Analog Devices

ADF4117BRUZ - 1.2 GHz Integer-N PLL | Analog Devices

MPN: ADF4117BRUZ ✓ چالاک
5.5 V Vdss 16-pin TSSOP, 0.173-inch (4.40 mm) width Package 1.2 GHz Speed
MOQ: 1 |

ADF4117BRUZ گشتی

Analog Devices ADF4117BRUZ is a single-channel, integer-N phase-locked-loop frequency synthesizer with a maximum RF input frequency of 1.2 GHz, a 100 MHz reference input range, and a 200 MHz output capability in a 16-pin TSSOP package. It combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a dual-modulus prescaler for flexible local-oscillator synthesis.

A phase-locked loop, or PLL, is a feedback-controlled timing circuit that locks an output frequency to a stable reference frequency. The ADF411x family belongs to the frequency synthesizer hierarchy, where integer-N PLL synthesizers convert a reference source into programmable RF local-oscillator signals for wireless receivers and transmitters. The architecture offers integer division of the phase-detector frequency while the dual-modulus prescaler supports fractional-equivalent programming behavior within the prescaler constraints.

The ADF4117 reaches a 1.2 GHz maximum RF frequency and operates from a 3 V system, with a 5.5 V maximum power-supply rating identified in the device documentation. Its programmable A and B counters, reference divider, and charge-pump output support adjustable synthesis ratios and tuning-voltage control. The part is identified as a single CMOS PLL with one synthesizer channel and one clock output function, making it suitable for compact RF signal-chain implementations.

Technically, the low-noise digital phase-frequency detector compares the divided feedback signal with the divided reference. The charge pump converts the phase error into current that controls the external loop filter and tuning voltage. The resulting voltage adjusts the VCO, while the prescaler and integer counters determine the synthesis ratio. Designers must account for loop bandwidth, reference phase noise, VCO noise, filter components, and settling time when planning the RF layout.

Typical uses include wireless receiver local oscillators, wireless transmitter upconversion and downconversion paths, radio equipment, and other RF systems requiring a programmable local oscillator. The device can also serve test and measurement front ends where a synthesized source is needed. Its 1.2 GHz ceiling gives it useful coverage for many RF communications bands while retaining the architecture and programming model of the wider ADF411x family.

The principal design consideration is the charge-pump and VCO loop. Keep the charge-pump trace short, place loop-filter components close to the relevant pins, maintain a clean return path, and separate sensitive reference and RF routes from switching or high-current circuitry. Confirm lock range, tuning range, reference-divider settings, and settling behavior using the manufacturer’s datasheet and evaluation hardware.

This product page combines the manufacturer’s ADF4117 information with package, sourcing, replacement, and design context. It identifies the verified electrical envelope, clarifies pin assignments, maps suitable RF applications, and identifies the practical limits of drop-in replacement choices for this specific 16-pin TSSOP device.

جێگرەوەکانی جێگۆڕکێ بۆ ADF4117BRUZ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADF4117BRUZ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Charge Pump, Package, A Counter, B Counter, Extended Temperature Grade.

Analog Devices
Charge Pump: Precision charge pump with selectable currents
Package: 16-TSSOP, 0.173 inch width, 4.40 mm width
A Counter: 5-bit
بەراوردکردن لەگەڵ ADF4117BRUZ →
Analog Devices
Charge Pump: Precision programmable charge pump
Package: 16-pin TSSOP, 4.40 mm width
A Counter: 5-bit programmable
بەراوردکردن لەگەڵ ADF4117BRUZ →

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

ADF4117BRUZ تایبەتمەندییەکان

Product Type Single Integer-N RF PLL frequency synthesizer
Maximum RF Input Frequency 1.2 GHz
Reference Input Frequency Range 100 MHz
Maximum Output Frequency 200 MHz
Number of Synthesizer Channels 1 channel
Synthesis Architecture Integer-N
Prescaler Architecture Dual-modulus P/P+1
A Counter Width 5 bits
B Counter Width 14 bits
Reference Divider Programmable
Phase-Frequency Detector Low-noise digital PFD
Charge Pump Precision charge pump
Maximum Supply Voltage 5.5 V
System Supply Support 3 V
Input Logic CMOS
جۆری دەرچوون Clock
Extended Temperature Grade Y grade: to +125°C
پاکێج 16-pin TSSOP, 0.173-inch (4.40 mm) width
جۆری دامەزراندن Surface mount

ڕێکخستنی پینی ADF4117BRUZ

TSSOP-16 Package Pinout Diagram TSSOP-16 4.4x5mm, P0.65mm, JEDEC MO-153. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 TSSOP-16
پین 1 COM — Common reference connection
پین 2 VDD — PLL supply connection
پین 3 VIN — Prescaler or RF input supply
پین 4 A5 — A counter bit 5
پین 5 A4 — A counter bit 4
پین 6 A3 — A counter bit 3
پین 7 A2 — A counter bit 2
پین 8 A1 — A counter bit 1
پین 9 B5 — B counter bit 5
پین 10 B4 — B counter bit 4
پین 11 B3 — B counter bit 3
پین 12 B2 — B counter bit 2
پین 13 B1 — B counter bit 1
پین 14 PFD — Programmable phase-frequency-detector output
پین 15 CP — Charge-pump output
پین 16 VCO — External VCO supply connection

بەکارهێنانە باوەکان

ADF4117BRUZ گونجاوە بۆ 6 بەکارھێنانs: Wireless Receiver Local Oscillator, Wireless Transmitter Upconversion, RF Downconversion Mixer, RF Test Signal Source, Radio Equipment Frequency Control, Precision Frequency Counter Front End.

🌐

Wireless Receiver Local Oscillator

The ADF4117BRUZ fits wireless receiver local-oscillator paths that require programmable synthesis up to a 1.2 GHz RF input range. According to the Analog Devices ADF4116/4117/4118 datasheet, the programmable reference divider, 5-bit A counter, 14-bit B counter, and dual-modulus P/P+1 prescaler provide the division and comparison functions needed to develop an output tuning voltage for an external VCO. This makes the device appropriate for receiver downconversion stages where coherent frequency generation is required. The principal design check is the complete external-VCO tuning range: the ADF4117BRUZ drives the charge pump and loop filter rather than generating an RF carrier directly, so lock range, reference phase noise, VCO noise, and settling time must be evaluated together.

📡

Wireless Transmitter Upconversion

The ADF4117BRUZ can support a wireless transmitter upconversion chain by generating the local-oscillator tuning signal required by a frequency-converting mixer. Its 1.2 GHz maximum RF frequency gives it useful reach for many RF communications designs, while the integer-N architecture simplifies synthesis-ratio calculation. According to the Analog Devices manufacturer datasheet, the low-noise digital phase-frequency detector and precision charge pump compare the programmable counters against the divided reference. In practice, the external VCO must provide the final carrier and the charge-pump loop filter must be tuned for acceptable phase noise, lock range, and channel settling. Spurious-reference and supply-noise coupling should also be minimized around the reference and charge-pump paths.

🌐

RF Downconversion Mixer

The ADF4117BRUZ is well suited to driving the local-oscillator port of an RF downconversion mixer because it can synthesize frequencies within its 1.2 GHz RF input range and provide a charge-pump-based tuning control for an external VCO. The Analog Devices family datasheet identifies receiver downconversion as a primary application for the ADF411x architecture. Using this PLL in that role allows the local-oscillator frequency to be selected through the reference divider and integer counters rather than fixed analog components. Engineering attention should remain on divider settings, counter limits, loop stability, and mixer isolation. A clean reference and carefully grounded charge-pump loop help prevent modulation products and reference spurs from degrading the converted RF signal.

🖥️

RF Test Signal Source

The ADF4117BRUZ can form the programmable tuning section of an RF test-signal source when paired with an external VCO and appropriate output amplification. Its reference divider and integer-N counter structure allow the synthesized ratio to be adjusted digitally, while the 1.2 GHz RF frequency range supports many instrument and bench-test scenarios. According to the Analog Devices manufacturer datasheet, the core elements are a programmable reference divider, A and B counters, dual-modulus prescaler, phase detector, and charge pump. For laboratory use, evaluate tuning accuracy, lock-acquisition time, phase noise, and spurious performance under the intended reference. The charge-pump loop and reference routing remain the most sensitive RF-layout regions.

📻

Radio Equipment Frequency Control

The ADF4117BRUZ provides a compact frequency-control mechanism for radio equipment requiring a programmable, reference-stable local oscillator. The single-channel integer-N architecture fits equipment where channel selection must be repeatable and where a 1.2 GHz RF input range is useful. The Analog Devices manufacturer datasheet identifies the device as an integer-N PLL with programmable reference division, A and B counters, and a precision charge pump. Its TSSOP package supports conventional surface-mount assembly, but successful implementation still depends on stable reference generation, a low-noise external VCO, and correct charge-pump filtering. Designers should verify frequency tolerance, lock behavior across temperature, and supply sensitivity rather than assuming digital programmability alone guarantees RF accuracy.

🔧

Precision Frequency Counter Front End

The ADF4117BRUZ can support a precision frequency-counter or measurement front end when the instrument needs a programmable reference-derived excitation signal. Its integer-N frequency synthesis architecture allows a stable reference to establish an accurate tuning relationship, while the 1.2 GHz RF range covers many source and converter measurements. The Analog Devices manufacturer datasheet identifies the phase-frequency detector, charge pump, counters, and dual-modulus prescaler as the programmable synthesis elements. Measurement accuracy will depend on the reference oscillator, time-base calibration, VCO behavior, and loop settling. For a useful instrument design, characterize lock time, spur levels, and phase noise over the required operating range and use a controlled reference distribution network to avoid adding correlated noise or unwanted modulation.

What is the ADF4117BRUZ?
The ADF4117BRUZ is a single-channel, integer-N RF phase-locked-loop frequency synthesizer with a maximum RF input frequency of 1.2 GHz. According to the Analog Devices ADF4116/4117/4118 datasheet, it combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a dual-modulus prescaler. It is packaged in a 16-pin TSSOP for local-oscillator and frequency-synthesis applications.
What is the operating frequency of the ADF4117BRUZ?
The ADF4117BRUZ supports RF synthesis up to 1.2 GHz and is identified with a 100 MHz reference input and an output capability up to 200 MHz. According to the Analog Devices manufacturer datasheet, the exact lower frequency limits depend on the reference divider, A and B counters, prescaler, and external VCO arrangement. Use the device’s specified input range and counter equations when determining whether a requested output frequency is reachable.
Where can I download the ADF4117BRUZ datasheet PDF?
The ADF4117BRUZ datasheet PDF is available from Analog Devices through the official ADF4116/4117/4118 RF PLL frequency synthesizer data sheet. The manufacturer page also provides the ADF4117 product overview, documentation, evaluation resources, and ordering information. Use the manufacturer document for pin descriptions, counter equations, electrical characteristics, reference-divider behavior, and application guidance before releasing a PCB layout.
Where is the ADF4117BRUZ pinout?
The ADF4117BRUZ pinout is found in the pin-description table of the Analog Devices ADF4116/4117/4118 datasheet. The 16-pin TSSOP arrangement includes COM, supply, RF input, A-counter, B-counter, phase-detector, and charge-pump connections. Assign PCB nets from that table rather than inferring a pinout from the package drawing alone, because programming-counter pins and the common reference can be easy to misidentify visually.
How do I choose the ADF4117BRUZ versus another ADF411x PLL?
Choose the ADF4117BRUZ when the required RF input range reaches 1.2 GHz and integer-N operation with a 16-pin TSSOP is appropriate. The Analog Devices product family documentation identifies the ADF4116 for operation up to 550 MHz and the ADF4118 for operation up to 3.0 GHz. If the required frequency fits a lower or higher family member, changing that member can affect prescaler range, tuning range, and system performance, so compare the complete operating envelope.
Is ADF4117BRUZ suitable for a wireless receiver local oscillator?
The ADF4117BRUZ is suitable for many wireless receiver and transmitter local-oscillator designs because its family provides programmable reference division, A and B counters, and a dual-modulus prescaler up to a 1.2 GHz RF input range. According to the Analog Devices manufacturer datasheet, the architecture is intended for upconversion and downconversion sections. Verify phase-noise, lock-range, tuning-voltage, and settling requirements in the target RF system.
What are the key specifications of ADF4117BRUZ that engineers should know?
The key ADF4117BRUZ specifications are its 1.2 GHz maximum RF frequency, single-channel integer-N architecture, programmable A and B counters, programmable reference divider, and dual-modulus P/P+1 prescaler. The Analog Devices manufacturer documentation identifies a 100 MHz reference input, output capability up to 200 MHz, a 5.5 V maximum supply, and support for 3 V systems. The device also uses a precision charge pump and low-noise digital phase-frequency detector.
Where can I buy ADF4117BRUZ online?
Use the Request a Quote form on this page to request ADF4117BRUZ availability, current unit pricing, and committed lead time. Quote requests can also confirm the desired package and delivery format without relying on a static marketplace listing. The manufacturer identifies the part as a production product, and an authorized channel can confirm current lot availability before an order is placed.
What is the price of ADF4117BRUZ?
Current ADF4117BRUZ pricing depends on quantity, package suffix, inventory, and purchasing conditions. Submit a quantity and requested delivery quantity through the Request a Quote form on this page for a current quotation. This page intentionally does not publish a static price because distributor and market pricing can change independently of the component’s technical specifications.
What is the lead time for ADF4117BRUZ?
The current lead time for ADF4117BRUZ should be confirmed through the Request a Quote form on this page. Include the required quantity, target date, and acceptable delivery format so the supplier can check the relevant production lot and packaging inventory. The manufacturer product page identifies ADF4117 as a production device, but current manufacturing and distribution timing can still vary by order quantity.
Is ADF4117BRUZ in stock?
Current stock for ADF4117BRUZ can be confirmed through the Request a Quote form on this page. Provide the required order quantity and delivery schedule so the supplier can check current inventory rather than relying on a potentially stale listing status. The part is identified as a production frequency synthesizer by Analog Devices, with availability depending on lot and order volume.
What can replace ADF4117BRUZ?
The closest functional replacements are devices in the Analog Devices ADF411x family, but a true drop-in replacement must retain the same 16-pin TSSOP footprint, pin functions, programming interface, and compatible frequency, supply, prescaler, and counter characteristics. The ADF4117BRUZ-RL and ADF4117BRU differ chiefly in delivery format, so they do not provide a distinct electrical substitute. Confirm any proposed replacement against the manufacturer pin and electrical tables before PCB reuse.
Can ADF4117BRUZ-RL replace ADF4117BRUZ?
ADF4117BRUZ-RL is electrically associated with the ADF4117 and uses the same 16-pin TSSOP device, so it can support an existing design when its ordering suffix and delivery format are acceptable. The distinction is primarily commercial packaging rather than a different PLL architecture. Because the two order codes represent delivery-format variants, engineers should verify the manufacturer ordering guide for reel orientation, quantity, and handling requirements.
What is the best Analog Devices equivalent for ADF4117BRUZ?
The best Analog Devices equivalent is the ADF4117 device in another accepted ordering suffix when the underlying silicon and 16-pin TSSOP configuration are unchanged. The ADF4117BRU and ADF4117BRUZ-RL order codes appear in the product records for this family, while the ADF4117BRUZ is the tube-orderable form. For an exact functional selection, compare the manufacturer ordering table and confirm that the alternate suffix does not change electrical grade or delivery requirements.
When should I choose ADF4117BRUZ over a lower-frequency ADF411x device?
Choose the ADF4117BRUZ when the RF input frequency exceeds the 550 MHz upper range associated with the ADF4116 and reaches as high as 1.2 GHz. The Analog Devices family datasheet indicates that ADF4116, ADF4117, and ADF4118 correspond to different maximum frequency ranges while sharing the same general frequency-synthesizer architecture. Use the lower-frequency member only when its complete frequency and tuning envelope satisfies the design without compromising lock or prescaler performance.

داتای سەرچاوەی ئەندازیاری بۆ ADF4117BRUZ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the ADF4117BRUZ when a design needs a single-channel integer-N PLL with RF operation up to 1.2 GHz and a 16-pin TSSOP footprint. It is appropriate for wireless receiver and transmitter local oscillators, mixer downconversion, and programmable RF test sources that use an external VCO and charge-pump loop filter. Select an ADF4116-family member when the maximum RF requirement is no more than 550 MHz, because the ADF4116 provides a smaller prescaler range. Select an ADF4118-family member when operation above 1.2 GHz is required. Before choosing a substitute, verify pin functions, counter architecture, prescaler range, supply levels, temperature grade, reference configuration, loop behavior, and ordering suffix. ADF4117 order-code variants with different delivery suffixes should be selected according to handling requirements rather than treated as distinct electrical solutions.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە
Package 16-pin TSSOP, 4.40 mm width
Brand Analog Devices
Product Type Single integer-N RF PLL frequency synthesizer
Maximum RF Input Frequency 1.2 GHz
Reference Input Frequency 100 MHz
Maximum Output Frequency 200 MHz
Number of Channels 1
Prescaler Dual-modulus P/P+1
Maximum Supply Voltage 5.5 V
Special Feature Separate VCO supply connection for extended tuning-voltage operation

جیاکەرەوە سەرەکییەکان

  • Higher RF frequency ceiling than the ADF4116 (بەراورد بەADF4116)
  • Lower family frequency ceiling than the ADF4118 (بەراورد بەADF4118)
  • Single-channel architecture with independently programmable counters (بەراورد بەADF4116)

تێبینییەکانی دیزاین

Route the charge-pump output toward the loop filter with a short, direct trace and keep the external VCO control node physically separated from clocks, switching nodes, and high-current return paths. Place the loop-filter components at their designated charge-pump and tuning-voltage pins, and provide a nearby ground return that does not share a noisy switching current path. Because the ADF4117BRUZ generates the tuning voltage for an external VCO, parasitic pickup at the charge-pump node can appear directly as phase noise and reference spurs.

Provide a clean, low-impedance reference signal and keep the reference route short, continuous, and isolated from noisy circuits. The reference-divider and phase-frequency-detector paths determine the synthesizer’s phase-noise and spur performance, so avoid adding long stubs or routing them beneath switching regulators. Follow the manufacturer’s component values and layout examples for the loop filter, then verify acquisition time and reference-spur levels with the intended crystal or reference oscillator.

Decouple the PLL supply and the separate VCO supply connection according to the manufacturer’s application guidance, and account for their potentially different operating levels. Keep high-current return paths out of the reference and charge-pump areas. The ADF4117BRUZ documentation identifies a 5.5 V maximum power-supply rating and support for 3 V systems, so verify every rail against the absolute maximum and selected supply architecture before applying power.

Do not select a replacement solely from the frequency-synthesizer label or package count. A drop-in device must preserve the 16-pin TSSOP footprint, pin functions, counter widths, prescaler behavior, charge-pump characteristics, supply limits, and operating frequency. The ADF4116 and ADF4118 use related architectures but have different maximum RF frequencies of 550 MHz and 3.0 GHz, respectively, making them family members rather than universally interchangeable substitutes.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact order code.

داتا پشتڕاستکراوەتەوە لە: 2026-11-04 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ADF4117BRUZ datasheet ADF4117BRUZ pinout ADF4117BRUZ datasheet pdf ADF4117BRUZ equivalent ADF4117BRUZ replacement ADF4117BRUZ cross reference ADF4117BRUZ footprint ADF4117BRUZ spice model ADF4117BRUZ price ADF4117BRUZ stock Analog Devices ADF4117BRUZ ADF4117 1.2 GHz PLL ADF4117 16 pin TSSOP ADF4117 wireless receiver local oscillator ADF4117 vs ADF4116

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices ADF4117BRUZ ADF4117 ADF4116 ADF4118 integer-N phase-locked loop integer-N PLL frequency synthesizer local oscillator RF upconversion RF downconversion dual-modulus prescaler P/P+1 prescaler phase-frequency detector PFD charge pump reference divider A counter B counter TSSOP-16 TSSOP package family surface-mount package CMOS 3 V supply 5.5 V maximum supply
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ