Analog Devices

ADM238LJR - 4/4 5V RS-232 Transceiver | Analog Devices

MPN: ADM238LJR ✓ چالاک
5 V Vdss EIA-232-E and V.28 Rds(on) 24-pin SOIC Package
MOQ: 1 |

ADM238LJR گشتی

The Analog Devices ADM238LJR is a four-driver, four-receiver RS-232 transceiver powered by a single 5 V supply and packaged in a 24-pin SOIC. It supports data rates up to 120 kB/s, provides approximately 9 V driver output swing from the 5 V supply, and operates with 1 uF capacitors according to the manufacturer feature summary. The device is designed for EIA-232-E and V.28 interfaces where traditional positive and negative ±12 V supplies are unavailable.

An RS-232 transceiver is an interface IC that combines differential signaling drivers and receivers for point-to-point serial communication. The ADM238LJR belongs to the RS-232 interface transceiver category, where the transmitter converts logic-level signals into RS-232-compatible levels and the receiver converts those levels back into CMOS-compatible signals. Its four independent channels support bidirectional data paths in equipment requiring more than one serial connection.

The integrated DC-DC converter allows the IC to generate the positive and negative voltages needed by RS-232 drivers from one 5 V supply. This reduces external power-supply complexity while preserving the required bipolar signaling levels. The manufacturer lists approximately 9 V output swing, low-power shutdown, receivers that remain active during shutdown, and 1 uF external capacitors as key operating characteristics.

The ADM2xx family supports EIA-232-E and V.28 communications interfaces, and the driver architecture is designed for data transmission beyond the formal EIA-232-E rate. The ADM238LJR combines four transmit channels and four receive channels in one device, making it suitable for console links, instrumentation, industrial control equipment, and legacy peripheral connectivity. A single IC can serve multiple RS-232 ports while centralizing supply and decoupling requirements.

Common application areas include industrial controllers, test and measurement equipment, point-of-sale terminals, security systems, and embedded systems that retain an RS-232 interface. The 24-pin SOIC package is suitable for conventional surface-mount PCB assembly. Designers should maintain the required charge-pump capacitor connections and place bypass and charge-pump capacitors close to their associated pins according to the manufacturer datasheet layout guidance.

The principal design trade-off is that its four-driver, four-receiver arrangement is more specialized than single-channel transceivers. It provides higher channel density and simpler 5 V-only power design, but applications needing only one RS-232 link may not use every channel. Input protection, cable length, grounding, and data-rate limits must be evaluated against the EIA-232-E and V.28 interface requirements.

This page organizes the ADM238LJR specifications, pin-compatible family alternatives, application guidance, and comparison criteria to support component selection and PCB planning. It also identifies the documentation and electrical details that require confirmation in the Analog Devices data sheet before production release.

جێگرەوەکانی جێگۆڕکێ بۆ ADM238LJR — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADM238LJR (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Product Type, Charge-Pump Capacitor Value, Number of Receivers, RS-232 Output Swing.

Analog Devices
Package: 16-lead SOIC
Product Type: RS-232 line driver and receiver IC
Charge-Pump Capacitor Value: 1 F
بەراوردکردن لەگەڵ ADM238LJR →
Analog Devices
Package: 20-pin SOIC
Product Type: +5 V powered CMOS RS-232 drivers/receivers
RS-232 Output Swing: 9 V
بەراوردکردن لەگەڵ ADM238LJR →
Analog Devices
Package: 28-pin SOIC
Product Type: RS-232 line transceiver
Charge-Pump Capacitor Value: 1 µF
بەراوردکردن لەگەڵ ADM238LJR →

ADM239LJRZ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 24-pin SOIC
Same-brand ADM2xx 24-pin four-channel-family architecture; power-management behavior differs and must be checked in the ADM239L data sheet

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ADM241LJRZ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
Analog Devices
📦 24-pin SOIC
RS-232 line transceiver · 4 · 5 · 5 V · 4.5 V to 5.5 V · 120 kB/s · ±9 V · 1 µF

پەیوەندی بۆ نرخ

بینینی داتاشیت →

ADM236LJRZ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 24-pin SOIC
Same-brand ADM2xx 24-pin four-driver and four-receiver family; electrical timing and power details require comparison

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ADM233LJRZ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 24-pin SOIC
Same-brand ADM2xx 24-pin multi-channel family member; data-rate and power-management details differ

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ADM237LJRZ

✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوە
📦 24-pin SOIC
Same-brand ADM2xx 24-pin multi-channel family member; output swing, shutdown, and timing limits require confirmation

📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)

ADM238LJR تایبەتمەندییەکان

Product Type RS-232 line driver and receiver transceiver
Number of Drivers 4
Number of Receivers 4
ڤۆڵتیەی دابینکردن 5 V
Maximum Data Rate 120 kB/s
Interface Standards EIA-232-E and V.28
Driver Output Swing 9 V
Charge-Pump Capacitor Value 1 uF
Shutdown Function Low-power shutdown with receivers active
Receiver Maximum Input Voltage 30 V
پاکێج 24-pin SOIC
Package Width 7.5 mm
جۆری دامەزراندن Surface mount

ڕێنمایی ڕێکخستنی پینی ADM238LJR 7.5 mm

ڕێکخستنی پین بۆ ADM238LJR (پاکێجی 7.5 mm). ژمارەدانی پین، فەنکشنەکان و نەخشەکانی پەیوەندی لە داتاشیتی بەرھەمھێنەردا پێناسە کراون. سەرنجی بدە بۆ شوێنپێی ورد و ڕێنمایییەکانی لەحیمکردن.

نەخشەی پینئاوتی پاکێجی 7.5 mm بۆ ADM238LJR

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADM238LJR.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ADM238LJR گونجاوە بۆ 6 بەکارھێنانs: Industrial Serial Controllers, Test and Measurement Equipment, Point-of-Sale Terminals, Security and Access Systems, Embedded Serial Port Expansion, Instrument Data Acquisition.

🏭

Industrial Serial Controllers

The ADM238LJR fits industrial controllers that retain several RS-232 links for configuration tools, local operators, sensors, and service equipment. Four drivers and four receivers provide channel density without requiring four separate transceiver packages, while the single 5 V supply simplifies system power. Its 120 kB/s feature rate supports moderate-speed legacy communication, and the 30 V receiver input rating is useful when exposed ports require tolerance beyond normal logic levels. The integrated DC-DC converters eliminate external ±12 V rails, although charge-pump capacitors and careful ground routing remain essential.

🖥️

Test and Measurement Equipment

The ADM238LJR is useful in test equipment that communicates with legacy instruments over RS-232. Four transmit channels can address multiple devices, while four receive channels support commands, measurements, and status reporting from equipment sharing a common ground. A 5 V-only supply arrangement reduces the need for a bipolar rail in compact instruments, and the 120 kB/s maximum feature rate is appropriate for many low-to-moderate-speed serial protocols. Designers should apply the manufacturer grounding and charge-pump layout guidance to minimize noise and cable-related errors.

📺

Point-of-Sale Terminals

The ADM238LJR can support the mixture of RS-232 peripherals commonly encountered around point-of-sale systems, including receipt printers, scanners, scales, and customer displays. Its four-driver, four-receiver arrangement provides enough parallel connectivity to reduce component count, and the single 5 V supply suits compact equipment powered from regulated system rails. The device's approximately 9 V driver output swing provides useful margin for RS-232 signaling, while shutdown control helps manage power in compact terminals. Use appropriate transient protection where cables leave the enclosure.

🛡️

Security and Access Systems

The ADM238LJR is suitable for access-control and security panels that communicate with readers, controllers, or service tools using RS-232. Four receive channels can consolidate input and status signals, while four drivers can address multiple field devices when the protocol and grounding permit shared wiring arrangements. Its 30 V receiver input rating adds tolerance for externally connected signals, and the integrated DC-DC converters simplify deployment in 5 V security equipment. For installations with long cables or severe electrical noise, add surge and ESD protection at the connector.

🔧

Embedded Serial Port Expansion

The ADM238LJR allows an embedded controller to add legacy RS-232 connectivity without implementing discrete level-shifting circuits. Its four transmit and four receive functions are useful when the host must connect to several peripherals that expose only older serial interfaces. Running from one 5 V rail avoids the additional negative supply traditionally associated with bipolar RS-232 drivers. The 120 kB/s feature rate accommodates many control and diagnostic protocols, but the selected interface must also observe RS-232 range, capacitance, and timing limitations.

📡

Instrument Data Acquisition

The ADM238LJR can connect laboratory and process instruments that expose RS-232 command, measurement, or control ports. Multiple receiver channels help separate responses from several instruments, and multiple drivers support configuration commands when each device has a dedicated serial connection. Operation from one 5 V supply is valuable in portable and benchtop equipment, while the approximately 9 V driver swing supports compliant RS-232 levels. Keep signal returns within the interface's common-mode limits and use the manufacturer data sheet to confirm whether an application requires additional galvanic isolation.

What is the ADM238LJR?
The ADM238LJR is a four-driver, four-receiver RS-232 transceiver from Analog Devices. It operates from a single 5 V supply, supports EIA-232-E and V.28 interfaces, and uses integrated DC-DC conversion to provide bipolar driver signals without external ±12 V rails. The manufacturer feature summary identifies a maximum data rate of 120 kB/s, approximately 9 V output swing, and 1 uF charge-pump capacitors. The device is packaged in a 24-pin SOIC for standard surface-mount assembly.
How many RS-232 channels does the ADM238LJR provide?
The ADM238LJR provides four RS-232 driver channels and four receiver channels. This channel arrangement allows one IC to support several point-to-point serial links or bidirectional interfaces without using separate single-channel transceiver packages. The Analog Devices family documentation describes the ADM2xx devices as line drivers and receivers for EIA-232-E and V.28 communications. Actual channel use can be fewer if the application does not require all eight driver and receiver functions.
What is the operating voltage of ADM238LJR?
The ADM238LJR operates from a single 5 V supply. According to the Analog Devices data sheet for the ADM231L, ADM232L, ADM233L, ADM234L, ADM236L, ADM237L, ADM238L, ADM239L, and ADM241L families, the devices are designed for RS-232 interfaces where ±12 V is unavailable. The on-board DC-DC converters generate the positive and negative voltages required by the RS-232 drivers, while the external supply powers the CMOS logic and receiver functions.
What is the maximum data rate of ADM238LJR?
The ADM238LJR supports data rates up to 120 kB/s according to the Analog Devices feature summary. The manufacturer product page describes the ADM238L family as a low-power, 5 V CMOS RS-232 transceiver for 100 kbps operation, while the detailed family data sheet notes that the high-slew-rate drivers maintain ±5 V signal levels at rates well above the EIA-232-E specification. For system design, use the specific ADM238L timing limits in the manufacturer data sheet.
Does the ADM238LJR need external positive and negative power supplies?
No. The ADM238LJR requires a single 5 V supply because it includes on-board DC-DC converters that generate the bipolar voltage levels required by its RS-232 drivers. The Analog Devices data sheet identifies this feature as especially useful where ±12 V is not available. The converter still requires correctly selected external charge-pump capacitors, listed as 1 uF in the device feature summary, and those components must follow the datasheet connection and layout instructions.
Where can I download the ADM238LJR datasheet PDF?
The official Analog Devices ADM238L datasheet PDF is available from the manufacturer document link listed on this page. It covers the ADM231L, ADM232L, ADM233L, ADM234L, ADM236L, ADM237L, ADM238L, ADM239L, and ADM241L families, including the ADM238L used in the ADM238LJR ordering code. Use the manufacturer PDF for final pin assignments, electrical limits, recommended capacitor values, layout guidance, and ordering information.
Where can I find the ADM238LJR pinout?
The ADM238LJR pinout is found in the pin-description table and package drawing in the Analog Devices ADM238L family data sheet. The device uses a 24-pin SOIC, and the exact numerical assignments should be taken from the manufacturer PDF before PCB routing. The product-page documentation and linked family data sheet are the appropriate references for confirming driver, receiver, supply, ground, shutdown, and charge-pump capacitor connections.
What can replace the ADM238LJR?
The ADM238LJRZ and ADM238LJR-REEL are closely related order codes for the ADM238L device, but suffix or reel-code changes alone are not meaningful functional replacements. Same-family ADM239L, ADM241L, ADM236L, ADM233L, and ADM237L devices may share the 24-pin architecture, while ADM208EARZ is described as pin-compatible but uses a different 20-pin package. Confirm the exact footprint, channel count, shutdown behavior, and electrical timing before approving any substitute.
What is the best cross-brand equivalent for ADM238LJR?
No cross-brand equivalent is established here because the cross-reference results do not identify a pin-to-pin, same-package substitute with verified electrical characteristics. The ADM208EARZ is described as pin-compatible with ESD-hardened RS-232 pins, but it is offered in a 20-pin package rather than the ADM238LJR's 24-pin SOIC, so it is not a same-footprint drop-in replacement. Use the Analog Devices family alternatives when a 24-pin pinout and four-channel architecture can be verified directly.
ADM238LJR versus ADM239LJR, which is better for a new design?
The ADM238LJR is the baseline four-driver, four-receiver 5 V RS-232 choice, while ADM239L-family devices belong to the same Analog Devices interface family and may differ in operating or power-management details. The ADM238LJR has a documented 120 kB/s feature rate, approximately 9 V driver swing, and 1 uF charge-pump capacitors. Choose it when those characteristics and the 24-pin pinout match the design; compare the ADM239L data sheet before using a family variant for additional shutdown or power-management requirements.
When should I choose ADM238LJR over a single-channel RS-232 transceiver?
Choose the ADM238LJR when the design needs as many as four transmit and four receive functions and benefits from one integrated 5 V supply arrangement. A single-channel transceiver can be more economical when only one RS-232 link is required, but it requires another package and separate support components for every additional port. The ADM238LJR's four-driver, four-receiver configuration reduces package count while preserving EIA-232-E and V.28 compatibility.
Is ADM238LJR suitable for industrial control equipment?
The ADM238LJR is suitable for many industrial-control RS-232 interfaces when the electrical, temperature, and isolation requirements are satisfied. Its single 5 V supply, EIA-232-E and V.28 support, four transmit channels, and four receive channels simplify legacy serial connectivity in controllers and test equipment. The operating temperature range and any industrial qualification status must be confirmed in the manufacturer documentation before deployment in a temperature- or reliability-critical environment.
Where can I buy ADM238LJR and what is the price?
Use the Request a Quote form on this page to request current ADM238LJR commercial terms, availability, minimum order quantity, and lead time. The manufacturer lists the ADM238L as a production device, while transactional stock and pricing change by date and quantity. XAIPART's quote process returns the current channel and packaging options without embedding a static price that could become outdated.
What is the lead time and stock status for ADM238LJR?
Submit the Request a Quote form on this page for the current stock position, minimum order quantity, lead time, and delivery schedule. The Analog Devices product page identifies ADM238L as a production device, but that lifecycle statement does not constitute a live inventory guarantee. Confirmed allocation and delivery information should be obtained for the exact ADM238LJR ordering code and selected package format.
What are the key specifications of ADM238LJR that engineers should know?
The ADM238LJR combines four RS-232 drivers and four receivers in a 24-pin SOIC powered by one 5 V supply. Its headline characteristics include a 120 kB/s maximum feature rate, approximately 9 V output swing, 1 uF charge-pump capacitors, low-power shutdown with active receivers, and a 30 V maximum receiver input voltage. It targets EIA-232-E and V.28 interfaces and includes on-board DC-DC conversion, avoiding separate ±12 V supply rails.
What are the main ADM238LJR design considerations?
The principal considerations are charge-pump capacitor placement, signal integrity, grounding, and shutdown-state behavior. The Analog Devices feature summary specifies 1 uF capacitors, and the 30 V receiver input rating must be considered when exposed cables or fault conditions are possible. Place the charge-pump and bypass capacitors close to their pins, route each driver and receiver return path deliberately, and verify the unused-channel configuration against the manufacturer pin-description table.

داتای سەرچاوەی ئەندازیاری بۆ ADM238LJR — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose the ADM238LJR when the design needs four RS-232 transmit channels and four receive channels from one 5 V supply. Its integrated DC-DC converters, approximately 9 V driver swing, 120 kB/s feature rate, and receiver-active shutdown behavior make it a strong option for multi-port industrial, instrumentation, and embedded systems. Select ADM239LJRZ or ADM241LJRZ when their specific power-management characteristics better match the system after checking their data sheets. ADM236LJRZ and ADM233LJRZ are useful family alternatives for compatible 24-pin designs, while ADM237LJRZ may suit applications requiring different family-level behavior. The ADM208EARZ is not a footprint-compatible replacement because it uses a 20-pin package. For any family alternative, verify pin assignments, channel enable logic, shutdown behavior, timing, capacitor values, and absolute maximum ratings before releasing a PCB revision.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە ADM239LJRZ ADM241LJRZ ADM236LJRZ ADM233LJRZ ADM237LJRZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 24-pin SOIC 24-pin SOIC 24-pin SOIC 24-pin SOIC 24-pin SOIC 24-pin SOIC
Product Type RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver
Number of Drivers 4 4 4 4 4 4
Number of Receivers 4 4 4 4 4 4
Interface Standards EIA-232-E and V.28 EIA-232-E and V.28 EIA-232-E and V.28 EIA-232-E and V.28 EIA-232-E and V.28 EIA-232-E and V.28

جیاکەرەوە سەرەکییەکان

  • Four-driver and four-receiver integration reduces package count (بەراورد بەMAX232NSR)
  • Single 5 V supply with integrated DC-DC conversion (بەراورد بەADM208EARZ)
  • Receiver operation during shutdown supports monitored interfaces (بەراورد بەADM239LJRZ)

تێبینییەکانی دیزاین

Use the Analog Devices pin-description table and recommended PCB layout to place the 1 uF charge-pump capacitors directly at their associated pins. Keep the high-current charge-pump loops compact, minimize loop area, and provide a low-impedance bypass path from the 5 V supply to ground. Because the device creates bipolar driver signals internally, long capacitor routes and shared ground bottlenecks can increase driver distortion or reduce margin on slow RS-232 links.

Separate transmit and receive return paths where practical and connect the interface ground reference close to the connector and transceiver ground pins. Avoid routing RS-232 signals beneath switching-converter or high-current power stages. The 30 V receiver input rating is not a substitute for external surge protection, so add the protection required by the installation when a cable can experience electrostatic discharge or induced surges at the connector.

Do not treat the ADM238LJR's approximately 9 V output swing as equivalent to a full ±15 V RS-232 output. Confirm that the connected receiver satisfies EIA-232-E and V.28 thresholds with the cable loading and baud rate in use. Also verify whether the receivers should remain active during shutdown, because the target device explicitly supports active receivers in shutdown and a family alternative may use a different power-management arrangement.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The ADM238L is an industrial interface IC and is not presented as an AEC-Q100-qualified automotive device. Compliance details require confirmation from the current Analog Devices product documentation or declaration.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ADM238LJR datasheet ADM238LJR pinout ADM238LJR datasheet pdf ADM238LJR schematic ADM238LJR equivalent ADM238LJR replacement ADM238LJR cross reference ADM238LJR footprint ADM238LJR spice model ADM238LJR price ADM238LJR stock Analog Devices ADM238LJR ADM238L 24 SOIC pinout ADM238L 4/4 RS-232 application

پێکهاتە و زاراوە پەیوەندیدارەکان

Analog Devices ADM238LJR ADM238L ADM239L ADM241L ADM236L ADM233L ADM237L ADM208EARZ RS-232 transceiver RS-232 interface IC line driver line receiver serial interface EIA-232-E V.28 CMOS DC-DC converter charge-pump capacitor 24-pin SOIC SOIC family surface-mount package RS-232 driver RS-232 receiver 5 V power supply
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ