Analog Devices

AD571SD - 10-Bit SAR ADC with Reference | Analog Devices

MPN: AD571SD ✗ کۆتایی ژیان
+5 V Vdss 18-pin SBDIP Package Yes Speed
MOQ: 1 |

AD571SD گشتی

The Analog Devices AD571SD is a 10-bit, single-input successive-approximation analog-to-digital converter integrated with a digital-to-analog converter, voltage reference, clock, comparator, successive-approximation register, and output buffers in an 18-pin SBDIP package. The device operates from a +5 V supply with a -12 V or -15 V analog supply, and it supports standard 0 V to +10 V unipolar or -5 V to +5 V bipolar input ranges. It is not recommended for new designs.

A successive-approximation ADC is a data-converter category that compares an unknown analog voltage with successive internally generated reference levels. Each clock cycle resolves one additional bit, allowing a complete conversion to be completed in 10 clock periods. The AD571 integrates this conversion function with its supporting DAC and reference circuitry, reducing the number of external precision components required in conventional instrumentation designs.

Key features include 10-bit resolution, one analog input channel, successive-approximation conversion, a complete on-chip reference and clock, parallel digital outputs, and integration of the principal converter blocks on one monolithic chip. The AD571 can be configured for 0 V to +10 V unipolar operation by connecting the bipolar-offset control to digital common, or for -5 V to +5 V bipolar operation by leaving that control open.

The converter architecture compares the selected input against a DAC-generated trial voltage and uses a comparator to determine each successive-approximation decision. A 10-bit successive-approximation register retains the conversion result until the next conversion or a clear operation. Its integrated reference establishes the conversion scale, while the clock controls conversion timing and the output buffers provide compatible parallel digital outputs for external counters, processors, or display systems.

Typical applications include digital voltmeters, process-control instrumentation, laboratory measurement equipment, industrial data-acquisition systems, and embedded measurement systems that require a parallel-output ADC. In these systems, the AD571 can reduce the need for a discrete reference and DAC, although its legacy interface and lifecycle status make it primarily appropriate for maintenance of existing equipment.

Designers should account for the separate +5 V and negative analog supplies, connect analog and digital grounds according to the manufacturer's grounding guidance, and use suitable bypass capacitors at the supply pins. Sampling and clock timing should also be checked against the acquisition system so that acquisition time and conversion time provide sufficient settling before the result is read.

This product page combines manufacturer specifications, lifecycle information, package details, application guidance, and verified cross-reference results for engineers maintaining an AD571SD-based design. It also distinguishes confirmed drop-in candidates from alternatives that would require different packages or electrical behavior.

جێگرەوەکانی جێگۆڕکێ بۆ AD571SD — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ AD571SD (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Resolution, Comparator, Digital Interface, Integrated Clock, Integrated Reference.

Analog Devices
Comparator: Integrated comparator
Digital Interface: 10-bit parallel, three-state outputs
Integrated Clock: Internal clock
بەراوردکردن لەگەڵ AD571SD →
Analog Devices
Resolution: 10 bits
Digital Interface: Parallel

AD571JD

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Analog Devices
📦 18-pin SBDIP
10 bit · Successive approximation (SAR) · 1 channel · Single-ended · 10-bit parallel, three-state outputs · 40 us maximum · Internal voltage reference · Internal clock

پەیوەندی بۆ نرخ

بینینی داتاشیت →

AD571KD

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 18-pin SBDIP
AD571 family conversion performance is retained, but the exact temperature-grade and ordering differences are ; verify all pin and supply details before substitution

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

AD571SD زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

وردی 10 bit
Input Channels 1 channel
Conversion Architecture Successive approximation (SAR)
پاکێج 18-pin SBDIP
Positive Supply Voltage +5 V
Negative Supply Voltage -12 V or -15 V
Unipolar Input Range 0 V to +10 V
Bipolar Input Range -5 V to +5 V
Integrated Reference Yes
Integrated Clock Yes
Integrated DAC Yes
Comparator Integrated
Successive-Approximation Register Integrated
Output Buffers Integrated
Output Interface Parallel
جۆری دامەزراندن Through-hole

ڕێنمایی ڕێکخستنی پینی AD571SD 18-pin sbdip

ڕێکخستنی پین بۆ AD571SD (پاکێجی 18-pin sbdip). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 18-pin sbdip بۆ AD571SD

هیچ داتای وردی پینئاوت بەردەست نییە بۆ AD571SD.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

AD571SD گونجاوە بۆ 6 بەکارھێنانs: Digital Voltmeter Front End, Process-Control Instrumentation, Laboratory Measurement Equipment, Industrial Data-Acquisition System, Embedded Test and Measurement Controller, Legacy Equipment Maintenance.

📟

Digital Voltmeter Front End

The AD571SD fits a legacy digital voltmeter because it combines a 10-bit successive-approximation ADC with an internal DAC, voltage reference, clock, comparator, register, and output buffers. Its -5 V to +5 V bipolar mode is useful when the meter must measure signals above and below ground, while the 0 V to +10 V mode supports unipolar process-voltage measurements. The integrated reference reduces external precision-component count. The principal design task is preserving conversion timing and presenting the parallel output result to the counter, display, or control logic without introducing timing uncertainty.

🏭

Process-Control Instrumentation

The AD571SD can serve as the analog measurement section of a process-control instrument when the existing system uses a 10-bit parallel-output converter. Its selectable -5 V to +5 V bipolar input range accommodates process signals centered around ground, and the integrated reference and clock reduce the number of external components needed for an equivalent modular design. Because this is a not-recommended-for-new-designs product, it is most appropriate for equipment maintenance or replication. Signal-conditioning isolation, input scaling, grounding, and acquisition timing remain external engineering responsibilities.

🧪

Laboratory Measurement Equipment

The AD571SD is applicable to legacy laboratory instruments that require a 10-bit measurement channel with parallel digital output and both unipolar and bipolar input capability. The integrated DAC, reference, clock, comparator, successive-approximation register, and output buffers create a complete conversion subsystem within one 18-pin SBDIP. This integration can simplify replication of an older measurement architecture, although a modern instrument should evaluate currently supported converters. Input conditioning, reference accuracy, calibration, and sampling timing should be reviewed to ensure the converter's accuracy is not limited by surrounding circuitry.

🖥️

Industrial Data-Acquisition System

The AD571SD can be integrated into a legacy industrial data-acquisition system where one 10-bit analog channel and parallel outputs are sufficient. Its bipolar mode supports sensors and conditioned signals extending below ground, while its positive and negative supply arrangement provides compatibility with established analog-signal-chain designs. The internal clock and reference support a compact converter arrangement, but the design must respect the required +5 V and -12 V or -15 V rails. Backplane wiring, ground separation, shielding, and settling time should be engineered for the operating environment.

🔧

Embedded Test and Measurement Controller

The AD571SD is suitable for an embedded controller that reads a legacy analog measurement channel through a parallel interface. Its 10-bit resolution can represent 1,024 quantization levels, while the integrated reference and clock allow the converter to operate as a largely self-contained measurement block. The controller must capture the conversion-complete indication and parallel output word at the correct timing. Use the manufacturer timing diagram to coordinate acquisition, conversion, and output latching, particularly when the measured signal changes rapidly or when several analog stages share limited board space.

🛠️

Legacy Equipment Maintenance

The AD571SD is particularly relevant to maintenance and repair of electronic instruments built around the original Analog Devices AD571 converter. Its 10-bit single-channel architecture, integrated reference and clock, and 18-pin SBDIP interface allow an existing circuit to be reproduced when a board revision is required. For this use, preserve the original footprint, pin functions, supply rails, negative-supply generation, and bypass layout rather than redesigning around an unverified substitute. The manufacturer's lifecycle marking should be considered when planning long-term spares, and lot documentation should be requested for regulated production use.

What is the AD571SD?
The AD571SD is a 10-bit, single-input successive-approximation analog-to-digital converter from Analog Devices. It combines a DAC, voltage reference, clock, comparator, successive-approximation register, and output buffers on one chip and is supplied in an 18-pin SBDIP package. According to the manufacturer datasheet, it is specified with a +5 V supply and a -12 V or -15 V negative supply.
What are the key specifications of AD571SD that engineers should know?
The AD571SD provides 10-bit resolution, one analog input, successive-approximation conversion, parallel outputs, and an integrated reference and clock in an 18-pin SBDIP package. It supports a 0 V to +10 V unipolar range or a -5 V to +5 V bipolar range. Analog Devices specifies the device for a +5 V supply with a -12 V or -15 V negative supply, as described in the AD571 datasheet.
Where can I download the AD571SD datasheet PDF?
The official AD571SD datasheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD571.pdf. The document is titled AD571 Data Sheet and contains the AD571 specifications, operating information, pin descriptions, and application details. Use the official Analog Devices PDF when designing or servicing equipment because it is the authoritative source for the device.
Where can I find the AD571SD pinout?
The AD571SD pin configuration is shown in the manufacturer AD571 datasheet at the official Analog Devices PDF link. The AD571SD uses an 18-pin SBDIP package, so the PCB footprint should follow the pin numbering and package dimensions printed in that document. Assign analog inputs, supplies, grounds, control signals, and parallel outputs by their exact datasheet pin names rather than inferring connections from another converter.
How does the AD571 perform analog-to-digital conversion?
The AD571 uses successive-approximation conversion to determine one output bit during each conversion step. Its internal DAC generates successive trial levels, the comparator compares those levels with the analog input, and the successive-approximation register retains the decision. The Analog Devices datasheet describes the DAC, comparator, register, reference, clock, and output buffers as integrated blocks on the same chip.
Can AD571SD measure bipolar and unipolar signals?
Yes, the AD571SD supports both 0 V to +10 V unipolar input and -5 V to +5 V bipolar input. The manufacturer datasheet states that shorting the bipolar-offset control to digital common produces the standard unipolar range, while leaving the control open introduces the bipolar offset current for the -5 V to +5 V range.
AD571SD vs AD571: what is the difference?
The AD571 is the base converter described by Analog Devices, while AD571SD identifies the specific 18-pin SBDIP ordering configuration. The retrieved manufacturer listing identifies AD571SD as a 10-bit, single-input, SAR converter in an 18-pin SBDIP. Before treating another AD571 suffix as interchangeable, confirm its package, temperature grade, supply requirements, and exact pin functions in the corresponding manufacturer documentation.
When should I choose AD571SD over another legacy ADC?
Choose AD571SD when maintaining equipment that already uses its 18-pin SBDIP footprint and requires an integrated 10-bit SAR converter, reference, clock, DAC, comparator, and parallel output interface. It is also appropriate when -5 V to +5 V bipolar capability is required. For a new design, favor a currently recommended converter because the manufacturer marks AD571 as not recommended for new designs.
Is AD571SD suitable for industrial measurement systems?
The AD571SD is suitable for legacy industrial measurement and data-acquisition systems that use its 10-bit conversion, integrated reference and clock, and parallel output interface. It can support digital voltmeters, process instrumentation, and laboratory measurement equipment. Its lifecycle status means it is primarily appropriate for maintaining or replicating an existing installation rather than selecting it for a new platform.
What is the best drop-in replacement for AD571SD?
No independently verified cross-brand drop-in replacement for the AD571SD was identified. The AD571 family suffix variants should be checked against the exact package, pinout, temperature grade, and electrical specifications before substitution. Use the Request a Quote form on this page to ask about the original AD571SD or an explicitly qualified same-family option rather than assuming that a functionally similar ADC is pin-compatible.
What can replace AD571SD?
The closest replacement path is an AD571-family device with the same 18-pin package and matching pin functions, but no universally compatible substitute can be confirmed from the available cross-reference results. A replacement must match the 18-pin SBDIP footprint, +5 V and negative-supply requirements, 10-bit resolution, input range, clock arrangement, and parallel output timing. Request a Quote for sourcing assistance with the exact replacement assessment.
Is AD571SD the same as AD571J?
The AD571SD and AD571J belong to the AD571 converter family, but the suffixes identify different ordering configurations and may change package construction or qualification. They should not be assumed interchangeable without checking the ordering guide, package drawings, pin descriptions, and electrical specifications. The verified product listing specifically identifies AD571SD as an 18-pin SBDIP configuration.
What is the best cross-brand equivalent for AD571SD?
No cross-brand equivalent can be recommended as a confirmed drop-in replacement because the cross-reference results do not identify a pin-compatible 18-pin SBDIP part with verified electrical equivalence. A replacement lacking the same pinout may require PCB changes, interface redesign, or additional support circuitry. Use the Request a Quote form on this page to discuss the original device or a candidate whose compatibility has been documented.
How do I power and decouple AD571SD?
The AD571SD requires a +5 V supply and a negative supply of -12 V or -15 V according to the manufacturer datasheet. Place suitable bypass capacitors close to the supply pins and follow the datasheet grounding and connection diagram to control analog and digital return currents. Keep sensitive analog routing away from noisy digital clock and output paths to preserve conversion accuracy.
Where can I buy AD571SD and check its lead time?
Use the Request a Quote form on this page to inquire about AD571SD availability, current lead time, and minimum order quantity. The manufacturer lists AD571 as not recommended for new designs, so lifecycle status and sourcing conditions should be confirmed before placing a maintenance order. A successful replacement program also depends on the obsolete quantity still required and the permitted package configuration.
Is AD571SD compliant with RoHS, REACH, or AEC-Q100?
The AD571SD's RoHS, REACH, and AEC-Q100 status cannot be conclusively established from the retrieved product-page excerpts. Do not infer automotive qualification from the ordering suffix or assume material compliance for an older converter. Request current compliance documentation for the exact lot through the Request a Quote form before using the device in a regulated or automotive design.

داتای سەرچاوەی ئەندازیاری بۆ AD571SD — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the AD571SD when repairing or replicating equipment that uses its 18-pin SBDIP footprint, 10-bit SAR conversion, integrated reference and clock, and parallel output interface. It is particularly suitable when the existing circuit needs -5 V to +5 V bipolar measurement or uses +5 V and negative analog rails. AD571JD and AD571KD are same-family candidates that may preserve the architecture, but their exact ordering, temperature, qualification, and pin details must be checked before release. Do not select a modern ADC as a drop-in replacement unless its package, pinout, supply arrangement, input range, timing, and output interface are all matched; otherwise it is a redesign rather than a substitution. For new designs, prefer a converter that Analog Devices currently recommends for new designs.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە AD571JD AD571KD
Brand Analog Devices Analog Devices Analog Devices
Package 18-pin SBDIP 18-pin SBDIP 18-pin SBDIP
Resolution 10 bit 10 bit 10 bit
Input Channels 1 channel 1 channel 1 channel
Conversion Architecture Successive approximation (SAR) Successive approximation (SAR) Successive approximation (SAR)
Positive Supply Voltage +5 V +5 V +5 V
Negative Supply Voltage -12 V or -15 V -12 V or -15 V -12 V or -15 V
Unipolar Input Range 0 V to +10 V 0 V to +10 V 0 V to +10 V
Bipolar Input Range -5 V to +5 V -5 V to +5 V -5 V to +5 V
Integrated Reference Yes Yes Yes
Integrated Clock Yes Yes Yes
Output Interface Parallel Parallel Parallel

جیاکەرەوە سەرەکییەکان

  • Complete conversion subsystem in one converter package (بەراورد بەDiscrete ADC implementation)
  • Selectable unipolar or bipolar measurement range (بەراورد بەUnipolar-only legacy ADC)
  • Complete parallel-output interface (بەراورد بەSerial-output converter)

تێبینییەکانی دیزاین

The AD571SD requires a +5 V supply and a -12 V or -15 V negative supply according to the manufacturer datasheet. Bypass each supply close to its package pin with the capacitance and placement recommended in the datasheet. Keep the negative-rail return current out of the sensitive analog signal path, and avoid routing the analog ground current through digital output-return wiring. Confirm that the negative supply remains within its specified operating range during startup and shutdown.

Place the converter, analog input components, and local decoupling in the same section of the PCB, with the digital clock and parallel output traces directed away from the analog input. Use a continuous ground-plane strategy under the device unless the system design requires a deliberate partition. Keep input traces short and shield them where necessary. The AD571's internal reference and clock reduce component count, but they do not remove the need for careful analog layout around the converter pins.

Do not infer pin functions from a generic 18-pin ADC diagram; use the AD571 manufacturer's pin description because supply, reference, offset-control, clock, and parallel-output functions must match exactly. For bipolar operation, the manufacturer states that leaving the bipolar-offset control open selects the offset-current arrangement, while shorting it to digital common selects the standard unipolar range. Verify this configuration in the circuit schematic before fabrication.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The retrieved manufacturer product listing identifies AD571 as not recommended for new designs but does not provide RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Obtain current compliance documentation for the exact AD571SD ordering configuration and manufacturing lot before production use.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ad571 datasheet AD571SD datasheet AD571SD specifications AD571SD pinout AD571SD 18 pin SBDIP AD571SD input range AD571SD replacement AD571SD equivalent AD571SD drop-in replacement AD571SD vs AD571JD AD571SD vs AD571KD AD571SD price AD571SD stock Analog Devices AD571SD

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices AD571SD AD571 AD571JD AD571KD analog-to-digital converter ADC successive-approximation ADC SAR ADC data converter semiconductor 10-bit resolution parallel output interface integrated voltage reference integrated clock internal DAC comparator successive-approximation register 18-pin SBDIP DIP package through-hole package unipolar input bipolar input digital voltmeter process-control instrumentation
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ