بەرهەمەکان (730+)

UCC23513BQDWYRQ1 - 4.5A/5.3A Auto Isolated Gate Driver SOIC-6 | TI
UCC23513BQDWYRQ1

UCC23513BQDWYRQ1 - 4.5A/5.3A Auto Isolated Gate Driver SOIC-6 | TI

The Texas Instruments UCC23513BQDWYRQ1 is an automotive-qualified (AEC-Q100) opto-compatible, single-channel reinforced isolated gate driver housed in a 6-pin SOIC package (DWY). It delivers 4.5 A peak source current and 5.3 A peak sink current, with a 5.7 kV RMS reinforced isolation rating that meets the requirements of IEC 60747-17 reinforced isolation standards. The driver operates from a wide 9.5 V to 33 V supply range, making it suitable for IGBT, power MOSFET, and SiC MOSFET gate drive applications. An isolated gate driver is a critical component in power electronics, providing galvanic isolation between low-voltage control logic and high-voltage power switching devices. Gate drivers fall within the broader category of power management and driver ICs, serving as the interface between microcontrollers, DSPs, or gate-driver controllers and the high-current gates of IGBTs, MOSFETs, and SiC FETs. The UCC23513BQDWYRQ1 uses TI's proprietary capacitive isolation technology to achieve 5.7 kV RMS reinforced isolation with low propagation delay and high common-mode transient immunity, making it functionally pin-compatible with traditional opto-isolated gate drivers while delivering superior reliability and temperature performance. Key features include 4.5 A source / 5.3 A sink peak output current, 105 ns typical propagation delay, 35 ns part-to-part delay matching, 100 kV/us minimum common-mode transient immunity (CMTI), and 8 mm creepage/clearance package design. The device supports bipolar supply operation for driving IGBTs and SiC FETs requiring negative gate drive voltage. Its UVLO threshold of 8 V (typical) protects power switches against insufficient drive voltage. The wide operating temperature range of -40°C to +125°C suits automotive under-hood and industrial environments. Typical applications include automotive traction inverters, on-board chargers (OBC), DC fast charging stations, industrial motor drives, solar inverters, and server/telecom power supplies. Its opto-compatible input stage allows direct replacement of HCPL-3120-style optocouplers in existing designs without PCB changes, simplifying upgrades from older discrete isolator solutions to modern integrated gate drivers. When designing with this part, ensure that the local VCC bypass capacitance (typically 1 uF to 10 uF ceramic) is placed within 2 mm of the VCC pin. Account for the bootstrap supply current in high-side configurations, and never exceed the 33 V absolute maximum VCC rating. The driver's input is current-driven like an optocoupler, requiring the designer's choice of input LED current-limiting resistor. This page synthesizes distributor inventory, AEC-Q100 grade variants, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers select the right isolated gate driver for automotive and industrial applications.

RFQ پەیوەندی
UCC23513DWY - 4.5A/5.3A 5.7kVrms Isolated Gate Driver | TI
UCC23513DWY

UCC23513DWY - 4.5A/5.3A 5.7kVrms Isolated Gate Driver | TI

The Texas Instruments UCC23513DWY is a single-channel opto-compatible reinforced isolated gate driver delivering 4.5 A source and 5.3 A sink peak output current with 5.7 kVrms reinforced isolation, housed in a 6-pin SOIC (DWY) package with wide-body creepage. It is a pin-to-pin, drop-in upgrade for traditional opto-isolated gate drivers, replacing optocoupler-based designs with TI's capacitive isolation technology to eliminate aging-related CTR degradation. An isolated gate driver is a galvanically isolated amplifier that translates a low-voltage control logic signal (typically 3.3 V or 5 V from a microcontroller or DSP) into a high-current drive signal capable of switching a power semiconductor such as an IGBT, SiC MOSFET, or GaN FET. In the broader taxonomy, isolated gate drivers belong to the power management category between gate driver ICs and isolators, and the UCC23513 specifically combines both functions in a single package, providing reinforced isolation per IEC 60747-17 (certification to be confirmed) while driving the gates of high-voltage power devices in switch-mode power supplies and motor drives. Key features include a maximum 33 V output driver supply voltage, 8 V or 12 V VCC UVLO options, rail-to-rail output swing, 105 ns maximum propagation delay, 25 ns maximum part-to-part delay matching, 35 ns maximum pulse-width distortion, and 150 kV/µs minimum common-mode transient immunity (CMTI). The single-channel 6-SOIC package provides minimum 8.5 mm creepage and clearance suitable for reinforced isolation in industrial and renewable energy systems. The device uses TI's proprietary capacitive coupling isolation technology, replacing the LED/photodiode chain used in optocouplers. Compared to optocouplers, the UCC23513 offers superior temperature stability (no CTR drift over temperature or aging), lower propagation delay variation, and higher CMTI. The integrated 8 V or 12 V VCC UVLO with hysteresis protects SiC and IGBT power devices from partial-turn-on during startup. Typical applications include driving IGBTs in industrial motor drives, driving SiC MOSFETs in EV traction inverters and solar inverters, driving GaN FETs in telecom and server power, and replacing legacy optocoupler gate drivers in welding inverters and UPS systems. The wide VCC range supports both standard 15 V and emerging 12 V SiC/IGBT gate drive rails. When designing with the UCC23513DWY, place the VCC bypass capacitor directly at pins 5-6 with a 1 µF X7R ceramic or larger to handle peak gate charge currents. The driver side does not require isolated DC/DC bias - only a single VCC supply per channel is needed for the output stage; input side is powered directly from the controller side supply. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes drawn from TI's UCC23513 datasheet and reference designs, providing engineering context not duplicated in the manufacturer documentation alone.

RFQ پەیوەندی
UCC27322DGN/DGNR - 9A Single LS MOSFET Driver w/ Enable | TI
UCC27322DGN+UCC27322DGNR

UCC27322DGN/DGNR - 9A Single LS MOSFET Driver w/ Enable | TI

The Texas Instruments UCC27322DGN/DGNR is a single-channel, 9 A peak low-side gate driver with split outputs and an active-high enable, offered in an 8-pin HVSSOP PowerPAD (DGN) package with an exposed thermal pad. It delivers 9 A source and 9 A sink drive current from a 4 V to 15 V supply, and uses TI's TrueDrive bipolar-CMOS output architecture to hold up at the Miller plateau of a power MOSFET. The DGN suffix denotes the tube-packed HVSSOP EP variant, while the DGNR suffix is the same die in a tape-and-reel packaging option. Typical rise/fall times of 20 ns into 1.8 nF load make it well suited to fast-switching power topologies. A low-side gate driver is a specialized power management IC that translates a low-current logic-level PWM signal from a controller into the high-current gate drive required to switch a power MOSFET or IGBT on the low side of a switching converter. In the broader power-converter hierarchy, gate drivers sit between the controller (PWM, digital, or analog) and the power stage, conditioning timing, level shifting, and providing the brief but large gate-charge currents (often several amps) needed to cross the Miller plateau quickly and minimize switching loss. Key differentiating features include the TrueDrive hybrid bipolar/CMOS output stage, which combines the current-handling of bipolar transistors with the rail-to-rail swing of CMOS, eliminating the need for an external bootstrap diode on the low side and improving efficiency at high switching frequencies. The split OUTH/OUTL outputs let the designer tune turn-on and turn-off strength independently with separate gate resistors, while the dedicated enable pin supports synchronised start-up and fault management. TTL/CMOS-compatible input thresholds and 4 V UVLO behaviour make the device drop-in compatible with 3.3 V and 5 V digital controllers. Typical applications include isolated and non-isolated DC-DC converters (synchronous buck, boost, half-bridge drivers via two devices), solar micro-inverters and string inverters, motor-drive gate-driver stages, and Class-D audio amplifiers. The combination of high peak current and tight 20 ns propagation delay also suits high-frequency power designs where switching losses dominate efficiency calculations. A practical design consideration: route the gate-drive loop (driver OUT to gate to source back to driver GND) as a tight, low-inductance path. Place the IC's thermal pad on at least 1 cm² of copper pour, and keep the OUTH/OUTL traces short to limit ringing. This page synthesises distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
UCC27322DGNR - 9A Single Low-Side MOSFET Driver | Texas Instruments
UCC27322DGNR

UCC27322DGNR - 9A Single Low-Side MOSFET Driver | Texas Instruments

The Texas Instruments UCC27322DGNR is a single-channel, 9 A high-speed low-side gate driver with a non-inverting logic input, an enable pin, and split (separate source and sink) output stages, packaged in an 8-pin HVSSOP (DGN) PowerPAD package with thermal pad. Background knowledge: a low-side gate driver is a power-management IC that switches the gate of an N-channel MOSFET (or IGBT) between the source/ground rail and the gate-drive voltage. By sourcing and sinking high peak current into the gate capacitance, it dramatically reduces the Miller-plateau transition time versus driving the MOSFET directly from a logic output. Within the broader taxonomy, low-side gate drivers fall under gate-driver ICs -> MOSFET/IGBT drivers -> power management ICs -> semiconductors. The UCC27322 family specifically targets sub-20 V rails where a true low-side (ground-referenced) topology is acceptable. Key features include 9 A peak source and 9 A peak sink current using TI's TrueDrive mixed Bipolar/CMOS output stage, TTL/CMOS-compatible logic inputs, 4 V to 15 V VDD supply range, 20 ns typical rise/fall times into a 1.8 nF load, and an enable pin for sequential power-up. The split OUTH/OUTL pins allow independent tuning of turn-on and turn-off gate resistors - useful for EMI control and ringing management. The architecture uses TI's TrueDrive topology, which combines bipolar drive transistors with CMOS bias circuitry to deliver high peak current while avoiding the shoot-through losses of pure CMOS drivers. Internal hysteresis on the EN pin rejects false triggers from slow-rising MCU signals. Typical applications include switch-mode power supplies (synchronous-rectifier and primary-side MOSFET drive), motor-drive half-bridges for the low-side switch, solenoid and piezo-actuator drivers, and Class-D audio amplifier output stages. The wide supply range also makes it suitable for 12 V industrial systems. Design consideration: keep the gate-driver within 1 cm of the MOSFET gate pad to minimize parasitic loop inductance - high di/dt at 9 A peak can otherwise ring above the MOSFET VGS rating. Use independent turn-on and turn-off resistors on OUTH and OUTL for EMI tuning. This page synthesizes distributor pricing, verified drop-in alternatives from the UCC2732x/UCC3732x family, and practical PCB-layout design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
UCC27511A - 4A/8A Low-Side Gate Driver | Texas Instruments
UCC27511A

UCC27511A - 4A/8A Low-Side Gate Driver | Texas Instruments

The Texas Instruments UCC27511A is a single-channel, high-speed low-side gate driver designed to drive MOSFETs, IGBTs, and emerging wide bandgap power devices such as GaN. It delivers 4-A peak source and 8-A peak sink currents, with a propagation delay of only 13 ns, making it suitable for high-frequency switching applications. The device operates from a 4.5-V to 18-V supply and features split outputs (OUTH and OUTL) for independent turn-on and turn-off control, as well as an enable pin with 5-V input handling capability. A low-side gate driver is a type of power management IC that amplifies control signals from a controller to efficiently switch a ground-referenced power transistor. It sits between the PWM controller and the gate of a MOSFET or IGBT, providing the high peak currents needed to charge and discharge the gate capacitance quickly. This reduces switching losses and improves efficiency in power converters. The UCC27511A belongs to the gate driver family, which is a subset of power management ICs essential for modern power electronics. Key features include a 13-ns propagation delay, 4-A source and 8-A sink peak currents, and a 5-V UVLO (undervoltage lockout) with hysteresis. The split outputs allow independent control of rise and fall times, enabling designers to optimize switching performance and reduce EMI. The device also features a robust design that minimizes shoot-through current, enhancing reliability in noisy environments. Technically, the UCC27511A uses a CMOS-based architecture that provides rail-to-rail output swing and high noise immunity. The input stage can handle 5-V logic signals directly, simplifying interface with microcontrollers and PWM controllers. The device is available in a SOT-23-6 package, which is compact and suitable for space-constrained designs. Typical applications include switch-mode power supplies, DC-to-DC converters, and companion gate-driver circuits for power modules. Its high-speed performance makes it ideal for synchronous rectification, active clamping, and other high-frequency topologies. When designing with the UCC27511A, ensure proper decoupling of the VDD pin with a 1-uF ceramic capacitor placed close to the device. The split outputs allow tuning of gate drive strength; use separate resistors on OUTH and OUTL to adjust rise and fall times independently.

RFQ پەیوەندی
UCC27517ADBVT - 4A/4A Single Low-Side Gate Driver | TI
UCC27517ADBVT

UCC27517ADBVT - 4A/4A Single Low-Side Gate Driver | TI

The Texas Instruments UCC27517ADBVT is a single-channel, high-speed low-side gate driver IC delivering 4 A peak source and 4 A peak sink current in a 5-pin SOT-23 (DBV) package. It operates from a wide 4.5 V to 18 V VDD range with 5 V undervoltage lockout (UVLO) and handles negative input voltages down to -5 V at the IN/IN- pins, allowing reliable operation in noisy switching environments. A gate driver is a power-management IC that sits between a low-power controller (MCU, FPGA, analog PWM) and a high-power switching device (MOSFET, IGBT, GaN FET). Its job is to translate a logic-level command into a high-current drive signal that can rapidly charge and discharge the gate capacitance of the power switch. Within the broader hierarchy, the UCC27517ADBVT belongs to the gate-driver IC family, which sits under power management -> MOSFET/IGBT drivers -> low-side drivers -> single-channel drivers. Low-side drivers are the simplest and most common configuration; they switch the low-side FET in a half-bridge or a single-switch power topology. Key features of the UCC27517ADBVT include TTL/CMOS-compatible logic inputs that are independent of VDD, 13 ns typical propagation delay, 9 ns rise and 8 ns fall times into a 1 nF load, and a dual-input structure with one inverting and one non-inverting input (INA, INB) that can be tied together for a single-input configuration. The device is rated for operation across -40 C to +125 C and is qualified to 4 kV HBM ESD. Architecturally, the UCC27517ADBVT uses a paralleled output stage that sources and sinks high peak currents, holding shoot-through current low by design. The wide hysteresis between the high and low input thresholds gives excellent noise immunity, and the fixed (VDD-independent) input thresholds allow the same logic family to drive the gate from a controller powered by a different rail. Typical applications include driving MOSFETs and IGBTs in switch-mode power supplies, motor drive H-bridge low-side switches, Class-D audio amplifier output stages, and synchronous-rectifier FETs in DC-DC converters. Designers often choose this part when they need a compact, robust low-side driver that replaces discrete NPN/PNP totem-pole circuits. When designing with this part, place a 0.1 uF VDD bypass capacitor as close to pin 5 as possible and use a wider trace (>=20 mil) on the OUT pin to handle the 4 A peak pulses. Because the device can handle negative inputs, no extra input-protection diodes are needed in most bridge applications.

RFQ پەیوەندی
UCC27517AQDBVRQ1 - 4A/4A Automotive Low-Side Gate Driver | TI
UCC27517AQDBVRQ1

UCC27517AQDBVRQ1 - 4A/4A Automotive Low-Side Gate Driver | TI

The Texas Instruments UCC27517AQDBVRQ1 is an AEC-Q100 qualified single-channel high-speed low-side gate driver delivering 4-A peak source and 4-A peak sink current, with a VDD supply range up to 20 V and 4-V UVLO, housed in a 5-pin SOT-23-5 (DBV) package. A low-side gate driver is a power management IC that sits between a PWM controller or microcontroller and the gate of a MOSFET or IGBT, amplifying weak logic signals into the high peak currents needed to charge and discharge gate capacitance rapidly. Within the power electronics hierarchy, gate drivers form the critical interface layer of the power stage, directly controlling switching speed, efficiency, and EMI behavior of the power semiconductor. Key features include the 4-A/4-A peak drive capability that minimizes switching losses in large FETs, a dual-input structure (IN+ and IN-/EN) that lets designers configure inverting or non-inverting operation, negative input voltage capability on the IN- pin, and rail-to-rail output swing. The fast propagation delay of this family enables high-frequency switching converters. Architecturally, the UCC27517A-Q1 uses a design that inherently minimizes shoot-through current, allowing it to source and sink high peak currents into capacitive loads efficiently. The 4-V UVLO (per TI product page) ensures the output stays low until VDD is high enough to fully enhance the power switch, protecting MOSFETs from operating in the resistive region during startup. Typical applications include automotive power-factor-correction stages, synchronous buck and boost converters, solar microinverters, motor-drive half-bridge legs, and LED drivers where MOSFETs or IGBTs require fast, robust gate drive with automotive reliability. When designing with this part, place a low-ESR 0.1-uF ceramic capacitor directly at VDD and use a separate gate-return trace to minimize parasitic inductance in the gate loop. The dual-input pins allow polarity selection without extra inverters. This page synthesizes distributor listings, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
UCC27524AQDRQ1 - Dual 5A Low-Side Gate Driver, AEC-Q100 | TI
UCC27524AQDRQ1

UCC27524AQDRQ1 - Dual 5A Low-Side Gate Driver, AEC-Q100 | TI

The Texas Instruments UCC27524AQDRQ1 is a dual-channel, high-speed, low-side gate driver IC delivering 5A source and 5A sink output current per channel, rated for VDD up to 20V, with 4V UVLO and direct -5V negative input voltage handling, housed in an 8-pin SOIC (D) surface-mount package qualified to AEC-Q100 for automotive use. A gate driver is a power management IC that bridges the low-voltage control domain (MCU or PWM controller outputs) and the high-power switching domain (MOSFET and IGBT gates). Within the hierarchy of power electronics, the low-side gate driver sits between the PWM controller and the power transistor, amplifying logic-level signals into high-peak-current gate pulses that charge and discharge the MOSFET gate capacitance quickly enough to minimize switching losses. The gate driver family therefore sits under power management ICs, alongside voltage regulators and motor drivers. Key features of the UCC27524AQDRQ1 include 5A/5A peak source/sink current, high-speed switching with fast rise and fall times suitable for high-frequency power converters, dual non-inverting channels with TTL/CMOS-compatible inputs, and tolerance of -5V directly on the input pins for robustness against switch-node ringing and negative spikes. According to the TI product page, the UCC27524A-Q1 is a variant of the UCC2752x family, adding negative input capability over the base UCC2752x parts. Architecturally, the device uses a bipolar/CMOS output stage that sinks current more strongly than it sources on the pulldown path, which helps hold the MOSFET gate low during Miller-plateau events and prevents dv/dt-induced turn-on. The dual-channel design drives two switches (for example, two paralleled FETs or two legs of a push-pull stage) from a single 8-pin IC, saving board space versus two single-channel drivers. Typical applications include automotive DC-DC converters, motor inverters, solar inverters, telecom and server power supplies, and class-D audio amplifier output stages - anywhere a PWM controller needs to switch MOSFETs or IGBTs at high frequency with low switching losses. A key design consideration: the SOIC-8 package's thermal and ground-path inductance limits practical peak performance, so placing the driver's ground pin and the MOSFET source on the same tight ground loop, with a local 0.1uF to 1uF VDD decoupling capacitor plus bulk capacitance, is essential to realize the full 5A peak current. This page synthesizes distributor pricing, drop-in alternatives, pinout data, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
UCC2773x-Q1 - 700V Half-Bridge Gate Driver | TI Automotive
UCC2773x-Q1

UCC2773x-Q1 - 700V Half-Bridge Gate Driver | TI Automotive

The UCC2773x-Q1 is a high-speed, automotive-grade 700V half-bridge gate driver from Texas Instruments, designed to drive power MOSFETs and IGBTs in half-bridge configurations. It provides 3.5A source and 4A sink current capability, enabling fast switching of high-power devices. The driver operates from a -40°C to +150°C temperature range and is AEC-Q100 qualified for automotive applications. A half-bridge gate driver is a specialized integrated circuit that provides the necessary voltage and current to switch the high-side and low-side transistors in a half-bridge topology. It is a critical component in power electronics, converting logic-level control signals into robust gate drive signals with proper level shifting and timing. The UCC2773x-Q1 integrates one ground-referenced channel (LO) and one floating channel (HO), which is designed to drive high-side transistors using a bootstrap supply. Key features include a fast 32ns typical propagation delay, well-matched delay between HO and LO channels (6ns max) for precise dead-time control, and up to 200V/ns noise immunity. The driver inputs are CMOS and TTL compatible, allowing easy interface with digital power controllers and analog controllers. Protection features hold outputs low when inputs are floating or when the minimum input pulse width is not met, preventing unintended switching. The UCC2773x-Q1 is available in various packages, including the 14-pin SOIC (D) package. Its high noise immunity and fast switching make it suitable for automotive applications such as on-board chargers, DC-DC converters, and traction inverters. The device is designed to operate reliably in harsh automotive environments, with a wide temperature range and robust protection features. Typical applications include automotive on-board chargers, DC-DC converters, and motor drives. The driver's high drive strength and fast propagation delay enable efficient switching, reducing switching losses and improving system efficiency. The bootstrap supply architecture simplifies the high-side drive circuit, reducing component count and board space. When designing with the UCC2773x-Q1, ensure proper bootstrap capacitor sizing and layout to maintain sufficient gate drive voltage for the high-side transistor. Also, consider the dead-time requirements of the application to prevent shoot-through current. The device's matched delays help achieve precise dead-time control, but external dead-time circuitry may be needed for optimal performance.

RFQ پەیوەندی
UCC28180 - 8-Pin CCM PFC Controller, 18-250 kHz | Texas Instruments
UCC28180

UCC28180 - 8-Pin CCM PFC Controller, 18-250 kHz | Texas Instruments

The Texas Instruments UCC28180 is an 8-pin active Power-Factor Correction (PFC) controller designed for continuous conduction mode (CCM) boost pre-regulators in AC-DC front-ends, with a programmable switching frequency range of 18 kHz to 250 kHz and housed in an 8-pin SOIC package. Key specifications per TI product documentation include CCM operation with input voltage support suitable for universal AC line (85 VAC to 265 VAC) and regulated DC output boost voltages typically targeting 390 V at 1 kW per the PMP22606 reference design. The device integrates a transconductance voltage amplifier for output voltage regulation, a current loop for sinusoidal line-current shaping, and programmable switching frequency set by an external resistor. A Power-Factor Correction (PFC) controller is the control IC that shapes the input current of an AC-DC converter to be in phase with the input voltage, raising the power factor toward unity and reducing harmonic distortion below regulatory limits (EN61000-3-2, JEITA-MITI). It sits in the system hierarchy as: PFC controller -> AC-DC converter -> offline power supply -> power management IC -> semiconductor. The UCC28180 family targets CCM boost topologies, which are favored for medium-to-high power (>300 W) because the continuous inductor current reduces peak ripple and improves EMI behavior versus critical-conduction-mode (CrM/BCM) alternatives. Key differentiating features include 8-pin minimum-footprint packaging for compact front-end designs, internal soft-start to limit inrush current, undervoltage lockout (UVLO), overvoltage protection (OVP), cycle-by-cycle current limiting, and a low-power standby mode. The device's transconductance error amplifier uses a standard type-II compensation network, simplifying loop stabilization. The low component count - TI emphasizes that the UCC28180 needs few external components - reduces BOM cost and PCB area versus legacy PFC controllers like the UC3854. Architecturally, the UCC28180 uses average current-mode control in CCM, with a multiplier that combines the rectified line voltage, feedforward input, and error-amplifier output to produce a sinusoidal current reference. The internal gate driver is sized to drive a discrete MOSFET or an optocoupler-isolated gate driver for bridgeless totem-pole PFC front-ends. The controller is paired with sense resistors or a current-transformer shunt for inductor-current feedback and supports both trailing-edge and leading-edge modulation per TI application notes. Typical applications include 1 kW universal-input telecom rectifiers, 800 W industrial SMPS pre-regulators, server and data-center ACDC front-ends, fan-cooled LED driver power-factor stages, and PFC front-ends for medical and test equipment. The UCC28180 is qualified per TI's standard commercial grade and is intended for systems targeting compliance with IEC 61000-3-2 harmonic-current limits. Designers should select switching frequency to balance switching loss (proportional to fsw) against inductor ripple (inversely proportional to fsw); 65 kHz to 100 kHz is typical for 1 kW designs. The TI PMP22606 reference design documents a 1 kW 390 V CCM PFC stage using the UCC28180 at a representative switching frequency and provides a working bill of materials, magnetics specification, and EMI filter values. This page synthesizes distributor pricing, available drop-in alternatives including same-package options from TI's UCC28xxx family, and practical CCM PFC design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
UCC5310MCDR - 4.3A Isolated Gate Driver, 3kVrms, SOIC-8 | Texas Instruments
UCC5310MCDR

UCC5310MCDR - 4.3A Isolated Gate Driver, 3kVrms, SOIC-8 | Texas Instruments

The Texas Instruments UCC5310MCDR is a single-channel isolated gate driver with 4.3 A source and 2.2 A sink drive capability, integrated Miller clamp, and 3 kVrms basic galvanic isolation, housed in an 8-pin SOIC (D) package. It is designed to drive power MOSFETs, IGBTs, SiC MOSFETs, and GaN FETs in compact, high-efficiency switching power stages. An isolated gate driver is a device that provides both signal-level galvanic isolation and high-current buffering between a low-voltage PWM controller and the gate of a high-voltage power transistor. Within the broader system hierarchy, an isolated gate driver sits between the control logic (microcontroller, DSP, or PWM controller) and the power stage (MOSFET, IGBT, SiC, GaN), enabling safe control of high-voltage rails in motor drives, solar inverters, and industrial power supplies. Key features of the UCC5310MCDR include 4.3 A peak source / 2.2 A peak sink output current, a Miller clamp transistor internal to the package that prevents unwanted parasitic turn-on of the driven FET during high dV/dt switching transients, an input-side undervoltage lockout (UVLO) at approximately 12 V referenced to the IGBT emitter, and up to 30 V VDD driver supply with 15 V VCC input range. The 3 kVrms isolation rating supports basic-grade functional isolation in industrial environments. The device uses TI's capacitive-coupling isolation technology to transmit the PWM signal across the isolation barrier while rejecting common-mode transients typical of fast-switching power stages. The internal Miller clamp is rated to handle negative 5 V transients on the gate node, improving robustness in half-bridge configurations with long gate-drive loops. Typical applications include IGBT/SiC MOSFET gate drive for solar string inverters, three-phase motor drive inverter stages, isolated DC-DC converter primary-side FET drive, industrial servo drives, and HEV/EV traction inverter auxiliary stages. The combination of integrated Miller clamp and 4.3 A drive strength is particularly valuable when driving large-module IGBTs or paralleled SiC MOSFETs where parasitic turn-on would otherwise cause shoot-through. When designing with this device, place the driver physically close to the driven power transistor to minimize gate-loop inductance. Use a local bootstrap or isolated supply for VDD, and provide adequate PCB copper for thermal dissipation (the SOIC-8 package has moderate thermal resistance). This page synthesizes distributor pricing, drop-in alternatives, comparison parameters, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
UCC5320 - 4.3A Isolated Gate Driver | Texas Instruments
UCC5320

UCC5320 - 4.3A Isolated Gate Driver | Texas Instruments

The Texas Instruments UCC5320 is a 4.3A single-channel isolated gate driver with 3-kVRMS or 5-kVRMS reinforced isolation, supporting MOSFET, IGBT, SiC MOSFET, and GaN FET switching in SOIC-8 (D) or wide-body SOIC-8 (DWV) packages. It features split output (UCC5320S variant) or emitter-referenced UVLO options for safe gate drive of power transistors in switching power supply and motor drive designs. A galvanically isolated gate driver is a gate drive circuit that uses an isolation barrier (capacitive or magnetic) to separate the low-voltage control domain (PWM logic, MCU) from the high-voltage power domain (MOSFET/IGBT gate). Isolation gate drivers sit in the power management IC hierarchy: isolated gate driver > gate driver > driver IC > power management IC. Their primary role is to break ground loops, provide level shifting, and protect low-voltage controllers from high-voltage transients propagated by rapidly switching power devices. The UCC5320 delivers up to 4.3A peak source and 4.5A peak sink gate drive current, with a wide drive supply range of 9.5V to 33V on the secondary side. The split output variant (UCC5320S) independently controls turn-on and turn-off currents, allowing designers to tailor switching loss and EMI. Internal undervoltage lockout referenced to GND2 ensures gate drive signals are only produced once the driver supply is healthy. The device is rated for -40C to +150C junction temperature. Architecturally, the UCC5320 uses TI's capacitive isolation technology to achieve 3-kVRMS (D package) or 5-kVRMS (DWV package) basic or reinforced isolation. The wide-body DWV package is intended for reinforced isolation per IEC 60747-17/VDE 0884-11. Internal common-mode transient immunity (CMTI) exceeds 100 kV/µs, ensuring reliable operation in noisy motor drive and Class-D audio amplifier environments. The basic isolation D variant shares the same pinout with the reinforced DWV variant, enabling PCB layout reuse between isolation grades. Typical applications include industrial motor drives (AC motor, BLDC, PMSM), photovoltaic string inverters, isolated DC-DC converters, EV traction inverters, and Class-D audio amplifiers. The split output variant is particularly valuable in motor drives where controlled dV/dt via gate resistance tuning is critical to manage EMI and switching loss. The wide 9.5V to 33V secondary supply range also allows direct drive of SiC MOSFETs requiring 18V gate drive. When designing with this device, ensure adequate decoupling on both primary (VDD1, 3V to 5.5V) and secondary (VDD2, 9.5V to 33V) supplies with 0.1 µF ceramic capacitors placed as close to the IC as possible. The split output (UCC5320S) needs separate turn-on and turn-off gate resistors if independent rise/fall time control is desired. Verify creepage and clearance on the PCB layout for the DWV package to achieve the rated 5-kVRMS reinforced isolation. This page synthesizes current distributor pricing, drop-in same-family alternatives, application circuit notes, and design considerations beyond the manufacturer datasheet, helping engineers select and source the right UCC5320 variant for their isolated gate drive needs.

RFQ پەیوەندی
UCC5350-Q1 - 10A Isolated Gate Driver | TI | SiC/IGBT/MOSFET
UCC5350-Q1

UCC5350-Q1 - 10A Isolated Gate Driver | TI | SiC/IGBT/MOSFET

The Texas Instruments UCC5350-Q1 is a single-channel, automotive-qualified isolated gate driver with 10 A source and 10 A sink typical peak output current, housed in an 8-pin SOIC (D) package with 3 kVRMS basic isolation. It is designed to drive power MOSFETs, IGBTs, and SiC MOSFETs in high-voltage traction inverter and on-board charger applications, and offers a hardware option for either an internal Miller clamp or split (separate source/sink) outputs. An isolated gate driver is a semiconductor device that translates low-voltage PWM control signals into a floating, high-voltage drive signal referenced to the gate of a power transistor. Isolated gate drivers sit in the signal chain between a low-voltage controller (MCU, DSP, or digital isolator) and the gate of a high-side or low-side power switch, and they form part of the broader power management hierarchy: gate driver -> driver IC -> isolated driver -> isolated power stage. Capacitive-isolation techniques, as in the UCC5350-Q1, replace optocouplers to deliver lower part-to-part skew, lower propagation delay, higher CMTI, and improved automotive temperature performance. Key features include 5 A minimum source/sink peak current (10 A typical), 3 kVRMS reinforced isolation, 100 V/ns minimum CMTI, propagation delay below 100 ns, and a 8 V to 18 V VDD drive supply range. The Miller-clamp variant integrates a low-impedance path that prevents parasitic turn-on during high dv/dt transients, while the split-output variant gives the gate-drive circuit independent control of turn-on and turn-off impedance for tunable EMI and switching loss. The device integrates a TI proprietary capacitive isolation barrier based on silicon-dioxide capacitors, achieving >30 year isolation barrier life and 5 kVRMS transient withstand. Input-to-output channel matching and minimal pulse-width distortion make the UCC53553 well suited to closed-loop current-control topologies such as field-oriented control (FOC) of traction inverters, where phase-edge timing accuracy directly impacts torque ripple and acoustic noise. Typical applications include EV traction inverters, on-board chargers (OBC), DC fast-charging station power modules, solar/string inverters, industrial motor drives, and server/telecom SMPS. AEC-Q100 Grade 1 qualification (–40C to +125C) and functional-safety-capable design files (TI documents FMEDA) make it well suited to ASIL-rated safety functions such as inverter over-current protection. When designing with the UCC5350-Q1, place a 1 uF VDD bypass capacitor within 2 mm of the IC and use a 4.7 uF to 10 uF bulk capacitor on the VCC supply. Add a gate-source resistor of 10 kohm to prevent floating-gate leakage during MCU reset, and follow PCB layout rules that keep the input-side and output-side grounds separate (single-point star ground at the isolation barrier). This page synthesizes distributor pricing, AEC-Q100-qualified same-package drop-in alternatives, and practical gate-drive design notes not found on stock distributor listings.

RFQ پەیوەندی
UCC5390ECD - 10A Isolated Gate Driver, 3kVrms, 8-SOIC | TI
UCC5390ECD

UCC5390ECD - 10A Isolated Gate Driver, 3kVrms, 8-SOIC | TI

The Texas Instruments UCC5390ECD is a single-channel, isolated gate driver rated for 10 A source and 10 A sink output current, with 3 kVrms basic isolation (5 kVrms option on the family), housed in an 8-pin SOIC (D) package. It is designed for high-performance MOSFETs, IGBTs, SiC MOSFETs, and GaN FETs in switching power topologies such as motor drives, solar inverters, and on-board EV chargers. An isolated gate driver is a critical power-management component that sits between a low-voltage control controller (microcontroller, FPGA, or DSP) and a high-voltage power transistor. It provides galvanic isolation for safety and ground-shift immunity, level-shifts logic-level PWM signals up to the gate-drive rail, and supplies the high peak currents needed to charge and discharge the transistor's input capacitance quickly. In the system hierarchy it belongs to the isolated gate driver family, which itself sits inside power-management ICs and high-voltage gate-driver subcategory. Key specifications include a 12 V under-voltage lockout (UVLO) on the output side with bipolar supply support, propagation delay in the tens of nanoseconds range, common-mode transient immunity (CMTI) above 100 kV/us, and TTL-compatible CMOS inputs with internal pull-up/pull-down. The output stage uses a pull-up/pull-down structure capable of sourcing/sinking 10 A peak to switch large MOSFET/IGBT/SiC devices at high dV/dt, and the device supports both unipolar and bipolar gate-drive rails. Internally, the UCC5390ECD uses TI's capacitive isolation technology combined with a high-current gate-drive output stage. The 12 V UVLO protects against partial turn-on of enhancement-mode power devices when the secondary supply is below the gate-threshold band, while the high CMTI prevents false triggering on noisy high-voltage nodes. Compared with optocoupler-based drivers, capacitive isolation eliminates LED aging effects and provides tighter timing accuracy. Typical applications include industrial motor drives (AC induction, BLDC, servo), solar inverters and string combiners, UPS and telecom rectifiers, on-board EV chargers and traction inverters, induction heating, and high-frequency DC-DC converters using SiC or GaN switches. The wide driver voltage range supports both 12 V and 15 V gate-rail designs. When designing with this part, observe the published layout guidelines: keep the input-side and output-side ground planes physically separated, place the bypass capacitors as close as possible to the VCC1/VCC2 pins, and ensure the creepage/clearance on the PCB meets the target isolation rating. The 8-SOIC package keeps the footprint small but provides only basic isolation, so reinforced isolation requires the wider-body DWV version. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
UCC5390ECDR - 10A Isolated Gate Driver, 3kVrms, SOIC-8 | TI
UCC5390ECDR

UCC5390ECDR - 10A Isolated Gate Driver, 3kVrms, SOIC-8 | TI

The Texas Instruments UCC5390ECDR is a single-channel isolated gate driver with 10A/10A source/sink drive capability, 3 kVRMS basic isolation, and a 12V UVLO option, housed in an 8-pin SOIC (D) package. It uses TI's capacitive coupling isolation technology to provide robust switching for high-performance MOSFETs, IGBTs, and SiC MOSFETs in demanding power-conversion applications. An isolated gate driver is a specialized driver IC that provides both galvanic isolation and high-current drive signals to the gate of a power semiconductor. It sits hierarchically between a low-voltage PWM controller (signal-level logic) and a high-voltage power switch (MOSFET/IGBT/SiC), combining the functions of an isolation barrier (replacing optocouplers or pulse transformers) and a high-peak-current gate driver. Without it, a logic-level MCU cannot safely or directly switch a high-current power FET that may switch hundreds of volts. Key features include 10A peak source and 10A peak sink output current, 3 kVRMS basic isolation rating per UL 1577, common-mode transient immunity (CMTI) of 100 kV/us minimum, and an 8-pin SOIC (D) footprint with 0.7 mm creepage. The split output stage (separate OUTH and OUTL pins) allows independent turn-on and turn-off strength tuning, and the device supports bipolar supply operation up to +18/-13 V for IGBT and SiC applications. The 12V UVLO references GND, while the part also carries safety certifications including UL 1577 and VDE 0884-11. The UCC5390 uses TI's integrated capacitive isolation barrier with on-chip modulation/demodulation, eliminating the current-driven optocoupler lifetime concerns of LED-based isolators. Its split output topology lets the designer add discrete source/sink resistors to optimize dV/dt and EMI, which is critical when driving SiC MOSFETs at >50 V/ns to keep switching losses low. Typical applications include solar string inverters, industrial motor drives, telecom and server power supplies, and EV onboard chargers. The 3 kVRMS rating suits 400V/600V/650V DC-link systems; the bipolar supply capability is critical for SiC MOSFETs that need a negative gate-off voltage to avoid spurious turn-on from high dV/dt. When designing with this part, treat creepage/clearance on the PCB as the primary safety constraint. Above 1.5 kVRMS the SOIC-8 needs at least 4 mm side-to-side trace spacing and the inner PCB layers must be routed away from the isolation barrier to meet IEC 62368-1 reinforced isolation reinforcement. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
UCC5880-Q1 - Isolated 20A Adjustable SiC/IGBT Gate Driver | TI
UCC5880-Q1

UCC5880-Q1 - Isolated 20A Adjustable SiC/IGBT Gate Driver | TI

The Texas Instruments UCC5880-Q1 is an isolated, highly configurable 20A adjustable drive-strength gate driver designed to drive high-power SiC MOSFETs and IGBTs in automotive EV/HEV applications. Housed in a 32-pin SSOP (DFC) package with 5000 Vrms capacitive isolation, the device delivers adjustable gate-drive strength, supports 2-channel operation, and integrates advanced protection functions including DESAT detection, shunt-resistor over-current, and over-temperature sensing via PTC, NTC, or diode inputs. What is an isolated gate driver? An isolated gate driver is a power-management interface IC that provides galvanic isolation between a low-voltage control domain (MCU, DSP, or FPGA) and a high-voltage power-transistor stage (IGBT, SiC MOSFET, or GaN FET). Compared with non-isolated gate drivers, isolated gate drivers - including the UCC5880-Q1 - use capacitive or magnetic barriers to block high-voltage transients, allowing the control circuit to float at a separate domain and enabling directly-referenced gate drive for high-side switching in half-bridge and full-bridge power stages. They sit in the broader hierarchy of gate driver IC -> power management IC -> semiconductor IC. The UCC5880-Q1's adjustable drive-strength feature lets the system engineer tune the gate-source current for the specific switching speed required, mitigating EMI and ringing without external gate resistors. Built-in protection includes programmable soft turn-off or two-level soft turn-off during DESAT and over-current faults, plus over-temperature shutdown, dramatically reducing the burden on the host MCU. Functional Safety-Compliant design and AEC-Q100 qualification make the UCC5880-Q1 attractive for traction inverters, onboard chargers, and DC-DC converters in xEV platforms. Internal 32-SSOP package, tight parameter specification, and TI's reference design TIDT356 (HybridPACK IGBT module driver) demonstrate mature field readiness. Typical applications include traction inverter power stages using SiC MOSFETs, EV onboard chargers, and industrial servo drives. The UCC5880-Q1 also serves in DC fast-charging station PFC stages, where galvanic isolation is mandated between control and power stages. Its high drive strength eliminates external buffer stages on 1200V-class SiC discrete modules, simplifying layout. Design tip: pair the UCC5880-Q1 with the TI LM5180-Q1 isolated bias supply to build a complete isolated gate-drive bias rail in the TIDT356 HybridPACK reference design. Adjust drive strength via SPI/registers to match the target MOSFET's Qg. This page synthesizes distributor availability, drop-in alternatives (notably the pin-to-pin-compatible UCC5881-Q1), and design notes beyond the TI datasheet, helping engineers choose validated second sources for automotive production ramps.

RFQ پەیوەندی
UCC5881-Q1 - 20A Isolated SiC/IGBT Gate Driver | Texas Instruments
UCC5881-Q1

UCC5881-Q1 - 20A Isolated SiC/IGBT Gate Driver | Texas Instruments

The Texas Instruments UCC5881-Q1 is an automotive-grade, isolated 20 A adjustable gate driver designed to drive high-power SiC MOSFETs and IGBTs in EV/HEV traction inverter applications. It integrates capacitive isolation rated at 5000 Vrms and is offered in a 32-pin SSOP (DFC) package with exposed thermal pad. The device provides real-time variable drive strength via an SPI-programmable interface, allowing designers to tune gate current profiles for each switching event. An isolated gate driver is a power-semiconductor interface IC that combines galvanic isolation with high-current gate drive capability, allowing a low-voltage controller to safely command a high-voltage power switch. Isolated gate drivers sit hierarchically between gate drivers and isolated power modules; in EV traction inverters they bridge the 12 V domain MCU and the 400 V or 800 V DC bus, enabling functional-safety-compliant drive of SiC MOSFETs and IGBTs at MHz-class switching frequencies. Key features include 14 selectable DESAT leading-edge blanking settings, 5 DESAT deglitch filter settings, and 16 DESAT threshold settings for configurable short-circuit protection. The device also integrates shunt-resistor-based over-current detection, over-temperature sensing (PTC, NTC, or diode), two-level soft turn-off during faults, an integrated 10-bit ADC, and ASIL-compliant diagnostics. Compared with the predecessor UCC5880-Q1, the UCC5881-Q1 adds more DESAT configurability and an INT_COMM fault filter while remaining pin-to-pin compatible. Technically, the UCC5881-Q1 uses TI's proprietary capacitive-isolation technology to deliver 5000 Vrms reinforced isolation. The 20 A adjustable drive strength reduces switching losses by up to 80 percent versus fixed-strength drivers, and the integrated ADC enables closed-loop temperature and current telemetry directly to the MCU. Typical applications include 400 V and 800 V EV traction inverters, onboard chargers, DC fast-charging stations, solar string inverters, and industrial motor drives. The configurable fault handling suits ASIL-D functional-safety designs. When designing with this device, ensure the gate-drive loop is minimized and the DESAT blanking time is tuned for the chosen SiC MOSFET's blanking requirements. The SPI interface must be isolated from the secondary high-voltage domain with a digital isolator. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet, providing engineering information for EV powertrain and renewable-energy power-conversion designers.

RFQ پەیوەندی
UCS2114-1-V/LX - Dual USB 3A Power Switch w/ Current Sense | Microchip
UCS2114-1-V/LX

UCS2114-1-V/LX - Dual USB 3A Power Switch w/ Current Sense | Microchip

The Microchip UCS2114-1-V/LX is a dual USB port power switch with integrated current sensing, delivering up to 3.0 A continuous (3.4 A maximum) per VBUS channel in a 20-pin VQFN (3x3 mm) package. It combines two high-side power switches, precision overcurrent limiting (OCL), port power-switch enables, auto-recovery fault handling, undervoltage/overvoltage protection, and an SMBus interface (default address 57h) for telemetry. The part is offered in tube packaging (denoted by the /LX suffix). A USB power switch is a high-side load switch that delivers the 5 V VBUS rail to downstream USB ports while protecting the upstream supply from fault conditions. The UCS2114 belongs to the power-distribution switch category, sitting between a 5 V regulator and the USB connectors; it is a specialized USB high-side switch with current monitoring, integrating a back-to-back N-channel MOSFET topology, an internal charge pump, and an 8-bit ADC accessible over SMBus for current and voltage read-back. Key features include 3.0 A continuous load current per channel, 3.4 A peak, programmable current-limit threshold, automatic retry after fault, dedicated FLG (fault) output, thermal shutdown, and 5.5 V absolute maximum input voltage. The VQFN-20 package (3x3 mm) provides a low-profile, thermally efficient footprint suitable for compact USB hub designs, docking stations, and embedded PC platforms where PCB real estate is at a premium. The integrated current sensor uses an internal sense FET with a calibrated gain, reported through the SMBus interface for system-level power budgeting. Compared with discrete solutions using an external current-sense amplifier, the UCS2114 saves board area, simplifies the BOM, and reduces calibration effort at production. This architecture is well suited to multi-port USB applications where per-port current telemetry is required by USB-IF Battery Charging v1.2 or proprietary charging protocols. Typical applications include USB 3.0/3.1 hubs, USB-C power-delivery accessory side controllers, docking stations, notebook and tablet charging ports, and embedded SBC platforms. The 3.4 A peak capability supports USB Battery Charging v1.2 CDP/DCP modes and standard downstream ports needing 5 V @ 2.4 A to 3.0 A. Designers should observe good input-bulk and bypass capacitor placement (per manufacturer guidance) and ensure the exposed thermal pad is soldered to a sufficient copper pour for sustained 3 A operation. Select the /LX suffix for tube packaging or /LX-T for tape-and-reel; both share the same silicon and pinout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ پەیوەندی
UDN2981A - 8-Ch Source Driver, 80V, -500mA | Allegro | DIP-18
UDN2981A

UDN2981A - 8-Ch Source Driver, 80V, -500mA | Allegro | DIP-18

The Allegro MicroSystems UDN2981A is an 8-channel source driver (high-side switch array) rated for load supply voltages up to 80 V and continuous output currents to -500 mA per channel, housed in a through-hole 18-pin DIP package. It is part of the Allegro UDN2981-UDN2984 bipolar source-driver family designed for high-side switching applications that benefit from separate logic and load grounds. What is a source driver? A source driver (high-side driver) is an integrated circuit that switches the positive supply rail to a load rather than the negative rail. It is the complement of a sink driver such as the ULN2803A, which switches loads to ground. Source drivers are essential when the load shares a common ground return with the controlling logic - for example, relays, solenoids, incandescent lamps, and common-cathode LED arrays - because sinking the load to ground would force the load's negative terminal to be the switched node, which is often physically or electrically impractical. Key features of the UDN2981A include eight independent DMOS/bipolar Darlington source outputs with built-in clamp diodes for inductive load protection, a logic supply range that interfaces directly with TTL and 5 V CMOS logic, a wide load supply voltage up to 80 V, and -500 mA continuous output current per channel. The device is recommended for high-side switching applications that benefit from separate logic and load grounds, making it well suited to interface low-level logic to high-current peripheral loads. Technically, the UDN2981A integrates eight high-voltage Darlington PNP/NPN source-driver stages with shared logic inputs. Each channel includes a flyback diode to ground for inductive load transient suppression. The device supports separate logic ground (pin 9) and load ground return paths, simplifying system wiring when the logic and load grounds are at different potentials. Typical applications include driving relays and solenoids, incandescent lamp displays, common-cathode LED arrays, unipolar stepper motor windings, and any high-side peripheral load driven by TTL/CMOS logic. The wide 80 V load supply makes the UDN2981A particularly useful in industrial 24 V and 48 V systems, as well as vintage telecom and PDP-style displays. When designing with the UDN2981A, place a 0.1 uF bypass capacitor on the logic VCC and a bulk capacitor on the load supply to handle inrush current. Ensure total package dissipation stays below the 18-DIP thermal rating by derating per-channel current when all eight outputs are simultaneously active. This page synthesizes distributor pricing, drop-in DMOS and bipolar alternatives, and practical design notes not found in the manufacturer datasheet alone.

RFQ پەیوەندی
UDN2982LW-T - 8-CH 500mA 80V Source Driver | Allegro | 20-SOIC
UDN2982LW-T

UDN2982LW-T - 8-CH 500mA 80V Source Driver | Allegro | 20-SOIC

Allegro MicroSystems' UDN2982LW-T is an 8-channel bipolar source driver capable of sinking up to -500 mA per channel and supporting load supply voltages to 80 V, packaged in a 20-pin wide-body SOIC (LW suffix). The device is recommended for high-side switching applications that benefit from separate logic and load grounds, providing a robust interface between low-level CMOS/TTL logic and high-current inductive or resistive loads such as relays, solenoids, lamps, stepper/servo motors, print hammers, and discrete LEDs. A source driver is an integrated power switch that pulls current from the load to the positive supply rail when activated by a logic-level input, complementing the more common sink driver that pulls the load to ground. Source drivers sit within the broader power management IC hierarchy under display drivers, lamp drivers, relay drivers, and peripheral/load drivers. Their typical role is to provide high-current, high-voltage buffering of low-power logic signals coming from a microcontroller or FPGA. Key specifications include eight independent open-collector Darlington-style outputs rated for -500 mA continuous per channel and a load supply (Vload or VM) ceiling of 50 V continuous / 80 V transient, allowing driving of 24 V and 48 V industrial bus loads directly. The logic supply operates from a typical 5 V rail, accepting TTL/CMOS inputs with integrated pull-down structures. Built-in output clamp diodes permit direct connection of inductive loads without external freewheeling hardware. The architecture combines eight monolithic NPN Darlington pairs, each with a series base resistor for direct TTL interfacing, plus a shared flyback/clamp network referenced to a dedicated load supply pin. This topology minimizes quiescent current while maintaining high gain (typically 2000 hFE), enabling the -500 mA sink rating with logic-level input drive. Typical applications include industrial relay and solenoid panels, multi-axis stepper/servo motor excitation, LED matrix or bar-graph displays, thermal printer hammer drivers, and 24 V-to-48 V industrial automation backplanes. Selecting the -T (tape and reel) variant of the LW package supports high-volume SMT assembly. When designing with the UDN2982LW-T, ensure the load supply decoupling uses a low-ESR bulk capacitor close to the Vload pin, since each channel can switch up to 500 mA. Inductive loads require verification of the internal clamp ratings against the worst-case E = 0.5 × L × I² energy, and output channels should not be paralleled without current-sharing analysis. This page consolidates distributor pricing, cross-brand drop-in alternates (UDQ2982LW, MIC2982BWM), and design notes drawn from the Allegro datasheet family. Information gain includes a parameter-by-parameter comparison against MIC2982BWM and sourcing guidance that pure distributor listings rarely surface.

RFQ پەیوەندی
UDN2987LW - 8-Channel Source Driver, 350mA, 35V | Allegro
UDN2987LW

UDN2987LW - 8-Channel Source Driver, 350mA, 35V | Allegro

The Allegro MicroSystems UDN2987LW is an 8-channel source driver with integrated over-current protection, rated for 350 mA per output and a sustaining voltage up to 35 V, housed in a 20-lead wide-body SOIC (SOICW-20) surface-mount package. As a power switch/driver IC, the UDN2987LW functions as a high-side driver that interfaces standard low-level logic (5 V TTL, Schottky TTL, DTL, PMOS, CMOS) with inductive loads such as relays, solenoids, motors, LEDs, and incandescent lamps. Each of its eight sourcing outputs incorporates over-current protection, and the device adds internal ground clamp diodes for inductive transient suppression plus thermal shutdown for fault resilience. Key features include 350 mA continuous source current per channel, 35 V sustaining output voltage, TTL/CMOS-compatible inputs with active-high switching, internal clamp diodes for inductive loads, per-channel over-current limiting, and thermal shutdown protection. The wide-body SOIC-20 footprint allows direct PCB mounting while providing adequate thermal headroom for sustained multi-channel operation in industrial cabinets. Built on Allegro's bipolar DABiC-5 (Dual Active Bus in CMOS) process, the UDN2987LW integrates eight high-side DMOS-like source transistors with bipolar control logic, delivering simultaneously low on-resistance, integrated protection, and the high-voltage capability required for 24 V industrial and 28 V automotive relay driver applications. Compared to discrete FET arrays plus external protection, this monolithic approach reduces BOM count, simplifies PCB layout, and accelerates design time. Typical applications include industrial relay and solenoid drivers, LED matrix and seven-segment display drivers, lamp drivers, unipolar stepper motor drivers, and printer hammer drivers. The wide input logic compatibility further supports direct connection to 3.3 V microcontrollers when paired with a TTL-threshold interface. When designing with the UDN2987LW, attention to per-channel current limit and total package dissipation is essential. At 8 channels x 350 mA with elevated outputs, the SOIC-20 will dissipate substantial heat, requiring copper-pour heatsinking. Compliance with absolute maximum ratings (50 V load dump, 35 V sustaining) avoids avalanche damage.

RFQ پەیوەندی
UDN2987LW6T - 8-CH Source Driver 350mA SOIC-20 | Allegro
UDN2987LW6T

UDN2987LW6T - 8-CH Source Driver 350mA SOIC-20 | Allegro

The Allegro MicroSystems UDN2987LW6T is an 8-channel bipolar source driver with integrated overcurrent protection, housed in a 20-pin SOIC surface-mount package. Each of the eight outputs can source up to 350 mA continuously, making it a high-side driver for relays, solenoids, motors, LEDs, and incandescent lamps driven from low-level logic. The device interfaces standard TTL/CMOS logic to inductive or lamp loads up to 50 V supply rails. An 8-channel source driver is a smart power IC that sits between a microcontroller's logic-level outputs and high-current loads, sourcing current from a positive supply to each load when activated. It is a member of the bipolar high-side switch family within Allegro's broader power management IC portfolio, designed to replace discrete Darlington transistors with built-in protection. The architecture uses eight open-collector Darlington-style outputs with individual overcurrent sensing on every channel. Key features include 350 mA continuous output current per channel, integrated overcurrent protection with auto-recovery, a 50 V load-dump tolerant output rating, and built-in thermal shutdown. The SOIC-20 package (wide-body, 300-mil) supports surface-mount assembly with adequate thermal performance for the full operating range. Typical quiescent and leakage paths are designed to minimize power dissipation when channels are inactive. The UDN2987LW6T is built on Allegro's DABIC-5 bipolar process, integrating eight high-side Darlington switches with sense resistors and comparators that throttle each output during a fault. The fault logic latches off the affected channel until the fault clears, preventing destructive thermal runaway. This per-channel protection is an advantage over discrete designs where one transistor failure can damage the whole system. Typical applications include industrial relay driver boards, automotive dashboard indicator multiplexers, LED matrix displays, and printer hammer or solenoid drivers. The wide output voltage tolerance supports 12 V and 24 V automotive and industrial bus systems directly. Designers appreciate the eight-channel integration when PCB real estate is constrained. When designing with this part, ensure the supply decoupling capacitor is placed adjacent to the device with low-impedance traces to suppress voltage transients during turn-off of inductive loads. Always use flyback diodes across inductive loads or rely on the internal clamp protection to prevent output overvoltage. This page synthesizes distributor pricing, drop-in alternatives in the SOIC-20 footprint, and practical design notes not found in the manufacturer datasheet, giving engineers a complete sourcing and integration reference.

RFQ پەیوەندی
UDN2987LWTR-6-T - 8-Ch Source Driver, 350mA, 35V SOIC-20 | Allegro
UDN2987LWTR-6-T

UDN2987LWTR-6-T - 8-Ch Source Driver, 350mA, 35V SOIC-20 | Allegro

The Allegro MicroSystems UDN2987LWTR-6-T is a DABIC-5 8-channel source driver with integrated over-current protection, housed in a 20-lead wide-body SOIC (SOIC-W) package. Each of its eight bipolar high-side outputs is rated at 350 mA continuous and the device operates across a 5 V to 35 V load supply range, making it a true interface between low-level logic (TTL, CMOS, DTL, PMOS) and inductive or lamp loads such as relays, solenoids, motors, LEDs, and incandescent lamps. What is an 8-channel source driver? A source driver is a type of power switch IC that sits between a low-current logic controller (microcontroller, FPGA, or ASIC GPIO) and a high-current load. Unlike a low-side driver that switches the ground return, a source driver switches the positive rail directly into the load, eliminating the need for a separate pull-up resistor and providing a cleaner, faster-edged waveform. Source drivers belong to the broader category of peripheral drivers / power distribution switches, which in turn fall under power management ICs. Key features of the UDN2987LWTR-6-T include a 350 mA per-channel continuous output current, an internal current-limit / over-current protection circuit on every channel, built-in output clamp diodes for driving inductive loads, and logic inputs compatible with 5 V and 12 V CMOS/TTL families. The 20-SOIC wide-body package provides ample thermal headroom for the SOIC-W variant while keeping a small board outline. The "-6" suffix denotes the over-current-protected version of the legacy UDN2987, while the LW suffix indicates the wide-body SOIC package, and the TR suffix denotes tape-and-reel packaging. Architecturally, the part is built on Allegro's DABIC-5 (Digital Analog Bipolar IC) process, which integrates bipolar output stages with CMOS-compatible logic on a single die. The output stage uses a Darlington source configuration, and a dedicated sense resistor paired with a comparator on each channel enforces the over-current threshold with high accuracy and temperature stability. A voltage clamp is included on every output for safe flyback energy dissipation when switching off inductive loads. Typical applications include multi-channel LED or lamp drivers, unipolar stepper motor winding drivers, solenoid arrays in industrial automation, relay and valve driver boards, and thermal printer head drivers. The wide 5 V-35 V supply range also makes it a popular choice for 12 V and 24 V industrial buses. Designers often pair this source driver with a complementary sink driver such as the ULN2803 or UDN2987 drive to build a fully bipolar half-bridge. When designing with this part, ensure that the total package dissipation does not exceed the SOIC-W thermal rating - the sum of (VOUT - VLOAD) x I per channel can become significant when driving low-voltage loads from a 24 V or 35 V rail. Use the built-in clamp diodes to ground (or to a separate Vs supply) so inductive flyback is absorbed inside the IC. Decouple VCC close to the device with at least 0.1 uF, and tie unused inputs to ground for noise immunity. This page synthesizes distributor pricing, drop-in Allegro and cross-brand source-driver alternatives in the SOIC-20 wide-body footprint, and practical design notes not collected in a single manufacturer document.

RFQ پەیوەندی
UJA1169TK/XZ - Mini HS-CAN SBC with 5V VEXT | NXP Semiconductors
UJA1169TK/XZ

UJA1169TK/XZ - Mini HS-CAN SBC with 5V VEXT | NXP Semiconductors

The NXP UJA1169TK/XZ is a mini high-speed CAN System Basis Chip (SBC) integrating an ISO 11898-2:201x compliant HS-CAN transceiver with an embedded 5V or 3.3V 250 mA scalable supply (V1) for a microcontroller, packaged in a 20-pin HVSON (3.5 x 5.5 mm) surface-mount package with exposed thermal pad. This /XZ variant is the VEXT-enabled member of the UJA1169TK family, providing a dedicated 5V supply rail for off-board sensors, transceivers, or peripheral hardware outside the ECU module. A System Basis Chip (SBC) is an automotive-grade mixed-signal IC that combines a CAN/LIN physical layer with on-board DC-DC or LDO regulators, watchdog, and basic protection. SBCs sit between the 12V/24V automotive battery rail and the microcontroller, collapsing what would otherwise be 4-6 discrete components (transceiver + 5V LDO + 3.3V LDO + watchdog + reset IC + wake logic) into a single footprint-reducing device. Within the NXP SBC hierarchy the UJA1169TK family is positioned below the UJA1164/UJA1167 (which add LIN masters) and above basic transceivers like the TJA1042/TJA1057. Key features of the UJA1169TK/XZ include ISO 11898-2:201x (and the upcoming merged ISO 11898-2/5/6) compliant HS-CAN data rates up to 1 Mbit/s, an integrated V1 regulator programmable between 3.3V and 5V at up to 250 mA for the host MCU, the VEXT 5V rail for off-board loads on this /X variant, integrated CAN bus dominant clamping and bus fault protection, an SPI interface for MCU configuration and diagnostics, plus a window watchdog and reset output for ASIL-B capable system partitioning. The HVSON-20 package provides a low thermal resistance path suitable for the continuous 1W-2W dissipation observed in body-control and gateway nodes. The UJA1169TK/XZ is designed for automotive body electronics and chassis applications that need a compact, ISO-compliant HS-CAN node without a separate LIN master - such as body control modules (BCM), HVAC panels, seat controllers, mirror modules, lighting ECUs, and gateway peripherals. Compared with discrete CAN transceiver + LDO solutions, the UJA1169TK/XZ reduces BOM count, PCB area, and quiescent current, which is critical for nodes permanently attached to the battery bus. When designing with this part, observe the HVSON-20 PCB land pattern and use sufficient copper area on the exposed pad to keep the die within its -40C to +125C operating range. Decouple V1/VEXT with the ceramic capacitor values recommended in the NXP UJA1169 datasheet and follow NXP application note AN-10223 for EMC-compliant CAN bus layout.

RFQ پەیوەندی