AD9226ASTRL - 12-Bit 65 MSPS ADC | Analog Devices
MPN: AD9226ASTRL ✓ چالاکAD9226ASTRL گشتی
An ADC is a data-conversion IC that transforms an analog voltage into a numeric code for processing by an FPGA, DSP, microcontroller, or other digital logic. The AD9226 belongs to the pipeline ADC family within the broader ADC and data-converter hierarchy. Its multistage differential pipeline architecture samples continuously at 65 MSPS, while the integrated sample-and-hold amplifier reduces the external component count required at the analog input. The parallel interface exposes the converted data directly to digital circuitry rather than relying on a high-speed serial link.
Key device characteristics include 12-bit resolution, a 65 MSPS data rate, one analog input, and a differential pipeline architecture. The integrated high-performance sample-and-hold amplifier is specifically suited to IF undersampling schemes, including single-channel communication applications operating at input frequencies up to and beyond the Nyquist rate. Published distributor information also reports 11.1 bits ENOB at a 10 MHz input frequency and approximately -75 dBFS intermodulation distortion at a 140 MHz input frequency.
The converter's monolithic implementation combines the sampling front end, pipeline stages, digital correction logic, and voltage-reference options in one package. The manufacturer datasheet describes internal reference-voltage configurations that can generate reference levels between 1 V and 2 V, as well as an external-reference option for designs requiring enhanced accuracy or drift performance. Because it uses a differential pipeline architecture, board-level implementation must preserve controlled impedance, symmetrical routing, and clean separation between analog and digital return paths.
Typical uses include digital oscilloscopes, communications receivers, IF-sampling front ends, radar and signal-processing systems, industrial measurement equipment, and laboratory instrumentation. At 65 MSPS, the device can capture substantially faster waveforms than low-speed general-purpose ADCs while retaining 12-bit resolution. It is also appropriate where undersampling allows a band-limited RF signal to be converted directly without first downconverting it to baseband.
The primary design consideration is analog-input implementation. The AD9226 offers internal and external reference options, but the selected mode affects accuracy, drift, and circuit complexity. Designers should also account for input bandwidth, output timing, parallel-bus skew, supply decoupling, and the difference between analog and digital signal integrity when laying out a 48-LQFP PCB.
This page combines verified manufacturer and distributor information with application guidance, interface considerations, and a conservative replacement analysis. It distinguishes documented AD9226 family options from unsupported cross-package substitutes and explicitly identifies data that requires confirmation from the datasheet or current distributor inventory.
جێگرەوەکانی جێگۆڕکێ بۆ AD9226ASTRL — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ AD9226ASTRL (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Operating Temperature, Input Frequency Support, Intermodulation Distortion, RoHS Status.
AD9226ASTZRL
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →AD9226BSTZRL
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
AD9226CSTZRL
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
AD9226ASTRL زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| وردی | 12 bit |
| ڕێژەی نموونەگرتن | 65 MSPS |
| Analog Input Count | 1 input |
| Architecture | Multistage differential pipeline |
| Converter Type | Pipelined ADC |
| ڤۆڵتیەی دابینکردن | 5 V nominal |
| پلەی گەرمیی کارکردن | -40°C to +85°C |
| پاکێج | 48-LQFP, 7 x 7 mm |
| Data Interface | Parallel |
| Package Code | LFQFP |
| شێوازی دامەزراندن | Surface mount |
| Terminal Count | 48 terminals |
| Packaging | Tape and reel |
| Integrated Circuits | On-chip sample-and-hold amplifier and voltage reference |
| ENOB | 11.1 bit at fIN = 10 MHz |
| Intermodulation Distortion | -75 dBFS at fIN = 140 MHz |
| Input Frequency Support | Up to and well beyond Nyquist frequencies for IF undersampling |
| Internal Reference Output Range | 1 V to 2 V |
ڕێنمایی ڕێکخستنی پینی AD9226ASTRL lfqfp
ڕێکخستنی پین بۆ AD9226ASTRL (پاکێجی lfqfp). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ AD9226ASTRL.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
AD9226ASTRL گونجاوە بۆ 6 بەکارھێنانs: Communications IF Receiver, Digital Oscilloscope Front End, RF and IF Undersampling, Industrial Signal Analysis, Radar and Signal Processing, Laboratory Measurement Equipment.
Communications IF Receiver
The AD9226ASTRL is well suited to communications IF reception because its 12-bit conversion resolution and 65 MSPS sampling rate support direct capture of intermediate-frequency signals. According to the Analog Devices datasheet, the integrated sample-and-hold amplifier is designed for IF undersampling, including single-channel communications applications operating at frequencies up to and beyond the Nyquist rate. The differential pipeline architecture provides a parallel output that can feed an FPGA or DSP without a serial deserializer. The principal design constraint is analog bandwidth: input filtering, gain, clock jitter, and board return paths must preserve the wanted IF band while limiting out-of-band energy that can create aliases.
پێشنیارکراو
Digital Oscilloscope Front End
The AD9226ASTRL can serve as the analog-to-digital front end of a high-speed digital oscilloscope because it samples at 65 MSPS with 12-bit resolution. Its on-chip sample-and-hold amplifier reduces the number of external input components, while the 48-LQFP package supports compact capture boards. Reported performance of 11.1-bit ENOB at a 10 MHz input provides a useful indication of effective conversion performance for moderate-frequency waveforms. For a practical oscilloscope design, the analog input path must include appropriate attenuation or amplification, and the acquisition FPGA must correctly capture the parallel bus while accounting for converter latency and clock timing.
پێشنیارکراو
RF and IF Undersampling
The AD9226ASTRL is appropriate for RF or IF undersampling when a band-limited signal can be captured without a conventional downconversion stage. The manufacturer specifically describes the sample-and-hold amplifier as suitable for IF undersampling in single-channel communication systems, including input frequencies at and beyond Nyquist. Its 65 MSPS sampling rate establishes the aliasing relationships that must be calculated for the selected input band. Engineers should design the anti-alias filter around both the wanted RF channel and unwanted out-of-band products, while maintaining controlled impedance from the analog input through the sample-and-hold network.
پێشنیارکراو
Industrial Signal Analysis
The AD9226ASTRL is suitable for industrial signal-analysis equipment that must capture transient or periodic waveforms at a substantially faster rate than general-purpose control ADCs. Its 12-bit resolution provides 4096 nominal output codes, while the 65 MSPS rate allows the converter to sample waveforms several times faster than the desired measurement bandwidth. The documented -40°C to +85°C operating range supports equipment intended for temperature-controlled industrial environments. Input conditioning remains important: transducer excitation, sensor noise, grounding, shielding, and isolation determine whether the converter's theoretical resolution can be preserved in the completed measurement system.
پێشنیارکراو
Radar and Signal Processing
The AD9226ASTRL can support radar, instrumentation, and general signal-processing front ends where 12-bit data at 65 MSPS provides a useful balance between resolution, conversion speed, and interface complexity. Its multistage differential pipeline architecture is designed for continuous high-rate conversion, and the parallel output can feed an FPGA fabric directly. Designers should use the manufacturer timing information to establish output latency and setup requirements, and should preserve a low-noise analog supply and reference network. If the processed result must cross a board boundary, an LVDS transmitter and receiver pair can reduce timing uncertainty compared with routing a wide parallel bus over long distances.
پێشنیارکراو
Laboratory Measurement Equipment
The AD9226ASTRL is suitable for laboratory instruments that need to capture repetitive waveforms while retaining 12-bit quantization. Its 65 MSPS sampling capability supports measurements beyond the bandwidth of many general-purpose ADCs, and the integrated sample-and-hold amplifier simplifies front-end implementation. A practical instrument still requires calibrated input attenuation, a stable reference strategy, and careful grounding to obtain repeatable measurements. The manufacturer supports internal reference configurations producing 1 V to 2 V and also describes external-reference use for enhanced accuracy or drift control, giving instrument designers a choice between simplicity and calibrated long-term stability.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ AD9226ASTRL — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | AD9226ASTZRL | AD9226BSTZRL | AD9226CSTZRL |
|---|---|---|---|---|
| Package | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) | 48-LQFP (7x7) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit |
| Sampling Rate | 65 MSPS | 65 MSPS | 65 MSPS | 65 MSPS |
| Architecture | Multistage differential pipeline | Multistage differential pipeline | Multistage differential pipeline | Multistage differential pipeline |
| Data Interface | Parallel | Parallel | Parallel | Parallel |
| Supply Voltage | 5 V nominal | 5 V nominal | 5 V nominal | 5 V nominal |
جیاکەرەوە سەرەکییەکان
- Same-package family substitution (بەراورد بەAD9226ASTZRL)
- Documented industrial temperature specification (بەراورد بەAD9226BSTZRL)
- Integrated sampling and reference functions (بەراورد بەAD9226CSTZRL)
تێبینییەکانی دیزاین
Treat the 12-bit parallel output as a timing-sensitive interface. Route the data and clock traces together with matched geometry, minimize stub lengths, and place the receiving FPGA or logic device close enough to limit degradation across the 48-LQFP package. Account for converter output delay, clock skew, receiver setup time, and PCB propagation delay in the acquisition pipeline. If the bus must extend beyond a short board region, an LVDS transmitter and receiver can provide a more robust differential transfer path.
Separate analog input, clock, digital output, and supply-return paths on the PCB. Place input-network and decoupling components adjacent to the relevant AD9226 pins, and use a quiet analog ground strategy that avoids carrying digital return currents beneath the converter. Keep the sample-and-hold input path short and controlled in impedance. The parallel output bus should not share routing geometry with the sensitive input network, particularly when high input frequencies make small parasitic effects more consequential.
Use the manufacturer datasheet's recommended analog and digital supply bypassing without substituting generic bulk-capacitor values. Verify local supply decoupling with an oscilloscope at the device pins because switching supply ripple can appear in the conversion result even when the nominal supply is 5 V. Reference choice also matters: the datasheet describes internal reference configurations producing 1 V to 2 V and an external-reference option for enhanced accuracy or drift performance, so the selected mode must match the accuracy requirement.
زانیاری پابەندبوون
The supplied excerpts do not provide explicit compliance declarations for the exact AD9226ASTRL order code. The Z designation in AD9226ASTZRL suggests a particular ordering convention, but it was not treated as proof of lead-free compliance without an explicit manufacturer statement.