ADM211EARU - 4/5 RS-232 Transceiver | Analog Devices
MPN: ADM211EARU ✓ چالاکADM211EARU گشتی
An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received line-level signals back into CMOS-compatible logic. It belongs to the interface IC hierarchy, alongside UART and communications transceivers, and provides the physical signaling layer between digital equipment and a serial port. ADM211EARU supports the RS-232 and V.28 interface requirements associated with single-ended, point-to-point serial connections.
The four-driver and five-receiver arrangement is the principal feature of the ADM211 family. Its maximum signaling rate of 200 kbps supports conventional RS-232 equipment, industrial control links, instrumentation, and data-acquisition systems. Operation from one 5 V rail simplifies system power design, while the 0.1 µF charge-pump capacitor avoids the external supply requirements associated with older bipolar RS-232 implementations.
The Analog Devices product documentation describes the ADM211 as a production device with EMI/EMC-compliant interface circuitry and ±15 kV ESD protection. These characteristics are especially valuable when the connector is exposed to user-accessible cables, industrial cabinets, or electrically noisy equipment. The 28-lead TSSOP package provides a compact surface-mount footprint while exposing individual driver outputs, receiver inputs, ground, supply, and charge-pump functions for direct PCB routing.
Typical uses include industrial serial controllers, test and measurement equipment, POS terminals, communications adapters, and embedded systems that retain legacy RS-232 ports. Because the device provides more drivers than receivers, it is particularly useful for multiport designs with several outbound modem-style signals and fewer inbound signals. It can also serve systems requiring unidirectional RS-232 outputs alongside independent receive channels.
PCB layout should keep the RS-232 traces short and route them away from clocks, switching regulators, and high-current return paths. Connect the specified 0.1 µF charge-pump capacitor close to its dedicated capacitor pin, provide a low-impedance ground connection, and place protection components near the external connector. ESD protection helps the interface, but cable transients should still be evaluated at the system boundary.
This product page combines the ADM211 family characteristics, package information, sourcing paths, interface guidance, and replacement evaluation criteria. It also distinguishes the exact ADM211EARU ordering code from reel and tape-and-reel suffix variants so engineers can maintain the correct 28-lead TSSOP footprint and BOM intent.
جێگرەوەکانی جێگۆڕکێ بۆ ADM211EARU — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.
داوای جێگرەوەکان بکەADM211EARU تایبەتمەندییەکان
| Product Type | RS-232 transceiver |
| Driver Count | 4 |
| Receiver Count | 5 |
| Interface Standard | RS-232 |
| جۆری ڕووکار | V.28 |
| ڤۆڵتیەی دابینکردن | 5 V |
| Maximum Data Rate | 200 kbps |
| Charge-Pump Capacitor | 0.1 µF |
| ESD Protection | ±15 kV |
| پاکێج | 28-lead TSSOP |
| جۆری دامەزراندن | Surface mount |
| Production Status | Production |
| EMI/EMC Compliance | Compliant |
| Number of Drivers and Receivers | 4 drivers, 5 receivers |
| Power Supply Count | 1 |
ڕێنمایی ڕێکخستنی پینی ADM211EARU 28-lead tssop
ڕێکخستنی پین بۆ ADM211EARU (پاکێجی 28-lead tssop). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADM211EARU.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADM211EARU گونجاوە بۆ 6 بەکارھێنانs: Industrial Serial Controllers, Point-of-Sale Terminal Interfaces, Test and Measurement Equipment, Communications Adapters, Data Acquisition Systems, Embedded Legacy Port Expansion.
Industrial Serial Controllers
The ADM211EARU fits industrial controllers that retain multiple legacy RS-232 ports for configuration, diagnostics, or external equipment. Four drivers can command separate peripheral channels, while five receivers can collect status or alarm information from independent devices. Its 5 V supply simplifies integration with controller logic, and the 200 kbps rate is suitable for common supervisory protocols. Place the 0.1 µF charge-pump capacitor close to the device and route the RS-232 traces away from switching nodes to preserve signal integrity inside an industrial enclosure.
پێشنیارکراو
Point-of-Sale Terminal Interfaces
The ADM211EARU can support point-of-sale peripherals that use RS-232 for receipt printers, scanners, or customer displays. A system needing several outbound command or control signals benefits from the four integrated drivers, while five receiver inputs provide additional status channels. The single 5 V operation aligns with embedded terminal power rails, and 200 kbps accommodates conventional serial peripherals. Engineers should include connector-side transient protection and maintain a clean ground return between the terminal and attached equipment.
پێشنیارکراو
Test and Measurement Equipment
The ADM211EARU is appropriate for legacy test equipment that communicates with older instruments, fixtures, or service ports. Four driver outputs can initiate commands across multiple interfaces, and five receivers allow concurrent monitoring of instrument status lines. The 200 kbps maximum rate supports common automated test protocols without demanding modern high-speed differential signaling. Keep interface traces short, provide a solid ground plane, and place any added suppressor network at the connector rather than near sensitive circuitry.
پێشنیارکراو
Communications Adapters
The ADM211EARU can be used in legacy-to-modern communications adapters that expose RS-232 ports from a controller or embedded processor. Its four transmitters and five receivers are useful for bridge products carrying multiple handshake and data lines. Running from one 5 V rail simplifies adapter power architecture, while the 28-lead TSSOP preserves a compact surface-mount footprint. Validate line-direction logic in the firmware and verify that unused receiver inputs remain in a defined state to prevent noise-driven chatter.
پێشنیارکراو
Data Acquisition Systems
The ADM211EARU can serve as the command and status interface in a laboratory data-acquisition system built around legacy serial instruments. Multiple receiver channels allow operators to monitor ready, alarm, or interlock signals, while four drivers support configuration commands and resets. The 200 kbps signaling rate is appropriate for short control links carrying commands rather than continuous high-volume measurement streams. For acquisition accuracy, isolate the RS-232 wiring from analog inputs and avoid sharing return currents with sensitive sensor returns.
پێشنیارکراو
Embedded Legacy Port Expansion
The ADM211EARU allows an embedded controller with limited legacy I/O to add a concentrated RS-232 interface. Four drivers support outgoing modem-control and command signals, and five receivers accept incoming data or status indications. Because the device uses a single 5 V rail and a 0.1 µF charge-pump capacitor, it can fit compact embedded assemblies without a separate negative supply. Firmware should define the state of every driver during reset and provide adequate electrical protection for user-accessible cable connections.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADM211EARU — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە |
|---|---|
| Product Type | RS-232 and V.28 transceiver |
| Driver Count | 4 |
| Receiver Count | 5 |
| Maximum Data Rate | 200 kbps |
| Supply Voltage | 5 V |
| Charge-Pump Capacitor | 0.1 µF |
| ESD Protection | ±15 kV |
| Package | 28-lead TSSOP |
| Brand | Analog Devices |
| Production Status | Production |
جیاکەرەوە سەرەکییەکان
- Higher transmit-channel count than a one-driver, one-receiver transceiver (بەراورد بەMAX3221IPWR)
- Single 5 V rail operation with integrated charge-pump support (بەراورد بەMC1489AD)
- Compact 28-lead multi-channel interface (بەراورد بەADM213EARSZ)
تێبینییەکانی دیزاین
Route the ADM211EARU charge-pump capacitor connection as a short, direct loop between the capacitor pins and the specified ground reference. Avoid placing test pads, long vias, or parallel signal traces beneath the charge-pump area. Because the device uses one 0.1 µF capacitor to generate the RS-232 line voltage, unnecessary trace inductance and resistance can reduce driver margin, particularly when several outputs switch simultaneously.
Do not substitute a generic 4/5 RS-232 transceiver solely by channel count. Verify the 28-lead TSSOP footprint, supply pins, charge-pump connection, receiver enable functions, ground arrangement, and logic levels against the ADM211 datasheet. A suffix change such as a reel code may represent the same electrical device, but a different package suffix can change the PCB footprint and therefore is not a drop-in replacement.
Keep RS-232 traces away from switching-regulator traces, high-speed clocks, relay contacts, and inductive loads. Provide a continuous ground reference under the interface and return cable-shield currents through a controlled chassis or signal-ground path. For cables leaving the enclosure, add appropriately rated transient protection at the connector because the device's ±15 kV ESD rating does not replace a complete external surge strategy.
Define the startup state of all four drivers and verify that the five receiver inputs have valid levels when unused. A floating receiver input can amplify noise and create false transitions in the host interface. Use the manufacturer datasheet to identify any enable, shutdown, or unused-pin requirements, and connect unused inputs to a defined logic level rather than leaving them mechanically floating.
زانیاری پابەندبوون
Analog Devices identifies the ADM2xxE family as EMI/EMC compliant and documents ±15 kV ESD protection. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements are not confirmed for the exact ordering code.