AD9002BD - 150 MSPS 8-Bit High-Speed ADC | Analog Devices
MPN: AD9002BD ✗ کۆتایی ژیانAD9002BD گشتی
An ADC is a data-acquisition IC that converts an analog voltage into a digital code for processing, storage, measurement, or transmission. ADCs form one branch of the broader semiconductor hierarchy, alongside DACs, interface ICs, and clock-and-timing devices. The AD9002 architecture prioritizes sampling speed and input bandwidth, making it suitable for capturing rapidly changing signals rather than low-rate precision measurements.
The AD9002 uses 256 parallel comparator stages whose outputs are decoded into ECL-compatible output latches. This parallel-processing approach avoids the speed limitations associated with a purely sequential conversion cycle. Its 17 pF input capacitance helps simplify source and sampling-circuit design, while operation above 150 megasamples per second supports demanding waveform, radar, and test-equipment applications.
The converter is fabricated using an advanced bipolar process. According to the manufacturer product description, the device also offers an exceptionally wide large-signal analog input range. Its -5.2 V single-supply arrangement is important at the board level because the digital output interface and analog input reference must be biased consistently within the device's specified operating conditions.
Typical uses include radar systems, digital oscilloscopes, automatic test equipment, laser and radar warning receivers, digital radio, and electronic instrumentation. In each case, the principal benefit is the ability to sample high-frequency analog waveforms at rates above 150 MSPS and retain an 8-bit digital representation for downstream analysis.
A successful design must provide stable analog and logic supply rails, suitable input drive, and compatible ECL-interface termination. Because the AD9002BD uses a 28-pin ceramic DIP package rather than a fine-pitch surface-mount package, it is particularly suited to prototypes, legacy test systems, and applications where socketed or through-hole assembly is preferred. Designers should consult the manufacturer datasheet for the exact pin assignments, timing definitions, input-range limits, and output coding before laying out the PCB.
This page combines the manufacturer's core architecture and performance information with application guidance, selection considerations, and practical design notes. It also distinguishes documented capabilities from specifications that require confirmation for a specific operating condition or replacement decision.
جێگرەوەکانی جێگۆڕکێ بۆ AD9002BD — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ AD9002BD (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Output Interface, Package Type, Resolution, Supply Voltage.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەAD9002BD زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Converter Type | High-speed monolithic analog-to-digital converter |
| وردی | 8 bit |
| Maximum Sampling Rate | Over 150 MSPS |
| توانای ئینپوت | 17 pF |
| ڤۆڵتیەی دابینکردن | -5.2 V single supply |
| Process Technology | Advanced bipolar process |
| Comparator Stage Count | 256 parallel stages |
| Output Interface | ECL-compatible output latches |
| Package Type | 28-pin ceramic dual in-line package |
| Package Designation | 28-CDIP |
| جۆری دامەزراندن | Through-hole |
| Sampling Architecture | Flash-type parallel conversion |
| Input Signal Type | Single-ended analog input |
| MIL-STD-883 Version | Compliant versions available |
ڕێنمایی ڕێکخستنی پینی AD9002BD 28-cdip
ڕێکخستنی پین بۆ AD9002BD (پاکێجی 28-cdip). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ AD9002BD.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
AD9002BD گونجاوە بۆ 6 بەکارھێنانs: Radar Signal Acquisition, Digital Oscilloscope Front End, Automatic Test Equipment, Radar Warning Receivers, Digital Radio Equipment, High-Speed Electronic Instrumentation.
Radar Signal Acquisition
The AD9002BD fits radar receivers that must sample high-bandwidth return signals while retaining an 8-bit digital representation. Its operation above 150 MSPS reduces the interval between samples, while the 256-stage parallel architecture supports rapid conversion. The 17 pF input capacitance should be included when selecting the amplifier, filter, and termination network. The ECL-compatible outputs also suit legacy radar processing systems built around high-speed ECL logic, provided clocking, voltage levels, and grounding follow the manufacturer requirements.
پێشنیارکراو
Digital Oscilloscope Front End
The AD9002BD can serve as the acquisition ADC in a digital oscilloscope or waveform-measurement instrument. Sampling above 150 MSPS makes it appropriate for repetitive or high-frequency signal capture, while the 8-bit resolution provides a compact digital code for display and storage. The front-end design must deliver adequate input bandwidth and stable drive into 17 pF. Board layout should minimize loop area, isolate analog input routing from ECL clock and output paths, and establish clean supply returns before evaluating acquisition fidelity.
پێشنیارکراو
Automatic Test Equipment
The AD9002BD is applicable to automatic test equipment that must measure rapidly changing analog nodes with digital sampling. Its greater-than-150-MSPS operation can capture short events and high-frequency test responses, while the parallel comparator architecture supports high throughput across repeated measurements. The -5.2 V supply and ECL-compatible interface require a deliberate power and termination strategy. Instrument designers should account for 17 pF input capacitance when setting source impedance and amplifier gain, and verify acquisition timing against the test system clock.
پێشنیارکراو
Radar Warning Receivers
The AD9002BD suits laser or radar warning receivers in which an incoming high-frequency signal must be sampled for detection and processing. The documented sampling rate above 150 MSPS supports rapid observation of the received waveform, and the 17 pF input capacitance helps constrain loading at the converter. Its ECL-compatible outputs are particularly relevant to established high-speed receiver architectures. The analog front end should still provide the required bandwidth, amplitude range, and signal conditioning because the ADC does not replace the receiver's filtering or detection chain.
پێشنیارکراو
Digital Radio Equipment
The AD9002BD can be used in digital radio equipment where an analog waveform must be converted quickly for demodulation or downstream digital processing. Its 8-bit flash-style architecture and operation above 150 MSPS make it suitable for systems that prioritize conversion speed and parallel digital delivery. The -5.2 V single-supply requirement and ECL-compatible outputs influence the surrounding logic design. Designers should use short, controlled input paths and confirm whether the radio architecture requires the converter's available dynamic range, timing, and output-code format.
پێشنیارکراو
High-Speed Electronic Instrumentation
The AD9002BD supports laboratory and industrial instruments that acquire high-frequency analog events for display, analysis, or recording. Its 8-bit resolution offers a straightforward digital interface, while operation above 150 MSPS provides temporal resolution for rapidly varying signals. The 28-CDIP format is useful for legacy instrumentation and socketed prototypes, though it occupies more board area than a fine-pitch surface-mount package. System designers should allocate stable supply rails, proper ECL termination, clock distribution, and a ground-return strategy that keeps converter noise away from the sensitive input stage.
پێشنیارکراو
داتای سەرچاوەی ئەندازیاری بۆ AD9002BD — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
تێبینییەکانی دیزاین
Route the analog input as a short, controlled-impedance trace directly to the converter and keep the 17 pF input capacitance in the source-driver calculation. Place the input network close to the device, avoid sharing return paths with digital output and clock traces, and use a solid uninterrupted ground plane. This separation is especially important in radar, oscilloscope, and warning-receiver front ends where the sampled signal may contain significant high-frequency content.
Design the -5.2 V supply and ECL-compatible interface as a coordinated logic-power system. Use low-impedance decoupling at the converter supply pins, maintain a continuous return path, and terminate the ECL outputs according to the receiving logic's requirements. Because a converter can produce high-frequency current transitions, test supply ripple and ground bounce at the pins rather than relying only on a board-level supply reading.
Treat the sampling clock as a high-speed signal: provide a low-jitter source, use controlled-impedance routing, and avoid introducing unnecessary stubs or long branches. Keep the clock path physically separated from the analog input to reduce conversion-node coupling. If timing margin is limited, evaluate the complete source, clock, converter, and output-loading chain against the manufacturer timing definitions before enabling full-rate operation.
Do not substitute the AD9002BD solely because another AD9002-family device has the same resolution and headline sampling rate. Confirm the physical package, pin assignment, temperature grade, supply arrangement, ECL output levels, output coding, and timing behavior. The 28-CDIP format also requires adequate board spacing, socket or insertion clearance, and mechanical support to avoid package stress during soldering or replacement.
زانیاری پابەندبوون
MIL-STD-883 compliant versions are available according to the AD9002BD datasheet description. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated.