Analog Devices

AD6623ABC 4-Channel 104 MSPS TSP | Analog Devices

MPN: AD6623ABC ✗ کۆتایی ژیان
196-pin CSP-BGA Package
MOQ: 1 |

AD6623ABC گشتی

Analog Devices AD6623ABC is a 4-channel Transmit Signal Processor (TSP) operating at 104 MSPS and packaged in a 196-pin CSP-BGA. The device creates high-bandwidth digital transmit data for TxDAC converters from baseband data generated by a Digital Signal Processor. Its four-channel architecture and 104 MSPS processing rate position it as a dedicated digital transmit-signal-processing stage for communications equipment requiring parallel, repeatable digital signal generation.

A Transmit Signal Processor is a specialized digital signal-processing IC positioned between a baseband DSP and a transmit data converter. It implements the digital interpolation, filtering, gain, and waveform-shaping functions required to convert low-speed baseband data into the high-rate sample stream accepted by a TxDAC. In the broader semiconductor hierarchy, the AD6623 belongs to the digital signal processor and transmit-signal-processing categories, complementing general-purpose DSPs with a fixed waveform-generation data path.

The AD6623 provides four processing channels with a maximum sample rate of 104 MSPS. Its digital transmit path is designed to provide repeatable manufacturing and higher accuracy than comparable high-dynamic-range analog approaches. The manufacturer also identifies the AD6623 as pin-compatible with the AD6622 and capable of operating in AD6622-compatible control-register mode, which can simplify firmware migration and board redesign when the surrounding system architecture is compatible.

The AD6623 is intended for communications transmitters using TxDAC architectures, including cellular, wireless, and other high-bandwidth signal-generation systems. Digital IF signal processing provides manufacturing repeatability, flexibility, and accuracy because waveform shaping is performed with digital logic rather than relying exclusively on precision analog networks. Its 104 MSPS rate supports four simultaneously processed transmit data streams or repeated use across a multi-channel RF transmit design.

Assembly requires a 196-pin CSP-BGA land pattern and careful high-speed layout practices. The device should be placed near the associated digital interface and TxDAC circuitry to minimize data-transition distortion and interconnect timing margin. Power, ground, clock, and interface routing must follow the pin-description and layout guidance in the manufacturer datasheet, with particular attention to return paths and termination of high-speed digital connections.

The principal design trade-off is fixed-function performance versus implementation flexibility. Compared with implementing every interpolation and shaping stage in a general-purpose FPGA, the AD6623 integrates a dedicated transmit-processing path and can reduce processor overhead. Designers should still validate clock-jitter, interpolation-filter, gain-control, and output-data timing against the intended modulation waveform and system-level error budget.

This page combines the confirmed device identity, packaging, architecture, and compatibility information with practical selection guidance, structured specifications, and application-focused engineering notes. It identifies where the AD6623ABC fits in a TxDAC signal chain and distinguishes verified drop-in options from package or feature mismatches that require broader redesign.

جێگرەوەکانی جێگۆڕکێ بۆ AD6623ABC — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

AD6623ABCZ

✅ جێگرەوەی ڕاستەوخۆ
📦 196-pin CSP-BGA
Same 196-pin CSP-BGA architecture and AD6623 device family; the suffix identifies a different ordering or temperature-grade option, with 0% change in the confirmed 4-channel and 104 MSPS core ratings

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

AD6622ABC

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 196-pin CSP-BGA
AD6622 has the same documented pin-compatible architecture, while the AD6623 adds a 4-channel, 104 MSPS TSP configuration and AD6622-compatible control-register mode

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

AD6622ABCZ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 196-pin CSP-BGA
AD6622-family option in the pin-compatible CSP-BGA footprint; differs from the 4-channel, 104 MSPS AD6623 configuration and therefore requires register, timing, and function verification

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

AD6623ABC تایبەتمەندییەکان

Device Type 4-channel Transmit Signal Processor (TSP)
Maximum Sample Rate 104 MSPS
Number of Channels 4 channels
Primary Data Path Digital IF transmit-signal processing
Compatible Data Converter TxDAC transmit digital-to-analog converter
Source Data Interface Baseband data from a Digital Signal Processor
پاکێج 196-pin CSP-BGA
Package Type Surface-mount chip-scale ball grid array
Shipping Format Tray
Control-Register Compatibility AD6622-compatible control register mode
Pin Compatibility Pin-compatible with AD6622
Data Sheet Revision Rev. A, 03/01/2002

ڕێنمایی ڕێکخستنی پینی AD6623ABC surface-mount chip-scale ball grid array

ڕێکخستنی پین بۆ AD6623ABC (پاکێجی surface-mount chip-scale ball grid array). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی surface-mount chip-scale ball grid array بۆ AD6623ABC

هیچ داتای وردی پینئاوت بەردەست نییە بۆ AD6623ABC.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

AD6623ABC گونجاوە بۆ 6 بەکارھێنانs: Cellular Transmitter Signal Generation, Wireless Baseband-to-DAC Interface, Multi-Channel RF Transmit Processing, Digital IF Test and Measurement, Instrumented Radio-Frequency Systems, Legacy TxDAC Platform Refresh.

🌐

Cellular Transmitter Signal Generation

The AD6623ABC fits cellular transmit chains that require repeatable digital IF waveform generation ahead of a TxDAC. Its four processing channels and 104 MSPS operating rate provide dedicated bandwidth for digital interpolation, shaping, and gain functions associated with digital IF signal processing. Placing the device between a baseband Digital Signal Processor and the transmit converter reduces the processing burden on the general-purpose DSP. The trade-off is that the AD6623 is a fixed-function legacy architecture, so modulation updates, clocking, filter behavior, and latency must be confirmed against the transmitter waveform plan rather than assumed from channel count alone.

📶

Wireless Baseband-to-DAC Interface

The AD6623ABC is suitable for the digital path that converts baseband samples into the high-rate transmit stream expected by a TxDAC. Its 104 MSPS rate and four-channel organization allow parallel processing of transmit data, while digital IF filtering and shaping improve repeatability compared with an equivalent high-dynamic-range analog implementation. In this arrangement, the baseband DSP supplies source data and the AD6623 performs the dedicated transmit-processing stage. System engineers must calculate total clock, interpolation, latency, and gain-control margins across the DSP, AD6623, and TxDAC to avoid clipping or timing errors.

🔧

Multi-Channel RF Transmit Processing

The four-channel AD6623ABC architecture is useful in RF transmit systems that need more than one digital signal-processing path or configurable channel organization. Its 104 MSPS sample rate supports high-bandwidth data prepared for TxDAC converters, while dedicated digital processing offers repeatable production behavior and flexible control of transmit waveforms. Compared with replicating several complete signal chains in general-purpose programmable logic, the integrated TSP can reduce implementation complexity. The decision depends on the required number of active channels, interpolation factors, acceptable latency, clock-distribution scheme, and whether the TxDAC interface timing is fully supported.

🖥️

Digital IF Test and Measurement

The AD6623ABC can serve as the digital IF generation element in test equipment that produces controlled baseband-to-RF waveforms through a TxDAC-based chain. Digital transmit processing makes the test signal repeatable and allows modulation parameters to be changed through control logic rather than manually adjusted analog networks. The 104 MSPS processing capability and four-channel organization are useful when several test vectors or operating modes must be handled. Calibration is critical: clock jitter, interpolation-filter response, amplitude accuracy, latency, and output-code behavior must be characterized across the full operating range to establish trustworthy measurements.

📡

Instrumented Radio-Frequency Systems

The AD6623ABC is appropriate for specialized RF systems that need flexible, repeatable digital transmit waveforms before conversion to analog signals. Its digital IF processing path can simplify manufacturing alignment and support programmable channel behavior in a baseband-DSP architecture. Four channels and a 104 MSPS rate provide useful throughput for wideband or multi-path signal generation. Designers should evaluate whether the AD6623's fixed filtering and interpolation resources match the selected modulation standard. Analog bandwidth, TxDAC linearity, image rejection, output power, and the complete clock tree must be evaluated together rather than treating the TSP as a stand-alone RF power amplifier.

🔄

Legacy TxDAC Platform Refresh

The AD6623ABC can support a controlled refresh of a legacy TxDAC platform because Analog Devices documents pin compatibility with AD6622 and operation in AD6622-compatible control-register mode. This can simplify hardware reuse while providing the confirmed 4-channel, 104 MSPS AD6623 configuration. A redesign should begin with an exact comparison of package balls, supply rails, clock requirements, interface timing, reset states, and register-map behavior. PCB changes may still be necessary if the adjacent DSP, memory, TxDAC, or power architecture has changed, so drop-in status should be validated at both schematic and layout levels.

کورتەی بەرهەمە پێشنیارکراوەکان

AD6623 Same 4-channel 104 MSPS Transmit Signal Processor family بەکارهێنراوە لە: Cellular Transmitter Signal Generation, Wireless Baseband-to-DAC Interface, Multi-Channel RF Transmit Processing, Digital IF Test and Measurement, Instrumented Radio-Frequency Systems, Legacy TxDAC Platform Refresh AD6622 Pin-compatible control-register architecture بەکارهێنراوە لە: Cellular Transmitter Signal Generation, Wireless Baseband-to-DAC Interface, Multi-Channel RF Transmit Processing, Digital IF Test and Measurement, Instrumented Radio-Frequency Systems, Legacy TxDAC Platform Refresh
What is the AD6623ABC?
The AD6623ABC is a 4-channel Transmit Signal Processor that operates at up to 104 MSPS and generates high-bandwidth digital transmit data for TxDAC converters. According to the Analog Devices product page and manufacturer datasheet, it accepts baseband data from a Digital Signal Processor and performs dedicated digital IF transmit-signal processing in a 196-pin CSP-BGA package.
What are the key specifications of AD6623ABC that engineers should know?
The AD6623ABC combines four processing channels, a maximum sample rate of 104 MSPS, and a 196-pin CSP-BGA package. According to the Analog Devices product page and manufacturer datasheet, it also provides AD6622-compatible control-register mode and is pin-compatible with the AD6622. These features make it a fixed-function digital IF processing stage for TxDAC-based transmitters.
Where to download the AD6623ABC datasheet PDF?
The official AD6623ABC datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD6623.pdf. The manufacturer data sheet is identified as Rev. A, dated 03/01/2002. It contains the device description, electrical characteristics, recommended operating conditions, thermal-management guidance, and the authoritative package-pin information.
Where can I find the AD6623ABC pinout?
Use the pin-description table and package drawing in the Analog Devices AD6623 manufacturer datasheet to locate the AD6623ABC pinout. The device is supplied in a 196-pin CSP-BGA, so its footprint includes 196 ball positions and an exposed thermal-management land pattern described in the datasheet. The manufacturer’s pin table should be used directly when assigning tracks, power planes, and ground connections.
Is the AD6623ABC pin-compatible with the AD6622?
Yes, Analog Devices states that the AD6623 is pin-compatible with the AD6622 and can operate in AD6622-compatible control-register mode. This compatibility is useful for controlled redesigns because the board footprint and register architecture can be retained. Firmware, timing, voltage, and feature-set equivalence must still be checked before treating the AD6622 as a replacement.
Can AD6623ABC replace AD6622 in an existing transmitter?
The AD6623ABC can be considered for an AD6622-based design because Analog Devices specifies pin compatibility and AD6622-compatible control-register mode. However, a safe conversion also requires verification of supply voltage, clocking, signal levels, reset behavior, thermal performance, and whether the AD6623's 4-channel and 104 MSPS capabilities are needed. The manufacturer datasheet and existing board schematic remain the controlling references.
What can replace AD6623ABC on the same PCB footprint?
The closest documented drop-in direction is the AD6622 family because Analog Devices explicitly identifies the AD6623 as pin-compatible with AD6622 and supports AD6622-compatible control-register mode. Exact suffix, grade, and package ordering must match the installed CSP-BGA footprint. Other AD6623 package options cannot be assumed interchangeable when their ball count or lead arrangement differs.
AD6623ABC vs AD6622ABC — which is better for a TxDAC transmitter?
Choose AD6623ABC when the design benefits from its 4-channel, 104 MSPS Transmit Signal Processor architecture and its ability to run in AD6622-compatible control-register mode. Choose an AD6622 variant when its established functionality, qualification, or lifecycle conditions better match the transmitter. The final decision depends on channel count, throughput, clocking, thermal conditions, and the exact board footprint.
When should I choose AD6623ABC over AD6622ABC?
Choose AD6623ABC when the transmitter benefits from a dedicated 4-channel digital IF processing path operating at 104 MSPS, particularly for high-bandwidth TxDAC signal generation. Because the devices are pin-compatible and the AD6623 can use AD6622-compatible control-register mode, an existing AD6622 architecture may be upgraded without relocating the component. Confirm that the added processing capability is needed and that all sequencing and timing requirements are satisfied.
Is AD6623ABC suitable for cellular and wireless base stations?
The AD6623ABC is suitable for communications transmitters that generate high-bandwidth digital data for TxDAC converters, including cellular and wireless transmit chains. Its 4-channel architecture and 104 MSPS rate support parallel digital waveform generation, while digital IF processing improves manufacturing repeatability and configuration flexibility. RF frequency bands, channel bandwidth, modulation format, and the adjacent TxDAC must also satisfy the system specifications.
What is the lead time for AD6623ABC?
Current production lead time for AD6623ABC must be requested through the Request a Quote form on this page. The part uses an older 196-pin CSP-BGA technology and is not shown as a current mass-production choice, so procurement timing should not be assumed from generic catalog lead times. Include the required quantity, date code, target price, and inspection requirements with the request.
Is AD6623ABC in stock?
Current AD6623ABC inventory should be checked through the Request a Quote form on this page rather than assumed from a generic catalog listing. Availability for an older 196-pin CSP-BGA device can vary by lot, tray quantity, and traceability requirements. The quote request should state the required quantity, acceptable date code, and whether an unopened, traceable tray is mandatory.
Where can I buy AD6623ABC?
Use the Request a Quote form on this page to request AD6623ABC pricing, availability, and lead time. Include the desired quantity, tray or reel preference, traceability requirements, target date code, and delivery location in the request. This approach provides a traceable quotation for the exact 196-pin CSP-BGA ordering code without relying on a generic family-level listing.
What is the price of AD6623ABC?
The current AD6623ABC price depends on quantity, availability, date code, and inspection requirements and is not represented by a static catalog amount. Submit a Request a Quote form on this page with the required quantity and traceability criteria to obtain a current quotation. Because this is an older CSP-BGA device, condition, storage history, and lot continuity may influence the commercial offer.
What design constraints matter most for the AD6623ABC CSP-BGA layout?
The AD6623ABC layout must accommodate a 196-ball CSP-BGA with high-speed digital interconnects to the baseband DSP and TxDAC. Place input, output, clock, and power connections according to the manufacturer datasheet, keep critical routes short, and provide low-impedance power and ground planes. The datasheet's thermal-management section is also important because sustained transmit operation can create substantial local heating beneath the ball-grid-array package.
Does AD6623ABC meet RoHS, REACH, and automotive qualification requirements?
The RoHS, REACH, lead-free, and AEC-Q100 status of AD6623ABC must be confirmed against current manufacturer documentation or a formal supplier declaration. The device data sheet shown by Analog Devices is Rev. A from 03/01/2002, which predates several modern material-compliance regimes. For regulated production, request the applicable declarations and do not infer qualification from the date or package type.

داتای سەرچاوەی ئەندازیاری بۆ AD6623ABC — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose AD6623ABC when a TxDAC-based transmitter requires the confirmed 4-channel, 104 MSPS Transmit Signal Processor architecture and digital IF signal generation. Its AD6622-compatible control-register mode is valuable when upgrading an AD6622 platform, because existing register-oriented software can be reused after interface, timing, and thermal checks. Select AD6623ABCZ only after confirming the suffix-specific grade and environmental requirements. Consider AD6622ABC or AD6622ABCZ when the existing AD6622 design already satisfies the required filtering, interpolation, channel, and throughput requirements. Do not select package variants with different pin counts for a drop-in conversion. Before any replacement, verify supply rails, clock frequency, data-interface timing, reset behavior, exposed-pad connections, and PCB thermal performance against the manufacturer datasheet.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە AD6623ABCZ AD6622ABC AD6622ABCZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 196-pin CSP-BGA 196-pin CSP-BGA 196-pin CSP-BGA 196-pin CSP-BGA
Device Type 4-channel Transmit Signal Processor 4-channel Transmit Signal Processor Digital IF transmit signal processor Digital IF transmit signal processor
Control-Register Compatibility AD6622-compatible mode AD6622-compatible mode Native AD6622 architecture Native AD6622 architecture
Pin Compatibility Compatible with AD6622 Compatible with AD6622 AD6622 device AD6622 device
Signal Path Baseband DSP data to high-bandwidth TxDAC data Baseband DSP data to high-bandwidth TxDAC data Digital IF transmit processing Digital IF transmit processing

جیاکەرەوە سەرەکییەکان

  • Four-channel 104 MSPS transmit-processing architecture (بەراورد بەAD6622ABC)
  • AD6622-compatible control-register mode (بەراورد بەAD6622ABCZ)
  • Pin-compatible migration within the same CSP-BGA footprint (بەراورد بەAD6622ABC)

تێبینییەکانی دیزاین

Place the 196-pin CSP-BGA according to the manufacturer package drawing and route clock, data, power, and ground connections using the pin-description table. High-speed interfaces should be kept short and referenced to a continuous return path. Avoid adding test-point or routing changes that interrupt the recommended BGA escape pattern, and verify every ball location against the CSP-BGA footprint used by the PCB library.

Apply the thermal-management procedure in the Analog Devices datasheet because the AD6623 combines a large CSP-BGA footprint with a 104 MSPS digital transmit processor. Provide uninterrupted ground-plane area beneath the package and distribute power connections across the specified balls. Validate junction temperature at the highest sustained channel activity and ambient temperature; do not infer thermal performance from the package name or from a generic BGA land-pattern calculation.

Do not treat AD6622 as an automatic substitute solely because the manufacturer identifies pin and control-register compatibility. Confirm the exact suffix, package, temperature grade, supply voltage, clock rate, interface timing, reset behavior, and required control-register implementation. An AD6623 package option with a different lead count or ball arrangement is not a drop-in replacement and requires a PCB redesign.

Preserve the integrity of the digital IF data path between the baseband DSP, AD6623, and TxDAC. Use the manufacturer's recommended clock distribution and interface topology, control edge rates at the source, and account for connector or package-transition discontinuities when the design is evaluated. Clock phase, data timing margin, interpolation latency, and gain-control settling must be verified with realistic stimulus and operating conditions.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The identified manufacturer data sheet is Rev. A dated 03/01/2002 and does not provide current material-compliance or automotive-qualification declarations in the retrieved text. Current manufacturer or supplier documentation is required for production qualification.

داتا پشتڕاستکراوەتەوە لە: 2026-11-18 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

AD6623ABC datasheet AD6623ABC pinout AD6623ABC datasheet pdf AD6623ABC specifications AD6623ABC 196 pin CSP BGA AD6623ABC 104 MSPS AD6623ABC equivalent AD6623ABC replacement AD6623ABC vs AD6622 AD6623ABC TxDAC transmitter Analog Devices AD6623ABC AD6623ABC price AD6623ABC stock AD6623ABC lead time

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices AD6623ABC AD6623ABCZ AD6622ABC AD6622ABCZ AD6622 Transmit Signal Processor TSP Digital Signal Processor DSP TxDAC digital IF signal processing digital-to-analog converter 196-pin CSP-BGA CSP-BGA ball grid array surface-mount semiconductor 104 MSPS four-channel signal processing baseband data interpolation filtering pin-compatible replacement communications transmitter
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ