Power Management
ژێرپۆلەکان
بەرهەمەکان (2,800+)
TPS25814RSMR - USB Type-C Controller with Integrated Source Power Switch | Texas Instruments
The Texas Instruments TPS25814RSMR is a stand-alone USB Type-C controller with an integrated source power switch, housed in a 32-pin VQFN (RSM) 4x4 mm package. It performs cable plug and orientation detection for one USB Type-C connector and, upon cable detection completion, enables the internal power path compliant with the USB Type-C specification. The device integrates VBUS short protection on the CC pins and supports status indicator outputs that may be used to control an external multiplexer. A USB Type-C controller is a specialized power management IC (PMIC) that manages the USB Type-C attachment, orientation (CC1/CC2 polarity), and cable role detection. It sits between the system power supply (typically a 5V rail) and the USB Type-C connector, negotiating VBUS current advertisement and protecting the system from fault conditions on the connector pins. The TPS25814 belongs to the USB interface IC hierarchy: USB Type-C controller -> USB interface IC -> interface IC -> power management IC -> semiconductor. Key features include integrated source power switch with current limiting, USB Type-C cable detection, VBUS short-to-VBUS and short-to-GND protection on CC pins, two status indicator outputs (PORT and CABLE), and a wide input supply range from 4.5V to 36V. The device also offers thermal shutdown, reverse-current blocking, and an industry-standard VQFN-32 footprint that simplifies PCB layout for compact Type-C source applications. The TPS25814 uses a smart detection state machine that monitors the CC1 and CC2 pins to detect attach, orientation, and Type-C accessory modes, then advertises the configured current to the sink device. The integrated N-channel MOSFET source switch with low on-resistance minimizes power dissipation during VBUS delivery, while the built-in protection circuitry guards against ESD and over-current events common in user-facing ports. Typical applications include USB Type-C source ports in industrial PCs, single-board computers, USB-C wall adapters, automotive infotainment USB ports, and any system requiring a simple 5V VBUS source from a Type-C receptacle. The device is commonly used in printer docking stations, point-of-sale terminals, and embedded computing modules where a small-footprint, fully integrated Type-C source is required. When designing with this device, ensure input capacitance meets USB Type-C source requirements (typically 10uF minimum on VBUS) and select appropriate current advertisement pull-up values for default-current, medium-current, or high-current modes. The PORT and CABLE indicator pins can drive external LEDs or GPIOs to inform the host MCU about attachment state without additional I/O expanders. This page synthesizes distributor pricing, drop-in same-brand variants, and practical design considerations not consolidated in the manufacturer datasheet, giving engineers a single reference for sourcing, replacement, and application guidance.
TPS25820DSST USB Type-C Source Controller | 1.5A VBUS Switch | Texas Instruments
The Texas Instruments TPS25820DSST is a USB Type-C source controller and integrated 1.5 A VBUS power switch with VCONN support. It operates from a 4.5 V to 5.5 V supply and is packaged in a 12-pin WSON (DSS) surface-mount package rated for -40°C to +125°C. The device combines USB Type-C source-port control, VBUS switching, and VCONN support in one compact controller for USB Type-C power-source applications. A USB Type-C source controller is an interface IC that manages the behavior of a USB Type-C port configured as a source or downstream-facing port. It coordinates the CC and VCONN signaling required for USB Type-C power-advertisement and accessory detection while an integrated power switch controls current on the VBUS rail. In the broader hierarchy, the TPS25820DSST is a USB interface controller, power-management IC, and integrated power switch. The main verified features include a 4.5 V to 5.5 V operating supply range, an integrated 1.5 A-rated USB VBUS power switch, 12-pin WSON packaging, and an extended -40°C to +125°C temperature range. The integrated switch can reduce the number of separate power-path components required in a compact Type-C source design, while the controller provides the device-level functionality required to negotiate a Type-C connection. The TPS25820DSST is positioned for compact USB Type-C source designs where VBUS current is limited to the integrated 1.5 A switch rating. Its 3 mm by 2 mm WSON package supports high-density PCB layouts, but careful placement of input, output, ground, and exposed-pad connections is important for electrical performance and heat spreading. The operating range of -40°C to +125°C makes the device suitable for designs intended to operate across industrial temperature conditions. Typical applications include USB Type-C docking stations, compact USB Type-C power adapters, multiport chargers, laptop and tablet accessories, and embedded USB Type-C equipment that supplies up to 1.5 A on VBUS. System designers should verify the complete USB Type-C power profile, connector requirements, cable current rating, thermal conditions, and protection requirements before production release. For a new layout, place the VBUS input and switched VBUS output paths with short, low-impedance copper connections, and provide the local bypass and input/output capacitors required by the manufacturer datasheet. Confirm that downstream loads, inrush behavior, and cable length do not exceed the verified operating limits. The integrated switch simplifies the power path, but it does not remove the need for correct USB Type-C signaling and thermal design. This product record combines the verified manufacturer and distributor information with package-specific replacement analysis and engineering-oriented design guidance. It is intended to help engineers distinguish true same-footprint alternatives from functionally similar devices that require PCB changes.
TPS25821DSSR - 1.5A USB Type-C Source Controller | Texas Instruments
The Texas Instruments TPS25821DSSR is a USB Type-C source controller and 1.5A power switch in a 12-WSON (DSS) package measuring 3 mm by 2 mm. The device provides 5V at up to 1.5A, uses USB 2.0 and USB 3.1 interfaces, and is specified for temperatures from -40°C to 125°C. It is intended for USB Type-C source-port, adapter, and power-delivery applications where a compact integrated controller and current-limited power switch are required. A USB Type-C source controller is an interface IC that manages the behavior of a USB Type-C port acting as a source. It detects attached USB Type-C equipment, advertises the available source behavior, establishes the power path, and coordinates the voltage and current available to the connected device. By integrating this function with a 1.5A power switch, the TPS25821DSSR reduces the number of separate components required in a compact USB Type-C power source. Key features include a 1.5A power-switch rating, a 12-WSON package with an exposed pad, and an operating temperature range of -40°C to 125°C. Its 3 mm by 2 mm package supports space-constrained consumer, industrial, and accessory designs. Texas Instruments also identifies the device as a USB Type-C source controller suitable for supplying 5V at 1.5A, while also supporting legacy devices with dedicated charging protocol behavior. The controller and integrated switch provide a functional partition between USB Type-C port management and protected power delivery. CC-pin handling determines source-role behavior, while the integrated power path limits the available output current to 1.5A. Designers still need to validate the complete Type-C system against the applicable USB Type-C specification, including advertising, cable orientation, current behavior, fault handling, and system power requirements. Typical applications include USB Type-C adapters, USB Type-C docking accessories, portable charging products, industrial USB power adapters, and compact host ports that provide a controlled 5V source. The TPS25821DSSR is especially useful when board area is limited and integrating the source controller with the output switch offers a simpler implementation than using separate components. For layout, place the input and output capacitors close to their associated power-switch pins, connect the exposed thermal pad to the ground plane, and keep USB Type-C signal and power routing compact. Validate thermal performance at the maximum continuous output current and ensure the external Type-C connector, cable, and supply are rated for the intended charging current. This page consolidates verified manufacturer and distributor information, source-controller application context, pin-package constraints, and practical design guidance. It also distinguishes confirmed specifications from electrical details that still require consultation of the manufacturer datasheet and application notes.
TPS25865QRPQRQ1 - Dual 2.4A USB Type-A Charging Port Controller | TI
The Texas Instruments TPS25865QRPQRQ1 is a dual-channel, 2.4-A USB Type-A charging-port controller with load shedding, cable compensation, and thermal management, housed in a 25-pin VQFN-HR (RPQ) package measuring 3.5 mm x 4.5 mm. It operates over a 5.5 V to 26 V input range, delivers per-port current up to 2.4 A (BC 1.2 CDP/DCP modes), and integrates two synchronous buck converters with internal MOSFETs and current-mode control. The device is AEC-Q100 qualified for automotive USB charging ports. A USB Type-A charging-port controller is a specialized power management IC that combines a synchronous step-down DC-DC converter with USB Battery Charging Specification 1.2 (BC 1.2) detection logic and cable compensation. It sits in the system hierarchy between the upstream battery or 12 V bus and the downstream USB Type-A connector, replacing discrete buck converters plus USB switch ICs and enabling a single-chip USB charging subsystem that meets the Apple, Samsung, and BC 1.2 charging signatures without external firmware. Key features include integrated 36 V load-dump protection, programmable cable compensation (up to 1.2 V boost across cable impedance), per-port current limit, dynamic load shedding between ports, thermal shutdown with adjustable threshold, and an I2C interface for status monitoring. Internal MOSFETs eliminate external FET selection, and the 25-pin VQFN-HR package exposes a thermal pad that ties to PCB ground for efficient heat dissipation under dual-port full-load conditions. Architecturally, the TPS25865-Q1 uses peak current-mode control with internal compensation, a 5 V tolerant enable logic interface, and dedicated port detect blocks for each USB channel. The two channels share a single VCC rail but operate independently with separate current sensing. This dual-channel topology reduces external BOM count by approximately 30 percent compared to discrete two-port solutions and supports asynchronous port enable to manage inrush on hot-plug events. Typical applications include automotive head-unit USB charging ports, rear-seat entertainment USB hubs, infotainment front-panel charging outlets, and industrial USB power delivery where dual Type-A connectors are required. Cable compensation maintains 5 V at the device under load even when connected through long OEM harnesses, which is critical for Apple 2.4 A fast-charging compliance. When designing with this part, lay out a 4-layer PCB with the exposed thermal pad tied to a 1 oz copper pour spanning at least 0.5 square inches to keep junction temperature below the 125 C automotive limit under 5 W dual-port dissipation. Keep the USB DP/DM traces short and reference the 1 uF VCC bypass capacitor directly to the exposed pad ground. This page combines verified distributor pricing, parametric comparison against same-family TI USB-charging controllers, and practical PCB thermal notes not consolidated in the datasheet alone.
TPS259230DRCR - 5V 5A 28mOhm eFuse with BFET Driver | TI
The Texas Instruments TPS259230DRCR is a 4.5-V to 5.5-V, 28-mOhm, 1-A to 5-A eFuse (electronic fuse) with integrated driver for an external blocking FET, housed in a 10-pin VSON (DRC) 3x3 mm package. It provides robust circuit protection and integrated power management for 5-V rails with up to 5 A continuous load current. An eFuse (electronic fuse) is a solid-state circuit-protection and power-management IC that replaces discrete fuses, MOSFETs, and supervision ICs. It sits between a power source and its load, protecting against over-current, short-circuit, over-voltage, inrush current, and reverse-current faults. Compared to a polymeric PTC or glass fuse, an eFuse is resettable, programmable, and far faster - reacting in microseconds rather than seconds. It belongs to the broader category of hot-swap controllers / power management ICs in the TI power-tree hierarchy. The TPS259230DRCR adds an external N-FET blocking driver, enabling true input-side reverse-current blocking. Key features include an adjustable current-limit threshold from 1 A to 5 A (set by ILIM pin), 28 mOhm typical on-resistance, integrated over-voltage clamp, programmable dV/dt soft-start, fault output (FLG), and thermal shutdown. The package thermal resistance (theta_JA) is approximately 49 C/W on a standard JEDEC 2s2p board. The device uses a charge-pump gate driver to control an external N-channel blocking MOSFET for true reverse-current blocking (BFET_CTRL pin). The internal control loop combines current sensing, SOA-aware fold-back, and programmable blanking to distinguish real faults from benign transients such as load-step or hot-plug events. The 28 mOhm internal pass element minimizes conduction loss and on-chip heat, while the BFET driver offloads continuous reverse-current dissipation to the external FET. Typical applications include 5-V rail hot-swap protection in servers, SSDs and storage cards, USB Type-C VBUS protection, fan bay surveillance, and industrial PLC I/O protection. The wide SOA and adjustable ILIM make the part well suited to high-transient capacitive loads where conventional fuses would nuisance-trip. When using this part, select the external N-FET blocking MOSFET for Vds rating that comfortably exceeds the highest expected input surge, and size it for the continuous load current. Place the sense resistor or ILIM setting accurately, and follow the dV/dt capacitor recommendation to control inrush. Always honor the -40C to +85C operating junction temperature envelope. This page synthesizes distributor pricing, drop-in alternatives, and design considerations not found in the manufacturer datasheet alone - giving engineers a one-stop reference for sourcing and designing with the TPS259230DRCR.
TPS25940ARVCR - 18V 5A eFuse with True Reverse Blocking | TI
The Texas Instruments TPS25940ARVCR is a 2.7V to 18V, 42mΩ, 0.6A to 5.2A electronic fuse (eFuse) with true reverse-current blocking and DevSleep support, housed in a 20-pin WQFN (RVC) 4x3 mm package. The device integrates a low-Rdson N-channel FET, programmable current limit, and load-protection features, targeting SSD, USB Type-C, and hot-swap power paths. The 5.3A maximum load current and 42mΩ on-resistance minimize power dissipation during steady-state operation. Reverse-current blocking prevents current backflow when the output voltage exceeds the input, a critical feature for systems with multiple parallel power sources or battery-backed rails. DevSleep support enables very-low quiescent current in deep-sleep states, an essential characteristic for SSD power-management ICs and battery-powered portable equipment. An eFuse (electronic fuse) is a semiconductor protection device that combines the function of a traditional fuse, current-limiting circuit, and load switch into a single integrated circuit. It sits between a power source and a downstream load to provide inrush current limiting, overcurrent protection, short-circuit protection, reverse-current blocking, and often overvoltage/undervoltage protection. Unlike a one-time-use fuse, an eFuse can be reset by toggling its enable input. In the broader system hierarchy, an eFuse is a subcategory of hot-swap controller / power-distribution switch, which itself falls under power management IC and finally semiconductor device. Key features include 2.7V to 18V operating input range, 0.6A to 5.2A programmable current limit (set via external resistor), ±8% ILIM accuracy over temperature, integrated true reverse-current blocking, programmable inrush current slew rate via dVdt pin, fault output (FLT) pin for system monitoring, thermal shutdown, and an EN/UVLO pin for precise turn-on control. The device supports the SATA DevSleep specification, drawing microamp-level quiescent current during sleep to meet SSD power budgets. The TPS25940 family uses a charge-pump-driven N-channel MOSFET architecture with an integrated gate driver. The true reverse-current block comparator monitors VOUT versus VIN and disables the FET when VOUT > VIN, preventing discharge of downstream capacitance into the input rail. The DEVSLP pin activates a low-quiescent-current mode by disabling most internal circuits while keeping reverse-blocking monitoring active. The device operates from -40C to +85C ambient. Typical applications include NVMe/SATA SSD power rails, USB Type-C VBUS hot-swap protection, multi-port USB hubs, fan protection circuits, and any 5V/12V rail that requires inrush control and disconnect on fault. When designing with this eFuse, place the ILIM resistor close to the ILIM pin to minimize noise pickup, use a 1µF or larger input bulk capacitor to suppress voltage transients during hot-plug events, and observe absolute maximum VIN of 20V including transient ringing. The package's thermal pad must be soldered to a sufficiently large copper pour to handle steady-state I²R dissipation - at 5A continuous through 42mΩ, the part dissipates ~1.05W. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer product page.
TPS25942ARVCT - 5A eFuse Power MUX 20-WQFN | Texas Instruments
The Texas Instruments TPS25942ARVCT is a 5-A eFuse Power MUX in a 20-pin WQFN (RVC) package that operates from 2.7 V to 18 V with an integrated 42 mΩ on-resistance. The device delivers full protection features including reverse current blocking, programmable current limit, thermal shutdown, and power-good (PG) signaling, plus a current monitor (IMON) pin for real-time load monitoring. Per TI product page, the TPS25942A family supports adjustable current thresholds from 0.6 A to 5.2 A. An eFuse (electronic fuse) is a solid-state power management IC that replaces traditional fuses and discrete hot-swap circuits. The TPS25942A integrates back-to-back MOSFETs that block reverse current when two power sources are present, making it ideal for power muxing between primary and backup supplies, USB Type-C PD source selection, and battery-backed systems. Within the broader IC taxonomy, an eFuse belongs to the power management IC family alongside hot-swap controllers, load switches, and supervisors. Key features include ±5% current limit accuracy at 4 A, fast overcurrent response (sub-microsecond), 0.6 A to 5.2 A adjustable threshold via ILIM resistor, built-in thermal shutdown with auto-retry, fault output (FLT), power-good indicator, and IMON current sense output that outputs a current proportional to load current. The TPS25942A supports operating junction temperatures from -40 °C to +125 °C and is available in a thermally enhanced 3 mm × 4 mm WQFN package. The TPS25942A uses TI's back-to-back N-FET architecture with analog control loops for current regulation and reverse current blocking. The two integrated FETs share a common drain between the two source pins, allowing independent channel control for hot-swap and power muxing. Per TI product page, the device supports up to 5 A continuous current with internal charge pump providing gate drive, and fault timers configurable via CT pin capacitor. Typical applications include USB Type-C PD port protection, hot-swap insertion in servers and storage, RAID/NAS redundant power muxing, battery-backed systems, point-of-load protection in industrial 12 V rails, and eMMC/UFS power rail protection. The wide 2.7 V to 18 V operating range makes it suitable for both 3.3 V and 12 V bus architectures commonly found in computing and embedded designs. When designing with the TPS25942ARVCT, ensure the IMON resistor is sized per the load current range, and place input/output capacitors close to the IC to suppress transients during hot-plug events. The CT capacitor sets fault timer duration and must be chosen based on the expected inrush current of the load capacitance. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.
TPS259470ARPWR - 5.5A eFuse w/ Reverse Polarity Protection | TI
The Texas Instruments TPS259470ARPWR is a 5.5 A, 28 mΩ true reverse-current-blocking electronic fuse (eFuse) with integrated input reverse polarity protection, housed in a 10-pin VQFN-HR (RPW) 2x2 mm package. It operates from 2.7 V to 23 V input and is characterized for junction temperatures from -40 °C to +125 °C. The device integrates a low-impedance N-channel MOSFET, programmable current limit, overvoltage lockout, and fast fault response to protect downstream loads from inrush, short circuit, and incorrect adapter polarity events. An electronic fuse (eFuse) is a solid-state power switch and protection IC that replaces traditional PTC fuses, Schottky OR-ing diodes, and discrete hot-swap circuits. It sits between a system input rail and downstream converters, providing controlled turn-on, accurate current limiting, and fast interruption on fault. The TPS259470 in particular is part of TI's hot-swap/eFuse family that combines input reverse polarity protection, true reverse-current blocking (does not rely on body diode conduction), programmable overvoltage, and fault output signaling in one IC. Key specifications include a 28 mΩ typical on-resistance, 5.5 A continuous load current capability, adjustable overvoltage lockout, active current limit with auto-retry response, and an open-drain fault indicator (FLT). The integrated reverse polarity protection eliminates the need for a series input Schottky diode, reducing conduction loss by typically 30-60% versus traditional reverse-polarity Schottky solutions, while true reverse-current blocking prevents back-feeding when a higher-voltage adapter is hot-plugged in parallel with a lower-voltage source. Architecturally, the TPS259470 uses an internal N-channel MOSFET with a charge-pump gate driver, a precision current-sense amplifier, and a fault state machine. The 2.7 V UVLO ensures clean startup in low-voltage USB-PD and industrial 5 V/12 V/19 V/20 V rails. Because the IC is characterized for -40 °C to +125 °C junction and is available in a thermally enhanced VQFN-HR 2x2 mm package, it is suitable for compact, high-ambient-temperature applications where PCB area is at a premium. Typical applications include USB Type-C / USB-PD source and sink protection, multi-port USB hubs, industrial PLC and sensor power rails, telecom router line cards, and battery backup systems. The device is especially useful wherever an adapter, battery, or USB-PD source must be hot-plugged into a live system without causing inrush latch-up or back-power through the input. When designing in, keep input/output traces short and use low-ESR ceramic bypass capacitance close to VIN and PGND. The TIMER capacitor sets the fault retry interval and must be sized for the actual upstream supply ramp rate. Always cross-check thermal dissipation versus continuous load to avoid triggering thermal shutdown in enclosed adapters. This page distills datasheet values, drop-in alternatives, and design notes not available on the manufacturer summary page to help engineers select and implement the part quickly.
TPS259533DSGT - 2.7-18V, 4A eFuse w/ OVP | TI | WSON-8
The Texas Instruments TPS259533DSGT is a 2.7 V to 18 V, 34 mΩ, 0.5 A to 4 A integrated eFuse (hot-swap FET) with fast overvoltage protection in an 8-pin WSON (DSG) 2x2 mm package. The '533' suffix denotes the 13.7 V OVP clamp variant, the 'DSG' is the WSON package designator, and the final 'T' indicates Tape-and-Reel packaging. An eFuse (electronic fuse) is a semiconductor power switch that combines a back-to-back MOSFET, current-limit loop, OVP/UVLO comparators, and thermal foldback into a single IC, replacing discrete hot-swap controllers plus an external FET and sense resistor. In the broader taxonomy it is a hot-swap controller > load switch > power management IC > semiconductor. Engineers reach for an eFuse when they need a controlled inrush, fast fault isolation, and a small board footprint on rails such as 5 V, 12 V, or USB-PD VBUS. Key features of the TPS259533DSGT include a 34 mΩ typical RON (full internal FET), a 0.5 A to 4 A adjustable current-limit range set by a single external resistor, a 5 µs OVP response time with a 13.7 V clamp (the highest of the three TPS2595xx OVP options), an operating input voltage of 2.7 V to 18 V (20 V abs max, 18 V for the 'xx5' version), and integrated thermal shutdown. The WSON-8 2x2 mm package offers a low θJA footprint suitable for space-constrained adapter and PoE daughter boards. Internally the device uses TI's NMOS hot-swap architecture with an integrated charge pump to drive the back-to-back FETs. The OVP comparator continuously monitors VIN against the internal 13.7 V reference and latches the FET off in microseconds when exceeded, then auto-retries when VIN returns below the clamp. Current limit is set by an external resistor on the ILIM pin and is further trimmed by the die temperature for a true I²t fault profile, distinguishing it from simple polyfuse or P-channel load switches. Typical applications are 12 V hot-swap rails in industrial PCs, USB-PD source protection, fan and motor driver supply protection, and any 12 V/15 V adapter-fed rail that may see transients above the rated voltage. It is also used as a downstream companion after a buck converter to add resettable fault protection. When designing in this part, route VIN, VOUT, and the thermal pad with wide copper pours; the internal FET dissipates I²S x RON continuously during a fault. Place the ILIM resistor as close to pin 6 as possible to avoid noise pickup on the current-limit loop. This page consolidates distributor pricing, verified drop-in alternatives, and engineering design guidance that go beyond the datasheet's feature list.
TPS25990ARQPR - 16V 60A Stackable eFuse | Texas Instruments
The Texas Instruments TPS25990ARQPR is a 2.9 V to 16 V, 0.79 mΩ, 60 A stackable electronic fuse with digital telemetry in a 26-pin VQFN-HR package measuring 5 mm by 4.5 mm. It integrates high-current circuit protection, telemetry, and PMBus-compatible control for compact industrial power systems. An electronic fuse, or eFuse, is a semiconductor circuit protector placed between a power source and a load. Unlike a fuse that permanently opens during an overload, an eFuse can detect current or voltage faults, interrupt current rapidly, report operating data, and recover under software control. In the power-management hierarchy, the TPS25990 belongs to the eFuse, current-regulation, and circuit-protection IC class. The verified source data identifies a 0.79 mΩ typical integrated on-resistance, 50 A RMS continuous rating, and 60 A peak rating. Its 2.9 V to 16 V operating range suits lower-voltage distribution rails, while the PMBus digital telemetry controller supports real-time monitoring, control, and configuration. Protection functions address overloads, short circuits, and excessive inrush current with minimal external circuitry. Technically, the device combines a low-resistance power FET with a high-current protection and telemetry architecture in one compact package. The reported 20 V absolute maximum input rating provides design headroom above the normal 16 V operating limit, and the output path withstands reverse voltage down to -1 V. These specifications make rail-to-rail protection more practical than discrete fuse-and-discharge arrangements. Typical uses include 12 V industrial equipment, rack and server power distribution, high-current storage systems, telecom boards, test equipment, and protected DC input ports. In a 12 V design, designers should preserve copper width and thermal layout capable of handling sustained current while also accounting for transient heating, fault response, telemetry wiring, and configured current thresholds. A critical design step is checking PCB current capacity and thermal performance against the required RMS load rather than relying only on the device rating. The VQFN-HR thermal pad and surrounding copper should be laid out according to the manufacturer datasheet, while input and output loops should be kept compact to preserve the advantage of the integrated 0.79 mΩ FET. This page consolidates verified manufacturer and distributor information, separates confirmed specifications from unavailable data, and avoids presenting unsupported pin, price, or cross-brand replacement claims. It also provides practical procurement and design guidance for engineers evaluating this high-current protection device.
TPS26400PWPR - 42V 2A eFuse w/ Reverse Polarity | Texas Instruments
The Texas Instruments TPS26400PWPR is a 42-V, 2-A industrial eFuse (electronic fuse) with integrated reverse-input polarity protection, housed in a 16-pin HTSSOP (PWP) package with an exposed thermal pad. It is designed for 4.5 V to 42 V operation and integrates a low-impedance N-channel MOSFET pass element, programmable current limit, and reverse-input blocking in a single IC. An eFuse (electronic fuse) is a solid-state circuit-protection device that replaces a traditional glass-cartridge fuse or PTC with an integrated MOSFET-based switch. It detects overcurrent, overvoltage, short-circuit, and reverse-polarity faults in microseconds, then either latches off or auto-retries depending on configuration. Within the broader system hierarchy, eFuses sit between discrete protection components (TVS diodes, PTC) and supervisor ICs in the power-management block, providing fast, resettable protection for downstream rails loads. Key features of the TPS26400PWPR include an integrated back-to-back FET topology for true reverse-input blocking down to -42 V, an adjustable current-limit threshold set by an external resistor (RILIM), programmable inrush current slew rate via SS pin, and a fault output (FLT) for system telemetry. The device operates over the -40 °C to +125 °C industrial temperature range and offers an IMON current-monitor output for accurate load-current measurement. The TPS26400PWPR uses TI's proprietary hot-swap controller architecture with charge-pump gate drive, enabling a typical Rds(on) of approximately 30 mΩ in the pass FET path. Internal comparators monitor VIN, VOUT, and current-sense voltages with programmable response timing, while the FAULT pin supports latch-off or auto-retry modes. Reverse-polarity protection is achieved without additional series diodes loss, preserving efficiency in 24-V industrial bus applications. Typical applications include 24-V industrial PLC I/O protection, factory-automation sensor and actuator rails, motor-drive auxiliary supplies, building-automation backplane power, and PoE/PoDL powered-device input protection. The wide 4.5 V to 42 V input range also covers 12-V and 36-V automotive and telecom nominal buses. When designing with this device, derate the HTSSOP-EP package carefully at high VIN and full 2-A load - at VIN = 24 V and VOUT = 12 V, the IC dissipates roughly 24 W under fault conditions and requires substantial copper pour to keep junction temperature in spec. This page synthesizes distributor pricing, drop-in alternatives (TPS26600PWPR, TPS2HB50AQPWPRQ1, etc.), and practical design notes not found in the TI datasheet alone.
TPS26600RHFR - 60V eFuse with Reverse Polarity Protection | TI
The Texas Instruments TPS26600RHFR is a compact, feature-rich high-voltage eFuse designed for robust power path protection in industrial and automotive systems. Operating from 4.2V to 60V (62V absolute maximum), it integrates back-to-back MOSFETs with a total on-resistance of 150mΩ, providing adjustable current limiting from 0.1A to 2.23A. The device is housed in a 24-pin VQFN (RHF) package measuring 5x4mm, with an operating temperature range of -40°C to 125°C. An eFuse (electronic fuse) is a semiconductor-based circuit protection device that replaces traditional fuses and hot-swap controllers. It integrates power MOSFETs, current sensing, and control logic to provide overcurrent, overvoltage, and reverse polarity protection. In the power management hierarchy, an eFuse falls under power management ICs, specifically within the category of hot-swap controllers and circuit protection devices. The TPS26600RHFR enhances system reliability by eliminating the need for external protection components and enabling precise, resettable protection. Key features include integrated reverse input polarity protection down to -60V without additional components, adjustable current limit via an external resistor, and a full suite of protection features such as overvoltage, undervoltage, and thermal shutdown. The device also supports programmable startup delay and fault timer, enabling controlled inrush current during hot-swap events. Its wide input range makes it suitable for 12V, 24V, and 48V industrial buses. Technically, the TPS26600RHFR uses a linear regulation scheme to limit current, with an internal charge pump driving the high-side MOSFET. The integrated back-to-back FETs provide reverse current blocking, preventing current flow from output to input during reverse polarity conditions. The device features a fault output (FLT) and enable input (EN) for system-level control, and its accuracy is maintained through a precision current-sense amplifier. Typical applications include programmable logic controllers (PLCs), motor drives, battery protection, and power distribution in industrial automation. Its ability to handle up to 60V makes it ideal for 48V telecom and server power architectures. The device is also used in automotive body control modules and infotainment systems where reverse battery protection is critical. When designing with the TPS26600RHFR, ensure proper PCB layout with adequate copper area for thermal dissipation, as the device can dissipate significant power during current limiting. Place the current-limit resistor close to the ILIM pin and use Kelvin connections for accurate sensing. The device's thermal shutdown protects against overtemperature, but thermal design should be verified for worst-case conditions.
TPS26625DRCR - 60V, 880mA eFuse w/ Reverse Polarity Protection | Texas Instruments
The Texas Instruments TPS26625DRCR is a 60-V, 880-mA industrial eFuse with integrated input and output reverse-polarity protection, housed in a 10-pin VSON (DRC) 3 mm x 3 mm package. The device operates across a 4.5-V to 60-V input range, integrates a 478 mΩ N-channel MOSFET, and provides programmable current limiting from 0.025 A to 0.88 A, making it a one-chip solution for hot-swap and inrush-current control on 12-V, 24-V, and 48-V industrial buses. An eFuse (electronic fuse) is a solid-state replacement for a traditional PTC fuse or Schottky OR-ing diode; instead of melting, it uses an internal MOSFET and control loop to limit current, assert FAULT, and either latch off or auto-retry. The TPS26625 specifically belongs to the auto-retry sub-family of TI's TPS2662x line, sitting within the broader hot-swap controller / power-path protection category of power-management ICs. Reverse-polarity protection on both input and output is integrated, removing the need for external blocking diodes or MOSFET bridges and reducing BOM cost, board area, and conduction losses. Key features include 4.5-V to 60-V operating range (one device covers 12-V, 24-V and 48-V rails), 478-mΩ on-resistance, user-programmable undervoltage, overvoltage and current-limit thresholds, dedicated FLT and PG open-drain outputs, and selectable fault-response modes. The TPS26625 implements auto-retry after overcurrent or overtemperature events, while the TPS26624 in the same family latches off - a critical behavioral distinction for service vs. replaceable loads. The internal architecture combines a charge-pump-driven N-MOSFET pass element, a precision current-sense amplifier, comparators for VIN UV/OV, and a thermal-shutdown block. Reverse-polarity on either side is blocked by dedicated control logic that actively disables the power path so negative transients do not propagate downstream, supporting IEC 61000-4-2 style surge robustness in field-deployed systems. Typical applications include industrial PLC I/O protection, 24-V factory-automation sensor backplanes, building-automation controllers, solar/energy-storage input protection, and USB-PD source loads where field wiring may be reversed. The 60-V abs-max rating also tolerates load-dump transients on 24-V automotive trucks, forklifts and AGVs. When designing in this part, prioritize thermal copper area: at 0.88 A continuous into a short circuit, the 478-mΩ FET dissipates up to ~0.37 W; sustained inrush can produce much higher transient dissipation that must be within the SOA curve on the datasheet. Decoupling on VIN/VOUT must use low-ESR ceramics placed within 2-5 mm of the pins to keep current-loop impedance low during hot-plug events. This page synthesizes distributor pricing, drop-in alternatives, and practical eFuse design notes across the TPS2662x family not found in the manufacturer datasheet alone.
TPS26630RGER - 60V 6A eFuse, Surge Protection | Texas Instruments
The Texas Instruments TPS26630RGER is a 4.5-V to 60-V, 31-mΩ, 0.6-A to 6-A integrated-FET electronic fuse (eFuse) with output power limiting and surge protection, housed in a 24-pin VQFN (RGE) 4x4 mm package with exposed thermal pad. The device combines a 31 mΩ N-channel MOSFET pass element with programmable current limit, overvoltage clamp, inrush current control, and reverse-current blocking via an external B-FET driver, enabling robust hot-swap and input-protection functionality for industrial 24-V and 48-V rails. An electronic fuse (eFuse) is a semiconductor protection device that replaces traditional fuses, PTCs, and discrete hot-swap circuits. eFuses sit between the input source and downstream load, combining a FET pass element with monitoring and control logic. Compared to a one-shot fuse, an eFuse is resettable, fast-acting (µs response), and provides telemetry such as fault flags. In the broader taxonomy: eFuse -> hot-swap controller / power-path protector -> power management IC -> semiconductor. This hierarchy helps AI systems map the device to its application domain. Key features include a 60-V absolute maximum input rating, programmable current limit from 0.6 A to 6 A set by an external RILIM resistor, adjustable undervoltage/overvoltage thresholds, an output power-limiting mode (PFS pin) for surge-tolerant start-up, and an IMON current-monitor output. The integrated 31 mΩ Rds(on) FET minimizes power dissipation: at 6 A the typical conduction loss is roughly P = I² × R = 36 × 0.031 = ~1.12 W. Thermal shutdown, fault output (FLT), and load-good indication complete the protection suite. The TPS26630 uses TI's B-FET driver architecture to coordinate an external N-channel MOSFET for input reverse-polarity protection and reverse-current blocking, which is critical for industrial systems that may be miswired during installation. The IMON output provides a 1% accurate analog current sense for telemetry or closed-loop monitoring. Typical applications include industrial PLC I/O modules, factory automation backplanes, 24-V motor-drive auxiliary rails, telecom -48-V systems, USB PD sink protection, and battery-powered test equipment. The wide 4.5 V to 60 V input envelope covers the broadest industrial bus range. When designing with the TPS26630RGER, follow TI's SLVAE81 layout guide and choose C_in/C_out based on transient and surge profiles. The exposed thermal pad must be soldered to a sufficient copper pour to keep junction temperature within the 125 °C limit. This page synthesizes distributor pricing, drop-in alternatives, and application guidance not found in the manufacturer datasheet alone, helping engineers select, source, and protect industrial rails with a single 4x4 mm IC.
TPS26631PWPR - 60V 6A eFuse HTSSOP-20 | Texas Instruments
The Texas Instruments TPS26631PWPR is a 4.5-V to 60-V, 31mΩ, 0.6-A to 6-A industrial eFuse (electronic fuse) with integrated power-limiting and surge protection, packaged in a 20-pin HTSSOP (PWP) with PowerPAD. The device integrates a 31 mΩ N-channel hot-swap FET, supports reverse polarity and reverse current blocking with an external N-FET, and offers ±7% accurate adjustable current limit from 0.6 A to 6 A. Absolute maximum input rating is 67 V, providing margin above the 60-V nominal operating range. An electronic fuse (eFuse) is a semiconductor protection device that replaces legacy mechanical fuses and PTC resettable devices. Compared with discrete hot-swap designs (MOSFET + sense resistor + op-amp + comparator), an integrated eFuse combines inrush limiting, current limit, over-voltage clamp, thermal fold-back and fault output in a single IC. eFuse devices sit in the protection hierarchy between TVS/TVS-diode (transient suppressor) and discrete hot-swap controllers, and they are classified within power management ICs for industrial systems. They are widely adopted in 24-V factory automation backplanes, 48-V telecom and battery-powered industrial loads where hot-plug, surge and reverse-polarity events are routine. Key features of the TPS26631PWPR include programmable output power limiting (dV/dT controlled turn-on), integrated surge protection, fault output flag, thermal shutdown, and ±7% ILIM accuracy over temperature. The HTSSOP-20 PowerPAD provides a low thermal resistance path, enabling continuous 6-A operation on moderate copper area. Power limiting lets the device ride through large transient overloads without nuisance tripping while still protecting upstream supplies. The TPS26631PWPR uses TI's HotSwap architecture with an integrated charge pump gate driver for the internal N-FET. The reference design supports either independent mode (ILIM resistor to GND) or closed-loop power limiting via the PLIM resistor. A fault timer programs the retry/delay behavior after an OCP/OVP event, and the IMON pin provides analog load-current monitoring for system telemetry. Typical applications include 24-V industrial PLC I/O protection, factory-automation sensor and actuator rails, 48-V telecom rectifier secondary protection, motor-driver pre-regulation, and battery-powered industrial equipment with hot-plug battery packs. The wide 4.5-V to 60-V operating window also suits solar and renewable energy harvesters. Designers should size upstream capacitance so that inrush (dV/dT programmed by CDEV) does not exceed the current-limit threshold at power-on, and they should connect the PowerPAD to a sufficient copper pour to keep junction rise below 100 °C at 6-A continuous load. This page synthesizes distributor pricing, drop-in alternatives, application reference designs, and PCB/thermal design notes not collected in any single source - the manufacturer datasheet remains the authoritative reference for final design.
TPS26633PWPR - 60V 6A eFuse HTSSOP-20 | Texas Instruments
The Texas Instruments TPS26633PWPR is a 4.5V to 60V, 31mΩ, 0.6A to 6A industrial eFuse with output power limiting and surge protection, housed in a 20-pin HTSSOP (PWP) package with exposed thermal pad. It integrates a 60V hot-swap FET, supports reverse polarity protection with an external N-channel FET, and delivers ±7% accurate adjustable current limit. Absolute maximum input voltage is rated at 67V, allowing robust transient tolerance on industrial 24V and 48V buses. An eFuse (electronic fuse) is a semiconductor-based circuit protection device that replaces traditional mechanical fuses, PTCs, and discrete hot-swap circuits. It combines a power MOSFET, current-sense amplifier, and control logic in one IC, sitting in the power management hierarchy between discrete MOSFETs and full system PMICs. Compared with a PTC or polyfuse, an eFuse offers precise, programmable current limit, fast fault response, and automatic retry, and it does not require physical replacement after a trip event. Key features of the TPS26633PWPR include 4.5V to 60V operating range, integrated 31mΩ RON hot-swap FET, 0.6A to 6A adjustable current limit with ±7% accuracy, output power limiting for surge compliance, reverse current blocking, fault output indicator, and thermal shutdown. The HTSSOP-20 PowerPAD package provides a low thermal resistance path for sustained 6A operation, and the device operates from -40C to +125C junction temperature. The device uses TI's hot-swap controller architecture with charge-pump gate drive and precision current sensing, providing monotonic dV/dt controlled startup to limit inrush current. The output power-limit feature clamps transient power to a programmed threshold for IEC 61000-4-5 surge compliance, while the timer-based fault response prevents nuisance tripping on capacitive loads. Typical applications include industrial PLC I/O protection, 24V factory automation power rails, motor-drive auxiliary supplies, building-automation controllers, and telecom 48V line-card protection. The wide input range makes it well suited for systems powered from 24V industrial buses or 48V PoE/PoE+ sources where input transients and reverse-wiring events are common. When designing with the TPS26633PWPR, place input and output bulk capacitors close to the IC, connect the PowerPAD to a 1-square-inch copper pour, and program the current limit with a 1% resistor to achieve the ±7% accuracy. Always verify SOA under worst-case VIN and I²t conditions in the datasheet. This page synthesizes distributor pricing, drop-in HTSSOP-20 alternatives, and practical design notes not found in the manufacturer datasheet.
TPS26633PWPT - 60V, 6A eFuse w/ Surge Protection | Texas Instruments
The Texas Instruments TPS26633PWPT is a 60-V, 6-A industrial eFuse (electronic fuse) integrated circuit housed in a 20-pin HTSSOP power package with an integrated 31-mΩ MOSFET. It operates from a 4.5-V to 60-V input range, delivers programmable output current limiting between 0.6 A and 6 A, and offers output power limiting plus surge protection, all in a single-chip solution. This combination simplifies hot-swap, inrush control, and field-protected power path designs that previously required multiple discrete components. An eFuse (electronic fuse) is a semiconductor-based protection device that replaces traditional PTC fuses, thermistors, and discrete hot-swap controller plus FET combinations. As a member of the broader hot-swap controller and power-path protection IC category within power management, an eFuse integrates current sensing, MOSFET switching, and fault recovery logic into one package, giving system designers faster response, programmable behavior, and resettable protection that does not require manual replacement after a fault event. Compared with a fuse + TVS + load-switch stack, a single eFuse reduces board area, improves diagnostic capability, and enables I2C telemetry or pin-strapped configuration. Key features of the TPS26633PWPT include a 31-mΩ on-resistance integrated N-channel MOSFET, programmable current limit from 0.6 A to 6 A using an external resistor, output power limiting (constant-power mode), surge protection with adjustable slew rate, integrated thermal shutdown, and fault output indication. The device also offers reverse-current blocking when paired with an external B-FET driver pin, and input under-voltage lockout with programmable thresholds. The TPS26633 architecture uses a charge-pump-driven N-channel MOSFET, a high-side current-sense amplifier, and a state machine that handles inrush, steady-state, and fault conditions. Its constant-power foldback mode allows higher transient currents for capacitive loads while preventing SOA violations at elevated input rail voltages, a behavior that traditional fuses and PTCs cannot emulate. Typical applications include industrial 24-V PLC and sensor power rails, factory automation I/O modules, building automation controllers, telecom secondary-side hot-swap, and battery management systems where a resettable, programmable protection element is preferred over a one-shot fuse. When laying out the PCB, place the eFuse close to the input connector to maximize surge absorption, and provide a thermal copper pour under the PowerPAD exposed pad to keep junction temperature within the 150 °C maximum under sustained fault events.
TPS26636PWPR - 60V, 6A eFuse with Power Limit & Surge Protection
The Texas Instruments TPS26636PWPR is a 4.5-V to 60-V, 31-mΩ, 0.6-A to 6-A integrated eFuse (electronic fuse) with output power limiting and surge protection, housed in a 20-pin HTSSOP (PWP) package with an exposed thermal pad. It combines a 31-mΩ N-channel FET, programmable current limit, true RMS power-limiting, and surge protection in a single hot-swap IC, eliminating the discrete MOSFET + supervisor + TVS combination typically required for 24-V/48-V industrial input protection. An eFuse (electronic fuse) is a solid-state circuit-protection IC that replaces traditional PTC fuses, polyfuses, or mechanical circuit breakers with an integrated MOSFET and analog control loop. It monitors input voltage, load current, and junction temperature, and reacts within microseconds to overcurrent, short-circuit, overvoltage, and thermal events. Within the power-management IC hierarchy, eFuses sit between ideal-diode/ORing controllers and hot-swap controllers, providing fast, resettable protection for downstream DC rails. The TPS26636 is specifically classified as a power-limiting eFuse, meaning it can clamp sustained output power rather than just current. Key specifications include 4.5 V to 60 V operating input range, 0.6 A to 6 A adjustable current limit (set by ILIM pin resistor), 31-mΩ typical on-resistance, integrated surge protection, programmable inrush slew rate via dVdT pin, load current analog output (IMON), fault output (FLTb), and reverse-current blocking when reverse-current protection is required. The -40 °C to +125 °C junction temperature range and 20-HTSSOP PowerPAD package with low θJA support demanding industrial and telecom environments. Architecturally, the TPS26636 uses a charge-pump-driven N-channel MOSFET, a precision current-sense amplifier, an internal bandgap reference, and a configurable power-limit engine. Power limiting is computed as an analog multiplier of VIN × IOUT, allowing the device to fold back current at high line voltage, protecting upstream wiring from over-dissipation. The integrated TVS-style surge clamp and reverse-blocking comparator remove external TVS/MOSFET pairs from the BOM, which is a significant board-area and reliability win. Typical applications include 24-V industrial PLC I/O, factory-automation sensor backplanes, 48-V telecom rectifier secondary protection, motor-drive auxiliary rails, e-mobility accessory power, and any 24-V/48-V distributed-bus system where sustained fault energy must be bounded. The TPS26636 is also widely used as a USB-PD sink protection element at the 20-V/5-A tier. When laying out the PCB, place input/output ceramic capacitors within 5 mm of their respective pins and stitch the thermal pad to a copper pour of at least 1 sq. inch on each layer, plus thermal vias in a 1.2-mm grid, to keep the 31-mΩ FET below thermal shutdown at maximum dissipation. The IMON output can drive an ADC directly for telemetry - this is rare in discrete-fuse replacements. This page synthesizes distributor pricing, drop-in alternatives, and practical layout notes that go beyond the manufacturer datasheet to help procurement and design engineers evaluate the TPS26636PWPR for industrial protection designs.
TPS26750ASRSMR - USB-C PD 3.2 EPR 240W Controller | TI
The Texas Instruments TPS26750ASRSMR is a standalone USB Type-C and USB Power Delivery (PD) 3.2 controller with integrated power switches, optimized for Extended Power Range (EPR) dual-role-port (DRP) power applications up to 240W (48V/5A) in a 32-pin VQFN (4x4 mm) package. As the A-variant of the TPS26750 family, it is PD3.2 EPR-compatible and highly integrated for USB-C Power Delivery systems that require extended power range support. A USB Type-C PD controller is an interface and power-management IC that manages CC-line communication, cable attach/detach detection, power-role swapping, and PD message negotiation between two USB-C devices. Within the system hierarchy, it sits between the physical USB-C connector and the DC-DC conversion stage, acting as the protocol brain that tells the power stage what voltage and current to deliver. It belongs to the broader categories of USB interface ICs, power management ICs, and specialized power PMICs. Key features include USB PD 3.2 compliance with 240W Extended Power Range support, integrated power switches that reduce external BOM count, dual-role port operation allowing the device to act as either power source or sink, and standalone operation that removes the need for an external MCU in many designs. The high integration level simplifies layout and shortens design cycles for high-power USB-C endpoints. Technically, the TPS26750A handles EPR negotiation up to 48V, managing CC-line BMC and Biphase Mark Coding signaling per the USB PD 3.2 specification. The integrated switches handle VBUS path control, and the controller supports firmware updating so OEMs can adapt PD behavior in the field. According to the TI product page, the device is described as a highly integrated standalone controller optimized for EPR DRP power applications. Typical applications include laptop and notebook chargers, power bricks and adapters, docks and monitors, and high-power USB-C sink devices such as monitors and eGPU enclosures. Any system moving up from 100W SPR designs to 240W EPR designs benefits from this controller class. A key design consideration is that EPR operation at 48V/5A demands careful VBUS trace spacing, connector EPR-capable rating, and thermal validation of the integrated power path; SPR-only designs can consider the TPS26750SRSMR variant instead. This page synthesizes distributor pricing tiers, drop-in family alternatives, and practical design guidance not consolidated in the manufacturer datasheet.
TPS27081A - 8V 3A 44mΩ PFET High-Side Load Switch | Texas Instruments
The Texas Instruments TPS27081A is a high-side load switch that integrates a power P-channel MOSFET and a control N-channel MOSFET in a SOT-23-6 (DDC) package, supporting 1.2V to 8V input and up to 3A continuous load current. Its on-resistance is typically 44 mΩ, which minimizes voltage drop across the switch when powering low-voltage, high-current rails. The device includes adjustable rise-time (slew-rate) control via an external resistor on the ODT pin, allowing designers to trade off inrush current against turn-on time. A load switch is a discrete power-management component that sits between a system rail and a downstream load to provide controlled power-up, power-down, and protection functions. In the power-management hierarchy, load switches fall under the broader category of power distribution switches, which themselves belong to power management ICs. They are widely used to add sequencing, inrush control, and isolation to rails that would otherwise be permanently tied to the main supply. Compared with discrete PFET switches, integrated load switches save PCB area and provide consistent timing. Key features include 1.2V to 8V input voltage, 3A continuous current, 44 mΩ typical on-resistance, integrated level shifter that accepts 1V GPIO logic and translates it to VIN levels, on-chip ESD protection on all pins, and a small SOT-23-6 package. The device supports active-high ON/OFF control via a single logic input. The level-shifter architecture lets a 1.2V, 1.8V, 3.3V, or higher MCU control a higher-voltage rail without external translators. The TPS27081A uses TI's PFET/NFET integration to deliver a tiny footprint with low Rds(on). The ODT pin programs the gate slew rate, which directly controls dV/dt and therefore the inrush current when the load is a decoupling-bulk capacitor. Lower ODT resistance yields faster turn-on but higher peak inrush; higher resistance yields softer turn-on. Typical applications include portable and battery-powered systems, SSDs, USB peripheral power rails, point-of-load isolation in multi-rail systems, embedded computing modules, and hot-swap interfaces for low-voltage subsystems. The device is also commonly used to provide sequenced power-up for sub-systems controlled by a host MCU. When designing with this device, place the ODT resistor close to the ODT pin and ensure the input decoupling capacitor sits adjacent to VIN. Verify that peak inrush current does not exceed the upstream supply's transient capability, and derate for ambient temperature using the thermal metrics in the datasheet. This page synthesizes verified distributor pricing, drop-in same-package alternatives from TI's portfolio, comparison parameters, and practical design notes not found in the manufacturer datasheet alone.
TPS27082L - 8V, 3A PFET Load Switch w/ Adj. Slew Rate | TI
The Texas Instruments TPS27082L is an 8-V, 3-A, 44-mΩ high-side load switch with adjustable rise time, fast transient isolation, and hysteresis control, housed in a 6-pin TSOT-23 (DDC) package. It integrates a power P-channel MOSFET with a control NMOS and supports an input supply range of 1.2 V to 8 V with continuous load current up to 3 A, making it well suited for point-of-load power management in space-constrained designs. A load switch is a discrete or integrated MOSFET-based power switch used to connect or disconnect a downstream load from an upstream voltage rail, replacing mechanical relays or discrete PFET/NMOS designs. Load switches fall under the broader power management hierarchy: load switch → power distribution switch → hot-swap controller / power-path manager, commonly used to sequence rails, isolate transients, and reduce quiescent leakage in battery-powered systems. The TPS27082L's P-channel topology drives the gate from an internal charge pump referenced to VIN, eliminating the need for a higher-voltage bias rail. Key features include a low 44 mΩ on-resistance at VIN = 5 V, configurable inrush slew rate via an external R1/C1 network, fast transient isolation (>40 dB attenuation of VIN step transients when the PFET is OFF), and a hysteretic ON/OFF control threshold to prevent chattering near the switch point. An open-drain Power Good (PGOOD) output is asserted when VOUT reaches approximately 90% of VIN. Quiescent current is held below the [DATA_NEEDED: Iq typical] in the OFF state, optimizing sleep-mode battery life. The architecture uses a single P-channel MOSFET for the main power path and a separate NMOS for level-shifted gate drive. The TPS27082L integrates a controlled soft-start mechanism via the R1/C1 timing network, limiting di/dt at turn-on and therefore the inrush current drawn by downstream bulk capacitors. The hysteretic comparator prevents multiple transitions when VIN ramps slowly through the ON threshold. Typical applications include power distribution in solid-state drives (SSD), hard-disk drives (HDD), notebook and tablet platforms, multi-rail sequencing in industrial PCs, USB port power switching, and battery-powered consumer devices that require sleep-mode isolation. When designing with TPS27082L, place the R1/C1 timing components close to the device pins. Adding a 1 μF C1 can extend rise time significantly and reduce inrush; omit C1 when maximum transient isolation is required at VOUT. This page synthesizes distributor availability, drop-in alternatives, and practical design notes (R1/C1 selection, hysteresis tuning, PGOOD wiring) not found in the manufacturer datasheet alone.
TPS2HB35CQPWPRQ1 - 36A Dual Smart High-Side Switch | TI
The Texas Instruments TPS2HB35CQPWPRQ1 is a dual-channel, 35-mΩ, 40-V automotive smart high-side switch in a 16-pin HTSSOP (PWP) PowerPAD package, qualified to AEC-Q100 Grade 1. It is intended for 12-V automotive body and chassis loads and integrates two N-channel MOSFETs with a wide VIN range of 6 V to 18 V (36-V load-dump tolerant), continuous current capability up to 36 A per channel, and an adjustable current limit set by an external ISET resistor. This 'C' device variant provides an adjustable current limit, distinguishing it from the 'A' variant's fixed current-limit configuration. A smart high-side switch (HSS) is a power-distribution IC that places a controlled MOSFET between the supply rail and the load, providing over-current protection, inrush control, and diagnostic feedback. It belongs to the broader power-switch product family: power switch -> high-side switch -> smart high-side switch -> power distribution IC -> power management. Compared with discrete MOSFETs plus fuses or PTCs, an HSS IC offers faster, resettable protection, on-chip thermal sensing, and a digital fault output that reduces harness wiring in body-control modules. Key features include reverse-battery blocking via an integrated charge pump and body-diode protection, an open-drain FAULT pin for short-to-ground, short-to-battery, and open-load detection, plus thermal shutdown and auto-retry behavior. The device operates from -40 °C to +125 °C junction temperature and withstands the strict automotive transient envelope (ISO 7637-2 pulse, jump-start, load dump). Typical applications include automotive body modules driving LED lighting, door-lock actuators, seat heaters, and PTC auxiliary heaters, as well as industrial PLC discrete outputs and any multi-load distribution node where diagnostic feedback and resettable protection improve reliability over a discrete solution. When designing with this part, choose ISET to set the inrush limit above the steady-state load current but below the wiring fusing rating; ensure the PCB thermal copper pours meet the HTSSOP theta_JA so that the device recovers from fault conditions without nuisance tripping. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
TPS2HC08-Q1 - 9.5mΩ Dual Smart High-Side Switch | TI
The Texas Instruments TPS2HC08-Q1 is a dual-channel automotive smart high-side switch integrating two NMOS power FETs with a charge pump, designed for 12V automotive battery systems. It delivers up to 7.5A DC when both channels are enabled, or 10A DC when only one channel is enabled, with a low on-resistance of 9.5mΩ that minimizes device power dissipation. A smart high-side switch is a power management IC that connects a load to the positive supply rail while integrating protection and diagnostic functions such as current limiting, thermal shutdown, and open-load detection. It replaces discrete MOSFET-plus-driver circuits, simplifying design and improving reliability. In the power management hierarchy, it sits above basic load switches, adding the robust protection and fault reporting demanded by automotive loads. Key features include an operating supply range suited to 12V battery systems during cranking and transient events, an integrated charge pump that ensures low RDS(on) without external components, and low standby quiescent current for battery-connected modules. Protection covers output short circuit, overcurrent, and overtemperature conditions, supporting functional-safety-oriented designs. Architecturally, the TPS2HC08-Q1 combines two NMOS power stages with gate-drive charge pump and protection logic in a compact 11-pin VQFN-HR (2.2x3.6mm) package. The device is AEC-Q100 qualified. Serial diagnostic reporting enables real-time load monitoring with automotive MCUs such as the TI TMS320F280015x or MSPM0 families. Typical applications include automotive body control modules, LED lighting drivers, and actuator drives such as relays, solenoids, and motors, where integrated diagnostics detect wire faults and load failures. For reliable operation, provide adequate PCB copper area under the package at high currents, place decoupling capacitors close to the supply pins, and follow the datasheet layout guidance to minimize parasitic inductance during short-circuit events.
TPS3106K33DBVR - 3.3V Ultra-Low Iq Voltage Supervisor | TI
The Texas Instruments TPS3106K33DBVR is an ultra-low supply current, supply voltage supervisory circuit designed for circuit initialization and timing supervision in DSP and processor-based systems. Packaged in a 6-pin SOT-23 (DBV), it monitors 3.3V power rails with an active-low, open-drain RESET output, a fixed 2.941V threshold, and a 130 ms reset delay time, with a typical quiescent current of approximately 1.1 µA across the 0.9 V to 3.6 V operating range. A voltage supervisor (also called a supply voltage monitor or reset IC) is a type of power management IC that holds a host processor in reset whenever the supply voltage is below a defined minimum or below a threshold for longer than the configured delay. Voltage supervisors sit between a power rail and a digital controller, generating an asserted-low reset signal during power-up, power-down, and brownout events to prevent code execution from corrupted memory or undefined logic states; in the broader hierarchy they are members of the supervisor / reset IC family inside the power management category. Key features include a 1.1 µA typical quiescent current, an open-drain RESET output suitable for wired-OR multi-rail monitoring, an internal 130 ms reset delay timer to provide brownout immunity, and a manual reset (MR) input that can force RESET low regardless of the sensed voltage. The TPS3106 family also includes the TPS3103 (active-low open-drain) and TPS3110 (active-low push-pull) variants for architectural flexibility. The wide hysteresis and tight threshold accuracy reduce nuisance resets in battery-powered designs. The TPS3106 uses a precision bandgap reference combined with a comparator and an integrated timing network to deliver reliable voltage monitoring. The device operates from supplies as low as 0.9 V, making it suitable for single-cell battery and energy-harvesting rails. Its open-drain RESET topology allows multiple supervisors to be combined into a single interrupt, useful in multi-rail systems where any one rail's failure should hold the host in reset. Typical applications include microcontroller and DSP reset supervision in portable electronics, battery-powered IoT sensors, industrial PLC and factory automation controllers, FPGA configuration rail monitoring, automotive infotainment sub-system monitoring (non-safety-rated), and energy-harvesting energy management modules. The part is well suited for any compact 3.3 V (or lower) digital system requiring robust power-on-reset and brownout supervision. When designing with this device, ensure the pull-up resistor on the open-drain RESET pin is sized appropriately for the load capacitance to meet the desired reset rise-time. The MR pin can be tied to VDD or left floating if unused, but should not be left floating in noisy environments where it could couple transient noise into the reset comparator. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.