Texas Instruments

ADS1213P - 22-Bit, 6.25-kSPS Delta-Sigma ADC | Texas Instruments

MPN: ADS1213P ✓ چالاک
5 V Vdss 24-pin plastic DIP Package
MOQ: 1 |

ADS1213P گشتی

Texas Instruments ADS1213P is a 22-bit delta-sigma analog-to-digital converter with four differential input channels, a 6.25-kSPS maximum data rate, programmable gain, an internal voltage reference, and a 24-pin plastic DIP package. It combines high resolution with low power consumption and is designed for precision measurement of low-level differential signals.

A delta-sigma ADC is a voltage-regulating ADC category that uses oversampling, noise shaping, and digital filtering to convert analog inputs into high-resolution digital codes. Within the broader semiconductor hierarchy, the ADS1213P belongs to the analog-to-digital converter, data-converter IC, and precision-measurement families. Its differential inputs, programmable gain amplifier, and low-noise architecture are especially useful when measuring signals from sensors, strain gauges, bridges, and industrial transducers.

The converter provides 22-bit resolution, 20-bit effective resolution at 10 Hz, and 16-bit effective resolution at 1 kHz. A programmable data rate extends up to 6.25 kSPS, allowing designers to trade conversion speed against noise performance. Differential inputs reject common-mode noise, while programmable gain accommodates low-level transducer outputs without requiring a separate instrumentation amplifier.

The ADS1213 architecture includes a four-channel input multiplexer, delta-sigma modulator, programmable gain amplifier, internal reference, and digital interface. The SPI-compatible synchronous serial interface supports conventional SPI communication and a two-wire control mode for isolation-oriented designs. The device is optimized for low power, with a cited consumption of 1.4 mW, making it suitable for compact, precision-oriented measurement systems.

Typical uses include factory automation, process monitoring, load-cell and pressure-transducer measurement, temperature acquisition, portable instrumentation, and low-level industrial sensor interfaces. The four differential input channels allow a compact controller to monitor several related bridges without requiring a separate analog multiplexer.

Designers should pay close attention to input common-mode range, reference accuracy, digital filtering, and data-rate selection. Differential routing should minimize mismatched traces and ground-loop area, while the serial interface and converter clock require clean layout to preserve conversion accuracy.

This product page combines the manufacturer’s core specifications, application guidance, package information, and drop-in replacement assessment. It also distinguishes electrical fit from mere functional similarity, helping engineers determine whether a proposed replacement is truly pin-compatible before committing to a board revision.

جێگرەوەکانی جێگۆڕکێ بۆ ADS1213P — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.

جۆرەکان لەم زنجیرەیەدا

مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS1213P (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Programmable Gain Amplifier, Resolution, Input Architecture, Mounting Type.

Texas Instruments
Package: 18-pin PDIP (through-hole)
Programmable Gain Amplifier: 1 to 128
Resolution: 24 bits
بەراوردکردن لەگەڵ ADS1213P →
Texas Instruments
Package: 28-pin SSOP
Programmable Gain Amplifier: Programmable
Input Architecture: Differential inputs
بەراوردکردن لەگەڵ ADS1213P →

هیچ جێگرەوەی ڕاستەوخۆ بۆ ئەم بەرهەمە بەردەست نییە.

داوای جێگرەوەکان بکە

ADS1213P زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان

Converter Type Delta-sigma ADC
وردی 22 bit
Maximum Conversion Rate 6.25 kSPS
Input Multiplexer Channels 4 channels
Input Architecture Differential input
Effective Resolution at 10 Hz 20 bit
Effective Resolution at 1 kHz 16 bit
Power Consumption 1.4 mW
ڤۆڵتیەی دابینکردن 5 V
Programmable Gain Amplifier Yes
Internal Voltage Reference Yes
Digital Interface SPI-compatible synchronous serial interface
Secondary Control Interface Two-wire control mode
پاکێج 24-pin plastic DIP
جۆری دامەزراندن Through-hole

ڕێنمایی ڕێکخستنی پینی ADS1213P 24-pin plastic dip

ڕێکخستنی پین بۆ ADS1213P (پاکێجی 24-pin plastic dip). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.

نەخشەی پینئاوتی پاکێجی 24-pin plastic dip بۆ ADS1213P

هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS1213P.

سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.

بەکارهێنانە باوەکان

ADS1213P گونجاوە بۆ 6 بەکارھێنانs: Load-Cell and Strain-Gauge Measurement, Industrial Process Monitoring, Precision Temperature Acquisition, Battery-Powered Portable Instrumentation, Test and Measurement Equipment, Power and Energy Monitoring.

🏭

Load-Cell and Strain-Gauge Measurement

The ADS1213P fits precision bridge measurements where a weak differential output must be digitized without adding a separate analog front end. Its four differential input channels allow several bridge or transducer signals to share one converter, while programmable gain accommodates small full-scale outputs. The 20-bit effective resolution at 10 Hz is useful for slow force, pressure, or displacement measurements, and the 24-pin plastic DIP package simplifies through-hole instrumentation. Check the common-mode range and bridge excitation voltage before finalizing the front end.

🏭

Industrial Process Monitoring

For industrial process control, the ADS1213P can acquire several low-level differential sensor channels while occupying a single through-hole package. Its 6.25-kSPS maximum conversion rate is suitable for supervisory process variables, and the selectable conversion rate allows lower rates to be used when higher effective resolution is more valuable. Differential inputs help reject common-mode voltage present in factory wiring. A robust design should include input protection, shield routing, and isolation barriers where the measured equipment can carry large ground-potential differences.

🌡️

Precision Temperature Acquisition

The ADS1213P is appropriate for RTD, thermocouple-interface, or other temperature systems that use low-level differential signals. Programmable gain permits a closer match to the sensor output, while slow-rate operation provides 20-bit effective resolution at 10 Hz for stable thermal readings. Its four-channel input multiplexer can reduce the number of separate converter packages in multi-zone instrumentation. The design should use matched input traces, suitable cold-junction compensation where required, and an input network that protects the ADC from sensor faults.

📱

Battery-Powered Portable Instrumentation

The ADS1213P combines 22-bit conversion capability with a cited 1.4 mW consumption, making it appropriate for portable measurement equipment that cannot continuously use a high-power laboratory ADC. The four differential inputs reduce the number of conversion channels that must be multiplexed elsewhere, and the internal voltage reference simplifies system architecture. Low-rate operation offers 20-bit effective resolution at 10 Hz for slow environmental or physiological measurements. Power-budget calculations should include the MCU, interface activity, sensor excitation, and regulator quiescent current.

🖥️

Test and Measurement Equipment

Instrumentation and automated test equipment can use the ADS1213P to acquire low-level differential voltages at controlled rates. The converter’s 22-bit nominal resolution and selectable data rate provide flexibility when a test profile alternates between slow, high-resolution readings and faster sampling. Four differential inputs can reduce the analog front-end count in multi-channel fixtures, while the 24-pin plastic DIP package is convenient for through-hole prototype and legacy instrument designs. Calibration code and filtering must match the selected conversion rate.

⚡

Power and Energy Monitoring

The ADS1213P can digitize small differential voltage signals associated with current-shunt, voltage-divider, or power-quality monitoring circuits. Differential input handling is useful when the measurement is referenced around a biased or elevated node, and the four-channel multiplexer supports multiple monitored rails or phases. The 6.25-kSPS ceiling is adequate for many supervisory power measurements rather than high-bandwidth waveform capture. Shunt excitation, common-mode limits, isolation strategy, and galvanic safety requirements should be evaluated before implementation.

What is the ADS1213P?
The ADS1213P is a Texas Instruments 22-bit, 6.25-kSPS delta-sigma analog-to-digital converter with four differential input channels, programmable gain, an internal voltage reference, and a 24-pin plastic DIP package. According to the TI ADS1213 product page, the converter is intended for precision measurement of low-level differential signals. Its architecture supports adjustable conversion speed and digital filtering, making it suitable for sensors, instrumentation, and industrial control systems.
What are the key specifications of ADS1213P that engineers should know?
The ADS1213P combines 22-bit resolution, a maximum conversion rate of 6.25 kSPS, four differential input channels, programmable gain, and an internal reference in a 24-pin plastic DIP package. According to the TI ADS1213 product information, it delivers 20-bit effective resolution at 10 Hz and 16-bit effective resolution at 1 kHz. Its SPI-compatible synchronous serial interface also supports a two-wire control mode for isolation-oriented interfaces.
Where can I download the ADS1213P datasheet PDF?
The official ADS1213P documentation is available through Texas Instruments’ ADS1213 product page at https://www.ti.com/product/ADS1213. The product page links the manufacturer’s datasheet and supporting technical documents. The distributor search results also identify ADS1213P as a 22-bit analog-to-digital converter with a 24-pin plastic DIP package. Use the TI document for authoritative pin descriptions, electrical limits, timing data, and application guidance.
Where can I find the ADS1213P pinout?
The ADS1213P pinout is published in the pin-configuration section of the TI ADS1213 datasheet, which is linked from the official product page at https://www.ti.com/product/ADS1213. The exact MPN uses a 24-pin plastic DIP package, so engineers should verify every signal name and supply connection against the manufacturer’s package drawing before laying out a PCB. The complete numbered pin list is not reproduced here.
What is the difference between ADS1213P and ADS1213UG4?
The ADS1213P and ADS1213UG4 belong to the ADS1213 family, but package compatibility must be confirmed before one can replace the other. The ADS1213P is identified as a 24-pin plastic DIP, while the family is also offered in DIP-24, SO-24, and SSOP-28 configurations. Because a mechanically different package cannot be treated as a true PCB drop-in, verify the ordering table and pin diagrams in the TI ADS1213 documentation.
What is the best drop-in replacement for ADS1213P?
No alternate ADS1213P part is established here as a verified, pin-compatible drop-in replacement. The available family references identify ADS1213UG4 and ADS1213PG4, but their package suffixes must be checked against the ADS1213P 24-pin plastic DIP footprint and full pin assignment. A valid replacement must preserve the 22-bit conversion function, differential inputs, programmable gain, supply arrangement, and SPI-compatible interface—not merely the ADS1213 family name.
Can ADS1213UG4 replace ADS1213P on the same PCB?
ADS1213UG4 should not be assumed to replace ADS1213P on the same PCB because package compatibility is not established by the family relationship alone. The ADS1213P uses a 24-pin plastic DIP package, whereas the ADS1213 family includes several package options, including DIP-24, SO-24, and SSOP-28. Confirm the exact mechanical drawing, pin numbering, and exposed functional differences in the TI ordering information before treating any variant as interchangeable.
When should I choose ADS1213P over another precision ADC?
Choose the ADS1213P when a design needs 22-bit delta-sigma conversion, four differential inputs, programmable gain, an internal reference, and a maximum rate of 6.25 kSPS in a through-hole 24-pin DIP package. It is particularly suitable for low-level bridge or transducer measurements where differential input handling and adjustable conversion speed are important. Choose another ADC when its channel count, package, interface, or sampled-data rate better matches the system.
Is ADS1213P suitable for low-level sensor measurement?
Yes, the ADS1213P is suitable for low-level differential sensor measurement. According to the TI product information, it provides 22-bit nominal resolution, differential inputs, programmable gain, and an internal voltage reference. The effective resolution of 20 bits at 10 Hz supports precise low-rate measurements, while 16-bit effective resolution at 1 kHz supports faster monitoring. Input range, common-mode limits, and noise behavior must still be checked against the sensor output.
How much power does ADS1213P consume?
The ADS1213P has a cited low-power consumption of 1.4 mW. According to the Texas Instruments ADS1213 feature information, this low power supports precision measurement systems that operate continuously or from constrained supplies. Actual system consumption depends on supply voltage, selected data rate, digital-interface activity, and operating mode, so use the manufacturer’s operating-current and power tables for final thermal and battery-life calculations.
What is the difference between 22-bit resolution and 20-bit effective resolution on ADS1213P?
The 22-bit value describes the converter’s nominal digital output resolution, while the 20-bit effective-resolution figure describes usable noise performance at a 10 Hz conversion condition. According to the ADS1213 feature information, effective resolution is 16 bits at 1 kHz. This distinction matters because the fastest data rate provides more bandwidth but less output-code resolution, making the configured data rate central to selecting a filter and expected measurement accuracy.
Does ADS1213P support SPI and two-wire control modes?
Yes. The Texas Instruments ADS1213 family uses a flexible synchronous serial interface that is compatible with SPI and also offers a two-wire control mode. According to the TI ADS1213 product page, the interface supports four-wire SPI-style communication for conventional MCU or DSP connections and a simplified two-wire mode for low-cost isolation. The exact data format, timing, and supported read modes should be taken from the serial-interface section of the datasheet.
Where can I buy ADS1213P online?
Use the Request a Quote form on this page to request ADS1213P availability, current pricing, and lead time. The product is identified by Texas Instruments as a 22-bit, four-input delta-sigma ADC in a 24-pin plastic DIP package. Because distributor inventory and commercial terms change frequently, request the exact suffix ADS1213P rather than a generic ADS1213 device, and specify the required delivery quantity and packaging format.
What is the price of ADS1213P?
Current ADS1213P pricing depends on quantity, availability, and purchase terms. Use the Request a Quote form on this page to obtain the current commercial offer for the exact 24-pin plastic-DIP suffix. The request should specify the required order quantity, delivery date, and shipment destination so that the resulting quote reflects the intended procurement rather than a generic ADC family price.
What is the lead time for ADS1213P and is it in stock?
Request the current ADS1213P stock position and lead time through the Request a Quote form on this page. The exact suffix and order quantity are necessary because availability can vary by package, quantity, and delivery schedule. Do not infer an in-stock condition from a distributor listing or general product page; confirm the allocation and committed delivery date in the returned quotation.

داتای سەرچاوەی ئەندازیاری بۆ ADS1213P — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.

ڕێنمایی هەڵبژاردن

Choose ADS1213P when the design needs four differential inputs, programmable gain, an internal reference, and high nominal resolution in a 24-pin through-hole package. It is well suited to load cells, low-level bridge sensors, process monitoring, and portable instruments where a 6.25-kSPS ceiling and selectable resolution-versus-speed behavior are acceptable. Consider ADS1254E when you need a surface-mount precision delta-sigma platform and can accommodate its package-specific design requirements. Consider ADS1252U for another delta-sigma configuration when its package, interface, and electrical ratings better match the design. Consider MCP3424-E/SL for lower-rate, compact multichannel measurements where a 22-bit delta-sigma implementation is unnecessary. ADS1213UG4 and ADS1213PG4 are family references, but they must not be treated as drop-in substitutes unless their package dimensions and pin assignments are verified against the ADS1213P footprint.

بەراوردکردن لەگەڵ جێگرەوەکان

پارامەتر ئەم بەرهەمە
Package 24-pin plastic DIP
Brand Texas Instruments
Resolution 22 bit
Maximum Conversion Rate 6.25 kSPS
Input Channels 4 differential channels
Effective Resolution at 10 Hz 20 bit
Effective Resolution at 1 kHz 16 bit
Power Consumption 1.4 mW
Programmable Gain Amplifier Yes
Internal Voltage Reference Yes

جیاکەرەوە سەرەکییەکان

  • Combines four differential inputs with programmable gain (بەراورد بەMCP3424-E/SL)
  • Higher nominal resolution than a conventional 16-bit-class conversion choice (بەراورد بەMCP3424-E/SL)
  • Through-hole package supports simple prototype and legacy-instrument assembly (بەراورد بەADS1254E)

تێبینییەکانی دیزاین

Route differential inputs as a tightly coupled pair and keep the traces short and symmetric. Avoid sharing return paths with high-current switching nodes, and place input filtering close to the ADC pins. Differential performance depends on keeping parasitic mismatch and ground-loop pickup small; verify the completed board with the intended sensor, cable, or source impedance rather than relying only on the converter’s intrinsic resolution.

Decouple the 5 V supply at the device with the capacitance and placement specified in the TI ADS1213 application guidance. Reference and supply noise can appear directly in the conversion result, so use separate return paths for analog and digital currents where practical. Verify startup, settling, and supply-noise behavior with the selected data rate and filter configuration rather than assuming converter resolution alone determines usable accuracy.

Choose the conversion rate and digital filter as a linked decision. Effective resolution is 20 bits at 10 Hz but 16 bits at 1 kHz, so requesting a faster rate can reduce observable code quality while increasing throughput. Also confirm that the source stays within the ADC input and common-mode limits; programmable gain does not remove saturation or common-mode-range constraints.

Use a low-noise, stable reference arrangement and avoid routing the analog input or reference adjacent to the SPI clock and data traces. If the serial bus is long or the digital ground current is substantial, terminate it appropriately and use a grounded shield where needed. Inspect the digital interface timing at the selected clock rate and avoid excessive slow edges that increase settling time and radiated noise.

زانیاری پابەندبوون

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بێ قوڕقوشم
Unknown
بێ ھالۆجین
Unknown
کانزا ناکۆکەکان
Unknown

The identified sources describe the ADS1213 family but do not expose explicit compliance statements for the exact ADS1213P suffix. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status in the current manufacturer product documentation before release.

داتا پشتڕاستکراوەتەوە لە: 2026-11-03 — داتا لەلایەن تیمی ئەندازیاری پێکھاتەکانی XAIPART پشتڕاستکراوەتەوە و ڕێکخراوە

گەڕانە پەیوەندیدارەکان

ADS1213P datasheet ADS1213P pinout ADS1213P datasheet pdf ADS1213P specifications ADS1213P 24 pin DIP ADS1213P equivalent ADS1213P replacement ADS1213P cross reference ADS1213P vs ADS1213UG4 ADS1213P price ADS1213P stock Texas Instruments ADS1213P

پێکهاتە و زاراوە پەیوەندیدارەکان

Texas Instruments ADS1213P ADS1213 ADS1213UG4 ADS1213PG4 delta-sigma ADC analog-to-digital converter data-converter IC precision measurement differential input programmable gain amplifier PGA internal voltage reference SPI-compatible interface SSI interface 22-bit resolution 6.25 kSPS 20-bit effective resolution 24-pin plastic DIP through-hole package industrial process monitoring load-cell measurement power monitoring RoHS REACH
داواکاری نرخی خێرا RFQ
وردەکارییەکانی تەواو پڕ بکەرەوە — تیمی فرۆشتنی ئێمە لە ماوەی 24 کاتژمێردا وەڵام دەداتەوە
ژمارەی پارچە بەرهەمهێنەر پاکەت QTY نرخی ئامانج کۆی گشتی
✓
نرخەکە نێردرا!

لە ماوەی ٢٤ کاتژمێردا وەڵامی ئیمەیڵەکەت دەدەینەوە

1
داواکاری نرخ پێشکەشکرا
2
نرخپێدان وەرگیرا
3
داواکاری دانرا
4
پارەدان
5
نێردرا
6
گەیەنراوە
بینینی وردەکاریی داواکاری نرخ