ADL5385ACPZ - 30MHz-2.2GHz Quadrature Modulator | Analog Devices
MPN: ADL5385ACPZ ✓ چالاکADL5385ACPZ گشتی
A quadrature modulator is a key building block in modern communication transmitters, converting baseband I/Q signals into a modulated RF output. It is essential for digital modulation schemes such as QPSK, QAM, and OFDM, which are widely used in wireless standards including LTE, Wi-Fi, and point-to-point microwave links. The ADL5385's excellent phase accuracy and amplitude balance ensure minimal error vector magnitude (EVM), which is critical for high data-rate links.
Key features of the ADL5385ACPZ include a wide operating frequency range of 30 MHz to 2200 MHz, high output linearity, and low noise. The device operates from a single 5 V supply and features a differential baseband interface with a common-mode voltage of approximately 2.5 V. It provides a differential RF output that can be used with an external balun to convert to single-ended. The modulator also includes an enable function for power-down control, reducing quiescent current when not in use.
Technically, the ADL5385 uses a double-balanced mixer architecture with integrated quadrature phase splitting. The LO input is internally divided into I and Q phases, and each is mixed with the corresponding baseband signal. The outputs are summed to produce the modulated RF signal. The device achieves high sideband suppression and carrier feedthrough performance, which are essential for spectral purity. The baseband inputs accept a wide common-mode range, simplifying interface to DACs and baseband processors.
Typical applications include cellular base stations, microwave point-to-point radios, satellite communications, and test equipment. The ADL5385 is also suitable for software-defined radio (SDR) transmitters where flexibility and performance are paramount. Its wide frequency range covers multiple bands, reducing the need for multiple modulators.
When designing with the ADL5385ACPZ, ensure proper grounding and decoupling of the supply pins. The exposed pad should be soldered to a low-impedance ground plane for optimal thermal and RF performance. The baseband inputs should be driven with differential signals to maintain balance and minimize even-order distortion.
جێگرەوەکانی جێگۆڕکێ بۆ ADL5385ACPZ — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADL5385ACPZ (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package.
ADL5385ACPZ-R7
✅ جێگرەوەی ڕاستەوخۆپەیوەندی بۆ نرخ
بینینی داتاشیت →ADL5385ACPZ-R2
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADL5385ACPZ-WP
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADL5385ACPZ-RL7
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADL5385ACPZ-RL
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADL5385ACPZ تایبەتمەندییەکان
| کارکردن | Quadrature Modulator |
| Frequency Range | 30 MHz to 2200 MHz |
| ڤۆڵتیەی دابینکردن | 5 V |
| Baseband Interface | Differential |
| Baseband Common-Mode Voltage | 2.5 V (typical) |
| RF Output | Differential |
| پاکێج | 24-Lead LFCSP (4x4 mm) |
| جۆری دامەزراندن | Surface Mount |
| مەودای پلەی گەرمیی کارکردن | -40°C to +85°C |
| Enable Function | Yes |
| دۆخی RoHS | Compliant |
ڕێکخستنی پینی ADL5385ACPZ
| پین 1 | GND — Ground |
| پین 2 | IBBP — Positive I baseband input |
| پین 3 | IBBN — Negative I baseband input |
| پین 4 | QBBP — Positive Q baseband input |
| پین 5 | QBBN — Negative Q baseband input |
| پین 6 | GND — Ground |
| پین 7 | EN — Enable (active high) |
| پین 8 | VPOS — Positive supply (5V) |
| پین 9 | LOIP — Positive LO input |
| پین 10 | LOIN — Negative LO input |
| پین 11 | GND — Ground |
| پین 12 | RFOUTP — Positive RF output |
| پین 13 | RFOUTN — Negative RF output |
| پین 14 | GND — Ground |
| پین 15 | GND — Ground |
| پین 16 | GND — Ground |
| پین 17 | GND — Ground |
| پین 18 | GND — Ground |
| پین 19 | GND — Ground |
| پین 20 | GND — Ground |
| پین 21 | GND — Ground |
| پین 22 | GND — Ground |
| پین 23 | GND — Ground |
| پین 24 | GND — Ground |
بەکارهێنانە باوەکان
ADL5385ACPZ گونجاوە بۆ 6 بەکارھێنانs: Cellular Base Stations, Microwave Point-to-Point Radios, Satellite Communications, Test and Measurement Equipment, Software-Defined Radio (SDR), Wireless Infrastructure.
Cellular Base Stations
The ADL5385ACPZ is ideal for cellular base station transmitters, operating from 30 MHz to 2200 MHz to cover GSM, WCDMA, and LTE bands. Its excellent phase accuracy and amplitude balance ensure low EVM, critical for high-order QAM modulation. The differential baseband interface simplifies connection to DACs, and the 5 V supply is common in base station designs. The device's high linearity helps meet spectral emission masks, while the enable function allows power saving during idle periods.
پێشنیارکراو
Microwave Point-to-Point Radios
For microwave point-to-point links, the ADL5385ACPZ provides direct RF modulation up to 2.2 GHz, covering licensed bands. Its low noise and high linearity support high-capacity links with 256-QAM or higher. The differential RF output can drive a balun to feed the antenna, and the wide frequency range allows a single design to cover multiple bands. The compact LFCSP package is suitable for outdoor units where space is limited.
پێشنیارکراو
Satellite Communications
The ADL5385ACPZ supports satellite communication uplinks in L-band and S-band, with frequencies up to 2.2 GHz. Its high performance ensures reliable links with low error rates. The device's enable function allows power management in battery-powered satellite terminals. The differential baseband interface is compatible with common satellite modem chipsets, and the 5 V supply simplifies power design.
پێشنیارکراو
Test and Measurement Equipment
In test equipment such as signal generators and vector modulators, the ADL5385ACPZ provides accurate I/Q modulation over a wide frequency range. Its excellent phase accuracy and amplitude balance enable precise generation of complex modulation formats. The device's differential interface allows easy integration with arbitrary waveform generators, and the enable function supports automated test sequences. The compact package is ideal for benchtop instruments.
پێشنیارکراو
Software-Defined Radio (SDR)
The ADL5385ACPZ is well-suited for SDR transmitters, covering 30 MHz to 2200 MHz to support multiple bands with a single hardware platform. Its wide frequency range and high performance enable flexible modulation schemes. The differential baseband interface connects directly to SDR DACs, and the enable function allows dynamic power management. The device's small footprint is ideal for compact SDR modules.
پێشنیارکراو
Wireless Infrastructure
The ADL5385ACPZ is used in wireless infrastructure such as repeaters and distributed antenna systems. Its wide frequency range covers multiple cellular bands, and its high linearity ensures minimal distortion. The device's enable function supports remote power control, and the differential interface simplifies connection to baseband processors. The 5 V supply is standard in infrastructure equipment.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADL5385ACPZ — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADL5385ACPZ-R7 | ADL5385ACPZ-R2 | ADL5385ACPZ-WP |
|---|---|---|---|---|
| Package | 24-Lead LFCSP | 24-Lead LFCSP | 24-Lead LFCSP | 24-Lead LFCSP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Frequency Range | 30 MHz to 2200 MHz | 30 MHz to 2200 MHz | 30 MHz to 2200 MHz | 30 MHz to 2200 MHz |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
| Baseband Interface | Differential | Differential | Differential | Differential |
| RF Output | Differential | Differential | Differential | Differential |
| Enable Function | Yes | Yes | Yes | Yes |
| Operating Temperature | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C | -40°C to +85°C |
جیاکەرەوە سەرەکییەکان
- Wide frequency range from 30 MHz to 2200 MHz (بەراورد بەADL5385ACPZ-R7)
- Excellent phase accuracy and amplitude balance (بەراورد بەADL5385ACPZ-R7)
- Single 5 V supply operation (بەراورد بەADL5385ACPZ-R7)
تێبینییەکانی دیزاین
Ensure the exposed pad is soldered to a low-impedance ground plane for optimal thermal and RF performance. Use multiple vias under the pad to enhance heat dissipation and reduce ground inductance.
Decouple the VPOS pin with a 100 nF capacitor placed as close as possible to the pin, and a 10 uF bulk capacitor nearby. This ensures stable operation and minimizes supply noise that could affect modulation quality.
Keep the differential baseband traces matched in length and impedance to maintain I/Q balance. Use 50-ohm differential microstrip or stripline for RF output traces to minimize reflections and signal loss.
زانیاری پابەندبوون
RoHS compliant per Analog Devices product page. Other compliance data not specified in provided sources.