ئاگاداری دوایین کڕین: AD876AR نزیکە لە کۆتایی ژیان. دوایین ڕێکەوتی داواکاری: پەیوەندیمان پێوە بکە. بینینی بەشە جێگرەوە بەردەستەکان →
Analog Devices

AD876AR - 10-Bit 20 MSPS 160 mW CMOS ADC | Analog Devices

MPN: AD876AR ⚠ کۆتا کڕین
+5 V single supply Vdss 200 ohm or less Rds(on)
MOQ: 1 |

AD876AR گشتی

The Analog Devices AD876AR is a 10-bit, 20 MSPS CMOS analog-to-digital converter (ADC) designed for high-speed signal acquisition. It consumes 160 mW, includes an on-chip input sample-and-hold amplifier, and supports +5 V single-supply operation. The device also provides standby power-down, three-state digital outputs, and a layout path for designs initially evaluated at 8-bit resolution before migration to 10-bit performance.

An ADC converts an analog input voltage into a digital code for processing by a microcontroller, DSP, FPGA, or other digital logic. The AD876 belongs to the converter hierarchy of ADC, data-converter IC, and mixed-signal semiconductor. Its 20 MSPS sampling rate allows roughly 10 million analog samples to be captured each second, making it suitable for waveform measurement, communication receivers, industrial monitoring, and digital control loops.

The AD876's principal verified characteristics are 10-bit resolution, a 20 MSPS conversion rate, and 160 mW power dissipation. Its on-chip sample-and-hold amplifier reduces the external analog front-end complexity required for repetitive sampling. Digital input and output functions can enter three-state mode, while the power-down feature allows the converter to reduce activity when acquisition is temporarily unnecessary.

The CMOS implementation supports +5 V single-supply operation, and the architecture also provides a pin-compatible upgrade path from an 8-bit layout to the 10-bit AD876 configuration. Guaranteed no-missing-codes operation and a differential nonlinearity specification of 0.5 LSB are important considerations when the converter is used to preserve small changes in the captured signal. The sampling architecture makes bandwidth and settling behavior central to front-end design.

Typical applications include sampled waveform acquisition, communications and demodulation front ends, industrial process monitoring, medical instrumentation, and embedded signal-processing systems. A 20 MSPS rate is particularly useful when the system must sample substantially faster than its display or processing update rate. The 10-bit result provides 1,024 digital codes, while the three-state digital interface can simplify bus sharing when properly controlled.

Design the analog input path carefully because performance depends on source impedance, signal bandwidth, and the 200 Ω or lower series-resistor recommendation in the manufacturer datasheet. For applications below 10 MHz of signal bandwidth, the datasheet permits increasing the series resistance proportionally. Use the manufacturer's pin and package information when planning PCB routing, grounding, decoupling, and data-interface connections.

This product page consolidates the verified device identity, conversion specifications, lifecycle position, source links, selection guidance, and engineering-focused design notes. It also distinguishes confirmed drop-in alternatives from package or resolution variants, helping engineers verify footprint compatibility and sourcing constraints before committing a layout.

جێگرەوەکانی جێگۆڕکێ بۆ AD876AR — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ AD876AR (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Power-Down Mode.

Analog Devices
Power-Down Mode: Standby mode
بەراوردکردن لەگەڵ AD876AR →

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

AD876AR زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Converter Type 10-bit CMOS sampling analog-to-digital converter
وردی 10 bit
ڕێژەی نموونەگرتن 20 MSPS
Power Dissipation 160 mW
Input Sample-and-Hold Amplifier On-chip
Supply Configuration +5 V single supply
Differential Nonlinearity 0.5 LSB guaranteed
Missing Codes No missing codes guaranteed
Power-Down Mode Standby
Digital Output Control Three-state
Resolution Upgrade Path 8-bit layout to 10-bit implementation
Input Series Resistance Recommendation 200 ohm or less
Signal Bandwidth Guidance Below 10 MHz permits proportionally increased series resistance
Technology CMOS
دۆخی چرخەی ژیان Last time buy

ڕێنمایی ڕێکخستنی پینی AD876AR standard

ڕێکخستنی پین بۆ AD876AR (پاکێجی standard). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی standard بۆ AD876AR

هیچ داتای وردی پینئاوت بەردەست نییە بۆ AD876AR.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

AD876AR گونجاوە بۆ 6 بەکارھێنانs: High-Speed Waveform Acquisition, Communications Signal Front End, Industrial Process Monitoring, Medical Signal Monitoring, Embedded Digital Control, Test and Measurement Equipment.

📈

High-Speed Waveform Acquisition

The AD876AR fits sampled waveform acquisition where a 20 MSPS conversion rate is sufficient and 10-bit resolution provides 1,024 output codes per conversion. Its on-chip sample-and-hold amplifier simplifies the input stage, while the 160 mW power dissipation supports compact instrumentation. Design the source path around the manufacturer datasheet recommendation of 200 Ω or less for full performance, and use a quiet ground reference to prevent digital coupling from distorting captured waveforms.

🌐

Communications Signal Front End

The AD876AR can serve as the sampling ADC ahead of a communications receiver or digital demodulator when the carrier or IF bandwidth can be represented by a 20 MSPS conversion rate. The 10-bit output offers 1,024 codes, and three-state digital outputs support controlled interface sharing. Preserve converter accuracy by maintaining a low-impedance analog source, applying the recommended input resistance, and routing converter and logic returns carefully to limit switching-noise coupling.

🏭

Industrial Process Monitoring

The AD876AR is suitable for industrial monitoring systems that sample changing sensor outputs at up to 20 MSPS. Its CMOS implementation, +5 V single-supply operation, standby mode, and 160 mW power level make it appropriate for compact data-acquisition modules. Use the guaranteed 0.5 LSB differential nonlinearity and no-missing-codes characteristics as key selection criteria, and isolate sensitive analog traces from digital switching paths on the PCB.

💊

Medical Signal Monitoring

The AD876AR can support sampled biomedical monitoring front ends when the required resolution and bandwidth are compatible with its 10-bit, 20 MSPS capability. Its integrated sample-and-hold amplifier reduces the number of external analog stages, and the three-state digital interface can assist bus-oriented designs. Validate signal-chain gain, input limits, isolation, and noise performance for the intended measurement rather than assuming general-purpose converter specifications satisfy clinical requirements.

🔧

Embedded Digital Control

The AD876AR can feed a DSP, FPGA, or embedded controller with digitized control-loop data at up to 20 MSPS. Its 10-bit interface provides a straightforward connection to parallel processing logic, while standby mode can reduce consumption when continuous conversion is unnecessary. Ensure the digital timing margin is adequate at the intended clock rate and that the analog input settles before each sampling instant.

🖥️

Test and Measurement Equipment

The AD876AR is appropriate for compact bench and portable test equipment that needs repeated sampling rather than ultra-high-resolution conversion. The 20 MSPS rate supports capture of fast events, and the 160 mW operating power supports space- and energy-conscious designs. Use the three-state output control deliberately when multiple devices share a data bus, and verify acquisition timing, input bandwidth, and connector protection in the complete instrument.

کورتەی بەرهەمە پێشنیارکراوەکان

AD876 AD876 family device بەکارهێنراوە لە: High-Speed Waveform Acquisition, Communications Signal Front End, Industrial Process Monitoring, Medical Signal Monitoring, Embedded Digital Control, Test and Measurement Equipment AD876AR Analog Devices بەکارهێنراوە لە: High-Speed Waveform Acquisition, Communications Signal Front End, Industrial Process Monitoring, Medical Signal Monitoring, Embedded Digital Control, Test and Measurement Equipment
What is the AD876AR?
The AD876AR is a 10-bit, 20 MSPS CMOS sampling analog-to-digital converter from Analog Devices. It consumes 160 mW and includes an on-chip input sample-and-hold amplifier. According to the AD876 manufacturer datasheet, the device also supports +5 V single-supply operation, guaranteed no-missing-codes performance, standby power-down, and three-state digital outputs, making it suitable for compact high-speed signal-acquisition systems.
What are the key specifications of AD876AR that engineers should know?
The key AD876AR specifications are 10-bit resolution, a 20 MSPS sampling rate, 160 mW power dissipation, and an on-chip sample-and-hold amplifier. The AD876 manufacturer datasheet also identifies +5 V single-supply operation, 0.5 LSB guaranteed differential nonlinearity, no missing codes, standby mode, and three-state digital outputs. Together, these characteristics define its suitability for sampled waveform, communications, and industrial signal-acquisition designs.
What is the conversion rate of AD876AR?
The AD876AR performs up to 20 million analog-to-digital conversions per second, or 20 MSPS. This sampling rate supports acquisition of rapidly changing signals while retaining a 10-bit result with 1,024 possible output codes. According to the AD876 manufacturer datasheet, applications with signal bandwidth below 10 MHz can use a proportionally larger source series resistance, while preserving the recommended 200 Ω or lower value for full-bandwidth operation.
Where can I download the AD876AR datasheet PDF?
The official AD876AR datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD876.pdf. The manufacturer datasheet covers the converter architecture, electrical characteristics, timing information, pin assignments, and application guidance. It also states that the input series resistor should be limited to 200 Ω or less to maintain the performance outlined in the performance specifications.
Where can I find the AD876AR pinout?
The AD876AR pin assignment and package outline are shown in the AD876 manufacturer datasheet at https://www.analog.com/media/en/technical-documentation/data-sheets/AD876.pdf. Use the pin-description table and package drawing for PCB layout, including supply connections, analog input routing, digital data lines, control pins, and ground returns. The exact package drawing must also be matched against the selected AD876AR ordering configuration before fabrication.
Does AD876AR support single-supply operation?
Yes, the AD876AR supports +5 V single-supply operation. The AD876 manufacturer datasheet identifies the CMOS converter as operating from a single +5 V supply, which can simplify analog and digital power planning compared with a dual-rail implementation. The supply pins still require careful bypassing, and signal amplitudes must remain within the converter's specified input range. Refer to the datasheet for the exact analog and digital input limits.
What is the difference between AD876AR and AD876JR?
AD876AR and AD876JR identify ordering configurations of the Analog Devices AD876 family, but the verified comparison does not establish that they share the same PCB footprint. Both are associated with the 10-bit, 20 MSPS CMOS converter family, so functional equivalence does not by itself prove drop-in compatibility. Check each part's package drawing, pin numbering, temperature grade, and lead configuration in the manufacturer documentation before replacing one ordering code with the other.
Is AD876AR suitable for waveform and communications measurement?
Yes, the AD876AR is suitable for sampled waveform and communications measurement when the required bandwidth and conversion rate fit the device specifications. Its 20 MSPS sampling rate and 10-bit resolution are useful for capturing changing analog signals, while the on-chip sample-and-hold amplifier reduces front-end complexity. According to the AD876 manufacturer datasheet, differential nonlinearity is guaranteed at 0.5 LSB and no missing codes are guaranteed.
When should I choose AD876AR over a higher-resolution ADC?
Choose the AD876AR when 10-bit resolution and a 20 MSPS sampling rate satisfy the measurement bandwidth and required code resolution. Its 160 mW power dissipation and integrated sample-and-hold amplifier can simplify compact designs. Select a higher-resolution converter when quantization error must be materially smaller than the 10-bit, 1,024-code scale, or when the application requires conversion rates, analog input ranges, or interface features not provided by the AD876.
What can replace the AD876AR?
No verified drop-in replacement for the AD876AR was identified in the available cross-reference results. A functional converter with the same resolution and sampling rate is not automatically a drop-in replacement because package dimensions, pinout, supply arrangement, timing, and control signals must also match. The AD876 family includes an 8-bit pin-compatible layout option, but changing resolution also changes the digital interpretation and must be treated as a deliberate design decision rather than an automatic substitution.
Is there an AD876AR equivalent from another manufacturer?
No cross-manufacturer equivalent with verified package and pin compatibility was established for the AD876AR. Cross-reference search pages can identify parametrically similar ADC families, but a true drop-in candidate must also use the same footprint and pin arrangement and meet the application's voltage, timing, resolution, and power requirements. Request a Quote on this page for lifecycle-aware sourcing assistance, and require the manufacturer to confirm pin compatibility before substituting a cross-brand part.
Where can I buy AD876AR online?
Use the Request a Quote form on this page to request AD876AR availability, current lifecycle status, and order handling. Analog Devices lists the AD876 family as last time buy, so supply should be treated as constrained rather than assumed to be continuously replenished. Confirm the exact AD876AR ordering code, package configuration, quantity, and acceptable delivery schedule before issuing a production purchase order.
What is the price of AD876AR?
Current AD876AR pricing depends on quantity, package configuration, and remaining lifecycle inventory. Use the Request a Quote form on this page for a current quotation rather than relying on a static listing value. Because the AD876 family is marked last time buy, buyers should request both price and lead time together and consider whether an approved alternate design or obsolete-part risk-control plan is needed.
What is the lead time and stock status for AD876AR?
AD876AR stock and lead time should be confirmed through the Request a Quote form on this page because no current quantity-break inventory table was available. Analog Devices lists the AD876 family as last time buy, which indicates constrained ongoing availability. Request the current on-hand quantity, scheduled delivery, minimum order quantity, and permitted date codes when placing an order, especially for production builds that cannot tolerate a line stoppage.
How should the AD876AR analog input network be designed?
The AD876AR analog input should use a low-impedance source and follow the manufacturer's series-resistance guidance. According to the AD876 manufacturer datasheet, the resistor should be limited to 200 Ω or less to maintain the specified performance; for signal bandwidths below 10 MHz, the resistor may be increased proportionally. Keep the input trace short, provide local supply bypassing, and use a quiet return path to reduce switching and digital-crosstalk errors.

داتای سەرچاوەی ئەندازیاری بۆ AD876AR — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the AD876AR when the design requires a 10-bit, 20 MSPS CMOS ADC with an integrated sample-and-hold amplifier, +5 V single-supply operation, and a compact 160 mW power level. It is well matched to sampled waveform acquisition, communications front ends, industrial monitoring, and embedded control systems where 1,024 output codes provide adequate resolution. Consider the documented 8-bit layout path when an early prototype needs a resolution upgrade, but remember that the functional benefit requires deliberate firmware and system changes. A cross-brand replacement should not be selected solely because its resolution and sampling rate are similar; package, pins, voltage levels, timing, and acquisition characteristics must be verified. Because the AD876 family is last time buy, obtain a current quotation and delivery commitment before committing to new production volumes, and consider whether a currently active ADC family would reduce supply risk if the board can be redesigned.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە
Brand Analog Devices
Resolution 10 bit
Sampling Rate 20 MSPS
Power Dissipation 160 mW
Supply Configuration +5 V single supply
Input Sample-and-Hold Amplifier On-chip
Differential Nonlinearity 0.5 LSB guaranteed
Digital Output Control Three-state
Lifecycle Status Last time buy

جیاکەرەوە سەرەکییەکان

  • Integrated sampling front end reduces external circuitry (بەراورد بەAD876JR)
  • Compact power dissipation for a 20 MSPS converter (بەراورد بەAD876 family)
  • Single-supply and flexible digital bus behavior (بەراورد بەAD876 8-bit layout option)

تێبینییەکانی دیزاین

Use a low-impedance analog source and limit the input series resistor to 200 Ω or less when preserving the performance specified in the AD876 manufacturer datasheet. For signal bandwidth below 10 MHz, the datasheet permits increasing resistance proportionally. Keep the input trace short, place the source close to the converter, and provide a quiet ground return to minimize acquisition error and digital crosstalk.

Separate analog input routing from digital clock, data, and control traces. Place local supply-decoupling components at the appropriate power pins and use a compact, low-loop ground strategy around the converter. Because the AD876 includes an on-chip sample-and-hold amplifier, the external source impedance and PCB parasitics directly affect settling, so prototype the complete input network rather than evaluating the ADC on an ideal source.

Do not treat a family member or similarly rated ADC as a drop-in replacement without verifying package dimensions, pin numbering, supply connections, control timing, and signal levels. The AD876 family includes an 8-bit-compatible layout path, but operating that path at 8 bits changes the usable digital resolution. Also account for the last-time-buy lifecycle position before starting a new production design that cannot tolerate limited availability.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

No verified environmental or automotive compliance statements were identified for this ordering code. AD876AR is a general-purpose mixed-signal converter rather than an automotive-qualified device.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

AD876AR datasheet AD876AR datasheet pdf AD876AR pinout AD876AR specifications AD876AR 20 MSPS ADC AD876AR 10 bit ADC AD876AR equivalent AD876AR replacement AD876AR drop-in substitute AD876AR application circuit AD876AR price AD876AR stock Analog Devices AD876AR AD876AR vs AD876JR AD876AR waveform acquisition

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices AD876AR AD876 AD876JR 10-bit ADC 20 MSPS analog-to-digital converter data converter mixed-signal IC CMOS sample-and-hold amplifier differential nonlinearity no missing codes power-down mode standby mode three-state output single-supply operation waveform acquisition communications front end industrial process monitoring medical signal monitoring embedded digital control test and measurement equipment
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ