AT90CAN128-16AU
AT90CAN128-16AU - 16MHz AVR CAN MCU | Microchip Technology
The Microchip Technology AT90CAN128-16AU is an 8-bit AVR RISC microcontroller with a 16 MHz clock, 128 KB of ISP flash memory, and an integrated CAN controller in a 64-pin TQFP package. It combines 4 KB EEPROM, 4 KB SRAM, 53 general-purpose I/O lines, 32 working registers, two USARTs, an SPI interface, a byte-oriented two-wire interface, and real-time counter and timer resources for embedded control systems.
An 8-bit microcontroller is a compact computing device that integrates a processor core, memory, and peripherals on one semiconductor package. The AT90CAN128 belongs to the AVR enhanced RISC family and combines a controller hierarchy of microcontroller, embedded processor, and programmable logic device. Its CAN 2.0A and CAN 2.0B controller distinguishes it from general-purpose 8-bit MCUs by supporting deterministic message-based communication between distributed electronic modules.
Key features include 128 KB of in-system-programmable flash, 4 KB EEPROM, 4 KB SRAM, and a maximum clock frequency of 16 MHz. The device provides 53 general-purpose I/O lines and integrates two USARTs, SPI, a byte-oriented two-wire serial interface, eight ADC channels as reported by the product listing, and multiple timer/counter and PWM functions. Its operating supply range is listed as 2.7 V to 5.5 V, while the -16AU grade is identified as a 64-pin TQFP device.
The AVR enhanced RISC architecture supports efficient execution of the microcontroller's instruction set, making the AT90CAN128 appropriate for protocol handling, supervisory control, data acquisition, and actuator control. Integrated CAN capability reduces the need for a separate protocol controller, while the large flash and SRAM resources allow firmware for communication stacks and application logic to reside directly on the chip. The two USARTs support concurrent serial links to sensors, displays, or service interfaces.
Typical applications include industrial CAN nodes, automotive body and comfort modules, building automation endpoints, motor and actuator controllers, instrumentation gateways, and low-cost embedded CAN test equipment. The controller is particularly useful when several distributed nodes must exchange prioritized messages while a local microcontroller also handles timing, analog measurement, diagnostics, or user-interface functions.
Designers should pay close attention to CAN transceiver selection, bus termination, clock stability, decoupling, programming access, and the voltage limitations of each I/O pin. The 64-TQFP footprint is relatively pin-dense, so fanout and assembly planning should be completed before layout. Use the manufacturer's pin-description table and complete datasheet when assigning tracks, programming signals, analog inputs, and power pins.
This product page combines the manufacturer's core device description with package, memory, interface, and supply information, then adds application guidance, comparison criteria, and design-oriented cautions. It is intended to help engineers assess AT90CAN128-16AU suitability for CAN-connected embedded products without overlooking memory capacity, clock rate, package constraints, or lifecycle considerations.
RFQ
پەیوەندی