ADS1240E - 24-Bit, 4-Channel Delta-Sigma ADC | TI
MPN: ADS1240E ✓ چالاکADS1240E گشتی
A delta-sigma ADC is a data-converter category that uses oversampling, noise shaping, and digital filtering to obtain high resolution from low-frequency or near-DC signals. The ADS1240E belongs to the broader ADC > delta-sigma ADC > precision data-converter hierarchy and is designed for sensors whose useful bandwidth is much lower than the converter's sampling capability. Its 24-bit no-missing-code operation and 21-bit effective resolution support accurate measurement of small signals from bridges, strain gauges, thermocouples, and industrial transducers.
Key features include programmable PGA gains from 1 through 128, 0.0015% integral nonlinearity, and simultaneous 50 Hz and 60 Hz rejection of at least 90 dB. Single-cycle settling helps reduce the time required to establish each conversion result. The SPI-compatible serial interface and up to eight configurable I/O pins simplify connection to microcontrollers, programmable logic, and dedicated industrial controllers while supporting alarm, excitation, and digital control functions.
The converter uses a delta-sigma architecture to trade conversion speed for resolution and noise performance. At a 30-SPS data rate, the architecture is appropriate for slow sensor signals rather than waveform sampling. The programmable PGA accepts low-level inputs while reducing the signal range that must be resolved by the converter. Select the gain, data rate, digital filter configuration, and input reference according to the sensor output range, common-mode voltage, required update rate, and rejection of line-frequency interference.
Typical uses include smart transmitters, industrial process-control loops, electronic weight scales, chromatography systems, portable instrumentation, pressure measurement, and low-level bridge excitation. The four-input architecture allows multiple sensor channels to share the converter when each can meet the settling time, common-mode range, and filtering requirements of the selected configuration.
For layout, keep analog input and reference traces short, place input filtering and decoupling capacitors close to their associated pins, and use a quiet ground return for the converter. A solid ground plane and separation from switching nodes reduce coupling into the high-resolution front end. Verify the reference voltage, common-mode limits, input filtering, and digital interface timing before committing the PCB layout.
This product record combines manufacturer specifications with practical guidance for sensor measurement design, application selection, interface planning, and replacement evaluation. It also identifies same-footprint alternatives and clearly distinguishes drop-in options from devices that would require a different package or redesigned analog interface.
جێگرەوەکانی جێگۆڕکێ بۆ ADS1240E — هەمان پاکەت، پین بە پین گونجاو. ئەو بەشانەی پاکەتی جیاوازیان هەیە و پێویستیان بە چاککردنەوەی PCB هەیە لابراون.
جۆرەکان لەم زنجیرەیەدا
مۆدێلەکانی هەمان زنجیرە کە بە شێوەی ڕاستەوخۆ گونجاون لەگەڵ ADS1240E (هەمان شێوە و پێکهاتەی شوێن) — جیاوازە لە Package, Resolution, Digital Interface, Number of Input Channels, Programmable Gain Amplifier.
ADS1240EG4
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADS1241EG4
✅ جێگرەوەی ڕاستەوخۆ📋 جێگرەوەی سەرچاوە (لە کاتالۆگدا نییە)
ADS1241E
✅ جێگرەوەی ڕاستەوخۆ ⚠️ تایبەتمەندییەکان پشتڕاست نەکراونەتەوەپەیوەندی بۆ نرخ
بینینی داتاشیت →ADS1240E زۆرترین ڕێژە و تایبەتمەندییە کارەباییەکان
| Converter Type | 24-bit delta-sigma ADC |
| وردی | 24 bits |
| Effective Resolution | 21 bits |
| No Missing Codes | 24 bits |
| Analog Input Channels | 4 channels |
| Maximum Data Rate | 30 samples per second |
| Supply Voltage Range | 2.7 V to 5.25 V |
| Programmable Gain | 1 to 128 |
| Integral Nonlinearity | 0.0015% |
| 50 Hz and 60 Hz Rejection | 90 dB minimum |
| Effective Resolution at PGA Gain 1 | 21 bits |
| Effective Resolution at PGA Gain 128 | 19 bits |
| Settling Behavior | Single-cycle settling |
| Digital Interface | SPI-compatible serial interface |
| Configurable I/O Pins | Up to 8 pins |
| مەودای پلەی گەرمیی کارکردن | -40°C to +85°C |
| پاکێج | 24-SSOP |
| جۆری دامەزراندن | Surface mount |
ڕێنمایی ڕێکخستنی پینی ADS1240E 24-ssop
ڕێکخستنی پین بۆ ADS1240E (پاکێجی 24-ssop). ئەم پێکھاتە ئەنالۆگە پینی چوونەژوورەوە، دەرچوون و دابینکردنی وزەی ھەیە. سەرنج بدە بە داتاشیتی بەرھەمھێنەر بۆ ڕێکخستنەکانی پینی لادانی ئۆفسێت، قەرەبووکردنەوە و چالاککردن. گونجاوە بۆ ڕێکخستنی ئیشارەت و خولەکانی بەرزکەرەوە.
هیچ داتای وردی پینئاوت بەردەست نییە بۆ ADS1240E.
سەرنج بدە بە داتاشیت بۆ ڕێکخستنی تەواوی پینەکان.
بەکارهێنانە باوەکان
ADS1240E گونجاوە بۆ 6 بەکارھێنانs: Industrial Process Control, Precision Weight Scales, Smart Transmitters, Pressure and Load Measurement, Chromatography and Laboratory Instrumentation, Portable Measurement Instruments.
Industrial Process Control
The ADS1240E suits low-speed process instrumentation where a 4-20 mA transmitter or resistance sensor produces a small differential signal. Its four analog inputs allow several measurement channels to share one converter when each remains within the selected common-mode and PGA limits. With 24-bit nominal resolution, up to 21 bits of effective resolution at PGA gain 1, and PGA gains from 1 to 128, the ADC can preserve fine process information without using a high-speed data converter. The SPI-compatible interface also connects conveniently to industrial controllers. Design the input network and excitation system for the specific sensor, then configure filtering to reject 50 Hz and 60 Hz interference while preserving the required process update rate.
پێشنیارکراو
Precision Weight Scales
The ADS1240E is appropriate for electronic weight-scale and bridge-sensor designs that prioritize resolution over rapid acquisition. A load-cell bridge produces a small differential voltage proportional to applied force, and the programmable PGA gains from 1 to 128 bring that signal into the converter's useful range. The 24-bit output, 0.0015% integral nonlinearity, and single-cycle settling support accurate static or slowly changing weight readings. Simultaneous 50 Hz and 60 Hz rejection can suppress mains-related pickup when the correct filter and data-rate combination is selected. Practical implementation still requires excitation-voltage stability, low-noise ratiometric measurement, mechanical vibration control, and careful grounding of the bridge and converter.
پێشنیارکراو
Smart Transmitters
The ADS1240E can form the measurement core of a smart transmitter that conditions a low-level sensor signal before conversion and digital forwarding. Its four inputs support multiple sensor or reference channels, while the PGA allows front-end gain to be selected without immediately relying on a separate instrumentation amplifier. The 2.7 V to 5.25 V operating range supports compact industrial electronics, and the SPI-compatible interface provides a straightforward link to a microcontroller or digital transmitter controller. Because the converter is optimized for low-frequency signals, applications should reject high-frequency noise before the ADC where possible and configure the digital filter for the required response time. Stable excitation and reference sources are essential for predictable measurement accuracy.
پێشنیارکراو
Pressure and Load Measurement
The ADS1240E fits pressure transmitters, force sensors, and load-cell front ends that generate low-level differential outputs. Its PGA gains from 1 to 128 help maximize the usable converter range for millivolt-level sensor signals, while 24-bit nominal resolution supports fine calibration and compensation. At rates up to 30 samples per second, the device is well matched to static pressure and force readings where mechanical settling time dominates overall response. The specified 90 dB minimum simultaneous 50 Hz and 60 Hz rejection can reduce utility-frequency pickup in the selected filter mode. For reliable results, verify the sensor bridge's excitation and common-mode limits, use ratiometric measurement when appropriate, and isolate sensitive analog traces from switching and high-current paths.
پێشنیارکراو
Chromatography and Laboratory Instrumentation
The ADS1240E can support chromatographic detectors and portable laboratory instruments that measure low-level, slowly varying analog signals. Its 24-bit conversion resolution and programmable gain suit detector outputs requiring more precision than a general-purpose 12- or 16-bit ADC, while the four-input arrangement can handle a detector, reference, or auxiliary sensor channel. Single-cycle settling helps preserve throughput at the specified conversion rate. The device is most appropriate when the source bandwidth is low enough for delta-sigma filtering and when a 30-SPS maximum rate meets the experiment's timing needs. Instrument designers should provide clean excitation, a low-noise reference, carefully shielded analog routing, and firmware configuration that matches each filter mode's settling time and line-frequency rejection.
پێشنیارکراو
Portable Measurement Instruments
The ADS1240E is useful in portable instrumentation where battery efficiency, compactness, and high-resolution readings are important. Its delta-sigma architecture supports precision measurements from slowly varying sensors without the continuous sampling demand of a high-speed converter, while its configurable GPIO pins can simplify peripheral control. Four input channels can reduce the number of separate converters required in a multi-sensor instrument. The 2.7 V minimum supply voltage supports integration into compact systems, but power budgeting should account for the converter, interface, excitation source, and regulator. Use the SPI-compatible interface to retrieve results, select a PGA gain that protects the ADC from overvoltage, and configure the digital filter to balance conversion latency, noise rejection, and battery-powered update energy.
پێشنیارکراو
کورتەی بەرهەمە پێشنیارکراوەکان
داتای سەرچاوەی ئەندازیاری بۆ ADS1240E — بەراوردکردن، ڕێنمایی دیزاین و زانیاری پابەندبوون.
ڕێنمایی هەڵبژاردن
بەراوردکردن لەگەڵ جێگرەوەکان
| پارامەتر | ئەم بەرهەمە | ADS1240EG4 | ADS1241EG4 | ADS1241E |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 24-SSOP | 24-SSOP - same package | 24-SSOP - same package | 24-SSOP - same package |
| Resolution | 24 bits | 24 bits | 24 bits | 24 bits |
جیاکەرەوە سەرەکییەکان
- Direct same-family package option (بەراورد بەADS1240EG4)
- Established precision conversion performance (بەراورد بەADS1241EG4)
- Direct conversion for low-level sensor signals (بەراورد بەADS1241E)
تێبینییەکانی دیزاین
Route the four analog inputs, reference connections, and analog ground as short and quiet as practical. Keep optional input filters close to the ADC pins so that unwanted coupled noise does not propagate into the PGA and modulator. A continuous ground plane generally provides a lower-impedance return path than fragmented routing. Confirm pin locations against the official 24-SSOP pin-configuration diagram before defining the footprint, and verify the manufacturer's recommended land pattern rather than using a generic SSOP land pattern.
Configure the digital filter and data rate for the specific interference environment. The ADS1240E can provide at least 90 dB simultaneous 50 Hz and 60 Hz rejection in the applicable filter mode, but that performance depends on clock accuracy, filter selection, and system bandwidth. Place the converter away from switching regulators, relay drivers, and high-current edge paths. If a strong interferer cannot be removed digitally, add differential filtering or shielding before the input reaches the PGA.
Use separate, well-decoupled analog and digital supply paths unless the manufacturer application guidance specifies another topology. Place the required input and bypass capacitors adjacent to the relevant supply pins, observe the capacitor voltage and tolerance requirements from the datasheet, and avoid long shared supply traces. For bridge or ratiometric measurements, verify that excitation and reference noise do not dominate the converter's 24-bit nominal resolution. Validate supply sequencing and startup behavior before enabling the external analog front end.
Do not select ADS1240E as a waveform-sampling ADC merely from its 24-bit resolution. Its delta-sigma architecture is optimized for low-frequency measurement and provides selectable filtering and settling behavior. Likewise, the 128 maximum PGA gain must be paired with an input common-mode level that remains valid for that gain. Check overvoltage, common-mode limits, reference voltage, filter latency, and calibration method against the sensor operating range before releasing the PCB design.
زانیاری پابەندبوون
No definitive compliance declarations for the exact ADS1240E orderable configuration were identified in the cited product pages. Check the current Texas Instruments material declaration or product environmental information before regulatory submission.