بەرهەمەکان (22,000+)

AT90CAN128-16MU - 16MHz 8-bit AVR MCU with CAN 128KB Flash | Microchip
AT90CAN128-16MU

AT90CAN128-16MU - 16MHz 8-bit AVR MCU with CAN 128KB Flash | Microchip

The Microchip AT90CAN128-16MU is a high-performance, low-power 8-bit AVR RISC-based microcontroller combining 128 KB In-System Programmable flash memory, 4 KB EEPROM, 4 KB SRAM, 53 general-purpose I/O lines, and an on-chip CAN 2.0A/2.0B controller. It executes 133 powerful instructions, mostly in a single clock cycle, and runs at up to 16 MHz from a 4.5 V to 5.5 V supply, packaged in a 64-pin QFN (9 mm x 9 mm) outline. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), working RAM, and a rich set of peripherals (timers, communication controllers, ADC, GPIO). The AT90CAN128 belongs to the AVR 8-bit RISC family, where RISC (Reduced Instruction Set Computer) emphasizes one-cycle execution to deliver high throughput per MHz. In a system hierarchy, this part sits at the edge node: it acquires sensor signals, runs control firmware, and bridges to higher-level networks (here, a CAN bus) for distributed real-time communication. Key features include four flexible Timer/Counters with compare and PWM modes, two USARTs, a byte-oriented Two-Wire Serial Interface (TWI/I²C-compatible), an 8-channel 10-bit ADC, a JTAG debug interface, and a Real-Time Counter with separate oscillator. The on-chip CAN controller supports both standard (11-bit) and extended (29-bit) identifiers, making the device ideal for in-vehicle networking and industrial fieldbus nodes. The 53 GPIO pins are organized into seven ports (PA–PG), and most pins offer programmable internal pull-ups. Typical applications include automotive body and chassis ECUs, industrial CAN-based sensor networks, building automation gateways, and any embedded design requiring deterministic on-board communication plus generous Flash headroom for protocol stacks such as CANopen or DeviceNet. Its 128 KB of Flash also accommodates bootloader-based field upgrades. A practical design consideration is the 4.5 V to 5.5 V supply window: the part is not natively 3.3 V-tolerant, so level shifting is required when interfacing with 3.3 V peripherals. Designers should also follow the datasheet reference decoupling scheme (100 nF per VCC pin plus bulk capacitance) and respect the exposed-pad thermal pad connection on the QFN to minimize junction temperature. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving you a one-stop engineering reference for the AT90CAN128-16MU.

RFQ پەیوەندی
AT90CAN128-ESAZ - 128KB AVR CAN Microcontroller | Microchip
AT90CAN128-ESAZ

AT90CAN128-ESAZ - 128KB AVR CAN Microcontroller | Microchip

The Microchip Technology AT90CAN128-ESAZ is an 8-bit AVR RISC microcontroller with 128 KB of ISP flash memory, 4 KB EEPROM, 4 KB SRAM, and 53 general-purpose I/O lines in a 64-QFN package. It integrates a CAN 2.0A/2.0B controller, two USARTs, a byte-oriented Two-wire Serial Interface, four flexible timer/counters with PWM support, and a real-time counter for embedded control applications. An 8-bit microcontroller is a programmable semiconductor that executes firmware from embedded flash memory while using I/O pins to interface with sensors, actuators, communication transceivers, and human-machine interfaces. The AT90CAN128 belongs to the AVR enhanced RISC family and combines single-cycle instruction execution with integrated CAN networking. Its architecture is intended to provide efficient deterministic control for industrial, transportation, communications, and embedded automation systems. Principal features include 128 KB of in-system-programmable flash with read-while-write operation, 4 KB of EEPROM for nonvolatile configuration data, and 4 KB of SRAM for working memory. The device provides 53 general-purpose I/O lines and 32 general-purpose working registers. Two USARTs, one Two-wire Serial Interface, four timer/counters, PWM channels, and a CAN controller reduce the need for external peripheral devices in connected embedded systems. The enhanced AVR RISC architecture executes powerful instructions within a single clock cycle, allowing the AT90CAN128 family to approach 1 MIPS of throughput per megahertz under appropriate operating conditions. In-System Programming supports programming and configuration through the device interface. The CAN block supports both CAN 2.0A and CAN 2.0B frame formats, while the real-time counter provides a dedicated timing resource independent of the main timer/counter workload. Typical applications include industrial CAN gateways, vehicle and transportation modules, building-automation controllers, remote monitoring equipment, CAN-connected sensors, motor-control systems, and industrial data-acquisition equipment. The integrated communication peripherals allow a compact design to connect a microcontroller node to a CAN physical-layer transceiver while retaining substantial local processing capability. Designers should match the external CAN transceiver to the bus voltage and termination requirements, isolate transceiver supply as appropriate, and account for the package's exposed thermal-pad layout during PCB assembly. Firmware development should also validate clock startup, interrupt priorities, watchdog behavior, and CAN error handling before deployment in a safety-relevant or high-availability network. This page combines the AT90CAN128-ESAZ memory, communication, interface, and package characteristics with drop-in alternatives, application guidance, and practical hardware-design considerations. It supports faster engineering evaluation by separating the MCU's onboard resources from the external transceiver, clock, memory, and power-supply requirements of a complete CAN node.

RFQ پەیوەندی
AT90CAN32-15AT - 32KB AVR CAN MCU, 15MHz | Microchip Technology
AT90CAN32-15AT

AT90CAN32-15AT - 32KB AVR CAN MCU, 15MHz | Microchip Technology

The Microchip Technology AT90CAN32-15AT is an 8-bit AVR RISC automotive microcontroller with a 15 MHz maximum clock, 32 KB of flash memory, and an integrated CAN controller in a 64-pin TQFP package. It operates from 4.5 V to 5.5 V and provides 53 general-purpose I/O lines for automotive and industrial CAN-node designs. An automotive microcontroller is a dedicated semiconductor that combines a processor core, nonvolatile program memory, data memory, peripheral controllers, and communication interfaces on one integrated circuit. The AT90CAN32 belongs to the AVR 8-bit RISC family, with the CAN controller placing it within the broader embedded-control and CAN-node product hierarchy. Its architecture combines an 8-bit data bus with an enhanced RISC instruction set designed for efficient control-oriented processing. Key features include 32 KB of flash program memory, 2 KB of SRAM, 1 KB of EEPROM, 53 general-purpose I/O lines, 32 general-purpose working registers, and 133 powerful instructions. The integrated CAN controller supports CAN 2.0A and CAN 2.0B protocols, allowing the device to communicate with other CAN nodes without an external protocol controller. The 15 MHz operating speed provides a practical balance between processing throughput, power consumption, and system responsiveness. The AT90CAN32-15AT uses an 8-bit AVR RISC architecture with read-while-write flash capability. Its memory organization supports embedded firmware, configuration data, and nonvolatile calibration or parameter storage. The CAN peripheral, general-purpose I/O, timers, and serial interfaces allow a single controller to supervise a vehicle or industrial subsystem while handling communications and time-critical control tasks. Typical applications include automotive body-control modules, dashboard and instrument-cluster electronics, diagnostic equipment, industrial CAN gateways, embedded CAN sensors, and service equipment. The 64-pin TQFP package provides access to 53 I/O lines, making the device suitable for systems that need more peripheral connectivity than a smaller microcontroller package can offer. For PCB design, use the pin-description table in the Microchip Technology datasheet when assigning tracks and decoupling. Provide the specified supply voltage at every power pin, route CAN RX and TX according to the recommended transceiver interface, and include adequate local bypass capacitance to limit supply transients. This page consolidates the device identity, operating limits, package details, drop-in family alternatives, application guidance, and design notes needed for initial component selection. Firmware migration should still be validated against the manufacturer datasheet, errata, CAN timing requirements, and the exact automotive qualification criteria required by the end application.

RFQ پەیوەندی
AT90CAN32-15AT1 - 15MHz 32KB AVR CAN MCU | Microchip
AT90CAN32-15AT1

AT90CAN32-15AT1 - 15MHz 32KB AVR CAN MCU | Microchip

The Microchip Technology AT90CAN32-15AT1 is an 8-bit AVR RISC microcontroller with a 15 MHz clock, 32 KB of ISP flash memory, an integrated CAN controller, and a 64-pin TQFP package. It is designed for industrial embedded systems that require deterministic communication, low-power operation, and a broad set of peripheral interfaces. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O ports, timers, and communication peripherals on one device. The AT90CAN32 belongs to the AVR 8-bit microcontroller family, a branch of embedded processors used in industrial control, automotive electronics, instrumentation, and CAN-connected equipment. Its enhanced RISC architecture supports efficient instruction execution while retaining a relatively simple programming model. The AT90CAN32-15AT1 operates at 15 MHz and includes 32 KB of ISP flash, 1 KB of EEPROM, and 2 KB of SRAM. The manufacturer describes the AT90CAN32 family as providing 53 general-purpose I/O lines, 32 working registers, and a CAN controller. Its TQFP-64 package exposes the complete mixed-signal and communication interface set while supporting conventional surface-mount PCB assembly. The integrated CAN controller is the principal technical distinction from a general-purpose 8-bit AVR. It allows the controller to participate in standardized vehicle or industrial networks without requiring a separate CAN transceiver. Designers still need an external transceiver for physical-layer signaling, but the MCU handles frame handling, filtering, interrupts, and higher-level CAN operation. ISP flash supports in-system programming, while EEPROM preserves calibration, configuration, or serial-number data across power cycles. Typical uses include CAN-based industrial controllers, vehicle body and dashboard modules, diagnostic equipment, sensor gateways, motor-control subsystems, and low-power embedded instruments. The 15 MHz operating point provides useful computation margin for protocol handling and control tasks, while the 53 I/O lines allow multiple sensors, actuators, status indicators, and communications peripherals to share one controller. PCB design should preserve the decoupling requirements, clock stability, programming access, and CAN signal routing described in the manufacturer datasheet. Place input and output capacitors close to the device, route the clock network away from noisy switching nodes, and provide a clean transceiver interface for the CAN TX and RX signals. The TQFP footprint also needs adequate solder-mask and thermal-via planning for reliable manufacturing. This product page combines the manufacturer family information with package, memory, speed, and replacement context. It also organizes practical guidance for CAN termination, firmware migration, decoupling, and PCB layout so engineers can evaluate the AT90CAN32-15AT1 before integrating it into a new embedded design.

RFQ پەیوەندی
AT90CAN32-15AZ - 8-bit AVR MCU, 16MHz, 32KB Flash, CAN, 64-Pin TQFP | Microchip Technology
AT90CAN32-15AZ

AT90CAN32-15AZ - 8-bit AVR MCU, 16MHz, 32KB Flash, CAN, 64-Pin TQFP | Microchip Technology

The Microchip Technology AT90CAN32-15AZ is an 8-bit AVR RISC-based CMOS microcontroller, automotive-grade, integrating 32KB of in-system programmable Flash, 1KB EEPROM, and 2KB SRAM in a 64-pin TQFP package. It supports clock speeds up to 16MHz (15MHz speed grade suffix) and operates over a 2.7V to 5.5V supply range, with an automotive temperature grade of -40C to +125C. An 8-bit AVR microcontroller is a Harvard-architecture, single-cycle RISC processor optimized for deterministic embedded control. AVR MCUs belong to the broader category of microcontrollers (MCU) -> embedded processors -> semiconductors. The AT90CAN32-15AZ specifically belongs to the AT90CAN family, distinguished by an integrated CAN 2.0A/V2.0B (V2.0B compliant) controller that differentiates it from general-purpose AVR chips such as the ATmega series. Key features of the AT90CAN32-15AZ include: 53 general-purpose I/O lines, 32 general-purpose working registers, an 8-channel 10-bit ADC, advanced communication peripherals (CAN, I2C, SPI, UART/USART), and standard AVR on-chip peripherals including Brown-out Detect/Reset, Power-on Reset, PWM, and a Watchdog Timer. The CAN controller provides hardware frame handling, reducing host CPU overhead in distributed control networks. The AVR enhanced RISC architecture executes most instructions in a single clock cycle, delivering throughput approaching 1 MIPS per MHz. The automotive-grade designation (-AZ suffix) reflects qualification to AEC-Q100 standards, enabling deployment in powertrain, body, and chassis electronic control units. The wide supply voltage range allows direct operation from both 3.3V and 5V rails commonly found in automotive ECUs. Typical applications include automotive body control modules, CAN-based sensor networks, industrial CAN nodes, vehicle lighting controllers, and HVAC actuators. The integrated CAN peripheral eliminates the need for an external CAN controller, reducing BOM cost and PCB area in space-constrained modules. When designing with this device, ensure proper decoupling (100nF + 10uF) near the AVCC/AVSS analog supply pins, follow Microchip AN2461 for CAN bus termination, and verify the JTAG/debug pin assignments before laying out the PCB to avoid conflicts with general-purpose I/O. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design guidance not consolidated in the manufacturer datasheet. Cross-references against AT90CAN64-15AZ, AT90CAN32-15AT, and AT90CAN128-15AZ confirm the same 64-pin TQFP footprint across the AT90CAN32/64/128 family.

RFQ پەیوەندی
AT90CAN32-15MT - 32KB AVR CAN MCU, 15MHz | Microchip
AT90CAN32-15MT

AT90CAN32-15MT - 32KB AVR CAN MCU, 15MHz | Microchip

The Microchip Technology AT90CAN32-15MT is an 8-bit AVR RISC automotive microcontroller with a 15 MHz clock, 32KB of flash program memory, and a 64-QFN 9 x 9 mm package. It combines 53 general-purpose I/O lines, an integrated CAN controller, and low-power CMOS operation for embedded networking, vehicle electronics, and industrial control systems. An 8-bit microcontroller is a programmable semiconductor containing a processor core, memory, peripherals, and I/O ports on one device. The AT90CAN32 belongs to the AVR 8-bit MCU hierarchy, which provides a compact computing platform for control logic, communication protocols, data acquisition, and embedded automation. Its CAN controller allows the device to communicate reliably over a standardized differential network without requiring a separate CAN controller. Key features include 32KB of flash memory, 2KB of SRAM, 1KB of EEPROM, 53 general-purpose I/O lines, and 32 general-purpose working registers. The MPN suffix identifies a 15 MHz device in the automotive AT90CAN32 family. The 64-QFN package provides a compact surface-mount solution, while the exposed-pad package is suitable for automated board assembly and controlled thermal management. The AT90CAN32 uses the AVR enhanced RISC architecture and executes most instructions within a single clock cycle. Its integrated CAN controller supports CAN 2.0A and CAN 2.0B communication, while its general-purpose I/O and memory resources allow local sensing, actuator control, protocol handling, and state-machine execution. The exact operating limits and electrical characteristics for this ordering code should be confirmed against the manufacturer datasheet before production release. Typical applications include automotive body and comfort modules, CAN-based industrial controllers, distributed equipment nodes, diagnostic interfaces, actuator controllers, and embedded CAN gateways. The combination of CAN connectivity, 53 I/O lines, and embedded flash makes the device appropriate where a local control loop must also participate in a vehicle or industrial network. PCB design should preserve the manufacturer-specified decoupling network, CAN transceiver interface, exposed-pad soldering pattern, and clock layout. Confirm the exact pin assignments, external component values, and electrical ratings from the AT90CAN32-15MT pin-description table before assigning tracks or selecting companion circuitry. This product page consolidates the exact MPN specifications, pin-compatible family alternatives, CAN-focused application guidance, and practical PCB considerations. It is designed to support engineering selection, schematic review, PCB planning, and sourcing without replacing the manufacturer datasheet.

RFQ پەیوەندی
AT90CAN32-15MZ - 16MHz 32KB Flash CAN MCU | Microchip
AT90CAN32-15MZ

AT90CAN32-15MZ - 16MHz 32KB Flash CAN MCU | Microchip

The Microchip AT90CAN32-15MZ is an 8-bit AVR RISC automotive microcontroller with a 15 MHz maximum clock, 32 KB of ISP flash memory, an integrated CAN controller, and a 64-QFN 9 x 9 mm package. The device provides 53 general-purpose I/O lines and supports operation from a 4.5 V to 5.5 V supply, making it suitable for 5 V automotive and industrial CAN nodes that require compact packaging and CAN connectivity. An 8-bit AVR microcontroller is a microcontroller built around the enhanced AVR RISC architecture. It combines program flash, data EEPROM, SRAM, general-purpose I/O, timers, serial interfaces, and embedded CAN control in one integrated circuit. In the broader semiconductor hierarchy, the AT90CAN32 belongs to the microcontroller and embedded-controller category, where deterministic peripheral integration reduces the component count required for a CAN node. The AT90CAN32-15MZ provides 32 KB of flash, 1 KB of EEPROM, 2 KB of SRAM, 32 general-purpose working registers, and 53 I/O lines according to the Microchip product information. Its integrated CAN controller supports CAN versions 2.0A and 2.0B, while the 4.5 V to 5.5 V operating range places it in the conventional 5 V MCU category rather than low-voltage 3.3 V-only designs. Its automotive-grade ordering designation supports AEC-Q100-oriented qualification workflows. The AVR architecture uses a modified Harvard architecture and executes most instructions in one clock cycle, supporting efficient control-loop and protocol-handling workloads. The integrated CAN peripheral reduces the need for an external controller, while the 64-QFN package limits board area. The 15 MHz suffix denotes the maximum clock grade, and the 32 KB flash grade is intended for firmware volumes that do not require the larger memory configurations available in the related AT90CAN64 and AT90CAN128 families. Typical uses include automotive body and comfort modules, industrial CAN gateways, diagnostic adapters, sensor nodes, actuator controllers, and CAN-connected instrumentation. In these systems, the MCU can manage local I/O and protocol traffic while the integrated CAN controller handles frame transmission, reception, filtering, and error management according to the supported CAN controller versions. Designers should verify the exact 64-QFN land pattern, exposed-pad connection, pin multiplexing, and automotive qualification requirements against the manufacturer datasheet before layout release. The 5 V supply requirement must also be met throughout the vehicle or industrial system, and the PCB should provide suitable decoupling, ground-return continuity, and CAN-transceiver protection even though the transceiver is external to the MCU. This product page consolidates the verified manufacturer specifications, current distributor pricing, same-package AVR alternatives, and application-oriented engineering guidance. It also distinguishes verified attributes from parameters that require confirmation from the complete Microchip datasheet, supporting faster sourcing without presenting unverified electrical or package data as fact.

RFQ پەیوەندی
AT90CAN32-16AU - 16MHz 8-Bit CAN MCU | Microchip
AT90CAN32-16AU

AT90CAN32-16AU - 16MHz 8-Bit CAN MCU | Microchip

The Microchip Technology AT90CAN32-16AU is an 8-bit AVR RISC microcontroller with a 16 MHz maximum clock, 32 KB of flash memory, and an integrated CAN controller, housed in a 64-TQFP package measuring 14 mm by 14 mm. It combines 2 KB SRAM, 1 KB EEPROM, 53 general-purpose I/O lines, and 32 general-purpose working registers in a low-power CMOS device designed for embedded CAN systems. An 8-bit microcontroller is a programmable semiconductor that executes firmware, reads inputs, controls outputs, and manages system interfaces. Within the product hierarchy, the AT90CAN32 is an MCU, a microcontroller IC, and a member of the AVR family of embedded processors. Its CAN controller adds a standardized vehicle-style communication interface, allowing the device to exchange messages with other CAN nodes rather than requiring a separate protocol controller. The AT90CAN32-16AU combines 32 KB of in-system programmable flash with read-while-write capability, 1 KB of EEPROM, and 2 KB of SRAM. The 16 MHz operating speed gives the enhanced RISC architecture throughput approaching 1 MIPS per MHz, while 53 general-purpose I/O lines support digital interfaces, sensors, actuators, and communication peripherals. The integrated CAN controller supports CAN V2.0A and CAN V2.0B operation. The device uses the AVR enhanced RISC architecture and an 8-bit CPU with 32 general-purpose working registers. Its in-system programming interface supports firmware updates without removing the microcontroller from the circuit. The automotive-oriented -16AU ordering code identifies the 16 MHz configuration in the 64-pin TQFP package, while the core architecture remains suitable for compact CAN nodes requiring deterministic control and low-power embedded processing. Typical applications include automotive body and powertrain interface modules, industrial CAN gateways, elevator and building-control controllers, robotics coordination nodes, and telemetry equipment. In each case, the MCU can process local sensors and actuators while exchanging diagnostic, command, or status messages through its integrated CAN controller. Design the PCB with adequate clearance around all 64 leads, route the oscillator and programming signals carefully, and follow the manufacturer pin-description table before assigning every signal. Confirm oscillator characteristics, reset behavior, supply sequencing, and CAN transceiver requirements against the manufacturer datasheet for the intended voltage and temperature range. This product page combines manufacturer specifications, exact package and memory details, practical application guidance, and a parameter-focused comparison with pin-compatible AT90CAN family options. It is designed to help engineers evaluate the AT90CAN32-16AU, verify its 64-TQFP footprint, identify meaningful capacity differences, and select the appropriate source for quotation and availability.

RFQ پەیوەندی
AT90CAN32-16AUR - 16MHz 8-Bit CAN MCU | Microchip (Tape & Reel)
AT90CAN32-16AUR

AT90CAN32-16AUR - 16MHz 8-Bit CAN MCU | Microchip (Tape & Reel)

The Microchip Technology AT90CAN32-16AUR is an 8-bit AVR RISC microcontroller with a 16 MHz maximum clock, 32 KB of flash memory, and an integrated CAN controller, housed in a 64-TQFP package measuring 14 mm by 14 mm. It combines 2 KB SRAM, 1 KB EEPROM, 53 general-purpose I/O lines, and 32 general-purpose working registers in a low-power CMOS device designed for embedded CAN systems. An 8-bit microcontroller is a programmable semiconductor that executes firmware, reads inputs, controls outputs, and manages system interfaces. Within the product hierarchy, the AT90CAN32 is an MCU, a microcontroller IC, and a member of the AVR family of embedded processors. Its CAN controller adds a standardized vehicle-style communication interface, allowing the device to exchange messages with other CAN nodes rather than requiring a separate protocol controller. The AT90CAN32-16AUR combines 32 KB of in-system programmable flash with read-while-write capability, 1 KB of EEPROM, and 2 KB of SRAM. The 16 MHz operating speed gives the enhanced RISC architecture throughput approaching 1 MIPS per MHz, while 53 general-purpose I/O lines support digital interfaces, sensors, actuators, and communication peripherals. The integrated CAN controller supports CAN V2.0A and CAN V2.0B operation. The device uses the AVR enhanced RISC architecture and an 8-bit CPU with 32 general-purpose working registers. Its in-system programming interface supports firmware updates without removing the microcontroller from the circuit. The automotive-oriented -16AU ordering code identifies the 16 MHz configuration in the 64-pin TQFP package, while the core architecture remains suitable for compact CAN nodes requiring deterministic control and low-power embedded processing. Typical applications include automotive body and powertrain interface modules, industrial CAN gateways, elevator and building-control controllers, robotics coordination nodes, and telemetry equipment. In each case, the MCU can process local sensors and actuators while exchanging diagnostic, command, or status messages through its integrated CAN controller. Design the PCB with adequate clearance around all 64 leads, route the oscillator and programming signals carefully, and follow the manufacturer pin-description table before assigning every signal. Confirm oscillator characteristics, reset behavior, supply sequencing, and CAN transceiver requirements against the manufacturer datasheet for the intended voltage and temperature range. This product page combines manufacturer specifications, exact package and memory details, practical application guidance, and a parameter-focused comparison with pin-compatible AT90CAN family options. It is designed to help engineers evaluate the AT90CAN32-16AUR, verify its 64-TQFP footprint, identify meaningful capacity differences, and select the appropriate source for quotation and availability.

RFQ پەیوەندی
AT90CAN32-16MU - 16MHz AVR CAN MCU | Microchip Technology
AT90CAN32-16MU

AT90CAN32-16MU - 16MHz AVR CAN MCU | Microchip Technology

The Microchip Technology AT90CAN32-16MU is an 8-bit AVR RISC microcontroller with a 16 MHz clock, 32 KB of flash program memory, and an integrated CAN controller in a 64-QFN (9 x 9 mm) package. It is designed for compact embedded systems that require CAN communication alongside UART, I2C, SPI, timers, and general-purpose I/O. The device operates from a 4.5 V to 5.5 V supply and provides 53 general-purpose I/O lines. A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication peripherals, and I/O into one package. The AT90CAN32 belongs to the AVR family of 8-bit RISC microcontrollers and sits within the broader embedded-control hierarchy of microcontroller ICs. Its enhanced RISC architecture supports efficient instruction execution, while dedicated CAN hardware reduces the processing burden associated with communicating over a robust vehicle or industrial network. The AT90CAN32 family combines CAN controller support with read-while-write flash operation, EEPROM, and SRAM. The -16MU configuration is specified for 16 MHz operation and includes 32 KB of flash. Its communication peripherals allow one controller to coordinate CAN traffic with serial, synchronous, and serial peripheral interfaces. Brown-out detection, reset, pulse-width modulation, and watchdog functions support dependable control-system behavior. The 53 I/O lines provide substantial connectivity for sensors, actuators, status indicators, and external interface circuits. This controller is particularly suitable for industrial automation, building controls, automotive subsystems, embedded data acquisition, motor-control interfaces, and CAN-connected sensors. Its 64-QFN package supports compact board layouts, but the exposed thermal-pad and exposed-pad requirements should be followed exactly. The small pitch also makes careful PCB trace planning essential for reliable assembly and testability. When designing around the AT90CAN32-16MU, confirm the external clock, CAN transceiver, termination, decoupling, programming interface, and reset circuitry against the manufacturer datasheet. A CAN bus requires a physical transceiver such as the SN65HVD37D, and correct termination at both ends of the network is necessary for reliable operation. Firmware should also include CAN error handling, bus-off recovery, and watchdog service routines. This product page combines the manufacturer specifications, documented package characteristics, practical interface guidance, and verified drop-in substitution information. It is intended to help engineers determine whether the 16 MHz AVR CAN controller matches the required memory, interface, package, and environmental constraints before committing a board design to production.

RFQ پەیوەندی
AT90CAN32-16MUR - 16MHz AVR CAN MCU | Microchip Technology (Tape & Reel)
AT90CAN32-16MUR

AT90CAN32-16MUR - 16MHz AVR CAN MCU | Microchip Technology (Tape & Reel)

The Microchip Technology AT90CAN32-16MUR is an 8-bit AVR RISC microcontroller with a 16 MHz clock, 32 KB of flash program memory, and an integrated CAN controller in a 64-QFN (9 x 9 mm) package. It is designed for compact embedded systems that require CAN communication alongside UART, I2C, SPI, timers, and general-purpose I/O. The device operates from a 4.5 V to 5.5 V supply and provides 53 general-purpose I/O lines. A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication peripherals, and I/O into one package. The AT90CAN32 belongs to the AVR family of 8-bit RISC microcontrollers and sits within the broader embedded-control hierarchy of microcontroller ICs. Its enhanced RISC architecture supports efficient instruction execution, while dedicated CAN hardware reduces the processing burden associated with communicating over a robust vehicle or industrial network. The AT90CAN32 family combines CAN controller support with read-while-write flash operation, EEPROM, and SRAM. The -16MU configuration is specified for 16 MHz operation and includes 32 KB of flash. Its communication peripherals allow one controller to coordinate CAN traffic with serial, synchronous, and serial peripheral interfaces. Brown-out detection, reset, pulse-width modulation, and watchdog functions support dependable control-system behavior. The 53 I/O lines provide substantial connectivity for sensors, actuators, status indicators, and external interface circuits. This controller is particularly suitable for industrial automation, building controls, automotive subsystems, embedded data acquisition, motor-control interfaces, and CAN-connected sensors. Its 64-QFN package supports compact board layouts, but the exposed thermal-pad and exposed-pad requirements should be followed exactly. The small pitch also makes careful PCB trace planning essential for reliable assembly and testability. When designing around the AT90CAN32-16MUR, confirm the external clock, CAN transceiver, termination, decoupling, programming interface, and reset circuitry against the manufacturer datasheet. A CAN bus requires a physical transceiver such as the SN65HVD37D, and correct termination at both ends of the network is necessary for reliable operation. Firmware should also include CAN error handling, bus-off recovery, and watchdog service routines. This product page combines the manufacturer specifications, documented package characteristics, practical interface guidance, and verified drop-in substitution information. It is intended to help engineers determine whether the 16 MHz AVR CAN controller matches the required memory, interface, package, and environmental constraints before committing a board design to production.

RFQ پەیوەندی
AT90CAN64-15AT - 64KB AVR CAN Microcontroller | Microchip
AT90CAN64-15AT

AT90CAN64-15AT - 64KB AVR CAN Microcontroller | Microchip

The Microchip Technology AT90CAN64-15AT is an 8-bit AVR RISC microcontroller with 64KB of ISP flash memory, 4KB SRAM, 2KB EEPROM, 53 general-purpose I/O lines, and an integrated CAN controller in a 64-lead TQFP package. It is specified for 4.5V to 5.5V operation and an automotive-oriented part configuration, making it suitable for vehicle network nodes, body controllers, dashboard electronics, and industrial CAN gateways. An 8-bit microcontroller is a programmable integrated circuit built around a compact processor core, embedded memory, and dedicated peripheral blocks. The AT90CAN64 belongs to the AVR 90CAN family, combining Microchip's AVR RISC architecture with a CAN protocol controller. This hierarchy places the device between a general-purpose MCU and a dedicated CAN transceiver: the MCU processes frames and controls logic, while an external CAN transceiver converts the digital CAN TXD and RXD signals to a physical bus. Key features include 64KB of flash for read-while-write operation, 2KB of EEPROM for nonvolatile parameters, and 4KB of SRAM for working data. The 53 I/O lines provide substantial connectivity for sensors, switches, actuators, indicators, and status inputs. A 64-lead TQFP package also exposes the complete peripheral set while remaining compatible with automated board assembly and multilayer PCB layouts. The device uses 32 general-purpose working registers and supports 16-bit instruction word execution, balancing throughput with low-power operation. Its integrated CAN controller supports standard CAN communication tasks, including frame handling and status monitoring, while timers, serial interfaces, and other MCU peripherals support periodic control, sensor acquisition, diagnostics, and external communication. Typical uses include automotive body and comfort modules, CAN-based diagnostic equipment, elevator and industrial machinery controllers, building automation interfaces, and embedded telemetry nodes. The 5V supply range and 64-pin footprint make AT90CAN64-15AT especially suitable for established 5V CAN-control designs that require more memory and I/O capacity than entry-level 8-bit MCUs. When laying out the PCB, place the MCU decoupling capacitors and oscillator components close to their associated pins, and route the CAN RXD and TXD connections away from noisy switching nodes. Confirm the transceiver logic levels, termination placement, and firmware clock configuration before production release. These steps reduce signal-integrity risk in multi-node CAN networks.

RFQ پەیوەندی
AT90CAN64-15AT1 - 15MHz 64KB CAN AVR MCU | Microchip
AT90CAN64-15AT1

AT90CAN64-15AT1 - 15MHz 64KB CAN AVR MCU | Microchip

The Microchip Technology AT90CAN64-15AT1 is an 8-bit AVR RISC microcontroller with a 15 MHz clock, 64 KB of flash memory, an integrated CAN controller, and 53 general-purpose I/O lines in a 64-pin TQFP package. It combines a 4.5 V to 5.5 V operating range with in-system programming and read-while-write flash capabilities for embedded control systems. An 8-bit AVR microcontroller is a compact reduced-instruction-set computer optimized for embedded control. The AVR architecture executes most instructions in a single clock cycle and provides 32 general-purpose working registers. When combined with an embedded CAN controller, this device belongs to the communication-focused microcontroller hierarchy used for distributed industrial, automotive, and control-system nodes that need deterministic messaging over a multi-node bus. The AT90CAN64-15AT1 provides 64 KB of program flash, 2 KB of EEPROM, and 4 KB of SRAM according to the Microchip product-page description. Its integrated CAN controller supports CAN 2.0A and CAN 2.0B communication formats. The 53 general-purpose I/O lines support digital interfaces and peripheral functions, while the 15 MHz operating speed provides additional processing headroom for protocol handling, diagnostics, and supervisory control tasks. The device uses Microchip's AVR architecture with 133 instructions and 32 general-purpose working registers. Its 64-pin TQFP package exposes the GPIO, communication, timing, and programming resources needed for a standalone CAN node. The automotive-oriented ordering code is identified as AEC-Q100 qualified in the component data for AT90CAN64-15AT1, although qualification details should be checked against the exact ordering-code table before production release. Typical uses include industrial CAN gateways, automotive body and powertrain control modules, elevator and building-control nodes, instrumentation, motor-control supervisory electronics, and diagnostic tools. Its combination of 53 I/O lines, serial peripherals, and CAN support reduces the need for external interface logic in compact embedded controllers. For PCB design, preserve the manufacturer's recommended decoupling and clock layout, provide programming access for ISP, and route CAN RX and TX with controlled impedance. Check the complete TQFP pin-assignment table in the manufacturer datasheet before assigning multiplexing functions or planning a footprint revision. This page consolidates the key electrical limits, communication capabilities, pinout considerations, and engineering trade-offs into a practical selection reference for AT90CAN64-15AT1 designs.

RFQ پەیوەندی
AT90CAN64-15AZ - 64KB 15MHz CAN AVR MCU | Microchip
AT90CAN64-15AZ

AT90CAN64-15AZ - 64KB 15MHz CAN AVR MCU | Microchip

The Microchip AT90CAN64-15AZ is an 8-bit AVR RISC microcontroller with 64KB of ISP flash memory, a 15 MHz maximum clock, an integrated CAN controller, and a 64-pin TQFP package. It combines embedded flash, EEPROM, SRAM, general-purpose I/O, and serial peripherals in one device for compact CAN-connected control systems. An 8-bit AVR microcontroller is a reduced-instruction-computer device whose registers, arithmetic unit, and instruction set are optimized for efficient embedded control. The AVR architecture executes many instructions in a single clock cycle, while the AT90CAN64 family adds a CAN 2.0A/2.0B controller for communication between embedded nodes. This places the device within the hierarchy of semiconductor, microcontroller, embedded processor, and CAN-capable embedded controller. Key device attributes include 64KB of ISP flash memory with read-while-write capability, 2KB of EEPROM, 4KB of SRAM, and an integrated CAN controller. The -15 speed designation corresponds to a 15 MHz operating frequency. The 64-pin TQFP package provides a conventional surface-mount footprint with gull-wing leads, while the integrated CAN controller reduces the need for a separate protocol controller in connected industrial, automotive, or equipment-control designs. The AT90CAN64 family uses the AVR enhanced RISC architecture and provides general-purpose registers, timer resources, serial interfaces, and programmable I/O for embedded-control tasks. Its CAN controller supports CAN 2.0A and CAN 2.0B message formats, allowing the MCU to participate in standardized controller-area-network communication while local firmware handles acquisition, actuation, diagnostics, and system supervision. Typical uses include industrial machine controllers, automotive body and accessory modules, CAN-based sensor gateways, industrial communication adapters, and compact embedded control boards. These applications benefit from the combination of local flash execution, EEPROM for persistent configuration, SRAM for working data, and integrated CAN handling. A separate CAN transceiver is still required to connect the MCU's logic-level CAN pins to a physical CAN bus. Design around the 4.5 V to 5.5 V supply range, provide all specified decoupling and clock circuitry, and use the manufacturer pin-description table when assigning PCB tracks. Because the CAN interface operates through a bus transceiver, its pin voltage ratings, termination strategy, isolation requirements, and grounding scheme must be handled separately from the MCU supply design. This product page combines the manufacturer's device information with practical package, power, communication, and selection guidance. It also distinguishes speed and temperature-grade alternatives while keeping every proposed replacement tied to the same 64-pin TQFP footprint.

RFQ پەیوەندی
AT90CAN64-15MT - 16MHz 64KB AVR CAN MCU | Microchip Technology
AT90CAN64-15MT

AT90CAN64-15MT - 16MHz 64KB AVR CAN MCU | Microchip Technology

The Microchip Technology AT90CAN64-15MT is a 16 MHz, 8-bit AVR RISC microcontroller with 128KB ISP flash memory, read-while-write capability, 2KB EEPROM, 4KB SRAM, 53 general-purpose I/O lines, and an integrated CAN controller. It is housed in a 64-pin plastic QFN package. The AT90CAN64 family combines an advanced RISC architecture, 133 instructions, and dedicated CAN communication in a low-power embedded-control device. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, I/O ports, and peripheral functions on one package. The AT90CAN64 belongs to the hierarchy of 8-bit RISC microcontroller, embedded controller, and programmable logic device. Its integrated CAN controller allows a design to communicate on an automotive or industrial CAN network without requiring a separate CAN transceiver. The controller is identified as compliant with CAN 2.0A and CAN 2.0B. The family combines 128KB of ISP flash with read-while-write operation, 2KB of EEPROM, and 4KB of SRAM. In-system programming supports programming after the device has been mounted on a board. A 53-line general-purpose I/O interface provides connections for sensors, actuators, control signals, and communications peripherals. The target ordering code is identified as the industrial-temperature 16 MHz version in a 64-terminal no-lead package. The device is based on Microchip's high-performance, low-power 8-bit AVR RISC architecture. Its instructions include most single-clock-cycle operations, while 32 general-purpose working registers support efficient execution of embedded control tasks. The CAN controller, parallel I/O, serial interfaces, and memory architecture make the family appropriate for controllers that must coordinate distributed equipment over a robust two-wire CAN network. Typical uses include automotive body and gateway modules, industrial automation controllers, CAN-connected sensors, building equipment, and diagnostic interfaces. In these systems, the MCU can execute control logic locally while exchanging status, commands, and diagnostic information with other CAN nodes. The 64-pin QFN format supports dense PCB layouts but requires careful escape routing and exposed-pad thermal management. Designers should use the manufacturer pin description when assigning PCB nets and should preserve the recommended programming, clock, reset, and CAN interface connections. Power sequencing, decoupling, clock stability, and exposed-pad soldering materially affect reliability. Because a wrong peripheral connection can disable programming or communications, validate the schematic and PCB against the manufacturer datasheet before release. This page combines the verified device identity, architecture, memory, I/O, package, lifecycle, and selection information with practical CAN-system guidance. It also distinguishes exact drop-in candidates from same-family alternatives so engineers can assess replacement risk before committing a board revision.

RFQ پەیوەندی
AT90CAN64-15MT1 - 15MHz AVR CAN MCU | Microchip Technology
AT90CAN64-15MT1

AT90CAN64-15MT1 - 15MHz AVR CAN MCU | Microchip Technology

The Microchip Technology AT90CAN64-15MT1 is an 8-bit AVR RISC microcontroller with a 15 MHz operating clock, 64 KB of flash memory and an integrated CAN controller, housed in a 64-QFN 9x9 mm package. It is designed for embedded control systems that require deterministic CAN communication, compact PCB area and low-power CMOS operation. An 8-bit microcontroller is a programmable semiconductor that executes embedded firmware while integrating memory, I/O, timers and communication peripherals onto one device. The AT90CAN64 belongs to the hierarchy of AVR microcontrollers, 8-bit RISC processors, embedded processors and semiconductor components. Its integrated CAN controller makes it suitable for distributed industrial, transportation and control networks where a dedicated external CAN transceiver would otherwise be required. The AT90CAN64-15MT1 provides 64 KB of flash, 4 KB of SRAM, 2 KB of EEPROM, 53 general-purpose I/O lines and 32 general-purpose working registers. The manufacturer identifies the family as an AVR enhanced RISC architecture capable of executing instructions in a single clock cycle. This combination provides useful processing headroom for protocol handling, supervisory logic, data acquisition and local control functions. CAN support is the principal system-level benefit. The controller supports frame transmission, reception, filtering and fault handling, while external transceiver circuitry converts the controller's logic-level signals into the physical CAN bus waveform. Integrating the controller alongside the AVR core reduces board area and simplifies firmware organization compared with a discrete processor and CAN interface. Typical uses include industrial supervisory controllers, automotive and transportation modules, building automation nodes, remote instrumentation, CAN-connected sensors and compact embedded gateways. A 15 MHz clock provides sufficient throughput for many control tasks while keeping the device in the low-power 8-bit MCU class. Designs should still verify timing margins under the highest CAN bus load and the worst-case firmware execution path. PCB implementation requires careful treatment of the 64-QFN footprint, exposed thermal pad, power and ground distribution, clock stability and CAN transceiver signal integrity. Keep the CAN bus and differential routing away from high-current switching nodes, provide the decoupling and bulk capacitance recommended by the manufacturer, and use a continuous ground plane where practical. Confirm the exposed-pad solder and assembly requirements for the selected manufacturing process. This page combines manufacturer specifications, package details, engineering guidance and clearly qualified drop-in alternatives to support component selection, PCB planning and sourcing. It also distinguishes confirmed electrical differences involving clock speed, memory capacity and device density so engineers can validate each substitution against the original design requirements.

RFQ پەیوەندی
AT90CAN64-15MZ 15MHz 128KB Flash CAN MCU 64-QFN
AT90CAN64-15MZ

AT90CAN64-15MZ 15MHz 128KB Flash CAN MCU 64-QFN

The Microchip Technology AT90CAN64-15MZ is an 8-bit AVR RISC-based microcontroller with 128 KB of ISP flash memory, read-while-write capability, 2 KB EEPROM, 4 KB SRAM, 53 general-purpose I/O lines, and a CAN controller in a 64-QFN package. It operates from 4.5 V to 5.5 V and is rated for a 16 MHz clock speed according to the product listing. An 8-bit AVR microcontroller is a compact embedded-processing device that combines a RISC processor core, program memory, data memory, peripherals, and I/O in one integrated circuit. The AT90CAN64 family belongs to the AVR embedded-controller hierarchy and is designed for control systems that need deterministic peripheral handling together with embedded serial communication. Key features include 128 KB of ISP flash, 2 KB of EEPROM, 4 KB of SRAM, 53 general-purpose I/O lines, 32 general-purpose working registers, 133 powerful instructions, and a CAN controller identified as compliant with CAN V2.0A and V2.0B. The 15 MHz grade provides the device's stated clock-speed class, while the broad I/O count supports external sensors, actuators, communication transceivers, and human-interface circuitry. The MCU architecture supports single-clock-cycle execution for many instructions and provides a close relationship between the AVR processor, the CAN peripheral, and embedded serial programming. This combination makes the device useful in industrial control, automotive communication modules, building equipment, instrumentation, and other CAN-connected embedded products where an 8-bit controller is sufficient. Typical designs use the CAN controller with an external CAN transceiver, connect programming signals through ISP, and route the 53 I/O lines to application-specific interfaces. The 4.5 V to 5.5 V operating range is compatible with conventional 5 V embedded systems, although designers should confirm all timing, peripheral, and communication requirements against the manufacturer datasheet before production release. A key design consideration is to preserve clean supply and ground distribution around the 64-QFN device. Place decoupling capacitance close to the supply pins, route high-current and switching nodes away from sensitive inputs, and validate CAN bus termination, transceiver standby behavior, and firmware timing in the complete system rather than relying only on the MCU block diagram. This page combines manufacturer specifications, application guidance, verified comparison options, and practical design considerations to help engineers evaluate the AT90CAN64-15MZ for embedded CAN systems.

RFQ پەیوەندی
AT90CAN64-16AU - 8-Bit AVR CAN MCU, 16MHz, 64KB Flash | Microchip Technology
AT90CAN64-16AU

AT90CAN64-16AU - 8-Bit AVR CAN MCU, 16MHz, 64KB Flash | Microchip Technology

The Microchip Technology AT90CAN64-16AU is an 8-bit AVR enhanced RISC microcontroller with 64 KB of in-system-programmable flash memory, 4 KB EEPROM, 4 KB SRAM, 53 general-purpose I/O lines and an integrated CAN 2.0A/2.0B controller, clocked at up to 16 MHz from a single 4.5 V to 5.5 V supply and packaged in a 64-pin TQFP. An 8-bit microcontroller is a compact processing core, memory set and peripheral block built on a single CMOS die, positioned below 32-bit processors in raw arithmetic power but far above them in simplicity, deterministic interrupt latency and low power consumption. The CAN (Controller Area Network) protocol is a multi-master, message-based bus standard originally developed for vehicle networks; it allows many nodes to share two wires using arbitration by identifier, so a CAN-equipped MCU can talk to sensors, actuators and gateways without a separate bus controller chip. Key features of the AT90CAN64-16AU include 16 MHz maximum clock speed with most instructions executed in a single clock cycle, an on-chip CAN controller compliant with both CAN 2.0A and CAN 2.0B, four flexible timer/counters with compare and PWM modes, two USARTs, an SPI interface, a real-time counter and a 10-bit ADC with 8 multiplexed channels. Read-while-write capable flash allows firmware to be updated in circuit through the ISP interface. Internally, the device follows the AVR enhanced RISC architecture with 32 general-purpose working registers and an instruction set of 133 powerful instructions, most executing in one cycle. The result is throughput approaching 1 MIPS per MHz, which lets a design keep a CAN node responsive while handling protocol stacks and diagnostics. Separate 64 KB flash, 4 KB EEPROM and 4 KB SRAM regions allow calibration and configuration data to be stored independently of application code. Typical applications include industrial CAN-to-serial and CAN-to-Ethernet gateways, automotive body and comfort modules, elevator and building automation controllers, instrumentation clusters, battery management and charger controllers, and motor drive supervisory logic where a deterministic field bus is required and a 32-bit processor would be over-specified. When designing around this device, budget the 4.5 V to 5.5 V supply window carefully and remember that the CAN transceiver is external: the MCU drives TXD and receives RXD, while bus protection, galvanic isolation and termination are handled by a separate CAN transceiver such as the SN65HVD37D. Confirm the pin-multiplexing of the 53 I/O lines in the pin-description table of the manufacturer datasheet before assigning board functions. This page consolidates the manufacturer specifications, package and pin resources, drop-in replacement options from the same AT90CAN32/64/128 family, and practical design notes on CAN bus layout, decoupling and firmware strategy into a single engineering reference.

RFQ پەیوەندی
AT90CAN64-16AUR - 16MHz 64KB CAN AVR MCU | Microchip
AT90CAN64-16AUR

AT90CAN64-16AUR - 16MHz 64KB CAN AVR MCU | Microchip

Microchip Technology AT90CAN64-16AUR is an 8-bit AVR RISC microcontroller with a 16 MHz clock, 64 KB of in-system programmable Flash, 64 KB of program memory, and CAN controller capability in a 64-TQFP 14 x 14 mm package. The device is designed for embedded systems that require deterministic control, serial communications, and CAN networking. The -16AUR ordering code identifies the 16 MHz device, the A temperature grade, and the tape-and-reel packaging option. An AVR microcontroller is an embedded-processing IC that combines a CPU core, Flash program memory, SRAM, timers, serial peripherals, interrupt handling, and general-purpose I/O in one device. The AT90CAN64 family adds a CAN controller to the AVR architecture, placing it between a general-purpose 8-bit microcontroller and a communications-focused embedded controller. Its 53 general-purpose I/O lines support digital interfaces, sensors, actuators, and human-machine interfaces. Key features include Read-While-Write Flash operation, 2 KB EEPROM, 4 KB SRAM, 53 general-purpose I/O lines, 32 general-purpose working registers, a real-time counter, four flexible timer/counter blocks with compare modes and PWM, two USARTs, and a byte-oriented two-wire serial interface. The integrated CAN controller supports automotive and industrial communication designs where robust message-based networking is required. The 16 MHz operating frequency gives the AVR core a practical balance between processing throughput, power consumption, and peripheral timing. AT90CAN64 devices execute AVR instructions with an architecture designed for efficient embedded control, while the dedicated timer and serial resources allow multiple communication and timing tasks to be handled without relying entirely on software polling. The CAN peripheral is particularly useful when several embedded nodes must exchange prioritized, framed messages over a shared network. Typical applications include CAN-based automotive modules, industrial monitoring equipment, building and access-control systems, instrumentation, robotics controllers, and CAN-connected sensor or actuator nodes. The 64-TQFP package provides enough I/O and peripheral access for systems requiring more connectivity than a small 8- or 16-pin AVR device can offer, while remaining suitable for automated board assembly and compact embedded products. Design consideration: confirm transceiver requirements, bus termination, crystal or clock configuration, programming access, and exposed-pin assignments against the manufacturer datasheet before layout. CAN bus signal integrity also depends on the external transceiver, protection network, wiring, and termination rather than on the microcontroller alone. This page combines manufacturer feature information, distributor references, package details, practical application guidance, and carefully qualified drop-in alternatives.

RFQ پەیوەندی
AT90CAN64-16MU - 16MHz AVR CAN 64KB MCU | Microchip
AT90CAN64-16MU

AT90CAN64-16MU - 16MHz AVR CAN 64KB MCU | Microchip

The Microchip Technology AT90CAN64-16MU is an 8-bit AVR RISC microcontroller with a 16 MHz clock, 64 KB of internal flash memory, and an integrated CAN controller in a 64-QFN 9 x 9 mm package. It is designed for industrial embedded systems that require deterministic CAN communication, substantial program memory, and a compact surface-mount footprint. The device provides 53 general-purpose I/O lines and follows the AT90CAN32/64/128 family's hardware-compatible architecture. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O in one device. The AT90CAN64 belongs to the 8-bit microcontroller hierarchy, combining an AVR enhanced RISC core with embedded flash, EEPROM, SRAM, timers, serial interfaces, and a CAN controller. This integration allows a single controller to handle application logic and bus communication without requiring a separate communications processor. The AT90CAN64-16MU operates from a 4.5 V to 5.5 V supply at up to 16 MHz and provides 64 KB of ISP flash memory with read-while-write capability, 2 KB of EEPROM, and 4 KB of SRAM. Its 53 general-purpose I/O lines support digital sensing, actuators, status indicators, and external bus interfacing. The integrated CAN controller is compliant with CAN V2.0A and CAN V2.0B, providing a practical foundation for CAN-based industrial, transportation, and embedded control networks. Execution performance comes from the AVR enhanced RISC architecture, whose instructions commonly execute in a single clock cycle. The resulting throughput approaches 1 MIPS per MHz, helping designers optimize processing speed against power consumption. The exact target variant is identified as an industrial-temperature 16 MHz device with 64 KB of flash in a 64-QFN package. Typical uses include CAN gateway controllers, industrial sensor nodes, motor and actuator controllers, instrumentation, automotive body electronics, and communication bridges. Its combination of 53 I/O lines and 64 KB flash allows protocol handling and local control logic to coexist on one device, reducing component count and board area. For PCB design, follow the Microchip AT90CAN32/64/128 datasheet for the 64-QFN land pattern, exposed-pad connection, power pins, clock requirements, and decoupling guidance. Pay particular attention to CAN transceiver interface timing, termination placement, grounding, and firmware initialization because the MCU does not include the physical CAN transceiver. This page combines the exact AT90CAN64-16MU ordering information, family-level architecture, drop-in family alternatives, application guidance, and design considerations to help engineers evaluate the device before releasing a PCB or production BOM.

RFQ پەیوەندی
AT90CAN64-16MUR - 16MHz AVR CAN 64KB MCU | Microchip (Tape & Reel)
AT90CAN64-16MUR

AT90CAN64-16MUR - 16MHz AVR CAN 64KB MCU | Microchip (Tape & Reel)

The Microchip Technology AT90CAN64-16MUR is an 8-bit AVR RISC microcontroller with a 16 MHz clock, 64 KB of internal flash memory, and an integrated CAN controller in a 64-QFN 9 x 9 mm package. It is designed for industrial embedded systems that require deterministic CAN communication, substantial program memory, and a compact surface-mount footprint. The device provides 53 general-purpose I/O lines and follows the AT90CAN32/64/128 family's hardware-compatible architecture. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O in one device. The AT90CAN64 belongs to the 8-bit microcontroller hierarchy, combining an AVR enhanced RISC core with embedded flash, EEPROM, SRAM, timers, serial interfaces, and a CAN controller. This integration allows a single controller to handle application logic and bus communication without requiring a separate communications processor. The AT90CAN64-16MUR operates from a 4.5 V to 5.5 V supply at up to 16 MHz and provides 64 KB of ISP flash memory with read-while-write capability, 2 KB of EEPROM, and 4 KB of SRAM. Its 53 general-purpose I/O lines support digital sensing, actuators, status indicators, and external bus interfacing. The integrated CAN controller is compliant with CAN V2.0A and CAN V2.0B, providing a practical foundation for CAN-based industrial, transportation, and embedded control networks. Execution performance comes from the AVR enhanced RISC architecture, whose instructions commonly execute in a single clock cycle. The resulting throughput approaches 1 MIPS per MHz, helping designers optimize processing speed against power consumption. The exact target variant is identified as an industrial-temperature 16 MHz device with 64 KB of flash in a 64-QFN package. Typical uses include CAN gateway controllers, industrial sensor nodes, motor and actuator controllers, instrumentation, automotive body electronics, and communication bridges. Its combination of 53 I/O lines and 64 KB flash allows protocol handling and local control logic to coexist on one device, reducing component count and board area. For PCB design, follow the Microchip AT90CAN32/64/128 datasheet for the 64-QFN land pattern, exposed-pad connection, power pins, clock requirements, and decoupling guidance. Pay particular attention to CAN transceiver interface timing, termination placement, grounding, and firmware initialization because the MCU does not include the physical CAN transceiver. This page combines the exact AT90CAN64-16MUR ordering information, family-level architecture, drop-in family alternatives, application guidance, and design considerations to help engineers evaluate the device before releasing a PCB or production BOM.

RFQ پەیوەندی
AT90CAN64-ESAZ - 16MHz AVR CAN MCU | Microchip Technology
AT90CAN64-ESAZ

AT90CAN64-ESAZ - 16MHz AVR CAN MCU | Microchip Technology

Microchip Technology AT90CAN64-ESAZ is an 8-bit AVR RISC microcontroller with a CAN controller, 64KB of In-System Programmable Flash, 4KB SRAM, 2KB EEPROM, and 53 general-purpose I/O lines, supplied in a 64-pin TQFP package. It operates from 2.7V to 5.5V and is based on the low-power CMOS AVR enhanced RISC architecture. The integrated CAN controller makes this device suitable for industrial, automotive, and embedded systems that exchange data over a robust two-wire CAN network. An 8-bit AVR microcontroller is a compact embedded-control platform that executes instructions from nonvolatile Flash while using SRAM for working data and EEPROM for parameters that must survive power loss. Within the product hierarchy, the AT90CAN64 belongs to the AVR family of RISC microcontrollers and combines general-purpose embedded processing with a dedicated CAN protocol controller. Its 32 general-purpose working registers support an efficient register-based programming model. Key features include 64KB of read-while-write ISP Flash, 4KB of SRAM, 2KB of EEPROM, 53 general-purpose I/O lines, and a maximum clock frequency of 16MHz. Four flexible timer/counter blocks provide compare and PWM functions, while two USARTs and a byte-oriented Two-wire Serial interface support multiple serial communication channels. These peripherals reduce the need for external interface ICs in CAN-connected control nodes. The AT90CAN64 architecture provides 133 powerful instructions, with most instructions executing in a single clock cycle. Read-while-write Flash allows the application to remain operational while nonvolatile code or data is updated through the ISP interface. A separate CAN controller handles message objects, filtering, and bus protocol processing, while the AVR core manages application logic and general-purpose I/O. Typical uses include CAN-based industrial control modules, vehicle or transportation subsystems, building automation equipment, sensor gateways, motor controllers, and diagnostic interfaces. The combination of 53 I/O lines and two USARTs is particularly useful for nodes that must monitor several discrete inputs while communicating over both CAN and RS-232 or RS-485 equipment. Designers should verify the exact pin functions, clock source, reset requirements, and transceiver interface against the manufacturer datasheet. A CAN bus still requires an external CAN transceiver; the AT90CAN64 provides the digital controller but not the physical bus driver. Decoupling, grounding, and PCB layout should preserve CAN signal integrity and minimize noise coupling into sensitive measurements. This product page consolidates verified manufacturer specifications, distributor availability, same-family drop-in candidates, and practical selection guidance. It also distinguishes documented electrical and memory characteristics from parameters that still require confirmation for a production design.

RFQ پەیوەندی
AT90CAN64-ESMZ - 64KB AVR CAN MCU | Microchip Technology
AT90CAN64-ESMZ

AT90CAN64-ESMZ - 64KB AVR CAN MCU | Microchip Technology

The Microchip Technology AT90CAN64-ESMZ is an 8-bit AVR RISC microcontroller with 64KB of in-system programmable flash, 2KB of EEPROM, 4KB of SRAM, and an integrated CAN controller in a 64-QFN package. It operates from a 2.7V to 5.5V supply and provides 53 general-purpose I/O lines plus 32 general-purpose working registers. An 8-bit microcontroller is a programmable semiconductor that executes instructions from embedded flash memory and uses peripherals to control electronic systems. The AVR enhanced RISC architecture combines a compact instruction set with low-power CMOS operation. In the wider product hierarchy, the AT90CAN64 is an 8-bit microcontroller, an embedded processing IC, and a member of Microchip's AVR 90CAN family. Its integrated CAN controller makes it suitable for distributed industrial, automotive, and control systems that require robust communication between nodes. The AT90CAN64-ESMZ combines 64KB of ISP flash with read-while-write capability, allowing firmware to remain available while embedded code is updated. Its 2KB EEPROM supports nonvolatile configuration and calibration data, while 4KB of SRAM provides working memory for protocol stacks and real-time control. The device also offers two USARTs, a byte-oriented two-wire serial interface, four flexible timer/counter blocks, and a real-time counter according to the AT90CAN32/64/128 family datasheet. The 53 general-purpose I/O lines make the device useful in designs that need both control signals and communications in one package. The CAN controller handles frame-based network communication, while the USARTs support independent serial links to sensors, programmers, or other controllers. The 2.7V to 5.5V operating range accommodates both 3.3V and 5V equipment while supporting designs that need a transition between the two voltage domains. Typical uses include CAN-connected industrial controls, automotive body and subsystem controllers, building automation nodes, motor-control equipment, instrument panels, and embedded data loggers. A network node can place the AT90CAN64-ESMZ beside a CAN transceiver, use its timers for periodic control tasks, and retain configuration in EEPROM. This integration reduces the need for separate memory, serial-interface, and real-time timer components in a compact control board. Designers should preserve the required input, output, programming, reset, and clock circuitry from the manufacturer datasheet and confirm the exact exposed-pad and thermal-layout requirements before release. Firmware should include CAN termination, fault handling, watchdog discipline, and brownout behavior appropriate to the installed CAN network. Software compatibility must be validated because a footprint-compatible component does not automatically guarantee identical peripheral behavior. This product record combines verified manufacturer specifications, distributor availability, price information, same-family alternatives, and practical CAN-system design guidance. It also distinguishes package and temperature-grade differences that are essential when evaluating a true drop-in replacement rather than merely a functionally similar microcontroller.

RFQ پەیوەندی
AT90USB1286-AU 16MHz 128KB USB AVR MCU | Microchip Technology
AT90USB1286-AU

AT90USB1286-AU 16MHz 128KB USB AVR MCU | Microchip Technology

The Microchip Technology AT90USB1286-AU is an 8-bit AVR RISC microcontroller with a 16 MHz clock, 128 KB of ISP flash memory, and an integrated USB 2.0 device controller in a 64-pin TQFP package. It provides 48 general-purpose I/O lines, 8 KB of SRAM, and 4 KB of EEPROM for firmware, working data, and configuration storage. An AVR microcontroller is an 8-bit reduced-instruction-set computing platform designed for embedded control. The AT90USB1286 combines the AVR core with USB connectivity, serial interfaces, timers, and general-purpose I/O, placing it within the hierarchy of 8-bit MCU, embedded microcontroller, and embedded processing semiconductor. Its integrated USB controller allows a compact peripheral design without requiring a separate USB interface IC. Key features include read-while-write flash, USB low-speed and full-speed operation, a USART, a byte-oriented two-wire serial interface, four flexible timer/counter blocks with compare and PWM modes, 32 general-purpose working registers, and a real-time counter. The USB controller supports full-speed operation up to 12 Mbit/s and low-speed operation up to 1.5 Mbit/s, making the device suitable for USB-connected human-interface, control, and data-acquisition equipment. The enhanced AVR architecture executes instructions in a single clock cycle, supporting efficient time-driven control and event processing. Read-while-write flash allows the firmware to update data while the program continues operating from flash. Digital communication resources support USB connectivity alongside conventional serial expansion, while the timer blocks provide timing, capture, compare, and PWM functions for motor, lighting, and signal-generation circuits. Typical applications include USB keyboards and mice, industrial human-interface panels, USB data-acquisition equipment, embedded control modules, instrumentation, and custom USB peripheral adapters. The 48 I/O lines offer substantial interface capacity for sensors, displays, relays, and digital controls, while the 128 KB memory footprint accommodates protocol stacks, bootloaders, and application firmware. PCB design should preserve access to the programming and debug interfaces while keeping sensitive USB and clock routing compact. Confirm the required operating voltage, decoupling requirements, crystal configuration, and USB transceiver connection against the manufacturer datasheet before releasing the layout. This page combines the core MCU capabilities, package details, application guidance, replacement assessment, and engineering design considerations needed to evaluate the AT90USB1286-AU for a new embedded USB design.

RFQ پەیوەندی