AD977AN - 16-Bit 100 kSPS Serial SAR ADC | Analog Devices
MPN: AD977AN ✓ چالاکAD977AN گشتی
An ADC is a data-conversion IC that transforms an analog voltage into a numeric code for processing, storage, or transmission. The AD977AN belongs to the SAR ADC family, a subtype of data converters whose switched-capacitor conversion process provides accurate, direct conversion without the complexity of a pipeline converter. In the electronic-component hierarchy, it is a 16-bit ADC, then an analog-to-digital converter, data converter, and integrated circuit.
The principal features include 100 kSPS conversion throughput, one analog input, a serial interface, and factory calibration. According to the Analog Devices manufacturer datasheet, the AD977 supports unipolar input ranges of 0 V to 5 V and 0 V to 4 V, as well as bipolar ranges of plus or minus 5 V and plus or minus 3.3 V. A 5 V analog supply and a separate 2.5 V reference are identified as core operating characteristics.
The converter uses a factory-calibrated switched-capacitor SAR architecture. Its internal 2.5 V reference supports repeatable conversion behavior, while the serial output reduces the number of package pins required for transferring 16-bit results. The AD977AN dissipates no more than 100 mW, making it suitable for instrumentation where converter accuracy and power consumption must both be controlled. A power-down mode is also identified in the manufacturer documentation.
Typical uses include industrial process measurement, laboratory data acquisition, instrumentation, sensor-interface systems, and embedded measurement equipment where 16-bit resolution is useful but high conversion speed beyond 100 kSPS is unnecessary. The single-ended input architecture and serial interface can also simplify designs that already employ serial data acquisition buses.
When laying out a circuit, place the input, reference, and decoupling connections according to the manufacturer application guidance and minimize digital-clock crosstalk into the analog input path. Care is required when operating near the limits of the unipolar or bipolar input ranges because excessive input voltage can exceed the converter's permitted range. Check the complete input common-mode and source-impedance requirements before finalizing the analog front end.
This product record combines manufacturer specifications, distributor availability information, parameter-by-parameter family comparisons, and practical design guidance. It also distinguishes the exact AD977AN from related AD977A and suffix variants, helping engineers identify pin-compatible procurement options without confusing throughput, package, or temperature-grade differences.
جێگرەوەکانی جێگۆڕکێ بۆ AD977AN — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ AD977AN (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Supply Voltage, Converter Type, Throughput Rate.
AD977ANZ
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →AD977AN زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| وردی | 16 bit |
| Conversion Throughput | 100 kSPS |
| Analog Input Count | 1 input |
| Architecture | Successive-approximation switched-capacitor ADC |
| Process Technology | BiCMOS |
| ڤۆڵتیەی دابینکردن | 5 V |
| Internal Reference | 2.5 V |
| Unipolar Input Range 1 | 0 V to 5 V |
| Unipolar Input Range 2 | 0 V to 4 V |
| Bipolar Input Range 1 | -5 V to +5 V |
| Bipolar Input Range 2 | -3.3 V to +3.3 V |
| Maximum Power Dissipation | 100 mW |
| Power-Down Mode | Supported |
| Factory Calibration | Yes |
| ڕووکار | High-speed serial interface |
| پاکێج | 20-pin PDIP |
| جۆری دامەزراندن | Through-hole |
ڕێنمایی ڕێکخستنی پینی AD977AN 20-pin pdip
ڕێکخستنی پین بۆ AD977AN (پاکێجی 20-pin pdip). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ AD977AN.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
AD977AN گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Measurement, Laboratory Data Acquisition, Precision Sensor Signal Acquisition, Power and Energy Monitoring, Medical and Diagnostic Instrumentation, Embedded Serial Acquisition System.
Industrial Process Measurement
The AD977AN fits industrial process-measurement systems that require 16-bit resolution but do not need conversion rates above 100 kSPS. Its supported 0 V to 5 V and 0 V to 4 V unipolar ranges can accommodate suitably conditioned pressure, temperature, and level signals. Placing the converter behind an analog front end and anti-alias filter allows the 5 V supply and internal 2.5 V reference to support a compact measurement channel. The stated maximum power dissipation of 100 mW also limits thermal impact in multi-channel equipment. Designers should verify source impedance, settling time, and acquisition timing against the exact manufacturer application guidance before fixing the channel bandwidth.
پێشنیارکراو
Laboratory Data Acquisition
The AD977AN is appropriate for laboratory instruments that sample moderate-bandwidth analog signals at up to 100 kSPS. Its 16-bit resolution preserves fine amplitude detail in bench measurements, while the high-speed serial interface reduces parallel data routing. The single 5 V operating supply simplifies system partitioning, and the internal 2.5 V reference avoids a separate reference device in applications that do not require external calibration. A practical implementation should use a protected, low-noise analog front end and route the serial clock away from sensitive input nodes. Calibration records and input-range settings should also be stored because the converter is factory calibrated rather than infinitely precise.
پێشنیارکراو
Precision Sensor Signal Acquisition
The AD977AN can digitize conditioned outputs from precision sensors when the required sample rate is no greater than 100 kSPS. Its 16-bit SAR architecture and selectable 0 V to 5 V, 0 V to 4 V, plus or minus 5 V, or plus or minus 3.3 V input ranges provide flexibility for bridge amplifiers, transducers, and instrumentation amplifiers. The single 5 V supply simplifies sensor-interface power planning, while maximum power dissipation of 100 mW helps in densely populated multi-channel equipment. The analog signal path should still include input protection, source-impedance compensation, and an anti-alias network to prevent out-of-band energy from degrading conversion accuracy.
پێشنیارکراو
Power and Energy Monitoring
The AD977AN is suitable for monitoring slowly changing or moderate-bandwidth power-system signals in laboratory and industrial controllers. A scaled voltage or current signal can be conditioned into the converter's supported unipolar or bipolar ranges, and the 100 kSPS rate provides more temporal resolution than many slow monitoring systems require. The internal 2.5 V reference and single 5 V supply reduce the number of supporting components. For accurate results, the input network must maintain the required source impedance and account for switching-node noise through filtering. The serial interface also helps when measurements must be transferred to a controller without allocating a wide parallel bus.
پێشنیارکراو
Medical and Diagnostic Instrumentation
The AD977AN can serve in medical or diagnostic instrumentation when the selected channel operates within 100 kSPS and 16-bit resolution is adequate. Its multiple input ranges support bipolar physiological signals when appropriate isolation, protection, and amplification are provided, while the serial output simplifies connection to embedded processing hardware. The low stated power dissipation of 100 mW supports compact multi-channel systems. However, medical applications require system-level validation of leakage, isolation, safety, and signal integrity; component marketing information alone does not establish medical certification. The manufacturer datasheet and application guidance should govern input protection, grounding, and analog filtering.
پێشنیارکراو
Embedded Serial Acquisition System
The AD977AN is well suited to embedded systems that require accurate conversion but already use serial buses or controllers with serial peripherals. At 100 kSPS, it provides a 16-bit result stream without requiring the pin count of a parallel ADC. The single 5 V analog supply and internal 2.5 V reference can simplify power-tree design around an embedded controller. Engineers should budget interface timing for the serial clock and data signals, isolate the analog input from digital switching activity, and confirm that the controller's serial peripheral supports the converter's electrical interface. The 100 mW maximum power dissipation is also useful when estimating total thermal load across several acquisition channels.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ AD977AN — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | AD977ANZ |
|---|---|---|
| Package | 20-pin PDIP | 20-pin PDIP |
| Brand | Analog Devices | Analog Devices |
| Resolution | 16 bit | 16 bit |
| Architecture | Successive-approximation switched-capacitor ADC | Successive-approximation switched-capacitor ADC |
| Process Technology | BiCMOS | BiCMOS |
| Supply Voltage | 5 V | 5 V |
| Internal Reference | 2.5 V | 2.5 V |
| Analog Input Count | 1 input | 1 input |
| Maximum Power Dissipation | 100 mW | 100 mW |
| Interface | High-speed serial interface | High-speed serial interface |
جیاکەرەوە سەرەکییەکان
- Exact 100 kSPS AD977 configuration (بەراورد بەAD977ANZ)
- Single 5 V supply with internal reference (بەراورد بەAD977ANZ)
- Factory-calibrated 16-bit conversion (بەراورد بەAD977ANZ)
تێبینییەکانی دیزاین
Route the analog input directly to the AD977AN and keep it away from the serial clock and data traces. Place input-network components and bypass capacitors close to their associated pins, and use a continuous ground plane where practical. Because the verified data confirms a switched-capacitor SAR architecture but does not provide complete layout values, engineers should follow the official Analog Devices datasheet for the exact recommended topology and grounding arrangement.
Design the source impedance and acquisition filter around the ADC's acquisition-time and settling requirements rather than treating the input as infinitely fast. An anti-alias filter is necessary when out-of-band signals can reach the converter, and its transition band should preserve the required measurement bandwidth while attenuating switching or converter-clock energy. The verified material does not provide the permitted source-impedance limit, so obtain that value from the manufacturer datasheet before finalizing the input network.
Budget the AD977AN from its verified maximum dissipation of 100 mW and provide a clean single 5 V supply with local decoupling. The internal 2.5 V reference supports the conversion system, but analog and digital return currents should be managed so that switching current does not create voltage errors at the converter. Because the exact bypass capacitance and supply-current distribution are not included in the verified extract, use the values and decoupling guidance published in the official manufacturer datasheet.
زانیاری پابەندبوون
The supplied verified web data does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for AD977AN. AEC-Q100 is treated as not applicable because this is an Analog Devices data-conversion IC and no automotive qualification is identified.