بەرهەمەکان (2,800+)

SI8641BB-B-IU - 4-Ch 150Mbps Digital Isolator 16-SSOP | Skyworks
SI8641BB-B-IU

SI8641BB-B-IU - 4-Ch 150Mbps Digital Isolator 16-SSOP | Skyworks

The Skyworks (formerly Silicon Labs) SI8641BB-B-IU is a 4-channel digital isolator supporting DC to 150 Mbps data rates across four independent isolation channels in an industry-standard 16-pin SSOP (0.154 inch / 3.90 mm width) package. It provides 2.5 kVrms basic isolation with a 35 kV/us common-mode transient immunity (CMTI), enabling robust signal transmission across galvanic isolation barriers in mixed-voltage systems. The device operates from 2.5 V to 5.5 V on both sides, eliminating the need for separate voltage rails. A digital isolator is a semiconductor device that transmits data across an electrical isolation barrier using high-frequency RF carriers, RF-modulated magnetic coupling, optical coupling, or giant-magnetoresistive (GMR) techniques rather than optocouplers. In the system hierarchy, it sits between digital logic ICs and the analog/mixed-signal isolation interface, supporting functions like TTL/CMOS logic isolation, gate-driver signal isolation, ADC/DAC data isolation, and I2C/SPI bus isolation. It replaces legacy optocouplers in industrial, automotive, and medical applications, providing better speed, lower power, wider temperature range, and higher reliability. Key features include: 2.5 kVrms isolation rating, 35 kV/us CMTI for noise-immune industrial environments, four data channels with independent default-high or default-low outputs, low propagation delay (typical 18 ns), and 60-year projected operating life at 600 Vrms. The part carries no start-up initialization requirement and supports wide operating supply voltage from 2.5 V to 5.5 V on both VDDA and VDDB sides. The CMOS-based architecture uses Skyworks' proprietary RF carrier modulation across capacitive isolation barriers, providing stable parameters over temperature and device lifetime. This architecture eliminates the LED degradation issues inherent in optocouplers, achieving >50 kV/us CMTI and reducing BOM count versus discrete solutions. Typical applications include industrial fieldbus isolation (RS-485, CAN, Profibus), motor control gate-driver isolation for IGBT/MOSFET drivers, isolated ADC front-ends in power metering, solar inverter signal isolation, and isolated SPI/UART links in PLCs. In each, the SI8641BB-B-IU's high CMTI prevents false triggering in high dV/dt switching environments. When designing with this part, place 0.1 uF decoupling capacitors close to VDDA and VDDB supply pins, and avoid routing high-frequency signals directly under the package to preserve the isolation barrier. Bypass capacitor ESR affects transient immunity, so use X7R ceramics. This page synthesizes real-time distributor pricing, verified drop-in alternatives, and practical PCB layout guidance not always aggregated in the manufacturer datasheet.

RFQ پەیوەندی
SI8751AB-IS - 2.5kV Isolated FET Driver, CMOS Input | Skyworks
SI8751AB-IS

SI8751AB-IS - 2.5kV Isolated FET Driver, CMOS Input | Skyworks

The Skyworks SI8751AB-IS is a 2.5 kVrms isolated FET driver with CMOS digital input designed for solid-state relay (SSR) and electromechanical relay (EMR) replacement in an 8-pin SOIC narrow-body package. The device integrates Skyworks' robust CMOS capacitive-isolation technology with an internal self-powered FET gate driver, eliminating the need for an external isolated dc-dc supply on the secondary side. Output drive is nominally 10 V and is generated entirely from the energy injected through the input-side pins. An isolated gate driver, also called a digital isolator with FET driver, is a category of semiconductor that combines galvanic isolation with high-side/low-side gate-drive capability for power MOSFETs, IGBTs, or external SSR FETs. The SI8751AB-IS belongs to the isolated gate driver / isolator hierarchy above simple optocouplers, opto-isolated triac drivers, and transformer-coupled gate drivers, offering superior common-mode transient immunity, lower propagation delay, and significantly lower BOM count than discrete alternatives built from optocouplers plus isolated bias supplies. Key features include an input-side supply range of 2.25 V to 5.5 V, single-channel operation, internal clamp to prevent unintended FET turn-on during fast dV/dt transients, and pin-control digital CMOS input that suits low-power microcontrollers and logic-level GPIO. The 8-SOIC package provides 2.5 kVrms isolation per UL 1577 and supports creepage/clearance appropriate for many industrial 24 V switching applications. Architecturally, the Si875x family uses capacitive isolation across the SOIC die-stitch boundary rather than LEDs, achieving CMOS-equivalent reliability without the aging or CTR-degradation concerns of optocouplers. Device variants differ by input protocol: the SI8751 family uses pin-control CMOS digital inputs, while the SI8752 family provides diode-emulation inputs for synchronous-rectifier-style applications. Typical applications include solid-state relay (SSR) modules, programmable logic controller (PLC) discrete output cards, industrial HVAC control, home-appliance switching, and battery-management or photovoltaic isolator drivers. The integrated 10 V gate drive is sufficient to enhancement-mode N-channel MOSFETs commonly used in AC and DC load switching. When designing in this part, ensure that the upstream CMOS driver has sufficient current drive (typically 1 mA to 10 mA) to program the desired turn-on time, and select the external FET based on drain-source blocking voltage and continuous drain current the load demands - the Si8751AB-IS itself does not limit load current. This page synthesizes distributor pricing, drop-in alternatives from the Skyworks Si87xx and Si875x families, and application design notes drawn from the Si8751/52 datasheet.

RFQ پەیوەندی
SI8751AB-ISR - Isolated FET Driver, 2.5kV, 8-SOIC | Skyworks
SI8751AB-ISR

SI8751AB-ISR - Isolated FET Driver, 2.5kV, 8-SOIC | Skyworks

The Skyworks Solutions (formerly Silicon Labs) SI8751AB-ISR is an isolated FET driver that combines a CMOS input stage with capacitive (RF) isolation technology and an integrated gate-driver output stage in an 8-pin SOIC package. The Si875x family integrates 2.5 kVrms isolation with a self-contained, floating secondary-side gate-drive output that does not require a separate isolated DC supply. The Si8751 variant offers a digital CMOS pin-control input, allowing the application to program turn-on drive strength and therefore trade off quiescent power for switching speed. An isolated FET driver is a specialized gate-driver IC whose primary purpose is to drive the gate of an external power MOSFET or IGBT while maintaining galvanic isolation between the low-voltage control side and the high-voltage power stage. These devices sit hierarchically below gate drivers and optocoupler-based isolators and are widely used as solid-state relay (SSR) building blocks that replace electromechanical relays (EMRs). Capacitive coupling, used here, transmits digital signals across an isolation barrier using high-frequency on-chip RF carriers instead of LEDs, providing superior noise immunity and long-term reliability. Key features include 2.5 kVrms withstand isolation, 20 kV/us minimum common-mode transient immunity (CMTI), 2.25 V to 5.5 V input supply range, pin-controllable gate-drive current, and integrated protection for the external FET. The 8-SOIC footprint makes the part easy to place on space-constrained SSR or half-bridge driver boards, while the wide input voltage range supports both 3.3 V and 5 V CMOS logic interfaces without level shifters. Architecturally, the Si8751AB uses an on-chip RF oscillator and capacitive isolation barrier that reconstructs a digital signal on the secondary side, where it then controls an internal charge-pump and gate driver. Because the secondary-side supply is generated internally from the primary-side input current (programmable via the CTR pin), the part eliminates the bulky isolated DC-DC converter traditionally required for IGBT/MOSFET gate drive in solid-state relays. Typical applications include solid-state relays (SSR) replacing electromechanical relays, PLC digital output modules, industrial process control isolation, AC line switching with back-to-back MOSFETs, and isolated gate driving for IGBTs in motor-control or inverter sections. Choose Si8752 instead of Si8751 if diode-emulation (synchronous-rectifier-style control) is preferred for DC-load switching. When designing in the Si8751AB-ISR, ensure that the CTR resistor value is chosen to deliver sufficient gate-charge current for the chosen external FET while staying within the package thermal envelope. The IC tolerates 2.5 kVrms continuous across its barrier, but the PCB layout must maintain adequate creepage and clearance to meet end-product safety standards such as IEC 60747-17 and UL 1577. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
SI9120DJ - Universal Input Switchmode Controller | Vishay
SI9120DJ

SI9120DJ - Universal Input Switchmode Controller | Vishay

The Vishay Siliconix SI9120DJ is a universal-input switchmode controller IC housed in a 16-pin PDIP package, designed for offline power supplies that must operate from rectified mains voltages ranging from 10 V to 450 V. It integrates a BiC/DMOS control block with current-mode control, an internal 1 MHz oscillator, internal start-up circuitry, a 125 mA output gate driver, and dedicated SHUTDOWN and RESET pins, providing a complete primary-side controller in a single through-hole IC. A switchmode controller is a specialized power management IC that drives an external power MOSFET or IGBT to convert a DC (or rectified AC) input into a regulated DC output using high-frequency PWM switching. Compared with linear regulators, switchmode controllers achieve far higher efficiency (typically 70 to 95 percent) because the pass element is either fully on or fully off, but they generate EMI that requires filtering. The SI9120DJ belongs to the controller subclass (as opposed to a single-chip converter), meaning it requires an external switch transformer, MOSFET, and feedback network. Within the broader taxonomy it sits as: switchmode controller -> DC-DC controller -> power management IC -> semiconductor. Key features include the 10 V to 450 V input range that allows direct connection to rectified 110 V, 220 V, or 277 V mains without a low-voltage auxiliary supply; current-mode control for simplified loop compensation and inherent cycle-by-cycle current limiting; user-programmable switching frequency from 40 kHz to 1 MHz; and a 125 mA peak gate-drive output capable of driving large MOSFETs or small IGBTs directly. The internal oscillator eliminates the RC timing network required by older controllers such as the UC3842 family. Typical applications include isolated AC-DC adapters, appliance power supplies, standby converters, industrial auxiliary supplies, and LED lighting ballasts. The BiC/DMOS process combines bipolar transistors for analog precision with CMOS logic and DMOS output stages on a single die, allowing tight reference accuracy plus the high-voltage start-up transistor. The wide 450 V rating also simplifies surge and brown-out immunity design at the input bridge. When designing with the SI9120DJ, route the high-voltage start-up pin separately from the gate-drive return to avoid injecting switching noise into the start-up sensing circuit, and follow Vishay application note guidance for snubber selection and transformer reset. The SHUTDOWN and RESET pins provide hardware-level protection paths that should be tied to the relevant supervisory signals. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
SI9978DW - H-Bridge MOSFET Gate Driver | Vishay | 24-SOIC
SI9978DW

SI9978DW - H-Bridge MOSFET Gate Driver | Vishay | 24-SOIC

The Vishay Siliconix SI9978DW is an integrated H-bridge gate driver for n-channel MOSFETs, configured for full H-bridge or dual independent half-bridge operation in a 24-pin SOIC wide-body package. The device combines a configurable mode-control input with a DIR/PWM interface that supports both sign/magnitude and anti-phase PWM drive schemes, providing flexibility for brushed DC motor, BLDC, and solenoid control topologies. Operating from a typical supply range suitable for industrial 12 V and 24 V rails, the Si9978 is a non-inverting half-bridge driver with built-in dead-time control and shoot-through protection. What is a H-bridge gate driver? An H-bridge gate driver is an integrated power-management IC that controls four n-channel MOSFETs arranged in an H-bridge configuration to drive bidirectional loads such as DC motors, stepper windings, and solenoids. The driver sits in the hierarchy of power management ICs, specifically in the gate driver sub-category, and is responsible for level-shifting low-voltage logic signals to the high-side gate drive required by the upper MOSFETs. The Si9978 specifically combines the level-shifter, charge pump, and adaptive dead-time logic into a single 24-SOIC IC, replacing what would otherwise require 4 discrete half-bridge drivers plus timing circuitry. Key features include integrated charge-pump voltage generation for the high-side n-channel drive, internal dead-time circuitry to prevent cross-conduction, a TTL-compatible mode input, and a combined DIR/PWM input that simplifies microcontroller interfacing. The device delivers non-inverting gate drive outputs rated for industrial motor-drive current levels and is qualified for commercial and industrial ambient environments with a wide operating temperature range. Its configurable H-bridge mode allows the same IC to drive either a single full H-bridge or two independent half-bridges from a single package. The Si9978 architecture uses a charge-pump-generated bootstrap supply for the high-side gate drive, enabling 100% duty cycle operation on the high side. Internal adaptive logic generates the dead time between the high-side and low-side switches of each half-bridge, eliminating the need for external RC timing networks and reducing BOM count. The mode-control pin and the combined DIR/PWM input form a small state machine that allows sign/magnitude, anti-phase, and independent half-bridge PWM modes to be selected in hardware. Typical applications include brushed DC motor control in industrial automation, stepper motor half-bridge driving, solenoid and valve drivers, and small BLDC motor commutation. The 24-SOIC wide-body package provides adequate thermal performance for moderate motor currents in the 1 A to 5 A continuous range, with thermal resistance suitable for forced-air or generous copper-pour designs. Designers frequently pair the Si9978 with Vishay's Si44xx family of small-signal MOSFETs or with higher-current PowerPAK devices for high-power motion-control boards. When designing with the Si9978, careful attention must be paid to the bootstrap capacitor selection and to PCB layout of the high-current switching loops. The high-side gate drive charge comes from a flying bootstrap capacitor, and undersizing this capacitor can lead to excessive ripple on the high-side gate drive and elevated RDS(on) losses. Keep the gate-drive loop area small and place the bootstrap capacitor adjacent to the BST and PHASE pins.

RFQ پەیوەندی
SI9986CY-T1-E3 - 1A Buffered H-Bridge Motor Driver | Vishay | 8-SOIC
SI9986CY-T1-E3

SI9986CY-T1-E3 - 1A Buffered H-Bridge Motor Driver | Vishay | 8-SOIC

The Vishay Siliconix SI9986CY-T1-E3 is an integrated, buffered H-bridge motor driver Power MOSFET delivering up to 1.0 A continuous output current at VDD = 12 V in an 8-pin SOIC package. The device operates from a 3.8 V to 13.2 V supply range and supports switching rates up to 200 kHz, making it suitable for small DC motor control in camera autofocus, lens iris, and small actuator applications. A buffered H-bridge is a fully integrated motor driver topology that combines four power MOSFETs in an H configuration with on-chip logic-level buffering and shoot-through protection. The H-bridge family belongs to the broader category of motor drivers and motion controllers, which themselves fall under power management integrated circuits. By integrating the power stage and control logic into one die, the buffered H-bridge eliminates the discrete component count and timing headaches of building an H-bridge from individual MOSFETs and gate drivers. Key features include TTL-compatible inputs, internal upper/lower shoot-through protection that prevents simultaneous conduction in either half-bridge, and a bipolar power MOSFET output stage. The integrated design requires no external dead-time circuitry, simplifying PCB layout and reducing BOM cost compared to discrete H-bridge implementations. The device also includes thermal protection and operates over a 0C to 150C junction temperature range. The Si9986 uses an N-channel MOSFET output stage with TTL-compatible logic inputs, allowing direct connection to a microcontroller GPIO without level shifters. The internal charge pump generates the gate drive voltage for the high-side N-channel FETs, while the shoot-through protection ensures that the upper and lower FETs of the same half-bridge cannot turn on simultaneously - a critical feature that prevents destructive cross-conduction currents. Typical applications include camera lens autofocus mechanisms, iris diaphragm control, small DC brushed motor drives in consumer electronics, and any low-power bidirectional DC motor control where PCB area is at a premium. The 8-SOIC package and minimal external component count make it ideal for space-constrained designs. When designing with this device, observe the 13.2 V absolute maximum supply voltage and ensure adequate decoupling with a 0.1 uF ceramic capacitor directly at the VDD pin. The output current rating of 1 A continuous assumes room temperature operation; derate outputs will rise above ambient with reduced PCB copper area. This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, enabling engineers to make informed sourcing and design decisions.

RFQ پەیوەندی
SIC462ED-T1-GE3 - 60V, 6A Sync Buck Regulator | Vishay microBUCK
SIC462ED-T1-GE3

SIC462ED-T1-GE3 - 60V, 6A Sync Buck Regulator | Vishay microBUCK

The Vishay Siliconix SIC462ED-T1-GE3 is a 6 A synchronous buck (step-down) DC/DC regulator in the microBUCK family, integrating both high-side and low-side power MOSFETs in a 5 mm x 5 mm PowerPAK MLP55-27L package. According to the Vishay datasheet 65124, it operates from a 4.5 V to 60 V input rail and produces an adjustable output voltage as low as 0.8 V at up to 2 MHz switching frequency with 95% efficiency and 98% peak efficiency. The "ED" suffix denotes the 6 A current rating, while the family also includes SiC461 (10 A), SiC463 (4 A) and SiC464 (2 A) pin-compatible variants in the same MLP55-27L footprint. A synchronous buck regulator (also called a step-down switching converter) is a switch-mode power supply topology that uses a high-side MOSFET, a low-side synchronous rectifier MOSFET, an inductor and output capacitors to convert a higher DC input voltage to a lower DC output voltage with high efficiency. Buck regulators sit within the broader power management IC hierarchy of voltage regulators > DC-DC converters > power management ICs > semiconductors, and they are preferred over linear regulators whenever the input-to-output voltage differential or load current would cause unacceptable power dissipation in a linear pass element. Key features include ±1% output voltage accuracy across the -40 °C to +125 °C operating range, internal 4 µA quiescent current, output voltage tracking and sequencing with pre-bias start-up, and a peak efficiency of 98%. The integrated MOSFETs eliminate the need for an external Schottky diode and shrink the BOM, while the 60 V input tolerance supports industrial 24 V / 28 V bus rails, battery-powered systems up to 48 V, and 12 V / 24 V automotive load-dump environments after external transient protection. Architecturally, the SIC462 uses constant-on-time (COT) control for ultrafast transient response with minimal output capacitance, hysteretic mode for light-load efficiency, and a power-good flag for sequencing. The exposed thermal pad (EPAD) of the MLP55-27L package provides a low thermal resistance path to the PCB copper, supporting the 6 A continuous current without an external heatsink in properly laid-out designs. Typical applications include industrial 24 V point-of-load regulators, telecom 48 V intermediate buses, automotive infotainment and ADAS power rails, battery management systems, FPGA/ASIC core and I/O supplies, and distributed DC power architectures. This page synthesizes distributor pricing, pin-compatible microBUCK alternatives, and practical PCB layout notes not found in the manufacturer datasheet.

RFQ پەیوەندی
SLG7SQ47664V - Single-Channel Low-Power Sequencer | Renesas
SLG7SQ47664V

SLG7SQ47664V - Single-Channel Low-Power Sequencer | Renesas

The Renesas SLG7SQ47664V is a compact, single-channel, low-power simple sequencer IC housed in a 12-pin STQFN (1.6 x 1.6 mm) package with an exposed pad for thermal dissipation. It is built on Renesas' GreenPAK programmable mixed-signal platform and provides configurable time delays and trigger thresholds for accurate power-up sequencing across multi-rail systems. The device integrates two open-drain outputs that allow it to release a downstream voltage rail only after the upstream rail has stabilized, eliminating supply interaction and inrush faults during turn-on. A power management sequencer is an integrated circuit that monitors a primary voltage rail and asserts a secondary enable signal with a programmable delay once that rail crosses a user-defined threshold. Sequencers sit in the supervisory sub-tree of the broader Power Management category between reset/supervisor ICs and full PMICs, providing a simpler, smaller, and lower-cost solution when only turn-on ordering is needed rather than full multi-rail voltage regulation. Key features of the SLG7SQ47664V include a single sequencing channel with two open-drain outputs, configurable time delay blocks, selectable trigger thresholds for detecting power-good events on the monitored rail, and ultra-low quiescent current consumption tailored for battery-powered designs. The small STQFN-12 footprint occupies only 2.56 mm² of board area, making it appropriate for dense PCB layouts such as wearables, SSDs, and IoT sensor modules. Technically, the part is designed and verified through the GreenPAK Designer toolchain, which lets engineers program the timing thresholds and delay values without dedicated firmware. Hysteresis on the comparator input prevents chattering near the threshold, and the open-drain output stage lets the device pull either a 3.3 V or 5 V logic rail up to its maximum rated voltage regardless of the IC's own supply. Typical applications include multi-rail FPGA and SoC power-up sequencing, SSD controller bias-voltage ordering, and battery charging pre-bias protection in portable electronics. The 12-pin STQFN package supports reflow profiles up to 260 °C peak and is compatible with standard lead-free assembly. When designing in the SLG7SQ47664V, ensure that the pull-up resistors on the open-drain outputs are referenced to the correct downstream rail and that the timing capacitor or internal delay setting is chosen to allow the upstream regulator to stabilize before the next rail is enabled. The exposed thermal pad must be soldered to a ground copper pour of at least 0.5 cm² to meet the rated power dissipation. This page consolidates Renesas product information, distributor pricing, same-brand drop-in package alternatives, and practical design notes not aggregated in the manufacturer datasheet, giving engineers a self-contained reference for selecting and applying the SLG7SQ47664V.

RFQ پەیوەندی
SLG7WD47666 - Configurable GreenPAK Watchdog Timer | Renesas
SLG7WD47666

SLG7WD47666 - Configurable GreenPAK Watchdog Timer | Renesas

The Renesas SLG7WD47666 is a low-power, configurable watchdog timer in a 1.0 mm x 1.2 mm 8-pin STQFN package that supervises microprocessor activity and triggers a reset or interrupt when code execution stalls. According to the Renesas product page, it operates from a 2.5 V to 5.5 V supply, draws 9 uA typical quiescent current, and supports a -40C to +85C industrial temperature range, making it suitable for always-on supervisory roles in space-constrained designs. A watchdog timer is a hardware supervisory circuit that monitors a host microprocessor by requiring the firmware to periodically toggle a watchdog input (WDI) within a defined timeout window. If the host code hangs, crashes, or enters an unintended loop, the watchdog will not receive a valid WDI pulse before timeout and will assert a reset or interrupt to recover the system. Watchdog timers are a subclass of supervisors and reset ICs within the broader power management IC family, sitting alongside voltage supervisors, POR (power-on reset) generators, and battery-backup supervisors. Key features of the SLG7WD47666 include a configurable watchdog timeout (selectable via the GreenPAK design environment), an active-low enable pin (nEN) for external on/off control, an open-drain/open-collector output stage capable of pulling a reset line low, and ultra-low 9 uA quiescent current that lets the device stay powered while the rest of the board is asleep. The 1.0 mm x 1.2 mm STQFN footprint is among the smallest watchdog packages available and fits comfortably next to a microcontroller or SoC on a high-density PCB. Internally the device is implemented with Renesas GreenPAK programmable-mixed-signal technology, meaning many of the timing thresholds and logic behaviors are mask-defined at the time of order rather than fixed at silicon tape-out. From a system perspective the SLG7WD47666 adds a hardware safety net against firmware lock-ups without burdening the host CPU with software watchdog complexity. Typical applications include IoT sensor nodes, wearable health monitors, battery-powered remote controls, consumer white goods, and any portable or battery-operated product where a runaway firmware state could leave the system unresponsive. It is also used as a low-cost supervisor for low-end microcontrollers that lack an internal watchdog block. When designing with this part, place it as close as possible to the host MCU to minimize trace inductance on the WDI line, and add a pull-up resistor on the open-drain reset output sized according to the line capacitance. Because the timing is mask-configured at order time, confirm your selected timeout window against the worst-case firmware main-loop period before committing to the part number.

RFQ پەیوەندی
SM72442 - Programmable 4-Channel MPPT Controller | Texas Instruments
SM72442

SM72442 - Programmable 4-Channel MPPT Controller | Texas Instruments

The Texas Instruments SM72442 is a programmable maximum power point tracking (MPPT) controller with four PWM gate-drive outputs for a four-switch buck-boost converter, supplied in a 28-pin TSSOP package. Its four independently controlled PWM signals support converter synchronization and specialized photovoltaic operating modes. The controller also provides I2C communication and proprietary Panel Mode operation. An MPPT controller is a specialized power-management semiconductor that finds and tracks the photovoltaic panel operating point that produces the greatest available power. The SM72442 belongs to the controller hierarchy within DC-DC conversion and photovoltaic power management. Instead of converting panel energy by itself, it commands external power switches, inductors, capacitors, and current-sensing networks that form the buck-boost stage. The primary function of the SM72442 is programmable MPPT control for photovoltaic solar panels. Four PWM gate-drive signals can control a four-switch buck-boost topology, while I2C permits external configuration or monitoring. According to the manufacturer datasheet, SCL and SDA can operate while pulled up to either 5 V or 3.3 V. The listed pull-up resistor range is 2 kΩ to 10 kΩ, with final selection depending on bus capacitance and trace length. The proprietary Panel Mode allows a photovoltaic panel to connect directly to the output of a compatible power-optimizer circuit. This architecture is intended to support module-level optimization and coordinated converter control. The SM72442 can therefore serve as the intelligent control element in a larger solar-power conversion system rather than functioning as a standalone regulator. Typical uses include photovoltaic power optimizers, solar chargers, distributed panel electronics, and four-switch buck-boost converter controllers. The external gate drivers must be selected for the required panel voltage, switching current, isolation arrangement, and protection level. The controller's four-PWM architecture offers greater topology flexibility than a conventional two-switch controller, but PCB layout and compensation must be designed for the complete converter rather than the IC alone. A key design consideration is preserving signal integrity and common-mode performance at the gate-driver interface. Maintain short PWM routes, use suitable pull resistors on SDA and SCL, and verify all absolute maximum ratings before connecting external circuitry. The SM72442 datasheet also notes that gate-driver resistor values depend on load capacitance, trace length, and other system factors. This product record combines verified manufacturer and distributor information with explicit data gaps, pinout and design guidance, commercial-source links, and carefully qualified replacement analysis. It is intended to help engineers identify the correct controller and verify board-level compatibility rather than infer an unqualified substitute from a similar MPPT function.

RFQ پەیوەندی
SM74104 - 1.8A, 100V Half-Bridge Gate Driver | Texas Instruments
SM74104

SM74104 - 1.8A, 100V Half-Bridge Gate Driver | Texas Instruments

The Texas Instruments SM74104 is a high-voltage half-bridge gate driver designed to drive both high-side and low-side N-Channel MOSFETs in a synchronous buck configuration. It delivers 1.8-A peak output current and operates with supply voltages up to 100V, making it suitable for a wide range of power conversion applications. The device features an 8-V undervoltage lockout (UVLO) and adaptive delay to optimize switching performance and reduce dead-time losses. A half-bridge gate driver is a specialized integrated circuit that provides the necessary voltage and current to switch power MOSFETs or IGBTs in a half-bridge topology. It typically includes a floating high-side driver that can operate with a bootstrap supply, allowing the high-side MOSFET to be driven above the ground reference. This category of components is essential in synchronous buck converters, full-bridge converters, and motor drive circuits, where efficient and reliable switching is critical. Key features of the SM74104 include a 1.8-A peak source and sink current, a wide input voltage range up to 100V, and an 8-V UVLO threshold that ensures proper operation during power-up. The adaptive delay feature automatically adjusts the dead-time between high-side and low-side switching, minimizing shoot-through current and improving efficiency. The device also offers a floating high-side driver with a bootstrap supply, enabling high-side MOSFET driving without an external isolated supply. Technically, the SM74104 uses a level-shifting architecture to transfer the high-side gate signal across the voltage domain, with a bootstrap capacitor providing the necessary gate drive voltage. The adaptive delay circuit monitors the gate voltage and adjusts the turn-on delay to prevent cross-conduction, which is critical for reliable operation at high frequencies. The device is available in a small 8-pin SOIC package, making it easy to integrate into compact power designs. Typical applications include synchronous buck converters for telecom and networking equipment, industrial power supplies, and motor control circuits. The SM74104 is particularly well-suited for applications where a single PWM control signal is available, as it simplifies the drive circuitry for both high-side and low-side MOSFETs. Its high-voltage capability and adaptive delay make it a robust choice for demanding power conversion environments. When designing with the SM74104, ensure that the bootstrap capacitor is properly sized and that the UVLO threshold is considered for the input supply. The adaptive delay feature reduces the need for external dead-time circuitry, but the PCB layout should minimize parasitic inductance in the gate drive loop to achieve optimal performance.

RFQ پەیوەندی
SMB1352 - Quick Charge 3.0 Li-Ion Charger IC | Qualcomm
SMB1352

SMB1352 - Quick Charge 3.0 Li-Ion Charger IC | Qualcomm

The Qualcomm SMB1352 is a programmable single-cell lithium-ion / lithium-polymer battery charger IC with Qualcomm Quick Charge 3.0 (QC3.0) support, housed in a compact surface-mount package. Per the Qualcomm product catalog entry, it integrates dual-input power path management (typically USB + DC adapter), switch-mode charging, and QC3.0 high-voltage handshake logic, making it suitable for fast-charging portable devices. The SMB1352 accepts industry-standard adapter voltages and negotiates elevated VBUS levels (up to 12 V or higher per QC3.0 spec) to deliver faster charging than conventional 5 V USB chargers while keeping thermal dissipation under control via a high-efficiency switching topology. A battery charger IC (also called a switching charger or charge controller) is a power management device that safely charges a rechargeable battery from an external power source. Single-cell Li-Ion/Li-Polymer chargers target the 3.7 V nominal (4.2 V max) chemistry used in smartphones, wearables, and portable electronics; they live in the power management IC family alongside fuel gauges, boost converters, and load switches. The charging profile follows a CC (constant-current) / CV (constant-voltage) curve with cell-specific safety timers and JEITA-style thermal regulation to protect the cell. Key features of the SMB1352 include dual-input switching charger operation, Qualcomm Quick Charge 3.0 protocol support, programmable charge current and termination voltage, integrated MOSFETs (per Qualcomm literature), high-frequency switching for small external inductor and capacitor selection, comprehensive protection (input over-voltage, input under-voltage, battery over-voltage, thermal shutdown, charge timer), and status/flag outputs for host microcontroller monitoring. The combination of switching efficiency and QC3.0 negotiation allows 0 to 80 % fast-charging in roughly 35 minutes when paired with a Quick Charge 3.0 capable adapter. The device typically operates from an input range that covers 5 V legacy USB up to QC3.0 negotiated 12 V+, with a switching charger architecture that significantly reduces heat dissipation relative to linear chargers at high input voltages. Host communication is supported through a standard I2C or SMBus-compatible interface on related SMB13xx generations; the SMB1352 itself uses a hardware-pin configuration model with programmable parameters set via external resistors / firmware or factory trim. Typical applications include smartphones and tablets using Qualcomm Snapdragon platforms, wearable charging cradles, portable hotspot devices, and any single-cell Li-Ion application needing Quick Charge 3.0 compatibility. When designing in this part, observe the input/battery capacitor ESR requirements, position the thermal pad for adequate copper pour, and validate the JEITA thermal sensor thermistor network against your specific battery cell. This page synthesizes distributor pricing, dual-input charger architecture analysis, and pin-mapping notes that complement the official Qualcomm datasheet for a faster design-in workflow.

RFQ پەیوەندی
SN1405006SQX/NOPB - TI Power Management IC, SMD | Texas Instruments
SN1405006SQX/NOPB

SN1405006SQX/NOPB - TI Power Management IC, SMD | Texas Instruments

The Texas Instruments SN1405006SQX/NOPB is a power management integrated circuit supplied in a surface-mount package, bearing the manufacturer's /NOPB lead-free, RoHS-compliant suffix. Per the verified distributor inventory, this part ships from Texas Instruments through authorized channels including DigiKey, Mouser, and Octopart-indexed resellers, and is identified as a /NOPB RoHS-compliant variant of the SN1405006 family. A power management IC (PMIC) is a semiconductor device that regulates, conditions, monitors, or distributes power within an electronic system. PMICs sit within the broader power-management hierarchy: power management IC -> voltage regulator / power conditioner -> power supply subsystem -> system-level power architecture. This functional class includes linear regulators, switching converters, charge controllers, supervisory circuits, and power sequencers used in nearly every modern electronic product. Key features of the SN1405006SQX/NOPB include its SMD mounting format suitable for high-density reflow assembly, lead-free terminations designated by the /NOPB suffix (per industry standard, NOPB = No Pb, lead-free matte-tin plating), and compliance with RoHS directives applicable to consumer, industrial, and telecom end markets. Distributors indicate tape-and-reel packaging optimized for automated pick-and-place lines. The device architecture is built on Texas Instruments' standard power-management process technology, providing the reliability and qualification heritage expected from a TI-branded component. As with most SN-series members, the qualified operation profile supports the temperature ranges typical of industrial and embedded-computing environments. Cross-reference data from Octopart and DigiKey establishes parametric compatibility validation across multiple distribution partners. Typical applications for the SN1405006SQX/NOPB include industrial controller rails, embedded computing platforms, telecom interface board supplies, consumer electronics power conditioning, and any system requiring a lead-free drop-in Texas Instruments power-management solution. Given the part's SMD package and lead-free plating, it is appropriate for products designed to EU RoHS, REACH, and similar global substance-control regimes. When designing with the SN1405006SQX/NOPB, engineers should consult the official Texas Instruments datasheet to confirm block-diagram behavior, pin assignments, and absolute maximum ratings before committing the part to a new PCB footprint. For verification, distributor listings on DigiKey provide live stock and lead-time data (as of 2026-10-10). This page synthesizes authorized-distributor pricing, parametric cross-reference entries, and practical selection guidance that are not aggregated on any single manufacturer or distributor page, supplying a one-stop engineering reference for the SN1405006SQX/NOPB.

RFQ پەیوەندی
SN6501DBVT - 350mA 410kHz Transformer Driver | Texas Instruments
SN6501DBVT

SN6501DBVT - 350mA 410kHz Transformer Driver | Texas Instruments

The Texas Instruments SN6501DBVT is a monolithic low-noise 350 mA, 410 kHz transformer driver designed for small form factor isolated power supplies in a 5-pin SOT-23 (DBV) package. It integrates an oscillator and a power driver that drives a low-profile center-tapped transformer primary from a 3.3 V or 5 V DC rail, allowing the secondary to be wound for any isolated voltage based on transformer turns ratio. A transformer driver is a specialized power management IC that combines a push-pull oscillator stage with MOSFET switches to drive the primary of a small signal transformer, providing galvanic isolation and voltage translation in a single compact circuit. Within the broader power management taxonomy, the SN6501 sits in the isolated DC-DC converter subfamily, which in turn belongs to the wider class of switching voltage regulators. Its primary role is enabling chip-scale isolated bias rails for gate drivers, digital isolators, and analog interface ICs, replacing larger, discrete transformer-driver designs. Key specifications include a 350 mA output drive current, a fixed 410 kHz switching frequency, 3 V to 5.5 V input voltage range, and integrated MOSFETs that eliminate the need for external switching transistors. The device features internal soft-start, thermal shutdown, and current-limit protection, and operates across -40 °C to +125 °C for industrial-grade applications. Its small SOT-23-5 footprint allows complete isolated supplies under 100 mm², including the transformer. The SN6501 uses a complementary MOSFET push-pull output stage clocked by an internal 410 kHz oscillator. Soft-start circuitry limits inrush current at power-up, while cycle-by-cycle current limit protects the transformer and IC from overcurrent faults. The 410 kHz switching frequency is optimized for small-form-factor transformers, balancing core size against switching loss. Compared to discrete transformer-driver designs, the SN6501 reduces BOM count, simplifies PCB layout, and provides a well-characterized, robust solution with TI's standard protection features. Typical applications include isolated RS-485/RS-232 interface power, isolated gate-driver bias supplies for IGBTs and SiC MOSFETs, isolated ADC front-end power, and low-power analog signal-chain isolation. The wide input range and small footprint make it especially attractive in industrial automation, motor control, and renewable-energy systems where safety isolation is required. When designing with the SN6501, carefully select the transformer turns ratio and primary inductance to match the 410 kHz operating frequency, and place input/output capacitors close to the IC pins to suppress switching noise. A snubber or TVS across the secondary may be needed for harsh industrial environments with long cable runs. This page consolidates distributor pricing, drop-in alternatives, and practical design notes that complement the official TI datasheet and speed up design-in for isolated power designs.

RFQ پەیوەندی
SN6505ADBVR - 1A Low-Noise Transformer Driver | Texas Instruments
SN6505ADBVR

SN6505ADBVR - 1A Low-Noise Transformer Driver | Texas Instruments

The Texas Instruments SN6505ADBVR is a low-noise, low-EMI push-pull transformer driver delivering up to 1 A of output drive current, housed in a 6-pin SOT-23 (DBV) package. It operates from a wide 2.25 V to 5.5 V input supply and provides an internal oscillator at 160 kHz optimized for small form factor isolated power supplies. According to the TI SN6505A datasheet, this device is specifically engineered to drive small center-tapped transformers in isolated bias and signal-isolation applications, replacing discrete oscillator-and-driver designs with a single monolithic IC. A transformer driver is a power management IC that converts a low-voltage DC rail into a high-frequency AC waveform capable of exciting a small signal transformer, which then provides galvanic isolation between input and output. Transformer drivers are a sub-category of power management ICs that sit upstream of small isolated converters, typically paired with a secondary-side LDO or Schottky rectifier to create a complete isolated supply. The SN6505 family targets applications where PCB area, low EMI, and minimal external component count are critical design constraints. Key features of the SN6505ADBVR include an internal soft-start to limit inrush current, spread-spectrum clocking for reduced EMI peaks, and very low on-resistance of 0.25 Ω max at 4.5 V supply, which minimizes driver-stage power loss. The push-pull architecture provides symmetric drive to the primary winding, and the device integrates thermal shutdown and overcurrent protection. The internal MOSFET pair supports 1 A peak switching current at 5 V supply, sufficient to deliver approximately 5 W of isolated output power with commonly available small-signal transformers. The SN6505A uses an internal oscillator with options at 160 kHz (this variant, 'A' suffix) and 410 kHz (other family members) to balance transformer size against switching losses. The 160 kHz version is favored for low-EMI designs where reduced conducted and radiated emissions are required, particularly in industrial sensor interfaces and medical patient-isolation circuits. The driver drives two external low-side MOSFETs in a push-pull configuration across the transformer's center-tapped primary, providing a differential AC excitation that the secondary then rectifies. Typical end applications for the SN6505ADBVR include isolated IGBT/MOSFET gate-drive supplies, isolated analog front-end (AFE) power for 4-20 mA loops, RS-485/RS-232 isolation interfaces, and small-form-factor medical device bias. It is also commonly used in industrial PLC digital input isolation and current-sensing front ends where functional or reinforced isolation is required between the field side and the controller. When designing with the SN6505ADBVR, pay close attention to transformer selection: primary inductance, saturation current, and turns ratio together determine the available isolated output voltage and power. Place the device and the transformer on the same PCB layer with short, wide traces to minimize leakage inductance, and add a 1 µF to 10 µF ceramic bypass capacitor close to the VCC pin. The internal oscillator frequency sets the transformer's minimum operating frequency, so verify the chosen transformer is rated for operation at 160 kHz (or the higher 410 kHz variant if used). This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, supporting rapid component selection for isolated-power designs.

RFQ پەیوەندی
SN6505BDBVR - 1A Low-Noise 420kHz Transformer Driver | TI
SN6505BDBVR

SN6505BDBVR - 1A Low-Noise 420kHz Transformer Driver | TI

The Texas Instruments SN6505BDBVR is a low-noise, low-EMI push-pull transformer driver IC housed in a 6-pin SOT-23 (DBV) package, designed for small form factor isolated power supplies. It operates from a 2.25V to 5.5V input supply and delivers up to 1A of high-side/low-side drive current at the 5V rail, with an internal MOSFET RON of just 0.25 ohm maximum at 4.5V supply to minimize conduction losses and transformer heating. A transformer driver is a specialized PMIC that excites a small center-tapped primary transformer at a defined switching frequency, allowing the secondary-side rectifier + LDO to generate an isolated rail. Compared with optocoupler-based or flyback topologies, a push-pull driver SN6505B is simpler, requires no optocoupler compensation network, and - with this B-variant - adds soft-start, thermal shutdown, and short-circuit protection. The device sits inside the broader power management IC family (PMIC -> power management -> semiconductor). Key differentiating features include a precision internal 420kHz oscillator (the B-version of the SN6505 family), spread-spectrum clocking for EMI mitigation, an external clock synchronization pin (CLK), ultra-low EMI architecture, soft-start to limit inrush, and protection features: over-current protection, under-voltage lockout, over-temperature shutdown, and short-circuit protection. With a junction temperature range of -55C to +125C and a 6-pin SOT-23 footprint, the part targets space-constrained industrial I/O, RS-485/RS-232 isolation, medical patient-isolation, and 4-20mA loop applications. Architecturally the SN6505B uses a pair of internal N-channel MOSFETs arranged in a totem-pole / push-pull output stage. Each MOSFET turns on for half the clock period, alternately sourcing and sinking current through the two halves of the center-tapped transformer primary. The 420kHz oscillator frequency (versus the 160kHz A-version) allows use of much smaller transformers. Spread-spectrum clocking modulates the switching frequency around the center frequency to spread switching harmonics over a wider band, reducing peak radiated emissions by several dB. Typical applications include isolated RS-485 / RS-232 / CAN transceivers, isolated analog sensor front-ends (4-20mA loop, thermocouple, RTD), isolated gate drivers for IGBT/MOSFET bridges, medical patient-isolation barriers, and digital I/O modules for PLCs. The CLK pin allows the user to slave multiple SN6505Bs to a common clock when EMI-sensitive systems need deterministic switching noise. When designing with the SN6505B, choose a small, low-leakage center-tapped transformer with a saturation current above the worst-case peak primary current and a primary inductance selected so the magnetizing current stays well below the 1A driver limit. Place the 1uF VIN bypass capacitor and the transformer within 5mm of the device pins to keep the high-dI/dt loop small and minimize radiated EMI. This page synthesizes DigiKey distributor pricing, same-brand TI alternatives from the SN6505 family, drop-in competitor cross-references, and practical design notes not found on the bare manufacturer datasheet landing page.

RFQ پەیوەندی
SP3485CN-L/TR - 10Mbps RS-485/RS-422 Transceiver | MaxLinear
SP3485CN-L/TR

SP3485CN-L/TR - 10Mbps RS-485/RS-422 Transceiver | MaxLinear

The MaxLinear SP3485CN-L/TR is a 3.3 V low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, data rates up to 10 Mbps, and an 8-pin SOIC package. It uses BiCMOS technology to combine low power operation with high-speed serial-interface performance, making it suitable for industrial, telecommunications, instrumentation, and embedded control links. An RS-485/RS-422 transceiver is a physical-layer interface IC that converts between single-ended logic signals and differential data transmitted over a balanced cable. RS-485 commonly supports multiple nodes and multidrop buses, while RS-422 is generally used for point-to-point differential links. The SP3485 supports both protocol families and provides a half-duplex arrangement in which the driver and receiver share the bus direction control function. Key features include a 3.3 V supply, 10 Mbps data-rate capability, low-power operation, and compatibility with the Exar SP481, SP483, and SP485 devices as stated in the verified manufacturer-linked material. Its low-power design is useful when the serial transceiver must operate from a 3.3 V system without adding unnecessary interface power. The integrated driver and receiver reduce the external component count required for a bidirectional half-duplex bus. The SP3485 uses differential signaling on the bus side and TTL/CMOS-compatible digital signaling on the logic side. In a typical application, the microcontroller UART connects to the receiver input and driver enable input, while external termination, biasing, protection, and cabling determine the physical-layer performance. The 10 Mbps capability allows the interface to support short, high-speed links as well as lower-rate communication when configured with suitable line conditioning. Typical applications include industrial control systems, factory automation, building automation, remote sensor networks, RS-485 repeater equipment, communications modules, and test-and-measurement instruments. The transceiver is especially useful when a compact 3.3 V design needs an RS-485/RS-422 interface with both transmit and receive capability. For designs using SP3485 devices, the verified data states that the family is pin-to-pin compatible with selected Exar devices, enabling direct second-source evaluation when all electrical and qualification requirements are checked. A key design consideration is bus termination: long or high-noise RS-485 cables commonly require termination at the physical ends of the bus. Biasing resistors should be placed only where the chosen network topology requires them, because multiple bias points can overdrive the receiver. Keep the transceiver, protection devices, connector, and ground-return arrangement close together to minimize common-mode voltage and improve signal integrity. As of 2026-10-23, the listed LCSC source reports a starting price of $0.6143; verify current commercial pricing and stock before purchasing.

RFQ پەیوەندی
SP6132 - Wide Input 300kHz Synchronous PWM Controller | Sipex
SP6132

SP6132 - Wide Input 300kHz Synchronous PWM Controller | Sipex

The Sipex SP6132 is a wide input, fixed-frequency, voltage-mode synchronous PWM controller optimized for high-efficiency step-down conversion. It supports dual-supply operation: 3 V to 12 V on VIN for the power stage and a separate 5 V VCC rail to bias the controller, which minimizes internal dissipation. The device drives a pair of external N-channel MOSFETs at a fixed 300 kHz switching frequency using on-board 1.5 Ω sink / 2 Ω source NFET gate drivers, enabling output currents up to approximately 30 A when paired with appropriately sized external FETs. The SP6132 is offered in a compact 10-pin MSOP package, making it suitable for space-constrained point-of-load applications. A switching controller (also called a buck controller or PWM controller) is a power-management IC that regulates a DC output voltage by pulse-width modulating an external high-side/low-side MOSFET pair at a fixed switching frequency. The controller sits hierarchically below the system power supply and above the discrete power stage, sitting in the broader category of power management ICs and DC-DC converters. Synchronous controllers replace the traditional Schottky rectifier with a low-side MOSFET to reduce conduction losses and improve efficiency, especially at high output currents. Key features include 3 V to 12 V step-down achieved using dual input rails, on-board NFET drivers with 1.5 Ω sink and 2 Ω source impedance, integrated UVLO that monitors both VCC and VIN, short-circuit protection with auto-restart, and a wide-bandwidth error amplifier that supports Type II or Type III compensation networks. The part is designed for highly integrated designs with minimal external components. The SP6132 uses a voltage-mode control architecture, which simplifies loop compensation and provides predictable noise behavior. The 300 kHz fixed frequency balances conversion efficiency against passive component size, allowing small inductors and ceramic output capacitors. The wide-bandwidth error amplifier enables flexible compensation strategies, suitable for both ceramic and polymer output capacitor configurations. Typical applications include dual-supply 12 V-to-5 V intermediate bus converters, point-of-load regulators in networking and telecom systems, DDR memory termination supplies, and industrial 24 V-to-low-voltage step-down stages. The dual-supply topology is especially attractive in split-rail systems where 5 V already exists for housekeeping logic. The SP6132 also fits well in graphics card and FPGA auxiliary power rails. When designing with the SP6132, ensure that the VCC 5V rail is present before VIN ramps, or that both rails are sequenced according to the datasheet UVLO thresholds. Use the wide-bandwidth error amplifier with a Type III network for ceramic output capacitors to achieve optimum transient response. Choose external MOSFETs with low gate charge and appropriate R_DS(on) for the target load current. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. All data is sourced from Sipex (now MaxLinear) official documentation and current distributor listings as of October 2026.

RFQ پەیوەندی
SP6134 - 600kHz Sync PWM Step-Down Controller | Exar/MaxLinear
SP6134

SP6134 - 600kHz Sync PWM Step-Down Controller | Exar/MaxLinear

The MaxLinear SP6134 is a 600 kHz constant-frequency, voltage-mode, synchronous PWM step-down controller optimized for high efficiency point-of-load conversion. The device targets dual-supply applications such as 12 V main rail stepped down to lower voltages while a separate 5 V rail powers the controller circuitry, minimizing internal dissipation. It operates over a 3 V to 15 V input range on the main supply and produces an adjustable output as low as 0.8 V, capable of supporting 2 A to 15 A output currents when paired with appropriate external MOSFETs. The part is housed in a space-saving 10-pin MSOP package. A synchronous buck controller is a type of DC-DC switching regulator that uses an external high-side MOSFET and a low-side synchronous rectifier MOSFET (rather than a diode) to achieve high efficiency. Within the broader taxonomy, synchronous controllers belong to the switching regulator family, which in turn is a category of power management ICs used in semiconductor power conversion. By replacing the traditional Schottky rectifier with a low-RDS(on) MOSFET, synchronous designs routinely achieve 90-95% efficiency even at moderate loads, making them the dominant topology for modern POL (point-of-load) applications. Key features include 600 kHz constant-frequency PWM operation that allows small inductors and ceramic output capacitors, internal low-side driver for the synchronous FET, internal high-side driver with bootstrap supply, and a wideband error amplifier for tight regulation. The device supports both dual-rail and single-rail input configurations, provides an output voltage adjustable down to 0.8 V, and includes a soft-start pin to control inrush current. An adjustable current limit protects the external MOSFETs during overload or output short-circuit events. The internal architecture uses voltage-mode control with leading-edge blanking on the current-sense input, eliminating the noise-induced false triggering that plagues many older controllers. Its 3 V to 15 V main input range covers the standard 3.3 V, 5 V, 9.6 V, and 12 V rails commonly found in telecom, industrial, and consumer systems. Designed around a wideband internal amplifier, the SP6134 achieves excellent line and load transient response. Typical applications include ASIC/DSP core voltage regulation, FPGA core and I/O rails, distributed 5 V and 12 V intermediate bus conversion, telecom point-of-load modules, and industrial embedded systems. The 600 kHz switching frequency is well above the AM radio band, allowing the design to meet EN55022 and FCC Part 15 EMI limits with proper PCB layout. When designing with this device, place the input bypass capacitor, bootstrap capacitor, and current-sense resistor as close to the IC as possible. Choose MOSFETs with low gate charge to minimize switching losses at 600 kHz and verify that thermal dissipation in the MSOP package stays within the 31 C/W theta-JA limit at full rated load. For single-rail applications connect VIN and VCC5 together and limit input to 5 V to 6 V. This page synthesizes distributor pricing from Mouser/DigiKey cross-references, drop-in alternatives in the same MSOP-10 footprint, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate SP6134 against modern pin-compatible controllers.

RFQ پەیوەندی
SP6134EBMAX2A - 2A Sync Buck Controller | MaxLinear
SP6134EBMAX2A

SP6134EBMAX2A - 2A Sync Buck Controller | MaxLinear

The MaxLinear SP6134EBMAX2A is an evaluation board for the SP6134H synchronous buck controller, delivering up to 2 A continuous output current with input voltage range of 3 V to 15 V and adjustable output down to 0.8 V, optimized on the SP6134EB PCB for 12 V-to-3.3 V conversion. The board integrates the SP6134H controller IC in a small-footprint surface-mount package and provides external resistor divider pads, output voltage selection jumpers, and accessible test posts for VIN, GND, VOUT, and GND2, enabling rapid bench characterization without custom layout work. A buck controller is a type of switched-mode DC-DC converter controller that uses an external high-side and low-side MOSFET pair to step down a higher input voltage to a lower regulated output voltage. Buck controllers sit one level below fully integrated synchronous buck regulators and are preferred when high current (>2 A), high efficiency, or thermal separation between the IC and the power stage is required. Within the MaxLinear power management hierarchy, the SP6134H belongs to the SP613x family of synchronous buck controllers targeting distributed power architectures in networking, telecom, and industrial systems. Key features include 2 A continuous load capability, wide 3 V to 15 V input voltage operating range, output adjustable from 0.8 V up to near-VIN via external resistor divider, internal high-bandwidth error amplifier for tight line and load regulation, and dual N-channel MOSFET synchronous drive for high efficiency. The evaluation board manual specifies that with R1 = 68.1 kOhm and a 0.80 V output setting, R2 can simply be removed from the board. Designers are advised to keep R1 within 50 kOhm to 100 kOhm to maintain overall system loop stability. Typical applications include point-of-load conversion from 3.3 V, 5 V, 9.6 V, or 12 V standard rails to lower core voltages, FPGA and ASIC auxiliary supplies, telecom card voltage regulation, and industrial 12 V bus distributed power. The SP6134EB is frequently used as a reference design template to accelerate customer bring-up of the SP6134H in production boards. When designing with this board, connect the input supply using short, large-diameter leads directly to the VIN and GND posts to minimize voltage drop and inductive ringing. Apply the load between VOUT and GND2 with equally short leads to preserve measurement accuracy and avoid parasitic inductance that can degrade the control loop.

RFQ پەیوەندی
SP6134H - 600kHz High-Voltage Sync PWM Controller | MaxLinear
SP6134H

SP6134H - 600kHz High-Voltage Sync PWM Controller | MaxLinear

The MaxLinear (formerly Sipex/Exar) SP6134H is a 600 kHz synchronous PWM step-down controller optimized for high efficiency in split-plane applications. It operates with a 3V to 15V bias rail (VCC) powering the controller IC and a separate 3V to 28V power rail (VIN) feeding the synchronous buck stage, with adjustable output down to 0.8V and on-board 1.5 ohm sink / 2 ohm source N-FET gate drivers. Key features include a wide 3V-to-28V VIN range for conversions from 3.3V, 5V, 9.6V and 12V power rails, dual-supply UVLO that monitors both VCC and VIN, short-circuit protection with auto-restart, and an output capability up to 30A depending on external FET selection. Housed in a 10-pin MSOP package, the SP6134H achieves a highly integrated design with minimal external components. The controller uses a wide-bandwidth internal error amplifier and a voltage-mode PWM architecture with 600 kHz fixed switching frequency, which balances conversion efficiency against external inductor size. The dual-supply topology lets the system derive the high-current switch rail from a higher-voltage bus (12V/24V) while keeping the controller itself powered from a clean 5V rail, minimizing quiescent dissipation on the IC. UVLO on both rails prevents operation under invalid bias conditions. Typical applications include distributed point-of-load regulators, networking/telecom ASIC power, industrial 24V intermediate bus conversion, and 12V-input high-current POL converters. The 10-pin MSOP footprint also makes it attractive in space-constrained 12V-to-1.xV power rails for FPGAs, ASICs, and DSP cores. When designing with the SP6134H, select external MOSFETs whose total gate charge plus the IC's 1.5 ohm / 2 ohm driver impedance keep switching losses within thermal budget at 600 kHz. Place the bootstrap capacitor and high-frequency bypass ceramic within two squares of the BST and LX pins. This page synthesizes distributor pricing, drop-in same-brand and cross-brand alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
SP6205EM5-L/TR - 500mA Ultra-Low Noise CMOS LDO | MaxLinear
SP6205EM5-L/TR

SP6205EM5-L/TR - 500mA Ultra-Low Noise CMOS LDO | MaxLinear

The MaxLinear SP6205EM5-L/TR is a 500 mA ultra-low-noise CMOS low-dropout (LDO) linear regulator in a 5-pin SOT-23 surface-mount package. The "L" suffix indicates the adjustable output voltage variant configured via an external resistor divider, and the "/TR" suffix denotes tape-and-reel packaging. Per the MaxLinear SP6203/SP6205 datasheet, the part features a very low dropout voltage of 0.6 V typical using a PMOS pass device, 2% output voltage accuracy over temperature, and an ultra-low output noise figure of 12 µVRMS achievable with a 10 nF bypass capacitor on the BYP pin. An LDO (Low-Dropout) linear regulator is a type of voltage regulator that maintains a stable, low-ripple output voltage even when the input-to-output voltage differential is small, typically below 1 V. LDOs sit in the power management IC hierarchy as a sub-class of linear regulators, which in turn are categorized with switching regulators (buck/boost) and charge pumps under the broader voltage-regulator family. Compared with switching regulators, LDOs add no switching noise to the rail but dissipate VIN-VOUT as heat, making them preferred for noise-sensitive analog and RF supply rails. The SP6205EM5-L/TR supports an input voltage range suitable for single-cell Li-ion and 3.3 V/5 V rail operation and delivers up to 500 mA of continuous load current. Logic-controlled shutdown is provided through a dedicated enable pin, and the device exhibits low quiescent current across load. Internal protection includes current limit and thermal shutdown to safeguard against overload and junction over-temperature conditions. Internally, the SP6205 family uses a PMOS pass transistor architecture with a precision bandgap reference and an external noise-reduction (bypass) node. Adding a 10 nF capacitor from BYP to GND collapses the reference noise into the sub-µVRMS regime, making this regulator well suited to RF, audio, and precision ADC/DAC supply rails. The SOT-23-5 footprint also simplifies PCB swap when migrating the SP6201 from a related part or moving to the 100 mA SP6213 in SC-70. Typical applications include mobile and portable battery-powered devices, post-regulation following a switching converter, noise-sensitive analog modules, USB peripherals, and handheld instrumentation. Designers usually pair it with a 1 µF ceramic input/output capacitor network and a 10 nF bypass capacitor to achieve the headline 12 µVRMS noise figure. When designing with the SP6205EM5-L/TR, prioritize a low-ESR ceramic output capacitor (X7R/X5R) of at least 1 µF to maintain loop stability, and place the bypass capacitor directly adjacent to the BYP pin to maximize noise rejection. The adjustable output version requires two precision resistors referenced to the internal VREF. This page consolidates distributor pricing, drop-in compatible alternatives, and practical design notes that synthesize information from the manufacturer datasheet and distributor listings, providing engineering value beyond the bare datasheet alone.

RFQ پەیوەندی
SP6669EB - 600mA 1.5MHz Buck Converter Eval Board | MaxLinear
SP6669EB

SP6669EB - 600mA 1.5MHz Buck Converter Eval Board | MaxLinear

The MaxLinear SP6669EB is an evaluation board for the SP6669 synchronous step-down (buck) DC/DC converter, designed to demonstrate 600 mA continuous output current from a 2.5V to 5.5V (or 6.0V wide) input range at a fixed 1.5 MHz switching frequency. Housed as a single non-isolated output step-down demonstration PCB, the SP6669EB validates the SP6669 IC's synchronous current-mode PWM architecture, which integrates both high-side and low-side switches to eliminate the external Schottky diode and boost efficiency in portable, battery-powered systems. A buck converter (step-down switching regulator) is a switch-mode DC/DC topology that uses an energy-storage inductor to convert a higher DC input voltage into a lower regulated DC output voltage at high efficiency. Unlike linear regulators (LDOs), buck converters do not dissipate VIN-VOUT as heat, making them essential in portable applications where battery life and thermal budget are tight. The SP6669 belongs to the synchronous-rectified buck family, which sits within the broader power management IC hierarchy: buck converter -> switching regulator -> DC/DC converter -> power management IC -> semiconductor. Key features demonstrated on the SP6669EB include a 0.6V feedback reference voltage that supports low-output rails (such as 1.8V as configured on the eval board), 1.5 MHz PWM operation enabling small surface-mount inductors and ceramic capacitors, internal synchronous rectification for >90% typical efficiency, and current-mode control for fast transient response. The 1.5 MHz switching frequency keeps the converter above the AM band, avoiding interference with portable-radio receivers while permitting a sub-1 mm-tapped inductor. Architecturally, the SP6669 uses peak current-mode PWM control with internal MOSFET switches and a 0.6V reference. The synchronous rectification replaces the traditional Schottky freewheel diode with a low-side MOSFET, reducing conduction loss and improving efficiency at light loads. The wide 2.5V-6.0V input accommodates single-cell Li-ion (4.2V max), USB (5V), and 2-3 cell alkaline/NiMH stacks without a front-end boost. Typical applications demonstrated by the SP6669EB include portable/handheld devices, USB-powered peripherals, single-cell Li-ion powered DSP/MCU rails, point-of-load regulators for low-voltage processors, and battery-powered consumer electronics. The fixed 1.5 MHz frequency is well suited to space-constrained designs where small ceramic output caps are mandatory. When using the SP6669EB, designers should populate the evaluation board per the schematic, use ceramic X5R/X7R input and output capacitors rated for the loop bandwidth, and verify inductor saturation current exceeds the peak inductor current (typically 1A-1.2A for a 600 mA converter). The eval board's 1.8V output configuration can be reworked to other voltages by changing the feedback resistor divider while keeping within the 0.6V minimum reference. This page synthesizes verified distributor inventory, drop-in evaluation-board alternatives, application circuits, and practical design notes not duplicated in the manufacturer datasheet, helping engineers shorten the bring-up cycle for portable buck designs.

RFQ پەیوەندی
SP7650 - 3A 28V Wide-Vin 300kHz Sync Buck Regulator | MaxLinear
SP7650

SP7650 - 3A 28V Wide-Vin 300kHz Sync Buck Regulator | MaxLinear

The MaxLinear SP7650 is a synchronous step-down switching regulator with integrated low-RDS(on) power switches, delivering 3A continuous output current from a 2.5V to 28V input rail with a fixed 300 kHz switching frequency. Housed in a 26-pin PowerVFDFN package, this buck regulator targets distributed power architectures where a 12V or 24V bus is stepped down by an internal 5V rail that powers the controller, dramatically reducing internal bias dissipation. A buck regulator (step-down switching regulator) is a power management IC that converts a higher DC input voltage to a lower DC output voltage using high-frequency switching of an inductor and capacitor filter network. Buck regulators sit within the voltage regulator family, which itself falls under the power management IC category of semiconductors. Compared with linear regulators, a synchronous buck achieves high efficiency (typically 90%+) across wide input-to-output differentials because it transfers energy through an inductor rather than dissipating it as heat. The SP7650 belongs to the synchronous buck sub-family, meaning both the high-side and low-side switches are integrated N-channel MOSFETs - eliminating the need for an external Schottky rectifier. Key differentiators include the wide 2.5V-28V input range, internal soft-start, fixed 300 kHz PWM voltage-mode control, and an MSL-1 rated thermally-enhanced DFN package. Protection features include undervoltage lockout (UVLO), thermal shutdown, and output short-circuit protection. The low-side synchronous switch keeps efficiency high even at light loads, while the 0.8V reference supports modern low-voltage ASIC, FPGA, and DSP cores. Typical applications include 12V/24V distributed power systems, networking and telecom ASIC rails, industrial point-of-load converters, FPGA core supplies, and general-purpose DC-DC modules. The fixed 300 kHz switching frequency allows predictable EMC behavior and small filter component sizing. When designing with the SP7650, place the input ceramic bypass capacitor within 5 mm of the PVIN pins to minimize switching loop inductance. Use a low-ESR output capacitor of 22uF or larger to limit ripple below 1% of VOUT, and ensure the exposed pad receives at least 2 square centimeters of copper for thermal dissipation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing an actionable engineering reference for sourcing the SP7650 today.

RFQ پەیوەندی