconnects, and local power and ground-plane distribution. The exposed package structure and dense BGA geometry make assembly process control important. Designers should also reserve configuration, startup, clocking, and JTAG resources required by the selected FPGA design flow. This product page consolidates the verified device identity, package details, architecture facts, drop-in alternatives, comparison parameters, and implementation guidance. It supports faster component selection while preserving the need to validate timing, bitstream compatibility, thermal margins, and manufacturing constraints against the manufacturer documentation.

RFQ پەیوەندی
XC5VSX50T-2FF665I - 52K Logic FPGA | AMD | DSP
XC5VSX50T-2FF665I

XC5VSX50T-2FF665I - 52K Logic FPGA | AMD | DSP

The AMD XC5VSX50T-2FF665I is a Virtex-5 SXT field-programmable gate array with 52,224 logic elements, 4,080 configurable logic blocks, and 360 user I/O pins, supplied in a 665-ball FCBGA package measuring 27 x 27 mm. Its 65 nm CMOS construction and 1 V core supply make it a high-density programmable logic device for demanding parallel-processing, signal-processing, and high-speed connectivity designs. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic is defined after manufacture by loading a configuration bitstream. An FPGA belongs to the programmable-logic hierarchy alongside CPLDs, combines programmable logic blocks with configurable I/O, and is frequently used when fixed-function ASIC economics are unsuitable but hardware parallelism and reconfigurability are valuable. The Virtex-5 SXT family extends this concept into high-performance designs with substantial logic and serial connectivity resources. The XC5VSX50T-2FF665I provides 360 user I/O pins and 4,080 CLBs, supporting parallel interfaces and high pin-count system integration. Its -2 speed designation identifies the performance grade used in the ordering code. The 665-ball FCBGA package minimizes PCB footprint compared with larger leaded packages, but its dense ball pitch requires careful escape routing, controlled via distribution, and assembly capability appropriate for large BGAs. Technically, the device combines 52,224 logic elements with the Virtex-5 SXT architecture on a 65 nm CMOS process operating from a 1 V core supply. This combination supports designs that benefit from hardware parallelism, including video and image pipelines, network packet processing, scientific instrumentation, and interface aggregation. Configuration and implementation decisions must follow the AMD or Xilinx Vivado design flow, including pin constraints, timing closure, and validation of the selected configuration memory interface. Typical applications include high-speed data acquisition, telecommunications line-card processing, radar and industrial imaging, protocol bridging, and test-equipment signal generation. In each case, the value comes from implementing multiple parallel datapaths in programmable logic rather than using a sequence of discrete digital devices. Engineers should also assess the toolchain, bitstream-generation support, and long-term availability of the exact device before committing a new production design. A critical design consideration is the 665-ball BGA escape path. Route power, ground, configuration pins, clock-capacitor connections, and high-speed I/O according to the manufacturer's package data and reference design guidance. Provide multiple power and ground planes with via stitching near the device, and verify assembly warpage, paste volume, and reflow-profile requirements with the selected board assembler. This page combines device specifications, package details, same-footprint alternatives, and application-oriented engineering guidance to support component selection and PCB planning. Because FPGA sourcing decisions involve software-tool support, lifecycle plans, and board-level constraints in addition to headline logic counts, review the linked manufacturer and distributor records before releasing a production BOM.

RFQ پەیوەندی
XC5VSX50T-2FFG665C - 52,224-Cell SXT FPGA | AMD | FFG665
XC5VSX50T-2FFG665C

XC5VSX50T-2FFG665C - 52,224-Cell SXT FPGA | AMD | FFG665

AMD XC5VSX50T-2FFG665C is a Virtex-5 SXT field-programmable gate array with 52,224 logic cells, 65 nm CMOS technology, and a 665-pin FCBGA package. The device is offered in speed grade 2 for commercial-temperature applications and uses a 1 V supply. Its 360 inputs and 360 outputs support parallel connectivity for high-speed digital processing, programmable logic, interface bridging, and embedded system control. An FPGA is a reconfigurable semiconductor in which programmable logic blocks, I/O resources, memory, and dedicated circuitry are combined on one device. Within the semiconductor hierarchy, an FPGA belongs to the programmable-logic and CPLD family, but differs from simpler CPLDs through substantially greater logic density, dedicated block resources, high-speed I/O, and support for advanced clocking, serial connectivity, and processor-based architectures. The XC5VSX50T-2FFG665C combines 52,224 programmable logic cells with 65 nm CMOS process technology. Speed grade 2 identifies its performance class within the Virtex-5 SXT family. The 360 dedicated input and 360 output locations provide substantial board-level connectivity, while the FFG665 package supports dense designs requiring many power, ground, configuration, and signal pins. The manufacturer specifies a nominal 1 V operating supply for this device family. Virtex-5 SXT devices are designed for DSP, high-performance parallel processing, communications, networking, industrial control, and test equipment. Their large fabric supports concurrent datapaths, buffering, protocol handling, and control logic, while dedicated resources can accelerate suitable operations without moving every function into general-purpose logic. Actual implementation timing, power, and resource utilization depend on the selected clocking scheme, I/O standards, logic mapping, and final bitstream. Because the FFG665 package has 665 balls and only a manufacturer package-pinout resource is identified, board designers should use the AMD package files for authoritative signal assignment. Decoupling, power-plane segmentation, clock routing, and high-speed interface layout should follow the applicable Virtex-5 power, connectivity, and design-guideline documents rather than generic BGA practices. This page organizes the confirmed device identity, package, logic density, I/O count, process technology, supply information, sourcing paths, and same-family alternatives into an engineer-oriented reference. It also identifies the limits of available information: detailed pin naming, performance tables, package dimensions, and full compliance status should be confirmed in the current AMD package files and manufacturer documentation before release to production.

RFQ پەیوەندی
XC5VSX50T-2FFG665I - 52,224-Logic-Element SXT FPGA | AMD
XC5VSX50T-2FFG665I

XC5VSX50T-2FFG665I - 52,224-Logic-Element SXT FPGA | AMD

The AMD/Xilinx XC5VSX50T-2FFG665I is a Virtex-5 SXT field-programmable gate array with 52,224 logic elements, 4,080 configurable logic blocks, 288 DSP48E slices, 4,866,048 bits of block RAM, and 360 user I/O pins in a 665-FCBGA package measuring 27 x 27 mm. It is configured for demanding programmable-logic, digital signal processing, and high-speed serial connectivity applications. An FPGA is a semiconductor device whose digital functions are defined by loading a configuration bitstream rather than by permanently wiring a fixed logic circuit. The Virtex-5 SXT architecture belongs to the FPGA and programmable-logic hierarchy and combines configurable logic blocks, dedicated DSP48E arithmetic resources, block RAM, selectable I/O, and serial transceivers. This combination allows one device to implement parallel processing, control logic, packet handling, and high-speed physical-layer functions while retaining field reprogrammability. Key resources include 52,224 logic elements distributed across 4,080 CLBs, 288 DSP48E slices, 1,728 Kb of block RAM, and up to 480 user I/O according to the product listing summary. The dedicated DSP resources support parallel arithmetic and fixed-point signal-processing pipelines, while the block RAM provides on-chip storage for buffers, lookup tables, packet data, and digital filter state. The device also supports high-speed serial connectivity through 12 RocketIO GTP transceivers operating up to 6.5 Gb/s. The XC5VSX50T is positioned in the SXT portion of the Virtex-5 family, where the “T” denotes the transceiver-enabled configuration. Its combination of programmable logic, DSP48E processing, embedded RAM, and serial transceivers allows multiple subsystems to share one package. Designers can use serial interfaces for external data acquisition, network equipment, industrial control, test systems, defense-oriented processing, and communications infrastructure. Typical applications include telecom line cards, industrial data acquisition, radar and signal-processing front ends, network interface equipment, high-speed test equipment, embedded control systems, and digital communications platforms. The 360 user I/O support broad connectivity, while 288 DSP48E slices provide substantially more arithmetic throughput than a general-purpose logic-only implementation. The 665-FCBGA package requires careful PCB layout and thermal design because its large lead-free BGA footprint demands controlled assembly and return-path planning. For new designs, verify the complete pinout, configuration requirements, power rails, decoupling, and transceiver specifications against the AMD Virtex-5 documentation before layout. The G, F, V, and temperature-grade suffixes encode package, speed, voltage, and qualification distinctions; they must not be treated as interchangeable without checking the ordering guide. This page combines the product resources, drop-in alternatives, comparison information, and practical implementation guidance needed for initial device selection.

RFQ پەیوەندی
XC5VSX50T-3FFG665C - 52K SXT FPGA | AMD
XC5VSX50T-3FFG665C

XC5VSX50T-3FFG665C - 52K SXT FPGA | AMD

The AMD XC5VSX50T-3FFG665C is a Virtex-5 SXT field-programmable gate array with 52,224 logic cells, 360 I/O, 65 nm CMOS technology, and a 665-pin FCBGA package. Its nominal core voltage is 1 V, with an operating supply range of 0.95 V to 1.05 V. The -3 speed grade is intended for performance-oriented designs, while the commercial-temperature C suffix identifies a 0 °C to 85 °C operating-junction range. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and input/output resources are configured after fabrication. In the FPGA hierarchy, an FPGA belongs to the programmable-logic device family and combines configurable logic blocks with programmable routing resources. The Virtex-5 SXT platform is designed for demanding embedded systems requiring substantial parallel processing, high I/O density, and deterministic hardware implementation of complex algorithms. The XC5VSX50T combines 52,224 logic cells with 360 I/O in a 27 mm by 27 mm FCBGA package. This combination allows substantial connectivity to external memory, transceivers, processors, and custom application-specific circuitry. Its 65 nm CMOS process and 1 V core supply are important considerations for clock, power, thermal, and board-design planning. The -3 grade is the distinguishing performance option within this device family. Unlike a fixed-function ASIC, the FPGA allows logic revisions, configuration updates, and functional scaling without changing the PCB. A design can combine parallel datapaths, high-throughput interfaces, control logic, and protocol handling in one programmable device. The resource-rich SXT implementation is particularly useful where parallel lanes or multiple independent processing pipelines provide more value than minimizing device count. Typical uses include telecommunications and networking equipment, industrial control, test and measurement, medical imaging, signal processing, and embedded research platforms. The 360-I/O device can connect to external DDR memory and high-speed interfaces, while the large logic-cell count supports substantial control and datapath concurrency. PCB design should follow the AMD package pinout and board-planning guidance for this 665-FCBGA package. Pay particular attention to ball-grid escape routing, power and ground distribution, decoupling, thermal relief, and high-speed signal integrity. Configuration storage, startup sequencing, clocking, and decoupling must also be planned according to the device's published power-system guidance. This page combines device specifications, same-family drop-in options, comparison parameters, and application-focused engineering guidance to support component selection, board compatibility checks, and FPGA migration planning without relying solely on a basic catalog listing.

RFQ پەیوەندی
XC68HC912D60CFU8-FR - 16-Bit 60KB Flash MCU | NXP
XC68HC912D60CFU8-FR

XC68HC912D60CFU8-FR - 16-Bit 60KB Flash MCU | NXP

The NXP XC68HC912D60CFU8-FR is a 16-bit M68HC12 embedded microcontroller with 60 KB of flash memory, CPU12 processing, and connectivity described as CANbus, MI Bus, SCI, and SPI. The device is supplied in an 80-pin QFP package, with the verified ordering information identifying the XC68HC912D60CFU8 variant and the -FR ordering suffix. Its 60 KB flash figure identifies it as a program-memory-oriented MCU for embedded control systems requiring deterministic peripheral access and embedded software integration. An MCU is a semiconductor device that combines a processor core, program memory, data memory, peripherals, and communication interfaces on one integrated circuit. The M68HC12 family belongs to the embedded-microcontroller hierarchy, where a CPU executes firmware, reads inputs, controls outputs, and manages communication links. The XC68HC912D60CFU8-FR is positioned for industrial and embedded applications where CANbus, serial, SPI, or related interfaces are useful system building blocks. The verified product information identifies the MCU as using a 16-bit CPU12 core, 60 KB flash, 80-QFP packaging, and connectivity including CANbus, MI Bus, SCI, and SPI. The available search data does not provide verified RAM size, maximum CPU frequency, supply voltage, ADC specifications, timer details, operating-temperature grade, or absolute pin-level timing values for this exact suffix, so those parameters remain unspecified rather than inferred. The NXP datasheet search result also identifies related XC68HC912D60 package and temperature-grade orderings, which should be used as a basis for checking the final ordering code. Typical design roles include embedded motor and industrial controllers, CAN-connected equipment, serial-device control, SPI peripheral coordination, and compact control platforms requiring a 16-bit MCU architecture. The -FR suffix is an ordering designation associated with the supplied part number; package, temperature, and lead-finish details should be confirmed against the manufacturer ordering information before production release. Designers should preserve the exact 80-pin QFP footprint and verify pin multiplexing, power, ground, clock, debug, and communication assignments from the datasheet before layout release. Review the required CANbus, SCI, SPI, and MI Bus transceiver or peripheral connections, and confirm that the selected firmware, development tools, and memory map match the exact device variant. This page consolidates verified distributor and manufacturer-linked search data, the available datasheet references, ordering information, and engineering-selection guidance for engineers evaluating XC68HC912D60CFU8-FR.

RFQ پەیوەندی
XC6SLX100-2CSG484C - 101K Logic FPGA | AMD
XC6SLX100-2CSG484C

XC6SLX100-2CSG484C - 101K Logic FPGA | AMD

The AMD XC6SLX100-2CSG484C is a Spartan-6 LX family Field Programmable Gate Array (FPGA) with 101,261 logic cells, 338 user I/Os, and 4,939,776 RAM bits. The device is housed in a lead-free 484-CSPBGA (19x19 mm, 0.80 mm pitch) surface-mount package and operates from a 1.14V to 1.26V core supply. This configuration delivers a compact, high-density programmable logic solution for commercial-temperature (0C to 85C) systems. What is an FPGA? A Field Programmable Gate Array is an integrated circuit whose logic fabric can be configured after manufacturing to implement arbitrary digital functions. FPGAs sit above CPLDs in capacity and are often used for parallel processing, protocol bridging, and hardware acceleration. In a system hierarchy, the Spartan-6 LX family belongs to programmable logic devices, a subset of integrated circuits, and is widely used in communications, industrial automation, and video processing. Key features of XC6SLX100-2CSG484C include 7,911 CLBs, an internal frequency up to 667 MHz, 338 user configurable I/O pins, and 4,939,776 total block RAM bits. The -2 speed grade balances performance and power for cost-sensitive designs. The 484-ball CSPBGA package provides a 19x19 mm footprint with 0.80 mm pitch, making it suitable for space-constrained PCBs. Beneath the package, the Spartan-6 LX100 uses a 45nm CMOS process technology. This process enables high logic density and low static power, with core voltage around 1.2V. The FPGA includes dedicated clock management tile, DSP slices, and block RAM resources that can be used to build efficient digital signal processing pipelines, soft processors, and high-speed I/O interfaces. Typical applications include industrial automation controllers, telecom line cards, video and image processing, software-defined radio, and ASIC prototyping. The 338 I/O pins and abundant logic cells allow integration of multiple peripheral interfaces and custom processing engines on one device. When paired with DDR3 memory such as MT41K256M16HA-125:E or IS43TR16256AL-125KBL, the FPGA can implement high-bandwidth data buffers and packet processing. When designing with this component, plan the power delivery network carefully for the 1.14V to 1.26V core rail and respect the 0C to 85C junction temperature range. Decouple each supply pin and verify configuration memory selection before layout.

RFQ پەیوەندی
XC6SLX100-2FG484C - 101K-Logic Cell Spartan-6 FPGA | AMD
XC6SLX100-2FG484C

XC6SLX100-2FG484C - 101K-Logic Cell Spartan-6 FPGA | AMD

The AMD XC6SLX100-2FG484C is a Spartan-6 LX field-programmable gate array with 101,261 logic cells, 326 user I/O, and a 484-ball BGA package. It operates as a configurable parallel-processing semiconductor, combining programmable logic, block RAM, and digital clocking resources in one device. The package is identified by the verified distributor data as a 484-BBGA, and the Spartan-6 LX family is associated with 45 nm CMOS technology. A field-programmable gate array is a digital semiconductor whose logic, memory, and interconnect functions are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, which includes CPLDs, FPGA and CPLD devices, programmable-logic ICs, and semiconductors. Compared with a fixed-function application-specific integrated circuit, an FPGA allows parallel algorithms, interface protocols, timing, and control logic to be revised without changing the printed circuit board. The XC6SLX100-2FG484C provides 101,261 logic cells and 326 I/O in its 484-ball package. Verified family information reports an internal frequency of 667 MHz for the related 484-ball Spartan-6 LX ordering information. The -2 suffix identifies the device speed grade, while the FG484C portion identifies the package and commercial-temperature ordering code. These identifiers must be preserved when replacing the device because FPGA package pinouts, speed grades, and temperature ratings are not interchangeable by assumption. Its 101,261-cell capacity makes the device suitable for designs combining multiple parallel processing lanes rather than simple control functions. Available Spartan-6 LX resources can support high-throughput digital filtering, protocol bridging, embedded control, video-processing pipelines, and data acquisition when the design is implemented within the device's resource and speed limits. The 326 I/O count also provides substantial board-level connectivity, reducing the need for external interface components in systems that can use the available pins according to the AMD package pinout files. Typical applications include industrial automation, test and measurement equipment, communications interfaces, embedded video, robotics, and general-purpose instrumentation. Because the device is an FPGA rather than a microprocessor, firmware is not executed from a boot flash device. Instead, a bitstream defines the logic configuration and must be loaded into the FPGA according to the device's configuration architecture. Configuration storage, startup behavior, clocking, and JTAG access therefore remain important system-level design considerations. For reliable implementation, follow AMD's package pinout files and configuration guidance for the exact 484-ball land pattern. The board must also provide suitable decoupling, stable clocking, correct configuration startup behavior, and adequate power delivery. Although the verified listing identifies a 484-BBGA package, pin names and the complete 484-ball assignment are not included in the supplied data, so this page does not reproduce or infer them. This page combines verified distributor identification, price and availability references, package details, same-family drop-in candidates, and practical selection guidance. It also separates confirmed facts from parameters that require confirmation in the AMD Spartan-6 LX datasheet and official package files, helping engineers avoid unsupported substitutions.

RFQ پەیوەندی
XC6SLX100-2FG484I - Spartan-6 FPGA, 101261 Cells, 484-BBGA | AMD
XC6SLX100-2FG484I

XC6SLX100-2FG484I - Spartan-6 FPGA, 101261 Cells, 484-BBGA | AMD

The AMD XC6SLX100-2FG484I is a Spartan-6 LX field-programmable gate array with 101,261 logic cells, a 667 MHz internal frequency, and a 484-pin CSBGA package measuring 19 mm by 19 mm at 0.80 mm pitch. It uses 45 nm FPGA technology and a 1.2 V core supply, combining programmable logic, block RAM, digital signal processing resources, and programmable I/O in one high-density device. The -2 suffix identifies the Spartan-6 LX performance grade, while the I suffix identifies the industrial 0 to 85 °C temperature range. A field-programmable gate array is a semiconductor whose digital logic is configured after fabrication. FPGAs occupy the programmable-logic hierarchy alongside complex programmable logic devices and programmable system-on-chip devices. Unlike a fixed-function application-specific integrated circuit, an FPGA can implement parallel processing, control, interface, and signal-processing functions that are revised through programmable configuration rather than redesigning the integrated circuit. This makes the Spartan-6 LX family useful where architecture flexibility, deterministic parallel execution, or long product customization is important. The XC6SLX100-2FG484I provides 101,261 logic cells, 667 MHz internal frequency, and 484 package pins. Its 45 nm Spartan-6 LX implementation supports high-density designs using configurable logic and dedicated fixed-function blocks. The large I/O count accommodates interfaces to external memory, communications transceivers, converters, displays, sensors, and test equipment. The industrial temperature rating supports equipment intended for controlled industrial environments, although system designers must still manage junction temperature and board-level heat dissipation. The -2 speed grade is distinct from the -3 and -3N grades in the Spartan-6 LX family. The -3 grade offers the highest family performance, while the -2 grade provides a different balance of timing performance and system implementation considerations. The 484-pin CSBGA package requires careful PCB escape routing, power-plane design, via-in-pad or via-adjacent decoupling, and assembly-process control. AMD Spartan-6 package pinout resources should be used directly when assigning every power, ground, configuration, and user I/O connection. Typical applications include industrial control and automation, industrial Ethernet and serial networking, video and image processing, instrumentation, communications infrastructure, and embedded control systems. In each case, parallel programmable logic can implement parallel data paths, state machines, protocol handling, or custom accelerators. Configuration storage, clocking, power sequencing, and downloadable logic also make the device suitable for equipment requiring field updates after deployment. The primary design trade-off is package complexity. A 484-pin 19 mm CSBGA provides substantial connectivity but demands fine-pitch assembly, controlled impedance routing, and careful power and thermal planning. Before layout release, verify pin assignments against the AMD package pinout file, validate every power rail against the device requirements, and complete timing and thermal analysis for the intended clock and I/O conditions. This page combines exact device specifications, pin-compatible family alternatives, parameter comparisons, and practical PCB and design guidance. It is intended to accelerate component selection while preserving the engineering checks required for a complex programmable-logic device.

RFQ پەیوەندی